Eminent EM6575 siren
Contents
1. 4 Fill in http e Centre in the address bar of your web browser and press the Enter key on your keyboard 5 The openings screen of the Eminent e Centre will be shown 6 Click e Domotica products 7 Click the Add button The e Centre will start to search for new e Domotica devices 8 Press the Link button in the middle of the battery compartment on the EM6575 at least three times within 1 5 seconds 9 A sound will be heard Also a message will appear Product found 10 Give the connected and found device a name and choose a location and click Save 11 The EM6575 has now been added to the e Centre The e Centre will now be able to control the EM6575 2 4 Mounting the EM6575 to the wall The EM6575 is extremely suited to be mounted to a wall Use the following steps to mount the EM6575 1 Take the back plate and mark the three drilling holes on the wall 2 Drill the three holes and fill them with the supplied plugs 5 ENGLISH 3 Then take the back plate and make sure the three holes in the back plate correspond with the three drilling holes 4 Fix the back plate using the three supplied screws 5 Slide the EM6575 onto the back plate Use the screw on the bottom of the back plate to secure the back plate to the EM6575 3 0 Adding scenarios Once the EM6575 has been added and has been assigned you can add a scenario to this device In the following example we will be2. EMINENT EM6575 Wireless indoor siren WWW EMINENT ONLINE COM 2 ENGLISH EM6575 Wireless indoor siren Warnings and points of attention Due to laws directives and regulations set out by the European Parliament this device could be subject to limitations concerning its use in certain European member states In certain European member states the use of this product could be prohibited More information regarding this warning can be found in the Declaration of Conformity on the last page of this document Table of contents OM feeder EAE dacelscttdctestcetctenseasuieesdacshaettshcoettahet satteyetcsssecehartestcsaas 2 1 1 Functions and features mse 1 2 Packaging contents eid 1 3 Explanation of the EM6575 nnen venseneneeennenensvenenenneernenenseerenen 3 2 0 Using the EM6575 siren unne ennen eennenennerenerenneeeneeenvernenenereneeenvenenveen 3 2 1 Preparing the EM6575 for usage nanne eene nenneenereneeeneeenvenenveen 3 2 2 Assigning the siren to the Eminent e Gentre nennen enn eenneeenvereneenn 3 2 3 Adding the siren to the already installed e Gentre nennen eenen 4 2 4 Mounting the EM6575 to the wall annen eenen nenneennenennereneeenvenenvenn 4 320 AdGING Wcier Inl slo 5 3 1 Creating Siren On and Siren Off scenario 5 3 2 Adding the siren to an alarm scenariO annees nenneenenenneeeneeenvenenveen 5 3 3 Using the e Gentre nnn vennereneeenvereneeeenerenveeneneneennveenvenenve
3. gal rights can be derived from these contents Eminent cannot be held responsible nor liable for the information contained in this document Eminent is a member of the Intronics Group EM6575 02 2010
4. M6575 2 Link button 3 Jumper near link key ON means high volume 4 Jumper near DC socket ON means tamper setting enabled 5 DC socket Used to connect the optional power supply 2 0 Using the EM6575 siren 2 1 Preparing the EM6575 for usage 1 Take the EM6575 out of the packaging 2 Remove the backplate from the battery compartment 3 Insert the batteries into the battery compartment 2 2 Assigning the siren to the Eminent e Centre There are two situations possible when assigning the siren to the Eminent e Centre 1 You assign the siren to the Eminent e Centre during the installation process of the e Centre itself The installation wizard of the e Centre will move along the necessary steps during the installation process of the e Centre itself meaning 4 ENGLISH you can add all your e Domotica devices through the e Centre s own website http e Centre For this installation you have to follow the steps shown on screen You have to press the Link button when e Centre is searching for devices You can add your siren to the already installed e Centre This is described in chapter Adding the siren to the already installed e Centre N 2 3 Adding the siren to the already installed e Centre 1 Make sure the EM6575 is in range of the e Centre 5 meters maximum 2 Make sure your computer is completely started 3 Open your computer s web browser
5. d of warranty is measured from the moment of purchase by the product s first owner The Eminent warranty applies to all Eminent products and parts inextricably connected to and or mounted on the main product Power supply adapters batteries antennas and all other products not integrated in or directly connected to the main product and or products of which without reasonable doubt can be assumed that wear and tear show a different pattern than the main product are not covered by the Eminent warranty Products are not covered by the Eminent warranty when subjected to incorrect improper use external influences and or when opened by parties other than Eminent 7 0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e mail message to info eminent online com You can also send a letter to Eminent Computer Supplies P O Box 276 6160 AG Geleen The Netherlands 8 ENGLISH Clearly state Declaration of Conformity and the article code of the product of which you would like to obtain a copy of the Declaration of Conformity EMINENT WWW EMINENT ONLINE COM Trademarks all brand names are trademarks and or registered trademarks of their respec tive holders The information contained in this document has been created with the utmost care No le
6. en 5 4 0 Frequently asked questions nnen ennen eenneennerenneenneeennerenenenereneeenverenveen 6 5 0 Service and support a vennenenevennenenevennenenevenenenevennenensvensenenneennenendeernenen 6 6 0 Warranty conditiONS szine iaire aaa oan aE AEEA 7 7 0 Declaration of Conformity nennen enn eennenenneennerenneeeneeenveerenenerenveenverenveen 7 1 0 Introduction Congratulations with the purchase of this high quality Eminent product This product has undergone extensive testing by Eminent s technical experts Should you experience any problems with this product you are covered by a five year Eminent warranty Please keep this manual and the receipt in a safe place 1 1 Functions and features The EM6575 wireless indoor siren is an ideal addition to your e Centre and your security system The EM6575 can be assigned to the e Centre and you can create you own scenarios For example You can setup the EM6575 Wireless indoor siren to sound the alarm the moment the EM6570 door contact has been triggered The 3 ENGLISH EM6575 gives you a warning by using a loud sound signal and by flashing a red strobe light This way everybody inside the building will be warned Thanks to the repeater function of e Domotica switches and dimmers the EM6575 can be used everywhere in your house or building 1 2 Packaging contents e Eminent EM6575 Z Wave Siren e _ 4 batteries Manual 1 3 Explanation of the EM6575 1 Tamper button of the E
7. ess the OK button 3 The e Centre will start to count down Once the count down has been finished the e Centre is armed If the EM6570 is triggered the alarm of the EM6500 and EM6575 will sound 4 To interrupt the sound alarm of the EM6500 and EM6575 fill in your pin code again and press the OK button The sound alarm will stop If you do not interrupt the sound alarm yourself the sound alarm of the EM6575 will stop after 3 minutes 4 0 Frequently asked questions Q The assigned e Domotica devices all function wirelessly However some devices which are far away from the e Centre do not always seem to be working How can solve this issue A You can login to the e Centre and choose the Optimize function This way supported devices will activate the repeater function Using this function devices will pick up each others wireless signal and broadcast this signal forward This way you will have an almost unlimited wireless range Q In the battery compartment can see two jumpers Where are these jumper used for Al Using the jumper nead the DC socket you can set the tamper setting With jumper the tamper setting is set to On If tamper setting is On it means the sound alarm will be triggered when the EM6575 is removed from the backplate 3 minutes after the jumper has been set the tamper alarm will become active A2 Using the jumper setting near the link button you can set the sound v
8. olume With jumper the volume setting is high 100dB Without jumper the sound volume will be set to low 90dB Q If want to use a power supply instead of batteries What kind of power supply can use A You can use a 6V dc 600mA power supply Q Is the EM6575 usable in outdoor situations A No the EM6575 is an indoor wireless siren The EM6575 is not designed for outdoor conditions 5 0 Service and support This users manual has been carefully written by Eminent s technical experts If you have problems installing or using the product please fill out the support form at the 7 ENGLISH website www eminent online com support You can also contact us by phone Below you will find a list with phone numbers for each supported country Country Phone number Rate per minute Belgium Dutch 070 277 286 0 30 Belgium French 070 277 286 0 30 Denmark 45 69918565 Local Costs Finland 35 8942415826 Local Costs Germany 1805 982 234 0 14 Italy 39 0240042016 Local Costs Norway 47 21075033 Local Costs Spain 807 080 042 0 41 Sweden 46 840 309985 Local Costs The Netherlands 0900 3646368 0 45 UK 905 871 0013 Local Costs Rates mentioned in this table do not include cell phone charges 6 0 Warranty conditions The five year Eminent warranty applies to all Eminent products unless mentioned otherwise before or during the moment of purchase When having bought a second hand Eminent product the remaining perio
9. using the EM6570 door sensor in combination with the EM6575 wireless indoor siren Once the EM6570 door sensor is triggered the EM6575 will give a sound alarm and the red strobe lights on the device itself will flash The EM6500 e Centre itself will also sound an alarm Use the following steps to create scenarios 3 1 Creating Siren On and Siren Off scenario Click Add scenarios Click Add Fill in a name at Name In this case Siren On Select the EM6575 at Device Select Turn on at State Click Save Click Add Fillin a name at Name In this case Siren Off Select the EM6575 at Device Select Turn off at State Click Save ee ae ee O 3 2 Adding the siren to an alarm scenario Click Setup alarmsensors Click Setup away alarm In the box Not Selected the EM6570 door sensor is listed Click the EM6570 and click the blue arrow The EM6570 will now be listed in the box Selected Click Save Click Assign alarmscenarios Click Away alarm Select Siren Off at Alarm disarmed Select Siren On at Alarm triggered PONS Oo NoN 3 3 Using the e Centre In order to set the alarm on the EM6500 itself use the following steps 6 ENGLISH 1 Press the Security button on the e Centre 2 Your pin code will be asked Fill in your pin code and pr
Download Pdf Manuals
Related Search