Philips LCD TV 32PFL5409
Contents
1. e Press BACK A CH on the remote control to return to the previously viewed channel e Press CH on the remote control or P CH on the side of the TV e Press OK to use the channel matrix e Enter a channel number using the Numeric buttons Note e When you use a favorite list you can only select those channels in the list see Select a favorite list on page 12 EN English Watch connected devices Use the source button onenaanany DEMO SCENEA DUALI I SLEEP 1 Press SOURCE L gt The source list appears 2 Press A orY to select the connected device 3 Press OK to watch the connected device Use the home menu DEMO SCENEA DUALI II_ SLEEP oo aN a BROWSE OPTIONS ome Note e You can add new devices to the home menu for easy access Press Home L gt The home menu appears 2 Press AV lt 4P to select the device Press OK to watch the connected device on your TV 8 EN Adjust TV volume F Sales cH ve E FORMAT To increase or decrease volume e Press 4 e Press VOLUME on the side of the TV To mute or unmute sound e Press X to mute the sound e Press X again to restore the sound 5 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings and acces2. BROWSE O P OPTIONS i OF HO mae aos 1 When watching TV press OK to display the channel grid 2 Press OPTIONS L gt The channel options menu appears 12 EN 3 Press OK to select Select fav list gt Favorite L gt The favourite list appears 5 Press OK Ly Only channels in the favourite list appear in the channel grid Add a channel to a favourite list Tip e View all channels before adding a channel to a favourite list 1 When watching TV switch to the channel you want to add to a favourite list see Switch channels on page 7 2 Press AVP to select a channel to add to a favourite list 3 Press OPTIONS L gt The channel options menu appears Press 4 to select Mark as favourite Press OK L gt The channel is added to the favourite list UI A Tip e When watching TV press 2 OPTIONS gt Mark as favourite to save the current channel into a favourite list Remove a channel from a favorite list Note e Select the favorite list to edit before removing a channel When watching TV press OK to display the channel grid Press 2 OPTIONS Ly The channel options menu appears V Press OK to enter Show favorite ch Press amp to select a favorite list and press OK to confirm the choice Press amp lt P to choose the channel that you wish to remove from the list Press OPTIONS Press 4
3. System audio control When you connect your TV to HDMI CEC compliant devices your TV can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your TV You can use the remote control from the connected device to adjust the volume Remote control RC key forwarding RC key forwarding allows you to control EasyLink compliant devices using your TV remote control Pixel Plus Link Pixel Plus Link overrides the settings of connected devices and uses the settings of the TV EasyLink buttons You can control EasyLink compliant devices with the following buttons on the remote control of your TV Button EasyLink function gt II Play Starts pauses or resumes Pause playback on your EasyLink device E Stop Stops playback on your EasyLink device Record Starts or stops video recording on your EasyLink device 44 Fast Searches backward Backward gt gt Fast Searches forward Forward 0 9 When EasyLink is enabled Numeric selects a title chapter or track buttons Avd gt Navigates through the menus of the EasyLink compliant device OK Activates a selection or accesses the menu of the EasyLink compliant device 3 Displays the menus of the OPTIONS EasyLink compliant device Note that when Home is pressed the TV menu is displayed O Standby When EasyLink is enabled On switche
4. amp lt P to select Reorder Select the channel you want to reorder and press OK Press amp lt P to select the new position for the channel Press OK to confirm the new position Press 2 OPTIONS L gt Done reordering appears Press OK to finish reordering EN 21 English 7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Note e Different types of connectors may be used to connect a device to your TV depending on availability and your needs Back connectors 4 HDMI 1 2 Digital audio and video input from high definition digital devices such as Blu ray players D VGA PC and PC AUDIO IN Audio and video input from a computer G TV ANTENNA Signal input from an antenna cable or satellite 4 SERV U For use by service personnel only 22 EN AV OUT VIDEO OUT and AUDIO OUT L R Audio and video output to analog devices such as another TV or a recording device AV1 VIDEO IN and AUDIO IN L R Analog audio and video input from analog or digital devices such as DVD players satellite receivers and VCRs TD CVI 1 2 Y Pb Pr and AUDIO L R Analog audio and video input from analog or digital devices such as DVD players or game consoles Side connectors 4 USB Data input from USB storage devices 2 HDMI Digital audio and video i
5. Compensates color variations in NTSC encoded transmissions e Sharpness Adjusts the level of sharpness in image details 10 EN e Noise reduction Filters and reduces noise in an image e Color temperature Introduces more orange tones Warm or blue tones Cool to the picture e Pixel Plus HD Fine tunes each pixel to match surrounding pixels This produces a brilliant high definition image e Dynamic contrast Automatically enhances contrast in an image e Dynamic backlight Adjusts the brightness of the TV backlight to match lighting conditions e Color enhancement Makes colors more vivid and improves the resolution of details in bright colors You can switch this feature on or off e PC mode Adjusts picture settings when a PC is connected to the TV e Light sensor Dynamically adjusts picture settings to match lighting conditions e Picture format Changes the picture format e Horizontal shift Adjusts the picture horizontally for PC VGA or HD input e Vertical shift Adjusts the picture vertically for PC VGA or HD input Change picture format Je s a t tr T Press FORMAT L gt A picture format bar appears 2 Press AY to select a picture format L gt The selected picture format is activated 3 Press OK to confirm your choice Summary of picture formats The following picture settings can be configured Note e De
6. Computer connection issues The computer display on the TV is not stable e Check that a supported resolution and refresh rate is selected on the computer e Set the TV picture format to unscaled Contact us If you cannot resolve your problem refer to the FAQs for this TV at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in this User Manual Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty Note e Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 10 Index B Batteries Bracket 3 Channel list favorite troubleshooting update Channels favorite list install automatic manual rearrange rename Child lock TV lock Clock Computer format technical specifications Connections HDMI troubleshooting technical specifications troubleshooting Connectors assign devices D Demo Devices assign Display resolution screen saver E EasyLink A 2 28 12 29 12 12 20 20 21 20 14 14 27 30 27 30 27 18 2i 27 17 disable 25 enable 25 Environmental care 4 F Factory settings 19 Favorite list select 12 set up 12 H HDMI cable troubleshooting 30 Home mode 18 l Installation automatic 20 manual 20 K
7. Kensington lock 26 L Language troubleshooting 29 Location 18 Lock Kensington 26 TV 14 M Menu child lock 14 language 29 main menu 9 troubleshooting 23 Multimedia technical specifications 27 Music USB 16 with slideshow 16 EN 31 English P Picture format troubleshooting Picture settings PIN code Power R Reception Remote control overview technical specifications troubleshooting S Safety Screen saver Settings assistant Sleep timer Slideshow with music Smart settings Software update analog version Sound settings Standby troubleshooting F Technical specifcations Timer on timer sleeptimer standby Transmission troubleshooting Troubleshooting TV adjust volume disconnect from mains menu position safety 32 EN 29 29 29 29 27 29 17 13 16 10 11 18 18 11 29 27 13 13 13 29 29 22 26 screen care software standby switch channels switch off switch on transporting wWwnNNNN OO SB troubleshooting 29 tuner technical specifications 27 TV overview 5 wall mount 3 28 TV lock lock channels 14 lock connected devices 14 PIN code 293 U USB listen to music 16 upload a picture from 17 view photos 15 V Video format video format technical specifications 27 Volume adjust 8 W Wallpaper 17 EN 33
8. decreases volume PHILIPS TELEVISION C Standby On e Switches the TV to standby if the TV is On e Switches the TV on ifthe TV is in standby EN 5 English On TELETEXT Toggles teletext on or off SOURCE Selects connected devices Color buttons Selects tasks or options SLEEP Sets a delay after which the TV switches to standby DUAL Iu Switches Stereo and Nicam Stereo to Mono Selects first language Dual I or second language Dual Il in bilingual programs ft Home Toggles the home menu on or off OPTIONS Accesses options relating to the current activity or selection OK Confirms an entry or selection Displays a matrix of channels AV lt gt Navigation buttons Navigates through the menus INFO Displays program information if available lt lt Backward Searches backward gt gt Forward Searches forward gt IH Play Pause Starts pauses or resumes disc play Record Starts or stops video recording E Stop Stops disc play X Mute Mutes or restores audio output EN CH Channel Switches to the next or previous channel FORMAT Selects a picture format 0 9 Numeric buttons Selects a channel or setting PICTURE Smart picture Launches the smart picture menu 2 SOUND Smart Sound Launches the smart
9. directory of the USB device Update software analog broadcasts Before performing this procedure be sure to Set aside some time to complete the entire update e Have available a USB storage device with at least 64MB of storage space Have access to a computer with a USB port and internet access Press Home Select Setup gt Software update gt Update assistant Select Start Connect the USB storage device to your computer UI Aw Na Follow the on screen instructions to complete the update 18 EN Change TV preferences The Preferences menu allows you to customize various features and functions 1 Press Home 2 Select Setup gt Installation gt Preferences e Location Optimizes TV settings for your location home or shop e Volume bar Displays the volume bar when adjusting the volume e EasyLink Enables one touch play and one touch standby between EasyLink compliant devices e Pixel Plus Link Overrides the settings of connected devices and uses the settings of the TV e E sticker For shop mode only Sets the location of the e sticker Start a TV demo You can use demonstrations to better understand the features of your TV Some demos are not available on certain models When a demo is available it is displayed in the menu list INCR SURR TELETEXT SOURCE EE fa S DEMO SCENEA DUALI I SLEEP i i o 1 Press
10. selected smart sound setting is applied Adjust sound settings 1 Press Home 2 Press AVP to select Setup gt Sound L gt The Sound menu appears 3 Press AVP to select and adjust e Smart sound Accesses pre defined smart sound settings e Bass Adjusts the bass level e Treble Adjusts the treble level e Volume Adjusts the volume e Balance Adjusts the balance of the right and left speakers to best suit your listening position EN 11 English e Dual I Il Selects between audio languages if dual sound is broadcast e TV speakers Sets the TV speakers on or off or outputs sound to an EasyLink compliant device EasyLink must be activated in the Preferences menu to make the TV speakers menu available e Mono Stereo Selects between mono or stereo if stereo is broadcast e Surround Enables spatial sound e Headphone volume Adjusts headphone volume e Auto volume Automatically reduces sudden volume changes for example when switching channels When enabled this produces a more consistent audio volume e Delta volume Corrects volume differences between TV channels and connected devices switch to your connected device when adjusting Delta volume Create and use list of favourite channels You can create lists of your preferred TV channels and radio stations so that you can find those channels easily Select a favourite list enna
11. to select Unmark as fav Press OK L gt The channel is removed from the favorite list COND WwW AW Use timers You can set timers to switch the TV on or switch to standby at a specified time Automatically switch the TV to standby sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time Tip e You can always switch off your TV earlier or reset the sleeptimer during the countdown Press Home 1 2 Press AVP to select Setup gt Features gt Sleep timer L gt The Sleep timer menu appears 3 Press lt P to set the sleep time L gt The sleeptimer can be up to 180 minutes in steps of five minutes If set to zero minutes the sleeptimer is switched off 4 Press OK to activate the sleeptimer tL The TV switches to standby after the pre defined period of time Automatically switch the TV on on timer You can switch the TV to a specified channel at a specified time from standby Press Home Press AVP to select Setup gt Features gt On timer Press gt to enter the On timer menu Press amp V lt P to select Activate and set a day of the week or frequency Press OK to confirm Press AVP to select Time and set the starting time Press Done to confirm CON AW AUW N Press amp lt P to select Program no and set the channel 9 Press OK to confirm 10 Press Home to exit Ea e Select On timer
12. B port including but not limited to the following portable storage devices such as external hard drives and mini hard drives MP3 player digital camera phone portable video player portable multimedia player Connect a USB storage device and enter the content browser Turn on the TV Connect the USB device to the USB port on the side of the TV Press Home L gt The home menu appears N Press amp lt P to select Browse USB Press OK to confirm L gt The USB content browser appears mR w Tip e Press amp BROWSE to switch between thumbnail and file browsing views Disconnect a USB storage device Caution e Follow this procedure to avoid damage to your USB storage device 1 Press Home to exit the USB menu 2 Wait for five seconds before disconnecting the USB storage device View photos 1 Inthe USB content browser select Picture and press to enter Press GUIDE to switch between thumbnail and file browsing views Press amp lt 4P to select a photo or a photo album Lh WwW N Press OK to view the selected photo in full screen mode Tip e When in full screen mode press 4 gt to move between photos View a slide show of your photos 1 When a full screen image of a photo Is displayed press OK or PIL L gt A slide show begins from the selected image 2 Press e OK or PIE to pause the slide show L gt Thellicon
13. DEMO on the remote control 2 Press AY to select a demo and press OK to view it 3 Press DEMO to exit Reset the TV to factory settings You can restore the default picture and sound settings of your TV Channel installation settings remain the same 1 Press Home 2 Select Setup gt Installation gt Factory settings 3 Press OK or to enter the Factory settings menu L Reset is highlighted 4 Press OK to reset to factory settings 5 Press amp Home to exit EN 19 English 6 Install channels The first time you setup your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to reinstall and fine tune channels Automatically install channels This section describes how to search and store channels automatically 1 Press Home 2 Select Installation gt Channel install gt Channel assistant 3 Press OK 4 Follow the on screen instructions to install channels Manually install channels This section describes how to search and store analog TV channels manually Step 1 Select your system Note e Skip this step if your system settings are correct 1 Press Home 2 Press ava to select Setup gt Installation gt Channel install gt Manual install Ly The Manual install menu appears Press amp lt 4P to select and enter S
14. Register your product and get support at www philips com welcome oo 32PFL5409 98 32PFL5609 98 42PFL5609 98 47PFL5609 98 EN User manual PHILIPS Contents 1 Notice 2 2 Important 3 3 YourTV 5 TV overview 5 4 Use your TV 7 Switch your TV on off or to standby 7 Switch channels 7 Watch connected devices 8 Adjust TV volume 8 5 Use more of your TV 9 Access TV menus 9 Change picture and sound settings 9 Create and use lists of favorite channels 12 Use timers 13 Use child control 14 Use the TV clock 14 View photos play music and watch video from a USB storage device 15 Use Scenea to display a picture as TV wallpaper 17 Update the TV software 18 Change TV preferences 18 Start a TV demo 18 Reset the TV to factory settings 19 6 Install channels 20 Automatically install channels 20 Manually install channels 20 Rename channels 20 Rearrange channels 21 7 Connect devices 22 Back connectors 22 Side connectors 22 Connect a computer 23 Use dual view 23 Assign devices 27 Use Philips EasyLink 24 Use a Kensington lock 26 8 Product information 27 9 Troubleshooting 29 10 Index 31 EN English 1 Notice 2009 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earl
15. Watch video from a USB device 1 In the USB content browsert press to enter the VIDEO folder 2 Press AV lt P to select a video 3 Press OK or PII to play the video e Press the color buttons on the remote control to perform the functions shown at the bottom of the screen e Press OK or PII to pause press OK or gt II again to resume e Press PP to fast forward search e Press 44 to fast backward search e Press W to stop playback Note e Ifthe function bar at the bottom of the TV screen disappers press any color button to make it reappear e Ifthe function bar at the bottom of the TV screen disappers press any color button to make it reappear 16 EN Use Scenea to display a picture as TV wallpaper You can use the Scenea feature to display a still picture as wallpaper on your TV This feature is for home mode only Activate Scenea DEMO s SCENEA DUALI I SLEEP INCR SURR TELETEXT SOURCE ESB Single picture wallpaper Press SCENEA on your remote control Ly The default or pre loaded picture is displayed e To deactivate the wallpaper press any remote control button except SOUND and O PICTURE e The wallpaper is also deactivated when you connect a USB storage device to the TV or start an EasyLink compliant device through one touch play Wallpaper slide show Make sure the wallpaper is not yet activated 1 Connect a USB st
16. an support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away e Ensure that no part of the TV hangs over the edge of the surface e Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating Never install the TV in a confined space Always leave a space of at least 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different EN 3 English e Risk of injury fire or power cord damage Never place the TV or any objects on the power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord
17. appears e Press lt 4 or gt gt to move between images e Press BACK or E to stop the slide show EN 15 English Change slide show settings 1 When viewing a slide show press OPTIONS L gt The slide show options menu appears 2 Press AY to select one of the following e Start Stop slide Starts or stops a slide show e Slideshow trans Sets the transition from one picture to the next e Slideshow freq Sets the amount of time that a picture is shown e Rotate image Rotates a picture e Show info Displays the picture name date size and next picture in the slide show 3 Press OK to confirm your setting Listen to music 1 Connect a USB storage device to the USB port on the side of the TV Press gt to enter the menu Select Music and then press to enter the Music folder Press A or to select a song or a music album Press OK or PII to play the selected song or album e Press the color buttons on the remote control to perform the functions shown at the bottom of the screen e Press OK or PII to pause press OK or PI again to resume e Press BP to fast forward search e Press 44 to fast backward search e Press W to stop playback mn A WN Note View a slide show with music You can view a slide show of your stored pictures with background music 1 Select an album of songs 2 Press OK 3 Select an album of pictures 4 Press OK
18. at all times When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable e Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time e If the TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and color fading wipe off water drops as soon as possible Recycling Wa Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is cove
19. ction is required The creaking sound is normal expansion and contraction of the TV as it cools and warms up This does not impact performance TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T or DVB C in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV e Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the
20. e you through the best picture and sound settings 1 Press Home 2 Press AVP to select Setup gt Picture gt Settings assistant 3 Press OK L gt The Settings assistant menu appears Follow the on screen instructions to choose your preferred picture settings EN 9 English Use smart picture Use smart picture to apply pre defined picture settings Press O PICTURE L gt The Smart picture menu appears 2 Press av to select one of the following smart picture settings e Personal Lists customized personal picture settings e Vivid Maximizes picture settings e Standard Adjusts picture settings to suit most environments and types of video e Movie Applies picture settings ideally suited for movie viewing e Game Applies picture settings maximized for fast moving games e Energy saving Applies low energy picture settings 3 Press OK to confirm your choice L gt The selected smart picture setting is applied Manually adjust picture settings 1 Press Home 2 Press AVP to select Setup gt Picture L gt The Picture menu appears 3 Press AYP to select from the following settings and adjust e Smart picture Accesses pre defined smart picture settings e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas e Color Adjusts color saturation e Hue
21. evices connected to your TV Press Home Select Add new device Press OK or P Press A or to select a device and press gt Press 4 or to select the connector your device is connected to and press P U A WN If available press 4 or to select the audio connector your device is connected to and press P 6 Switch on your device and check for video and audio output 7 Ifthere is video and audio output press OK Repeat the procedure until all devices are correctly assigned to connectors Use Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices Note The EasyLink compliant device must be switched on and selected as the source 24 EN EasyLink features One touch play When you connect your TV to devices that support one touch play you can control your TV and the devices with one remote control For example when you press Play on your DVD remote control your TV automatically switches to the correct channel to show the DVD content One touch standby When you connect your TV to devices that support standby you can use your TV remote control to put your TV and all connected HDMI devices in standby mode
22. flexibility to change and save settings EN 29 English The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is picture but no sound from the TY Note e If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted There is picture but sound quality is poor e Check that the sound settings are correctly set There is picture but sound comes from one speaker only e Verify that sound balance is set to the center HDMI connection issues There are problems with HDMI devices e Note that HDCP support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognize the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional 30 EN audio cable is connected to AUDIO L R or AUDIO IN mini jack only
23. gt Activate gt Off to disable On timer e When On timer is Off only Activate can be selected e Set the TV clock before activating On timer feature EN 13 English Use child control You can prevent your children from watching certain programs or certain channels by locking the TV controls Set or change your PIN code 1 Press Home 2 Press AVP to select Setup gt Features gt Change Set code Ly The Change Set code menu appears 3 Enter the code with the Numeric buttons L gt A message appears confirming that your code is created or changed Tip e If you forget your code enter 8888 to override any existing codes Lock or unlock all channels and connected devices 1 Press Home 2 Press AVP to select Setup gt Features gt TV lock 3 Press to enter the TV lock L gt A screen appears prompting you to enter code Enter your code using Numeric buttons Press 4 to select Lock or Unlock Press OK L gt All channels and connected devices are locked or unlocked oO UB N Press Home to exit Note e If you select Lock you have to enter your code every time you turn on your TV 14 EN Lock or unlock one or more channels 1 When watching TV press OK to display the channel grid Press AV lt 4P to select a channel to lock or unlock Press OPTIONS Press 4 to select Lock Unloc
24. ier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorised in this manual shall void the warranty 2 EN Compliance with EMF Kon
25. inklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Copyright All other registered and unregistered trademarks are the property of their respective owners Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Portions of this software are copyright The FreeType Project www freetype org 2 Important Read and understand all instructions bef
26. k chan UAW N For each selection press OK to lock or unlock the channel Use the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press OPTIONS L gt The TV options menu appears 2 Select Clock 3 Press OK Ly The clock is displayed Note e The clock is disabled automatically after ten minutes To disable the clock before that repeat this procedure Change the clock mode Note e Not available in all models 1 Press Home 2 Select Installation gt Clock gt Auto clock L gt The Auto clock menu appears 3 Select Automatic or Manual View photos play music and watch video from a USB storage device Caution e Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Your TV is fitted with a USB connector that enables you to view photos listen to music or watch movies stored on a USB storage device Supported file formats Pictures JPEG non progressive only Music MP3 Video MP4 M4V RMVB e Only FAT or DOS formatted USB storage devices are supported File names must not exceed 128 characters Your TV only supports USB flash drives in FAT FAT 32 format It does not support other devices that can be connected to the US
27. nput from high definition digital devices such as Blu ray players 3 S VIDEO S Video side to be used with Audio L R connectors for camcorder game console etc When you use the S Video side for video signals do not use the Composite video side input for video signals 4 VIDEO Composite video input from analog devices such as VCRs S AUDIO L R Audio input from analog devices connected to VIDEO or S VIDEO a Stereo audio output to headphones or earphones Connect a computer Before connecting a computer to the TV e Set the monitor refresh rate on your computer to 60Hz e Press FORMAT and change the TV picture format to Unscaled Connect a computer with one of the following connectors e Connections via DVI or VGA require an additional audio cable HDMI cable e DVI HDMI cable PC AUDIO IN PC IN AUDIO e HDMI cable and HDMI DVI adaptor e VGA cable Use dual view Press Home Select Setup gt Features gt Dual View Select On Press OK Press OK to exit UAW NS Note e When the dual view mode is turned on a small window for TV input appears on the upper right hand corner of the TV screen The audio output is still from the VGA input EN 23 English Add devices After connecting devices assign the device attached to each connector This allows you to easily identify d
28. orage device to the TV 2 Press SCENEA i gt All pictures in the USB storage device are displayed e The wallpaper display duration is determined by the pre defined sleeptimer settings see Automatically switch the TV to standby sleeptimer on page 13 When sleeptimer is off the wallpaper is displayed for a maximum of 120 minutes Upload a wallpaper picture from a USB device Before performing this procedure be sure to have available a USB storage device containing the picture you intend to use as wallpaper Note The file size of the picture must not be more than 1MB 1 Connect the USB storage device to the TV 2 Press Home L gt The home menu appears Press amp lt 4P to select Browse USB Press amp 4P to select a picture Press SCENEA UI A w EN 17 English Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Check www philips com support for availability Check the current software version 1 Press Home 2 Select Setup gt Software update gt Current software Download the software 1 On your PC open a web browser and go to www philips com support 2 Find information and software related to your TV and download the latest software upgrade file to your PC Decompress the ZIP file AN GW Copy the autorun upg file to the root
29. ore you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety e Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swiveled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25 kg When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that c
30. ormation e Antenna input 75ohm coaxial IEC75 e TV system NTSC PAL M PAL N Product information is subject to change e Video playback NTSC SECAM PAL without notice For detailed product information go to www philips com support Multimedia Supported display resolutions Connection USB e Playback formats MP4 RM RMVB JPEG Computer formats MP3 HDMI Container Video Audio File a Codec Codec extension Resolution Refresh rate Hz mbes MPEG A MPEG an 640x480 60 72 75 85 audio mpg 800x600 60 72 75 85 1024x768 60 70 75 85 1280x768 60 1360x768 60 E AAC mp4 RealMedia Real Media AAC rm VGA 8 9 10 Cook rmvb Resolution Refresh rate Hz 640x480 60 72 75 85 R 800x600 60 72 75 85 emote contro 1024x768 60 70 75 85 1280x768 60 e Batteries 2 x AAA R03 type 1280x1024 60 1360x768 60 Video formats Connections Decolen eres e Headphone out stereo mini jack 720 x 480i 60 S Video 720 x 576p 50 a 720 x 576i 50 CVBS in 1280 x 720p 60 e CVBS out 1280 x 720p 50 e YPbPr Component video CVI in 1920 x 1080i 50 60 VGAin 1920x 1080p 24 25 30 50 60 s ON e VGA Audio in gt USB e Service connector EN 27 English Power e Mains power AC 110 240V 50 60Hz Standby power lt 0 15W e Ambient temperature 5 to 35 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount or aVESA compatible TV mount To prevent damage to cables and connecto
31. pending on the format of the picture source some picture settings are not available gm Super zoom Not for HD and PC mode Removes the black bars on the side of 4 3 broadcasts There is minimal distortion 4 3 Shows the classic 4 3 format Subtitle zoom Displays 4 3 pictures over the full area of the screen with sub titles visible Part of the top of the picture is clipped off Movie exp 14 9 Not for HD and PC mode Scales 4 3 format to 14 9 Movie exp 16 9 Not for HD and PC mode Scales 4 3 format to 16 9 Wide screen Stretches the classic 4 3 format to 16 9 Unscaled For HD and PC mode only and in selected models only Allows maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results Use smart sound Use smart sound to apply pre defined sound settings Oe JIC PICTURE 1 Press SOUND L gt The Smart sound menu appears 2 Press av to select one of the following smart sound settings e Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Personal Applies the settings that were customized in the sound menu 3 Press OK to confirm your choice L gt The
32. red by the European Directive 2002 96 EC Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health 3 YourTV Remote control fo Congratulations on your purchase and Q9 welcome to Philips To fully benefit from the 8 o INcRSuRR HEBT SOURCE y support that Philips offers register your product D 1 a at www philips com welcome am ee m mm 3 on BROWSE OPTIONS TV overview D This section gives you an overview of commonly used TV controls and functions Side controls and indicators S QBOQOOHQ CQOQLOYLOO 556 6 8 4 POWER Switches the TV on or off The TV is not powered off completely unless it is physically unplugged 22 P CH Switches to the next or previous channel G SOURCE Selects connected devices 4 VOLUME Increases or
33. rs be sure to leave a clearance of at least 5 5 cm from the back of the TV Warning e Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage TV VESA compatible wall screen bracket type size 32 37 200 x 200 mm M6 42 47 400 x 400 mm M6 42 M8 G7 28 EN 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature e Enter 8888 The TV menu is in the wrong language e Change the TV menu to your preferred language When turning the TV on off to standby you hear a creaking sound from the TV chassis e No a
34. s other features Access the home menu The home menu gives you easy access to connected devices picture and sound settings as well as other useful features DEMO SCENEA DUALI M SLEEP gt pn vo s H BROWSE A Aa OPTIONS 1 Press Home L gt The menu screen appears m O ce lt Add new device Setup ee atch TV 2 Press the AVP to select and navigate through one of the following menus e Watch TV Switches back to the antenna source If another source is selected e Setup Accesses menus that allow you to change picture sound and other TV settings e Add new device Adds new devices to the home menu 3 Press OK to confirm your choice 4 Press Home to exit Tip e After selecting Add new device follow the on screen instructions to select the correct device and connector Remove devices from the home menu If a device is no longer connected to the TV remove it from the home menu 1 Press Home 2 Press AV lt 4P to select a device to remove 3 Press OPTIONS L gt The Remove device list appears 4 Press OK and select Remove to remove the device L gt The selected device is removed from the home menu Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Use settings assistant Use the settings assistant to guid
35. s the TV and all EasyLink devices to standby Note that you must press and hold Standby On for at least 3 seconds for this to occur Tip e Press TV to switch back to the antenna source from EasyLink mode Enable or disable EasyLink Note e Do not enable Philips EasyLink if you do not intend to use it 1 Press Home 2 Select Installation gt Preferences gt EasyLink 3 Select ON or OFF Enable or disable remote control key forwarding 1 Press OPTIONS Select En Dis RC pass Press OK 2 3 4 Press or Y to highlight an HDMI connector 5 Press OK to enable RC key forwarding for the selected HDMI connector Set TV speakers to EasyLink mode When enabled this feature automatically turns off TV speakers when content from an EasyLink compliant home theater system is played Audio is played only from the home theater system s speakers 1 Press Home 2 Press AVP to select Setup gt Sound L gt The Sound menu appears 3 Select TV speakers L gt The TV speakers menu appears 4 Select Auto EasyLink L gt TV speakers are set to EasyLink mode EN 25 English Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington lock between the slot and a permanent object such as a heavy table 26 EN 8 Product Tuner Reception Transmission inf
36. sound menu 1 Volume ncreases or decreases volume gt BACK A CH Returns to a previous screen Toggles between the current channel and the last viewed channel BROWSE Displays a matrix of channels SCENEA Wallpaper Displays wallpaper on your TV screen DEMO Toggles the demonstration menu on or off TV Switches back to the antenna source from EasyLink mode 3 INCR SURR Enables Incredible Surround for stereo sources Enables spatial mode for mono sources 4 Use your TV This section helps you perform basic TV operations Switch your TV on off or to standby To switch on e If the standby indicator is off press POWER at the side of the TV e If the standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press OPOWER at the side of the TV Ly The standby indicator switches off Tip e Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Note If you cannot locate your remote control and want to switch on the TV from standby press P CH at the side of the TV Switch channels FORMAT tas
37. ystem A GW Press 4 to select your country or region 5 Press OK to confirm 20 EN 6 Press Home to exit Step 2 Search and store new TV channels 1 Press Home 2 Press AVP to select Setup gt Installation gt Channel install gt Manual install L gt The Manual install menu appears Press amp lt P to select and enter Search Press AY or use Numeric buttons to manually enter the three digit frequency Press OK to begin search Press lt when the new channel is found NO AW Press amp to select Store new channel to store the new channel under a new channel number 8 Press to enter Store new channel 9 Press lt b to select Yes and press OK to store the new channel 10 Press Home to exit Rename channels Channels can be renamed so that a name of your choice appears whenever the channel is selected 1 When watching TV press OK to display the channel grid 2 Select the channel you want to rename 3 Press OPTIONS Ly The channel options menu appears Press 4 to select Rename chan Press 4 to select a character and press gt to add another character Select Done Press OK NO Ut Rearrange channels After you install channels you can rearrange the order in which they appear 1 2 00 No Ww AW When watching TV press OK to display the channel grid Press 2 OPTIONS Ly The channel options menu appears Press
Download Pdf Manuals
Related Search