Home

D-Link DCS-2310L

1. Back Next Cancel 46 Section 4 Configuration Step 3 This step allows you to specify how you will receive event notifications from your camera You may choose not to receive notifications or to receive notifications via e mail or FTP Please enter the relevant information for your e mail or FTP account Click Next to continue Step 4 You have completed the Motion Detection Wizard Please verify your settings and click Apply to save them Please wait a few moments while the camera saves your settings and restarts D Link DCS 2310L User Manual This final step allows you to specify how you receive notification of camera events Choose between an email notification or alternatively you can setup an FTP Notification You will need your email account settings or FTP details If you are unsure of this information please contact your ISP Once you have entered this information please click on the Next button Do not notify me Email Sender email address Recipient email address Server address User name Password Port Server address Port User name Password Remote folder name You have completed your IP camera setup Please dick the Back button if you want to review or modify your settings or dick on the Apply button to save and apply your settings Motion Detection Disable EVENT Video Clip Schedule Day Sun Mon Tue Wed Thu Fri Sat Schedule Time From0 0T023 59
2. Recording Settings Recording Settings Each of the recording settings will open a further menu Do not record any video clips Record video clips when motion is detected Record video clips by schedule D Link DCS 2310L User Manual 34 Section 3 mydlink Recording Settings Record video clips Select this option to enable the automatic recording when motion when motion is is detected detected Add Detection Area Click on this icon to draw areas that will trigger automatic recording when motion is detected Remove Detection Area Click on this icon to erase areas from regions that trigger automatic recording when motion is detected af Clear Detection Area This will remove all detection areas Refresh Snapshot This will refresh the current snapshot of the monitored area Increase Decrease Sensitivity Increase the motion y detection sensitivity Email Notification Toggles notification by email on or off Video Clips Recording Inthe event that the microSD card can not store further recordings Mode the user can choose to record over previous recordings or to be notified and cease recording D Link DCS 2310L User Manual Recording Settings Do not record any video clips Record video clips when motion is detected 1 Motion detection A g te 2 E mail notification Enable e mail notification 3 Video clips The inserted MicroSD c
3. 947 matching video clip s were found Id lt lt pp Di Dd amp Cannot see the video Please download and install the plug in D Link DCS 2310L User Manual 33 Section 3 mydlink Settings The Settings tab contains several options for you to control how your DCS 2310L faydiink OPSiance DCS 2310L Live View Playback Settings Gg Camera Name Click on the Edit button to change how the camera name appears ae TT Camera Name DCS 2310L eat mydlink No This is the unique mydlink number for your device mink No sum Model name This shows the model name of the camera EEn zona 162408 Recording Settings Do not record any video clips MAC The shows the Media Access Control MAC address of the camera Record video clips when motion is detected Camera Activated on The date the camera was registered to the mydlink service D Record video cips by schede Advanced Settings You can click the Advanced Settings button to access your camera s advanced settings After clicking the button use the username and password below to log in Event Notification Email notification of events can be switched on or off Settings TREE ARN _ Advanced Setting You can remove your camera by clicking Delete Camera button Delete Camera Global D Link About mydlink Terms of Use Privacy Policy Contact Us Copyright 2008 2012 D Link Corp All rights reserved
4. Add Recording Here you can configure and schedule the recording settings After making any changes click the Save Settings button to save your changes Recording entry name Enable this recording Priority Source Recording schedule Recording settings Destination Total cycling recording size D Link DCS 2310L User Manual The unique name of the entry Select this to enable the recording function Set the priority for this entry The entry with a higher priority value will be executed first The source of the stream Scheduling the recording entry Configuring the setting for the recording Select the folder where the recording file will be stored Please input a HDD volume between 1MB and 2TB for recording space The recording data will replace the oldest record when the total recording size exceeds this value For example if each recording file is 6MB and the total cyclical recording size is 600MB then the camera will record 100 files in the specified location folder and then will delete the oldest file and create new file for cyclical recording Please note that if the free HDD space is not enough the recording will stop Before you set up this option please make sure your HDD has enough space and it is better to not save other files in the same folder as recording files LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP Setup Wizard Se You can setup schedule recording to network storage with your
5. Device Name DCS 2310L mydlink Number 44441252 Network name SSID ddddddd Admin Password oic953XZ You can change these default settings by going to Advanced Settings after add it to your device list Not now D Link DCS 2310L User Manual 18 Section 2 Installation Zero Configuration will navigate to the mydlink Live View tab for your camera INi k aii mydlin where you will see a screen similar to the following My Profile 7 eee Live Video Playback Settings Events Your camera is now set up and you can skip to mydlink on page 30 to learn more eS about the mydlink features of this camera or to Configuration on page 39 for seal tage Sa teeta advanced configuration of your camera di dai a a D Link DCS 2310L User Manual 19 Section 2 Installation Camera Installation Wizard Insert the Installation CD ROM into your computer s optical drive to start the autorun program The CD ROM will open the Camera Installation Wizard Simply click Setup Your Camera to go through the Installation Wizard which will guide you through the installation process from connecting your hardware to configuring your camera M DCS 2310L Setup Your Camera Connect your camera to the network and the internet Register to mydlink service to view your camera anywhere anytime Install D View Cam An alternative way to view your camera by installing the D View Cam software es Camera User Manual Quick
6. Supports a Variety of Platforms Supporting TCP IP networking HTTP and other Internet related protocols The DCS 2310L can also be integrated easily into other Internet Intranet applications because of its standards based features The DCS 2310L offers Ethernet Fast Ethernet connectivity making the DCS 2310L easy to integrate into your existing network environment The DCS 2310L works with a 10Mbps Ethernet based network or 100Mbps Fast Ethernet based network for traditional wired environments Web Configuration Using a standard Web browser administrators can configure and manage the Network Camera directly from its own Web page via Intranet or Internet This means you can access your DCS 2310L anytime anywhere in the world Broad Range of Applications With today s high speed Internet services the Network Camera can provide the ideal solution for delivering live video images over the Intranet and Internet for remote monitoring The Network Camera allows remote access using a Web browser for live image viewing and allows the administrator to manage and control the Network Camera anytime anywhere in the world Many applications exist including industrial and public monitoring of homes offices banks hospitals child care centers and amusement parks Remote Monitoring Utility The D ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to configure and access the Network Camera from a r
7. 2011 02 02 23 47 58 admin FROM 192 168 0 100 SET PROFILE 1 Frame Size 800x600 2011 02 02 23 46 34 admin FROM 192 168 0 100 SET VIDEO CODEC Need Reset 2011 02 02 23 46 34 admin FROM 192 168 0 100 SET ASPECT RATIO 4 3 2011 02 02 23 43 36 admin LOGIN OK FROM 192 168 0 100 2011 02 02 23 40 53 IP CAMERA ACQUIRE DHCP IP 192 168 0 101 2011 02 02 23 40 48 SYSTEM SET IR LIGHT OFF 2011 02 02 23 40 48 SYSTEM BOOTING Helpful Hints You can save the log to your local hard IF camera by dicking the Download button and yo the log by dicki Clear button an dear ng on the 77 Section 4 Configuration Help This page provides helpful information regarding camera operation DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS STATUS LIVE VIDEO SETUP Setup Wizard Network Setup Dynamic DNS Image Setup Audio and Video Preset Motion Detection Time and Date Event Setup SD Card ADVANCED MAINTENANCE STATUS Device Info Log D Link DCS 2310L User Manual Appendix B Technical Specifications Camera Hardware Profile Camera Image Features Video Compression Video Resolution Audio Support External Device Interface Network Network Protocols Security D Link DCS 2310L User Manual Technical Specifications 1 4 Megapixel progressive CMOS sensor 5 meter IR illumination distance Minimum illumination O lux with IR LED on Built in Infrared Cut Removable
8. EN 2 Connect the Ethernet cable to an available LAN port on your router 2 On the router side Troubleshooting Manuals and Downloads Copyright 2009 2012 D Link Corporation Inc All rights reserved DCS 2310L Setup Wizard Select Connect Join Please confirm that the following tasks are done before clicking Next Plug in the cables 3 Plug the power adapter into the power outlet Please skip this step if your IP camera is connected with PoE Power over Ethernet 3 Plug in the power adapter Manuals and Downloads Troubleshooting Copyright 2009 2012 D Link Corporation Inc All rights reserved 22 Section 2 Installation The LED on the front of the DCS 2310L will blink then turn solid green once it successfully connects to your network Click Next to proceed If the LED continues to blink check your connections or click on the What should do if the LED stays red link for more information Select your camera from the list then click Next If you have multiple cameras you can identify them by the MAC ID printed on the label on the back of your camera Click Next to continue D Link DCS 2310L User Manual DCS 2310L Setup Wizard Plug in the cables Select Connect Join Please confirm that the following tasks are done before clicking Next 4 The LED on the camera will turn green when the device is ready
9. Helpful H Media name Snapshot Source Profile1 v Send 1 pre event image s 0 4 Send 1 post event image s 0 7 File Name Prefix E Add date and time suffix to file name 5 Video Clip Source Profile 1 v Pre event recording Second s 0 4 Maximum duration Second s 1 100 Maximum file size Kbytes 100 5000 File Name Prefix 5 System log Save Settings Don t Save Settings SECURITY 64 Section 4 Configuration Add Event Create and schedule up to 2 events with their own settings here After making any changes click the Save Settings button to save your changes Net p z 5 RS gt Event name Enter a name for the event NE You can set at most 2 events like motion detection or digital input trigger here and arrange the detection schedule at the same time Save Settings Don t Save Settings Pre EVENT Enable this event Select this box to activate this event E Enable this event Priority normal v Priority Set the priority for this event The event with higher EEE niieg neme vent For moton detect and dotal nn priority will be executed first Video motion detection Periodic Delay Select the delay time before checking the next event It aug nd is being used for both events of motion detection and jad digital input trigger Passive Infrared sensor W Sun W Mon W Tue Wed E Thu E Fri Wl Sat Time Trigger Specify
10. Profile 2 Wy Set a Storage Folder Jen Video Profile 3 ad Listen Stop Audio In from microphone MU Full screen mode amp Start Stop Audio Out to speaker Taking a Snapshot Go To If any presets have been defined selecting a preset from this list will Preset List display it DAAH Bas 4 8 er D Link DCS 2310L User Manual 41 Section 4 Configuration Setup Setup Wizard To configure your Network Camera click Internet Connection Setup Wizard Alternatively you may click Manual Internet Connection Setup to manually configure your Network Camera and skip to Network Setup on page 48 In this section you can setup the IP camera s wired network interface settings If you are configuring this device for the first time D Link recommends that you click the Setup Wizard button and follow the instructions on screen If you wish to modify or configure the IP camera To quickly configure your Network Camera s motion detection settings click Motion EMM ee ronan oem to erabi the cones connecten setup Internet Connection Setup Wizard Manual Internet Connection Setup Detection Setup Wizard If you want to enter your settings without running the wizard click Manual Motion Detection Setup and skip toMotion Detection on page 58 EE en an stp the amer oton Detection stings I you are confourno follow the instructions on screen If you wish to modify or configure the Motion Detection manually dick manu
11. Section 2 Installation Confirm your camera login details and IP address details and click Done Your DCS 2310L camera is now set up Log on to your mydlink account and explore the exciting benefits available to you Your camera is now set up and you can skip tof mydlink on page 30 to learn more about the mydlink features of this camera or to Configuration on page 39 for advanced configuration of your camera D Link DCS 2310L User Manual vise nn ee DCS 2310L Setup Wizard Join mydlink service Plug Select If you choose not to register this camera to mydlink you won t be able to enjoy the benefits like remote view and mobile application from mydlink You still can use the camera IP address below for local view IP address 172 18 195 50 Account name admin Password XXXXXX DCS 2310L More details about your camera a Camera name Add a shortcut of camera IP address to my desktop and create a browser bookmark Copyright 2009 2012 D Link Corporation Inc All rights reserved FAQ Suppo Aydiink My Profile Welcome DCS 2310L Live View Playback Settings 44441711 0270342 0 02 rs ss Hes P8151 i f at 27 Section 2 Installation Manual Hardware Installation If you wish to set up your camera without using the Camera Setup Wizard please follow these steps Note In order to use the mydlink features of this product you will ne
12. Weatherproof Screw Covering 1 Weatherproof Cover Weatherproof protective panel 2 Protective Cable Cover Weatherproof cable connection cover 3 Ethernet Cable RJ45 Ethernet cable to connect to your network 4 Power Cable Connected to the included DC 5 V power adapter 5 Adjustment Ring Tighten or loosen the adjustment ring to adjust the camera s position 6 Speaker Audio output Weatherproof protective covering for enclosure screws D Link DCS 2310L User Manual Section 1 Product Overview Rear Internal 1 DC Power Connector Connected to the included DC 5 V power adapter 2 RJ45 Ethernet Port RJ45 connector for Ethernet 3 Reset Button Use a paperclip or similar tool to press and hold the recessed button for 10 seconds to reset the camera 4 SD Memory Card Slot Insert a MicroSD card for for storing recorded images and video D Link DCS 2310L User Manual 10 Section 1 Product Overview Removing the Top Panel Step 1 Place the camera face down on a non slip flat surface Step 2 Carefully pry out the two protective rubber screw coverings using a thin flat blade Step 3 Undo the two screws using a Philips 00 Screwdriver Step 4 Lift off the protective panel Note To ensure that the camera stays weatherproof users are advised to ensure that all the rubber seals are secured firmly in place D Link DCS 2310L User Manual 11 Section 1 Product Overview Removing the Power Cabl
13. devices such as mobile phones or PDAs The default port number is 554 You may specify the address of a particular stream For instance livel sdp can be accessed at rtsp x x x x videol sdp where the x x x x represents the ip address of your camera DHCP Static IP Client IP address Subnet mask Default router Primary DNS Secondary DNS W Enable UPnP presentation Enable UPnP port forwarding Forwarding Port Forwarding Status UPnP forwarding is inactive PPPOE SETTINGS Enable Disable User Name Password Confirm password PPPoE Status PPPoE is inactive HTTP port video 1 mjpg video2 mjpg Access name for streami Access name for stream2 Access name for stream3 HTTPS port 443 Authentication RTSP port 554 live1 sdp live2 sdp Access name for streami Access name for stream2 Access name for stream3 49 Section 4 Configuration Enable CoS Enable QoS Enable IPV6 Enable Multicast for stream D Link DCS 2310L User Manual Enabling the Class of Service setting implements a best effort policy without making any bandwidth reservations Enabling QoS allows you to specify a traffic priority policy to ensure a consistent Quality of Service during busy periods If the Network Camera is connected to a router that itself implements QoS the router s settings will override the QoS settings of the camera Enable the IPV6 setting to use the IP
14. hard drive by clicking Browse Uploads the new firmware to your camera EZ LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP e A new firmware upgrade may be available for your IP camera It is recommended to keep your IP camera firmware up to date to maintain and improve the functionality and performance of your internet IP camera Click here D Link Support Page to check for the latest firmware version available To upgrade the firmware on your IP camera please download and save the latest firmware version from the D Link Support Page to your local hard drive Locate the file on your local hard o by cacking the Browse button Once you have found and opened the file using the browse on dick the Upload button to start the firmware upgrade FIRMWARE INFORMATION Current Firmware Version 0 01 07 Current Product Name DCS 2310L FIRMWARE UPGRADE File Path 75 Section 4 Configuration Status Device Info This page displays detailed information about your device and network connection DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP Device Info Helpful Hints Log j 7 ase This page displays all the All of your network connection details are displayed on this page The firmware version is also EE Logout displayed here camera and network settings INFORMATION IP camera Name DCS 2310L Time amp Date Thu Feb 3 00 09 11 2011 Firmware Version 0 01 07 MAC Address FO 7D 68 0F B
15. m Md 1M Excellent v H 264 320x240 320x240 Save Settings Don t Save Settings SECURITY 54 Section 4 Configuration Video Quality Constant bit rate Fixed quality Audio in off Audio in gain level Audio out off Audio out volume level This limits the maximum frame rate which can be combined with the Fixed quality option to optimize the bandwidth utilization and video quality If fixed bandwidth utilization is desired regardless of the video quality choose Constant bit rate and select the desired bandwidth The bps will affect the bit rate of the video recorded by the camera Higher bit rates result in higher video quality Select the image quality level for the camera to try to maintain High quality levels will result in increased bit rates Selecting this checkbox will mute incoming audio This setting controls the amount of gain applied to incoming audio to increase its volume Selecting this checkbox will mute outgoing audio This setting controls the amount of gain applied to outgoing audio to increase its volume This section allows you to configure the sound and video of your camera You can configure different settings depending on whether you are viewing content from a PC or a Mobile Phone PDA VIDEO PROFILE 1 Mode Frame size View window area Maximum frame rate Video quality Constant bit rate Fixed quality VIDEO PROFILE 2 Mode Frame siz
16. naan meene E E eenen 8 Beal EXEC learene abies ornceeteinciens 9 Rear Internal esessessessesseseeseesessesseseeseesessesseseesessesseseeseese 10 Removing the Top Panel nennen 11 Removing the Power Cable 12 Replacing the Ethernet Cable uu eeseseseseseeenees 13 Reattaching the Top Panel escssssesesessseesesees 14 Removing the Bottom Panel uu sssssssssseseseseeeeeeees 15 USING TNE Reset Button esessessesessessessessesesseesessesseseeseeses 15 Installing an SD Memory Card uu eesesesesesesesssesesees 16 Reattaching the Bottom Panel ssseeseeseeeeees 16 HVS CM EIO E E A E 17 Zero Configuration SETUP nennen 17 Camera Installation Wizard ssesessessessesseseesessessesseseesess 20 Manual Hardware Installation 28 SD Memory Card Installation 29 AOM ee enten 30 Camara CS CIS rre E 31 UVO VUCO rea ai AA EE E EE 32 AEL oera A A EEEE 33 D Link DCS 2310L User Manual ICIS anneer E IEE N E EE penne tdneeonne 34 Recording SettingS se ssssessessessesessesseseeseesessesseseeseesesses 35 Advanced Settings s ssessessesseseeseesessesseseesessesseseeseesessesss 37 EVON ES capan EEA A E 38 Configuration naren nternet 39 Using the Configuration Interface 39 EVE MISO serenades ananantenken 40 SS EE 42 Setup Wizara oatesi antennen 42 Network SetUp se sscsssassssasccnsssatesncadecssnarscosactessisestobeosascayiees 48 Dynamic DNG sesia ORTAR 51 Mage OUD a E ts 52 Audio and kale 54 FUSS E E E
17. specify week day and time dyn period Image Se Save Settings Don t Save Settings Audio and Video RECORDING Recording entry name Enable this recording Priority normal v Source Profile 1 v RECORDING SCHEDULE V Mon W Tue W Wed WW Thu Mi Fri W Always From 00 00 To 23 59 RECORDING SETTINGS Destination None v Total cycling recording size 1000 Mbytes 200 2000000 Size of each file for recording 10 Yv Mbytes Time of each file for recording 10 seconds File Name Prefix Save Settings Don t Save Settings SECURITY 67 Section 4 Configuration Size of each file for recording If this is selected files will be separated based on the file size you specify Time of each file for recording If this is selected files will be separated based on the EEEIEE ns rise econ to network stome wth your sec mesk day and tie maximum length you specify Saves Bortse eins RECORDING File Name Prefix The prefix name will be added on the file name of the ns recording file s EN 5 Source Profle1 From The time range specified for the video dip Total cyclin recording s Mon Vl Wed WW Thu Always From 00 00 RECORDING SETTINGS Destination None v Total cyding recording size 1000 Mbytes 200 2000000 Size of each file for recording 10 Yv Mbytes Time
18. with a built in CPU and web server that transmits high quality video images for security and outdoor surveillance The DCS 2310L can be accessed remotely and controlled from any PC Notebook over your local network or through the Internet via a web browser The simple installation and intuitive web based interface offer easy integration with your Ethernet Fast Ethernet network The DCS 2310L weatherproof housing and Power over Ethernet make it an ideal solution for a complete and cost effective surveillance solution with an easy clutter free installation The remote monitoring infrared motion detection and event notifications features enable you be truly responsive to your surveillance deployment System Requirements e Computer with Microsoft Windows 7 Vista or XP for CD ROM Setup Wizard Mac OS or Linux e PC with 1 3GHz or above at least 128MB RAM e Internet Explorer 7 or above Firefox 3 5 or above Safari 4 and Chrome 8 0 or above e Existing 10 100 Ethernet based network e A MicroSD memory card optional is required for recording to onboard storage SDHC Class 6 or above is recommended e Broadband Internet connection D Link DCS 2310L User Manual 6 Section 1 Product Overview Features Simple to Use The DCS 2310L is a stand alone system with a built in CPU requiring no special hardware or software The DCS 2310L supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Firefox and Safari
19. your camera s advanced settings After clicking the button use the username and password below to log in Username admin Camera Password E Show password Advanced Setting You can remove your camera by clicking Delete Camera buiton Delete Camera The Advanced Settings page has been opened ina separate window Please do not leave or close this page until you close the new Advanced Settings window Otherwise your connection te the device may be broken DCS 2310L A LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS Helpful Hints In this section you can setup the IP camera s wired network interface settings If you are configuring this device for the first time D Link recommends that you dick the Setup Wizard button and follow the instructions on screen If you wish to modify or configure the IP camera settings manually dick manual setup to enable the IP camera connection setup In this section you can setup the IP camera s Motion Detection settings If you are configuring en device for the first time D Link recommends that you click the Setup Wizard button and follow the instructions on screen If you wish to modify or configure the Motion Detection manually click manual setup to enable the Motion Detection setup Motion Detection Setup Wizard Manual Motion Detection Setup SECURITY 37 Section 3 mydlink Events Record video clips Select this option to enable the automatic recordin
20. 4 The LED turns solid green What should do if the LED stays red Manuals and Downloads m n se DCS 2310L Setup Wizard Connect Join Select your camera from the list and click Next when you complete Select your camera Plug Camera MAC ID 2 IP address Connection OQ ocs 2310L F0 7D 68 0F BB 2D 192 168 0 101 DHCP Registered with mydlink Not registered NV Wired Check the MAC ID on the back of your camera 5 bre Cannot find your camera from the list d Troubleshooting Manuals and Downloads Copyright 2009 2012 D Link Corporation Inc All rights reserved 23 Section 2 Installation If you wish to remove the camera from a previously registered mydlink account press and hold the reset button on the rear panel for at least 10 seconds and click Restart to restart the Setup Wizard Press and hold the Reset button for at least 10 seconds while your camera is plugged in After resetting your camera click Restart to continue After you have selected your camera from the list you will be asked to essere B create and confirm a password for it The password is case sensitive and yd DCS 2310L Setup Wizard must contain at least 2 letters Select your camera Plug Connect Join Select your camera from the list and click Next when you complete CI IC k N ext to CO nti n U e Camera MAC ID 2 IP address Connectio
21. 55 0 on ie Authentication RTSP port Default Gateway The gateway used to forward frames to destinations in a hie Access name for stream2 different subnet Invalid gateway settings may cause the ee ce failure of transmissions to a different subnet a D 0 4095 Primary DNS The primary domain name server translates names to IP pn Event Alarm addresses hant E Enable QoS Secondary DNS The secondary DNS acts as a backup to the primary DNS breve D Link DCS 2310L User Manual 48 Section 4 Configuration Enable UPnP Presentation Enable UPnP Port Forwarding Enable PPPoE User Name Password HTTP Port Access Name for Stream 1 3 HTTPS Port RTSP Port D Link DCS 2310L User Manual Enabling this setting allows your camera to be configured as a UPnP device on your network Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable network Enable this setting if your network uses PPPoE Enter the username and password for your PPPoE account Re enter your password in the Confirm Password field You may obtain this information from your ISP The default port number is 80 The default name is video mjpg where is the number of the stream You may use a PC with a secure browser to connect to the HTTPS port of the camera The default port number is 443 The port number that you use for RTSP streaming to mobile
22. A E E E E 56 Motion Detection seseseseseseseseseesososesesescorocorerereresesesesess 58 THRIVE ano Date neen 59 A B 61 0 CN ene e n E eee 60 DE renee einernree 69 OLELE cs E E E A 70 ER anO IN 70 m i e N E EE E E E AE 71 ACCO S S ouenna E E 72 Manten ari Eseese rinena NNE rr 73 Device Management sonnetten 73 SS LOD EOE A A EE 74 Firmware Upgrade s seessssesseseessesessesseseeseesessesseseeseesesses 75 3 CS La E E A E A 76 IES ES N E E E E A E JJ E o E E NE A 78 Technical Specifications seseseeseesseseesseseesessesseseeseosessesseseoseess 79 Safety Statements e ssessesseessessessessesseeseessesscessesseoseeseesseoseeseesss 81 D Link DCS 2310L User Manual Section 1 Product Overview Product Overview Package Contents DCS 2310L HD PoE Outdoor Cube Network Camera CAT5 Ethernet cable Pre Attached Power adapter Pre Attached CD ROM with User Manual and software Quick Installation Guide If any of the above items are missing please contact your reseller Note Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product D Link DCS 2310L User Manual Section 1 Product Overview Introduction Congratulations on your purchase of the DCS 2310L HD PoE Outdoor Cube Network Camera The DCS 2310L is a versatile and unique solution for your small office or home Unlike a standard webcam the DCS 2310L is a complete system
23. Alerts and Notification Email You have completed your IP camera setup Please dick the Back button if you want to review or modify your settings or click on the Apply button to save and apply your settings Changes saved IP camera s network is restarting please wait for 6 seconds 47 Section 4 Configuration Network Setup Use this section to configure the network connections for your camera All relevant information must be entered accurately After making any changes click the Save Settings button to save your changes LAN Settings This section lets you configure settings for your local area network LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS Setup Wizard DHCP Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically omo EE EN If you choose DHCP you do not need to fill out the IP sa rene address settings O ean pend Static IP Address You may obtain a static or fixed IP address and other Frain Sis UP Tornando ac network information from your network administrator nn for your camera A static IP address may simplify access ne to your camera in the future i IP Address Enter the fixed IP address in this field mas Access name for stream1 Access name for stream2 Access name for stream3 Subnet Mask This number is used to determine if the destination is in the same subnet The default value is 255 255 2
24. B 2D IP Address 192 168 0 101 IP Subnet Mask 255 755 255 0 Default Gateway 192 168 0 1 Primary DNS 192 168 0 1 Secondary DNS 0 0 0 0 PPPoE Disable DDNS Disable status info mydlink ver 2 0 15 b6 D Link DCS 2310L User Manual Section 4 Configuration Logs This page displays the log information of your camera You may download the information by clicking Download You may also click Clear to delete the saved log information pes 2510 IJ The system log records IP camera events that have occurred URRENT LOG Device Info Logout D Link DCS 2310L User Manual 2011 02 03 00 06 52 SD CARD WAS REMOVED 2011 02 03 00 06 29 SD CARD INITIALIZES FAILED 2011 02 03 00 06 15 SD CARD WAS REMOVED 2011 02 03 00 05 53 SD CARD INITIALIZES FAILED 2011 02 03 00 00 51 admin FROM 192 168 0 100 TURN ON MASK AREA 2 2011 02 03 00 00 51 admin FROM 192 168 0 100 TURN ON MASK AREA 3 2011 02 03 00 00 51 admin FROM 192 168 0 100 TURN ON MASK AREA 1 2011 02 02 23 56 30 admin FROM 192 168 0 100 SET EVENT SERVER 1 Name Serverl Type Email 2011 02 02 23 56 30 admin FROM 192 168 0 100 SET EVENT MEDIA 1 Name Medial Type Video Clip 2011 02 02 23 56 30 admin FROM 192 168 0 100 SET MOTION BLOCK TABLE 2011 02 02 23 56 30 admin FROM 192 168 0 100 SET EVENT TYPE 1 Trigger Motion Detection 2011 02 02 23 47 59 admin FROM 192 168 0 100 SET VIDEO CODEC Need Reset 2011 02 02 23 47 59 admin FROM 192 168 0 100 SET PROFILE 1 Viewer window area
25. D Link Version 1 0 13 06 2012 User Manual HD PoE Outdoor Cube Network Camera DCS 2310L Preface D Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes Information in this document may become obsolete as our services and websites develop and change Please refer to the www mydlink com website for the most current information Manual Revisions Revision Date Description SSS May 30 2012 DCS 2310L Revision A1 with firmware version 1 00 Trademarks D Link and the D Link logo are trademarks or registered trademarks of D Link Corporation or its subsidiaries in the United States or other countries All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies Copyright 2012 D Link Corporation All rights reserved This publication may not be reproduced in whole or in part without prior expressed written permission from D Link Corporation D Link DCS 2310L User Manual 2 Table of Contents Product OVEN WICW rer csetesecrsvevtestsenresusoraesventceccrtseseonae nannies 5 Package Contents ceescccccsssssessssssesesesecsesessesesessseeseeees 5 Nae ce o T ena n O A E E E eenenrn 6 System Requirements neneseosenenensenenensn 6 TEELE Soenens seamen T TA 7 Hardware Overview nnsenenenenenenenenenenenenenvenn 8 Fe ON aanne
26. ICR Filter module Built in PIR sensor 5 meter Built in microphone and speaker Configurable image size quality frame rate and bit rate Time stamp and text overlays Configurable motion detection windows Simultaneous H 264 MPEG 4 MJPEG format compression H 264 MPEG 4 multicast streaming 16 9 1280 x 800 1280 x 720 800 x 450 640 x 360 480 x 270 320 x 176 176 x 144 G 726 G 711 10 100 BASE TX Fast Ethernet port IPv6 IPv4 TCP IP UDP ICMP DHCP client NTP client D Link DNS client DDNS client D Link SMTP client FTP client Administrator and user group protection Password authentication 10x digital zoom Focal length 3 45 mm Aperture F2 0 Angle of view H 57 8 V 37 8 D 66 Configurable privacy mask zones Configurable shutter speed brightness saturation contrast and sharpness JPEG for still images 4 3 1024 x 768 800 x 600 640 x 480 480 x 360 320 x 240 176 x 144 MicroSD SDHC card slot HTTP HTTPS Samba Client PPPOE UPnP port forwarding RTP RTSP RTCP IP filtering QoS CoS Multicast IGMP ONVIF compliant HTTP and RTSP digest encryption 79 Appendix B Technical Specifications System Management System Requirements for Web Interface Event Management Remote Management Mobile Support D ViewCam System Requirements D ViewCam Software Functions General Weight External Power Ada
27. Installation Guide D View Cam Manual Adobe Reader D Link DCS 2310L User Manual 20 Section 2 Installation Select your preferred language for the installation from the drop down menu and click on Start to proceed Locate the pre attached Ethernet and power cables on the rear of your camera Click Next to continue D Link DCS 2310L User Manual DCS 2310L Setup Wizard Welcome Welcome to the IP camera setup wizard This wizard will help you easily setup the Internet camera register mydlink web site for remote view and other interesting online services Select your language English lll Se DCS 2310L Setup Wizard Plug in the cables Select Connect Join Please confirm that the following tasks are done before clicking Next 1 Unpack your network camera and find the Ethernet cable and the power adapter connected to the back of the camera 1 On the camera side Manuals and Downloads Troubleshooting Copyright 2009 2012 D Link Corporation Inc All rights reserved 21 Section 2 Installation Connect the Ethernet cable to a router Click Next to continue Attach the external power supply to your wall outlet or power strip Click Next to continue D Link DCS 2310L User Manual my DCS 2310L Setup Wizard Select Connect Join Please confirm that the following tasks are done before clicking Next Plug in the cables
28. Link DCS 2310L User Manual The Day Night mode is set automatically Generally the camera uses Day mode and switches to Night mode when needed Day mode enables the IR Cut Filter Night mode disables the IR Cut Filter Set up the Day Night mode using a schedule The camera will enter Day mode at the starting time and return to Night mode at the ending time The camera can enable or disable the IR infrared light according to your preferences This setting provides additional controls depending on your specific application The IR light will always be off The IR light will always be on The IR light will turn on when the ICR sensor is on The IR light will turn on or off according to the schedule that you specify below UI DO e An IR Infrared Cut Removable ICR filter can be disengaged from the image path for increased sensitivity in low light environments The ICR filter will automatically enpe c depending on the ambient light allowing the camera to be effective in day night environmen 1 Select the Day Night from the a button The available options are pre Schedule ars Day mode and Night mode 2 The default value is Automatic IR Light The built in IR light illuminators will be activated automatically or manually so as to supplement the low light situation without additional equipment Save Settings Don t Save Settings Removable IR Cut filter trigger condition Automatic Day mode Night mode Sc
29. NTP Server NTP Server ntp dlin SET DATE AND TIME MANUALLY Set date and time manually Year 2011 Month 2 Day Hour 0 Minute a Second Save Settings Don t Save Settings SECURITY 59 Section 4 Configuration Event Setup In a typical application when motion is detected the DCS 2310L sends images to a FTP server or via e mail as notifications As shown in the illustration below an event can be triggered by many sources such as motion detection or external digital input devices When an event is triggered a specified action will be performed You can configure the Network Camera to send snapshots or videos to your e mail address or FTP site Event Condition gt Action ex Motion detection Periodically Digital input System reboot Media Server what to send where to send ex ex Snapshot Video Clips Email FTP To start plotting an event it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated D Link DCS 2310L User Manual 60 Section 4 Configuration The Event Setup page includes 4 different sections Event Setup Wizard Helpful Hints e Server There are four sections in Event Setup page They are event server media and recording Click D S Add to pop a window to add a new item of event server media or recording Click Delete to s delete the selected i
30. To add a preset to the sequence select it from the drop D Link DCS 2310L User Manual down box at the bottom of this window set the Dwell time to determine how long the camera view will stay at that preset then click the Add button The preset name will appear in the list followed by the dwell time to view that preset for You can rearrange your presets in the sequence by selecting a preset in the sequence then clicking the arrow buttons to move it higher or lower in the current sequence Clicking the trash can button will remove the currently selected preset from the sequence If you want to change the dwell time for a preset select it from the list enter a new dwell time then click the Update button Add Rename Support 0 9 A Z a z preset List gt PRESET SEQUENCE Input Preset Name Preset List Preset Name Dwell time t Cubide 10 Back_Door 10 T Preset List Preset List v Dwell time 10 Second s 3 30 57 Section 4 Configuration Motion Detection Enabling Video Motion will allow your camera to use the motion detection feature You may draw a finite motion area that will be used for monitoring After making any changes click the Save Settings button to save your changes Enable Video Motion Sensitivity Percentage Draw Motion Area Erase Motion Area D Link DCS 2310L User Manual Select this box to enable the motion detection feature
31. V6 protocol Enabling the option allows you to manually set up the address specify an optional IP address specify an optional router and an optional primary DNS The DCS 2310L allows you to multicast each of the available streams via group address and specify the TTL value for each stream Enter the port and TTL settings you wish to use if you do not want to use the defaults COS SETTINGS Enable CoS VLAN ID 1 Live video 0 Live audio 0 0 0 0 4095 Event Alarm Management QOS SETTINGS Enable QoS Live video Live audio Event Alarm Management E Enable IPv6 _IPv6 Information Manually setup the IP address Optional IP address Prefix length Optional default router Optional primary DNS MULTICAST Enable multicast for stream 1 Multicast group address Multicast video port Multicast RTCP video port Multicast audio port Multicast RTCP audio port Multicast TTL 1 255 Enable multicast for stream 2 Multicast group address Multicast video port Multicast RTCP video port Multicast audio port Multicast RTCP audio port Multicast TTL 1 255 Enable multicast for stream 3 Multicast group address Multicast video port Multicast RTCP video port Multicast audio port Multicast RTCP audio port Multicast TTL 1 255 50 Section 4 Configuration Dynamic DNS DDNS Dynamic Domain Name Server will hold a DNS host name and synchronize the p
32. a After making any changes click the Save Settings button to save your changes Time Zone Enable Daylight Saving Auto Daylight Saving Set Date and Time Manually Offset Synchronize with NTP Server NTP Server Set the Date and Time Manually Copy Your Computer s Time Settings D Link DCS 2310L User Manual Select your time zone from the drop down menu Select this to enable Daylight Saving Time Select this option to allow your camera to configure the Daylight Saving settings automatically Selecting this option allows you to configure the Daylight Saving date and time manually Sets the amount of time to be added or removed when Daylight Saving is enabled Enable this feature to obtain time automatically from an NTP server Network Time Protocol NTP synchronizes the DCS 2310L with an Internet time server Choose the one that is closest to your location This option allows you to set the time and date manually This will synchronize the time information from your PC DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP Setup Wizard p s You can set the current time for the IP camera Save Settings Don t Save Settings TIME CONFIGURATION BONNEN rime zone GMT 08 00 Taipei Mo ection Enable Daylight Savin venae Ee Seka Auto Daylight Saving SDC Set date and time manually Month Week Day of week Hour Minutes AUTOMATIC TIME CONFIGURATION E Synchronize with
33. a value between 0 and 64 0 is the slowest and 64 is the fastest Use these buttons to move to a specific part of the viewing area which you can then set as a preset Click the Home button to return to the center of the viewing area Enter the name of the preset you want to create then click the Add button to make a new preset If an existing preset has been selected from the Preset List you can change its name by typing in a new name then clicking the Rename button Click this drop down box to see a list of all the presets that have been created You can select one then click the GoTo button to change the displayed camera view to the preset Clicking the Remove button will delete the currently selected preset This section allows you to create a preset sequence which automatically moves the camera s view between a set of preset views elpful Hints A DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP Set zard Setup Using the Pan and Tilt controls move the camera view to the required position There are provides the tools for creating and saving Preset positions amp Preset Sequence PRESET CONTROL PRESET Input Preset Name Add Rename Support 0 9 A Z a z _ Preset List Preset List GoTo Remove PRESET SEQUENCE m a T AJ Preset List Preset List v Dwell time 10 Second s 3 30 SECURITY 56 Section 4 Configuration Preset List
34. al setup to enable the Motion Detection setup Motion Detection Setup Wizard Manual Motion Detection Setup man 5j SECURITY D Link DCS 2310L User Manual 42 Section 4 Configuration Internet Connection Setup Wizard This wizard will guide you through a step by step process to configure your new D Link Camera and connect the camera to the internet Click Next to continue tthe ret o setup your camera moton elecon setings eee ck Badk bution do 1s wizard and re open e Step 1 Setup LAN Settings e Step 2 Setup DDNS Settings e Step 3 IP camera Name Settings e Step 4 Setup Time Zone Back Next cancel Note Select DHCP if you are unsure of which settings to choose Please select whether your IP camera will connect to the Internet with a DHCP connection or Static IP address If your IP camera is connected to a router or you are unsure which settings to pick D Link recommends that you keep the default selection of DHCP connection Otherwise dick on Static IP address to manually assign and IP address before clicking on the Click Next to continue Next bution Peace contact your ISP you do not inaw your UscraneandPasecrd o r DHCP Static IP Client IP address Subnet mask Default router 192 163 0 1 Primary DNS Secondary DNS 9 0 0 0 Enable PPPoE User Name e g 654321 hinet net Password Back ext cancel D Link DCS 2310L User Manual 43 Section 4 Configuration Select Static IP i
35. amera You may also select your language using the drop down menu on the left side of the screen You can zoom in and out on the live video image using your mouse Right click to zoom out or left click to zoom in on the image SD Status This option displays the status of the SD card If no SD card has been inserted this screen will display the message Card Invalid Motion Trigger This indicator will change color when a trigger event occurs Indicator Note The video motion feature for your camera must be enabled mn ia Indicator color This control pad can be used to electronically pan tilt and Control Pad zoom ePTZ within the camera s predefined view area if one has been defined OAN Bae Ad cud _ Auto Pan Starts the automatic panning function The ROI will pan from back and forth within the FOV ox RP Stops the camera ePTZ motion Starts the camera s motion along the predefined path ePTZ Speed You may select a value between 0 and 64 0 is the slowest and 64 is the fastest D Link DCS 2310L User Manual 40 Section 4 Configuration Global View This window indicates the total field of view FOV of the camera The red box indicates the visible region of interest ROI Language You may select the interface language using this menu This section shows your camera s live video You can control your settings using the buttons below Cf Video Profile 1 ms Record a Video Clip en Video
36. ard can store about 0 days of video maximum When the MicroSD card is full Continue recording amp overwrite the oldest video Stop recording amp notify me 35 Section 3 mydlink Record Video Clips by This option enables either continuous Schedule recording Email Notification Toggles notification by email on or off Video Clips Recording In the event that the microSD card can not store further recordings Mode the user can choose to record over previous recordings or to be notified and cease recording D Link DCS 2310L User Manual or recurring scheduled Recording Settings zemen Do not record any video clips Record video clips when motion is detected Record video clips by schedule 1 Schedule setup Record video Continuously Only on Vv Sun 2 E mail notification F Enable e mail notification 3 Video clips recording mode The inserted MicroSD card can store about 0 days of video maximum When the MicroSD card is full Continue recording amp overwrite the oldest video Stop recording amp notify me Save Cancel 36 Section 3 mydlink Advanced Settings Show password Checking this box will show the password Advanced Setting Clicking on the Advanced Setting button will open a secondary window allowing full configuration of the DCS 2310L D Link DCS 2310L User Manual Advanced Settings You can click the Advanced Settings button to access
37. ck your camera s cable connections and make sure they are secure e Check to make sure that the LED on your camera is lit solid green If you still cannot access your camera reset your camera and run the Camera Installation Wizard again from the CD ROM included in your package D Link DCS 2310L User Manual 31 Section 3 mydlink Live Video In the main part of the screen the Live Video tab will be selected by default If the camera is available a Live Video feed will be displayed Video will be shown at VGA resolution 640x480 if viewing your camera from a PC on the same local network or at QVGA resolution 320x240 if viewing your camera from a PC on a remote network FAQ Suppor tora nk TE My Devices My Profile id DCS 2310L Live View Playback Settings Te 14441711 IPPON 02 Ee Dee TN Ec 2 D Link DCS 2310L User Manual 32 Section 3 mydlink Playback The Playback tab allows you to review pre recorded footage captured to the tepals microSD card re DCS 2310L Live View Playback Settings o m Select the recording clip Record on 2012 05 09 from 0 to 23 Je 947 matching video clip s were found Select the date of the footage you wish to preview from the drop down menu fAydlink then choose from the recordings available for that date DCS 2310L Live View Playback Settings o Mam Select the recording clip Record on 2012 05 09 from 0 to 23 x
38. e Step 1 Follow the steps outlined in fRemoving the Top Panel on page 11 Step 2 Unplug the power cable from the DC power connector Step 3 Insert the rubber weatherproof plug ensuring it aligns with the space left by the power cable Step 4 Follow the steps outlined in Reattaching the Top Panel on page 14 Note To avoid damage to the weatherproof aspects of the camera users are advised to ensure the weatherproof plug is seated correctly D Link DCS 2310L User Manual 12 Section 1 Product Overview Replacing the Ethernet Cable Step 1 Follow the steps outlined in fRemoving the Top Panel on page 11 Step 2 Unplug the Ethernet cable from the RJ45 connector Step 3 Carefully remove the weatherproof cable connection cover Step 4 Attach the weatherproof cable connection cover to the new Ethernet cable Step 5 Plug the new Ethernet cable into the RJ45 connector Step 6 Follow the steps outlined in Reattaching the Top Panel on page 14 Note To avoid damage to the weatherproof aspects of the camera users are advised not to remove the rear cable connection covering To use a longer Ethernet cable install a coupling adaptor D Link DCS 2310L User Manual 13 Section 1 Product Overview Reattaching the Top Panel Step 1 Seat the protective panel ensuring a tight fit with the inlaid rubber seal Step 2 Replace the two screws Ensure that the screws are tightened firmly Step 3 Fir
39. e View window area Maximum frame rate Video quality Constant bit rate Fixed quality _ Save Settings Don t Save Settings Warning Change the aspect ratio will clear 4 3 v the settings of privacy mask and preset and motion detection ___ Save 1024x768 v 1024x768 v 25 v 1M VIDEO PROFILE 3 Mode Frame sze View window area Maximum frame rate Video quality Constant bit rate Fxed quality AUDIO SETTINGS Audio in off Audio in gain level Audio out off Audio out volume level H 264 320x240 320x240 Save Settings Don t Save Settings SECURITY D Link DCS 2310L User Manual 55 Section 4 Configuration Preset This screen allows you to set preset points for the ePTZ function of the camera which allows you to look around the camera s viewable area by using a zoomed view Presets allow you to quickly go to and view a specific part of the area your camera is covering and you can create preset sequences which will automatically change the camera s view between the different presets according to a defined order and timing you can set Note If your View window area is the same as your Frame size you will not be able to use the ePTZ function Video Profile ePTZ Speed Arrow Buttons and Home Button Input Preset Name Preset List Preset Sequence D Link DCS 2310L User Manual This selects which video profile to use You may select
40. e To Local Hard Drive You may save your current camera configuration as a file on your computer pcs 23101 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS Local From Local Hard Drive Locate a pre saved configuration by clicking Browse and a gn afer the factory then restore the pre defined settings to your camera by mn CA Save To Local Hard Drive Save Configuration clicking Load Configuration Load From Local Hard Drive Restore to Factory Default You may reset your camera and restore the factory Restore To Factory Defaus geerde settings by clicking Restore Factory Defaults Reboot Devi Rebs Reboot Device This will restart your camera D Link DCS 2310L User Manual 74 Section 4 Configuration Firmware Upgrade The camera s current firmware version will be displayed on this screen You may visit the D Link Support Website to check for the latest available firmware version To upgrade the firmware on your DCS 2310L please download and save the latest firmware version from the D Link Support Page to your local hard drive Locate the file on your local hard drive by clicking the Browse button Select the file and click the Upload button to start upgrading the firmware Current Firmware Version Current Product Name File Path Upload D Link DCS 2310L User Manual Displays the detected firmware version Displays the camera model name Locate the file upgraded firmware on your
41. e that the screws are tightened firmly Step 8 Firmly replace the protective rubber grommets Note To ensure that the camera stays weatherproof users are advised to ensure that all the rubber seals are secured firmly in place D Link DCS 2310L User Manual 29 Section 3 mydlink mydlink After registering your DCS 2310L camera with a mydlink account in the Camera Installation Wizard You will be able to remotely access your camera from the www mydlink com website After signing in to your mydlink account you will see a screen similar to the following FAQ Suppor faydii nk TE My Devices My Profile DCS 2510L Live View Playback Settings Te 14441711 IEEE NERD eee rays ae ie i SY D Link DCS 2310L User Manual 30 Section 3 mydlink Camera Status Here you can see the online status of each of your cameras Your online status may be one of the following A green checkmark indicates that your camera is online and ready to use A yellow exclamation point indicates that your camera is online but the camera password has changed You will need to enter your new camera password to access your camera 0 again A red X indicates that your camera is offline and currently cannot be accessed remotely If your camera is offline try the following e Check to make sure that the Internet connection to your camera is working properly e Try restarting your Internet router e Che
42. ed to go through the Camera Setup Wizard Connect the Ethernet Cable Using the pre attached Ethernet cable connect the free end to your network Note To avoid damage to the weatherproof aspects of the camera users are advised not to remove the rear cable connection covering To use a longer ethernet cable or power cord install a coupling adaptor or power extension strip E E Attach the External Power Supply Attach the external power supply to your wall outlet or power strip Please skip this step if your camera is connected using PoE Power over Ethernet Note If you choose to take advantage of the Power over Ethernet feature you may unplug the power cable However to avoid water ingress ensure the provided rubber weatherproof plug is used to fill the gap See Removing the Power Cable on page 12 for further instructions D Link DCS 2310L User Manual 28 Section 2 Installation SD Memory Card Installation The SD memory card slot is housed behind the lower protective panel on the rear of the device See Rear Internal on page 10 Step 1 Place the camera face down on a non slip flat surface Step 2 Carefully pry out the two lower protective rubber grommets using a thin flat blade Step 3 Undo the two screws using a Philips 00 Screwdriver Step 4 Lift off the protective panel Step 5 Insert a MicroSD Memory Card Step 6 Replace the protective panel Step 7 Replace the two screws Ensur
43. emote site via Intranet or Internet Other features include image monitoring recording images to a hard drive viewing up to 32 cameras on one screen and taking snapshots IR LED for Day and Night Functionality The built in infrared LEDs enables night time viewing of up to 16 feet 5 meters IP65 Weatherproof Housing The DCS 2310L uses an IP65 weatherproof housing allowing you to rest assured that in the toughest of conditions it will continue to provide round the clock surveillance PoE Power over Ethernet for Flexible Installation The DCS 2310L can draw all the power it needs from a powered Ethernet port meaning installation is simple and clutter free D Link DCS 2310L User Manual 7 Section 1 Product Overview Hardware Overview Front 1 Camera Lens Records video of the surrounding area The IR Cut Removable sensor measures the lighting conditions and switches 2 ICR Sensor l between color and infrared accordingly 3 IR LED Infrared LED illuminates the camera s field of view at night 4 Microphone Records audio from the surrounding area 5 PIR Passive Infrared sensor for motion detection 6 Power Status LED Indicates the camera s current status D Link DCS 2310L User Manual Section 1 Product Overview Rear External mm 0e B So n m o Weatherproof Cover Weatherproof cover for the MicroSD Card slot and reset button
44. f your Internet Service Provider has provided you with connection settings or if you wish to set a static address within your home network Enter the correct configuration Smeaiscmected tos outer or you are unsure wich stings to pct lk recommends that you Keep the default i 5 selection of DHCP connection Otherwise dick on Static IP address to manually assign and IP address before dicking on the information and click Next to continue er ret mt nd rd DHCP Static IP Client If you are using PPPoE select Enable PPPoE and enter your user name and password IP address otherwise click Next to continue Subnet mask Default router 192 168 0 1 Primary DNS Secondary DNS 0 0 0 0 Enable PPPoE User Name e g 654321 hinet net Password If you have a Dynamic DNS account and would like the camera to update your IP address automatically Select Enable DDNS and enter your host information Click Next to continue Bate bone st aE you nest onsen below en cick onthe Net button to continue a Enable DDNS Server Address www dlinkddns co Host Name User Name Password Verify Password Timeout Enter a name for your camera and click Next to continue connect to your IP camera va ti nae Please aen a name of your ince before chang on the Next utton IP camera Name DCS 2310L D Link DCS 2310L User Manual 44 Section 4 Configuration Configure the correct time to ensure that all events will be triggered as sc
45. g when motion JN when motion is is detected mydlink praan d et e ct e d My Devices Shared Devices My Profile DCS 2132L Live View Playback Settings Events o 44441439 E E Show Alertsony Te Mark Page as Read Clicking this button will mark the current page of event notifications as read m Mark all as Read Clicking this button will mark all event notifications as read D Link DCS 2310L User Manual 38 Section 4 Configuration Configuration Using the Configuration Interface After completing the Camera Installation Wizard you are ready to use your camera The camera s built in Web configuration utility is designed to allow you to easily access and configure your DCS 2310L At the end of the wizard click Go To Camera or enter the IP address of your camera into a web browser such as Mozilla Firefox To log in use the User name admin and the password you created in the Installation Wizard If you did not create a password the default password is blank After entering your password click OK The server 192 168 0 102 at DCS 2310L requires a username and password Warning This server ts requesting that your username and password be sent in an insecure manner basic authentication without a secure connection D Link DCS 2310L User Manual 39 Section 4 Configuration Live Video This section shows your camera s live video You may select any of the available icons listed below to operate the c
46. h the inlaid rubber seal Step 2 Replace the two screws Ensure that the screws are tightened firmly Step 3 Firmly replace the protective rubber screw coverings Note To ensure that the camera stays weatherproof users are advised to ensure that all the rubber seals are secured firmly in place D Link DCS 2310L User Manual 16 Section 2 Installation Installation Zero Configuration Setup If you have a mydlink enabled Cloud Router you can take advantage of Zero Configuration Zero Configuration automatically configures your camera s settings for you and adds it to your mydlink account automatically This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router Connect your camera to your mydlink enabled Cloud Router and Zero Configuration will automatically configure your DCS 2310L and automatically add the camera to your mydlink account After the short time it takes to do this you can remotely access your camera from the www mydlink com website to manage and monitor your DCS 2310L Connect the Ethernet Cable Using the pre attached Ethernet cable connect the free end to your network Note To avoid damage to the weatherproof aspects of the camera users are advised not to remove the rear cable connection covering To use a longer ethernet cable or power cord install a coupling adaptor or power extension strip Attach the External Power Supply Attach the external powe
47. hedule mode Day mode 24hr From 07 00 To 18 00 IR LIGHT IR Light Control off On Sync With ICR Schedule IR Light Control On 24hr From 07 00 To 18 00 Save Settings Don t Save Settings SECURITY 70 Section 4 Configuration HTTPS This page allows you to install and activate an HTTPS certificate for secure access to your camera After making any changes click the Save Settings button to save your changes Enable HTTPS Secure Connection Enable the HTTPS service DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS DI and DO DO e ints Create Certificate Method Choose the way the certificate should be created Three EE To enable HTTPS you have to create and hatal arne fst Save Settings Don t Save Settings options are available Enable HTTPS secure connection Create a self signed certificate automatically gren aa Create a self signed certificate manually mpg Create a certificate request and install adc EN kn Status Displays the status of the certificate En En Looy oe Note The certificate cannot be removed while the HTTPS is coment MOD still enabled To remove the certificate you must first Cres Ciara Reve uncheck Enable HTTPS secure connection EN Ga D Link DCS 2310L User Manual 71 Section 4 Configuration Access List Here you can set access permissions for users to view your DCS 2310L Allow list Start IP address End IP add
48. heduled Click Next to continue If you have selected DHCP you will see a summary of your settings including the camera s IP address Please write down all of this information as you will need it in order to access your camera Click Apply to save your settings D Link DCS 2310L User Manual Please configure the correct time to ensure that all events are triggered captured and scheduled at the correct time and day and then dick on the Next button Time Zone GMT 08 00 Taipei X Enable Daylight Saving C Below is a summary of your IP camera settings Click on the Back button to review or modify settings or dick on the Apply button if all settings are correct Itis recommended to note down these settings in order to access your IP camera on the network or via your web browser IP Address DHCP IP camera Name DCS 2310L Time Zone GMT 08 00 Taipei DDNS Disable PPPoE Disable 45 Section 4 Configuration Motion Detection Setup Wizard This wizard will guide you through a step by step process to configure your camera s motion detection functions Click Next to continue Step 1 This step will allow you to enable or disable motion detection specify the detection sensitivity and adjust the camera s ability to detect movement You may specify whether the camera should capture a snapshot or a video clip when motion is detected Please see the Motion Detection section on Motion Detection on page 58for informa
49. his is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operatio
50. il address Recipient email address Server address User name Password Port 25 This server requires a secure connection Start TLS Server address Port User name Password Remote folder name E Passive mode Network storage Network storage location for example my_nas disk folder Workgroup User name Password Primary WINS server SD Card Test _ Save Settings Don t Save Settings 62 Section 4 Configuration Add Media There are three types of media Snapshot Video Clip and System Log After making any changes click the Save Settings button to save your changes DCS 2310L II LIVE VIDEO SETUP ADVANCED MAINTENANCE Setup Wizard Setup Ee SEM You can set at most 5 different media here for different event Media Name Enter a unique name for media type you want to create Save Settings Don t Save Settings MEDIA TYPE Snapshot Select this option to set the media type to snapshots Snapshot Source Profile 1 v Send 1 pre event image s 0 4 Source Set the video profile to use as the media source Refer RO to Audio and Video on Audio and Video on page 54ifor ae oe more information on video profiles gt vie Cp Source Profile1 v Pre event recording Second s 0 4 Maximum duration Second s 1 100 Send pre event image s 0 4 Set the number of pre event images to take Pre event Maxmur fie see Kbytes 100 5000 File Name Pref
51. ion If you already have a mydlink account enter your login details and click Next to proceed Confirm your mydlink account details and give the camera a unique Dn name and click Done D Link DCS 2310L User Manual F myc ink Setup gt Wiz my DCS 2310L Setup Wizard Join mydlink service Plug Select Connect Do you have a mydlink account Yes already have a mydlink account No I need to sign up for a new account E Mail First Name Password Last Namel Confirm Password would like to receive emails for latest services and products from mydlink I accept mydlink terms and conditions don t want to sign up right now Troubleshooting Manuals and Downloads Copyright 2009 2012 D Link Corporation Inc All rights reserved DCS 2310L Setup Wizard Join mydlink service Plug Select Connect Now you can use the information below to login mydlink website click Done to visit mydlink website to see camera live view Account paul niland me Password XXXXXX You can also learn more about mobile applications for your iPhone amp Android phone on mydlink website Camera name DCS 2310L More details about your camera W Add a shortcut for mydlink to my desktop and create a browser bookmark Manuals and Downloads Troubleshooting Copyright 2009 2012 D Link Corporation Inc All rights reserved 26
52. ix images are images taken before the main event snapshot systemba Is taken Save Settings Don t Save Settings Send post event image s 0 7 Set the number of post event images to take Post event images are images taken after the main event snapshot is taken You can set up to 7 post event images to be taken File name prefix The prefix name will be added on the file name Add date and time suffix to file Check it to add timing information as file name suffix name D Link DCS 2310L User Manual 63 Section 4 Configuration Video clip Source Pre event recording Maximum duration Maximum file size File name prefix System log D Link DCS 2310L User Manual Select this option to set the media type to video clips Set the video profile to use as the media source Refer to Audio and Video on page 46 for more information on video profiles This sets how many seconds to record before the main event video clip starts You can record up to 4 seconds of pre event video Set the maximum length of video to record for your video clips Set the maximum file size to record for your video clips This is the prefix that will be added to the filename of saved video clips Select this option to set the media type to system logs This will save the event to the camera system log but will not record any snapshots or video LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP elpful Hints
53. ize If the Frame size is larger than the Live Video size you can use the ePTZ controls to look around 16 9 1280 x 800 1280 x 720 800 x 450 640 x 360 480 x 270 320 x 176 176 x 144 4 3 1024 x 768 800 x 600 640 x 480 480 x 360 320 x 240 176 x 144 Note If your View window area is the same as your Frame size you will not be able to use the ePTZ function A higher frame rate provides smoother motion for videos and requires more bandwidth Lower frame rates will result in stuttering motion and requires less bandwidth section allows you to pcs 23101 2310L LIVE VIDEO setup ADVANCED MAINTENANCE STATUS configure the sound and video of your camera You can c This onfigure a settings depending on whether you are viewing content from a PC or a Mobile Phone Save Settings Don t Save Settings Warning Change the aspect ratio will dear 4 3 v the settings of privacy mask and preset and motion detection VIDEO PROFILE 1 Mode Frame size View window area Maximum frame rate Video quality Constant bit rate Fixed quality VIDEO PROFILE 2 Mode Frame size View window area Maximum frame rate Video quality Constant bit rate Fixed quality VIDEO PROFILE 3 Mode Frame size View window area Maximum frame rate Video quality Constant bit rate Fixed quality AUDIO SETTINGS T Audio in off Audio in gain level Audio out off Audio out volume level 1024x768 v 1024x768 v
54. mly replace the protective rubber screw coverings Note To ensure that the camera stays weatherproof users are advised to ensure that all the rubber seals are secured firmly in place D Link DCS 2310L User Manual Section 1 Product Overview Removing the Bottom Panel Step 1 Place the camera face down on a non slip flat surface Step 2 Carefully pry out the two protective rubber screw coverings using a thin flat blade Step 3 Undo the two screws using a Philips 00 Screwdriver Step 4 Lift off the protective panel If you need to install an SD Memory Card please skip to Installing an SD Memory Card on ge 16 If you need to use the Reset Button follow these steps Using the Reset Button Step 1 Follow the steps outlined in fRemoving the Bottom Panel on page 15 Step 2 Using a paperclip or similar tool press and hold the Reset Button for 10 seconds This will reset the device to it s factory settings Step 3 Follow the steps outlined in Reattaching the Bottom Panel on page 16 D Link DCS 2310L User Manual 15 Section 1 Product Overview Installing an SD Memory Card Step 1 Follow the steps outlined in fRemoving the Bottom Panel on page 15 Step 2 Insert a MicroSD Memory card into the slot with the notch facing right Step 3 Follow the steps outlined in fReattaching the Bottom Panel on page 16 Reattaching the Bottom Panel Step 1 Seat the protective panel ensuring a tight fit wit
55. n 0cs 2310L F0 7D 68 09 A3 CF 172 18 195 50 8 DHCP i Registered with mydlink Not registered V Wired Enter a password to secure your camera Admin account admin Cannot find your camera from the list Password a bekeken Confirm password D Link DCS 2310L User Manual 24 Section 2 Installation Click Next to continue ajan nS DCS 2310L Setup Wizard Connect to the network How would you connect your camera to the router Current connection Wired connection Wired connection By Ethernet cable 2 On the router side Troubleshooting Manuals and Downloads Complete the mydlink account registration with your details and make sure to Bos check the accept mydlink terms and conditions box Click Next to continue D Link DCS 2310L User Manual my Join mydlink service Do you have a mydlink account Yes already have a mydlink account Please enter your mydlink account E Mail Password O O O Ooo o o J Forgot password No need to sign up for a new account don t want to sign up right now Troubleshooting Manuals and Downloads About Exit Plug Select Join D 2 Connect the Ethernet cable to an available LAN port on your router DCS 2310L Setup Wizard Plug Select Connect Copyright 2009 2012 D Link Corporation Inc All rights reserved 25 Section 2 Installat
56. n is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation D Link DCS 2310L User Manual 82
57. ng Exposure Mode Auto v MaxGan 24 v dB will allow you to control the maximum amount of gain pn p Brightness 4 v to apply to brighten the picture maan 57 Saturation 128 v Denoise This setting controls the amount of noise reduction that Sharpness ar will be applied to the picture Brightness Adjust this setting to compensate for backlit subjects Contrast Adjust this setting to alter the color intensity strength Saturation This setting controls the amount of coloration from grayscale to fully saturated Sharpness Specify a value from 0 to 8 to specify how much sharpening to apply to the image Reset Default Click this button to reset the image to factory default settings D Link DCS 2310L User Manual 53 Section 4 Configuration Audio and Video You may configure up to 3 video profiles with different settings for your camera Hence you may set up different profiles for your computer and mobile display In addition you may also configure the two way audio settings for your camera After making any changes click the Save Settings button to save your changes Aspect ratio Mode Frame size View window area Maximum frame rate D Link DCS 2310L User Manual Set the aspect ratio of the video to 4 3 standard or 16 9 widescreen Set the video codec to be used to JPEG MPEG 4 or H 264 Frame size determines the total capture resolution and View window area determines the Live Video viewing window s
58. of each file for recording 10 seconds File Name Prefix Save Settings Don t Save Settings SECURITY D Link DCS 2310L User Manual 68 Section 4 Configuration SD Card Here you may browse and manage the recorded files which are stored on the SD card Format SD Card Click this icon to automatically format the SD card and create picture amp video folders View Recorded Picture If the picture files are stored on the SD card click on the picture folder and choose the picture file you would like to view Playback Recorded Video If video files are stored on the SD card click on the video folder and choose the video file you would like to view Refresh Reloads the file and folder information from the SD card D Link DCS 2310L User Manual DCS 2310L II LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS HELP Setup Wizard N Setup SD Card SD Status Ready Files per Page 10 v Refresh 1 v of1 Delete So Oe am Fes Ee 5 M a Total 1976528KB Used 1976528KB Free 0KB x SECURITY 69 Section 4 Configuration Advanced ICR and IR Here you can configure the ICR and IR settings An IR Infrared Cut Removable ICR filter can be disengaged for increased sensitivity in low light environments Automatic Day Mode Night Mode Schedule Mode IR Light Control Off On Sync Schedule D
59. of your camera Specifies the measurable difference between two sequential images that would indicate motion Please enter a value between 0 and 100 Specifies the amount of motion in the window being monitored that is required to initiate an alert If this is set to 100 motion is detected within the whole window will trigger a snapshot Draw the motion detection area by dragging your mouse in the window indicated by the red square To erase a motion detection area simply click on the red square that you wish to remove Right clicking on the camera image brings up the following menu options Select All Draws a motion detection area over the entire screen Clear All Clears any motion detection areas that have been drawn Restore Restores the previously specified motion detection areas In order to use motion prin you must first check the checkboxes then draw the areas you want to monitor for moi Save Settings Don t Save Settings Enable Video Motion RANAAANN NANA KARA ANA pee Sensitivity AAA 0 100 Percentage 0 100 Save Settings Don t Save Settings SECURITY LIVE VIDEO E Enable Video Motion NN AAAS SAN SAAS ANAS manai DAARNA AAS 0 100 Percentage 0 100 Don t Save Settings 58 Section 4 Configuration Time and Date This section allows you to automatically or manually configure update and maintain the internal system clock for your camer
60. ptor Power Consumption Temperature Humidity Certifications D Link DCS 2310L User Manual Operating System Microsoft Windows 7 Vista XP 2000 Motion detection Event notification and uploading of snapshots video clips via e mail or FTP Take snapshots video clips and save to local hard drive or NAS via web browser Windows 7 Vista XP system Pocket PC or mobile phone Operating System Microsoft Windows 7 Vista XP Web Browser Internet Explorer 7 or higher Remote management control of up to 32 cameras Viewing of up to 32 cameras on one screen 235g Input 100 to 240 V AC 50 60 Hz 3 7 Watts Operating 25 to 50 C 13 to 122 F Operating 20 to 80 non condensing CE CE LVD Browser Internet Explorer Firefox Chrome Safari Supports multiple SMTP and FTP servers Multiple event notifications Multiple recording methods for easy backup Configuration interface accessible via web browser mydlink mobile app for iOS and Android mobile devices Protocol Standard TCP IP Supports all management functions provided in web interface Scheduled motion triggered or manual recording options Output 5V DC 1 2 A Storage 20 to 70 C 4 to 158 F Storage 5 to 95 non condensing FCC C Tick IP65 80 Appendix B Technical Specifications Dimensions D Link DCS 2310L User Manual 81 Appendix C Safety Statements Safety Statements CE Mark Warning T
61. r supply to your wall outlet or power strip Please skip this step if your camera is connected using PoE Power over Ethernet Note If you choose to take advantage of the Power over Ethernet feature you may unplug the power cable However to avoid water ingress ensure the provided rubber weatherproof plug is used to fill the gap See Removing the Power Cable on page 12 for further instructions D Link DCS 2310L User Manual 17 Section 2 Installation Check Your mydlink Account faydiink ee Open a web browser and login to your mydlink account The mydlink page will check for new devices and display a New device Found pop up notification in omit terse Sti My Profile 20019862 the bottom left corner Click the notification to continue ep ome ves Network Name SSID Taonet mi zn LANIP 192 168 0 1 0000 3ke ts en 0008 4ke Connection List Device Device Name IP Address MAC Address Block O CardboardBox 192 168 0 110 00 26 2D 02 FE FA Q x 192 168 0 120 04 54 53 50 53 18 QJ HeiGuy 192 168 0 100 00 1A 92 E2 4D C9 Za O 192 168 0 121 28 0 2C DC 0A BE g a 192 168 0 101 F0 A2 25 AA 8C C3 T Suspect List Device Device Name Time MAC Address Block DCS 2132L A summary and confirmation notification will appear with the automatically Confirming New Device configured details Make a note of the details and click OK to add the camera to yo ur account anes to add this new device to your mydlink
62. ress Delete allow list Deny list Delete deny list D Link DCS 2310L User Manual The list of IP addresses that have the access right to the camera The starting IP Address of the devices such as a computer that have permission to access the video of the camera Click Add to save the changes made Note A total of seven lists can be configured for both columns The ending IP Address of the devices such as a computer that have permission to access the video of the camera Remove the customized setting from the Allow List The list of IP addresses that have no access rights to the camera Remove the customized setting from the Delete List For example When the range of the Allowed List is set from 1 1 1 0 to 192 255 255 255 and the range of the Denied List is set from 1 1 1 0 to 170 255 255 255 Only users with IPs located between 171 0 0 0 and 192 255 255 255 can access the Network Camera DCS 2310L LIVE VIDEO SETUP ADVANCED MAINTENANCE STATUS DI and DO Start IP address End IP address Delete allow list Start IP address End IP address Delete deny list 72 Section 4 Configuration Maintenance Device Management You may modify the name and administrator s password of your camera as well as add and manage the user accounts for accessing the camera You may also use this section to create a unique name and configure the OSD settings for your camera Admin Password Setting Set a new pa
63. ssword for the administrator s account Add User Account Add new user account Here you can change the administrators password for your IP camera as well as add and or delete user account s You can configure the information such as IP camera s name and time via this page You can also enable the OSD On Screen Display feature in order to display the IP User Name The user name for the new account PE areca rare and tie star for your vdeo recordings New Password 63 characters maximum Password The password for the new account retype Paso User List All the existing user accounts will be displayed here You nnn hennen may delete accounts included in the list but you may wine lt want to reserve at least one as a guest account Camera Name Create a unique name for your camera that will be added to the file name prefix when creating a snapshot or a video clip IP camera Name DCS 2310L 63 characters maximum Enable OSD Label DCS 2310L 63 characters maximum Show time F Enable OSD Select this option to enable the On Screen Display feature for your camera Label Enter a label for the camera which will be shown on the OSD when it is enabled Show Time Select this option to enable the time stamp display on the video screen D Link DCS 2310L User Manual 73 Section 4 Configuration System In this section you may backup restore and reset the camera configuration or reboot the camera Sav
64. tem from event server media or recording Click on the item name to pop a Media I window to edit it There can be at most 2 events and 1 recording There can be at most 5 DEN server and 5 media configurations Recording Name Type Address Location Serverl Email mail dlink com a sene Det 1 To add a new item event server or media click Add A screen will appear and allow you to update the fields accordingly 2 To delete the selected item from the pull down menu of event server or media click Delete Name Status Sun Mon Tue Wed Thu Fri Sat Time Trigger Eventi ON Vv Vv Vv Vv V v V 00 00 23 59 Motion Eventi v 3 Click on the item name to pop up a window for modifying RECORDING Name Status Sun Mon Tue Wed Thu Fri Sat Time Source Destination Add Delete SECURITY D Link DCS 2310L User Manual 61 Section 4 Configuration Add Server You can configure up to 5 servers to save snapshots and or video to After making any changes click the Save Settings button to save your changes Server Name Enter the unique name of your server E mail Enter the configuration for the target e mail server account FTP Enter the configuration for the target FTP server account Network Storage Specify a network storage device Only one network storage device is supported SD Card Use the camera s onboard SD card storage D Link DCS 2310L User Manual Server Name Email Sender ema
65. the input type that triggers the event peel From 00 00 To 23 59 v Video Motion Detection Motion is detected during live video monitoring Select E a Serveri the windows that need to be monitored EN nk Save Settings Don t Save Settings Periodic The event is triggered in specified intervals The trigger interval unit is in minutes System Boot Triggers an event when the system boots up Network Lost Triggers an event when the network connection is lost Passive Infrared Sensor Triggers an event when the PIR sensor is activated by moving infrared objects even in dark environment D Link DCS 2310L User Manual 65 Section 4 Configuration Time Select Always or enter the time interval Server Specify the location where the event information should be saved to You can setup schedule recording to network storage with your specify week day and time period Save Settings Don t Save Settings RECORDING Priority normal v Source Profile 1 v e ti g for the video Total cycling recording siz RECORDING SETTINGS Destination None v Total cyding recording size 1000 Mbytes 200 2000000 Size of each file for recording 10 v Mbytes Time of each file for recording 10 seconds File Name Prefix Save Settings Don t Save Settings SECURITY D Link DCS 2310L User Manual 66 Section 4 Configuration
66. tion about how to configure motion detection Step 2 This step allows you to enable motion detection based on a customized schedule Specify the day and hours You may also choose to always record motion D Link DCS 2310L User Manual This wizard will guide you through a step by step process to configure your IP camera s motion detection functions To setup the IP camera LAN or Internet settings please dick on the Back button to dose this wizard and re open the IP camera Setup wizard Otherwise click on the Next button to begin e Step 1 Specify Motion Detection Area Settings e Step 2 Motion Detection Schedule e Step 3 Alerts and Notifications Back Next cancel This section will allow you to enable or disable motion detection as well as control the sensitivity of your camera s ability to detect movement V Enable Video Motion snapshot Video Clip aay ise DIE AAS aos SIS ARRARAS AARTEN AA Sensitivity SASS 85 0 100 amp Kk sys Percentage Back Next Cancel This final step allows you to specify how you receive notification of camera events Choose between an email notification or alternatively you can setup an FTP Notification You will need your email account settings or FTP details If you are unsure of this information please contact your ISP Once you have entered this information please dick on the Next button W Sun V Mon V Tue Wed W Thu V Fri W Sat Always
67. u to specify up to 3 rectangular areas on the camera s image to be blocked _ excluded from recordings and snapshots You may click and drag the mouse cursor over the camera image to draw a mask area Right clicking on the camera image brings up the following menu options Disable All Disables all mask areas Enable All Enables all mask areas Reset All Clears all mask areas Anti Flicker On Off Anti Flicker If the video flickers try enabling this setting tl are Mirror This will mirror the image horizontally a a Brightness 47 Flip This will flip the image vertically When turning Flip on a you may want to consider turning Mirror on as well oe Reset Default Power Line Select the frequency used by your power lines to avoid interference or distortion White Balance Use the drop down box to change white balance settings to help balance colors for different environments You can choose from Auto Outdoor Indoor Fluorescent and Push Hold D Link DCS 2310L User Manual 52 Section 4 Configuration Exposure Mode Changes the exposure mode Use the drop down box to set the camera for Indoor Outdoor or Night Anti Ficker On off environments or to Moving to capture moving objects mn The Low Noise option will focus on creating a high an To e Power Line O 60Hz 50Hz quality picture without noise You can also create 3 anaa fa different custom exposure modes The Max Gain setti
68. ublic IP address of the modem when it has been modified A user name and password are required when using the DDNS service After making any changes click the Save Settings button to save your changes Enable DDNS Select this checkbox to enable the DDNS function Server Address Select your Dynamic DNS provider from the pull down zee NEEN EEE menu or enter the server address manually EEEN nons ere alos you to us a doman name that you have purchase Doon eed en Die SUA dje ana eene da LE savce yolin en nter your domain name to connect to your IP camera no matter what your IP Host Name Enter the host name of the DDNS server Sign up for D Link s Free DDNS service at www DLinkDDNS com Mot z Save Settings Don t Save Settings User Name Enter the user name or e mail used to connect to your Kee DDNS account Host Name User Name Password Verify Password Password Enter the password used to connect to your DDNS raast ours server account Save Settings Don t Save Settings SECURITY Timeout Enter the DNS timeout values you wish to use Status Indicates the connection status which is automatically determined by the system D Link DCS 2310L User Manual 51 Section 4 Configuration Image Setup In this section you may configure the video image settings for your camera A preview of the image will be shown in Live Video Enable Privacy Mask The Privacy Mask setting allows yo

D-Link DCS-2310L

Contents

Download Pdf Manuals

Related Search

Related Contents