EK Water Blocks EK-MOSFET ASUS X58 KIT
Contents
1. Installation and mounting manual for EK MOSFET ASUS X58 KIT This product is intended for installation only by expert users Please consult with a qualified technician for installation Improper installation may result in damage to your equipment EK Water Blocks assumes no liability whatsoever expressed or implied for the use of these products nor their installation The following instructions are subject to change without notice Please visit our web site at www ekwaterblocks com for updates Before installation of this product please read important notice disclosure and warranty conditions printed on the back of the box The barb hose fittings require only a small amount of force to screw them in otherwise the high flow fittings might break These fittings do not need to be tightened with much force because the liquid seal is made using o rings Replace this heat sink with longer mosfet block place 1 me 4 AA Replace this heat sink with shorter mosfet block place 2 1 Place Mosfet Block Part 1 longer in place 1 and Part 2 shorter in place of 2 Use enclosed M3x8mm screws with washer to install the Mosfet blocks Do not use high force to tighten the block as this would cause bending of motherboard and might damage mosfet chips Copper Part 2 contains 3 holes Use mounting combination see right bottom picture according to the type of your motherboard X58 series Part 1 Mosfet X58 series Part 2 Mosfet 1 Pl2. ease attach waterblock to your motherboard like shown on picture bellow with all mounting items and thermal pads provided by EKWB You might need to trim thermal pads a bit in order to provide clear path to mounting holes ies PE i a i 4 x screws M3x8 7985DIN All disclosures notices and warranty conditions are being written on the back of the box Released on 15 of February 2010
Download Pdf Manuals
Related Search