Home

Panasonic DMP-BDT330

1. 29 Reference SSeS Troubleshooting guide 35 Messages 38 Specifications 40 Limited Warranty 45 46 Referencia rapida en espanol Spanish Quick Reference 47 INDEX a ew Back cover Accessories Check the supplied accessories before using this unit 1 Remote control N2QAYB000874 2 Batteries for remote control 1 AC power supply cord K2CB2CB00022 For Canada The enclosed Canadian French label sheet corresponds to the English display on the unit E Product numbers provided in this Owner s Manual correct as of December 2012 These may be subject to change Do not use AC power supply cord with other equipment B Using the remote control Insert so the poles and match those in the remote control R6 LR6 AA Alkaline or manganese batteries Point it at the remote control signal sensor on this unit 3 9 Unit and media care W Clean this unit with a soft dry cloth e Never use alcohol paint thinner or benzine to clean this unit e Before using chemically treated cloth carefully read the instructions that came with the cloth E This unit s lens Use the lens cleaner not supplied to clean the unit s lens B Clean discs DO NOT Wipe with a damp cloth and then wipe dry E Disc and card handling precautions e Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc Do no
2. SET D 0 stands for a number gt The remote control and this unit are using different codes Change the code on the remote control Press and hold OK and the indicated number button at the same time for more than 5 seconds U59 gt Temperature of this unit is hot and the unit switches to standby for safety reasons Wait for about 30 minutes Select a position with good ventilation when installing the unit I or F stands for a number There is something unusual Check the unit using the troubleshooting guide If the service number remains displayed do the following D Disconnect the plug from the AC outlet wait a few seconds then reconnect it Press 0 I to turn the unit on If the service number remains displayed despite doing the above request service from the dealer Inform the dealer of the service number when requesting service Vv START gt The system is being restarted during the firmware update Please do not turn off the unit UPDO L1 stands for a number gt The firmware is being updated Please do not turn off the unit FIN gt The firmware update is complete vatavzs 39 Reference Specifications i File format El General File format Extension Reference Signal
3. 2 Selectan item and change the settings To exit the screen Press OPTION Regarding Language gt 42 Operation Menu E Soundtrack Show or change the soundtrack W Audio channel Select the audio channel number E Subtitle Change the subtitle settings E Angle Select the number of the angle W Repeat Play Select the item that you want to repeat e The items displayed differ depending on the type of media e Select Off to cancel E Shuffle Select whether or not to play random E Start Slideshow Start the slideshow E Status Show the status messages Playback E Rotate Right E Rotate Left Rotate the still picture E Wallpaper Set the still picture to the wallpaper of HOME menu 2 18 W icon Personalization Set the still picture as your user icon gt 19 Settings E Video The recording method of original video appears W Primary Video The recording method of original primary video appears vaTav26 27 W Secondary Video Select on off for images The recording method of original video appears e During search slow motion or frame by frame only the primary video is displayed Video Select on off for audio and the Soundtrack language E Top Menu Display Top Menu E Pop up Menu Display Pop up Menu Audio Settings B Dialog Enhancer The volume of the center channel is
4. gt select Player Settings gt select Network and press OK gt select Network Settings and press OK gt select Wireless Settings and press OK gt select Connection Setting and press OK gt select Manual setting and press OK 2 Press OK to select SSID and enter your SSID Wireless Settings Enter your network name SSID to connect e f your wireless network is encrypted go to step vatavzs 15 Connections amp Settings m Refer to the operating instructions of the hub or router WPS Wi Fi Protected Setup is a standard that facilitates settings relating to the connection and security of wireless LAN devices To see whether your wireless router supports WPS check the wireless router operating instructions You can perform this setup anytime by selecting Easy Network Setting in the Setup menu gt 32 You can redo these settings individually using Network Settings 3 32 Do not use this unit to connect to any wireless network for which you do not have usage rights During automatic searches in a wireless network environment wireless networks SSID for which you do not have usage rights may be displayed however using these networks may be regarded as illegal access After performing network settings on this unit the settings encryption level etc of the wireless router might change When you have trouble getting online on your PC perform
5. m4a tags LASER 660 nm DVDs 405 nm BDs AAC aac Maximum sampling rate Specification Laser power No hazardous 48 kHz 320 kbps aa anon e emitise with the This unit supports ID3 l Power supply AC us 60 Hz WMA SWMAT wma Mexia sampling rate 48 kHz 355 kbps Power Dimensions WxHxD Including the projecting parts 2 Approx 14 W consumption Power consumption in Approx 0 5 W standby mode Power consumption in BDT330 Approx 6 W quick start standby BDT230 Approx 5 5 W mode BDT330 Approx 430 mmx41 mmx181 mm Approx 16 15 16 x 1 5 8 x 7 3 16 BDT230 Approx 430 mmx38 mmx179 mm Approx 16 15 6 x 1 1 2 x 71 16 Mass Weight BDT330 BDT230 Approx 1 6 kg 3 52 Ibs Approx 1 4 kg 3 08 Ibs e Specifications are subject to change without notice 40 varavz6 e With certain recording states and folder structures he play order may differ or playback may not be possible ll Audio information The audio output differs depending on which terminals are connected to the amplifier receiver and the settings on the unit gt 30 Digital Audio il Supported format for DLNA e File formats that are not supported by your DLNA server cannot be played Output Video e The number of channels listed is the maxi
6. Panasonic Owner s Manual Blu ray Disc Player Model No DMP BDT330 DMP BDT230 Unless otherwise indicated illustrations in this Owner s Manual are of DMP BDT330 Firmware updates Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology Panasonic recommends updating your firmware as soon as you are notified For details refer to Firmware updates gt 16 or http panasonic jp support global cs This site is in English only Thank you for purchasing this product Please read these instructions carefully before using this product and save this manual for future use If you have any questions contact U S A and Puerto Rico 1 800 211 PANA 7262 Canada 1 800 561 5505 Register online at www panasonic com register U S customers only P PC VQT4V26 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat
7. AND PUERTO RICO Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 Panasonic Products Limited Warranty Limited Warranty Coverage For USA and Puerto Rico Only If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Marketing Company of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Blu ray Disc Player 1 Year 90 Days All included Accessories Except Non Rechargeable Batteries 80 Days Not Applicable Only Non Rechargeable Batteries 10 Days Not Applicable During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States or Puerto Rico This warranty is ext
8. Slideshow Play a slideshow of photos and adjust various settings during the playback 1 Insert the media 2 Select Photos 3 Select an item and press the green button The following items can be set Ea The usable functions and the operating method may vary with each disc please refer to the instructions on the disc and or visit their website e BD Live Internet Access may need to be changed for certain discs gt 33 22 vatave6 Start the slideshow Start You can display still pictures in Slideshow the selected folder one by one at a constant interval Display interval Change the display interval Transition Select the effect when sliding Effect pictures Set whether to repeat the Repeat Play sideshow KO e Still pictures displayed as X cannot be played back with this unit DLE VIERA Connect Enjoying Netflix etc VIERA Connect allows you to access some specific websites supported by Panasonic and enjoy Internet contents such as photos videos etc from VIERA Connect Home screen e Some services such as Netflix require a registered account For details of your Netflix account refer to Netflix VIERA Connect provides a variety of selected Internet services such as the following e Online movie rental service Video browsing service NES LIMES g Cx Toa Internet Images are for il
9. registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOOR WP oo CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN CAUTION TO REDUCE THE RISK OF ELECTRIC
10. the network settings on your PC in accordance with the settings of wireless router Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party or the leaking of data such as personal or secret information SSID An SSID Service Set IDentification is a name used by wireless LAN to identify a particular network Transmission is possible if the SSID matches for both devices Reprogramming the remote control If you have more than one Panasonic player recorder and the remote control operates both products at once you will need to change the remote control code to prevent this occurrence gt 34 Remote Control Code 16 varavee Firmware updates Occasionally Panasonic may release updated firmware for this unit that may add or improve the way a feature operates These updates are available free of charge This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection When a new firmware version is available the following message is displayed New firmware is available Please update firmware in Setup To update the firmware Press HOME gt press OK to select Setup gt select Player Settings gt select System and press OK gt select Firmware Update and press OK gt select Update Now and press OK DO NOT DISCON
11. 3D compatible video software W 3D AVCHD Output Select the output method of 3D AVCHD videos W 3D Playback Precautions Set to display or hide the 3D viewing warning Screen when playing back the 3D compatible video software E Pop Out Level 3 gt 28 Language W Audio Language Choose the language for audio e f Original is selected the original language of each disc will be selected e Enter a code gt 42 when you select Other sebo en E Subtitle Language Choose the language for the subtitle e f Auto is selected and the language selected for Audio Language is not available subtitles of that language will automatically appear if available on that disc e Enter a code gt 42 when you select Other E Menu Language Choose the language for the disc menus e Enter a code gt 42 when you select Other KERKE W Subtitle Text Select a suitable item according to the language used for MKV subtitles text e This item is displayed only after playing back a file W On screen Language Choose the language for menus and on screen messages varavze 31 Settings Network W Easy Network Setting gt 14 gt Network Service Settings gt 23 VIERA Connect Press OK to show the following settings W Network Settings Perform network related settings individually Press OK to show the following settings gt LAN Connection Mode
12. 7782 Turkmen 8475 Estonian 6984 Moldavian 7779 Twi 8487 Faroese 7079 Mongolian 7778 Ukrainian 8575 Fiji 7074 Nauru 7865 Urdu 8582 Finnish 7073 Nepali 7869 Uzbek 8590 French 7082 Norwegian 7879 Vietnamese 8673 Frisian 7089 Oriya 7982 Volap k 8679 Galician 7176 Pashto Pushto 8083 Welsh 6789 Georgian 7565 Persian 7065 Wolof 8779 German 6869 Polish 8076 Xhosa 8872 Greek 6976 Portuguese 8084 Yiddish 7473 Greenlandic 7576 Punjabi 8065 Yoruba 8979 Guarani 7178 Quechua 8185 Zulu 9085 42 varavee AVCHD AVCHD 3D AVCHD Progressive and AVCHD 3D Progressive are trademarks of Panasonic Corporation and Sony Corporation Java is a registered trademark of Oracle and or its affiliates Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 226 616 6 487 535 7 212 872 7 333 929 7 392 195 7 272 567 amp other U S and worldwide patents issued amp pending DTS HD the Symbol amp DTS HD and the Symbol together are registered trademarks amp DTS HD Master Audio is a trademark of DTS Inc Product includes software O DTS Inc All Rights Reserved HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States
13. After connecting your new player for the first time and pressing M the basic settings screen will appear Preparation Turn on the TV and select the appropriate video input 1 Press d Setup screen appears 2 Follow the on screen instructions to continue with the settings Easy Network Setting After completing Easy Settings you can perform Easy Network Setting Wired connection Select Wired and press OK Select a connection mode Wired Wireless G e O RETURN LL You can perform this setup anytime by selecting Easy Settings in the Setup menu gt 33 14 varavee Follow the on screen instructions to establish your connection settings Wireless connection Select Wireless and press OK 2 Select Search for wireless network or WPS PUSH button method and press OK then follow the on screen instructions to continue with the settings Select a connection method Please refer to the operating instructions of your wireless access point about connection methods l Search for wireless network o WPS PUSH button method B WPS PUSH button method If you are using a wireless router that supports WPS Wi Fi Protected Setup you can easily perform the settings B Search for wireless network The available wireless networks will be displayed To obtain your network name SSID and
14. Connect the power supply cord after making all connections e Before making any connections we recommend that you temporarily disconnect all the units from AC power e Use the High Speed HDMI cables Non HDMI compliant cables cannot be utilized It is recommended that you use Panasonic s HDMI cable When outputting 1080p signal please use HDMI cables 5 0 meters 16 4 ft or less BDT330 Use HDMI AV OUT MAIN terminal To a household AC outlet HDMI IN di JD AC power supply cord supplied BDT230 e This unit consumes a small amount of AC power gt 40 even when turned off For the purpose of power conservation the unit can be disconnected if you will not be using it for extended period of time 10 varavee Connecting to an amplifier receiver Perform either one of the following connections in accordance with your amplifier receiver input terminal HDMI AV OUT BDT330 Use HDMI AV OUT MAIN terminal NS GE HDMI cable HDMI cable won ROT ub e p HDMI IN BDT230 Amplifier receiver BE e e Set Digital Audio Output gt 30 e When connecting to a non 3D compatible amplifier receiver connect this unit to a TV then connect the TV and the amplifier receiver Please note however that the audio can only be up to 5 1ch e When using the TV or
15. OK then follow the indications on the screen 6 Operate the DMC compatible devices To exit from Media Renderer screen Press HOME Ca About DLNA and Media renderer For more details refer to the following website and the operating instructions for each of the equipment http panasonic jp support global cs This site is in English only e Wi Fi Direct connection while using Home Network feature is only temporary and the network connection method returns to the original setting when exiting e Depending on the device or connection environment the data transfer rate may decrease e Depending on the contents and the connected equipment playback may not be possible e Items displayed in gray on the display cannot be played back by this unit e This unit can be played back via connected equipment only when controlled using DMC vaTaves 25 Playback HDMI CEC This unit supports HDMI CEC Consumer Electronics Control function You can use this function by connecting the equipment with an HDMI cable See the operating instructions for connected equipment for operational details BDT330 Only when connecting via an HDMI AV OUT MAIN terminal on this unit Preparation Set HDMI CEC to On 3 34 The default setting is On Set the HDMI CEC operations on the connected equipment e g TV Turn on all HDMI CEC compatible equi
16. THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Customer Services Directory United States and Puerto Rico Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com help or contact us via the web at http www panasonic com contactinfo You may also contact us directly at 1 800 211 PANA 7262 Monday Friday 9am 9pm Saturday Sunday 10am 7pm EST For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases United States and Puerto Rico Purchase Parts Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at http www pstc panasonic com Or send yo
17. a button is pressed on the remote control change the code on the remote control gt 38 The TV tuner mode is not displayed when the TV is switched on gt This phenomenon may occur depending on the TV setting when Quick Start is set to On gt Depending on the TV this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting You have forgotten your ratings password You want to cancel the ratings level gt The ratings level returns to the factory preset D Turn the unit on Press and hold OK the blue button and the yellow button on the remote control at the same time for more than 5 seconds OORET is displayed on the unit s display Press gt right repeatedly on the remote control until 03 VL is displayed on the unit s display Press OK vaTaves 35 Settings Reference This unit does not recognize the USB connection correctly gt Disconnect and reconnect the USB cable If it still does not recognize the connection turn this unit off and on again USB devices may not be recognized by this unit when connected using the following a USB hub a USB extension cable gt Ifyou connect USB HDD to this unit use the USB cable that is supplied with the HDD Picture The images from this unit do not appear on the TV Picture is distorted
18. a problem with this unit Regular disc rotating sounds Image disturbance during search Image disturbance when replacing 3D discs B Unit does not respond to remote control or front panel buttons Disconnect AC power supply cord wait 1 minute then reconnect AC power supply cord B Cannot eject disc D Turn the unit on Press and hold OK the blue button and the yellow button on the remote control at the same time for more than 5 seconds 00RET is displayed on the unit s display 3 Press gt right repeatedly on the remote control until O6FTO is displayed on the unit s display Press OK General operation To return to the factory preset gt Select Yes in Restore Default Settings in the Setup menu gt 34 To return all settings to the factory preset gt Reset the unit as follows D Turn the unit on Press and hold OK the blue button and the yellow button on the remote control at the same time for more than 5 seconds OORET is displayed on the unit s display Press gt right repeatedly on the remote control until 08FIN is displayed on the unit s display Press and hold OK for more than 5 seconds The remote control does not work properly Change the batteries in the remote control gt 5 gt The remote control and this unit are using different codes If SET LT is displayed on the unit s display when
19. also available for free in our website below http panasonic net avc oss bdplayer AWBPM13A html Adobe Flash Lite for Digital Home Software licensed by Adobe Systems Incorporated or its affiliates For Adobe please be i You are not permitted Flash Lite for Digital Home Software Flash Software aware of the following o distribute and copy this Flash Software to any third party ii You are not permitted o modify the Flash Software and create derivative works of the Flash Software iii You are not permitted o decompile reverse engineer disassemble and otherwise reduce the Flash Software to a human perceivable form You are not permitted iv o claim any damages including direct indirect special incidental punitive and consequential damages arising out o or in connection with the Flash Software v You fu lly agree that the ownership of the Flash Software is that of Panasonic Corporation and or its suppliers or licensors You agree and acknowledge that it is possible that you cannot access the contents unless you do not obtain and install the latest version of the Flash Software Reference varavze 43 1 MS WMA This product is protected by certain intellectual property rights of Microsoft Corporation and third parties Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an aut
20. and other countries This product is licensed under the AVC patent portfolio license and VC 1 patent portfolio license for the personal and non commercial use of a consumer to i encode video in compliance with the AVC Standard and VC 1 Standard AVC VC 1 Video and or ii decode AVC VC 1 Video that was encoded by a consumer engaged in a personal and non commercial activity and or was obtained from a video provider licensed to provide AVC VC 1 Video No license is granted or shall be implied for any other use Additional information may be obtained from MPEG LA LLC See http www mpegla com VIERA Connect is a trademark of Panasonic Corporation MPEG Layer 3 audio coding technology licensed from Fraunhofer IIS and Thomson SDXC Logo is a trademark of SD 3C LLC DVD Logo is a trademark of DVD Format Logo Licensing orporation C The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi Wi Fi Protected Setup Wi Fi Direct Miracast WPA and WPA2 are marks or registered marks of the Wi Fi Alliance DLNA the DLNA Logo and DLNA CERTIFIED are trademarks service marks or certification marks of the Digital Living Network Alliance Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries Android is a trademark of Goog
21. be available for specific countries and may be presented in specific languages Playback vaTav26 23 Home Network feature Using Miracast You can enjoy the content you are viewing on a Miracast compatible smartphone etc on the big screen of your TV e Compatible with Android device ver 4 2 and above and Miracast certified For information on whether the smartphone etc supports Miracast contact the manufacturer of the device Miracast compatible device 1 Press MIRACAST 2 Operate the Miracast compatible device e On the device enable Miracast and select this unit DMP BDT330 or DMP BDT230 as the device to be connected For details refer to the instructions supplied with the device To exit from Miracast Press HOME 24 voravzs Playing back contents on the DLNA server You can share photos videos and music stored in the DLNA Certified media server PC with Windows 7 installed smartphone etc connected to your home network and enjoy the contents with this player e About support format of DLNA gt 41 e Before using the DLNA feature be sure to configure the DLNA server on your Home Network Preparation Perform network connection 3 13 and network settings gt 14 of this unit Perform Home Network settings of the connected equipment Add the contents and folder to the libraries of the Windows Media Player or the smartp
22. encryption key password The default settings may be printed on the router If the SSID and password have been changed consult the person responsible for setting up your network For more details refer to the manual supplied with the wireless broadband router or contact your Internet provider ESIE 00000A key 00000000000 For more information or assistance refer to http www panasonic com help U S customers only Select your network name and press OK e f your network name is not displayed search again by pressing the red button on the remote control Stealth SSID will not be displayed in this case enter manually Connection Setting Select a wireless network for connection Reception When your wireless network is encrypted Press OK to select Encryption Key Wireless Settings Enter the encryption key password of the wireless network Encryption Key 8 Enter your encryption key password e You can switch between capital and lower case letters by pressing the Shift key 0600050000 E ER ERES E EIER ES EE CI ICI HAHA ve fwd Py det fel pops FLULELELL GL T E Symbols E Abhanumeic f Other Characters amp d RETURN To enter your network name SSID manually If your network name SSID is not displayed in step D follow these steps 1 Todisplay the network name SSID input screen Press HOME gt press OK to select Setup
23. esta posici n La posici n se borra si se abre la bandeja e En los discos BD Video incluidos los BD J la funci n de reanudaci n de la reproducci n no funciona Pausa Pulse I IPAUSE e Pulse HPAUSE otra vez o gt PLAY para reiniciar la reproducci n B squeda C mara lenta B squeda Durante la reproducci n pulse SEARCH 44 o SEARCH C mara lenta Durante la pausa pulse SEARCHPP La velocidad aumenta hasta 5 pasos e M sica y MP3 etc La velocidad est fija en un paso e Pulse gt PLAY para recuperar la velocidad de reproducci n normal Salto Durante la reproducci n o la pausa pulse 44 o gt gt Salta hasta el t tulo cap tulo o pista que desee reproducir Reference varavze 47 Index O Audio Changing audio 20 Language 31 42 O BD Live 22 O DLNA 24 O File format 40 Firmware update 16 HDMI CEC 26 Q LAN 13 Language Audio 31 Menu 31 On screen 31 Soundtrack 27 Subtitle 27 31 Media Renderer 25 Miracast 24 Multi User Mode 19 Network Connection 13 Setting 14 32 Pop up meru 21 Quick Start 34 Restore Default Settings 34 Resume play function 20 Subtitle 27 Q USB device
24. in recording media as a wallpaper gt 27 Wallpaper Select Wallpaper 4 Select Confirm and press OK To change the personalized user information Select Edit User Information from Setup menu gt 34 Switching the user Press the colored buttons in the HOME menu to switch to the user corresponding to the button vaTavz6 19 Playback Playback 1 Insert the media Playback starts depending on the media 2 Select the item to play and press OK Repeat this procedure if necessary ae DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED Press STOP when you have finished playback to protect the unit s motor your TV screen and so on MKV Successive play is not possible It is not possible to play back AVCHD and MPEG2 videos which have been dragged and dropped or copied and pasted to the media To save on electricity this unit is turned off automatically if there is no button operation for about 30 minutes when not playing back such as when paused or displaying the menu displaying still pictures etc Compatible with ENERGY STAR 20 VQT4V26 Operations during playback The following functions may not work depending on the media and contents Stop Press ESTOP The stopping point is memorized Resume play function Press BP PLAY to restart from this point e The point is cleared if the media is removed e On BD Video discs including BD J the resume pla
25. n a un televisor compatible con HDMI BDT330 Cable HDMI ADMIN 0 9 p BDT230 Conexi n a un televisor compatible con HDMI y a un amplificador receptor compatible con HDMI Cable HDMI BDT330 HDMI IN ARC BDT230 Amplificador Receptor Conecte el cable de alimentaci n de CA por ltimo A una toma de corriente dom stica Cable de alimentaci n de CA incluido Con ctelo cuando haya realizado el resto de conexiones Ahorro de energ a Esta unidad consume una peque a cantidad de energ a aunque est ajustada en el modo de espera Accionamiento r pido Desactivado aprox 0 5 W Para ahorrar energ a cuando no vaya a utilizar la unidad durante mucho tiempo desench fela de la toma de corriente Reproducci n b sica Preparaci n Encienda el televisor y seleccione la entrada de v deo adecuada en el televisor 1 Pulse 0 para encender la unidad Despu s de conectar su nuevo reprodutor y pulsar el bot n de encendido aparecer la pantalla de la configuraci n b sica 2 Inserte el medio Inicia la reproducci n Pulse gt PLAY Parada Pulse BSTOP La posici n de detenci n se memoriza Funci n de reanudaci n de la reproducci n Pulse PLAY para reiniciar la reproducci n desde
26. new batteries or different types at the same time Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed e Do not take apart or short circuit Do not attempt to recharge alkaline or manganese batteries Do not use batteries if the covering has been peeled off Remove batteries if the remote control is not going to be used for a ong period of time Store in a cool dark place Do not place objects filled with liquids such as vases on this unit Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal Wireless LAN connection The following limits are in place regarding the usage of this unit You must be aware of these limits before using this unit Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits or to any condition of use or disuse of this unit e Data transmitted and received over radio waves may be intercepted and monitored This unit contains delicate electronic components Please use this unit in the manner in which it was intended and follow the following points Do not expose this unit to high temperatures or direct sunlight D
27. try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Trade Name Panasonic Model No DMP BDT330 DMP BDT230 Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Support Contact Panasonic Consumer Marketing Company of North America Telephone No 1 800 211 PANA 7262 Precautions WARNING Unit To reduce the risk of fire electric shock or product damage e Do not expose this unit to rain moisture dripping or splashing Use only the recommended access
28. 7 O VIERA Connect Wireless LAN or call 1 888 769 0149 USA Only Disposal may be regulated in your community due to environmental considerations For disposal or recycling information please visit Panasonic website http Awww panasonic com environmental D efficiency ENERGY STAR As an ENERGY STAR Partner Panasonic has determined that this product meets the ENERGY STAR guidelines for energy For Canada only The word Participant is used in place of the word Partner Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 http www panasonic com Panasonic Corporation 2012 Printed in China 5770 Ambler Drive Mississauga Ontario LAW 2T3 www panasonic ca Panasonic Canada Inc En Ep VQT4V26 F1212SA0
29. BEAM 1EC60825 1 CLASS 2 ATTENTION BAYONNEMENT LASER VISIBLE ET INVISIBLE CLASSE 2 N CAS D OUVERTURE NE PAS REGARDER DANS LE FAISCEAU FORSIGTIG SE OG USYNLIG LASERSTR LING KLASSE 2 N R L GET ER BE INT UNDGA AT SE LIGE IND STR LEN VARO AVATTAESSA OLET ALTTIINA LUOKAN 2 N KYV JA NAKYMATONTA LASERSATEILYA ALA TUIJOTA SATEESEEN VARNING KLASS 2 SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD STIRRA EJ IN STR LEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 2 WENN ABDECKUNG GE FFNET NICHT IN DEN STRAHL BLICKEN EBA TARA AAA BRIER REO ESE ORAR FHS o E AO ERRAT CU Inside of product varav 3 Table of contents IMPORTANT SAFETY INSTRUCTIONS 2 Precautions Getting started AAA Accessories 5 Unit and media care 5 Playable media 6 Control reference guide 8 Connections amp Settings AAA Connecting to a TV 10 Connecting to an amplifier receiver 11 Connecting to the network 13 Settings ose a id 14 Playback _E_ htEEo ____ Inserting or removing media 17 HOME menu 18 Multi User Mode 19 Playback 20 VIERA Connect Enjoying Netflix etc 23 Home Network feature 24 HDMI CEG aos 26 4 varavz6 Settings Optionmenu 27 Setup menu
30. DMI SUB Output Option menu to the default settings except for Mode amp 30 is set to V OFF and the some settings of network ratings remote control power of the connected equipment to the code language etc HDMI AV OUT SUB is on gt Edit User Information Change the user information registered in the HOME menu E Start up Banner Select whether to display the banner after turning on this unit gt 18 W Quick Start Speed of start up from standby mode is increased e When set to On the internal control unit will be powered and the idle power consumption will increase compared to when set to Off About the power consumption c 40 34 vartavzs Troubleshooting guide Before requesting service please perform the following steps Do you have the latest firmware installed Panasonic is constantly improving the unit s firmware to ensure that our customers are enjoying the latest technology gt 16 v Make the following checks and visit our website for more information For U S A www panasonic com help Enter the model number For Canada http www panasonic ca v Or visit our website to find a service center You can find a service center near you easily on our website Other support information Customer Services Directory United States and Puerto Rico gt 45 or Limited Warranty Only for CANADA gt 46 The following do not indicate
31. E ca e Items to be displayed may vary with the media Where necessary set Mixed Data Disc Option when using a disc with both data files MP3 JPEG MKV etc and Video BDAV and AVCHD gt 34 Multi User Mode Multi User Mode allows individuals to customize settings and switch to their saved settings easily Up to 4 people can use the unit with their own settings The following settings can be personalized e The user icon e The wallpaper of HOME menu e The audio and picture settings gt 27 29 oE no Blu ray Disc Player Network E raa Photos kn Setup Music Videos E De Pesona E e 2nd user user 1 Q The user name and icon currently selected Personalize a new user and switch between users with colored buttons Personalizing a new user NN Press HOME 2 Press the colored button that indicates new user personalization 3 Select an item and change the settings according to the indications The following items can be set Input c Personalize a user name Nickname Personalize a user icon Select from Illustrations The image can be selected from Select icon prepared illustrations Create from Photos You can select a photo in recording media as an icon gt 27 Icon Personalization Personalize a background of the HOME menu e n addition to default wallpapers you can select a photo
32. NECT the unit from the AC power or perform any operation while the update takes place After the firmware is installed FIN will be displayed on the unit s display Unit will restart and the following screen will be displayed The firmware was updated Current Version X XX Op Oh 7 0 RETURN ca If downloading on this unit fails or this unit is not connected to the Internet then you can download the latest firmware from the following website and burn it to a CD R to update the firmware http panasonic jp support global cs This site is in English only To show the firmware version on this unit gt 34 Firmware Version Information Downloading will require several minutes It may take longer or may not work properly depending on the connection environment If you do not want to check for the latest firmware version set Automatic Update Check to Off 34 Inserting or removing media BDT330 d e EX BDT230 mL Notes e When inserting a media item ensure that it is facing the right way up e When removing the SD card press the center of the card and pull it straight out e lf you connect a Panasonic product with a USB connection cable the setup screen may be displayed on the connected equipment For details refer to t
33. PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA INC BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other memory or recorded content This list of items is not exhaustive but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory WARRANTY SERVICE For product operation and information assistance please contact PRODUCT OPERATION ASSISTANCE Customer Care Centre Telephone 1 800 561 5505 Fax 905 238 2360 PRODUCT REPAIRS Please locate your nearest Authorized Servicentre Link Support Panasonic Servicentre locator on www panasonic ca IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid adequately insured and preferably in the original carton Include details of the defect claimed and proof of date of original purchase 46 varavz6 Referencia r pida en espa ol Spanish Quick Reference Conexiones b sicas Conexi
34. SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance 2 VQT4V26 THE FOLLOWING APPLIES IN THE U S A AND CANADA This device complies with Part 15 of FCC Rules and RSS Gen of IC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device Contains FCC ID NKR P1 Contains IC ID 4441A P1 This transmitter must not be co located or operated in conjunction with any other antenna or transmitter This product is restricted to indoor use due to its operation in the 5 15 to 5 25 GHz frequency range FCC and IC require this product to be used indoors for the frequency range 5 15 to 5 25 GHz to reduce the potential for harmfu interference to co channel Mobile Satellite systems High power radars are allocated as primary
35. Select the LAN connection method e Select Wireless Master when you make a direct wireless connection between this unit and a Home Network device Internet connection is not available when this item is Selected Wireless Settings This allows the wireless router and connection settings to be set Current connection settings and connection state can be checked Connection Setting The wireless router connection wizard will be displayed Double Speed Mode Setting 2 4GHz Set the connection speed for a 2 4 GHz wireless format e f you connect using the Double Speed Mode 40MHz 2 channels use the same frequency band and there is consequently a greater risk of reception interference This can cause the connection speed to drop or become unstable gt IP Address DNS Settings This is for checking the state of the network connection and setting the IP address and DNS related Press OK to show the respective setting Proxy Server Settings This is for checking the state of connection with the Proxy server and performing settings Press OK to show the respective setting 32 vatave6 Time Zone Set the unit s time to match your location e Some VIERA Connect contents require the time zone to be set Set the time zone if necessary DST Select On when using Daylight Saving time Network Drive Connection It is possible to access the shared folder of equipment not compatible
36. al Read the disc s instructions carefully vare 7 Control reference guide 14 E PLAY ES 5 11 SKIP SLOW SKIP i tea IIPAUSE gt i 8 vartavzs O o 1o00 11 12 13 14 15 16 17 18 19 Turn the unit on and off TV operation buttons You can operate the Panasonic TV using the unit s remote control Some buttons may not work depending on the TV TV Turn the TV on and off AV Change input VOL Adjust the volume Select title numbers etc Enter numbers or characters Cancel Basic playback control buttons gt 20 Show status messages gt 21 Show Pop up menu Top menu 21 Show Option menu gt 27 Colored buttons red green blue yellow Used for various purposes depending on the display Transmit the remote control signal Open or close the disc tray 3 17 Select audio gt 20 Show Miracast screen gt 24 Show the Home screen of the VIERA Connect gt 23 Exit the menu screen Show Netflix screen c 23 Show HOME menu gt 18 A V lt gt Move the highlight for selection OK Confirm the selection LI gt Frame by frame gt 20 Return to previous screen 99 NOOO fF our WP BDT330 Getting started i il m ES LI FA Pull to flip down t
37. amplifier receiver that does not have the indication of ARC non ARC compatible on the HDMI terminal the amplifier receiver and TV must also be connected using an optical digital cable in order to enjoy the TV s sound through the amplifier receiver HDMI AV OUT SUB BDT330 You can enjoy richer sound by using the HDMI AV OUT SUB terminal HDMI cable HDMI cable CEW HDMI IN v Hi HDMI IN cS oS E Hs Gb Amplifier receiver e Set HDMI SUB Output Mode to V OFF gt 30 Audio is output in high resolution regardless of compatibility of the amplifier receiver with 3D e It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible even if the amplifier receiver is not 3D compatible e The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC gt 26 The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC vatavzs 11 Connections amp Settings OPTICAL BDT330 Optical digital cable s Ip OPTICAL IN OPTICAL BDT230 E Amplifier receiver J e Set HDMI Audio Output to Off gt 30 e Set Digital Audio Output gt 30 12 voravzs Connecting to the network The following services can be used when this unit is connected to broadband e Firmware ca
38. arranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SERIAL NUMBER commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF
39. ay not be possible B SD card e miniSD Cards microSD Cards microSDHC Cards and microSDXC Cards can be used but must be used with an adaptor card These are T usually supplied with such cards or otherwise customer provided E e To protect the card s contents move the record prevention tab on the SD card to LOCK e This unit is compatible with SD Memory Cards that meet SD Card Specifications FAT12 and FAT16 formats as well as SDHC Memory Cards in FAT32 format and SDXC Memory Cards in exFAT e f the SD card is used with incompatible computers or devices recorded contents may be erased due to the card being formatted etc e Usable memory may be slightly less than the card capacity B USB device e This unit does not guarantee connection with all USB devices e This unit does not support USB device charging e FAT12 FAT16 FAT32 and NTFS file systems are supported e This unit supports USB2 0 High Speed e This unit supports an HDD formatted in FAT32 and NTFS If the HDD is not recognized the power to the HDD may not be supplied Supply power from an external source Getting started Cu t may not be possible to play the above media in some cases due to the type of media the condition of the recording the recording method and how the files were created The producers of the disc can control how discs are played so you may not always be able to control play as described in this Owner s Manu
40. be played in this unit Any other disc that is not specifically supported or previously described e DVD RAM e Super Audio CD e Photo CD e DVD Audio e Video CD and Super Video CD e HD DVD E Region management information BD Video This unit can play BD Video discs supporting the region code A Example DVD Video This unit can play DVD Video discs supporting the region number 1 or ALL Example ai e B Finalize DVD R RW R DL R RW R DL and CD R RW recorded by a recorder needs to be finalized by the recorder to play on this unit Please refer to the recorder s instructions B BD Video e This unit supports high bit rate audio Dolby Digital Plus Dolby TrueHD DTS HD High Resolution Audio and DTS HD Master Audio adopted in BD Video e If Dolby D Dolby D Dolby TrueHD is set to PCM and DTS Neo 6 is set to Off the maximum possible number of Dolby sound is 5 1ch PCM gt 30 31 BH 3D e 3D videos and 3D still pictures can be played back when this unit is connected to a 3D compatible TV using a High Speed HDMI Cable e 2D video can be enjoyed as 3D virtually 3 28 B Music CD Operation and sound quality of CDs that do not conform to CD DA specifications copy control CDs etc cannot be guaranteed e The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio CD DA format so playback m
41. creen etc can be adjusted during 3D playback Setup menu Change the unit s settings if necessary The settings remain intact even if you switch the unit to standby Some items in the Setup menu are common to the Option menu You can get the same effect with both menus About Multi User Mode Settings of the items with this indication are saved by the respective users registered in the HOME menu Please refer to page 19 for details about user registration and switching 1 Press HOME 2 Press OK to select Setup 3 select Player Settings Picture Mode lormal D ves Se S EM Piro Aduna D Audio HOMI Output Po ABG Language Network A Ratings Be system E ND er 4 Select an item and change the settings To exit the screen Press HOME Video W Picture Mode gt 28 W Picture Adjustment 3 gt 28 W HDMI Output Press OK to show the following settings gt HDMI Resolution The items supported by the connected devices are indicated on the screen as x When any item without x is selected the images may be distorted e f Auto is selected the best suited output resolution to the connected TV is automatically selected To enjoy high definition video up converted to 1080p you need to connect the unit directly to 1080p compatible HDTV High Definition TV If this unit is connected to an HDTV through other equipment t
42. ct System W Easy Settings You can execute basic settings E Display Settings Press OK to show the following settings TV Aspect Set to match the type of TV connected When connected to a 4 3 aspect TV and playing 16 9 ratio image The sides are cut f off so the picture fills the screen When playing BD Video video is output as 4 3 Letterbox 4 3 Pan amp Scan Black bands 4 3 appear at the top Letterbox and bottom of the picture When connected to a 16 9 widescreen TV and playing 4 3 ratio image Video is displayed as a 4 3 ratio 16 9 image in the center of the Screen Video is displayed as a 16 9 Full horizontally stretched 16 9 image Screen Saver Function This is to prevent image retention on the screen e When this is set to On If a list of playback content is displayed and there is no operation for 10 minutes or more the screen switches to HOME menu automatically While playing and pausing etc this function is not available Status Messages Choose whether to show status messages automatically vaTav26 33 Settings gt HDMI CEC Set to use HDMI CEC function when connected via HDMI cable to a device that supports HDMI CEC e Select Off when you do not want to use HDMI CEC W Unit Settings Press OK to show the following settings M
43. ended only to the original purchaser of a new product which was not sold as is Mail In Service For assistance in the U S A and Puerto Rico in obtaining repairs please ship the product prepaid to Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen TX 78503 panacare us panasonic com Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www panasonic com repair When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The w
44. ettings gt 33 Confirm a USB device is connected to the USB port gt 17 Network I can t connect to the network Confirm the network connection and settings gt 13 14 32 gt There may be obstacles that prevent the unit from detecting your home network Bring the unit and the wireless router closer to each other This unit may be able to detect your network name gt 16 SSID gt Check the operating instructions for each device and connect accordingly Cannot play current title gt Confirm the network connection and settings gt 13 14 32 When using wireless LAN connection video from the DLNA Certified media server is not played back or video frames are dropped during playback Higher transfer rate router such as 802 11n 2 4 GHz or 5 GHz wireless router may solve the problem If you use 802 11n 2 4 GHz or 5 GHz wireless router it is necessary to set the encryption type to AES Simultaneous use with a microwave cordless telephone etc at 2 4 GHz may result in connection interruptions or other problems gt On the Wireless Settings screen gt 32 the continuous lighting of at least 4 Reception indicators is the target for a stable connection If 3 or fewer indicators are lit or the connection is being interrupted change the position or angle of your wireless router and see if the connection state improves If there is no improvement connect to a wired netw
45. gt Anincorrect resolution is selected in HDMI Resolution Reset the setting as follows D Turn the unit on Press and hold OK the blue button and the yellow button on the remote control at the same time for more than 5 seconds OORET is displayed on the unit s display Press gt right repeatedly on the remote control until 04PRG is displayed on the unit s display Press and hold OK for more than 5 seconds Set the item again c 29 When Dolby Digital Plus Dolby TrueHD and DTS HD audio are not output properly select Yes in Restore Default Settings and make proper settings gt 34 gt When 3D BD Video Playback in the Setup menu is set to Auto images may not be output depending on the connection method After removing the disc from this unit select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs 3 31 gt BDT330 When outputting in 24p 4K images may be distorted depending on the HDMI cable Use an HDMI cable that supports 4K output 36 varavz6 Video is not output BDT330 gt Video from the HDMI AV OUT SUB terminal is not output when the HDMI SUB Output Mode is set to V OFF gt 30 Video is not output in high definition Confirm that HDMI Resolution in the Setup menu is set properly gt 29 3D video is not output gt Co
46. he front panel 11 10 98 7 6 54 Standby on switch 0 1 2 14 8 V OFF LED Video off LED Press to switch the unit from on to standby It is possible to set the LED to turn on off mode or vice versa In standby mode the unit gt 34 still consumes a small amount of power 9 SD card slot gt 17 Open or close the disc tray gt 17 10 Remote control signal sensor Blue LED Distance Within approx 7 m 23 feet It is possible to set the LED to turn on off Angle Approx 20 up and down 30 left and gt 34 right Start play gt 20 11 Disc tray gt 17 Stop gt 20 y Display Rear panel terminals gt 10 13 USB port 3 17 BDT230 1 PAY 4 3 2 1 Pull to flip down A pt the front panel 2 E gt en V lm x Epp 9 8 7 6 5 Standby on switch 0 1 gt 14 7 SD card slot gt 17 Press to switch the unit from on to standby 8 Remote control signal sensor mode or vice versa In standby mode the unit Distance Within approx 7 m 23 feet still consumes a small amount of power Angle Approx 20 up and down 30 left and Start play gt 20 right Stop 20 9 Disctray gt 17 Open or close the disc tray gt 17 Display Rear panel terminals gt 10 13 USB port 3 17 vatrave 9 Connecting to a TV
47. he instructions for the connected equipment CAUTION Do not place objects in front of the unit The disc tray may collide with objects when it is opened and this may cause malfunction varav e 17 Connections amp Settings Playback HOME menu Major functions of this unit can be operated from the HOME menu Preparation Turn on the TV and select the appropriate video input on the TV 1 Press 05 to turn on the unit e After network service introduction banner is shown the HOME menu is displayed When connected to the network the banner content may be changed You can disable the Start up Banner gt 34 2 Press OK or A V 4 P to select the item e f there are any other items repeat this step HOME s 2 Blu ray Disc Player Network FEY ras ll dd Photos Setup Music Videos e Personae OB E Ei tstuser 18 varavee Videos Photos Music Disc Play back the contents gt 20 e When multiple contents are USB recorded select the types of contents or the title SD Card Network Network Displays the Home screen of Service VIERA Connect gt 23 DLNA Client gt 24 Home A Network Miracast gt 24 Media Renderer 25 Setup Player Settings gt 29 USB Management gt 22 Changes the background of Wallpaper OME menu To show the HOME menu Press HOM
48. he other equipment must also be 1080p compatible gt 24p 4K 24p Output BDT330 This setting is for selecting the output method for content recorded in 24p such as movies Outputs signals by upconverting 24p 4K them to 4K 24p Outputs in 24 e Connect the compatible TV for each 4K or 1080 24p output to the HDMI AV OUT MAIN terminal of this unit e 24p 4K works only when playing back in 2D e When playing DVD Video set this setting to 24p 4K or 24p and then 24p in Video Settings gt 28 to On e When BD Video DVD Video images other than 24p are played images are output at 60p Continued on the next page vatavz6 29 Settings gt 24p Output BDT230 When this unit is connected to a TV supporting 1080 24p output movies and other material recorded at 24p are output at 24p e When playing DVD Video set to On and then set 24p in Video Settings gt 28 to On e When BD Video DVD Video images other than 24p are played images are output at 60p gt HDMI Color Mode This setting is for selecting color space conversion of the image signal gt Deep Color Output This setting is for selecting whether to use Deep Color output when a TV that supports Deep Color is connected gt Contents Type Flag Depending on the playback content the TV will output adjusting to the optimal me
49. hone etc e Playlist of Windows Media Player can play back only the contents that are stored in the libraries Press HOME Select Network Select Home Network Select DLNA Client e The list can be updated by pressing the red button on the remote control e The connection method can be switched to Wi Fi Direct by pressing the green button on the remote control kOND al Select the equipment and press OK o Select the item to play and press OK You may be able to use convenient functions depending on the content by pressing OPTION Control Panel is e g displayed once the EN playback starts lt lt 8 OD ES Press OK if the EH E A Control Panel is not EN displayed and press RETURN to hide the Control Panel To exit from Home Network Press HOME Using the Digital Media Controller You can use a smartphone or tablet as the Digital Media Controller DMC to play back contents from DLNA server on the Renderer this unit Possible applications t Dd CServer Controller Renderer DMC compatible software should be installed Preparation Perform steps to gt 24 Perform the Remote Device Settings gt 32 You can register up to 16 devices Press HOME Select Network Select Home Network Select Media Renderer Oa ON Select Home Network or Wi Fi Direct and press
50. horized Microsoft subsidiary and third parties 2 MS PlayReady Final Product Labeling This product contains technology subject to certain intellectual property rights of Microsoft Use or distribution of this technology outside of this product is prohibited without the appropriate license s from Microsoft 3 MS PlayReady End User Notices Content owners use Microsoft PlayReady content access technology to protect their intellectual property including copyrighted content This device uses PlayReady technology to access PlayReady protected content and or WMDRM protected content If the device fails to properly enforce restrictions on content usage content owners may require Microsoft to revoke the device s ability to consume Play Ready protected content Revocation should not affect unprotected content or content protected by other content access technologies Content owners may require you to upgrade PlayReady to access their content If you decline an upgrade you will not be able to access content that requires the upgrade 4 FLAC WPA Supplicant The software licenses are displayed when License in the Setup menu is selected gt 34 Copyright 2004 2010 Verance Corporation Cinavia M is a Verance Corporation trademark Protected by U S Patent 7 369 677 and worldwide patents issued and pending under license from Verance Corporation All rights reserved 44 varavee Limited Warranty ONLY FOR U S A
51. is unit via HDMI AV OUT terminal and this unit is also connected to other devices such as an amplifier receiver via an OPTICAL terminal E PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the OPTICAL e f On is selected the signals that are converted to 48 kHz are output e f Off is selected and the connected equipment does not support 96 kHz the sound will not be output normally e Signals are converted to 48 kHz despite the settings in the following cases when the signals have a sampling frequency of 192 kHz when the disc has copy protection when BD Video Secondary Audio is set to On E Downmix Select the downmix system of multi channel to 2 channel sound e Select Surround encoded when the connected equipment supports the virtual surround function e The downmix effect is not available when Digital Audio Output is set to Bitstream e The audio will be output in Stereo in the following cases AVCHD playback Playback of secondary audio including the button click sound B DTS Neo 6 2ch 2 1ch audio is expanded to 7ch 7 1ch before it is output Audio expansion is enabled in the following cases When you have selected PCM in Digital Audio Output When outputting audio by using an HDMI cable 3 W 3D BD Video Playback Select the playback method of
52. ixed Data Disc Option Select the playback contents on discs with both data files and Video e If MP3 JPEG MKV is selected the video menu function except MKV cannot be B Remote Control Code Change the remote control code if other Panasonic products react to this remote control E Firmware Update gt 16 Press OK to show the following settings Automatic Update Check When this equipment remains connected to the Internet it will check for the latest firmware version when it is turned on and you can update it if necessary Update Now You can update the firmware manually if a played back firmware update is available e If BDAV AVCHD is selected data file cannot be played back E System Information Press OK to show the following settings Front Panel Display Changes the brightness of the unit s display License e f Auto is selected the display is set to bright Information about the software used by this unit and only dimmed during playback is displayed Blue LED BDT330 Firmware Version Information Set whether to light the blue LED in the center Display firmware version of this unit and of this unit when turned ON wireless LAN module gt HDMI SUB V OFF LED Control BDT330 BW Restore Default Settings Set to light the HDMI SUB V OFF LED or not This returns all values in the Setup menu and the e This will light when H
53. le Inc A e a FI amp Java CERTIFIED Kim This produ 1 ct incorporates the following software he software developed independently by or for Panasonic Corporation he so 2 3 Version ware owned by third party and licensed to Panasonic Corporation he software icensed under the GNU General Public License 2 0 GPL V2 0 4 the so ware licensed under the GNU LESSER General Public License Version 2 1 LGPL V2 1 and or 5 open source software other than the software licensed under he GP L V2 0 and or LGPL V2 1 The software categorized as 3 5 are distributed in the hope tha it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PA terms and RTICULAR PURPOSE Please refer to the detailed conditions thereof shown in the Player Settings menu At least three 3 years from delivery of this product Panasonic will give to any third party who contacts us at the contact information provided b elow for a charge no more than our cost of physically performing source code distribution a complete machine readable copy of the corresponding source code covered under GPL V2 0 LGPL V2 1 or the other licenses with the obligation to do so as well as the respective copyright notice thereof Contact Information oss cd request 2gg jp panasonic com The source code and the copyright notice are
54. lustration purposes contents may change without notice Preparation e Network connection 13 e Network setting gt 14 1 Press INTERNET e Netflix can be accessed directly by pressing NETFLIX button 2 Select the item and press OK To exit from VIERA Connect Press HOME LL When playing content in the media VIERA Connect cannot be accessed by pressing INTERNET e In the following cases settings are possible using the Setup menu items When restricting the use of VIERA Connect gt 33 Network Service Lock When correcting the displayed time 32 Time Zone DST e f using slow Internet connection the video may not be displayed correctly A high speed Internet service with a Speed of at least 6 Mbps is recommended Be sure to update the firmware when a firmware update notice is displayed on the screen If the firmware is not updated you may not be able to use VIERA Connect function properly 3 16 e VIERA Connect Home screen is subject to change without notice e The services through VIERA Connect are operated by their respective service providers and service may be discontinued either temporarily or permanently without notice Therefore Panasonic will make no warranty for the content or the continuity of the services e Some features of websites or content of the service may not be available e Some content may be inappropriate for some viewers e Some content may only
55. mum possible Contal Video Audio Example of number of output channels when connected to amplifier ontainer A 3 receiver compatible with the respective audio format codec codec ile extension AVCHD H 264 Dolby Digital mts T Digital Audio Output MP4 H 264 AAC mp4 Bitstream PCM PS MPEG2 Dolby Digital mpg BD Video Linear PCM mpeg HDMI AV Outputs using 7 1ch PCM 123 TS MPEG2 AAC m2ts Output OUT original audio DVD Video H 264 Dolby Digital ts 5 1ch PCM3 channel Dolby Digital bown mixed Photo OPTICAL BTS pha 2ch PCM Format Example of file extension JPEG jpg When BD Video Secondary Audio is set to On the audio will be output as Dolby Digital DTS Digital Surround Audio or 5 1ch PCM 5 T 2 The maximum possible number of Dolby sound is Audio codec Exumplogudioxonston 5 1ch PCM MP3 mp3 3 When DTS Neo 6 is set to Cinema or Music 2ch FLAC flac 2 1ch audio can be expanded to 7ch 7 1ch and output AAC m a WMA wma Linear PCM varavze 41 Reference l Display languages list li Language code list Display Language Display Language Display Language Language CodeffLanguage CodeffLanguage Code ENG English JPN Japanese ARA Arabic Abkhazian 6566 Gujarati 7185 Rhaeto Romance FRA French CHI Chinese HIN Hindi Afar 6565 Hausa 7265 8277 DEU German KOR Korean PER Persian Afrikaans 6570 Hebrew 7387 Romanian 8279 ITA Italian MAL Malay IND Indo
56. n be updated 16 e You can enjoy BD Live gt 22 e You can enjoy VIERA Connect 2 23 e You can access other devices Home Network gt 24 e This unit supports Wi Fi Direct and can make a wireless connection to wireless devices without router You can use this function when enjoying Home Network feature etc Internet access is not available while connected via Wi Fi Direct gt 24 32 For details about connection method refer to the instructions supplied with the connected equipment Wireless LAN connection This unit has built in Wi Fi and can be connected to a wireless router SS Cy Wireless router etc Internet e For up to date compatibility information on your wireless router refer to http panasonic jp support global cs This site is in English only For additional information about this unit refer to http www panasonic com help For U S A e The unit is not compatible with public wireless LAN services provided in airports stations cafes etc e See page 3 for the precautions for wireless LAN connection LAN cable connection BDT330 LAN Cable Broadband router etc intetnet BDT230 e Use category 5 or above straight LAN cables STP when connecting to peripheral devices e Inserting any cable other than a LAN cable in the LAN port can damage the unit vatavzs 13 Connections amp Settings Settings Easy Settings
57. nesian Albanian 8381 Hindi 7273 Russian 8285 ESP Spanish VIE Vietnamese MRI Maori Amharic 6577 Hungarian 7285 Samoan 8377 NLD Dutch THA Thai BUL Bulgarian Arabic 6582 Icelandic 7383 Sanskrit 8365 SVE Swedish POL Polish RUM Romanian Armenian 7289 Indonesian 7378 Scots Gaelic 7168 NOR Norwegian CES Czech GRE Greek Assamese 6583 Interlingua 7365 Serbian 8382 DAN Danish SLK Slovak TUR Turkish Aymara 6589 Irish 7165 Serbo Croatian 8372 POR Portuguese HUN Hungarian Others Azerbaijani 6590 Italian 7384 Shona 8378 RUS Russian FIN Finnish Bashkir 6665 Japanese 7465 Sindhi 8368 Basque 6985 Javanese 7487 Singhalese 8373 Bengali Bangla Kannada 7578 Slovak 8375 6678 Kashmiri 7583 Slovenian 8376 Bhutani 6890 Kazakh 7575 Somali 8379 Bihari 6672 Kirghiz 7589 Spanish 6983 Breton 6682 Korean 7579 Sundanese 8385 Bulgarian 6671 Kurdish 7585 Swahili 8387 Burmese 7789 Laotian 7679 Swedish 8386 Byelorussian 6669 Latin 7665 Tagalog 8476 Cambodian 7577 Latvian Lettish 7686 Tajik 8471 Catalan 6765 Lingala 7678 Tamil 8465 Chinese 9072 Lithuanian 7684 Tatar 8484 Corsican 6779 Macedonian 7775 Telugu 8469 Croatian 7282 Malagasy 7771 Thai 8472 Czech 6783 Malay 7783 Tibetan 6679 Danish 6865 Malayalam 7776 Tigrinya 8473 Dutch 7876 Maltese 7784 Tonga 8479 English 6978 Maori 7773 Turkish 8482 Esperanto 6979 Marathi
58. nnect to a full high definition TV gt Is there a non 3D compatible amplifier receiver connected between this unit and a TV gt 11 gt BDT330 If there is a non 3D compatible amplifier receiver connected to the HDMI AV OUT SUB terminal set the HDMI SUB Output Mode to V OFF 2 11 gt Are the settings on this unit and the TV correct 3 21 gt Is the amplifier receiver that is connected between this unit and TV on Depending on the connected TV the video being played back might switch to 2D video due to changes in resolution etc Check the 3D setting on the TV 3D video is not output correctly as 2D gt Select Set before play in the Setup menu and select 2D Playback in the setup screen displayed when playing 3D discs gt 31 3D BD Video Playback gt Discs that have recorded titles with Side by side 2 screen structure and that can be enjoyed in 3D are played back in accordance with the settings of the TV No subtitles When progressive output is on closed captions subtitles cannot be displayed The subtitles overlap closed captions recorded on discs gt Turn off the subtitles or the closed caption setting on the TV gt 27 A black band is displayed around the edge of the screen The aspect ratio of the screen is abnormal gt Confirm the TV Aspect is set properly gt 33 gt Adjust the aspect setting on the TV Audi
59. o Cannot switch audio The audio cannot switch if Digital Audio Output is set to Bitstream Set Digital Audio Output to PCM 3 30 Cannot hear the desired audio type Check the connections and the Digital Audio Output settings gt 11 30 gt BDT330 When connecting this unit to a TV via an HDMI AV OUT MAIN and to an amplifier receiver via an HDMI AV OUT SUB set HDMI SUB Output Mode to V OFF gt 11 gt To output audio from a device connected with an HDMI cable set HDMI Audio Output to On in the Setup menu gt 30 There is no sound coming out from the TV gt Audio may not output from the TV when the amplifier receiver is connected to the HDMI AV OUT SUB and HDMI SUB Output Mode 30 is set to V OFF In such a case output audio from the amplifier receiver To output audio from the TV set the HDMI SUB Output Mode to Normal Playback Disc cannot be played gt The disc is dirty gt 5 gt The disc is not finalized gt 7 Still pictures JPEG do not play back normally gt The images that were edited on the PC such as Progressive JPEG etc may not be played back I can t play back BD Live gt Confirm that this unit is connected to the broadband Internet gt 13 gt Connect this unit to the network by a wired connection gt Confirm the BD Live Internet Access s
60. o not bend or subject this unit to strong impacts Keep this unit away from moisture Do not disassemble or alter this unit in any way Restriction on use of unauthorized copied content This unit adopts the following technology for copyright protection Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commercially produced film and videos and their soundtracks When a prohibited use of an unauthorized copy is detected a message will be displayed and playback or copying will be interrupted More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http www cinavia com To request additional information about Cinavia by mail send a postcard with your mailing address to Cinavia Consumer Information Center P O Box 86851 San Diego CA 92138 USA To dispose or transfer this unit The unit may keep the user settings information in the unit If you discard this unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings gt 35 To return all settings to the factory preset e The operation history may be recorded in the memory of this unit CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM FDA 21CFR CLASS T IIa CAUTION CLASS 2 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO THE
61. of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than an Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
62. ories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel AC power supply cord e The power plug is the disconnecting device Install this unit so that the power plug can be unplugged from the socket outlet immediately Small object e Keep the Memory Card out of reach of children to prevent swallowing caution Unit e This unit utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Do not place sources of naked flames such as lighted candles on this unit Placement To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcase built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items Do not place the unit on amplifiers receivers or equipment that may become hot The heat can damage the unit Batteries Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e When disposing the batteries please contact your local authorities or dealer and ask for the correct method of disposal Do not mix old and
63. ork and perform the Easy Network Setting gt 14 again varav e 37 Reference Messages Check the following when messages or service numbers are displayed on the screen or unit s display on the rv Cannot play gt You inserted an incompatible disc Discs recorded in PAL video etc Cannot display on this unit gt You tried to play a non compatible image gt Confirm SD on the unit s display is not displayed and re insert the card No disc inserted gt The disc may be upside down O This operation is not available gt Some operations are unsupported by the unit For example reverse slow motion etc IP address is not set gt The IP Address in IP Address DNS Settings is Set the IP Address Subnet Mask and Default Gateway Select the automatic address acquisition if necessary The current wireless network security setting is weak It is recommended to change to a stronger security setting gt Seta stronger network security level referring to the wireless router operating instructions 38 voravz6 On the unit s display NET While connecting to a network No PLAY There is a viewing restriction on a BD Video or DVD Video gt 33 The mediais dirty or badly scratched The unit cannot play REMOVE The USB device is drawing too much power Remove the USB device
64. pment and select this unit s input channel on the connected TV so that the HDMI CEC function works properly Repeat this procedure when the connections or settings are changed Automatic input switching Power on link When play starts on the unit the TV will automatically switch the input channel and the screen of this unit will be displayed Additionally when the TV is off the TV will automatically turn on e BDT330 When HDMI SUB Output Mode gt 30 is set to Normal and the power of the device connected to the HDMI AV OUT SUB is turned on the Power on link to the device connected to the HDMI AV OUT MAIN will not work 26 VQT4V26 Power off link All connected equipment compatible with HDMI CEC including this unit automatically turns off when you switch the TV off La Operation cannot be guaranteed on all HDMI CEC devices Option menu A variety of playback operations and settings can be performed from this menu Available options differ depending on the playing contents and the condition of the unit About Multi User Mode Settings of the items with this indication are saved by the respective users registered in the HOME menu Please refer to page 19 for details about user registration and switching 1 Press OPTION e When playing music select Playback Settings and press OK e g BD Video a Soundtrack Leo Subiti s m E Kb
65. raised to make dialog easier to hear e This function is effective for audio from the HDMI terminal or the OPTICAL terminal only when Digital Audio Output is set to PCM gt 30 However in this case audio is output as 2ch from the OPTICAL terminal 3D Settings Signal Format Original Keep original picture format E Menu m a 3D picture format comprising of Display Men Siel by sikte left jr right screens 2D to 3D Converts 2D pictures to 3D 3 m effect Video Settings E Distance E Picture Mode Select the picture quality mode during play e f you select User you can change settings in Picture Adjustment W Picture Adjustment 3 Specific picture quality settings can be changed E Progressive Select the method of conversion for progressive output to suit the type of material being played e When the content is distorted change the settings from Auto to Video E 24p Movies and other material recorded on DVD Video at 24p are output at 24p This works only in the following cases BDT330 24p 4K 24p Output is set to 24p 4K or 24p gt 29 BDT230 24p Output is set to On gt 30 E Reset to Default Video Settings Return video settings to the factory preset 28 VQT4V26 Set the amount of depth perception E Pop Out Level 3D position for the Option menu or message S
66. system NTSC This pu i ID3 a a tags but only titles artist Operating 5 C to 35 C MeS MP3 mp3 names and album names temperature range 41 F to 95 F can be displayed Operating humidity 10 to 80 RH e MOTION JPEG and range no condensation Progressive JPEG are not supported Digital audio output Optical digital output e You ina not be able to Optical terminal JPEG JPG jpg play back the file if you Output connector have edited the folder HDMI AV output BDT330 Type A 19 pin 2 system anice arine nd BDT230 Type A 19 pin 1 system device SD card slot 1 system MKV mkv e The video file and subtitles text file are USB slot PR inside the same folder Syston ida and the file names are Em 10BASE T 100BASE TX geo the same except for the ernet 1 system MKV Me OOO file extensions SAT et e Some MKV files may Standard Compliance SSA ssa not play back IEEE802 11 a b g n ASS ass depending on the video Frequency range resolution and frame 2 4 GHz 5 GHz band desl ula Wireless LAN Maximum sampling rate ity FLAC FLAC flac mpg fate Security d 192 kHz 24 bit WPA WPA2 Encryption Type TKIP AES WAV WAV way Maximum sampling rate Authentication Type PSK 192 kHz 24 bit WEP 64 bit 128 bit MPO MPO mpo 3D still picture Class I LASER Product This unit supports ID3 Wave length 785 nm CDs AAC M4A
67. t attach labels or stickers to discs e Do not use disc cleaning sprays benzine thinner static electricity prevention liquids or any other solvent Clean any dust water or foreign matter from the terminals on the rear side of the card e Do not use the following discs Discs with exposed adhesive from removed Stickers or labels rented discs etc Discs that are badly warped or cracked Irregularly shaped discs such as heart shapes vatrave 5 Getting started Connections amp Settings Settings Playback Reference Playable media Media Device markings Device types Contents format BD Video Video EN E BD RE Video JPEG MPO Blu ray Disc BD R Video MKV DVD Video Video VIDEO De DVD R R R4 7 Video AVCHD MKV JPEG MPO AAC DVD DVD FLAC MP3 WAV WMA RC DVD R DL RDL DVD DVD RW RW R RW R DL Video AVCHD COMPACT Music CD Music CD DA MKV JPEG MPO E CD R AAC FLAC MP3 CD RW Music CD DA WAV WMA SD Memory Card from 8 MB to 2 GB EJ DP SDHC Memory Card from 4 GB to 32 GB AVCHD AVCHD 3D x lt C SDXC Memory Card 48 GB 64 GB MP4 JPEG MPO Compatible with both mini and micro types USB z USB devices up to 2 TB e See pages 7 and 40 for more information on the types of content that can be played MKV MP4 MPEG2 JPEG MPO AAC FLAC MP3 WAV WMA 6 vatave6 B Discs that cannot
68. thod when a TV that supports this function is connected gt HDMI SUB Output Mode BDT330 Set to output the video from the HDMI AV OUT SUB terminal or not A progressive image recorded at a rate of 24 frames per second motion picture film Many BD Video movie contents are recorded in 24 frames second in accordance with the film materials A high resolution image display technology of approximately 4000 width X 2000 height pixels N 30 varavee Audio E Dialog Enhancer 4 gt 28 B Dynamic Range Compression You can listen at low volumes but still hear dialog clearly Dolby Digital Dolby Digital Plus and Dolby TrueHD only e Auto is effective only when playing Dolby TrueHD B Digital Audio Output Press OK to show the following settings gt Dolby D Dolby D Dolby TrueHD DTS DTS HD Select the audio signal to output e Select PCM when the connected equipment cannot decode the respective audio format This unit decodes the audio format and transmits to the connected equipment e Not making the proper settings may result in noise BD Video Secondary Audio Select whether or not to mix the primary and secondary audio including the button click sound If Off is selected the unit outputs the primary audio only gt HDMI Audio Output This setting selects whether or not to output audio from HDMI e Select Off when the TV is connected to th
69. ur request by E mail to npcparts us panasonic com ou may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9am 9pm EST Panasonic National Parts Center 20421 84th Ave S Kent WA 98032 We accept Visa MasterCard Discover Card American Express For hearing or speech impaired TTY users TTY 1 866 605 1277 As of October 2012 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER 45 VQT4V26 Reference Limited Warranty Only for CANADA Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario LAW 2T3 PANASONIC PRODUCT LIMITED WARRANTY Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic Canada Inc Technics Audio Product One 1 year parts and labour Panasonic BD DVD Product One 1 year parts and labour Panasonic Audio Receivers One 1 year parts and labour Home Theater Systems Product One 1 year parts and labour This warranty is given only to the original purchaser or the person for whom it was purchased as a gift
70. users of the 5 25 to 5 35 GHz and 5 65 to 5 85 GHz bands These radar stations can cause interference with and or damage this product This equipment complies with FCC IC radiation exposure limits set orth for an uncontrolled environment and meets the FCC radio requency RF Exposure Guidelines in Supplement C to OET65 and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping he radiator at least 20cm 7 7 s or more away from person s body excluding extremities hands wrists feet and ankles THE FOLLOWING APPLIES ONLY IN THE U S A FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to
71. video and photos Preparation Connect this unit to a 3D compatible TV 3 10 11 e Perform the necessary preparations for the TV e Play back following the instructions displayed on the screen e 3D Settings gt 28 31 La Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue In the event that you experience dizziness nausea or other discomfort while viewing 3D images discontinue use and rest your eyes 3D video might not output the way it is set in HDMI Resolution and 24p 4K 24p Output BDT330 24p Output BDT230 2 29 30 When playing back 3D photos from Photos screen select from the SD list Still pictures in 2D are played back in 2D If 2D and 3D indications are not displayed press the red button on the remote control to switch the view of playback contents varaves 21 Playback Enjoying BD Live With BD Live discs you can enjoy bonus contents that use Internet access For this BD Live function connection of a USB device is necessary along with Internet connection 1 Perform network connection and settings gt 13 14 2 Connect a USB device with 1 GB or more free space e The USB device is used as the local storage 3 Insert the disc B Deleting data on the USB device Select USB Management in the HOME menu gt 18 then select BD Video Data Erase and press OK
72. with DLNA such as the Windows XP operating system and play back video still pictures and music on this unit For the setting and operation method of connected equipment refer to the following website http panasonic jp support global cs This site is in English only gt Remote Device Settings gt 25 Press OK to show the following settings Remote Device Operation Enable to operate by DMC e f On is selected Quick Start will be activated Setting Unit Name Set the name of this unit to be displayed on the connected equipment Registration Type Allow connection to all the Auto equipment accessing this unit Set the permission for Manual individual equipment connections accessing this unit Remote Device List Registering deregistering of the displayed equipment can be performed when Manual in Registration Type is selected gt BD Live Internet Access gt 22 You can restrict Internet access when BD Live functions are used e f Allow Limited is selected Internet access is permitted only for BD Live contents which have content owner certificates Ratings The following items use the same password Don t forget your password B DVD Video Ratings Set a ratings level to limit DVD Video play E BD Video Ratings Set an age limit of BD Video play W Network Service Lock You can restrict the usage of VIERA Conne
73. y function does not work Pause Press HPAUSE e Press IMPAUSE again or BP PLAY to restart play Search Slow motion Search While playing press SEARCH 44 or SEARCHP gt Slow motion While paused press SEARCHP gt The speed increases up to 5 steps e Music MP3 etc The speed is fixed to a single step e Press B PLAY to revert to normal playback speed Skip While playing or paused press 144 or gt gt Skip to the title chapter or track Frame by frame While paused press gt HI e Press and hold to change in succession forward e Press PLAY to revert to normal playback speed Changing audio Press AUDIO You can change the audio channel number or soundtrack language etc Displaying menus and playback information Show top menu pop up menu Press POP UP MENU TOP MENU e Select the item and press OK Show the status messages While playing press STATUS The status messages give you information about what is currently being played Each time you press STATUS the display information may change or will disappear from the screen e Depending on media and contents the display may change or may not appear e g BD Video Q e mTi Ci 0 05 14 es O QO T Title C Chapter PL Playlist O Elapsed time in the title Q Current position O Total time e g JPEG Date 11 12 2007 Size 500 x 375 Manufacturer Equipment Enjoying 3D

Panasonic DMP-BDT330

Contents

Download Pdf Manuals

Related Search

Related Contents