Lenco LED-2213
Contents
1. If you want to rename the channel use the UP DOWN keys to select program Name and press OK the program name dialog will shown as below Use the UP DOWN or LEFT RIGHT button to move the cursor to the character you want character and press the OK button to select When editing is complete move the cursor to OR and press the OK button Delete all Press the BLUE key and input the password you can delete all channels 30 Program Name FujianTV1 Down Frequency 03705 Symbol Rate 04414 Video PID 0160 Audio PID 0080 puman preme ia 0 p p v Back Space Channel Manager Program Name Enter PIN FujianT V1 FujianRadio1 Satellite Euj AMEVAA Program No 175 Local Frequency 5150 Polarity Vv 22K Tone OFF DiSEqC OFF l 9 i JI KL Y eX GS Tg Y a A Move Del Skip Delete all 1 3 2 Favorites Manager Press the UP DOWN keys to select the channel Press the LEFT RIGHT keys to select the ReVeres venager favorite group Press the OK button to add the selected channel to the Favorite group To 175 FujianTV1 176 FujianRadiot remove the channel from the favorite group 177 Hebei TV repeat same operation ARNO Press RED key you can sort the channels by Satellite Edit name different satellites Press GREEN key you can edit the favorite group name 1 3 3 Remove Satellite Press the UP DOWN keys to select the satellite Remove Satellite Hebei TV2. Lenco INSTRUCTION MANUAL 22 55 5cm Full HD LED TV WITH DVB S Model No LED 2213 For information and support www lenco eu Contents 1 3 5 6 8 11 12 13 14 21 21 35 36 37 SAFETY INFORMATION Unit Remote Control Aerial connection Connecting external devices Auto installation setup Source menu Menu settings DVBS Operation TROUBLE SHOOTING GUIDE TECHNICAL SPECIFICATIONS SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY BEFORE USE Take note of the following safety information which appears on the back of the TV COVER SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 1 CAUTION TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE ANY This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit Keep these instructions e Do not use this TV near water e Clean only with a slightly damp cloth e Do not block any ventilation openings e Install in accordance with the supplied Quick Start Guide and this User Guide e Protect the power chord from being walked on or pinched particularly at plugs and the point where it exits from the TV e Do not allow the power chord to overhang the edge of a table e Unplug this TV during lightening storms or when unused f
3. CHANNEL COUNTRY AUTO SEARCH MANUAL PROGRAM PROGRAM EDIT SOUND MENU Allows you to customize the sound options and effects SOUND MODE STANDARD BASS I sci TREBLE BALANCE AVI FUNCTION MENU Allows you to set up a variety of lock time and setup options FUNCTION SLEEP TIMER OFF ASPECT FULL TT LANGUAGE WEST BLUE SCREEN 4 ON SYSTEM LOCK FTI PICTURE MENU Allows you to make adjustments to your picture settings PICTURE PICTURE MODE q STANDARD CONTRAST BRIGHTNESS COLOR L TINT C SHARPNESS C E COLOR TEMP q NORMAL NOISE REDUCTION 4 SETTING MENU Allows you to setup a variety of setup options Note Use the left right up down navigation buttons to select the required options in the menus 13 p a 0 I U 50 o0 SG Menu Settings continued CHANNEL COUNTRY AUTO SEARCH MANUAL PROGRAM PROGRAM EDIT Use the 4 and P buttons to select the CHANNEL menu as the picture above press w button to enter the menu The CHANNEL menu includes the following options Country Press and buttons to select the Country Can be selected in ATV mode Auto Search Press button to start auto search Auto Search menu for ATV Manual Program Press button to enter the submenu Manual Program menu for ATV PROGRAM COLOR 8YS PAL SOUND SYS A G MANUAL SEARCH i B7 LAMHZ FINE SKIP Program Select the program you want to edit Color
4. the volume of the program automatically when you turn on the function by selecting On 17 Menu Settings continued LANGUAGE OSD TIMER IRANSPARENCE OVERSCAN RESET ENGLISH 3U SEG ON Use the and P buttons to select the SETTING menu as the picture above press w button to enter the menu The SETTING menu includes the following options I Language OSD Timer Transparence Overscan Reset Allows you to select menu language Allows you to select the time for OSD menu displays on the screen Allows you to select the transparence for OSD menu displays on the screen Turn on off the overscan funciton Can be selected in HDMI mode Press button to restore factory default 18 Menu Settings continued FUNCTION SLEEP TIMER ASPECT TT LANGUAGE BLUE SCREEN SYSTEM LOCK FTI Use the 4 and P buttons to select the FUNCTION menu as the picture above press w button to enter the menu The FUNCTION menu includes the following options EEEiIeo JS lt lt kKkK f f l e oro Sleep Timer Aspect TT Language Blue Screen System Lock System Lock Child Lock Key Lock Parental Change Code FTI First Time Installation Allows you to setup the sleep timer to 15min 30min 45min 60min 75min 90min 105min 120min and off Allows you to select the screen display mode Can be selected
5. 201 Ku_Yamalt02_ 201 1 1 1 2 Transponder You can select the current Transponder or add the new Transponder 1 1 1 3 Local Frequency You can change the local frequency Note You must press OK to save this local frequency when the cursor is on the Local Frequency item before you select another satellite 1 1 1 4 22K Tone You can change the 22k tone Press LEFT RIGHT select OM OFF or AUTO Note You must press OK to save this 22K tone when the cursor is on the 22K Jone item before you select another satellite 1 1 1 5 Polarity You can change the polarity Press LEFT RIGHT select 73V 78V 73 78V or OFF Note You must press OK to save this polarity when the cursor is on the Po arity item before you select another satellite 1 1 1 6 DiSEqC Switch You can change DiSEqC Switch Press LEFT RIGHT select LVB87 LNB2 LNB3 LNB4 or OFF Note You must press OK to save this DiSEqC Switch when the cursor is on the DiSEgC Switch item before you select another satellite 1 1 1 7 Antenna mode You can change the Antenna mode Press LEFT RIGHT select Fixed Goto x or DISEGC7 2 When you select Goto x Press OK to enter the submenu of the Adjust Antenna Press UP DOWN to move the curser to the item of the 7ransoonder Press LEFT RIGHT to select the current transponder Press UP DOWN to move the curser to the item of the Satellite Longitude Input the data of the Satellite Longitude and press LEFT RIGHT select Easfor West Press UP DOWN to
6. A Update by DEV e Update by DVBS You can update your STB software by USB Ta Select System Update Update by DEV you ae can select update software from USB disk and A Misc press OK key to update your DVBS siii 27 1 2 4 System info The system information displays information about your receiver such as software hardware and date 1 2 5 Timer You can set the timer to make the receiver perform designated actions Schedule Today 2007 0401 00 39 Use the UP DOWN buttons to select timer Taskisainactive Action 4 Power off gt Task2 Inactive Mode 4 Stop gt Press the LEFT RIGHT key to Task3 Inactive Start Date Y M D 01 01 2007 activate inactivate current timer Press the OK TARE Stare Time Task5 Inactive End Time button to enter your selected timer settings Taske Inactive Channel Type lt Task7 Inactive Channel Name FujlanTV1 gt Action You can select the following functions TaskB Inactive Task9 Inactive Inactive activ Edit Time interval The receiver switches on at the designated date and time displays the channel and then switches off at the designated date and time The value set at the end time Cycle You can set the cycle of the action designated in the timer mode one time Daily or Weekly Start Date You can set the start date of the timer action Start Time You can set the start time of the timer action End Time You can set the end time of the channel viewing when the Timer m
7. Blind Scan When you select NIT Searching press OK to enter the progress of the NIT Searching 23 1 1 2 Auto Scan Press UP DOWN key to move the curser to the Satellite Scan 001 Hotbird 27500 satellite you want to select and press OK to Parenter 29900 003 Ku_Arabsat2A 2C 27500 mark or unmark 004 C_Arabsat 2B 28000 005 Ku_Arabsat 2B 27500 006 AsiaSat 3S 03333 Press the RED button to scan all channel of the e ni 008 _Yamal 102_201 27500 marked satellite 009 Ku_Yamal102_201 27500 Press the GREEN button to Blind Scan the Scan all channel Blind Scan Scan free channel marked satellite Press the YELLOW button to scan free channel of the marked satellite Scanning User add TV List No 0013 Radio List No 0007 XJTV 1 XJ Radio 1 XJTV 2 XJ Radio 2 XJTV 3 XJ Radio 3 XJTV 4 XJ Radio 4 XJTV 5 XJ Radio 5 XJTV 10 XJ Radio 6 01069 MHz Symbol Rate 00000 K Baud SSS Frequency 1 1 3 Transponder Manager In this menu you can add edit and delete the NewsatS Hotbird transponder you can search transponder 1 1 3 1 Satellite You can select the satellite 1 1 3 2 Frequency You can select the frequency Frequency Polarity Symbol Rate NIT Searching Free PID Search OK EE 03705 Vv 04414 NO NO OK Nilesat Ku_Arabsat2A 2C C_Arabsat 2B Ku_Arabsat 2B C_AsiaSat 38 Ku_AsiaSat 38 Yarnal 102_ 201 Ku_Yamali02_ 201 Press RED button to enter Add ransponder submenu y
8. NMTV H NMTV M CHINIC 10K 104 DVT Ollio DA EHEZIONI I4EGKe Y4cEUAEO 01 Newsat6 X Press the OK button to remove the satellite from the database OON a da UOUN 1 4 Multimedia In this menu you can view My Album play My Music My Movie play Gomoku game rMy Album i and view Calendar from a USB key inserted My Music into the USB slot My Movie Gomoku Calendar 31 1 4 1 My Album Select My Album 7 press the OK key then 1720 x 576 100 press BLUE key Use the A V gt keys to ter select a picture by thumbprint To change Now Program Nar Move Del Ship Folder press the Blue key i war 1 Press the OK key to play selected picture ipo full screen Files can also be selected by di number keys and pressing the OK key virili Colour keys provide a range of additional DI sme options Red zoom Green mp3 play Yellow Mo horizontal and Blue Mp vertical 2 Press OK again and all pictures in the folder selected will play once with automatic effects 3 Whilst playing press any RCU key to view colour key options Red Pay Stop Green mp3 play Yellow Repeat Once and Blue Fast Medium Slow LOK Sido ETD Ai 1 4 2 My Music Select My Music and press the OK key Select folder through Menu structure on the left 00 21 01 01 2007 of screen Use the the A W keys to select an mp3 file Press the OK key to play selected file Press the Red key to Pla
9. OTV 9 CCTV F CCTV E hnstv jykaton a Satellite A Z a d al py Free Pay Back ie a Rl HK D NASAS TW piz cHNA Wiencihants Barik 1500 nat 1 30 Pe Geithus Press YELLOW button to sort program by Free Pay to select easy program you want Press BLUE button to go back the screen before sorted 2 2 System Information In normal operation status no menu operation INFO button the press the Program Information menu will appear on screen In this menu the user can view the current program information 2 3 EPG Electronic Program Guide The EPG shows the event information on the current TP channel by time zone With MENU off press the EPG button The EPG Menu will appear Press UP DOWN to choose the channel Press RED key to show the EPG schedule of the current channel In EPG schedules menu Press the UP DOWN keys to choose the schedule items Press LEFT RIGHT or P P into next previous day s schedules Press GREEN KEY to show the details of this item 34 03771MHz 9375Ks s V VPID 1260 APID 1220 PPID 8190 SPID 402 Audio 1 TPID 0 TFI NRJ12 LCI Eurosport France TPS STAR NRJ12 LCI Eurosport France 04 50 06 25 TF JEUNESSE 06 25 06 30 M T O Detail Info 0244 TF1 2006 06 16 Today EEES Sun Mon Tues Wed Thur 08 25 08 30 METEO Record Detail You can set up the event timer by pressing RED key in the EPG schedule screen To set up an time
10. Sys Select the color system for the program you want to edit Sound Sys Select the sound system for the program you want to edit Manual Search Use q and gt button to manual search AFT Turn on off the Auto Frequency Tuning function for Manual Search Fine Use and gt button to fine tune Skip Select Yes to skip the program when you scan the programs by CH 14 Program Edit Press button to enter the submenu as the following picture Program Edit menu for ATV PROGRAM EDIT MOVE MENUS S E NAME Select the channel press GREEN button on the remote control to change the name of the channel Use 4 gt V Abutton to name and press OK button to confirm LOCK Select the channel press RED button to lock the channel You have to enter the code to view the channel you have locked Note you could set the code in System Lock menu in FUNCTION menu the original code is 0000 INSERT Select a channel you want to insert press YELLOW button then select the position press GREEN button to insert or you could press RED button to cancel the option FAV Press blue button to add the channel FAV list 15 Menu Settings continued PICTURE PICTURE MODE STANDARD CONTRAST BRIGHTNESS COLOR TINT SHARPNESS COLOR TEMP NOISE REDUCTION ON LP MOVIE 2 SELECI MENULIS GS Use the 4 and P buttons to select the PICTURE menu as the picture above press w button to enter the menu The PICT
11. URE menu includes the following options Picture Mode Choose from Standard Movie Vivid and Personal Note Contrast Brightness Color and Sharpness can only be adjusted in the Personal mode option in the Picture Mode Settings Contrast Controls the difference between the brightest and darkest regions of the picture Brightness Controls the overall brightness of the picture Color Control the color Sharpness Increase this setting to see crisp edges in the picture decrease it for soft edges Tint Controls the tint NTSC mode only Colour Temp Choose from Normal Cool and Warm Noise Reduction Reduce any interference noise by selecting ON Can be selected in ATV mode 16 Menu Settings continued SOUND MODE BASS TREBLE BALANCE AVL Use the and P buttons to select the SOUND menu as the picture above press w button to enter the menu The SOUND menu includes the following options a Ohoho5o5o5o5o5o5o5oeoeceEeoEAMM gt gt gt IIGIGI IEpD Sound Mode Allows you to select among Standard Music Movie and Personal Bass Can be adjusted when the sound mode is set to User Controls the relative intensity of lower pitched sounds Treble Can be adjusted when the sound mode is set to User Controls the relative intensity of higher pitched sounds Balance To adjust the balance of the left and right sound track or turn off the volume of the left and right sound track AVL Control
12. atus with Class 1 construction shall be connected to a mains socket outlet with a protective earthing connection Keep away from rodents Rodents enjoy biting into electric flexes Always hold the plug when pulling out the plug from the mains supply socket Do not pull on the flex the flex can become overloaded and cause a short circuit Set up the unit so that no one is able to trip over the flex Do not place heavy items on the flex which may damage it Take note that the flex cannot be reached and pulled by young children avoiding injury Do not set up the unit near to heat sources The casing and the flex could be damaged by the impact of heat The screen is made of plastic and can break if damage is done to it Be careful when collecting sharp edged plastic splinters to avoid injury Avoid placing the unit on any surfaces that may be subject to vibrations or shocks To protect the unit during a thunderstorm unplug the AC power cable and disconnect the aerial Caution Do not touch the aerial RF connector When you leave your home for long periods of time unplug the AC power cable for safety reasons The unit becomes warm when in operation Do not place any covers or blankets on the unit in order to prevent overheating The ventilation holes are not to be blocked Do not set up near radiators Do not place in direct sunshine When placing on a shelf leave 5 cm 2 free space around the whole unit Do not allow water or moisture to
13. creen resolution and select 60Hz refresh rate Switch off your PC then connect it to your TV while both appliances are still switched off VGA HDMI PC Connection Use a PC VGA cable not supplied to connect the TV to your PC You can also use an HDMI cable to connect to your PC if your PC Graphic card supports HDMI When the HDMI cable is used the PC audio cable is no longer required If you use the HDMI to DVI cable you will need to use the PC audio cable Connect all cables carefully and do not bend or break the connector pins When using the VGA cable e Switchon the TV VGA cable e Switchon the PC VGA e Select PC VGA as input source HDMI to DVI cable v S x gt When using the HDMI cable un Audio cable e Select HDMI as input source on inline C E 2 HDMI All illustrated cables are not supplied Connecting external devices continued Connecting Video camera and Video recorder Video camera e Connect the AV cable to the TV and to the video camera e Turn on both video camera and the TV e Select AV CVBS source e You can now see the playback picture from the video camera e Toconnect the video camera using other cables refer to the video camera Instruction manual Video recorder e Connect the Scart cable to the TV and video recorder e Turn on both video recorder and the TV e Select Scart source e You can now see the playback picture from the video recorder e T
14. enter the TV Do NOT use in wet or moist areas such as Bathrooms steamy kitchens or near swimming pools Do not use this unit when moisture condensation may occur Any repairs must be carried out by qualified personnel only Do not open this unit A non expert attempting to repair the unit could be dangerous and potentially cause a fire hazard IMPORTANT SAFETY INFORMATION continued e Liquids spilt into the unit can cause serious damage Switch the set OFF and disconnect the mains power supply then consult a qualified service person before attempting to use the unit again e Do NOT remove the safety covers There are no useable or serviceable parts inside You may invalidate the warranty Qualified personnel must only service this apperatus e Do NOT tap or shake the screen you may damage the internal circuits Take good care of the remote control do not drop e Never place hot objects or open flame sources on or close to the TV e High temperatures can melt plastic and lead to fires e TocleantheTVusea soft dry cloth Do NOT use solvents or petrol based fluids For stubborn stains you may use a damp cloth with dilute detergent Headphone Warning Loud music can damage your hearing irreversibly therefore do not set the volume to a high level when listening through headphones particularly for lengthy listening periods Where to install Locate the television away from direct sunlight and strong lights soft indirect lightin
15. g is recommended for comfortable viewing Use curtains or blinds to prevent direct sunlight falling on the screen Place the TV on a sturdy platform of which the surface should be flat and steady This will prevent it from falling over Make sure the television is located in a position where it cannot be pushed or hit by objects as pressure will break or damage the screen and so that small objects cannot be inserted into the ventilation slots or openings in the cabinet Unit and Accessories OOO00 0 0 MENU CH CH VOL VOL INPUT POWER LED Indicator Remote Control Window keep clear The functions of the TV buttons are described below MENU Press to display the OSD menu Press again to exit the menu CH CH Press to scan through channels They are also can be used to move down up in the OSD menu screen VOL VOL Press to adjust the volume They are also can be used to move left right in the OSD menu screen VOL button can be used to skip forward to next menu INPUT Press to select the source Power Turn on off the TV set Remote control POWER Turn the TV on standby dD D GD D Buttons for TELETEXT In ATV mode TV TXT Teletext on off CANCEL Turn off the Teletext display REVEAL Reveal any hidden text for example quiz answer NICAM A2 HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for n
16. in DTV mode Allows you to select the Teletext language Can be selected in ATV mode Turn on the blue screen display in no signal state by selecting ON Can be selected in ATV mode Press button and enter the code to enter the submenu The original code is 0000 CHILD LOCK KEY LOCK CODE Turn on off the system lock function Lock the channel you have to enter the code to view the channel Lock the buttons on the TV set you could not operate the TV by the buttons on the TV set Select the parental control mode Change the code Press gt button to enter the First Time Installation menu 19 Menu Settings continued D V POSITION 100 C CLOCK 100 PHASE 97 AUTO ADJUST gt Use the and P buttons to select the PC SETUP menu as the picture above press w button to enter the menu The PC SETUP menu includes the following options H Position Adjust the transverse position of the screen V Position Adjust the vertical position of the screen Clock Adjust the pixel clock frequency until the image size is maximized for the screen Phase Adjust the phase of the ADC sampling clock relative to the sync signal until a stable image is obtained Auto Adjust Press gt button to setup the parameter of the screen automatically 20 DVBS Operation 1 Main Menu All the important settings and features of your receiver can be operated in Main Menu The Main Menu consist
17. lectronic Equipment Directive
18. move the curser to the item of the My Longitude Input the date of the My Longitude and press LEFT RIGHT select Fastor West Press UP DOWN to move the curser to the item of the My Latitude Input the date of the My Latitude and press LEFT RIGHT select South or North Press UP DOWN to move the curser to the item of the Gofo Position Press OK to move the Antenna to the position you want 22 Move the curser to Back or Next button and press OK to exit the submenu to the last menu When you select DiSEqC1 2 Press OK to enter the submenu of the Adjust Antenna Press UP DOWN to move the curser to the item of the 7ransponder Press LEFT RIGHT to select the current transponder Press UP DOWN to move the curser to the item of the Move Dish Press LEFT RIGHT to move dish Press UP DOWN to move the curser to the item of the Goto Ref Press OK to go to 0 Press UP DOWN to move the curser to the item of the Store position Press LEFT RIGHT to select the number of the store position Press OK to save Move the curser to Back or Next button and press OK to exit the submenu to the last menu 1 1 1 8 Search You can change Search mode Press LEFT RIGHT select Sa e iite Transponder Blind Scan MT Searching When you select Satellite press OK to enter the progress of the satellite search mode When you select Transponder press OK to enter the progress of the Transponder search When you select Blind Scan press OK to enter the progress of the
19. oconnect the video recorder using other cables refer to the video recorder instruction manual Video recorder Video camera AV cable a n v E VIDEO Q o 5 lt O All illustrated cables are not supplied 10 Connecting external devices continued Connecting an audio system You can supply the TV sound to the stereo system A with the Scart socket Use a special scart cable SCART to RCA Please consult your hi fi instructions for details If you have a surround sound amplifier decoder B Use the Scart cable or the special scart cable Scart to RCA B 58 o g ecs PLY DO Scart to RCA cable Scart cable All illustrated cables are not supplied Connecting a DVD player Connect a DVD player using either a SCART cable or the HDMI cable only if your external equipment supports HDMI O When using the SCART cable e Switchon the IV e Switch on the DVD player e Select SCART as input source SCART When using the HDMI cable e Select HDMI as input source All illustrated cables are not supplied 11 Auto installation setup Power On Off the LCD TV 1 Connect to the power supply with a power code and an adaptor 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control When you initially turn on the LCD TV you will see the first time installation menu as below Ensure that
20. ode is on Time Interval Channel Type Select between TV and Radio Channel name Press the RIGHT button to display the channel list and using the navigation buttons select the channel to be shown when the receiver will power on by the timer 28 1 3 Channel Organizer In the MA V MENU screen press UP DOWN to a move the cursor to Channe Organiser and oa Favorites Manager then press OK to enter the Channe Organizer ni menu The Channe Organizer menu consists of three sub menus C hanne Manager Favorites Manager Remove Satellite Code edit ED Bd 9 9 Channel Manager No Program Name 0169 CCTV E 0170 hnstv 1 3 1 Channel Manager 0171 jykaton 0172 PhoM In this menu you can change the order of the 0173 PhoC channels delete and edit channels Bieler sl To change the satellite use the RED button and cl Satellite f Delete all press Left Right button Sort GREEN button You can sort the channel order in the channel No Program Name list by A Z Z A Free Pay FAV or Default CCTV na type hnstv jykaton Channel Manager PhoM SSA Pho Free Pay Phol Default Rujian T FujianRadio1 Satellite Sort t Delete all 29 Edit YELLOW button Select the channel that you wish to edit press the YELLOW Edit button to move into the modify program menu In this menu you can modify the Program Name Frequency Symbol rate Video PID Audio PID
21. or long periods of time WARNING TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THIS TV TO RAIN OR MOISTURE THE TV MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE TV NOTE No naked flames such as candles should be placed on the TV IMPORTANT SAFETY INFORMATION Continued This unit has been produced according to all current safety regulations The following safety tips should safeguard users against careless use and the dangers connected with such use Although this appliance has been carefully manufactured and rigorously checked prior leaving the factory as with all electrical appliances it is possible for problems to develop If you notice smoke an excessive build up of heat or any other unexpected phenomena you should disconnect the plug from the mains power socket immediately Ensure that the unit is sufficiently ventilated Never place next to or underneath curtains The mains plug or appliance coupler is used as the disconnect device the disconnect device shall remain readily operarble This set should only be connected to a mains power supply which matches that stated on the label on the rear of the TV do not attempt to connect it to any other type of supply The socket outlet must be installed near the equipment and easily accessible To prevent overload don t share the same mains supply socket with too many other items of equipment Appar
22. ormal size SUBPAGE press to subpage again to cancel INDEX go to index Colour buttons short cuts follow the coloured links in the text In DTV mode press red key to switch between TV and radio Green key yellow key and blue key are invalid I SIZE SUBPAGE INDEX 1 MENU System setup menu INPUT Press to display the input source menu CH Scan through channels VOL Adjust the volume Cursor left right up down Cursor buttons used in menus OK CONFIRM BUTTON for menu EXIT Exit the OSD menu USB The short cuts to the multtimedia in DVBS mode CH Scan through channels VOL Adjust the volume Cursor left right up down Cursor buttons used in menus OK CONFIRM BUTTON for menu 0 9 Choose channel directly C gt Returns to the previous channel Remote control continued TV TXT CANCEL REVEAL NICAM A2 HOLD SIZE SUBPAGE INDEX PICTURE Select the picture mode SOUND Select the sound mode DISPLAY Display current mode information MUTE Mutes the Audio SLEEP Standby Timer TV RADIO Disc menu change between TV and Radio DVBS SAT Display the satellite list DVBS AUDIO Shows the list of available languages for the channel you are watching DVBS INFO Shows information of the current channel FAV Display the favorite program list SUBTITLE To switch the dialogue at the bottom of the screen TEXT To view the teletext broadcasting program PIC FORMAT Press
23. ou can add the new transponder Press GREEN button to enter Ea t Transponder submenu you can edit the transponder 24 1 1 3 3 Polarity You can select the po arity 1 1 3 4 Symbeol Rate You can select Symbol Rate 1 1 3 5 NIT Searching You can select the NIT Searching 1 1 3 6 Free You can select the fee mode 1 2 System setting In this menu you can configure the systems such as anguage Setting OSD style Parental Control TV Settings Time Setting and System Update 1 2 1 Preference You can set the OSD anguage the Audio Preferences language TV mode Video outout Screen mode set factory default Modulator settings OSD Languag English Audio Language English and 7 me setting TV Mode Video Output Screen mode Set Default Modulation option 1 2 1 1 OSD Language Time setting Press LEFT RIGHT to select the OSD language 1 2 1 2 Audio Lang Press LEFT RIGHT to select the Audio language 1 2 1 3 TV Mode Press LEFT RIGHT to select PAL or NTSC If you don t know which standard your TV has please select AUTO 1 2 1 4 Set Default Press LEFT RIGHT to select the AZZ or Scramble Press the OK key enter the code the receiver will return to its factory default state and the data will be deleted NOTE Your PIN code will change back to the factory setting 0000 25 1 2 1 5 Time Setting Press OK go to 7 re Setting below If a broadcaster provides G 7 you can set the time using G 7 or set
24. r event 1 Press UP DOWN to move the cursor to the event for which you want to add a timer 2 Press RED key to add a timer shows you current event timer information based on the event you have chosen You can also use this screen to modify each value To save the settings press OK To quit event timer setup press EXIT EPG pre recorded the setting is the same as pre recorded setting of timer 2 4 Selection Audio Language Press the AUDIO button on the remote control to select the audio language as show in Select the LEF7 RIGHT MIN or STEREO Press OK to make one selection 2 5 TELETEXT function In no menu state press TEXT Press UP DOWN to move up or down from the displayed page number Press Numeric keys to input page directly If the current program has no Teletext you ll see the message Teletext no data Press any key to exit 2 6 Subtitles In no menu state press SUB Press LEFT RIGHT to select between teletext and DVBS subtitles Use UP DOWN to select subtitles language Confirm your selection with OK button 35 TROUBLE SHOOTING GUIDE To assist in locating possible faults use the help guide below SYMPTOM TROUBLESHOOTING No Picture no sound Check that the TV is correctly plugged in Check that the TV is connected to a suitable power source Check the electrical supply is turned on No Picture Ensure that the TV is powered on Check that the cables are fitted securely Ensure the aerial and or ex
25. s of four sub menus which are nstallation System setting Channel Organizer and Multimedia Press the MENU key when the menu is off The MAIN MENU screen will appear 1 1 Installation The Transponder Manager 1 1 1 Dish Setup You can select satellite set the parameter of satellite parameter and enter to install satellite submenu in this menu 1 1 1 1 Satellite Move the curser to the satellite you want to install Press OK to select the satellite you want to install Note You must press OK to save changed date when the cursor is on the Satellite item before you select another satellite 21 installation menu contains three sub menus 2 Ka Pa Configure antenna RESA AI 4 3140 H 27509 Transponder Local Frequency 4 6150 22K Tone OFF Polarity 4 13 18V DiSEqC Switch 4 OFF 12V 4 OFF Antenna mode lt 4 Fixed Search 4 Satellite ELD Change Configure antenna Satellit cece Nowsat5 Dy 4 3140 H 27509 Transponder Local Frequency 5160 22K Tone 4 OFF Polarity 4 wav DiSEqC Switch 4 OFF 12V 4 OFF Antenna mode lt 4 Fixed Search 4 Satellite E Change Dish Setup Auto Scan Transponder Manager Auto Scan and Hotbird Nilesat Ku_Arabsat2A 2C C_Arabsat 2B Ku_Arabsat 2B C_AsiaSat 3S Ku_AsiaSat 38 C_Yamal 102_201 Ku_Yamal102_201 jHotbird Nilesat Ku_Arabsat2A 2C C_Arabsat 2B Ku_Arabsat 2B C_AsiaSat 3S Ku_AsiaSat 35 C_Yamal 102_
26. ternal sources are connected Press the INPUT button to change the source Turn the TV on or off No Sound Press the MUTE button and check if Mute mode is set Switch to another channel and see if the same problem occurs Press V button to see if the problem can be solved channels Adjust the antenna No colour on some Check if the same problem exists on other channels channels black amp Ensure the correct picture settings are selected white Noisy Snowy Check the antenna is connected correctly Ghosting picture Check that the antenna Is in good condition Try moving the antenna NOTE The TV must only be repaired by a qualified registered service person Never attempt to remove the back cover as the TV has dangerous voltages inside that may cause fatality or fire 36 TECHNICAL SPECIFICATIONS Specifications of the TV that you have just purchased may vary from the information in this table due to technical innovations TV Specifications TV System PAL BG DK Audio System BG DK I SECAM L L Resolution 1920 x 1080Pixels RGB Aerial input 75 Q unbalanced Power requirements 12V 5A Power consumption 60W 37 It at any time in the future you should need to dispose ot this product please note that Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for mum recycling advice Waste Electrical and E
27. the aerial is plugged in to the TV Make sure your Remote is in TV mode by pressing INPUT button switch on the TV by pressing POWER You will see the first time LANGUAGE 4 LANGUAGE DI installation menu You can select Country and Language OSD gt display language and select the contents of the Auto Search Analog Program or Digital Program according to the hints at the bottom When you finished press A4 W button to select OK and press OK button to start auto search The TV will start searching from the lowest frequency you can press MENU to cancel the auto search When it finds a station it will automatically store this in the first location and move to the next When Autosearch is complete the TV will display the first station found If you want to change the order of the programs you can use the Program Edit function to change Source Menu You can select the input source menu by pressing the Source button on the remote control or the INPUT button on the LCD TV INPUT Press button on the remote control SOURCE E gt Use lt gt to move to the desired input source Press to select 12 Menu Settings 1 Turn the LCD TV on 2 Press the MENU button on the Remote Control 3 Use the lt and buttons to navigate through the menu 4 Press the EXIT button to exit the Menu CHANNEL MENU Allows you to search channels and set up a variety of channel options
28. to change the display mode of the screen 4 3 16 9 etc PAUSE Pause the current screen in DVB S EPG To show the Electronic Program Guide during no menu state only Aerial connection WARNING ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS Connecting the TV Antenna Connect the TV antenna to the aerial socket with a 75 ohm co axial plug For best results use a high gain TV aerial preferably roof or loft mounted e To improve picture quality in a poor signal area purchase and install a signal amplifier ge e Ifthe antenna needs to be split for two TVs use a 2 Way Signal Splitter not supplied Connecting external devices This instruction manual shows the simplest and most effective way of connecting your TV to ancillary equipment Alternate methods are listed below HDMI Lead You can connect this TV to a compatible device using a HDMI lead This method will give the best picture Connect the cable from the HDMI equipment to the TV HDMI socket SCART Lead You can connect this TV to a compatible device using a SCART lead The connection uses component video signals i e the red green and blue RGB content of the video are sent on separate signals VGA Cable You can use your TV as a monitor for your personal computer by using a VGA cable Sound from your personal computer may also be played through the TV Connecting external devices contin
29. ued LL 0 Pr Video R in L in Pb Y 0 6000 HDMI VGA PC IN Headphone I omo Ga POWER Connect to the mains adaptor HDMI Connect it to the HDMI of DVD or other equipment VGA For PC display Connect it to the D Sub 15 pins analog output connector of the PC PC IN Connect it to the audio output terminal of PC SCART Connect them to the SCART video output terminal of DVD used in component source Headphone Connect it to your headphone or other audio equipment RF Connect antenna or cable 75 Ohm coaxial to receive TV signal R L in Connect them to the audio output terminal of DVD shared with YPbPr VIDEO Connect it to video output terminal of DVD YPbPr Connect them to the YPbPr video output terminal of DVD used in component source Caution Before connecting external devices e Makes sure to disconnect the appliances from the power supply in order to avoid any potential damage from occurring e Make sure to establish the required connection e Make sure that the connectors are properly and correctly attached before connecting the appliances to the power supply Connecting external devices continued PC connection As PCs are sometimes still supplied with a conventional CRT monitor you may need to adjust the display settings of your PCs graphics card otherwise the pictures may not appear correctly Switch on your PC still with your original monitor connected now select the s
30. y Pause Green to return to folder Yellow to Random Repeat play or Blue to Fast Forward in 3 steps Progress bar indicates and Time remaining 50 01 20 02 40 to play Audio Spectrum Display responds to Repeat ar OD the acoustic content of the file playing Volume level shows dynamically when the lt gt keys are pressed Now you can save a whole party of music and play it back simply mp3 mp3 Exit Bisa 1 4 3 My Movie Select My Movie and press the OK key Select folder through Menu structure on the left of screen Use the the A W keys to select a movie file Press the OK key to play selected file Press A W keys to play the previous movie or next movie press gt to change the ci i _ volume s wu gt P RV cx MENTI 32 1 4 4 Gomoku Line up the balls against the computer Options include Move First Move Later Human Easy and Normal 1 5 Calendar View Calendars month by month from the year 1900 to 2100 Starts by highlighting today Find out what day of the week you were born 2 Other operation functions 2 1 Program List In normal operation status no menu operation press the OK button the Program List menu will appear on screen Press RED button to select sattellite in satellite list Press GREEN button to sort program by A Z to select easy program you want 33 GOMOKU amp January w lt 2009 Sun Mon Tue Wed Thu Fri S GZTV sichuan CCTV 4 C
31. your own time by yourself If the G 7 usage is OV then the Current time is set automatically or you can set the time zone If your broadcaster provides the correct time offset then your receiver will change from summertime to wintertime automatically If you set GM7 Usage to OFF Set Data and Set Time item are displayed To set the time value manually move the cursor to the time item and use the numeric buttons on the remote control 1 2 2 Parental Control Parental setting and can change the PIN code The default PIN code is 0000 eLock Setting Channe Lock Set the system channel lock to Parental Control NO or YES If the channel lock is YES the user has to enter the parental PIN code correctly before watching the locked channel Channel Loc No Censorship Lock No Block Censorship lock set the censorship class e Parental Setting Press YELLOW key to set some channels to PASTASINI lock status If a channel is locked the user has 172 PhoM to enter the parental PIN code correctly before watching the locked channel FujianTV1 FujianRadio1 Hebei TV QaAeNs Ol Youn Satellite Save amp Exit 26 e Change PIN Modifying the PIN You must enter the 4 digits PIN and confirm it again the system PIN will be changed into the new PIN as show on Parental Control Lock setting New PIN KERK Confirm New PIN oaa 1 2 3 System Update In this menu you can select Update by OT
Download Pdf Manuals
Related Search