Strong SRT 6202
Contents
1. Format partition function will format current partition Format Disk function will format your USB disk all partitions Format functions will delete all records data and information from your USB device STRONG will not take any responsibility for damaged or lost data on the USB device USB Preference In this menu you can enable disable use of Timeshift function enable disable recording by one time press to REC button and set default recording period in hours HH MM format 5 5 4 Gomoku Play the game Gomoku on your receiver Use the on screen help tips to set and play the game 5 5 5 Calendar To display the built in calendar 6 0 WATCHING TV AND LISTENING TO THE RADIO 6 1 Program Information In normal operation mode no menu operation press INFO The program information banner will be displayed showing channel number channel name current next program name if available from broadcast and current time 11 www strong tv gt 7RONG PART 1 English DIGITAL TV To view technical information about the current channel press INFO twice In Program Information menu the receiver will display the current program information such as satellite name program name and number local frequency polarity 22K tone DiSEqC down frequency symbol rate video PID and audio PID and also the signal strength and signal quality of the current program 6 2 Recording Information During a record press INFO to display o2. t receive commands from the remote control for a given period of time Possible settings are 1 6 Hours and Disable The default setting for Auto Standby is 3 hours To avoid the automatic switch off set Auto Standby to Disable 5 3 1 5 Set Factory Default Please be careful when using this function as it will erase all the data and parameters you may have set earlier Once you set the factory default you will have to re install your preferences and re scan channels To reset your receiver to factory default apply the following steps Select Set Factory default and press OK Confirm the warning message with OK and press OK The receiver will return to its factory default state and all user data will be deleted Note lYour PIN code will change back to the factory setting 0000 5 3 2 OSD Style Use this menu to set the Menu Colour Transparency Level and Border Pattern 5 3 3 Parental Control Use this menu to set Channel lock status ON or OFF the Menu lock status Parental setting and Change PIN code The default PIN code is 0000 Channel Lock Set the system channel lock to ON or OFF If lock is ON a locked channel can only be watched after entering the parental PIN Menu Lock Press OK to select whether the menu should be locked or not YES or NO and press OK to confirm If the menu lock is ON some operations such as search program and set factory default can only be accessed after entering the PIN Parental Setting Ifa
3. BIRD satellite Press AY to select the ASTRA or HOT BIRD satellite and press OK Follow the instructions When you have fixed your dish at the correct position choose NEXT and press OK The Channel Setup menu will appear Note If OSD language German and satellite Astra 19 2E is chosen the receiver will automatically load German pre installed channels at the beginning of the channel list If OSD language Italian and satellite HOT BIRD 13E is chosen the receiver will automatically load Italian pre installed channels at the beginning of the channel list b Your dish is aimed at another satellite Select Other in Select satellite menu and press OK A list of satellites will be listed If you select one out of the satellite list the Configure Antenna menu will appear Use this menu to set the www strong tv STRONG PART 1 o English DIGITAL TV LNB Type LNB Low Freq LNB High Freq Band control Polarisation control DiSEqC Switch and Antenna mode 4 3 Antenna mode a Fixed dish Set Antenna mode to Fixed select NEXT and press OK The Adjust antenna screen appears Select a transponder receivable at your location and adjust the antenna position for maximum signal strength and quality levels When adjustment is completed choose NEXT and press OK The Channel Setup menu will appear b Dish mounted on DiSEqC 1 2 motor Set Antenna mode to DiSEqC 1 2 choose NEXT and press OK The menu Adjust antenna will ap
4. TV Settings and Time Setting 5 3 1 Preference 5 3 1 1 Language Setting Use this option to change the language of the OSD preferred audio and subtitles Use AY to select OSD language Audio language or Subtitles language Press OK or P to enter the language list and use A to select the language Press OK to confirm 5 3 1 2 TV settings Use this option to set the TV mode Screen mode Video output and Modulator settings TV mode Press OK or P to select mode and OK to confirm If you don t know your TV s standard select AUTO Screen mode Press OK or P to select 4 3 or 16 9 and OK to confirm Video output Press OK or P to select CVBS or RGB and OK to confirm Modulator settings Use AT to select RF Audio mode or RF channel Use lt P to change the settings and press OK to confirm or EXIT to cancel the settings only SRT 6205 5 3 1 3 Time Settings If a broadcaster provides GMT you can set the time using GMT or set the time manually If the GMT usage is ON you need to set the Time Zone If you set GMT Usage to OFF Set Data and Set Time are displayed To set the time value manually move the cursor to the time item and use the numeric buttons on the remote control 8 www strong tv PART 1 English lt gt 7RONG DIGITAL TV 5 3 1 4 Auto Standby This option allows you to set the desired Auto Standby time or to disable Auto Standby Auto Standby will switch the receiver to standby automatically when it doesn
5. channel is locked it can only be watched after entering the parental PIN code Use AT to select the channel you wish to lock Press OK to lock the channel Change PIN To change the PIN please enter and re enter the desired 4 digit code The system PIN will then be changed to the new PIN 5 3 4 System info Shows information about your receiver such as software and user interface version 5 3 5 System Update Options are OAD Update by USB or Backup to USB m Over Air Download OAD Select this option in order to update your receiver with the latest software version Software update service is available from satellite ASTRA 19 2E Note If needed parameters can be changed Please ask your local STRONG dealer in case software update was not successful m Update by USB www strong tv STRONG PART 1 o English DIGITAL TV a Download the required update file for your receiver model from our website www strong tv gt Support b Unzip the file copy it to your USB device and connect it to the USB port of receiver c Select Update by USB then the update file and press OK NEVER power off your receiver during update process and flashing data Do not unplug the USB device during update This may cause damage to the receiver and will void warrenty d Once the update is completed the receiver returns to normal viewing mode and is ready to use Backup to USB This option can be used to store your set
6. to your TV set using RCA cable 8 Audio L R RCA To connect to your TV set or amplifier using RCA cable 9 S PDIF Digital audio output To connect to the input of your digital audio amplifier 10 Power Cord Your receiver requires a mains voltage of 100 240 V AC Auto selectable 50 60Hz 5 Make sure to check the power specification before connecting your receiver to the wall outlet only SRT 6205 only SRT 6202 and SRT 6205 2 2 Remote Control Unit O X Fig 3 Turns the receiver On Stand by Mutes audio output of the receiver 0 9 Changes channel and controls numeric functions AV Toggles between TV and receiver AV mode TV R Toggles between TV or radio mode MENU Shows the main menu and exits from any level of menu to view mode EXIT Exits from the menu or sub menu and cancels the progressing function if applicable AV Changes the current program to the previous next program in TV mode Moves the cursor upward downward in menu mode lt gt Increases decreases the volume level in TV mode Changes the setting values in specific menu item in menu mode OK Activates the highlighted menu item Displays a channel list according to TV radio mode in TV mode FAV Toggles favourite mode ON OFF EPG Shows the EPG Electronic Program Guide when menu is off V V Increases decreases the receiver volume level INFO Shows information banner AUDIO Selects available audio language s for the watched channel Selec
7. 0 Hz Power consumption max 20 W with external memory device Stand by power consumption 1 00 W without external memory device Operating Temperature 0 C 40 C Storage Temperature 30 C 80 C Operating Humidity Range 10 85 RH Non condensing Size WxDxH in mm 230 x 165 x 45 Weight ca 0 8 kg 14 www strong tv
8. RRECT OPERATION MAY CAUSE UNREPAIRABLE DAMAGE TO THE RECEIVER 1 DO NOT POWER OFF THE RECEIVER DURING THE DOWNLOADING PROCESS 2 DO NOT PLUG IN OR REMOVE THE USB DEVICE WHEN THE RECEIVER IS POWERED ON 5 4 Timer You may set a timer to let the receiver perform designated actions Use AW to select timer Press OK to enter the selected timer settings Press RED to activate or inactivate the selected timer 10 www strong tv PART 1 English lt gt 7RONG DIGITAL TV 5 5 Multimedia The receiver can play back records you have recorded from TV and play music and show pictures from a connected USB device You can play Gomoku or check the days in the calendar 5 5 1 My Album The receiver is able to show pictures in JPEG and BMP formats Use navigation buttons and help tips to select pictures and display them 5 5 2 My Music The receiver is able to play audio files in MP3 and WMA formats Use navigation buttons and help tips to select and play music files 5 5 3 My Records Menu My Records contains following submenus Recorded List Recording device Recording preference Recorded List This menu displays list of records and details of the records Use navigation buttons and help tips to select and play your records USB device This menu allows you to check the available space on your USB device format it if necessary If you have several partitions on your USB device you can select the partition to be used WARNING
9. al USB devices a It is recommended to use USB 2 0 storage devices If your device is not compatible to USB 2 0 specifications recording playback and other multimedia functions of the receiver would not work properly m To ensure best performance of your USB storage device please format it by this receiver menu Recording Device to FAT32 system Other file systems are not supported by the receiver m STRONG cannot guarantee compatibility to all types of USB storage devices It is advised not to store important information on USB storage devices used with the receiver Always make backups of data on USB storage device before usage with receiver STRONG will not take responsibility for any loss of information or circumstances caused by loss of information 2 0 YOUR RECEIVER 2 1 Rear Panel Fig 2 1 TO TV To connect to your TV using a coaxial cable or if you have a cable connected to the ANT input from your TV 2 ANT IN To connect to your terrestrial antenna or cable TV using coaxial cable 3 SAT OUT To connect an extra receiver to the satellite signal from dish 4 SAT IN To connect to the LNB for satellite signal from dish www strong tv 3 STRONG PART 1 o English DIGITAL TV 5 TV SCART To connect to your TV set using a SCART cable 6 VCR SCART To connect to your DVD or video recorder using a SCART cable The video signal will be looped through to your TV set if receiver is in stand by mode 7 Video RCA To connect
10. be added to the channel list If mode is Free Scrambled all channels from the selected satellite will be added Press YELLOW to set the Blind Scan to ON or OFF The Blind scan function is useful when scanning a newly added satellite Please note that Blind scan will take more time than the normal scan process www strong tv STRONG PART 1 o English DIGITAL TV Use BLUE to set the scan type to NIT OFF or NIT ON if Blind Scan is set to OFF or to Quick Search or Detail Search if Blind Scan is set to ON Once set up is completed press RED to start the scan 5 2 3 Manual Scan In Manual Scan you can scan a single transponder add a new transponder edit or delete a transponder Use the RED button to switch between satellites Scan transponder Use AT to select the desired transponder Press OK to start the scan Add Transponder Press GREEN the Add Transponder sub menu will appear Frequency input the frequency of the new transponder Symbol Rate input the symbol rate of the new transponder Polarity Select the Polarity of the new transponder Edit Transponder Press YELLOW the Edit Transponder sub menu will appear This menu is similar to Add Transponder menu Delete Transponder Press BLUE to delete a transponder You will be asked to confirm this operation Use lt P to select OK press OK to confirm 5 3 System setting Use this menu to configure system settings such as Language Setting OSD Style Parental Control
11. e Remedy No picture The receiver can t receive the signal Check the antenna cable replace the cable or connect the cable to the receiver tightly Incorrect values of some tuner parameters Set the values of the tuner parameters correctly in the installation menu Wrong direction of the dish Check the signal strength with a spectrum analyzer and adjust your dish correctly Receiver tries to start up switches ON OFF ON OFF or displays LOAD Receiver detected short cut in your cable system or detected Antenna Power Overload Disconnect receiver from main power Check your cable system Remove short cut Replace LNB Restart receiver The remote control does not work The USB storage device is not recognized The batteries of the remote control are not inserted or exhausted Wrong formatted Check whether the batteries are inserted correctly in your remote control Check the batteries and if exhausted replace the batteries in the remote control Format USB device by receiver in menu Recording Device The external USB HDD does not start Power consumption is too high Connect extra power supply adaptor to your USB HDD The receiver switches off automatically Auto Standby function enabled Disable Auto Standby See section 5 3 1 4 for details A 2 SPECIFICATIONS General Data Input Voltage Range 100 240 V AC 50 6
12. e channel list mode press FAV The favourite channel list will appear Press RED or FAV to highlight selection of group Use lt P to select the desired group Select group NO FAV and press OK to exit from favourite channel list mode 6 5 Selection Audio Language Press AUDIO to select the audio language Select Audio Channel or Sound mode with AW and Audio channel number or Sound mode Stereo Left or Right channel Press OK to confirm your selection Your selection will be memorized for the current channel From now on the Receiver will always play the last selected audio track when you select this channel NOTE Audio tracks containing AC3 can only be listened to if the receiver is connected to a digital audio amplifier and this amplifier is switched ON and set to the correct input 12 www strong tv PART 1 English lt gt 7RONG DIGITAL TV 6 6 TELETEXT function Press TEXT in normal viewing mode and AW to increase or decrease the displayed page number Use numeric buttons to input a page directly 6 6 Subtitles function Press SUB in normal viewing mode If the current channel broadcasts subtitle information the Subtitle Language selection menu will appear Use lt P to select between DVB and Teletext subtitles Use A W to select subtitle language and press OK to confirm 6 8 Recording Connect an external USB storage device to the USB port Wait until message appeared that device is recognized Selec
13. en the MAIN MENU press MENU 5 1 Channel Organiser In MAIN MENU press AT to move to Channel Organiser and press OK to enter the Channel Organiser menu It consists of sub menus Channel Manager and Favourites Manager 5 1 1 Channel Manager You can change the order of the channels move delete and edit channels To change the satellite use the RED button Sort GREEN button You can sort channels by Name a z Name z a Free CA Fav NO Fav or Frequency Low High Edit YELLOW button Select the channel you want to edit and press YELLOW Edit to move into the modify program menu to modify Program Name Frequency Symbol www strong tv PART 1 English lt gt 7RONG DIGITAL TV rate Video PID Audio PID Move channel Press AW to highlight the desired channel press lt P to highlight Move and press OK to confirm selection of the channel Use AW to move the channel to its new location and press OK to confirm Repeat this for every channel you want to move Delete channel Press AW to highlight the desired channel press lt P to highlight Del and press OK to mark the channel for deletion Press EXIT and confirm the channel s deletion by selecting OK and pressing OK Delete all channels To delete all channels from current satellite press BLUE Del All You will be asked to confirm this operation 5 1 2 Favourites Manager Press AW to select the desired channel and lt gt t
14. hy TRONG Digital Satellite Receiver SRT 6200 SRT 6202 SRT 6205 DIGITAL TV Picture similar User Manual ech a BaN igital Recorder BMP Channels TV Info SRT 6202 6205 SRT 6205 www strong tv Fig 1 LD Fig 2 SRT 6200 COAXIAL SRT 6202 SRT 6205 Fig 3 Fixed Satellite TELEVISION a i Dish Fixed Satellite Dish Fig 6 Fixed Satellite Dish 1 ex pointed at Astra Fixed Satellite HotBird Dish 2 ex pointed at gt USB device PART 1 English lt gt 7RONG DIGITAL TV TABLE OF CONTENTS 1 0 INTRODUCTION 1 1 Safety Instructions 1 2 Storage 1 3 Equipment Set up 1 4 Accessories 1 5 Usage of external USB devices 2 0 YOUR RECEIVER 2 1 Rear Panel 2 2 Remote Control Unit 2 3 Default PIN code 0000 WWwnnn np ww 3 0 CONNECTIONS 3 1 Basic connection with SCART cable 3 2 Connecting to Satellite Dish 3 3 Connecting USB device uw 4 0 STARTING UP 4 1 Language Selection 4 2 Select Satellite 4 3 Antenna mode 5 0 MAIN MENU 5 1 Channel Organiser 5 2 Installation 5 3 System setting ONDA OUUU 6 0 WATCHING TV AND LISTENING TO THE RADIO m A 1 TROUBLE SHOOTING w A 2 SPECIFICATIONS _ K STRONG declares that this item complies with the basic requirements and
15. o highlight the favourite group Press OK to add the selected channel to the favourite group Repeat this operation to remove the channel from the favourite list 5 2 Installation The installation menu consists of sub menus Antenna Installation Auto Scan and Manual Scan 5 2 1 Antenna Installation You can add edit and delete a satellite in this menu Add satellite Press the RED button A satellite list will appear Use to select the desired satellite If the desired satellite is not in the list select NEW SAT1 After selection of a satellite the Configure Antenna menu will appear Use this menu to set the LNB Type LNB Low Freq LNB High Freq Band control Polarisation control DiSEqC Switch and Antenna mode Further steps of the installation process are described in chapter 4 2 Edit satellite If the parameters of a satellite were changed or if you wish to add a new satellite you must set the parameters of the satellite such as LNB type LNB low Freq LNB High Freq Transponder LNB Power 22k Tone DiSEqC and Antenna Mode The sequence of editing satellite parameters is the same as the sequence of Add satellite described in chapter 4 2 Delete satellite If you want to delete a satellite from the list press YELLOW A warning message will appear Select OK and press OK to confirm 5 2 2 Auto Scan Use GREEN to set the scan mode to Free or Free Scrambled If mode is Free only Free to Air channels will
16. o protect against electric shocks and moisture When unpacking it make sure that all the parts are included and keep the packaging away from children For transporting the receiver from one place to another or if you are returning it under warranty conditions make sure to repack the receiver in its original packaging with its accessories Failing to comply with such packaging procedures could void your warranty 2 www strong tv PART 1 o English lt gt 7RONG DIGITAL TV 1 3 Equipment Set up We recommend you consult a professional installer to set up your equipment Otherwise please follow the instructions below m Refer to the user manual of your TV and your antenna m Make sure that the SCART cable and outdoor components are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver The following symbols will serve as follow A WARNING Indicates warning information Tips Indicates any other additional important or helpful information MENU Represents a button on the remote control or the receiver Bold Character Move to Represents a menu item within a window Italic Character 1 4 Accessories m User s Manual m 1 Remote control unit m 2x Batteries AAA type Note The batteries should not be recharged disassembled electrically short circuited be mixed or used with other types of batteries 1 5 Usage of extern
17. other relevant regulations of directives CE 2004 108 EEC and 73 23EEC RoHS 2002 95EEC 0 14 Min from G 0 42 Min max 0820 400 150 0 12 Min from Austrian wired line IE 0826 029 928 0 14 Min from French wired line Subject to alterations In consequence of continuous research and development technical specifications design and appearance of products may change All product names are trademarks or registered trademarks of their respective owners STRONG 2010 All rights reserved 03 2010 per March 2010 HOTLINE www strong tv 1 STRONG PART 1 o English DIGITAL TV 1 0 INTRODUCTION 1 1 Safety Instructions DO NOT INSTALL YOUR RECEIVER m In a closed or poorly ventilated cabinet directly on top of or under any other equipment on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES m To direct sunlight or near any other equipment that generates heat to rain or intense moisture to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects such as loudspeakers transformers etc Do not use a damaged power cord It may cause a fire or an electrical shock Do not touch a power cord with wet hands It may cause an electric shock m When the receiver is not used for a long period of time you should unplug the power cord from the wall socket Do not use alcohol or ammonia based liq
18. pear Select a transponder receivable at your location choose Transponder field and select transponder with lt P Then choose the Move Dish field and adjust the position of the dish with the lt P buttons Once the dish is adjusted to the desired position select Store position and set the number of the position with the lt P keys Then choose NEXT and press OK The Channel Setup menu will appear c Dish mounted on GOTO X motor Set Antenna mode to GOTO X choose NEXT and press OK The menu Adjust antenna will appear Select a transponder receivable at your location choose Transponder field and select transponder with lt P Then select the field My Longitude and enter the value of your longitude with the numeric keys Use lt P to select hemisphere East or West Then select My Latitude and use the numeric buttons to enter the value of your latitude Use lt P to select hemisphere Nord or South Select Goto Position and press OK Your dish will be turned to the position of the satellite Select NEXT and press OK The Channel Setup menu will appear Select NEXT and press OK to start the scan When the scan is completed the receiver will save the services information automatically and exits to normal viewing mode 5 0 MAIN MENU All the important settings and features of your receiver can be operated in Main Menu It consists of the sub menus Channel Organizer Installation System setting Timer and Multimedia To op
19. r remove the record duration banner 6 3 EPG Electronic Program Guide The EPG shows the program schedule for all services broadcasting EPG information Note not all broadcasters provide programme information In normal viewing mode press EPG and then A to choose the channel Press P to display the schedule for the current channel In EPG programme schedule menu Use AT to highlight the program items Use lt gt to get programme schedules for the previous or next day Press EXIT to return to EPG Menu For details of the current program press GREEN In programme details Use AW to scroll to the previous or next information page Press 4 or EXIT to return to the EPG schedule menu Programming Timer from EPG To set an event timer press RED or OK from the EPG program schedule To set a timer event Use AW to move the cursor to the program for which you want to add a timer Press RED to add a timer It is possible to modify each value To save the settings press OK To quit event timer setup press EXIT 6 4 Changing channel list mode between TV Radio and Favourite To change between TV and radio channel lists use TV R in normal viewing mode or in channel list mode To change channel list to favourite in normal viewing mode press FAV Use P to select the favourite group press OK to confirm selection Now select the desired channel and press OK to switch to full screen mode To select another favourite group or to exit from favourit
20. t a channel radio or TV you would like to record Press to start a record Press IM to stop 6 9 Playback of records From no menu state press Play button to display list of records Select the record you want to playback with AW and press OK twice The playback starts Press the 44 or bb to jump fast To speed up press more times Press II to pause the playback to resume playback press again A 1 TROUBLE SHOOTING There may be various reasons for occurring abnormal operation of the receiver Check the receiver according to the procedures shown below If the receiver does not work properly after checking it please contact the dealer Don t open the receiver cover This may cause a dangerous situation and will void warranty Cause Remedy The display on front The power cord is not plugged in Check that the power cord is panel does not light plugged into the wall outlet up Receiver is in stand by mode Switch ON receiver Your model is without display Your model is without display No picture or sound Wrong connection of the Audio Connect the Audio video output of Video output of the receiver to TV _ the receiver to TV correctly Audio muting Press the Mute button Audio selection is on AC 3 Press AUDIO button and select other audio channel TV power off wrong channel or Turn on TV select correct channel input or input 13 www strong tv STRONG PART 1 e English DIGITAL TV Caus
21. tings channels or the complete software It can be helpful to re load your channels after a factory reset or to load the channel order to more receivers a Connect an USB device to the USB port of receiver b Select Backup to USB and press OK c Choose between Loader App or User Database and press OK to start the back up process Loader App will backup system software while User Database will back up the channel database and settings NEVER power off your receiver during the backup process Do not unplug the USB device during the backup This may cause damage to the receiver and will void warrenty d Once the backup is completed the receiver returns to System Update menu e File Idapp1 ssu will be created on the USB device if Loader App has been selected resp file userdb ssu if User Database has been selected m To restore user data a Connect the USB device with backup of database to the USB port of receiver b Go to System Setting System Update and select Update by USB c Select a file with database backup The default name of the file is userdb ssu and press OK d Confirm update NEVER power off your receiver during update process Do not unplug the USB device during update This may cause damage to the receiver and will void warranty e When update of database is completed the receiver will start with channel 1 on screen A WARNING INCO
22. ts stereo left mono or right mono s ZOOM Zooms in selected part of TV video P P Page up and down in menu list SAT RED Selects satellite lists in channel list mode TEXT GREEN Shows current service s teletext on OSD SUB YELLOW Shows list of subtitled languages available within current channel RCL BLUE Recalls the last viewed channel Ul Freezes resumes video or playback dl Jump backwards during playback I gt Jump forwards during playback 4 www strong tv PART 1 English lt gt 7RONG DIGITAL TV Recording No function Play Fast backward Fast forward mzyve Stop 2 3 Default PIN code 0000 3 0 CONNECTIONS 3 1 Basic connection with SCART cable Fig 4 3 2 Connecting to Satellite Dish Connecting a fixed satellite dish to your receiver Fig 5 Connecting multiple fixed dishes to your receiver using a DiSEqC 1 0 switch Fig 6 3 3 Connecting USB device Fig 7 4 0 STARTING UP Ensure your satellite signal is of good quality It is recommended that you perform the first time installation following the Installation Wizard step by step It will help you to easily achieve system configuration and channel installation 4 1 Language Selection Press AW to choose your language press OK to confirm The Select Satellite menu will appear Further installation steps are depending on the satellite where your dish is aimed at 4 2 Select Satellite a Your dish is aimed at Astra 1C 1E 1F or HOT
23. uids to clean the receiver If you wish you may clean your receiver with a soft lint free cloth slightly made damp with a mild soap solution only after disconnecting from the mains voltage supply Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside SAFETY PRECAUTIONS m Never open the receiver cover It is dangerous to touch the inside of the receiver due to high voltage currents and possible electrical hazards and your warranty will be void Refer all maintenance or servicing to suitably qualified personnel m When you are connecting cables be sure that the receiver is disconnected from the mains supply voltage Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment m It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver If the receiver does not operate normally even after strictly following the instructions in this user manual it is recommended to consult your dealer 1 2 Storage Your receiver and its accessories are stored and delivered in a packaging designed t
Download Pdf Manuals
Related Search