Rosewill RC-226
Contents
1. 6Gbps SATA 2Ports Low Profile PCIe Host Adapter User Manual 6Gbps SATA 2Ports Low Profile PCIe Gen2 Host Adapter User Manual 1 Introduction 2Ports 6Gbps SATA III PCI Express 2 0 host board to support NCQ 1 1 Features 6Gbps SATA II 2 Ports Supports PCI Express 2 0 Fully compliant with Serial ATA specifications 3 0 Supports SATA III transfer rate of 6 0Gbps 3 0Gbps 1 5Gbps Supports ATA and ATAPI commands Supports Native Command Queuing NCQ Support AES 256 48 bits LBA can Break Capacity Limit to Support HDD larger than 137GB Low Profile PCI Form Factor Includes an additional Low Profile Bracket Hot plug capability Two Pin headers on board for LED connection Drivers support for 64bit 32bit Windows 7 Vista XP Fully RoHS compliant 1 2 Package Contents Low Profile PCIe Host Adapter Users Manual Driver CD Low Profile Bracket 2 Software Installation 2 1 Windows 7 Vista XP Fresh OS installation 1 Power off the system Insert SATA Card into an available PCIe slot Connect serial ATA cable s between the SATA port and serial ATA device s Power up the system 6Gbps SATA 2Ports Low Profile PCIe Gen2 Host Adapter User Manual 2 Put your Windows OS Setup CD into the CD ROM DVD drive or diskette including all Directories and Files under SATA6G_M9128 Fresh into the floppy drive A of XP system Continue Step 3 if your system OS is XP but jump to Step 5 for Windows 7 Vista 3 Pr2. e on Driver CD E SATA6G_M9128 to have the latest driver for 32bit 64bit Windows until Finish 5 Windows will display message again to ask you continue the installation Cancel and go to auto driver installation by browsing the Driver CD Run installer consoleSetup exe on Driver CD E SATA6G_M9128 Config until Finish 8 Once the Adding Installation has completed go to Section 2 3 to verify if the correct installation 2 3 Verifying The installation Windows 7 Vista XP 6Gbps SATA 2Ports Low Profile PCIe Gen2 Host Adapter User Manual 1 Right click on My Computer icon select Properties left click on Hardware tab and then on Device Manager button 2 Double click on SCSI and RAID or Storage Controllers and System Devices to check if there is no or marks in front of Marvell 91XX SATA 6G Controller and Marvell 91XX Config Device the drivers are installed and started correctly If yes please repeat steps 2 2 4 or 2 2 7 FE CE Thank you for purchasing a quality Rosewill Product Please register your product at www rosewill com for complete warranty information and future support for your product 2 6G9128 01C
3. ess F6 for third party SCSI or driver installation at the beginning of text mode installation Press S when screen message asks and Select amp Enter Marvell shared library for 32 64 bit install first Then Press S when screen message asks and repeat Select amp Enter Marvell 91XX SATA Controller 32 64 bit Driver 4 Press Enter again to continue on with text mode setup then go to Step 7 after the XP installation is finished 5 Follow the instructions to load file mv91xx inf by browsing either SATA6G_M9128 Fresh amd64 or i386 Then select your choices of disk partition and other setup operations 6 After setup examines your disks it will copy files from OS CD to the hard drive and restart the system After restart the setup process will resume to finish the Windows 7 Vista installation 7 Once the Fresh Installation has completed go to Section 2 3 to verify if the correct installation 2 2 Adding the HBA to an existing Windows 7 Vista XP installation 1 Power off the system Insert SATA Card into an available PCIe slot Power up the system 2 During system boot up Windows will display the messages such as Found New Hardware Wizard XP Windows needs to install Vista amp Device driver software was not successfully installed Windows 7 3 Cancel and go to auto driver installation by browsing the Driver CD Run the installer drvSetup ex
Download Pdf Manuals
Related Search