Home

Nokia BH-218

image

Contents

1. End a call Put the earpiece in the holder Tip To end a call you can also press Decline a call Press twice or put the earpiece back into the holder Switch a call between your headset and phone Press and hold for 2 seconds Mute or unmute your microphone Slide Sz The microphone is muted when the red colour shows gr When you re not in a call and the earpiece is not in the holder you can redial the last called number or use voice dialling if your phone supports these features with the headset Redial the last called number Press twice Use voice dialling Press and hold 7 for 2 seconds then follow the instructions in the user guide of your phone Pair and connect the headset to two devices When you have paired and connected your headset with one phone you can connect your headset to another phone and manage calls from for example both your personal and your work phone at the same time 1 Make sure Bluetooth is switched on in both phones 2 To switch the headset off press and hold for 5 seconds 3 Press and hold 7 for 5 seconds to switch pairing mode on then pair the headset with the second phone 4 Switch the headset off and back on The headset connects to both phones Handle calls from two phones If your headset is connected to two phones you can handle calls from both at the same time Continue an ongoing call and decline a call on another phone Press twice E
2. The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document or withdraw it at any time without prior notice To the maximum extent permitted by applicable law under no circumstances shall Nokia or any of its licensors be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The availability of particular products may vary by region Please check with your Nokia dealer for details This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited Issue 1 0 EN
3. Nokia Bluetooth Headset BH 218 User Guide Issue 1 0 About your headset With the Nokia Bluetooth Mono Headset BH 218 you can handle calls more easily than ever To answer a call just pick up the earpiece and talk The headset automatically switches on connects to your phone and answers the call The surface of this product is nickel free Warning This product may contain small parts Keep them out of the reach of small children Parts of the product are magnetic Metallic materials may be attractedto the product Do not place credit cards or other magnetic storage media near the product because information stored on them may be erased Read this user guide carefully before using the product Also read the user guide for the device that you connect to the product For more info go to www nokia com support Keys and parts Multifunction key Charger connector 1 Earpiece holder with indicator light 2 Microphone 3 Mute switch Sy 4 Earpiece 5 Clip 6 7 About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible devices such as mobile phones Devices do not need to be in direct line of sight but they must be within 10 metres 33 feet of each other The connection may be affected by obstructions such as walls or other electronic devices This device is compliant with Bluetooth Specification 2 1 EDR supporting the following profiles headset prof
4. ct charger model number may vary depending on the type of plug The plug variant is identified by one of the following E X AR U A C K or B The battery can be charged and discharged hundreds of times but it will eventually wear out Talk and standby times are estimates only Actual times are affected by for example device settings features being used battery condition and temperature If the battery has not been used for a long time to begin charging you may need to connect the charger then disconnect and reconnect it If the battery is completely discharged it may take several minutes before the charging indicator is displayed When your charger is not in use unplug it from the electrical plug and the device Do not leave a fully charged battery connected to a charger as overcharging may shorten the battery s lifetime If left unused a fully charged battery will lose its charge over time Always keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Recycle when possible Do not dispose as household waste Use the charger for its intended purpose only Improper use or use of unapproved chargers may present a risk of fire explosion or other hazard and may invalidate any appr
5. f materials 10 Crossed out wheeled bin symbol The crossed out wheeled bin symbol on your product battery literature or packaging reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste For more environmental information see the product Eco profile at www nokia com ecoprofile and other no DECLARATION OF CONFORMITY C 0560 Hereby NOKIA CORPORATION declares that this BH 218 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com global declaration 2012 Nokia All rights reserved Nokia Nokia Connecting People and Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Nokia is under license
6. ile 1 1 handsfree profile 1 5 Check with the manufacturers of other devices to determine their compatibility with this device Charge the battery Before using the headset you must charge the battery Warning Use only chargers approved by Nokia for use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous Use of unapproved chargers may present a risk of fire explosion or other hazard 1 Plug the charger into a wall outlet 2 Connect the charger cable to the charger connector on the headset The red indicator light turns green when the battery is fully charged 3 Disconnect the charger from the headset then from the wall outlet When you unplug a charger hold and pull the plug not the cord The fully charged battery has power for up to 8 hours of talk time and up to 150 hours of standby time If you keep the earpiece in the holder the standby time is up to 3 months When the battery charge is low the headset beeps every 5 minutes and the red indicator light flashes If the voice prompts are on you also hear the battery level When the battery is charging the red indicator light is on Check the battery charge Make sure the headset is switched on then press A green light means there is enough power If the light is yellow you may need to recharge the battery soon If the light is red recharge the battery Switch the headset on o
7. nd an ongoing call and answer a call on another phone Press Put an ongoing call on hold and answer a call on another phone Press and hold for 2 seconds Switch between active and held calls Press and hold for 2 seconds End an ongoing call and go back to a held call Press If you redial or use voice dialling the call is made on the phone you last used for a call with the headset Switch the voice prompts on or off Voice prompts give you verbal feedback and instructions for example when pairing your device 1 Make sure the headset is switched on and connected to your phone 2 Press and hold for 9 seconds You hear a voice prompt When you switch the voice prompts off a yellow indicator light flashes once When you switch the voice prompts on a green indicator light flashes once Clear the pairings 1 To switch the headset off press and hold for 5 seconds Press and hold 7 for 8 seconds The headset beeps twice and the red and green indicator lights alternate 3 When the headset switches on pairing mode is switched on automatically Product and safety information Battery and charger information This device has an internal nonremovable rechargeable battery Do not attempt to remove the battery from the device as you may damage the device This device is intended for use when supplied with power from the following chargers AC 3 AC 4 AC 5 AC 8 AC 11 AC 15 DC 4 and DC 9 The exa
8. oval or warranty If you believe the charger is damaged take it to a service centre for inspection before continuing to use it Never use a damaged charger Only use the charger indoors Take care of your device Handle your device charger and accessories with care The following suggestions help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that corrode electronic circuits If your device gets wet allow the device to dry Do not use or store the device in dusty or dirty areas Moving parts and electronic components can be damaged Do not store the device in high temperatures High temperatures can shorten the life of the device damage the battery and warp or melt plastics Do not store the device in cold temperatures When the device warms to its normal temperature moisture can form inside the device and damage electronic circuits Do not attempt to open the device Unauthorised modifications may damage the device and violate regulations governing radio devices Do not drop knock or shake the device Rough handling can break internal circuit boards and mechanics Only use a soft clean dry cloth to clean the surface of the device Recycle Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the recycling o
9. r off Switch on Remove the earpiece from the holder The headset beeps and a green indicator light flashes If you ve never paired the headset with a phone or you ve cleared the pairings pairing mode is switched on Pair and connect the headset with your phone within 3 minutes If you ve paired the headset before it connects to the last phone it was used with If the headset can t find that phone it tries the next phone on its list of paired devices If not connected to a phone within 30 minutes the headset switches off Switch off Put the earpiece back into the holder The headset beeps and a red indicator light flashes once All calls are ended Pair and connect the headset to your phone Before using the headset you must pair and connect it to a compatible phone 1 Make sure your headset is switched off and your compatible phone is on 2 If you ve never paired the headset with a device or you ve cleared the pairings switch the headset on If you ve previously paired your headset with another device press and hold for 5 seconds Pairing mode is switched on and a blue indicator light starts to flash quickly 3 Within 3 minutes switch Bluetooth on in your phone then set it to search for Bluetooth devices For details see the user guide of the phone 4 Onyour phone select the headset from the list of found devices 5 If asked type in the passcode 0000 When the headset is connected to a phone the Bl
10. uetooth indicator light flashes slowly You can pair your headset with 8 phones but you can only connect it to 2 phones at the same time With some phones you may need to make the connection separately after pairing Tip Can t connect the headset to a compatible phone Make sure that the headset is charged switched on and paired with the phone Wear the headset To use the headset pull the earpiece from the holder then push it gently into your ear The headset switches on automatically When you re not using your headset keep the earpiece in the holder Press the earpiece firmly into the holder so it stays in place The headset switches off automatically Tip Have your headset always at hand clip it to your pocket as you would a pen Your headset comes with different sized earpads Select the earpad that fits the best and is the most comfortable for your ear Change the earpad Pull the current earpad from the earpiece then push the new earpad into place Change the volume Set the volume on your phone That volume is used as the minimum level if the background noise where you are increases or decreases the headset changes the volume to compensate Make and receive calls To make and receive calls using your headset you need to connect it to your phone Make a call Make a call in the normal way Answer a call Remove the earpiece from the holder Tip If the earpiece is not in the holder press

Download Pdf Manuals

image

Related Search

Related Contents

QUADRI AUTOMATICI DI RIFASAMENTO tipo G3E  User Manual - About Golf  Samsung מצלמת סטילס MV900F מדריך למשתמש  MRD 3187B Manual  Cooper Lighting Metalux IA Series User's Manual  csp system top nb - Gruppo Imar S.p.A.  Fiche Technique (FT)  Sony CDX-4180FP Operating Instructions  Manual do Usuário  PREMESSA - Gramegna  

Copyright © All rights reserved.
Failed to retrieve file