Panasonic SC-HC05 docking speaker
Contents
1. E Bluetooth Supplied Accessories Check and identity the supplied accessories Use numbers indicated in parentheses when asking for replacement parts Product numbers correct as of January 2011 This may be subject to change To order accessories refer to Accessory Purchases United States and Puerto Rico on the next page 1 x AC power supply cord K2CB2CB00021 iz 1 x Remote control RAK SC989ZM 1 x Lithium Button Type battery Battery is already installed in the remote control Panasonic Consumer Electronics Company Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 http www panasonic com Panasonic Corporation 2011 Printed in China IMPORTANT SAFETY INSTRUCTIONS Model No SC HC05 Dear Customer Thank you for purchasing this system For optimum performance and safety read these instructions fully before you connect operate or adjust this system Keep this manual for future reference Your system and the illustrations can look differently If you have any questions contact 1 800 211 PANA 7262 The warranty can be found on the next page As an ENERGY STAR Partner Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR RQTX1316 2P L0111HH2031 Read these operating instructions carefully before using the unit Follow the2. TELEPHONE NUMBER to constitute a risk of electric shock to persons Product identification marking is located on the bottom of unit The unit should be installed near an accessible AC power outlet with the power cord connected directly to it To completely disconnect power from the unit unplug the power cord from the AC power outlet FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for
3. Install vTuner for Panasonic on your iPod touch or iPhone Connect your iPod touch or iPhone to the Internet Go to the Home screen of the iPod touch or iPhone 1 Connect the iPod touch or iPhone 2 Press SELECTOR to start the application e auto off function The system automatically switches off if there is no audio input and you do not use it for approximately 30 minutes 1 Press SELECTOR to select AUX mode Status indicator Off 2 Press and hold OK ON gt OFF default ON The light blue status indicator blinks 2 times OFF The light blue status indicator blinks 1 time Note e This function does not work when a Bluetooth device is connected e 1 minute before the system switches off the power indicator blinks The setting returns to the default when you disconnect the AC power supply cord You can connect and play an audio device wirelessly through Bluetooth Panasonic bears no responsibility for data and or information that can possibly be compromised during a wireless transmission Preparation Switch on the Bluetooth feature of the device and put the device near the system Read the operating instructions of the device for details The blue status indicator can indicate different Bluetooth conditions Blinks quickly The system is ready for pairing Blinks slowly The system is waiting to connect Lighted A Bluetooth device is connected Pai
4. os Cuando se conecta un iPod o iPhone pulse SELECTOR para conmutar entre modos radio Internet Bluetooth AUX o iPod El sistema se activa autom ticamente cuando conecta un iPod o iPhone que est en modo de reproducci n excepto en algunos modelos e Para comprar un adaptador para base de acoplamiento consulte a su distribuidor local de iPod o iPhone POWER 0 1 o VOLUME 0 0 O Inicie o pause la reproducci n Saltar o buscar pista Indicador de encendido Encendido El sistema est encendido Apagado El sistema est en modo de espera Base de acoplamiento de iPod o iPhone B Indicador de estado Verde El modo iPod Azul El modo Bluetooth Azul claro Configure o cancele la funci n de apagado autom tico La funci n de silencio est activada Apagado El modo AUX El indicador de estado verde parpadea cada vez que se pulsa un bot n del control remoto PUSH CLOSE Pulse mientras cierra la base de acoplamiento B Sensor del control remoto Apunte el control remoto al sensor del control remoto lejos de obst culos dentro de un rango m ximo de 7 m 23 pies directamente al frente de la unidad principal ar un iPod o iPhone Reproducci n b sica 1 Conectar el iPod o iPhone 2 Pulse gt 11 para iniciar la reproducci n Pause la Pulse 11 reproducci n Pulse nuevamente para contin e la reproducci n Salt
5. Sound from the device is broken The device is out of the 10 m 33 ft communication range Move the device nearer to the system Remove any obstacle between the system and the device e Switch off any wireless LAN device e Select MODE 1 for stable communication Memory reset Initialization When the following situations occur refer to the instructions below to reset the memory There is no response when buttons are pressed e You want to clear and reset the memory contents To reset the memor 1 Disconnect the AC power supply cord 2 While you press and hold POWER on the main unit connect the AC power supply cord again Wait until the power indicator lights up 3 Release POWER All the settings are set back to the factory preset The system is in standby mode Switch on the system to set the memory items again You can connect a portable audio equipment and listen to the audio through this system Preparation Switch off the equalizer if any of the portable audio equipment to prevent sound distortion Decrease the volume of the system and the portable audio equipment before you connect or disconnect the portable audio equipment AUX 1 Connect the portable audio equipment Plug type Y 3 5 mm stereo Audio cable not included 2 Press SELECTOR to select AUX mode Status indicator Off Portable audio equipment not included 3 Play the portable audio equipm
6. desconecte el cable de alimentaci n de CA
7. help FCC caution To maintain compliance with FCC regulations shielded interface cables must be used with this equipment Operation with non approved equipment or unshielded cables may result in interference to radio and TV reception Any changes or modifications not approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Support Contact Panasonic Consumer Electronics Company Telephone No 1 800 211 PANA 7262 A WARNING To satisfy FCC RF exposure requirements for mobile transmitting devices a separation of 20 cm or more should be maintained between the antenna of this device and persons during device operation To ensure compliance operations at closer than this distance are not recommended The antenna used for this transmitter must not be co located in conjunction with any other antenna or transmitter Made for iPod JiPhone Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to
8. la vez e El dispositivo permanece conectado incluso si el sistema se cambia a modo Pod o AUX Pareo con dispositivos adicionales 1 Pulse SELECTOR para seleccionar el modo Bluetooth 2 Pulse y mantenga pulsado PAIRING 3 Acceda al men Bluetooth del dispositivo y busque SC HC05 4 Paree o conecte el dispositivo a SC HC05 Puede parear hasta 6 dispositivos con este sistema Si se parea un 7mo dispositivo el dispositivo con el historial de conexi n m s antiguo ser reemplazado Debe realizar el pareo una sola vez salvo que e El pareo del dispositivo se hubiera reemplazado e La memoria del sistema se hubiera restablecido e El pareo de SC HCO5 se hubiera borrado del dispositivo Desconexi n del dispositivo Un dispositivo se desconecta cuando Apaga el sistema o el dispositivo e Mueve el dispositivo fuera del alcance m ximo e Detenga o desactiva la transmisi n Bluetooth del dispositivo Reproducci n b sica 1 Pulse SELECTOR para seleccionar el modo Bluetooth 2 Conectar el dispositivo 3 Pulse gt 11 para iniciar la reproducci n Pause la Pulse 11 reproducci n Pulse nuevamente para contin e la reproducci n Saltar pista Pulse a a o gt gt Nota e Cuando reproduzca material del iPod o iPhone mediante Bluetooth con la unidad principal podria haber sonidos intermitentes si deja activa la pantalla del menu de Bluetooth
9. or iPhone 2 Press gt 11 to start playback Press gt 11 Press again to continue playback Pause playback Skip track Search track Press maa or gt gt Press and hold ma a or gt gt View the iPod or Press iPod MENU iPhone menu Select an item Press A or W and then press OK Note Depending on the model it may be necessary to remove the iPod or iPhone and select the album artist etc on the iPod or iPhone e Operation results may vary depending on the iPod or iPhone models Read the User Guide of the iPod or iPhone for operating instructions Compatible iPod and iPhone as of January 2011 e iPod touch 4th generation 3GB 32GB 64GB iPod nano 6th generation 8GB 16GB e iPod touch 3rd generation 32GB 64GB e iPod nano 5th generation video camera 8GB 16GB e iPod touch 2nd generation 8GB 16GB 32GB iPod classic 120GB 160GB 2009 e iPod nano 4th generation video 8GB 16GB e iPod classic 160GB 2007 iPod touch 1st generation 8GB 16GB 32GB e iPod nano 3rd generation video 4GB 8GB e iPod classic 80GB iPod nano 2nd generation aluminum 2GB 4GB 8GB e iPod 5th generation video 60GB 80GB iPod 5th generation video 30GB e iPod nano 1st generation 1GB 2GB 4GB iPhone 4 16GB 32GB e iPhone 3GS 8GB 16GB 32GB e iPhone 3G 8GB 16GB e iPhone 4GB 8GB 16GB Compatibility depe
10. SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not e
11. ack Press 11 Press again to continue playback Skip track Press aa or gt gt ooting guide Note e When playing iPod or iPhone by Bluetooth with the main unit intermittent sound may be experienced if you leave the iPod or iPhone Bluetooth menu screen active or when making Bluetooth registration and connection If this occurs please exit the iPod or iPhone Bluetooth menu screen If playback does not start stop or disable the Bluetooth transmission of the device and then connect the device again If you connect an iPod or iPhone to the dock when it is playing via Bluetooth the system switches to iPod mode and playback is paused Press 11I to continue playback Link mode You can select different modes to suit the type of connection 1 Stop or disable the Bluetooth transmission of the device 2 Press Q LINK MODE MODE1 MODE2 default MODE 1 gt MODE 2 The light blue status indicator blinks 4 times MODE 2 gt MODE 1 The light blue status indicator blinks 2 times MODE 1 For stable communication MODE 2 For good audio quality Communication can disconnect easily Select MODE 1 if this occurs About Bluetooth Frequency band e This system uses the 2 4 GHz frequency band Certification This system conforms to frequency restrictions and has received certification based on frequency laws Thus a wireless permit is not necessary The act
12. al Power supply AC 120 V 60 Hz Power consumption 16W Dimensions W x H x D 370 mm x 176 mm x 85 mm 14 1 2 x7 x3 Y D 121 mm 4 dock open D 59 mm 2 without stand Mass Weight 1 8 kg 9 Ib Operating temperature range 0 to 40 C 32 F to 104 F Operating humidity range 35 to 80 RH no condensation Power consumption in standby mode 0 1 W approximate Note 1 Specifications are subject to change without notice Mass and dimensions are approximate 2 Total harmonic distortion is measured by the digital spectrum analyzer Remote control Before using Remove the insulation sheet before you use the remote control for the first time Replacing the battery Replace the remote control battery when it stops operating or when the range is decreased Replace with a new battery CR2025 only Insulation sheet e Battery holder Y Stopper 1 while pressing the stopper pull out the battery holder 2 Insert a new battery with the side facing up 3 Push the battery holder back fully CAUTION Insert with poles aligned e Do not touch the terminals and with metal objects e Do not recharge disassemble remodel heat or throw into fire e Keep out of reach of children Do not heat or expose to flame Do not leave the battery ies in an automobile exposed to direct sunlight for a long period of time with doors and windows closed e Remove the battery
13. ar pista Pulse a a o gt gt Buscar pista Pulse y mantenga pulsado lt lt o gt e Vea el men del Pulse iPod MENU iPod o iPhone Seleccione un Pulse A o W y despu s pulse elemento OK Nota e Dependiendo del modelo podr a requerirse quitar el iPod o el iPhone y elegir el lbum artista etc en el iPod o en el iPhone El funcionamiento podr a variar dependiendo de los modelos de iPod o iPhone e Lea el Manual del Usuario del iPod o iPhone para instrucciones de su funcionamiento C mo cargar un iPod o iPhone El iPod o iPhone se carga autom ticamente cuando est conectado al sistema incluso cuando el sistema est en modo de alimentaci n en espera e Consulte la pantalla del iPod o iPhone para verificar el estado de carga de su bater a Desconecte el iPod o iPhone si no se utiliza durante un periodo de tiempo largo despu s que se hubiera completado la carga e La carga se detiene cuando la bater a est completamente cargada La bater a se agotar de forma natural radio de Internet Puede escuchar una estaci n de radio en Internet si instala la aplicaci n vTuner for Panasonic en su iPod touch o iPhone Descargue esta aplicaci n de App Store Nota Para obtener modelos compatibles para iPod touch e iPhone e instrucciones sobre c mo utilizar la aplicaci n vTuner for Panasonic refi rase a http radio vtuner com panasonic en Preparaci n Instale vT
14. assemble heat above 60 C 140 F or incinerate WARNING Keep the Button Type battery out of reach of children to prevent swallowing If you see this symbol Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal lt For USA California only gt This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc and any use of such marks by Panasonic Corporation is under license Other trademarks and trade names are those of their respective owners 1 Damage requiring service The unit should be serviced by qualified service personnel if a The AC power supply cord or the plug has been damaged or b Objects or liquids have gotten into the unit or c The unit has been exposed to rain or d The unit does not operate normally or exhibits a marked change in performance or e The unit has been dropped or the cabinet damaged 2 Servicing Do not attempt to service the unit beyond that described in these operating instructions Refer all other servicing to authorized servicing personnel 3 Replac
15. del iPod o iPhone o cuando realice el registro y conexi n del dispositivo Bluetooth En caso de ocurrir esto por favor salga de la pantalla de men de Bluetooth del iPod o iPhone e Si no comienza la reproducci n detenga o desactiva la transmisi n Bluetooth del dispositivo y luego conecte el dispositivo nuevamente e Si conecta un iPod o un iPhone al acoplamiento del equipo cuando est reproduciendo v a Bluetooth el sistema cambia a modo Pod y la reproducci n se cambia a pausado Pulse gt 1I para continuar la reproducci n Modo de v nculo Puede elegir modos distintos para adecuarse al tipo de conexi n 1 Detenga o desactiva la transmisi n Bluetooth del dispositivo 2 Pulse Q LINK MODE MODO 1 lt MODO 2 predeterminado MODO 1 gt MODO 2 El indicador de estado azul claro parpadea 4 veces MODO 2 gt MODO 1 El indicador de estado azul claro parpadea 2 veces MODO 1 Para comunicaci n estable MODO 2 Para buena calidad de audio La comunicaci n se puede desconectar con facilidad Elija MODO 1 si esto ocurre El sistema se apaga autom ticamente si no hay entrada de audio y no lo utiliza durante aproximadamente 30 minutos 1 Pulse SELECTOR para seleccionar el modo AUX Indicador de estado Apagado 2 Pulse y mantenga pulsado OK ENCENDIDO lt APAGADO predeterminado ENCENDIDO El indicador de estado azul claro parpadea 2 veces El indicador de es
16. e Parts Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at http www pstc panasonic com Or send your request by E mail to npcparts us panasonic com You may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9am 9pm EST Panasonic Service and Technology Company 20421 84th Avenue South Kent WA 98032 We accept Visa MasterCard Discover Card American Express and Personal Checks For hearing or speech impaired TTY users TTY 1 866 605 1277 As of December 2010 ESPA OL iPod MENU Interruptor de alimentaci n en espera conectada d 1 POWER Pulse este interruptor para cambiar del modo de alimentaci n conectada al modo de alimentaci n en espera o viceversa En el modo de alimentaci n en espera la unidad consume una peque a cantidad de corriente Vea el men del iPod o iPhone Seleccione un elemento O Confirmar selecci n Configure o cancele la funci n de apagado autom tico O Seleccione el modo iPod radio de Internet Bluetooth o AUX Bluetooth es el modo predeterminado excepto cuando hay un iPod o iPhone conectado O Inicie el modo de pareo por Bluetooth Elija el modo de v nculo por Bluetooth Ajuste el nivel de entrada de audio en el modo AUX O Ajuste el volumen del sistema La configuraci n se restaurar a los valores predeterminados cuando desconecte el cable de alim
17. ement parts When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts Unauthorized substitutes may result in fire electric shock or other hazards 4 Safety check After repairs or service ask the servicer to perform safety checks to confirm that the unit is in proper working condition Product information For product information or assistance with product operation Refer to Customer Services Directory United States and Puerto Rico Amplifier section RMS output power stereo mode Front Ch both ch driven 20 W per channel 6 Q 1 kHz 10 THD Total RMS stereo mode power 40 W FTC output power stereo mode Front Ch both ch driven 15 W per channel 6 2 20 Hz to 20 kHz 10 THD Total FTC stereo mode power 30 W Terminal section AUX rear Terminal Stereo 3 5 mm jack Speaker section Type 2 way 2 speaker system passive radiator Speaker unit s Woofer 6 5 cm 2 cone type x 1 ch Tweeter 1 5 cm piezo type x 1 ch Passive radiators 8 cm 3 x 2 ch Impedance 60 Bluetooth section Bluetooth system specification Ver 2 1 EDR Wireless equipment classification Class 2 2 5 mW Support profiles A2DP AVRCP Frequency band 2402 MHz to 2480 MHz Adaptive Frequency Hopping Driving distance 10 m 33 ft line of sight iPhone 4 at height 1 m 3 3 ft in MODE 1 Gener
18. ent To adjust the audio input level Press Q LINK MODE PAIRING Note E NORMAL HIGH Read the operating instructions of the portable audio default equipment for details Components and cables are sold separately Note Select NORMAL if the sound is distorted during HIGH input level e The setting returns to the default when you disconnect the AC power supply cord Limited Warranty Panasonic Consumer Electronics Company Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 Panasonic Home Audio Products Limited Warranty Limited Warranty Coverage For USA and Puerto Rico Only If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Electronics Company referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Audio Products except items below 1 year 1 year DVD Home Theater System 1 year 1 year Home Theater Audio System 1 year 1 year USB Reader writer PC Card Adapters defective exchange 1 year Not Ap
19. entaci n de CA O Desactive el sonido del sistema En modo iPod Los indicadores de estado azul claro y verde parpadean alternativamente En modo Bluetooth Los indicadores de estado azul claro y azul parpadean alternativamente El indicador de estado azul claro parpadea continuamente Esta funci n no est activa cuando el sistema est en modo de pareo o esperando conectar con un dispositivo Bluetooth Pulse el bot n nuevamente para cancelar El silenciado del sonido tambi n se cancela cuando usted ajusta el volumen o cuando apaga el sistema En modo AUX C mo conectar un iPod o iPhone Preparaci n Actualice su iPod o iPhone con el software m s reciente Aseg rese de sacar el iPod o el iPhone de su estuche 1 Pulse 4 iPod para abrir la base de acoplamiento 2 Introduzca un adaptador para base de acoplamiento compatible 3 Conectar el iPod o iPhone El indicador de estado cambia a verde Adaptador para base de acoplamiento no suministrado iPhone no suministrado Conector Sujete la base de acoplamiento al conectar o desconectar el iPod o el iPhone Para cerrar la base de acoplamiento 1 Desconectar el iPod o iPhone 2 Pulse PUSH CLOSE mientras cierra la base de acoplamiento Nota e Aseg rese de alinear su iPod o iPhone con el conector cuando realice la inserci n e Aseg rese de pulsar PUSH CLOSE mientras cierra la base de acoplamiento para evitar da
20. iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance iPhone iPod iPod classic iPod nano and iPod touch are trademarks of Apple Inc registered in the U S and other countries CAUTION DO NOT INSTALL OR PLACE THIS UNIT INA BOOKCASE BUILT IN CABINET OR IN ANOTHER CONFINED SPACE ENSURE THE UNIT IS WELL VENTILATED TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PRODUCT DAMAGE e DO NOT EXPOSE THIS APPARATUS TO RAIN MOISTURE DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS e USE ONLY THE RECOMMENDED ACCESSORIES DO NOT REMOVE THE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions WARNING Risk of fire explosion and burns Do not dis
21. if you do not use the remote control for a long period of time Keep in a cool dark area If any electrolyte should come into contact with your hands or clothes wash it off thoroughly with water If any electrolyte should come into contact with your eyes never rub the eyes Rinse eyes thoroughly with water and then consult a doctor Connect the AC power supply cord Rear view view To household AC outlet e Use the included AC power supply cord with this system only Do not use an AC power supply cord from other equipment Conserving power The system consumes approximately 0 1 W when it is in standby mode Disconnect the power supply if you do not use the system Some settings will be lost after you disconnect the system You have to set them again Speakers Do not remove the speaker nets These speakers do not have magnetic shielding Do not put them near TVs PCs or other devices easily influenced by magnetism When you play at high levels for a long period it can cause damage to the system and decrease the life of the system e Decrease the volume when you play distorted sound to prevent damage iPod MENU OK SELECTOR LINK MODE O Standby on switch 6 amp POWER Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power View the iPod or iPhone menu O Select an item O Confirm a selection Se
22. ions below are punishable by law Taking apart or modifying the main unit Removing specification indications from the bottom of this main unit Restrictions of use e Wireless transmission and or usage with all Bluetooth equipped devices is not guaranteed All devices must conform to standards set by Bluetooth SIG Inc e Depending on the specifications and settings of a device it can fail to connect or some operations can be different e This system supports Bluetooth security features But depending on the operating environment and or settings this security is possibly not sufficient Transmit data wirelessly to this system with caution e This system cannot transmit data to a Bluetooth device Range of use e Use this device at a maximum range of 10 m 33 ft The range can decrease depending on the environment obstacles or interference Interference from other devices e Other devices can use the same frequency as this system and cause the system to operate incorrectly or sound distortion To prevent interference from other devices Keep the system away from other devices that emit radio frequency interference Do not use this system and a wireless LAN device at the same time Switch off any wireless LAN device Intended usage e This system is for normal general use only e Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference examp
23. le airports hospitals laboratories etc Before requesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated do not solve the problem refer to Customer Services Directory United States and Puerto Rico Common problems Power indicator blinks and then the system automatically switches off An error has occurred Disconnect the AC power supply cord Wait for a few seconds connect the AC power supply cord and then switch on the system again If the problem continues contact an authorized service center No sound Examine the connections e Increase the volume of the system e Examine the volume of the iPod iPhone Bluetooth device or portable audio equipment Make sure that the iPod iPhone Bluetooth device or portable audio equipment is actually playing something Sound is distorted e Lower the volume of the system e Noise can occur if you play a lower quality audio content e Make sure that the equalizer function of the iPod iPhone Bluetooth device or portable audio equipment is switched off e Move mobile telephones away from the main unit if the interference is apparent A humming sound can be heard during playback An AC power supply cord or fluorescent light is near the cable Keep other appliances and cords away from the cable of this system No response when remote control buttons are pressed Remove
24. nds on the software version of your iPod or iPhone Note The display on the iPod can show differently because of the compatibility of the iPod models All phone features can only be controlled by the touch screen of the iPhone e The system does not show incoming calls or the phone status Playback will stop when there is an incoming call Disconnect the iPhone to answer the call e Acall is not canceled when you connect or disconnect the iPhone from the system There is no Apple Inc specification that will guarantee the above iPhone response iPhone responses can be different on newer models or with newer software Charging an iPod or iPhone An iPod or iPhone is charged automatically when connected to the system even when the system is in standby mode See the iPod or iPhone display for its battery charging status Disconnect the iPod or iPhone if it is not used for an extended period of time after charging is complete e Charging stops when the battery is fully charged The battery will deplete naturally You can listen to a radio station on the Internet if you install the vTuner for Panasonic application on your iPod touch or iPhone Download this application from the App Store Note For compatible iPod touch and iPhone models and instructions on how to use the vTuner for Panasonic application refer to http radio vtuner com panasonic en to the Internet radio Preparation
25. plicable Accessories Headphones cartridges Microphones Adapters 90 days 90 days Rechargeable Batteries DVD RAM Disc defective exchange 10 days Not Applicable SD Memory Cards Rechargeable Battery Packs defective exchange 90 days Not Applicable During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States or Puerto Rico This warranty is extended only to the original purchaser of a new product which was not sold as is Carry In or Mail In Service To find a service center please visit http www panasonic com help or call 1 800 211 PANA 7262 When shipping the unit carefully pack include all accessories and send it prepaid adequately insured and preferably in the original carton When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A
26. ring and connecting a device 1 Press SELECTOR to select Bluetooth mode Status indicator Blue 2 Access the Bluetooth menu of the device and search for SC HC05 3 Pair or connect the device to SC HC05 If prompted for a passkey input 0000 The device connects with this system automatically after pairing is complete Note e A device must be paired to connect e This system can only connect to one device at a time A device stays connected even if the system is switched to iPod or AUX mode Pairing with additional devices 1 Press SELECTOR to select Bluetooth mode 2 Press and hold Q PAIRING 3 Access the Bluetooth menu of the device and search for SC HC05 4 Pair or connect the device to SC HC05 You can pair up to 6 devices with this system If a 7th device is paired the device with the oldest connection history will be replaced You only have to do pairing once unless e The pairing of the device has been replaced e The memory of this system has been reset e The pairing of SC HC05 has been deleted from the device Disconnecting a device A device is disconnected when you e Switch off the system or the device e Move the device out of the maximum range e Stop or disable the Bluetooth transmission of the device Basic playback 1 Press SELECTOR to select Bluetooth mode 2 Connect the device 3 Press 11 to start playback Pause playb
27. safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions o a Clean only with dry cloth N Do not use this apparatus near water heat Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this appara
28. t or cancel the auto off function Select iPod Internet radio Bluetooth or AUX mode Bluetooth is the default mode except when an iPod or iPhone is connected Start Bluetooth pairing mode Select Bluetooth link mode Adjust the audio input level in AUX mode O Adjust the volume of the system The setting returns to the default when you disconnect the AC power supply cord O Mute the sound of the system In iPod mode The light blue and green status indicators blink alternately In Bluetooth mode The light blue and blue status indicators blink alternately The light blue status indicator blinks continuously This function does not work when the system is pairing or waiting to connect with a Bluetooth device Press the button again to cancel Mute is also canceled when you adjust the volume or when you switch off the system In AUX mode Top view view POWER 0 1 o 7 VOLUME 0 0 O Start or pause playback Skip or search track Power indicator On The system is on Off The system is in standby mode B Pod or iPhone dock Status indicator Green iPod mode Blue Bluetooth mode Light blue Set or cancel the auto off function Mute function is on Off AUX mode The green status indicator blinks each time a remote control button is pressed PUSH CLOSE Press while closing the dock D Remote control sensor Point the remote control a
29. t the remote control sensor away from obstacles at a maximum range of 7 m 23 ft directly in front of the main unit To clean this system wipe with a soft dry cloth e Never use alcohol paint thinner or benzine to clean this system e Before using chemically treated cloth read the instructions that came with the cloth carefully Pod or iPhone Connecting an iPod or iPhone Preparation Update your iPod or iPhone with the latest software Make sure to remove the iPod or iPhone from its case 1 Push 4 iPod to open the dock 2 Inserta compatible dock adapter 3 Connect the iPod or iPhone The status indicator changes to green h Dock adapter not included iPhone not included Connector Hold the dock when connecting or disconnecting the iPod or iPhone To close the dock 1 Disconnect the iPod or iPhone 2 Press PUSH CLOSE while closing the dock Note Make sure to align your iPod or iPhone with the connector when inserting e Make sure to press PUSH CLOSE while closing the dock to prevent damage When an iPod or iPhone is connected press SELECTOR to switch between modes Internet radio Bluetooth AUX or iPod e The system automatically switches on when you connect an iPod or iPhone that is in playback mode except for some models To purchase a dock adapter consult your local iPod or iPhone dealer Basic playback 1 Connect the iPod
30. tado azul claro parpadea 1 vez APAGADO Nota e Esta funci n no trabaja cuando el dispositivo Bluetooth est conectado e 1 minuto antes que el sistema se apague el indicador de energ a parpadea e La configuraci n se restaurar a los valores predeterminados cuando desconecte el cable de alimentaci n de CA Puede conectar un equipo de audio port til y escuchar el audio a trav s de este sistema Preparaci n Apague el equializador si existe alguno del equipo de audio port til para evitar la distorsi n del sonido Baje el volumen del sistema y del equipo de audio port til antes de conectar o de desconectar del equipo de audio port til 1 Conecte el equipo de audio port til Tipo de clavija est reo de Y 3 5 mm 2 Pulse SELECTOR para seleccionar el modo AUX Indicador de estado Apagado 3 Reproduzca desde el equipo de audio port til Nota e Lea las instrucciones de operaci n del equipo de audio port til para obtener m s detalles e Los componentes y los cables se venden por separado Vista posterior Cable de audio no suministrado Equipo de audio port til no suministrado Para ajustar el nivel de entrada de audio Pulse LINK MODE PAIRING NORMAL predeterminado lt ALTO Nota e Seleccione NORMAL si el sonido est distorsionado durante un nivel de entrada ALTO e La configuraci n se restaurar a los valores predeterminados cuando
31. the insulation sheet before you use the remote control for the first time e Examine that the battery is installed correctly The battery is weak Replace it with a new one Other Panasonic equipment responds to the remote control of this system This system responds to the remote control of other Panasonic equipment Change the remote control code of the other Panasonic equipment iPod or iPhone iPod or iPhone does not switch on Make sure that the iPod or iPhone battery is not depleted Charge the iPod or iPhone Switch off the system and then switch it on again iPod or iPhone does not respond Make sure that the system is in iPod mode The iPod or iPhone is not connected correctly Remove the iPod or iPhone and connect it again iPod or iPhone does not charge e Examine the connections Bluetooth Pairing cannot be done e The device is out of the 10 m 33 ft communication range Move the device nearer to the system The device cannot be connected The pairing of the device was unsuccessful Read the instructions and try again The pairing of the device has been replaced Do pairing again Make sure that the system is not connected to a different device The device is connected but audio cannot be heard through the system e For some built in Bluetooth devices you have to set the audio output to SC HC05 manually Read the operating instructions of the device for details
32. tus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Panasonic Owner s Manual Compact Stereo System P Em Gp CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SERIAL NUMBER SC HC05 User memo The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance DATE OF PURCHASE DEALER NAME DEALER ADDRESS
33. uner for Panasonic en su iPod touch o iPhone Conecte su iPod touch o iPhone al Internet Vaya a la Pantalla de inicio en su iPod touch o iPhone 1 Conectar el iPod touch o iPhone 2 Pulse SELECTOR para iniciar la aplicaci n Puede conectar y reproducir un dispositivo de audio de manera inal mbrica a trav s de Bluetooth Panasonic no se responsabiliza por datos y o informaci n que podr an correr alg n riesgo durante la transmisi n inal mbrica Preparaci n Encienda la opci n de Bluetooth en el dispositivo y ponga el dispositivo cerca del sistema Lea las instrucciones de operaci n del dispositivo para obtener m s detalles El indicador de estado azul puede indicar distintas condiciones del Bluetooth Parpadea El sistema est listo para el pareo r pidamente Parpadea El sistema est esperando conexi n lentamente Encendido Un dispositivo Bluetooth est conectado Pareo y conexi n de un dispositivo 1 Pulse SELECTOR para seleccionar el modo Bluetooth Indicador de estado Azul 2 Acceda al men Bluetooth del dispositivo y busque SC HC05 3 Paree o conecte el dispositivo a SC HC05 Si le pide clave de acceso ingrese 0000 El dispositivo se conecta con el sistema autom ticamente despu s que se hubiera completado el pareo Nota e Para conectarse un dispositivo debe estar pareado e El sistema s lo puede conectarse a un dispositivo a
34. xclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product develops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Customer Services Directory United States and Puerto Rico Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com help or contact us via the web at http www panasonic com contactinfo You may also contact us directly at 1 800 211 PANA 7262 Monday Friday 9am 9pm Saturday Sunday 10am 7pm EST For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases United States and Puerto Rico Purchas
Download Pdf Manuals
Related Search