Home

Philips 52PFL5605M 52" Full HD Black

Contents

1. e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e _ To avoid deformations and colour fading wipe off water drops as soon as possible e _ Avoid stationary images as much as possible Stationary images are images hat remain on screen for extended periods of time Stationary images include on screen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage EN 9 English End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused 4Y a When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Environmental efforts This TV has been awarded the European Union Ecolabel for its qualities A TV that is awarded energy efficient features lo access energy savi remote control These energy efficien e Energy saving pi apply a combina environmental the Ecolabel contains ng settings whilst watching TV press the green button on the settings include cture settings To ion of picture settings that reduces energy consumption pre
2. connected English Find detailed information on standby energy i consumption warranty policy spare parts with an HDMI cable playing a DVD and recycling of this TV at the Philips website disc for your country at www philips com e _an over the air HD broadcaster Information on end of use Sea Nees dwith Find out about the correct disposal of this eee receiver connEciea wit TV and batteries see Get started gt an HDMI cable playing HD content para gt End ouse 1 nn network e _an HD game console for example X Box 360 or PlayStation 3 connected with an HDMI cable playing an HD game EN 11 Placement e _ Before positioning the TV read all safety precautions See Get Started gt Important gt Safety Page 8 e _ Position the TV where light does not shine directly on the screen e _ The ideal distance from which to watch TV is three times its diagonal screen size For example if the diagonal screen size of the TV is 116 cm 46 the ideal viewing distance is approximately 3 5 m 138 from the front of the screen e While seated your eyes should be level with the centre of the screen Position the TV To mount the TV purchase an appropriate TV mount for your set Check your TV screen size and match it against the list below for the type of wall mount to purchase 81 cm 32 inches 200 mm x 200 mm M6 81 cm 32 inches 200 mm x 300 mm M6 For PFL6605 only 94 c
3. Smart sound experience menu to access frequently used sound settings 1 While watching TV press ON 2 Select Smart sound then select one of the following settings e Personal Sets the TV to you personal preferences set in the Sound menus in Setup e _ Standard Adjusts sound settings to suit most environments and types of audio e _ News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e _ Sports Applies sound settings ideally suited for sports 3 3 Press OK to confirm your choice 4 Press D to exit More sound settings 1 Press ff 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to adjust e _ Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e Bass Adjusts the bass level e Treble Adjusts the treble level e _ Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e _ Balance Adjusts the balance of the left and right speakers to best suit your listening position Reset to factory settings Resetting your TV to factory settings restores defaul
4. depth 11 55 kg estimate 40PFL56XX 40PFL57XX 40PFL58XX Without stand 605 mm height x 977 mm width x 86 mm depth 13 7 kg estimate with stand 649 mm height x 977 mm width x 236 mm depth 16 1 kg estimate 42PFL5405H without stand 640 mm height x 1019 mm 83 mm depth 11 38 kg estimate with stand 683 mm height x 1019 mm 236 mm depth 13 38 kg es 46PFL56XX 46PFL58XX without stand 685 mm height x 1122 mm width x width x imate width x 87 mm depth 17 9 kg estimate EN 62 with stand 731 mm 268 mm 52PFL56XX Withou 764 mm height x 1122 mm width x depth 21 3 kg estimate stand height x 1255 mm width x 87 mm depth 20 kg estimate with stand 813 mm 297 mm height x 1255 mm width x depth 24 kg estimate UMv 3139 137 04071 20100714 8 Index A age rating 25 audio language 32 audio lip sync 36 Auto start MHP 22 B bottom connectors 41 C CAM enable 55 CAM insert 55 care 9 change channels 19 channel list 18 channels favourites 24 channels hide or unhide 30 channels rename 29 channels reorder 29 channels switch 19 channels update 30 child lock age rating 25 child lock overview 25 child lock set code 25 clock 36 common interface 55 connect device 39 connect antenna 39 connect cha
5. gt Setup gt Watch demos on the second page of the setup menu Contact your dealer for more information Go to www philips com support to find FAQs that list the HD channels or providers in your country Network Internet J Router Network When you connect your TV to your home network you can play music photos and video from a computer or other media server on the same network Read more in Help gt Set up the TV gt Set up Network Page 33 EN 8 Available on certain models only Important Congratulations Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never insert objects into the ventilation slots or other openings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Never place the TV remote control or batte
6. or Time then press OK 2 Use the Navigation buttons to make your selection then select Done TV location A range of TV settings are applied to suit the location of the TV Shop or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all TV settings 1 While watching TV press ff 2 Select Setup gt TV settings gt Preferences gt Location gt Home or Shop then press OK 3 Restart the TV Stand mount or wall mount Specific TV settings are applied to suit the mounting location of the TV 1 In the Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update software TV software 1 Press ff 2 Select Setup gt Software settings gt Current software info then press OK The version of the current software is displayed To update the software use one of these options a update from digital broadcast b update with USB For more information see the following pages If available your TV can receive software updates via digital broadcasts If an update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted Before performing this procedure be sure to e _ Set aside some time to complete the entire update ave available a USB flash drive
7. Press 2 Select a picture format then press OK to confirm Note You can access picture formats via the experience menu OMI and the Setup menu The following picture formats can be selected e Auto fill Automatically enlarges the picture to fill the screen Minimal picture distortion subtitles remain visible Not for PC input e Auto zoom Automatically zooms the picture in to fill the screen as much as possible without distortion Black bars may be visible Not for PC input e _ Super zoom Removes the black bars on the sides of 4 3 broadcasts Not for HD or PC e Movie expand 16 9 Scales the classic 4 3 format to 16 9 Not recommended for HD or PC e Wide screen Stretches the classic 4 3 format to 16 9 e _ Unscaled Provides maximum detail for PC Only available when PC mode is enabled in the Picture menu Notes e Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Add new device Notes e Before watching a connected device you must add it to the home menu e HDMI ARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu 1 Connect and switch on the device 2 Press ft 3 Select Add your devices then press OK Follow the on screen instructions Watch connected device 1 Press ft 2 Select the device from the hom
8. To adjust the volume PHILIPS To switch TV channels PHILIPS To open or close the Home menu ff In the Home menu you can access connected devices picture and sound settings and other useful features PHILIPS To open or close the Browse menu W In the Browse menu you can access Teletext the channel list or the Electronic Programme Guide EPG EPG is not available in all countries EN English PHILIPS To open or close the Options menu E Options menus offer convenient settings related to what is on screen PHILIPS To open or close the Experience menu ON In the Experience menu you can access a range of frequently used settings EN 4 PHILIPS Back D To return to the previous TV channel or menu Press and hold to return to watching TV PHILIPS Red To select the red option access digital Interactive TV services or watch TV demonstration clips Available on certain models only PHILIPS Green To select the green option or the energy efficient settings PHILIPS Yellow To select the yellow option PHILIPS Blue To select the blue option or to open the Widgets Available on certain models only Read more about the remote control in Help gt Use your TV gt Remote control gt Overview Page 15 Alternatively find the answer in Search for Press to select the next TV tour The TV menus PHILIPS EN
9. a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press ft 2 Select Setup gt TV settings gt Preferences gt Sleeptimer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of five minutes The sleeptimer is switched off if it is set to zero minutes 4 Press OK to activate the sleep timer The TV switches to standby after the set period of time Child lock You can prevent your children watching TV by locking the TV Set or change the child lock code 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Child lock gt Set code or Change code 3 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Lock or unlock channels 1 In the child lock menu select Channel lock 2 Enter the child lock code with the Numeric buttons The Channel lock menu appears 3 Select channels to lock or unlock Parental rating Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings lower than your child s age 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Child lock gt Parental rating A message appears prompting you to enter the child lock code 3 Enter the child
10. connected to Read more in Help gt Use your TV gt Basic TV Menus gt Add your devices Page 18 Available on certain models only Connect devices If you connect an EasyLink HDMI CEC compliant device to the TV it is automatically added to the Home menu Access the Home menu and select the newly added device icon Read more in Help gt Connect the TV gt Use Philips EasyLink Page 51 In Help gt Connect the TV Page 39 you can learn to connect the most common devices through illustrations for example High Definition TV You can watch High Definition HD programmes in HD picture quality EN 7 English If you watch non HD programmes the picture quality will be similar to non HD TVs Your TV can display HD video content from e a Blu ray disc player connected with an HDMI cable playing a Blu ray disc e an upscaling DVD player connected with an HDMI cable playing a DVD disc e an over the air HD broadcaster DVB T MPEG4 e a digital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e an HD channel on your DVB C network e an HD game console for example X Box 360 or PlayStation 3 connected with an HDMI cable playing an HD game HD video clip To experience the stunning sharpness and picture quality of HD TV you can watch the High Definition video clip from the Home menu Press ff
11. for Microsoft Windows Nero MediaHome DixiM for Microsoft Windows XP Macrovision Network Media Server for Microsoft Windows Fuppes for Linux uShare for Linux Connectivity Rear Bottom Side EXT 2 Component Y Pb Pr Audio L R For 40PFL6605 EXT 2 SCART RGB CVBS For 40PFL6605 EXT 3 Component Y Pb Pr Audio L R amp Headphones Stereo 3 5 mm mini jack SERV U Service port NETWORK Ethernet EXT 1 SCART RGB CVBS HDMI ARC 1 HDMI Audio Return Channel HDMI 2 HDMI 1 3a For 40PFL6605 HDMI 3 HDMI1 3a DIGITAL AUDIO OUT Coaxial AUDIO IN DVI VGA stereo 3 5 mm mini jack ANTENNA 75 ohm coaxial VGA PC input HDMI HDMI 1 3c USB Cl Common Interface EN 61 English Dimensions Note Dimensions and weights are approximate values only Design and specifications are subject to change without notice 32PFL5405H Without stand 513 mm height x 796 mm width x 90 mm depth 8 35 kg estimate with stand 559 mm height x 796 mm width x 221 mm depth 9 6 kg es 32PFL56XX without stand imate 501 mm height x 790 mm width x 92 mm depth 10 kg estimate with stand 542 mm height x 790 mm width x 221 mm depth 11 5 kg es 37PFL5405H without stand mate 582 mm height x 912 5 mm width x 84 mm depth 9 55 kg estimate with stand 626 mm height x 912 5 mm width x 236 mm
12. installation gt System then press OK 3 Select the system for your country or region then press OK Step 2 Search and store new TV channels 1 In the Analogue Manual installation menu select Find channel then press OK 2 Press e The Navigation buttons or Numeric buttons to manually enter the channel frequency e The Navigation buttons to select Search Press OK to automatically search for the next channel 3 When the correct channel frequency is entered select Done then press OK 4 Select Store current channel to store the fine tuned channel as the current channel number or select Store as new channel to store it as a new channel number EN 31 English Install digital channels You can reposition your antenna to improve the reception You need to know the correct frequency to tune For best results contact the service provider or get a professional installer Note If you are prompted to enter a code enter 8888 1 Press ff 2 Select Setup gt Channel settings gt Channel installation gt Digital Reception test gt Search then press OK 3 Press the Numeric buttons to enter the channel frequency 4 Select Search then press OK 5 When the correct channel is located select Store then press OK 6 Press D to exit Notes e If the reception is poor reposition your antenna and repeat the procedure e f you receive the channel with DVB C h
13. overview 13 multimedia play files 25 mute TV speakers 20 EN 64 O options menu 19 P PC network settings 33 PC network media server 34 PC network wired 33 PC connect 50 pc display resolutions 60 cture format 20 p picture settings 28 position TV 12 power 60 R rear connectors 41 recycle 10 register product 8 reinstall TV 38 remote control batteries 16 remote control on screen 17 remote control usage 17 rename channels 29 reorder channels 29 S safety 8 Scenea enable 26 Scenea upload picture 27 screen care 9 settings assistant 28 settings picture 28 settings sound 29 shop mode 36 sleeptimer 24 smart card 55 smart picture 20 smart sound 20 software digital update 37 sound settings 29 specifications 60 subtitle analogue 25 subtitle language 32 subtitles language 25 switch channels 19 T echnical specifications 60 eletext 2 5 23 eletext digital text 23 eletext dual screen 23 eletext enlarge 23 eletext language 32 eletext menu 23 eletext search 23 eletext subpages 23 eletext Table Of Pages 23 U universal access enable 27 V visually impaired 27 volume adjust 20 volume mute 20 W wall mount TV 12 wallpaper 26 EN 65 English 2010 Koninklijke Philips Electronics N V All right
14. speakers e _ On Tum on TV speakers e _ EasyLink TV audio continues to be streamed through the TV speakers Switch the TV audio to the connected HDMI CEC audio device through the experience menu e _ EasyLink autostart Tum off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Switch TV audio in experience menu lf EasyLink or EasyLink autostart are selected access the experience menu to switch the TV audio 1 While watching TV press INL 2 Select Speakers then press OK 3 Select one of the following then press OK e TV On by default Streams TV audio through TV speakers until the connected HDMI CEC audio device switches to system audio control Thereafter TV audio is streamed through the connected device EN 53 English e _ Amplifier Streams audio through the connected HDMI CEC device If system audio mode is not enabled on the device audio will continue to stream from TV speakers if EasyLink was Use HDMI ARC selected If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode The HDMI 1 connector is HDMI 1 4 Audio Return Channel ARC compliant Use it to output audio to an HDMI ARC compliant audio device such as a Home Theatre System Home Theatre System HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device with
15. when multiple languages are available 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Language 3 Select one of the following settings then press OK e Primary audio Secondary audio Selects the available audio language for digital channels e Primary subtitles Secondary subtitles Selects the available subtitle language for digital channels e Primary Text Secondary Text Selects the available teletext for digital channels e Hearing impaired Enables or disables hearing impaired subtitles e Visually impaired UK only Selects the device for audio output e Volume Visually impaired UK only Adjusts the volume of the visually impaired audio e Preferred audio format Select Standard to receive standard audio format MPEG Select Advanced to receive advanced audio formats AAC EAC 3 or AC 3 if available e Mono Stereo Select Mono or Stereo if stereo broadcasting is available 4 Press D to exit Tip Set a secondary language in the same menu You receive this language if the primary language is unavailable Menu language 1 While watching TV press ff 2 Select Setup gt TV settings gt Preferences gt Menu language 3 Select a menu language from the list then press OK Set up network Benefits PC network If the TV is connected to your PC network you can play photos music and movies from a compu
16. 1080i 50 Hz 60 Hz 1080p 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz Multimedia Supported storage device USB FAT or DOS formatted Mass Storage Class compliant only Supported image files JPEG jpg jpeg EXIF JFIF SPIFF Supported video and audio files AVI video avi MPEG 4 SP MPEG 4 ASP MPEG 4 Part 2 AVI audio avi AC3 MPEG 1 L3 PEG L2 AAC_ADTS AAC ISO PEG video mpg mpeg vob ts MPEG 1 MPEG 2 PEG audio mp2 mp3 mpg mpeg vob MPEG 1 Layer 2 PEG 2 Layer 2 AC3 PEG 4 video mp4 MPEG 4 AVC H 264 L2 CIF MPEG 4 AVC H 264 L4 HD MPEG 4 Part 2 PEG 4 audio mp4 AAC LC AC3 AAC_ADTS AAC_ISO HE AAC v1 v2 KV video mkv H 264 KV audio mkv HE AAC AC3 Supported audio files without video PEG audio mp3 MPEG 1 Layer 3 WMA audio wma asf WMA v2 o V9 2 LPCM audio lpcm pcm way aif aiff pcm and pcm not supported on all sets PEG 4 audio aac mp4 m4a AAC LC HE AAC v1 v2 Playlists pls m3u Note Multimedia file names must not exceed 128 characters Supported DLNA compliant media server software Windows Media Player for Microsoft Windows Twonky Media for Microsoft Windows and Mac OS X Sony Vaio Media Server for Microsoft Windows TVersity
17. 5 English Let s learn more about these frequently used menus e the Home menu ft e _ the Browse menu W e the Options menu EP e the Experience menu OM PHILIPS In the Home menu ft you can select the source to watch such as a TV channel or movies from a connected DVD player or USB flash drive You can also add a new device or access the Setup menu for more settings PHILIPS EN 6 In the Browse Menu W you can access Teletext the channel list or the Electronic Programme Guide EPG EPG is not available in all countries PHILIPS In the Options menu B you can select settings related to what is shown on screen For example while you are watching a channel you can mark it as a favourite PHILIPS In the Experience menu OM you can quickly adjust Ambilight picture and sound settings You can select the ideal picture setting for Connect DVD players Blu ray Disc players movies games or music Or you can change or game consoles through HDMI the picture format of the on screen image The HDMI connection offers the best You can even change the surround settings picture and sound quality for the TV speakers i P If you connect a device to this TV access the Home menu to add tt You can also find the answer in Search for Press ft gt Add your devices then follow Press to select the next TV tour the on screen instructions Ensure that you select the TV connector that the device is
18. Connect more devices Enable game mode To prevent picture delay set the TV to Game console Game mode The most practical connections for a game 1 Press IEU console are at the side of the TV However 2 Select Smart picture gt Game then more connectors are available at the back of press OK the TV if needed 3 Press D to exit The most practical connections for a game console are at the side of the TV ee Game console EN 48 If you cannot use the side connector use an HDMI or the EXT2 YPbPr and Audio L R cable to connect the game console to the back of the TV On certain models EXT2 is labelled EXT 3 gS Game console Audio UR voer Noo oco a Audio L R Dig camera To view pictures on your digital camera connect it to the USB connection at the side of the TV and switch it on If the content of your camera does not appear automatically you may need to enable Picture Transfer Protocol PTP on the camera Refer to the camera s user manual for instructions Dig camcorder The most practical connection for a camcorder is at the side of the TV EN 49 English If you cannot use the side connector use an HDMI or the EXT2 YPbPr and Audio L R cable to connect the camcorder to the back of the TV On certain models EXT2 is labelled EXT3 Channel decoder 3 Set the channel you want to decode 4 Select Status then the location of the decoder 5 Press OK Befo
19. Follow the on screen instructions to complete the update and restart your TV EN 38 Reinstall the TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press ft 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the on screen instructions Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels Note If you are prompted to enter a code enter 8888 1 Press ff 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the on screen instructions 5 Connect the TV First connections Power Be sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time Antenna Locate the antenna connector at the back of the TV Insert the antenna cable securely into the antenna connector Note To receive DVB S broadcasts insert the antenna cable into the SAT DVB S connector on the side of the TV This is available on certain models only Antenna r About cables Overview Before you connect devices to the TV verify which connectors are available on the device Connect the device to the TV with the highest quality c
20. P application menu 14 gt Back Returns to a previous menu screen Press and hold to return to watching TV EN 16 Batteries Open the battery cover on the back of the remote control to insert the batteries Type AAA LRO3 1 5 V Make sure the and ends of the batteries line up correctly and are marked inside Remove the batteries if you are not using the remote control for a long time Dispose of batteries according to the end of use directives Read Get started gt Important gt End of use Page 10 Note The location of the battery compartment on some remote controls may be as follows Usage When using the remote control hold it close to the TV and point it at the remote control sensor Make sure that the line of sight between the remote control and TV is not blocked by furniture walls or other objects The following illustration is an example only the location of the remote control sensor may differ on your TV On screen remote control Note Available if the connected device is HDMI CEC compliant An On Screen Remote Control OSRC gives you easy access to commonly used functions The on screen buttons available differ depending on your TV setup and features of the connected HDMI CEC device To access the OSRC 1 While watching TV or a connected device press B 2 Select Show device keys then press OK 3 Use the Navigation buttons and OK to select and use an on
21. Register your product and get support at www philips com welcome 32PFL5605M 40PFL5605M 46PFL5605M 52PFL5605M EN User Manual PHILIPS Contents 1 Get started 3 TV Tour 3 Important 8 Enjoy HD TV 11 Position the TV 12 Product highlights 13 Access more information 14 2 Use your TV 15 Overview 15 Side controls and indicators 15 Remote control 15 Basic TV menus 17 Watch TV 19 Watch a connected device 21 Use MHP 21 3 Use more of your TV 23 Use teletext 23 Favourite channels 24 Use EPG 24 Use timers and locks 24 Use subtitles 25 Access multimedia 25 Use Scenea 26 Universal access 27 4 Set up the TV 28 Change picture and sound settings 28 Change channel settings 29 Install channels 31 Change language settings 32 Set up network 33 Change other settings 36 Update software 37 Reinstall the TV 38 5 Connect the TV 39 First connections 39 About cables 39 TV connectors overview 41 Connect devices 43 Connect more devices 48 Use Philips EasyLink 52 Use a CAM 55 EN 2 Troubleshooting 57 Contact us 57 General TV issues 57 TV channel issues 57 Picture issues 58 Sound issues 58 HDMI connection issues 59 USB connection issues 59 PC connection issues 59 Technical data 60 Overview 60 Power and reception 60 Display and sound 60 Display resolutions 60 ultimedia 61 Connectivity 61 Dimensions 62 Index 63 1 Get started TV Tour The remote control PHILIPS
22. TV settings gt Picture then press OK 3 Select a setting to adjust e _ Smart picture Accesses pre defined smart picture settings e Reset Resets to factory default settings e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas e Colour Adjusts colour saturation e Hue Compensates colour variations in NTSC encoded transmissions e Sharpness Adjusts sharpness in the image e Noise reduction Filters and reduces noise in an image e Tint Adjusts the colour balance in an image e Custom tint Customises tint setting e Pixel Plus HD Pixel Precise HD Accesses advanced settings including HD Natural Motion 100 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma e PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content e Light sensor Adjusts settings dynamically to match lighting conditions e Picture format Changes the picture format e _ Screen edges Changes the picture size e Picture shift Adjusts the position of the picture Not applicable if selected picture format is Auto zoom or Wide screen Smart sound settings Use the
23. all he wired network The TV constantly searches for a network connection f asked agree to the End User Licence Agreement Find the latest End User Licence Agreement at www philips com Network settings The TV s network settings that are used to connect to your router are standard and set to automatic This ensures easy connection with any available network EN 33 English If you have problems with the network connection you might want to adjust the settings so that they are appropriate for your home network If you are unsure ask someone with knowledge of network settings to help you To set specific network settings press ff gt Setup gt Network settings and press OK For more information on Page 34 access the PDF version of this user manual on the Internet at www philips com support PC media server settings TVersity v 0 9 10 3 Microsoft Windows Enable media sharing n Microsoft Windows start TVersity Click he Settings tab and click the Start Sharing button A pop up window tells you that the media server service is started Click OK Set folders for media sharing In TVersity click the Sharing tab Lil Click the green plus icon and select Add folder In the Add media pop up window click the Browse button ES EN 34 In the Browse for Folder window select a folder with music photos or videos that you want to share and click OK T
24. at can be pulled away Ensure that no part of the TV hangs over the edge of the mounting surface ever place the TV on tall furniture such as a bookcase without anchoring oth the furniture and TV to the wall ra suitable support moog ducate children about the dangers of climbing on furniture to reach the TV Risk of overheating ever install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV Risk of injury fire or power cord damage e _ Never place the TV or any objects on the power cord e _ To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all times e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the socket and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C 41 F unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power socket Screen care e Risk of damage to the TV screen ever touch push rub or strike the screen with any object
25. blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your preferred language For more information see Set up the TV gt Change language settings gt Menu language see Menu language on page 33 When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as it cools down and warms up This does not impact performance When the TV is in standby mode a startup splash screen is displayed then returns to standby mode This is normal behavior The startup screen is displayed when the TV is disconnected from the mains and reconnected To switch on the TV from standby press on the remote control or press any key on the side of the TV TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation Check that the TV supports DVB T DVB C or DVB S in your country See the listed countries on the back of the TV EN 57 English Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e _ Check that the correct device is selected as the TV source There is sound but no picture Check t
26. ce pressing amp on the TV remote control switches the TV and all connected HDMI devices to standby mode System audio control When you connect your TV to for example an HDMI CEC compliant Home Theatre System HTS your TV speakers automatically mute and audio from the TV plays through the HTS For more information about system audio control and other types of TV speaker configurations see Connect the TV gt Use Philips EasyLink gt TV speakers Page 53 EN 52 EasyLink Remote Control EasyLink Remote Control allows you to control HDMI CEC compliant devices using your TV remote control To enable EasyLink Remote Control see Connect the TV gt Use Philips EasyLink gt Enable or disable EasyLink Remote Control Page 53 Pixel Plus Link Connected Philips EasyLink devices may apply their own picture quality processing to a video before streaming it to the TV This may interfere with the image processing of the TV Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices To enable Pixel Plus Link 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt Pixel Plus link gt On 3 Press OK to activate Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV The video image is thus stretched across the whole of your TV display without the need to create a s
27. cifications at www philips com support Reception e _ Antenna input 5ohm coaxial IEC75 e _ TV system DVB COFDM 2K 8K e _ Video playback NTSC PAL SECAM e Digital TV MPEG 4 DVB T Terrestrial DVB C Cable DVB S Satellite on certain models only HP Multimedia Home Platform only available in Italy e Tuner bands VHF UHF S Channel Hyperband Display and sound Picture Display Display type LCD Full HD W UXGA Diagonal size 81 cm 32 inch 94 cm 37 inch 102 cm 40 inch 107 cm 42 inch 117 cm 46 inch 132 cm 52 inch e Aspect ratio Widescreen 16 9 e Panel resolution 1920 x 1080p 100 Hz e Pixel Plus HD picture enhancement e 1080p 24 25 30 50 60 Hz processing EN 60 e 100 Hz LCD Sound e Output power RMS 20 W e Incredible Surround e Clear Sound e Virtual 2 1 not available on all models e Mono Stereo NICAM analogue NICAM on certain models Display resolutions Computer formats HDMI resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1360 x 768 60 Hz 1280 x 1024 60 Hz 1600 x 1200 60 1920 x 1080 60 Hz Computer formats VGA resolution refresh rate 640 x 480 60 Hz 800 x 600 60 Hz 1024 x 768 60 Hz 1360 x 768 60 Hz 1280 x 1024 60 Hz 1600 x 1200 60 Hz 1920 x 1080 60 Hz Video formats resolution refresh rate 480i 60 Hz 480p 60 Hz 576i 50 Hz 576p 50 Hz 720p 50 Hz 60 Hz
28. e menu 3 Press OK to confirm your choice Use MHP Overview For Italy only Digital TV broadcasters provide Multimedia Home Platform MHP an interactive TV service With MHP you can view e _ TV programme information e Government services e Weather forecasts If your TV is connected to a home network with Internet connection you can experience true interactivity and respond directly to the MHP application See Help gt Set up the TV gt Set up network Page 33 For the availability of interactive services contact your broadcasters With this interactivity you can respond to MHP applications for example e Vote e _Shop online e Request customised information e Answer a quiz competition or game e Pay for a video on demand VOD programme Start application 1 Switch to a channel with MHP As the MHP application begins to load an MHP icon is displayed When the load is complete a blinking symbol is displayed 2 Press the button according to the symbol for example the red button The MHP application launches 3 To use the application follow the on screen instructions 4 To exit press D or EXIT For more information about the application contact the broadcaster Note If the MHP application does not load enable MHP auto start read Help gt Use your TV gt Use MHP gt Auto start Page 22 EN 21 English Select application I
29. e options Symbol rate mode and Symbol rate are available n Symbol rate mode select Automatic unless your cable provider supplies you with a specific symbol rate value Install satellite channels For certain models only If your satellite is connected to the SAT connector you can receive satellite channels Note If you are prompted to enter a code enter 8888 1 While watching TV press ff 2 Select Setup gt Search for satellite gt Reinstall channels 3 Follow the on screen instructions to complete the installation of satellite channels 4 Once complete select Finish and then press OK EN 32 Fine tune analogue channels If the reception of an analogue TV channel is poor try fine tuning the TV channel Note If you are prompted to enter a code enter 8888 1 Press ft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual installation gt Fine tune and then press OK 3 Press or r to fine tune the channel 4 When the correct channel frequency is selected select Done and then press OK 5 Select Store current channel to store the fine tuned channel under the current channel or select Store as new channel to store under a new channel number Change language settings Audio subtitle teletext languages Digital TV channels may stream several audio subtitle and teletext languages with a broadcast Set preferred languages
30. eparate subtitle bar at the bottom of the screen To enable auto subtitle shift 1 Press ff 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Audio only mode Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby N Press IHI to receive audio from the connected Philips EasyLink device If available audio only mode is enabled Accept the prompt on the TV to enable audio only mode e Control the audio playback with the TV remote control Enable or disable EasyLink Remote Control Caution This is an advanced setting Verify that all connected HDMI CEC compliant devices support this setting Devices that do not support this setting will not respond to commands from the TV remote control 1 Press ff 2 Select Setup gt TV settings gt EasyLink gt EasyLink Remote Control gt On or Off 3 Press OK to activate Notes e _ If you cannot exit from the connected device s menu press gt e To switch back to TV control press f and select Watch TV e To control another device press f and select the device from the home menu e A summary of EasyLink buttons you can use with the TV remote control is available at Connect the TV gt Use Philips EasyLink gt EasyLink buttons Page 53 EasyLink buttons Control HDMI CEC c
31. erface Slot for a Conditional Access Module CAM 4 SAT DVB S Digital signal input from DVB S broadcasts Available on certain models only Connect devices Blu ray disc player Use an HDMI cable to connect the Blu ray disc player to an HDMI connector on the back of the SS TV Blu ray Disc Player TV N oo0o0000 O DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the back of the TV DVD player T 000000 O Co SOS00D a HDMI DVD Recorder First use two antenna cables to connect the antenna to the DVD Recorder and the TV SAT is available on certain models only CG Antenna i ge EN 43 English Finally use a SCART cable to connect the DVD Recorder to a SCART connector on the back of the TV Tar 00000 O CO 5000 rs EXT 1 E Recorder Home Theatre System First use an HDMI cable to connect the device to the TV Ca e System DVD Home Theatr Q00000 O Co SS00D HDMI Finally use a digital audio cinch cable to connect the device to the TV not required for HDMI ARC Digital Audio Ta DVD Home Theatre System AM C O Digital Audio Out Audio and video synchronisation sync If the sound does not match with the video on screen you can set a delay on most DVD Home Theatre Systems to match the sound and video EN 44 EasyLink Philips EasyLink gt Configure TV speakers To automatically mute the TV
32. ert the empty USB flash drive into a USB connector on your PC 2 On your PC create a folder called upgrades in the root directory of the USB flash drive 3 In your web browser navigate to www philips com support 4 On the Philips Support site find your product and locate the Help file for your TV The Help file a upg file is compressed into a zip archive EN 37 5 If the Help file on the Philips Support site is a later version than the file in your TV click it to save the file to the USB flash drive 6 Using the archive utility extract the zip file to the upgrades folder on the USB flash drive 7 The upg Help file is extracted 8 Disconnect the USB flash drive from the PE e Do not switch off the TV or remove the USB flash drive during the update e Ifa power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue the update as soon as power is restored e Ifan error occurs during the update retry the procedure If the error reoccurs contact Philips Consumer Care 1 Switch on the TV 2 Connect the USB flash drive containing the upg Help file to the USB connector on the TV Disconnect all other USB devices from the TV 3 Press ff 4 Select Setup gt Software settings gt Local updates The updates screen appears 5 Select the upg Help file and press OK A message will display the update status
33. es e _ During installation leave Settings unchanged unless your digital provider provides you with the specific values to enter e When digital TV channels are found he list of installed channels may display empty channel numbers You can rename reorder or uninstall these channels Access DVB C or DVB T channels If you have installed both DVB C and DVB T channels you have to switch to the respective network to watch channels on that network 1 While watching TV press ff 2 Select Setup gt Channel settings 3 Select Channel installation gt Antenna or Cable DVB 4 Select one of the following settings e Antenna DVB T Access free to air antenna or digital DVB T channels Cable Access cable or digital DVB C channels 3 Press OK to confirm your choice 4 Press D to exit The TV switches to the selected channel list Access DVB S channels for certain models only If your satellite is connected to the SAT connector you can receive satellite channels Press ff gt Watch satellite to watch satellite channels Install analogue channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct If you are prompted to enter a code enter 8888 1 While watching TV press ft 2 Select Setup gt Channel settings gt Channel installation gt Analogue Manual
34. es being broadcast e _ View upcoming programmes e Group programmes by genre e _ Set reminders when programmes start e _ Set up preferred EPG channels Notes e EPG is not available in all countries e For more information on EPG see Use more of your TV gt Use EPG Page 24 Multimedia View or play your own multimedia files such as photos music and videos from the USB connection on the side of the TV See Use more of your TV gt Access multimedia Page 25 EN 13 English Access more information On screen You are reading the on screen user manual This manual contains all of the information you need to install and use this TV Access the user manual by selecting Help in the home menu Before carrying out instructions temporarily close the user manual by pressing ff on the remote control Open the user manual at the same page by selecting Help in the home menu On the Internet A printable PDF version of this user manual is available on the Internet It contains the latest information and detailed feature explanations not covered by this on screen user manual Access the PDF as well as other product information including FAQs and firmware upgrades at www philips com support EN 14 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators 1 wa Increases or decreases volu
35. experience menu which provides a range of frequently used settings The experience bar menu gives you easy access to e Picture format Changes the picture format e Smart picture Frequently used picture settings e _ Smart sound Frequently used sound settings e Speakers Configure TV speakers for Philips EasyLink e Picture shift Adjusts the position of the picture EN 18 Channel list The channel list displays the TV channels and possible radio stations installed on your TV 1 While watching TV press W 2 Select Channel list then press OK 3 Select a channel then press OK to access the channel 4 Press D to exit the channel list without changing the channel Add your devices After you connect a device to the TV add this device in the home menu for easy access In the home menu select Add your devices then press OK Follow the instructions on screen to add the device to the home menu To remove a device from the home menu select the item press B and select Remove this device Press OK Setup Setup in the home menu allows you to change most of the TV settings including e Picture or sound settings e Installation or update of TV channels e Update of TV software e _ Other special features 1 In the home menu select Setup then press OK 2 Select an item with the Navigation buttons then press OK e Quick picture and sound settings Guides you through
36. f the channel does not launch the desired MHP application the channel might have two or more MHP applications To select another MHP application 1 While you are watching the channel press 1 2 Press PP to select MHP applications then press OK A menu is displayed 3 Select Disable MHP auto start then press OK Auto start is disabled and the list of applications in the menu is enabled 4 Select an application then press OK The selected application begins to load Auto start MHP applications start automatically once you switch to a channel with MHP You can disable or enable this auto start behaviour 1 While you watch a channel with MHP pressiD select MHP applications then press OK A menu is displayed 2 Select Disable MHP auto start or Enable MHP auto start then press OK Auto start is disabled or enabled EN 22 3 Use more of your TV Use teletext Select a page 1 Press TELETEXT 2 Select a page by e _ Entering the page number with the Numeric buttons e Pressing ar or rea to view the next or previous page e Pressing the Colour buttons to select a colour coded item 4 Press D to exit teletext Access teletext options 1 When in teletext press amp 2 Select an option e Freeze page Unfreeze page Freezes or unfreezes the current page e Dual screen Full screen Enables or disables dual screen teletext which splits the current channel or source
37. gh Definition HD TV signals O00000 O Co oaoa Scart TV connectors overview Rear 1 SERV U For use by service personnel only 2 EXT 2 EXT 3Component YPbPr Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 3 Stereo audio output to headphones or earphones 4 NETWORK Data input from a network Available on certain models only 5 EXT 2 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles Bottom ff DC 1 EXT 1 SCART Analogue audio and video input from analogue or digital devices such as DVD players or game consoles 2 DIGITAL AUDIO OUT Digital audio output to home theatres and other digital audio systems 3 HDMI Digital audio and video input from high definition digital devices such as Blu ray players The second connector is available on certain models only EN 41 English 4 HDMI ARC In addition to normal HDMI functionality outputs TV audio to an HDMI ARC compliant device such as a home theatre system 5 AUDIO IN Audio i 6 ANTENNA Signal cable or satellite 7 VGA Video input fi Side EN 42 nput from a computer input from an antenna rom a computer 1 HDMI Digital audio and video input from high definition digital devices such as Blu ray players 2 USB Data input from USB storage devices 3 Cl Common Int
38. hat the picture settings are correctly set There is poor TV reception from an antenna connection e _ Check that the antenna is properly connected to the TV e Loudspeakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e _ Check that the devices are connected properly e _ Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device The picture from broadcasts is scrambled You may need to use a Conditional Access odule to access content Check with your operator EN 58 An e sticker banner displaying information appears on the TV display The TV is in Shop mode Remove the e sticker by setting the TV to Home mode then restarting the TV See Setup the TV gt Change other settings g
39. in Setup e Vivid Rich and dynamic settings ideal for daylight use EN 20 e Natural A natural picture setting e _ Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings e _ Standard Adjusts picture settings to suit most environments and types of video Factory default settings e _ Photo Ideal settings for viewing photos e Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit Use Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IU 2 Select Smart sound then select one of the following settings e Personal Sets the TV to you personal preferences set in the Sound menus in Setup e _ Standard Adjusts sound settings to suit most environments and types of audio e News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 5 3 Press OK to confirm your choice 4 Press D to exit Change picture format Change the picture format to suit your viewing experience 1
40. ings on media sharing open the Settings window When the device icon the TV is checked with a green tick click OK Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library In the Add to Library window select My folders and those of others that can access and click the Advanced Options button etende Ez Cd With Advanced Options open you can add specific folders to the list to share and click Add n the Add Folder window select a folder with music photos or videos that you want o share with other devices and click OK n the Add To Library window the newly added folder is shown You can add more folders to share Click the OK button to add he files to the library You can now enjoy music photos and videos on your TV EN 35 English Change other settings Energy efficient settings 1 While watching TV press the green button 2 Select one of the following settings then press OK e _ Energy saving Applies a combination of picture settings to reduce energy consumption e Mute screen Tums off the TV display Muting the screen saves energy if you just want to listen to audio from the TV e Light sensor To save energy the built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Audio lip sync Turn on digital audio lipsync to automatically sync the image on yo
41. lock code with the Numeric buttons 4 Select an age rating then press OK Al programmes beyond the selected age rating are blocked For information on child lock codes see Use more of your TV gt Use timers and locks gt Child lock Page 25 Use subtitles On analogue channels 1 Switch the TV to an analogue TV channel 2 Press W then select Text and press OK 3 Enter the three number page number of the subtitles page usually 888 4 Press D to exit teletext Subtitles display if available On digital channels Not supported on MHEG channels 1 While you are watching a digital channel press then select Subtitles and press OK 2 In the menu that appears select Off On or On during mute then press OK Note With On during mute the TV displays subtitles only when the sound is muted with Subtitle language This feature is only supported on selected digital channels 1 While watching TV press B 2 Select Subtitle language 3 Select a subtitle language from the list then press OK Note More information about language settings is available in Set up the TV gt Change language settings gt Audio Subtitle Teletext languages Page 32 Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of da
42. m 37 inches 300 mm x 200 mm M6 102 cm 40 inches 200 mm x 200 mm 107 cm 42 inches 300 mm x 200 mm 117 cm 46 inches 300 mm x 300 mm 132 cm 52 inches 300 mm x 300 mm Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5 cm 2 2 from the back of the TV For 32 inch to 40 inch TVs For PFL6605 only EN 12 Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 11 mm max 13 mm For 32 inch and 40 inch TVs Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 10mm max 15mm For 37 inch to 42 inch TVs Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 10mm max 12mm For 46 inch and 52 inch TVs Before you wall mount the TV make a note of the correct length of the screw You can determine the length of the sc
43. me In he home menu these buttons allow you to move horizontally 2 ff Home Accesses the home menu Press again to launch an activity in the home menu 3 P CH Switches to the next or previous channel In the home menu these buttons allow you to move vertically 4 Power Switches the TV on or off o 1 Standby indicator remote control sensor Remote control Overview i 1 Standby Switches the TV to standby if it is on Switches on the TV if it is in standby 2 Home Accesses the home menu 3 W Browse Accesses the browse menu to select TV channel list the Electronic Programme Guide teletext and MHP application options MHP application options are only available for selected models EN 15 English 4 ar a Navigation buttons Navigates menus and selects items 5 rea Previous Next Switches channels Also skips through pages of a menu and between tracks albums or folders 6 OK Confirms an entry or selection 7 mm Experience Accesses the experience menu 8 amp Options Accesses options for the current activity or selection 9 Volume and Mute Increases or decreases volume mutes or restores audio Ee 10 Boer 10 Colour buttons Selects tasks or options Not supported in MHEG mode 11 0 9 Numeric buttons Selects a channel or setting 12 TELETEXT Toggles teletext on or off 13 EXIT Exits the MH
44. n in use as digital services will be deactivated Access CAM services 1 After inserting and activating the CAM press amp 2 Select Common interface then press OK 3 Select the CAM provider and press OK EN 29 English 6 Troubleshooting Contact us f you cannot resolve your problem refer to he FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the leaflet accompanying your product ake a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty General TV issues The TV does not switch on e Disconnect the power cable from the power socket Wait for one minute then reconnect it e Check that the power cable is securely connected e _ Check that the power switch on the bottom back of the TV is switched on The TV does not respond to remote control or side controls when switched on The TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behaviour The standby light on the TY blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the
45. nels broadcast special audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 While watching TV press amp 2 Press the green button to select Visually impaired 3 Use the following buttons to select e Red Off Tum off visually impaired audio e _ Yellow Headphones Hear visually impaired audio from headphones only e Green Speakers Hear visually impaired audio from speakers only e Blue Speakers headphones Hear visually impaired audio from speakers and headphones only 4 Press D to exit Note The green and yellow buttons are not applicable if EasyLink Remote Control is enabled For more information see Connect the TV gt Use Philips EasyLink gt EasyLink features Page 52 Tip To verify whether visually impaired audio is available press B and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 In the Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press D to exit Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 P
46. nnel decoder 50 connect PC 50 connect power 39 connect USB 25 connectors bottom 41 connectors rear 41 contact us 57 controls side 15 D decoder 50 default settings 29 demo 29 devices add 21 devices watch 21 digital channels overview 13 digital channels subtitles 25 digital radio 26 digital TV 13 imensions 62 a a isplay resolution 60 E EasyLink 52 EasyLink buttons 53 EasyLink enable 52 EasyLink features 52 EasyLink RC key forward 53 EasyLink TV speakers 53 end of use 10 environment efforts 10 environment recycle 10 EPG enable 24 EPG menu 24 EPG overview 24 F factory settings 29 favourites list add 24 favourites list select 24 G green eco overview 10 green eco settings 10 EN 63 English H DMI 40 DMI ARC 54 hearing impaired 27 hide or unhide 30 High Definition HD content 11 high definition display 13 home menu 17 home mode 36 information on Internet 14 information on screen 14 K kensington lock 11 L anguage 23 anguage menu 33 anguage others 32 ist 18 ocation home or shop 36 ocation stand or wall mount 36 M menu add device 18 menu channel list 18 menu home 17 menu language 33 menu options 19 menu setup 18 MHP 21 multimedia
47. oduct contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health We continually focus on lowering the environmental impact of our innovative consumer products We aim our efforts towards making environmental improvements during manufacturing including reduction of harmful substances promoting energy efficient use end of life instructions and product recycling EUROPEAN UNION ECOLABEL Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 Thanks to our environmental efforts this TV is awarded the European Ecolabel Use a Kensington lock Your TV is equipped with a Kensington security slot on the bottom of the TV Purchase a Kensington anti theft lock not supplied to secure the TV K Enjoy HD TV Full HD content This TV can display full High Definition HD video content To enjoy HD content you must connect your TV to an HD source Contact your dealer for more information on where to obtain HD video content in your country Your TV can display HD video content from e a Blu ray disc player connected with HDMI cable playing a Blu ray disc an e an upscali ng DVD player
48. omplete press the Navigation buttons to select Done e To clear the entry select Clear e To cancel select Cancel 7 Press OK to confirm your choice 8 Press D to exit Hide or unhide channels Hide channels Hide channels from the channel list to prevent unauthorised access 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list select the channel to hide then press amp 4 Select Hide channel then press OK The channel is hidden Unhide channels 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed 5 Select the channel to unhide then press B 6 Select Unhide channel then press OK Repeat steps 5 and 6 to unhide other channels Update channel list When the TV was switched on for the first time a full installation of channels was performed You can set the TV to add or remove digital channels automatically You can also manually start the channel update EN 30 Automatic update To set the TV to update digital TV channels automatically leave the TV in standby mode Once a day the TV updates earlier found channels and stores new channels Empty channels are removed from the channel list If a channel update is performed a message appears a
49. ompliant devices with the following buttons on the TV remote control e OK Starts pauses or resumes playback on the connected device Also activates a selection or accesses the menu of the device ra Previous m Next Searches backwards and forwards on the connected device e Numeric buttons When EasyLink is enabled selects a title chapter or track e amp Options Displays the menu of the connected device When ff is pressed the TV menu is displayed e Standby Press to enable one touch standby This switches the TV and the connected device to standby Other EasyLink buttons are available via On Screen Remote Control OSRC To access the OSRC 1 While watching a connected device press amp 2 Select Show remote control then press OK 3 Use the Navigation buttons and OK to select and use an on screen button 4 Press D to exit Configure TV speakers You usually connect the TV to an HDMI CEC compliant device such as a HTS using both an HDMI cable for video and a digital audio cable for audio You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant see Connect the TV gt Use Philips EasyLink gt Use HDMI ARC Page 54 Page 54 Configure TV speakers 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select one of the following options then press OK e Off Turn off TV
50. onnection available Good quality cables ensure a good transfer of picture and sound The connections shown in this user manual are recommendations only Other solutions are possible Tip If your device only has composite RCA connectors use a SCART cinch adapter to connect the device to a SCART connector on the TV Add your devices When you have connected a device to the TV always add this device as an item in the home menu With this item in the home menu you can easily switch to view from this device EN 39 English To add a new device press then select Add your devices Follow the on screen instructions HDMI An HDMI connection has the best picture and sound quality e _ One HDMI cable combines video and audio signals Use HDMI for High Definition HD TV signals and to enable EasyLink e The HDMI ARC connector on the TV features HDMI ARC functionality This allows output of TV audio to an HDMI ARC compliant device e Do not use an HDMI cable longer than 5 metres 16 4 feet kk kkk EN 40 Y Pb Pr Use the Component Video YPbPr connection together with an Audio Left and Right connection for sound Match the YPbPr connector colours with the cable plugs when you connect YPbPr can handle High Definition HD TV signals Audio L R YPbPr 200000 O SCART A SCART cable combines video and audio signals SCART connectors can handle RGB video signals but cannot handle Hi
51. out the need for an additional digital audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI ARC connectors EN 54 Enable or disable HDMI ARC Note Enabling HDMI ARC automatically adds the device to the home menu 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt HDMI 1 ARC gt On or Off 3 Press OK to activate Watching a CAM service 71 AM OOOO Ifa CAM is inserted and subscription fees Use a CAM are paid the TV shows the programme from the digital TV service provider The Insert and activate a CAM applications functions content and Caution Be sure to follow the instructions on screen messages vary by CAM service described below Incorrect insertion of a Conditional Access Module CAM may damage both the CAM and your TV Notes e This TV supports Cl as well as CI Cl allows service providers to offer premium HD digital programmes with a high level of copy protection e Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module 1 Switch off the TV 2 Follow the directions printed on the CAM and insert the CAM into the Common Interface at the side of the TV 3 Push the CAM in as far as it will go and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot whe
52. picture and sound settings e TV settings Advanced picture and sound settings e _ Search for channels or Search for satellite Guides you through antenna or satellite if available channel installation e _ Channel settings or Satellite settings Advanced channel settings e Update software Guides you through an update of the TV software e _ Software settings Advanced TV update settings e Watch demos Demos of special e The TV requires some time to start up features available with the TV During this time the TV will not respond to the remote control or side controls This is normal behaviour Options Option menus offer convenient settings related to what is on screen 1 Press to see what options are available 2 To exit press B again To switch to standby Press amp on the remote control The front LED indicator switches to red To switch off Press the power switch on the bottom of the TV to the o position The TV switches off 4 hough your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time switch off the TV using the power switch on the bottom of Watch TV the set Switch channels Press rea on the remote control or P CH on the side of the TV To switch on e Ifthe front LED indicator is off press e _ Press W then select Channel list to the
53. power switch 1 on the bottom of use the channel list the TV to the position e Press D to retum to the e If the front LED indicator is red press previously viewed channel on the remote control 2 e _ Enter a channel number using the Alternatively switch on the TV from Numeric buttons standby by pressing any key on the side of the TV Notes e The front LED indicator does not turn on when the TV is switched on EN 19 English To view analogue or digital channels only Filter the channel list to access analogue or digital channels only 1 In the channel list press B 2 Select Select list gt Analogue or Digital then press OK Depending on your selection only digital or analogue channels become available Adjust volume To increase or decrease volume e _ Press on the remote control e Press aa on the side of the TV To mute or unmute sound e _ Press to mute the sound e _ Press amp again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 29 Use Smart picture settings Use the Smart picture experience menu to access frequently used picture settings 1 While watching TV press I0 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus
54. press amp 2 Select Select list gt Favourites to display channels in a favourite list or All to display all channels 3 Press OK to confirm your choice Use EPG Overview The Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e _ View a list of digital programmes being broadcast e _ View upcoming programmes e Group programmes by genre e _ Set reminders when programmes start e _ Setup preferred EPG channels Note EPG is not available in all countries Switch on EPG 1 Press W 2 Select Programme guide then press OK EN 24 EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options Depending on the broadcast service these options are available only for seven or eight days 1 When in EPG press amp 2 Press the Navigation buttons and OK to select and adjust one of the following settings e Set reminder Sets programme reminders e _ Clear reminder Clears programme reminders Change day Sets the EPG day Select Today Next day or Previous day More info Views programme information e _ Search by genre Searches TV programmes by genre e _ Scheduled reminders Lists programmes reminders e Update Programme guide Updates the latest programme information Use timers and locks Sleeptimer Sleeptimer switches the TV to standby after
55. re using a SCART digital channel decoder select the channel to decode and assign the decoder to the SCART connector 1 Press ft 2 Select Setup gt Channel settings gt Decoder gt Channel PC Connect a computer using one of the following cables HDMI cable EN 50 DVI HDMI cable AUDIO IN DVI VGA y DVI HDMI l HDMI cable and HDMI DVI adaptor AUDIO IN DVI VGA VGA cable EN 51 English Use Philips EasyLink Enable or disable EasyLink Philips EasyLink provides several features that enable you to control devices that are connected via HDMI Connected devices must support the HDMI CEC standard and must be properly configured for EasyLink to work Note HDMI CEC functionality is known by other names on other brands Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink To enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt On or Off then press OK EasyLink features With Philips EasyLink enabled the following features are available One touch play When you play content from an HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you connect your TV to an HDMI CEC compliant devi
56. ress OK to begin the search 4 Press until no word or number is highlighted to exit the search Use digital teletext Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels for example BBC1 When in digital teletext e Press the Navigation buttons to select or highlight items e Use the Colour buttons to select an option then press OK to confirm or activate Note Digital text services are blocked when subtitles are broadcast and Subtitles are enabled Read Use more of your TV gt Use subtitles Page 25 Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default EN 23 English To switch Teletext 2 5 on or off 1 Press ff 2 Select Setup gt TV settings gt Preferences gt Text 2 5 gt On or Off then press OK Favourite channels Add or remove channels 1 Press W 2 Select Channel list then press OK 3 Press amp 4 Select Mark as favourite or Unmark as favourite then press OK A star appears in the channel grid indicating that the channel is added to the favourite list The star disappears if you remove the channel from the favourite list Select a favourite list View only channels in a favourite list or view all channels if a favourite list is currently selected 1 In the channel list
57. ress the green button to turn on audio feedback or press the red button to tum it off 3 Press D to exit EN 27 English 4 Set up the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching TV press ft 2 Select Setup gt Quick picture and sound settings then press OK 3 Select Start then press OK Follow the on screen instructions to choose your preferred settings Smart picture settings Use the Smart picture experience menu o access frequently used picture settings 1 While watching TV press IN 2 Select Smart picture then select one of he following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting Cinema Ideal settings for watching movies Game Ideal settings for gaming e _ Energy saving The most energy conscious settings e _ Standard Adjusts picture settings to suit most environments and types of video Factory default settings e _ Photo Ideal settings for viewing photos e _ Custom Allows you to customise and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit EN 28 More picture settings 1 Press ft 2 Select Setup gt
58. rew by adding the thickness of your wall mount to the screw length shown in the graphic min 15mm max 18mm Product highlights Full HD LCD display This TV is equipped with a full High Definition HD LCD display supporting the maximum HD resolution of 920 x 1080p This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colors The LED backlight of the display offers exceptional picture contrast with exceptional energy saving Note Certain models are equipped with an EEFL backlight display only For detailed product information go to http www philips com support To enjoy HD content you must connect to an HD source first otherwise the picture quality will be that of a normal TV See Get started gt Enjoy HD TV gt Full HD content Page 11 Digital TV In addition to normal analogue TV broadcasts your TV can receive digital terrestrial DVB T broadcasts Where available your TV can also receive digital cable DVB C digital satellite DVB S Not supported on all models and digital radio broadcasts O DVB Digital Video Broadcasting gives you a better picture and better sound quality Some digital broadcasters also include several audio speech and or teletext anguages with DVB EPG Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e _ View a list of digital programm
59. ries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times S Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV Risk of injury to children Two people are required to lift and carry a TV that weighs more than 25 kg 55 Ibs When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material h
60. s random play of songs EN 26 Watch video Press the Navigation buttons to select a video file then press OK Press or p to rewind or fast forward a file e _ Press D to exit the content browser During video playback press B to access the following settings e _ Stop Stops playback e Repeat Repeats a video e _ Shuffle on Shuffle off Enables or disables random play of videos Listen to digital radio If digital broadcasting is available digital radio channels are installed automatically during installation 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Select list gt Radio then press OK 5 Select a radio channel then press OK You can listen to satellite radio broadcast if available 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select TV Radio gt Radio then press OK Use Scenea Activate Scenea You can use Scenea to display a picture as wallpaper on your TV Make sure that the location of your TV is set to Home mode 1 Press ft 2 Select Scenea then press OK The default or pre loaded picture is displayed Note If the sleep timer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your TV gt Use
61. s reserved Document order number 313913704071
62. screen button Basic TV menus Home The home menu gives you easy access to connected devices picture and sound settings and other useful features 1 Press ft 2 Select an item in the home menu then press OK to access the menu 3 To exit the home menu press AoD Q N To start an activity select the desired item with the Navigation buttons then press OK e _ Help Accesses the electronic user manual e Watch TV Switches back to the antenna source if another source is selected e _ Browse USB If a USB storage device is connected accesses the content browser e _ Scenea Switches to the Scenea wallpaper e Add your devices Adds new devices to the home menu Note that you must add a new device to the home menu in order to access it e _ Setup Accesses menus that allow you to change picture sound and other TV settings Browse The browse menu gives you easy access to e _ Electronic programme guide e TV channel list e Teletext e MHP application options EN 17 English To access the browse menu while watching TV press W 1 Press the Navigation buttons to select an item e Programme guide Accesses the Electronic Programme Guide e _ Channel list Accesses the TV channel list Text Accesses teletext MHP applications Accesses MHP application options 2 Press OK to confirm your choice Experience Press MN to access the
63. speakers Page 53 when content is played from your Home Theatre System enable EasyLink For more information see Connect the TV gt Use Dig receiver satellite First use two antenna cables to connect the antenna to the receiver and the TV in Antenna Digital receiver I Satellite receiver E Digital receiver l Satellite receiver oo0o0000 O Dig receiver and DVD R First use three antenna cables to connect the digital receiver and the DVD Recorder to the TV C Antenna Digital TV receiver nk 150 ar TV ANTENNA EN 45 English Then use a SCART cable to connect the digital receiver to the TV a Digital receiver v i Satellite receiver oo00000 O Dig receiver DVD R and HTS First use three antenna cables to connect the two devices and the TV C Antenna Digital TV receiver pvD Recorder oS EN 46 Then use two SCART cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV eZ Scart Finally use a digital audio cinch cable to connect the Home Theatre System to the TV o Digital Audio TV DVD Home Theatre System 8 Digital Audio oo0oo0000 O a n x AN Digital Audio p Out EN 47 English Dig HD receiver First use two antenna cables to connect the Digital HD receiver to the TV CG Antenna Digital receiver me m f ennn O O O M ee ee ee ma pigital HD receiver
64. ss the green button and select Energy saving smart se ting e Ambient light sensor To save energy the built in Amb the brightness of the surrounding ient light sensor lowers the TV screen when light darkens e Mute screen Turns off the TV display Other functions including sound continue to operate normally Muting the screen saves energy if you just want to listen to audio from the TV See Set up the TV gt Change other settings gt Energy efficient settings Page 36 for more information Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Built in energy efficient settings e _ Low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level without losing out on the constant standby functionality e Dedicated power switch Completely cut off power to the TV with the dedicated power switch located on the bottom of the set e Advanced power management The advanced power management of this TV ensures the most efficient use of its energy To view how your personalised TV settings affect the TV s relative power consumption press ff and select Setup gt Watch demos gt Active Control Your pr
65. t TV location Page 36 for more information Sound issues There is a picture but sound quality is poor If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e _ Check that the volume is not set to 0 e _ Check that the sound is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the DMI CEC enabled EasyLink compliant TS device Sound should be heard from the HTS speakers v There is a picture but the sound quality is poor Check that the sound settings are correctly set There is a picture but sound comes from one speaker only Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices ote that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e Ifthe TV does not recognise the HDMI device and no picture is displayed try switching the source from one device o another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e _ If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO L R or AUDIO IN mini jack onl
66. t picture and sound settings Channel installation settings remain the same 1 While watching TV press ft 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset back to the factory default Start a TV demo Start a demo to find out more about your TV s features Note Demos are not supported on MHEG channels 1 While watching TV press ff 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press D to exit the demo Change channel settings Reorder channels After installation you may want to reorder the channel list to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Reorder then press OK 5 Select the channel to reorder move it to the desired location then press OK 6 Select Insert to insert the channel into the desired location Swap to swap location with another channel or Cancel to cancel the reorder 7 Press OK to activate Rename channels After installation you may want to rename channels to suit your preference 1 While watching TV press W 2 Select Channel list then press OK EN 29 English 3 In the channel list press B 4 Select Rename then press OK 5 In the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once c
67. t startup If you do not want this message to appear 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Channel installation gt Channel update message gt Off then press OK e _ To disable automatic updates In the Channel installation menu select Automatic channel update gt Off Other options Select audio language If the TV channel has multiple or dual sound broadcast you can select the preferred audio language 1 While watching TV press amp e Audio language Select the audio language for digital channels e _ Dual I II Select the audio language for analogue channels Select video stream for DVB S channel only If available you can view different video stream of the channel depending on broadcast service provider 1 While watching TV press B 2 Select Video selection to view the various selections Install channels Automatic install When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and install all available TV channels Note If you are prompted to enter a code enter 8888 1 Press ff 2 Select Setup gt Search for channels then press OK 3 Follow the on screen instructions to complete the channel installation 4 Once complete select Finish then press OK Tip Press W to see the channel list Not
68. ta from the device You can access the USB content browser using one of the following methods e When watching TV connect the USB device to the USB port on the side of your TV e Press ff Select Browse USB then press OK View slideshow Press the Navigation buttons to select a picture then press OK EN 25 English e To pause or stop playback press OK again e To jump to the previous or next file press m or m e _ Press D to exit content browser Press B to access or exit the following settings e _ Show info Displays the file information e _ Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e _ Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e _ Slideshow speed Sets the display time for each picture in the slideshow e _ Slideshow transition Sets the transition from one picture to the next e Setas Scenea Sets the selected picture as wallpaper on the TV Listen to music Press the Navigation buttons to select a music track then press OK e _ Press a to fast rewind or fast forward a track e Press D to exit content browser Press E to access or exit the following settings e _ Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e _ Shuffle on Shuffle off Enables or disable
69. ter or storage device in that network Once the network is installed select Browse PC in the home menu to view PC content What you need WARNING This TV complies with the EMC directive only when you use a shielded Cat5 Ethernet cable To connect the router to your TV we strongly recommend that you use an Ethernet cable that is shorter than 3 metres To connect the TV to a PC network and the Internet you need a router in your PC network Set the router to DHCP On Connect the router to the TV with a network Ethernet cable The PC network feature is DLNA 1 5 certified You can use Microsoft Windows XP or Vista Intel Mac OSX or Linux on your computer To share PC content on your TV you need recent media server software on your computer Windows Media Player 11 or similar The media server software needs to be set to share files with your TV For a list of supported media server software read Technical data gt Multimedia Page 61 Note If the apparatus does not return to DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Wired installation Connect the router to the TV using a network cable and switch on the router before you start the network installation To start the wired network installation close he user manual press ff gt Setup gt Connect to network and press OK Follow the instructions on screen to inst
70. timers and locks gt Sleeptimer Page 24 Set a picture as Scenea Note The file size of the picture must not be more than 1 MB 1 Connect the USB storage device to the TV 2 Press ft 3 Select Browse USB then press OK 4 Select a picture then press B 5 Select Set as Scenea then press OK 6 Select Yes then press OK 7 Press any key to exit Scenea Universal access Enable universal access Where supported by your digital TV broadcaster this TV allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must tum on universal access in the Preferences menu 1 Press ff 2 Select Setup gt TV settings gt Preferences gt Universal access gt On then press OK Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired To switch on hearing impaired audio and subtitles if available 1 While watching TV press B 2 Press the red button to select Hearing impaired 3 Press the green button to switch on hearing impaired audio and subtitles press the red button to switch it off 4 Press D to exit Tip To verify whether a hearing impaired audio language is available press B and select Audio language Languages with an ear icon indicate hearing impaired support Visually impaired Some digital TV chan
71. to the left of the screen with teletext on the right e _ T O P overview Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers e Enlarge Normal view For more comfortable reading you can enlarge the teletext page Press the Navigation buttons to move around the enlarged screen e Reveal Hides or reveals hidden information on a page such as solutions to riddles or puzzles e _ Cycle subpages Cycles through subpages automatically if subpages are available e Language Switches to a different language group to display a language correctly when that language uses a different character set 3 Press B to exit the options menu Select a teletext language Some digital TV broadcasters have several teletext languages available You can set your primary and secondary language 1 Press ft 2 Select Setup gt Channel settings or Satellite settings gt Languages gt Primary Text or Secondary Text 3 Select your preferred teletext languages then press OK Select subpages A teletext page number can hold several subpages These subpages are shown on a bar next to the main page number When available on a teletext page press or to select subpages Search teletext 1 When in teletext press OK to highlight the first word or number 2 Press the Navigation buttons to skip to the word or number to search 3 P
72. ur TV to audio from a connected Home Theatre System 1 While watching TV press ff 2 Select Setup gt TV settings gt Preferences gt Audio Out delay gt On then press OK TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press amp 2 Select Status then press OK The clock is displayed on the bottom right hand corner of the TV screen Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Coordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving EN 36 1 While watching TV press ff 2 Select Setup gt TV settings gt Preferences gt Clock gt Auto clock mode 3 Select Automatic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled for your time zone Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date
73. with at east 256 MB of storage space ave access to a computer with a USB port and internet access 1 Press ft 2 Select Setup gt Update software then press OK The update assistant starts Follow the on screen instructions to complete the update Note If you already have the upgrade file downloaded onto a USB flash drive connect it to the TV Then select Setup gt Software settings gt Local updates On screen Help Before updating the on screen Help ensure you have the following e An empty USB flash drive The USB flash drive must be FAT or DOS formatted e Do not use a USB hard drive e APC with Internet access e An archive utility that supports the ZIP file format for example WinZip for icrosoft Windows or Stufflt for acintosh Before updating Help check the current version installed on your TV If the version of Help on your TV is lower than the version available at www philips com support download and install the latest Help file 1 Press ff 2 Select Help then press OK On screen Help is displayed 3 Select Technical data gt Dimensions Navigate to the last page of this section and note the version number Note The version number is a 12 digit number where the last digit indicates the version of Help installed on your TV For example if the version on the TV is 3139 137 03583 3 represents the version of Help currently installed 1 Ins
74. wonky Media v4 4 2 on Macintosh OS X Enable media sharing In Mac OS X start Twonky Media Twonky Media appears In the Basic Setup box click Clients Security Clients Security settings appear Click Enable sharing for new clients automatically then click Save Changes Media sharing is enabled Add folders for media sharing In the Basic Setup box click Sharing Sharing settings appear Click Browse to add a folder location Click Add new content directory to add more folders When all folders are added click Save changes then click Rescan content directories Media files are ready to be accessed from the TV Microsoft Windows Media Player 11 Note The instructions are applicable to both Microsoft Windows XP and Vista Enable media sharing In Microsoft Windows start Windows Media Player 11 Windows Media Player appears In the Media Sharing window tick Share my Media and click OK If no network connection is found and you are unable to tick this box click the Networking button to show the Network and Sharing Centre window Set Network discovery to On Set File sharing to On Go back to the Media Sharing window in Windows Media Player and tick the Share My Media box Click OK When the TV is connected by the router to the PC and everything is switched on the Media Sharing window will detect the TV as an Unknown Device Select the device and click Allow To change particular sett
75. y You cannot use EasyLink features Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If an HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased This behaviour is normal when an HDMI CEC audio device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the TV e _ Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV causing poor playback PC connection issues The computer display on the TV is not stable e _ Check that your PC uses the supported resolution and refresh rate e _ Set the TV picture format to unscaled EN 59 English 7 Technical data Overview Product information is subject to change without notice For detailed product information go to www philips com support Power and reception Power e Mains power AC220 240 V 50 60 Hz e Ambient temperature 5 C to 35 C e For power and standby power consumption see the product spe

Download Pdf Manuals

Related Search

Related Contents

Southbend SB1269 Lathe User Manual  Panasonic 19RTVN  DVD/USB AV NAVIGATION SYSTEM  Télécharger - MBSR montpellier  KIT CENTRAL 8 USER'S GUIDE - Future-bike  Elite Screens InstaRP 2 114"  Bissell BGSV6000T Use and Care Manual  Guía Referencia Rápida Terminales Serie 5000  

Copyright © All rights reserved. Failed to retrieve file