Philips 19HFL3232D 19" HD-Ready 3D compatibility Black
Contents
1. 1 Press f MENU 2 Press AYP to select Setup gt Features gt Sleep timer L gt The Sleep timer menu appears J Press lt P to select a value between zero and 180 minutes L gt The sleep timer can be set in steps of five minutes If set to zero the sleep timer is switched off 4 Press OK to switch on the sleep timer L gt TheTV switches to standby after the specified time Automatically switch the TV on on timer You can switch the TV to a specified channel at a specified time from standby or power on mode 1 Press MENU 2 Press AYP to select Setup gt Features gt On timer J Press to enter the On timer menu Activate Selects how often the TV is switched on Time Sets the time to switch on the TV Programme no Selects the channel or the connected device 4 Press EXIT to exit Tip Select On timer gt Activate gt Off to disable this feature Use TV locks You can prevent your children from watching certain programmes or channels by locking the TV controls Set or change your PIN code 1 Press f MENU 2 Press AYP to select Setup gt Features gt Set code Change code L gt The Set code Change code menu appears J Enter your code using the Numeric buttons Follow the on screen instructions to create or change your PIN code Tip f you forget your code enter 8888 to override any exi2. Add a channel to a favourite list Tip View all channels before adding a channel to a favourite list UJ N EN When watching TV press OK L gt The channel grid appears Press AY4b to select a channel to add to a favourite list Press OPTIONS L gt The channel options menu appears Select Mark as favourite then press OK L gt The channel is added to the favourite list Note All favourite channels are marked by an asterisk in the channel grid Remove a channel from a favourite list 1 when watching TV press OK L gt The channel grid appears 2 Press AY 4b to select a channel to remove J Press OPTIONS 4 Select Unmark as favourite then press OK L gt The channel is removed Use the Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre Switch on EPG 1 When watching TV press QOGUIDE Ly The EPG planner screen appears displaying information about the scheduled programmes e EPG data is available only in selected countries and can take some time to load Ea Press QA GUIDE to switch between EPG and channel grid Use EPG 1 when watching TV press QO GUIDE L The EPG planner screen appears 2 Pres OPTIONS L gt The program guide menu
3. R1 List of all available channels Unmark MyChoice channels to prevent users from watching full MyChoice channels via Guest remote control Note All non MyChoice channels are listed in R1 Before pressing authorized PIN code R1 is the default channel list everytime you start the TV mains power Store settings In the Professional setup menu select Store gt Confirm to save the changes Note Restarts the TV mains power for the changes to take effect 40 EN 8 Connect devices This section describes how to connect devices with different connectors Examples are provided in the Quick Start Note You can use different types of connectors to connect a device to your T V Back connector EXT 1 RGB CVBS 750 ar CULO OOOO TV ANTENNA J 1 HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players HDMI I Connections via DVI or VGA require an additional audio cable O EXT 2 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DV players or game consoles 3 TV ANTENNA Signal input from an antenna cable or satellite BA r TV ANTENNA EN 41 English a EXT 1 CVBS and RGB Analogue audio and video input from analogue or digital devices such as DVD player
4. Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world 1 DOLBY DIGITAL PLUS Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Note Available in selected models only HIGH DEFINITION MULTIMEDIA INTERFACE HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC All other registered and unregistered trademarks are the property of their respective owners EN English 2 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Never insert objects into the ventilation slots or other openings on the TV When th
5. The channel grid allows you to view all available channels in a grid format a v Z See e Se phere 1 Press OK L gt The channel grid appears 2 Press AV 4b to browse the channel grid 3 Press OK to select a channel Watch connected devices Note Switch on the device before selecting it as a source on the T V Use the AV button 1 Press AV L gt The source list appears Press AY to select a device WN Press OK to confirm your choice L gt The TV switches to the selected device Adjust TV volume To increase or decrease volume Press lt 4 To mute or unmute sound e Press K to mute the sound e Press K again to restore the sound Use teletext 1 Press TELETEXT L gt The main index page appears 2 selecta page as follows Press the Numeric buttons to enter a page number Press P to view the next or previous page Press the Colour buttons to select a colour coded item 3 Press TELETEXT to exit teletext EN 11 English 5 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 Press t MENU L gt The menu screen appears r Add new device A IL _ Setup atch TV ba 2 Press AYP to select and navigate through one of the followi
6. EN 5 English ECO Green Available in selected models only EUROPEAN UNION ECOLABEL x x x Y y Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 e High energy efficiency e Low standby power Designed to facilitate recycling Philips continuously focuses on lowering the environmental impact of its innovative consumer products We aim our efforts towards environmental improvements during manufacturing reduction of harmful substances energy efficient use end of life instructions and product recycling Thanks to our environmental effort this TV has been awarded the European Ecolabel the flower www ecolabel eu You can find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV on the Philips website for your country at www philips com This TV has features that contribute to energy efficient use This TV was awarded the European Ecolabel for its environmental qualities Energy efficiency features Energy saving The energy saving setting of the TV combines several TV settings that result in saving energy See the smart settings in the setup menu e Low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby func
7. If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and colour fading wipe off water drops as soon as possible Disposal of your old product and batteries ae Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health K Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health
8. mode Enable USB Off Disables USB multimedia function in Professional mode Software update functions normally On USB meltimedia functions normally in Professional mode Note Refer to page 21 View photos and play music from a USB storage device for more details about USB meltimedia function Blue mute Sets the background colour when there is no signal on TV Off The backgroud colour is set to black On The background color is set to blue Digit timeout Defines the time interval between numeric buttons when users press digits on the remote control The duration is from 0 5 to 9 9 seconds When digit is pressed the timer refreshes 38 EN Selectable AV Allows the installer to define which external sources to be displayed on the source list when pressing AV button on the Guest remote control Only the sources marked with PX appear in the source list Speaker settings TV speaker enable Off Disables the TV speaker The headphone volume functions normally On The TV speaker is enabled Default setting Independent main speaker mute This option only appears when you select TV speaker enable gt On Off Press MUTE or lt 4 on the Guest remote control will affect both the TV speaker and the headphone volume Default setting On Press K MUTE on the Guest remote control will affect the TV speaker volume only The hea
9. 60Hz 1280 x 1024 60 Hz 1360 x 768 60Hz Video formats e Resolution refresh rate 480i 60Hz 480p 60Hz 576i 50Hz e 576p 50Hz 720p 50Hz 60Hz e 1080i 50Hz 60Hz e 1080p 24Hz 25Hz 30Hz 50Hz 60Hz Multimedia e Supported storage device USB Only FAT or FAT 32 USB storage devices are supported e Supported multimedia file formats Images JPEG Audio MP3 Note Multimedia file names must not exceed 128 characters 48 EN Tuner Reception Transmission Aerial input 75ohm coaxial IEC75 DVB DVB Terrestrial DVB T MPEG4 TV system DVB COFDM 2K 8K PAL I B G D K SECAM B G D K L L e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF Remote control e Type 22AV1104B 10 e Batteries 2 x AAA LRO3 type Power e Mains power 220 240V 50 60Hz Standby power lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount To prevent damage to cables and connectors be sure to leave a clearance of at least 2 2 inches or 5 5cm from the back of the TV VY Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage TV screen Required Requ
10. On to display subtitles always or On during mute to display subtitles only when audio is muted 3 Press OK to enable subtitles Select a subtitle language on digital TV channels Note When you select a subtitle language on a digital TV channel as described below the preferred subtitle language set in the installation menu is temporarily overruled Press f MENU Press AY4b to select Setup gt Features gt Subtitle language Press OK or gt to enter the list of available languages Press AY to select a subtitle language UA UC N Press OK to confirm Tip You can also access the Subtitle language menu while watching TV by pressing OPTIONS gt Subtitle language EN 23 English View photos and play music from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Use the USB connector to view photos or listen to music stored on a USB storage device 1 Tumon the TV 2 Connect the USB storage device to the TV L gt The home menu appears Press AY4b to select Browse USB 3 4 Press OK to confirm L gt The USB thumbnail browser appears Tip Press QA GUIDE to switch between thumbnail and file browsing views View photos 1 Inthe USB browser press to enter the Picture folder 2 Press AYP to select a photo
11. Press AY to select Store as new channel to store the new channel under a new channel number 8 Press OK to enter Store as new channel then press OK 9 Press 4 to return to the Channel installation menu Step 3 Fine tune analogue channels 1 Press MENU 2 Press AVP to select Setup gt Installation gt Channel installation gt Analogue manual install L gt The Analogue manual install menu appears Press AY to select Fine tune then press gt to enter Press AY to adjust frequency Press OK to confirm Press AY to select Store current channel to store the channel number Press to enter Store current channel then press OK COO N AUA W Press 4 to return to the Channel installation menu EN 29 English Rename channels You can rename channels The name appears when you select the channel 1 when watching TV press OK to display the channel grid 2 Select the channel to rename J Press OPTIONS L gt The channel options menu appears 4 Press AY to select Rename channel then press OK L gt A text input box appears Press AY 4b to select characters Press OK to confirm each character Select Done then press OK to finish renaming channels Now Tip Press Aa to change an uppercase letter to a lowercase letter and vice versa Rearrange channels After you install channels you can rearrange the order in which they appear 1 W
12. available This chapter provides instructions on how to re install and fine tune channels Automatically install channels This section describes how to search and store channels automatically Step 1 Select your menu language 1 Press ft MENU 2 Press AVP to select Setup gt Installation gt Language gt Menu language Press OK or to enter Menu language Press OK to confirm 3 4 Press AY to selecta language 5 6 Press 4 to return to Installation menu Step 2 Select your country Select the country where you are installing the TV The available channels for the country are installed on the TV 1 Press ft MENU 2 Press AYP to select Setup gt Installation gt Channel installation gt Automatic channel search J Press OK or to enter the menu L gt The country menu appears 4 Press AY to select your country Press OK to confirm your choice L gt The channel installation guide appears on the screen 28 EN Step 3 Install channels Automatically installs the available analogue and digital TV channels and digital radio channels 1 From the channel installation guide screen select Full installation 2 Press OK to confirm L gt TheTV starts to search and store all the available channels 3 When installation is complete press OK to exit the installation menu Update the channel list You can enable automatic update of channels when you
13. but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices e Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device If the TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again e fthere are intermittent sound disruptions check that output settings from the HDMI device are correct e fyou use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO mini jack only Computer connection issues The computer display on the TV is not stable Check that your PC uses the supported resolution and refresh rate e Set the TV picture format to unscaled Contact us If you cannot resolve your problem refer to the FAQs for this product at www philips com support If the problem remains unresolved contact Philips Consumer Care in your country as listed in the Addendum Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Note Make a note of your T V model and serial
14. number before you contact Philips These numbers are printed on the back of the TV and on the packaging EN 51 English 11 Index A Analogue 29 Fine tune 29 ANTENNA 41 B Batteries 5 48 Blue mute 38 C CAM 45 Channel list Channel decoder 27 favourite 18 Grid 10 Install 28 Automatic 28 Manual 29 MyChoice channel 40 Rearrange 30 Rename 30 Test digital reception 30 Troubleshooting 50 Update 28 Clock 20 Computer Connect 44 Display resolutions 48 Connector HDMI 41 43 Overview 41 USB 43 Consumer setup 35 Country 28 D Decoder 27 Demo 27 Digital channels CAM 45 Test digital reception 30 52 EN E EasyLink Disable 46 Enable 46 HDMI CEC in 37 One touch play 46 One touch standby 46 System audio control 46 ECO Green 6 EPG 19 E sticker 27 F Factory settings 27 H HDMI Connect devices 41 HDMI CEC in Sf Troubleshooting 51 Home mode 26 l Install channels Automatic 28 Manual 29 K Kensington lock 47 L Language Audio language 16 Menu language 28 Subtitle language 23 Troubleshooting 50 Lock Kensington lock 47 Local KB lock 37 Lock channel 22 RC lock 37 TV lock 22 M MENU Main menu 12 Professional mode setup menu 32 Teletext 17 Multimedia Product information 48 USB 24 Multi remote control 39 Music 25 Mute 11 MyChoice 39 40 O OAD 26 One touch play 46 One touch standby 46 On timer 21 P Photo Slide show 24 USB 24 Picture format 15 P
15. on it will play at the specified volume level Last status If On is selected the TV will be automatically switched to the last volume status whenever the mains power is turned on The volume level can not exceed the Maximum volume level User defined Only appears when you select Last status gt Off The guest can adjust his her preferred switch on volume level Switch on channel When the guest switches the TV on it will play at the specified channel 36 EN Last status If On is selected the TV will be automatically switched to the last channel status whenever the mains power is turned on User defined Only appears when you select Last status gt Off The guest can choose his her preferred switch on channel Welcome message The Welcome message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on This helps to personalize the hotel experience for guests The Welcome message can consist of 2 lines of text with each line containing a maximum of 20 alphanumeric characters Use A V lt P on the remote control to compose the Welcome message Note Welcome message is always disabled if you select Control settings gt OSD display gt Off Display message Selects On to activate the welcome message Line 1 Sets the characters of the first line message Line 2 Sets the characters of the second line mes
16. or a photo album J Press OK to view a full screen image of the photo Tip e When in full screen mode press lt P to move between photos 24 EN View a slide show of your photos 1 When a full screen image of a photo is displayed press OK L gt A slide show begins from the selected photo 2 Press the following buttons to control the slide show OK to pause the slide show lt P to go back or move forward to the next image EXIT to stop the slide show Change slide show settings 1 when viewing a slide show press OPTIONS L gt The slide show options menu appears 2 Press AY to select one of the following Start Slideshow Stop Slideshow Starts or stops a slide show Slideshow transitions Sets the transition from one picture to the next Slideshow frequency Sets the amount of time that a picture is shown e Rotate image Rotates a picture Show info Displays the picture name date size and next picture in the slide show UJ Press OK to confirm your setting Note Rotate image and Show info appear only when you press OK to pause the slideshow Listen to music 1 In the USB thumbnail browser view select Music and press gt to enter Press QJ GUIDE to switch between thumbnail and file browsing views 2 Press AY 4b to select a music track or album J Press OK to play the selected music Button Function OK Pause
17. the TV Risk of overheating Never install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Risk of injury fire or power cord damage e Never place the TV or any objects on the power cord e To disconnect the TV power cord easily from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage e Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays
18. 19HFL3232D 10 22HFL3232D 10 26HFL3232D 10 pHILIPS EN User manual PHILIPS Country Austria Belgium Croatia Czech Republic Denmark Finland France Germany Greece Hungary reland taly Luxembourg Netherlands Norway Poland Portugal Slovakia Slovenia Spain Sweden Switzerland UK Telephone number 0810000206 078250851 0800222782 800142100 35258761 0922901908 0821611658 01803386853 0080031221223 0680018544 016011161 0840320041 026843000 09000400063 22708250 0223491505 0800780902 0800004551 080080255 902888785 086320016 0223102116 02079490069 This information is correct at the time of press For updated information see www philips com support Contents Notice 2 Important 4 Your TV 7 Side controls and indicators 7 Remote control 8 Use your TV 10 Switch your TV on off or to standby 10 Switch channels 10 Watch connected devices 11 Adjust TV volume 11 Use teletext 11 Use more of your TV 12 Access TV menus 12 Rename devices from the home menu 12 Remove devices from the home menu 13 Change picture and sound settings 13 Use the universal access menu 17 Use advanced teletext features 17 Create and use list of favourite channels 18 Use the Electronic Programme Guide 19 Use the TV clock 20 Use timers 21 Use TV locks 21 Use subtitles 23 View photos and play music from a USB storage device 24 Listen to digital radio channels 25 Update the TV sof
19. appears Press AY4b to select an option and then press OK to confirm Press EXIT to exit the EPG menu KR UC Note Only the channels in the Preferred EPG channels list appear in the EPG menu Use the EPG options menu Use the EPG options menu to set or clear reminders change day and access other useful EPG options 1 Press QOGUIDE 2 Press OPTIONS tL The EPG menu appears J Press AY to select one of the following options Show info Displays programme information Search by genre Searches TV programmes by genre Press OK to enter or activate the option Press BACK to exit the EPG menu ma Tip Press QA GUIDE to switch between EPG and channel grid EN 19 English Use the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Set the TV clock manually In some countries you need to set TV clock manually 1 Press amp MENU 2 Select Setup gt Features gt Clock Ly The Clock menu appears J Press AVP to enter time 4 Select Done to confirm D Press amp MENU to exit Note f your selected country supports digital broadcast the clock displays the time data from your TV service operator as priority Display the TV clock 1 when watching TV press amp OPTIONS L gt TheTV option menu appears Select Clock Pre
20. ast is available e Mono Stereo Selects mono or stereo if stereo broadcast is available TV speakers Turns TV speakers on or off Available only when you switch on Easylink Surround Enables spatial sound Headphone volume Adjusts headphone volume Auto volume levelling Automatically reduces sudden volume changes for example when switching channels e Delta volume Levels out volume differences between channels or connected devices Switch to the connected device before you change the delta volume SPDIF output Selects the type of digital audio output PCM Converts non PCM audio to PCM audio e Multichannel Outputs audio to the home theater Use the universal access menu You can activate the universal access menu during the first installation Once enabled you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices Tip You can also enable the universal access menu by selecting Setup gt Installation gt Preferences gt Universal access gt On 1 When watching TV press amp OPTIONS Ly The TV options menu appears 2 Select Universal access then press OK or gt to enter 3 Press lt P to select one of the following options and press OK to enter Hearing impaired Enables or disables hearing impaired subtitles Visually impaired Selects speaker headphone or both for Volume vi
21. broadcasts Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers T O P teletext is not broadcast on all TV channels 1 Press MHEG TELETEXT L The teletext screen appears 2 Press INFO Ly The T O P overview appears Press amp lt 4P to select a subject 3 4 Press OK to view the page Create and use list of favourite channels You can create a list of your preferred TV channels so that you can find those channels easily Select a favourite list 1 When watching TV press OK to display the channel grid 2 Press OPTIONS L gt The channel options menu appears J Press AY to select Select list then press OK to enter L The channel list options appear 4 Select Favourite then press OK Only channels in the favourite list appear in the channel grid Note The favourite channel grid is empty until you add channels into the favourite lists 18 EN View all channels You can exit a favourite list and view all installed channels 1 When watching TV press OK L gt The channel grid appears 2 Press OPTIONS KR Ww L gt The channel options menu appears Press AY to select Select list then press OK or gt to enter Select AIl then press OK All channels are displayed in the channel grid Note All favourite channels are marked by an asterisk when you view the channel grid
22. ce L gt The selected smart sound setting is applied Manually adjust sound settings 1 Press f MENU 2 Press AVP to select Setup gt Sound L gt The Sound menu appears J Press AVP to select the following settings Smart sound Accesses pre defined smart sound settings e Bass Adjusts the bass level e Treble Adjusts the treble level e Digital audio lipsync Enables or disables lipsync audio output When this is enabled the TV synchronises the audio and video performance When disabled you need to adjust the lipsync audio feature on the external device that is connected to the TV Only available with SPDIF connection Volume Adjusts the volume e Volume visually impaired Adjusts the volume of visually impaired audio when your current channel supports visually impaired function Applies for UK only 16 EN Selects Setup gt Installation gt Language gt Visually imparied gt Off to disable Volume visually impaired Visually impaired Audio Descriptor Sets the mix of visually impaired audio with regular audio When available visually impaired audio includes audio descriptions of on screen action Balance Adjusts the balance of the right and left speakers Audio language Available for digital channels when multiple languages are broadcast Lists available audio languages e Duall II Selects audio languages if dual sound broadc
23. dphone volume functions normally Note e Ifthe TV speaker is muted independently press z4 on the Guest remote control will only affect the headphone volume Default main speaker volume Only appears when you select Independent main speaker mute gt On Users can set the TV speaker and headphone volume to a certain level as the default setting This option can avoid sudden high volume when TV speaker is turned on again from independently mute Installation Blank channel The Blank channel function disables the display of video on the TV but does not affect the audio output This function can be used for audio applications example music only channels and so on which do not necessarily require the display of video 1 Enters the Blank channel the list of all channels appear 2 Selects one or more channels and press OK to mark J The channels marked with X will not display video on the TV Disable auto updating Software Disables automatic TV software update via OAD On the air software download Channel Disables automatic channel installation when new channels are detected Both Disables automatic update of the TV software and the channel installation Off Enables automatic update of the TV software and the channel installation Skip scrambled signals Off Allows scrambled channels in the channel list On Skips the scrambled channels in th
24. e Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note he EasyLink compliant device must be switched on and selected as the source Philips does not guarantee 100 interoperability with all HDMI CEC devices EasyLink features One touch play When you connect your TV to devices that support one touch play you can control your TV and the devices with one remote control One touch standby When you connect your TV to devices that support standby you can use your TV remote control to put your TV and all connected HDMI devices in standby mode System audio control When you connect your TV to HDMI CEC compliant devices your TV can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your TV You can use the remote control from the connected device to adjust the volume Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it Press f MENU 1 2 Press ava to select Setup gt Installation gt Preferences gt EasyLink J Select On or Off 46 EN Use one touch play 1 After enabling EasyLink press play on your device L gt The TV automaticall
25. e TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire Never expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire EN Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Never place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over the edge of the surface Never place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support Educate children about the dangers of climbing on furniture to reach
26. e channel list Multi remote control Guest remote control supports up to four televisions operating in one room without interference from each other s remote controls Each TV and the Guest remote control can be set to match each others Enters Multi remote control and designate one colour Blue Green Yellow Red to the TV Selects Off to disable Multi remote control function 2 Sets the Guest remote control to the corresponding colour by pressing ft MENU and one of the colour button simultaneously for more than 4 seconds J The Guest remote control can operate the TV with the corresponding colour EXAMPLE Press ft MENU and Red button simultaneously on the Guest remote control for more than 4 seconds to operate the TV with Red colour selected in Multi remote control menu Guest remote control will be set to default Blue colour after replacing batteries MyChoice Off Disables MyChoice function On MyChoice appears in the Guest home menu Press ft MENU gt MyChoice and enters authorized PIN code to watch MyChoice channels EN 39 English MyChoice setup This function allows you to customized MyChoice channel list 1 Enters MyChoice setup in the Professional setup menu 2 Sets MyChoice channels from the following TV channel lists RO List of MyChoice channels and normal channels Channels marked with X can only be watched after pressing authorized PIN code
27. er Press to enter Decoder menu 2 3 4 Press a to select Channel then press gt to enter 5 Select one channel to map to the decoder descrambler channel and press OK to confirm Select Status then press to enter Select EXT 1 SCART the connector used by the decoder descrambler Press OK Press EXIT to exit oO NO Note Select None if you do not want to map to the decoder descrambler channel Start a TV demo You can use demonstrations to better understand the features of your TV Some demos are not available on certain models Available demos are displayed in the menu list Note Before starting make sure to turn PBS mode off for TV Demo to take effect Press ft MENU Select Setup gt Features gt Demo Press gt to enter Demo Press AY to select a demo and press OK to view it Press EXIT to exit nm UON Reset the TV to factory settings You can restore the default picture and sound ttings of your TV The channel installation ttings remain the same Press ft MENU Select Setup gt Installation gt Factory settings Press to enter Factory settings Select Reset to start resetting Press OK Press EXIT to exit AMmBRW NG SG EN 27 English 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if
28. ge objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e freception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e ry using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device Cannot remove e sticker banner displayed on theTV To remove the logos and images set the location of your TV to home 1 Press ft MENU 2 Select Setup gt Installation gt Preferences gt Location 3 Select Home and press OK Sound issues There is a picture but sound quality is poor Note f no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to O e Check that the sound is not muted There is a picture
29. hen watching TV press OK to display the channel grid 2 Press OPTIONS L gt The channel options menu appears UJ Press AY to select Reorder then press OK Select the channel to rearrange then press OK L gt The selected channel is highlighted A D Press AVP to move the highlighted channel to the desired location then press OK 30 EN 6 Press OPTIONS L gt Done reordering appears on the screen 7 Press OK to confirm 8 Press EXIT to exit the channel grid Test digital reception You can check the quality and signal strength of digital channels This allows you to reposition and test your antenna or satellite dish Press ft MENU 2 Press AVP to select Setup gt Installation gt Channel installation gt Manual channel search Press to enter the menu Press AY 4b to enter the frequency of the channel you want to test Press OK to confirm the frequency then press OK again to confirm Search an NO BW When complete select Store to store the frequency Note If the signal quality and strength is poor reposition the aerial or satellite dish and retest If you still have problems with the reception of your digital broadcast contact a specialised installer 7 Professional mode instruction Introduction Included in this TV is a special functional mode that allows the TV to be configured for commerical application This feature is called Professional
30. icture settings 14 PIN code 21 Professional mode Activate 32 Options 33 PBS mode 35 Store settings 40 R Radio 25 Remote control Guest Remote control 8 Multi remote control 39 Professional Setup Remote control 31 RC lock 37 S Selectable AV 38 Skip scrambled signals 39 Smart card 45 Smart power 35 Software version 26 Sound settings 16 Source list 11 Store 40 Subtitle 23 T teletext 17 Teletext 11 Timer 21 Troubleshooting 50 U Universal access 17 USB Disconnect 25 Enable USB 38 Listen to music 25 Software update 26 USB break in 37 View photos 24 V Video formats 48 Volume 11 W Wall mount 49 Welcome message 36 EN 53 English 54 EN
31. intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Riskof injury damage to TV or void of warranty Never attempt to repair the TV yourself e Use the TV and accessories only as intended by the manufacturer e The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service or repairs LAN A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 99976 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics NV manufactures and sell
32. ired size inches pitch mm mounting bolts 10mm 19 75x75 4x M4 22 75x75 4 x M4 26 75x75 4 x M4 Product specification Design and specifications are subject to change without notice 19HFL3232D e Without TV stand Dimension WxHxD 455 x 303 7 x 56 mm Weight 3 16 kg e With TV stand Dimension WxHxD 455 x 328 7 x 1379 mm Weight 3 32 kg 22HFL3232D e Without TV stand Dimension WxHxD 526 02 x 343 5 x 55 79 mm Weight 4 0 kg e With TV stand Dimension WxHxD 526 02 x 369 5 x 148 96 mm Weight 4 2 kg 26HFL3232D e Without TV stand Dimension WxHxD 6374 x 410 8 x 63 mm Weight 5 21 kg e With TV stand Dimension WxHxD 63741 x 447 25 x 170 mm Weight 5 5 kg EN 49 English 10 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are correctly inserted according to the orientation Replace the remote control batteries if they are flat or weak e Clean the remote control and TV sensor ens The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV co
33. k RC lock OSD display igh security Auto scart Power on scart DMI CEC in Control settings USB break in Enable teletext Enable MHEG Enable EPG Enable subtitle Enable USB 9 e e s e gle elel ele g g Blue mute EN 33 English Digit timeout 0 5 9 9 seconds Control settings Selectable AV List of selectable external sources TV speaker enable On Off Speaker settings ndependent main speaker mute On Off Default main speaker volume 0 60 Blank channel All available channels Disable auto updating Software Channels Both Off Installation Skip scrambled signals ff On Multi remote control e Green Yellow Red Off yChoice ff On RO y TV channel list MyChoice setup R1 available channels Store Confirm Cancel 34 EN PBS settings PBS mode Enables disables the Professional mode On All settings in the Professional mode Setup menu are in effect Off The TV operates as a normal consumer TV Consumer setup A shortcut to enter the full TV menu This allows the installers to do all the TV setup settings USB to TV Loads the TV configuration data including the video audio channel Table and Professional mode settings from a USB device to the TV set TV to USB Loads the TV configuration data including the video audio channe
34. l Table and Professional mode settings from the TV set to a USB device Reset Selects Yes to reset all settings in Professional mode to factory default Switch on setting Max volume This option specifies the maximum allowable volume level of the TV Switch on picture format Sets available picture format when the TV is switched on Note e f the picture format is not supported with the activated source Auto format detection is applied Power on The power on function allows the TV to enter a specific mode On Standby or Last status of operation after the mains power is activated On When set the TV will always turn on after the mains power is activated Standby When set the TV will always turn to standby after the mains power is activated Last status When set the TV will always turn to the last status either On or Standby whenever the mains power is activated Smart power Adjusts the picture backlight to achieve the following power saving mode Off Smart power is disabled Custom mode is applied Low The picture backlight is at low power saving mode Cinema mode is applied Medium The picture backlight is at medium power saving mode Standard mode is applied High The picture backlight is at high power savings mode Energy saving is applied EN 35 English Switch on vol When the guest switches the TV
35. lance in an image Custom tint Customises tint setting Only available if Tint gt Custom is selected Digital Crystal Clear Fine tunes each pixel to match surrounding pixels This produces a brilliant high definition image Dynamic contrast Enhances contrast A Medium setting is recommended Dynamic backlight Adjusts brightness of the TV backlight to match lighting conditions MPEG artifact reduction Smoothes out transitions on digital pictures You can switch this feature on or off Colour enhancement Makes colours more vivid and improves the details in bright colours You can switch this feature on or off EN PC mode Adjusts the picture when a PC is connected to the TV via HDMI or DVI Picture format Changes the picture format Picture size Adjusts the viewing area when set to maximum you might see noise or a rough edge of an image Horizontal shift Adjusts the picture horizontally for PC VGA DVI HDMI or YPbPr Vertical shift Adjusts the picture vertically for PC VGA DVI HDMI or YPbPr Change picture format 1 Press A picture format bar appears 2 Press AY to selecta picture format Ly The selected picture format is activated J Press OK to confirm your choice Summary of picture formats The following picture settings can be configured Note Depending on the format of the picture U source some
36. mode This section has been designed to help install and operate this TV in Professional mode Before reading this section please read section 3 to 6 to set the basic functionality of this TV Benefits of Professional mode This TV is specially designed to operate in Professional Mode Professional Mode offers the following benefits e Access to the Consumer Menu can be blocked This prevents users e g guests from deleting or changing channel settings and or modifying picture and sound settings This ensures that T Vs are always set up correctly e A switch on volume and channel can be selected After switching on the TV will always start on the specified volume level and channel e The maximum volume level of the TV can be limited in order to prevent disturbance to other guest Channels can be blanked Video only e The TV local buttons VOLUME P CH and ft Home can be locked Screen information can be suppressed Professional Setup Remote control 2573 optional 1 C button OPTIONS Accesses options relating to the current activity or selection Equals to the function of amp OPTIONS on Guest remote control 2 E button OK Confirms an entry or selection GB Enters Professional setup menu Selects SETUP mode first Press M button to enter the Professional setup menu Note SETUP mode should be selected for hotel installer EN 31 Engli
37. nd we recommend that you update the TV software when updates are available Check www philips com support for availability Check the current software version 1 Press f MENU 2 Press AVP to select Setup gt Software update gt Current software inf L gt TheTV displays the current software information Download the software On your PC open a web browser and go to www philips com support N Download the latest software upgrade file to your PC Decompress the ZIP file A w Copy the autorun upg file to the root directory of the USB device Update software You can update the TV software via a USB storage device or OAD Over the Air software Download Update using a USB device Connect your USB storage device to the TV 1 Ifthe software update screen does not appear automatically select Setup gt Software update gt Local updates gt USB 2 Press OK to update the TV software manually J Follow the on screen instructions to complete the update 26 EN Note The TV restarts after the software update is complete Update using OAD If Professional mode is On your TV automatically receives software updates in semi standby mode without notice on screen The TV restarts after the software update is complete Change TV preferences Use the preferences menu to customise your TV settings 1 Press MENU 2 Select Setup gt Installation g
38. ng menus Watch TV Switches back to the aerial source if another source is selected Add new device Adds new devices to the home menu Setup Accesses menus to change picture sound and other settings Press OK to confirm your choice Press ft MENU to exit A CJ Tip After selecting Add new device follow the on screen instructions to select the correct device and connector 12 EN Use TV options menu 1 when watching TV press amp OPTIONS Ly TheTV options menu appears 2 Press AYP to select the following settings Universal access Quickly accesses the visually impaired and hearing impaired menus Only available when Universal access is activated see page 17 Use the universal access menu Picture and sound Quick accesses to picture and sound settings e TV setup Quick accesses to the TV setup menu TV speakers Turns TV speakers on or off Available only when you switch on Easylink Mark as favourite Mark current channel into favourite list Clock Displays current time on TV screen Show info Displays programme information UJ Press OK to confirm your choice Note TV options menu is not available when PBS is set to on Rename devices from the home menu After adding a new device to the home menu you can rename it to your preference 1 Press MENU 2 Press AY4b to select a device to rename J Pres
39. ols down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance 50 EN TV channel issues Previously installed channels do not appear in the channel list e Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T DVB T Lite or DVB C in your country Some channels are not automatically installed on my TV During installation make sure that you select the country where you are installing the T V Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV s e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV Loudspeakers unearthed audio devices neon lights high buildings and other lar
40. ou are prompted to enter your PIN code Set parental ratings Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings higher than your child s age 1 Press MENU 2 Press AY to select Setup gt Features gt Parental rating L A code setup screen appears J Enter your code using Numeric buttons L gt The parental rating menu appears Press AY to select an age rating Press OK to confirm Press ft MENU to exit Ov Ui Use subtitles You can enable subtitles for each TV channel Subtitles are broadcast via teletext or DVB T digital broadcasts With digital broadcasts you can select a subtitle language Enable subtitles on analogue TV channels Select an analogue TV channel Press TELETEXT Enter the three digit page number of the subtitle page with the Numeric buttons Press TELETEXT to switch off teletext Press SUBTITLE L gt The Subtitle mode menu appears UA WN oO Select On to display subtitles always or On during mute to display subtitles only when audio is muted Press OK to enable subtitles CON Repeat this procedure to enable subtitles on each analogue channel Tip Select Subtitle mode gt Off to disable subtitles Enable subtitles on digital TV channels 1 When watching digital channels press SUBTITLE L gt The Subtitle mode menu appears 2 Select
41. picture settings are not available Auto format Not for PC mode Automatically displays the suitable picture format If not wide screen is applied Super zoom Not for HD and PC mode Removes the black bars on the side of 4 3 broadcasts There is minimal distortion 4 3 Shows the classic 4 3 format Subtitle zoom Displays 4 3 pictures over the full area of the screen with sub titles visible Part of the top of the picture is clipped off EDE UE Movie expand 14 9 Not for HD and PC mode Scales 4 3 format to 14 9 Movie expand 16 9 Not for HD and PC mode Scales 4 3 format to 16 9 Wide screen Scales 4 3 format to 16 9 LE Unscaled For HD and PC mode only and in selected models only Allows maximum sharpness Some distortion may be present due to the broadcaster s systems Set your PC resolution to wide screen mode for best results EN 15 English Use smart sound Use smart sound to apply pre defined sound settings Press ft MENU 2 Press AYP to select Setup gt Sound gt Smart sound J Press aY to select the following settings Custom Applies the settings that were customised in the sound menu Standard Adjusts sound settings to suit most environments and types of audio News Applies settings for spoken audio such as news Movie Applies settings for movies 4 Press OK to confirm your choi
42. r TV is in standby mode The channels stored in your TV are updated every morning according to the channel information in the broadcast 1 Press MENU 2 Press AYP to select Setup gt Installation gt Channel installation gt Standby update J Select On to enable the automatic update or select Off to disable it Manually install channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct Press ft MENU 1 2 Press ava to select Setup gt Installation gt Channel installation gt Analogue manual install L gt The Analogue manual install menu appears Press AY to select System then press gt to enter Press AY to select your country or region Press OK to confirm aon A UW Press 4 to return to Channel installation menu Step 2 Search and store new TV channels 1 Press f MENU 2 Press AYP to select Setup gt Installation gt Channel installation gt Analogue manual install L gt The Analogue manual install menu appears J Press Av to select Search then press to enter 4 Press AY4 to manually enter the three digit frequency 5 Press OK to begin search L gt fa channel is unavailable at the selected frequency press OK to search for the next available channel 6 Press 4 when the new channel is found 7
43. remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects EN English 4 Use your TV This section helps you perform basic TV operations Switch your TV on off or to standby To switch on e If the standby indicator is off press Power at the side of the TV e fthe standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press Power at the side of the TV L gt The standby indicator switches off Ea Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet f you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV 10 EN Switch channels e Press P on the remote control or P CH on the side of the TV Enter a channel number using the Numeric buttons Press OK to use the channel grid Note When you use a favourite list you can only select those channels in the list Switch channels with the channel grid
44. resume play or stop playback lt gt Go to the previous or next music Music settings When listening to music press 2 OPTIONS to access one of the following music settings Start playback Stop playback Starts or stops the music e Repeat Play once Repeats a song Disables repeat play and plays a song or album once Shuffle on Shuffle off Enables or disables random play of songs e Show info Displays the file name TV speakers Available only when you activate Easylink Sets the TV speakers on or off Sound Adjusts the sound setting Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB storage device 1 Press EXIT to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device Listen to digital radio channels If dig chan insta 1 2 3 4 Select Select list gt All to exit radio channels and view all channels ital broadcasting is available digital radio nels are installed automatically during llation When watching TV press OK to display the channel grid Press OPTIONS Press AY to select Select list gt Radio L gt The radio channel grid appears Press AV lt 4P to select a radio channel and press OK to listen Note EN 25 English Update the TV software Philips continuously tries to improve its products a
45. s OPTIONS L gt The options menu appears 4 Press AY to select Rename device then press OK L gt A text input box appears Press AY4b to select characters Press OK to confirm each character Select Done then press OK to finish renaming devices l Os Ci Note The device name can be up to 16 characters long Press Aa to change an uppercase letter to a lowercase letter and vice versa Remove devices from the home menu If a device is no longer connected to the T V remove it from the home menu Press ft MENU Press AY 4b to select a device to remove Press OPTIONS Press AY to select Remove device then press OK Select Remove then press OK L The selected device is removed from the home menu nan BRWN Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Note When watching TV or using external devices press amp OPTIONS then select Picture and sound for quick access to picture and sound settings Use settings assistant Use the settings assistant to guide you through the picture and sound settings 1 Press MENU 2 Press AVP to select Setup gt Picture gt Settings assistant J Press OK L gt The Settings assistant menu appears Follow the on screen instructions to choose your preferred picture settings Use
46. s many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10A Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type J Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable Copyright
47. s or game consoles EXT RGB CVBS m m m m m Ly m m m m OULU LULL CULT Y SPDIF OUT Digital audio output to home theatres and other digital audio systems SPDIF OUT ZR PC IN VGA and AUDIO Audio and video input from a computer PC AUDIO IN PC IN AUDIO ES T SERV U For technical application only 42 EN Side connector COMMON INTERFACE COMMON INTERFACE Slot for a Conditional Access Module CAM COMMON INTERFACE 4 2 AUDIO L R Audio input from analogue devices connected to VIDEO L AUDIO R VHS 3 VIDEO Composite video input from analogue devices such as VCRs HDMI Available only in 26 inch TV Digital audio and video input from high definition digital devices such as Blu ray players E Blu ray Disc 4 USB Data input from USB storage devices USB dum 8 A Headphone Stereo audio output to headphones or earphones EN 43 English Connect a computer Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following connectors E HDMI cable and HDMI DVI adaptor Connection
48. s via DVI or VGA require an additional audio cable e HDMI cable VGA cable 44 EN Use a Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels Note Referto the documentation from your service operator on how to insert a smart card into the Conditional Access Module Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Switch off the TV and disconnect it from the power outlet 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV 4 3 Push the CAM in as far as it will go 4 Reconnectthe TV to the power outlet D Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services COMMON INTERFACE Access CAM services 1 After inserting and activating the CAM press ft MENU 2 Press AYP to select Setup gt Features gt Common interface L gt Applications provided by the digital TV service operator appear on the screen Note his menu option is available only if the CAM is inserted and activated correctly EN 45 English Us
49. sage Clear Clear the settings in Line 1 and Line 2 Message Time out Sets the period of time to display the welcome message on the screen when TV is turned on from standby Off Control settings Local KB lock Off The TV local buttons will function normally On The TV local buttons except POWER are locked All All TV local buttons are locked including f POWER button RC lock Disables the operation of the Guest remote control Off All buttons on Guest remote control will function normally On All buttons on the Guest remote control are disabled It is still possible to enter the Professional setup menu by pressing 3 1 9 7 5 3 a MUTE OSD display Sets this function to show or hide screen information Off Screen information is suppressed On Normal screen information is displayed High security Off Professional mode setup menu can be accessed by both Guest remote control Press 3 1 9 7 5 3 a MUTE Jand the Professional setup remote control Press M button On Professional mode setup menu can only be accessed by the Professional setup remote control Auto scart Enables auto scart switching or break in Professional mode Off Disables auto scart switching or break in Professional mode On Enables auto scart switching or break in Professional mode Power on scart Sets scart source as power on off bu
50. sh Activating the Professional mode setup menu 1 Switch on the TV and select a T V channel 2 Press the following buttons to access Professional mode setup menu 3 1 9 7 5 3 mk MUTE on Guest remote control M button on Professional setup remote control When SETUP mode is selected on the Professional setup remote control J Press AVP on the remote control to select and change any of the settings 4 When done select Store gt Confirm to save the changes Press EXIT to exit without saving D For Professional mode settings to take effect you must restart the TV mains power 32 EN Professional mode options This paragraph describes the functionality of each item in the Professional mode setup menu PBS mode Off On Consumer setup Action PBS settings USB to TV Action TV to USB Action Reset Action Max volume 0 Max Auto format Super zoom 4 3 Subtitle Switch on picture format zoom Movie expand 14 9 Movie Switch on setting expand 16 9 Wide screen Unscaled Power on On Standby Last status Smart power Off Low Medium High Last status Off On User defined Last status ff On Switch on channel User defined ist of channels Display message ff On Line 1 Edit Switch on vol Welcome message Line 2 Edit Clear Action essage Time out 20 sec 25 sec 30 sec ff On All ff On Local KB loc
51. smart picture Use smart picture to apply pre defined picture settings 1 Press MENU 2 Press ava to select Setup gt Picture gt Smart picture 3 Press Av to select one of the following settings Personal Applies the settings set in Settings assistant menu Vivid Applies rich and dynamic settings Standard Adjusts picture settings to suit most environments and types of video Cinema Applies settings for movie viewing Game Applies settings for games e Energy saving Applies low energy settings e Natural Applies the best picture quality Custom Lists customised picture settings J Press OK to confirm your choice L gt The selected smart picture setting is applied EN 13 English Manually adjust picture settings 1 2 3 Press ft MENU Press AY4b to select Setup gt Picture Press AY4b to select the following settings Smart picture Accesses pre defined smart picture settings Video contrast Adjusts the intensity of video contents keeping backlight unchanged Contrast Adjusts the intensity of backlight areas keeping video contents unchanged Brightness Adjusts the intensity and details of dark areas Colour Adjusts colour saturation Hue Compensates for colour variations Sharpness Adjusts sharpness in the image Noise reduction Filters and reduces noise in an image Tint Adjusts the colour ba
52. ss OK WN Note To disable the clock repeat the above procedure Change the clock mode 1 Press MENU 2 Press AYP to select Setup gt Installation gt Clock gt Auto clock mode J Press aY to select Automatic or Manual Press OK to confirm A Change the time zone 1 Press MENU Press AY4b to select Setup gt Installation gt Clock gt Time zone J Press AY to select your time zone Press OK to confirm Note This option is only available if you select Auto clock mode gt Manual in countries with clock transmission data Use daylight saving 1 Press MENU 2 Press AY to select Setup gt Installation gt Clock gt Daylight saving Press OK or to enter Daylight saving A CJ Press AY to select Standard time or Daylight saving time uw Press OK to confirm Note This option is only available if you select Auto clock mode gt Manual Use timers You can set timers to switch the TV to standby at a specified time Tip Set the TV clock before you use timers Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined period of time Tip You can switch off your TV earlier or reset the sleep timer during the countdown Press SLEEP on the Guest remote control to quick access the Sleep timer menu
53. sting codes EN 21 English Lock or unlock the TV Lock the TV to prevent access to all channels and connected devices 1 Press MENU 2 Press AY to select Setup gt Features gt TV lock L You are prompted to enter your PIN code J Enter your code using Numeric buttons L gt The TV lock menu appears 4 Press AY to select Lock or Unlock 5 Press OK to confirm L gt All channels and connected devices are locked or unlocked 6 Press ft MENU to exit Note e Switch the T V off and on again for the change to take effect f you select Lock you have to enter your code every time you turn on your T V Lock or unlock one or more channels 1 when watching TV press OK to display the channel grid Press AY4b to select a channel to lock or unlock Press OPTIONS Press AY to select Lock channel or Unlock channel For each selection press OK to lock or unlock the channel L gt The first time you lock or unlock a channel you are prompted to enter your PIN code nm AW N 6 Enter your code and press OK L gt Ifthe channel is locked a lock icon is displayed 7 Repeat the process to lock or unlock more channels 22 EN Switch the TV off and on again for the change to take effect fyou use P on your remote control to switch between channels the locked channels are skipped fyou access the locked channels from the channel grid y
54. sually impaired audio Select Off to disable audio descriptor Only applicable to the UK region Volume visually impaired Adjusts the volume of visually impaired audio Tip Press the colour buttons on the remote control to enter the options Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu 1 2 Press TELETEXT L gt The teletext screen appears Press OPTIONS L gt The teletext options menu appears Press AY to select one of the following options Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles Cycle subpage Cycles through subpages automatically if subpages are available Language Switches to a different language group to display a language correctly when it uses a different character set Freeze page Freezes the current page Dual screen Full Screen Enables and disables dual screen teletext Press AY 4b to make a selection then press OK to confirm Press TELETEXT to exit the teletext options menu Select teletext subpages A teletext page can hold several subpages Subpages are displayed on a bar next to the main page number 1 2 3 Press TELETEXT L gt The teletext screen appears Press AY to select a teletext page Press lt P to enter a subpage EN 17 English Select T O P teletext
55. t P Preferences e Location Optimises TV settings for your location home or shop E If Shop mode is selected The Smart picture setting will be switched to Vivid automatically to display the brightest backlight on screen E sticker is applicable to display the TV selling features on screen Volume bar Displays the volume bar when you adjust the volume Channel Information Displays information about the TV channel every time you switch channels Select Full to view channel information or Off to turn off the channel information Universal access Enables or disables the universal access menu e EasyLink Enables one touch play and one touch standby between EasyLink compliant devices Pixel Plus Link Overrides the settings of connected devices and uses the settings of the TV Available only when you activate Easylink e E sticker For shop mode only Sets the location of the e sticker Press AY 4b to select your preference Press OK Press EXIT to exit Un BK CJ Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection In this way you can select these channels by using the RC of your TV The decoder or a descrambler must be connected to EXT1 SCART Set decoder channel Map channels from a decoder or descrambler 1 Press MENU Select Setup gt Installation gt Decod
56. tionality Power management Available in selected models only The advanced power management of this TV ensures the most efficient use of its energy You can check how your personal TV settings the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption End of use To inform yourself on the correct disposal of the TV and batteries refer to Disposal of your old product and batteries in the user manual 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome This section gives you an overview of commonly used TV controls and functions Please read section 3 to 6 to set the basic consumer menu first then follow the instructions in section 7 to set the Professional mode menu Side controls and indicators O 1 Increases or decreases volume Q A A Home Toggles the home menu on or off 3 P CH Switches to the next or previous channel 2 Power Switches the product on or off The product is not powered off completely unless it is physically unplugged G Remote control sensor EN English Remote control 8 EN PHILIPS TELEVISION Standby On Switches the TV to standby if the TV is on S
57. tton When the connected scart source is turned on off the TV enters to on standby mode simultaneously HDMI CEC in HDMI CEC Philips EasyLink enables one touch play and one touch standby between HDMI CEC compliant devices Before activating HDMI CEC in function make sure the HDMI CEC compliant devices are urned to on Selects EasyLink gt On first before enabling HDMI CEC in in Professional mode e Refer to page 44 Use Philips EasyLink for more details about HDMI CEC function Off Disables HDMI CEC feature in Professional mode On Enables HDMI CEC feature in Professional mode USB break in Enables or disables USB break in feature in Professional mode Off When USB is plugged in the Multimedia menu will not appear automatically but users can access Multimedia menu from the Consumer setup menu On When USB is plugged in the Multimedia menu appears automatically Enable teletext Off Disables teletext in Professional mode On Enables teletext in Professional mode EN 37 English Enable MHEG For UK only Off Disables MHEG in Professional mode On Enables MHEG in Professional mode Enable EPG Off Disables EPG in Professional mode On Enables EPG in Professional mode Enable subtitle Off Closes subtitles in Professional mode On Displays subtitles in Professional
58. tware 26 Change TV preferences 26 Access decoder channel 27 Start a TV demo 2 Reset the TV to factory settings 27 6 Install channels 28 Automatically install channels 28 Manually install channels 29 Rename channels 30 Rearrange channels 30 Test digital reception 30 7 Professional mode instruction 31 Introduction 31 Benefits of Professional mode 31 Professional Setup Remote control 2573 optional 31 Activating the Professional mode setup menu 32 Professional mode options 33 8 Connect devices 41 Back connector 41 Side connector 42 Connect a computer 44 Use a Conditional Access Module 45 Use Philips EasyLink 46 Use a Kensington lock 47 9 Product information 48 Supported display resolutions 48 Multimedia 48 Tuner Reception Transmission 48 Remote control 48 Power 48 Supported TV mounts 49 Product specification 49 10 Troubleshooting 50 General TV issues 50 TV channel issues 50 Picture issues 50 Sound issues 51 HDMI connection issues 51 Computer connection issues 51 Contact us 51 EN English 1 Notice 2010 O Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the
59. witches the TV on if the TV is in standby QA GUIDE Switches between channel grid and programme list 3 SUBTITLE Launches the subtitle menu AV Selects connected devices OPTIONS Accesses options relating to the current activity or selection Some features are not available when PBS is set to on OK Confirms an entry or selection Press to display the channel grid when watching T V AY lt P Navigation buttons Navigates through the menus INFO Displays program information when available If the information spans multiple pages press OPTIONS to go to the next page 9 K MUTE Mutes or restores audio output P Programme Switches to the next or previous channel When the TV menu is on this functions as Page Up Down 0 9 Numeric buttons Selects a channel or setting E Picture format Launches the picture format menu MHEG CANCEL UK only Cancels MHEG 5 function 21 Volume Increases or decreases volume 5 gt BACK Returns to a previous screen Returns to the previously viewed channel ft MENU EXIT Toggles the main menu on or off O Colour buttons Selects tasks or options When Professional mode is On press to operate Multi remote control function EI MyChoice Opens MyChoice menu for entering authorized PIN code TELETEXT Toggles Teletext on or off Remote control usage When using the
60. y switches to the correct source Use one touch standby 1 Press Standby On on the TV s or device s remote control L gt TheTV and all connected HDMI devices switch to standby Set TV speakers to EasyLink mode When you play content from an EasyLink compliant home theater the TV speakers are automatically muted 1 Enable one touch play and one touch standby between your Easylink compliant devices by following the instructions in the previous section Press ft MENU Press A Y lt to select Setup gt Sound gt TV speakers gt Auto EasyLink TheTV speakers are turned off automatically when content from an Easylink compliant system is detected WN 4 Press A lt P to select Setup gt Sound gt TV speakers gt On to disable system audio control and enable the TV speakers Note To mute the TV speakers select TV speakers gt Off Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington ock between the slot and a permanent object such as a heavy table EN 47 English 9 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats e Resolution refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 720
Download Pdf Manuals
Related Search