Home

Philips 22HFL4372D 22" HD-Ready 3D compatibility Black

1. 3 Select a menu language from the list then press OK EN 25 English Change other settings Energy efficient settings 1 While watching TV press the green button 2 Select one of the following settings then press OK Energy saving Applies a combination of picture settings to reduce energy consumption e Mute screen Turns off the T V display Muting the screen saves energy if you just want to listen to audio from the TV Audio lip sync Turn on digital audio lipsync to automatically sync the image on your TV to audio from a connected Home Theatre System 1 while watching T V press A 2 Select Setup gt TV settings gt Preferences gt Audio Out delay gt On then press OK TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press s 2 Select Status then press OK The clock is displayed on the bottom right hand corner of the T V screen 26 EN Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving 1 while watching T V press A 2 Select Setup gt TV settings gt Preferences
2. 0 9 Numeric buttons Selects a channel or setting iK MUTE Mutes or restores audio output MHEG CANCEL UK only Enables audio commentary for the visually handicapped EN 7 English 45 1 Volume Increases or decreases volume BACK Returns to a previous screen Returns to the previously viewed channel 7 Colour buttons Selects tasks or options When Professional mode is On press to operate Multi remote control function Red button DEMO To select the red option access digital Interactive TV services or watch T V demonstration clips Green button To select the green option or the Eco settings Yellow button To select the yellow option or the Help menu Blue button Audio Descriptor For RF Digital TV only UK only Enables audio commentary for the visually handicapped LE MyChoice Opens MyChoice menu for entering authorized PIN codef 9 Note Channel grid is not available in some specific modes Remote control usage When using the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects ee PHILIPS Basic TV menus Home The home menu gives you easy access to connected devices picture and sound settings and other useful features 1 Press A 2 Selec
3. In the channel list press E2 Select Select list gt Analogue or Digital then press OK Depending on your selection only digital or analogue channels become available Adjust TV volume Theme TV To increase or decrease volume Press A on the remote control Press A on the side of the TV To mute or unmute sound Press K to mute the sound Press K again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 30 Use Smart picture settings 1 Press f 2 Select Setup gt TV settings gt Picture gt Smart picture then press OK 3 Select one of the following settings Personal Sets the TV to your personal preferences Vivid Rich and dynamic settings ideal for daylight use Natural A natural picture setting e Cinema Ideal settings for watching movies Game Ideal settings for gaming e Energy saving The most energy conscious settings e Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos Custom Allows you to customise and store personal picture settings 4 Press OK to confirm your choice D Press D to exit Use Smart sound settings Use the Smart sound experience bar to acces
4. Mark the channels to be blanked Hide channel Hide the current channel on the Channel Grid This channel can NOT be selected by Channel number or P P MyChoice setup The MyChoice setup feature enables the configuration of the the MyChoice PayTV channel list and the other channels list In the event that the MyChoice function is activated and a valid PIN code is received the channels in RO will become available to the guest In the event that the MyChoice function is activated and no valid PIN code is received the channels in R1 will become available to the guest Mark the channels that are to be included in list RO and R1 ThemeTV setup The ThemeTV setup feature enables the configuration of the UI and the configured channels For country specific themes the Theme 1 up to Theme 12 can be configured For the specific other themes Theme 13 up to Them 15 can be configured Mark the channels that are to be included in the themes Store Settings To confirm the changes in the PBS Setup menu the changes MUST be stored Action Press gt or OK to store the new settings EN 35 English Smart Clone Place a USB Memory stick in the USB side I O connector USB to TV TV will read and store Cloning data from USB stick TV to USB TV will store Cloning data to USB stick RF Download Instead of using USB memory device to do cloning tbd and firmware update this upgrading is also p
5. Select a picture then press Select Set as Scenea then press OK Select Yes then press OK Press any key to exit Scenea DUE er x Universal access Enable universal access Where supported by your digital TV broadcaster this T V allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must turn on universal access in the Preferences menu 1 Press f 2 Select Setup gt TV settings gt Preferences gt Universal access gt On then press OK Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 while watching TV press EJ 2 Select Universal access and press the green button to enter Visually impaired J Usethe following buttons to select Red Off Turn off visually impaired audio Green Speakers Hear visually impaired audio from speakers only Yellow Headphones Hear visually impaired audio from headphones only Blue Speakers headphones Hear visually impaired audio from speakers and headphones only 4 Press D to exit Note he green and yellow buttons are not applicable if EasyLink Remote Control is enabled r3 o verify whether visually impaired audio is available pres
6. To switch on e If the standby indicator is off press POWER at the side of the TV e fthe standby indicator is red press T Standby On on the remote control e he front LED indicator does not turn on when the TV is switched on The TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behavior 10 EN To switch to standby Press Standby On on the remote control L gt The front LED indicator switches to red To switch off Press POWER at the side of the TV L The standby indicator switches off m Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the T V power cable from the power outlet Switch channels an Na a B 1 Theme TV E u u ms u u Li A Pd DD DD TD es C9 C aq Oe O20 OND J Ld ad 17 e Press P on the remote control or P CH on the side of the T V Press QA then select Channel list to use the channel list Press O to return to the previously viewed channel Enter a channel number using the Numeric buttons To view analogue or digital channels only Filter the channel list to access analogue or digital channels only 1 2
7. leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type 3 Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable Copyright VESA FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association Kensington and Micro Saver are registered US tra
8. HF Mode Stand alone The VSecure Unprotect key is to be stored once via USB and will remain available until manual erasing it RF Static The VSecure Unprotect key is to be stored via RF and will remain valid until manual erasing it or receiving a successive VSecure Unprotect key RF Dynamic The VSecure Unprotect key is to be stored via RF and will remain valid until power down or receiving a successive VSecure Unprotect key Load key to USB Action Place a USB memory device in the USB side I O Press gt or OK to copy the VSecure Authorization key to the USB memory device Load key to TV Action Place a USB memory device with a valid VSecure Unprotect key in the USB side I O Press gt or OK to copy the VSecure Unprotect key to the USB memory device Vsecure self test Action Internal self test to validate VSecure After this load proper hotel specific keys Program Info This function is to set the necessary DVB parameters to locate the proper VSecure RF 34 EN channel to load the VSecure RF Static or RF Dynamic key s Frequency Frequency of MUX 0362 Medium Cable or Antenna DVB T C Service ID Hg dd 00001 ONID TH Hd 00000 NID TH gd 00000 TSID TdgEH HH 00000 Symbol Rate 6 900 Modulation QAM16 QAM32 QAM64 QAM128 QAM256 Above parameters must match head end configuration Erase key option This function is to set the store
9. gt Clock gt Auto clock mode 3 Select Automatic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 Inthe Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving Is enabled or disabled for your time zone Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection then select Done TV location A range of TV settings are applied to suit the location of the TV Shop or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all T V settings 1 while watching T V press ft 2 Select Setup gt TV settings gt Preferences gt Location gt Home or Shop then press OK 3 Restart the T V Stand mount or wall mount Specific TV settings are applied to suit the mounting location of the T V 1 Inthe Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update software T V Check version 1 Press A 2 Select Setup gt Software settings gt Current software info then press OK The ve
10. 7 The upg Help file is extracted 8 Disconnect the USB flash drive from the PC Do not switch off the TV or remove the USB flash drive during the update e fa power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue the update as soon as power Is restored e fan error occurs during the update retry the procedure If the error reoccurs contact Philips Consumer Care 1 Switch on the TV 2 Connect the USB flash drive containing the upg Help file to the USB connector on the TV Disconnect all other USB devices from the TV Press ft Select Setup gt Software settings gt Local updates he updates screen appears 5 Select the upg Help file and press OK A message appears displaying the update status Follow the on screen instructions to complete the update and restart your TV pepe Reinstall the TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press f 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the on screen instructions 6a Professional Professional Setup Remote mode control 22AV8573 optional Instruction English Introduction Included in this TV is a special functional mode that allows the TV to be configured for commercial application This feature is called Professional mode This section has been designed to help ins
11. OPEN ATTENTION NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective 2 EN pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Open source software This television contains open source software Philips hereby offers to deliver or make available upon request for a charge no more than the cost of physically performing source distribution a complete machine readable copy of the corresponding source code ona medium customarily used for software interchange This offer is valid for a period of 3 years after the date of purchase of this product To obtain the source code write to GBU Customer Care Manager Customer Care department Philips Lighting GBU Hospitality Hurksestraat 2c 5652 AJ Eindhoven The Netherlands Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips
12. lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington lock between the slot and a permanent object such as a heavy table EN 41 English 8 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats e Resolution refresh rate 640 x 480 60Hz e 800 x 600 60Hz e 1024 x 768 60Hz e 1280 x 720 60Hz e 1280 x 768 60Hz e 1280 x 1024 60 Hz e 1360 x 768 60 Hz e 1440 x 900 60Hz For Full HD only e 1680 x 1050 60Hz For Full HD only e Via HDMI DVI input Video formats e Resolution refresh rate e 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 60Hz 1080i 50Hz 60Hz 1060p 24Az 25Hz 30AZ SOZ 60Hz 42 EN Multimedia e Supported storage device USB Only FAT or FAT 32 USB storage devices are supported e Supported multimedia file formats mages JPEG Audio MP3 Note e Multimedia file names must not exceed 128 characters Tuner Reception Transmission e Aerial input 5ohm coaxial IEC75 e DVB DVB Terrestrial DVB T MPEG4 only in some models e V system DVB COFDM 2K 8K PAL I B G D K SECAM B G D K L L e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF Remote control e Type RC 6 e Batteries 2 x AAA LRO3 ty
13. on volume When the guest switches the TV on it will play at the specified volume level Maximum volume This option specifies the maximum allowable volume level of the TV Switch on channel When the guest switches the TV on it will play at the specified channel Enter TV Channel Setup Action Action SSB Firmware SSB NVM Standby Firmware ThemeTV All Frequency Medium Service ID ONID NID TSID Symbol Rate Modulation Start Download Welcome message The Welcome message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on This helps to personalize the hotel experience for guests The Welcome message can consist of 2 lines of text with each line containing a maximum of 20 alphanumeric characters Use Navigation buttons on the remote control to compose the Welcome message Note Welcome message is always disabled if you select BDS Mode Setting gt OSD display gt Off Display message Select to show the welcome message at power up cycle On to activate Off to disable Welcome message line 1 Line 1 Sets the characters of the first line message Welcome message line 2 Line 2 Sets the characters of the second line message Control Settings Local Keyboard lock Off The TV local buttons will function normally The TV local buttons are locked except the POWER button On Remote Contro
14. or other objects never cover the ventilation slots on the TV Risk of damage to the T V Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different e Risk of injury fire or power cord damage Never place the TV or any objects on the power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable e Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time e Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are Images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use su
15. section to set the Professional mode menu Side controls and indicators 0 1 Increases or decreases volume In the home menu press these buttons to move horizontally D ft Home Accesses the home menu Press again to launch an activity in the home menu 3 P CH Switches to the next or previous channel In the home menu press these buttons to move vertically 4 b Power Switches the TV on or off Guest remote control EPG TELETEXT PHILIPS TELEVISION 3 Gee AVEO OOWO CO JOO eG b Standby On e Switches the TV to standby if it is on e Switches on the TV if it is in standby LL EPG TELETEXT Accesses the browse menu to select TV channel list the Electronic Programme Guide and teletext ALARM Lauches Alarm time menu Only applicable in Hospitality mode and in some models AM Selects connected devices ft EXIT MENU Accesses the home menu E OPTION Options menus offer convenient settings related to what Is on screen OK Confirms an entry or selection AV lt P Navigation buttons Navigates menus and selects items i INFO Displays program information when available If the information spans multiple pages press OPTIONS to go to the next page Jy Theme TV P Programme Switches to the next or previous channel When the TV menu is on this functions as Page Up Down
16. to the T V add this device in the home menu for easy access In the home menu select Add your devices then press OK Follow the instructions on screen to add the device to the home menu To remove a device from the home menu select the item press and select Remove this device Press OK Setup Setup in the home menu allows you to change most of the TV settings including Picture or sound settings Installation or update of T V channels Update of TV software e Other special features 1 In the home menu select Setup then press OK 2 Select an item with the Navigation buttons then press OK Quick picture and sound settings Guides you through picture and sound settings TV settings Advanced picture and sound settings Search for channels or Search for satellite Guides you through antenna or satellite if available channel installation Channel settings or Satellite settings Advanced channel settings Update software Guides you through an update of the TV software Software settings Advanced T V update settings e Watch demos Demos of special features available with the TV EN 9 English Options Option menus offer convenient settings related to what Is on screen 1 Press amp 2 to see what options are available 2 To exit press 8 again Watch T V Swith on off or to standby Oe Os B OLD
17. to the guest PrimeSuite Remote Control The Remote Control is designed to support together with the PrimeSuite television a predictable behavior Activate the television 2 Standby Switches the TV to standby Li Home if itis on Switches on the TV if itis in standby Access to the home menu The home menu gives easy access to watch TV select connected devices and to make TV settings picture sound set the sleep timer and alarm clock PHILIPS 7 Browse Accesses the browse menu to select Electronic Program Guide Now Next channel information TV channel list Display Channel Grid Text Display Teletext service Back Returns to a previous menu screen Press and hold to return to watch TV Not supported in MHEG mode EN 37 English Options Access to options for the current selection Watch TV and press Options will bring up a menu to select What s on Subtitles Audio language Dual l Il Status Info Now Next channel information MyChoice MyChoice activation key ThemeTV ThemeTV activation key 2 osr On Screen Remote Control Virtual control keys for HDMI CEC devices Alarm Alarm Time Menu to en disable clock alarm 3 b EN External Access to the home menu The home menu gives easy access to watch TV select connected devices and to make TV settings picture sound set the sleep timer and al
18. 3 4 Select Search then press OK 5 6 When the correct channel is located select Store then press OK Press to exit e e Ifthe reception is poor reposition your antenna and repeat the procedure e f you receive the channel with DVB C the options Symbol rate mode and Symbol rate are available In Symbol rate mode select Automatic unless your cable provider supplies you with a specific symbol rate value Install satellite channels For certain models only If your satellite is connected to the SAT connector you can receive satellite channels 1 while watching T V press ft 2 Select Setup gt Search for satellite gt Reinstall channels 3 Follow the on screen instructions to complete the installation of satellite channels 4 Once complete select Finish and then press OK Fine tune analogue channels If the reception of an analogue T V channel is poor try fine tuning the T V channel 1 Press f 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation gt Fine tune and then press OK ad zi OK 5 Select Store current channel to store the fine tuned channel under the current channel or select Store as new channel to store under a new channel number Change language settings Audio subtitle teletext languages Digital TV channels may stream several audio subtitle and tele
19. Lokalsamtale potaczenie lokalne Chamada local Apel local MecTHbi 3BOHOK Lokalni poziv Bezplatny hovor lokalni klic 0 10 Por minuto Lokalsamtal Appel local Ortsgesprach Chiamata locale Sehirici arama local Micuesun BUKANK This information is correct at the time of press For updated information see www philips com support Contents 1 Notice 2 Important 3 TV overview Side controls and indicators Guest remote control Basic TV menus Watch TV Watch a connected device 4 Use more of your product Use Teletext Favourite channels Use EPG Use timers Use locks Use the TV clock Use subtitles Access multimedia Use Scenea Universal access 5 Set up the TV Change picture and sound settings Change channel settings Install channels Change language settings Change other settings Update software Reinstall the TV 6a Professional mode instruction Introduction Benefits of Professional mode Professional Setup Remote control 2573 optional bh OO O ON _ 13 13 14 14 15 15 16 16 T4 18 18 20 20 22 23 25 26 2 28 29 23 29 29 Activating the Professional mode setup menu Professional mode options 6b Guest mode instruction 29 30 37 7 Connect devices Back connector Side connector Connect a computer Use a Conditional Access Module Use Philips EasyLink Use a Kensington lock Product information Supported display resolutions Multimedia Tuner Reception
20. Register your product and get support at www philips com welcome 22HFL43 72D 10 26HFL43 72D 10 S2ARAS72DA0 PHILIPS 3 EN User Manual PHILIPS Osterreich Belgie Belgique BbArapua Hrvatska Cesk republika Danmark Estonia Suomi France Deutschland E Aada Magyarorszag Ireland Italia KasakcrTaH Latvia Lithuania Luxemburg Luxembourg Nederland Norge Polska Portugal Romania Poccua Cp6nija Slovensko Slovenija Espana Sverige Suisse Schweiz Svizzera Turkiye United Kingdom Ykpaina 0810 000205 078250145 3592 489 99 96 01 6403 776 800142840 3525 8759 6008600 09 2311 3415 0821 611655 01803 386 852 0 0800 3122 1280 0680018189 North 0800 055 6882 South 1800 PHILIPS 7445477 840320086 7 727 250 66 17 67228896 52737691 40 6661 5644 0900 8407 2270 8111 022 3491504 800 780 903 031 810 71 25 0800 89 49 10 Moscow 495 961 1111 Outside Moscow 8 800 200 0880 381 114 440 841 0800 004537 00386 12 80 95 00 902 888 784 08 5792 9100 0844 800 544 0800 261 3302 General No 0870 900 9070 General National Rate No 0870 911 0036 8 800 500 69 70 0 07 pro Minute 0 06 Per minuut Par minute MecreH pasroBop Lokalni poziv Bezplatny hovor Lokalt opkald local paikallispuhelu 0 09 Par minute 0 09 pro Minute KAnon xwpic xpewon Ingyenes hivas free 0 08 Al minuto local local local Ortsgesprach Appel local 0 10 Per minuut
21. SB hard drive A PC with Internet access e An archive utility that supports the ZIP file format for example WinZip for Microsoft Windows or Stufflt for Macintosh Before updating Help check the current version installed on your TV If the version of Help on your TV is lower than the version available at http www philips com support download and install the latest Help file 1 Press A 2 Select Help then press OK On screen Help appears 3 Navigate to the last page of the section and note the version number e he version number is a 12 digit number where the last digit indicates the version of Help installed on your T V For example if the version onthe TV is 3139 137 03583 3 represents the version of Help currently installed 1 Insert the empty USB flash drive into a USB connector on your PC 2 On your PC create a folder called upgrades in the root directory of the USB flash drive 3 In your web browser navigate to http y 8 p www philips com support 4 Onthe Philips Support site find your product and locate the Help file for your TV set The Help file a upg file is compressed into a zip archive b Ifthe Help file on the Philips Support site Is a later version than the file in your T V click it to save the file to the USB flash drive 28 EN 6 Using the archive utility extract the zip file to the upgrades folder on the USB flash drive
22. Transmission Remote control Power Supported TV mounts Troubleshooting General TV issues TV channel issues Picture issues Sound issues HDMI connection issues Computer connection issues Contact us EN 38 38 2d 2d 40 41 21 42 42 42 qu 42 qu 43 44 44 44 44 45 45 45 45 English 1 Notice 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and surtability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs CAUTION RISK OF ELECTRIC SHOCK DO NOT
23. Welcome message 35 35 44 19 11 44 34 PHILIPS 2009 Koninklijke Philips Electronics N V All rights reserved
24. abled you can select Picture format gt Unscaled which provides maximum detail for display of PC content Light sensor Adjusts settings dynamically to match lighting conditions Picture format Changes the picture format Screen edges Changes the picture size Picture shift Adjusts the position of the picture Not applicable if selected picture format is Auto zoom or Wide screen Smart sound settings Use the Smart sound experience bar to access frequently used sound settings 1 Press A 2 Select Setup gt TV settings gt Sound gt Smart sound then press OK J Select one of the following settings e Personal Sets the TV to your personal preferences Standard Adjusts sound settings to suit most environments and types of audio News Applies sound settings ideally suited for spoken audio such as the news Movie Applies sound settings ideally sulted for movies Game Ideal settings for gaming Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 4 Press OK to confirm your choice D Press D to exit More sound settings 1 Press A 2 Select Setup gt TV settings gt Sound then press OK 3 Selecta setting to adjust e Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e Bass Adjusts the bass leve
25. ame Ideal settings for gaming e Energy saving The most energy conscious settings e Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos Custom Allows you to customise and store personal picture settings 20 EN 4 Press OK to confirm your choice Press O to exit More picture settings 1 Press f 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust e Smart picture Accesses pre defined smart picture settings e Reset Resets to factory default settings Contrast Adjusts the intensity of bright areas keeping dark areas unchanged Brightness Adjusts the intensity and details of dark areas Colour Adjusts colour saturation Hue Compensates colour variations in NTSC encoded transmissions e Sharpness Adjusts sharpness in the image Noise reduction Filters and reduces noise in an image e Tint Adjusts the colour balance in an image Custom tint Customises tint setting Pixel Plus HD Pixel Precise HD Accesses advanced settings including HD Natural Motion 100 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If en
26. arm clock page intendendly blank 7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start Note Different types of connectors may be used to connect a device to your TV depending on availability and your needs Back connector DIGITAL rceicves AUDIO OUT HDMI 1 HDMI 1 HDMI 1 DVIVGA ANTENNA VGA an esee 9 a 1 EXT 1 CVBS and RGB Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT I RGB CVBS OO OO OD OO 38 EN 2 DIGITAL AUDIO OUT Audio and video output to analogue devices such as another TV or a recording device DIGITAL AUDIO OUT 3 HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players HDMI Connections via DVI or VGA require an additional audio cable 4 AUDIO IN DVI and VGA Audio input from a computer 5 TV ANTENNA Signal input from an antenna cable or satellite 150 Ad TV ANTENNA 6 VGA Video input from a computer Side connector 1 COMMON INTERFACE Slot for a Conditional Access Module CAM 2 USB COMMON INTERFACE Data input from USB storage devices 3 HDMI Only for TVs 26 inches and larger Digital audio a
27. brightness level for the Clock LCD backlight if the TV is in On mode Set Off 1 2 3 4 5 Time Setting This is only available if the Time Download is set to Manual and can be used to set the clock with the remote control Set Time entry field xx xx Hr Time to be set by using arrow keys and numeric buttons Time Download Select source for clock time Automatic During cold start the Clock time is retrieved from the Download Program channel before displaying the tuned channel During a going to Standby cycle the clock time is updated as well Manual The clock time is set using the Time Setting option Country dependent During cold start the Clock time is retrieved from the Download Program channel before displaying the tuned channel and country dependent settings are made UTC LTO During a going to Standby cycle the clock time is updated as well Time Offset Offset time added to the downloaded clock time Slider 12to 12 hr Buzzer Volume Volume level of the Clock Time Alarm level Set Off Low High Feature settings Multi RC This function allows that up to four televisions can be installed in a room whereas every TV will listen to its own RC Once the TV is set also every RC can be set to remember its connected TV Off This function is not used all TVs will listen to a blue RC Blue The TV will listen to a blue RC Press and hold the blu
28. bstances such asalcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e o avoid deformations and colour fading wipe off water drops as soon as possible Disposal of your old product and batteries s Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol Is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EN B English 3 TV overview This section gives you an overview of commonly used TV controls and functions Please read section 3 to 6 to set the basic consumer menu first then follow the instructions in
29. curs contact Philips Consumer Care You forgot the code to unlock the TV lock feature Enter 8888 The TV menu is in the wrong language e Change the TV menu to your preferred language When turning the TV on off to standby you hear a creaking sound from the TV chassis e No action is required The creaking sound Is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance When TV start up time is slow e Select Fast mode in Low power standby menu 44 EN TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T or DVB C in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the T V source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving de
30. d VSecure Unprotect key s to erase Shared key Erase the Shared key Odd key Erase the Odd key Even key Erase the Even key All keys Erase the Shared Odd and Even keys Erase key option This function is erase the key that were selected by the Erase key option Action Press gt or OK to erase the key s settings the simultaneously working of the speakers and the headphone bathroom ker TV Speaker Enable Off The main speakers are muted The RC can control the volume and mute of the headphone bathroom speaker On The main speakers are active and the behavior of the headphone bathroom speaker is defined by the Independent Main Speaker Mute Independent Main Speaker Mute Off The RC volume and mute will control the main speakers and headphone bathroom speaker simultaneously On If the main speakers are muted by the RC the RC will control the volume of the headphone bathroom speaker Default Main Speaker Volume This option defines the volume level that will be set to the main speakers when the TV is unmated and the Independent Main Speaker Mute is set to On Factory default Restore the factory picture and sound setting Channel installation is not changed Channel Setup The Channel Setup function depends on the state of the PBS Mode Channel Configuration Channel setup Channel setup lt Action gt Press OK or gt Press OK Activate the channel set
31. d lock gt Parental rating A message appears prompting you to enter the child lock code EN 15 English J Enter the child lock code with the Numeric buttons 4 Select an age rating then press OK All programmes beyond the selected age rating are blocked Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock Set or change the child lock code Set or change the child lock code 1 In the child lock menu select Set code or Change code 2 Enter the code with the Numeric buttons Tip e If you forget your code enter 8888 to override any existing codes Use the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Note Please refer to page 31 Clock setup for more details of Pro clock settings Display the TV clock 1 When watching TV press EJ OPTIONS The TV option menu appears 2 Select Clock 3 Press OK 16 EN Note o disable the clock repeat the above procedure Change the clock mode 1 Press ft 2 Press Navigation buttons to select Setup gt TV settings Preferences gt Clock gt Auto clock mode J Press OK to enter the Auto clock mode menu 4 Press AY to select Automa
32. demarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world I DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Note Only applicable to TVs supporting MPEG4 HD standard All other registered and unregistered trademarks are the property of their respective owners EN 3 English 2 Important Read and understand all instructions before you use your I V If damage is caused by failure to follow instructions the warranty does not apply Safety e Risk of electric shock or fire e Never expose the TV to rain or water Never place liquid containers such as vases near the T V If liquids are spilt on or into the TV disconnect the T V from the power outlet immediately Contact Philips Consumer Care to have the T V checked before use Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Risk of short circuit or fire Never expose the remot
33. e button for two seconds Green The TV will listen to a green RC Press and hold the green button for two seconds Yellow The TV will listen to a yellow RC Press and hold the yellow button for two seconds Red The TV will listen to a red RC Press and hold the red button for two seconds MyChoice With MyChoice it is possible to activate two channel rings RO when MyChoice PIN is valid and R1 if not Off Single channel map as configured during channel installation On Channel ring RO to be available to guest in case of valid PIN entered H1 if not ThemeTV With ThemeTV it is possible to activate a customizable UI to select upto 15 different themes that contains Channle references ThemeTV can be presented on the display by means of pressing the ThemeTV button on the RC or automatically after starting up the TV EN 33 English On Show ThemeTV on the display after pressing the ThemeTV button on the RC Off ThemeTV disabled Startup Show ThemeTV on startup and able to showd ThemeTV by pressing the TTV button on the RC VSecure VSecure is the hospitality content scrambling method used by the Philips Hospitality TVs With its internal VSecure Authorization key a VSecure Unprotect key can be generated If this VSecure Unprotect key is stored in the TV the TV is able to descramble protected content Loading the VSecure Unprotect key can be done by USB memory device or via DVB
34. e control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire e Risk of injury or damage to the TV 4 EN e Two people are required to lift and carry a V that weighs more than 25 kg When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the T V use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the T V and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing Injury to children e Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Educate children about the dangers of climbing on furniture to reach the TA Risk of overheating Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains
35. eptimer switches the T V to standby after a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press A 2 Select Setup gt TV settings gt Preferences gt Sleep timer The bar appears 3 Press Navigation buttons to set the sleep time The Sleep timer can be up to 180 minutes In steps of five minutes If set to zero minutes the Sleep timer is switched off 4 Press OK to activate the Sleep timer The TV switches to standby after the pre defined period of time Alarm On timer You can switch the TV to a specified channel at a specified time from standby or power on mode 1 Press f 2 Select Setup gt Preferences gt On timer 3 Press OK or B to enter the On timer menu Activate Selects the frequency to Off or Once or Daily e Time Sets the starting time to switch on the TV automatically e Programme no Selects the channel Press EXIT to exit p Note Select On timer gt Activate gt Off to disable On timer Refer to page 32 How to set the TV alarm for more details about T V alarm Use locks Parental rating Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings higher than your child s age Press TT 2 Select Setup gt Channel settings or Satellite settings gt Chil
36. ge English Francais Deutsch Italiano EE el Switch on settings 0 60 Slider 15 0 60 Slider 60 Welcome message Erase messages 1 amp 2 Control Settings Power settings Clock settings Time Download Automatic manual country dependent Download Program List RF channels Time Offset 12 0 12 Off Low High Feature settings Multi RC Off Blue Green Yellow Hed VSecure 0 000 Program Info Frequency Medium Service ID ONID NID TSID Symbol Rate Modulation key All 1 fErasekey Speaker settings TV Speaker Enable Off On EasyLink EasyLink autostart Independent Main Speaker Mute Off On Default Main Speaker Volume 0 60 Slider 15 Factory default Actions ooo poo 30 EN Cont d Layer 1 Channel setup Store Settings Smart Clone USB to TV TV to USB RF Download SW types Program Info Setup settings PBS Setup PBS Setup menu language Select menu language to be English French German or Italian PBS mode Enables disables the Professional mode On All settings in the Professional mode Setup menu are in effect Off The TV operates as a normal consumer TV Only if set to Off mode it is possible to enter install channels using Channel setup and make other TV specific settings i e brightness etc Room ID Entry field to store 4 character to identify Room ID Switch on settings Switch
37. ite is only available if the T V supports DVB S Press ft Select Setup gt Search for channels or Search for satellite then press OK 3 Follow the on screen instructions to complete the channel installation Once complete select Finish then press OK Tip Press LT to see the channel list Note During installation leave Settings unchanged unless your digital provider provides you with the specific values to enter When digital TV channels are found the list of installed channels may display empty channel numbers You can rename reorder or uninstall these channels Access DVB C or DVB T channels If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network 1 while watching T V press A 2 Select Setup gt Channel settings 3 Select Channel installation gt Antenna or Cable DVB EN 23 English 4 Select one of the following settings Antenna DVB T Access free to air antenna or digital DVB T channels Cable Access cable or digital DVB C channels J Press OK to confirm your choice 4 Press D to exit The I V switches to the selected channel list Access DVB S channels for certain models only If your satellite is connected to the SAT connector you can receive satellite channels Press gt Watch satellite to watch satellite channels Instal
38. l e Treble Adjusts the treble level e Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e Balance Adjusts the balance of the left and right speakers to best suit your listening position Reset to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 Press f 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset back to the factory default Start a TV demo Start a demo to find out more about your TV s features 1 Press f Select Setup gt Watch demos then press OK 2 3 Selecta demo then press OK 4 Press D to exit the demo EN 21 English Change channel settings Reorder channels After installation you may want to reorder the channel list to suit your preference While watching TV press QA Select Channel list then press OK In the channel list press E2 Select Reorder then press OK Select the channel to reorder move it to the desired location then press OK gv ine cepe Select Insert to insert the channel into the desired location Swap to swap location with another channel or Cancel to cancel the reorder 7 Press OK to activate Rename channel After installation y
39. l analogue channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note e Skip this step if your system settings are correct 1 while watching T V press f 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation gt System then press OK 3 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 Inthe Analogue Manual installation menu select Find channel then press OK 2 Press e he Navigation buttons or Numeric buttons to manually enter the channel frequency 24 EN e he Navigation buttons to select Search Press OK to automatically search for the next channel J When the correct channel frequency is entered select Done then press OK 4 Select Store current channel to store the fine tuned channel as the current channel number or select Store as new channel to store it as a new channel number Install digital channels You can reposition your antenna to improve the reception You need to know the correct frequency to tune For best results contact the service provider or get a professional installer 1 Press A 2 Select Setup gt Channel settings gt Channel installation gt Digital Reception test gt Search then press OK Press the Numeric buttons to enter the channel frequency
40. l lock Off X All buttons on Guest remote control will function normally On X All buttons on the Guest remote control are disabled It is still possible to enter the PBS Setup menu by pressing 3 1 9 7 5 3 E MUTE EN 31 English OSD display Set this function to show or hide screen information Off Screen information is suppressed On Normal screen information is displayed High security Off Professional mode setup menu can be accessed by both Guest remote control Press 3 1 9 7 5 3 MUTE and the Professional setup remote control On Professional mode setup menu can only be accessed by the Professional setup remote control Browse USB Enables disables the USB Browse icon to be presented in the Guest Menu On When set to On the TV will show the USB icon in the Home menu Off When set to Off the TV will hide the USB icon in the Home menu Auto scart Enables auto scart switching or break in in Professional mode Off X Disables auto scart switching or break in On Enables auto scart switching or break in Easylink break in Enables or disables HDMI CEC standby feature in Professional mode Off Not able to switch on the TV by external HDMI CEC devices On Able to switch on the TV by external HDMI CEC devices Easylink control Enables or disables HDMI CEC one touch play feature in Professional mode Off Disables TV functio
41. list is currently selected 1 In the channel list press E2 2 Select Select list gt Favourites to display channels in a favourite list or All to display all channels J Press OK to confirm your choice Use EPG Overview The Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre e Set reminders when programmes start e Set up preferred EPG channels Note e EPG is not available in all countries Switch on EPG 1 Press LT 2 Select Programme guide then press OK EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options Depending on the broadcast service these options are available only for seven or eight days 1 When in EPG press 2 Press the Navigation buttons and OK to select and adjust one of the following settings Set reminder Sets programme reminders Clear reminder Clears programme reminders Change day Sets the EPG day Select Today Next day or Previous day More info Views programme information e Search by genre Searches T V programmes by genre Scheduled reminders Lists programmes reminders Update Programme guide Updates the latest programme information Use timers Sleep timer Sle
42. ly insert the CAM into the COMMON INTERFACE at the side of the TV 3 Push the CAM in as far as it will go 4 Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services COMMON INTERFACE Access CAM services 1 After inserting and activating the CAM press TT 2 Press Navigation buttons to select Common interface L gt Applications provided by the digital TV service operator appear on the screen Note e This menu option is available only if the CAM is inserted and activated correctly Use Philips EasyLink Your TV supports Philips EasyLink which enables one touch play and one touch standby between EasyLink compliant devices Note Compliant devices must be connected to your TV via HDMI Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press f 2 Press Navigation buttons to select Setup gt TV settings gt EasyLink 3 Select On or Off Use one touch play 1 After enabling EasyLink press play on your device tL The TV automatically switches to the correct source Use one touch standby 1 Press and hold OStandby on the TV s or device s remote control for at least three seconds L The TV and all connected HDMI devices switch to standby Use a Kensington
43. nality to control external HDMI CEC devices On Enables TV functionality to control external HDMI CEC devices Auto USB Enables or disables USB break in feature in Professional mode Off When USB device is plugged in the Multimedia menu will not appear automatically but users can access Multimedia menu from the Guest menu On When USB device is plugged in the Multimedia menu appears automatically 32 EN Enable Cl slot Enables or disables the use of the integrated Cl slot Off No TV input via the CI Slot Card is possible On No TV input via the Cl Slot Card is possible Enable Teletext Enables or disables the use of Teletext OSD on pressing Teletext button Off No Teletext services available Prison Mode On Teletext services available Enable MHEG Enables or disables the use of MHEG OSD on pressing MHEG button Off No MHEG services available Prison Mode On MHEG services available Enable EPG Enables or disables the use of EPG OSD on pressing EPG button Off No EPG Now Next Services available Prison Mode On EPG Now Next Services available Enable Subtitles Enables or disables the use of subtitles in a DVB broadcast channel Off No subtitles services available Prison Mode On Subtitles services available Power settings Power on The power on function allows the TV to enter a specific mode On Standby or Las
44. nd video input from high definition digital devices such as Blu ray players HDMI e Blu ray Disc Connect a computer Before you connect a computer to the TV e Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following connectors Note Connections via DVI or VGA require an additional audio cable HDMI cable o EN 39 English e DVI HDMI cable For TV of size 22 inch PC IN AUDIO For TV of size 26 inch and larger AUDIO IN LEFT RIGHT HDMI 1 DVI e HDMI cable and HDMI DVI adaptor For TV of size 22 inch PC IN AUDIO For TV of size 26 inch and larger AUDIO IN LEFT RIGHT HDMI DVI e VGA cable For TV of size 22 inch only PC IN AUDIO 40 EN Use a Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels Note e f required refer to documentation from your operator on how to insert a smart card into the Conditional Access Module Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your T V 1 Switch off the TV 2 Following the directions printed on the CAM gent
45. nel update Automatic update To set the TV to update digital TV channels automatically leave the TV in standby mode Once a day the TV updates earlier found channels and stores new channels Empty channels are removed from the channel list If a channel update is performed a message appears at startup If you do not want this message to appear 1 Press A 2 Select Setup gt Channel settings or Satellite settings gt Channel installation gt Channel update message gt Off then press OK e o disable automatic updates In the Channel installation menu select Automatic channel update gt Off Select audio language If the TV channel has multiple or dual sound broadcast you can select the preferred audio language 1 While watching TV press e Audio language Select the audio language for digital channels e Duall ll Select the audio language foranalogue channels Select video stream for DVB S channel only If available you can view different video stream of the channel depending on broadcast service provider 1 Press 2 Select Video selection to view the various selections Install channels Automatic install When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and install all available T V channels Note e Search for satell
46. ngs EN 17 English e Stop Stops playback Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos Listen to digital radio If digital broadcasting is available digital radio channels are installed automatically during installation 1 while watching TV press QA Select Channel list then press OK In the channel list press EJ DWN Select Select list gt Radio then press OK Select a radio channel then press OK n You can listen to satellite radio broadcast if available While watching TV press QA Select Channel list then press OK In the channel list press E2 Select TV Radio gt Radio then press OK AWN Use Scenea Activate Scenea You can use Scenea to display a picture as wallpaper on your TV Make sure that the location of your TV is set to Home mode 1 Press ft 2 Select Scenea then press OK The default or pre loaded picture is displayed e Ifthe sleep timer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your T V gt Use timers and locks gt Sleeptimer Page 24 Set a picture as Scenea Note he file size of the picture must not be more than 1 MB Connect the USB storage device to the TV Press fft Select Browse USB then press OK
47. ord or number to search 2 3 Press OK to begin the search 4 Press A until no word or number is highlighted to exit the search EN 13 English Use digital teletext Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels for example BBC When in digital teletext e Press the Navigation buttons to select or highlight items Use the Colour buttons to select an option then press OK to confirm or activate Digital text services are blocked when subtitles are broadcast and Subtitles are enabled Read Use more of your TV gt Use subtitles Page 29k Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 Is broadcast by a channel it is switched on by default To switch Teletext 2 5 on or off 1 Press f 2 Select Setup gt TV settings gt Preferences gt Text 2 5 gt On or Off then press OK Favourite channels Add or remove channels Press QQ Select Channel list then press OK Press E Select Mark as favourite or Unmark as favourite then press OK Bw MB 14 EN A star appears in the channel grid indicating that the channel is added to the favourite list The star disappears if you remove the channel from the favourite list Select a favourite list View only channels in a favourite list or view all channels if a favourite
48. ossible using the RF infrastructure This is covered by Philips Hospitality RF Download and allows a simultaneous upgrade of all installed televisions SW Types Defining the software parts to be upgraded SSB Firmware TV Firmware SSB NVM TV settings StandBy Firmware Firmware for the StandBy CPU Theme TV Supporting files for ThemeTV R1 png R15 png R1s png R15s png Background png Header png Footer png All All of above 36 EN Program Info This function is to set the necessary DVB parameters to locate the proper VSecure RF channel to load the VSecure RF Static or RF Dynamic key s Frequency Frequency of MUX 0706 Medium Cable or Antenna DVB T C Service ID JTgEH GE 00001 ONID Tg dg gd 00001 NID Tg gd 00001 TSID EG EE 00001 Symbol Rate 6 900 Modulation QAM16 QAM32 QAM64 QAM128 QAM256 Above parameters must match head end configuration Program Info To initiate RF Download just press OK or gt 6b Guest mode instruction Introduction When this television is configured as a professional television the guest is having no access to TV functionality that can influence TVs expected behavior The guest will not have access to menus that can change the channel configuration nor can he as example put the TV on a louder audio level then is permitted in the BDS Mode setting This section describes the functionality available
49. ou may want to rename channels to suit your preference While watching TV press QA Select Channel list then press OK In the channel list press G J Select Rename then press OK ad nt a In the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK gt Once complete press the Navigation buttons to select Done e To clear the entry select Clear To cancel select Cancel 7 Press OK to confirm your choice 8 Press D to exit Hide channels Hide channels from the channel list to prevent unauthorised access 22 EN While watching TV press QA Select Channel list then press OK In the channel list select the channel to hide press amp Select Hide channel then press OK The channel is hidden A WN Unhide channels While watching TV press QA Select Channel list then press OK In the channel list press E2 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed a a al a d Select the channel to unhide then press E 6 Select Unhide channel then press OK Repeat steps 5 and 6 to unhide other channels Update channel list When the TV was switched on for the first time a full installation of channels was performed You can set the TV to add or remove digital channels automatically You can also manually start the chan
50. ow Press the Navigation buttons to select a picture then press OK e o pause or stop playback press OK again e To jump to the previous or next file press 4 or P Press to exit content browser Press EJ to access or exit the following settings e Show info Displays the file information e Stop Stops slideshow Rotate Rotates the file Repeat Repeats the slideshow e Play once Plays the file once e Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e Slideshow speed Sets the display time for each picture in the slideshow Slideshow transition Sets the transition from one picture to the next e Set as Scenea Sets the selected picture as wallpaper on the TV Listen to music Press the Navigation buttons to select a music track then press OK e Press 4 gt to fast rewind or fast forward a track Press O to exit content browser Press EJ to access or exit the following settings e Stop Stops audio playback Repeat Repeats a song or an album Play once Plays the file once e Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK Press lt 4 or B to rewind or fast forward a file Press O to exit the content browser During video playback press 8 to access the following setti
51. pe Power e Mains power 220 240V 50Hz 60Hz e Standby power lt 0 3W e Ambient temperature 5 to 40 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 2 2 inches or 5 5cm from the back of the T V DN Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper T V mounting that results in accident injury or damage TV screen Required Required size inches pitch mm mounting bolts 2 100 x 100 Z xc va 26 100 x 200 6 x MA 22 200 x 200 4x MG EN 43 English 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control are correctly inserted according to the orientation e Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor lens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoc
52. plits the current channel or source to the left of the screen with teletext on the right e T O P overview Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers Enlarge Normal view For more comfortable reading you can enlarge the teletext page Press the Navigation buttons to move around the enlarged screen Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles Cycle subpages Cycles through subpages automatically if subpages are available e Language Switches to a different language group to display a language correctly when that language uses a different character set 3 Press E to exit the options menu Select a teletext language Some digital TV broadcasters have several teletext languages available You can set your primary and secondary language 1 Press f 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Primary Text or Secondary Text J Select your preferred teletext languages then press OK Select subpages A teletext page number can hold several subpages These subpages are shown on a bar next to the main page number When available on a teletext page press lt 4 or B to select subpages Search teletext 1 When in teletext press OK to highlight the first word or number Press the Navigation buttons to skip to the w
53. rsion of the current software is displayed TV USB update Before performing this procedure be sure to e Set aside some time to complete the entire update Have available a USB flash drive with at least 256 MB of storage space e Have access to a computer with a USB port and internet access 1 Press A 2 Select Setup gt Update software then press OK The update assistant starts Follow the on screen instructions to complete the update e e f you already have the upgrade file downloaded onto a USB flash drive connect it to the T V Then select Setup gt Software settings gt Local updates TV Internet update If your TV is connected to a router that is connected to the Internet you can update the TV software directly from the Internet You need a high speed Internet connection Press fft gt Setup gt Update now and press OK Select Internet and press OK Follow the instructions on screen When the update is done the TV switches off and back on again automatically Wait for the TV to switch back on do not use the Power switch on the T V If the T V is connected to the Internet the T V displays a message about the availability of new software at start up EN 27 English On screen Help Update Before updating the on screen Help ensure you have the following e An empty USB flash drive The USB flash drive must be FAT or DOS formatted Do not use a U
54. s G_ and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 Inthe Universal access menu press the yellow button to select Mixed volume 2 Pressthe Navigation buttons to move the slider up or down then press OK 3 Press O to exit Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 Inthe Universal access menu press the blue button to select Key beep 2 Pressthe green button to turn on audio feedback or press the red button to turn it off 3 Press O to exit EN 19 English 5 Set up the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching T V press ft 2 Select Setup gt Quick picture and sound settings then press OK J Select Start then press OK Follow the on screen instructions to choose your preferred settings Smart picture settings 1 Press A 2 Select Setup gt TV settings gt Picture gt Smart picture then press OK J Select one of the following settings e Personal Sets the TV to your personal preferences Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies G
55. s frequently used sound settings 1 Press A 2 Select Setup gt TV settings gt Sound gt Smart sound then press OK 3 Select one of the following settings Personal Sets the TV to your personal preferences EN 11 English 4 5 e Standard Adjusts sound settings to suit most environments and types of audio News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies Game Ideal settings for gaming Drama Applies sound settings ideally suited for drama Sports Applies sound settings ideally suited for sports Press OK to confirm your choice Press O to exit Change picture format Change the picture format to suit your viewing experience 1 2 3 Press ft Select Setup gt TV settings gt Picture gt Smart picture then press OK Select Picture format then press OK to confirm your choice The following picture formats can be selected Auto fill Automatically enlarges the picture to fill the screen Minimal picture distortion subtitles remain visible Not for PC input Auto zoom Automatically zooms the picture in to fill the screen as much as possible without distortion Black bars may be visible Not for PC input e Super zoom Removes the black bars on the sides of 4 3 broadcasts Not for HD or PC Movie expand 16 9 Scale
56. s the classic 4 3 format to 16 9 Not recommended for HD or PC Wide screen Stretches the classic 4 3 format to 16 9 EN e Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Note Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Add new device Before watching a connected device you must add it to the home menu e HDMI ARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu Connect and switch on the device Press ft Select Add your devices then press Wn OK Follow the on screen instructions Watch connected device 1 Press fr 2 Select the device from the home menu J Press OK to confirm your choice 4 Use more of your product Use Teletext Select a page 1 Press T 2 Select Text then press OK J Selecta page by e Entering the page number with the Numeric buttons e Pressing A or V to view the next or previous page e Pressing the Colour buttons to select a colour coded item A Press D to exit teletext Access teletext options 1 When in teletext press 8 2 Selectan Option Freeze page Unfreeze page Freezes or unfreezes the current page Dual screen Full screen Enables or disables dual screen teletext which s
57. t an item in the home menu then press OK to access the menu 3 To exit the home menu press amp 2 To start an activity select the desired item with the Navigation buttons then press OK Help Accesses the electronic user manual e Watch TV Switches back to the antenna source if another source is selected e Browse USB If a USB storage device is connected accesses the content browser e Scenea Switches to the Scenea wallpaper Add your devices Adds new devices to the home menu Note that you must add a new device to the home menu in order to access it e Setup Accesses menus that allow you to change picture sound and other TV settings Browse The browse menu gives you easy access to Electronic programme guide e TV channel list Teletext To access the browse menu while watching TV press QA 1 Press the Navigation buttons to select an Item e Programme guide Accesses the Electronic Programme Guide e Channel list Accesses the T V channel list Text Accesses teletext 2 Press OK to confirm your choice Channel list The channel list displays the T V channels and possible radio stations installed on your T V 1 while watching TV press QA Select Channel list then press OK 2 J Selecta channel then press OK to access the channel 4 Press O to exit the channel list without changing the channel Add your devices After you connect a device
58. t status of operation when the mains power is activated cold start On The TV will always turn on show startup channel after the mains power is activated Standby When set the TV will always turn to standby status as defined in Low power standby option after the mains power is activated Low power standby The Low power standby option defines the TV to enter a specific standby mode after pressing the On Off button on the remote control To wake up the TV both On Off button on the RC or TV can be pressed Fast The TV will quickly turn on show startup channel This mode is having more power consumption then the Green mode Green The TV will slower turn on show startup channel then the Fast This mode is having less power consumption then the Fast mode Smart power The power consumption for the Smart power mode is defined by the Standard Smart Picture setting in the TV Setup part Off The TV will start with Standard Smart Picture setting but the setting can be changed in the guest setup mode On The TV will start with Standard Smart Picture setting and Smart Picture setup is not selectable in the guest setup mode with this the power consumption mode is predictable ng less power consumption then the Fast mode Clock settings Display Standby Defines the brightness level for the Clock LCD backlight if the TV is in Standby mode Set Off 1 2 3 4 5 Display On Defines the
59. tall and operate this TV in Professional mode Before reading this section please also read section 3 to set the basic functionality of this TV Benefits of Professional mode This TV is specially designed to operate in Professional Mode Professional Mode offers the following benefits Access to the TV Setup Menu can be blocked This prevents users e g guests from deleting or changing channel settings and or modifying picture and sound PHILIPS settings This ensures that TVs are always set up correctly e A switch on volume and channel can be selected After switching on the TV b will always start on the specified To enter the Professional Setup menu volume level and channel e The maximum volume level of the TV e press RCS Setup can be limited in order to prevent e press Home Menu disturbance to other guest Channels can be blanked Video only On a Guest remote e The TV local buttons VOLUME press 3 1 9 7 5 3 amp MUTE P CH and ft Home can be locked Note e Screen information can be suppressed e SETUP mode should be selected for hotel installer EN 29 Professional mode options This paragraph describes the functionality of each item in the Professional mode setup menu Enter the next layer by pressing OK or gt Return to a previous level by pressing lt Navigate in the current layer by pressing or v PBS Setup PBS Setup menu langua
60. text languages with a broadcast Set preferred languages when multiple languages are available Press AV or V to fine tune the channel When the correct channel frequency is selected select Done and then press 1 Press f 2 Select Setup gt Channel settings or Satellite settings Language J Select one of the following settings then press OK Primary audio Secondary audio Selects the available audio language for digital channels Primary subtitles Secondary subtitles Selects the available subtitle language for digital channels Primary Text Secondary Text Selects the available teletext for digital channels Hearing impaired Enables or disables hearing impaired subtitles e Visually impaired UK only Selects the device for audio output e Volume Visually impaired UK only Adjusts the volume of the visually impaired audio Preferred audio format Select Standard to receive standard audio format MPEG Select Advanced to receive advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo Select Mono or Stereo if stereo broadcasting is available 4 Press D to exit Tip Set a secondary language in the same menu You receive this language if the primary language is unavailable Menu language 1 while watching T V press ft 2 Select Setup gt TV settings gt Preferences gt Menu language
61. tic Manual or Country dependent 5 Press OK to confirm Use Daylight saving Press fff 1 2 Press Navigation buttons to select Setup gt Preferences gt Clock gt Daylight saving Press OK to enter Daylight saving pure Press AV to select Standard time or Daylight saving time Ea Press OK to enable your selection Note his option is only available if you select Auto clock gt Country dependent Use subtitles On analogue channels 1 Switch the TV to an analogue T V channel 2 Press LT then select Text and press OK J Enter the three number page number of the subtitles page usually 888 4 Press D to exit teletext Subtitles display if available Subtitle language This feature is only supported on selected digital channels 1 While watching TV press 8 2 Select Subtitles 3 Select a subtitle language from the list then press OK Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device You can access the USB content browser using one of the following methods When watching TV connect the USB device to the USB port on the side of your T V 1 Press A 2 Select Browse USB then press OK View slidesh
62. uch play one touch standby F factory settings 46 EN 15 15 23 26 44 35 37 46 16 41 44 47 33 42 44 43 43 35 43 43 21 H HDMI HDMI CEC in Troubleshooting Hearing impaired home mode Installation K Kensington lock L Language Troubleshooting Lock Kensington lock Local KB lock RC lock M MENU Professional mode setup menu Troubleshooting multimedia Multimedia Technical specifications Multi remote control MyChoice O One touch play One touch standby Option menu 35 47 25 27 43 46 43 34 34 30 46 17 44 36 37 43 43 10 P picture format picture setting picture settings POWER Technical specifications Professional mode Activate Options PBS mode Store settings R Remote control Multi remote control Professional Setup Remote control RC lock Remote control usage Technical specifications Troubleshooting Rename channel Reorder channels gt Safety Scenea Selectable AV Shop mode Skip scrambled signals Sleep timer Smart card Smart picture Smart power Smart sound sound settings Store T Technical specifications Teletext Troubleshooting TV overview 12 20 20 10 44 30 31 33 37 36 29 34 44 46 22 22 18 36 27 36 15 42 20 33 21 21 37 44 8 13 46 U Universal access Remote control USB Enable USB USB break in V Video formats Visually impaired Volum W Wall mounts
63. up menu item by pressing OK or gt and the installed channels will be displayed in a Channel Grid Press the RC6 GUEST key on the Professional Setup RC to put this into TV Setup mode Press the OPTIONS key on the Professional Setup RC to option the options display The following options can be selected Rename Reorder Show hidden channels Hide channel Blank channels MyChoice setup ThemeTV setup Rename Rename the current selected channel Reorder Change the order of the current channel to be presented in the Chanel Grid Navigate to the channel to be adjusted e Press OK e Move the current channel to the preferred location using the arrow keys e Press OK to accept Insert Channel will be inserted in the Channel Grid order Swap Both selected channels will swap their location in the Channel Grid order e Make next changes or press Options key to exit Show hidden channels Presents the hidden channels in the Channel Grid as blanks These blank channels can NOT be selected by Channel number or P P If activated new a second level for Options is available Exit Cancel operation Unhide All Make all channels visual again Blank Channels The Blank channels function disables the display of video on the TV but does not affect the audio output This function can be used for audio applications example music only channels and so on which do not necessarily require the display of video
64. ure is displayed try switching the source from one device to another and back again e fthere are intermittent sound disruptions check that output settings from the HDMI device are correct e Ifa HDMI to DVI adaptor or HDMI to DVI cable is used check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack only Computer connection issues The computer display on the TV is not stable e Check that a supported resolution and refresh rate is selected on the computer e Set the TV picture format to unscaled Contact us If you cannot resolve your problem refer to the FAQs for this product at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in the warranty leaflet Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty e Make a note of your T V model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 45 English Index A age rating Alarm ALARM audio language Audio lip sync B Batteries Blue mute C Channel list PayT V channel Troubleshooting clock Computer Connect display resolutions Troubleshooting Consumer setup D Digital channels CAM Display resolutions E EasyLink disable Enable HDMI CEC in one to
65. vices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect e Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is a picture but sound quality is poor Note f no audio signal is detected the TV automatically mutes the audio output this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to O e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly S L There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognize the HDMI device and no pict

Philips 22HFL4372D 22" HD-Ready 3D compatibility Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 22HFL4372D 22&quot; HD-Ready 3D compatibility Black

Contents

Download Pdf Manuals

Related Search

Related Contents

Philips 22HFL4372D 22" HD-Ready 3D compatibility Black