Home

ONKYO CS-545

1. pee cXeXexe buttons 11 OIE DISPLAY O OE Tears mvo wazy MEY QOO tet l MENU CLEAR Prg mEn we m m FLOS OQO INPUT gt S8C Select the preset you want to name see page 39 Press the MENU CLEAR button and then use the kaa gt gt buttons to select Name In Press ENTER Press the DISPLAY button repeatedly to select one of the following character groups e A for uppercase letters e a for lowercase letters e 1 for numbers ed i m e Selecting letters Press the number buttons repeatedly to select the available letters For example press the 2 button repeatedly to select A B C or 2 e Selecting numbers and symbols Use the number buttons to select numbers Press the gt 10 button repeatedly to select 2 amp OL Note Not all of the symbols can be entered by using the number buttons Use the ka a gt buttons to select from the full range of symbols 39 Listening to the Radio Continued e Deleting characters To delete characters press the CLEAR button The character at the cursor position will be deleted If there is no character at the cursor position or to the right of it the character to the left of the cursor will be deleted e To continue inputting characters assigned to same button Use the INPUT B button move the cursor and input
2. mE Artist name Name of the album if tag present ARTIST Album name Name of the album if tag present ALBUM Notes e Ifthere is no data Unknown Title Unknown Artist or Unknown Album will be displayed To display the disc name press the DISPLAY button while playback is stopped e Ifa file or folder name contains any characters that cannot be displayed File_n or Folder_n will be displayed n is a file or folder number e TIfatitle artist or album name contains any characters that cannot be displayed a centered dot will be displayed in place of those characters Various Playbacks You can combine Random Repeat and Memory playback One Folder Playback Normally all of the MP3 WMA files in all of the folders on the disc are played With 1 folder playback only the MP3 WMA files in the specified folder are played SSS O0O0 OOOE I DISPLAY MODE Q00 ee Oc ENTER Q mola S O oO ay 1 Press the MODE button repeatedly until the 1FOLDER 1FOLD indicator appears 2 Use the ka gt gt buttons to select the folder You can select any folder that contains MP3 WMA files 23 Disc Playback Continued 3 To start playback press the ENTER or P E button Playback will start with the first MP3 WMA file in the specified folder and cont
3. Pod FE While a music file is in pause state iPod will appear iPod iPhone Playback Continued Setting for iPod iPhone dl Remove the iPod 2 Press MENU 3 Select the desired setting item with the kaa gt buttons 4 Press ENTER 5 Select the desired selection with the kaa gt buttons 6 Press ENTER Preferences Charging Select the method for charging iPod which inserted to the CD receiver s dock during the standby state To Full Fully charge the iPod and then shift to default the complete standby state Ever Always feed the power to iPod Notes e If To Full is set the charging stops automatically when iPod is fully charged To start the charging again remove and set iPod or restart the CD receiver e Select Ever if keep standby state for a long time with inserting iPhone in the CD receiver s dock The maximum power consumption during iPod charging may be 23 W Info Scroll Select the method of scrolling the titles displayed at the start of playback Not Display The title is not displayed Once The title is displayed once and then the playback time is displayed Repeat The title is repeatedly displayed default TV Out On Select to turn the iPod TV Out setting default on No Change Does not change the iPod TV Out setting Dimmer Select the CD receiver s display brightness Off Normal de
4. Signal Quality Displays the signal quality 0 59 Poor reception 60 79 Good reception 80 100 Excellent reception 248 Sensitivity Display the sensitivity of reception Keep 100 for good reception DAB Setup CR 545UKD Use the following functions and settings to set up DAB digital radio Press the MENU CLEAR button repeatedly until the item to be set appears Press ENTER The items are explained below Auto Scan This setting determines which DAB frequency range of Band III is scanned by the Auto Scan function see page 35 UK Band III 11B 12D default All Band 3 Band III SA 13F Listening to the Radio Continued Tuning Aid With the Tuning Aid you can adjust the position and direction of the DAB antenna see page 34 for adjusting the antenna while monitoring the signal strength on the display If the letter B appears on the display it means the signal strength is Bad If the letter G appears it means the signal strength is Good To make the letter G appear adjust the antenna to get the best signal strength Use the lt lt gt gt buttons to select other multiplexes Band II 5A 13F Multiplex Number G Good or B Bad St Order With this setting you can change the order of stations in the station list Use the lt lt gt buttons to select the following options and then press
5. 33 Listening to the Radio Tuning into FM AM Radio Stations AB O l l 2l MODE MODE 0 3 2 O0 Oi OQO OOO 0 0 TUNER lt lt gt gt When tuned into a station the Tuned e d indicator appears When tuned into a stereo FM station the FM Stereo indicator appears as well gt oa AUTO m Stereo AUTO Pea FMST Tuning into Weak Stereo FM Stations If the signal from a stereo FM station is weak it may be impossible to get good reception In this case switch to mono mode with MODE button and listen to the station in mono 1 Press the TUNER button repeatedly to select FM or AM AM is only for CR 545 2 Press and hold down the lt lt gt buttons until frequency runs and then release Once a station is found tuning stops automatically Radio frequency can be changed in 0 05 MHz steps for FM and 9 kHz step for AM 34 Adjusting the Antennas Adjusting and installing the DAB FM antenna Choose a location for the FM antenna while listening to an FM station For CR 545UKD adjust the DAB antenna in the same way 1 Change the direction of the antenna to achieve the best reception 2 CR 545 CR 545UKD For details see page 37 Tuning Aid Affix the antenna with a thumbtack Do not push the thumbtack through the antenna Caution Be ca
6. Use the ke gt P buttons again to select the last day and then press ENTER Use the ka gt buttons to specify the On time and then press ENTER You can also use the remote controller s number buttons to enter the time For example to enter 7 29 press 7 2 and 9 Note Once the On time is set the Off time is automatically set to one hour later Use the ke gt I buttons to specify the Off time and then press ENTER Use the ka gt buttons to specify the CD receiver s volume level for the timer setting and then press ENTER To keep the latest volume level for the timer setting press kdd button repeatedly until TimerVol Lst appears on the display and set Timer indicator 1 2 3 or 4 will light up Timer T Oz Number f programmed timer Press the ON STANDBY button to set the CD receiver to Standby Notes e Be sure to set the CD receiver to Standby otherwise the timed operation will not work e While a timed operation is in progress you can cancel it by pressing the TIMER or SLEEP button You can select only consecutive days To return to step 1 and start timer programming all over again press the MENU CLEAR button at any point in this procedure 45 Using the Timers Continued Turning Timers On and Off Using the Sleep Timer Once a timer has be
7. may appear while the RT data is being received Tf the selected preset has no name it will be skipped and the next Program Service Name will be displayed Listening to DAB Digital Radio CR 545UKD H g a L g 3 g ON STANDBY O O z g 0 DISPLAY H N MENU CLEAR ENTER 000 OOOO OF 10 A z G TUNER iG T e e zs 2 lt p gt RANDOM BET ea IPod i Press the TUNER button repeatedly to select DAB Station name On the front panel press the INPUT button repeatedly to select DAB Selecting DAB for the Very First Time The very first time you select DAB the Auto Scan function automatically scans the DAB Band III for the multiplexes 1 e stations available in your area Once the scanning process is complete the first station that was detected is selected Using the Auto Scan Function Manually If a new DAB station is introduced or you move to a new area you can run the Auto Scan function again 1 Press the MENU CLEAR button 2 After appearing Auto Scan press ENTER 3 Use the lt lt gt buttons to select UK or All Band 3 see Auto Scan on page 36 and then press ENTER to start the Auto Scan function The number of stations found and the scanning progress are shown on the display 35 Listening to t
8. Automatic Clock Setting For the AccuClock function to work properly the CD receiver must be able to receive RDS radio stations which means an FM antenna must be connected Be sure to connect an FM antenna before plugging in the power cord see pages 13 and 14 The very first time you plug the power cord into a wall outlet the AccuClock function automatically searches for an RDS radio station that s broadcasting CT Clock Time information and sets the clock accordingly While the CT information is being received AccuClock appears dimly on the display as shown Note that it may take several minutes to set the clock If the clock is set successfully the day and time will be displayed brightly for 2 seconds as shown gt The AccuClock function automatically updates the clock daily at 2 00 3 00 and 14 00 If for some reason the clock cannot be set automatically see Setting the Clock on page 42 17 Basic Operations INPUT ON STANDBY STANDBY indicator PHONES Turning On the CD Receiver To turn on the CD receiver press the ON STANDBY button on the CD receiver or remote controller The STANDBY indicator goes off Press the ON STANDBY button again to set the CD receiver to Standby The STANDBY indicator lights up Adjusting the Volume Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it You can also use remote co
9. FM Tuning Frequency Range 87 50 MHz 108 00 MHz AM CR 545 only Tuning Frequency Range 522 kHz 1611 kHz DAB CR 545UKD only Tuning Frequency Range 174 928 MHz 239 200 MHz CD Frequency Response 20 Hz 20 kHz Audio Dynamic Range 80 dB THD Total Harmonic Distortion 0 05 Wow and Flutter Below threshold of measurability USB Frequency Response 20 Hz 20 kHz Audio Dynamic Range 80 dB THD Total Harmonic Distortion 0 05 Specifications and features are subject to change without notice 51 ONKYO CORPORATION Sales amp Product Planning Div 2 1 Nisshin cho Neyagawa shi OSAKA 572 8540 JAPAN Tel 072 831 8023 Fax 072 831 8163 ONKYO U S A CORPORATION 18 Park Way Upper Saddle River N J 07458 U S A Tel 800 229 1687 201 785 2600 Fax 201 785 2650 http Awww us onkyo com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6 82194 Groebenzell GERMANY Tel 49 8142 4401 0 Fax 49 8142 4401 555 http Awww eu onkyo com ONKYO EUROPE ELECTRONICS GmbH UK BRANCH The Coach House 81A High Street Marlow Buckinghamshire SL7 1AB UK Tel 44 0 1628 473 350 Fax 44 0 1628 401 700 ONKYO CHINA LIMITED Unit 1 amp 12 9 F Ever Gain Plaza Tower 1 88 Container Port Road Kwai Chung N T Hong Kong Tel 852 2429 3118 Fax 852 2428 9039 http Awww ch onkyo com W1004 1 o NA C Copyright 2010 ONKYO CORPORATION Japan All rights
10. 14 15 16 17 18 19 20 21 22 23 24 25 26 SLEEP button ON STANDBY button Number buttons Previous Next kaa gt buttons INPUT lt a gt buttons STOP button CD Play Pause HE button Fast Reverse Fast Forward lt a gt gt buttons USB Play Pause 18 button iPod Play Pause l button PLAYLIST FOLDER 4 v buttons ALBUM ny v buttons TIMER button CLOCK CALL button DISPLAY button MODE button MENU CLEAR button ENTER button FOLDER button VOLUME buttons TUNER button MUTING button REPEAT button SHUFFLE RANDOM button TONE button S BASS button Disc Notes Precautions for Playback Compact discs CDs with the following logo on the label surface can be used Do not use discs designed for purposes other than audio such as CD ROMs for PC use Abnormal noise could damage the speakers or amplifier COMPACT COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO RESICE ReWritable This CD receiver supports CD R and CD RW discs Note that some discs may not playback because of the disc characteristics scratches contamination or the recording state A disc recorded with an audio CD record will not playback unless it is finalized Never use discs which have a special shape such as hearts or octagons These types of discs could jam and damage the CD receiver CD Playback with Copy control Function Some audio CDs with copy contr
11. Connecting the DAB FM Antenna CR 545UKD 14 Connecting an Outdoor FM Antenna CR 545 14 Connecting Speakers c0 15 Connecting Other Components 16 Connecting a Subwoofer 16 Connecting Sound Reproduction Equipments 16 Connecting ATV ciemssintanessui 17 First Time Setup ccceeeeceeeeeeeees 17 AccuClock Automatic Clock Setting 17 Basic Operations Basic Operations 0 0 eeeeeeeeeeeeees 18 Turning On the CD Receiver 18 Adjusting the Volume ee 18 Selecting the Input Source a 18 Using Headphones seee 18 Muting the Sound ou eee 18 Adjusting the Bass Treble and Balance 19 Using the Super Bass Function 19 Disc Playback Using the CD receiver 20 Using the Remote Controller 21 Displaying CD Information 21 Selecting MP3 WMA Files 22 Displaying MP3 WMA Information 23 One Folder Playback ccecce 23 Random Playback cceee 24 Repeat Playback ceeeee 24 Memory Playback ceeees 24 Setting DISC Preferences 0 25 Installing the iPod iPhone Universal Dock Adapter Playing iPod iPhone oscene Using the iPod iPhone Menu only remote control Displaying Music File Information Setting for iPod iPhone eee USB Playback Playing Music Files on a USB
12. 1 I Cet ope ye 1 Memory playback can be set only when the input source is set to CD and playback is stopped 1 Press the MODE button repeatedly until the MEMORY Indicator appears MEMORY indicator 7 TRACK i ney dl fit i Bat Pnt Ei Playlist number Disc Playback Continued 2 Use the ka gt buttons to select the first track you want to add to the playlist then press ENTER MM TRACK ar x e err Track to be added to Total time of the playlist playlist Repeat this step to add additional tracks to the playlist You can also use the number buttons on the remote controller to select tracks To select MP3 WMA files for memory playback See page 22 for details on selecting MP3 WMA files To remove tracks from the playlist Press the MENU CLEAR button Each press removes the last track from the playlist Notes e Ifthe total playing time is more than 99 minutes and 59 seconds is displayed e You can add up to 25 tracks to the playlist If you try to add more the message Memory Full appears 3 To start memory playback press the 1 button 1M gt TRACK amp y fae bet da Track currently playing On the CD receiver press the Play Pause B E button to start memory playback Selecting Other Tracks During Memory Playback To select other playlist track
13. 1 Press the FOLDER button to display the current folder name 2 To select the previous folder press the ka a button To select the next folder press the PP button 3 Press the ENTER button Tips e Folders can be selected by number buttons as the folders of MP3 WMA DISCs see page 22 The previous next folders can be also selected by FOLDER v buttons Notes e Onkyo can not guarantee playback with all USB Flash Drives USB Flash Drive with security function are not supported Do not remove the USB Flash Drive from the CD receiver until Unplug OK appears on the display This may be the cause of the trouble of USB Flash Drives Onkyo accepts no responsibility whatsoever for the less or damage to data stored on a USB Flash Drive e Ifconnected USB Flash Drive via a USB hub playback is not available e Do not connect a personal computer or an external hard disc drive to the USB port e Ifthe USB Flash Drive contains a lot of data the CD receiver may take a while to read it 31 USB Playback Continued e Ifnon compliant file chosen Not Support appears on the display and playback the next compliant file e USB Flash Drive supports 65 280 files and 255 folders root involved The elapsed time may not appear accurately when using variable bitrates VBR format files Any copyrighted WMA files cannot be played Various Playbacks See page 23 to 24 for One Fold
14. 3 GROEBENZELL K MIYAGI GERMANY ONKYO EUROPE ELECTRONICS GmbH Features Amplifier Digital Amplifier 1 Audio Input Subwoofer Pre Out CD Player Plays CDs MP3 WMA CD Rs and CD RWs 25 Track Programming 3 Repeat Modes Track Full 1 Folder 4 Play Modes Normal Random Memory 1 Folder iPod iPhone Made for iPod touch 1st and 2nd generation iPod classic and iPod nano 2nd 3rd 4th and 5th generation Made for iPhone 3GS iPhone 3G and iPhone Digital Connection USB Interface MP3 WMA compatible 25 Track Programming 3 Repeat Modes Track Full 1 Folder 4 Play Modes Normal Random Memory 1 Folder Tuner amp Other 40 FM AM Presets CR 545 30 FM 30 DAB Presets CR 545UKD 4 Program Timer Play Once or Every Sleep Timer Battery Free Memory Backup Headphone Jack Aluminum Front Panel Speaker Binding Post l Bing e Supplied Accessories Make sure you have the following accessories AM loop antenna CR 545 Note In catalogs and on packaging the letter at the end of the product name indicates the color Specifications and operations are the same regardless of color Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries 2 Make sure to use discs that have been finalized 3 iPhone iPod iPod classic iPod nano and
15. 7 ary n m OROROORO LUI 8 9 10 11 12 13 1 INPUT button 9 USB port 2 ON STANDBY button 10 Disc tray 3 STANDBY indicator 11 Previous Next ka a gt gt buttons 4 Remote control sensor or PRESET lt a gt buttons 5 Display 12 Stop W button 6 VOLUME control knob 13 Play Pause H button 7 TONE BALANCE button knob 14 Open Close button 8 PHONES jack Rear Panel 6 7 DAB FM 8 1 LINE IN 5 SUBWOOFER PRE OUT 2 VIDEO OUT 6 Power cord 3 AMANTENNA CR 545 7 FMANTENNA CR 545 4 SPEAKERS 8 DAB FM ANTENNA CR 545UKD Getting to Know the CD Receiver Continued Display 1 Input source indicator DAB is only for CR 545UKD 2 File format indicators MP3 WMA 3 S BASS indicator 4 FOLD indicator 5 Playback mode indicators 1FOLD MEM RDM G REPEAT G1 REPEAT 1 6 Tuning indicators AUTO gt e lt FM ST RDS 11 10 11 12 13 14 15 16 12 13 14 15 iPod menu mode indicator J MUTING indicator TITLE ARTIST and ALBUM indicators Message area FILE indicator TRACK indicator Play gt and pause I indicators TIMER indicators 1234 DISC TOTAL indicators SLEEP indicator Getting to Know the CD Receiver Continued Remote Controller INPUT 5 o_o iC Cr REPEAT SHUFFLE CH RANDOM 10 HV to 13 14 15 16 17 18 19 20 21 22 23 24 25 26 ON OOA ON 10 11 12 13
16. Connect a USB Flash Drive as shown below USB Port 1 Insert USB Flash Drive OR a ee gk 5 2 Use the INPUT lt a gt buttons to select USB e When no USB Flash Drive is connected USB No Media will be displayed e When there is no MP3 or WMA file in the USB Flash Drive No Files will be displayed 3 To start playback press the H button Playback will begin with the top file in the folder organization see page 30 File 1 To stop playback Press the W button To pause playback Press the B E button The Pause HI indicator appears To resume playback press the B E button again 4 Before removing the USB Flash Drive press the m button during playback then press the m button again Unplug OK will be displayed Display during Stop ogee Volume label or USB vse FOLD bid dh l Total number of folders Total number of files Number buttons MENU CLEAR D Be cite s l ENTER FOLDER meo g oOo S2 DAO ilgs 5 ONKYO Selecting Music Files To return to the beginning of the music file currently playing press the kdd button Press the k lt button repeatedly to select previous file e While playback is stopped pressing the kaa button will select the previous file Press the gt button repeatedly to select next file Selecting Folders
17. ENTER Alphabet Sort stations alphabetically default Favorite Sort stations by favorites The stations you select the most will appear at the top of the list Active Sort by active stations Receivable stations appear at the top of the list Stations that cannot be received properly appear at the bottom of the list Multiplex Sort stations by multiplex Trim List Delete all of the stations that cannot be received properly from the list DRC Setting With the DRC Dynamic Range Control setting you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume levels ideal for listening to the radio late at night when you don t want to disturb anyone Use the lt lt gt buttons to select the following options and then press ENTER DRC 0 DRC off default DRC 1 Large reduction in dynamic range DRC 1 2 Small reduction in dynamic range Presetting FM Stations Automatically Auto Preset With the Auto Preset function you can automatically preset the FM radio stations available in your area in one go Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations The Auto Preset function does not preset AM and DAB radio stations Auto Preset Caution Any existing presets will be deleted when the Auto Preset function is run 0 Oz CxO
18. be installed prior to inserting an iPod e To prevent damage to the dock connector do not twist or force your iPod into the dock and be careful not to wiggle your iPod while inserting it e Do not use with any iPod accessories such as FM transmitters and microphones as they may cause a malfunction Ifyou use a case with your iPod always remove it before you insert it Otherwise it will not connect properly and a malfunction may occur 2 Use the INPUT a gt buttons to select iPod When no iPod is connected iPod No Device will be displayed 27 iPod iPhone Playback Continued ea gt gt buttons Press to select the previous or next track Press to select the item on the menu a gt O OO Q H Hi OOO OO lt MENU CLEAR button l Press to operate menu ENTER button 2 gt Press to select menu VOLUME buttons A JV LS Adjust the volume level Repeat button REPEAT Press to set the repeat function lt lt gt buttons ee e l During playback fast forwards me e SHUFFLE RANDOM button or fast reverses the track l Press to set the shuffle function ALBUM buttons NM F Press to select an album on the iPod PLAYLIST buttons N M Press to select a playlist on the iPod Using the iPod iPhone menu only remote control 1 Press the MENU CLEAR button to display i
19. iPod touch are trademarks of Apple Inc registered in the U S and other countries Made for iPod and Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respecively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Before Using the CD Receiver Installing the Batteries Open the battery compartment as shown Insert two batteries R6 AA into the battery compartment Carefully follow the polarity diagram positive and negative symbols inside the battery compartment After the batteries are installed and seated correctly attach the compartment cover Notes If the remote controller doesn t work reliably try replacing the batteries Don t mix new and old batteries or different types of batteries If you intend not to use the remote controller for a long time remove the batteries to prevent damage from leakage or corrosion Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion Using the Remote Controller When you operate the remote controller point it at the CD receiver s remote control sensor Remote control sensor Notes The remote controller may not work reliably if the CD receiver is subjected to bright
20. moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped MEY A ee PORTABLE CART WARNING 83125A 15 16 17 18 Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged B If liquid has been spilled or objects have fallen into the apparatus C Ifthe apparatus has been exposed to rain or water D Ifthe apparatus does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation E If the apparatus has been dropped or damaged in any way and F When the apparatus exhibits a distinct change in performance this indicates a need for service Object and Liquid Entry Never push ob
21. the frequency of the radio e Use the remote controller s lt 4 gt buttons to change the frequency of the radio RDS doesn t work e The FM station you are tuned to doesn t support RDS e Install an outdoor FM antenna see page 14 e Change the location and position of your outdoor FM antenna e Move the FM antenna as far away as possible from fluorescent lights iPod iPhone Cannot Use HP appears on the display e When you select iPod as the input source the headphones output no sound Remove the headphones and use the speaker If use headphones connect it directly to iPod No sound e Make sure that your iPod is compatible with the system see page 5 e Make sure that the iPod is securely inserted in the dock Remove your iPod from its case before inserting it e Confirm that the CD receiver s INPUT is set to iPod and that the iPod is set to PLAY iPod does not respond to the CD receiver buttons or enclosed remote control e Confirm that the CD receiver s INPUT is set to iPod e Make sure that the iPod is securely inserted in the dock Remove your iPod from its case before inserting it e Ifthe iPod is sleeping wait for the iPod to wake up and start e If iPod No Device is displayed remove your iPod once wait a few moments and then connect it again e Some functions may not be available depending on the iPod model software version or contents being played Update the iPod
22. z 3 FA E Q Cc MENU CLEAR Oc l ENTER PUT TUNER MUJING Caa a TUNER O FLE 1 Press the TUNER or INPUT lt a gt buttons repeatedly until FM appears Make sure the FM antenna is positioned to achieve the best possible reception INPUT lt gt 2 Press the MENU CLEAR button and then use the ka gt gt buttons to select Auto Preset 3 Press ENTER The confirmation message Auto Preset appears To cancel the Auto Preset function at this point press the MENU CLEAR button 4 To start the Auto Preset function press ENTER Note Depending on your location a preset may be stored with no station and you will hear only noise when you select it In this case delete the preset see page 41 37 Listening to the Radio Continued Presetting FM AM Stations Manually 4 Use the ka a gt gt buttons to With the Preset Write function you can manually select a preset preset individual FM and AM radio stations Presets make it easy to select your favorite stations and FR amp eliminate the need to tune the radio manually each time you want to change stations 5 To store the station press ENTER FM stations can also be preset automatically see if necetatien hae er been Sore tothe page 37 y selected preset Complete appears and the station is stored If a station has already been stored in the selected p
23. 4 To store the station press MODE button 5 Repeat steps 1 to 4 to preset more 1 Tune into the station that you want to DAB Stations store as a preset 2 Press the MENU CLEAR button and then use the ka gt buttons to select PresetWrite 3 Press ENTER The preset number flashes To cancel the Preset write function at this point press the MENU CLEAR button 38 Listening to the Radio Continued Naming Presets FM AM only Selecting Preset Stations You must store some presets before you can select them see pages 37 and 38 INPUT lt gt os ONISTANDBY SLEEP TIMER CLOCK CALL Number buttons TUNER Use the TUNER or INPUT lt a gt gt buttons to select FM or AM CR 545 The preset you selected the last time will still be selected Use the ke gt buttons to select a preset Press the kdd button to select the previous preset Press the B button to select the next preset You can also use the number buttons to select presets To select Press Folder 8 Folder 10 Folder 34 OOO used to enter numbers over 10 You can also use the front panel controls 1 2 Use the INPUT button to select FM or AM CR 545 Use the PRESET lt a gt buttons to select a preset You can name presets for easy identification The preset name may contain of up to twelve characters
24. Flash Drive 31 Random Playback eee 32 Repeat Playback sicirworsnarininis 32 Displaying Music File Information 33 Listening to the Radio Tuning into FM AM Radio Stations 34 Displaying FM AM Radio Information 35 Receiving RDS siicewseaiecianncaus 35 Listening to DAB Digital Radio CR 545UKD 35 Selecting DAB Stations CR 545UKD 36 DAB Setup CR 545UKD 0 ee 36 Presetting FM Stations Automatically Auto Preset 37 Presetting FM AM Stations Manually 38 Presetting DAB Stations Manually CR 545UKD 38 Selecting Preset Stations 0 0 39 Naming Presets FM AM only 39 Copying Presets FM AM only 40 Erasing a Preset s Name FM AM only 41 Erasing Presets FM AM only 41 Adjusting the Display s Brightness 41 Clock and Timer Setting the Clock oo eects 42 AccuClock with a Specific Station 42 Using the Timers ooo eeeeeeeeeeeeeeeeeee 44 Programming the Timers 44 Turning Timers On and Off 46 Checking Timer Settings 46 Using the Sleep Timer eee 46 Troubleshooting cccceeeeeeeereeees How to reset to factory default Specifications c ceceeeeeeseeeeeeeeees Miscellaneous 47 47 51 Getting to Know the CD Receiver Front Panel 1 2 33 4 5 6 14
25. ISPLAY button repeatedly to display the following CD information gt The elapsed track time is displayed The remaining track time is being I displayed with The remaining disc time is being Note 4i displayed with and TOTAL indicator See page 23 for details on displaying MP3 WMA information 21 Disc Playback Continued Selecting Playing MP3 WMA Files On an MP3 WMA DISC MP3 WMA files may be organized hierarchically with folders containing files and subfolders as shown below On the CD receiver all folders appear at the same level making it easy to select folders regardless of the hierarchy Root Folder 1 File 1 File 10 Folder 2 Folder 3 Folder 4 File 11 File 14 File 12 File 13 File 18 a N YY If you don t select a specific MP3 WMA file or folder for playback all of the MP3 WMA files on the CD will be played in numerical order starting with file 1 Selecting MP3 WMA Files ON STANDBY SLEEP TIMER CLOCKCALL OO Number buttons Ps i FOLDER O OIO CRUI ever I L SHUFFLE RANDOM The all folders in MP3 WMA files appear at the same revel If random playback is currently selected press the SHUFFLE RANDOM button to cancel i
26. N Signal flow r J Powered subwoofer LINE INPUT Connecting Sound Reproduction Equipments The following diagram shows how to connect sound reproduction equipments Connect the CD receiver s LINE IN jacks to the cassette deck s or MD recorder s etc OUTPUT PLAY jacks CD receiver ed Analog audio cables RCA Onkyo cassette deck s rear panel 16 H b G j Q OUTPUT White whe lp i Red f T R A Signal flow Connecting Other Components Continued Connecting a TV The CD receiver has a VIDEO OUT jack which outputs video signal When you see the contents of videos and photos in your iPod on TV connect the cable as follows CD receiver TV VIDEO INPUT c Signal flow Notes e Before connecting the power cord connect all of your speakers and AV components e Turning on the CD receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit If this is a problem plug the CD receiver into a different branch circuit Plug the power cord into a suitable wall outlet The STANDBY indicator lights up CD receiver LILI Ww E M J Ly E To wall outlet X Power cord The figure varies from country to country First Time Setup AccuClock
27. ONKYO CD Receiver CR 545 CR 545UKD Instruction Manual Thank you for purchasing an Onkyo CD receiver Please read this manual thoroughly before making any connections and plugging it in Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD receiver Please retain this manual for future reference COMPACT Made for iPod Q iPhone DIGITAL AUDIO Contents Getting Started ceceesseeeeeeees 2 GOMMeCtIONS seccessetereceeesssereeseseesneee 13 Basic Operations Disc Playback sssoesnssnersannnn 20 iPod iPhone Playback 00 27 USB Playback Listening to the Radio 008 34 Glock and TimMer jiecsseescscessee sees 42 Miscellaneous Troubleshooting WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE CAUTION AN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO AN QUALIFIED SERVICE PERSONNEL WARNING AVIS FISK OF ELECTRIC SHOCK fll RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk o
28. Pod menu on iPod Adot indicator iPod menu mode indicator appears on the CD receiver s display To go to the upper iPod menu press the MENU CLEAR button iPod menu mode indicator 2 Press the K lt d gt gt button and move the iPod menu item highlight 3 Press the ENTER button to select the item Notes e iPod menu items can be moved only when the indicator is lit In this state kaa gt buttons can not be used for skipping tracks This state can be canceled forcibly by the E button e When operating iPod menu via the CD receiver do not operate iPod directly This may be the cause of the trouble of CD receiver s operation e The volume level is adjusted by using the VOLUME A knob or the buttons on the remote controller Adjusting the volume on your iPod has no effect Displaying Music File Information You can display various information about the music files currently playing 28 amp I1 button Press to play pause playback ON STANDBY SLEEP TIMER CLOCK CALL DISPLAY During playback press the DISPLAY button repeatedly to display the following music file information Title name Title of the current file TE Artist name 4 Name of the artist ARTIST Album name Name of the album 4 Elapsed time The length of time that the current music file has been playing
29. When timed playback finishes the CD receiver automatically switches to Standby mode e Ifthe STANDBY indicator is flashing the built in amplifier protection circuit has been activated This can happen if there s a short between the positive and negative wires of a speaker cable Audio There s no sound e Make sure the CD receiver s volume control is not set to minimum see page 18 e Make sure the correct input source is selected see page 18 e Make sure the CD receiver is not muted see page 18 e Make sure the speakers are connected correctly see page 15 e Check all connections and correct as necessary see pages 13 to 17 e While headphones are connected the speakers output no sound see page 18 The sound quality is not good e Make sure the speaker cables are connected with the correct polarity see page 15 e Make sure all audio connecting plugs are pushed in all the way see page 16 to 17 e The sound quality can be affected by strong magnetic fields such as that from a TV Try moving any such devices away from the CD receiver e Ifyou have any devices that emit high intensity radio waves near the CD receiver such as a cellular phone that s being used to make a call the CD receiver may output noise e The CD receiver s precision drive mechanism may emit a faint hissing sound while reading discs during playback or when searching for tracks You may be able to hear this noise in extremely quiet environm
30. ck of WMA Discs WMA stands for Windows Media Audio an audio compression technology developed by Microsoft Corporation USA Only WMA files with the extension WMA or wma are supported e Encode the WMA file with an application approved by Microsoft Corporation USA The file may not playback correct if encoded with an unapproved application e Variable bitrates VBR between 64kbps and 160kbps 32 44 1 48kHz are supported The time information during VBR playback may not display correctly e Copyright protected WMA files cannot be played back e WMA Pro Lossless and Voice are not supported Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and or in other countries Handling Discs Hold discs by the edge or by the center hold and edge Avoid touching the playback surface surface with nothing printed on it Label surface printed surface NA Playback surface Do not attach paper or stickers or write on the playback or label surface of the disc Take care not to scratch or damage the disc 11 Disc Notes Continued Precautions for Rental Discs Do not use discs with residue from cellophane tape rental discs with labels which are peeling off or discs with decorative labels This type of disc could get stuck in the CD receiver or could damage the CD receiver Precautions for Inkjet Printable Discs Do not leave a CD R CR RW having a lab
31. e case This unit s top and rear panels may get warm after prolonged use This is normal e Ifyou do not use this unit for a long time it may not work properly the next time you turn it on so be sure to use it occasionally e When you ve finished using this unit remove 10 all discs and turn off the power Installing this Unit e Install this unit in a well ventilated location e Ensure that there s adequate ventilation all around this unit especially if it s installed in an audio rack If the ventilation is inadequate the unit may overheat leading to malfunction e Do not expose this unit to direct sunlight or heat sources because its internal temperature may rise shortening the life of the optical pickup e Avoid damp and dusty places and places subject to vibrations from loudspeakers Never put the unit on top of or directly above a loudspeaker e Install this unit horizontally Never use it on its side or on a sloping surface because it may cause a malfunction e Ifyou install this unit near a TV radio or VCR the picture and sound quality may be affected If this occurs move this unit away from the TV radio or VCR Moisture Condensation Moisture condensation may damage this unit Read the following carefully Moisture may condense on the lens of the optical pickup one of the most important parts inside this unit e Moisture condensation can occur in the following situations The
32. e the kaa gt buttons to select the destination preset The number of the destination preset flashes 5 To copy the preset press ENTER If no station has yet been stored in the destination preset the station is copied and Complete appears If a station has already been stored in the destination preset the message Overwrite appears To overwrite the previously stored station press ENTER To not overwrite the previously stored station press the MENU CLEAR button Tip If you favorite station is stored in preset 5 and you want to make it preset 1 copy preset 5 to preset 1 To keep the station that s already stored in preset 1 you may want to copy it to an unused preset first Listening to the Radio Continued Erasing a Preset s Name FM AM only Adjusting the Display s Brightness With the following operation all the preset s names are erased E H 4 H t i O QO FA iS IS IS a O0 0O MODE Z i MENU CLEAR 03 QOO OOO 0 p g VOLUME gt TUNER MU 10 Select the preset name you want to erase see page 39 Press the MENU CLEAR button and then use the ka gt gt buttons to select NameErase To erase the preset s name press the ENTER button The preset s name is erased and Complete appears on the display Era
33. edly to select subsequent tracks On MP3 WMA DISC you can select TANDBY SLEEP TIMER CLOCK CALL O OO To select Press Track 8 Track 10 Track 34 OOO used to enter numbers over 10 With MP3 WMA DISC you can select files in the current folder with these buttons Press to display more CD Press to stop playback _information Press to fast reverse or fast forward During playback or while playback is paused press and hold the fast forward B gt button to fast forward back X or the fast reverse lt lt button to fast Press the VOLUME Up 4 button to increase volume Press the VOLUME Down A button to decrease volume cp REPEAT Moeaa poses SHUFFLE INPUT___ TUNER MUTING Press to adjust the volume Press to Play Pause playback Pressing this button while the CD 1 TPLAYLIST ALBUM Z Press to select folders On MP3 WMA DISC press the v button to select the next folder and press the button to select the previous folder J FOLDER spass receiver is on Standby will turn on the QO CD receiver and start playback ONKYO To resume playback press this button Use the number buttons as shown in the examples below to select tracks S Displaying CD Information During playback or while playback is paused press the remote controller s D
34. el printed with an inkjet printer in the CD receiver for a long time The disc could get stuck in the CD receiver or could damage the CD receiver Remove the disc from the CD receiver when not being played and store it in a case A freshly printed disc will stick easily and should not be played immediately Caring for Discs If the disc is dirty the CD receiver will have a hard time reading signals and the audio quality may drop If the disc is dirty gently wipe off fingerprints and dust with a soft cloth Lightly wipe from the center outwards To remove stubborn dust or dirt wipe the disc with a soft cloth dampened with water and then dry it with a dry cloth Do not use cleaning spray for analog records or antistatic agents etc Never use volatile chemicals such as benzine or paint thinner as they can impregnate the disc surface O 12 Connecting Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna and how to connect commercially available outdoor FM antenna The CD receiver won t pick up any radio signals without an antenna connected so you must connect the antenna to use the tuner AM antenna jack CR 545 A FM antenna jack CR 545 CD receiver ot y 4 a a e E m i DAB FM antenna jack L CR 545UKD Connecting the Indoor FM Antenna CR 545 The supplied indoor FM antenna is for indoor use only 1 Attach t
35. en programmed you can turn it With the sleep timer you can set the CD receiver so on or off as necessary For example while you re on that it automatically turns off after a specified period holiday you may want to turn off the timer you use as an early morning alarm SLEEP ON STANOBY SLEEP TIMER CLOCK CALL i Zl i H 6 IS S ra 0 OOO 0 z FA a 3 3 OO 0 0 0 MENU CLEAR me Press the SLEEP button repeatedly to select the required sleep time With the SLEEP button you can set the sleep time from 90 to 10 minutes in 10 minute decrements 1 Press the TIMER button repeatedly Use the lt 4 P gt buttons to set the to select timer 1 2 3 or 4 sleep time in 1 minute increments from 99 2 Use the Kd gt gt buttons to to 1 a select Timer On or Timer Off RER tae The timer numbers which set Timer On E n light up After a few moments the previous at z i display reappears When the sleep timer has been set the SLEEP indicator appears on the display as Checking Timer Settings shown The sleep time appears on the display for about 8 seconds then the 1 Press the TIMER button repeatedly previous display reappears to select timer 1 2 3 or 4 and then press ENTER Checking the Remaining Sleep Time 2 Press ENTER repeatedly to see all To check the remaining sleep time press the of the timer s s
36. ents Audio output is intermittent when the CD receiver is subjected to vibration e The CD receiver is not a portable device Use it in a location that s not subject to shock or vibration Headphone output is intermittent or there s no sound This may be due to dirty contacts Clean the headphones plug See your headphones instruction manual for cleaning information Also make sure that the headphones cable is not broken or damaged e When you select iPod as the input source the headphones output no sound Audio performance e Audio performance will be at its best about 10 to 30 minutes after the CD receiver has been turned on and had time to warm up e Using cable ties to bundle audio cables with speaker or power cables may degrade the sound quality so don t do it 47 Troubleshooting Continued CD Playback Playback jumps e The CD receiver is being subjected to vibration or the disc is scratched or dirty see page 11 to 12 Can t add tracks to the playlist for memory playback e Make sure there s a disc in the CD receiver Also you can only add valid track numbers For example if the CD contains 11 tracks you cannot add track 12 The disc will not play e Make sure the disc has been loaded correctly with the label side facing up e Check to see if the surface of the disc is dirty see page 11 to 12 e If condensation is suspected unplug the power cord and leave CD receiv
37. er Playback and Memory Playback Random Playback With random playback all of the music files on the USB Flash Drive are played in random order SHUFFLE RANDOM il 1 Press the SHUFFLE RANDOM button The RANDOM RDM indicator appears 2 To start random playback press the gt 1 button Cancelling Random Playback e To cancel random playback press the SHUFFLE RANDOM button The RANDOM indicator disappears e Random playback is cancelled when the USB Flash Drive is removed 32 Repeat Playback When playing back USB Flash Drive music files all files on the USB Flash Drive will be played according to repeat playback the REPEAT indicator is already light up The type of Repeat playback can be selected INPUT co REPEAT O USB Pod REPEAT SHUFFLE RANDOM PAEST anun oO ONKYO a Press the REPEAT button repeatedly to select the type of repeat playback e Repeat playback REPEAT G indicator appears M e Repeat 1 playback Repeats a current file REPEAT 1 G 1 indicator appears M The repeat function off USB Playback Continued Displaying Music File Information You can display various information about the MP3 WMA files currently playing including tags such as title artist name and album name TIMER CLOCK CALL DISPLAY During playback press the DISPLAY button repeatedly to displa
38. er for two to three hours in the room temperature before playing any discs Some CD R RW discs may not be playable see page 11 It takes a long time for playback to start e It may take the CD receiver a while to read CDs that contain many tracks or files Can t play MP3 WMA DISCs e Use only ISO 9660 Level 1 or Level 2 format discs see page 11 The disc has not been finalized Finalize the disc e Check whether the file format is supported see page 11 e MP3 WMA files without a MP3 WMA or mp3 wma filename extension are not recognized USB Flash Drive Playback Can t access the music files on a USB Flash Drive The CD receiver s USB port supports only USB Flash Drives Do not connect a USB connection MP3 player or HDD etc Personal computers and iPod models etc cannot be connected e If No Media or Reading remains displayed on the CD receiver eject the USB Flash Drive once wait a few seconds and then insert it again e Check that the format is FAT16 or FAT32 and the cluster size is 32K bytes or less e USB Flash Drives with an internal USB hub are not supported Can t play MP3 WMA files e Check whether the file format is supported see page 30 e MP3 WMA files without a MP3 WMA or mp3 wma filename extension are not recognized e The MP3 WMA file s copyright option is on Don t use the copyright option Tuner Reception is
39. ettings SLEEP button Note that if you press the SLEEP button while the Notes sleep time is being displayed you ll shorten the sleep e You can change the settings by using time by 10 minutes the kaa gt buttons e Ifyou change the settings of a timer that is off that timer will be turned on Cancelling the Sleep Timer After confirming all the settings the To cancel the sleep timer press the SLEEP button previous display reappears repeatedly until Sleep Off appears then the SLEEP To return to the previous display at any indicator disappears point in this procedure press the MENU CLEAR button 46 Troubleshooting If you have any trouble using the CD receiver look for a solution in this section How to reset to factory default Before unplug the power supply cord set the CD receiver in the STANDBY state While holding down the ON STANDBY button on the main unit plug the power supply cord RESET appears on the display then the CD receiver is in the STANDBY state Power Can t turn on the CD receiver e Make sure that the power cord is properly plugged into the wall outlet see page 17 e Unplug the power cord from the wall outlet wait 5 seconds or more then plug it in again The CD receiver turns off unexpectedly e Ifthe sleep timer has been set and the TIMER indicator is shown on the display the CD receiver will turn off automatically after a specified period e
40. f electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when
41. fault 1 Dim 2 Dimmer 29 USB Playback The CD receiver can playback MP3 WMA files that have been stored on USB Flash Drives Supported USB Flash Drive and files e FAT16 and FAT32 formats 32K bytes or less cluster size e MPEG 1 Audio LAYER 3 files and files with sampling rate 32 44 1 and 48kHz e Variable bitrates VBR for MP3 files are from 32 to 320 kbps and they must have a MP3 or mp3 filename extension e Variable bitrates VBR for WMA files are from 64 to 192 kbps and they must have a WMA or wma filename extension Note MPEG 2 Audio LAYER 3 MPEG 2 5 Audio LAYER 3 MP1 and MP2 files are not supported 30 USB Flash Drive Folders and Files On the USB Flash Drive MP3 or WMA files may be organized in a hierarchically with folders containing files and subfolders as shown below All folders appear at the same level regardless of the hierarchy Root Folder 1 File 1 File 10 Folder 2 Folder 3 Folder 4 File 11 File 14 File 12 File 13 File 18 amNY If you don t select a specific music file or folder for playback all of the music files on the USB Flash Drive will be played in numerical order starting with file 1 USB Playback Continued Playing Music Files on a USB Flash Drive This section explains how to play music files on a USB Flash Drive
42. he FM antenna as shown Insert the plug colored side fully into the jack 2 Use thumbtacks or something similar to fix the FM antenna into position Caution Be careful that you don t injure yourself when using thumbtacks If you cannot achieve good reception with the supplied indoor FM antenna try a commercially available outdoor FM antenna instead see page 14 Connecting the AM Loop Antenna CR 545 The supplied indoor AM loop antenna is for indoor use only 1 Assemble the AM loop antenna inserting the tabs into the base as shown 3 ok gt O 2 Connect the terminal of the AM loop antenna to the AM antenna jack as shown ANTENNA AM gt 13 Connecting Antennas Continued Connecting the DAB FM Antenna 2 Use thumbtacks or something CR 545UKD similar to fix the DAB FM antenna The supplied indoor DAB FM antenna is for indoor into position use only E Attach the DAB FM antenna as t shown ANTENNA Thumbtacks etc VA Be careful that you don t injure yourself when using thumbtacks Caution Connecting an Outdoor FM Antenna CR 545 If you cannot achieve good reception with the supplied indoor FM antenna try a commercially available outdoor FM antenna instead 6 FM 75Q Notes 14 Outdoor FM antennas work best outside but usable results can sometimes be obtained when installed in an attic or loft Fo
43. he Radio Continued Selecting DAB Stations CR 545UKD 1 Use the lt gt buttons to select the DAB stations If a secondary service is available a right angle bracket gt is displayed Press the B button to listen to the secondary service O48 While the secondary service is selected a left angle bracket lt is displayed Press the lt lt button to return to the primary service oD When you select a station that you ve selected a lot in the past the letter F short for Favorite is displayed 2 Press ENTER The station is tuned If you select a station that cannot be received properly NotAvailable is displayed om Displaying DAB Radio Information Press the remote controller s DISPLAY button repeatedly to display more information about the selected DAB station 1 DLS Dynamic Label Segment When tuned to a station that s broadcasting DLS text data the text will scroll across the display lt _ Scroll 2 Program Type Displays the type of program DAB 36 3 Multiplex Name Displays the name of the current multiplex DAB Channel and Frequency Displays the channel and frequency of the current multiplex Bit Rate and Audio Mode Displays the station s bit rate and audio mode stereo or mono 248
44. imer has priority Timer 2 07 00 12 30 If two or more timers overlap the timer with the earliest start time has priority For example Timer 1 9 00 10 00 Timer 2 8 00 10 00 This timer has priority If the On and Off times of two timers are the same the timer with the earliest start time has priority and the other timer will fail For example Timer 1 0 00 1 00 This timer has priority Timer 2 1 00 2 00 44 Time Indicators When a timer has been set the TIMER 6 2 indicator and the number of the timer appear on the display Notes The timers work only if the CD receiver is on Standby If it s on when a timer is supposed to start playback nothing will happen e While timed playback is in progress the timer s Off time cannot be changed Programming the Timers Notes e You must set the clock before you can program the timers e Before programming a timer to turn on the radio you must preset the station you want to use See pages 37 and 38 Ifyou don t operate any buttons for 60 seconds while programming a timer the procedure will be cancelled and the previous display will reappear R ON STANDBY SLEEP T MER CLOCK CALL i OQO Number buttons leans TIMER ENTER kea Pi 1 Press the TIMER button repeatedly to select timer 1 2 3 or 4 and then press ENTER If Clock appears you need to set the clock see pages 17 42 and 43 2 U
45. ing CT information Try another station if necessary 43 Using the Timers The CD receiver has four programmable timers for automated playback and a sleep timer for turning the CD receiver off after a specified period The timers can be used to start all the playback at a specified time You could for example use a timer to turn on the CD receiver every morning just like a radio alarm clock About the Timers The various settings for the four programmable timers are explained here For details on the sleep timer see page 46 Repeat Timers Each timer can be programmed to work just once Once every week Every every day Everyday or on a range of days Days Set Once The timer will work just once Every The timer will work every week on the specified day and time e Everyday The timer will work every day Days Set The timer will work on the specified range of days With this setting you could set up a morning alarm from Monday to Friday Timer Example To wake up to your favorite radio station preset 1 every morning you could program a timer as follows FM gt 1 gt Every gt Everyday gt On 7 00Off 7 30 gt Timer Vol 15 If you want a radio alarm only on weekdays select Days Set instead of Every Day and specify MON FRI Timer Priority If two or more timers are set to the same On time the lowest numbered timer has priority For example Timer 1 07 00 13 00 This t
46. inue until all of the MP3 WMA files in that folder have been played Random Playback With random playback all of the tracks on the disc are played in random order Random playback can be set only when playback is stopped e H i 8 H 3 OO 0 0 i OOOO OCO OOOO O A gi Y 8 0 0 i SHUFFLE RANDOM 1 Press the SHUFFLE RANDOM button repeatedly until the RANDOM RDM indicator appears 2 To start random playback press the gt 1 button Cancelling Random Playback e To cancel random playback press the SHUFFLE RANDOM button repeatedly until the RANDOM indicator disappears e Random playback is cancelled when you press the 4 button to open the disc tray 24 Repeat Playback With repeat playback you can play an entire CD repeatedly or play one track repeatedly Q2 o6 reer OCO SHUFFLE USB Pod RANDOM TONE Press the REPEAT button repeatedly until the REPEAT G or REPEAT 1 1 indicator appears Cancelling Repeat Playback To cancel repeat playback press the REPEAT button repeatedly until both the REPEAT and REPEAT 1 indicators disappear e Repeat playback is cancelled when you press the 4 button to open the disc tray Memory Playback With memory playback you can create a playlist of up to 25 tracks Number buttons MENU CLEAR MENU CLEAR ENTER ENTER I
47. jects of any kind into the apparatus through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Don t put candles or other burning objects on top of this unit Batteries Always consider the environmental issues and follow local regulations when disposing of batteries If you install the apparatus in a built in installation such as a bookcase or rack ensure that there is adequate ventilation Leave 20 cm 8 of free space at the top and sides and 10 cm 4 at the rear The rear edge of the shelf or board above the apparatus shall be set 10 cm 4 away from the rear panel or wall creating a flue like gap for warm air to escape Precautions 1 Recording Copyright Unless it s for personal use only recording copyrighted material is illegal without the permission of the copyright holder AC Fuse The AC fuse inside the unit is not userserviceable If you cannot turn on the unit contact your Onkyo dealer Care Occasionally you should dust the unit all over with a soft cloth For stubborn stains use a soft cloth dampened with a weak solution of mild detergent and water Dry the unit immediately afterwards with a clean cloth Don t use abrasive cloths thinners alcohol or other chemical so
48. light such as direct sunlight or inverter type fluorescent lights Keep this in mind when installing e If another remote controller of the same type is used in the same room or the CD receiver is installed close to equipment that uses infrared rays the remote controller may not work reliably Don t put anything such as a book on the remote controller because the buttons may be pressed inadvertently thereby draining the batteries The remote controller may not work reliably if the CD receiver is installed in a rack behind colored glass doors Keep this in mind when installing The remote controller will not work if there s an obstacle between it and the CD receiver s remote control sensor Contents Getting Started iPod iPhone Playback Important Safety Instructions 2 PRECAUTIONS 2 c ecreceesperecceneeeesnensdteeneess 3 FEAtUTES aiora soi 5 Supplied Accessories eeceee 5 Before Using the CD Receiver 6 Installing the Batteries 0 4 6 Using the Remote Controller 6 Getting to Know the CD Receiver 8 Front Panel 2ccacccctess2 cececancertescipetecserse 8 Rear Panel sissien 8 Display 225 cessbnsseccneivcttentecssa teas s esteezss 9 Remote Controller 0 0 10 Dise Notes siirsin ees 11 Connections Connecting Antennas 13 Connecting the Indoor FM Antenna CR 545 13 Connecting the AM Loop Antenna CR 545 13
49. lvents because they may damage the finish or remove the panel lettering Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY AC outlet voltages vary from country to country Make sure that the voltage in your area meets the voltage requirements printed on the unit s rear panel e g AC 230 V 50 Hz or AC 120 V 60 Hz The power cord plug is used to disconnect this unit from the AC power source Make sure that the plug is readily operable easily accessible at all times Pressing the ON STANDBY button to select Standby mode does not fully shutdown the unit If you do not intend to use the unit for an extended period remove the power cord from the AC outlet Never Touch this Unit with Wet Hands Never handle this unit or its power cord while your hands are wet or damp If water or any other liquid gets inside this unit have it checked by your Onkyo dealer Preventing Hearing Loss Caution Excessive sound pressure from earphones and headphones can cause hearing loss Batteries and Heat Exposure Warning Batteries battery pack or batteries installed shall not be exposed to excessive heat as sunshine fire or the like Handling Notes e Ifyou need to transport this unit use the original packaging to pack it how it was when you originally bought it Do not leave rubber or plastic items on this unit for a long time because they may leave marks on th
50. ly Note that when the clock is set manually it will not be updated automatically 1 Press the TIMER button repeatedly until Clock appears 2 Press the ENTER button then appears AccuClock 3 Use the k gt buttons to select Manual Adjust 4 Press Enter 5 Use the ka gt buttons to select the day of the week You can select SUN MON TUE WED THU FRI or SAT 6 Press ENTER Ra am eini Tip To change the time format between 24 hour and 12 hour press the DISPLAY button if Use the remote controller s number buttons to enter the current time You can also use the kaa D buttons Use the remote controller s gt 10 button to select A M or P M 42 8 Press ENTER a oy T LETT Ts The clock is set and the second dot starts flashing Displaying the Day and Time To display the day and time press the remote controller s CLOCK CALL button Press the button again or perform another operation to cancel the time display If the CD receiver is on Standby the day and time will be displayed for 8 seconds While the CD receiver is on the day and time are displayed continuously AccuClock with a Specific Station If for some reason the AccuClock function doesn t set the clock correctly you can specify which FM station the AccuClock function uses This is especially useful if you live cl
51. noisy stereo FM reception suffers from hiss the Auto Preset function doesn t preset all stations or the ST indicator doesn t light up when tuned to a stereo FM station e Check the antenna connections see page 13 to 14 e Change the position of the antenna see page 34 e Move the CD receiver away from a nearby TV or computer e Cars or airplanes can cause noisy interference e The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna e Try setting FM mode to mono see page 34 e Move power cords and speaker cables as far away as possible from the tuner s antenna e When listening to an AM station noise may be heard when you operate the remote controller e Ifnone of the above improves the reception install an outdoor antenna see page 14 If a power outage occurs or the power cable is disconnected e Ifthe preset stations are lost preset them again see pages 37 to 38 The clock and timer settings will be lost Set the clock and timers again see pages 42 to 46 DAB reception is poor e Check the connections and adjust the location and position of antenna After that execute Auto Scan function manually see page 35 e Adjust the location and position of antenna with Tuning Aid function see page 37 e Ifthe reception environment changed by removal etc execute Auto Scan function manually see page 35 48 Troubleshooting Continued Can t adjust
52. ns 5 Press ENTER When the preference has been set Complete appears on the display w To cancel the procedure at any point press the MENU CLEAR button 25 Disc Playback Continued Preferences MP3 WMA Info Select the MP3 WMA file information to be displayed at the start of playback The related information can be also switched with the DISPLAY button File Name File name Folder name Sampling rate default and Bitrate Title Title of the current file Artist name Album title Info Scroll Select the method of scrolling the titles displayed at the start of playback Not Display The title is not displayed Once The title is displayed once and then the default playback time is displayed Repeat The title is repeatedly displayed CD Extra This preference applies to CD Extra discs and determines whether music in the audio session or MP3 WMA files in the data session are played Audio Music in the audio session will be default played MP3 WMA MP3 WMA files will be played Prefix Num This preference determines whether or not the numbers at the beginning of file and folder names are displayed When you create an MP3 WMA DISC ona personal computer each file name may be assigned a number If you don t want these numbers to appear on the display choose Not Display Display The file and folder name including default numbers will be displa
53. ntroller s VOLUME Al buttons Selecting the Input Source Press the remote controller s INPUT lt a 5 buttons repeatedly in order to select the input source On the CD receiver press the INPUT button repeatedly The input sources are selected in the following order CR 545 CD lt gt iPod lt gt USB LINE lt gt AM lt gt FM CR 545UKD CD lt gt iPod lt _ USB LINE lt ____ gt FM lt gt DAB 18 i H 0 0 Oi 8 ON STANDBY S O H i OJOO Oi 10 0 030 010 0 JEC VOLUME 4 Y O INPUT lt gt MUTING Using Headphones Turn down the volume then connect your stereo headphones to the PHONES minijack The speakers output no sound while the headphones are connected Note When you select iPod as the input source the headphones output no sound If use headphones connect it directly to iPod Muting the Sound To mute the output of the CD receiver press the remote controller s MUTING button The MUTING indicator flashes on the display To unmute the CD receiver press the MUTING button again Tips While the CD receiver is muted Turning the VOLUME control on the CD receiver or use the VOLUME 4 buttons on the remote controller will unmute the CD receiver e Ifyou turn the CD receiver off and on the CD receiver will be
54. o the corresponding positive terminal on the CD receiver Connect the negative terminal on each speaker to the corresponding negative terminal on the CD receiver Use the red wires to connect the positive terminals Connect only speakers with an impedance of between 4 and 16 ohms Connecting a speaker with a lower impedance may damage the CD receiver Be careful not to short the positive and negative wires Doing so may damage the CD receiver Do not connect both speaker cables to the same L or R terminals Fig 1 Do not connect more than two speaker terminals to each speaker Fig 2 15 Connecting Other Components About Connections e Before making any connections read the manuals supplied with your other components e Don t connect the power cord until you ve completed and double checked all connections Connecting a Subwoofer Connection Color Coding RCA type audio connections are usually color coded red and white Use red plugs to connect right channel audio inputs and outputs typically labeled R Use white plugs to connect left channel audio inputs and outputs typically labeled L Note Do not put anything on top of the CD receiver as it may interfere with proper ventilation The CD receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer i e a subwoofer with a built in amplifier CD receiver Ww 2 T A no 4 a c
55. ol function do not comply with official CD standards These are special discs and cannot be played with this CD receiver Playback of MP3 and WMA Discs MP3 and WMA files recorded on a CD R CD RW can be played with this CD receiver e Use discs which have been recorded following the ISO9660 Level 2 file system The supported directory depth is eight levels the same as ISO9660 Level 1 Discs recorded with the hierarchical file system HFS cannot be played e Up to 99 folders including the root folder and up to 499 folders including root and files can be recognized and played e Always close the disc tray Notes e A disc recorded with a recorder or personal computer may not play in some cases Cause Disc s characteristics damaged or dirty disc dirt on player s lens dew condensation etc e A disc recorded on a personal computer may not play because of the application settings or environment Record the disc with the proper format Contact the application maker for details e Adisc with insufficient storage capacity may not playback properly Playback of MP3 Discs e Only MP3 files with the extension MP3 or mp3 are supported This CD receiver supports files recorded in MPEG 1 Audio Layer 3 32 320kbps with the sampling rate of 32 44 1 48kHz e Variable bitrates VBR between 32kbps and 320kbps are supported The time information during VBR playback may not display correctly Playba
56. on The disc tray closes and playback starts Then the b gt indicator appears To stop playback Press the W button Playback stops automatically when the last track has been played To pause playback Press the P H button The Pause HI indicator appears To resume playback press the B gt EE button again To remove the CD Press the 4 button to open the disc tray Display during Stop e Audio CD Display 20 DISC TOTAL lights up while the disc information is being displayed TRACK DISCTOTAL Total playing time Total number of tracks n air imi a A i f E Pt e MP3 WMA DISC Display Disc name or file format Total number of files Total number of folders Selecting Tracks To return to the beginning of the track currently playing press the kdd button Press the kdd button repeatedly to select earlier tracks While playback is stopped pressing the ka a button will select the previous track Press the gt button repeatedly to select subsequent tracks On MP3 WMA DISC you can select MP3 WMA files in other folder see page 22 Disc Playback Continued Using the Remote Controller Press to select tracks e Press the Previous k lt button to locate the beginning of the currently playing or paused track Press it repeatedly to select earlier tracks e Press the Next P button repeat
57. ork e Make sure the clock has been set correctly see pages 17 42 and 43 e Timed operation will fail if the CD receiver is on at the specified On time so make sure it s set to Standby see page 46 The timer may overlap with another timer If you program several timers make sure they don t overlap e Ifyou press the SLEEP or TIMER button while a timed operation is in progress the timer will be cancelled 49 Troubleshooting Continued Clock The time is not displayed in Standby mode The clock is not displayed in Standby mode Press CLOCK CALL the clock display appears for eight seconds e If there is a power failure the clock will stop and Adjust will appear when the clock is displayed with the CLOCK CALL button Set the clock in this case If AccuClock is enabled the clock will be set automatically Others RESET appears after the power cord is connected e Because the power cord was disconnected for a long time the memory contents have been reset and all settings returned to the factory default settings Perform the required settings again The power turns on when the power cord is connected to a power outlet e Ifthe power cord is disconnected while the power is ON the power will turn ON the next time the power cord is connected If there is a power failure while the power is ON disconnect the power cord Onkyo is not responsible for damages such as CD rental fees due
58. ose to a country s border where stations from different time zones can be received Note that the FM station must support RDS CT Clock Time information z E 3 H 5 i 2 TIMER O Ox 0 H Z zi Fa 6 IS IS a l NTER 010 0 00 OOO 1080 A gO y Oi 0 TONE 1 Press the TIMER button repeatedly until Clock appears 2 Press ENTER 3 Use the ka gt gt buttons to select AccuClock 4 Press Enter The frequency of a station that the CD receiver has previously searched for may appear on the display Setting the Clock Continued 9 Use the ka gt buttons to specify the frequency of a station that s broadcasting RDS CT information AUTO PO4FMST RDS 6 Press ENTER The specified frequency will be used the next time the AccuClock function runs If the specified station is not broadcasting RDS Not RDS will be displayed in which case you should return to step 5 and specify another frequency Notes e Once the AccuClock function is working it will automatically update the clock daily at 2 00 3 00 and 14 00 but only when the CD receiver is on Standby e Ifyou ve set the AccuClock function but it s not updating the time automatically make sure a strong signal is being received from the specified RDS station Also make sure that the station is actually broadcast
59. r best results install the outdoor FM antenna well away from tall buildings preferably with a clear line of sight to your local FM transmitter Outdoor antenna should be located away from possible noise sources such as neon signs busy roads etc For safety reasons outdoor antenna should be situated well away from power lines and other high voltage equipment Outdoor antenna must be grounded in accordance with local regulations to prevent electrical shock hazards Using a TV FM Antenna Splitter It s best not to use the same antenna for both FM and TV reception as this can cause interference problems If circumstances demand it use a TV FM antenna splitter as shown TV FM antenna splitter To CD receiver To TV or VCR Connecting Speakers Right speaker Left speaker O Red wires Speaker O Terminal posts Strip about 15 mm 5 8 of insulation from the ends of the speaker cables and twist the bare wires tightly Unscrew the terminal Fully insert the bare wire making sure that it s CD receiver touching the threaded shaft in the center Screw the Le or terminal tight N oS Q Yo Wey gt N gt WY NS Q be HE DP Connect the right speaker to the CD receiver s right R SPEAKERS terminals Connect the left speaker to the left L SPEAKERS terminals Connect the positive terminal on each speaker t
60. reful not to prick your finger Adjusting the AM antenna Adjust the location and position of the AM antenna while listening to an AM station to achieve the best reception Listening to the Radio Continued Displaying FM AM Radio Information ON STANDBY SLEEP T MER CLOCK CALL DISPLAY Press the remote controller s DISPLAY button repeatedly to display more radio information FM AM Frequency l l Presetname Ifthe selected preset has no name No Name appears briefly and then the frequency is displayed See Naming Presets on page 39 Receiving RDS Press the DISPLAY button repeatedly to display the following RDS information Frequency and preset number Preset name Program Service Name Radio Text if available RDS is only for the areas where RDS broadcasts are available What is RDS RDS stands for Radio Data System and is a method of transmitting data in FM radio signals It was developed within the European Broadcasting Union EBU and many European FM radio stations use it these days The CD receiver supports and displays the Program Service Name PS and Radio Text RT types of RDS data The RDS indicator appears on the display when the CD receiver is tuned to an FM station that supports RDS Notes e Ifthe signal from an RDS station is weak RDS data may be displayed intermittently or not at all e The message Waiting
61. remove the adapter lift the back side up If the adapter is difficult to remove insert a thin object into the slot and lift the adapter up Always use the Universal Dock Adapter enclosed with the iPod model to correctly set the iPod in the CD receiver Note The slot s connection terminal could be damaged if the iPod is set in the CD receiver dock without using the Universal Dock Adapter Please purchase a commercially available dock adapter when using an iPhone or when the Universal Dock Adapter has been lost or damaged Make sur the slot is at the rear Playing iPod iPhone 1 Inserting your iPod into the CD 3 To start playback press the H receiver s dock for iPod button Playback will begin To pause playback Press the B gt HE button The Pause HI indicator appears To resume playback press the B E button again Notes e You can see the contents of videos and photos in your iPod on TV see page 17 Confirm your iPod if video output is available The volume level is adjusted by using the VOLUME knob or the buttons on the remote controller Adjusting the volume on your iPod has no effect In case you inadvertently move your iPod volume control make sure the volume level is not set too high before you reconnect your headphones Raise the dock cover insert your iPod ensuring that it is seated correctly Notes e The appropriate iPod universal dock adapter must
62. reserved UA VUNE DU DAU DUAA RAA UUA UIR A
63. reset the message Overwrite CR 545 appears You can store up to 40 stations as presets and To overwrite the previously stored station this can be any combination of FM and AM press the ENTER button stations For example 27 FM and 13 AM or To not overwrite the previously stored 32 FM and 8 AM station press the MENU CLEAR button Although FM and AM presets share the same If the message Memory Full appears all numbers they re selected independently For the presets 40 presets for CR 545 30 DAB example preset 1 will store an FM station presets and 30 FM presets for when the FM band is selected and an AM CR 545UKD have been stored and you ll station when the AM band is selected need to erase some presets before you can CR 545UKD store any more stations see page 41 e You can store up to 30 stations as presets for 6 Repeat steps 1 to 5 to preset more radio DAB and up to 30 stations for FM stations Stations can be stored to presets in any order For example you could store preset 5 first 1 Presetting DAB Stations Manually second and so on CR 545UKD 1 Tune into the station that you want to store as a preset see page 36 2 Press the MODE button the preset number P XX flashes 7 ON STANDBY SLEEP TIMER CLOCKCALL MODE Sef O l MENU CLEAR en on l enren 3 Use the lt gt buttons to a gt select a preset Cy p
64. rsonnel For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel IMPORTANT The wires in the mains lead are coloured in accordance with the following code Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red IMPORTANT The plug is fitted with an appropriate fuse If the fuse needs to be replaced the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug Check for the ASTA mark or the BSI mark on the body of the fuse If the power cord s plug is not suitable for your socket outlets cut it off and fit a suitable plug Fit a suitable fuse in the plug For European Models Declaration of Conformity We ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6 82194 GROEBENZELL GERMANY declare in own responsibility that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065 EN55013 EN55020 and EN61000 3 2 3
65. s during memory playback use the remote controller s kaa gt buttons Checking What s on the Playlist To check what tracks are on the playlist with playback stopped use the lt lt a P gt buttons to scroll through the playlist Removing Tracks from the Playlist e While memory playback is stopped press the MENU CLEAR button Each press removes the last track from the playlist The playlist will be deleted when you cancel memory playback select random playback press the 4 button to open the disc tray or turn off the CD receiver Coes Memory Playback To cancel Memory playback press the MODE button repeatedly until the MEMORY indicator disappears e Memory playback is cancelled when you press the 4 button to open the disc tray or turn off the CD receiver Setting DISC Preferences With the DISC preferences you can change the way MP3 WMA file information is displayed and the way MP3 WMA DISC is played ON STANDSY SLEEP TIMER CLOCK CALL MENU CLEAR ENTER The MP3 WMA preferences can be set only when the input source is set to CD and playback is stopped 1 Press the MENU CLEAR button repeatedly until MP3 WMA Info appears 2 Use the k4 gt gt buttons to select the preference you want to change The preferences are explained in the next column Press ENTER 4 Use the K lt gt buttons to select the preference s optio
66. se the K lt 4 gt buttons to select the source and then press ENTER You can select the following sources CR 545 CD iPod USB FM AM or LINE CR 545UKD CD iPod USB DAB FM or LINE If you selected other than FM AM or DAB skip to step 4 Setting the Clock Continued 5 CR 545 8 If you selected FM or AM use the kaa gt buttons to select the radio preset and then press ENTER CR 545UKD If you selected DAB or FM use the kaa gt buttons to select the radio preset and then press ENTER alame kag j 9 Use the ka gt gt buttons to select Once or Every and then press ENTER Select Once for one off operation Select Every to perform the same operation every week 10 If you selected Once use the kaa gt buttons to select the day and then press ENTER You can select SUN MON TUE WED THU FRI or SAT Skip to step 8 If you selected Every use the kaa gt buttons to select the 11 day Everyday or Days Set and then press ENTER If you selected other than Days Set skip to step 8 You can select the followings MON amp TUE amp WED amp THU amp FRI T q SUN Days Set amp Everyday amp SAT If you selected Days Set use the kaa gt buttons to select the first day and then press ENTER
67. se the number buttons to enter folder numbers If playback is stopped playback starts with the first MP3 WMA file in the specified folder If playback is already in progress press ENTER to play the first MP3 WMA file in the specified folder To Select Press Folder 8 Folder 10 Folder 34 OOO used to enter numbers over 10 Disc Playback Continued 3 Use the number buttons to enter the file number Playback starts If a folder contains more than 99 MP3 WMA files doubledigit file numbers must be preceded by zeros To specify file 5 press gt 10 0 0 and 5 Displaying MP3 WMA Information You can display various information about the MP3 WMA file currently playing including tags such as title artist name and album name During playback press the DISPLAY button repeatedly to display the following MP3 WMA information File name Elapsed time The length of time that the current MP3 WMA file has been playing default display FOLD FPE File name Name of the current MP3 WMA file FE Folder name 4 Name of the current folder Sampling rate and bitrate Sampling rate and bitrate of the current MP3 WMA file Title Elapsed time The length of time that the current MP3 WMA file has been playing default display MP3 gt FOLD FILE Title name Title of the current file if tag present
68. sing Presets FM AM only 2 g 2 JO 0 0 Oi O MENU CLEAR 5 OOQ OOO AE ENTER i Ly b Select the preset you want to erase see page 39 Press the MENU CLEAR button and then use the ka gt gt buttons to select PresetErase Press ENTER A message requesting confirmation appears To cancel the Preset Erase function at this point press the MENU CLEAR button To erase the preset press ENTER The preset is erased and Complete appears on the display lt P ACs I5 E S O O10 0 OO 0 Z 6 IS IS a MENU CLEAR g d 0 0 Oi OOO ENTER Press the MENU CLEAR button and then use the ka gt gt buttons to select Dimmer Press Enter Set the brightness with ka gt gt buttons Off Normal 1 Dim 2 Dimmer Press Enter 41 Setting the Clock ee ON STANDBY SLEEP TIMER CLOCK CALL CLOCK CALL Cee E TIMER ps DISPLAY O G amp H ra w 186 68 um buttons Pars TWV ay O QO iC O Cc ENTER laa gt r t 2 The AccuClock function sets the clock automatically the very first time the CD receiver is plugged into a wall outlet see page 17 If for some reason the clock cannot be set automatically use the following procedure to set it manual
69. software to the latest version The iPod item highlighted can be moved by ka a gt gt buttons during the iPod menu mode indicator is lit If the tracks are skipped by pressing ka a gt buttons press the remote controller s MENU CLEAR button and confirm the indicator on the display Then press ka a P gt buttons External Components No sound is heard from a connected component e Make sure the correct input source is selected see page 18 e Make sure the analog audio cable is connected correctly see pages 16 e Make sure that all audio connecting plugs are pushed in all the way see page 16 No sound is heard from your turntable e Make sure the turntable has a built in phono equalizer e Ifthe turntable doesn t have a phono equalizer built in you must provide one Remote Controller The remote controller doesn t work properly e Make sure the batteries have been installed with the correct polarity see page 6 e Replace both batteries with new ones Do not mix different types of batteries or new and old batteries e The remote controller is too far away from the CD receiver or there s an obstacle between them e The CD receiver s remote control sensor is being subjected to bright light inverter type fluorescent light or sunlight e The CD receiver is located behind the colored glass doors of a audio rack or cabinet Timers Timer playback doesn t w
70. t before proceeding 1 While playback is stopped press the FOLDER button The CD receiver enters All Folder mode and the name of the first folder appears on the display MP3 FOLD dopi p 22 2 Use the k4 gt gt buttons to select the other folders You can select any folder that contains MP3 WMA files To play the first file in the selected folder go to Step 4 3 To access the files inside the folder press the FOLDER button The name of the first MP3 WMA file inside the folder is displayed Use the kaa gt buttons to select the MP3 WMA files within the folder MPS To select another folder press the FOLDER button again and then use the lt lt BB buttons to select it 4 To start playback press the ENTER or gt I button Playback will start with the specified file or folder and continue until all of the MP3 WMA files on the disc have been played To select an MP3 WMA file in another folder during playback press the FOLDER button select the folder by using the lt gt buttons and then press ENTER Now use the ka a gt I buttons to select the MP3 WMA files within that folder e Pausing Playback To pause playback press the B gt button To resume playback press it again Selecting MP3 WMA Folders and Files by Number 1 Press the FOLDER button The current folder name is displayed 2 U
71. the next character e Inserting a new character Move the cursor with the INPUT lt B buttons and flicker the character to the right of the insertion position To cancel the Name In function press and hold the MENU CLEAR button for 2 seconds 6 When you ve finished entering the name press the ENTER button The preset is named and Complete appears on the display Available Characters Button A a 1 1 1 1 1 2 ABC2 abc2 2 3 DEF3 def3 3 4 GHI4 ghi4 4 5 JKL5 jkI5 5 6 MNO6 mno6 6 7 PQRS7 pqrs7 4 8 TUV8 tuvs 8 9 WXYZ9 wxyz9 9 gt 10 QON OL e iON 10 0 0 0 0 FOLDER space space space kea DP See below See below See below The next symbol can be selected with the Kd gt buttons 72 amp lt gt _s SKI2 a pn o 4 space 40 Copying Presets FM AM only With the Preset Copy function you can organize your presets in the order you want When you copy a preset its name is also copied Y SLEEP TIMER CLOCK CALL O C10 299 99908 OO MENU CLEAR Oc ENTER am TUNER i y 6 1 Select the preset you want to copy see page 39 2 Press the MENU CLEAR button and then use the keq gt buttons to select PresetCopy 3 Press ENTER The number of the preset to be copied flashes 4 Us
72. to unsuccessful recordings caused by the unit s malfunction Before you record important data make sure that the material will be recorded correctly The CD receiver contains a microcomputer for control functions In very rare situations severe interference noise from an external source or static electricity may cause it to lockup In the unlikely event that this should happen unplug the power cord wait at least 5 seconds and then plug it again If it s not cleared please refer to How to reset to factory default on page 47 50 Specifications General Power Supply AC 220 230 V 50 60 Hz Power Consumption 36 W Stand by Power Consumption 0 5 W iPod not charging Dimensions 215 x 98 x 334 mm W x H x D 8 7 16 x 3 7 8 x 13 1 8 Weight 4 2 kg 9 3 Ibs Audio Inputs Analog Inputs 1 LINE IN Audio Outputs Subwoofer Pre Output 1 Speaker Outputs 2 Phones 1 Video Output 1 Composite Amplifier Section Power Output 2ch x 40 W 4 Q 1 kHz 10 2ch driven THD Total Harmonic Distortion 10 Power Rated 0 05 1 kHz 1 W Damping Factor 40 Front 1 kHz 4 Q Frequency Response 20 Hz 20 kHz 0 3 dB LINE IN Tone Control 10 dB 80 Hz BASS 10 dB 10 kHz TREBLE 7 5 dB 80 Hz S BASS Signal to Noise Ratio 70 dB LINE IHF A Speaker Impedance 4Q 162 Tuner Section
73. unit is moved from a cold place to a warm place A heater is turned on or cold air from an air conditioner is hitting the unit Inthe summer when this unit is moved from an air conditioned room to a hot and humid place The unit is used in a humid place e Do not use this unit when there s the possibility of moisture condensation occurring Doing so may damage your discs and certain parts inside this unit If condensation does occur unplug the power cord and leave the unit for two to three hours in the room temperature Precautions Continued This unit contains a semiconductor laser system and is classified as a CLASS 1 LASER PRODUCT So to use this model properly read this Instruction Manual carefully In case of any trouble please contact the store where you purchased the unit To prevent being exposed to the laser beam do not try to open the enclosure CAUTION CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE The label on the right is applied on the rear panel CLASS 1 LASER PRODUCT 1 This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet 2 To prevent the laser from being exposed do not remove the cover Refer servicing to qualified pe
74. unmuted Basic Operations Continued Adjusting the Bass Treble and Balance 1 Press the TONE button to select Bass 2 Use the kea gt P buttons to adjust the bass Press ENTER and then use the kaa gt buttons to adjust the treble The default setting is 0 You can adjust the bass and treble from 4 to 4 Press ENTER and then use the kea gt gt buttons to adjust the balance The default setting is 0 You can adjust Using the Super Bass Function the balance from L 5 to 0 then 0 to R 5 To turn off the Super Bass function press the S BASS button Tip The S BASS indicator disappears To adjust the bass Se ae To turn on the Super Bass function press the treble and balance you Of E S BASS button again can also use TONE 9 Note BALANCE button and knob Note If you press no buttons for 8 seconds the previous display will appear automatically The default setting of Super Bass function is on TONE BALANCE knob 19 Disc Playback Display VOLUME Disc tray Using the CD Receiver 1 Press the 4 button to open the disc tray Tip Pressing the 4 button while the CD receiver is on Standby will turn on the CD receiver and open the disc tray Place the CD on the tray with the label side facing up Place 8 cm CDs in the center of the tray To start playback press the H butt
75. y the following music file information File name Elapsed time The length of time that the current MP3 or WMA file has been playing default display MP3 gt vse FOLD AE File name Name of the current file FILE Folder name 4 Name of the current folder FOLD Sampling rate and bitrate Sampling rate and bitrate of the current file Title Elapsed time The length of time that the current MP3 or WMA file has been playing default display MP3 gt vse PO ALE Title name 4 Title of the current file if tag present Artist name 4 Name of the artist if tag present ALBUM Album name Name of the album if tag present y Notes e If there is no data Unknown Title Unknown Artist or Unknown Album will be displayed e To display the drive name press the DISPLAY button while playback is stopped e Ifa file or folder name contains any characters that cannot be displayed File_n ro Folder_n will be displayed n is a file or folder number e TIfatitle artist or album name contains any characters that cannot be displayed a centered dot will be displayed in place of those characters Setting USB Preferences With the USB preferences you can change the way USB file information is displayed For the USB preferences see page 25 to 26
76. yed as it is Not Display The file and folder name will be displayed but numbers will be hidden 26 The following table shows a few examples of numbered file and folder names and how they will appear with the Display and Not Display options gt Prefix Num Option File folder name Display Not Display 01 Pops 01 Pops Pops 10 Rock 10 Rock Rock 16_Jazz 16_Jazz Jazz 21th 21th 21i Sey Century Century 05 07 20 Album 0907 20 Album Album Dimmer Select the CD receiver s display brightness Off Normal default 1 Dim 2 Dimmer iPod iPhone Playback When you select iPod as the input source the headphones output no sound If use headphones connect it directly to iPod Before using your iPod with the CD receiver be sure to update your iPod with the latest software available from the Apple Web site If you leave your iPod paused when using it on its own eventually it will go into hibernation If you insert it into the CD receiver dock in this state you ll need to wait a few moments before your iPod is ready for use Always remove your iPod before moving CD receiver Depending on your iPod or the type of content being played some functions may not work as expected Installing the iPod iPhone Universal Dock Adapter First with the adapter slot facing the back fit in the front of the adapter and then press in the back until a click is heard To

ONKYO CS-545

Contents

Download Pdf Manuals

Related Search

Related Contents