Cavalry CAND-T02
Contents
1. 24 e NFS Access ll Enter either an IP address or an IP subnet to grant access to a Click on Add to allow the IP address subnet access to the NFS To remove click on the IP address subnet on the left and click on Remove s Alternatively check Grant access to all to give all IP address subnet full access to the share O Click on Save NFS Access publi O Grant access to all Allowable IP Subnet IP Address zen 2 255 255 O Subnet 2 2 3 Printer Server zer the NAS as a printer server for remote printing Enable the printer server capability by checking the Enable box Connect the printer to the NAS via the USB port on the back of the unit USB port solely for network printers Turn on the printer Once the printer has been detected by a network computer install the necessary printer drivers drivers are installed on the computer not on the NAS unit Follow your operating system s instructions on adding a network printer NOTE If there are driver installation problems try directly connecting the printer to the network host computer first to install the driver Reconnect the printer to the NAS once the driver has been successfully installed NOTE GDI Host based printers are not compatible Certain multi function print ers with scanning functions might not work Contact the printer manufacture for detailed specifications 252. 26 2 3 System Ze CavaLry Linking People Globally Cavalry NAS firmware 2 6 7 n ZB Technology Co LTD 10 0 0 209 2 3 1 LAN Settings 2 3 2 Time Settings 2 3 3 Turn Off 2 3 4 Information 2 3 5 Disk Usage 2 3 6 Error Notification 2 LAN Settings Select Obtain IP Address automatically and Obtain DNS Server Address auto matically These default settings are recommended and appropriate for most cases If unsure contact the network administrator To alter the settings simply change the host name and input a static IP or specific DNS server addresses Contact the network adminstrator for specific network settings Click Save LAN Settings Hostname Cavalry Obtain IP Address automatically Use following IP Address IP Address 10 0 Subnet Mask 255 255 Default Gateway 10 J0 Obtain DNS Server Address automatically Use following DNS Server Address Primary 10 o Secondary Others 00 50 C2 2B D0 01 2 3 2 Time Settings aus the NAS internal clock to the local time manually or automatically Manually change the date time and time zone Click Save e Automatically change the time through a Network Time Protocol Server NTP Server a Select your time zone then choose one of the default NTP Server
3. Power LED light will indicate the unit is on Insert the Ethernet cable to the LAN port on the back of the NAS and the other end to an Ethernet port on the network adapter of a router switch hub The Link LED will indicate a connection Mapping Windows XP Users a laa Go to My Network Places then click on Entire Network in the left hand panel Go to Microsoft Windows Network gt gt Workgroup gt gt Cavalry Find and right click public then click on Map Network Drive In the new window designate a Drive Letter and click Finish When prompted enter Username admin Password admin After successfully mapping the drive the NAS will appear on My Computer and is ready for use Windows Vista Users 1 Ze de DOI Go to Network under the Start Menu Find and double click CAVALRY When prompted enter Username admin Password admin Find and right click public then click on Map Network Drive In the new window designate a Drive Letter and click Finish After successfully mapping the drive the NAS will appear on Computer and is ready for use Mac OS X 10 5 Users 1 2 3 4 5 In the Finder go to Go gt gt Connect to Server Command K Enter the NAS address e g cifs 192 168 1 5 This address can be found in Network Utility or by going to the router control settings on the web browser and searc
4. Scan to run a test the status of each disk Enter a Disk Spin Down Time to set the hard drives to spin down when the NAS has not been used for a certain period of time Disk Utility PASSED Deta dev sdb none dev sda none Disk spin down time Minute _Sav A CAUTION Reformatting a drive will erase all data 32 2 5 2 RAID Settings ey or change current RAID configurations RAID level and File system information is displayed x The RAID Size shows the total usable capacity of the NAS e g RAID 1 is mirrored so half of the total capacity is usable To change the RAID configuration click on Remove raid system then click OK to confirm A CAUTION Reconfiguring the drive will erase all data RAID Setting Raid level RAID 1 File system EXT3 Raid Size 1833 GB Raid Used 492 MB Remove raid system Disk Status Raid system is normal operation O dewisda O fdevwisdb Hitachi HDS72202 Hitachi HD572202 2000 GBytes 2000 GBytes Exchange Disk Restart the NAS and log back into the GUI and return to RAID Settings Select the desired RAID level and File system then click Create raid system Wait until the process is complete and do not power off the NAS The system will automatically restart Return to RAID Settings to view the completed array NOTE If one of the drives fail in RAID 1 contact C
5. for detailed activity information a Click on Clean to clear the logs 35 36 pa AAA Chapter 3 Personal Information 3 1 Personal Information Ya CavaLry Linking People Globally System Information Cavalry NAS firmware 2 6 7 n ZB Technology Co LTD 10 0 0 209 3 1 1 Account 3 1 1 Account Change password language preferences and account description View Disk Usage Share membership Click Save Account Information admin Change Password nu Please type your password again set From Browser Options Description Optional Quota unlimited Used 0 00MB Disk Usage j Percentage public Writable END LIST 37 38 Chapter 4 Help FAQ and Troubleshooting 4 1 Q Why can t access the NAS setup page A Please connect the NAS directly to your computer via the RJ45 port Open a web browser and key in the default IP address 192 168 1 1 Then type admin for both Ac count Name and Password to enter the NAS setup page 4 2 Q Why can t perform RAID functions under the FAT32 format A FAT32 format doesn t support RAID functions to perform RAID functions please use the ext2 or ext3 formats 4 3 Q lost my password what do I do A Press the reset button and hold it for 5 seconds to reset the device to its default set tings The default login is admin for both Account Name and Password Be aware
6. that resetting the device will erase all user and group accounts plus other settings 4 4 Q Why can t create share folders in SMB or the FTP Server with a non English lan guage A To avoid language support issues you are suggested to create share folders with English characters only 4 5 Q Why can t upload files via a LAN connection Why do get disconnected A1 Please make sure the networking is connected properly and that you have the ac cess rights read amp write for the folders A2 Please make sure you have enough bandwidth for uploading large files A com plicated network environment such as too many workgroups or too many layers of network can result in network disconnection 4 6 Q How do I reset the NAS A Press the reset button for 5 seconds and the NAS will reset to its factory default settings 40 4 7 Q Why can t Windows XP enter the SMB folder with a password via the NAS A Please update Windows XP to SP2 or higher 4 8 Q What is the NAS default login name and password A The default Login name admin default password admin 4 9 Q How do access the NAS via the Internet A If your NAS is using a public IP please perform the following steps 1 Enter the NAS web based GUI and go to the FTP Server page to enable FTP Status 2 Create User accounts and limits of authority 3 Open a web browser or FTP software and enter the NAS IP address in the address field ftp
7. CAND Series User s Guide Network Attached Storage cavalry Table of Contents 11 11 12 12 12 15 16 17 18 21 22 23 24 25 TABLE OF CONTENTS INTRODUCTION Features Accessories Conventions amp Safety Instructions QUICK START Mapping Web based GUI Printer IP Address FTP Service COMPLETE USER S GUIDE Chapter 1 Basics 1 1 Quick Setup 1 1 1 Wizard 1 1 2 Add User 1 1 3 Add Group 1 1 4 Add Share Chapter 2 Control Panel 2 1 Users and Groups 2 1 1 User Management 2 1 2 Group Management 2 2 File and Print 2 2 1 File Server 2 2 2 Share Management 2 2 3 Printer Server 2 3 System 2 3 1 LAN Settings 27 27 28 28 29 30 31 32 33 34 34 34 34 34 35 35 35 35 37 39 2 3 2 Time Settings 2 3 3 Turn Off 2 3 4 Information 2 3 5 Disk Usage 2 3 6 Error Notification 2 4 Network Service 2 4 1 DHCP Server 2 4 2 Bonjour 2 5 Maintenance 2 6 Log File 2 5 1 Disk Utility 2 5 2 RAID Settings 2 5 3 Firmware Upgrade 2 5 4 Save Configuration 2 5 5 Restore Configuration 2 5 6 Factory Reset 2 5 7 Software Update 2 6 1 Samba Log 2 6 2 FTP Log 2 6 3 DHCP Log 2 6 4 System Log 2 6 5 Administration Log Chapter 3 Personal Information 3 1 Personal Information 3 1 1 Account Chapter 4 Help FAQ and Troubleshooting Introduction Features 10 100 100 Mbit s LAN Speed Printer
8. NAS IP 4 10 Q Why can t the FTP link to the NAS or show link time out when using IE A Due to IE FTP incompatibility with the router we suggest users use FTP software to start with If you would like to use IE FTP to link the NAS please refer to following steps 1 Open Port 21 and 20 on the router and link to the NAS 2 Open IE gt gt Tool gt gt Inter net Options 3 Uncheck Enable folder view for FTP site and click OK 4 11 Q What is the maximum number of users for the FTP Samba server A 1 The FTP Server is able to create a maximum of 32 users accounts with 8 users connected simultaneously and a maximum of 16 folders shared by one account 2 The Samba Server has a Share Level Access with a maximum of 16 folders shared by root 4 12 Q What else can DHCP do with the NAS A You can setup the NAS as a DHCP server when there are no other DHCP Servers in your LAN otherwise the NAS will automatically turn off its DHCP server function and become a DHCP client of the existing DHCP Server For example if you have installed a router with a built in active DHCP Server the NAS will automatically setup itself as a DHCP client 4 13 Q Does the NAS support hard disk Power Management A The NAS enters standby mode for power management Sleep if there is no any activ ity ranging between 5 60 minutes You can go to the web based GUI gt gt Disk Utility gt gt Set Sleep Time function 0 to disable functio
9. al folder for this particular new user Check Enable Quota of and enter a the amount of space MB the user will be allowed to use Uncheck to remove quota restrictions To add this user as a member of a group click Group and follow section 1 1 3 To delete a user choose an existing user and click Delete User Click Save 21 User Management admin guestshare john kljk newuserl END LIST Existing Users User Name william Password een Please type your password again Description optional Create Shared private Folder Shared Private Folder Location mnt md1 O Enable Quota of MB 2 1 2 Group Management To add a new group To add a new user type a new name in the Group Name field Click Save To edit an existing group E Choose an existing group from the list gt To add members to this group click Members and follow section 1 1 3 To delete a group choose an existing group and click Delete Group O Click Save Group Management questshare END LIST Existing Groups Group Name Accounting 22 2 2 File and Print Y Zz Cavalry Linking People Globally System Information Product Name Cavalry NAS firmware are Version 2 6 7 n ZB Technology Co LTD 10 0 0 209 2 2 1 File Server 2 2 2 Share Management 2 2 3 Printer Server 2 2 1 File Server Change the character set of the NAS
10. avalry for instructions to rebuild the array F NOTE Linear mode means Spanning or BIG mode 33 34 2 5 3 Firmware Upgrade Update the NAS firmware e Check if the Current Firmware Version is the most recent by visiting the Cavalry website www cavalrystorage com gt gt Support gt gt Downloads Firmware Upgrade Current Firmware Version Upgrade File Choose File No file chosen Upgrade H If there is a newer version download it to your computer Click on Choose File to browse for and select the update bs Click Upgrade H Wait until the process is complete and do not power off the NAS ld The system will automatically restart 2 5 4 Save Configuration e Save the current configuration of the NAS onto the computer to create a backup 2 5 5 Restore Configuration a Restore a saved configuration from the backup created in 2 5 4 2 5 6 Factory Reset s Reset all settings to the original default configuration S All users groups and other configurations will be lost s Save the configuration 2 5 4 to create a backup of old settings 2 5 7 Software Update s Install optional software 2 6 Log File CavaLry Linking People Globally System Information Product Name Cavalry NAS firmware 2 6 7 n ZB Technology Co LTD 10 0 0 209 2 6 1 Samba Log 2 6 2 FTP Log 2 6 3 DHCP Log 2 6 4 System Log 2 6 5 Administration Log 2 6 1 2 6 5 Logs 2 View the respective logs
11. ble to edit the contents Writable gives the group full permission to make changes to the file ll Remove a group share from the Access Granted column by selecting the group share and clicking Remove E Click Confirm to finish adding the group Step 3 3 share Permission finance sranted newshare Read Only public Writable END LIST 1 1 4 Add Share Step 1 Choose a share name gt Enter a new share name The path will automatically be displayed u Enter an optional description gt Click Next to continue financial_statements mnt mdi financial_statements In Optional Step 2 Grant users and or groups access to the share e Click on a user or group groups are denoted by the prefix in the Access Denied column and click either Read Only or Writable to move the user to the Access Granted column To remove a user or group choose a user or group and click Remove Check the box next to Grant access to all to give all users and groups full access Click Next to continue See 2 2 2 to allow Windows network access Step 2 3 Windows FTP Access financial_statements O Grant access to all Access Granted Acces john Read Only lt lt Read Onl admin guest share Writable quest share END LIST Writable klik newuser ENDLIST The prefix denotes Group Name Ste
12. er the SMTP server address to set up an email service e Click Send Test Email to verify the email service works O Contact your email service provider for assistance Error Notification Setting Disk Usage Windows File Sharing Server FTP Server DHCP Server Check Interval Interval Email Notification Setting Enable Error Handling Mail Server Error Handling Email Addresses Pop Up Notification Setting Enable Error Handling Pop Up Machine Name 29 30 2 4 Network Service Y IL Cavalry Linking People Globally A kE Users System Information FileandPrint Cavalry NAS firmware 2 6 7 n ZB Technology Co LTD 10 0 0 209 2 4 1 DHCP Server 2 4 2 Bonjour 2 4 1 DHCP Server Check Enable Server to allow the NAS to act as a DHCP server Only on a LAN without an existing DHCP server Optional settings first red box mainly used is the NAS is not being used as a DHCP server Set these settings to conform to customized LAN settings Contact the Network Administrator for assistance If the NAS is being used as a DHCP server you can enter the range of IP addresses to be leased out in the fields DHCP IP Address Start End It will automatically calculate a subnet mask Click Save if complete To see the current list of DHCP addresses leased Click on DHCP Lease List To manually select a static IP addresses click on Static IP then enter the IP infor mation on
13. hing through the connected devices Also see 2 3 5 When prompted enter Username admin Password admin Mount i e map the public volume and it will automatically appear in Compu ter Shift Command C After successfully mounting the drive the NAS is ready for use To unmount eject the network drive Web based GUI 1 2 The NAS configuration GUI can be accessed by typing the following into any web browser http cavalry login cgi or http cavalry When prompted enter Username admin Password admin Once logged in the system IP address will appear See 2 3 5 for more information Refer to the rest of this guide to make advanced configuration changes 11 Printer optional 1 Attach a network capable printer to the NAS with the USB cable 2 Refer to your printer settings to properly configure it to the system F NOTE GDI Host based printers are not supported IP Address optional 1 To find the IP address of the NAS unit go to the command prompt cmd in Run 2 Type ping cavalry to return the IP address of the NAS cx C WINDOWS system32 cmd exe Microsoft Windows Version 5 2 3798 lt C Copyright 1985 2883 Microsoft Corp C Documents and Settings Administrator gt ping cavalry Pinging cavalry 18 8 8 28 1 with 32 bytes of data Reply from 10 0 0 209 bytes 32 time lt ims TTL 64 Reply from 10 0 0 209 bytes 32 time lt ims TTL 64 Reply from 18 8 8 289 bytes 32 time lt im
14. n enter between 5 60 minutes to enable this function 4 14 Q What is the protocol of network file sharing system using by the NAS A The NAS has the built in Samba Server for file sharing it is using a SMB Server Mes sage Block protocol to integrate TCP IP NETBUEI and IPX SPX protocol In other words if the client PC can support TCP IP NETBUEI or IPX SPX it will also be compatible with the NAS You can also use the built in FTP Server for file sharing with the internet client 4 15 Q Why isn t my USB Printer detected by the NAS Printer server module A The NAS Printer server does not support GDI Host based printers For some Multi Function Printers MFP scanning functions might not function properly Please contact the printer manufacture for detailed specifications 41 Copyright 2010 ae Su Le All ek a pan the names of s and the Cavalry ogo are registered trademarks of CAND Series 20100318 v1 3
15. owing steps Preference Language New Password Hostname IP Address DNS Server Settings leave both on automatic for default settings Time Confirmation 15 1 1 2 Add User step 1 Add user name and password Enter a new user name and password To simply create a new user with default settings enter the username and password in the first step then click Next then click Next through the remaining 2 steps Designate a shared folder by checking the Create Shared Private Folder box and specify the location of the folder if needed gt Specify the quota amount of megabytes MB this user will be allowed to use Leave unchecked to allow unrestricted usage s To edit user settings in the future go to section 2 1 1 O Click Next to continue Please type your password again Create Shared private Folder Shared Private Folder Location mnt md1 Enable Quota of 200 MB sieh 2 User Management Add or remove membership to existing groups Choose any existing group s to join and click Add The group will move to the Member column Remove a group from the Member column by selecting the group and clicking Remove Click Next to continue Step 2 3 User Manaaement Step 3 Share Permission Grant users access to existing group shares A group share is a location in the NAS where multiple users can
16. p 3 Network Files System NFS configuration Check the Grant Access to All box to remove all restrictions to the share All on the network will have unrestricted access to the share If you want to only grant certain IP addresses or subnets access to the share enter the IP subnet into the fields on the right and then click Add gt Click Confirm to finish adding the share Step 3 3 acts E Grant e access to all Allowable IP Subnet IP Address 10 0 0 123 12 0 0 1 255 255 255 0 10 J0 255 255 19 20 Ss Chapter 2 Control Panel 2 1 Users and Groups Y ZB CavaLry Linking People Globally me MI Penn ion System Information Product Name Cavalry NAS firmware Firmware Version 2 6 7 n Product Vendor ZB Technology Co LTD IP Address 10 0 0 209 2 1 1 User Management 2 1 2 Group Management 2 1 1 User Management gt add a new user To add a new user type a new name in the User Name field Enter a password and retype to confirm Check the Create Shared private Folder box to create a personal folder for this particular new user Check Enable Quota of and enter a the amount of space in MB the user will be allowed to use Click Save ie edit an existing user s account information Choose an existing user from the list Check the Create Shared private Folder box to create a person
17. rong impacts or dropping of the product may cause damage Only allow qualified personnel to repair this product Disassembling or opening this product will void your warranty Disclaimer Cavalry is not liable for compensation for data loss which may result from a malfunction of the product or from changes due to improper use repairs defects or battery change Please back up your data to avoid unexpected losses Cavalry reserves the right to make changes to the content of this manual without notice The most current manuals and software are available for download at Cavalry s website ATTENTION This guide will assist you in the operation of the product For your safety and to optimize your experience with this product please reading this entire manual before usage Quick Start Guide This portion of the manual gives a brief overview of the steps required to start transferring files It also goes over the main features and functions of the NAS drive such as attaching a printer and determining the unit s IP address Advanced configuration of formatting and RAID settings are not required to use the unit The drive is already preconfigured to RAID 1 and formatted to ext3 10 Quick Start NOTE For optimal security and convenience we recommend designating a single computer to handle all configurations 1 2 Connect the power adapter to the NAS Then plug the adapter into an electrical outlet Turn on the power the
18. s requires internet access or choose a user defined one g Click Update Time Time Settings Month Day 1 Hour 8 Minute 1 Ph GMT 01 00 Brussels Copenhagen Madrid Paris v Default time windows com User Define 2 3 3 Turn Off Turns off or Resets the unit Turning off the unit will allow the NAS to spin down the hard drives slowly and automatically power down Do not physically unplug the power cable when dur ing the shut down process Clicking Reset will perform a warm reboot Allow several minutes for this proc ess A relogin would be required CAUTION Make sure no users are accessing the drive when turning off or resetting Failure to do so may result in data loss 27 2 3 4 Information Displays the system information and the IP address of the NAS unit Use the IP address when mapping mounting the drive onto the computer See the Quick Start section System Information Product Name Cavalry NAS firmware Firmware Version 2 6 7 N Product Vendor ZB Technology Co LTD 2 3 5 Disk Usage Displays the amount of disk space used remaining gt View by summary or by individual users Disk Usage Last Checked 10 30 2009 18 38 17 Please select statistics information Summary M Disk Usage idevimd 1877034MB 492MB 1876541MB 28 2 3 6 Error Notification Send error malfunction notification email s Check the boxes of the warnings you wish to recieve a Ent
19. s TTL 64 Reply from 18 8 8 289 bytes 32 time lt ims TTL 64 Ping statistics for 10 0 0 209 Packets Sent 4 Received 4 Lost z loss Approximate round trip times in milli seconds Minimum ms Maximum ms Average Gms C Documents and Settings Administrator gt _ FTP Service optional 1 Use FTP to access the NAS from anywhere on the network by going to ftp cavalry or ftp address e g ftp 10 0 0 209 2 This will allow downloads and uploads of files on the NAS oO NOTE Using a dedicated FTP application is recommended 12 Complete User s Guide The remainder of this manual is optional and gives a more thorough guide to the features offered A higher level of networking experience may be required for some of the more advanced features The following three chapters corresponds to a menu item located on the top of the web based GUI Instructions to access the web based GUI can be found in the Quick Start section 14 ee Chapter 1 Basics 1 1 Quick Setup Click on Quick Setup on the left of the GUI to open a sub menu See the Quick Start section for instructions on how to access the GUI 1 1 1 1 1 2 1 13 1 1 4 Linking People Globally System Information Product Name Cavalry NAS firmware fersion 2 6 7 n ZB Technology Co LTD 10 0 0 222 Wizard Add User Add Group Add Share 1 1 1 Wizard Follow the on screen instructions to complete the foll
20. server capability with USB 2 0 Preconfigured to RAID 1 Preformatted to ext3 Supports RAID 0 RAID 1 Spanning and JBOD Supports ext 2 ext 3 FAT32 JBOD only formatting Supports FTP SMB server Supports UPnP Protocol Exceptional heat dissipation PC Mac and Linux compatible Accessories s Ethernet Cable RJ45 2 Power Adapter User Guide Conventions amp Safety Instructions CAUTION This symbol is to remind you to pay attention and read carefully Failure to do A so could result in injury or data loss Ya NOTE This symbol is used to provide you with useful information Read through this entire manual and save for future reference Place unit in a secure location to prevent being bumped or dropped Do not place near a radiator or other heat sources Do not use near water Gaps and opening on the outer enclosure are intended to provide airflow Never block or cover these openings or it may cause overheating The unit must be grounded It is equipped with a 3 wire grounded power cable Do not place where the cables could be stepped on gt Unplug the power cable from the unit before cleaning Keep the unit dry Do not use liquid cleaners aerosol cleaners or a wet cloth to clean e Disassembling the enclosure will void your warranty Copyright Please respect copyrighted content Duplication or modification of this publication in part or in whole is prohibited without expressed or written authorization Usage St
21. the static IP settings page then click Save Make sure that the chosen IP address fits in the LAN network based on the network ID and subnet mask DHCP Server Setting Enable Server DHCP Client Setting Subnet Mask optional Primary DNS optional secondary DNS optional Others DNS optional HCP IP Address Start HCP IP Address End Maximum Lease Time 2 4 2 Bonjour Enable Bonjour to connect network devices and applications and access shared music in iTunes Enable Disable the Bonjour function by checking the box Click on iTunes enable to allow iTunes to access shared music Access the NAS volume from your computer and create a folder called music under the public directory e g public music Store your music in this folder 10 0 0 2 10 0 0 50 1 day b Start iTunes and the NAS will appear as a shared drive 31 2 5 Maintenance Y Zz CavaLry Linking People Globally A PES System Information Product Nam Cavalry NAS firmware nware Ver 2 6 7 n ZB Technology Co LTD 10 0 0 209 2 5 1 Disk Utility 2 5 2 RAID Setting 2 5 3 Firmware Upgrade 2 5 4 Save Configuration 2 5 5 Restore Configuration 2 5 6 Factory Reset 2 5 7 Software Update 2 5 1 Disk Utility View the status of and reformat the individual hard drives Only use this utility for JBOD configurations To reformat choose from the drop down menu of formats must be non RAID Click
22. to one appropriate for your region Check the Windows Setting box checked by default to enable the NAS to be on a Windows workgroup network FTP capability is enabled by default Uncheck to remove feature Check Enable FTP with TLS to enable Transport Layer Security FTP capability is enabled by default Uncheck to remove feature Click Save File Server Setting English CP437 WORKGROUP Cavalry 2_6_ n 23 2 2 2 Share Management Grant users and or groups access to the share e Choose an existing share from the list and click on Windows FTP Access or NFS Access to configure preferred access method settings Share Management newshare share Name public Path mnt md1 public Description Optional Folder Share for public a Windows FTP Access FTP must be enabled See 2 2 1 Click on a user or group groups are denoted by the a in the Access Denied column and click either Read Only o Writable to move the user to the Access Granted un gt To remove a user or group from the share choose a user or group and click Remove Dl Alternatively check Grant access to all to give all users and groups full access to the share 2 Click Save Windows FTP Access public M Grant access to all guest share
23. view and or edit files Choose any existing group share s to grant users access to and click Read Only or Writable The group share will move to the Access Granted column with the chosen permissions Read Only will allow the user to access files in the group share but will not be able to edit the contents Writable gives the user full permission to make changes to the file Remove a group share from the Access Granted column by selecting the group share and clicking Remove Click Confirm to finish adding the user public Writable newshare Read Only END LIST 1 1 3 Add Group Step 1 Choose a group name e Enter a new group name Click Next to continue Step 1 3 Add Group Group Name finance Step 2 Add users to group E Click on a user in the Non member column and click Add to move the user to the Member column To remove a user from the group choose a user and click Remove Click Next to continue admin guest share kljk newuserl END LIST 17 18 P 3 Give a group access to existing group shares Choose any existing group share s to grant access to and click Read Only or Writable The group share will move to the Access Granted column with the chosen permissions Read Only will allow the group to access files in the group share but will not be a
Download Pdf Manuals
Related Search