Da-Lite 88625 projection screen
Contents
1. 100 cotton cloth wipe dry after each cleaning session To clean a stubborn stain or a sticky surface use denatured alcohol methanol or methyl alcohol following the same procedure as for water For extremely stubborn stains use V M amp P Naphtha or Super Naphtha and follow the same procedure as for water NOTE Fast Fold screens are shipped with tissue paper packed between the folds This keeps the material from sticking to itself and makes it easier to unfold WITH FAST FOLD PRESENTATION DRAPERY ACCESSORIES For a finished professional appearance Fast Fold screens can be dramatically enhanced with the Drapery Presentation Accessory Kit Handsome velour drapes in a choice of three eye catching colors surround the screen on four sides providing an attractive stage front to the audience The Presentation Drapery Accessory Kit serves a second function when used with a rear projection surface It shields extraneous light from the projector as well as hiding projection and other equipment from the audience An optional Adjustable Skirt Bar provides a versatile method of changing the picture ratio The hardware in the kit is made of lightweight aluminum and along with the folded velour drapes is packed into a convenient easy to carry poly case The entire kit can be set up in minutes Case optional at additional cost Presentation Drapery Accessory Kit ILLUSTRATED Consists of a set of velour drapes in choice of2. Blue Gray or Black Valance two Wings Skirt Valance Bar and two Wing Bars e Allbars attach to screen frame with slip on clamps No tools needed e Valance Bar attaches to frame first Wing Bars then attach to Valance Bar e Valance Bar extends 12 above frame Wing Bars extend 32 on each side e Wing Bars attach to frame when ceiling height prevents use of Valance e 45 High Skirt snaps to bottom of screen or to optional Adjustable Skirt Bar Form 89123 Rev 3 31
3. NOTE Speedy Crank at bottom of leg should be on side of leg away from screen Do not tighten Speedy Cranks until all are started Screens under 10 in height will include 6 Speedy Cranks 3 per leg Screens 10 in height and over will include 8 Speedy Cranks 4 per leg Any screen ordered with optional HD Legs will include 10 Speedy Cranks 5 per leg Height Adjustment Fast Fold Deluxe screen height is adjustable in 6 increments either up or down Normal screen height is 44 from bottom of frame to floor and is the standard height for use with presentation drapery accessories NOTE Do not extend frame so that more than half of the frame height is above the top of the legs To fold frame unlock all four corner braces Push the blue snap latch buttons and fold the frame NOTE for some frames fold the top and bottom first LEG FRAME SPEEDY CRANK FRAME SPACER BLUE SNAP LATCH BUTTON c pe S FOLDING THE PICTURE SURFACE FOR PACKING When folding the screen material for packing observe the following precautions before proceeding 1 The surface should not be allowed to contact painted varnished or plastic finished objects for a prolonged period of time 2 Make certain the picture surface is on a clean flat surface Then proceed in the following manner Place clean white tissue paper with no printing on top of the pictur
4. The Da Lite Difference Instruction Book for FAST FOLD DELUXE SCREEN FRAMES STANDARD LEG ee E DA LITE es DA LITE SCREEN COMPANY INC 3100 North Detroit Street Post Office Box 137 Warsaw Indiana 46581 0137 Phone 574 267 8101 800 622 3737 Fax 574 267 7804 Toll Free Fax 877 325 4832 www da lite com e mail info da lite com PROCEDURE Da Lite Fast Fold Deluxe frames are made of 1 1 4 square hard aluminum tubing with an anodized finish With proper care they will provide many years of use Please follow the set up instructions below steps 1 6 1 Remove the frame from its case and wrapping Position it as shown front view Two Section Frame Three Section Frame 2 Unfold the frame following the directions given below so that it is lying flat snap latches will automatically lock LOOKING FROM THE TOP ROTATE 90 PROCEDURE 3 10 While holding the bottom of the frame in place lift the top of the frame to unfold the sides Lock down all four corner braces F Lay the frame on the floor Match top of screen surface labeled TOP with top of frame SNAP LATCH Snap all four corners eae Starting at the bottom section snap the center button Continue snapping LOCK the remaining buttons y DOWN THE N CORNERS Snap the top and sides in the same manner Attach Leg to each side of frame using at least 2 Speedy Cranks per leg
5. e surface If tissue is not available a soft white cloth or something similar will serve the same purpose Under no conditions should newspaper or anything similar be used since these may damage the screen material 1 With the viewing side facing up fold the fabric in half from top to bottom Make certain when folding the surface does not come in contact with either the black binding grommets or snap buttons 2 If the material on the first fold is more than 3 feet high then fold once again but always place clean tissue paper between the folds 3 For large size screens fold in half again if necessary Make certain when folding the surface does not come in contact with either the black binding grommets or snap buttons HANDSOME THEATRE LIKE SET CREATED 4 After the top to bottom folding procedure is completed then fold from left to right and continue folding until the fabric is of sufficient size to fit into the leatherette case NOTE Keep the screen surface in the envelope provided when it is not in use Failure to observe these normal precautions may cause discoloration of the material CLEANING Da Mat Da Tex High Contrast Da Tex Pearlescent Cinema Vision Dual Vision Ultra Wide Angle and 3D Virtual Black surfaces can be cleaned as follows Using a white clean cloth 100 cotton preferred that is dampened with clear water gently wipe the area in one direction Do not use a circular motion Using a dry
Download Pdf Manuals
Related Search