Home
Samsung LN32C550J1F
Contents
1. Basic Features a E Changing the Preset Picture Mode MENU I gt Picture gt Mode gt ENTER Mode Select your preferred picture type by pressing the P MODE button E Dynamic Suitable for a bright room H Standard Suitable for a normal environment H Natural Suitable for an eye comfortable display amp Natural is not available in PC mode H Movie Suitable for watching movies in a dark room j Adjusting picture settings MENU I Picture gt Backlight gt ENTER 4 Backlight Contrast Brightness Sharpness Color Tint G R Your television has several setting options for picture quality control 3 NOTE e When you make changes to Backlight Contrast Brightness Sharpness Color or Tint G R the OSD will be adjusted accordingly In PC mode you can only make changes to Backlight Contrast and Brightness e Settings can be adjusted and stored for each external device connected to the TV e Lowering picture brightness reduces power consumption Ml Economical Solutions ECO Solution MENU I gt Picture gt ECO Solution gt ENTERC E Energy Saving Off Low Medium High Picture Off Auto This adjust the brightness of the TV in order to reduce power consumption If you select Picture Off the screen is turned off but the sound remains on Press any button to turn on the screen again 14 English E Eco Sensor Off On To enhance your power savings
2. Before your television can begin memorizing the available channels you must specify the type of signal source that is connected to the TV i e an Air or a Cable system Auto Program E Air Air antenna signal E Cable Cable antenna signal E Auto Air and Cable antenna NOTE e When selecting the Cable TV system Selects the cable system STD HRC and IRC identify various types of cable TV systems Contact your local cable company to identify the type of cable system that exists in your particular area At this point the signal source has been selected After all the available channels are stored it starts to remove scrambled channels The Auto program menu then reappears How to Stop Auto Programming 1 Press the ENTER 4 button 2 Amessage will ask Stop Auto Program Select Yes by pressing the lt or button 3 Press the ENTER C4 button E Editing channels MENU MM gt Channel gt Channel List ENTER C Channel Name Edit 1 Select a channel and press the TOOLS button 2 Edit the channel name using the Channel Name Edit menu E Channel Name Edit analog channels only Assign your own channel name a Other Features MENU E gt Channel gt ENTER Clear Scrambled Channel This function is used to filter out scrambled channels after Auto Program is completed This process may take up to 20 30 minutes How to Stop Searching Scrambled Channels 1 Press the ENTER button
3. English 45 Other Information Issues Solutions and Explanations Others The remote control does not work Replace the remote control batteries with correct polarity Clean the transmission window located on the top of the remote Try pointing the remote directly at the TV from 5 6 feet away The cable set top box remote control does not turn the TV on or off or adjust the volume A Mode Not Supported message appears Program the Cable Sat remote control to the operate the TV Refer to the Cable Sat user manual for SAMSUNG TV code Check the supported resolution of the TV and adjust the external device s output resolution accordingly Refer to resolution settings in this manual Caption on TV menu is greyed out Caption can not be selected in the TV menu when connected via HDMI or Component Caption must be activated on the external device There is a plastic smell from the TV This smell is normal and will dissipate over time TV Signal Information is unavailable in the Self Diagnosis Test menu This function is only available with digital channels from an Antenna RF Coax connection P 21 TV is tilted to the right or left side Remove the stand base from the TV and reassemble it The Channel menu is grey out unavailable The Channel menu is only available when the TV source is selected Your settings are lost after 30 minutes or every time the TV is
4. 4inches 4inches gt gt i 1 1 i 1 I 1 l I 1 1 I 1 1 1 l 1 1 1 I 1 1 1 l 1 1 i l 1 1 1 4inches i 1 1 1 2010 Samsung Electronics Co Ltd All rights reserved 2 English Contents Getting Started Advanced Features e store rata 4 e Network Connection ooococicnininnininccnincncrorconnnninnnos 23 ACCESSOMES wee eects cd Connecting to a Wired Network 23 e Installing the LCD TV Stand s 4 Connecting to a Wireless Network 25 e Viewing the Control Panel s s s 5 Media Plica 29 e Viewing the Remote Control 6 Connecting a USB Device 29 e Connecting to an Antenna monica 7 Connecting to the PC through network 29 Plug amp Play Initial SOU 7 Screen Display si Playing Multiple Files 34 7 Media Play Additional Functions 34 ANENE aissa ia 36 e Connecting to an AV DEVICE 8 Setting Up Anynet 37 e Connecting to an Audio Device oo eee 9 Switching between Anynet Devices 37 e Connecting to a PC Recording 37 e Changing the Input source Listening through a Receiver 38 Troubleshooting for Anynet 38 MR About AllShare 39 e How to Navigate MOUS seca 11 Setting Up AllShare 39 e Channel Menu ateos E Using Favorite Channels 2 Memorizing channels 12 e Assembling the Cables wcrc 41 Editing channels 13 e Anti theft Kensington LOCK 41 Other Features 13 e Installing the Wall Mount uo 41 Picture MONU iscsinccininamsnss aa a 14 e Securing th
5. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center Comun quese con SAMSUNG WORLDWIDE Si desea formular alguna pregunta o comentario en relaci n con los productos de Samsung comun quese con el centro de atenci n al cliente de SAMSUNG Country Customer Care Center amp Web Site Address CANADA 1 800 SAMSUNG 726 7864 www samsung com Samsung Electronics Canada Inc Customer Service 55 Standish Court Mississauga Ontario L5R 4B2 Canada Samsung Electronique Canada Inc Service a la Client le 55 Standish Court Mississauga Ontario L5R 4B2 Canada U S A 1 800 SAMSUNG 726 7864 www samsung com Samsung Electronics America Inc 85 Challenger Road Ridgefield Park NJ 07660 2112 BN68 02604A 05 imagine the possibilities Thank you for purchasing this Samsung product To receive more complete service please register your product at www samsung com register Model Serial No Sa 550 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice Important Warranty Information Regarding Television Format Viewing amp See the warranty card for more information on warranty terms Wide screen format LCD Displays 16 9 the aspec
6. HP 1920x1080 6 30 25 Geant MPEG4 SP ASP 1920x1080 6 30 8 VRO MPEG 1920x1080 24 25 30 30 VOB MPEG2 1920x1080 24 25 30 30 doin MPEG 1920x1080 24 25 30 30 a PS MPEG2 1920x1080 24 25 30 30 AC3 MPEG LPCM AAC H 264 1920x1080 6 30 25 ae MPEG2 1920x1080 24 25 30 30 ENE E TS H 264 1920x1080 6 30 25 ARC VC1 1920x1080 6 30 25 Other Restrictions NOTE If there are problems with the contents of a codec the codec will not be supported e If the information for a Container is incorrect and the file is in error the Container will not be able to play correctly Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above Video Decoder Audio Decoder e Supports up to H 264 Level 4 1 e H 264 FMO ASO RS VC1 SP MP AP L4 and AVCHD are not supported e H 263 is not supported e GMC 2 is not support e Supports up to WMA 7 8 9 STD e WMAQPRO does not support 2 channel excess multi channel or lossless audio e WMA sampling rate 22050Hz mono is not supported 3 2 English Playing movie continuously Resume Play If you exit the playing movie function the movie can be played later from the point where it was stopped 1 Select the movie file you want to play continuously by pressing the or button to select it from the file list section Press the gt Play ENTER C button Sele
7. category that deals with more sensitive material For example if you block the G category then PG 14 and 18 will automatically be blocked Canadian French You can block TV programs depending on their French Canadian rating G General 8 ans Programming generally considered acceptable for children 8 years and over to watch on their own 13 ans Programming may not be suitable for children under the age of 13 16 ans Programming is not suitable for children under the age of 16 18 ans Programming restricted to adults amp The V Chip will automatically block any category that deals with more sensitive material For example if you block the 8 ans category then 13 ans 16 ans and 18 ans will automatically be blocked also Downloadable U S Rating Parental restriction information can be used while watching DTV channels amp NOTE If information is not downloaded from the broadcasting station the Downloadable U S Rating menu is deactivated Parental restriction information is automatically downloaded while watching DTV channels It may take several seconds The Downloadable U S Rating menu is available for use after information is downloaded from the broadcasting station However depending on the information from the broadcasting station it may not be available for use Parental restriction levels differ depending on the broadcasting station The default menu name and Downloada
8. Empty the Recycle Bin function on the PC to permanently delete the file 30 English D Screen Display Move to the desired file using the up down right left buttons and then press the ENTER 4 or gt Play button The file is played amp Supports the View Devices and Contents Mode in Media Play homepage Information You can ascertain the selected file name and the number of files and page S93 N 894 psdueApy 0 Movie 02 avi Movie 03 avi DD Movie 04 avi a Jan 10 2010 Jan 10 2010 File List Section You can confirm the files and groups that are sorted by category Movie 05 avi j Movie 06 avi Jan 10 2010 Sort List Section Displays the sorting standard 3 The sorting standard is different depending on the contents Operation Buttons EY Red Change Device Selects a connected device E Green Preference Sets the file preference not supported in Basic view Yellow Select Selects multiple files from file list Selected files are marked with a symbol El Blue Sorting Selects the sort list a Tools Displays the option menu amp Using the aq or gt gt button file list can move to next or previous page Videos Playing Video 1 Press the lt or button to select Videos then press the ENTER EX button in the Media Play menu 2 Press the lt gt A button to select the desired video in the file list 3 Press the ENTER C button or
9. On Screen Keyboard eit fo IE Messange On On E Return i Exit Message Media ScreenShare Shows a list of mobile phones or connected devices which have been set up with this TV for using the Message Media or ScreenShare function amp The Media function is available in all mobile devices which support AllShare E Allowed Denied Allows Blocks the mobile phone E Delete Deletes the mobile phone from the list amp This function only deletes the name of the mobile from the list If the deleted mobile device is turned on or trieds to connect to the TV it may appear on the list again Using the Message Function Using this function you view call arrivals SMS messages and schedules set on the mobile phone through the alarm window while watching TV amp NOTE e To disable the alarm window set Message to Off in Setup of AllShare If OK is selected or if OK is not selected after the message has appeared three times the message will be deleted The message is not deleted from the mobile phone The alarm window can be displayed while using some applications such as Media Play etc To view the contents of a message switch to TV viewing mode When a message from an unknown mobile phone is displayed select the mobile phone on the message menu in AllShare and select Denied to block the phone Message View If anew SMS message arrives while you are watching TV the alarm window appears If
10. amp For information about power supply and more about power consumption refer to the label attached to the product i License DJ DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are DIGITAL PLUS trademarks of Dolby Laboratories PULSE DivX Certified to play DivX video up to HD 1080p including premium content ABOUT DIVX VIDEO DivX6 is a digital video format created by DivX Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play DivX Video on Demand VOD content To generate the registration code locate the DivX VOD section in the device setup menu Go to vod divx com with this code to complete the registration process and learn more about DivX VOD Pat 7 295 673 7 460 688 7 519 274 m Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 S dts 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are 2 0 Digital Out registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product includes software O DTS Inc All Rights Reserved Open source license notice n the case of using open source software Open Source Licenses are available on the product me
11. gt Play button The selected file is displayed on the top with its playing time If video time information is unknown play time and progress bar are not displayed During video playback you can search using lt and button amp In this mode you can enjoy movie clips contained on a Game but you cannot play the Game itself a 00 04 03 00 07 38 e Supported Subtitle Formats aoin Name File extension Format MPEG 4 time based text ttxt XML SAMI smi HTML SubRip srt string based SubViewer sub string based Micro DVD sub or txt string based Ek su CY Pause 4 Jump 2 Tools 9 Retum English 3 1 Advanced Features e Supported Video Formats File Extention Container Video Codec Resolution ie are Audio Codec Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 avi AVI XviD 1920x1080 6 30 8 MP3 AC3 LPCM mkv MKV H 264 BP MP HP 1920x1080 6 30 25 ADPCM DTS Core MPEG4 SP ASP 1920x1080 6 30 8 Divx 3 11 4 x 5 1 6 0 1920x1080 6 30 8 bag see XviD 1920x1080 6 30 8 MP3 AC3 LPCM H 264 BP MP HP 1920x1080 6 30 25 ADPCM WMA MPEG4 SP ASP 1920x1080 6 30 8 wmv ASF Window Media Video v9 1920x1080 6 30 25 WMA H 264 BP MP HP 1920x1080 6 30 25 mp4 MP4 MPEG4 SP ASP 1920x1080 6 30 8 MP3 ADPCM AAC XVID 1920x1080 6 30 8 dap ee H 264 BP MP
12. then all the categories in the young adult group will be blocked TV G TV PG TV 14 and TV MA The sub ratings D L S V work similarly So if you block the L sub rating in TV PG then the L sub ratings in TV 14 and TV MA will automatically be blocked MPAA Rating You can block movies depending on their MPAA rating The Motion Picture Association of America MPAA has implemented a rating system that provides parents or guardians with advanced information on which films are appropriate for children G General audience no restrictions PG Parental guidance suggested PG 13 Parents strongly cautioned R Restricted Children under 17 should be accompanied by an adult NC 17 No children under age 17 X Adults only NR Not rated The V Chip will automatically block any category that deals with more sensitive material For example if you block the PG 13 category then R NC 17 and X will automatically be blocked Canadian English You can block TV programs depending on their Anglophone Canadian C Programming intended for children under age 8 C8 Programming generally considered acceptable for children 8 years and over to watch on their own G General programming suitable for all audiences PG Parental Guidance 14 Programming contains themes or content which may not be suitable for viewers under the age of 14 18 Adult programming The V Chip will automatically block any
13. Antenna S When the TV is initially powered on basic settings proceed automatically o 3 Connecting the power cord and antenna g amp o VHF UHF Antenna D Ai D Q Plug amp Play Initial Setup When the TV is initially powered on a sequence of on screen prompts will assist in configuring basic settings Press the POWERO button Plug amp Play is available only when the Input source is set to TV To return to the previous step press the red button 1 2 NO O A OQ If You Want to Reset This Feature MENU I gt Setup gt Plug amp Play gt ENTER C Selecting a language Selecting Store Demo or Home Use Selecting an antenna Selecting a channel Setting the Clock Mode Viewing the HD Connection Guide Enjoy your TV Cable Press the A or Y button then press the ENTER C button Select the desired OSD On Screen Display language Press the or button then press the ENTER C button e Select the Home Use mode Store Demo Mode is for retail environments e To return the unit s settings from Store Demo to Home Use standard Press the volume button on the TV When you see the volume in the OSD press and hold MENU for 5 sec Press the A or Y button then press the ENTER C button Select Air Cable or Auto amp In Cable mode you can select the correct signal source among STD HRC and IRC by pressing the A Y lt or gt button then press the ENTER C button The c
14. HDMI mode is connected to the TV If such a problem occurs ask the manufacturer of the external device about the HDMI version ana if out of date request an upgrade e Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur f Ni A Using a Component up to 1080p Using an Audio Video Cable 480i only Available devices DVD Blu ray player cable box STB satellite receiver VCR y f Y o o oaran f A 3 When connecting to AV IN 1 the color of the AV IN 1 Y VIDEO jack Green does not match the color of the video cable Yellow For better picture quality the Component connection is recommended over the A V connection a U 0o d AUDIO OUT COMPONENT OUT STEV SENE O O O m Yelow Red White Red Blue Green R AUDIO L VIDEO OUT AUDIO OUT R AUDIO L a Je 8 English Connecting to an Audio Device Using an Optical Digital or Audio Analog Cable Connection Available devices Digital Audio System Amplifier Home Theater a N suondeuu0D zo DIGITAL AUDIO OUT OPTICAL T Red White 3 DIGITAL AUDIO OUT OPTICAL When a Digital Audio System is connected to the DIGITAL AUDIO OUT OPTICAL jack decrease t
15. If the wireless IP sharer supports DHCP your TV can use a DHCP or static IP address to connect to the wireless network Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure Ifyou apply a security system other than the systems listed below it will not work with the TV If Pure High throughput Greenfield 802 11n mode is selected and the Encryption type is set to WEP TKIP or TKIPAES WPS2Mixed for your AP Samsung TVs will not support a connection in compliance with new Wi Fi certification specifications Ifyour AP supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configure the SSID and WPA key in either mode Keep the Samsung Wireless LAN Adapter at a distance from the TV If you watch the TV with the Adapter connected nearby images may appear corrupted for some channels If your router modem or device is not certified it may not connect to the TV via the Samsung Wireless LAN Adapter Connection Methods You can setup the wireless network connection on four ways PBC WPS Auto Setup Using the Auto Network Search function Manual Setup Ad Hoc The Samsung Wireless LAN Adapter may not be recognized when using a connection via a
16. Polarity H V IBM 640 x 350 31 469 70 086 25 175 720 x 400 31 469 70 087 28 322 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 1152 x 870 68 681 75 062 100 000 720 x 576 35 910 59 950 32 750 1152 x 864 53 783 59 959 81 750 VESA CVT 1280 x 720 56 456 74 777 95 750 1280 x 960 75 231 74 857 130 000 640 x 480 31 469 59 940 25 175 640 x 480 37 861 72 809 31 500 640 x 480 37 500 75 000 31 500 800 x 600 37 879 60 317 40 000 800 x 600 48 077 72 188 50 000 800 x 600 46 875 75 000 49 500 024 x 768 48 363 60 004 65 000 024 x 768 56 476 70 069 75 000 024 x 768 60 023 75 029 78 750 152 x 864 67 500 75 000 08 000 VESADMT 1280 x 1024 63 981 60 020 08 000 1280 x 1024 79 976 75 025 35 000 280 x 800 49 702 59 810 83 500 280 x 800 62 795 74 934 06 500 280 x 960 60 000 60 000 08 000 280 x 720 45 000 60 000 74 250 360 x 768 47 712 60 015 85 500 440 x 900 55 935 59 887 06 500 440 x 900 70 635 74 984 36 750 1680 x 1050 65 290 59 954 46 250 280 x 720 52 500 70 000 89 040 VESAGIE 1280 x 1024 74 620 70 000 28 943 VESA DMT DTV CEA 1920 x 1080p 67 500 60 000 48 500 amp NOTE For HDMI DVI cable connection you must use the HDMI IN 1 DVI jack The interlace mode is not supported The set might operate abnormally if a non standard video format is selected Separate and Composite modes are supported
17. SOG Sync On Green is not supported EX LINK EX LINK Connector for service only Input Cables Sold Separately JM A gt a HDMI HDMI DVI Component Composite AV Coaxial RF VGA 1 0 English Changing the Input source Source List MENU M gt Input gt Source List gt ENTER SOURCE Use to select TV or an external input sources such as a DVD Blu ray player cable box STB satellite receiver E TV AV1 AV2 Componenti Component2 PC HDMI1 DVI HDMI2 HDMI3 HDMI4 USB _ You can only choose external devices that are connected to the TV In the Source List connected inputs will be highlighted amp PC always stay activated Basic Features How to Navigate Menus Before using the TV follow the steps below to learn how to navigate the menu and select and adjust different functions FTEC MENU button Displays the main on screen menu ENTER 4 Direction button Move the cursor and select an item Confirm the setting RETURN button Returns to the previous menu EXIT button Exits the on screen menu oo 00 Edit Name MENU M gt Input gt Edit Name gt ENTER 4 E VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA Name the device connected to the input jacks to make your input source selection easier 4 When a PC
18. TV is turned on by the Timer The TV will be automatically turned off after 3 hours of being left idle to prevent overheating Locking Programs MENU MI gt Setup gt Security gt ENTER A Security The PIN input screen appears Enter your 4 digit PIN number E V Chip The V Chip feature automatically locks out programs that are deemed inappropriate for children The user must enter a PIN personal identification number before any of the V Chip restrictions are set up or changed amp NOTE V Chip is not available in HDMI Component or PC mode The default PIN number of a new TV set is 0 0 0 0 e Allow all Press to unlock all TV ratings e Block all Press to lock all TV ratings V Chip Lock Off On You can block rated TV Programs TV Parental Guidelines You can block TV programs depending on their rating This function allows you to control what your children are watching TV Y Young children TV Y7 Children 7 and over TV G General audience TV PG Parental guidance TV 14 Viewers 14 and over TV MA Mature audience ALL Lock all TV ratings FV Fantasy violence V Violence S Sexual situation L Adult Language D Sexually Suggestive Dialog The V Chip will automatically block certain categories dealing with more sensitive material For example if you block the TV Y category then TV Y7 will automatically be blocked Similarly if you block the TV G category
19. USB hub or via a USB extension cable other than the cable supplied English 25 S3 N 894 psdueApy 0 Advanced Features Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter In such a case establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference Method 1 Connect using the USB right angle adapter To connect the Samsung Wireless LAN Adapter using the USB right angle adapter follow these steps 1 Connect the USB right angle adapter to the Samsung Wireless LAN Adapter 2 Connect the other end of the right angle adapter to the USB 1 HDD port Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable follow these steps 1 Connect the extension cable to the USB 1 HDD port 2 Connect the extension cable and Samsung Wireless LAN Adapter 3 Attach the Samsung Wireless LAN Adapter to the back of the TV near the top using double sided adhesive tape 26 English Network Setup PBC WPS How to set up using PBC WPS If your router has a PBC WPS button follow these steps 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the A or Y button t
20. View up to 1000 files can be displayed in each folder MP3 files with DRM that have been downloaded from a non free site cannot be played Digital Rights Management DRM is a technology that supports the creation distribution and management of the content in an integrated and comprehensive way including the protection of the rights and interests of the content providers the prevention of the illegal copying of contents as well as managing billings and settlements f more than 2 PTP devices are connected you can only use one at a time f more than two MSC devices are connected some of them may not be recognized A USB device that requires high power more than 500mA or 5V may not be supported f an over power warning message is displayed while you are connecting or using a USB device the device may not be recognized or may malfunction f the TV has been no input during time set in Auto Protection Time the Screensaver will run The power saving mode of some external hard disk drives may be released automatically when connected to the TV f a USB extension cable is used the USB device may not be recognized or the files on the device may not be read f a USB device connected to the TV is not recognized the list of files on the device is corrupted or a file in the list is not played connect the USB device to the PC format the device and check the connection f a file deleted from the PC is still found when Media Play is run use the
21. fire or electric shock 46 English Clean the product with a soft cloth dapped in a small amount of water Specifications Display Resolution 1920 x 1080 Environmental Considerations Operating Temperature 10 C to 40 C 50 F to 104 F Operating Humidity 10 to 80 non condensing Storage Temperature 20 C to 45 C 4 F to 113 F Storage Humidity 5 to 95 non condensing Stand Swivel Left Right 20 20 Model Name LN32C550 LN37C550 LN40C550 LN46C550 32 inches 37 inches 40 inches 46 inches Screen Size 31 5 inches measured 37 0 inches measured 40 0 inches measured 45 9 inches measured Diagonal diagonally diagonally diagonally diagonally Sound Output 10WX2 Dimensions WxDxH Body 31 2 X 3 1 X 19 5 inches 35 9 X 3 X 22 inches 38 6 X 3 2 X 23 5 inches 43 8 X 3 2 X 26 5 inches 793 7 X78 X 494 3 mm 911 6 X 78 2 X 559 4 mm 980 2 X 80 3 X 597 mm 1112 5 X 80 3 X 672 5 mm With stand 31 2 X 9 4 X 21 9 inches 35 9 X 10 X 24 5 inches 38 6 X 10 X 26 inches 43 8 X 10 8 X 29 inches 793 7 X 239 X 557 5 mm 911 6 X 255 X 622 8 mm 980 2 X 255 X 660 9 mm 1112 5 X 275 X 736 mm Weight Without Stand 20 7 Ibs 9 4 kg 26 5 Ibs 12 kg 32 6 lbs 14 8 kg 38 1 Ibs 17 3 kg With Stand 26 7 Ibs 12 1 kg 34 Ibs 15 4 kg 40 8 Ibs 18 5 kg 48 3 lbs 21 9 kg 3 Design and specifications are subject to change without prior notice amp This device is a Class B digital apparatus
22. on a solid wall perpendicular to the floor When attaching to other building materials please contact your nearest dealer If installed on a ceiling or slanted wall it may fall and result in severe personal injury amp NOTE Standard dimensions for wall mount kits are shown in the table below When purchasing our wall mount kit a detailed installation manual and all parts necessary for assembly are provided Do not use screws that do not comply with the VESA standard screw specifications Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the TV set For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications Do not fasten the screws too strongly this may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions Do not mount the TV at more than a 15 degree tilt Always use two people to mount the TV to a wall Product Family inches VESA Spec A B Standard Screw Quantity 75X75 ieee 100 X 100 M4 23 29 200 X 1
23. sort the files Jan 10 2010 2 files selected 1 1 Page Select Di Sorting 47 Tools Category Operation Videos Music Photos Ty Basic View Displays the whole folder You can view the photo by selecting the folder Y Y Y Title Sorts and displays the file title in Symbol Number Alphabet Special order Y Y Y EJ Preference Ll cd pea T a a You can change the file preference in the Y Y Y gt Latest Date Sorts and shows files by the latest date Y Y amp Earliest Date Sorts and shows files by the earliest date Y Y Artist Sorts the music file by artist in alphabetical order Y A Album Sorts the music file by album in alphabetical order Y Genre Sorts music files by the genre Y A Mood Sorts music files by the mood You can change the music mood information Y 73 Monthly Sorts and shows photo files by month Y 34 English Videos Music Photos Play Option menu Q During playing a file press the TOOLS button gt o Category Operation Videos Music Photos 5 Title You can move the other file directly of E Oo Repeat Mode You can play movie and music files repeatedly Y S Q pa Picture Size You can adjust the picture size to your preference 8 Mode1 Mode2 Y El Original 3 Picture Setting You can adjust the picture setting p 14 15 16 Y J Sound Setting You can adjust the sound setting p 16 17 Y Y A Subtitle Settin
24. turned off TV is in the Store Demo mode it will reset audio and picture settings every 30 minutes Please change from Store Demo mode to Home Use mode in the Plug amp Play procedure Press the SOURCE button to select TV mode go to MENU Setup Plug amp Play gt ENTER You have intermittent loss of audio or video Check the cable connections and reconnect them Loss of audio or video can be caused by using overly rigid or thick cables Make sure the cables are flexible enough for long term use mounting the TV to the wall we recommend using cables with 90 degree connectors The PIP menu is not available PIP functionality is only available when you are using a HDMI PC or components source You see small particles when you look closely at the edge of the frame of the TV This is part of the product s design and is not a defect POP TV s internal banner ad appears on the screen Select Home Use under Plug amp Play mode For details refer to Plug amp Play Initial Setup P 7 This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce However there may be a few bright or dark pixels on the screen These pixels will have no impact on the performance of the product Storage and Maintenance Do not spray water or a cleaning agent directly onto the product Any liquid that goes into the product may cause a failure
25. when done NOTE Only memorized channels can be reserved e Reserved programs will be displayed in the Programmed menu e When a digital channel is selected press the gt button to view the digital program E Select All Select all the channels in the channel list E Deselect All Deselect all the selected channels SA You can only select Deselect All when one or more channels are selected O Programmed in Channel List You can view modify or delete a show you have reserved to watch 1 Press the ENTER 4 button to select Channel List 2 Press the lt and Y button move to the Programmed menu E Change Info Change a show you have reserved to watch E Cancel Schedules Cancel a show you have reserved to watch E Information Display a show you have reserved to watch You can also change the reservation Information H Select All Deselect All You can select or deselect all channels in the channel list Fine Tune analog channels only If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted fine tune the channel manually e Select Fine Tune in the Channel menu 4 Fine tuned channels that have been saved are marked with an asterisk on the right hand side of the channel number in the channel banner To reset the fine tuning select Reset English 13 soinjee 9ISeg g0
26. with a resolution of 1920 x 1080 60Hz is connected to the HDMI IN 1 DVI port you should set to DVI PC mode under Edit Name Q When connecting an HDMI DVI cable to the HDMI IN 1 DVI port you should set to DVI PC or DVI Devices mode under Edit Name suondeuu0D Z0 How to Operate the OSD On Screen Display The access step may differ depending on the selected menu The main menu options appear on the screen Picture Sound Channel Setup Input Application Support 1 MENU M 2 A V Select an icon with the A or Y button 3 ENTER 4 Press ENTER 4 to access the sub menu 4 A V Select the desired submenu with the A or Y button 5 lt gt Adjust the value of an item with the lt or gt button The adjustment in the OSD may differ depending on the selected menu 6 ENTER 4 Press ENTER C to confi rm the selection 7 EXIT Press EXIT English 1 1 Basic Features Lo ChamnelMenu Seeing Channels Channel List MENU MI gt Channel gt Channel List ENTER C Add delete or set Favorite channels and use the program guide for digital broadcasts CHLIST Select a channel in the All Channels Added g Channels Favorite or Programmed screen i by pressing the A Y buttons and pressing the ENTER C button Then you can watch the selected channel Air sjauueyd peppy e 9 Air 9 1 y TVH9 10 Air y TV 10 y TV 7411 Antenna EH Zoom Mi Select lt Page 1 Tools a
27. you click the OK button the contents of the message are displayed _ You can configure the viewing settings for SMS messages on your mobile phones For the procedures refer to the mobile phone manual Q Some types of characters may be displayed as blank or broken characters English 39 sounjesj psdueApy 0 Advanced Features Call Arrival Alarm If a call arrives while you are watching TV the alarm window appears Schedule Alarm While you are watching TV the alarm window appears to display the registered event 3 You can configure viewing settings for schedule contents on your mobile phones For the procedures refer to the mobile phone manual Some special characters may be displayed as blank or broken characters Using the Media Function An alarm window appears informing the user that the media contents videos photos music sent from a mobile phone will be displayed on your TV The contents are played automatically 3 seconds after the alarm window appears Ifyou press the RETURN or EXIT button when the alarm window appears the media contents are not played amp NOTE If the media function executes for the first time the warning popup windows appears Press the ENTERLC button to select Allow then you can use Media function on that device Unknown Device 0 is requesting that the media file be allowed to play If you wish to allow the media file to be played at your device please pre
28. 00 30 40 200 X 200 M6 Perl 46 55 400 X 400 57 65 600 X 400 M8 70 80 800 X 400 80 1400 X 800 Do not install your Wall Mount Kit while your TV is turned on It may result in personal injury due to electric shock 4 2 English Securing the TV to the Wall Caution Pulling pushing or climbing on the TV may cause the TV to fall In particular ensure your children do NM not hang over or destabilize the TV Doing so may cause the TV to tip over causing serious injuries or death Follow all safety precautions provided in the Safety Flyer included with your TV For added stability and safety you can purchase and install the anti fall device as described below The TV Holder Kit Sold Separately The parts below are included in the TV Holder kit In addition you need to provide a wood screw screw and molly or other screw appropriate for the wall or cabinet you intend to secure the TV Holder string to We recommend a size M4xL20 wood screw M6 X L16 32 40 inch TVs M8 X L19 46 inch TV TV Holder BN96 15753A Screw Screw Installing the TV Holder 1 Remove the screw attached to the back of your TV and then connect the TV Holder to the TV with the screw included in the TV Holder Kit or that is designated for your TV ake sure to use only the appropriate supplied screw If you use a different screw you can damage your TV 2 Firmly fasten the screw you provided si
29. E Energy Saving Equalizer External Speaker F FAV CH button Favorite Channel H HD HDMI Home theater 39 36 14 12 41 16 10 41 20 13 16 10 37 9 36 18 9 10 15 14 16 17 6 12 12 16 9 35 Internet Protocol Setup L License M Media Play Melody Menu Language MP3 Play MTS N Network Connection Network Setup O ON OFF button Optimal resolution P Photo view Picture Reset PIN number PIP Position Power Indicator R Remote Control RGB 24 47 29 21 20 33 6 17 23 24 33 16 18 21 21 S Screen Fit Sleep Timer Slide Show Software Upgrade Source List Speaker Select Standby mode Supported Subtitle Formats Supported Video Formats T Timer V Video play Virtual Surround Volume W Wall Mount White Balance Wide Fit Wireless English 49 15 18 33 22 11 17 31 32 31 16 5 6 18 41 15 15 25 UO eunoJu JOUIO GO This page is intention ally left blank
30. Fri Sat Nga Sun Mon 4 Move Adjust EY Enter 5 Return On Time Off Time Set the hour minute am pm and activate inactivate To activate the timer with the setting you have chosen set to Activate Volume Set the desired volume level Source Select TV or USB content to be played when the TV is turned on automatically USB can be selected only when a USB device is connected to the TV Antenna when the Source is set to TV Select Air or Cable 1 8 English Channel when the Source is set to TV Select the desired channel Contents when the Source is set to USB Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically If there is no music file on the USB device or the folder containing a music file is not selected the Timer function does not operate correctly amp Q When there is only one photo file in the USB the Slide Show will not play amp A folder with too long of aname cannot be selected amp Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names Repeat Select Once Everyday Mon Fri Mon Sat Sat Sun or Manual to set at you convenience If you select Manual you can set up the day you want to activate the timer The v mark indicates the day is selected amp Auto Power Off available only when the
31. Game Mode is not available when the input source is set to TV or PC After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode is On Picture mode is set to Standard and Sound mode is set to Movie Equalizer is not available H Menu Transparency Bright Dark Set the Support Menu Transparency of the menu E Melody Off Low Medium High Set so that a MENU MI gt Support ENTERL soinjee 9ISeg 0 melody plays when the TV is turned on or off amp NOTE Self Diagnosis O nly available when the Input source is set to TV MH Picture Test Use to check for picture problems If the tum the melody off set Melody to Off problem continues to occur check the Color pattern The Melody does not play g Yes If the test pattern does not appear or there is When no sound is output from the TV because the noise in the test pattern select Yes There may be a MUTE button has been pressed problem with the TV Contact Samsung s Call Center for When no sound is output from the TV because the assistance 1 800 SAMSUNG volume has been reduced to minimum with the No If the test pattern is properly displayed select No VOL button There may be a problem with your external equipment When the TV is turned off by Sleep Timer function Please check your connections If the problem persists refer to the external device s user manual a
32. OOLS button to display the Anynet menu and select a menu you want want to exit Anynet e Select View TV in the Anynet menu e Press the SOURCE button on the TV remote control and select a device other than Anynet devices e Press Y CH A CH LIST PRE CH and FAV CH to change the TV mode Note that the channel button operates only when a tuner embedded Anynet device is not connected The message Connecting to e You cannot use the remote control when you are configuring Anynet or switching to a view mode Anynet device appears on e Use the remote control when the Anynet setting or switching to view mode is complete the screen The Anynet device does not e You cannot use the play function when Plug amp Play initial setup is in progress play The connected device is not e Check whether or not the device supports Anynet functions displayed e Check whether or not the HDMI cable is properly connected e Check whether Anynet HDMI CEC is set to On in the Anynet setup menu e Search Anynet devices again e You can connect an Anynet device using the HDMI cable only Some HDMI cables may not support Anynet functions e Ifit is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure please repeat the device scan The TV Program cannot be e Check whether the antenna jack on the recording device is properly connected recorded The TV sound is not ou
33. On Screen Text Messages E Caption Off On You can switch the caption function on or off If captions are CC not available they will not be displayed on the screen E 3 The Caption feature does not work in Component HDMI or PC modes H Caption Mode You can select the desired caption mode amp The availability of captions depends on the program being broadcasted Default CC1 CC4 Text1 Text4 analog channels only The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV Depending on the broadcasting signal the Analog Caption function may or may not work with digital channels Default Service1 Service6 CC1 CC4 Text1 Text4 digital channels only The Digital Captions function works with digital channels amp Service1 6 may not be available in digital caption mode depending on the broadcast H_ Digital Caption Options digital channels only Size Options include Default Small Standard and Large The default is Standard Font Style Options include Default and Styles 0 to 7 The default is Style O Foreground Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the color of the letter The default is White 20 English Background Color Options include Default White Black Red Green Blue Yellow Magenta and Cyan You can change the background color of
34. Picture In Picture PIP E Sound Test Use the built in melody sound to check for sound problems amp If you hear no sound from the TV s speakers PIP before performing the sound test make sure Speaker Select is set to TV speaker in the MENU I gt Setup gt PIP gt ENTER Saund mani You can watch the TV tuner and one external video source amp The melody will be heard during the test even if simultaneously PIP Picture in Picture does not function in Speaker Select is set to External Speaker or the the same mode sound is muted by pressing the MUTE button NOTE Yes If you can hear sound only from one speaker or not at all during the sound test select Yes There may be a p For PIE EAS MA Sound Selget problem with the TV Contact Samsung s Call Center for Dees o assistance 1 800 SAMSUNG Ifyou turn the TV off while watching in PIP mode the No If you can hear sound from the speakers select No PIP window will disappear There may be a problem with your external equipment e You may notice that the picture in the PIP window Please check your connections If the problem persists becomes slightly unnatural when you use the main refer to the external device s user manual screen to view a game or karaoke E Signal Information digital channels only An HD e While V Chip operation the PIP function cannot be channel s reception quality is either perfect or the used channels are unavailable Adjust your antenn
35. R C button on the remote control MENU Displays an on screen menu the OSD on screen display of your TV s features VOL Adjusts the volume In the OSD use the VOL buttons as you would use the and buttons on the remote control V CHA Changes the channels In the OSD use the ww CH A buttons as you would use the Y and A buttons on the remote control Power Indicator Blinks and turns off when the power is on and lights up in standby mode Standby mode Do not leave your TV in standby mode for long periods of time when you are away on a holiday for example A small amount of electric power is still consumed even when the power button is turned off It is best to unplug the power cord English 5 Getting Started Viewing the Remote Control This is a special remote control for the visually impaired persons and has Braille points on the Power Channel Volume buttons Turns the TV on and off TE cs Displays and selects the available video sources P co E Press to directly access to channels Press to select additional channels digital being broadcast by the same station For example to select channel 54 3 press 64 then press and 3 Adjusts the volume Displays the channel list on the screen P 12 Views Media Play P 29 MEDIA o E J FACH UN _ Quickly select frequently used functions Selects the on screen menu items and changes the values seen
36. a to PIP Settings increase signal strength E Troubleshooting If the TV seems to have a problem refer to this description TV amp If none of these troubleshooting tips apply contact the Samsung customer service center Main picture Sub picture Componenti Component2 HDMI1 DVI HDMI2 HDMI3 HDMI4 PC E PIP Off On Activate or deactivate the PIP function E Air Cable Air Cable Select either Air or Cable as the input source for the sub screen EH Channel Select the channel for the sub screen E Size ml L_ Select a size for the sub picture E Position L4 C5 E E Select a position for the sub picture H Sound Select Main Sub You can choose the desired sound Main or Sub in PIP mode English 21 Basic Features Software Upgrade Software Upgrade can be performed by network connection or downloading the latest firmware from www samsung com to a USB memory device Current Version the software already installed in the TV amp Software is represented as Year Month Day_Version Software Upgrade Current Version 2010 01 18 000001 By USB gt By Online Alternative Software Move 4 Enter 5 Return Installing the Latest Version fio amo Mm E By USB Insert a USB drive TV Side Panel containing the firmware upgrade file downloaded from www samsung com into the TV Please be ca
37. able 1 For more information on how to configure your network refer to Network Connection You are recommended to locate both TV and PC in same subnet The first 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part the host address should be changed e g IP Address 123 456 789 2 Using a LAN cable connect between the external modem and the PC onto which the Samsung PC Share Manager program will be installed You can connect the TV to the PC directly without connecting it through a Sharer Router English 29 Advanced Features 83 Functions that are not supported when connecting to a PC through a network The Background Music and Background Music Setting functions Sorting files by preference in the Photos Music and Videos folders he lt lt REW or gt gt FF button while a movie is playing amp The Divx DRM Multi audio embedded caption does not supported amp Samsung PC Share manager should be permitted by the firewall program on your PC 3 When you use Media Play mode through a network connection According to functions of the provided server The sorting method may vary The scene search function may not be supported The Play Continuously function which resumes playing of a video may not be supported The Play Continuously function does not support multiple users It will have only memorized t
38. able in TV AV COMPONENT 480i 1080 and HDMI 480i 1080i E Auto Protection Time 2 hours 4 hours 8 hours 10 hours Off If the screen remains idle with a still image for a certain period of time defined by the user the screen saver is activated to prevent the formation of ghost images on the screen 1 6 English Picture Reset OK Cancel Resets your current picture mode to its default settings a Changing the Preset Sound Mode MENU I gt Sound gt Mode gt ENTERC Mode MH Standard Selects the normal sound mode E Music Emphasizes music over voices E Movie Provides the best sound for movies E Clear Voice Emphasizes voices over other sounds H Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired J Adjusting sound settings MENU I gt Sound gt Equalizer ENTERC Equalizer Adjusts the sound mode H Balance L R Adjusts the balance between the right and left speaker HM 100Hz 300Hz 1KHz 3KHz 10KHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies Ml Reset Resets the equalizer to its default settings dl Sound Settings MENU MI gt Sound gt ENTER CS Virtual Surround Off On standard sound mode only This function provides a virtual 5 1 channel surround sound experience through a pair of speakers or headphones using HRTF Head Related Transf
39. ables connected to the TV and external devices e Set your external device s Cable Sat Box DVD Blu ray etc video outputs to match the connections to the TV input For example if an external device s output is HDMI it should be connected to an HDMI input on the TV e Make sure your connected devices are powered on e Be sure to select the TV s correct source by pressing the SOURCE button on the remote control e Reboot the connected device by reconnecting the device s power cable RF Cable Antenna Connection The TV is not receiving all channels e Make sure the coaxial cable is connected securely e Please try Auto Program to add available channels to the channel list go to MENU Channel Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu There are 3 options STD HRC and IRC P 12 e Verify the Antenna is positioned correctly No Caption on digital channels e Check Caption Setup menu Try changing Caption Mode Service 1 to CC1 P 20 e Some channels may not have caption data The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies e A low signal can cause picture distortion This is not a TV problem PC Connection A Mode Not Supported message appears e Set your PC s output resolu
40. amp All Channels Shows all currently available channels E Added Channels Shows all added channels m Y Favorite Shows all favorite channels A Programmed Shows all currently reserved programs SY Using the color buttons with the Channel List Red Antenna Switches to Air or Cable E Green Zoom Enlarges or shrinks a channel number Cc Yellow Select Selects multiple channel lists Select desired channels and press the Yellow button to set all the selected channels at the same time The v mark appears to the left of the selected channels G Page Move to next or previous page al Tools Displays the Channel List option menu The Options menus may differ depending on the situation Channel Status Display Icons Icons Operations Y A channel selected Y A channel set as a Favorite A reserved program a A program currently being broadcast 1 2 English a Using Favorite Channels MENU I gt Channel gt Channel List ENTER Y Add to Favorite Delete from Favorite Set channels you watch frequently as Favorites FAV CH 1 Select a channel and press the TOOLS A button 2 Add or delete a channel using the Add to Favorite or Delete from Favorite menu respectively Delete Timer Viewing Channel Name Edit Select All gt a o D a 2 D D a Memorizing channels MENU I gt Channel gt ENTER Antenna Air Cable
41. ble U S Rating change depending on the downloaded information Even if you set the on screen display to another language the Downloadable U S Rating menu will appear in English only The rating will automatically block certain categories that deal with more sensitive material The rating titles For example Humor Level etc and TV ratings For example DH MH H etc may differ depending on the broadcasting station Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter them As soon as the 4 digits are entered the Confirm New PIN screen appears Re enter the same 4 digits When the Confirm screen disappears your PIN has been memorized English 19 soinjee 9ISeg 0 Basic Features How to watch a restricted channel If the TV is tuned to a restricted channel the V Chip will block it The screen will go blank and the following message will appear This channel is blocked by V Chip Please enter the PIN to unblock amp it you forget the PIN press the remote control buttons in the following sequence which resets the pin to 0 0 0 0 POWER off gt MUTE gt 8 gt 2 4 POWER on a Other Features MENU I gt Setup gt ENTER Menu Language Set the menu language 1 Select Menu Language and press the ENTER 4 button 2 Choose desired language and press the ENTER 4 button 3 Choose between English Espa ol and Francais Caption
42. ct Play Continuously Resume Play by pressing the Blue button The Movie will begin to play from where it was stopped amp The Blue button is available when resuming play S Ifthe Continuous Movie Play Help function is set to On in the Settings menu a pop up message will appear when you resume play a movie file Music Playing Music 1 Press the lt or button to select Music then press the ENTER C button in the Media Play menu 2 Press the 4 A W button to select the desired Music in the file list 3 Press the ENTER 4 button or gt Play button During music playback you can search using lt and button 44 REW and gt gt FF buttons do not function during play amp Only displays the files with MP3 and PCM file extension Other file extensions are not displayed even if they are saved on the same USB device amp If the sound is abnormal when playing MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem Photos Viewing a Photo or Slide Show 1 Press the or gt button to select Photos then press the ENTER C button in the Media Play menu 2 Press the 4 A W button to select the desired photo in the file list 3 Press the ENTER C button or gt Play button While a photo list is displayed press the gt Play ENTER button on the remote control to sta
43. e TV to the Wall aa 43 Changing the Preset Picture Mode 14 Troubleshootind asma 44 Adjusting picture settings 14 Storage and Maintenance 46 g Economical Solutions 14 Specifications o n 47 Y Setting up the TV with your PC 14 License 47 wn Changing the Picture Options 15 DIMENSIONS coeccccccecececececcccececececscececeeseetecececevecetstsece 48 SOUND MENU iscccocconoaco cidad saeteerdecadvacssetaveennns 16 e e ad 49 Changing the Preset Sound Mode 16 Adjusting sound settings 16 Sound Settings 16 e Setup MEN cosiosicamnas asno prsutaaae 17 Setting the Time 17 Using the Sleep Timer 18 Setting the On Off Timer 18 Locking Programs 18 Other Features 20 Picture In Picture PIP 21 e SUpport MEMU aa 21 Check the Symbol Y This function can be used by pressing the Note Step by step guide TOOLS button on the remote control Important information Informs you how to access the menu English 3 Getting Started e Excellent Digital Interface amp Networking With a built in HD digital tuner nonsubscription HD broadcasts can be viewed without a cable box STB Set Top Box satellite receiver e Media Play Allows you to play music files pictures and movies saved on a USB device P 29 e AllShare Allows you to configure a mobile message server media render P 39 e Self Diagnosis You can check picture and sound operation P 21 Accessories amp Please make sure the following items are included with y
44. ear 5 1 channel audio connect the DIGITAL AUDIO OUT OPTICAL jack on the DVD Satellite Box i e Anynet Device 1 or 2 directly to the Amplifier or Home Theater not the TV Only one Home Theater can be connected You can connect an Anynet device using the HDMI cable Some HDMI cables may not support Anynet functions Anynet works when the AV device supporting Anynet is in the standby or on status Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type 3 6 English Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the TV Anynet Menu Description View TV Changes Anynet mode to TV broadcast mode Device List Shows the Anynet device list device_name MENU Shows the connected device menus E g If a DVD recorder is connected the disc menu of the DVD recorder will appear device_name INFO Shows the play menu of the connected device E g If a DVD recorder is connected the play menu of the DVD recorder will appear Recording recorder Starts recording immediately using the recorder This is only available for devices that support the recording function Stop Recording recorder Stops recording Receiver Sound is played through the receiver If more than one recording device is connected they are displayed as recorder and if only one recording device is connected it will be represent
45. ed as device_name D Setting Up Anynet MENU M gt Application gt Anynet HDMI CEC gt ENTER C E Setup Anynet HDMI CEC Off On To use the Anynet Function Anynet HDMI CEC must be set to On amp When the Anynet HDMI CEC function is disabled all the Anynet related operations are deactivated Auto Turn Off No Yes Setting an Anynet Device to turn off automatically when the TV is turned off amp If Auto Turn Off is set to Yes running external devices will turn off at the same time as the TV powers off However a device may not turn off if recording is in progress amp May not be enabled depending on the device i Switching between Anynet Devices 1 Anynet devices connected to the TV are listed amp If you cannot find a device you want press the red button to refresh the list 2 Select a device and press the ENTER button You can switch to the selected device amp Only when you set Anynet HDMI CEC to On in the Application menu the Device List menu appears e Switching to the selected device may take up to 2 minutes You cannot cancel the operation during the switching operation e If you have selected external input mode by pressing the SOURCE button you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List Aa Recording You can make a recording of a TV Program using a Samsung recorder 1 Select Recording amp When there are more tha
46. een depth E Dynamic Contrast Off Low Medium High Adjust the screen contrast H Shadow Detail Increase the brightness of dark images amp Disabled under PC mode E Gamma Adjust the primary color intensity E RGB Only Mode Off Red Green Blue Displays the Red Green and Blue color for making fine adjustments to the hue and saturation E Color Space Auto Native Adjust the range of colors available to create the image MH White Balance Adjust the color temperature for a more natural picture R Offset G Offset B Offset Adjust each color s red green blue darkness R Gain G Gain B Gain Adjust each color s red green blue brightness Reset Resets the White Balance to it s default settings E Flesh Tone Emphasize pink flesh tone E Edge Enhancement Off On Emphasize object boundaries Picture Options MENU gt Picture Picture Options gt ENTER CY In PC mode you can only make changes to the Color Tone Size and Auto Protection Time Normal Color Tone Size 16 9 Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Normal Film Mode Off 2 hours Auto Protection Time Move Enter 9 Return E Color Tone Cool Normal Warm1 Warm2 amp Warmi or Warm2 will be deactivated when the picture mode is Dynamic Settings can be adjusted and stored for each external device connected to a
47. er Function technology S tf Speaker Select is set to External Speaker Virtual Surround is disabled Dialog Clarity Off On standard sound mode only Dialog Clarity emphasizes voice while maintaining the background sound level Preferred Language digital channels only Digital TV broadcasts are capable of simultaneous transmission of many audio tracks for example simultaneous translations of the program into foreign languages amp You can only select a language among the ones being broadcasted Multi Track Sound MTS analog channels only H Mono Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal HM Stereo Choose for channels that are broadcasting in stereo E SAP Choose to listen to the Separate Audio Program which is usually a foreign language translation amp Depending on the particular program being broadcast you can listen to Mono Stereo or SAP Auto Volume Off Normal Night To equalize the volume level on each channel set to Normal E Night This mode provides an improved sound experience compared to Normal mode making almost no noise It is useful at night Speaker Select External Speaker TV Speaker A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver In this case set the TV to External Speaker lt When Speaker Select is set to External S
48. g You can play the video with Subtitles This function only works if the subtitles are the same file name as the video Y Audio You can enjoy video in one of supported languages as required The function is only Y enabled when stream type files which support multiple audio formats are played Stop Slide Show You can start or stop a Slide Show Y Start Slide Show Slide Show Speed You can select the slide show speed during the slide show Y Background Music You can set and select background music when watching a Slide Show v Zoom You can zoom into images in full screen mode y Rotate You can rotate images in full screen mode Y Information You can see detailed information about the played file S of v Settings Using the Setup Menu H Continuous Movie Play Help Resume Play On Off Select to display the help pop up message for continuous movie playback E Get DivX VOD registration code Shows the registration code authorized for the TV If you connect to the DivX web site and register you can download the VOD registration file If you play the VOD registration using Media Play the registration is completed amp For more information on DivX VOD visit www DivX com H Get DivX VOD deactivation code When DivX VOD is not registered the registration deactivation code is displayed If you execute this function when DivX VOD is registered the current DivX VOD registration is deactivated E Information Select to
49. g a wired or wireless connection A Connecting to a Wired Network You can attach your TV to your LAN using cable in three ways e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable See the diagram below The Modem Port on the Wall External Modem TV Rear Panel ADSL VDSL Cable TV HDMI IN Modem Cable LAN Cable e You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem Use Cat 5 cable for the connection See the diagram below The Modem Port on the Wall External Modem icine a TV Rear Panel ADSL VDSL Cable TV HDMI IN LAN Cable e Depending on how your network is configured you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The LAN Port on the Wall TV Rear Panel HDMIIN LAN Cable Ifyou have a Dynamic Network you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values
50. hannel search will start automatically For more information refer to Channel Auto Program P 12 Press the ENTER C button at any time to interrupt the memorization process Set the Clock Mode automatically or manually S tf you select the Auto set the daylight saving time Select the time zone where you live The connection method for the best HD screen quality is displayed Press the ENTER C button Time Menu Language English Caption On Security Network General PIP Off English 7 Connections Using an HDMI DVI Cable HD connection up to 1080p We recommend using the HDMI connection for the best quality HD picture Available devices DVD Blu ray player HD cable box HD satellite receiver STB BD DVD player HD cable Sat box e a HDMI OUT E E 7 m 2 3 HDMI IN 1 DVI 2 3 4 PC DVI AUDIO IN e When using an HDMI DVI cable connection you must use the HDMI IN 1 DVI jack for video A DVD Blu ray player HD cable box HD STB satellite receiver cable box or STB satellite receiver may require a DVI HDMI DVI to HDMI cable or DVI HDMI DVI to HDMI adapter The PC DVI AUDIO IN jack is required for audio e The picture may not display normally if at all or the audio may not work if an external device that uses an older version of
51. he point where the most recent user stopped playing he lt lt REW gt gt FF or 11 Pause buttons may not work depending on the content information amp tf you experience any file stuttering issue while playing a video over a wireless network we recommend using a wired network tt might not work properly with unlicensed multimedia files 3 Need to Know List before using Media Play MTP Media Transfer Protocol is not supported The file system supports FAT16 FAT32 and NTFS Certain types of USB Digital camera and audio devices may not be compatible with this TV Media Play only supports USB Mass Storage Class MSC devices MSC is a Mass Storage Class Bulk Only Transport device Examples of MSC are Thumb drives Flash Card Readers and USB HDD USB HUB are not supported Devices should be connected directly to the TV s USB port Before connecting your device to the TV please back up your files to prevent them from damage or loss of data SAMSUNG is not responsible for any data file damage or data loss Connect a USB HDD to the dedicated port USB 1 HDD port Do not disconnect the USB device while it is loading The higher the resolution of the image the longer it takes to display on the screen The maximum supported JPEG resolution is 15360X8640 pixels For unsupported or corrupted files the Not Supported File Format message is displayed f the files are sorted by Basic
52. he volume of both the TV and the system e 5 1 CH channel audio is available when the TV is connected to an external device supporting 5 1 CH e When the receiver home theater is set to on you can hear sound output from the TV s optical jack When the TV is receiving a DTV signal the TV will send 5 1 CH sound to the home theater receiver When the source is a digital component such as a DVD Blu ray player cable box STB Set Top Box satellite receiver and is connected to the TV via HDMI only 2 CH audio will be heard from the home theater receiver If you want to hear 5 1 CH audio connect the digital audio out jack from your DVD Blu ray player cable box STB satellite receiver directly to an amplifier or home theater amp AUDIO OUT Connects to the audio input jacks on your amplifier nome theater e When connecting use the appropriate connector sold separately e When an audio amplifier is connected to the AUDIO OUT jacks Decrease the volume of the TV and adjust the volume level with the amplifier s volume control Connecting to a PC Using an HDMI DVI Cable a D sub Cable PC OUT AUDIO OUT ena i 6 PC DVI AUDIO IN English 9 Connections Display Modes D Sub and HDMI DVI Input Optimal resolution is 1920X1080 60Hz Mode Resolution Horizontal Frequency KHz Vertical Frequency Hz Pixel Clock Frequency MHz Sync
53. is the case contact your Internet service provider Ifyou cannot connect to the Internet even after you have followed the procedures of your Internet service provider please contact Samsung Electronics at 1 800 SAMSUNG Media Play gt ae MediaPla Enjoy photos music and or movie files saved on c y 5 MEDIAP a USB Mass Storage Class MSC device and or E el your PC Q E o MENU I gt Application gt Media Play S ENTER CY E D n Wl sum A Change Device D View Devices CC Enter 9 Return a Connecting a USB Device 1 Turn on your TV TV Side Panel 2 Connect a USB device containing photo music and or movie files to the USB 1 HDD or USB 2 jack on the side or rear of the TV 3 When USB is connected to the TV popup window appears Then you can select Media Play PA USB Drive Connecting to the PC through network You can play pictures music and videos saved on your PC or on your TV through a network connection in the Media Play mode amp f you want to use Media Play to play files saved on your PC over your TV you should download PC Share Manager and users manual from www samsung com TV Side Pane ve aa or nie El E Samsung Wireless TV Rear Pane LAN Adapter External Modem ADSL VDSL Cabl Cf Wireless IP sharer LAN C
54. lled on your Samsung Mobile phone device to use this feature Doc Viewer can read files in doc format but cannot modify them The screen display may differ depending on the connected device la Bae Calendar Contacts Doc viewer 4 Select Mi Return Using your Samsung Phone to Operate Your TV Before you can use this feature you must connect to a Samsung mobile phone that supports ScreenShare functions When operating the TV with your mobile phone only the POWER VOL V CH A and MUTE buttons are supported amp Even if you keep pressing down on a control button channel or volume on the mobile phone the value will only go up or down by one unit Other Information Enclose the cables in the Cable tie so that the cables are not visible through the transparent stand Overly rigid or thick cables can damage input jacks over long term use Cable tie Anti theft Kensington Lock The Kensington Lock is not supplied by Samsung It is a device used to physically fix the system when using it in a public place The appearance and locking method may differ from the illustration depending on the manufacturer Refer to the manual provided with the Kensington Lock for additional information on proper use amp Please find a R icon on the rear of the TV A kensington slot is beside the R icon To lock the product follow these steps tte 1 Wrap the Kensington lock cable around a la
55. low these steps 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 26 Press the Y button to select Internet Protocol Setup and then press the ENTER C button Press the A or Y button to select Auto and then press the ENTER C button Press the A button to go to Select a Network and then press the ENTER 4 button The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the A or Y button to select a network and then press the ENTER C button Ifthe AP is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security Key to establish the connection If the Security PIN pop up appears go to Step 6 If the Network Connecting Screen appears go to Step 10 Press the A or Y button to select Security or PIN For most home networks you would select Security for Security Key The Security Screen appears Select a network Security Key C o en es ss a a als ais aiw us wv Number We ue a ug un u QU o Lower case ue ue iaa Ue Ue es Y El Delete al u e e e e e E Space gt Move 4 Enter 9 Return On the Security screen enter your network s Pass Phrase amp You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem To enter the Pass Phrase follow these general directions Press the number b
56. n input on the TV PSIZE HM Size Your cable box satellite receiver may have its own set of screen sizes as well However we highly recommend you use 16 9 mode most of the time 16 9 Sets the picture to 16 9 wide mode Zoom1 Use for moderate magnification Zoom2 Use for a stronger magnification Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen 4 3 Sets the picture to basic 4 3 mode amp Do not watch in 4 3 format for a long time Traces of borders displayed on the left right and center of the screen may cause image retention screen burn which are not covered by the warranty Screen Fit Displays the full image without any cut off when HDMI 720p 1080i 1080p or Component 1080i 1080p signals are input amp NOTE e After selecting Zoom1 Zoom2 or Wide Fit 1 Press the button to select Position 2 Press the ENTER 4 button 3 Pressthe A or Y button to move the picture up or down 4 Press the ENTER 4 button Press the button to select Reset 6 Press the ENTER 4 button to reset the picture to its default position a English 15 Ss9 n e94 9IS2g 0 Basic Features After selecting Screen Fit in HDMI 1080i 1080p or Component 1080i 1080p mode you may need to center the picture 1 Press the or button to select Position 2 Press the ENTER 4 button 3 Press the A Y or gt button to move the picture 4 Press the ENTER 4 button 5 P
57. n the source is a digital component such as a DVD and is connected to the TV via HDMI only 2 channel sound will be heard from the receiver amp NOTE e You can only control Anynet devices using the TV remote control not the buttons on the TV The TV remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not operate with other manufacturers products 0 Troubleshooting for Anynet Problem Possible Solution Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only Only one receiver home theater can be connected Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the TV remote control is in TV mode Check whether the remote control is Anynet compatible Anynet does not work in certain situations Searching channels operating Media Play or Plug amp Play initial setup etc e When connecting or removing the HDMI cable please make sure to search devices again or turn your TV off and on again e Check if the Anynet Function of Anynet device is set on want to start Anynet e Check if the Anynet device is properly connected to the TV and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu e Press the T
58. n two recording devices e When multiple recording devices are connected the recording devices are listed Select one recording device in the Device List amp When the recording device is not displayed select Device List and press the Red button to search devices 2 Press the EXIT button to exit amp You can record the source streams by selecting Recording device_name By Pressing the Le REC button will record whatever you are currently watching If you are watching video from another device the video from the device is recorded amp Before recording check whether the antenna jack is properly connected to the recording device To properly connect an antenna to a recording device refer to the recording device s users manual English 37 S93 N 894 psdueApy 0 Advanced Features a Listening through a Receiver You can listen to sound through a receiver i e Home Theater instead of the TV speaker 1 Select Receiver and set to On 2 Press the EXIT button to exit amp it your receiver supports audio only it may not appear in the device list 3 The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT OPTICAL jack of the TV amp When the receiver i e Home Theater is set to On you can hear sound output from the TV s Optical jack When the TV is displaying a DTV air signal the TV will send out 5 1 channel sound to the receiver Whe
59. ness Sharpness P 14 e Adjust Energy Saving option in the TV menu go to MENU Picture ECO Solution Energy Saving P 14 e Try resetting the picture to view the default picture setting go to MENU Picture Picture Reset P 16 There is a dotted line on the edge of the screen e Ifthe picture size is set to Screen Fit change it to 16 9 e Change cable satellite box resolution The picture is black and white e If you are using an AV composite input connect the video cable yellow to the Green jack of component input 1 on the TV When changing channels the picture freezes or is distorted or delayed e If connected to a cable box please try to reset it reconnect the AC cord and wait until the cable box reboots It may take up to 20 minutes e Set output resolution of the cable box to 1080i or 720p Sound Problem There is no sound or the sound is too low at maximum volume First of all please perform the Sound Test to confirm that your TV audio is properly operating e go to MENU Support Self Diagnosis Sound Test P 21 If the audio is OK the sound problem may caused by the source or signal e Please check the volume of the device Cable Sat Box DVD Blu ray etc connected to your TV The picture is good but there is no sound e Set the Speaker Select option to TV speaker in the Sound menu P 17 e If you are using an external device check the device s audio outp
60. nts conditions exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics SAMSUNG products and the requirements conditions exclusions and limitations contained herein SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada and in Canada on SAMSUNG products purchased in the United States for the warranty period originally specified and to the Original Purchaser only The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center Along with this Statement the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center Transportation to and rom the Service Center is the responsibility of the purchaser Conditions covered are limited only to manufacturing defects in material or workmanship and only those encountered in normal use of the product Excluded but not limited to are any originally specified provisions for in home or on site services minimum or maximum repair times exchanges or replacements accessories options upgrades or consumables For the location of a SAMSUNG Authorized Service Center please call toll free Inthe United States 1 800 SAMSUNG 1 800 726 7864 In Canada 1 800 SAMSUNG Still image warning Avoid displaying still images such as jpeg picture files or still image elements such as TV channel logos pano
61. nu English 47 UOIJEULIOJU JOYIO GO Other Information O Dimensions OOOO O E Front view side view k O gt i A vy lt 0 Unit inches Model name 1 O O 4 5 O 7 3 LN382C550 31 2 27 5 15 5 17 5 19 5 21 9 3 1 9 4 LN37C550 35 9 32 3 18 2 20 5 22 24 5 3 10 LN40C550 38 6 35 19 7 20 5 23 5 26 3 2 10 LN46C550 43 8 40 1 22 6 21 7 26 5 29 3 2 10 8 E Jack panel detail rear view ian rete 2 al o oY a 45 a fI Fo Unit inches Model name 4 2 3 4 5 6 LN32C550 9 3 2 0 3 8 20 9 7 9 7 9 LN37C550 12 4 3 2 3 3 24 6 7 9 7 9 LN40C550 13 2 3 7 4 0 27 6 7 9 7 9 LN46C550 16 1 3 7 4 0 31 8 15 7 15 7 NOTE All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your TV Not responsible for typographical or printed errors O 2010 Samsung Electronics America Inc 48 English A AllShare Antenna Anynet AUDIO OUT Auto Adjustment Auto Program B Blanking Bracket Balance C Cables Cable Tie Caption Clear Scrambled Channel Clear Voice Component Composite D Device List DIGITAL AUDIO OUT DST Daylight Saving Time D sub Dynamic Contrast
62. o select Setup and then press the ENTER C button 3 Usethe A or Y button to select Network in the Setup menu and then press the ENTER C button On the Network screen select Network Type 5 Set Network Type to Wireless 6 Select Network Setup The Network Setup screen appears Select a network Not Selected Internet Protocol Setup Auto IP Address tg Subnet Mas HEE Gateway HEE DNS Auto DNS Server HEE A PBC WPS Move C Enter 5 Return 7 Press the Red button on your remote Press the PBC WPS button on your router within 2 minutes Your TV player automatically acquires all the network setting values it needs and connects to your network 9 After the network connection is set up press the RETURN button to exit the Network Setup screen Network Setup Auto Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the setup process How to set up automatically To set up the wireless connection automatically fol
63. on the menu Use these buttons in Media Play and Anynet modes controls recording on Samsung recorders with the Anynet feature rower ONO FE SOURCE lt Installing batteries Battery size AAA a AOS e e a ELETTEL dag 6 English i l SAMSUNG amp NOTE Turns the remote control light on and off When on the buttons become illuminated for a moment when pressed Using the remote control with this button set to off will reduce the battery usage time Returns to the previous channel Cut off the sound temporarily Changes channels Displays the main on screen menu Displays Favorite Channel Lists on the screen P 12 Press to display information on the TV screen P 17 Exit the menu Buttons used in the Channel list Media Play menu etc S MODE Selects the sound mode P 16 SLEEP Automatically shuts off the TV at a preset time P 18 MTS Press to choose stereo mono or Separate Audio Program SAP broadcast P 17 P MODE Selects picture mode P 14 P SIZE Choose the picture size P 15 CC Controls the caption decoder P 20 e Use the remote control within 23 feet from the TV Bright light may affect the performance of the remote control Avoid use when nearby fluorescent lights or neon signs The color and shape may vary depending on the model Connecting to an
64. one with each field use the button to move successively to the next field You can also use the other arrow buttons to move up down and back 6 Enter the IP Address Subnet Mask and Gateway values 7 Press the A or Y button to go to DNS 8 Press the Y button to go to the first DNS entry field Enter the numbers as above 9 When done press the A button to go to Select a Network Select your network and then press ENTER C button 10 Go to Step 4 in the How to set up automatically P 27 and follow the directions from that point on 28 English If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address a unique identifying number of your PC or modem which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access As your TV has a different MAC address your ISP can not authenticate its MAC address and your TV can not connect To resolve this problem ask your ISP about the procedures required to connect devices other than a PC such as your TV to the Internet If your Internet service provider requires an ID or password to connect to the Internet your TV may not be able to connect to the Internet If this is the case you must enter your ID or password when connecting to the Internet The internet connection may fail because of a firewall problem If this
65. onnect How to connect an existing Ad hoc device 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 26 Choose Select a network Then the device list will be displayed Select the device you want in the Device list If security key was applied input the security key amp If network does not operate normally check the Network Name SSID and Security Key again An incorrect Security Key may cause a malfunction English 27 S93 N 894 psdueApy 0 Advanced Features Network Setup Manual If the other methods do not work you need to enter the Network setting values manually Getting the Network Connection Values To get the Network setting values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen In the pop up menu click Status On the dialog that appears click the Support tab 4 On the Support tab click the Details button The Network settings are displayed How to set up manually To enter the Network connection values manually follow these steps 1 Follow Steps 1 through 6 in the How to set up using PBC WPS P 26 2 Press the Y button to select Internet Protocol Setup and then press ENTER C button Press the A or Y button to select Manual and then press ENTER C button 3 Press the Y button to go to the first entry field IP Address 4 Use the number buttons to enter numbers 5 When d
66. ore First of all please perform the Picture Test and confirm that your TV is properly displaying the test image e go to MENU Support Self Diagnosis Picture Test P 21 If the test image is properly displayed the poor picture may be caused by the source or signal e If you have an analog cable satellite box upgrade to a digital set top box Use HDMI or Component cables to deliver HD high definition picture quality e Cable Satellite subscribers Try HD stations from the channel line up e Air Cable Antenna connection Try HD stations after performing Auto program amp Many HD channels are upscaled from SD Standard Definition contents e Adjust the Cable Sat box video output resolution to 1080i or 720p The picture is distorted macroblock error small block dots pixelization e Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies e Low signal level can cause picture distortion This is not a TV problem e Mobile phones used close to the TV up to 3 3 ft may cause noise in picture on analog and digital TV Color is wrong or missing e If you re using Component connection make sure the component cables are connected to the correct jacks Incorrect or loose connections may cause color problems or a blank screen There is poor color or brightness e Adjust the Picture options in the TV menu go to Picture mode Color Bright
67. ote to enter numbers and the arrow buttons to move from one entry field to another 5 When done press the RETURN button on your remote 6 Select Network Test to check the Internet connectivity Connecting to a Wireless Network To connect your TV to your network wireless you need a wireless router or modem and a Samsung Wireless LAN Adapter WISO9ABGN WISO9ABGN2 WIS10ABGN which you connect to your TV s back or side panel USB jack See the illustration below The LAN Port on TV Side Panel id Y NIGH Wireless IP sharer AP having DHCP Server el K Samsung Wireless LAN Adapter or TV Rear Panel l O USB2 9 the Wall LAN Cable Samsung s Wireless LAN adapter is sold separately and is offered by select retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11A B G and N communication protocols Samsung recommends using IEEE 802 11N When you play video over a IEEE 802 11B G connection the video may not play smoothly SA NOTE You must use the Samsung Wireless LAN Adapter WISO9ABGN WISO9ABGN2 WIS1OABGN to use a wireless network Samsung Wireless LAN Adapter and The USB extension Cable are sold separately and are offered by select retailers Ecommerce sites and Samsungparts com To use a wireless network your TV must be connected to a wireless IP sharer either a router or a modem
68. our LCD TV If any items are missing contact your dealer amp The items colors and shapes may vary depending on the models e Remote Control BN59 01041A amp Batteries AAA x 2 e Cleaning Cloth BN63 01798B e Owners Instructions e Power Cord e Warranty Card Safety Guide Quick Setup Guide D 46inch TV e Blanking Bracket BN63 06339A e Holder Ring 4ea LN32C550 BN63 06389A ee SHED Bose 20 BN61 04529A Installing the LCD TV Stand Components When installing the stand use the provided components and parts a g 9EA M4 X L12 Stand 1 EA Guide Stand 1 EA Screws 4 English LO payuejs Buen Q Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them amp Make sure that at least two persons lift and move the LCD TV Stand the product up and fasten the screws If you fasten the screws with the LCD TV placed down it may lean to one side Viewing the Control Panel The product color and shape may vary depending on the model Remote control sensor Power Indicator SOURCES MENU VOL V CHA Q Speakers Power Turns the TV on or off Remote control sensor Aim the remote control towards this spot on the TV SOURCE EY Toggles between all the available input sources In the on screen menu use this button as you would use the ENTE
69. peaker the volume and MUTE buttons will not operate and the sound settings will be limited amp When Speaker Select is se should use these settings TV Speaker Off External Speaker On 3 When Speaker Select is se should use these settings TV Speaker On External Speaker On o External Speaker you o TV Speaker you amp If there is no video signal both speakers will be mute SPDIF Output SPDIF Sony Philips Digital Interface is used to provide digital sound reducing interference going to speakers and various digital devices such as a DVD player E Audio Format During the reception of a digital TV broadcast you can select the Digital Audio output SPDIF format from the options PCM or Dolby Digital amp By connecting to 5 1ch speakers in a dolby digital setup maximize your interactive 3D sound experience E Audio Delay Correct audio video mismatch when watching TV or video and listening to digital audio output using an external device such as an AV receiver Oms 250ms Sound Reset Reset all sound settings to the factory defaults fi Setting the Time MENU I gt Setup gt Time gt ENTERC Time The current time will appear every time you press the INFO button H Clock Setting the clock is for using various timer features of the TV Q tf you disconnect the power cord you have to set the clock again Clock Mode Set up the current time manually or automatically Au
70. rama or 4 3 image format stock or news bars at screen bottom etc on the screen Constant displaying of still pictures can cause ghosting of LCD screen which will affect image quality To reduce risk of this effect please follow below recommendations e Avoid displaying the same TV channel for long periods e Always try to display any image on full screen use TV set picture format menu for best possible match e Reduce brightness and contrast values to minimum required to achieve desired picture quality exceeded values may speed up the burnout process e Frequently use all TV features designed to reduce image retention and screen burnout refer to proper user manual section for details Securing the Installation Space Keep the required distances between the product and other objects e g walls to ensure proper ventilation Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product amp When using a stand or wall mount use parts provided by Samsung Electronics only Ifyou use parts provided by another manufacturer it may result in a problem with the product or an injury due to the product falling amp The appearance may differ depending on the product amp Be careful when you contact the TV because some parts can be somewhat hot Installation with a stand Installation with a wall mount 4inches 1 1 1 1 1 i 4inches 4inches
71. reful not to disconnect the power q D or remove the USB drive until or upgrades are complete The TV will be turned off and on automatically after completing the firmware upgrade When software is upgraded video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade TV Rear Panel USB Drive 2 2 English E By Online Upgrade the software using the Internet First configure your network For detailed procedures on using the Network Setup refer to the Network Connection instructions amp Ifthe Internet connection does not operate properly the connection may be broken Please retry downloading If the problem persists download by USB and upgrade H Alternative Software backup Displays the Software version downloaded through By Online During the software upgrading When the Upgrade will discontinue from last step this function be activated HD Connection Guide Refer to this information when connecting external devices to the TV Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software Advanced Features You can set up your TV so that it can access the Internet through your local area network LAN usin
72. ress the lt or gt button to select Reset 6 Press the ENTER 4 button e HD High Definition 16 9 1080i 1080p 1920x1080 720p 1280x720 e Settings can be adjusted and stored for each external device you have connected to an input on the TV Input Source Picture Size ATV AV 16 9 Zoom Component 480i 480p Zoom2 4 3 DTV 1080 16 9 4 3 Wide Fit Component 1080i 1080p Screen Fit HDMI 720p 1080i 1080p PC 16 9 4 3 E Digital Noise Filter Off Low Medium High Auto Auto Visualization If the broadcast signal received by your TV is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen amp When the signal is weak try other options until the best picture is displayed Auto Visualization When changing analog channels displays signal strength 4 Only available for analog channels A When bar is green you are receiving the best possible signal E MPEG Noise Filter Off Low Medium High Auto Reduces MPEG noise to provide an improved picture quality amp Disabled under PC mode HDMI Black Level Normal Low Selects the black level on the screen to adjust the screen depth _ Available only in HDMI mode RGB signals E Film Mode Off Auto1 Auto2 Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality _ Avail
73. rge stationary object such a Ra i as desk or chair s O 2 Slide the end of the cable with the lock attached through the looped end Was gt of the Kensington lock cable R A 3 Insert the locking device into the Kensington slot on the product 4 Lock the lock amp These are general instructions For exact instructions see the User lt Optional gt manual supplied with the locking device The locking device has to be purchased separately amp The location of the Kensington slot may be different depending on the TV model Installing the Wall Mount Assembling the Blanking Bracket When installing the TV onto a wall attach the Blanking Bracket as shown ts f Preparing before installing Wall Mount 46inch TV To install a wall mount from another manufacturer use the Holder Ring English 4 1 uonewuoyuj JOUIO GO Other Information Installing the Wall Mount Kit The wall mount kit sold separately allows you to mount the TV on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount items Contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own Wall Mount Kit Specifications VESA amp The wall mount kit is not supplied but sold separately Install your wall mount
74. rt the slide show All files in the file list section will be displayed in the slide show During the slide show files are displayed in order Music files can be automatically played during the Slide Show if the Background Music is set to On 3 The BGM Mode cannot be changed until the BGM has finished loading gt Movie 01 avi E suv 2 gt Normal Be sun 00 04 03 00 07 38 S93 N 894 psdueApy 0 Resumes playing from the last viewed scene E 4 Pause lt gt Jump 1 Tools 5 Return 4 Pause lt p Previous Next 4 Tools 9 Return English 33 Advanced Features D Playing Multiple Files Playing selected video music photo files 1 Press the Yellow button in the file list to select the desired file 2 Repeat the above operation to select multiple files NOTE The y mark appears to the left of the selected files e To cancel a selection press the Yellow button again e To deselect all selected files press the TOOLS button and select Deselect All 3 Press the TOOLS button and select Play Selected Contents Movie 01 avi BD Movie 05 avi me SUM JA Change Device Playing the video music photo file group 1 While a file list is displayed move to any file in desired group 2 Press the TOOLS button and select Play Current Group a Media Play Additional Functions Sorting the file list Press the Blue button in the file list to
75. ss Allow otherwise press Deny You can also change the setting or resetting of this feature at AllShare Setup Warning Please note that if your device is connected to unsecured or unfamiliar network unwanted or inappropriate contents might be played If you are not sure about the network s identity or content s appropriateness we strongly recommend that you do not Allow the request to play a To turn off the media contents transmission from the mobile phone set Media to Off in the AllShare setup Contents may not be played on your TV depending on their resolution and format The ENTERC and lt gt buttons may not work depending on the type of media content Using the mobile device you can control the media playing For details refer to each mobile s user s guide e When you want to play media contents from your PC select the PC icon on the main display of AllShare Then the TV s Media Play menu automatically changes For more detail information refer to Media Play P 29 40 English Using ScreenShare Function Using ScreenShare you can browse various web contents provided by the mobile phone For example the image below displays an access page for contents on a mobile You can read the mobile s files and view the phone book and Calendar on the TV Also in the phone book you can make a Call to another person or send to SMS amp NOTE e You must have ScreenShare insta
76. t ratio of the screen width to height are primarily designed to view wide screen format full motion video The images displayed on them should primarily be in the wide screen 16 9 ratio format or expanded to fill the screen if your model offers this feature and the images are constantly moving Displaying stationary graphics and images on screen such as the dark sidebars on nonexpanded standard format television video and programming should be limited to no more than 5 of the total television viewing per week Additionally viewing other stationary images and text such as stock market reports video game displays station logos web sites or computer graphics and patterns should be limited as described above for all televisions Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle but permanent burned in ghost images in the LCD picture To avoid this vary the programming and images and primarily display full screen moving images not stationary patterns or dark bars On LCD models that offer picture sizing features use these controls to view different formats as a full screen picture Be careful in the selection and duration of television formats used for viewing Uneven LCD aging as a result of format selection and use as well as burned in images are not covered by your Samsung limited warranty e SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requireme
77. the caption The default is Black Foreground Opacity This adjusts the opacity of text Options include Default Transparent Translucent Solid and Flashing Background Opacity This adjusts the opacity of the caption background Options include Default Transparent Translucent Solid and Flashing Return to Default This option sets each Size Font Style Foreground Color Background Color Foreground Opacity and Background Opacity to its default NOTE e Digital Caption Options are available only when Default and Service1 Service6 can be selected in Caption Mode The availability of captions depends on the program being broadcasted The Default setting follow the standards set by the broadcaster The Foreground and Background cannot be set to have the same color You cannot set both the Foreground Opacity and the Background Opacity to Transparent Network Network Type Network Setup Network Test For details on set up options refer to the Network Connection instructions P 23 28 General H Game Mode Off On When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience selecting the game menu amp NOTE e Precautions and limitations for game mode To disconnect the game console and connect another external device set Game Mode to Off in the setup menu If you display the TV menu in Game Mode the screen shakes slightly
78. the picture settings will automatically adapt to the light in the room amp Ifyou adjust the Backlight the Eco Sensor will be set to Off Min Backlight When ECO Sensor is On the minimum screen brightness can be adjusted manually amp If Eco Sensor is On the display brightness may change become slightly darker in most cases depending on the surrounding light intensity H No Signal Power Off Off 15 min 30 min 60 min Sets how quickly the TV switches to standby mode if no picture is being received amp Disabled when the PC is in power saving mode E Setting up the TV with your PC Set the input source to PC Auto Adjustment MENU II gt Picture gt Auto Adjustment gt ENTERCS Adjust frequency values positions and fine tune the settings automatically 3 Not available when connecting through HDMI DVI cable Screen E Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone then adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced readjust the picture so that it is aligned to the center of screen HE Position Adjust the PC s screen positioning if it does not fit the TV screen Press the A or Y button to adjust the Vertical Position Press the or button to adjust the Horizontal Position E Image Reset Resets the image to default settings Using Your TV as a Computer PC Display Set
79. ting Up Your PC Software Based on Windows XP Depending on the version of Windows and the video card the actual screens on your PC will probably look different but the same basic set up information will apply in most cases If not contact your computer manufacturer or Samsung Dealer 1 Click on Control Panel on the Windows start menu 2 Click on Appearance and Themes in the Control Panel window and a display dialog box will appear 3 Click on Display and a display dialog box will appear 4 Navigate to the Settings tab on the display dialog box e The correct size setting resolution Optimum 1920 X 1080 pixels e f a vertical frequency option exists on your display settings dialog box the correct value is 60 or 60 Hz Otherwise just click OK and exit the dialog box Changing the Picture Options Advanced Settings MENU I gt Picture Advanced Settings gt ENTER 4 available in Standard Movie mode Compared to previous models new Samsung TVs have more precise pictures amp In PC mode you can only make changes to Dynamic Contrast Gamma and White Balance Advanced Settings Black Tone Off gt Dynamic Contrast Medium Shadow Detail 0 Gamma 0 RGB Only Mode Ot Color Space Native White Balance v Move Enter 5 Return E Black Tone Off Dark Darker Darkest Select the black level to adjust the scr
80. tion so it matches the resolutions supported by the TV PC is always shown on the source list even if a PC is not connected e This is normal PC is always shown on the source list regardless of whether a PC is connected The video is OK but there is no audio e f you are using a HDMI connection check the audio output setting on your PC Network Connection The wireless network connection failed e Samsung Wireless USB dongle is required to use a wireless network e Make sure the Network Connection is set to Wireless P 25 e Make sure the TV is connected to a wireless IP sharer Router Software Upgrade over the network fails e Try network test in Setup menu P 26 e Ifyou have latest SW version SW upgrade will not proceed Others Purple green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection e Remove the left and right audio connections from the set top box If the buzzing stops this indicates that the set top box has a grounding issue Replace the Component video cables with an HDMI connection The picture will not display in full screen e HD channels will have black bars on either side of the screen when displaying upscaled SD 4 3 contents e Black bars on Top amp Bottom will be shown on movies that have aspect ratios different from your T e Adjust picture size option on your external device or TV to full screen
81. to Set the current time automatically using the time from a digital channel amp The antenna must be connected in order to set the time automatically Manual Set the current time manually amp Depending on the broadcast station and signal the auto time set up may not be correct In this case set the time manually English 17 s n e y 9ISeg g0 Basic Features Clock Set Set the Month Day Year Hour Minute and am pm amp Available only when Clock Mode is set to Manual amp You can set the Month Day Year Hour and Minute directly by pressing the number buttons on the remote control DST Off On Switches the DST Daylight Saving Time function on or off amp This function is only available when the Clock Mode is set to Auto Time Zone Select your time zone amp This function is only available when the Clock Mode is set to Auto Eg Using the Sleep Timer MENU gt Setup Time gt Sleep Timer gt ENTER Ce suce E Sleep Timer Automatically shuts off the TV after a preset period of time 80 60 90 120 150 and 180 minutes amp To cancel the Sleep Timer select Off i Setting the On Off Timer MENU II gt Setup gt Time gt Timer 1 gt ENTER C E Timer 1 Timer 2 Timer 3 Three different on off timer settings can be made You must set the clock first On Time 12 00 am Off Time 12 00 am Volume Source Antenna Channel Tue Wed Thu
82. to select Stop 2 Press the button to select Yes 3 Press the ENTER C button 83 This function is only available in Cable mode Channel List MENU MM gt Channel gt Channel List ENTER C Channel List Option Menu Set each channel using the Channel List menu options Add Delete Timer Viewing Select All Deselect All Option menu items may differ depending on the channel status 1 Select a channel and press the TOOLS button 2 Select a function and change its settings E Add Delete Delete or add a channel to display the channels you want NOTE gt All deleted channels will be shown on the All Channels menu e Agray colored channel indicates the channel has been deleted The Add menu only appears for deleted channels Delete a channel from the Added Channels or Favorite menu in the same manner E Timer Viewing You can set a desired channel to be displayed automatically at the set time even when you are watching another channel Set the current time first to use this function P 17 1 Press the 4 gt A Y buttons to select the desired channel in Channel List 2 Press the TOOLS button then select Timer Viewing 3 Scroll up or down to adjust the settings in the box or use the numeric buttons on your remote for entering the date and time Ifyou selected Once Every Week or Every Day in Repeat you can enter the date you want 4 Select OK then press the ENTER 4 button
83. tput e Connect the optical cable between TV and the receiver through the receiver 38 English MENU MM gt Application gt AllShare ENTER fi About AllShare AllShare connects your TV and compatible Samsung mobile phones devices through a network On your TV you can view call arrivals SMS messages and schedules set on your mobile phones In addition you can play media contents including videos photos and music saved on your mobile phones or the other devices such as your PC by controlling them on the TV via the network Additionally you can use your TV for browsing web pages in your mobile phones For more information visit www samsung com or contact the Samsung call center Mobile devices may need additional software installation For details refer to each device s user s guide Ml Setting Up AllShare Setup E Message On Off Enables or disables the message function for call arrivals SMS messages and schedules set on your mobile phones H Media On Off Enables or disables the media function When the media function is on it plays videos photos and music from a mobile phone or other device that supports AllShare HM ScreenShare On Off Enables or disables the ScreenShare function for using mobile phone as a remote control E TV name Sets the TV name so you can find it easily on a mobile device amp Ifyou select User Input you can type on the TV using the OSK
84. ut option ex you may need to change your cable box s audio option to HDMI when you have a HDMI connected to your TV e If you are using a DVI to HDMI cable a separate audio cable is required e Reboot the connected device by reconnecting the device s power cable The speakers are making an inappropriate noise e Check the cable connections Make sure a video cable is not connected to an audio input e For Antenna or Cable connections check the signal information Low signal level may cause sound distortion e Perform the Sound Test as explained above 44 English Issues Solutions and Explanations No Picture No Video The TV will not turn on e Make sure the AC power cord is securely plugged into the wall outlet and the TV e Make sure the wall outlet is working e Try pressing the POWER button on the TV to make sure the problem is not the remote If the TV turns on refer to Remote control does not work below The TV turns off automatically e Ensure the Sleep Timer is set to Off in the Setup menu P 18 e If your PC is connected to the TV check your PC power settings UOIJEULOJU JOYIO GO e Make sure the AC power cord is plugged in securely to the wall outlet and the TV e When watching TV from an antenna or cable connection the TV will turn off after 10 15 minutes if there is no signal There is no picture video e Check cable connections remove and reconnect all c
85. uttons on your remote to enter numbers Use the direction buttons on your remote to move from button to button on the Security Key screen Press the Red button to change case or display symbols characters To a enter letter or symbol move to the letter or symbol and then press the ENTER C button To delete the last letter or number you entered press the Green button on your remote 10 11 When dore press the Blue button on your remote The Network Connecting screen appears Wait until the connection confirmation message is displayed and then press the ENTER C button The Network Setup screen re appears To test the connection press the RETURN button to select Network Test and then press the ENTER 4 button Network Setup Ad Hoc You can connect to a mobile device without an access point through the Samsung Wireless LAN Adapter by using a peer to peer network How to connect to new Ad hoc 1 Follow Steps 1 through 6 in the How to set up using PBO WPS P 26 Choose Select a network A list of devices networks appears While in the device list press the Blue button on the remote amp The message Ad hoc is a direct WI Fi connection with cellphone or PC The existing network system may have limited functionality Do you want to change the network connection is displayed Input the generated Network Name SSID and Security Key into the device you want to c
86. view information about the connected device English 35 Advanced Features What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung TV s remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it To connect to a Samsung Home Theater Anynet Anynet TV Home Theater Device 1 Device 2 3 4 A ee gt E i A HDMI OUT DIGITALAUDIOIN HDMI OUT HDMI Cabl Optical Cable HDMI Cable HDMI Cable 1 Connect the HDMI IN 1 DVI 2 3 or 4 jack on the TV and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable 2 Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet device using an HDMI cable amp NOTE Connect the Optical cable between the DIGITAL AUDIO OUT OPTICAL jack on your TV and the Digital Audio Input on the Home Theater e When following the connection above the Optical jack only outputs 2 channel audio You will only hear sound from the Home Theater s Front Left and Right speakers and the subwoofer If you want to h
87. your TV needs to access the Internet so you do not have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your TV s Cable Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer amp You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses English 23 S93 N 894 psdueApy 0 Advanced Features Network Setup Auto Use the Automatic Network Setup when connecting your TV to a network that supports DHCP To set up your TV s cable network connection automatically follow these steps How to set up automatically 1 Connect your TV to your LAN as described in the previous section 2 Turn on your TV press the MENU button on your remote use the A or Y button to select Setup and hen press the ENTER C button 3 Usethe A or Y button to select Network in the Setup menu and then press the ENTER C button The Network screen appears Network Type Wired gt Network Setup Network test Move 4 Enter 9 Return 4 On the Network screen select Network T
88. ype 5 Set Network Type to Wired 6 Select Network Setup The Network Setup screen appears P Network Setup Internet Protocol Setup Auto gt IP Address fe gy EEEE CE g g Auto EEEE Move 4 Enter 9 Return Set Internet Protocol Setup to Auto Auto acquires and enters the needed Internet values automatically 9 Wait two minutes and then press the RETURN button on your remote 10 If the Network Function has not acquired the network connection values go to the directions for Manual 24 English Network Setup Manual Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address Getting the Network Connection Values To get the Network connection values on most Windows computers follow these steps 1 Right click the Network icon on the bottom right of the screen 2 In the pop up menu that appears click Status 3 On the dialog that appears click the Support tab 4 Onthe Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your TV s cable network connection manually follow these steps 1 Follow Steps 1 through 6 in the How to set up automatically procedure Set Internet Protocol Setup to Manual Press the Y button on your remote to go to the first entry field 4 Enter the IP Address Subnet Mask Gateway and DNS Server values Use the number buttons on your rem
89. ze M4xL20 or similar to the wall or cabinet where the TV is to be installed amp If you fasten the screw to the wall we recommend you drive the screw into a stud If that is not possible use a molly to anchor the screw 3 Tie the TV Holder cord to the screw fastened to the wall or cabinet so that the TV is fixed See the illustrations below amp Install the TV close to the wall so that it does not fall lt When attaching the TV Holder cord to the wall tie the cord level with the ground or slanted downwards for safety purposes Check the cord occasionally to make sure it is secure amp Before moving the TV separate the connected cord first 4 Verify all connections are properly secured Periodically check the connections for any sign of fatigue or failure If you have any doubt about the security of your connections contact a professional installer To purchase the TV Holder Kit contact Samsung Customer Care In the United States 1 800 Samsung 1 800 726 7864 In Canada 1 800 Samsung 1 800 726 7864 English 43 UOIJEULIOJU JOYIO GO Other Information If the TV seems to have a problem first try this list of possible problems and solutions If none of these troubleshooting tips apply visit samsung com then click on Support or call Samsung customer service at 1 800 SAMSUNG Issues Solutions and Explanations Poor picture The TV image does not look as good as it did in the st
Download Pdf Manuals
Related Search
Related Contents
Page 1 Curtis DVD1071UK User's Manual Índice de contenidos NPP-6X2.4 and NPP-6X2.4 -SCT User Manual 47inch CL-47SMH10_20 Sega Soccer Slam for Xbox チェンソー取扱説明書 - Husqvarna VVW Manual 1.6 - Drastic Technologies Lenovo IdeaPad S206 Copyright © All rights reserved.
Failed to retrieve file