Home

TP-LINK TL-WR740N Wi-Fi Ethernet LAN White router

1. select Static IP The Static IP settings page will appear shown in Figure 4 8 WAN WAN Connection Type IP Address subnet Mask 000d Default Gateway 0 0 0 0 Optional MTU Size in bytes 1500 The defaultis 1500 do not change unless necessary Primary DNS 0 0 0 0 Optional secondary DNS 0 0 0 0 Optional Oo Save Figure 4 8 WAN Static IP gt IP Address Enter the IP address in dotted decimal notation provided by your ISP gt Subnet Mask Enter the subnet Mask in dotted decimal notation provided by your ISP usually is 255 255 255 0 gt Default Gateway Optional Enter the gateway IP address in dotted decimal notation provided by your ISP gt MTU Size The normal MTU Maximum Transmission Unit value for most Ethernet networks is 1500 Bytes It is not recommended that you change the default MTU Size unless required by your ISP gt Primary Secondary DNS Optional Enter one or two DNS addresses in dotted decimal notation provided by your ISP Click the Save button to save your settings e TL WR740N Wireless Lite N Router Lite N Router 3 If your ISP provides a PPPoE connection select PPPoE option And you should enter the following parameters Figure 4 9 WAN WAN Connection Type PPPoE w PPPoE Connection User Name username Password Secondary Connection Disabled Dynamic Static IF Wan Connection Mode Connect on Dema
2. DDNS Service Provider Domain Name Domain Name Domain Name Domain Name Domain Name User Name Password Connection Status userfame Enable DONS DONS not launching Figure 4 67 Comexe cn DDNS Settings To set up for DDNS follow these instructions 1 Enter the Domain Names your dynamic DNS service provider gave 2 Enter the User Name for your DDNS account 3 Enter the Password for your DDNS account 4 Click the Login button to login the DDNS service Connection Status The status of the DDNS service connection is displayed here Click Logout to logout the DDNS service 4 15 2 Dyndns org DDNS If the dynamic DNS Service Provider your select is www dyndns org the page will appear as shown in Figure 4 68 276 TL WR740N Wireless Lite N Router Lite N Router DDNS Service Provider Dyndns www dyndns org Go to register User Name username Password Domain Name Enable DONS Connection Status DONS notlaunching Figure 4 68 Dyndns org DDNS Settings To set up for DDNS follow these instructions 1 Type the User Name for your DDNS account 2 Type the Password for your DDNS account 3 Type the Domain Name you received from dynamic DNS service provider here 4 Click the Login button to log in to the DDNS service Connection Status The status of the DDNS service connection is displayed here Click Logout to logout of the DDNS se
3. DMZ Host IP Address 192 166 1 169 Figure A 6 DMZ How to enable H323 ALG Log in to the Router click the Security menu on the left of your browser and click Basic Security submenu On the Basic Security page check the Enable radio button next to H323 ALG Remember to click the Save button 03 2 TL WR740N Wireless Lite N Router Lite N Router Basic Security Firewall SPI Firewall 6 Enable Disable VPN PPTP Passthrough Enable Disable L2TP Passthrough Enable Disable IPSec Passthrough Enable Disable ALG FTP ALG Enable Disable TFTP ALG Enable Disable H323 ALG Enable JO Disable Figure A 7 Basic Security 4 Iwant to build a WEB Server on the LAN what should I do 1 Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router you must change the WEB management port number to avoid interference 2 Tochange the WEB management port number Log in to the Router click the Security menu on the left of your browser and click Remote Management submenu On the Remote Management page type a port number except 80 such as 88 into the Web Management Port field Click Save and reboot the Router Remote Management Web Management Port Remote Management IP Address 0000 Enter 255 255 255 255 for alli Figure A 8 Remote Management cf Note If the above configuration takes effect configure t
4. Disable L2TP Passthrough Enable Disable IPSec Passthrough Enable Disable ALG FTP ALG Enable Disable TFTP ALG Enable Disable H323 ALG Enable Disable SAWE Figure 4 38 Basic Security gt Firewall A firewall protects your network from the outside world Here you can enable or disable the Router s firewall e SPI Firewall SPI Stateful Packet Inspection also known as dynamic packet filtering helps to prevent cyber attacks by tracking more state per session lt validates that the traffic passing through the session conforms to the protocol SPI Firewall is enabled by factory default If you want all the computers on the LAN exposed to the outside world you can disable it gt VPN VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec PPTP or L2TP protocols to pass through the Router s firewall e PPTP Passthrough Point to Point Tunneling Protocol PPTP allows the Point to Point Protocol PPP to be tunneled through an IP network To allow PPTP tunnels to pass through the Router keep the default Enabled e L2TP Passthrough Layer 2 Tunneling Protocol L2TP is the method used to enable Point to Point sessions via the Internet on the Layer 2 level To allow L2TP tunnels to pass through the Router keep the default Enabled e IPSec Passthrough Internet Protocol Security IPSec is a suite of protocols for ensuring private secure communication
5. MAC 3 MAC 4 Your PCs MAC Address Figure 4 40 Local Management By default the radio button All the PCs on the LAN are allowed to access the Router s Web Based Utility is checked If you want to allow PCs with specific MAC Addresses to access the Setup page of the Router s Web Based Utility locally from inside the network check the radio button Only the PCs listed can browse the built in web pages to perform Administrator tasks and then enter each MAC Address in a separate field The format for the MAC Address is XX XX XX XX XX XXK X is any hexadecimal digit Only the PCs with MAC address listed can use the password to browse the built in web pages to perform Administrator tasks while all the others will be blocked After click the Add button your PC s MAC Address will be placed in the list above Click the Save button to save your settings fe Note If your PC is blocked but you want to access the Router again use a pin to press and hold the Reset Button hole on the back panel for about 5 seconds to reset the Router s factory defaults on the Router s Web Based Utility 4 9 4 Remote Management Choose menu Security Remote Management you can configure the Remote Management function in the screen as shown in Figure 4 41 This feature allows you to manage your Router from a remote location via the Internet 58 TL WR740N Wireless Lite N Router Lite N Router Remote Management Web M
6. Wireless Lite N Router Lite N Router Internet Protocol TCP IP Properties x General You can get IF settings assigned automatically if your network supports this capability Othenwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically f Use the following IP address IF address 192 168 1 241l Subnet mask 296 Ms 1 oo Y Default gateway 192 168 1 1 Obtain DAS server address automatically f Use the following ONS server addresses Preferred ONS server 202 96 134 1734 Advanced Alternate DNS server Now Click OK to keep your settings 99 TL WR740N BRUT ICA A OU Appendix C Specifications Standards IEEE 802 3 802 3u 802 11b 802 11g Protocols TCP IP PPPoE DHCP ICMP NAT SNTP Porte One 10 100M Auto Negotiation WAN RJ45 port Four 10 100M Auto Negotiation LAN RJ45 ports supporting Auto MDI MDIX 10BASE T UTP category 3 4 5 cable maximum 100m EIA TIA 568 1000 STP maximum 100m Cabling Type 100BASE TX UTP category 5 5e cable maximum 100m EIA TIA 568 1000 STP maximum 100m Power System WLAN WAN LAN 1 4 QSS Safety amp Emissions FCC CE Frequency Band 2 4 2 4835GHz 11n up to 150Mbps Automatic gt Radio Data Rate 11g 54 48 36 24 18 12 9 6M Automatic 11b 11 5 5 2 1M Automatic WEP WPA WPA2 WPA2 PSK WPA PSK 130M 68dBm 10 PER 108M 68dBm 10
7. f Note After a device is successfully added to the network by QSS function the QSS LED will keep on for about 5 minutes and then turn off TL WR740N Wireless Lite N Router Lite N Router 1 4 2 The Rear Panel TE RESET PONER WAN 4 3 2 l Figure 1 2 Rear Panel sketch The following parts are located on the rear panel View from left to right gt POWER The Power socket is where you will connect the power adapter Please use the power adapter provided with this TL WR740N Wireless Lite N Router 1 2 3 4 LAN These ports 1 2 3 4 connect the Router to the local PC s WAN This WAN port is where you will connect the DSL cable Modem or Ethernet RESET There are two ways to reset to the Router s factory defaults 1 Use the Factory Defaults function on System Tools Factory Defaults page in the Router s Web based Utility 2 Use the Factory Default Reset button With the Router powered on use a pin to press and hold the Reset button about 5 seconds until the SYS LED becomes quick flash from slow flash And then release the button and wait the Router to reboot to its factory default settings Wireless antenna To receive and transmit the wireless data TL WR740N Wireless Lite N Router Lite N Router Chapter 2 Connecting the Router 2 1 System Requirements Broadband Internet Access Service DSL Cable Ethernet One DSL Cable Modem that has an RJ45 connector which is
8. gt Connect Manually You can configure the Router to make it connect or disconnect manually After a specified period of inactivity Max Idle Time the Router will disconnect from your Internet connection and you will not be able to re establish your connection automatically as soon as you attempt to access the Internet again To use this option check the radio button If you want your Internet connection to remain active at all times enter 0 in the Max Idle Time field Otherwise enter the number of minutes that you wish to have the Internet connecting last unless a new link is requested Caution Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background Click the Save button to save your settings 6 If your ISP provides PPTP connection please select PPTP option And you should enter the following parameters Figure 4 13 Eo TL WR740N Wireless Lite N Router Lite N Router WAN WAN Connection Type User Name Password Server IP Address Name IP Address Subnet Mask Gateway DNS Internet IP Address Internet DNS NTU Size in bytes Max Idle Time WAN Connection Mode Connect Disconnected Dynamic IP Static IP 1420 The defaultis 1420 do not change unless necessary 15 minutes 0 means remain active at all times O Connect on Demand Conne
9. Log Level By selecting the log level only logs of this level will be shown gt Refresh Refresh the page to show the latest log list gt Save Log Click to save all the logs in a txt file gt Mail Log Click to send an email of current logs manually according to the address and validation information set in Mail Settings The result will be shown in the later log soon gt Clear Log All the logs will be deleted from the Router permanently not just from the page Click the Next button to go to the next page or click the Previous button return to the previous page 4 16 9 Statistics Choose menu System Tools Statistics you can view the statistics of the Router including total traffic and current traffic of the last Packets Statistic Interval Statistics Current Statistics Status Disabled lo Enable Packets Statistics Interval 5 60 10 Seconds Auto refresh Sorted Rules Sorted by IP Address Reset Al Delete All Total Current Modify IP Address MAC Address 192168 1 101 00 14 66 139 40 FF 192 168 1 111 00 19 66 19 40 7F Per page entries Current No 1 page Packets Bytes Packets Bytes IMP Tx IDF Tx SYN Tx 38 2500 0 0 0 010 aro Reset Modify 4 264 D j 0 0 070 070 Reset Modify Figure 4 81 Statistics gt Current Statistics Status Enable or Disable The default value is disabled To enable click the Enable button gt Packets Statistics Interval 5 60 The d
10. Max Idle Time WAN Connection Mode WSerame Connect Disconnected Dynamic IF Static IF 1460 The defaultis 1460 do not change unless necessary 15 minutes 0 means remain active at all times Connect on Demand Connect Automatically Connect Manually save Figure 4 12 WAN L2TP gt User Name Password Enter the User Name and Password provided by your ISP These fields are case sensitive gt Dynamic IP Static IP Choose either as you are given by your ISP Click the Connect button to connect immediately Click the Disconnect button to disconnect immediately gt Connect on Demand You can configure the Router to disconnect from your Internet connection after a specified period of inactivity Max Idle Time If your Internet connection has been terminated due to inactivity Connect on Demand enables the Router to automatically re establish your connection as soon as you attempt to access the Internet again If you wish to activate Connect on Demand check the radio button If you want your 499 TL WR740N Wireless Lite N Router Lite N Router Internet connection to remain active at all times enter 0 in the Max Idle Time field Otherwise enter the number of minutes you want to have elapsed before your Internet connection terminates gt Connect Automatically Connect automatically after the Router is disconnected To use this option check the radio button
11. e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This device and its antenna must not be co located or operating in conjunction with any other antenna or transmitter To comply with FCC RF exposure compliance requirements this grant is applicable to only Mobile Configurations The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter CE Mark Warning C 1588O This is a class B product In a domestic environment this product may cause radio interference in which case the user
12. 6 Reboot Choose menu System Tools Reboot you can click the Reboot button to reboot the Router via the next screen Reboot Click this button to rebootthe device Figure 4 77 Reboot the Router 85 TL WR740N Wireless Lite N Router Lite N Router Some settings of the Router will take effect only after rebooting which include e Change the LAN IP Address system will reboot automatically e Change the DHCP Settings e Change the Wireless configurations e Change the Web Management Port e Upgrade the firmware of the Router system will reboot automatically e Restore the Router s settings to factory defaults system will reboot automatically e Update the configuration with the file system will reboot automatically 4 16 7 Password Choose menu System Tools Password you can change the factory default user name and password of the Router in the next screen as shown in Figure 4 78 Password Old User Name Old Password New User Name New Password Confirm New Password Figure 4 78 Password It is strongly recommended that you should change the factory default user name and password of the Router because all users who try to access the Router s Web based utility or Quick Setup will be prompted for the Router s default user name and password CSF Note The new user name and password must not exceed 14 characters in length and not include any spaces Enter the new Password twice t
13. Kong Perth Singapore Date 2000 MMIDDIYY NTP Server Prior 000 0 0 0 0 Get GMT Get GMT when connected to Internet nave Figure 4 71 Time settings Time Zone Select your local time zone from this pull down list Date Enter your local date in MM DD YY into the right blanks Time Enter your local time in HH MM SS into the right blanks Vv V V WV NTP Server Prior Enter the address for the NTP Server then the Router will get the time from the NTP Server preferentially In addition for some built in common NTP Servers the Router can get time automatically once it connects the Internet To configure the system manually 1 Select your local time zone 2 Enter date and time in the right blanks 3 Click Save to save the configuration To configure the system automatically 1 Select your local time zone 2 Enter the IP address for NTP Server Prior 3 Click the Get GMT button to get system time from Internet if you have connected to the Internet cS Note 1 This setting will be used for some time based functions such as firewall You must specify 81 TL WR740N Wireless Lite N Router Lite N Router your time zone once you log in to the Router successfully otherwise these functions will not take effect 2 The time will be lost if the Router is turned off 3 The Router will obtain GMT automatically from Internet if it has already connected to Internet 4 16 2 Diagnostic Choose me
14. Router Lite N Router gt Firmware Version This displays the current firmware version gt Hardware Version This displays the current hardware version The hardware version of the upgrade file must accord with the Router s current hardware version To upgrade the Router s firmware follow these instructions below 1 Download a more recent firmware upgrade file from the TP LINK website www tp link com 2 Type the path and file name of the update file into the File field Or click the Browse button to locate the update file 3 Click the Upgrade button ca Note 1 New firmware versions are posted at www tp link com and can be downloaded for free There is no need to upgrade the firmware unless the new firmware has a new feature you want to use However when experiencing problems caused by the Router rather than the configuration you can try to upgrade the firmware 2 When you upgrade the Router s firmware you may lose its current configurations so before upgrading the firmware please write down some of your customized settings to avoid losing important settings 3 Do not turn off the Router or press the Reset button while the firmware is being upgraded otherwise the Router may be damaged 4 The Router will reboot after the upgrading has been finished 4 16 4 Factory Defaults Choose menu System Tools Factory Defaults and you can restore the configurations of the Router to factory defaults on the
15. Wireless Stations numbers 1 MAC Address Current Status Received Packets Sent Packets 00 04 EB 88 34 75 STA ASSOC 416 2 Figure 4 24 Wireless Statistics gt MAC Address The connected wireless station s MAC address gt Current Status The connected wireless station s running status one of STA AUTH STA ASSOC STA JOINED WPA WPA PSK WPA2 WPA2 PSK AP UP AP DOWN Disconnected gt Received Packets Packets received by the station gt Sent Packets Packets sent by the station 45 TL WR740N Wireless Lite N Router Lite N Router You cannot change any of the values on this page To update this page and to show the current connected wireless stations click on the Refresh button If the numbers of connected wireless stations go beyond one page click the Next button to go to the next page and click the Previous button to return the previous page fe Note This page will be refreshed automatically every 5 seconds 4 7 DHCP DHCP Settings Figure 4 25 The DHCP menu There are three submenus under the DHCP menu shown in Figure 4 25 DHCP Settings DHCP Clients List and Address Reservation Click any of them and you will be able to configure the corresponding function 4 7 1 DHCP Settings Choose menu DHCP DHCP Settings you can configure the DHCP Server on the page as shown in Figure 4 26 The Router is set up by default as a DHCP Dynamic Host Configuration Protocol server whi
16. access point in the configuration utility of the QSS as below and click Next OSS for Wireless Join a Wireless Network O55 le preparing to join pour computer to a wireless network Which setup method do you want to use Push the button on my access point Enter a PIN into my access point or a registrar Enter the PIN from my access point Push the button on pour access point and click Mest to continue Automatically select the network The QSS Configuration Screen of Wireless Adapter Step 4 Wait for a while until the next screen appears Click Finish to complete the QSS configuration sI TL WR740N Wireless Lite N Router Lite N Router 055 for Wireless Wireless Configuration Completed four computer has successfully joined the TP LINK network Cancel The QSS Configuration Screen of Wireless Adapter ll By PIN If the new device supports Wi Fi Protected Setup and the PIN method you can add it to the network by PIN with the following two methods Method One Enter the PIN into my Router Step 1 Keep the default QSS Status as Enabled and click the Add device button in Figure 4 3 then the following screen will appear Add A New Device Enter the new device s PIM PIN O Press the button of the new device in two minutes Step 2 Choose Enter the new device s PIN and enter the PIN code of the wireless adapter in the field after PIN a
17. address 00 11 22 33 44 AA in the LAN to access www google com only you should first follow the settings below 1 Click Add New button in Figure 4 51 to enter the Add or Modify an Access Target Entry page 2 In Mode field select Domain Name from the drop down list 3 In Target Description field create a unique description for the target e g Target_1 4 In Domain Name field enter www google com 5 Click Save to complete the settings Then you will go back to the Target Settings page and see the following list ID Target Description Information Modify Target_1 wry google com Edit Delete 4 11 4 Schedule Choose menu Access Control Schedule you can view and set a Schedule list in the next screen as shown in Figure 4 54 The Schedule list is necessary for the Access Control Rule schedule Settings ID Schedule Description ay Time Modify ochedule_1 0000 2400 Edit Delete Add New Delete All Figure 4 54 Schedule Settings gt Schedule Description Here displays the description of the schedule and this description is unique gt Day Here displays the day s in a week 69 TL WR740N Wireless Lite N Router Lite N Router gt Time Here displays the time period in a day gt Modify Here you can edit or delete an existing schedule To add a new schedule follow the steps below 1 Click Add New button shown in Figure 4 54 and the next screen will pop up as sho
18. and Password both in lower case letters Then click the OK button or press the Enter key Connect to 192 168 1 1 TF LIHE Wireless Lite H Router WAT40H Remember my password Figure 3 4 Login Windows SF Note If the above screen does not pop up it means that your Web browser has been set to a proxy Go to Tools menu gt Internet Options gt Connections gt LAN Settings in the screen that appears cancel the Using Proxy checkbox and click OK to finish it 2 After successfully log in you can click the Quick Setup menu to quickly configure your Router 10 TL WR740N Wireless Lite N Router Lite N Router Quick Setup The quick setup will tell you how to configure the basic network parameters To continue please click the Next button To exit please click the Exit button Figure 3 5 Quick Setup 3 Click Next and then WAN Connection Type page will appear shown in Figure 3 6 Quick Setup WAN Connection Type The Quick Setup is preparing to setup your connection type of WAN port The Router will try to detect the Internet connection type your ISF provides if you select the Auto Detect option Otherwise you need to specity the connection type manually Auto Detect Let the Router automatically detect the connection type your ISF provides O PPPoE For this connection your will need your account name and password for your ISP Dynamic IP Your ISF uses a DHCP service to assign your Router an IP address wh
19. box to enable the Internet Access Control function so the Default Filter Policy can take effect Rule Name Here displays the name of the rule and this name is unique Host Here displays the host selected in the corresponding rule Target Here displays the target selected in the corresponding rule Schedule Here displays the schedule selected in the corresponding rule Action Here displays the action the Router takes to deal with the packets It could be Allow or Deny Allow means that the Router permits the packets to go through the Router Deny means that the Router rejects the packets to go through the Router Status This field displays the status of the rule Enabled means the rule will take effect Disabled means the rule will not take effect Modify Here you can edit or delete an existing rule To add a new rule please follow the steps below l 2 Click the Add New button and the next screen will pop up as shown in Figure 4 47 Give a name e g Rule_1 for the rule in the Rule Name field Select a host from the Host drop down list or choose Click Here To Add New Host List Select a target from the Target drop sown list or choose Click Here To Add New Target List 63 TL WR740N Wireless Lite N Router Lite N Router 5 Select a schedule from the Schedule drop down list or choose Click Here To Add New Schedule 6 Inthe Action field select Deny or Allow 7 In the Status f
20. determines the interval of the Delivery Traffic Indication Message DTIM A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages When the Router has buffered broadcast or multicast messages for associated clients it sends the next DTIM with a DTIM Interval value You can specify the value between 1 255 Beacon Intervals The default value is 1 which indicates the DTIM Interval is the same as Beacon Interval gt Enable WMM WMM function can guarantee the packets with high priority messages being transmitted preferentially It is strongly recommended gt Enable Short GI This function is recommended for it will increase the data capacity by reducing the guard interval time gt Enabled AP Isolation This function can isolate wireless stations on your network from each other Wireless devices will be able to communicate with the Router but not with each other To use this function check this box AP Isolation is disabled by default cs Note If you are not familiar with the setting items in this page it s strongly recommended to keep the provided default values otherwise it may result in lower wireless network performance 4 6 5 Wireless Statistics Choose menu Wireless Wireless Statistics you can see the MAC Address Current Status Received Packets and Sent Packets for each connected wireless station Wireless Statistics Current Connected
21. don t need to do anything with the Router If you start as a response you need to configure Virtual Server or DMZ Host and make sure the H323 ALG is enabled How to configure Virtual Server Log in to the Router click the Forwarding menu on the left of your browser and click Virtual Servers submenu On the Virtual Servers page click Add New Then on the Add or Modify a Virtual Server Entry page enter 1720 for the Service Port blank and your IP address for the IP Address blank taking 192 168 1 169 for an example remember to Enable and Save Virtual Servers ID Service Port IP Address Protocol Status Add Mew Figure A 4 Virtual Servers 209 TL WR740N Wireless Lite N Router Lite N Router Add or Modify a Virtual Server Entry 9 service Port 1720 CORA OP AA IP Address 192 169 1 169 Protocol ALL we Status Enabled yt Common Service Port Select One w Figure A 5 Add or Modify a Virtual server Entry fF Note Your opposite side should call your WAN IP which is displayed on the Status page How to enable DMZ Host Log in to the Router click the Forwarding menu on the left of your browser and click DMZ submenu On the DMZ page click Enable radio button and type your IP address into the DMZ Host IP Address field using 192 168 1 169 as an example remember to click the Save button DMZ Current DMZ Status Enable Disable
22. failed BEE Microsoft Windows HP Version 5 1 2600 LC Copyright 1985 26801 Microsoft Corp C Documents and Settings user ping 172 168 1 1 Pinging 192 168 1 1 with 32 bytes of data Destination host unreachable Destination host unreachable Destination host unreachable Destination host unreachable Ping statistics for 192 168 1 1 Packets Sent 4 Received A Lost 4 1808 loss gt Cz Documents and Settings user gt Figure 3 2 Failure result of Ping command Please check the connection following these steps 1 Is the connection between your PC and the Router correct TL WR740N Wireless Lite N Router Lite N Router 2 Is the TCP IP configuration for your PC correct Cf Note If the Router s IP address is 192 168 1 1 your PC s IP address must be within the range of 192 168 1 2 192 168 1 254 3 2 Quick Installation Guide With a Web based utility it is easy to configure and manage the TL WR740N Wireless Lite N Router The Web based utility can be used on any Windows Macintosh or UNIX OS with a Web browser such as Microsoft Internet Explorer Mozilla Firefox or Apple Safari 1 To access the configuration utility open a web browser and type in the default address http 192 168 1 1 in the address field of the browser Address http 192 165 1 1 Figure 3 3 Log in the Router After a moment a login window will appear similar to the Figure 3 4 Enter admin for the User Name
23. may be required to take adequate measures National restrictions This device is intended for home and office use in all EU countries and other countries following the EU directive 1999 5 EC without any limitation except for the countries mentioned below Country Restriction Reason remark General authorization required for outdoor use and Bulgaria None public service Outdoor use limited to 10 Military Radiolocation use Refarming of the 2 4 GHz France mW e i r p within the band band has been ongoing in recent years to allow current 2454 2483 5 MHz relaxed regulation Full implementation planned 2012 If used outside of own premises general authorization is Italy None required General authorization required for network and service Luxembourg None supply not for spectrum This subsection does not apply for the geographical area Norway Implemented within a radius of 20 km from the centre of Ny Alesund Russian Federation None Only for indoor applications Note Please don t use the product outdoors in France TP LINK TP LINK TECHNOLOGIES CO LTD DECLARATI ON OF CONFORMI TY For the following equipment Product Description Wireless Lite N Router Model No TL WR740N Trademark TP LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives Directives 1999 5 EC The above product is in conformity with
24. same name of SSID Service Set Identification must be assigned to all wireless devices in your network Considering your wireless network security the default SSID is set to be TP LINK_xxxxxx xxxxxx indicates the last unique six numbers of each Router s MAC address This value is case sensitive For example TP LINK is NOT the same as tp link gt Region Select your region from the pull down list This field specifies the region where the wireless function of the Router can be used It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field If your country or region is not listed please contact your local government agency for assistance gt Channel This field determines which operating frequency will be used The default channel is set to 6 It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point gt Mode This field determines the wireless mode which the Router works on gt Channel Width Select any channel width from the pull down list The default setting is automatic which can adjust the channel width for your clients automatically gt Max Tx Rate You can limit the maximum transmission rate of the Router through this field Be TL WR740N Wireless Lite N Router Lite N Router gt Disable Security The wireless security function can be enabled or disabled If disabled the
25. second minimum is 30 O means no update We do not recommend using the TRIP encryption ifthe device operates in 202 11n mode due to the fact that TKIP is not supported by Orat 116 specification Figure 4 19 WPA WPA2 40 TL WR740N Wireless Lite N Router Lite N Router e Radius Server IP Enter the IP address of the Radius server e Radius Port Enter the port number of the Radius server e Radius Password Enter the password for the Radius server e Group Key Update Period Specify the group key update interval in seconds The value should be 30 or above Enter 0 to disable the update gt WPA PSK WPA2 PSK It s the WPA WPA2 authentication type based on pre shared passphrase Version you can choose the version of the WPA PSK security on the drop down list The default setting is Automatic which can select WPA PSK Pre shared key of WPA or WPA2 PSK Pre shared key of WPA automatically based on the wireless station s capability and request e Encryption When WPA PSK or WPA is set as the Authentication Type you can select either Automatic or TKIP or AES as Encryption cS Note If you check the WPA PSK WPA2 PSK radio button and choose TKIP encryption you will find a notice in red as shown in Figure 4 20 WPA PSK WPA2 PSK Version Encryption PSK Password Group Key Update Period Automatic hd TKIP ld fou can enter ASC ll characters between 8 and 63 characters or Hexadecima
26. section we ll introduce how to install and configure the TCP IP correctly in Windows XP First make sure your Ethernet Adapter is working refer to the adapter s manual if necessary 1 Configure TCP IP component 1 On the Windows taskbar click the Start button and then click Control Panel 2 Click the Network and Internet Connections icon and then click on the Network Connections tab in the appearing window 3 Right click the icon that showed below select Properties on the prompt page LAN or High Speed Internet ocal Area Connection Connected Firewalled Disable Status Repair Bridge Connections Create Shortcut Delete Rename Properties Figure 0 1 4 Inthe prompt page that showed below double click on the Internet Protocol TCP IP 96 TL WR740N Wireless Lite N Router Lite N Router l Local Area Connection Properties 7x General Authentication Advanced Connect using E Realtek ATLS139 Family PCI Fast Ett This connection uses the following items Install Uninetall Properties Description Transmission Control Protocal nternet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected IW Notify me when this connection has limited or no connectivity Figure 0 2 5 The following TCP IP Properties window will display and the IP Address tab is op
27. the Internet again If you want your Internet connection keeps active all the time please enter 0 in the Max Idle Time field Otherwise enter the number of minutes you want 30 TL WR740N Wireless Lite N Router Lite N Router to have elapsed before your Internet access disconnects gt Connect Automatically The connection can be re established automatically when it was down gt Connect Manually You can click the Connect Disconnect button to connect disconnect immediately This mode also supports the Max Idle Time function as Connect on Demand mode The Internet connection can be disconnected automatically after a specified inactivity period and re established when you attempt to access the Internet again Click the Connect button to connect immediately Click the Disconnect button to disconnect immediately Caution Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background Click the Save button to save your settings 5 If your ISP provides L2TP connection please select L2TP option And you should enter the following parameters Figure 4 12 31 TL WR740N Wireless Lite N Router Lite N Router WAN WAN Connection Type User Hame Password Server IP Address Name IP Address Subnet Mask Gateway DNS Internet IP Address Internet DNS NTU Size in bytes
28. the following standards or other normative documents ETSI EN 300 328 V1 7 1 2006 ETSI EN 301 489 1 V1 8 1 2008 amp ETSI EN 301 489 17 V1 3 2 2008 EN60950 1 2006 EN62311 2008 Directives 2004 108 EC The above product is in conformity with the following standards or other normative documents EN 55022 2006 A1 2007 EN 55024 1998 A1 2001 A2 2003 EN 61000 3 2 2006 EN 61000 3 3 1995 A1 2001 A2 2005 Directives 2006 95 EC The above product is in conformity with the following standards or other normative documents EN60950 1 2006 Person is responsible for marking this declaration Zhao Jianjun Director of International Business TP LINK TECHNOLOGIES CO LTD South Building No 5 Keyuan Road Central Zone Science amp Technology Park Nanshan Shenzhen P R China CONTENTS Package CONOS iaa 1 Chapter Ts CRO CUCU OM cis oa 2 1 1 Overview of the Router ui A A io 2 d2 a aae E A 3 Ro MAIN Feature S dE 3 14 Panel Layos aia AAA AAA A 3 LAS Teo Palas SA 3 Az TMerRsa Panel a 5 Chapter 2 Connecting the Router ccccsssseeeesseseeeeeeseeesseneeeseeseeeeeeeeeeeeenseeseessesseeeneeseneneessonsnenss 6 ZN System RSG UIFSMIS IS so A AA A 6 2 2 Installation Environment Requirement cccccccscecsceceeeecesecceeeceeeeceueeceeesaeeseeeeseeesees 6 23 COMMING MME RONGI e Sa 6 Chapter 3 Quick Installation Guide oooccconnciconiciconociconnnoccnncccnnccnnanononnrononaronnnnrennnnrnnnnrr
29. the number of minutes you want 27 TL WR740N Wireless Lite N Router Lite N Router to have elapsed before your Internet access disconnects gt Connect Automatically The connection can be re established automatically when it was down gt Time based Connecting The connection will only be established in the period from the start time to the end time both are in HH MM format fF Note Only when you have configured the system time on System Tools Time page will the Time based Connecting function can take effect gt Connect Manually You can click the Connect Disconnect button to connect disconnect immediately This mode also supports the Max Idle Time function as Connect on Demand mode The Internet connection can be disconnected automatically after a specified inactivity period and re established when you attempt to access the Internet again Click the Connect button to connect immediately Click the Disconnect button to disconnect immediately Caution Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background If you want to do some advanced configurations please click the Advanced button and the page shown in Figure 4 10 will then appear 28 TL WR740N Wireless Lite N Router Lite N Router PPPoE Advanced Settings NTU Size in bytes 1480 The defaultis 1480 do
30. to save it To modify or delete an existing entry follow the steps below 1 Find the desired entry in the table 2 Click Modify or Delete as desired on the Modify column To find an existing entry follow the steps below 1 Click the Find button as shown in Figure 4 63 2 Enter the MAC Address or IP Address 3 Click the Find button in the page as shown in Figure 4 65 75 TL WR740N Wireless Lite N Router Lite N Router Find IP amp MAC Binding Entry MAC Address 00 14 5E 41 19 E3 ID MAC Address IP Address Bind Link OO 1 4 5E 91 19 E3 192 1686 1 56 To page Figure 4 65 Find IP amp MAC Binding Entry Click the Enable All button to make all entries enabled Click the Delete All button to delete all entries 4 14 2 ARP List To manage the computer you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list and you could configure the items on the ARP list also This page displays the ARP List it shows all the existing IP amp MAC Binding entries as shown in Figure 4 66 ARP List MAC Address IP Address Status Contigure 00 0F E2 80 30 90 172 31 70 1 Unbound Load Delete 00 19 66 80 53 BD 192 162 1 101 Unbound Load Delete Figure 4 66 ARP List gt MAC Address The MAC address of the controlled computer in the LAN gt IP Address The assigned IP address of the controlled computer in the LAN gt Status Indicates whether or not the
31. 128 bit or 152 bit shared key algorithm as described in the IEEE 802 11 standard Wi Fi A trade name for the 802 11b wireless networking standard given by the Wireless Ethernet Compatibility Alliance WECA see http www wi fi net an industry standards group promoting interoperability among 802 11b devices WLAN Wireless Local Area Network A group of computers and associated devices communicate with each other wirelessly which network serving users are limited in a local area 102
32. 13 Build 090625 Rel 31921N WR 40N v1 O0000000 00 25 66 25 43 16 192 168 1 1 2992 al Enable TP LINK_ 254318 E 11ban mixed Automatic 150Mbps 00 25 86 25 43 18 00 25 86 25 43 19 0 0 0 0 Dynamic IP 0 0 0 0 0 0 0 0 Renew 0 0 0 0 0 0 0 0 Received Sent O O 0 O O days 00 16 44 Figure 4 2 Router Status 16 TL WR740N Wireless Lite N Router Lite N Router 4 3 Quick Setup Please refer to Section 3 2 Quick Installation Guide 4 4 QSS This section will guide you to add a new wireless device to an existing network quickly by QSS Quick Secure Setup function a Choose menu QSS you will see the next screen shown in Figure 4 3 QSS Quick Secure Setup OSS Status Enabled Current PIN 17474436 Restore PIN Gen New PIN Add anew device Add device The change of wireless confia will not take effect until the Router reboots please click here to reboot Figure 4 3 QSS gt QSS Status Enable or disable the QSS function here gt Current PIN The current value of the Router s PIN is displayed here The default PIN of the Router can be found in the label or User Guide gt Restore PIN Restore the PIN of the Router to its default gt Gen New PIN Click this button and then you can get a new random value for the Router s PIN You can ensure the network security by generating a new PIN gt Add device You can add a new device to the existing network manually by clicki
33. 192 168 1 100 23959 23959 LDP 23959 192168 1 100 Enabled Figure 4 36 UPnP gt Current UPnP Status UPnP can be enabled or disabled by clicking the Enable or Disable button gt Current UPnP Settings List This table displays the current UPnP information App Description The description provided by the application in the UPnP request External Port The external port the Router opens for the application Protocol The type of protocol the Router opens for the application Internal Port The Internal port the Router opens for local host e IP Address The IP address of the UPnP device that is currently accessing the Router e Status The status of the port is displayed here Enabled means that the port is still active Otherwise the port is inactive Click Refresh to update the Current UPnP Settings List 4 9 Security Basic Security Figure 4 37 The Security menu There are four submenus under the Security menu as shown in Figure 4 37 Basic Security Advanced Security Local Management and Remote Management Click any of them and you will be able to configure the corresponding function 4 9 1 Basic Security Choose menu Security Basic Security you can configure the basic security in the screen 54 TL WR740N Wireless Lite N Router Lite N Router as shown in Figure 4 38 Basic Security Firewall SPI Firewall Enable Disable VPN PPTP Passthrough Enable
34. Finish page as shown in Figure 3 11 Click the Reboot button to make your wireless configuration to take effect and finish the Quick Setup Quick Setup Finish Congratulations The Router is now connecting you to the Internet For detail settings please click other menus if necessary The change of wireless config will nottake effect until the Router reboot Figure 3 11 Quick Setup Finish 14 TL WR740N Wireless Lite N Router Lite N Router Chapter 4 Configuring the Router This chapter will show each Web page s key functions and the configuration way 4 1 Login After your successful login you will see the fifteen main menus on the left of the Web based utility On the right there are the corresponding explanations and instructions 150M Wireless Lite N Router Model No TL WR740N Figure 4 1 the main menu The detailed explanations for each Web page s key function are listed below 4 2 Status The Status page provides the current status information about the Router All information is read only 15 TL WR740N Wireless Lite N Router Lite N Router Status Firmware Version Hardware Version LAN MAC Address IP Address subnet Mask Wireless Wireless Radio Name SSID Channel Mode Channel Width Max Tx Rate MAC Address WAN MAC Address IP Address Subnet Mask Default bateway DNS Server Traffic Statistics Bytes Packets System Up Time 3 8
35. MAC and IP addresses are bound gt Configure Load or delete an item e Load Load the item to the IP amp MAC Binding list e Delete Delete the item 276 2 TL WR740N Wireless Lite N Router Lite N Router Click the Bind All button to bind all the current items available after enable Click the Load All button to load all items to the IP amp MAC Binding list Click the Refresh button to refresh all items cs Note An item could not be loaded to the IP amp MAC Binding list if the IP address of the item has been loaded before Error warning will prompt as well Likewise Load All only loads the items without interference to the IP amp MAC Binding list 4 15 Dynamic DNS Choose menu Dynamic DNS you can configure the Dynamic DNS function The Router offers the DDNS Dynamic Domain Name System feature which allows the hosting of a website FTP server or e mail server with a fixed domain name named by yourself and a dynamic IP address and then your friends can connect to your server by entering your domain name no matter what your IP address is Before using this feature you need to sign up for DDNS service providers such as www comexe cn www dyndns org or www no ip com The Dynamic DNS client service provider will give you a password or key 4 15 1 Comexe cn DDNS If you select www comexe cn the page will appear as shown in Figure 4 68 Bir r ae TL WR740N Wireless Lite N Router Lite N Router
36. NTO ere a E eae ee reteres 59 ACCESS GON TO a a a a ene Gh saweitetaens 62 AR RUE a ee ee ee ee nee ee 62 A A e O O eS re eee eee ee 65 AAAs O 67 ATE SNS CN ic 88 Sac cecaen baa A a bdaanae tee 69 ELA e O OU aes ee ren ee one ee eee 71 BandWidth CONTO leeris a a 72 4 13 1 Control SetinGS 11 22 2 ndeleee ned E electorate eae S 72 AVG 2 RUNES LIS A 73 IPS MAC BIO end omo tiara eee 74 4141 Binding SE UNAS lod 74 AN VAEZ ARS Es 76 Dinamic DON S A eee ee nace A a 77 ATS o CC DDNS cessed A N a 77 AoA NODC DDN Sid as 79 ES cat a necesita aaa ia te uenarond tage les nadie toe nana icons tideantnn nie 80 A TOs TMG S SUING S earliest soenectehdanssict aN 81 AO ZA ONO laicas 82 4 16 3 Firmware UD Ora Ai GA 83 AO Factory erau Sorted a 84 His 10 95 BACKUP Restore isa a idad 85 AMOO RA da 85 AO PASS WO da 86 SES E LOG aie doar eaten a a ntact taausale doe acteeldiateaiatee 86 AY MO PSEA OL ape A IA eae 89 APP AA o Rene ae 91 Appendix B Configuring the PC vc iicviccvsadeves dives socecensbavevetavanetaues secvennswustiverdendsnastessiveesesiiuesverdonearites 96 Appendi GC SpecicatiohSaensirin a ae oct acerca apcaciad ohceceeinatemteiag ace 100 APPenaNeD GS Sal odiaba EE 101 TL WR740N Wireless Lite N Router Lite N Router Package Contents The following items should be found in your package TL WR740N Wireless Lite N Router DC Power Adapter for TL WR740N Wireless Lite N Router Quick Installation Guide Vv
37. PER 54M 68dBm 10 PER Sensitivity PER 11M 85dBm 8 amp PER 6M 88dBm 10 PER 1M 90dBm 8 PER RF Power 20dBm max Environmental and Physical Operating OC 40 C 32 F 104F Storage 40 C 70 C 40 F 158 F Operating 10 90 RH Non condensing Temperature Humidity Storage 5 90 RH Non condensing 100 TL WR740N Wireless Lite N Router Lite N Router Appendix D Glossary gt 802 11b The 802 11b standard specifies a wireless networking at 11 Mbps using direct sequence spread spectrum DSSS technology and operating in the unlicensed radio spectrum at 2 4GHz and WEP encryption for security 802 11b networks are also referred to as Wi Fi networks gt 802 11g specification for wireless networking at 54 Mbps using direct sequence spread spectrum DSSS technology using OFDM modulation and operating in the unlicensed radio spectrum at 2 4GHz and backward compatibility with IEEE 802 11b devices and WEP encryption for security gt DDNS Dynamic Domain Name System The capability of assigning a fixed host and domain name to a dynamic Internet IP Address gt DHCP Dynamic Host Configuration Protocol A protocol that automatically configure the TCP IP parameters for the all the PC s that are connected to a DHCP server gt DMZ Demilitarized Zone A Demilitarized Zone allows one local host to be exposed to the Internet for a special purpose service such as Interne
38. Reservation Choose menu DHCP Address Reservation you can view and add a reserved address for clients via the next screen shown in Figure 4 28 When you specify a reserved IP address for a PC on the LAN that PC will always receive the same IP address each time when it accesses the DHCP server Reserved IP addresses should be assigned to the servers that require permanent IP settings Address Reservation ID MAC Address Reserved IP Address Status Modify 1 00 04 EB 00 23 11 192 168 1 100 Enabled Modify Delete Add New Enable All Disable All Delete All Figure 4 28 Address Reservation gt MAC Address The MAC address of the PC for which you want to reserve an IP address gt Reserved IP Address The IP address reserved for the PC by the Router gt Status The status of this entry either Enabled or Disabled To Reserve an IP address 1 Click the Add New button Then Figure 4 29 will pop up 2 Enter the MAC address in XX XX XX XX XX XX format and IP address in dotted decimal notation of the computer for which you want to reserve an IP address 3 Click the Save button Add or Modify an Address Reservation Entry Reserved IP Address fs Status Enabled v Figure 4 29 Add or Modify an Address Reservation Entry 48 TL WR740N Wireless Lite N Router Lite N Router To modify or delete an existing entry 1 Click the Modify in the entry you want to modify If you want to delete the e
39. SCII characters between 6 and 63 characters or 64 Hexadecimal characters Group Key Update Period fin second minimum is 30 0 means no update The change of wireless config will nat take effect until the Router reboots please click here to reboot Save Figure 4 17 Wireless Security gt Disable Security If you do not want to use wireless security check this radio button But it s strongly recommended to choose one of the following modes to enable security gt WEP Itis based on the IEEE 802 11 standard If you check this radio button you will find a notice in red as show in Figure 4 18 Key Selected WEP Key Key Type We do not recommend using the WEP encryption ifthe device operates in 802 11n mode due to the fact that WEF is not supported by Draft 11H specification Figure 4 18 WEP 39 TL WR740N Wireless Lite N Router Lite N Router e Type you can choose the type for the WEP security on the pull down list The default setting is Automatic which can select Shared Key or Open System authentication type automatically based on the wireless station s capability and request e WEP Key Format Hexadecimal and ASCII formats are provided here Hexadecimal format stands for any combination of hexadecimal digits 0 9 a f A F in the specified length ASCII format stands for any combination of keyboard characters in the specified length e WEP Key Select which of the four keys will be used and enter
40. TP LINK User Guide TL WR740N Wireless Lite N Router Rev 1 0 0 1910010197 COPYRIGHT amp TRADEMARKS Specifications are subject to change without notice TP LINK is a registered trademark of TP LINK TECHNOLOGIES CO LTD Other brands and product names are trademarks or registered trademarks of their respective holders No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from TP LINK TECHNOLOGIES CO LTD Copyright 2009 TP LINK TECHNOLOGIES CO LTD All rights reserved http www tp link com FCC STATEMENT HE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures
41. Y VY WV Resource CD for TL WR740N Wireless Lite N Router including e This Guide e Other Helpful Information cs Note Make sure that the package contains the above items If any of the listed items are damaged or missing please contact with your distributor TL WR740N Wireless Lite N Router Lite N Router Chapter 1 Introduction Thank you for choosing the TL WR740N Wireless Lite N Router 1 1 Overview of the Router The TL WR740N Wireless Lite N Router integrates 4 port Switch Firewall NAT Router and Wireless AP Powered by 2x2 MIMO technology the Wireless Lite N Router delivers exceptional range and speed which can fully meet the need of Small Office Home Office SOHO networks and the users demanding higher networking performance Incredible Speed The TL WR740N Wireless Lite N Router provides up to 150Mbps wireless connection with other 802 11n wireless clients The speed makes it ideal for handling multiple data streams at the same time which ensures your network stable and smooth It is compatible with all IEEE 802 11g and IEEE 802 11b products Multiple Security Protections With multiple protection measures including SSID broadcast control and wireless LAN 64 128 152 bit WEP encryption WiFi protected Access WPA2 PSK WPA PSK as well as advanced Firewall protections the TL WR740N Wireless Lite N Router provides complete data privacy Flexible Access Control The TL WR740N Wireless Lite N R
42. anagement Port Remote Management IP Address 0000 Enter 255 255 255 255 for alli Figure 4 41 Remote Management gt Web Management Port Web browser access normally uses the standard HTTP service port 80 This Router s default remote management web port number is 80 For greater security you can change the remote management web port to a custom port by entering that number in the box provided Choose a number between 1 and 65534 but do not use the number of any common service port gt Remote Management IP Address This is the current address you will use when accessing your Router from the Internet This function is disabled when the IP address is set to the default value of 0 0 0 0 To enable this function change 0 0 0 0 to a valid IP address If set to 255 255 255 255 then all the hosts can access the Router from internet Cf Note 1 To access the Router you should type your Router s WAN IP address into your browser s address in IE or Location in Navigator box followed by a colon and the custom port number For example if your Router s WAN address is 202 96 12 8 and the port number used is 8080 please enter http 202 96 12 8 8080 in your browser Later you may be asked for the Router s password After successfully entering the username and password you will be able to access the Router s web based utility 2 Be sure to change the Router s default password to a very secure password 4 10 Parental Control Choos
43. ch provides the TCP IP configuration for all the PC s that are connected to the Router on the LAN DHCP Settings DHCP Server O Disable Enable Start IP Address 192 168 1 100 End IP Address 192 168 1 199 Address Lease Time 120 minutes 1 2880 minutes the default value is 120 Default Gateway 192 168 1 1 optional Default Domain optional Primary DNS 0 0 0 0 optional Secondary ONS 00 0 0 optional Save Figure 4 26 DHCP Settings gt DHCP Server Enable or Disable the DHCP server If you disable the Server you must 46 TL WR740N Wireless Lite N Router Lite N Router have another DHCP server within your network or else you must configure the computer manually gt Start IP Address Specify an IP address for the DHCP Server to start with when assigning IP addresses 192 168 1 100 is the default start address gt End IP Address Specify an IP address for the DHCP Server to end with when assigning IP addresses 192 168 1 199 is the default end address gt Address Lease Time The Address Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP Address Enter the amount of time in minutes and the user will be leased this dynamic IP Address After the time is up the user will be automatically assigned a new dynamic IP address The range of the time is 1 2880 minutes The default value is 120 minutes gt Default Gatewa
44. ct Automatically Connect Manually Dave Figure 4 13 PPTP Settings gt User Name Password Enter the User Name and Password provided by your ISP These fields are case sensitive gt Dynamic IP Static IP Choose either as you are given by your ISP and enter the ISP s IP address or the domain name If you choose static IP and enter the domain name you should also enter the DNS assigned by your ISP And click the Save button Click the Connect button to connect immediately Click the Disconnect button to disconnect immediately gt Connect on Demand You can configure the Router to disconnect from your Internet lt BA TL WR740N Wireless Lite N Router Lite N Router connection after a specified period of inactivity Max Idle Time If your Internet connection has been terminated due to inactivity Connect on Demand enables the Router to automatically re establish your connection as soon as you attempt to access the Internet again If you wish to activate Connect on Demand check the radio button If you want your Internet connection to remain active at all times enter O in the Max Idle Time field Otherwise enter the number of minutes you want to have elapsed before your Internet connection terminates gt Connect Automatically Connect automatically after the Router is disconnected To use this option check the radio button gt Connect Manually You can configure the Router to make it con
45. dress assignment The Router can not detect PPTP L2TP BigPond connections with your ISP If your ISP uses one of these protocols then you must configure your connection manually 4 5 3 MAC Clone Choose menu Network MAC Clone you can configure the MAC address of the WAN on the screen below Figure 4 14 35 TL WR740N Wireless Lite N Router Lite N Router MAC Clone WAN MAC Address 100 25 86 25 43 19 Restore Factory MAC Your PCs MAC Address Clone MAC Address Figure 4 14 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter Changes are rarely needed here gt WAN MAC Address This field displays the current MAC address of the WAN port If your ISP requires you to register the MAC address please enter the correct MAC address into this field in XX XX XX XX XX XX format X is any hexadecimal digit gt Your PC s MAC Address This field displays the MAC address of the PC that is managing the Router lf the MAC address is required you can click the Clone MAC Address To button and this MAC address will fill in the WAN MAC Address field Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value Click the Save button to save your settings cs Note Only the PC on your LAN can use the MAC Address Clone function 4 6 Wireless Figure 4 15 Wireless menu There are five submenus under the Wireless menu shown in Figur
46. e gt Modify Here you can edit or delete an existing entry To add a new entry please follow the steps below 1 Click the Add New button and the next screen will pop up as shown in Figure 4 43 2 Enter the MAC address of the PC e g 00 11 22 33 44 AA you d like to control in the MAC Address of Child PC field Or you can choose the MAC address from the All Address in Current LAN drop down list 3 Give a description e g Allow Google for the website allowed to be accessed in the Website Description field 4 Enter the domain name of the website e g www google com in the Allowed Domain Name field 5 Select from the Effective Time drop down list the schedule e g Schedule_1 you want the entry to take effect If there are not suitable schedules for you click the Schedule in red below to go to the Advance Schedule Settings page and create the schedule you need 60 TL WR740N Wireless Lite N Router Lite N Router 6 Inthe Status field you can select Enabled or Disabled to enable or disable your entry 7 Click the Save button Click the Enable All button to enable all the rules in the list Click the Disable All button to disable all the rules in the list Click the Delete All button to delete all the entries in the table Click the Next button to go to the next page or click the Previous button return to the previous page Add or Modify Parental Control Entry The Schedule is based on the time of
47. e 4 15 Wireless Settings Wireless Security Wireless MAC Filtering Wireless Advanced and Wireless Statistics Click any of them and you will be able to configure the corresponding function 4 6 1 Wireless Settings Choose menu Wireless Wireless Settings you can configure the basic settings for the wireless network on this page e Wireless Settings SSID Region Channel Mode Channel Width Max Tx Rate TL WR740N BYU CM UT TP LINK 254315 ho oo Enable Wireless Router Radio Enable SSID Broadcast Enable WDS Bridge Save Figure 4 16 Wireless Settings gt SSID Enter a value of up to 32 characters The same name of SSID Service Set Identification must be assigned to all wireless devices in your network Considering your wireless network security the default SSID is set to be TP LINK_xxxxxx xxxxxx indicates the last unique six numbers of each Router s MAC address This value is case sensitive For example TP LINK is NOT the same as tp link Region Select your region from the pull down list This field specifies the region where the wireless function of the Router can be used It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field If your country or region is not listed please contact your local government agency for assistance When you select your local region from the pull down list click the Sav
48. e button then the Note Dialog appears Click OK Bicrosoftt Internet Explorer Note Dialog lt 37 TL WR740N Wireless Lite N Router Lite N Router Cf Note Limited by local law regulations version for North America does not have region selection option gt Channel This field determines which operating frequency will be used The default channel is set to 6 It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point gt Mode Select the desired mode The default setting is 11bgn mixed 11b only Select if all of your wireless clients are 802 11b 11g only Select if all of your wireless clients are 802 11g 11n only Select only if all of your wireless clients are 802 11n 11bg mixed Select if you are using both 802 11b and 802 11g wireless clients 11bgn mixed Select if you are using a mix of 802 11b 11g and 11n wireless clients Select the desired wireless mode When 802 11g mode is selected only 802 11g wireless stations can connect to the Router When 802 11n mode is selected only 802 11n wireless stations can connect to the AP It is strongly recommended that you set the Mode to 802 11b amp g amp n and all of 802 11b 802 11g and 802 11n wireless stations can connect to the Router gt Channel width Select the channel width from the pull down list The default setting is automatic which can adjust the channel width for your c
49. e menu Parental Control you can configure the parental control in the screen as shown in Figure 4 42 The Parental Control function can be used to control the internet activities of the child limit the child to access certain websites and restrict the time of surfing 59 TL WR740N Wireless Lite N Router Lite N Router Parental Control Settings Mon Parental PCs not listed will not be able to access the Internet Parental Control Disable O Enable MAC Address of Parental PC MAC Address of Your PC 00 19 66 19 40 7F ID MAC address Website Description Schedule Status Modify 1 00 11 22 33 44 A5A Allow Google Schedule 1 Enabled Edit Delete Figure 4 42 Parental Control Settings gt Parental Control Check Enable if you want this function to take effect otherwise check Disable gt MAC Address of Parental PC In this field enter the MAC address of the controlling PC or you can make use of the Copy To Above button below gt MAC Address of Your PC This field displays the MAC address of the PC that is managing this Router If the MAC Address of your adapter is registered you can click the Copy To Above button to fill this address to the MAC Address of Parental PC field above Website Description Description of the allowed website for the PC controlled Schedule The time period allowed for the PC controlled to access the Internet For detailed information please go to Access Control Schedul
50. efault value is 10 Select a value between 5 and 89 TL WR740N BRUTA A UT 60 seconds in the pull down list The Packets Statistic interval indicates the time section of the packets statistic Select the Auto refresh checkbox to refresh automatically Click the Refresh button to refresh immediately gt Sorted Rules Select a rule from the pull down list to display the corresponding statistics Click Reset All to reset the values of all the entries to zero Click Delete All to delete all entries in the table Statistics Table IP MAC Address The IP MAC Address displayed with statistics The total amount of packets received and transmitted by the Total Router The total amount of bytes received and transmitted by the Router The total amount of packets received and transmitted in the last pac Packets Statistic interval seconds The total amount of bytes received and transmitted in the last Packets Statistic interval seconds The total amount of the ICMP packets transmitted to WAN in the Current ICMP Tx last Packets Statistic interval seconds The total amount of the UDP packets transmitted to WAN in the last iS Packets Statistic interval seconds TCP The total amount of the TCP SYN packets transmitted to WAN in SYN Tx the last Packets Statistic interval seconds There would be 5 entries on each page Click Previous to return to the previous page and Next to the next page 90 TL WR740N Wireless Li
51. en connecting to the Internet O Static IP This type of connetction uses a permanent fixed static IP address that your ISF assigned Figure 3 6 WAN Connection Type The Router provides Auto Detect function and supports three popular ways PPPoE Dynamic IP and Static IP to connect to the Internet It s recommended that you make use of the Auto Detect function If you are sure of what kind of connection type your ISP provides you can select the very type and click Next to go on configuring 4 If you select Auto Detect the Router will automatically detect the connection type your ISP provides Make sure the cable is securely plugged into the WAN port before detection The appropriate configuration page will be displayed when an active Internet service is successfully detected by the Router 1 If the connection type detected is PPPoE the next screen will appear as shown in Figure 3 7 Quick Setup PPPoE User Name Username Password Figure 3 7 Quick Setup PPPoE 11 TL WR740N Wireless Lite N Router Lite N Router gt User Name Password Enter the User Name and Password provided by your ISP These fields are case sensitive lf you have difficulty with this process please contact your ISP 2 If the connection type detected is Dynamic IP the next screen will appear as shown in Figure 3 9 Then you can go on with the wireless configuration 3 If the connection type detected is Static IP the nex
52. en on this wndow by default Now you have two ways to configure the TCP IP protocol below gt Setting IP address automatically Select Obtain an IP address automatically Choose Obtain DNS server automatically as shown in the Figure below 97 TL WR740N Wireless Lite N Router Lite N Router gt Internet Protocol TCP IP Properties 7 x General Alternate Configuration You can getlP settings assigned automatically if your network supports this capability Othermise you need to ask your network administrator for the appropriate IP settings Obtain an IF address automatically Use the following IP address IP address Subnet mask Default gateway Use the following ONS server addresses Prefered DHS server Alternate DAS server Figure 0 3 cs Note For Windows 98 OS or before the PC and Router may need to be restarted Setting IP address manually Select Use the following IP address radio button And the following items available If the Router s LAN IP address is 192 168 1 1 specify the IP address as 192 168 1 x x is from 2 to 254 and the Subnet mask as 255 255 255 0 Type the Router s LAN IP address the default IP is 192 168 1 1 into the Default gateway field Select Use the following DNS server addresses In the Preferred DNS Server field you can enter the same value as the Default gateway or type the local DNS server IP address 98 TL WR740N
53. eply of each Ping packet If there is no reply in the specified time the connection is overtime gt Traceroute Max TTL The max number of hops for a Traceroute connection Click Start to check the connectivity of the Internet The Diagnostic Results page displays the result of diagnosis If the result is similar to the following screen the connectivity of the Internet is fine Diagnostic Results Pinging 202 108 225 with 64 bytes of data Reply from 202 108 225 bytes 64 time 1 TTL 12 sedq 1 Reply from 202 108 22 5 bytes 64 time 1 TTL 127 seq 2 Reply from 202 108 22 5 bytes 64 time 1 TTL 12 seq 3 Reply from 202 108 22 5 bytes 64 time 1 TTL gt 127 seq 4 Ping statistics for 202 108 22 5 Packets Sent 4 Received 4 Lost 0 0 loss Approximate round trip times in milliseconds Minimum 1 Maximum 1 Average 1 Figure 4 73 Diagnostic Results cs Note 7J bG Only one user can use this tool at one time Options Number of Pings Ping Size and Ping Timeout are used for Ping function Option Tracert Hops are used for Tracert function 4 16 3 Firmware Upgrade Choose menu System Tools Firmware Upgrade you can update the latest version of firmware for the Router on the following screen Firmware Upgrade Firmware Version 3 8 10 Build 090611 Rel 39157n Hardware Version WR 740 v1 DODODODO Figure 4 74 Firmware Upgrade 93 TL WR740N Wireless Lite N
54. ete 2 Modify the information 3 Click the Save button 50 TL WR740N Wireless Lite N Router Lite N Router Click the Enable Disabled All button to make all entries enabled disabled Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return the previous page cf Note If you set the service port of the virtual server as 80 you must set the Web management port on Security Remote Management page to be any other value except 80 such as 8080 Otherwise there will be a conflict to disable the virtual server 4 8 2 Port Triggering Choose menu Forwarding Port Triggering you can view and add port triggering in the screen as shown in Figure 4 33 Some applications require multiple connections like Internet games video conferencing Internet calling and so on These applications cannot work with a pure NAT Router Port Triggering is used for some of these applications that can work with an NAT Router Port Triggering ID Trigger Port Trigger Protocol Incoming Pot Incoming Protocol Status Modify 1 554 ALL 6970 6994 ALL Enabled Modify Delete Add New Enable All Disable All Delete All Figure 4 33 Port Triggering Once the Router is configured the operation is as follows 1 A local host makes an outgoing connection using a destination port number defined in the Trigger Port field 2 The Router records this connect
55. following screen Factory Defaults Click the following button to reset all configuration settings to their default values Figure 4 75 Restore Factory Default Click the Restore button to reset all configuration settings to their default values e The default User Name admin e The default Password admin e The default IP Address 192 168 1 1 84 TL WR740N Wireless Lite N Router Lite N Router e The default Subnet Mask 255 255 255 0 cs Note Any settings you have saved will be lost when the default settings are restored 4 16 5 Backup amp Restore Choose menu System Tools Backup amp Restore you can save the current configuration of the Router as a backup file and restore the configuration via a backup file as shown in Figure 4 76 Backup amp Restore Backup Figure 4 76 Backup amp Restore Configuration gt Click the Backup button to save all configuration settings as a backup file in your local computer gt To upgrade the Router s configuration follow these instructions e Click the Browse button to locate the update file for the Router or enter the exact path to the Setting file in the text box e Click the Restore button Cf Note The current configuration will be covered by the uploading configuration file The upgrade process lasts for 20 seconds and the Router will restart automatically Keep the Router on during the upgrading process to prevent any damage 4 16
56. ield select Enabled or Disabled to enable or disable your entry 8 Click the Save button Click the Enable All button to enable all the rules in the list Click the Disable All button to disable all the rules in the list Click the Delete All button to delete all the entries in the table You can change the entry s order as desired Fore entries are before hind entries Enter the ID number in the first box you want to move and another ID number in second box you want to move to and then click the Move button to change the entry s order Click the Next button to go to the next page or click the Previous button to return to the previous page Add or Modify Internet Access Control Entry Rule Name Host Click Here To Add Mew Host List Target Any Target Click Here To Add Mew Target List Schedule Anytime Click Here To Add Mew schedule Action Deny w Status Enabled Figure 4 47 Add or Modify Internet Access Control Entry For example If you desire to allow the host with MAC address 00 11 22 33 44 AA to access www google com only from 18 00 to 20 00 on Saturday and Sunday and forbid other hosts in the LAN to access the Internet you should follow the settings below 1 Click Access Control Host in the left to enter the Host Settings page Add a new entry with the Host Description is Host_1 and MAC Address is 00 11 22 33 44 AA 2 Click Access Control Target in the left to enter the Target Setti
57. ify 1 Host IP 192 168 1 2 192 168 1 23 Edit Delete Add New Delete All Page 1 w Figure 4 48 Host Settings gt Host Description Here displays the description of the host and this description is unique gt Information Here displays the information about the host It can be IP or MAC gt Modify To modify or delete an existing entry 65 TL WR740N Wireless Lite N Router Lite N Router To add a new entry please follow the steps below 1 Click the Add New button 2 Inthe Mode field select IP Address or MAC Address e If you select IP Address the screen shown is Figure 4 49 Add or Modify a Host Entry Mode IPF Address e LAN IP Address 192 168 1 1 1192 168 1 23 Figure 4 49 Add or Modify a Host Entry 1 In Host Description field create a unique description for the host e g Host_1 2 In LAN IP Address field enter the IP address e If you select MAC Address the screen shown is Figure 4 50 Add or Modify a Host Entry Mode MAC Address Host Description Host_1 MAC Address 00 11 22 33 44 4 4 Figure 4 50 Add or Modify a Host Entry 1 In Host Description field create a unique description for the host e g Host_1 2 In MAC Address field enter the MAC address 3 Click the Save button to complete the settings Click the Delete All button to delete all the entries in the table Click the Next button to go to the next page or click the Previous button return to
58. ion opens the incoming port or ports associated with this entry in the Port Triggering table and associates them with the local host 3 When necessary the external host will be able to connect to the local host using one of the ports defined in the Incoming Ports field gt Trigger Port The port for outgoing traffic An outgoing connection using this port will trigger this rule gt Trigger Protocol The protocol used for Trigger Ports either TCP UDP or All all protocols supported by the Router gt Incoming Ports Range The port or port range used by the remote system when it 51 TL WR740N Wireless Lite N Router Lite N Router responds to the outgoing request A response using one of these ports will be forwarded to the PC that triggered this rule You can input at most 5 groups of ports or port sections Every group of ports must be set apart with For example 2000 2038 2050 2051 2085 3010 3030 gt Incoming Protocol The protocol used for Incoming Ports Range either TCP or UDP or ALL all protocols supported by the Router gt Status The status of this entry either Enabled or Disabled To add a new rule follow the steps below 1 Click the Add New button the next screen will pop up as shown in Figure 4 34 2 Select a common application from the Common Applications drop down list then the Trigger Port field and the Incoming Ports field will be automatically filled If the Commo
59. l characters 64 characters o l n second minimum is 30 0 means no update We do notrecommend using the TKIP encrption ifthe device operates in 802 1171 mode due to the fact that TKIP is not supported by Draft 110 specification Figure 4 20 WPA PSK WPA2 PSK e PSK Passphrase You can enter a Passphrase between 8 and 63 characters e Group Key Update Period Specify the group key update interval in seconds The value should be 30 or above Enter 0 to disable the update Be sure to click the Save button to save your settings on this page 4 6 3 Wireless MAC Filtering Choose menu Wireless MAC Filtering you can control the wireless access by configuring the Wireless MAC Filtering function shown in Figure 4 21 saje TL WR740N Wireless Lite N Router Lite N Router Wireless MAC Filtering Wireless MAC Filtering Disabled Filtering Rules Allow the stations not specified by any enabled entries in the listto access Deny the stations not specified by any enabled entries in the listto access ID MAC Address Status Description Modify 1 00 0A EB B0 00 0B Enabled Wireless Station A Modify Delete Add New Enable All Disable All Delete All Figure 4 21 Wireless MAC Filtering To filter wireless users by MAC Address click Enable The default setting is Disable gt MAC Address The wireless station s MAC address that you want to filter gt Status The status of this entry either Enabled or Disab
60. lable enter it as well Click the Save button to save your settings 4 If your ISP provides BigPond Cable or Heart Beat Signal connection please select BigPond Cable And you should enter the following parameters Figure 4 11 DOS TL WR740N Wireless Lite N Router Lite N Router WAN WAN Connection Type BigPond Cable MTU Size in bytes 1500 The defaultis 1500 do not change unless necessary Connect on Demand Wax Idle Time minutes 0 means remain active at all times O Connect Automatically O Connect Manually Wax Idle Time 15 minutes 0 means remain active at all times Connect Disconnected Figure 4 11 WAN BigPond Cable gt User Name Password Enter the User Name and Password provided by your ISP These fields are case sensitive gt Auth Server Enter the authenticating server IP address or host name gt Auth Domain Type in the domain suffix server name based on your location e g NSW ACT nsw bigpond net au VIC TAS WA SA NT vic bigpond net au QLD qld bigpond net au gt MTU Size The normal MTU Maximum Transmission Unit value for most Ethernet networks is 1500 Bytes It is not recommended that you change the default MTU Size unless required by your ISP gt Connect on Demand In this mode the Internet connection can be terminated automatically after a specified inactivity period Max Idle Time and be re established when you attempt to access
61. led gt Description A simple description of the wireless station To Add a Wireless MAC Address filtering entry click the Add New button The Add or Modify Wireless MAC Address Filtering entry page will appear shown in Figure 4 22 Add or Modify Wireless MAC Address Filtering entry Status Enabled w Figure 4 22 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry follow these instructions 1 Enter the appropriate MAC Address into the MAC Address field The format of the MAC Address iS XX XX XX XX XX XX X is any hexadecimal digit For example 00 0A EB B0 00 0B Ud TL WR740N Wireless Lite N Router Lite N Router 2 Give a simple description for the wireless station in the Description field For example Wireless station A 3 Select Enabled or Disabled for this entry on the Status pull down list 4 Click the Save button to save this entry To modify or delete an existing entry 1 Click the Modify in the entry you want to modify If you want to delete the entry click the Delete 2 Modify the information 3 Click the Save button Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled Click the Delete All button to delete all entries Click the Next button to go to the next page Click the Previous button to return to the previous page For example If you desire that the wireless station A
62. les List you can view and configure the Bandwidth Control rules in the screen below Bandwidth Control Rules List Egress Bandwidintkbps Ingress BandwidintKbpsi ID Description Enable ho ity hin blax biin blax 1 192 168 1 2 192 168 1 23 21 0 Modify Delete Add Mew Delete 411 Mow is the page Figure 4 60 Bandwidth Control Rules List gt Description This is the information about the rules such as address range gt Egress bandwidth This field displays the max and mix upload bandwidth through the WAN port the default is 0 gt Ingress bandwidth This field displays the max and mix download bandwidth through the WAN port the default is O gt Enable This displays the status of the rule gt Modify Click Modify to edit the rule Click Delete to delete the rule To add modify a Bandwidth Control rule follow the steps below Step 1 Click Add New shown in Figure 4 60 you will see a new screen shown in Figure 4 61 78 TL WR740N Wireless Lite N Router Lite N Router Step 2 Enter the information like the screen shown below Bandwidth Control Rule Settings Enable Pont Range EMM 7 Protocol Min Bandwidthikbps Wax Bandwidth Kbps Egress Bandwidth Ingress Bandwidth Figure 4 61 Bandwidth Control Rule Settings Step 3 Click the Save button 4 14IP amp MAC Bing Setting Binding Settings Figure 4 62 the IP amp MAC Binding menu There are two submenus unde
63. lients automatically cf Note If 11b only 11g only or 11bg mixed is selected in the Mode field the Channel Width selecting field will turn grey and the value will become 20M which is unable to be changed gt Max Tx Rate You can limit the maximum tx rate of the Router through this field gt Enable Wireless Router Radio The wireless radio of this Router can be enabled or disabled to allow wireless stations access gt Enable SSID Broadcast When wireless clients survey the local area for wireless networks to associate with they will detect the SSID broadcast by the Router If you select the Enable SSID Broadcast checkbox the Wireless Router will broadcast its name SSID on the air 4 6 2 Wireless Security Choose menu Wireless Wireless Security you can configure the security settings of your wireless network There are five wireless security modes supported by the Router WEP Wired Equivalent Privacy WPA Wi Fi Protected Access WPA2 Wi Fi Protected Access 2 WPA PSK Pre Shared Key WPA2 PSK Pre Shared Key 38 TL WR740N Wireless Lite N Router Lite N Router Key Selected WEP Key Key Type WPAWPA2 Encryption TKIP w Radius Server IP Radius Port 1012 1 65535 0 stands for default port 1812 Radius Password Group Key Update Period fin second minimum is 30 O means no update O WPA PSK WPA2 PSK Version Automatic Encryption Autornatic PSK Password ou can enter A
64. ly 1 Setup the TCP IP Protocol in Obtain an IP address automatically mode on your PC If you need instructions as to how to do this please refer to Appendix B Configuring the PC 2 Then the built in DHCP server will assign IP address for the PC Now you can run the Ping command in the command prompt to verify the network connection between your PC and the Router The following example is in Windows 2000 OS Open a command prompt and type ping 192 168 1 1 and then press Enter gt Ifthe result displayed is similar to the Figure 3 1 it means the connection between your PC and the Router has been established well TL WR740N Wireless Lite N Router Lite N Router Microsoft Windows AF Wersion 5 1 2600 LC Copyright 1985 2001 Microsoft Corp C Documents and Settings suser gt ping 192 168 1 1 Pinging 192 168 1 1 with 32 bytes of data Reply from 192 168 1 1 bytes 32 time lt ims TTL 64 Reply from 192 168 1 1 bytes 32 timetims TTL 64 Reply from 192 168 1 1 bytes 32 timetims TTL 64 Reply from 192 168 1 1 bytes 32 time lt ims TTL 64 Ping statistics for 192 168 1 1 Packets Sent 4 Received 4 Lost B CH loss gt Approximate round trip times in milli seconds Mininum Bms Maximum Ams Average Ams C Documents and Settings user gt Figure 3 1 Success result of Ping command gt Ifthe result displayed is similar to the Figure 3 2 it means the connection between your PC and the Router is
65. n Applications do not have the application you need enter the Trigger Port and the Incoming Ports manually 3 Select the protocol used for Trigger Port from the Trigger Protocol drop down list either TCP UDP or All 4 Select the protocol used for Incoming Ports from the Incoming Protocol drop down list either TCP or UDP or All 5 Select Enable in Status field 6 Click the Save button to save the new rule Add or Modify a Port Triggering Entry Trigger Port Trigger Protocol Incoming Ports Incoming Protocol ALL ow Status Enabled Common Applications Select Ore wt Figure 4 34 Add or Modify a Port Triggering Entry To modify or delete an existing entry 1 Click the Modify in the entry you want to modify If you want to delete the entry click the Delete 2 Modify the information 3 Click the Save button le TL WR740N Wireless Lite N Router Lite N Router Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled Click the Delete All button to delete all entries cS Note When the trigger connection is released the corresponding opening ports will be closed 2 Each rule is allowed to be used only by one host on LAN synchronously The trigger connection of other hosts on LAN will be refused 3 Incoming Port Range cannot overlap each other 4 8 3 DMZ Choose menu Forwarding DMZ you can view and configure DMZ host i
66. n Figure 2 1 6 Connect the power adapter to the power socket on the Router and the other end into an TL WR740N Wireless Lite N Router Lite N Router electrical outlet The Router will start to work automatically 7 Power on your PC and Cable DSL Modem xDSL Cable Ethernet VY a J Gm I I i I a Figure 2 1 Hardware Installation of the TL WR740N Wireless Lite N Router TL WR740N Wireless Lite N Router Lite N Router Chapter 3 Quick Installation Guide This chapter will show you how to configure the basic functions of your TL WR740N Wireless Lite N Router using Quick Setup Wizard within minutes 3 1 TCP IP Configuration The default IP address of the TL WR740N Wireless Lite N Router is 192 168 1 1 And the default Subnet Mask is 255 255 255 0 These values can be changed as you desire In this guide we use all the default values for description Connect the local PC to the LAN ports of the Router And then you can configure the IP address for your PC in the following two ways gt Configure the IP address manually 1 Set up the TCP IP Protocol for your PC If you need instructions as to how to do this please refer to Appendix B Configuring the PC 2 Configure the network parameters The IP address is 192 168 1 xxx xxx is any number from 2 to 254 Subnet Mask is 255 255 255 0 and Gateway is 192 168 1 1 The Router s default IP address gt Obtain an IP address automatical
67. n the Status drop down list 4 Click the Save button to make the entry take effect Click the Delete button to delete the entry Click the Enable All button to enable all the entries Click the Disable All button to disable all the entries Click the Delete All button to delete all the entries Click the Previous button to view the information in the previous screen click the Next button to view the information in the next screen 4 13 Bandwidth Control Control Settings Figure 4 58 Bandwidth Control There are two submenus under the Bandwidth Control menu as shown in Figure 4 58 Click any of them and you will be able to configure the corresponding function The detailed explanations for each submenu are provided below 4 13 1 Control Settings Choose menu Bandwidth Control Control Settings you can configure the Egress Bandwidth and Ingress Bandwidth in the next screen Their values you configure should be less than 100000Kbps a io ee TL WR740N Wireless Lite N Router Lite N Router Bandwidth Control Settings Enable Bandwidth Control F Line Type ADSL Other Egress Bandwidth Al kbps Ingress Bandwidth 048 kbps Save Figure 4 59 Bandwidth Control Settings cS Note For optimal control of the bandwidth please select the right bandwidth type and ask your ISP for the total bandwidth of the egress and ingress 4 13 2 Rules List Choose menu Bandwidth Control Ru
68. n the screen as shown in Figure 4 35 The DMZ host feature allows one local host to be exposed to the Internet for a special purpose service such as Internet gaming or videoconferencing DMZ host forwards all the ports at the same time Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may be changed when using the DHCP function DMZ Current DMZ Status Enable O Disable DMZ Host IP Address 142 168 1 100 Figure 4 35 DMZ To assign a computer or server to be a DMZ server 1 Check the Enable radio button 2 Enter the IP Address of a local host in the DMZ Host IP Address field 3 Click the Save button fe Note After you set the DMZ host the firewall related to the host will not work 4 8 4 UPnP Choose menu Forwarding UPnP you can view the information about UPnP Universal Plug and Play in the screen as shown in Figure 4 36 The UPnP feature allows the devices such as Internet computers to access the local host resources or devices as needed UPnP devices can be automatically discovered by the UPnP service application on the LAN ae cme TL WR740N Wireless Lite N Router Lite N Router Current UPnP Status Enabled Current UPnP Settings List ID App Description External Port Protocol Internal Port IP Address Status 1 BitComet 192 168 1 100 23959 23959 MER 23959 192168 1 100 Enabled 2 Bit omet
69. nced Transmit Power High Ww Beacon Interval 100 70 1000 RTS Threshold 2346 1 2346 Fragmentation Threshold 2346 256 2346 DTIM Interval 1 1 255 Enable wilh Enable Short Gl C Enable AP Isolation The change of wireless contig will nottake effect until the Router reboots please click here to reboot SAYE Figure 4 23 Wireless Advanced gt Transmit Power Here you can specify the transmit power of Router You can select High Middle or Low which you would like High is the default setting and is recommended gt Beacon Interval Enter a value between 20 1000 milliseconds for Beacon Interval here The beacons are the packets sent by the Router to synchronize a wireless network Beacon Interval value determines the time interval of the beacons The default value is 100 gt RTS Threshold Here you can specify the RTS Request to Send Threshold If the packet is larger than the specified RTS Threshold size the Router will send RTS frames to a particular receiving station and negotiate the sending of a data frame The default value is 2346 gt Fragmentation Threshold This value is the maximum size determining whether packets will be fragmented Setting the Fragmentation Threshold too low may result in poor network performance because of excessive packets 2346 is the default setting and is recommended 44 TL WR740N Wireless Lite N Router Lite N Router gt DTIM Interval This value
70. nd hax Idle Time minutes 0 means remain active at all times Connect Automatically O Time based Connecting Period ofTimefom 0O 0 HHM to 23 59 HAMM O Connect Manually Max Idle Time 15 minutes 0 means remain active al all times Connect Disconnected Figure 4 9 WAN PPPoE gt User Name Password Enter the User Name and Password provided by your ISP These fields are case sensitive gt Secondary Connection It s available only for PPPoE Connection If your ISP provides an extra Connection type such as Dynamic Static IP to connect to a local area network then you can check the radio button of Dynamic Static IP to activate this secondary connection e Disabled The Secondary Connection is disabled by default so there is PPPoE connection only This is recommended e Dynamic IP You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP e Static IP You can check this radio button to use Static IP as the secondary connection to connect to the local area network provided by ISP gt Connect on Demand In this mode the Internet connection can be terminated automatically after a specified inactivity period Max Idle Time and be re established when you attempt to access the Internet again If you want your Internet connection keeps active all the time please enter 0 in the Max Idle Time field Otherwise enter
71. necessary F Use These DNS Servers secondary DNS loooo Optional GetlP with Unicast DHCP tis usually not required Figure 4 7 WAN Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP including IP address Subnet Mask Default Gateway etc Click the Renew button to renew the IP parameters from your ISP Click the Release button to release the IP parameters gt MTU Size The normal MTU Maximum Transmission Unit value for most Ethernet networks is 1500 Bytes It is not recommended that you change the default MTU Size unless required by your ISP gt Use These DNS Servers If your ISP gives you one or two DNS addresses select Use These DNS Servers and enter the primary and secondary addresses into the correct fields Otherwise the DNS servers will be assigned dynamically from your ISP Cf Note If you find error when you go to a website after entering the DNS addresses it is likely that your DNS servers are set up improperly You should contact your ISP to get DNS server addresses gt Get IP with Unicast DHCP A few ISPs DHCP servers do not support the broadcast applications If you cannot get the IP Address normally you can choose this option It is rarely required Click the Save button to save your settings 25 TL WR740N Wireless Lite N Router Lite N Router 2 If your ISP provides a static or fixed IP Address Subnet Mask Gateway and DNS setting
72. nect or disconnect manually After a specified period of inactivity Max Idle Time the Router will disconnect from your Internet connection and you will not be able to re establish your connection automatically as soon as you attempt to access the Internet again To use this option click the radio button If you want your Internet connection to remain active at all times enter 0 in the Max Idle Time field Otherwise enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested Caution Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background Click the Save button to save your settings CSF Note If you don t know how to choose the appropriate connection type click the Detect button to allow the Router to automatically search your Internet connection for servers and protocols The connection type will be reported when an active Internet service is successfully detected by the Router This report is for your reference only To make sure the connection type your ISP provides please refer to the ISP The various types of Internet connections that the Router can detect are as follows e PPPoE Connections which use PPPoE that requires a user name and password e Dynamic IP Connections which use dynamic IP address assignment e Static IP Connections which use static IP ad
73. nection on certain time to the Internet Connects Internet on demand and disconnects from the Internet when idle for PPPoE Built in NAT and DHCP server supporting static IP address distributing Supports Stateful Packet Inspection Supports VPN Passthrough Supports Parental Control and Access Control Provides 64 128 152 bit WEP encryption security and wireless LAN ACL Access Control List Supports Flow Statistics Supports firmware upgrade and Web management 1 4 Panel Layout 1 4 1 The Front Panel ee eee ee AICA PW SYS WLAN 4 WAN Figure 1 1 Front Panel sketch e TL WR740N BRUTA A UE The Router s LEDs and the QSS button are located on the front panel View from left to right QU ECT O Power is off On Power is on o on The Router is initializing SYS The Router is working properly The Router has a system error NAN The Wireless function is disabled The Wireless function is enabled There is a device linked to the corresponding port but there is no activity Flashing There is an active device linked to the corresponding port A wireless device is connecting to the network by QSS Slow Flash function This process will last for about 2 minutes A wireless device has been successfully added to the network by QSS function The LED will keep on for about 5 minutes A wireless device failed to be added to the network by Quick Flash QSS function Table 1 1 The LEDs Description
74. ng this button b To add a new device If the wireless adapter supports Wi Fi Protected Setup WPS you can establish a wireless connection between wireless adapter and Router using either Push Button Configuration PBC method or PIN method Cf Note To build a successful connection by QSS you should also do the corresponding configuration of the new device for QSS function meanwhile For the configuration of the new device here takes the Wireless Adapter of our company for example Il By PBC If the wireless adapter supports Wi Fi Protected Setup and the Push Button Configuration PBC fs TL WR740N Wireless Lite N Router Lite N Router method you can add it to the network by PBC with the following two methods Method One Step 1 Press the QSS button on the front panel of the Router TP LINK CG TL WR740N PWR SYS WLAN 1 2 3 4 WAN Step 2 Press and hold the QSS button of the adapter directly for 2 or 3 seconds Step 3 Wait for a while until the next screen of the adapter configuration appears Click Finish to complete the QSS configuration 055 for Wireless Wireless Configuration Completed Your computer has successfully joined the TP LINK network The QSS Configuration Screen of Wireless Adapter Method Two Step 1 Press the QSS button on the front panel of the Router IN RIIIE TL WR740N PWR SYS WLAN 4 WAN Step 2 For the configuration of the wireless adapter plea
75. ngs page Add a new entry with the Target Description is Target_1 and Domain Name is www google com 64 TL WR740N Wireless Lite N Router Lite N Router 3 Click Access Control Schedule in the left to enter the Schedule Settings page Add a new entry with the Schedule Description is Schedule 1 Day is Sat and Sun Start Time is 1800 and Stop Time is 2000 4 Click Access Control Rule in the left to return to the Access Control Rule Management page Select Enable Internet Access Control and choose Deny the packets not specified by any access control policy to pass through the Router 5 Click Add New button to add a new rule as follows e In Rule Name field create a name for the rule Note that this name should be unique for example Rule_1 e In Host field select Host_1 e In Target field select Target_1 e In Schedule field select Schedule 1 e In Action field select Allow e In Status field select Enable e Click Save to complete the settings Then you will go back to the Access Control Rule Management page and see the following list ID Rule Name Target Schedule Action Status Modify 1 Rule_1 Tarqet 1 schedule 1 Allowed Enabled Modify Delete 4 11 2 Host Choose menu Access Control Host you can view and set a Host list in the screen as shown in Figure 4 48 The host list is necessary for the Access Control Rule Host Settings ID Host Description information Mod
76. ngs page and see the following list D Schedule Description Day Time Modify schedule_1 Sat Sun 1600 2000 Edit Delete 4 12 Static Routing Choose menu Static Routing and you can configure the static route in the next screen shown in Figure 4 56 A static route is a pre determined path that network information must travel to reach a specific host or network Static Routing ID Destination IP Address Subnet Mask Default Gateway Status Modify 202 108 37 42 255 255 255 0 202 108 37 1 Disabled Modify Delete Add New Enable All Disable All Delete All Figure 4 56 Static Routing To add static routing entries follow the steps below 1 Click Add New shown in Figure 4 56 you will see the following screen Figure 4 57 Add or Modify a Static Route Entry Destination IP Address A Subnet Mask Status Enabled Y Figure 4 57 Add or Modify a Static Route Entry 2 Enter the following data gt Destination IP Address The Destination IP Address is the address of the network or host that you want to assign to a static route 1 TL WR740N Wireless Lite N Router Lite N Router gt Subnet Mask The Subnet Mask determines which portion of an IP Address is the network portion and which portion is the host portion gt Gateway This is the IP Address of the gateway device that allows for contact between the Router and the network or host 3 Select Enabled or Disabled for this entry o
77. nnnnrrnnrenanans 8 Sek TEGPAP CONQUE AA 8 32 Quick lastalato GUISA O 10 Chapter 4 Configuring the Router cccooocccconcnccccccoccccnconcoconcnnonnnnnconnnnnrornnnnrrrnnnnnrrrnnnrernnnnrrrrnannrennanas 15 Al MOG y ICC o donaicsunana dati Nncaisiy by radespinlane na intl daneadel vaaueatinagautediaauaiy aa caaspelanten eda 15 AZ SUAS AA A 15 4 3 QUICK CUP o A 17 A USO A pisa 17 A tig E fetes A E damian 23 Aok A e on a aut ieeie anneal 23 L2 WAN o AP A sate teescineanaeeietensauie 24 AS MAC CIONO misil ld 35 AO AMICS ct taco 36 46 1 VI SIESS S CNO Sri dai oe nes eee tone 36 46 2 Wireless SCCUMMLY ssi cot oes eda wae Beeadie en ana oti aera 38 46 3 Wireless MAC EFINGING 2 aora 41 46 4 Wireless Advanced aieiai dde 44 4 7 4 8 4 9 4 10 4 11 4 12 4 13 4 14 4 15 PP A el aemadee tetas 46 Aral DACP SE tn noel iS 46 Ara DAIGP CICS Lidia aii 47 4 7 3 Address Reservation ii A nenn m teeren 48 FO IW ANCUNIG e a E E E ates ne oes 49 AO AU N S N A E ame menee sve N ae 49 A o EA 51 O naNO Gaia aeaeh eae A ae eeu itera ads 53 ASA cage On ee a ee ee fe ee Te eee 53 A IS OEIC E te ere eR 54 AS ll Basi Secas 54 49 2 Adyanced SECuUry cesta aliaron 56 4 9 3 Local Management ccoooncccccnccoccnococoncconnncnonnconanoconannnnnannnnnnnnnnannnnnnnnnnananennnnnnnas 57 4 9 4 Remote ManageMent oocccconcccccccococonoccnnonononcnnnnnnonnnnnnannnnnnnnnnnnnnnnnnnnnananinannnnnas 58 Parental CO
78. not change unless necessary Use IF address specified by ISP ISP Specified IP Address ooo Detect Online Interval FU Seconds 0 120 seconds the default is 0 0 means not detecting Use the following ONS Servers Secondary ONS ooon Optional Figure 4 10 PPPoE Advanced Settings gt MTU Size The default MTU size is 1480 bytes which is usually fine It is not recommended that you change the default MTU Size unless required by your ISP gt Service Name AC Name The service name and AC Access Concentrator name should not be configured unless you are sure it is necessary for your ISP In most cases leaving these fields blank will work gt ISP Specified IP Address If your ISP does not automatically assign IP addresses to the Router during login please click Use IP address specified by ISP check box and enter the IP address provided by your ISP in dotted decimal notation gt Detect Online Interval The Router will detect Access Concentrator online at every interval The default value is 0 You can input the value between 0 and 120 The value 0 means no detect gt Primary DNS Secondary DNS If your ISP does not automatically assign DNS addresses to the Router during login please click Use the following DNS servers check box and enter the IP address in dotted decimal notation of your ISP s primary DNS server If a secondary DNS server address is avai
79. not necessary if the Router is connected directly to the Ethernet PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors TCP IP protocol on each PC Web browser such as Microsoft Internet Explorer Mozilla Firefox or Apple Safari 2 2 Installation Environment Requirements Place the Router in a well ventilated place far from any heater or heating vent Avoid direct irradiation of any strong light such as sunlight Keep at least 2 inches 5 cm of clear space around the Router Operating Temperature 0 C 40 C 32 F 104 F Operating Humidity 10 90 RH Non condensing 2 3 Connecting the Router Before installing the Router make sure your PC is connected to the Internet through the broadband service successfully If there is any problem please contact your ISP After that please install the Router according to the following steps Don t forget to pull out the power plug and keep your hands dry 1 Power off your PC Cable DSL Modem and the Router 2 Locate an optimum location for the Router The best place is usually at the center of your wireless network 3 Adjust the direction of the antenna Normally upright is a good direction 4 Connect the PC s and each Switch Hub in your LAN to the LAN Ports on the Router shown in Figure 2 1 If you have the wireless NIC and want to use the wireless function you can skip this step 5 Connect the DSL Cable Modem to the WAN port on the Router shown i
80. ntry click the Delete 2 Modify the information 3 Click the Save button Click the Enable Disabled All button to make all entries enabled disabled Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the previous page 4 8 Forwarding Virtual Servers Figure 4 30 The Forwarding menu There are four submenus under the Forwarding menu shown in Figure 4 30 Virtual Servers Port Triggering DMZ and UPnP Click any of them and you will be able to configure the corresponding function 4 8 1 Virtual Servers Choose menu Forwarding Virtual Servers you can view and add virtual servers in the screen as shown in Figure 4 31 Virtual servers can be used for setting up public services on your LAN such as DNS Email and FTP A virtual server is defined as a service port and all requests from the Internet to this service port will be redirected to the computer specified by the server IP Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address may be changed when using the DHCP function Virtual Servers ID Service Port IP Address Protocol Status Modify 1 21 1942 168 1 101 ALL Enabled Modify Delete Add Mew Enable All Disable All Delete All Figure 4 31 Virtual Servers 49 TL WR740N Wireless Lite N Router Lite N Router gt Service Port The numbers of External Po
81. nu System Tools Diagnostic you can transact Ping or Traceroute function to check connectivity of your network in the following screen Diagnostic Tools Diagnostic Parameters Diagnostic Tool IP Address Domain Name Ping Count Ping Packet Size Ping Timeout Traceroute Max TTL Diagnostic Results The Router is ready Ping O Traceroute IO 4 c 50 64 4 1472 Bytes 100 2000 Milliseconds jo c1 30 Figure 4 72 Diagnostic Tools gt Diagnostic Tool Check the radio button to select one diagnostic too e Ping This diagnostic tool troubleshoots connectivity reachability and name resolution to a given host or gateway e Traceroute This diagnostic tool tests the performance of a connection Cf Note You can use ping traceroute to test both numeric IP address or domain name If pinging tracerouting the IP address is successful but pinging tracerouting the domain name is not you might have a name resolution problem In this case ensure that the domain name you are specifying can be resolved by using Domain Name System DNS queries 82 TL WR740N Wireless Lite N Router Lite N Router gt IP Address Domain Name Type the destination IP address such as 202 108 22 5 or Domain name such as www tp link com gt Pings Count The number of Ping packets for a Ping connection Ping Packet Size The size of Ping packet Ping Timeout Set the waiting time for the r
82. o confirm Click the Save button when finished Click the Clear All button to clear all 4 16 8 System log Choose menu System Tools System Log you can view the logs of the Router 86 TL WR740N Wireless Lite N Router Lite N Router System Log Auto Mail Feature Disabled index Time Type 1 ist day 01 43 47 OTHER 1st day 01 44 31 DHCP 1st day 01 44 31 DHCP 1st day 01 44 31 DHCP 1st day 01 44 31 DHCP 1st day 01 44 31 DHCP Mail settings Log Level ALL v Level Log Content IMFO User clear system log MOTICE DHCPS Recy DISCOVER from 00 19 66 80 52 E4 MOTICE DACPS Send OFFER with ip 192 168 1 107 NOTICE DHCPS Recy REQUEST from 00 1 9 66 80 52 E4 MOTICE DHCPS rong Server id or request an invalid ip NOTICE DHOPS Send NAK Time 2000 01 01 1 45 08 6309s H Ver WR 40N v1 00000000 S Ver 3 8 10 Build 090611 Rel 39157n L 192 168 1 1 M 255 255 255 0 Wi DHCP W 0 0 0 0 M 0 0 0 0 G 0 0 0 0 Mail Log Clear Log Figure 4 79 System Log gt Auto Mail Feature Indicates whether auto mail feature is enabled or not gt Mail Settings Set the receiving and sending mailbox address server address validation information as well as the timetable for Auto Mail Feature as shown in Figure 4 80 87 TL WR740N Wireless Lite N Router Lite N Router Mail Account Settings From To SMTP Server Authentication User Name Password Confirm The Passw
83. o the Router by typing 192 168 1 1 88 the Router s LAN IP address Web Management Port in the address field of the Web browser 3 Log in to the Router click the Forwarding menu on the left of your browser and click 94 TL WR740N Wireless Lite N Router Lite N Router the Virtual Servers submenu On the Virtual Servers page click Add New then on the Add or Modify a Virtual Server page enter 80 into the blank next to the Service Port and your IP address next to the IP Address assuming 192 168 1 188 for an example remember to Enable and Save Virtual Servers ID Service Port IP Address Protocol Status Add Mew Figure A 9 Virtual Servers Add or Modify a Virtual Server Entry Service Port AAA OF BOA IP Address 1921681188 Protocol ALL e Status Enabled v Common Service Port Select Orne wt Figure A 10 Add or Modify a Virtual server Entry 5 The wireless stations cannot connect to the Router 1 Make sure the Enable Wireless Router Radio is checked 2 Make sure that the wireless stations SSID accord with the Router s SSID 3 Make sure the wireless stations have right KEY for encryption when the Router is encrypted 4 Ifthe wireless connection is ready but you can t access the Router check the IP Address of your wireless stations 95 TL WR740N Wireless Lite N Router Lite N Router Appendix B Configuring the PC In this
84. old 5 3600 Facketsis Ignore Ping Packet From WAN Port Forbid Ping Packet From LAN Port Blocked Dos Host List Figure 4 39 Advanced Security gt Packets Statistics Interval 5 60 The default value is 10 Select a value between 5 and 60 seconds from the drop down list The Packets Statistics Interval value indicates the time section of the packets statistics The result of the statistics is used for analysis by SYN Flood UDP Flood and ICMP Flood 56 TL WR740N Wireless Lite N Router Lite N Router gt DoS protection Denial of Service protection Check the Enable or Disable button to enable or disable the DoS protection function Only when it is enabled will the flood filters be enabled Ss Note Dos Protection will take effect only when the Traffic Statistics in System Tool Traffic Statistics is enabled gt Enable ICMP FLOOD Attack Filtering Enable or Disable the ICMP FLOOD Attack Filtering gt ICMP FLOOD Packets Threshold 5 3600 The default value is 50 Enter a value between 5 3600 When the current ICMP FLOOD Packets number is beyond the set value the Router will startup the blocking function immediately gt Enable UDP FLOOD Filtering Enable or Disable the UDP FLOOD Filtering gt UDP FLOOD Packets Threshold 5 3600 The default value is 500 Enter a value between 5 3600 When the current UPD FLOOD Packets number is beyond the set value the Router will startup
85. ord F Enable Auto Mail Feature Everyday mail the log at Ha foo Mail the log every 48 hours Figure 4 80 Mail Account Settings e From Your mail box address The Router would connect it to send logs e To Recipient s address The destination mailbox where the logs would be received e SMTP Server Your smtp server It corresponds with the mailbox filled in the From field You can log on the relevant website for Help if you are not clear with the address e Authentication Most SMTP Server requires Authentication It is required by most mailboxes that need User Name and Password to log in cS Note Only when you select Authentication do you have to enter the User Name and Password in the following fields e User Name Your mail account name filled in the From field The part behind is excluded e Password Your mail account password e Confirm The Password Enter the password again to confirm e Enable Auto Mail Feature Select it to mail logs automatically You could mail the current logs either at a specified time everyday or by intervals but only one could be 88 TL WR740N Wireless Lite N Router Lite N Router the current effective rule Enter the desired time or intervals in the corresponding field as shown in Figure 4 80 Click Save to keep your settings Click Back to return to the previous page gt Log Type By selecting the log type only logs of this type will be shown gt
86. outer provides flexible access control so that parents or network administrators can establish restricted access policies for children or staff lt also supports Virtual Server and DMZ host for Port Triggering and then the network administrators can manage and monitor the network in real time with the remote management function Simple Installation Since the Router is compatible with virtually all the major operating systems it is very easy to manage Quick Setup Wizard is supported and detailed instructions are provided step by step in this user guide Before installing the Router please look through this guide to know all the Router s functions TL WR740N Wireless Lite N Router Lite N Router 1 2 Conventions The Router or TL WR740N mentioned in this guide stands for TL WR740N Wireless Lite N Router without any explanation 1 3 Main Features gt Vv Vv Y Y Y Y VY V YV v v Make use of IEEE 802 11n wireless technology to provide a wireless data rate of up to 150Mbps One 10 100M Auto Negotiation RJ45 WAN port four 10 100M Auto Negotiation RJ45 LAN ports supporting Auto MDI MDIX Provides WPA WPA2 WPA PSK WPA2 PSK authentication TKIP AES encryption security Shares data and Internet access for users supporting Dynamic IP Static IP PPPoE Internet access Supports Virtual Server Special Application and DMZ host Supports UPnP Dynamic DNS Static Routing Provides Automatic connection and Scheduled Con
87. r Domain Name e lf you select IP Address the screen shown is Figure 4 52 Ds TL WR740N Wireless Lite N Router Lite N Router Add or Modify an Access Target Entry Target Description Po Target Port E Protocol Common Service Port please select ha TEME Back Figure 4 52 Add or Modify an Access Target Entry 1 In Target Description field create a unique description for the target e g Target_1 2 In IP Address field enter the IP address of the target 3 Select a common service from Common Service Port drop down list so that the Target Port will be automatically filled If the Common Service Port drop down list don t have the service you want specify the Target Port manually 4 In Protocol field select TCP UDP ICMP or ALL If you select Domain Name the screen shown is Figure 4 53 Add or Modify an Access Target Entry Figure 4 53 Add or Modify an Access Target Entry 1 In Target Description field create a unique description for the target e g Target _1 68 TL WR740N Wireless Lite N Router Lite N Router 2 In Domain Name field enter the domain name in the blank You can enter 4 domain names 3 Click the Save button Click the Delete All button to delete all the entries in the table Click the Next button to go to the next page or click the Previous button return to the previous page For example If you desire to restrict the internet activities of host with MAC
88. r the IP amp MAC Binding menu shown in Figure 4 62 Binding Setting and ARP List Click any of them and you will be able to scan or configure the corresponding function The detailed explanations for each submenu are provided below 4 14 1 Binding Settings This page displays the IP amp MAC Binding Setting table you can operate it in accord with your desire as shown in Figure 4 63 Binding Settings ARP Binding Disable Enable ID MAC Address IP Address Bind Modify The listis empty Add New Figure 4 63 Binding Settings gt MAC Address The MAC address of the controlled computer in the LAN 74 TL WR740N Wireless Lite N Router Lite N Router gt IP Address The assigned IP address of the controlled computer in the LAN gt Bind Check this option to enable ARP binding for a specific device gt Modify To modify or delete an existing entry When you want to add or modify an IP amp MAC Binding entry you can click the Add New button or Modify button and then you will go to the next page This page is used for adding or modifying an IP MAC Binding entry shown in Figure 4 64 IP amp MAC Binding Settings Bind w Figure 4 64 IP amp MAC Binding Settings To add IP amp MAC Binding entries follow the steps below 1 Click the Add New button as shown in Figure 4 63 2 Enter the MAC Address and IP Address Select the Bind checkbox w Click the Save button
89. reen as below lt 39 TL WR740N Wireless Lite N Router Lite N Router MAC Address 00 25 06 25 43 15 IP Address 19 168 1 1 Subnet Mask J255 255 255 0 SAVE Figure 4 6 LAN gt MAC Address The physical address of the Router as seen from the LAN The value can t be changed gt IP Address Enter the IP address of your Router or reset it in dotted decimal notation factory default 192 168 1 1 gt Subnet Mask An address code that determines the size of the network Normally use 255 255 255 0 as the subnet mask Cf Note a If you change the IP Address of LAN you must use the new IP Address to log in the Router b Ifthe new LAN IP Address you set is not in the same subnet the IP Address pool of the DHCP server will change accordingly at the same time while the Virtual Server and DMZ Host will not take effect until they are re configured 4 5 2 WAN Choose menu Network WAN you can configure the IP parameters of the WAN on the screen below 1 If your ISP provides the DHCP service please choose Dynamic IP type and the Router will automatically get IP parameters from your ISP You can see the page as follows Figure 4 7 J TL WR740N Wireless Lite N Router Lite N Router WAN WAN Connection Type Dynamic IP gt IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Default Gateway 0 0 0 0 Renew MTU Size in bytes 1500 The defaultis 1500 do not change unless
90. rts You can type a service port or a range of service ports in XXX YYY format XXX is the start port number YYY is the end port number gt IP Address The IP Address of the PC providing the service application gt Protocol The protocol used for this application either TCP UDP or All all protocols supported by the Router gt Status The status of this entry either Enabled or Disabled To setup a virtual server entry 1 Click the Add New button the next screen will pop up as shown in Figure 4 32 2 Select the service port you want to use from the Common Service Port list If the Common Service Port list does not have the service that you want to use type the service port number or service port range in the Service Port box 3 Type the IP Address of the computer in the IP Address box 4 Select the protocol used for this application either TCP UDP or All 5 Select the Enable to enable the virtual server 6 Click the Save button Add or Modify a Virtual Server Entry Service Port fs CARR OF BOX IP Address po Common Service Port Figure 4 32 Add or Modify a Virtual Server Entry ce Note If your computer or server has more than one type of available service please select another service and enter the same IP Address for that computer or server To modify or delete an existing entry 1 Click the Modify in the entry you want to modify If you want to delete the entry click the Del
91. rvice 4 15 3 No ip com DDNS If you select www no ip com the page will appear as shown in Figure 4 69 E TL WR740N Wireless Lite N Router Lite N Router DDNS service Provider Bbo 1P ri as MO If com Goto register User Name Username Password Domain Name Enable DONS Connection Status DONS not launching DAVE Figure 4 69 No ip com DDNS Settings To set up for DDNS follow these instructions 1 Type the User Name for your DDNS account 2 Type the Password for your DDNS account 3 Type the Domain Name you received from dynamic DNS service provider 4 Click the Login button to log in the DDNS service Connection Status The status of the DDNS service connection is displayed here Click Logout to log out the DDNS service 4 16 System Tools Time Settings Figure 4 70 The System Tools menu Choose menu System Tools you can see the submenus under the main menu Time Settings 80 TL WR740N Wireless Lite N Router Lite N Router Diagnostic Firmware Upgrade Factory Defaults Backup amp Restore Reboot Password System Log and Statistics Click any of them and you will be able to configure the corresponding function The detailed explanations for each submenu are provided below 4 16 1 Time Settings Choose menu System Tools Time Settings you can configure the time on the following screen Time Settings Time zone SMT 08 00 Beijing Hong
92. s over Internet Protocol IP networks through the use of cryptographic security services To allow IPSec tunnels to pass through the Router keep the default Enabled gt ALG It is recommended to enable Application Layer Gateway ALG because ALG allows 55 TL WR740N Wireless Lite N Router Lite N Router customized Network Address Translation NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer control data protocols such as FTP TFTP H323 etc e FTP ALG To allow FTP clients and servers to transfer data across NAT keep the default Enable e TFTP ALG To allow TFTP clients and servers to transfer data across NAT keep the default Enable e H323 ALG To allow Microsoft NetMeeting clients to communicate across NAT keep the default Enable Click the Save button to save your settings 4 9 2 Advanced Security Choose menu Security Advanced Security you can protect the Router from being attacked by TCP SYN Flood UDP Flood and ICMP Flood in the screen as shown in Figure 4 39 Advanced Security Packets Statistics Interval 5 60 seconds Dos Protection Disable gt Enable Enable ICMP FLOOD Attack Filtering ICMP FLOOD Packets Threshold 5 3600 Packets s JEnable UDP FLOOD Filtering UDP FLOOD Packets Threshold 5 3600 500 Packets s Enable TOP SYN FLOOD Attack Filtering TCP SYN FLOOD Packets Thresh
93. s shown in the figure above Then click Connect Cf Note The PIN code of the adapter is always displayed on the QSS configuration screen Step 3 For the configuration of the wireless adapter please choose Enter a PIN into my access point or a registrar in the configuration utility of the QSS as below and click Next 21 TL WR740N BRUTA A Ue Ea 055 for Wireless Join a Wireless Network O55 le preparing to join pour computer to a wireless network Which setup method do you want to use C Push the button on my access point OSs Enter a PIN into my access point or a registrar C Enter the PIN from my access point 16952898 hto pour access point or external registrar and click Nest to continue Automatically select the network The QSS Configuration Screen of Wireless Adapter CSF Note In this example the default PIN code of this adapter is 16952898 as the above figure shown Method Two Enter the PIN from my Router Step 1 Get the Current PIN code of the Router in Figure 4 3 each Router has its unique PIN code Here takes the PIN code 12345670 of this Router for example Step 2 For the configuration of the wireless adapter please choose Enter the PIN from my access point in the configuration utility of the QSS as below and enter the PIN code of the Router into the field after Access Point PIN Then click Next 055 for Wireless Join a Wireless Network O55 is preparing
94. se choose Push the button on my access point in the configuration utility of the ASS as below and click Next 18 TL WR740N Wireless Lite N Router Lite N Router OSS for Wireless Join a Wireless Network O55 le preparing to join pour computer to a wireless network Which setup method do pon want to use Push the button on my access point O Enter a PIN into my access point or a registrar Enter the PIN from my access point Push the button on your access point and click Nest to continue Automatically select the network The QSS Configuration Screen of Wireless Adapter Step 3 Wait for a while until the next screen appears Click Finish to complete the QSS configuration ba 055 for Wireless Wireless Configuration Completed four computer has successfully joined the TP LINK network Cancel The QSS Configuration Screen of Wireless Adapter Method Three Step 1 Keep the default QSS Status as Enabled and click the Add device button in Figure 4 3 then the following screen will appear 19 TL WR740N Wireless Lite N Router Lite N Router Add A New Device Enter the new device s PIN O Press the button of the new device in two minutes Figure 4 4 Add A New Device Step 2 Choose Press the button of the new device in two minutes and click Connect Step 3 For the configuration of the wireless adapter please choose Push the button on my
95. t gaming or videoconferencing gt DNS Domain Name System An Internet Service that translates the names of websites into IP addresses gt Domain Name A descriptive name for an address or group of addresses on the Internet gt DSL Digital Subscriber Line A technology that allows data to be sent or received over existing traditional phone lines gt ISP Internet Service Provider A company that provides access to the Internet gt MTU Maximum Transmission Unit The size in bytes of the largest packet that can be transmitted gt NAT Network Address Translation NAT technology translates IP addresses of a local area network to a different IP address for the Internet gt PPPoE Point to Point Protocol over Ethernet PPPoE is a protocol for connecting remote hosts to the Internet over an always on connection by simulating a dial up connection gt SSID A Service Set Identification is a thirty two character maximum alphanumeric key identifying a wireless local area network For the wireless devices in a network to communicate with each other all devices must be configured with the same SSID This is typically the configuration parameter for a wireless PC card It corresponds to the ESSID in the wireless Access Point and to the wireless network name 101 TL WR740N Wireless Lite N Router Lite N Router gt WEP Wired Equivalent Privacy A data privacy mechanism based on a 64 bit or
96. t screen will appear as shown in Figure 3 8 Quick Setup Static IP IP Address 0 0 0 0 Subnet Mask 0 0 0 0 Default Gateway 0 0 0 0 Optional Primary DNS O0 0 0 Optional Secondary DNS 0 0 0 0 Optional Figure 3 8 Quick Setup Static IP gt IP Address This is the WAN IP address as seen by external users on the Internet including your ISP Enter the IP address into the field gt Subnet Mask The Subnet Mask is used for the WAN IP address it is usually 255 255 255 0 gt Default Gateway Enter the gateway IP address into the box if required gt Primary DNS Enter the DNS Server IP address into the box if required gt Secondary DNS If your ISP provides another DNS server enter it into this field 5 Click Next to continue the Wireless settings page will appear as shown in Figure 3 9 ls TL WR740N Wireless Lite N Router Lite N Router Quick Setup Wireless Wireless Radio Enable SSID TP LINK_ 254318 Region United States Channel e Mode 11bgn mixed Channel Width Automatic Max Tx Rate 150Mbps Wireless Security e Disable Security O WPA PSKWPA2 PSK PSK Password fou can enter ASCII characters between 8 and 63 characters or 6 to 64 Hexadecimal characters O No Change Figure 3 9 Quick Setup Wireless gt Wireless Radio Enable or disable the wireless radio choosing from the pull down list gt SSID Enter a value of up to 32 characters The
97. te N Router Lite N Router Appendix A FAQ 1 How do configure the Router to access the Internet by ADSL users 1 First configure the ADSL Modem configured in RFC1483 bridge model 2 Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router The telephone cord plugs into the Line port of the ADSL Modem 3 Log in to the Router click the Network menu on the left of your browser and click WAN submenu On the WAN page select PPPoE for WAN Connection Type Type user name in the User Name field and password in the Password field finish by clicking Connect WAN Connection Type PPPoE T User Name username Password Figure A 1 PPPoE Connection Type 4 If your ADSL lease is in pay according time mode select Connect on Demand or Connect Manually for Internet connection mode Type an appropriate number for Max Idle Time to avoid wasting paid time Otherwise you can select Auto connecting for Internet connection mode Wan Connection Mode Connect on Demand hax Idle Time minutes 0 means remain active at all times O Connect Automatically 5 Time based Connecting Period ofTimesrom 0 lo HH MM to 23 59 HHMM O Connect Manually hax Idle Time 15 minutes 0 means remain active at all times Connect Disconnected Figure A 2 PPPoE Connection Mode Cf Note I Sometimes the connection cannot be disconnected although yo
98. the Effective Time drop down list e In Status field select Enable 4 Click Save to complete the settings Then you will go back to the Parental Control Settings page and see the following list as shown in Figure 4 44 ID MAC address Website Description Schedule Status Modify 1 0D 11 22 33 44 AA Allow Google schedule_1 Enabled Edit Delete Add Mew Enable All Disable All Delete All Figure 4 44 Parental Control Settings 4 11 Access Control Figure 4 45 Access Control There are four submenus under the Access Control menu as shown in Figure 4 45 Rule Host Target and Schedule Click any of them and you will be able to configure the corresponding function 4 11 1 Rule Choose menu Access Control Rule you can view and set Access Control rules in the screen as shown in Figure 4 46 ls TL WR740N Wireless Lite N Router Lite N Router Vv Vv V V WV gt Access Control Rule Management Enable Internet Access Control Default Filter Policy O Allow the packets not specified by any access control policy to pass through the Router Deny the packets not specified by any access control policy to pass through the Router Dave ID Rule Name Host Target schedule Action Status Modify 1 fule_1 Host 1 Target 1 Schedule 1 Allowed Enabled tlodity Delete Add Mew Enable All Disable All Delete All Figure 4 46 Access Control Rule Management Enable Internet Access Control Select the check
99. the Router The time can be setin System Tools Time settings MAC Address of Child PC o am MAC Address In Current LAN please select 44 Website Description Allowed Domain Name Pp ee PO PO Pp pT SSS pO The time schedule can be setin Access Cantrol Schedule Status Enabled Figure 4 43 Add or Modify Parental Control Entry For example If you desire that the child PC with MAC address 00 11 22 33 44 AA can access www google com on Saturday only while the parent PC with MAC address 00 11 22 33 44 BB is without any restriction you should follow the settings below 1 Click Parental Control menu on the left to enter the Parental Control Settings page Check Enable and enter the MAC address 00 11 22 33 44 BB in the MAC Address of Parental PC field Gie TL WR740N Wireless Lite N Router Lite N Router 2 Click Access Control Schedule on the left to enter the Schedule Settings page Click Add New button to create a new schedule with Schedule Description is Schedule 1 Day is Sat and Time is all day 24 hours 3 Click Parental Control menu on the left to go back to the Add or Modify Parental Control Entry page e Click Add New button e Enter 00 11 22 33 44 AA in the MAC Address of Child PC field e Enter Allow Google in the Website Description field e Enter www google com in the Allowed Domain Name field e Select Schedule 1 you create just now from
100. the blocking function immediately gt Enable TCP SYN FLOOD Attack Filtering Enable or Disable the TCP SYN FLOOD Attack Filtering gt TCP SYN FLOOD Packets Threshold 5 3600 The default value is 50 Enter a value between 5 3600 When the current TCP SYN FLOOD Packets numbers is beyond the set value the Router will startup the blocking function immediately gt Ignore Ping Packet From WAN Port Enable or Disable Ignore Ping Packet From WAN Port The default setting is disabled If enabled the ping packet from the Internet cannot access the Router gt Forbid Ping Packet From LAN Port Enable or Disable Forbid Ping Packet From LAN Port The default setting is disabled If enabled the ping packet from LAN cannot access the Router This function can be used to defend against some viruses Click the Save button to save the settings Click the Blocked DoS Host List button to display the DoS host table by blocking 4 9 3 Local Management Choose menu Security Local Management you can configure the management rule in the screen as shown in Figure 4 40 The management feature allows you to deny computers in LAN from accessing the Router 57 TL WR740N Wireless Lite N Router Lite N Router Local Management Management Rules Allthe PCs on the LAN are allowed to access the Router s Web Based Utility Only the PCs listed can browse the builtin web pages to perform Administrator tasks MAC 1 MAC 2
101. the matching WEP key that you create Make sure these values are identical on all wireless stations in your network e Key Type You can select the WEP key length 64 bit or 128 bit or 152 bit for encryption Disabled means this WEP key entry is invalid 64 bit You can enter 10 hexadecimal digits any combination of 0 9 a f A F zero key is not promoted or 5 ASCII characters 128 bit You can enter 26 hexadecimal digits any combination of 0 9 a f A F zero key is not promoted or 13 ASCII characters 152 bit You can enter 32 hexadecimal digits any combination of 0 9 a f A F zero key is not promoted or 16 ASCII characters Cf Note If you do not set the key the wireless security function is still disabled even if you have selected Shared Key as Authentication Type gt WPA WPA2 It s based on Radius Server e Version you can choose the version of the WPA security on the pull down list The default setting is Automatic which can select WPA Wi Fi Protected Access or WPA2 WPA version 2 automatically based on the wireless station s capability and request e Encryption You can select either Automatic or TKIP or AES cS Note If you check the WPA WPA2 radio button and choose TKIP encryption you will find a notice in red as shown in Figure 4 19 WPA WPA2 Version Encryption Radius Server IP Radius Port 1612 1 65535 0 stands for default port 1812 Group Key Update Period jo fn
102. the previous page For example lf you desire to restrict the internet activities of host with MAC address 00 11 22 33 44 AA you should first follow the settings below 1 Click Add New button in Figure 4 48 to enter the Add or Modify a Host Entry page 66 TL WR740N Wireless Lite N Router Lite N Router 2 In Mode field select MAC Address from the drop down list 3 In Host Description field create a unique description for the host e g Host_1 4 In MAC Address field enter 00 1 1 22 33 44 AA 5 Click Save to complete the settings Then you will go back to the Host Settings page and see the following list iD Host Description information Modify 1 Host MAC 00 11 24 33 44 AA Edit Delete 4 11 3 Target Choose menu Access Control Target you can view and set a Target list in the screen as shown in Figure 4 51 The target list is necessary for the Access Control Rule Target Settings ID Target Description Information Modify 1 Target 192 168 1 2 192 168 1 2 321TCFP Edit Delete Add New Delete All Page Figure 4 51 Target Settings gt Target Description Here displays the description about the target and this description is unique gt Information The target can be an IP address a port or a domain name gt Modify To modify or delete an existing entry To add a new entry please follow the steps below 1 Click the Add New button 2 In Mode field select IP Address o
103. to join Your computer to a wireless network Which setup method do you want to use Push the button on my access point OSS Enter a PIN into my access point or a registrar Enter the PIN from my access point Enter the PIN from your access point below and click Nest to continue Access Point PIN 12345670 Automatically select the network The QSS Configuration Screen of Wireless Adapter 22 TL WR740N Wireless Lite N Router Lite N Router Cs Note The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4 3 c You will see the following screen when the new device successfully connected to the network Add A New Device O Enter the new device s PIN Press the button of the new device in two minutes Connect successfully Cf Note a The QSS LED on the Router will light green for five minutes if the device has been successfully added to the network b The QSS function cannot be configured if the Wireless Function of the Router is disabled Please make sure the Wireless Function is enabled before configuring the QSS 4 5 Network Figure 4 5 the Network menu There are three submenus under the Network menu shown in Figure 4 5 LAN WAN and MAC Clone Click any of them and you will be able to configure the corresponding function 4 5 1 LAN Choose menu Network LAN you can configure the IP parameters of the LAN on the sc
104. u specify a time to Max Idle Time since some applications is visiting the Internet continually in the background ii If you are a Cable user please configure the Router following the above steps 2 How do I configure the Router to access the Internet by Ethernet users 91 TL WR740N Wireless Lite N Router Lite N Router 1 Log in to the Router click the Network menu on the left of your browser and click WAN submenu On the WAN page select Dynamic IP for WAN Connection Type finish by clicking Save Some ISPs require that you register the MAC Address of your adapter which is connected to your cable DSL Modem during installation If your ISP requires MAC register log in to the Router and click the Network menu link on the left of your browser and then click MAC Clone submenu link On the MAC Clone page if your PC s MAC address is proper MAC address click the Clone MAC Address button and your PC s MAC address will fill in the WAN MAC Address field Or else type the MAC Address into the WAN MAC Address field The format for the MAC Address is XX XX XX XX XX XX Then click the Save button It will take effect after rebooting MAC Clone WAN MAC Address 00 1 D OF 36 88 8F Restore Factory MAC Your PC s MAC Address 00 19 66 80 53 8D Clone MAC Address Figure A 3 MAC Clone 3 I want to use NetMeeting what do I need to do 1 2 If you start NetMeeting as a sponsor you
105. wireless stations will be able to connect the Router without encryption It is recommended strongly that you choose one of following options to enable security gt WPA PSK WPA2 PSK Select WPA based on pre shared passphrase e PSK Password You can enter ASCII or Hexadecimal characters For ASCII the key can be made up of any numbers 0 to 9 and any letters A to Z the length should be between 8 and 63 characters For Hexadecimal the key can be made up of any numbers 0 to 9 and letters A to F the length should be between 8 and 64 characters Please also note the key is case sensitive this means that upper and lower case keys will affect the outcome It would also be a good idea to write down the key and all related wireless security settings gt No Change If you chose this option wireless security configuration will not change These settings are only for basic wireless parameters For advanced settings please refer to Section 4 6 Wireless 6 Click the Next button You will then see the Finish page If you don t make any changes on the Wireless page you will see the Finish page as shown in Figure 3 10 Click the Finish button to finish the Quick Setup Quick Setup Finish Congratulations The Router is now connecting you to the Internet For detail settings please click other menus if necessary Figure 3 10 Quick Setup Finish If there are something changed on the Wireless page you will see the
106. with MAC address 00 OA EB BO 00 0B and the wireless station B with MAC address 00 OA EB 00 07 5F are able to access the Router but all the other wireless stations cannot access the Router you can configure the Wireless MAC Address Filtering list by following these steps 1 Click the Enable button to enable this function 2 Select the radio button Deny the stations not specified by any enabled entries in the list to access for Filtering Rules 3 Delete all or disable all entries if there are any entries already 4 Click the Add New button Enter the MAC address 00 0A EB B0 00 0B 00 0A EB 00 07 5F in the MAC Address field 2 Enter wireless station A B in the Description field 3 Select Enabled in the Status pull down list 4 Click the Save button 5 Click the Back button The filtering rules that configured should be similar to the following list 43 TL WR740N Wireless Lite N Router Lite N Router Filtering Rules O Allow the stations not specified by any enabled entries in the listto access Deny the stations not specified by any enabled entries in the listto access ID MAC Address Status Description Modify 1 00 0A EB B0 00 0B6 Enabled Wireless Station A Modify Delete 2 00 04 EB 00 07 5F Enabled Wireless Station B Modify Delete 4 6 4 Wireless Advanced Choose menu Wireless Wireless Advanced you can configure the advanced settings of your wireless network Wireless Adva
107. wn in Figure 4 55 Advance Schedule Settings Schedule Description Po Day Everyday Select Days Won Tue Wed Thu Fri oat Time all day 24 hours Start Time HH MART Stop Time HA hab Figure 4 55 Advanced Schedule Settings 2 In Schedule Description field create a unique description for the schedule e g Schedule_1 3 In Day field select the day or days you need 4 In Time field you can select all day 24 hours or you may enter the Start Time and Stop Time in the corresponding field 5 Click Save to complete the settings Click the Delete All button to delete all the entries in the table Click the Next button to go to the next page or click the Previous button return to the previous page For example If you desire to restrict the internet activities of host with MAC address 00 11 22 33 44 AA to access www google com only from 18 00 to 20 00 on Saturday and Sunday you should first follow the settings below 1 Click Add New button shown in Figure 4 54 to enter the Advanced Schedule Settings page 2 In Schedule Description field create a unique description for the schedule e g Schedule_1 lt 70 TL WR740N Wireless Lite N Router Lite N Router 3 In Day field check the Select Days radio button and then select Sat and Sun 4 In Time field enter 1800 in Start Time field and 2000 in Stop Time field 5 Click Save to complete the settings Then you will go back to the Schedule Setti
108. y Optional It is suggested to input the IP address of the LAN port of the Router The default value is 192 168 1 1 gt Default Domain Optional Input the domain name of your network gt Primary DNS Optional Input the DNS IP address provided by your ISP or consult your ISP gt Secondary DNS Optional Input the IP address of another DNS server if your ISP provides two DNS servers cs Note To use the DHCP server function of the Router you must configure all computers on the LAN as Obtain an IP Address automatically 4 7 2 DHCP Clients List Choose menu DHCP DHCP Clients List you can view the information about the clients attached to the Router in the screen as shown in Figure 4 27 DHCP Clients List ID Client Name MAC Address Assigned IP Lease Time user 00 19 66 30 53 BD 192 166 1 100 01 11 21 Figure 4 27 DHCP Clients List gt Client Name The name of the DHCP client gt MAC Address The MAC address of the DHCP client gt Assigned IP The IP address that the Router has allocated to the DHCP client 47 TL WR740N Wireless Lite N Router Lite N Router gt Lease Time The time of the DHCP client leased After the dynamic IP address has expired a new dynamic IP address will be automatically assigned to the user You cannot change any of the values on this page To update this page and to show the current attached devices click the Refresh button 4 7 3 Address

TP-LINK TL-WR740N Wi-Fi Ethernet LAN White router

Contents

Download Pdf Manuals

Related Search

Related Contents