Philips 52HFL5581V 52" Black
Contents
1. 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt CHANNEL DISPLAY 3 Press gt to select one of the following e NUMBER To display the channel number on the screen e LABEL To display the channel name on the screen e ALL To display channel number name and logo on the screen e NONE To prevent the display of channel information Select the switch on power mode 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt POWER ON 3 Press B to select the power mode that will be restored after an AC power interruption e LAST STATUS When AC power is restored this will return the TV to the same power status that it was in when AC power was removed e ON When AC power is restored the TV will always come up in the on state The button on the TV and the guest remote control are enabled e STANDBY When AC power is restored the TV will always come up in the Standby state e FORCED ON When AC power is restored the TV will always come up in the on state The button on the TV and the guest remote control are disabled The TV cannot be turned off Configure the picture and sound settings 1 Enter the Philips Hospitality setup menu Press AV to select CONFIGURATION gt PICTURE SOUND D PHILIPS PICTURE SOUND BRIGHTNESS COLOR CONTRAST SHARPNESS TINT ACTIVE CONTROL TREBLE BASS BALANCE AVL Press AV to se2. 2 Press AVP to select CHANNEL INSTALL gt CHANNEL 3 Press 0 9 Numeric buttons to enter a program number e For cable mode select a number between 01 250 For antenna mode select a number between 02 250 Note e o select a three digit program number configure the TV using the control options EN 11 English Select a source of input 1 Enter the Philips Hospitality setup menu 2 Press AV to select CHANNEL INSTALL gt INPUT 3 Press to select a source of input Note e External inputs can also be assigned to a program number Select a logo for a channel Enter the Philips Hospitality setup menu Press AV to select CHANNEL INSTALL gt CHANNEL LOGO Press to enter a page containing logos Press AV to select a logo for the channel UT A WN Press 0 to save the logo and exit the menu Map to a digital channel 1 Enter the Philips Hospitality setup menu 2 Press AVA to select CHANNEL INSTALL gt DIGITAL Press gt to select YES D PHILIPS CHANNEL INSTALL DIGITAL ws 4 Press Y to select DIGITAL CH SCROLL L gt Digital channel scroll works only for digital channels that have already been installed ie by Automatic channel install see section 8 5 Press lt P to toggle between the available digital channels E e Select CHANNEL INSTALL gt DIGITAL gt NO if the channel is an analog channel e DIGITAL CH SCROLL DIGITAL MAJOR CH and
3. Portions of this software are copyright The Free Type Project www freetype org OSS declaration Open source software This television contains open source software Philips BU Hospitality hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code on a medium customarily used for software interchange To obtain the source code write to Philips Singapore Pte Ltd Philips BU Hospitality Software Development Manager 620A Lorong 1 Toa Payoh Singapore 319762 This offer is valid for three years after the date of purchase of this product EN 3 English 2 Important Registering your model with Philips makes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once or register online at www philips com welcome to ensure e Proof of Purchase Returning the enclosed card guarantees that your date of purchase Is on file so no additional paperwork is required from you to obtain warranty service e Product Safety Notification By registering your product you receive notification directly from the manufacturer in the rare case of a product recall or safety defect e Additional Benefits of Product Ownership Product information This TV consumes minimal energy in standby mode to minimize
4. on page 16 English For software update cloning and media player If LOW POWER STANDBY is set to YES the TV can only be switched on Q N with a remote control Please ensure the remote control is always available Stereo audio output to headphones or earphones ih control buttons at the side ofthe TV will not be able to switch on the AUDIO L R Audio input from analog devices connected to VIDEO e Ensure that the TV is connected to the AC mains power outlet If rt VIDEO does not power on pull the plug out of the power outlet wait for 60 seconds and turn on the TV again Composite video input from analog devices such as VCRs The TV turns off by itself S VIDEO S Video side to be used with Audio L R connectors for camcorder game console etc When you use the S Video side for video signals do not use the Composite video side input for video signals oO 2 e EN 21 e Check the ESP setting and increase the time if you want the TV to 1 7 Stand assembly stay on for longer duration see Configure the control options on page 16 The TV cannot be turned off e Check if the power mode has been set to FORCED ON If it is change selection to any other setting No access to Philips Hospitality setup menu The Philips Hospitality setup mode cannot be accessed using the guest remote control e Check that the high security mode has been turned off Use the Philips Hospitality setup remote control t
5. DIGITAL MINOR CH do not apply to analog channels e When you select USE CHANNEL TABLE gt NO to use physical channel numbers instead of virtual channel numbers DIGITAL MAJOR CH is replaced by RFCHANNEL NUMBER and DIGITAL MINOR CH is replaced by MPEG PROGRAM NUMBER on your TV screen 12 EN D PHILIPS CHANNEL INSTALL DIGITAL VES Assign digital major and minor channels Enter the Philips Hospitality setup menu Press AVS to select CHANNEL INSTALL gt DIGITAL gt YES Press Y to select DIGITAL MAJOR CHANNEL RF CHANNEL NUMBER Press 0 9 Numeric buttons to enter a channel number between 1 and 999 Press Y to select DIGITAL MINOR CHANNEL MPEG PROGRAM NUMBER Press 0 9 Numeric buttons to enter a channel number between 0 and 32768 Oo Un hh WN Select a preferred list of channels 1 Enter the Philips Hospitality setup menu 2 Press AVP to select CHANNEL INSTALL gt RINGS 3 Press gt to select a ring number L gt A flashing red dash appears next to the selected ring D PHILIPS CHANNEL INSTALL 4 Press AY to select or deselect a list L gt The selected list is marked by an X D PHILIPS 1X 2 3 4 RINGS CHANNEL RINGS 5 Press AV to save or remove a channel from the ring L gt The ring is marked by an gt when the channel is saved in it 6 Press AY to selecta category option HIGH DEFINITION SPORTS NEWS etc to save the channel Press lt P to select YES t
6. and video input from high definition digital devices such as Blu ray players SERVICE For serial communication and use by service personnel VGA Video input from a computer SPDIF OUT Digital audio output to home theaters and other digital audio systems AV 1 Analog audio and video input from analog or digital devices such as DVD players satellite receivers and VCRs DATA 1 SPI SmartPort interface ee Pay Per View terminal connection 1 6 Troubleshooting Side connectors This section describes commonly encountered issues and accompanying solutions TV power on off issues The TV does not power on e Ensure that the TV is connected to the AC mains power outlet If it does not power on pull the plug out of the power outlet wait for 60 seconds plug it back and turn the TV on again The TV does not switch on e Check that the TV controls are not locked Use Philips Hospitality setup remote control to access the Philips Hospitality setup menu and select CONFIGURATION gt SECURITY gt KEYBOARDLOCK gt NO to unlock all TV control keys see Enable or disable the TV controls on page 16 e Check that the remote control is not locked Use Philips Hospitality setup remote control to access the Philips Hospitality setup menu and select CONFIGURATION gt SECURITY gt REMOTE CONTROL gt LOCK gt YES to enable the guest remote control see Enable or disable the remote control
7. buttons will not function in the default settings To enable these buttons refer to section on LOW POWER STANDBY see Configure the SmartFeatures on page 17 EN English The guest remote control optional O OQ OOO ON CC SMART SOUND SY VOY SS PHILIPS Standby On Switches the product on or off The product is not powered off completely unless it is physically unplugged CH GUIDE Accesses SmartGuide see Configure the control options on page 16 and or list of channels PLAY Starts or resumes play AREN Searches backward gt gt FF Searches forward SMART PICTURE Launches the picture menu SLEEP Sets a delay after which the TV switches to standby OK Confirms an entry or selection Navigation buttons Navigates menus CH Switches to the next or previous channel K Mutes or restores volume 0 9 Numeric buttons EN Q Selects a channel or setting FORMAT Selects a picture format A CH Toggles between the current channel and the last viewed channel VOL Increases or decreases volume MENU Toggles the main menu on or off SMART SOUND Launches the sound menu E STOP Stops playback I PAUSE Pauses play CC Displays closed captions settings SOURCE Selects connected devices This remote control is a unified DVD remote control not a universal remote control a
8. environmental impact The active power consumption is given on the type plate at the back of the TV The model and serial number of your TV can be found on the TV as well as on the packaging Safety Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Never insert objects into the ventilation slots or other openings on the TV e When the TV is swiveled ensure that no strain Is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire e Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 55 lbs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight
9. indicator 15 Select channel display 15 Select the switch on power mode 15 Configure the picture and sound settings 15 12 Configure the security settings 16 Select the security level 16 Enable or disable the TV controls 16 13 14 15 16 17 Enable or disable the remote control Enable standalone mode Decryption control Configure the control options Configure different settings Configure the SmartFeatures Configure the V chip and closed caption settings Clone data TV Setup Data Download clone data from a USB device Download clone data from an RF channel Connect devices Back connectors Side connectors Troubleshooting TV power on off issues No access to Philips Hospitality setup menu Picture issues Stand assembly 16 16 16 17 17 12 20 20 20 21 2 21 2 22 22 22 23 EN English EN NW BR WN a 1 11 13 14 15 16 u gt oO IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of
10. to the USB root menu when a USB device is plugged in USB Break in allows guests to view jpg Images or listen to mp3 music files Select NO to disable automatic switchover e SMARTUPDATE Select YES to update information on a channel An option SMARTUPDATE CHANNEL will appear below on the screen to enable you to select a channel to update e SW DOWNLOAD To enable software download and cloning through a USB device or an RF channel Available only in certain models Select USB or RF as the source of software download Philips US PSG 1000 device supports streaming of software downloads and SmartClone update files E e If LOW POWER STANDBY is set to YES the TV can only be switched on with a remote control Please ensure the remote control is always available The control buttons at the side of the TV will not be able to switch on the TV e If LOW POWER STANDBY is set to YES the TV will be configured to the optimal energy saving mode whenever the TV is switched to standby mode As a result the TV will take a little longer to switch on again If you need a fast switch on time select NO SMARTSECURE is a feature in the new range of commercial TVs from Philips This feature requires a Philips Smart Gateway PSG as part of the installed system The PSG must be configured to broadcast a security key Then when SMARTSECURE is enabled in the TV the TV will not operate from a cold start unless it first sees this securit
11. C To use Multi RC See next section e SMART RC To access PayTV channels using Smoovie remote control OFF To turn offthe communication between the TV and the set top box 4 Press AV to select Store Note e For SP SPI and SP I2C connections if the set top box requires a source switch select DCM TYPE gt GENERIC Use Multi RC Multi RC enables control of multiple TVs in a room without any interference from each other s remote control To enable Multi RC each remote control is set to one of the four colors blue green yellow or red Each TV in the room is separately programmed to a remote control of one of those colors 10 EN In this way each TV responds to only one RC that is set to the same color as the TV itself This prevents interference from each others remote control when you watch multiple TVs in a room Note e Multi RC supports a maximum of four TVs in one room and requires the use of special remote controls For more details contact your local Philips hospitality representative Set the TV to a particular RC Press AV4D to select COMMUNICATION gt MULTI RC Press Y to select REMOTE COLOR Press B to toggle through the four colors and select one Press AVS to select STORE L gt The TV is configured to respond to the RC that is set to the same color LN 5 Press MENU and the color button same color as above on the guest RC simultaneously L gt The guest RC is set to t
12. Zon 56127 26 5561 VIA 32HFL5561D 27 SAFETA 32HFL5561V 2 32HFL4441 D 27 EPA E a Lo lee 3 HFL5581D 2 SFr DO Way 3 7HFLS5581V 27 ADAAFLS5811327 42HFL5581V 2 7 DZD 581527 52AFL5581W 27 EN User manual PHILIPS Contents 1 Notice 3 OSS declaration 3 2 Important A Product information 4 Safety 4 Screen care and sterilization 4 Environmental care 4 3 YourTV 5 Side controls and indicators 5 The guest remote control optional 6 The Philips Hospitality setup remote control not included in box E 4 Smartlnstall Software 8 5 TV setup access setup menu 8 6 Select a language 9 7 Select mode of communication 10 Select the communication protocol 10 Use Multi RC 10 8 Automatically install channels 11 Select a virtual or physical channel 11 Select a channel ring 11 9 Configure the channels 11 Select the mode for signal reception 11 Select a program 11 Select a source of input 12 Select a logo for a channel 12 Map to a digital channel 12 Assign digital major and minor channels 12 Select a preferred list of channels TZ Name a channel 13 Mute a channel 13 10 View signal strength or configure content ratings closed caption and emergency alerts 13 Setup digital channels 13 Configure closed caption text 13 Enable or disable emergency alert 14 11 Configure the switch on settings 1 Set the welcome message 14 Preset the picture format 15 Select the switch on channel 15 Select the switch on volume 15 Enable or disable the volume
13. able the TV ratings e D RATING To configure the downloadable RRT 5 rating 14 Clone data TV Setup Data 1 Enter the Philips Hospitality setup menu 2 Press AV to select SMARTCLONE gt SOURCE 3 Press gt to select one of the following options e USB To download clone data TV setup data from a USB device toa TV ora TV to a USB device e RF To download clone data TV setup data from an RF channel to a TV D PHILIPS SMARTCLONE SOURCE RF Download clone data from a USB device 1 Enter the Philips Hospitality setup menu 2 Press AV to select smartclone SOURCE Press P to select USB D PHILIPS SW DOWNLOAD SOURCE USB 4 Press AVP to select one of the following options e USB TO TV To download clone data TV setup data from a USB device to TV e TV TO USB To upload clone data TV setup data from a TV to a USB device Download clone data from an RF channel 1 Enter the Philips Hospitality setup menu Press AV to select smartclone SOURCE 3 Press P to select RF EN 19 English 20 D PHILIPS SW DOWNLOAD SOURCE RF Press AY to select one of the following options EN SOURCE Select RF as the source for software download DIRECTION Select RFTO TV to download the software from the RF channel CABLE TUNING Select YES PSG always uses cable tuning RF CHANNEL Set to the same channel as PSG 87 is the default for both Select another channel if channel 87 is already o
14. annel numbers channel numbers 1 99 for cable mode and 2 99 for antenna mode SOURCE MENU ITEM Select YES to allow the guest to select a source from the guest menu using the guest RC Otherwise select NO PIC FMT MENU ITEM Select YES to allow the guest to select a picture format from the guest menu using using the guest RC Otherwise select NO SMART WINDOW MENU ITEM Select YES to allow the guests to watch inputs from a PC and an RF channel simultaneously on a split screen Otherwise select NO SMART GUIDE Select YES to display the on screen channel guide The channel guide is not used with Pay Per View systems and should be set to NO MIN VOLUME Set the minimum volume MAX VOLUME Set the maximum volume LODGENET CARD Select YES to allow the use of Lodgenet Note e The SMART GUIDE will show only those programs that have been assigned to one or more categories 13 Configure different settings 1 Enter the Philips Hospitality setup menu Press AV to select CONFIGURATION D PHILIPS CONFIGURATION SWITCH ON OSD gt Press AV to select one of the available options to configure the settings SWITCH ON OSD To configure settings such as volume channel picture format power mode etc that are used as default when the TV is switched on PICTURE SOUND To configure picture and sound settings such as brightness color sharpness tint bass balance AVL etc SECURITY To set the level of
15. be copied from the TV e The STANDBY FIRMWARE is rarely updated and is not included when SW TYPE gt ALL is selected To update the STANDBY FIRMWARE the SW TYPE gt STANDBY FIRMWARE must be uniquely selected Configure the V chip and closed caption settings 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt CC V CHIP D PHILIPS CC V CHIP SAVE CC YES 3 Press AVP to select one of the following options e SAVE CC Select YES to use the last used CC mode Select NO to use the CC mode defined in the next option CC Select a CC mode that is used when the TV is turned on If you select CONFIGURATION gt CC V CHIP gt CC gt ON the following options appear e DIGITAL CC MODE Allows you to select your digital CC options Select an option from CS1 to CS6 If this option is not available for the current digital channel the TV will switch to ANALOG CC MODE e ANALOG CC MODE Allows you to set your analog CC options Select an option from CC1 to CC4 and TXT1 to TXTA e V CHIP MENU ITEM Select YES to allow the guest to change the V CHIP settings Otherwise select NO e SAVED V CHIP Select YES to save all the V chip settings Otherwise select NO e V CHIP SETUP Select one of the available options to change the V CHIP settings CLEAR ALL RATINGS To clear all the ratings e US MOVIE RATING To enable or disable the movie ratings e US TV RATING To enable or dis
16. ccupied RF TO TV Press P to start the download 15 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start E e Different types of connectors may be used to connect a device to your TV depending on availability and your needs A comprehensive interactive guide to help you connect your product is avallable at www connectivityguide philips com Back connectors TV Q DATA 1 00 O O AUDIO R CVI 80 q Pr Peo PENDANT RS 232 o DEA La AR Auplo R Audio our VGA SERVICE HDMI 1 HDMI 2 HDMI 3 1 TV ANTENNA Signal input from an antenna cable or satellite 2 CVI Y Pb Pr and AUDIO L R Analog audio and video input from analog or digital devices such as DVD players or game consoles Audio input from devices that require a separate audio connection such as a computer RS 232 Serial Xpress communication with external connected devices You must select COMMUNICATION gt SERIAL XPRESS to use this connector saxPENDANT 1 8 inch mini jack connection to a bathroom speaker or a healthcare pendant control also known as pillow speaker HDMI 3 Digital audio and video input from high definition digital devices such as Blu ray players HDMI 2 Digital audio and video input from high definition digital devices such as Blu ray players HDMI 1 Digital audio
17. cle 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical 1 Notice 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is belleved adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Pixel characteristics LCD products contain a high number of pixels and it is normal and customary to have a limited number of bright or dark pixels This is a structural property of the display within common industry standards an
18. d specifications and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorised in this manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that
19. e Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appliance or EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC GROUND CLAMP ELECTRIC SERVICE EQUIPMENT C D The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged 1 2 22 Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design e Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn the product e Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide s
20. e STANDBY FIRMWARE is rarely updated and is not included when SW TYPE gt ALL is selected To update the STANDBY FIRMWARE the SW TYPE gt STANDBY FIRMWARE must be uniquely selected Download software from a USB device 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SMARTFEATURES gt SW DOWNLOAD D PHILIPS SW DOWNLOAD SOURCE USB 3 Press AVP to select one of the following options e SOURCE Select USB as the source for software download or upload e DIRECTION Select USB TO TV to download the software from the USB device Select TV TO USB to upload the software to the USB device e SW TYPE Select one of the following to upload or download a particular type of software SSB NVM To download SSB NVM software SSB FIRMWARE To download the main TV software STANDBY FIRMWARE To download the TV startup data from the USB device Only used in software download IBOARD NVM To download the TV settings from the USB device IBOARD FIRMWARE To update iboard software from the USB device Only used in software download e ALL To download all the software upgrades from the USB device e START To start the software download L gt TheTV will restart automatically upon the completion of software download There will be multiple downloads and restart cycles when download ALL is selected E e Firmwares cannot be copied from the TV to USB only NVMs may
21. erts WELCOME MESSAGE gt of medium and low priorities Note e Emergency alerts of high priority cannot be disabled for safety reasons 3 Press to select one of the available options e WELCOME MESSAGE To set or clear a welcome message e SWITCH ON CHANNEL To select a channel that is displayed when the TV is turned on SWITCH ON CHANNEL must be installed and in the active channel ring Otherwise Locked will be displayed e SWITCH ON SMARTGUIDE When set to Yes the Smart guide will be displayed whenever the TV is powered on e SWITCH ON VOLUME To set the volume that is used each time the TV is turned on e SWITCH ON PIC FMT To configure the picture format that is used for display when the TV is turned on e POWER ON To configure the power condition that will be restored after an AC power interruption e VOLUME INDICATOR To enable or disable the display of volume indicator e CHANNEL DISPLAY To enable or disable the display of channel number and channel name on the screen Set the welcome message 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt WELCOME MESSAGE 3 Press AVP to select one of the following options e DISPLAY Select YES to display the welcome message Select NO to prevent the display of the welcome message LINE 1 To enter the first line of welcome message Press lt gt to select a character slot and AY to select an al
22. he selected color 6 Press OK for five seconds while pointing to the TV L gt The IV displays the RC color and the TV color on the screen If they do not match program the TV and the RC again 8 Automatically install channels Enter the Philips Hospitality setup menu Press AV to select CABLE TUNING Press gt to select one of the following e YES To receive TV signals from a cable WN e NO To receive TV signals from an antenna Press AV to select AUTO INSTALL TV gt START Press P to start the automatic installation of channels ON Ui A Press any key on the remote control to stop the automatic Installation of channels Note e This option is available only when you select CHANNEL INSTALL gt CHANNEL gt INPUT gt TUNER Select a virtual or physical channel It is always recommended physical channels by setting USE CHANNEL TABLE to NO Enter the Philips Hospitality setup menu 2 Press AV to select USE CHANNEL TABLE D PHILIPS SETUP Note e This option is available only when you select CHANNEL INSTALL gt CHANNEL gt INPUT gt TUNER Select a channel ring Channels are organized in rings in Philips commercial televisions lo make the channels visible to the guest they must be assigned to the same ring that the television is set to display as the current ring 1 Enter the Philips Hospitality setup menu 2 Press AV to select CURRENT RING 3 Press P to select a lis
23. lect one of the following options e BRIGHTNESS To adjust the black level of the image e COLOR To adjust the color e CONTRAST To adjust the peak bright areas of the image e SHARPNESS To adjust the image sharpness e TINT To adjust the color balance in an image e ACTIVE CONTROL Select ON to fine tune the received signals according to the lighting conditions of the room e TREBLE To adjust the treble level e BASS To adjust the bass level e BALANCE To adjust the balance of the speakers e AVL Select ON to reduce the fluctuations in volume when the commercials are aired or when you switch channels Otherwise select OFF EN 15 English 12 Configure the security settings 1 Enter the Philips Hospitality setup menu Press AV to select CONFIGURATION gt SECURITY D PHILIPS SECURITY SECURITY STANDARD 3 Press AVP to select one of the following e SECURITY To specify the security level e KEYBOARD LOCK To enable or disable local TV controls e REMOTE CONTROL LOCK To enable or disable the guest remote control keys e DECRYPTION CONTROL To convert the TV from Pay Per View mode to standalone protected mode Select the security level 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SECURITY gt SECURITY 3 Press to select one of the following settings e STANDARD To access the Philips Hospitality setup menu using the guest remote control or the Philips Ho
24. let ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable e Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time e Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care and sterilization Avoid stationary images as much as possible Stationary images are Images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning e Use a damp not wet cloth with only non aggressive cleaners to wipe the TV Use another damp not wet cloth to clean off the cleaning agent residue from the surface of the TV Recommended cleaning agents include e Bleach solution 10 90 concentration of bleach to water e Denatured alcohol comprising of 80 90 ethanol 10 20 methanol Risk of damage to the TV screen Never touch push rub or strike the screen with any object To avoid deformations and color fading wipe off water drops as so
25. nd as such these buttons are for use with Philips DVD players only The Philips Hospitality setup remote control not included in box YQ OOH SMART SLEEP PHILIPS S TV Standby On Switches the product on or off The product is not powered off completely unless it is physically unplugged SLEEP Sets a delay after which the 1V switches to standby O SMART Launches the picture menu 0 9 Numeric buttons Selects a channel or setting CH GUIDE Displays the list of channels A CH Toggles between the current channel and the last viewed channel Navigation buttons Navigates menus CH Switches to the next or previous channel iK Mutes or restores volume Miscellaneous buttons Only E and A V buttons are used E confirms an entry or selection A V displays the source list VOL Increases or decreases volume M Accesses the Philips Hospitality setup menu RESET Not used GUEST DCM SETUP GUEST Functions as a guest remote control DCM Not used SETUP Allows access to the Philips Hospitality setup menu CE Selects tasks or options B TEXT Toggles teletext on or off 17 RECALL Accesses the Customer Service Menu CSM EN English 4 Smartlinstall Software Philips TV can be completely configure quickly and easily using Philips Smartinstall software available free of charge from your sales representative or from ou
26. o access the Philips Hospitality setup menu and select CONFIGURATION gt SECURITY gt SECURITY gt STANDARD to allow the use of guest remote control see Select the security level on page 16 The Philips Hospitality setup mode cannot be accessed using the Philips Hospitality setup remote control e Check that the switch at the side of the Philips Hospitality setup remote control is set to the SETUP position see Access the Philips Hospitality setup menu with Philips setup remote control on page 9 Picture issues The TV is on but there is no picture e Check that the antenna or the cable is connected properly to the TY e Check that source device and communication protocols are selected correctly e Check that the channel s are installed and in the current ring e Ifthe video is muted select CHANNEL INSTALL gt MUTE gt NONE or CHANNEL INSTALL gt MUTE gt AUDIO to unmute the video see Mute a channel on page 12 The TV is on but picture quality is not good e Check the antenna cable or set top box connections to the TV and ensure that they are properly connected e Check that the picture settings are correct for your TV and the source device 22 EN ys1 8u3 PHILIPS 2010 Koninklijke Philips Electronics N V All rights reserved
27. o save the channel to this category or NO to remove the channel Name a channel Enter the Philips Hospitality setup menu Press AV to select CHANNEL INSTALL gt LABEL Press lt P gt to select a slot to enter a character gt A flashing red mark underlines the selected slot hh WN Press AY to select a character D PHILIPS CHANNEL INSTALL 5 Repeat steps 3 and 4 until you finish naming the channel Mute a channel 1 Enter the Philips Hospitality setup menu 2 Press AVA to select CHANNEL INSTALL gt MUTE 3 Press gt to select one of the following e AUDIO To mute the audio in the channel e VIDEO To mute the video in the channel NONE To enable audio and video in the channel 10 View signal strength or configure content ratings closed caption and emergency alerts 1 Enter the Philips Hospitality setup menu 2 Press AV to select DIGITAL SETUP gt Digital setup menu is displayed on your screen You can configure the content ratings closed caption and emergency alert settings SIGNAL STRENGTH displays the signal strength of the selected channel in percentage D PHILIPS DIGITAL SETUP E e Philips recommends a signal strength of 80 or higher If you see a value below this level you may experience signal dropout issues pixelization picture freeze etc To address low signal strength you should contact your installer Setup digital channels 1 Enter the Philips H
28. ofthe TV and the stand e When wall mounting the TV use only a wall mount that can support the weisht ofthe TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage e Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV e Risk of overheating Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV e Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different e Risk of injury fire or power cord damage Never place the TV or any objects on the power cord e To easily disconnect the TV power cord from the power out
29. ome protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings a Warning To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus Battery Usage CAUTION To prevent battery leakage that may result in bodily injury property damage or damage to the unit e Install all batteries correctly with and alignment as marked on the unit e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time F ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS Ein ui POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H Note to the CATV system installer this reminder is provided to call the CATV system installer s attention to Arti
30. on as possible Environmental care The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging End of life directives This set contains a lamp with mercury please dispose of according to all local state and federal laws Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations 3 Your IV Congratulations on your purchase and welcome to Philips Side controls and indicators POWER Switches the product on or off The product is not powered off completely unless it is physically unplugged Q P CH Switches to the next or previous channel G SOURCE Selects connected devices 4 VOLUME Increases or decreases volume These televisions are shipped in accordance with Energy Star settings and as such the side
31. ospitality setup menu 2 Press AVP to select DIGITAL SETUP gt CHANNEL SETUP Select one of the following options e V CHIP DIGITAL RATING To enable or disable the content ratings for movies TV programs and data as per the VCHIP standard For more information visit www fcc gov vchip e CLEAR ALL RATINGS To clear all the ratings e US MOVIE RATING To enable or disable the movie ratings e US TV RATING To enable or disable the TV ratings e D RATING To configure the downloadable RRT 5 rating e FACTORY CH RESET To clear the digital channel map Note e If you select FACTORY CH RESET you need to re install the channels Configure closed caption text 1 Enter the Philips Hospitality setup menu 2 Press AVA to select DIGITAL SETUP gt DIGITAL CC SETUP gt CAPTION TEXT 3 Press AVP to select and configure options such as CAPTION SIZE CAPTION STYLE TEXT COLOR BG COLOR etc EN 13 English Enable or disable emergency alert 11 Configure the switch on settings 1 Enter the Philips Hospitality setup menu 1 Enter the Philips Hospitality setup menu 2 Press AV to select DIGITAL SETUP gt EMERGENCY ALERT 2 Press AW to select CONFIGURATION gt SWITCH ON OSD 3 Press to select one of the following options e ALWAYS To enable emergency alerts at all times PHILIDS e SKIP LOW PRIORITY To skip the emergency alerts of low EE priority SWITCH ON OSD e SKIP MEDIUM LOW PRIORITY To skip the emergency al
32. phanumeric character LINE 2 To enter the second line of welcome message Press lt P to select a character slot and AV to select an alphanumeric character e CLEAR To clear the welcome message Note e You can have a maximum of 20 alphanumeric characters in each line of your welcome message 14 EN Preset the picture format 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt SWITCH ON PIC FMT 3 Press B to select one of the available picture formats Ls The selected picture format is used to display pictures when the TV is turned on Select the switch on channel 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt SWITCH ON CHANNEL 3 Press B to display the selected channel when the TV is turned on Select the switch on volume 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SWITCH ON OSD gt SWITCH ON VOLUME 3 Press gt to set a volume that Is used each time the TV is turned on Enable or disable the volume indicator 1 Enter the Philips Hospitality setup menu 2 Press AY to select CONFIGURATION gt SWITCH ON OSD gt VOLUME INDICATOR 3 Press gt to select one of the following e YES To display the volume indicator NO To hide the volume indicator Select channel display 1 Enter the Philips Hospitality setup menu
33. r website www philips com hospitality We recommend recommend this method for the quickest setup 5 TV setup access setup menu D PHILIPS SETUP LANGUAGE ENGLISH Press M on a Philips setup remote control with the slider set to SETUP or enter 3 1 9 7 5 3 followed by k MUTE all within 10 seconds on the guest remote control When the security level is HIGH you must use the Philips setup remote control to access the Philips Hospitality setup menu see Select the security level on page 16 To navigate through the Philips Hospitality setup menu Press AW on the remote control to select a menu 2 Press to configure or modify the settings of the selected function 3 Press Mon the Philips setup remote control or MENU on the guest remote control to return to the previous menu Access the Philips Hospitality setup menu with guest remote control 1 Switch on the TV and select a TV channel 2 Press 3 1 9 7 5 3 followed by XMute within 10 seconds L gt The Philips Hospitality setup menu is displayed Access the Philips Hospitality setup menu with Philips setup remote control POWER RECALL gt TEXT SMART SLEEP UEST e 2 3 jean Lom Q IAN J de O00 6 U m 0 ALA 6 Select a language 1 Enter the Philips Hospitality setup menu 2 Press lt P to select a language L gt The setup and guest menus will no
34. security To enable keyboard and RC lock Pro Idiom decryption and SmartSecure CONTROL To configure settings for channels minimum and maximum volume ESP etc SMARTFEATURES To configure the SmartPower USB break in SmartGuide Category SmartUpdate and software download settings AUDIO FEATURES To configure the correct audio source CC V CHIP To configure closed caption and V Chip settings HOTEL INFORMATION To configure the hotel information including hotel name and room number required information when SmartSecure is enabled English Configure the SmartFeatures 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SMARTFEATURES D PHILIPS SMARTFEATURES SMARTPOWER OFF EN 17 3 Press AVP to select one of the following options e SMARTPOWER To enable or disable the power saving mode Select HIGH for maximum power savings e LOW POWER STANDBY To use minimum power when the TV is in standby mode e SMARTCRP Select YES to enable the autosensing feature to switch to source where a video signal is plugged to a side I O Select NO to disable the autosensing feature and to you have to select the video source manually SMARTSECURE See details in the note below e SMARTGUIDE CATEGORIES To determine which function is called on the first press of the CH guide button and which categories will be available USB BREAK IN Select YES to enable the automatic switchover
35. spitality setup remote control e HIGH To access the Philips Hospitality setup menu using the Philips Hospitality remote control only Enable or disable the TV controls 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SECURITY gt KEYBOARD LOCK 3 Press gt to select one of the following settings e ALL To lock all control keys on the TV including the key e YES To lock all control keys on the TV excluding the key e NO To unlock all control keys on the TV Enable or disable the remote control 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt SECURITY gt REMOTE CONTROL LOCK 3 Press to select one of the following settings NO To enable all standard remote control functions YES To disable all standard remote control functions 16 EN Enable standalone mode Decryption control The premium HD content received by a satellite or cable is encrypted using a digital rights management system DRM called Pro ldiom to avoid piracy The technology is embedded in the TV and prevents guests from pirating the content To decrypt the content follow the following steps 1 Enter the Philips Hospitality setup menu Press AV to select CONFIGURATION gt SECURITY gt DECRYPTION CONTROL D PHILIPS DECRYPTION CONTROL STANDALONE 3 Press AV to select one of the following settings e PASSWORD To enter the pass
36. t of channels to watch Note e If you select COMMUNICATION gt SMART RC RING4 is not available see Select the communication protocol on page 10 9 Configure the channels What the guest or the user actually access are program numbers The TV has program numbers 1 250 available Any channel or external input analog or digital can be mapped to any program number giving the hotel complete flexibility of channel mapping For example local channels could be mapped to programs 1 9 News channels could be mapped to the teens Sports channels to the 20s etc Select the mode for signal reception 1 Enter the Philips Hospitality setup menu 2 Press AV to select CABLE TUNING 3 Press gt to select one of the following e YES To receive TV signals from a cable e NO To receive TV signals from an antenna Note e This option is available only when you select CHANNEL INSTALL gt CHANNEL gt INPUT gt TUNER This section explains how to assign program numbers to be the same as the program numbers that the guest can assess on the remote control 1 Enter the Philips Hospitality setup menu 2 Press Y to select CHANNEL INSTALL 3 Press gt to configure the channel settings D PHILIPS CHANNEL INSTALL CHANNEL TV2 4 Press M on the Philips setup remote control or MENU on the guest remote control to return to the main menu Select a program 1 Enter the Philips Hospitality setup menu
37. the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped This product may contain lead or mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Damag
38. to which the receiver Is connected e Consult the dealer or an experienced radio or television technician for help Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by lt CompanyName_ Long gt may void the users authority to operate the equipment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Copyright All other registered and unregistered trademarks are the property of their respective owners CLASS 1 WARNING WARNING THIS TELEVISION IS CONSIDERED TO BE A DEVICE WITH CLASS 1 CONSTRUCTION AND IT MUST BE CONNECTED TO A MAINS SOCKET WITH A PROTECTIVE EARTHING CONNECTION FERN A DO paer DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol DO are trademarks of Dolby Laboratories VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Pro Idiom is a registered trademark of Zenith Electronics LLC Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world
39. w be displayed in the selected language Note e You can choose English Espa ol or Francais as your preferred language 1 Switch on the TV and select a TV channel 2 Set the switch at the side of the remote control to SETUP Press M to display the Philips Hospitality setup menu L gt The Philips Hospitality setup menu is displayed EN 9 English Select mode of communication Press Y to select COMMUNICATION Press AV to select one of the following options e COMMUNICATION To select the communication protocol between the TV and the external device connected to the TV e STORE To store the settings that are modified using the COMMUNICATION menu e PENDANT To enable or disable the healthcare pendant control This is available only when you select COMMUNICATION gt OFF 1 Enter the Philips Hospitality setup menu 2 3 Select the communication protocol 1 Enter the Philips Hospitality setup menu Press Y to select COMMUNICATION gt COMMUNICATION D PHILIPS COMMUNICATION COMMUNICATION OFF 3 Press AVP to select the communication protocol between the TV and the set top box e SP SPI Most commonly used connection e SP 12C When the set top box supports this protocol When SP SPI or SP I2C are selected there are sub menu items for DCM TYPE and CP e SERIAL XPRESS When the set top box supports this protocol When SERIAL XPRESS is selected the speed must be set MULTI R
40. word e CONVERT To decrypt the encrypted digital signal received from a satellite or Pay Per View service E e Ifthe password is entered incorrectly n times the convert line will show LOCKED This can be cleared by unplugging and replugging the AC power to the TV e The other options in DECRYPTION CONTROL menu are displayed only for your information and cannot be modified For detailed instructions on decryption control refer to the Pro ldiom certificate Configure the control options 1 Enter the Philips Hospitality setup menu 2 Press AV to select CONFIGURATION gt CONTROL D PHILIPS CONTROL Press AV to select one of the following options ESP Energy saving programmability Set a time from 1 99 hours to enable ESP Ifthe TV does not receive any command for this time period It enters the standby mode to save energy Select OFF to disable ESP DIGIT TIMEOUT Set a time between 1 9 9 seconds When you press a key on your RC the TV will wait for the specified time before assuming that you are finished entering digits and switching to the entered channel The default time is three seconds If you want to key in two digit or three digit channel numbers do not select the time to be too short 3 DIGIT ENTRY Select YES to enable the selection of three digit channel number channel numbers 1 250 for cable mode and 2 250 for antenna mode Select NO to enable the selection of only two digrt ch
41. y key being broadcast Download software from an RF channel 1 Enter the Philips Hospitality setup menu 2 Press AVP to select CONFIGURATION gt SMARTFEATURES gt SW DOWNLOAD D PHILIPS SW DOWNLOAD SOURCE RF 18 EN 3 Press AVP to select one of the following options SOURCE Select RF as the source for software download DIRECTION Select DOWNLOAD to download the software from the RF channel e CABLE TUNING Select YES to use channels 1 135 for software update Select NO to use channels 2 69 for software update You must select cable tuning as YES for use with PSG RF CHANNEL NUMBER Select the RF channel number for software update e SW TYPE Select one of the following types of software for download SSB NVM To download SSB NVM software SSB FIRMWARE To download the main TV software STANDBY FIRMWARE To download the main TV startup data IBOARD NVM To download the TV settings IBOARD FIRMWARE To update board software ALL To download all the software upgrades e SW VERSION CHECK Select YES to check the software version for download This will download a newer version START To start the software download gt The TV will restart automatically upon the completion of software download There will be multiple download and restart cycles when download ALL is selected E e Software download from an RF source is available in only certain models e Th
Download Pdf Manuals
Related Search