Zalman ZM-HDR1
Contents
1. Components gt Modular HDD Rack ZM HDR1 HDD Trays Manual User s Manual 4 Installation 1 ZM HRD1 Installation D Remove three 5 25 bay covers from the case J NNN ZALMAN COM 5 Insert the ZM HDRt1 into the 3 Bay slot 3 Secure the ZM HDR1 with the Bolts ZALMAN COM 2 Installing HDDs into ZM HDR1 HDD Tray Disassembly Press the Tray s button to the left and pull the lever to release then pull the Tray s chassis 2 8 HDD Tray Installation The blue LEDs will indicate properly LED installed trays 3 Cable Connections 5 POWER HDD POWER cables P aio ZALMAN COM gt To use the Hot Swap feature the S ATA Cable s and a 4 Pin power cable must be connected to the Hot Swap PCB For HDD stability please power the system OFF before removing2. ZALMAN ZM HBRI OOL INNOVATIONS MOCULAR S E3 315J HDD RACK 1 Precautions 1 Please read this manual thoroughly prior installation 2 Before installing check the components and condition of the product and if any problem is found contact the retailer 3 Avoid inserting objects or hands into the system while it is in operation to prevent product damage and injuries 4 Check the manual when connecting cables Incorrect connections may cause short circuits leading to fire hazards 5 Keep this unit away from heat sources direct sunlight water oil and humid environments and place the unit on a flat stable vibration free and well ventilated area 6 Donotclean the product surface with chemicals or wet cloth chemicals industrial brightener wax benzene alcohol paint thinner mosquito repellent aromatics lubricant detergent etc 7 Please wear gloves while handling this product to prevent injuries 8 Product design and specifications may be revised to improve quality and performance Disclaimer Zalman Tech Co Ltd is not responsible for any damages due to external causes including but not limited to improper use problems with electrical power accident neglect alteration repair improper installation or improper testing 12 Specifications Dimensions 149 L X 127 5 W X 244 5 D m Supports Hot Swap SATA SATA Low 5V 1100rpm High 12V 2400rpm Fan
3. the HDD Frequent installation and removal of an HDD can wear connectors To use the Hot Swap feature set motherboard BIOS to AHCI and format the HDD using AHCI Please refer to Zalman s website for further details ZALMAN COM EN
Download Pdf Manuals
Related Search