Chief SLB145 mounting kit
Contents
1. or implied regarding the information contained herein Milestone assumes no responsibility for accuracy completeness or sufficiency of the information contained in this document ms Chief Manufacturing a products division of Milestone AV Technologies 8850 000134 Rev01 iC ae l f 8401 Eagle Creek Parkway Savage MN 55378 2009 Milestone AV Technologies P 800 582 6480 952 894 6280 F 877 894 6918 952 894 6918 a Duchossois Group Company Our Mounts Your Vision 05 092. AMAGE TO EQUIPMENT DO NOT over tighten screws when installing interface bracket NOTE Step 1 is only required when installing an SLB SSB interface bracket If an SLM SSM bracket is being installed proceed to step 2 Screw thumb screws onto 10 24 x 5 8 Phillips pan head screws DO NOT fully tighten thumb screws at this time Turn projector upside down on a flat surface Place interface bracket onto bottom of projector and align bracket with the threaded inserts in projector Using M4 x 8mm Phillips pan head screws and flat washers secure interface bracket to projector and tighten all fasteners at this time NOTE Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the All Points Security Kit 2 3 4 Chief is a registered trademark of Milestone AV Technologies All rights reserved aw Nee wv Ir M consumer Milestone AV Technologies and its affiliated corporations and subsidiaries collectively Milestone intend to make this manual accurate and complete However Milestone makes no claim that the information contained herein covers all details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind Milestone makes no representation of warranty expressed
3. INSTALLATION INSTRUCTIONS SSB 145 SSM 145 SLB 145 and SLM 145 Interface Brackets SSB 145 SSM 145 SLB 145 and SLM 145 Interface Brackets are designed for use with Chief Series Projector Mounts See the specific installation instructions provided with the mount for additional installation information Unpack carton and verify kit contents If any listed parts are missing immediately contact a Chief Customer Service representative WARNING IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT DO NOT substitute hardware Use only hardware supplied by manufacturer 1 Interface Bracket 4 Washer Flat M4 6 10 24 Thumb Nuts 4 Screw Phillips Pan Head Machine M4 x 8mm 1 All Points Security Kit Towards front of Towards front of projector projector SLB 145 SLM 145 Note SSB style interface bracket connections Note SSM style interface bracket connections are encircled are encircled Only used when installing SLB SSB interface brackets NOTE Specific to SSB style and SSM style interface bracket installation all appropriate screws come pre installed as reflected in the encircled locations above DO NOT attempt to substitute and USE ONLY this pre installed hardware for SSB style and SSM style interface bracket installation Installation Instructions WARNING OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND D
Download Pdf Manuals
Related Search