Nady Systems PMC-2X car kit
Contents
1. 5V adapter into the external DC Jack 2 Connect the other end of the adapter to your 12V DC motorcycle battery 2 Connecting Your Headset Insert both the driver and passenger headsets in the two Headset Jacks 3 3 Intercom Only Operation Flick INT OFF switch 4 to INT position to turn on power A power LED 5 lights to indicate the unit is in operation 4 To Adjust Volume Control Simply press the Volume Up 6 or Volume Down 7 buttons to achieve a comfortable listening level You are now ready for full duplex simultaneous two way con versation 5 External Music Aux In Operation AUX IN To add an external music source Portable Tape CD player AM FM radio to the PMC 2X use an ordinary stereo mini phone plug jumper cable 3 5mm TRS phone plugs both ends and insert one end into the AUX IN jack 8 Connect the other end to your external sound source For proper operation please verify that the audio source has less then 200mW 8 ohms audio output power 3 5 G0 8 se ore of 6 VOLUME 4 7 Low PMC 2x MOTORCYCLE INTERCOM 1 2 Use the volume setting from the sound source to adjust the external audio to a comfortable listening level Stop here if you do not plan to connect the PMC 2X to an external FRS GMRS or PMR 2 way radio or cell phone Otherwise proceed to section 6 for 2 w2. EEE PMC 2X Specifications FRS radio IN OUT jack Impedances 1k 16 Ohms Headphone Impedance 16 or 32 Ohms PTT input jack NO PTT SW Mic Impedance 600 Ohms Unidirectional AUX input jack Stereo L R inputs 10 10 Ohms Electret Condenser Controls High Low Volume adjust Housing Material Cases and headset both high button OFF Intercom switch impact ABS plastic Connectors Passenger Driver Aux in Ext PTT Size 4 0 x 2 75 x 65 102 x 70 x 17 mm 2 way Radio 3 5mm TRS jacks 5 VDC input Weight 3 1 oz 79 grams 3 5mm TS jack TIP NEG Batteries 3 AAA 1 5V Batteries Audio Output to Headphone 150mW 16 32 Ohms Specifications subject to change without notice PLEASE READ BEFORE USING YOUR PMC 2X Before you connect your intercom earphone and mic it is important to make sure that the metal parts of the plug and jack are clean and dry especially in cold weather To prevent dirt or moisture from damaging your intercom always wipe the metal part of the plugs with a clean dry cloth before plugging in We also suggest that you use a tuner cleaner spray available at any electronics supply store to spray the plugs and jacks once a month to keep the contacts clean SERVICE FOR YOUR NADY COMMUNICATOR U S Should your motorcycle communicator require service please contact the Nady Service Department via telephone at 510 652 2411 or e mail to service nady com for a Return Authorization R A Number and a service quote i
3. ay radio cell phone connection and operation 6 PMC 2X 2 Way Radio Cellphone Connection and Operation In order to operate your unit with your own FRS GMRS or PMR 2 way radio or cell phone please note the following a Your 2 way radio must have it s own internal VOX voice activated transmission function and a jack for connecting an external headset Radios without these features cannot be used with the PMC 2X b Your cell phone must have an external headset jack and be compatible with the optional cables available for interconnection with your PMC 2X c You must also purchase either the optional OCA XC for closed face helmets or the OCA XO for open face helmets cable assembly kit which will provide the cables headsets PTT and cable adapters to enable operation with virtually all models of properly equipped 2 way radios and cell phones If not available from your dealer please see the Optional Accessories Ordering Form included Use with 2 Way Radio Cellphones To connect to the 2 way radio or cell phone to the PMC 2X use the appropriate jumper cable PMC XC or XY see Optional Accessories Ordering Form and insert one end into the TO RADIO jack 9 and the other end into your 2 way radio or cell phone external headset jack Use the volume setting on the 2 way radio or cell phone source to adjust the audio to a comfortable listening level Using External PTT Cable To connect the external PTT push to talk button switch include
4. d with the optional OCA XC O kit to the PMC 2X use the external PTT switch cable and insert the plug into the EXT PTT jack 10 The PTT button end can be easily mounted with the Velcro strap attached on your motorcycle s handle bar for convenient control of your 2 way radio s transmission function Your 2 way radio must have its VOX turned on to use this feature You cannot use this PTT function with cell phones and do not need to as they are duplex already simultaneous 2 way conversation like the intercom Your PMC 2X is now ready for bike to bike communication with your riding partner s through your existing 2 way radio Or even safe convenient communication with anyone while riding through your cell phone Note Your 2 way radio should be kept at least 1 to 5 away from the PMC 2X to prevent possible RFI interference and ensure optimal operation
5. f out of warranty Make sure the R A Number is clearly marked on the outside of the package and enclose a cashier s check or money order if not prepaid with a credit card Ship the unit prepaid to Nady Systems Inc Service Department 6701 Shellmound Street Emeryville CA 94608 Include a brief description of the problems you are expe riencing The warranty card enclosed with this system contains additional valuable warranty and serv ice information Keep it in a safe place for future possible reference Do not attempt to service this unit yourself as it will void the warranty International For service please contact the Nady distributor in your country through the dealer from whom you purchased this product Contact your dealer or Nady Systems for more information on our complete line of advanced products for your motorcycle communication needs NADY SYSTEMS INC EnS 6701 Shellmound Street Emeryville CA USA 94608 wwe Tel 510 652 2411 Fax 510 652 5075 www nady com SYSTEMS As NADY PMC 2X Driver Passenger Personal Motorcycle Communicator OWNER S MANUAL MOTORCYCLE INTERCOM a a ET How to use the Nady PMC 2X Intercom with FRS Connection 1 Powering the PMC 2X Place 3 fresh AAA 1 5 volt batteries into Battery Compartment 1 not ing correct polarity Alkaline batteries are recommended for long duration performance If you wish to operate this unit with external power plug the optional DC
Download Pdf Manuals
Related Search