Miele DA 399-5 Ext
Contents
1. 26 Technical data Total connected load 220 W Fan motor 120W Hob lighting 2x50W VONAGE be eee etes AC 230 V FEegUereyo e 50 Hz FuseratingGB 3A AUS NZ Pl g rating IIIA 10A Test marks Electrical safety P C Tick Mark Electrically suppressed according to AS NZS 1044 Electrical cable length 1 5m Weight DA 9906 Lett quet xt ege 21 6 kg DA 399 2 0 000 eee 24 6 kg Fan performance Extraction power according to EN 61591 Extraction system 2 150 mm Level li cess Rete 150 m3 h Level ll cuin eR 250 m h evelli u u eek SX east 350 m h Intensive level 500 m3 h Extraction system 2 125 mm Level I esee 130 m3 h vellus uz uy uya oas 230 m h Level 2 ote rmi 330 m h Intensive level 450 m h Unrestricted 550 m h Recirculation with charcoal filter Level u ond ance uyu e aD 100 m h Level a esses 150 m3 h Level Il lisse sess 250 m3 h Intensive level 350 m3 h Optional extra for recirculation mode Conversion Kit DUW 20 Miele Active Charcoal Filter DKF 12 1 27 United Kingdom Miele Co Ltd Fairacres Marcham Road Abingdon Oxon OX14 1TW Tel 0845 365 0555 Fax 0845 365 0777 Customer Contact Centre Tel 0845 365 6600 E mail info miele co uk Internet www miele co uk Australia Miele Australia Pty Ltd A2. air is to be ducted into a vent flue the ducting must be directed in the flow direction of the flue Connection for air extraction Important If the exhaust ducting is to run through rooms ceiling space etc where there may be great variations in temperature between the different areas the problem of condensation will need to be addressed The exhaust ducting will need to be suitably insulated Condensate trap optional extra dai1585 In addition to insulating the exhaust ducting we recommend that a suitable condensate trap is also installed to collect and evaporate any condensate which may occur Condensate traps are available for 2 125 mm or 150 mm ducting When installing a condensate trap ensure that it is positioned vertically and if possible directly above the exhaust connection The arrow on the housing indicates the direction of air flow 25 After Sales Service In the event of a fault which you cannot correct yourself or if the appliance is under guarantee please contact Your Miele Dealer Chartered Agent or The Miele Customer Contact Centre see back cover for address When contacting your Dealer or Miele please quote the model and serial number of your appliance These are shown on the data plate which is visible when the grease filter is removed For G B Please note that telephone calls may be monitored and recorded for training purposes
3. ge cete eed a e 22 PrOlecHVe TOll x 3 aus Stat dea eO Pasce es asal ede nU Q 0 Sus vat bul ta edo 22 KUINUA IIIA IAA AAA 22 Electrical connection 23 Connection for air extraction 24 Condensate taD cs UAP EDO MALALE UA MEUS bebe teed teg s 25 After Sales Service 26 Technical data IIIA eee Ea 27 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled Packaging e g cling film polystyrene and plastic wrappings must be kept out of the reach of babies and young children Danger of suffocation Dispose of or recycle all packaging materials safely as soon as possible Disposal of your old appliance Electrical and electronic appliances often contain materials which if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment They are however essential for the correct functioning of your appliance Please do not therefore dispose of it with your household waste Please dispose of it at your local community waste collection recycling centre or contact your dealer for advice Ensure that it presents no danger to children while being stored for disposal It should be unplugged or disconnec
4. otherwise condensation may collect in the hood which could cause corrosion P When cooking with oil or fat chip pans and deep fat fryers etc do not leave the pans unattended Never leave an open grill unattended when grilling Overheated oil and fat can ignite and could set the cooker hood on fire P Do not use the cooker hood without the filters in place This way you will avoid the risk of grease and dirt getting into the appliance and hindering its smooth operation P The filters should be regularly cleaned or changed as appropriate Saturated filters are a fire hazard See Cleaning and care P Do not use a steam cleaner to clean this appliance Pressurised steam could reach the electrical components and cause a short circuit Correct installation P Refer to the cooker or hob manufacturer s instructions as to whether a cooker hood may be operated above the cooker hob P The minimum safety distances between the top of the cooker or hob and the bottom of the cooker hood given in the Appliance dimensions section of this booklet must be maintained unless the hob manufacturer states that a greater safety distance is required If more than one cooking appliance is fitted beneath the cooker hood and they have different minimum safety distances to the cooker hood select the greater distance Warning and Safety instructions P Safety regulations prohibit the fitting of a cooker hood over solid f
5. 0 mm or 125 mm with reducing collar Appliance dimensions Safety distance between hob and cooker hood S When planning the installation height of your cooker hood the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood are as follows unless a greater distance is specified by the manufacturer of your cooking appliance 450 mm GB 600 mm AU NZ above electric hobs and cookers 650 mm above an open grill or deep fat fryer 650 mm above gas hobs and cookers If this cooker hood is installed above a Miele Wok CS 1028 CombiSet appliance a minimum safety distance of 760 mm must be maintained between the burner and the lower edge of the cooker hood See Warning and Safety instructions for further information When deciding on the safety distance between the hob and cooker hood please note that a distance of 650 mm above electric cookers hobs may be preferable to give more working space under the hood Account should also be taken of the height of the person who will be using the hood most often The person should have sufficient space to work comfortably at the hob and also be able to reach the hood controls with ease Please be aware that if positioned too high extraction will be inefficient Installation Assembly parts gt Se Sum eff AD E Installation 3 protective sheets for use when
6. BN 96 005 635 398 1 Gilbert Park Drive Knoxfield VIC 3180 Tel 03 9764 7130 Fax 03 9764 7149 Internet www miele com au China Miele Shanghai Suite 4105 06 Plaza 66 1266 Nanjing Road West Jing An District Shanghai 200040 PRC Tel 86 21 6288 4200 Fax 86 21 6288 4100 E mail mieleshanghai cn miele com Internet www miele cn Hong Kong Miele Hong Kong Limited AIA Plaza 24 Floor 18 Hysan Avenue Causeway Bay Tel 852 2610 1331 Fax 852 2610 1013 E mail mielehk miele com hk Internet www miele hk India Miele Appliances India Pvt Ltd Ground Floor Copia Corporate Suites Plot No 9 Jasola New Delhi 110025 Tel 011 46 900 000 Fax 011 46 900 001 E mail customercare miele in Internet www miele in Ireland Miele Ireland Ltd Broomhill Road Tallaght Dublin 24 Tel 01 461 0710 Fax 01 461 07 97 E Mail info miele ie Internet www miele ie New Zealand Miele New Zealand Limited Unit L 10 20 Sylvia Park Road Mt Wellington 1060 Auckland NZ Tel 0800 264 353 Fax 0800 463 453 Internet www miele co nz Singapore Miele Southeast Asia Miele Pte Ltd 163 Penang Road 04 02 03 Winsland House Il Singapore 238463 Tel 65 6735 1191 Fax 65 6735 1161 E Mail infosea miele com sg nternet www miele sg South Africa iele Pty Ltd 63 Peter Place Bryanston 2194 P O Box 69434 Bryanston 2021 Tel 27 0 11 548 1900 Fax 27 0 11 548 1935 E mail inf
7. Miele Operating and installation instructions Cooker hood DA 396 DA 399 To avoid the risk of accidents en GB AU NZ or damage to this appliance it is essential to read these instructions before it is installed and used for the first time M Nr 06 417 570 Contents Caringfortheenvironment 3 Warning and Safety instructions 4 Guide to the appliance 10 Modesofoperation 12 Cleaning and care 13 WAUA resserrer aaae aa WA IA KI sae eee aa 13 General notes 13 BI aa tA AA IAA AA 13 Important for appliances with stainless steel housing 13 Important for appliances with lacquered housing 14 Grease Illes u u aces cave EE EC e A eee CPI Re bala eee IER 14 Fitting and replacing the charcoalfilter 16 Changingahalogenlamp 17 Appliance dimensions 18 Safety distance between hob and cooker hood S 19 Installation IIIA ERE un rx YE EE eed Rd 20 Assembly parts i cac xs red Ever RE Ras reg d be iya ee ex i 20 Iiistall amp tion IPstt lo HOTIS cud acp RN eoe Cay yu Ces saw e
8. cking clips are facing down towards the hob dait619 If the grease filters are inadvertently replaced upside down insert a small screwdriver blade into the slits to disengage the clip Cleaning and care Fitting and replacing the charcoal filter If the cooker hood is connected for recirculation a charcoal filter must be inserted in addition to the grease filters Itis designed to absorb cooking odours and is fitted in the canopy above the grease filters New filters can be purchased from your Miele Dealer Chartered Agent or from the Miele Spare Parts Department See back cover for contact details and Technical data for the model number of the filter m Before fitting or replacing a charcoal filter the grease filters must first be taken out see previous section for instructions on how to do this m Take the charcoal filter out of its packaging dai1630 m Fit the charcoal filter into the bracket Replace the charcoal filter when it no longer absorbs kitchen odours effectively It should however be replaced at least every 6 months Used charcoal filters can be disposed of with the normal household waste 16 Cleaning and care Changing a halogen lamp Before any cleaning or maintenance work disconnect the cooker hood from the mains supply Ensure that itis switched off at the wall socket and the plug is withdrawn or the fuse is with
9. ctrician The manufacturer cannot be held liable for the consequences of an inadequate earthing system e g electric shock P gt For safety reasons this appliance may only be used when it has been fully installed P Only open the housing as described in the instructions given in the installation sheet and in the Cleaning and care section of this booklet Under no circumstances should any other parts of the housing be opened Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults P Installation maintenance and repairs may only be carried out by a Miele authorised person in accordance with current national and local safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held liable for unauthorised work P Faulty components must only be replaced by genuine Miele original parts The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used P During installation maintenance and repair work the appliance must be disconnected from the mains electricity supply It is only completely isolated from the electricity supply when itis switched off at the isolator or the screw out fuse is removed in countries where this is applicable or the mains fuse is disconnected or it is switched off at the wall socket and t
10. drawn from the fused spur connection unit or the mains fuse is withdrawn or the screw out fuse is removed in countries where this is applicable Exercise caution when changing halogen lamps They get very hot during use and remain hot for some time after being switched off Do not touch the surface directly when changing a lamp as grease particles from your fingers will adhere to the surface and damage it Please follow the manufacturer s instructions m First remove the grease filters from the cooker hood gf cC m nn ane dai1634 m Now turn the thumb screw anti clockwise This releases the halogen lamp partially from its housing dai1635 m Turn the halogen lamp anti clockwise and pull it downwards to remove Replace with a halogen lamp of the same specification GU GZ 10 230 V 50 W m Fit the new halogen lamp by reversing the above procedure m Replace the grease filters Appliance dimensions i l l l l 860 T af og di LE DA 399 18 4 2 Extraction Recirculation 3 Ventilation grille position for recirculation 4 and 5 5 is not required for recirculation mode cooker hoods The shaded area represents the wall or ceiling area for the vent cut out and for fitting the connection socket For recirculation mode only a connection socket needs to be fitted Connection for air extraction 15
11. e controls They will not understand the potential dangers posed by it They should be supervised whenever you are working in the kitchen P Older children may use the cooker hood only when its operation has been clearly explained to them and they are able to use it safely recognising the dangers of misuse P Please be aware that on cooker hoods with halogen lighting the lamps will get very hot during use and remain hot for some time after switching off To safeguard against burning keep children well away from the lamps at all times Technical safety P Before installation check the cooker hood for visible signs of damage Under no circumstances should you use a damaged appliance A damaged appliance is dangerous Warning and Safety instructions P Before connecting the appliance to the mains supply make sure that the voltage and frequency details given on the data plate correspond with the on site electricity supply otherwise the appliance could be damaged Consult a qualified electrician if in any doubt gt gt The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system which complies with current local and national safety regulations It is most important that this basic safety requirement is present and tested regularly and where there is any doubt the household wiring system should be inspected by a qualified ele
12. e same room The cooker hood should be installed according to local and national building regulations Seek approval from the building inspector where necessary All ducting pipework and fittings must be of non flammable materials The exhaust ducting should be as short and straight as possible To ensure efficient air extraction the diameter of the exhaust ducting should not be less than 150 mm If exhaust ducting with a diameter of less than 150 mm or if flat ducting is used the noise level of the cooker hood will increase and extraction will be less efficient Only reduce the diameter of the ducting if absolutely necessary e g where narrower ducting has already been installed Only use wide radius bends Tight bends reduce the air throughput of the cooker hood Only use smooth pipes or flexible hoses made from non flammable materials for extraction connection 24 If the exhaust ducting is secured to the exhaust stub by a hose clip ensure that it is fitted correctly Do not overtighten Otherwise the exhaust stub could buckle and the non return flap could become jammed 2 8 s s Where ducting is horizontal it must be laid to slope away at at least 1 cm per metre This is to ensure that condensate cannot drain back into the cooker hood If the exhaust air is to be ducted into the open air the installation of a telescopic wall vent is recommended f the exhaust
13. elect the Intensive Setting IS It is advisable to run the fan for a few minutes after cooking is finished to neutralise any lingering odours in the air whether you are using air extraction or recirculation mode To switch the fan off slide the switch to position O Modes of operation The cooker hood works with air extraction quw The air is drawn in and cleaned by the grease filters and directed outside If the on site ventilation system does not have a non return flap the non return flap supplied with the appliance must be fitted in the exhaust socket in the motor unit Having a non return flap fitted in the ducting ensures that air once ducted to the outside cannot get back into the room again The flap is closed when the cooker hood is switched off When the cooker hood is switched on the non return flap opens for the cooking vapours to be ducted away 12 air recirculation available as an optional extra with a conversion kit and charcoal filter see Technical Data qw The air is drawn in and cleaned first by the grease filters and then by a charcoal filter The cleaned air is then recirculated back into the kitchen through grilles in the top of the cooker hood extension piece Before using the cooker hood in recirculation mode ensure that the charcoal filter is in place See Cleaning and care Cleaning and care Before any cleaning or maintenance Work
14. fitting the tower 2 hose clips for securing the exhaust ducting 3 1 reducing collar for exhaust ducting 2 125 mm 1 non return valve for fitting into the exhaust socket on the motor unit for extraction mode only Upper retaining plate for securing the extension piece Middle retaining plate for securing the extension piece Lower retaining plate for securing the appliance unit Conversion kit for recirculation mode including directional unit and flexible aluminium hose this is not included but is available as an optional extra see Technical Data Installation instructions A map Q 7 screws 5 x 40 mm anq 7 x S 8 plugs for securing the retaining plates to the wall The screws and plugs are designed for use in solid walls For other types of wall construction alternative suitable fixings will be required Make sure the wall is strong enough to bear the weight of the cooker hood 2 x M6 self tapping nuts for securing the appliance Om 2 screws 3 9 x 7 5 mm for securing the tower 1 hexagonal Allen key for adjusting the appliance height Ex 1 lever for removing the tower 21 Installation Before installation it is important to read the information given on the following pages as well as the Appliance dimensions and the Warning and Safety instructions at the beginning of this book This is particularly crucial when using the cooker hood at the
15. he plug withdrawn or the fuse from the fused spur connection unit is withdrawn Warning and Safety instructions P Do not connect the appliance to the mains electricity supply by a multi socket unit or an extension lead These do not guarantee the required safety of the appliance e g danger of overheating P This appliance may only be used in mobile installations such as ships caravans aircraft etc if a risk assessment of the installation has been carried out by a suitably qualified engineer P In areas which may be subject to infestation by cockroaches or other vermin pay particular attention to keeping the appliance and its surroundings in a clean condition at all times Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee Using at the same time as other heating appliances that depend on the air from the room Warning danger of toxic fumes A Lc t cd A188 0000 IH HHHH HH HH I5 HHHH P Great care should be taken when using the cooker hood at the same time and in the same room or area of the house as another heating appliance which depends on the air in the room Such appliances include gas oil wood or coal fired boilers and heaters continuous flow or other water heaters gas hobs cookers or ovens which draw air in from t
16. he room and duct exhaust gases out through a chimney or extraction ducting When used in extraction mode the appliance draws air in from the room in which it is installed and from neighbouring rooms If there is insufficient air an underpressure will occur The heating appliance may be starved of oxygen impairing combustion Harmful gases could be drawn out of the chimney or extraction ducting back into the room with potentially fatal consequences Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously an underpressure of 0 04 mbar 4 pa is the maximum permissible in the room dai1477 Ventilation can be maintained by air inlets which must not be blocked in windows doors and outside wall vents or by other technical measures such as ensuring that the cooker hood can only be switched on when the heating appliance is switched off or vice versa A ventilation brick alone is not generally sufficient to ensure safe ventilation The overall ventilation condition of the dwelling must be taken into account If in any doubt the advice of a competent builder or for gas a qualified gas fitter Corgi registered in the UK must be sought If the only way of ensuring adequate ventilation is
17. ilters release the catch on the filter lower the filter 45 unhook it at the back and remove it To avoid damaging the filter or the hob below make sure you hold the filter securely at all times when handling it Cleaning and care Cleaning the grease filters by hand m Clean the filters with a soft nylon brush in a mild solution of hot water and a small amount of washing up liquid Do not use undiluted washing up liquid Do not use cleaning agents containing descaling agents powder cleaners cream cleaners or abrasive all purpose cleaning agents oven sprays Cleaning the grease filters in the dishwasher m Place the filters as upright as possible in the lower basket with the short sides upright and wash on a 65 C programme ensuring the spray arm is not obstructed If a Miele dishwasher is being used select the Sensor wash programme m Use a mild dishwasher detergent Depending on the cleaning agent used cleaning the filters in a dishwasher can cause permanent discolouration to the surface However this will not affect the functioning of the filters in any way m After cleaning leave the filters to dry on an absorbent surface before replacing them When removing the filters for cleaning also clean off any residues of oil or fat from the now accessible housing to prevent the risk of these catching fire When putting the grease filters back in position ensure that the lo
18. is carried out disconnect the cooker hood from the mains supply Ensure that itis switched off at the wall socket and the plug is withdrawn or the fuse is withdrawn from the fused spur connection unit or the mains fuse is withdrawn or the screw out fuse is removed in countries where this is applicable A range of Miele branded cleaning and conditioning agents are available to order through your Miele Dealer Chartered Agent the Miele Spare Parts Department or via the internet on www miele shop com Housing General notes The surfaces and controls are susceptible to scratches and abrasions Please observe the following cleaning instructions m All external surfaces and controls can be cleaned with warm water and a small amount of washing up liquid applied with a well wrung out soft sponge or cloth m Wipe the surfaces dry using a soft cloth Do not use too much water when cleaning the controls Water could penetrate into the electronics and cause damage E Cloth m A microfibre E Cloth is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel glass plastic and chrome without the use of chemicals Avoid cleaning agents containing soda acids chlorides or solvents abrasive cleaning agents e g powder cleaners or cream cleaners and abrasive sponges as well as pot scourers or sponges which have been used p
19. ntee the required safety of the appliance The connection data is given on the data plate This is visible when the grease filters have been removed Ensure that this data matches the household mains supply If the switch is not accessible after installation depending on country an additional means of disconnection must be provided for all poles For extra safety it is advisable to protect the appliance with a suitable residual current device RCD Contact a qualified electrician for advice Important This appliance is supplied for connection to an a c 230 V single phase 50 Hz supply The wires in the mains lead are coloured in accordance with the following code Green yellow earth Blue neutral Brown live WARNING THIS APPLIANCE MUST BE EARTHED Connection of this appliance should be made via a suitable isolator or a double pole fused spur connection unit which complies with national and local safety regulations and the On Off switch should be easily accessible after the appliance has been built in When switched off there must be an all pole contact gap of 3 mm in the switch including switch fuses and relays according to EN 60335 23 Connection for air extraction N Important To avoid the danger of toxic fumes please observe the Warning and Safety instructions This is especially crucial when using the cooker hood at the same time as another heating appliance which relies on air from th
20. oQmiele co za nternet www miele co za United Arab Emirates Miele Appliances Ltd P O Box 11 47 82 Gold amp Diamond Park Sheikh Zayed Road Building 6 Offices Nos 6 214 to 6 220 Dubai Tel 971 4 341 84 44 Fax 4971 4 341 88 52 E Mail infoQmiele ae Internet www miele ae Alteration rights reserved 4209 C M Nr 06 417 570 10
21. reviously with abrasive cleaning agents These will damage the surface material Important for appliances with stainless steel housing This infomation does not apply to the controls Stainless steel surfaces can be cleaned using the Miele E Cloth or with a proprietary non abrasive cleaning agent designed specifically for use on stainless steel To help prevent re soiling proprietary conditioning agents for stainless steel can also be used Apply sparingly with an even pressure in the direction of the grain Cleaning and care Important for appliances with lacguered housing special finish Itis very difficult to clean this type of surface without causing minor marks to the surface material This can become particularly noticeable with darker colours and if there is halogen lighting in the kitchen Controls The controls may suffer discolouration or damage if soiling is left on them for too long Remove soiling straight away Observe the General notes on cleaning earlier in this section Do not use stainless steel cleaning agents on the controls Grease filters Re usable metal filters are fitted which remove solid particles oil dust etc from the kitchen vapours preventing soiling of the cooker hood To avoid the build up of grease the grease filters should be cleaned every 3 4 weeks An oversaturated filter is a fire hazard 14 dai1667 m To take out the grease f
22. same time as a heating appliance that relies on oxygen from the same room which could result in the build up of toxic fumes Installation instructions See enclosed Installation sheet for instructions on how to install this appliance Protective foil on stainless steel appliances The housing components have protective foil around them to prevent them being damaged during transport m Please remove this foil before fitting the housing components It can be peeled off easily 22 Dismantling Should the appliance ever need to be dismantled follow the installation instructions in reverse order as described on the installation sheet A lever is supplied to assist with the removal of the tower s m After loosening the fixing screws on the tower push the lever between the tower and the extension piece to lever the tower out of its fixings dai0920 Electrical connection All electrical work should be undertaken by a suitably gualified and competent person in strict accordance with current national and local safety regulations BS 7671 in the UK Installation repairs and other work by unqualified persons could be dangerous for which the manufacturer cannot be held liable Ensure power is not supplied to the appliance until after installation or repair work has been carried out Do not connect the appliance to the mains electricity supply by an extension lead These do not guara
23. ted from the mains electricity supply by a competent person Warning and Safety instructions This appliance complies with all relevant local and national safety reguirements Inappropriate use can however lead to personal injury and damage to property To avoid the risk of accidents and damage to the appliance please read these instructions carefully before using it for the first time They contain important information on the safety installation use and maintenance of the appliance Keep these instructions in a safe place and ensure that all users are familiar with the contents Pass them on to any future owner of the appliance Correct application P This appliance is intended for domestic use only Any other usage is at the owner s risk and could be dangerous The manufacturer cannot be held liable for damage resulting from incorrect or improper use or operation P This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience or knowledge unless they are supervised whilst using it or have been given instruction concerning its use by a person responsible for their safety Safety with children P This appliance is only intended for use by adults who have read these instructions P This appliance is not a toy To avoid the risk of injury keep children well away and do not allow them to play with it or to use th
24. uel stoves P All ducting pipework and fittings must be of non flammable material These can be obtained from the Miele Spare Parts department or from builders merchants P The appliance must not be connected to a chimney or vent flue which is in use Neither should it be connected to ducting which ventilates rooms with fireplaces gt If exhaust air is to be extracted into a chimney or ventilation duct no longer used for other purposes seek professional advice Accessories P Only use genuine Miele spare parts and accessories with this appliance If spare parts or accessories from other manufacturers are used this will invalidate the guarantee and Miele cannot accept liability The manufacturer cannot be held liable for damage caused by non compliance with these Warning and Safety instructions Guide to the appliance Guide to the appliance Extension piece Tower Canopy Control panel Grease filter Recirculation grille only for recirculation mode Hob lighting Charcoal filter special accessory for recirculation mode Hob lighting switch Sliding switch for the fan To switch on slide the switch to the required setting Depending on the intensity of the cooking vapours levels 1 to 3 are usually sufficient for normal cooking For short periods of intensive cooking vapours e g when searing meat you may wish to s
25. via an open window then a window contact switch should be fitted The window contact switch ensures that the cooker hood can only operate when the window is opened sufficiently The cooker hood simply needs a conversion kit to operate via the window contact switch The conversion kit is available from the Miele Spare Parts Department Take care when ventilating the room through an open window that ventilation is not impaired by a closed blind or curtain If the hood is being operated in recirculation mode the above restrictions do not apply If in any doubt the advice of a qualified builder gas fitter Corgi registered in the UK or electrician must be sought Warning and Safety instructions Correct use D gt Never use an open flame beneath the cooker hood To avoid the danger of fire do not flambe or grill over an open flame When switched on the cooker hood could draw flames into the filter Fat particles drawn into the cooker hood present a fire hazard P When using the cooker hood over a gas hob ensure that any burners in use are always covered by a pan Switch the cooking zone off when a pan is removed even for a short time Regulate the flame so that it does not burn up the sides of the pan Do not allow the pans to overheat excessively e g when using a wok The cooker hood can become damaged when exposed to excessive heat P Always switch the cooker hood on when a cooking zone is in use
Download Pdf Manuals
Related Search