Benq Universal Ceiling Mount
Contents
1. The manufacturer shall not be responsible legally for any equipment damage or personal injury caused by incorrect installation or operation not covered in this manual The ceiling mount bracket is designed for installing and removing easily The manufacturer shall not be liable to the damage of equipment and personnel injuries arising out of human factors acts of gods such as earthquake The projector hanger must be installed by2. 2 Ceiling Mounted Projector Hanger Length 116mm 578mm oc Length of Hanger From 116mm up to 578mm 116mm 578mm 398mm 578mm 22 5mm Adjustable length From 398mm to 578mm spaced at every 22 5mm 398mm 578mm 22 5mm s Application Scope of the Hanger 300mm L x 250mm W lt This product is suitable for projectors with hanging holes within a size of 300mm L x 250mm W 300mm L x 250mm W Adjusting angle Enclosed parts and accessorieSs E 00
3. Part B Part A Part C Lock the Arm bracket Part A in the projector hanging hole If the Screw with fixed washer for projector housin Rart B is too Iong lock the Ssupplied Nylon Pad Part C into the hanging hole together with the projector Part B Part A Part C NN I Tm a Dny Part D Part A Part E Part F lt Place projector bracket Part D to Arm bracket Part A and then adjust the screws and then tighten the bolt with the Flat Washer Part E and the Nyllon nut Part F Part D Part A Part E
4. 4 The ceiling should have load carrying capability to sustain more than four times the total weight of the projector and the hanger Also make sure it has enough strength to withstand earthquakes and other shocks 4 10 11 1 13 14 15 N Caution N Do not modify any accessory or use broken parts Contact the local distributors with any questionSs Tighten all screws do not exert force on any screw with excess torque to avoid breaking the screw or damaging its thread
5. 380mm Part Part G Part L Part K Part F Part L First insert the Height adjust outside pipe Part in the Ceiling mount bracket Part G and then pass the Hexagon bolt Part L through the Outer Sleeve and tighten it with the Nyllon nut Part F Lastly secure the Outer Sleeve with the Screw with Spring washer Part K Part I Part G Part L Part F Part K Part K Part J Fix Height adjust Inside pipe Part J onto the frame mounted projector with Screw Part K Part K Part J Part L Part F gt e The user can adjust the projector to the desired height and then fix the In
6. 360 lt 2 ES For turning 360 degrees to left and right 360 10 Screw with fixed washer for Nylon washer for s S projector housing 4 pcs projector housing 8 pcs Horizontal Vertical inclination angle 10 10 loinir uint nan MM HI lt The nut is used to control the tightness of the projector angle Height adjust Inflate screw M6 L 50mm outsidle pipe 1 pcs Nut The nut must be adjusted by a qualified person Screw with spring washer M4 type 7 pcs Carriage Bolt 3 pcs Button screw M4 type 1 pcs Ceiling mounted Projector hanger installation steps 1 Fix the support frame on the projector
7. Part F Note The user may adjust the rectangular hole on the arm holder to face inward or outward and also adjust the bolt position on the arm holder to be in line with the position of the hole on the projector bracke Select the desired suspension length 100mm Part K Part G When the pipe is 100mm long Fix the frame mounted projector onto Ceiling mount bracket Part G with Screw Part K 100mm Part K MM Pl Part G OM 380mm When the pipe is over 380mm long
8. professional personnel 2 At least two persons are needed to install or remove the product to avoid any hazard caused by falling objects 2 Please check carefully the areas around where the hanger is to be installed Caution HH gt Avoid any places with high temperature or humidity or subject to contact with water Do not install the product near the vents of air conditioners and avoid places where it is dusty and fumy Only install on a horizontal ceiling and avoid slanted surfaceSs Do not
9. Install the hanger on the ceiling 4 Fix Inflate Screw Part H onto the ceiling Part H DD Celling Mounted Projector Hanger Installation Manual 78P30250101A Caution 2 To ensure safety please read this manual carefully before installation and follow the instructions herein Store this manual in a secure place for future reference
10. Oo 15Kg 33 lbs The maximum weight of the ceiling projector that the hanger can support is below 15Kg 33 IDs 15Kg 33 Ibs Do not hang any other objects except the projector on this hanger Hanging on this hanger by any personnel is strictly prohibited Drill holes and screws will be left on the ceiling once the projector and hanger are removed Stains may occur after extended use Please consult the English language manual for any dispute on the terms
11. install in places subject to vibrations and shocks Do not install in places subject to direct bright light which may cause fatigue in the eyes of users when viewing the display e e Remember to maintain ample space around the projector to ensure good ventilation To ensure safety and avoid any accident it is necessary to investigate the structure of the ceiling and select an appropriate and durable location before installation
12. ner Sleeve in the Outer Sleeve with Carriage Bolt Part L and Nyllon nut Part F Part L Part F Part M lt Finally lock Button Screw Part M on the Outer Sleeve securing outer and inner sleeves in place firmly Part M MT M Nm null niimiil Uil Install the hanger on the ceiling Part H e Part H e ae Part H Fix Inflate Screw Part H onto the ceiling nT e Place the Inflate Screw Part H on the ceiling in the foll
13. owing order Washer gt Iron Hanger Washer gt Spring Washer 3 Nut e Select screws that are suitable for each type of ceiling The enclosed Inflate Screw Part H are for installation on concrete walls only eln the case of installation on a wooden ceiling make sure it is strong enough Do not install on decorated posts or plaster boards Consult professional personnel to select appropriate screws Part H e Part H e Part H e
Download Pdf Manuals
Related Search