Fujitsu PRIMERGY RX300 S7
Contents
1. E o o o o o o o o Bank required black required if 2nd CPU is configured optional same type in Channel per CPL Bank II R1 Data blue R2 Data R3 Data R4 Data optional any type BD not used Bank 1 1 green 2 R3 Data 1st XEON CPU 2nd XEON CPU 4 6 8 Core 4 6 8 Core Rank Sparing Mode requires identical modules same capacity and technology within the same channel The available memory for applications will vary depending on configuration Please refer to the spreadsheet above Effective Memory capacity with active Rank Sparing Mode Population rule for Rank sparing mode is to achieve max available memory e g 6 DIMMs will be spread across two channels each with 3DPC Fujitsu Technology Solutions x86 PRIMERGY Server 16 of 28 Fujitsu Technology Solutions x86 PRIMERGY Serve System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Config 1 6x or 4x 3 5 HDD 3 5 DDS RDX drive Is fixed due to selection of basic unit with 6x 3 5 HDD bays fixed 26361 K1373 V101 Basic unit S26361 K1373 V401 with expandable Config 2 4x 2 5 HDD S26361 F1373 E420 Available Upgrade kits for this configuration option Upgrade kit to 8x 2 5 HDD S26361 F1373 L424 Upgrade kit to 12x 2 5 HDD S26361 F1373 L427 Upgrade kit to 4x 2 5 HDD LTO S26361 F1373 L423 Basic unit S26361 K1373 V401 with expandable Config 3 4x 2 5 HDD LTO 26361 F1373 E430 Ava2. max X times per system In one chapter you can only select as many components here 4x as the arrow indicates 4x Please note that there are information symbols which indicate necessary information For further information see http ts fujitsu com products standard_servers inc internet https partners ts fujitsu com com order supply configurators primergy_config current Pages default aspx extranet Fujitsu Technology Solutions x86 PRIMERGY Serve 2 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Configuration diagram PRIMERGY RX300 S7 System unit 1 with up to 6x 3 5 Hard disk drives Motherboard front side Memory CPU1 Channel A B 2 USB VGA LAN Frontpanel Channel D E F ES Processor Il rear side Fan 1 Fan 5 are standard Redundant power supply option Backup drive option Memory CPU2 Modular RAID Support Low profile extension slots for SCSI Controller for backup VII 3 5 SAS SATA SAS Disk Array VIII Communication Network IX Miscellaneous X Slot 1 PCle 3 x8 max 168mm 9 white colored Key included in basic unit 2X Option One CPU one memory per CPU and one PSU has to be selected for an orderable basic unit Fujitsu Technology Solutions x86 PRIMERGY Serve 3 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Configuration diag
3. Data Data Data Data optional any type blue sockets Bank Ill Data Data Data Data Data Data Data Data not used green sockets 1st XEON CPU 4 6 8 Core 2nd XEON CPU 4 6 8 Core Performance Channel Mode requires identical modules on all channels of each Bank per CPU If this mode is used a multiple of 4 identical modules has to be ordered Fujitsu Technology Solutions x86 PRIMERGY Server 15 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 4 Rank Sparing Mode 1 Rank Memory modules RDIMM not used green sockets lt m a u o 5 5 required gt 9 3 3 3 g 3 ED S S S S S S S S if 2nd CPU i fi d required if 2n is configure 5 5 B 5 5 5 UM 2 Bank I optional same type in Channel per CPL black sockets Bank Il optional any type blue sockets Bank Ill t o a o r c c c c c c c c c G G lt o o o o o o o Bank R1 1 required black R2 required if 2nd CPU is configured Bank Il R1 blue R2 optional same type Channel CPL Bank Ill R1 optional any type green R2 not used 4 Rank Memory modules LRDIMM m a c c c c c c c c c c c c c c c c
4. The 10Gb upgrade kit is delivered without SFP modules 26361 F3986 E3 for optical cables these must be ordered separately SFP Module MMF 10GbE LC Without SFP modules copper twinax cables are supported SFP module for 10 Gbit Ethernet FO cabling The SFP Module is also available as loose delivery ext LC connector S 26361 F3986 L3 max 2x per adapter Instead SFP Modules SFP twinax cables from the switch vendors may be used O This is an option if Shared Management LAN over the 10Gb port is required instead Management LAN over 1Gb A 1 Port Copper PCle Adapter 1000TX 26361 F3516 E201 Shelter Island Gigabit Ethernet Controller 1000TX LP Loose delivery with Eth Ctrl 1x1Gbit PCl e Gigabit CT DT Cu LP 26361 F3516 L201 Intel Gigabit CT Desktop Adapter S26361 F3629 E750 Shared 10Gb Management LAN Install and configure Management LAN on 10Gb Shared LAN port max 1x per 10Gb upgrade kit PCle x1 ext for RJ45 connector Cat 5 max 4x per system B 1 Port MMF PCle Adapter 1000SX S26361 F3242 E201 Sheepshead Bay Eth Ctrl 1x1Gbit PCl e Pro 1000PF LC PCle x4 ext LC connector max 4x per system C 2 Port Copper PCle Adapter 1000TX 26361 F3610 E202 D2735 2 Eth Ctrl 2x1Gbit PCle x4 D2735 2 Cu Intel Kawela based 2 port Server Adapter Loose delivery with PCle x4 Low Profile ext for RJ45 plug Cat 5 max 3x per system D 4 Port Copper PCle Adapter 1000TX 26361 F3611 E201 D2745 o Eth
5. System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Memory Configuration PRIMERGY RX300 S7 Each CPU offers 12 Slots for DDR3 Memory Modules organised in 3 Banks and 4 Channels If you need more than 12 Slots you have to configure the 2nd CPU Depending on the amount of memory configured you can decide between 4 basic modes of operation see explanation below There are 3 different kinds of DDR3 Memory Modules available UDIMM RDIMM and LRDIMM UDIMM RDIMM LRDIMM offer different functionality Mix of UDIMM RDIMM LRDIMM is not alloved RDIMM Application ____ detect multi bit errors yes 8 Independant Channel 1 2 or 3 Modules per Bank es yes offers max flexibility upgradeability capacity pee use UDIMM modules for lowest cost identical Modules Bank no yes es no If 1 5V and 1 35V DIMMs are mixed the DIMMs will run at 1 5V x8 DDC chipkill support no no Performance Mode y offers maximum performance and capacity no no yes balances security and capacity Min Memory per CPU 1 Module CPU onfiguration Max Memory per CPU 8 12 Modules CPU Memory Speed Max DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU The memory channel with the lowest speed defines the speed of all CPU channels in the system Mem Speed provided Real maximum memory bus speed depending on CPU type memory con
6. max 1x per system Local Service Display incl mount kit LSD module incl mounting kit 0 5 x 5 25 max 1x per system S26361 F2571 E27 Maintenance LAN Front management LAN Port In combination with IRMC adv pack For local maintenance console redirection Integrated in front operating panel max 1x per system Options and other peripherals For other options refer to SystemArchitect and Pricelist These options are supplied lose with the shipment For suitable peripherals for this product please refer to SystemArcitect max 2x T26139 Y3850 E10 26361 F1452 E100 REGION KIT EMEA AP For Shipments to EMEA Asia and Pacific regions 1x per system Power has to be ordered separately Power cord options 1x per PSU T26139 Y1968 E100 Powercord for rack 4m grey IEC 320 C14 connector T26139 Y1742 E10 USA Canada 1 8m grey T26139 Y4024 E10 for 48V DC PSU only 4m black specific cable orderable like e g China End PRIMERGY RX300 S7 Option no powercord for Countries without Fujitsu Technology Solutions x86 PRIMERGY Serve Status 2012 05 30 27 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Change Report Order number Changes 2012 04 23 26361 F3713 E201 new RAID Controller added 012 04 20 Memory voltage frequency spreadsheet 3DPC at 1 5V only 012 02 29 First Release Fujitsu Technol
7. external FDD available for driver installation Following USB Components are available 1 USB DVD SM Blu Ray External SuperMulti Drive 26341 F103 L126 External Blu Ray Drive S26341 F103 L127 2 USB Memorybird MyUSBS A910 8GB MLC Flash 26391 F6048 L208 MyUSBS A910 16GB MLC Flash 26391 F6048 L216 26361 F3269 E2 DVD RW supermulti slim SATA all formats DUAL DL DVD RAM 0 5 x 5 25 black bezel max 1x per system as soon as available Blu ray Triple Writer slim SATA BD DL and all CD DVD formats 26361 F3324 E7 26361 F3857 E7 Tape drive DDS 5 USB 3 5 RDX drive USB 3 5 internal V1xx 36GB 3MB s USB 2 0 80 320GB 25MB s USB 2 0 1 6 x 3 5 black bezel 1 6 x 3 5 black bezel within a tape cage within a tape cage incl description Ger US incl description Ger US cleaning cartridge without RDX cartridges occupies 2 x 1 hard disk bays occupies 2 x 1 hard disk bays max 1x per system max 1x per system 26361 F3324 E5 26361 F3325 E2 526361 3857 5 Tape drive DDS 5 USB 3 5 Tape drive DDS Gen6 USB 3 5 RDX drive USB 3 5 internal 36GB 3MB s USB 2 0 80GB 6MB s USB 2 0 80 320GB 25MB s USB 2 0 Only for basic unit Connector USB B Connector USB B Connector USB B with USB cable with USB cable with USB cable incl description Ger US incl cleaning cartridge incl description Ger US cleaning cartridge without data cartridge without RDX cartridges 1 6 x 3 5 b
8. 12 16x per system 26361 F4541 E200 SSD 200GB SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F3708 E500 HD 500GB 7 2krpm 2 5 7200rpm lt 9 5ms 64MB Cache BC SATA 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F4482 E514 HD 146GB 15krpm 2 5 15000rpm lt 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F4482 E145 HD 450GB 10krpm 2 5 10000rpm lt 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system PCle SSD occupies PCle slot as soon as available 26361 F4522 E781 PCle SSD 781GB MLC ioDrive2 781GB PCle 2 0 PCle x4 Low Profile max 2 per system Fujitsu Technology Solutions x86 PRIMERGY Serve 26361 F4522 E121 PCle SSD 1 2TB MLC ioDrive2 1 2 TB PCle 2 0 PCle x4 Low Profile max 2 per system System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 No mix of 2 5 BC SATA HDD and 2 5 10K SAS HDD 26361 F4555 E400 SSD SATA 400GB MLC Solid State Disk SATA 3Gb s Mainstream Perfomance hot plug hot replace tray max 8 12 16x per system 26361 F4541 E400 SSD 400GB SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F3708 E100 HD 1000GB 7 2krpm 2 5 7200rpm lt 9 5ms 64MB Cache BC SATA 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F4482 E530 HD 300GB 15krpm 2 5 15000rpm lt 4 5ms 8MB Ca
9. Ctrl 4x1Gbit PCle x4 D2745 Cu PCIe x4 low profile ext for RJ45 plug Cat 5 max 3x per system E 10GbE 2 Port SFP for MMF Module 4x 2 26361 F3629 E202 D2755 10 Gigabit Ethernet Contr dual port SFP Eth Ctrl 2x10Gbit PCle x8 D2755 SFP PCle x8 Low Profile Low Profile Bracket ext 2x SFP cage max 2x per system 26361 F3986 E3 The SFP Module is also available as loose delivery SFP Module MMF 10GbE LC 26361 F3986 L3 SFP module for 10 Gbit i Ethernet FO cabling ext LC connector max 2x per adapter The controller is delivered without SFP modules for optical cables these must be ordered separately Without SFP modules copper twinax cables are supported The adapter is also available as loose delivery with FH and LP bracket included S26361 F3629 L502 Instead SFP Modules SFP twinax cables from the switch vendors may be used Fujitsu Technology Solutions x86 PRIMERGY Serve 25 of 28 m gt lt F Fibre Channel over Ethernet 26361 F3592 E202 10GBit s CNA Emulex OCe10102 2 channel 10GBit sec CNA SFP Cage PCle x8 170mm max 2 per system 526361 3592 108 SFP Module MMF 10GbE LC SFP module for 10 Gbit Ethernet FO cabling ext LC connector max 2x per adapter G Infiniband HCA s 26361 F4475 E102 IB HCA 40Gb 1 port QDR IB HCA 1x 40Gb PCle 2 0 5 0GT s PCle x8 low profile ext 1x QSFP connector max 2x per sy
10. Details eg version numbers are published on the page referred to Q Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under Manageability Software V https partners ts fujitsu com com products software cluster 20technology primecluster Pages default aspx IRMC advanced Pack only RemoteView Software EM 64T RemoteView Service Board RemoteView Diagnosis RemoteDeploy Pay attention to release and order information in PRINCE gt Operating System https partners ts fujitsu com com products servers primergy Pages default aspx Q roses secos sr senes vos rec PBC Sarwar for internal users http sp ts fujitsu com dmsp docs osrel xlsx for partners https partners ts fujitsu com com products servers primergy Pages default aspx Fujitsu Technology Solutions x86 PRIMERGY Server System configurator and order information guide PRIMERGY RX300 57 Status 2012 05 30 System unit consisting of 2U Housing without power supply modules Basic units with 2 Hot Plug Power Supply Bays 5 Fans full redundancy SAS Backplane for 6x 3 5 HD or SAS Backplanes for 4 8 12 or 16x 2 5 HD with cable connection to on board or modular RAID Controller Drives Bays 6 bays 1 for hot plug 3 5 HD 1 high or 4 8 12 or 16 bays for hot plug 2 5 HD 1 bay for 3 5 and 1 6 high Backup device consumes 2 bays for 3 5 HD for basic unit 6x
11. incl ServerStart ServerBooks Management Software and Updates Documentation engl multilingual on CD Fujitsu Technology Solutions x86 PRIMERGY Serve 7 of 28 System configurator and order information guide 3 PRIMERGY RX300 S7 Status 2012 05 30 Cables included in basic unit EonnecHonc Cup DUI NI B i SAS 1 SATA DVD SATA l l 2 18 cables to HDDs L 3 11x cable for SAS signaling i Note Rack Mounting kit and Power Cord for RX300S7 is included in the basic unit and has to be configured separately Rack version for 19 racks with No PSU included in Base Unit Basic unit with 2 5 HDD bays is modular expand Basic unit is without CPU and Memory able with various modules for backup devices For an orderable basic unit one CPU first CPU and integration or up to 16x 2 5 HDDs Details and pictures see Section Va one memory first memory has to be selected Basic unit with Possible configuration options for basic units 6x 3 5 HDD bays fixed S26361 K1373 V101 Basic unit with Full redundancy cannot be guaranteed for a max 2 5 HDD bays expandable 26361 K1373 V401 config with e g two 135W CPUs with 450W PSUs Basic unit with In this case SysArch will generate a warning and 8x 2 5 HDD bays fixed S26361 K1373 V201 Power Safeguard will throttle CPUs Basic unit with in case of a PSU failure 12x 2 5 HDD bays fixed S26361 K137
12. 3 5 HD not possible for basic unit with 12 or 16 x 2 5 HD 1 bay for 5 25 and 1 6 high Backup device not possible for basic unit 6x 3 5 HD for basic unit with 12 or 16 x 2 5 HD 1 bay SATA CD or DVD ROM 0 5 height option 1 bay for opt LocalView LC Display Integrated ServerView Diagnostics Technology Diagnosis LED s for indication of internal failed components Systemboard D2939 with Up to two Xeon 4 6 amp 8 CPU s Socket R with 2 serial QPI links Quick Path Interconnect and four memory channels per CPU First CPU has to be selected for an orderable basic unit Chipset Intel C600 Series codenamed Patsburg 7 PCI slots 2x PCle 3 x16 both slots are connected to CPU 2 and are useable with configured 2nd CPU only 4x PCle 3 x8 one notched to install x16 cards 1x PCle 3 x8 for internal modular RAID controller only 24 memory slots for max 768GB RAM DDR3 available Memory is divided into 12 DIMMs per CPU 4 channels with 3 slots per channel Possible max configurations are 24x 32GB LRDIMM quad rank modules 768GB 24x 16GB RDIMM dual rank modules 384GB 16x 8GB UDIMM dual rank modules 128GB First Memory one module has to be selected for an orderable basic unit per CPU Memory upgrade is possible module wise Memory mirrroring is supported with 2 identical modules in channel A B CPU 1 or D E CPU 2 Hot Spare Memory is supported with 3 identical modules in channel A B C
13. 3 V301 So power consumption will be limited to 450W as soon as available June 2012 S26113 F575 E10 S26113 F574 E10 S26113 F609 E10 450W PSU module platinum 800W PSU module platinum 800W PSU module 48V DC gold 1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy 1st or 2nd PSU for redundancy 92 efficiency gold uses hot plug PSU slot min 1 max 2x per system 94 efficiency platinum uses hot plug PSU slot min 1 max 2x per system 94 efficiency platinum uses hot plug PSU slot min 1 max 2x per system For later redundancy upgrade the following kit is available One 450W power supply module hot plug no power cable included no power cable included One 800W 48V DC PSU hot plug 26113 F609 L10 fe Please order appropriate power cord additionally Powercord for rack 4m grey IEC320 C13 gt C14 connector T26139 Y1968 L10 Power Cord USA Canada 1 8m grey T26139 Y1742 L10 Power Cord 48V DC 4m black T26139 Y4024 L10 26113 F574 E99 Power Supply Dummy must be ordered if 1x PSU only hot plug power supply max 1x per system o For order completeness only Not shown in system architect Version V9 2 Trusted Platform Module on Motherboard Use according to import restrictions max 1x per system Be aware of import restrictions Loose delivery for later integration possible for customer Fujitsu Techn
14. CPU 1 or D E F CPU 2 SDDC Chipkill is supported for memory modules Dual Port 10 100 1000 x4 PCI Express Gigabit Ethernet Intel LAN controller Powerville on board iRMC S3 integrated Remote Management Controller on board server management controller with dedicated 10 100 1000 Service LAN port and integrated graphics controller The Service LAN port can be switched alternatively on standard Gbit LAN port 1 Graphics Controller integrated in iRMC S3 integrated Remote Management Controller 1600x1200x16bpp 60Hz 1280x1024x16bpp 60Hz 1024x768x32bpp 75Hz 800x600x32bpp 85Hz 640x480x32bpp 85Hz 1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off Interfaces at the rear 1x RS 232 C serial 9 pins usable for BMC or OS or shared 1x VGA 15 pins 4x USB 2 0 UHCI with 480MBit s no USB wakeup 2x LAN RJ45 1x Service LAN RJ45 Interfaces on the front 2x USB 2 0 UHCI with 480MBit s no USB wakeup 1x VGA 15 pins as an option 1x Service LAN RJ45 as an option Interfaces internal 1x released internal USB Interfaces for backup devices 1x USB 2 0 UHCI with 480MBit s for dongle funcionality USSD memory no USB wakeup 1x SATA interface for DVD only usable with 4x 2 5 HDD DVD Option Ax SATA SAS interface for 4 SATA SAS HD s or SAS Backup device 2x USB 2 0 ports for internal USB redirection connected to BMC Software ServerView Suite Software package
15. ERGY RX300 S7 Status 2012 05 30 1 Independent Channel Mode lt m a ul x z 5 required gt 3 3 2 3 ED c S 5 S T i 2 5 5 5 E 5 5 5 required if 2nd CPU is configured Bank optional same type in Bank per CPU black sockets Bank II 2 Mirrored Channel Mode required Channel D hannel E hannel G Channel required if 2nd CPU is configured Bank black sockets Bank Il Data Mirror Data_ Mirror Data Mirror pata Mirror blue sockets Bank III Data Mirror Data_ Mirror Data Mirror pata Mirror green sockets Channel H optional same type in Bank per CPU not used o t XEON CPU 4 6 8 Core 2nd XEON CPU 4 6 8 Core Mirrored Channel Mode requires identical modules on channel C D 1st CPU or channel E F G and 2nd CPU 50 of the capacity is used for the mirror gt the available memory for applications is only half of the installed memory If this mode is used a multiple of 4 identical modules has to be ordered 3 Performance Channel Mode m a x D m required B 3 P 8 P 3 3 CD S S S S S S S S if 2nd CPU i fi d E required if 2n is configure 5 8 65 6 5 5 5 9 Bank optional same type in Bank per CPU black sockets Bank Il Data Data Data
16. FUJITSU PRIMERGY RX300 57 System configurator and order information guide Contents Instructions Configuration diagram Configurator System software Basic unit Il Processor Ill Memory IV Graphics V Accessible drives VI Hard disk drives VII PCI Controller VIII Communication Network IX System Management Products RemoteView X Miscellaneous Country specific power cord Change report PRIMERGY Server System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC System Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system You can configure your individual PRIMERGY server in order to adjust your specific requirements The System configurator is divided into several chapters that are identical to the current price list and PC SystemArchitect Please follow the lines If there is a junction you can choose which way or component you would like to take Go through the configurator by following the lines from the top to the bottom There are X memory slots which be equipped with XXX MB It is permissible to make up to X passes through the memory upgrade options 26361 XXX XXX Memory XXX MB max X times per system 26361 XXX XXX Memory XXX MB
17. Server XenCenter Management Server for any server released for Windows 2000 XP Vista and Server 2003 2008 XenServer and Essentials for XenServer released for RX200S5 RX300S4 S5 RX600S4 BX620S4 S5 BX920S1 Microsoft Hyper V Server and System Center Microsoft System Center Virtual Machine Manager Workgroup Edition for any server released for Windows Server 2008 R2 Microsoft System Center Essentials Management Suite for any server released for Windows Server 2008 SP2 Microsoft Hyper V Server 2008 R2 Microsoft Windows Server 2008 R2 Server Licenses Linux Software Windows HPC Server 2008 R2 Suite Open Enterprise Server Windows Server 2008 R2 Datacenter SuSE Linux ES OEM LO Windows Server 2008 R2 Enterprise Red Hat EL OEM LO Windows Server 2008 R2 Standard Windows Web Server 2008 R2 Microsoft Windows Server 2008 Server Licenses Windows Server 2008 Datacenter PRIMECLUSTER Windows Server 2008 Enterprise Clustering Windows Server 2008 Standard Load Balancing Windows Web Server 2008 Microsoft Windows Server 2008 Client Access Licenses QuickTransit QT Windows Server 2008 Device CAL Transition Solaris Apps Windows Server 2008 User CAL EM64T to x86 64 PY with Linux Windows Server 2008 Remote Desktop Services Device CAL Windows Server 2008 Remote Desktop Services User CAL MultiPath Duplex Data EM64T Manager DDM Windows Linux W DDM
18. cal modules 4 In the Mirrored Channel Mode is following configuration possible Each memory bank can optionally be equipped with 4x registered or load reduced or unbuffered DDR3 modules In each memory bank channel A and B C and D of CPU 1 or channel E and F G and of CPU 2 have to be equipped with identical modules for mirrored channel mode In channel B D is always the mirrored memory of channel A B of CPU 1 In channel F H is always the mirrored memory of channel E G of CPU 2 Minimum configuration is 4x identical modules This mode is not supported by unbuffered memory modules Fujitsu Technology Solutions x86 PRIMERGY Server 12 of 28 System configurator and order information guide A PRIMERGY RX300 57 Status 2012 05 30 S26361 F3694 E10 Independent Mode Independent Channel Mode allows all channels to be populated in any order No specific Memory RAS features are defined Requires min 1 memory Module per CPU 26361 F3694 E1 Rank Sparing Mode Installation BIOS Setup factory preinstalled to this mode One Rank is spare of other ranks on the same channel Spare Rank is not shown in System Memory For effective capacity within a channel please have a look below Supported for RDIMM LRDIMM only 1x per CPU Requires min 2x 1R 2R or 1x 4R modules per CPU 26361 F3694 E2 Performance Mode Installation BIOS Setup factory preinstalled for max Performance LV memory might be set to 1 5V ope
19. che SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 526361 4482 160 HD 600GB 10krpm 2 5 10000rpm lt 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system No mix of 781GB and 1 2TB SSD possible 21 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 On board SATA Controller with 3 Gb sec and up to 4x 2 5 SATA HDDs no additional controller required For up to 4x 2 5 SAS HDDs with RAID 0 1 functionality a Patsburg Upgrade Kit is required For all other HDD configurations a modular RAID controller is required Following optional onboard SAS RAID can be selected for 4x2 5 HDDs or one SAS Tape device 26361 F3674 E1 LSI RAID 0 1 amp 10 SAS 1 0 3Gb sec 4 internal ports PCle x4 no PCI slot required max 1x per system For more than 4 hard disks or 6 Gb sec one of the following modular RAID controllers is required O Modular Raid 0 1 controller with IME support for SAS SATA _________ This RAID controller supports max 8 HDDs on internal SAS ports Modular Raid 5 controller for SAS SATA The FBU is an option for the controller which can be used once per controller supported This RAID controller supports max 16 HDDs S26361 F3554 E8 S26361 F3554 E512 Based on chip LSISAS2008 Based on chip LSISAS2108 Based on chip LSISAS2208 LSI MegaRAID LSI MegaRAID no Cache no BBU 512MB Cache with ECC 1GB Cache
20. d depending on memory type population one DDR3 registered ECC mem Module 1 35V please check the spreadsheet Memory speed below No mix with any other types of memory modules possible Choose up to 12x for 1R 2R or 8x for 4R per CPU For performance reasons we do not recommend to configure more than 8 DIMMs per CPU 4GB 1x4GB 2Rx8 L DDR3 1600 R ECC 26361 F3695 E514 Registered Memory RDIMM with SDDC chipkill support 8 12x per one DDR3 registered ECC mem Module 1 35V CPU max 1333MHz supported with up to 2DPC 8 modules CPU 2 3 modules Choose up to 12 order codes per CPU per channel 4GB 1x4GB 1Rx4 L DDR3 1333 R ECC S26361 F3696 E514 new due to supply 8GB 1x8GB 2Rx4 L DDR3 1333 R ECC S26361 F3696 E515 new due to supply Registered Memory RDIMM with SDDC chipkill support one DDR3 registered ECC mem Module 1 35V 1600MHz supported with up to 2DPC 8 modules CPU at 1 5V Choose up to 12 order codes per CPU 4GB 1x4GB 1Rx4 L DDR3 1600 R ECC 26361 F3697 E514 8GB 1x8GB 2Rx4 L DDR3 1600 R ECC 26361 F3697 E515 16GB 1x16GB 2Rx4 L DDR3 1600 R ECC 26361 F3697 E516 Load Reduced Memory LRDIMM with SDDC chipkill support one DDR3 load reduced ECC mem Module 1 35V Choose up to 12 order codes per CPU 16GB 1x16GB 4Rx4 L DDR3 1333 LR ECC S26361 F3698 E516 as soon as available 32GB 1x32GB 4Rx4 L DDR3 1333 LR ECC S26361 F3698 E517 as soon as available Po G Fujitsu Technology Solutions x86 PRIMERGY Server 13 of 28
21. dual head operation and fully 3D video support The cables for either two times DVI I or VGA cable kit connections are part of the delievery Remote Video direction via iRMC must be disabled This PCle x1 card can also be installed in any PCle x4 x8 or x16 slot Only one card per server is allowed S26361 F2748 E637 NVIDIA NVS300 512 MB PCle x1 Connectors 1x LFH 59 cable kit for 2x DVI or 2x VGA cable kits included Dual head professional 2 D 3 D supported for Windows OS native driver support for Linux OS low profile bracket max 1x per system 26361 F2748 L637 PY VGA LP card 512MB PCl e x1 for loose delivery Fujitsu Technology Solutions x86 PRIMERGY Serve 11 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 There are 12 memory slots per CPU for max 384GB LRDIMM 12x 32GB 4R 192GB RDIMM 12x 16GB 2R 32GB UDIMM 8x 4GB gt max 768GB for two CPU s 384GB per CPU using LRDIMM The memory area is divided into 4 channels per CPU with 3 slots per channel Slot 1 of each channel belongs to memory bank 1 the slot 2 belongs to memory bank 2 slot 3 belongs to memory bank 3 Registered LR DIMMs and unbuffered memory modules can be selected No mix of registered load reduced and unbuffered modules allowed Memory can be operated at 1 5V or 1 35V even if the modules are of low voltage type Memory operating voltage can be set within BIOS 1 5V is defaul
22. eon 5 10 15MB Smart Cache Hyper Threading HT 1600 MHz DDR3 Bus 6 40 7 20 GT s QPI Bus and passive heat sink occupies socket for one CPU Xeon E5 2637 2C 4T 3 00GHz 5MB 6 40GT s 1600MHz 80W 526361 3687 300 Xeon 5 2643 4C 8T 3 3GHz 10 6 40GT s 1600MHz 130W 526361 3687 330 Xeon E5 2667 6C 12T 2 90GHz 15MB 7 20GT s 1600MHz 130W 26361 F3687 E290 Low Power 4C 6C 8C CPU s 1x 64 bit Intel Xeon 15 20MB Smart Cache Hyper Threading HT 1333 1600 MHz DDR3 Bus 7 20 8 00 GT s Bus and passive heat sink occupies socket for one CPU Xeon E5 2630L 6C 12T 2 00GHz 15MB 7 20GT s 1333MHz 60W 26361 F3688 E200 Xeon E5 2650L 8C 16T 1 80GHz 20MB 8 00GT s 1600MHz 70W S26361 F3688 E180 max DDR3 Bus Speed from the CPU and max DDR3 Memory Speed and max memory modules on one memory channel Fujitsu Technology Solutions x86 PRIMERGY Serve 10 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Graphics Controller integrated in iRMC S3 integrated Remote Management Controller 1600x1200x16bpp 60Hz 1280x1024x16bpp 60Hz 1024x768x32bpp 75Hz 800x600x32bpp 85Hz 640x480x32bpp 85Hz 1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off S26361 F2571 E26 Optional Front VGA for Onboard Controller only consists of internal cable and front VGA connector max 1x per system The hight end optional NVIDIA NVS300 graphic card offers
23. ery as 26361 F3996 L101 QSFP 40Gb 1m 26361 F3996 L103 QSFP 40Gb 3m loose delivery S26361 F4475 L202 Low Profile PCle form factor with exchangeable Full Height FH or Low Profile LP bracket If additional length of copper cable or optical cable are needed then they must be ordered from the cable vendor directly Copper cable are also available for loose delivery as 26361 F3996 L101 QSFP 40Gb 1m 26361 F3996 L103 QSFP 40Gb 3m loose delivery S26361 F4533 L102 202 Low Profile PCle form factor with exchangeable Full Height FH or Low Profile LP bracket No mix and match of different IB HCA 40Gb and 56Gb possible If additional length of copper cable or optical cable are needed then they must be ordered from the cable vendor directly Copper cable are also available for loose delivery as 26361 F3996 L561 QSFP 56Gb 1m 26361 F3996 L563 QSFP 56Gb 3m Fujitsu Technology Solutions x86 PRIMERGY Serve 26 of 28 System configurator and order information guide PRIMERGY RX300 S7 iRMC S3 integrated Remote Management Controller onboard server management Controller with dedicated 10 100 1000 Service LAN port and integrated graphics Optional 10 100 Service LAN port on front panel The Service LAN port can be switched alternatively on standard Gbit LAN port 26361 F1790 E242 integrated remote management controller activation key for graphical console redirection and remote media redirection
24. figuration DPC by CPU and voltage setting BIOS UDIMM 1600MHz RDIMM 1600MHz LRDIMM 1333MHz ing CPU with 1600MHz DDR3 Bus 1600 1066 1333 066 066 isss 1066 CPU with 1066MHz DDR3 Bus 1066 1066 1066 1R Single Rank 4R Quad Rank as soon as available 1DPC 1 DIMM per Channel 2DPC 2 DIMM per Channel 3DPC 3 DIMM per Channel 066 066 1 1 Configuration hints The memory sockets on the systemboard offer a color coding Bank black sockets Bank blue sockets Bank green sockets Aso called Bank consits of 1 memory module on every Channel available on one CPU examples see below Bank I on CPU 1 2 up to 4 memory modules connected to Channel A H on the 1st 2nd CPU Bank Il on CPU 1 2 up to 4 memory modules connected to Channel A E on the 1st 2nd CPU Bank Ill on CPU 1 2 up to 4 memory modules connected to Channel A E on the 1st 2nd CPU can not be populated by UDIMM or 4R RDIMM memory modules See below and next page for a detailed descriptions of the memory configuration supported Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 28 System configurator and order information guide optional any type blue sockets Bank 111 green sockets 1st XEON CPU 2nd XEON CPU 4 6 8 Core 4 6 8 Core Independent Channel Mode allows all channels to be populated in any order Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system PRIM
25. ilable Upgrade kits for this configuration option Upgrade kit to 8x 2 5 HDD S26361 F1373 L436 Basic unit S26361 K1373 V201 with Config 4 8x 2 5 HDD bays fixed S26361 K1373 V201 Available Upgrade kits for this fixed configuration Upgrade kit to 12x 2 5 HDD S26361 F1373 L247 Upgrade kit to 16x 2 5 HDD S26361 F1373 L248 Basic unit S26361 K1373 V401 with expandable Config 5 8x 2 5 HDD 3 5 drive 26361 F1373 E450 No Upgrade kit available Basic unit S26361 K1373 V401 with expandable Config 6 8x 2 5 HDD LTO 26361 F1373 E460 no ODD and LSD bay available No Upgrade kit available Basic unit S26361 K1373 V301 with Config 7 12x 2 5 HDD bays fixed S26361 K1373 V301 Available Upgrade kits for this fixed configuration Upgrade kit to 16x 2 5 HDD S26361 F1373 L378 Basic unit S26361 K1373 V401 with expandable Config 8 16x 2 5 HDD 26361 F1373 E480 no ODD and LSD bay available No Upgrade kit available Includes all necessary bezels cages backplanes and cables 17 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Setup RX300 S7 by ServerStart is supported with following configurations no DVD no CD remote installation only PXE service amp DHCP server required built in CD DVD or USB CD DVD disk drive UNC Network share reachable or USB Floppy connected USB Floppy no CD DVD USB CD DVD connected If installation is done locally make sure you have
26. lack bezel 1 6 3 5 black bezel 1 6 x 3 5 black bezel max 1x per system max 1x per system max 1x per system RDX cartridges must be ordered separately RDX 160GB S26361 F3857 L160 RDX 320GB S26361 F3857 L320 RDX 500GB S26361 F3857 L500 RDX 1TB S26361 F3857 L600 10x RDX160 S26361 F3857 L169 10x RDX320 S26361 F3857 L329 as soon as available Fujitsu Technology Solutions x86 PRIMERGY Serve 18 of 28 System configurator order information guide PRIMERGY RX300 S7 Status 2012 05 30 SAS Controller for internal Backup Drives Onboard 4 port SAS Controller an additional 4 port SAS controller has to be configured LSI RAID 0 1 amp 10 SAS 1 0 3Gb sec no PCI slot required 526361 3626 2 26361 F3627 E1 26361 F3561 E4 Tape drive LTO3HH Ultrium SAS Tape drive LTO4 HH SAS IBM V2 Tape drive LTO5HH Ultrium SAS 400GB 60MB s SAS 3Gb 800GB 120MB s SAS 6Gb 1500GB 140MB s SAS 6Gb Connector mini SAS Connector mini SAS Connector mini SAS incl SAS cable incl SAS cable incl SAS cable incl cleaning cartridge incl cleaning cartridge incl cleaning cartridge without data cartridge without data cartridge 1 6 5 25 1 6 5 25 max 1x per system max 1x per system Only for basic unit V4xx without data cartridge 1 6 5 25 black bezel max 1x per system Fujitsu Technology Solutions x86 PRIMERGY Serve 19 of 28 System configurator orde
27. loose delivery please order 26361 F3669 E125 with 16cm cable set 26361 F3257 L210 Flash Backup Unit max 1x per Controller with 25cm cable set max 1x per Controller Lose delivery FBU option as soon as available 26361 F3669 L110 Flash Backup Unit with 25 55 70 cable set max 1x per Controller PRIMERGY RX300 S7 Status 2012 05 30 as soon as available Fujitsu Technology Solutions x86 PRIMERGY Serve 24 of 28 System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Modular On Board LAN is a flexible extension of a cost optimized Motherboard with basic 2x Gbit LAN on board 3 different Upgrade Kits are offered which consume a dedicated PCle slot and can be ordered once per system Every Upgrade Kit is supported with special TP reduction NEW Modular On Board LAN Adapter S26361 F3610 E702 S26361 F3611 E701 Upgrade Kit to 4x Gbit LAN on board Upgrade Kit to 6x Gbit LAN on board 26361 F3629 E702 Upgrade Kit to 2xGbit 2x10Gbit LAN on board Eth Ctrl 2x10Gbit PCle x8 D2755 SFP PCle x8 Low Profile Low Profile Bracket ext 2x SFP cage max 1x per system Eth Ctrl 2x1Gbit PCle x4 D2735 2 Cu Eth Ctrl 4x1Gbit PCle x4 D2745 Cu Intel Barton Hills based 4 Port Server Ad Intel Kawela based 2 port Server Adapter PCle x4 low profile PCle x4 Low Profile ext for RJ45 plug Cat 5 ext for RJ45 plug Cat 5 max 1x per system max 1x per system
28. net under https partners ts fujitsu com com products software cluster 20technology primecluster Pages default aspx Pay attention to release and order information in PRINCE gt Operating System https partners ts fujitsu com com products servers primergy Pages default aspx Backup Software Application Software U ARCserve openSM2 22 2372 Supply over distribution or procurement from FSC VP BC Software for internal users http sp ts fujitsu com dmsp docs osrel xlsx for partners https partners ts fujitsu com com products servers primergy Pages default aspx Fujitsu Technology Solutions x86 PRIMERGY Server PRIMERGY Software Configurators and Release Lists Start PRIMERGY RX300 S7 PRIMERGY RX300 S7 Status 2012 05 30 with OEM Software without OEM Software for PRIMERGY Server for PRIMERGY Server OEM SW is bound to HW and For all SW products please refer to the corresponding is not allowed to be ordered software configurator accessible via the Extranet under separately Exceptions VMware SW Citrix XenServer Configuration amp Tools All configurations Software URL see below VMware Software VirtualCenter Management Server for any server released for Windows Server 2003 Virtual Infrastructure 3 for PRIMERGY gt except all mono PRIMERGY systems ESX2 for PRIMERGY RX TX300S2 RX TX600S3 BX620S2 BX630 Dual Quad BX630 8 way Citrix XenServer Essentials for Xen
29. ogy Solutions x86 PRIMERGY Serve 28 of 28
30. ology Solutions x86 PRIMERGY Serve 8 of 28 PRIMECENTER Rack S26361 F2735 E175 telescopic drop in rail full extr RMK 1 pair consisting of vario carrier length variable with quick release lever support telescopic drop in rails with CMA adapter 1x per system 26361 F4530 E11 Mounting 1U server in asymmetrical racks with 1U support bracket 26361 F2735 E71 Lateral cable management for 2U servers or higher for asymmetrical racks PRIMECENTER S2 or M1 1 bracket PC Rack asym 1x per system SNP SY F1647E301 P Installation ex works for one server or subsystem Hereby the rack will be delivered completely pre mounted and all wired connections are tested With PCR S2 12U 24U 38U and PRC M1 16U 24U 42U Systems and components will be delivered installed in the rack With PCR S2 racks 46U Systems and components will be delivered separately To be ordered only together with a PRIMECENTER rack PCR S2 e g S26361 K826 V10x new PCR 1 e g S26361 K827 Vxxx refer PCR S2 or M1 rack configurator max 1x per System No Rackmount Kit option No mounting in racks possible max 1x per system 26361 F4530 E10 Mounting in symmetrical racks no support bracket needed 26361 F2735 E82 2U cable management arm CMA for 2U Server for symmetrical racks M1 or 3rd party racks Fujitsu racks 1x per system Fujitsu Technology Solutions x86 PRIMERGY Serve System configura
31. per system S26361 F3961 E201 Emulex 1 channel 8GBit sec FC Controller 8GBit s FC Controller Emulex LPe12002 low profile bracket max 4x per system Fujitsu Technology Solutions x86 PRIMERGY Serve Status 2012 05 30 All controllers for the connection of external storage system are delivered without cables For the configuration of external cabling see the configurator for external storage system For Fibre Channel SAN also other componets like S26361 F3631 E202 switches SFPs and optical wires are orderable 8GBit s FC Controller for details see price liste 2 channel 8GBit sec FC Controller Component S26361 F3631 L201 LC Interface for 50um Fiber PCle x8 170mm Loose Component S26361 F3631 L202 2 channel 8GBit sec FC Controller Loose Component S26361 F3961 L201 LC Interface for 50um Fiber PCle x4 170mm Loose Component S26361 F3961 L202 23 of 28 System configurator and order information guide SAS RAID controller for JBOD subsystems S26361 F3593 E201 S26361 F3713 E201 LSI LSI MegaRAID SAS 9285 8e 512MB Cache with ECC RAID 0 1 5 6 10 50 amp 60 RAID 0 1 10 5 50 6 amp 60 without FBU without iBBU SAS 6Gb sec SAS 6Gb sec 8 port external PCle x8 MD2 form factor low profile bracket low profile bracket max 1x per system max 1x per system 26361 F3257 E216 BBU max 2x per system possible Cache Battery Backup Unit for
32. r information guide PRIMERGY RX300 S7 Status 2012 05 30 Modular Raid controller is connected to internal HDDs For basic units V1xx up to 6 SAS 3 5 hard disks can be configured also in mixed configuration If the option Tape drive is configured only 4 bays for hard disks are available Mixed configurations with Eco SATA drives and SAS drives are not allowed 3 5 SAS drives and 3 5 BC SATA drives can be mixed but not used in one logical RAID volume 26361 F3700 E500 26361 F3700 E250 HD 250GB 7 2krpm 3 5 ECO HD 500GB 7 2krpm 3 5 ECO 7200rpm lt 9 0 ms 8MB Cache 7200rpm lt 9 0 ms 8MB Cache SATA 6Gb s Economy SATA 6Gb s Economy hot plug hot replace tray hot plug hot replace tray max 6x per system max 6x per system 26361 F4005 E530 S26361 F4005 E545 26361 F4005 E560 HD 300GB 15krpm 3 5 HD 450GB 15krpm 3 5 HD 600GB 15krpm 3 5 15 000rpm lt 4ms 8MB Cache 15 000rpm lt 4ms 8MB Cache 15 000rpm lt 4ms 8MB Cache SAS 6Gb s SAS 6Gb s SAS 6Gb s hot plug hot replace tray hot plug hot replace tray hot plug hot replace tray max 6x per system max 6x per system max 6x per system 6x 4x with Backup drive for basic unit V1xx 26361 F3670 E500 26361 F3294 E200 HD 500GB 7 2krpm 3 5 HD 2000GB 7 2krpm 3 5 7200rpm lt 9 0 ms 64MB Cache 7200rpm lt 9 0 ms 8MB Cache BC SATA 6Gb s BC SATA 3Gb s hot plug hot replace tray hot plug hot replace tray max 6x per system max 6x per
33. ram PRIMERGY RX300 S7 System unit 1 with up to 4 8 12 or 16x 2 5 Hard disk drives Motherboard front side Memory CPU1 Channel A B c 2 USB VGA LAN Frontpanel Channel D E F essible drives V emory Processor Il rear side Fan 1 Fan 5 are standard Backup drive option 1 Memory CPU2 Redundant power supply option Modular RAID Support Backup drive option 2 Low profile extension slots for SCSI Controller for backup VII SAS Disk Array VIII 2 5 SAS SATA Communication Network IX Miscellaneous X Up to 4 blocks with 4 HDDs Slot 1 PCle 3 x8 max 168mm 2 CPU1 white colored Key included in basic unit 2X Option One CPU one memory per CPU and one PSU has to be selected for an orderable basic unit Fujitsu Technology Solutions x86 PRIMERGY Serve 4 of 28 PRIMERGY Software Configurators and Release Lists PRIMERGY RX300 S7 Status 2012 05 30 with OEM Software without OEM Software for PRIMERGY Server for PRIMERGY Server OEM SW is bound to HW and VMware Software is not allowed to be ordered VirtualCenter Management Server for any server released for Windows Server 2003 separately Virtual Infrastructure 3 for PRIMERGY gt except all mono PRIMERGY systems Exception VMware SW ESX2 for PRIMERGY RX TX300S2 RX TX600S3 BX620S2 BX630 Dual Quad BX630 8 way For all SW products please refer to the corresponding software configu
34. ration Four identical memory modules will be equipped in one memory bank to achieve highest memory performance All four modules are active and full capacity can be used Multiple of 4 identical modules to be configured per CPU S26361 F3694 E3 Mirrored Channel Mode Installation as soon as available BIOS Setup factory preinstalled to this mode Four identical memory modules are always equipped in one memory bank to use the Mirrored channel Mode Only two modules contain active data the remain two modules contain mirrored data Supported for RDIMM LRDIMM only Multiple of 4 identical modules to be configured per CPU Effective Memory capacity Rank Sparing Mode 1 Channel populated J LRDMM 2GB 1R GB 28 4GB iR 8GB 2R 16GB 2R 16GB 4A 32GB 4R 1 na na 2DPC SDPC na na eo Minimum one memory module or order code per CPU first memory Note 1 E Unbuffered Memory UDIMM no SDDC chipkill support Max DDR3 memory speed depends on the memory configuration one DDR3 unbuffered ECC mem Module 1 35V No of mem modules per channe as well as on the CPU type Choose up to 8 order codes per CPU The memory channel with the lowest speed defines the speed 2GB 1x2GB 1Rx8 L DDR3 1600 U ECC 526361 3694 513 of all CPU channels in the system also for the channels of the 4GB 1x4GB 2Rx8 L DDR3 1600 U ECC S 26361 F3694 E514 second CPU if configured Registered Memory RDIMM no SDDC chipkill support For real memory spee
35. rator accessible via the Extranet under Configuration amp Tools All configurations Software URL see below Linux Software Open Enterprise Server SuSE Linux ES OEM LO Red Hat EL OEM LO Microsoft Windows Server 2008 Server Licenses Windows Server 2008 Enterprise Windows Server 2008 Standard PRIMECLUSTER Windows Server 2008 Foundation Clustering Windows Web Server 2008 Load Balancing Microsoft Windows Server 2008 Client Access Licenses SCO Software Windows Server 2008 Device CAL SCO OpenServer Windows Server 2008 User CAL only 1 and 2 way Tower servers Windows Server 2008 Remote Desktop Services Device CAL SCO UnixWare only 1 2 and Windows Server 2008 Remote Desktop Services User CAL 4 way Tower and Rack servers x10sure x10sure Control Nodes and Compute Nodes Windows Server 2003 Compute Nodes for PRIMERGY BX600 RX TX MultiPath Duplex Data Manager DDM W2K W2K3 Linux W DDM for PRIMERGY except all mono PY systems Details eg version numbers are published on the page referred to Pay attention to the x10sure release and ordering information in the Extranet under https ts fujitsu com x10sure Manageability Software V IRMC advanced Pack RemoteView Software RemoteView Service Board RemoteView Diagnosis RemoteDeploy Pay attention to the PRIMECLUSTER release and ordering information in the Extra
36. stem InfiniBand Cu Cable 40Gb QSFP customized length max 1x per adapter 526361 3996 500 26361 F4475 E202 IB HCA 40Gb 2 port QDR IB HCA 2x 40Gb PCle 2 0 5 0GT s PCle x8 low profile ext 2x QSFP connector max 2x per system InfiniBand Cu Cable 40Gb QSFP customized length max 1x per adapter 526361 3996 500 26361 F4533 E102 E202 IB HCA 56Gb 1 and 2 port FDR IB HCA 2x 56Gb PCle 3 0 5 0GT s PCle x16 low profile ext 2x QSFP connector max 1X per system 526361 3996 556 InfiniBand Cable 56Gb customized QSFP 1m and 3m max 2x per adapter System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 O Loose Delivery S26361 F3592 L202 o o o O All controllers for the connection of external storage systems are delivered without cables For the configuration of external cabling see the configurator for external storage systems The SFP Module is also available as loose delivery 26361 F3592 L108 Instead SFP Modules SFP twinax cables from the switch vendors may be used loose delivery S26361 F4475 L102 Low Profile PCle form factor with exchangeable Full Height FH or Low Profile LP bracket If additional length of copper cable or optical cable are needed then they must be ordered from the cable vendor directly Copper cable are also available for loose deliv
37. system as available 26361 F3670 E100 S26361 F3670 E200 26361 F3670 E300 HD 1000GB 7 2krpm 3 5 HD 2000GB 7 2krpm 3 5 HD 3000GB 7 2krpm 3 5 7200rpm lt 9 0 ms 64MB Cache 7200rpm lt 9 0 ms 64MB Cache 7200rpm lt 9 0 ms 64MB Cache BC SATA 6Gb s BC SATA 6Gb s BC SATA 6Gb s hot plug hot replace tray hot plug hot replace tray hot plug hot replace tray max 6x per system max 6x per system max 6x per system Fujitsu Technology Solutions x86 PRIMERGY Serve 20 of 28 max 8x for V2xx 12x for V3xx 16x for V4xx 26361 F4555 E100 SSD SATA 100GB MLC Solid State Disk SATA 3Gb s Mainstream Perfomance hot plug hot replace tray max 8 12 16x per system 26361 F4541 E100 SSD 100GB SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F3708 E250 HD 250GB 7 2krpm 2 5 7200rpm lt 9 5ms 64MB Cache BC SATA 6Gb s hot plug hot replace tray max 8 12 16x per system S26361 F4482 E573 HD 73GB 15krpm 2 5 15000rpm 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system S26361 F4482 E190 HD 900GB 10krpm 2 5 10000rpm 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F4482 E130 HD 300GB 10krpm 2 5 10000rpm lt 4 5ms 8MB Cache SAS 6Gb s hot plug hot replace tray max 8 12 16x per system 26361 F4555 E200 SSD SATA 200GB MLC Solid State Disk SATA 3Gb s Mainstream Perfomance hot plug hot replace tray max 8
38. t setting for max speed In a 2 DIMMs per channel configuration following frequencies are supported 1 5V 1600MHz max depending CPU special memory modules 1 35V 1333MHz max depending on CPU In a 3 DIMMs per channel configuration memory will operate at 1 5V only SDDC Chipkill is supported for registered load redueced x4 organized memory modules only 1 In the Independent Channel Mode is following configuration possible Channels can be populated in any order in Independent Channel Mode All four channels may be populated in any order and have no matching requirements All channels must run at the same interface frequency but individual channels may run at different DIMM timings RAS latency CAS latency and so forth No mix of registered load reduced and unbuffered modules allowed 2 Rank Sparing Mode configuration Within a memory channel one rank is a spare of the other ranks The Spare Rank is held in reserve and is not available as system memory For the effective memory capacity please refer to the spreadsheet below The BIOS is set to the rank sparing setting Minimum configuration is 2 1R 2x 2R or 1x4R DDR3 module per channel This mode is not supported by unbuffered memory modules 3 Performance Mode configuration In this configuration the memory module population ex factory is spread across all channels The BIOS is set to the max performance for memory Minimum configuration is 4x identi
39. tem is required for a dual processor system Max two CPU s can be selected per basic unit Note Max DDR3 Bus Speed depends on One of following has to be selected as first CPU for an orderable basic unit Optional second CPU has to be the same type like the first CPU Basic 4C CPU s 1x 64 bit Intel Xeon 10MB Smart Cache 1066 MHz DDR3 Bus 6 40 GT s QPI Bus and passive heat sink occupies socket for one CPU Xeon E5 2603 4C 4T 1 80GHz 10MB 6 40GT s 1066MHz 80W 526361 3685 180 Xeon 5 2609 4C 4T 2 40GHz 10MB 6 40GT s 1066MHz 80W 26361 F3685 E240 Standard Turbo 6C CPU s 1x 64 bit Intel Xeon 15MB Smart Cache Hyper Threading HT 1333 MHz DDR3 Bus 7 20 GT s QPI Bus and passive heat sink occupies socket for one CPU Xeon E5 2620 6C 12T 2 00GHz 15MB 7 20GT s 1333MHz 95W 526361 3676 200 Xeon 5 2630 6C 12T 2 30GHz 15MB 7 20GT s 1333MHz 95W 526361 3676 230 Xeon E5 2640 6C 12T 2 50GHz 15MB 7 20GT s 1333MHz 95W 26361 F3676 E250 Advanced Turbo 8C CPU s 1x 64 bit Intel Xeon 20MB Smart Cache Hyper Threading HT 1600 MHz DDR3 Bus 8 00 GT s QPI Bus and passive heat sink occupies socket for one CPU Xeon E5 2670 8C 16T 2 60GHz 20MB 8 00GT s 1600MHz 115W 26361 F3686 E260 Xeon E5 2680 8C 16T 2 70GHz 20MB 8 00GT s 1600MHz 130W 526361 3686 270 Xeon 5 2690 8C 16T 2 90GHz 20 8 00GT s 1600MHz 135W 26361 F3686 E290 Frequency Optimized Turbo 2C 4C amp 6C CPU s 1x 64 bit Intel X
40. tor and order information guide PRIMERGY RX300 S7 Status 2012 05 30 S26361 F2735 L175 RMK F1 DI CMA QRL LV for loose delivery S26361 F2735 L10 Adapter angle PC DC Rack till 50Kg necessary for mounting RMKs in asymmetrical racks 26361 F2735 L7 Lateral cable management can only be mounted in asymmetrical PRIMECENTER S2 or new M1 racks in 1U above RMK Cable Management Arm CMA can only be used for FTS RMKs with CMA adapter 26361 F2735 L82 Cable management arm for 2U Server or higher for loose delivery can only be mounted at RMK with CMA adapter for loose delivery Rack mounting ex factory This service is to be ordered once per installable server storage subsystem in order to get the server storage subsystem mounted into the racks In case of the 46 U PCR S2 this service has to be ordered to get the mounting kits and the cables installed O PRIMERGY Classic 19 rack is not supported 9 of 28 There 2 processor sockets available The first socket must always be equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual processor system later on with a second CPU System configurator and order information guide PRIMERGY RX300 S7 Status 2012 05 30 Both PCle 3 x16 slots are connected to CPU 2 and are useable with configured 2nd CPU only Two processors with different clock frequencies are not possible A multi processor operating sys
41. with ECC RAID 0 1 amp 10 RAID 0 1 10 5 50 6 60 RAID 0 1 10 5 50 6 60 If the FBU option has been choosen the TFM Module is needed once per FBU as soon as available 26361 F3669 E1 RAID Ctrl SAS 6G 8port internal optional BBU optional FBU PCle x8 SATA and SAS hard drives SATA and SAS hard drives Low profile MD2 form factor PCle x8 PCle x8 Low profile MD2 form factor Low profile MD2 form factor 26361 F3257 E216 Cache Battery Backup Unit with 16 cm cable set max 1x per Controller 26361 F3669 L660 Lose delivery FBU option 26361 F3669 E100 RAID Key FastPath TFM Module for FBU option License Activation Key S26361 F3669 L100 for 1 Controller TFM Module for FBU option S26361 F3669 L661 RAID Key CacheCade License Activation Key S26361 F3669 L110 26361 F3669 E125 for 1 Controller Flash Backup Unit Flash Backup Unit with 25cm 55cm 70cm cable set with 25cm cable set Fujitsu Technology Solutions x86 PRIMERGY Serve 22 of 28 System configurator and order information guide PRIMERGY RX300 S7 SAS controller for external backup drives 26361 F3628 E201 ext 8 port max 3x per system O No mix and match of different FC or FCoE controllers possible Fibre Channel Controller for external storage systems 26361 F3631 E201 Qlogic 1 channel 8GBit sec FC Controller Qlogic QLE2562 low profile bracket 4x max 4x
Download Pdf Manuals
Related Search