Stardom 3.5" SATA Enclosure
Contents
1. Step2 Remove the Tray and install your hard disk onto the tray Make sure the hard disk secure screws are fastened to avoid unnecessary movements to the hard disk Step3 Once the hard disks have been installed insert the removable trays into appropriate positions of the SR3610 unit and close the handles to secure the disks Step4 Connect the cables included to the appropriate ports of the SR3610 and your PC system Step5 Turn on the power of the SR3610 Wait for the LCD display to show the OK message before turning on your PC system PRI HDD OK SEC HDD OK Installation Complete Your operation system will automatically identify the new hardware and once recognized follow the operating system s instructions to format the hard disks Once the formatting is complete the device is then ready for operation Contents Chapter 1 1 1 12 Chapter 2 21 22 2 3 Chapter 3 3 1 3 2 3 2 1 3 2 2 3 3 3 4 Product Outline 2000000000000eonenoenenoenoesennenersennenonennenenseneenersennenersene 7 WU OCUICHON nenne are T Functions and Fed O Gugsa ire naaa N a a S 8 Product Installation usneeeseseesenensesensenennenennesnnenennenennenenneneen 9 Packag COM 1 19 K PPRRENENPERABEENERENDRAEERTESPEESORFRIEPSENTERROEFESEFLUFRFESTDEBEERLER LEBE ERERUIEEREERERUEOER 9 Precautions and REQUIFEMENTS ccccccccccscccscsccccccccccccccccccscccccccccscccscccccccccsccees 10 Hardware NS LAN AUO Ns s2. Division Rebuild Speed Schedule Backup Setup RS 232 UPGRADE RAID System Upgrade Serial Port Address COM Baud Rate Run Cancel E Raid System1 Setting Hardware Monitor RAID MODE RAID 0 Division Rebuild Speed Schedule Backup Setup RS 232 UPGRADE RAID System Upgrade Serial Port Address Baud Rate En Cancel Restore Defaults Click Open Files button to locate then open the Firmware update file E Raid System1 Setting Hardware Monitor RAID MODE RAID 0 Division Rebuild Speed Schedule Backup Setup RS 232 UPGRADE RAID System Upgrade Serial Port Address COMI w Baud Rate 9600 vv Set BAUDRATE Cancel 16 Instructions Specify the correct Firmware update file and click Run then the system will begin updating firmware with the following message Verifying Address xxxx s Raid System1 Setting itor RAID MODE RAID 0 Division Rebuild Speed Schedule Backup Setup F m Upgrade When update is complete the system will show a message advising successful upgrade Instructions 17 Memo
3. PC system Step5 Turn on the power of the SR3610 Wait for the LCD display to show the OK message before turning on your PC system PRI HDD OK SEC HDD OK Installation Complete Your operation system will automatically identify the new hardware and once recognized follow the operating system s instructions to format the hard disks Once the formatting is complete the device is then ready for operation Product Installation 11 Chapter 3 Instructions 3 1 System Operating Procedure and Operation architecture The system operating procedure and operation architecture are as follow Default system password 0000 a FRI HOD OK PASSWORD SEG ADD OR 0000 POWER ON SCHEDULE BACKUP SETBACKUP TIME 4 ARE YOUSURE SCHEDULE BACKUP YES NO 0 gt 30 DAYS 00 YES NO me DAY 00 READY CHANGE RAIDMODE RAID O MODE DATA WILL LOSE RESET SYSTEM RAID O YES WO YES NO YES NO SETUP PASSWORD SETUP PASSWORD PASSWORD 1234 SETUP PASSWORD YES MO 1234 YES WO OR SYSTEM FAN2 3200 RPM SYSTEM FAN 3200 RPM SYSTEM TEMP oS hr 3 2 Changing RAID Level and Scheduling The SR3610 offers two RAID levels RAID 0 and RAID 1 You may choose the RAID level suitable for your needs The factory default is at RAID 1 A Note 1 Please backup all data on hard disks before changing RAID level 2 Changing the RAID level results in loss of all data on disks 3 2 1 Changing from RAID 1 to RAID 0 Mode Step 1 Log into the system then
4. the box you should find the following items SR3610 product unit includes two removable hard disk trays AC Power Cable RS232 Cable USB Cable included in the SR3610 2S B2 SR3610 2S SB2 and SR3610 2S WBC models eSATA Cable included in SR3610 2S SB2 only 1394B Cable included in SR3610 2S WBC only CD contains product specifications user manuals and management software User Manual Accessories Bag mi O 1394b cable SR3610 EJE eSATA cable H ee MN gt USB cable R Accessories bag RS232 cable Removable Tray Module Power cable Should any ofthe above accessories be missing or the main unit is damaged prior to initial use please contact your distributor or supplier Front View LCD Display Panel Select Buttons ESC Button Alarm LED Mute Button Enter Button Tray Handle Key Insertion Opening 9 Access LED Rear View SR3610 2S SB2 SR3610 2S B2 Defor tarag oF he power 3cm Fan 4cm Fan USB2 0 Port eSATA Port Power Switch RS232 Port Power Socket 1394b Port 2 Hardware Installation Please follow the steps below to complete installation of the SR3610 hardware Step 1 Place the device on a flat and stable surface Make sure the fan exhaust is not blocked and there is sufficient cooling space around the unit Please keep away from water sources or other hazardous environments that may damage the product
5. use W or A with the LCD display to scroll through the options until CHANGE RAIDMODE RAID O appears Default system password 0000 CHANGE RAIDMODE RAID O 12 Instructions Step2 Press the ENT button and the screen will show the message RAID O MODE YES NO Press the ENT button again to confirm RAID O MODE YES NO Step 3 System will show the warning DATA WILL LOSE YES NO To confirm loss of data is allowed press the ENT button DATA WILL LOSE YES NO Step4 System will show the message RESET SYSTEM YES NO Press the ENT button to confirm RESET SYSTEM YES NO Step 5 After confirming you will hear a Beep sound confirming that the system has been changed to the RAID mode as directed X To change from RAID 0 to RAID 1 mode at Step 1 go to the RAID 1 MODE YES N option before pressing the ENT button instead Follow the remaining steps to change the RAID mode 3 2 2 Schedule Backup Settings When the user uses RAID 1 mode for backups since both hard disks are being mirrored online at the same time the backup data may contain viruses To avoid this problem the Schedule Backup function provided by the SR3610 allows the user to define a backup interval of multiple days At the scheduled intervals the RAID will back up the data from the Primary Disk to the Secondary Disk This means the data in the disk array system does not have to be mirro
6. Features The STARDOM SR3610 series is a disk array system designed to provide users with the most cost effective solution for their storage needs It makes the swapping of hard disks easy while also guaranteeing data security and completeness 24 Hour Real Time Data Backup Using RAID1 all data in the main hard disk can be immediately mirrored onto another hard disk ensuring the complete backup of your data at all times Online Automatic Data Rebuild In RAID1 mode once a malfunctioning hard disk has been replaced the system will automatically rebuild the data to the new disk No extra settings required Custom Backup Schedule to Prevent Virus Infections The user can define their own schedule for data backups This may protect amp delay the backup disk from virus attacks that may have already infected the primary disk LCD Status Display The simple to use LCD display control panel makes the RAID and backup scheduling setups easy The fan and temperature information shown on the display also keeps users up to date on the system s status simplifying product management Plug and Play Support The removable tray design allows plug and play of hard disks at any time simplifying maintenance No Drivers Needed No additional drivers need to be installed The product is compatible with Windows Mac Linux operating systems Hot Swapping Support A malfunctioning hard disk can be replaced online without having to turn off the sys
7. SR3610 Series User Manual E gt N _ lt a Q an e N Version 1 0 Forewords About this manual Thank you for using products from Raidon Technology Inc This manual will introduce the STARDOM SR3610 Series product Before using STARDOM SR3610 Series you are advised to read this manual first All information contained in this manual has been carefully confirmed before printing but the actual product specifications shall be in accordance with those at the time of delivery any update to product specifications or relevant information may be found on www stardom com tw and no separate notification will be made If you have any query regarding the products of Raidon Technology or you would like the latest product information please contact us at techsupport stardom com tw and we shall give you a reply as soon as possible Note Raidon Technology will only provide technical support and services on products purchased directly from the company General consumers and third party buyers who did not purchase from the company should contact their distributor or supplier directly to receive faster support and response If you did not purchase products directly from our company please avoid contacting our company directly because your support and response may be delayed to your satisfaction Copyright RAIDON TECHNOLOGY INC All rights reserved SR3610 Series Quick Installation Guide 1 Package Contents After opening
8. erval length 2 Scheduled Backup does not store data from other hard disks to the RAID It only copies all data from the RAID s primary disk to the secondary disk 3 To cancel the Schedule Backup function set the days to 00 The system will revert to the RAID 1 mode 3 3 Change Password Setting To prevent unauthorized system settings the SR3610 incorporates a password feature to help administrators protect their data Be sure to record the new password somewhere safe after making a change Losing the password will cause a great inconvenience to the user Step 1 Log into the system then use W or A with the LCD display to scroll through the options until SETUP PASSWORD YES NO appears Default system password 0000 SETUP PASSWORD YES NO Step 2 After pressing the ENT button please use the Y or A buttons to adjust and set the 1st 2nd 3rd and 4th digit of the password SETUP PASSWORD 1234 14 Instructions Step 3 Once you have made the change please press the ENT button The following message will be shown PASSWORD XXXX YES NO PASSWORD 1234 YES NO Step 4 Please press the ENT button again The message SETUP PASSWORD OK will be shown indicating that you have successfully set a new password SETUP PASSWORD OK 3 4 Firmware Update You can update firmware through the RAIDGuide software via RS232 connection Insert the CD click on Manageme
9. in capacity than the source drive under the RAID1 model 2 Please ensure that the two hard disks used contain no bad tracks This avoids system crash or data loss in the event that one hard disk malfunctions 3 RAIDO mode offers improved data transfer performance and the full use of both hard disks as one large capacity disk It does not offer data mirroring however so if one hard disk is damaged all data will be lost 4 We recommend that you decide whether to use the product in RAIDO or RAID1 default value mode before it begins initial operation Changing the RAID mode at a later date will result in the complete loss of all data on the hard disks 2 3 Hardware Installation Please follow the steps below to complete installation of the SR3610 hardware Step 1 Place the device on a flat and stable surface Make sure the fan exhaust is not blocked and there is sufficient cooling space around the unit Please keep away from water sources or other hazardous environments that may damage the product Step2 Remove the Tray and install your hard disk onto the tray Make sure the hard disk secure screws are fastened to avoid unnecessary movements to the hard disk 10 Product Installation Step3 Once the hard disks have been installed insert the removable trays into appropriate positions of the SR3610 unit and close the handles to secure the disks Step4 Connect the cables included to the appropriate ports of the SR3610 and your
10. nt Software and then click RAIDGuide 1 28 1 14 to begin installation or open the RAIDGuide v1 28 1 14 file in the Management Software file and click setup exe to begin installation A Note 1 If your hardware is functioning normally it is recommended not to try and update the firmware to avoid any incompatibility from occurring which may result in data loss 2 When updating firmware becomes necessary please be sure to backup all information on the HDDs to avoid possible accident s during the update which may result in data loss Run RAIDGuide GUI and open the window select RAID System 1 Setting under Advanced in the tool bar above and the Setting window will appear Click the RS232 UPGRADE button The system will pop up the following window and prompt Do you want upgrade firmware click OK to start updating Firmware A RAIDGuide Manager Raid System1 Setting RAID Notification Notes Web Advanced Vindow Help Windows RAID 1 r RAID System 1 IT IX El Raid System1 Setting l Hardware Monitor RAID MODE RAID 0 Division Rebuild Speed Schedule Backup Setup RS 232 UPGRADE m i RAID System Upgrade UPGRADE Firmware e Db Do you want upgrade Firmware Restore Defaults EE RAIDON TECHNOLOGY INC Instructions 15 Select Serial port address COM1 and Baud Rate 9600 a Raid System1 Setting Hardware Monitor RAID MODE RAID 0
11. red constantly at all times This approach also saves system processing time making data backup more efficient and effective Instructions The user can specify a certain number of days 1 30 days and at the appropriate times the system will automatically back up the data Step 1 Log into the system then use W or A with the LCD display to scroll through the options until SCHEDULE BACKUP YES NO appears Default system password 0000 SCHEDULE BACKUP YES NO Instructions 13 Step2 After pressing the ENT button the display will show SCHEDULE BACKUP TIME 0 gt 30 DAYS 00 Use the W or A buttons to adjust to the number of days between backups Once the backup time has been set please press the ENT button SET BACKUP TIME 0 gt 30 DAYS 00 Step 3 System will now ask you to confirm the settings Press the ENT button to confirm ARE YOU SURE YES NO Step 4 The system will now show that the settings have been recorded SCHEDULE BACKUP DAY 00 READY If DAY is set to 00 then the device will operate in RAID 1 mode with constant mirroring at all times A Note 1 If Schedule Backup is used since hard disk data is not backed up simultaneously if a hard disk malfunctions then all new data since the last backup will be lost Before using this function we recommend that you consider carefully the use of RAID 1 Mode or Schedule Backup as well as the backup int
12. t5accduaaisasectesssiauduceecssisaucenesisisausanestasanusiaitoarensiadteaseaunaiees 10 IDSIEUCHONS nennen 12 System Operating Procedure and Operation architectUre soososssssssssssssssesso 12 Changing RAID Level and Scheduling sa0 0onnensesseneennonsosnonnnnsansesunnnoonnnnennnsnnen 12 Changing from RAID 1 to RAID 0 Mode ersesssssonnsnsssssseoonenssnnnnnsssssensnsnsnnnnnnerenee 12 Schedule Backup Sellngs au n naneeeuneennrs 13 Change Password Setting use eosesnssssonnenensenssennonsonnensensesesnnononnnessennonnnnnensnnseseee 14 FEMNE UPO Gessen A E E Ea 15 Chapter 1 Product Outline 1 1 Introduction The STARDOM SR3610 series provides users with a cost effective and safe external disk array sub system Whether you are using this product at home or in the office its RAID1 support and mirroring function provides you with real time data backup enhancing data security and stability RAIDO support is also included By optimizing the use of storage on two separate hard disks data transfer soeed enhances though there will be no data fault tolerance Front View LCD Display Panel Select Buttons ESC Button Alarm LED Mute Button Enter Button Tray Handle Key Insertion Opening Access LED Rear View SR3610 2S SB2 SR3610 2S B2 3cm Fan 4cm Fan USB2 0 Port eSATA Port Power Switch RS232 Port Power Socket 1394b Port Product Outline 7 1 2 Functions and
13. tem power GUI Monitoring Software The Product is provided with a Windows based RAIDGuide GUI software Using the RS232 port connection the user can monitor the disk array system s status at all times An e mail alert can be sent if the system malfunctions to ensure complete protection 8 Product Outline Chapter 2 Product Installation 2 1 Package Contents After opening the box you should find the following items SR3610 product unit includes two removable hard disk trays AC Power Cable RS232 Cable USB Cable included in the SR3610 2S B2 SR3610 2S SB2 and SR3610 2S WBC models eSATA Cable included in SR3610 2S SB2 only 1394B Cable included in SR3610 2S WBC only CD contains product specifications user manuals and management software User Manual Accessories Bag im E am 1394b cable u SR3610 eSATA cable CD Accessories bag Removable Tray Module Power cable Should any ofthe above accessories be missing or the main unit is damaged prior to initial use please contact your distributor or supplier Product Installation 9 2 2 Precautions and Requirements 1 The SR3610 can be used with two hard disks that are of different models and storage capacities initially However for improved performance we recommend that both disks should have the same specifications and capacity from the same manufacturer It is also necessary that the backup drive be the same or bigger
Download Pdf Manuals
Related Search