Jamo 883K4
Contents
1. speaker is playing remove the grill install the supplied non curing glue strips at locations C fig 1 and reinstall the grill Hookup The receiver amplifier must be turned OFF before you connect the speaker or it may cause dam age to the amplifier Connect the speaker wires from the receiver amplifier to the speakers When connecting the speaker wires make sure that LEFT L is connected to LEFT L RIGHT R to RIGHT R POSITIVE to POSITIVE and NEGATIVE to NEGATIVE If terminals are color coded RED is POSI TIVE and BLACK is NEGATIVE Adjustments The tweeter can be tilted towards the listening area due to high frequencies being more directional than low frequencies The impedance of the speaker and the level of the tweeter are adjustable IMPEDANCE Located on the crossover on the back The factory setting is 8 ohm If the receiver amplifier specifies a minimum impedance of 4 ohm the speaker may be switched to the 4 ohm position This will make the speaker play louder When installing more then 1 pair of speakers to a receiver amplifier 80 4 special care should be taken to impedance matching the speakers to the Q 40 receiver amplifier This may require impedance matching devices Con sult your dealer for information regarding impedance matching TWEETER LEVEL Located on the front baffle The factory setting is 0 dB The level of the tweeter can be lowered by 3 or 6 dB to suite individual t2. In Wall speakers WARNING Improper installation of the speaker could result in amplifier damage Read all instructions before installation Jamno Lets get personal Placement Make certain the speaker is located between wall studs to avoid cutting into studs Place the supplied template a minimum of 5 8 from any studs Level it and draw a line around it to mark the cutout Take care when cutting the hole to avoid cutting into pipes or electrical conduits If you encounter pipes electrical conduits or other obstacles you may have to select another location for the speaker Installation First install the frame Loosen screws A fig 1 by turning them counter clockwise Loosen all 4 screws until the Dog ears B fig 2 can move freely Do not remove the screws Install the frame into the wall and level it notice TWEETER and WOOFER markings on the frame Turn screws A clockwise until they are tightened and the frame is firmly installed Next install the speaker into the frame Before installing the speaker connect the speaker wires as described under Hookup and set the impedance switch to the desired position see Adjustments Remove the grill from the speaker Place the speaker into the frame and secure with the 6 screws supplied Before reinstalling the grill on the speaker make tweeter level adjustments as described under Adjustments Reinstall the grill If the grill has a loose fit and or is vibrating when the
3. astes in different 3 room environments Experiment with the settings to find the preferred sound 6 Custom painting The grill and frame may be painted to match your decor Paint the grill and frame separately before mounting to the wall After painting the grill blow air through the holes to prevent clogging The speaker is supplied with a sheet of acoustically transparent foam This may be inserted behind the grill so the holes look less dark Maintenance All Jamo loudspeakers are made of modern thoroughly tested materials which will usually require no maintenance other then dusting or drying with a soft dry cloth If the loudspeakers have become greasy the grease may be removed by moistening the cloth with water and possible using a mild detergent NOTE Never use any scouring powder household cleansers or any other solvents for cleaning the loudspeaker Fig 1 Fig 2 The scope of the warranty The warranty period will come into force as from the purchase date stated on the invoice The warranty will apply for the following period of time e 2years for electronics power supply amplifier etc 7 years for other parts cabinet speaker units etc In case of warranty inquiries please contact your dealer In case of request for service under warranty please enclose your original receipt Defects covered by the warranty Except for the defects stated below the warranty covers any production and material defects of
4. the product Defects not covered by the warranty Defects arising from accidents misuse normal wear and tear mis maintenance voltage variation overloading stroke of lightning and other force majeure events Defects arising from incorrect installation or operation Defects arising from modification repair attempt of repair by a non authorised service centre Defects arising from the use of non original spare parts Defects on products with altered or lacking series number e Other defects due to conditions or circumstances beyond the supplier s control Transportation costs for servicing are not covered by the warranty The supplier is liable only to repair or replace defective parts or products A replacement cannot exceed the value of the product under warranty 69446 39 2000
Download Pdf Manuals
Related Search