Philips 3000 series 42PFL3605H 42" Full HD 3D compatibility Black
Contents
1. Converts non PCM audio type to PCM format e Multichannel Outputs audio to the home theater Use the universal access menu You can activate the universal access menu during the first installation Once enabled you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices Tip You can also enable the universal access menu by selecting Setup gt Installation gt Preferences gt Universal access gt On 1 when watching TV press OPTIONS L gt The options menu appears 2 select Universal access then press OK or gt to enter J Press lt P to select one of the fo lowing options and press OK to enter e Hearing impaired Enables or disables hearing impaired subtitles e Visually impaired Selects speaker headphone or both for Vol vis impaired audio Select Off to disable audio descriptor Only applicable to the UK region e Volvis impaired Adjusts the volume of visually impaired audio Tip Press the colour buttons on the remote control to enter the options Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu 1 Press MHEG TELETEXT L gt The teletext screen appears 2 Press OPTIONS The teletext options menu appears ptions Reveal Hides or reveals hidden information on a page suc2. Remove devices from the home menu If a device is no longer connected to the TV remove it from the home menu Press amp MENU Press 74 to select a device to remove Press OPTIONS Press AY to select Remove device then press OK A WN Select Remove then press OK L gt The selected device is removed from the home menu EN 11 English Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Note When watching TV or using external devices press OPTIONS then select Picture and sound for quick access to picture and sound settings Use settings assistant Use the settings assistant to guide you through the picture and sound settings 1 Pres amp MENU 2 Press to select Setup gt Picture gt Settings assistant 3 Press OK L gt The Settings assistant menu appears Follow the on screen instructions to choose your preferred picture settings Use smart picture Use smart picture to apply pre defined picture settings 1 Pres PICTURE L gt The Smart picture menu appears 2 Press AV to select one of the following settings Personal Applies the settings set in Settings assistant menu e Vivid Applies rich and dynamic settings Standard Adjusts picture settings to suit most environments and types of video e Ci
3. fthere are intermittent sound disruptions check that output settings from the HDMI device are correct e fyou use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO IN mini jack only EN 39 English Computer connection issues The computer display on the TV is not stable Check that your PC uses the supported resolution and refresh rate Set the TV picture format to unscaled Contact us f you cannot resolve your problem refer to he FAQs for this product at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the Addendum VN Warning Do not attempt to repair the product yourself This may cause severe injury irreparable damage to your product or void your warranty Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 40 EN 10 Index analogue fine tune 28 antenna 30 B back connectors 30 batteries 36 5 bracket for wall mount 3 34 5 channel decoder 26 channel grid 9 channels favourites list 16 fine tune 28 grid 9 install automatic 27 manual 28 ist 16 ock 20 rename 29 reorder rearrange 29 switch 9 est reception digital channels 29 roubleshooting 38 une 28 update 17 child lock ock channels
4. e DVB DVB Terrestrial DVB T MPEG4 TV system DVB COFDM 2K 8K PAL I B G D K SECAM B G D K L L e Video playback NTSC SECAM PAL e Tuner Bands Hyperband S channel UHF VHF Remote control PFO1E09B e Batteries 2 x AAA LRO3 type Power e Mains power 220 240V 50Hz Standby power lt 0 3 W e Ambient temperature 5 to 40 degrees Celsius Supported TV mounts To mount the TV purchase a Philips TV mount or a VESA compatible TV mount To prevent damage to cables and connectors be sure to eave a clearance of at least 2 2 inches or 5 5cm from the back of the TV VN Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics bears no responsibility for improper TV mounting that results in accident injury or damage TV screen Required Required size pitch mm mounting bolts inches 32 200x200 4xM6 10mm 42 300x200 4x M6 lt 10 mm 47 400x300 4xM8 lt 12 mm Product specification Design and specifications are subject to change without notice 32PFL3605H e Without TV stand Dimension WxHxD 795 6 x 508 3 x 93 mm e Weight 8 3 kg e With TV stand Dimension WxHxD 795 6 x 556 6 x 220 8 mm e Weight 94 kg 42PFL3605H e Without TV stand Dimension WxHxD 1018 5 x 635 7 x 83 mm e Weight 11 5 kg e With TV stand Dimension WxHxD 1018 5 x 683 x 235 8 mm e Weight 1
5. yourself Use the TV and accessories only as intended by the manufacturer The caution sign printed on the back of the TV indicates risk of electric shock Never remove the TV cover Always contact Philips Customer Support for service CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUCION ADVERTENCIA NO ABRIR RIESGO DE CHOQUE ELECTRICO pairs e Any operation expressly prohibited this manual or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to de
6. Installation gt Preferences gt Teletext 2 5 Press AY to select On or Off Press to confirm your choice Create and use list of favourite channels You can create a list of your preferred TV channels so that you can find those channels easily Select a favourite list 1 When watching TV press OK to display the channel grid 2 Press OPTIONS L gt The channel options menu appears 3 Press Av to select Select list then press OK to enter L gt The channel list options appear 4 Select Favourite then press OK Only channels in the favourite list appear in the channel grid Note The favourite channel grid is empty until you add channels into the favourite lists View all channels You can exit a favourite list and view all installed channels 1 When watching TV press OK L gt The channel grid appears 2 Press OPTIONS L gt The channel options menu appears J Press Av to select Select list then press OK or to enter 4 Select All then press OK All channels are displayed in the channel grid Note All favourite channels are marked by an asterisk when you view the channel grid Add a channel to a favourite list Tip View all channels before adding a channel to a favourite list When watching TV press OK L gt The channel grid appears Press to select a channel to add to a favo
7. AUDIO R VHS HDMI 32 EN 5 M Headphone Stereo audio output to headphones or earphones 6 COMMON INTERFACE Slot for a Conditional Access Module CAM COMMON INTERFACE Connect a computer Before you connect a computer to the TV Set the screen refresh rate on your computer to 60Hz e Select a supported screen resolution on your computer Connect a computer with one of the following connectors Connections via DVI or VGA require an additional audio cable HDMI cable DVI HDMI cable AUDIO IN LEFT RIGHT VGA DVI N AUDIO IN LEFT RIGHT VGA DVI VGA cable AUDIO IN LEFT RIGHT VGA DVI 4 EN 33 English Use a Conditional Access Module A Conditional Access Module CAM is provided by digital TV service operators to decode digital TV channels Note Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module Insert and activate a CAM Caution Be sure to follow the instructions described below Wrong insertion of a CAM may damage both the CAM and your TV 1 Switch off the TV and disconnect it from the power outlet 2 Following the directions printed on the CAM gently insert the CAM into the COMMON INTERFACE at the side of the TV Push the CAM in as f
8. theTV To remove the logos and images set the location of your TV to home 1 Press amp MENU 2 Select Setup gt Installation gt Preferences gt Location 3 Select Home and press OK TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation e Check that the TV supports DVB T DVB T Lite or DVB C in your country Some channels are not automatically installed on my TV During installation make sure that you select the country where you are installing the TV see Step 2 Select your country on page 27 Picture issues The is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV Loudspeakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV freception on only one channel is poor fine tune this channel There is poor picture quality from connected devices C
9. AY 4b to select Setup gt Features gt Sleep timer The Sleep timer menu appears NA 3 Press lt P to select a value between zero and 180 minutes L gt The sleep timer can be set in steps of five minutes If set to zero the sleep timer is switched off 4 Press OK to switch on the sleep timer L gt The TV switches to standby after the specified time EN 19 English Automatically switch the TV on on timer You can switch on the TV from standby to a specific channel at a specified time 1 Press MENU 2 Press to select Setup gt Features gt On timer 3 Press to enter the On timer menu e Activate Selects how often the TV is switched on e Time Sets the time to switch on the TV e Programme no Selects the channel or the connected device Press amp MENU to exit A Tip e Select On timer gt Activate gt Off to disable this feature Use TV locks You can prevent your children from watching certain programmes or channels by locking the TV controls Set or change your PIN code 1 Press amp MENU 2 Press to select Setup gt Features gt Set code Change code L gt The Set code Change code menu appears 3 Enter your code using the Numeric buttons L gt Follow the on screen instructions to create or change your PIN code Tip f you forget your code enter 8888 to override any existin
10. MPEG artifact reduction suitable picture format If Smoothes out transitions on digital not widescreen is applied pictures You can switch this feature Sup on or off e Colour enhancement Makes colours more vivid and improves the details in bright colours You can switch this feature on or off mode Adjusts the picture when a PC is connected to the TV via HDMI or Auto format Not for PC mode Automatically displays the ik er zoom Not for HD and PC mode Removes the black bars on the side of 4 3 broadcasts There is minimal distortion 4 3 Shows the classic 4 3 DVI format e Picture format Changes the picture format Subtitle zoom Displays 4 3 pictures over the full area of the screen with sub titles visible Part of the top of the picture is clipped off Movie expand 14 9 Not for HD and PC mode Scales 4 3 format to 14 9 e Picture size Adjusts the viewing area when set to maximum you might see noise or a rough edge of an image e Horizontal shift Adjusts the picture horizontally for PC VGA DVI HDMI or YPbPr e Vertical shift Adjusts the picture vertically for PC VGA DVI HDMI or YPbPr Movie expand 16 9 Not for HD and PC mode Scales 4 3 format to 16 9 Wide screen Scales 4 3 format to 16 9 Change picture format 1 Press FORMAT L gt A picture format bar appears 2 Press AV to selecta picture
11. TV channels and also to pick up new ones get set for digital V Digital UK the body leading the digital TV switchover will advise you when you need to re tune during the switchover If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by switchover and you won t need to re tune If you have any questions please contact your equipment supplier or call Digital UK 0845 6 50 50 50 or visit www digitaluk co uk How to re tune To find out how to re tune your TV check this user manual for details Go to section 6 Install channels If you do not re tune your channels when advised to do so by Digital UK you may lose some or all of your channels until you do re tune You should re tune your TV every few months to check for any new channels If you are missing any channels it may be that they are not available in your area or that your aerial needs upgrading When does switchover happen Copeland switches on October 17 2007 Visit us at digitaluk co uk Call us on 0845 6 50 50 50t tCalls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends Rates may vary for calls from non BT lines Shetland Islands STV North v STV Central 2010 11 Border 2008 09 Tyne Tees 2012 Yorkshire 2011 Central Anglia Wales 9 ui 2009 10 London 2012 Meridian 2012 West Country 46 PHILIPS 2010 Konin
12. disables lipsync audio outp ut When this 15 enabled the TV synchronises the audio and video performance When disabled you need to adjus feature on the ext the lipsync audio ernal device that is connected to the TV Only available wi e Volume Adjusts Volvis impaired impaired audio wi th SPDIF connection the volume Sets the mix of visually h regular audio When available visually impaired audio includes audio descriptions You can also enab AD Audio Descr of on screen action e this by pressing iptor Only applicable for the UK region 14 EN Balance Adjusts the balance of the right and left speakers Audio language Available for digital channels when multiple languages are broadcast Lists available audio languages Dual 1 11 Selects audio languages if dual sound broadcast is available Mono Stereo Selects mono or stereo if stereo broadcast is available TV speakers Turns TV speakers on or off Only available if EasyLink is switched on Surround Enables spatial sound Headphone volume Adjusts headphone volume Auto volume levelling Automatically reduces sudden volume changes for example when switching channels Delta volume Levels out volume differences between channels or connected devices Switch to the connected device before you change the delta volume SPDIF OUT Selects the type of digital audio output through SPDIF connector e
13. 2 8 kg 47PFL3605H e Without TV stand Dimension WxHxD 1129 8 x 00 7 x 83 mm e Weight 16 8 kg e With TV stand Dimension WxHxD 1129 8 x 746 4 x 270 1 mm e Weight 19 8 kg EN 37 English 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on Disconnect the power cable from the power outlet Wait for one minute then reconnect it Check that the power cable is securely connected The remote control is not working properly Check that the remote control batteries are correctly inserted according to the orientation Replace the remote control batteries if hey are flat or weak Clean the remote control and TV sensor ens The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the TV lock feature Enter 8888 menu is in the wrong language Change the T V menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis o action is required The creaking sound is normal expansion and contraction of he TV as it cools down and warms up This does not impact performance 38 EN Cannot remove e sticker banner displayed on
14. 20 ock connected devices 20 PIN code 20 ratings lock 21 clock display 18 set 18 common interface 34 computer connect 40 33 display resolution 36 Conditional Access Module 34 connect antenna 30 PC 40 33 connectors back connectors 30 HDMI 39 30 overview 30 side connectors 32 USB 22 content ratings 21 country 27 D daylight saving 19 decoder 26 default settings 26 demo 26 devices 0 devices add to home menu 1 connect 30 remove 1 1 watch 0 digital channel subtitles 22 test reception 29 digital radio 24 27 EN 41 English digital services L CAM 34 language teletext 16 10 15 menu 26 disconnect USB 24 subtitle 21 display troubleshoot 38 resolution 36 list dispose 5 favourites list 16 location E country 26 EasyLink home or shop 24 disable 35 lock enable 35 Kensington lock 35 one touch play 35 lock channels 20 one touch standby 35 lock connected devices 20 system audio control 35 PIN code 20 eco green 6 ratings lock 20 end of life 5 energy efficiency 6 M environmental care 3 menu e sticker 24 language 26 main menu 11 F teletext 15 factory settings 25 universal access 15 favourites list MHEG teletext 10 add to list 17 MPEG artifact reduction 12 create list 16 multimedia 36 view list 16 fine tune channels 27 digital radio 23 USB 23 with slideshow 23 G mute TV speakers 34 green 6 24 HDMI 39 31 29 on ti
15. DMI CEC compliant devices your TV can switch automatically to play audio from the connected device To use one touch audio you must map the audio input from the connected device to your TV You can use the remote control from the connected device to adjust the volume Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it Press amp MENU Press to select Setup gt Installation gt Preferences gt EasyLink J Select On or Off NA Use one touch play 1 After enabling EasyLink press play on your device L gt TheTV automatically switches to the correct source Use one touch standby 1 Press Standby On on the TV s or device s remote control L gt The TV and all connected HDMI devices switch to standby Set TV speakers to EasyLink mode When you play content from an EasyLink compliant home theater the TV speakers are automatically muted 1 Enable one touch play and one touch standby between your Easylink compliant devices by following the instructions in the previous section see Enable or disable EasyLink on page 35 Press amp MENU Press AY 4b to select Setup gt Sound gt TV speakers gt Auto EasyLink L gt The speakers are turned off automatically when content from an Easylink compliant system is detected 4 Press Av to select Setup gt Sound gt
16. Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC All other registered and unregistered trademarks are the property of their respective owners EN 3 English 2 Important Read and understand all instructions before you use your If damage is caused by failure to follow instructions the warranty does not apply Safety Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from he power outlet immediately Contact Philips Consumer Care to have the TV checked before use ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Never insert objects into the ventilation slots or other openings on the TV When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing Risk of short circuit or fire Never expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 25 kg EN Risk Whe
17. Register your product and get support at www philips com welcome 32PFL3605 12 42PFL3605 12 47PFL3605 12 User Manual PHILIPS Model Serial www philips com support a sterreich 0800 180 016 Belgi Belgique 80080190 00800 11 544 24 Hrvatska 01 6403 776 Lokalni poziv Cesk republika 800142840 Bezplatny hovor Danmark 3525 8759 Lokalt opkald Estonia 6008600 kohalik k6ne tariifi Suomi 09 2311 3415 paikallispuhelu France 0805 025 510 num ro sans frais Deutschland 0800 000 7520 geb hrenfreier Anruf E Aa a 0 0800 3122 1280 KArjon xwpis xp won Magyarorsz g 0680018189 Ingyenes h v s Hrvatska 0800 222778 free Ireland 01 601 1777 Italia 800 088774 Numero Verde 7 727 250 66 17 local Latvia 52737691 local Lithuania 67228896 local Luxemburg Luxembourg Nederland 40 6661 5644 0800 0230076 Ortsgespr ch Appel local Gratis nummer Norge 22 70 81 11 Lokalsamtale Polska 00800 311 13 18 Pozosta e produkty RTV oraz AGD Portugal 800 780 903 Chamada Gr tis Rom nia 0800 894910 Apel gratuit 0318107125 Apel local 495 961 1111 0 15 USD minute 381 114 440 841 Lokalni poziv Slovensko 0800 004537 Bezplatny hovor Slovenija 00386 12 80 95 00 lokalni klic Espana 900 800 655 Tel fono local gratuito solamente para clientes en Espana Sverige 08 5792 9100 Lokalsamtal Suiss
18. Slideshow frequency Sets the amount of time that a picture is shown e Rotate image Rotates a picture Show info Displays the picture name date size and next picture in the slide show 3 Press OK to confirm your setting Note Rotate image and Show info appear only when you press OK to pause the slideshow Listen to music 1 In the USB thumbnail browser view select Music and press gt to enter e Press 0 GUIDE to switch between thumbnail and file browsing views 2 Press to select a music track or album 3 Press OK to play the selected music Button Function OK Pause resume play or stop playback lt gt Go to the previous or next music Music settings When listening to music press amp OPTIONS to access one ofthe following music settings Start playback Stop playback Starts or stops the music e Repeat Play once Repeats a song Disables repeat play and plays a song or album once e Shuffle on Shuffle off Enables or disables random play of songs e Show info Displays the file name e TV speakers Sets the TV speakers on or off Only available if EasyLink is switched on e Sound Adjusts the sound setting View a slideshow with music You can view a picture slide show with background music Select an album of songs Press OK Press BACK to return to the USB content browser Select an album of pictur
19. TV speakers gt On to disable system audio control and enable the TV speakers Note To mute the TV speakers select TV speakers gt Off Use a Kensington lock There is a Kensington security slot at the back of the TV Prevent theft by looping a Kensington ock between the slot and a permanent object such as a heavy table EN 35 English 8 Product information Product information is subject to change without notice For detailed product information go to www philips com support Supported display resolutions Computer formats Resolution refresh rate 640x480 60Hz 800 600 60Hz 024 x 768 60Hz 280 x 720 60Hz 280 x 768 60Hz 280 x 1024 60 Hz 360 x 768 60Hz 440 x 900 60Hz For Full HD only 680 x 1050 60Hz For Full HD only Video formats Resolution refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz e 720p 50Hz 60Hz e 1080i 50Hz 60Hz e 1080 24Hz 25Hz 30Hz 50Hz 60Hz 36 EN Multimedia Supported storage device USB Only FAT or FAT 32 USB storage devices are supported e Supported multimedia file formats Images JPEG e Audio Note Multimedia file names must not exceed 128 characters Tuner Reception Transmission e Aerial input 75 ohm coaxial IEC75
20. U Press to select Setup gt Installation gt Channel installation gt Analogue manual install The Analogue manual install menu appears Press to select Fine tune then press gt to enter Press to adjust frequency Press OK to confirm Press AY to select Store current channel to store the channel number Press gt to enter Store current channel hen press OK Press 4 to return to the Channel installation menu Rename channels You can rename channels The name appears when you select the channel 1 When watching TV press OK to display he channel grid 2 Select the channel to rename 3 Press OPTIONS L gt The channel options menu appears 4 Press AY to select Rename channel hen press OK L gt A text input box appears Press AY 4b to select characters Press OK to confirm each character Select Done then press OK to finish renaming channels NOW Tip Press Aa to change an uppercase letter to a lowercase letter and vice versa Rearrange channels After you install channels you can rearrange the order in which they appear 1 When watching TV press OK to display the channel grid Press OPTIONS L gt The channel options menu appears Press AV to select Reorder then press OK Select the channel to rearrange then press OK L gt The selected channel is highlighted AW N Press to move the
21. appears 2 select Clock 3 Press OK Note To disable the clock repeat the above procedure Change the clock mode 1 Press amp MENU 2 Press to select Setup gt Installation gt Clock gt Auto clock mode J Press Av to select Automatic or Manual 4 Press OK to confirm Change the time zone Press MENU Press to select Setup gt Installation gt Clock gt Time zone Press AV to select your time zone AW N Press OK to confirm Note This option is only available if you select Auto clock mode gt Manual in countries with clock transmission data Use daylight saving 1 Press MENU 2 Press Av to select Setup gt Installation gt Clock gt Daylight saving Press OK or P to enter Daylight saving A w Press to select Standard time or Daylight saving time Press OK to confirm Note This option is only available if you select Auto clock mode gt Manual Use timers You can set timers to switch the TV to standby at a specified time Tip Setthe TV clock before you use timers Automatically switch the TV to standby sleep timer Sleep timer switches the TV to standby after a pre defined period of time Tip You can switch off your TV earlier or reset the sleep timer during the countdown Press amp MENU Press
22. ar as it will go Reconnect the TV to the power outlet Turn on the TV and wait for the CAM to be activated This may take several minutes Do not remove the CAM from the slot when in use removing the CAM will deactivate digital services UAU E COMMON INTERFACE 34 EN Access CAM services 1 After inserting and activating the CAM press MENU 2 Press Av to select Setup gt Features gt Common interface L gt Applications provided by the digital TV service operator appear on the screen Note This menu option is available only if the CAM is inserted and activated correctly Use Philips EasyLink Your TV supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note The EasyLink compliant device must be switched on and selected as the source Philips does not guarantee 100 interoperability with all HDMI CEC devices EasyLink features One touch play When you connect your TV to devices that support one touch play you can control your TV and the devices with one remote control One touch standby When you connect your TV to devices that support standby you can use your TV remote control to put your TV and all connected HDMI devices in standby mode System audio control When you connect your TV to H
23. cable or satellite 750 Ir TV ANTENNA Q EXT 1 and EXT 2 CVBS and RGB Analogue audio and video input from analogue or digital devices such as DVD players or game consoles EXT I RGB CYBS OO EEEEENEEEEN 3 SPDIF OUT Digital audio output to home theatres and other digital audio systems SPDIF OUT 4 SERV U For use by service personnel only 5 PC IN VGA and AUDIO IN Audio and video input from a computer VGA AUDIO IN LEFT RIGHT VGA DVI 6 HDMI 1 Digital audio and video input from high definition digital devices such as Blu ray players D EXT 3 Y Pb Pr and AUDIO L R Analogue audio and video input from analogue or digital devices such as DVD players or game consoles HDMI I Connections via DVI or VGA require an additional audio cable see Connect a computer on page 33 EN 31 English Side connector VIDEO Composite video input from analogu devices such as VCRs 5 use Data input from USB storage devices COMMON INTERFACE ta eo D AUDIO L R EE on PADI en Digital audio and video input from high Audio Iput fromanalogue devices definition digital devices such as Blu ra connected to VIDEO y players L
24. e Schweiz Svizzera Turkiye United Kingdom 0800 002 050 0800 261 3302 General No 0800 331 6015 General National Rate No 0870 911 0036 0 800 500 697 Schweizer Festnetztarif Tarif r seau fixe France Sehirici arama free National rate This information is correct at the time of press For updated information see www philips com support Contents 1 Notice 2 2 Important 4 3 YourTV 7 Side controls and indicators Remote control NON 4 Use your TV Switch your TV on off or to standby Switch channels Watch connected devices Adjust TV volume Use teletext O O 0 0 5 Use more of your TV Access TV menus Rename devices from the home menu Remove devices from the home menu Change picture and sound settings se the universal access menu se advanced teletext features reate and use list of favourite channels se the Electronic Programme Guide he TV clock se timers se TV locks 20 se subtitles 2 ew photos and play music from a USB storage device 22 Listen to digital radio channels 24 Update the TV software 24 Change TV preferences 25 A S OGON MON A Sa 0 decoder channel 26 art a TV demo 26 Reset the TV to factory settings 26 6 Install channels 27 Automatically install channels 27 Manually install channels 28 Rename channels 29 Rearrange channels 29 Test digital reception 29 7 Co
25. e number of the subtitle page with the Numeric buttons Press MHEG TELETEXT to switch off teletext Press SUBTITLE L gt The Subtitle mode menu appears oO A WN Select On to display subtitles always or On during mute to display subtitles only when audio is muted Press OK to enable subtitles N Repeat this procedure to enable subtitles on each analogue channel EN 21 English Select Subtitle mode gt Off to disable subtitles Enable subtitles on digital TV channels 1 When watching digital channels press SUBTITLE L gt The Subtitle mode menu appears 2 Select On to display subtitles always or On during mute to display subtitles only when audio is muted 3 Press OK to enable subtitles Select a subtitle language on digital TV channels Note When you select a subtitle language on a digital TV channel as described below the preferred subtitle language set in the installation menu is temporarily overruled Press MENU Press AY 4b to select Setup gt Features gt Subtitle language Press OK or gt to enter the list of available languages Press AY to select a subtitle language VUA Ww N Press OK to confirm Tip You can also access the Subtitle language menu while watching TV by pressing OPTIONS gt Subtitle language 22 EN View photos and play music from a USB storage device Cautio
26. ent of injury fire or power cord damage ever place the TV or any objects on the power cord To disconnect the TV power cord easily from the power outlet ensure that you have full access to the power cord at all imes TV hangs over When you disconnect the power cord always pull the plug never the cable Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never touch any part of the TV power cord or antenna cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures e TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care Avoid stationary images as much as possible Stationary images are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e o avoid deformations and colour fading wipe off water drops as soon as
27. es Press OK UIA WN EN 23 English Disconnect a USB storage device Caution Follow this procedure to avoid damage to your USB storage device 1 Press BACK to exit the USB browser 2 Wait for five seconds then disconnect the USB storage device Listen to digital radio channels If digital broadcasting is available digital radio channels are installed automatically during installation 1 When watching TV press OK to display he channel grid 2 Press OPTIONS 3 Press Av to select Select list gt Radio The radio channel grid appears 4 Press to select a radio channel and press OK to listen Note Select Select list gt All to exit radio channels and view all channels 24 EN Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available Check www philips com support for availability Check the current software version 1 Pres amp MENU 2 Press to select Setup gt Software update gt Current software info L gt The displays the current software information Download the software 1 on your PC open a web browser and go to www philips com support Download the latest software upgrade file to your PC 2 3 Decompress the ZIP file 4 Copy the autorun upg file to the root directory of the USB device Update soft
28. ess AY to select Lock channel or Unlock channel 5 For each selection press OK to lock or unlock the channel Ly The first time you lock or unlock a channel you are prompted to enter your PIN code 6 Enter your code and press OK L If the channel is locked a lock icon is displayed 7 Repeat the process to lock or unlock more channels Switch the TV off and on again for the change to take effect f you use P on your remote control to switch between channels the locked channels are skipped f you access the locked channels from the channel grid you are prompted to enter your PIN code Set parental ratings Some digital broadcasters rate their programmes according to age You can set your TV to display only programmes with age ratings higher than your child s age 1 Press amp MENU 2 Press AV to select Setup gt Features 7 Parental rating L gt A code setup screen appears J Enter your code using Numeric buttons Ly The parental rating menu appears Press to select an age rating Press OK to confirm Press amp MENU to exit Ov A Use subtitles You can enable subtitles for each T V channel Subtitles are broadcast via teletext or DVB T digital broadcasts With digital broadcasts you can select a subtitle language Enable subtitles on analogue TV channels Select an analogue TV channel Press MHEG TELETEXT Enter the three digit pag
29. format L gt The selected picture format is activated Unscaled For HD and PC mode only and in selected models only Allows maximum sharpness Some distortion may be present DE E J Press OK to confirm your choice Summary of picture formats The following picture settings can be due to the broadcaster s configured systems Set your PC resolution to wide screen Note mode for best results Depending on the format of the picture source some picture settings are not available EN 13 English Use smart sound Use smart sound to apply pre defined sound settings 1 Press SOUND L gt The Smart sound menu appears 2 Press AV to select the following settings e Custom Applies the settings that were customi Standard A sed in the sound menu djusts sound settings to suit most environments and types of audio News Appl ies settings for spoken audio such as news e Movie Appl ies settings for movies J Press OK to confirm your choice L gt The selected smart sound setting is applied Manually adjust sound settings 1 Press amp MENU 2 Press Av to select Setup gt Sound L gt The Sound menu appears J Press AVP to select the following settings Smart sound Accesses pre defined smart sound settings e Bass Adjusts the bass level e Treble Adjusts the treble level Digital audio lipsync Enables or
30. g codes 20 EN Lock or unlock the TV Lock the TV to prevent access to all channels and connected devices 1 Press amp MENU 2 Press to select Setup gt Features gt TV lock You are prompted to enter your PIN code 3 Enter your code using Numeric buttons L gt The TV lock menu appears 4 Press AY to select Lock or Unlock 5 Press OK to confirm L gt All channels and connected devices are locked or unlocked 6 Press amp MENU to exit Note Switch the TV off and on again for the change to take effect f you select Lock you have to enter your code every time you turn on your TV Lock the TV for a specific time 1 Press 2 Press AW to select Setup gt Features gt Lock after You are prompted to enter your PIN code Enter your code using Numeric buttons Select On L gt The feature menu appears A w Select Time then press OK UI Enter the time with the Numeric buttons or the Navigation buttons 7 Select Done L gt The automatically switches off at the specific time Note You have to enter your code every time you turn on your TV Switch the TV off and on again for the change to take effect Lock or unlock one or more channels 1 When watching TV press OK to display the channel grid Press AVP to select a channel to lock or unlock Press OPTIONS 2 3 4 Pr
31. h as solutions to riddles or puzzles e Cycle subpage Cycles through subpages automatically if subpages are available e Language Switches to a different language group to display a language correctly when it uses a different character set e Freeze page Freezes the current page e Dual screen Full Screen Enables and disables dual screen teletext J Press AV to select one ofthe following 4 Press to make a selection then press OK to confirm 5 Press gt BACK to exit the teletext options menu Select teletext subpages teletext page can hold several subpages Subpages are displayed on a bar next to the main page number 1 Press MHEG TELETEXT The teletext screen appears 2 Press P to select a teletext page 3 Press to enter a subpage EN 15 English Select T O P teletext broadcasts Table Of Pages T O P teletext broadcasts allow you to jump from one subject to another without using page numbers T O P teletext is not broadcast on all TV channels 1 Press MHEG TELETEXT L gt The teletext screen appears 2 Press INFO L gt The overview appears Press AY 4b to select a subject 3 4 Press OK to view the page Use Teletext 2 5 Teletext 2 5 offers more colours and better graphics than normal teletext If Teletext 2 5 is broadcast by a channel it is switched on by default 1 Pres amp MENU 2 Press Av to select Setup gt
32. he EPG options menu Use the EPG options menu to set or clear reminders change day and access other useful EPG options 1 Press GUIDE 2 Press OPTIONS L gt The EPG menu appears 3 Press AV to select one of the following options e Set remind Clear remind Sets or clears programme reminders e Change day Sets the EPG day Show info Displays programme information Search by genre Searches TV programmes by genre e Scheduled reminders Lists programme reminders Only available for upcoming programmes e Preferred EPG channels Sets preferred EPG channels Press OK to enter or activate the option Press gt BACK to exit the EPG menu Ui A Tip Press GUIDE to switch between EPG channel grid Use the TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Set the TV clock manually In some countries you need to set TV clock manually 1 Press amp MENU 2 select Setup gt Features gt Clock The Clock menu appears 3 Press AY 4b to enter time 4 Select Done to confirm 5 Press MENU to exit Note f your selected country supports digital broadcast the clock displays the time data from your TV service operator as priority Display the TV clock 1 when watching TV press amp OPTIONS The option menu
33. he channel grid allows you to view all available channels in a grid format 1 Press OK L gt The channel grid appears 2 Press to select and preview a channel 3 Press OK to watch the selected channel EN 9 English Watch connected devices Note Switch on the device before selecting it as a source on the Use the source button MENU FORMAT INCR SURR MHEG 27 537 i Feed ifowo DEMO SUBTRE mmm as amp as 1 Press SOURCE L gt The source list appears 2 Press AY to select a device 3 Press OK to confirm your choice L gt The switches to the selected device Adjust TV volume To increase or decrease volume e Press 21 To mute or unmute sound e Press to mute the sound e Press again to restore the sound 10 EN Use teletext MENU four DEMO slate sw 1 Press MHEG TELETEXT The main index page appears 2 Selecta page as follows Press the Numeric buttons to enter page number e Press P to view the next or previous page Press the Colour buttons to select a colour coded item ress gt BACK to return to a previously viewed page 3 Press MHEG TELETEXT to exit teletext w e U Note For UK users only Some d
34. heck that the devices are connected properly e Check that the picture settings are correctly set did not save your picture settings e Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small e Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device Sound issues There is a picture but sound quality is poor Note f no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected Check that the volume is not set to 0 e Check that the sound is not muted There is a picture but the sound quality is poor e Check that the sound settings are correctly set There is a picture but sound comes from one speaker only e Verify that sound balance is set to the centre HDMI connection issues There are problems with HDMI devices Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e fthe TV does not recognise the HDMI device and no picture is displayed try switching the source from one device to another and back again
35. highlighted channel to the desired location then press OK Press OPTIONS L gt Done reordering appears on the screen Press OK to confirm Press lt gt BACK to exit the channel grid CON OA UI Test digital reception You can check the quality and signal strength of digital channels This allows you to reposition and test your antenna or satellite dish 1 Press amp MENU 2 Press to select Setup gt Installation gt Channel installation gt Manual channel search m 3 Press gt to enter the menu 4 Press to enter the frequency of he channel you want to test 5 Press OK to confirm the frequency then press OK again to confirm Search 6 When complete select Store to store he frequency Note Ifthe signal quality and strength is poor reposition the aerial or satellite dish and retest f you still have problems with the reception of your digital broadcast contact a specialised installer EN 29 English 7 Connect devices This section describes how to connect devices with different connectors Examples are provided in the Quick Start Note You can use different types of connectors to connect a device to your TV Back connector EXT2 EXT1 CVBS RGB CVBS TV ANTENNA e OO DOOD OO OD LEFT RIGHT VGA DVI 30 EN 1 TV ANTENNA Signal input from an antenna
36. igital TV channels offer dedicated digital text services for example BBC 5 Use more of your TV Access TV menus Menus help you to install channels change picture and sound settings and access other features 1 Press amp MENU L gt The menu screen appears Add new device fr J Setup Watch TV 2 Press to select and navigate through one of the following menus e Watch TV Switches back to the aerial source if another source is selected e Add new device Adds new devices to the home menu Setup Accesses menus to change picture sound and other settings Press OK to confirm your choice Press amp MENU to exit Aw Tip After selecting Add new device follow the on screen instructions to select the correct device and connector Rename devices from the home menu After adding a new device to the home menu you can rename it to your preference 1 Press amp MENU 2 Press to select a device to rename J Press OPTIONS The options menu appears 4 Press AV to select Rename device then press OK Atext input box appears Press to select characters P ress OK to confirm each character Select Done then press OK to finish renaming devices NO UI Note The device name can be up to 16 characters long Press Aa to change an uppercase letter to a lowercase letter and vice versa
37. ings for your location home or shop Volume bar Displays the volume bar when you adjust the volume e Channel info Displays information about the TV channel every time you switch channels Select Full to view channel information or Off to turn off the channel information e Universal access Enables or disables the universal access menu e EasyLink Enables one touch play and one touch standby between EasyLink compliant devices e Pixel Plus Link Overrides the settings of connected devices and uses the settings of the TV Only available if EasyLink is switched on Teletext 2 5 Enables or disables Teletext 2 5 For digital TV E sticker For shop mode only Sets the location of the e sticker Press to select your preference Press OK Press MENU to exit EN 25 English Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection In this way you can select these channels by using the RC of your TV The decoder or a descrambler must be connected to EXT1 SCART Set decoder channel Map channels from a decoder or descrambler Press amp MENU Select Setup gt Installation gt Decoder Press gt to enter Decoder menu Press AY to select Channel then press gt to enter w N Select one channel to map to the decoder descrambler channel and press OK to confirm Select S
38. klijke Philips Electronics N V All rights reserved
39. ly handicapped OPTIONS Accesses options relating to the current activity or selection 8 OK Confirms an entry or selection and displays the channel grid when watching TV e 9 av Navigation buttons avigates menus INFO Displays program information when available If the information spans multiple pages press OPTIONS to go to the next page 1 Mute utes or restores volume 2 P Programme Switches to the next or previous channel When the TV menu is on this functions as Page Up Down 3 0 9 Numeric buttons Selects a channel or setting C PICTURE Smart picture Launches the picture menu 5 SOUND Smart Sound Launches the sound menu 24 l Volume Increases or decreases volume 7 BACK P P Previous channel Returns to a previous screen Returns to the previously viewed channel GUIDE Switches between channel grid and programme list SUBTITLE For RF Digital TV only Enables or disables subtitles DEMO Used in selected models only Toggles the demonstration menu on or off FORMAT Selects a picture format tz INCR SURR Enables Incredible Surround for stereo sources Enables spatial mode for mono sources Remote control usage When using the remote control hold it close o the TV and point it at the remote control sensor Make sure that the line of sight between the remote cont
40. mer 19 19 hearing impaired 15 one touch play 34 home mode 24 one touch standby 34 install channels parental rating 20 automatic 26 manual 27 K Kensington lock 35 42 EN connect 32 39 resolution 36 picture format change 13 troubleshooting 38 picture settings 12 PIN code 20 pixel plus link 24 power 36 power consumption 36 6 preferences 24 product specifications 36 R radio 23 rearrange channels 28 reception 28 38 recycle 5 register product 7 remote control batteries 36 5 overview 7 technical specifications 36 rename channels 28 reorder channels 28 resolution 36 restore default 25 S safety 4 screen care 5 settings picture 12 sound 14 12 settings assistant 12 shop mode 24 side connectors 31 slideshow view 22 with music 23 smart card 33 smart picture 12 smart settings 12 14 smart sound 14 software over the air download 24 update 24 version 24 sound settings 14 specifications 36 standby 9 subpages in teletext 15 subtitles language 21 on analogue channel 21 on digital channel 21 switch channels 9 on and off 9 source 10 T Table of Pages 6 technical specifications 36 teletext features 5 menu 5 subpages 5 Table of Pages 6 Teletext 2 5 6 use 0 time zone 8 timer on timer 19 19 sleep timer 9 standby 9 transmission 36 38 transporting 4 troubleshooting 38 TV lock lock channels 20 lock connected devices 20 PIN code 20 ratings lock 20 TV o
41. n Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device Use the USB connector to view photos or listen to music stored on a USB storage device 1 Turn on the T V 2 Connect the USB s orage device to the TV L gt The home menu appears Press AV to select Browse USB Press OK to confirm L gt The USB thumbnail browser appears e Press GUIDE to switch between thumbnail and file browsing views View photos 1 In the USB browser press gt to enter the Picture folder 2 Press to select a photo or a photo album J Press OK to view a full screen image of the photo Tip When in full screen mode press to move between photos View a slide show of your photos 1 When a full screen image of a photo is displayed press A slide show begins from the selected photo 2 Press the following buttons to control the slide show OKto pause the slide show e 4k to go back or move forward to the next image BACK to stop the slide show Change slide show settings 1 when viewing a slide show press OPTIONS L gt The slide show options menu appears 2 Press AV to select one of the following Start Slideshow Stop Slideshow Starts or stops a slide show e Slideshow transitions Sets the transition from one picture to the next
42. n stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that result in accident injury or damage of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Risk Risk Risk ever place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the he edge of the surface ever place the TV on tall furniture such as a bookcase without anchoring both he furniture and TV to the wall ora suitable support Educate children about the dangers of climbing on furniture to reach the TV of overheating ever install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV of damage to the TV Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is differ
43. nema Applies settings for movie viewing Game Applies settings for games e Energy saving Applies low energy settings e Natural Applies the best picture quality e Custom Lists customised picture settings 3 Press OK to confirm your choice L gt The selected smart picture setting is applied Manually adjust picture settings 1 Press amp MENU 2 Press to select Setup gt Picture J Press AY4 to select the following settings Smart picture Accesses pre defined smart picture settings Video contrast Adjusts the intensity of video contents keeping backlight unchanged e Contrast Adjusts the intensity of backlight areas keeping video contents unchanged e Brightness Adjusts the intensity and details of dark areas e Colour Adjusts colour saturation e Hue Compensates for colour variations e Sharpness Adjusts sharpness in the image e Noise reduction Filters and reduces noise in an image e Tint Adjusts the colour balance in an image e Custom tint Customises tint setting Only available if Tint gt Custom is selected e Digital Crystal Clear Fine tunes each pixel to match surrounding pixels This produces a brilliant high definition image Dynamic contrast Enhances contrast A Medium setting is recommended e Dynamic backlight Adjusts brightness of the TV backlight to match lighting conditions
44. nnect devices 30 Back connector 30 Side connector 32 Connect a computer 33 Use a Conditional Access Module 34 Use Philips EasyLink 34 Use a Kensington lock 35 8 Product information 36 Supported display resolutions 36 Multimedia 36 Tuner Reception Transmission 36 Remote control 36 Power 36 Supported TV mounts 37 Product specification 37 9 Troubleshooting 38 General TV issues 38 TV channel issues 38 Picture issues 39 Sound issues 39 HDMI connection issues 39 Computer connection issues 40 Contact us 40 10 Index 41 EN English 1 Not ice 2010 Koninklijke Philips Electronics N V Al rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electron ics N V or their respective owners Philips reserves the right to change products at any obliged to adjust earlier su The material in this manua adequate for the i If the product or its individ ntended time without being pplies accordingly is believed use of the system ual modules or procedures are used for purposes other than those specified herein con validity and suitabi warrants that the lity must firmation of their be obtained Philips material itself does not infringe any United States patents No further warranty is expressed or implied Warranty e Risk of injury damage to TV or void of warranty Never attempt to repair the TV
45. possible Disposal of your old product and batteries c Your product is designed and manufactured with high quality materials and components which can be recycled and reused A When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health A Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health EN 5 English Environmental efforts EUROPEAN UNION ECOLABEL XX x Ni x epe Award to goods or services which meet the environmental requirements of the EU eco labelling scheme NL 22 001 e High energy efficiency e Low standby power Designed to facilitate recycling Philips continuously focuses on lowering he environmental impact of its innovative consumer products We aim our effo
46. ress OK or P to enter Menu language Press AY to select a language Press OK to confirm ON UT w Press 4 to return to Installation menu Step 2 Select your country Select the country where you are installing the TV The available channels for the country are installed on the TV 1 Press amp MENU 2 Press Av to select Setup gt Installation gt Channel installation gt Automatic channel search U 3 Press OK or gt to enter the menu L gt The country menu appears Press to select your country Ui A Press OK to confirm your choice L gt The channel installation guide appears on the screen Step 3 Install channels Automatically installs the available analogue and digital TV channels and digital radio channels 1 From the channel installation guide screen select Full installation 2 Press OK to confirm L gt The starts to search and store all the available channels 3 When installation is complete press OK to exit the installation menu Update the channel list You can enable automatic update of channels when your TV is in standby mode The channels stored in your TV are updated every morning according to the channel information in the broadcast 1 Press amp MENU 2 Press Av to select Setup gt Installation gt Channel installation gt Standby update 3 Select On to enable the automatic update or select Off to disable i
47. rol and TV is not blocked by furniture walls or other objects 4 Use your TV This section helps you perform basic TV operations Switch your TV on off or to standby o ie 1 dd LJ To switch on e fthe standby indicator is off press Power at the side of the TV e If the standby indicator is red press Standby On on the remote control To switch to standby e Press Standby On on the remote control L gt The standby indicator switches to red To switch off e Press Power at the side of the TV L gt The standby indicator switches off El Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet e f you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV Switch channels e Press P on the remote control or P CH on the side of the T V e Enter a channel number using the Numeric buttons e Press OK to use the channel grid Press BACK P P on the remote control to return to the previous channel Note When you use a favourite list you can only select those channels in the list see Select a favourite list on page 16 Switch channels with the channel grid T
48. rts owards environmental improvements during manufacturing reduction of harmful substances energy efficient use end of life instructions and product recycling Thanks to our environmental effort this TV has been awarded the European Ecolabel the flower www ecolabel eu You can find detailed information on standby energy consumption warranty policy spare parts and recycling of this TV on the Philips website for your country at www philips com This TV has features that contribute to energy efficient use This TV was awarded the European Ecolabel for its environmental qualities Energy efficiency features e Ambient light sensor Available in selected models only To save energy the built in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Energy saving The energy saving setting of the TV combines several TV settings that result in saving energy See the smart settings in the setup menu Low standby power consumption The class leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely ow level without losing out on the constant standby functionality Power management Available in selected models only The advanced power management of this TV ensures the most efficient use of its energy You can check how your personal TV settings the level of brightness in current onscreen pictures and
49. t EN 27 English Manually install channels This section describes how to search and store analogue TV channels manually Step 1 Select your system Note Skip this step if your system settings are correct Press amp MENU 1 2 Press ava to select Setup gt Installation gt Channel installation gt Analogue manual install The Analogue manual install menu appears Press to select System then press gt to enter Press to select your country or region Press OK to confirm DU A Press 4 to return to Channel installation menu Step 2 Search and store new TV channels 1 Press amp MENU 2 Press to select Setup gt Installation gt Channel installation Analogue manual install The Analogue manual install menu appears J Press AV to select Search then press gt to enter 4 Press Av to manually enter the three digit frequency 5 Pres OK to begin search Ifa channel is unavailable at the selected frequency press OK to search for the next available channel 6 Press BACK when the new channel is found 28 EN Press AY to select Store as new channel to store the new channel under a new channel number Press OK to enter Store as new channel then press OK Press 4 to return to the Channel installation menu Step 3 Fine tune analogue channels 1 2 OUR Press MEN
50. tatus then press gt to enter Select EXT 1 SCART the connector used by the decoder descrambler Press OK Press MENU to exit NO Note Select None if you do not want to map to the decoder descrambler channel 26 EN Start a TV demo You can use demonstrations to better understand the features of your TV Some demos are not available on certain models Available demos are displayed in the menu list 1 Press DEMO on the remote control 2 Press to select a demo and press OK to view it 3 Press DEMO to exit Reset the TV to factory settings You can restore the default picture and sound ings of your TV The channel installation ings remain the same Press MENU Select Setup gt Installation gt Factory settings Press gt to enter Factory settings Select Reset to start resetting Press OK Press MENU to exit Nagg 6 Install channels The first time you set up your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to re install and fine tune channels Automatically install channels This section describes how to search and store channels automatically Step 1 Select your menu language 1 Press amp MENU 2 Press to select Setup gt Installation gt Language gt Menu language U P
51. the surrounding light conditions determine the relative power consumption End of use To inform yourself on the correct disposal ofthe TV and batteries refer to Disposal of your old product and batteries in the user manual see Disposal of your old product and batteries on page 5 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome This section gives you an overview of commonly used TV controls and functions Side controls and indicators is 6 0 1 Increases or decreases volume 02 ft Home Toggles the home menu on or off 3 P CH Switches to the next or previous channel 2 Power Switches the product on or off The product is not powered off completely unless it is physically unplugged 5 Standby indicator and remote control sensor Remote control PHILIPS TELEVISION EN English 1 Standby On e Switches the TV to standby if it is on _Switches on the TV if it is in standby 2 MENU Toggles the main menu on or off 3 MHEG TELETEXT Toggles teletext on or off SOURCE Selects connected devices Colour buttons Selects tasks or options AD Audio Descriptor For RF Digital TV only UK only Enables audio commentary for the visual
52. urite list Press OPTIONS L gt The channel options menu appears w N EN Select Mark as favourite then press OK The channel is added to the favourite list Note All favourite channels are marked by an asterisk in the channel grid Remove a channel from a favourite list 1 when watching TV press OK L gt The channel grid appears 2 Press to select a channel to remove J Press OPTIONS 4 Select Unmark as fav then press OK The channel is removed Use the Electronic Programme Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programmes being broadcast e View upcoming programmes e Group programmes by genre Set reminders when programmes start e Set up preferred EPG channels Switch on EPG 1 When watching TV press GUIDE L gt The EPG planner screen appears displaying information about the scheduled programmes Note EPG data is available only in selected countries and can take some time to load Use EPG 1 when watching TV press GUIDE L gt The EPG planner screen appears 2 Press amp MENU L gt The program guide menu appears 3 Press to select an option and then press OK to confirm Press amp MENU to exit the EPG menu A Note Only the channels in the Preferred EPG channels list appear in the EPG menu EN 17 English Use t
53. velop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Mains fuse UK only This TV is fitted with an approved moulded plug Should it become necessary to replace the mains fuse this must be replaced with a fuse of the same value as indicated on the plug example 10 1 Remove fuse cover and fuse 2 The replacement fuse must comply with BS 1362 and have the ASTA approval mark If the fuse is lost contact your dealer in order to verify the correct type J Refit the fuse cover In order to maintain conformity to the EMC directive the mains plug on this product must not be detached from the mains cord cable Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with ssued registrations and pending applications in other countries throughout the world I DOLBY DIGITAL PLUS Manufactured under licence from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Note Available in selected models only HDMI the HDMI logo and High Definition
54. verview 7 U universal access menu 15 USB disconnect USB 23 listen to music 23 update software 24 EN 43 English view photos 22 V video format technical specifications 36 volume adjust 10 automatic levelling 14 delta 14 mute 10 34 W wall mount 4 37 44 Information about how to re tune your TV during the TV switchover Keep this user manual safe you ll need it m Television in the UK is going digital bringing us all more choice and new services Starting in late 2007 and ending in 2012 television services in the UK will go completely digital TV region by TV region Please see the next page to find out when your area switches to digital Digital UK is the independent non profit organisation leading the process of digital TV switchover in the UK Digital UK provides im partial information on what people need to do to prepare for the move to digital and when they need to do it 45 How the switchover affects your TV equipment Your new TV has a digital tuner built in which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket check if you can get digital TV through your aerial now or whether you ll have to wait until switchover at www digitaluk co uk When the TV switchover happens in your area there are at least two occasions when you will need to re tune your TV in order to continue receiving your existing
55. ware You can update the TV software via a USB storage device or OAD Over the Air software Download Update using a USB device Connect your USB storage device to the TV 1 Ifthe software update screen does not appear automatically select Setup gt Software update gt Local updates gt USB ress to update the software 2 Press OK to update the TV sof manually 3 Follow the on screen instructions to complete the update Note The TV restarts after the software update is complete Update using OAD 1 If using DVB T digital broadcast your TV automatically receives software updates If you receive a message on your screen asking you to update your software Select Update now to update the software immediately Select Remind me later to exit the update screen at that time and be reminded later e Select Cancel to skip the update 2 rf you select Cancel you can manually access the OAD update by selecting Setup gt Software update gt Local updates gt OAD 3 Select the available version of OAD and press OK the update Note Follow the on screen instructions to start The TV restarts after the software update is complete Change TV preferences Use the preferences menu to customise your TV settings 1 2 Ui A w Press MENU Select Setup gt Installation gt Preferences e Location Optimises TV sett
Download Pdf Manuals
Related Search