Home

Samsung SyncMaster 460UTn

Contents

1. gt 5 ENTER Digital NR Adjusting the LCD Display Move Enter Return F ENTER Turns the Digital Noise Reduction feature Off On The Digital Noise Reduction feature allows you to enjoy clearer and crisper images 1 Off 2 On Note Digital NR function is not availble for all resolutions Film Mode MENU gt ENTER 5 Picture gt Y ENTER ss Film Mode Move Enter Return amp Y ENTER The Film Mode feature offers you a theater quality viewing experience In HDMI mode this function can be available when the input signal is interlaced scan it cannot be available with progressive scan signal 1 Off 2 On Dynamic Contrast MENU gt ENTER Picture 5 5 gt t 5 5 ENTER gt Dynamic Contrast Move Enter Return Adjusting the LCD Display amp Y ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast 1 Off 2 On Brightness Sensor MENU 5 ENTER 5 Picture Y oyo 5 5 5 5 ENTER Brightness Sensor 4 ENTER Brightness Sensor automatically detects the distribution of inputted visual signal and adjusts to create an optimum brightness 1 2 Sound Off On Available Modes J PC DVI LJ Av CJ HDMI M Magiclnfo TV Note The TV menu is available when a T
2. Adjusting the LCD Display 4 ENTER Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed H Position MENU gt ENTER ss Picture gt t ENTER ss Image Lock ENTER H Position H Position a ENTER Adjusts the screen location horizontally V Position MENU 55 ENTER ss Picture sr ENTER ss Image Lock 5 ENTER Position V Position I mmm 4 ENTER Adjusts the screen location vertically Auto Adjustment MENU ENTER Picture gt F gt t ENTER gt Auto Adjustment Auto Adjustment mem 30 The values of Fine Coarse Position are adjusted automatically By changing the resolution in the control panel the auto function is performed Available in PC mode only a Note The direct button on the remote control is the AUTO button Signal Balance LJ This is used to make up for the weak RGB signal transmitted by a long signal cable MENU ENTER Picture 5s gt t gt t 5 ENTER gt Signal Balance Available in PC mode only Signal Balance MENU ENTER Picture 5 v gt gt Y gt Y gt Y 5 ENTER Signal Balance ENTER Signal Balance Adjusting the LCD Display Move Enter ORet
3. Otherwise this may result in damage to the product AV IN VIDEO VIDEO Connection Ter minal Connect the VIDEO terminal of your mon itor to the video output terminal of the exter nal device using a VIDEO cable AV AUDIO IN L AUDIO RI LCD Display Audio Connection Terminal Input AV AUDIO OUT L AUDIO R LCD Dis play Audio Connection Terminal Outout Introduction BNC COMPONENT OUT R PR G Y B FB H V BNC Component Connection Terminal Output BNC Analog PC Connection connecting the R G B H V ports Component Connection connecting the PR Y PB ports BNC COMPONENT IN R PR G Y B PB H V BNC Component Connection Terminal In put Q RGB OUT Applicable to the UTn model only G LAN LAN Connection Terminal Applicable to the UTn model only USB USB Connection Terminal Keyboard Mouse Mass Storage Device Compatible Applicable to the UTn model only Kensington Lock The Kensington Lock is a device used to physically fix the system when using itin a public place The locking device has to be purchased separately The appearance and locking method may differ from the illustra tion depending on the manufacturer Refer to the manual provided with the Kensington Lock for proper use The locking device has to be purchased separately Note The location of the Kensington Lock may be different depending on its m
4. Not available in Dynamic Contrast mode of On 1 Off 2 Cool2 3 4 Normal 5 Warm 6 Warm2 Note If you setthe Color Tone to Cool2 Cool1 Normal Warm1 or Warm2 the Color Temp function is disabled Adjusting the LCD Display Color Temp MENU gt gt ENTER ss Picture gt F ENTER Color Temp Color Temp C 10000 4 ENTER Color temp is a measure of the warmth of the image colors Not available in Dynamic Contrast mode of On Note This function is only enabled if the Color Tone is set to Off Size L3 MENU gt gt ENTER Picture ENTER Size amp ENTER The Size can be switched 1 16 9 Sets the picture to 16 9 wide mode 2 Zoom 1 Magnifies the size of the picture on the screen 3 Zoom 2 Magnifies the size of the picture more than Zoom 1 4 4 3 Sets the picture to 4 3 normal mode 5 Just Scan Displays the input scenes as they are without any cutoff when HDMI 720p 10801 1080p signals are input Not available in Dynamic Contrast mode of On Note Certain external devices may feed the display an out of spec signal that may cause cutoff even when using the Just Scan feature Zoom 1 Zoom 2 will be unavailabel in HDMI mode Note The Position and Reset functions are available when Zoom 1 or Zoom 2 is run Digital NR Digital Noise Reduction MENU 5 Ts ENTER ss Picture
5. kha cone dies is gelecied baliw Specs the deve net you ward 1m maba Rer thig handwanr wm CT Cancel Tani siropi IL Ld ILLE NL LII LB D dbz LLLI LEN I Ll Aa Gaman Fe Marin 9 Selectthe model that matches your monitor from the list of monitor models on the screen and click Next Seki the dice driver you viai Vo es thia A Ta pa Sirahe ird ket piar Pani desc ans Pur Puma Peg paa Pd a Paa o E Mr Samsung sna Wr Damang ees Ask haa subo Ad uplod your deer sofware A ewe sunm it in pln ieri Fin Te deve I Tel liae adi ee age faece audi tech Du fh pA muss Ir Mone Type Menor Screen refresh raba 50 Hertz pide modes that the monitor cannot display Clearing thi check box alpa yeu in select dapiry modes that this mont cannot display correctly This may leid te an unable T Thus i5 my mH maoritor the desktop onto that montor Microsoft Windows XP Operating System Using the Software 1 Insert CD into the CD ROM drive 2 Click Start Control Panel then click the Appearance and Themes icon Erter inimene glue w emai Suit look HET Mokapad W Paint C Mindoro Podio Misayo HEH LOW Yana Poesias Palag FE rage cnm E 3 domni T
6. Note Problems related to the LCD Display screen and their solutions are listed Q A gt gt O gt o gt O 5 5 F O The screen is blank and the power indicator is off Ensure that the power cord is firmly connected and the LCD Display is on Refer to the Connecting a Computer Check Signal Cable message Ensure that the signal cable is firmly connected to the PC or video sources Refer to the Connecting a Computer Ensure that the PC or video sources are turned on Not Optimum Mode message Check the maximum resolution and the frequency of the video Adaptor Compare these values with the data in the Preset Timing Modes Chart The picture rolls vertically Check if the signal cable is securely connected Re connect it if necessary Refer to Connecting a Computer The image is not clear picture is blurred Run Frequency Coarse and Fine tuning Turn on again after removing all accessories video extension cable etc Set the resolution and frequency to the recommended ranges The picture image is unstable and shakes Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes Ghost images are shown in the picture Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Displ
7. TRINIDAD 8 TO BAGO VENEZUELA AUSTRIA North America 1 800 SAMSUNG 726 7864 http www samsung com us 1 800 SAMSUNG 726 7864 http www samsung com ca 01 800 SAMSUNG 726 7864 Latin America 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 7919267 1 800 234 7267 00 1800 5077267 800 7267 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Europe 0810 SAMSUNG 7267864 E 0 07 min http www samsung com mx http www samsung com ar http www samsung com br http www samsung com cl http www samsung com co http www samsung com lat in http www samsung com lat in http www samsung com lat In http www samsung com lat In http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com lat in http www samsung com at BELGIUM CZECH REPUBLIC 800 DENMARK EIRE FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN SWITZERLAND U K ESTONIA LATVIA LITHUANIA KAZAKHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN Appendix Europe 02 201 2418 http www samsung com be Du
8. v Tt ENTER gt Safety Screen ENTER Timer ENTER Time 4 ENTER Within the set period of time specify a time for execution e Mode Scroll 1 5 sec e Mode Bar Eraser 10 50 sec Scroll Bar Eraser Adjusting the LCD Display MENU 5 5 ENTER Setup yo t gt gt v 5 t ENTER gt Safety Screen ENTER Scroll This function prevents after images on the screen by moving all the pixels on the LCD ac cording to a pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time MENU gt 5 ENTER Setup v gt gt vo yo ENTER gt Safety Screen SENTER Bar Pixel Shift Time Scroll Eraser This function prevents after images on the screen by moving long black and white vertical lines MENU gt ENTER Setup gt gt S 5v v gt ENTER Safety Screen SENTER Eraser This function prevents after images on the screen by moving a rectangular pattern Resolution Select LJ MENU gt gt ENTER Setup gt Y gt gt gt T 5 ENTER Resolution Select Adjusting the LCD Display v 1280 x 768 i360x768 F ENTER When the picture is not displayed properl
9. 1 If the Properties button is inactive it means your monitor is properly configured Please stop installation Case2 If the Properties button is active click the Properties button then follow next steps continually 5 Click Driver and then click on Update Driver then click on the Next button 6 Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk 7 Click the Browse button then choose A D Driver 8 Click the Open button then click OK button 9 Choose your monitor model and click the Next button then click Next button 10 Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button Microsoft Windows Millennium Operating System 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button Using the Software 4 Select the Monitor tab 5 Click the Change button in the Monitor Type area 6 Choose Specify the location of the driver 7 Choose Display a list of all the driver in a specific location then click Next button 8 Click the Have Disk button 9 Specify A D driver then click OK button 10 Select Show all devices and choose the monitor that corre
10. 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness for the selected display 4 Red Adjusts red Color of the selected display Available only for NT 5 Green Adjusts green Color of the selected display Available only for NT 6 Blue Adjusts blue Color of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model Color Temp is only enabled if the Color Tone is set to Off This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed T Ung Settings Audio 1 Click Settings of the main icons and the Settings Control screen appears i tip Display Contral File Remocon Safety Lock Port Selection Help SetectAll Clear Att All Inputs Bass 60 l m Se Main Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen
11. Audio Type MTS S Mode Default FM Stereo Mono Mono Manual Stereo Mono e Stereo Change SAP Mono lt gt SAP Mono 30 P P Every time you press the button a PIP screen appears This fuction does not work for this LCD Display 31 SWAP Swaps the contents of the PIP and main image The image in the PIP window will appear on the main screen and the main screen image will appear in the PIP window This fuction does not work for this LCD Display Where and How to assemble the bracket panel Unpacking Bracket Panel Bracket Panel Bracket Panel Bracket Panel screw FH top Bottom L R 4 10 16EA Introduction Assembling the bracket panel Before mounting the set s outer cover after installing a Video Wall or Samsung UD remove the stickers attached to the connecting screw holes first Note Do not remove the stickers if you are not going to assemble the bracket panel Mechanical Layout 460UT 460UTn Mechanical Layout LCD Display Head Introduction 500 0 500 0 Installation VESA Bracket When installing VESA make sure to comply with the international VESA standards Purchasing VESA Bracket and Installation Information Please contact your nearest SAMSUNG Distributor to place an order After your order is placed installation profes sionals will visit you and install the bracket At least 2 persons are needed in order to move the LCD Display SAMSUNG is not responsible for any product damage o
12. ENTER gt Safety Screen 5 ENTER Pixel Shift yy ENTER Vertical Line 5 4 ENTER Sets how many pixels the screen moves vertically Five adjustment levels O 1 2 3 and 4 Time MENU gt gt ENTER Setup yow ows gt ENTER gt Safety Screen ENTER Pixel Shift 4 ENTER Time 4 ENTER min Set the time interval for performing the horizontal or vertical movement respectively Timer Timer MENU gt ENTER Setup syo Yo gt 5v v5 7 5 ENTER gt Safety Screen ENTER Timer ENTER Timer 4 ENTER You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish 1 Off Adjusting the LCD Display Mode MENU gt ENTER Setup 5 gt v 5 5v ENTER gt Safety Screen ENTER Timer _ ENTER 4 ENTER You can change the Safety Screen Type 1 Scroll 2 Bar 3 Eraser Period MENU gt 5 5 ENTER Setup 5 5 Y v v ENTER gt Safety Screen ENTER Timer ENTER Period 4 ENTER Use this function to set the execution period for each mode set in the timer Time MENU gt 5 5 ENTER Setup 5 5 Y
13. Flug amail Play Monitor Pio pee 115 ad Coheed Phag and Pap Monitor Dawa Mera ees Mara solace headend maawat Ip Location on 3D Fiap Pais Thus cheeses is pinger nyay ann hasang problems path Iha dees chick Ticubleshoot l mhal Hhas Device iha raa Welcome to the Hardware Update Wizard Tiia helen pou solve bor Plug and Play Morac 9 M pour hadassa come with an installation CD a9 or disk insert nom hat de pou vani Hes wid bo do nal fee automatically Recorded Gr mts bam lest ca locaton Povanced ck bo continue Select Don t search will then click Next and then click Have disk Using the Software Hardware Update Wizard Fieste chorta yo poach and incl alain nplsons C Besch bos the beat dered in Paas locate hardware Update Wizard Bakal the dovide chives pou wan ba install los this a Soke the rra asctarer are radal of pour haka dessa and hen click Nasi H you hasa dak that ponian the dresser you vent Ho lal cci Duk Line tha chak basa baka ka rni ca pard the ded slt teach vobach include cal pathi and semana maa T hes Deci dmo bound wal be natales reves gormpaibla Faederand Mi costed Pag and Page Honto S Dont 1 yall chesse the drva bo ima Chose the
14. Safety Instructions Notational Power Note These safety instructions must be followed to ensure your safety and prevent property dam age Make sure to read the instructions carefully and use the product in the correct manner D Warning Caution Failure to follow directions noted by this symbol could result in bodily F harm or damage to the equipment Notational Conventions Important to read and under Prohibited stand at all times Disconnect the plug from the outlet ad Do not disassemble Ground to prevent an electric Do not touch shock eoo 4 When not used for extended period of time set your computer to DPM If using screen saver set it to active screen mode The images here are for reference only and are not applicable in all cases or countries Shortcut to Anti Afterimage Instructions L3 Do not use a damaged power cord or plug or a damaged or loose power outlet Otherwise this may result in electric shock or fire not touch the power plug with wet hands when removing td plugging the plug into the outlet ka Otherwise this may result in electric shock L3 Make sure to connect the power cord to a grounded power out let Otherwise it may result in electric shock or personal injury Installation Safety Instructions L3 Ensure that the power plug is plugged into the power outlet firmly and correctly Otherwise this may result in
15. gt 4 ENTER Size LJ MENU 5 gt ENTER Picture 5 pos gt gt f gt gt v5 v5 ENTER gt Size amp Y ENTER The Size can be switched 1 16 9 2 4 3 Dynamic Contrast LIT MENU gt ENTER Picture 5 yo yo gt f 5v v v v ENTER gt Dynamic Contrast Move Enter Retum amp Y ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast Adjusting the LCD Display 1 Off 2 On Brightness Sensor LI MENU 7 gt ENTER Picture gt gt gt gt ENTER Brightness Sensor 4 ENTER Brightness Sensor automatically detects the distribution of inputted visual signal and adjusts to create an optimum brightness 1 Off 2 On Picture AV HDMI TV Mode Available Modes JPC DVI gt Eav HDMI 5 Magicinfo TV Note The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box Mode Li 8I MENU 7 5 ENTER Picture ENTER Mode Dynamic WEEE Movie Custom ENTER The LCD Display has four automatic picture settings Standard Movie and Custom that are preset at the factory Adjusting the LCD Display Dynamic Standard Movie or Custom can be activated Not available in Dynamic Contrast
16. Maintenance NU Lamp Control 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen 3 Multiple Display Control File Remocon Safety Lock Port Selection Select AI Chear All Lamp Control 2 Auto Lamp Control na ETO ww NG Apply O Manual Lamp Control An Info Grid showing several basic data items appears 1 Maintenance Allows the Maintenance Control function for all input sources 2 Auto Lamp Control Automatically adjusts the backlight of the selected display at a specified time The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control 3 Manual Lamp Control Allows you to adjust the backlight of the selected display regardless of the time The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control The Maintenance Control feature is available only for the displays whose power status is ON The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model Maintenance NU Scroll 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen aa Multiple Display Control File Remocon Safety Lock Port Selection Help Select All Chear All Still 1 Safety Screen on E Second Type nterwal Apply 1 Safety Screen Eliminates the afterimages that can res
17. Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods Remote Control Sensor Aim the remote control towards this spot on the LCD Display Rear Note For detailed information concerning cable connections refer to Connecting Cables under Setup The LCD Display s configuration at the back may vary slightly depending on the LCD Display model O POWER S W OFF O Switches the LCD Display On Off o POWER IN The power cord plugs into the LCD Display and the wall plug Introduction RS232C OUT IN RS232C Serial PORT MDC Multiple Display Control Program Port DVI PC HDMI IN DV PC HDM AU DIO IN PC DVI HDMI Audio Connection Terminal Input DVI PC HDMI IN HDMI Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI ca ble Q DVI PC HDMI IN RGB PC Video Connection Terminal Using a D Sub Cable 15 pin D Sub PC mode Analog PC 9 DVI PC HDMI IN DVI PC Video Con nection Terminal Using a DVI Cable DVI D to DVI D DVI mode Digital PC DC OUT Make sure to use connecting DC OUT ter minal to the authorized TV Tuner Box SBB DT
18. such as Q cookies etc that may attract the attention of children and to the product e Your children may hang onto the product causing it to fall and this may result in personal injury or death L3 Be careful that children do not place the battery in their mouths Da when removed from the remote control Place the battery in a lo Ag cation that children or infants cannot reach e f children have had the battery in their mouths consult your doctor immediately L3 When replacing the battery insert it with right polarity e Otherwise the battery may become damaged may cause kb fire personal injury or damage due to leakage of the internal liquid JUse only the specified standardized batteries and do not use a VIT fj new battery and a used battery at the same time j Otherwise the batteries may be damaged or cause fire per sonal injury or damage due to a leakage of the internal liquid Safety Instructions L3The batteries and rechargeable batteries are not ordinary re _ fuse and must be returned for recycling purposes The customer is responsible for returning the used or rechargeable batteries for Q recycling e The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery _ 2 Do not place the product in a location exposed to direct sunlight or
19. the Auto Adjustment Image Lock and Size functions are not available Video Wall does not operate in Magiclnfo mode Video Wall Format MENU gt v gt gt o ENTER Setup yo gt ENTER Video Wall ENTER video Yall amp Y ENTER Turns Off On the Video Wall function of the selected display Off On 1 Off 2 On MENU v ox ENTER Setup v5 v5 t gt 7 ENTER Video Wall ENTER Format amp Y ENTER The Format can be selected to see a divided screen 1 Full Provides a full screen without any margins 2 Natural Displays a natural image with the original aspect ratio intact Horizontal MENU v x x ENTER Setup 5 5 gt F gt Video Wall gt 5 ENTER Horizontal Adjusting the LCD Display sk 1 5 ENTER Sets how many parts the screen should be divided horizontally Five adjustment levels 1 2 3 4 and 5 Vertical MENU v 5 gt gt ENTER Setup 5 v5 gt ENTER Video Wall ENTER Vertical Move 92 Retum 1 5 ENTER Sets how many parts the screen should be divided vertically Five adjustment levels 1 2 3 4 and 5 Screen Divider MENU gt v ox ENTER Setup v5 v5 Y 5 5 5 9 ENTER Video Wall gt Y gt F Y ENTER Screen Divider The screen can be divided into several images A nu
20. Display does not support over 85Hz Not Optimum Mode Recommended Mode KX Refer to Specifications gt Preset Timing Modes for the resolutions or frequencies supported by the LCD Display Maintenance and Cleaning 1 Maintaining the LCD Display Case Clean with a soft cloth after disconnecting the power cord Troubleshooting Do not use benzene thinner or other flammable sub stances or a wet cloth if e We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen 2 Maintaining the Flat Panel Display Screen Clean with a soft cloth cotton flannel smoothly e Never use acetone benzene or thinner They may cause flaws or deformation of the screen MYA surface The user will be required to pay costs and related expenses for repairing damages caused Symptoms and Recommended Actions Note A LCD Display recreates visual signals received from the computer Therefore if there is a problem with the computer or the video card this can cause the LCD Display to become blank have poor coloring become noisy and video mode not supported etc In this case first check the source of the problem and then contact a Service Center or your dealer 1 Check if the power cord and the video cables are properly connected to the computer 2 Check if the computer beeps more than 3 times when booting If it does request an a service for the main bo
21. File Remocon Safety Lock Port Selection SelectAll Clear All Current Time 1 05 23 On Time Setup O Ng ar Hour Minute Info Grid shows some basic information necessary to Time Control 1 Current Time Set the current time for the selected display PC Time To change the current time first change the PC Time 2 On Time Setup Set the Hour Minute AM PM of On Time Setup Status Source Volume of the selected display 3 Off Time Setup Set the Hour Minute and AM PM Status for Off Time Setup of the selected display 4 Shows the On Time settings 5 Shows the Off Time settings The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model Time Control is available only for the displays for which the power status is ON At On Time Setup TV Source functions only for TV Model At On Time Setup MagicInfo Source functions only for MagicInfo Model lk PIP PIP Size 1 Click PIP of the main icons and the PIP control screen appears Click Select All or use Check Box to select a display to control lim Multiple Display Cont Safety Lock Port Selection Select Al Clear All Ye Info Grid shows some basic information necessary to PIP Size Control 1 PIP Size Shows the current PIP Size of the display in use 2 OFF Turns off the PIP of the selected display 3 Large Turns on the PIP of the selected display and changes the size to Larg
22. LCD Display except for the Power and LOCK buttons Press the button to change the input signal SOURCE Changing the SOURCE is only allowed for external devices that are connected to the monitor at the time This button is used to return to the immediately previous channel In TV mode selects TV channels DTV menu display Electronic Program Guide EPG display Returns to the previous menu Moves from one menu item to another horizontally vertically or adjusts selected menu values Exits from the menu screen SRS TS XT Magiclnfo Quick Launch Button When you press this button current picture mode is dis played on the lower center of the screen AV HDMI TV P MODE The LCD Display has four automatic picture settings that are preset at the factory Then push button again to circle through available preconfigured modes Dynamic Standard Movie Custom PC DVI Magiclnfo M B MagicBright MagicBright is a feature providing the optimum viewing en vironment depending on the contents of the image you are watching Then push button again to circle through available preconfigured modes Entertain Internet Text Cus tom DUAL SIT EREO MONO DUAL DUAL Il and MONO NICAM MONO NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV Introduction MTS You can select MTS Multichannel Television Stereo mode
23. and other Euro pean countries with separate battery return sys tems This marking on the battery manual or packaging in dicates that the batteries in this product should not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery con tains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free bat tery return system Note The rechargeable battery incorporated in this product is not user replaceable For information on its replacement please contact your service provider Authority Information in this document is subject to change without notice 2009 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Elec tronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this ma terial Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks
24. be inserted appears Move the cursor over the icon Note If the Magiclnfo icon is not displayed on the notification area double click the Magiclnfo icon on the window desktop The icon will appear Troubleshooting Self Test Feature Check Note Check the following items yourself before calling for assistance Contact a Service Center for problems that you cannot solve by yourself Self Test Feature Check 1 Turn off both your computer and the LCD Display 2 Unplug the video cable from the back of the computer 3 Turn on the LCD Display The figure shown below Check Signal Cable appears on a black background when the LCD Display is working normally even though no video signal is detected While in the Self Test mode the LED power indicator remains green and the figure moves around on the screen 7 Check Signal Cable PC 4 Turn off your LCD Display and reconnect the video cable then turn on both your com puter and the LCD Display If your LCD Display screen remains blank after using the previous procedure check your video controller and computer system your LCD Display is functioning properly Warning Messages You can even view the screen at a resolution of 1366 x 768 However you will receive the following message for a minute You can choose to change the screen resolution or stay in the current mode during that time And if the resolution is more than 85Hz you will see the black screen because the LCD
25. comecty This mary leid 5a usable Japar andir Caraga hrga p Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage Click Update Driver in the Driver tab a eee SET Mg Manufacture essor Kapa Locator aa PACA Gere LE iaaa Capas Deno Fi aiana a iare prog Ta Gat nin Sa Sia ba To updsis Ea diam ppan Hor a naga fra drvca tah er dara rd bak bo ak piy rale He fas minded dioa T uriraiall Fa deser Ara Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer E X 1 ia Hic viu van 20 sedqich dog dereer pee Eryap for Grea uofrwang pn yr COSTI Tamang Paw deen carin anm s Pas moa Far des deer ferire Tirage aud pee Boye eee eee eed Poe Ger LA eo eee dim der deletam Lgs np d al eat ee aa o Lan erap a of dee Grier on ny ccengpurter Tika kd onc ard fern url aant paba ani Che abren r aral al cm uaga an ar ey gn wem iroa Click Have Disk and select the folder for example D Drive where the driver setup file is located and click OK Using the Software i mga
26. enter the frequency directly 9 Enter the model name of your monitor This information will not affect the actual execution of X Window Using the Software 10 You have finished setting up your monitor Execute X Window after setting other re quested hardware WhiteBalance The WhiteBalance program supplied with this product operates in the X Rite Eye One Display 2 device which should be purchased additionally by the user when needed The WhiteBalance program supplied with this product allows the user to adjust the White Balance value of this product to a desired value The WhiteBalance program cannot be run simultaneously with the Magiclnfo client or in du plication e The WhiteBalance program cannot be run if no Eye One Display is connected e After Connecting Eye One Display Device the Eye One USB driver has to be installed to make device ready to use The required driver is available in Eye One Display support CD Folder Name in CD Eye One USB Driver and it is also available in UTn LFD at D WhiteBalance e The Calibration Mode Magiclnfo is supported in UTn LFD Executing WhiteBalance application on LFD itself The Calibration Result files will be saved in UTn LFD at D WhiteBalance The Calibration Mode PC DVI is supported in UT UTn Executing WhiteBalance on external PC and using LFD as Monitor The Calibration Result files will be saved in external PC at System32 WhiteBalance In this case Exter
27. near any heat such as fire heater This may reduce the lifetime of the product and may result in fire Do not drop any objects onto the product or cause any impact paa to the product Otherwise this may result in electric shock or fire L3 Do not use a humidifier or kitchen table near the product e Otherwise this may result in electric shock or fire L3 When there is a gas leak do not touch the product or the power plug but ventilate immediately spark occurs it may cause an explosion or fire If the product has been turned on for a long time the display panel becomes hot Do not touch it o L3Keep the small accessories in a location out of the reach of chil dren Y Y ow L3 Be careful when adjusting the angle of the product or the height of the stand e This may result in personal injury as your hand or fingers may become caught e Also if you tilt the product too far it may fall and cause personal injury L3 Do not install the product a location low enough for children a to reach Otherwise it may fall and result in personal injury e Since the front part of the product is heavy install the product on a level and stable surface Safety Instructions of L3 Do not put any heavy objects on the product his may result in personal injury and or damage to the prod uct MM Introduction Package Contents Note
28. of Microsoft Corporation VESA DPM and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA All other product names mentioned herein may be the trademarks or registered trade marks of their respective owners SRS TruSurround XT SRS and Symbol are trademarks of SRS Labs Inc TruSurround XT technology is incorporated under license from SRS Labs Inc CALIFORNIA USA ONLY Applicable for networking models only This Perchlorate warning applies only to primary CR Manganese Dioxide Lithium coin cells in the product sold or distributed ONLY in California USA Perchloate Material special handling may apply See www dtsc ca govfhazardouswaste perchlorate
29. off the remote Function disconnect the RS 232C cable or exit the program in an Irregular manner Rerun the program and turn the remote function again to Restore normal functions lt Note gt This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby Please make selection in the example information qrid before controlling MI ID 1 Settings Value Display In Multiple Display Mode When there are more than one displays connected the settings values are displayed as follows 1 No selection Displays the Factory Default Value 2 Selected one display Fetches and displays the settings value for the selected display 3 Selected one display ID1 and add another display ID3 The program which was displaying the settings value of ID 1 fetches and displays the value of ID3 4 Selected all sets using Select All Returns to the Factory Default Value Copyright 2003 2008 Samsung Electronics Co Ltd All rights reserved Adjusting the LCD Display Input Available Modes CJ PC DVI EJ HDMI M Magiclnfo i TV Note The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box Source List MENU s5 ENTER Input ENTER Source List HDMI Magicinfa amp ENTER Use to select PC DVI or other external input sources connected to the LCD Displ
30. port of the LCD Display 2 Then start the DVD VCR or Camcorders with a DVD disc or tape inserted Connections 3 Select AV using the SOURCE Note The LCD Display has AV connection terminals to connect AV input devices like DVDs VCRs or Camcorders You may enjoy AV signals as long as the LCD Display is turned on Connecting to a Camcorder 1 Locate the AV output jacks on the camcorder They are usually found on the side or back of the camcorder Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN L AUDIO R on the LCD Display 2 Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN VIDEO on the LCD Display 3 Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control 4 Then start the Camcorders with a tape inserted Note The audio video cables shown here are usually included with a Camcorder If not check your local electronics store If your camcorder is stereo you need to connect a set of two cables Connecting a DVD Player dlr e 00000 o Connections 1 Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Dis play and the AUDIO OUT jacks on the DVD player 2 Connect a Component cable between the BNC COMPONENT IN Pg Y Pg port on the LCD Display and the Pg Y Pg jacks on the DVD pl
31. some of the 4screws on the wall bracket to adjust the length A Length between the two locking holes Check the installation diagram and mark the drill points on the wall Use the 5 0 mm bit to drill holes deeper than 35 mm Fix each anchor in the corresponding hole Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A Introduction lgi uet 7 2 pd PA M Vie co A cor AY Le E a x EM v we Gr Na r2 nf q o er To mount the product on the wall bracket The shape of the product may vary depending on the model The assemblies of the plastic hanger and the screw are the same 1 Remove the 4 screws on the back of the product 2 Insert the screw B into the plastic hanger i df Notice e Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers e Be careful when installing the product on the bracket as fingers can be caught in the holes Make sure the wall bracket is securely fixed to the wall or the product may not stay in place after installation 3 Tighten the 4 screws in step 2 plastic hanger screw B to the rear holes of the product Introduction 4 Remove safety pin 3 and insert the 4 product holders into the corresponding bracket holes 1 Then place the product 2 so that it is firmly fixed to the bracket Mak
32. the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Audio Controls audio settings for all input sources 2 Bass Adjusts Bass of the selected display 3 Treble Adjusts Treble of the selected display 4 Balance Adjusts Balance of the selected display 5 SRS TS XT SRS TS XT Sound ON OFF of the selected display 6 Sound Select Select either Main or Sub when PIP is On The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Re 7 Settings Image Lock 1 Click Settings of the main icons and the Settings Control screen appears Multiple Display Cont Safety Lock Port Selection Help Select Alt Clear Al Auto Adjustment Info Grid shows some basic information necessary to Settings Control 1 Image Lock Available only for PC BNC 2 Coarse Adjusts Coarse of the selected display 3 Fine Adjusts Fine of the selected display 4 Position Adjusts Position of the selected display 5 Auto Adjustment Self Adjust to the incoming PC signal The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model Settings Control is available only for the displays for which the power status is ON _ lt
33. 68 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 768 47 776 59 870 79 500 Specifications Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz VESA 1280 X 960 60 000 60 000 108 000 VESA 1280 X 1024 63 981 60 020 108 000 VESA 1280 X 1024 79 976 75 025 135 000 VESA 1360 x 768 47 712 60 015 85 500 VESA 1366 x 768 47 712 59 790 85 500 VESA 1600 x 1200 75 000 60 000 162 000 VESA 1920 x 1080 66 587 59 934 138 500 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor izontal Cycle is called the Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called the Vertical Frequency or Refresh Rate Unit Hz Information For Better Display Adjust the computer resolution and screen injection rate refresh rate on the computer as described below to enjoy the best picture quality You can have an uneven picture quality on screen if the best picture quality is not provided for TFT LCD e Resolution 1366 x 768 e Vertical frequency refresh rate 60 Hz TFT LCD panels manufactured by using
34. Adjusts the sound balance between the left and right speakers Auto Volume 1 1 1788 MENU gt ENTER Sound ENTER Auto Volume amp Y ENTER Reduces the difference in volume control between broadcasters 1 Off 2 On SRS TS XT MENU ENTER Sound ENTER SRS TS XT amp Y ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5 1 multichannel content over two speakers TruSurround delivers a compelling virtual surround sound ex perience through any two speaker playback system including internal television speakers It is fully compatible with all multichannel formats 1 Off 2 On Note The direct button on the remote control is the SRS button Adjusting the LCD Display Setup Available Modes DPC DVI Eav CHDMI M Magiclnfo Tv 7 Note he TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box Language 1 3 781 MENU gt T gt T gt Y ENTER Setup ENTER Language Espa ol Fran ais Italiane Svenska amp Y ENTER You can choose one of 13 languages English Deutsch Espa ol Fran ais Italiano Svenska Portugu s T rk e 5j prp Sadr AAG 20 Note The language chosen affects only the language of the OSD It has no effect on any software running on the c
35. Eh EF fee Ba Ge E Pe Deu ars ae la ye Berma Dna namana k gt iy Biko a E Pere Pasi i 8 m E wt 1 iz T Ari Fae eo 2 mep and suport EF Bum Click Display icon and choose the Q d se Chan TT T aer a ikr fa dient Lco ign rM ET F Nara rei or pick Control Panel icon 4 ZA Gel ace General Adapter mi Pag and Pisy Monitor Pigre ceils Saan aeteech nata ED Hautz CI Hide micas that this moral daplay Clang thes Check bia qus Menara may kad bo an canas nam der damagod Ha 5 an EF hab ya Taa Te aerar ria aab aTe a Pa kag La ira i 1o seleck display modes iab this cheplay DP lay Monitor Proper ties Genma 9 Dares Prada Dies Drake Duis fied cen Digtal Sigrar Pack Drem Lire Pag ard Play Kl ld craft GASO 512001 0 Micro mo H To vue aiai Uus hia To lya aa kaa Hos das dayi a If ihe deag lade alter upahan Hs dies rol Bk bo Iho giamh mbaba inie To uwemo ie hrm jjo Lok p TP amis ml ain ma Paii Settings tab then click Advanced Grka pasy Higham 127 Ext 5 DONE se
36. NTER MENU gt ENTER Picture 5 x 5x ENTER Color Control 5 x ENTER Green Blue Adjusting the LCD Display Green 4 ENTER MENU gt ENTER Picture ENTER Color Control ENTER Blue Biue io 4 LE 4 ENTER Color Temp GAX MENU gt gt ENTER ss Picture gt F ENTER Color Temp Color Temp E G 4 ENTER Color Temp is a measure of the warmth of the image colors Not available in Dynamic Contrast mode of On Note This function is only enabled if the Color Tone is set to Off Image Lock LJ Coarse Fine Image Lock is used to fine tune and get the best image by removing noise that creates un stable images with jitters and shakiness If satisfactory results are not obtained using the Fine adjustment use the Coarse adjustment and then use Fine again Available in PC mode only MENU ENTER Picture 5 ENTER Image Lock MENU gt ENTER Picture gt F gt t ENTER Image Lock Coarse E 1792 i 4 ENTER Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu MENU gt 7 ENTER Picture gt Y ENTER Image Lock ENTER Fine Fine
37. Please make sure the following items are included with your LCD Display If any items are missing contact your dealer Contact a local dealer to buy optional items Note This stand is not for the Floor Standing Type Unpacking LCD Display Manuals TFI y o Quick Setup Guide Warranty Card User s Guide Not available in all loca tions Magiclnfo Software CD Magiclnfo Manual CD Applicable to the UTn mod el only Cables Power Cord Others ceo oe oS a 6862 oe Ferrite Core for LAN cable Remote Control Batteries AAA X 2 Introduction Others Not available in all loca Applicable to the UTn tions model only BNC to RCA Adaptor Jack Sold separately DVI Cable Wall Mount KIT LAN Cable Applicable to the UTn model only a F a t NetWork Box TV tuner box BNC Cable Applicable to the UT mod el only Calibrater Bracket Panel Semi Stand KIT For more information on Bracket Panel 4EA the use of the calibrater screw 16EA see Natural Color Expert Help Refer to Where and How to assemble the bracket panel D Sub Cable Note You can purchase and connect a separate network box or TV tuner box For information on how to use these refer to their respective user manuals You can only connect one external box Ferrite Core e The ferrite cores are used to shield the cables from interfer ence When connecting a cable open the f
38. Refer to the Windows Computer Manual Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function the BIOS SET UP of the computer Refer to the Windows Computer Manual How can clean the outer case LCD Panel Troubleshooting A Disconnect the power cord and then clean the LCD Display with a soft cloth using either a cleaning solution or plain water Do not leave any detergent or scratches on the case Do not let any water enter the LCD Display How can play the video The video supports the MPEG1 and WMV codecs only Install the corresponding codec to play the video Note that some of the codecs can be incompatible E Note Before calling for assistance check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the In formation section or contact your dealer Specifications General General Model Name SyncMaster 460UT SyncMaster 460UTn LCD Panel Size 46 Diagonal 116 cm Display area 1018 353 mm H x 572 544 mm V Pixel Pitch 0 2485 mm x 0 7455 mm V Synchronization Horizontal 30 81 kHz Vertical 56 85 HZ Display Color 16 7 M Resolution Optimum resolution 1366 x 768 60 Hz Maximum resolution 1920 x 1080 60Hz Input Signal Terminated RGB Analog DVI Digital Visual Interface Compliant Digital RGB 0 7 Vp p 5 Separate H V sync Composite SOG TTL
39. V tuner box is installed UT model can use Magiclnfo menu when mounted Network box Mode 12 1 LR MENU gt gt 5 ENTER Sound ENTER Mode Adjusting the LCD Display amp 1 5 ENTER The LCD Display has a built in high fidelity stereo amplifier 1 Standard Selects Standard for the standard factory settings 2 Music Selects Music when watching music videos or concerts 3 Movie Selects Movie when viewing movies 4 Speech Selects Speech when watching a show that is mostly dialogue i e news 5 Custom Selects Custom if you want to adjust the settings according to your personal preferences Custom L4 Li The sound settings can be adjusted to suit your personal preferences MENU gt ENTER Sound ENTER Custom Note e You can hear the sound even when sound value is set to e f you adjust sound using Custom function Mode will turn to Custom mode Bass MENU gt ENTER s5 Sound ENTER Custom ENTER Bass 4 ENTER Emphasizes low frequency audio Treble MENU gt ENTER Sound yy ENTER Custom y ENTER gt Treble 4 ENTER Emphasizes high frequency audio Balance MENU ENTER Sound ENTER Custom 5 y ENTER 5 Balance Adjusting the LCD Display Balance L 50 Move 4 Adjust Retum 4 ENTER Allows you to
40. advanced semiconductor technology with a precision of 1ppm one millionth and above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 147 264 When cleaning the monitor and the panel outside please apply the recom mended small amount of cleaner by using a soft cloth to polish Do not force the LCD area but rub softly If excessive force is applied you may stain it If you are not satisfied with the picture quality you can get better quality of picture by performing the Auto Adjustment function in display screen that is ap peared as window termination button is pressed If there s still noise after the automatic adjustment use the Fine Coarse adjustment function ba When viewing a fixed screen for an extended period of time a residual image or blurriness may appear Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time PRODUCT INFORMATION Image Retention Free What is Image Retention Image retention may not occur when a LCD panel is operated under normal con ditions Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time w
41. agicInfo works only on MagicInfo model The Input source of TV works only TV model Image Size Control is available only for the displays for which power status is ON IE Image Size TV AV S Video Component DVI HDCP HDMI DTV 1 Click Image Size of the main icons and the Image Size control screen appears m Multiple Display Control File Remocon Safety Lock Port Selection Help Select All Clear Alt Video Source TV AV S Video Component HDMl DT AutoWide 16 9 Zoom 1 Zoom 2 4 3 Ye Info Grid shows some basic information necessary to Image Size Control 1 Click the Video Source tab to adjust Image Size for TV AV S Video Component DVI HDCP HDMI DTV Click Select All or use Check Box to select a display to control 2 Info Grid displays only the display having TV AV S Video Component or DVI HDCP as input source 3 Switch Image Size of the selected display randomly Note Auto Wide Zoom1 and Zoom2 are not available for selection when the input signal type for Component and DVI HDCP is 720p or 10801 The Auto Wide mode is available only for TV AV and S Video The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only TV model The Image Size Control feature is available only for the displays whose power status is ON lt 1 Click Time of the main icons and the Time Control screen appears m Multiple Display Contra
42. alled on your computer to set up this feature PowerSaver When used as a Network monitor State Normal Opera Power saving Power off tion mode Power switch Power Indicator On Blinking Off Power Con 460UTn 340 W Less than 5 W 0 watts sumption PowerSaver When used as a normal monitor State Normal Opera Power saving Power off tion mode Power switch Power Indicator On Blinking Off Power Con 460UT 270W Less than 2 W 0 watts sumption Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjusts the screen as follows Display Mode Horizontal Vertical Fre Pixel Clock Sync Polarity Frequency quency Hz MHz H V KHz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 640 480 35 000 66 667 30 240 832 624 49 726 74 551 57 284 1152 870 68 681 75 062 100 000 VESA 640 480 37 861 72 809 31 500 VESA 640 480 37 500 75 000 31 500 VESA 800 600 35 156 56 250 36 000 VESA 800 600 37 879 60 317 40 000 VESA 800 600 48 077 72 188 50 000 VESA 800 600 46 875 75 000 49 500 VESA 848 x 480 31 020 60 000 33 750 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 7
43. ard of the computer 3 Ifyou installed a new video card or if you assembled the PC check if you installed the Adaptor video 4 Check if the scanning ratio of the video screen is set to between 50 Hz 85 Hz Do not exceed 60Hz when using the maximum resolution 5 If you have problems in installing the Adaptor video driver boot the computer in Safe Mode remove the Display Adaptor in the Control Panel 5 System Device Admin istrator and then reboot the computer to reinstall the Adaptor video driver Check List Note The following table lists possible problems and their solutions Before calling for assis tance check the information in this section to see if you can remedy any problems for yourself If you do need assistance please call the phone number on the Information section or contact your dealer Problems related to the Installation Note Problems related to the LCD Display installation and their solutions are listed The LCD Display screen flickers Troubleshooting Check if the signal cable between the computer and the LCD Display is securely con nected Refer to Connecting a Computer Shadowiness on the fringe of the panel due to technical limitations The slight shadowiness on the fringe of the panel is due to the inside sheet that is seen through the thin outer bezel which is not a defect but a technical limitation for the panel in the slim bezel design Problems related to the Screen
44. atically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above are used for this product But the pixels of RED GREEN BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen This is not from bad quality and you can use it without any problems For example the number of TFT LCD sub pixels contained in this product are 3 147 264 Note Design and specifications are subject to change without prior notice pra Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment PowerSaver This LCD Display has a built in power management system called PowerSaver This system saves energy by switching your LCD Display to low power mode when it has not been used for a certain amount of time The LCD Display automatically returns to normal operation when Specifications you press a key on the keyboard For energy conservation turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPM compliant video card installed in your computer Use the software utility inst
45. ay If not reset them referring to the current Information under the LCD Display menu and Preset Timing Modes gt gt O gt O gt Troubleshooting The image is too light or too dark Adjusts the brightness and contrast Refer to the Brightness Contrast The screen color is inconsistent Adjust color using Custom under OSD Color Adjustment menu The color image is distorted by dark shadows Adjust color using Custom under OSD Color Adjustment menu The color white is poor Adjust color using Custom under OSD Color Adjustment menu The Power Indicator blinks The LCD Display is currently saving the changes made in the settings to the OSD memory The screen is blank and the power indicator light blinks every 0 5 or 1 seconds The LCD Display is using its power management system Press any key on the keyboard The screen is blank and it is blinking If you see the TEST GOOD message on the screen when you pressing the MENU button check the cable connection between the LCD Display and the computer to en sure that the connector is properly connected Problems related to Audio Note Problems related to audio signals and their solutions are listed below Q A 0 O No sound Ensure that the audio cable is firmly connected to both the audio in port on your LCD Display and the audio out port on your sound card Refer to the Connecting a Computer Check the volume level The sound
46. ay Use to select the screen of your choice 1 2 PC DVI AM HDMI This is deactivated when a TV tuner box is installed Adjusting the LCD Display 5 Magiclnfo UT model can use Magiclnfo menu when mounted Network box 6 TV This is activated when a TV tuner box is installed 7 BNC BNC mode is not supported if the component cable is connected To use BNC mode remove the component cable and connect the BNC cable 8 Component Component mode is not supported if the BNC cable is connected To use Component mode remove the BNC cable and connect the Component cable p Note The direct button on the remote control is the SOURCE button Edit Name 1788 MENU ENTER Input ENTER Edit Name Name the input device connected to the input jacks to make your input source selection easier VCR DVD Cable STB HD STB Satellite STB AV Receiver DVD Receiver Game Camcorder DVD Combo DHR PC Note e When connecting a PC to the HDMI or DVI terminal set Edit Name to PC In other cases set Edit Name to AV However since 640x480 720P 1280x720 and 1080p 1920x1080 are common signals for AV and PC make sure to set the Edit Name in accordance with the input signal The Picture menu changes depending on the input signal and Edit Name Adjusting the LCD Display Picture PC DVI Magiclnfo Mode Available Modes JPC DVI gt HDMI 5 Magic
47. ayer Note e Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control e Then start the DVD Player with a DVD disc inserted Note e A component cable is optional For an explanation of Component video consult your DVD manual Connecting a DTV Set Top Box Note e The connections for a typical Set Top Box are shown below 1 Connect a Component cable between the BNC COMPONENT IN Pg Y Pg port on the LCD Display and the Pg Y Pg jacks on the Set Top Box 2 Connect a set of audio cables between the AV AUDIO IN L AUDIO R on the LCD Dis play and the AUDIO OUT jacks on the Set Top Box Note e Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the LCD Display or on the remote control Note e For an explanation of Component video see your Set Top Box owner s manual Connections Connecting Using a HDMI Cable Note e Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using the HDMI cable e You cannot connect a PC to the HDMI terminal Connecting Using a DVI to HDMI Cable Note e Connect the output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable Connect the red and white jacks of an RCA to stereo for PC cable to the same colored audio output terminals of the digital output
48. device and connect the opposite jack to the DVI PC HDMI AUDIO IN terminal of the LCD Display Connecting to an Audio System a T F EI i e 5 A J AUX LOG em Note e Connect a set of audio cables between the AUX L R jacks on the AUDIO SYSTEM and AUDIO OUT L AUDIO R on LCD Display Connections Connecting a LAN Cable ey a Power cord with Earth nthe event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display L Connect the LAN cable Note Applicable to the UTn model only Connecting a USB device ey a Power cord with Earth nthe event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV in
49. display 6 Tint Adjusts Tint of the selected display Available only for NT 7 Color Tone Adjusts the Color Tone for the selected display 8 Color Temp Adjusts the Color Temp for the selected display 9 Brightness Sensor Adjusts the Brightness Sensor for the selected display 10 Dynamic Contrast Adjusts the Dynamic Contrast for the selected display The Input source of MagicInfo works only on MagicInfo model Color Temp is only enabled if the Color Tone is set to Off The Input source of TV works only on TV model This feature is available only for the displays whose power status is ON and if no selection is made the factory default is displayed Settings Picture PC 1 Click Settings of the main icons and the Settings Control screen appears File Remocon Safety Lock Port Selection Help Setect Alt Clear All Busy 1 Picture PC PC BNC DVI Contrast ob Brightness 50 Red Color Tone JColor Temp 10000K Brightness Sensor Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture PC Available only for PC BNC DVI
50. dy on the stand when lowering it bag A DEQ e This may cause damage to the product or the person carrying peus it Clean When cleaning the monitor case or the surface of the TFT LCD screen A N wipe with a slightly moistened soft fabric L3 Do not spray cleaner directly onto the surface of the product Ex i yn e Otherwise this may result in the discoloration and distortion of Qo the structure and the screen surface may peel off L3 Clean the product using a soft cloth with a monitor cleaner only x 4 must use a cleaner other than the monitor cleaner dilute it with water at a ratio of 1 10 Others Safety Instructions L3 When cleaning the power plug pins or dusting the power outlet clean it with a dry cloth Otherwise it may result in fire L3 When cleaning the product make sure to disconnect the power cord Otherwise it may result in electric shock or fire L3 When cleaning the product disconnect the power cord and clean it softly with a dry cloth Donotuse chemicals such as wax benzene alcohol thinner mosquito repellant lubricant or cleaner These may change the appearance of the product surface and peel off the indica tion labels on the product L3 Since the product housing is easily scratched make sure to use the specified cloth only e Use the specified cloth adding only a little water As the product may be scratched if there is any foreign material on t
51. e 4 Small Turns on the PIP of the selected display and changes the size to Small 5 Double 1 Turns on the PIP of the selected display and changes the size to Double 1 6 Double 2 Turns on the PIP of the selected display and changes the size to Double 2 7 Double 3 Picture By Picture Turns on the PBP of the selected display and changes the size to Double 3 TheInput source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model PIP Size can be controlled with turning on the LCD Display power NG PIP PIP Source 1 Click PIP of the main icons and the PIP control screen appears All inputs OFF Large Small Double 1 Double Double 3 O O Misi File Safety Lock Port Selection Help Select All Chaar At PIP Source All Inputs S Video Component 7 HDMI Ye Info Grid shows some basic information necessary to PIP Source Control 1 PIP Source PIP Source can be controlled with turning on the LCD Display power 2 PC Changes the source of the PIP of the selected display to PC 3 BNC Changes the source of the PIP of the selected display to BNC 4 DVI Changes the source of the PIP of the selected display to DVI 5 AV Changes the source of the PIP of the selected display to AV 6 S Video Changes the source of the PIP of the selected display to S Video 7 Component Change
52. e screen The audio resumes if MUTE or VOL is pressed in the Mute mode Selects the TV and DTV mode directly Opens the on screen menu and exits from the menu or closes the adjustment menu Activates a highlighted menu item Current picture information is displayed on the upper left corner of the screen Press to add or delete channels and to store channels to the favorite channel list in the Channel List menu TV channels provide written information services via tele text Teletext Buttons 9 E9 9 da 00a a 9 8 EX For more information TTX MIX Press the button once to freeze the screen Press it again to unfreeze Adjusts the screen display automatically in PC mode By changing the resolution in the control panel auto function is performed When pressing this button the current mode is displayed at the bottom centre of the screen The LCD Display has a 16 MDC 17 LOCK 18 27 SOURCE 19 E ENTER PRE CH 20 CH PA 21 D MENU 22 GUIDE 23 3 RETURN 24 Up Down Left Right but tons 25 7 Ul EXIT 26 0 srs 27 Magjiclnfo 28 P MODE 29 Tl DUAL MTS Introduction built in high fidelity stereo amplifier Then press the button again to circle through available preconfigured modes Standard Music Movie Speech Custom MDC Quick Launch Button Activates or deactivates all function keys on both the remote control and the
53. e sure to re insert and tighten the safety pin 3 to securely hold the product to the bracket T LCD Display B Wall Bracket Wall Wall Bracket Angle Adjustment Adjust the bracket angle to 2 before installing it on the wall 20 5 0 _ 120 159 LE ee 1 Fix the product to the wall bracket 2 Hold the product at the top in the center and pull it forward direction of the arrow to adjust the angle Note You can adjust the bracket angle between 2 and 15 Introduction Make sure to use the top center and not the left or the right side of the product to adjust the angle Connections Connecting a Computer ey a Power cord with Earth e In the event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display t lag Connect the power cord for your LCD Display to the power port on the back of the LCD Display Turn on the power switch There are 2 ways to connect the D sub to your LCD Display Choose of the following U
54. errite core and clip it around the cable near the plug Introduction Your LCD Display Front Note The buttons are on the right at the back of your product MENU button MENU Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Navigate buttons Up Down buttons Moves from one menu item to another vertically or adjusts selected menu values Adjust buttons Left Right buttons Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values When OSD is not on the screen push the button to adjust volume ENTER button ENTER Activates a highlighted menu item SOURCE button SOURCE Switches from PC mode to Video mode Changing the source is only al lowed for external devices that are connected to the LCD Display at the time PC DVI AV HDMI Magiclnfo TV BNC Com ponent Note e The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box D MENU Opens the on screen D MENU Introduction Note This is available when a TV tuner box is installed Power button Use this button for turning the LCD Display on and off Brightness Sensor The product s Brightness Sensor function automatically detects the sur rounding brightness using a brightness sensor and adjusts its brightness accordingly
55. fire L3 Do not forcefully bend or pull the power plug and do not place any heavy material on it e Otherwise this may result in fire L3 Do not connect multiple appliances to the same power outlet e Otherwise this may cause fire due to overheating L3 Do not disconnect the power cord while using the product Otherwise this may result in damage to the product due to electric shock L3 To disconnect the apparatus from the mains the plug must be pulled out from the mains socket therefore the mains plug shall be readily operable This may cause electric shock or fire L3 Use only the power cord provided by our company Do not use the provided power cord of another product Otherwise this may result in fire or electric shock Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust high or low temperatures high hu midity and exposed to chemical substances and where it operates for 24 hours such as at airports train stations etc Failure to do so may cause serious damage to your monitor 0 DO Ensure that at least two persons lift and move the product Otherwise it may be dropped and cause personal injury and or damage the product L3 When installing the product in a cabinet or rack make sure that the front end of the bottom of the product does not project out Otherwise it may fall or cause personal injury Usea cabinet or rack of a s
56. gt ENTER s5 Picture ENTER Custom ENTER Contrast Contrast _ Ct 4 ENTER Adjusts the Contrast Brightness MENU ENTER Picture ENTER Custom ENTER Brightness Brightness aaa 4 ENTER Adjusts the Brightness Sharpness MENU ENTER Picture ENTER Custom ENTER gt Sharpness Sharpness 4 ENTER Adjusts the Sharpness Color Tone MENU gt gt ENTER Picture SENTER Color Tone Adjusting the LCD Display H Of Cool Normal Warm Custom amp Y ENTER The color tones can be changed Not available in Dynamic Contrast mode of On 1 Off 2 Cool 3 Normal 4 Warm 5 Custom Note If you set the Color Tone to Cool Normal Warm or Custom the Color Temp function is disabled If you set the Color Tone to Off the Color Control function is disabled Color Control LIT Red Green Adjusts individual Red Green Blue color balance MENU gt gt ENTER Picture ENTER Color Control Not available in Dynamic Contrast mode of On Note If you adjust the picture by using the Color Control function Color Tone will turn to the Cus tom mode MENU ENTER Picture ENTER Color Control ENTER Red 4 E
57. h 2 Medium 3 Low 4 Opaque Safety Lock PIN 6 7 uri MENU gt gt ENTER Setup 5 ENTER Safety Lock PIN Enter Pin Adjusting the LCD Display 0 9 0 9 0 9 0 9 0 9 0 9 0 9 0 9 0 9 0 9 0 9 0 9 The password can be changed Note The preset password for the LCD Display is 0000 Energy Saving Thi MENU gt ENTER Setup ENTER Energy Saying amp ENTER This feature adjusts the power consumption of the unit in order to save energy 1 Off 2 On HDMI Black Level 1 MENU gt 257575 ENTER Setup 5 9o ENTER gt HDMI Black Level sa Y ENTER When a DVD or set top box is connected to your TV via HDMI it may cause a degradation in the screen quality such as an increase in the black level a low contrast or discoloration etc depending on the external device connected In this case adjust the screen quality of your TV by configuring the HDMI black level 1 Normal 2 Low Video Wall A Video Wall is a set of video screens connected together so that each screen shows a part of the whole picture or where the same picture is repeated on each screen When the Video Wall is on you can adjust the Video Wall screen setting Adjusting the LCD Display MENU 257 5755 ENTER Setup Y ws yo yo ENTER gt Video Yall Note When Video Wall is running
58. he cloth make sure to shake it thoroughly before using it L3 When cleaning the product do not spray water directly onto the main body of the product Ensure that water does not enter the product and that it is not wet Otherwise this may result in electric shock fire or a malfunc tion L3 The product is a high voltage product Ensure that users do not disassemble repair or modify the product themselves Otherwise this may result in electric shock or fire If the product needs to be repaired contact a Service Center L3 If there is a strange smell or a strange sound or smoke is coming from the product disconnect the power plug immediately and con tact a Service Center Otherwise this may result in electric shock or fire L3 Do not place this product in a location exposed to moisture dust smoke water or in a car e Otherwise this may result in electric shock or fire L3 When you drop the product or the case is broken turn the power off and disconnect the power cord Contact a Service Center Otherwise this may result in electric shock or fire Safety Instructions If thunder or lightening is occurring do not touch the power cord or antenna cable Otherwise this may result in electric shock or fire L3 Do not try to move the monitor by pulling only the wire or the signal cable Otherwise it may fall and result in electric shock damage to the product or fire due to damage t
59. ime turn on the Mute function for the selected set The Mute function is disabled automatically when you adjust the volume level The values return to the default settings when you undo the selections or choose Select All The Power Control feature is available for all displays The Volume Control and Mute features are available only for the displays whose power status is ON Input Source 1 Click Input Source of the main icons and the Input Source control screen appears Click Select All or use Check Box to select a display to control e TV Mode lm Multiple Display Control File Remocon Safety Lock Port Selection Select Alt Clear Alt Choose Input Source 5 Video Component 8 MAARI inira 9 HDMI Channel 7 e PC Mode Im Multipte Display Cant Safety Lock Port Selection Setect Alt Chem AT Choose Input Source S Video f Comp oneni eme 9 a HDMI 40 La Fi Je Info Grid shows some basic information necessary to Input Source Control 1 PC Changes the Input Source of the selected display to 2 BNC Changes the Input Source of the selected display to BNC 3 DVI Changes the Input Source of the selected display to DVI 4 TV Changes the Input Source of the selected display to TV 5 DIV Changes the Input Source of the selected display to DTV 6 AV Changes the Input Source of the selected display to AV 7 S Video Cha
60. inance Cycle Change the characters color and background color every 30 minutes FLIGHT TIME FLIGHT TIME FLIGHT TIME OZ348 20 30 Every 30 minutes change the characters with movement FLIGHT TIME 3 1g FLIGHT TIME OZ348 20 30 TE PEEL E OZ348 20 30 Step 1 Step3 All area display Moving image together with Logo periodically Cycle Display moving image together with Logo for 60 seconds after 4 hours in use The best way to protect your monitor from Image retention is to turn Power off or set your PC or System to operate a Screen Saver program when you are not using it Also Warranty service will be limited based on instruction guide Apply the Screen Scroll function on Product e Apply the Screen Scroll function Symptom Horizontal Bar with Black Color move up and down Horizontal Bar with Black color I 02348 20 30 UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Screen Scroll e Time Interval 1 10 hours Recommend 1 e Time Period 1 5 second Recommend 5 Information Note Please check CD s User Guide at OSD Function some model s will not availa ble Apply the Screen Pixel function on Product e Apply the Screen Pixel function Symptom Dot with Black Color move up and down FLIGHT TIME 1 2348 20 30 UA102 21 10 Select method e Instruc
61. info filtv Note The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box MagicBright LX MENU gt ENTER Picture ENTER MagicBright Entertain ustom amp ENTER MagicBright is a feature providing the optimum viewing environment depending on the con tents of the image you are watching Currently four different modes are available Entertain Internet Text and Custom Each mode has its own pre configured brightness value Not available in Dynamic Contrast mode of On 1 Entertain High brightness For watching motion pictures such as a DVD or VCR 2 Internet Medium brightness For working with a mixture of images such as texts and graphics 3 Text Normal brightness For documents or works involving heavy text Adjusting the LCD Display 4 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu Custom LIT By using the on screen menus the contrast and brightness can be changed to your personal preference MENU gt ENTER Picture ENTER Custom Not available in Dynamic Contrast mode of On Note By adjusting the picture using the Custom function MagicBright will change to Custom mode Contrast MENU
62. ith a fixed pattern over 12 hours there may be slight difference in voltage between electrodes that work the liquid crystal LC in a pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Information Common Electrode ITO Black Matrix Color F ilter Data Gate Bus Line TFT Pixel Electrode Storage Capacitor ITO Cs o Power Off Screen Saver or Power Save Mode Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use e Set the Monitor to power off with the PC Display Properties Power Scheme Use a Screen saver if possible Screen saver in one color or a moving image is recommended Change the Color Information periodically Type 1 FLIGHT Type 2 FLIGHT O2348 OZ2348 UA102 UA102 CT Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes Information e Avoid using a combination of characters and background color with large dif ference in luminance Avoid using Grey colors which can cause Image retention easily Avoid Colors with big difference in luminance Black amp White Grey zus iz Change the characters color periodically Use Bright colors with little difference in lum
63. ize appropriate to the product NOT PLACE CANDLES MOSQUITO REPELLANT CIGA RETTES AND ANY HEATING APPLIANCES NEAR THE PROD UCT e Otherwise this may result in fire Safety Instructions L3 Keep heating appliances as far away from the power cord or the product as possible Otherwise this may result in electric shock or fire L3 Do not install it in a badly ventilated location such as a bookcase or closet Otherwise this may result in fire due to an increase in the in ternal temperature When putting the product down make sure to put it down softly Vul E Otherwise this may result in damage to the screen display L3 Do not place the front of the product on the floor a X Otherwise this may result in damage to the screen display Q ZA D Ensure that an authorized installation company installs the wall va mount LA Otherwise it may fall and cause personal injury Make sure to install the specified wall mount 43 L3 Install your product in a well ventilated location Ensure that zi there is a clearance of more than 10 cm from the wall i Otherwise it may result in fire due to an increase in the internal temperature a L3 Ensure that the packaging vinyl is kept away from children ol e Otherwise it may result in serious harm suffocation if children 0 a play with it L3 If the height of your monitor is adjustable do not place any ob nd Z um ject or part of your bo
64. le in PC mode only ru Note The Reset function is not available when Video Wall is On Color Reset ba 1581 MENU v Ox ENTER Setup 5 Y YS gt FO FO FO 9v FF ENTER 5 Reset ENTER Color Reset Color Reset 4 ENTER Adjusting the LCD Display OSD Rotation MENU v ENTER Setup yrs YS YO YO FO FO TH Y v ENTER OSD Rotation 4 ENTER OSD Rotate 1 Landscape 2 Portrait Lamp Control MENU v ENTER Setup 5 yrs YS YS YO FO FO 9v Y ENTER Lamp Control Lamp Control m Ji 100 AUST 5 Retum 4 ENTER Adjusts the inverter lamp in order to reduce energy consumption a f Note This function does not operate when Dynamic Contrast is set to On in PC DVI AV HDMI TV modes Multi Control Available Modes JPC DVI HDMI 5 Magicinfo UV Note e The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box Adjusting the LCD Display Multi Control La 7 81 Assigns an individual ID to the SET MENU gt gt T gt T gt Y gt ENTER Multi Control ENTER amp 0 9 e ID Setup Assigns distinctive IDs to the SET e ID Input Use to select the transmitter functions of the individual SET Only a SET where the ID corresponds to the transmitter
65. level V high2 2 0 V V low s 0 8 V Maximum Pixel Clock 165MHz Analog Digital Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Signal Cable 15pin to 15pin D sub cable Detachable DVI D to DVI D connector Detachable Dimensions W x H x D Weight SyncMaster 460UT 1025 7 x 579 8 x 130 0 mm 40 4 x 22 8 x 5 1 inch Without Stand 1025 7 x 644 0 x 311 0 mm 40 4 x 25 4 x 12 2 inch With Stand 27 9 kg 61 5 Ibs Specifications Dimensions W x H x D Weight SyncMaster 460UTn 1025 7 x 579 8 x 130 0 mm 40 4 x 22 8 x 5 1 inch Without Stand 1025 7 x 644 0 x 311 0 mm 40 4 x 25 4 x 12 2 inch With Stand 29 4 kg 64 8 Ibs VESA Mounting Interface 600 x 400 mm Environmental considerations SyncMas Operating Temperature 50 F 104 10 40 ter 460UTn Humidity 10 Yo 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing SyncMas Operating Temperature 32 F 104 F 0 C 40 C ter 460UT Humidity 10 Yo 80 Yo non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This LCD Display can be installed on any Plug amp Play compatible system The interaction of the LCD Display and the computer systems will provide the best op erating conditions and LCD Display settings In most cases the LCD Display installation will proceed autom
66. level is too low Check the volume level If the volume is still too low after turning the control to its maximum check the volume control on the computer sound card or software program The sound is too high or too low Adjusts the Treble and Bass to the appropriate levels Troubleshooting Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed Q amp A Q A A A A A 2 The remote control buttons do not respond Check the polarities of the batteries Check if the batteries are empty Check if the power is on Check if the power cord is securely connected Check if a special fluorescent or neon lamp is on in the vicinity How can change the frequency The frequency can be changed by reconfiguring the video card E Note That video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details How can Adjusts the resolution Windows XP Set the resolution in the Control Panel Appearance and Themes Display Set tings Windows ME 2000 Set the resolution in the Control Panel Display Settings Contact the video card manufacturer for details How can set the Power Saving function Windows XP Set the resolution in the Control Panel Appearance and Themes Display Screen Saver Set the function in the BIOS SET UP of the computer
67. mber of screens can be selected with a different layout when dividing e Select a mode in Screen Divider e Select a display in Display Selection e The selection will be set up by pressing a number in the selected mode Adjusting the LCD Display Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time e The Safety Screen function scrolls the screen for the specified period of time This function is not available when the power is turned off MENU gt 5 ENTER Setup gt 5 Y v 5 5v ENTER Safety Screen Pixel Shift Note The Pixel Shift is not available when Video Wall is On Pixel Shift MENU 5 ENTER Setup 5 5 gt v5 5v ENTER Safety Screen ENTER Pixel Shift ENTER Pixel Shift 4 ENTER To prevent after images on the screen you can use this function so that every minute pixels on the LCD are moved in horizontal or vertical direction 1 Off 2 On Horizontal Dot MENU gt 5 ENTER Setup v gt 5 5v ENTER gt Safety Screen ENTER Pixel Shift ENTER Horizontal Dot ENTER Sets how many pixels the screen moves horizontally Five adjustment levels O 1 2 3 and 4 Adjusting the LCD Display Vertical Line MENU gt 5 ENTER Setup 5 5 gt v
68. mect operation of your system either immediately of in the future Microzolt strongly recommends that pou stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing STOP Using the Software Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Installing the Monitor Driver Manual Microsoft Windows Vista Operating System 1 Insert your Manual CD into your CD ROM drive 2 Click EH Start and Control Panel Then double click on Appearance and Personal ization 3 memme mm m mil mba ee oe EEN E GP num eum ee ie um e pee m eri r rz gum m da Se oe rT i r m Sum Ld 4 Dang or Kara bo makeh piu mood I lupe en AA Gefore LE F 5 Click Properties in the Monitor tab If the Properties button is deactivated it means the configuration for your monitor is completed The monitor can be used as is Using the Software If the message Windows needs is displayed as shown in the figure below click Continue Meniier A Gran Monitor BY fe tinge gan rate BiHan pje red Pal PA LOL aY Ei check ix dipa you 5c ad dispury sedem az Ha mart Cannot
69. mode of On 1 Dynamic 2 Standard 3 Movie 4 Custom 7 Note The direct button on the remote control is the P MODE button Custom By using the on screen menus the contrast and brightness can be changed to your personal preference MENU ENTER Picture ENTER Custom Not available in Dynamic Contrast mode of On Contrast MENU gt ENTER ss Picture ENTER Custom ENTER Contrast Contrast ER 100 4 ENTER Adjusts the Contrast Brightness MENU ENTER Picture ENTER Custom ENTER gt Brightness Brig hiness 4 ENTER Adjusts the Brightness Sharpness MENU ENTER Picture ENTER Custom ENTER Sharpness Sha rpness 40 4 ENTER Adjusts the picture Sharpness Color Tint Adjusting the LCD Display MENU ENTER 5 Picture ENTER Custom ENTER Color 4 ENTER Adjusts the picture Color MENU gt ENTER Picture ENTER Custom 5 5 ENTER Tint Tint 4 ENTER Adds a natural tone to the display Color Tone MENU gt ENTER ss Picture y 5 ENTER Color Tone amp Y ENTER The color tones can be changed The individual Color components are also user adjustable
70. nal PC and UT UTn LFD must be connected through Serial Cable Note e LFD Large Format Display e UTn Model name of LFD with Network Board Model name of LFD without Network Board e PC Personal Computer a Magicilnto Calibration Miscellaneous Stan Monitor calibration Please create new profile or open existing profile Enter ihe setings click start button and then Next Calibration Mode a Fort Selection T Monitor ID Brighiness The target brightness Color Coordinate White Point 6500K D a 055 085 4000K nd 10000K x 03128 v 03292 Using the Software For detailed instructions install the Eye One Display and run the WhiteBalance program and then press the Help bar at the bottom of the figure above MDC Installation gt Insert the installation CD into the CD ROM drive Click the MDC installation file Note If the popup window to install the software for the main screen is not displayed proceed with the installation using the MDC executable file on the CD When the Installation Shield Wizard window appears click Next Select agree to the terms of the license agreement to accept the terms of use Click Install The Installation Status window appears Click Finish When the installation is complete the MDC executable icon appears on your desktop Double click the icon to start the program MDC execution icon may not appear depending on specification of compu
71. nges the Input Source of the selected display to S Video 8 Component Changes the Input Source of the selected display to Component 9 MagicInfo The Input source of MagicInfo works only on MagicInfo model 10 HDMI Changes the Input Source of the selected display to HDMI 11 Channel Channel arrow appears when the Input Source is TV TV Source can be selected only in products with TV and controlling channels is allowed only when Input Source is TV The Input Source Control feature is available only for the displays whose power status is ON IE Image Size PC BNC DVI 1 Click Image Size of the main icons and the Image Size control screen appears Multiple Display Cont Safety Lock Port Selection Help Select Alt Clear All PC Source PC BNC DVI 15 9 4 3 Info Grid shows some basic information necessary to Image Size Control 1 9 Power Status Shows the power status of the current display 2 Image Size Shows the current Image Size of the display in use 3 Input Shows the current Input Source of the display in use 4 Info Grid displays only the displays whose Input Source is PC BNC DVI 5 PC Source When you click Image Size the PC Source tab first appear The Image Size Control button controls Image Size available for PC BNC DVI 6 Video Source Click the Video Source tab to control Image Size for respective Input Source The Input source of M
72. o the cable L3 Do not lift or move the product back and forwards or right and 4 left while only holding the power cord or signal cables Ar E Otherwise it may fall and result in electric shock damage to the product or fire due to damage to the cable L3 Make sure that the ventilating opening is not blocked by a table or curtain Otherwise it may result in fire due to an increase in the internal temperature L3 Do not place any containers containing water vases flower pots medicines as well as any metal on the product e fwater or a foreign material enters the product disconnect the power cord and contact a Service Center This may result in a product malfunction electric shock or fire L3 Do not use or keep combustible spray or flammable material near the product a Otherwise this may result in an explosion or fire L3Do not insert any metal such as chopsticks coins pins and steel or flammable objects such as matches or paper inside the product through the ventilating openings input and output termi nals etc f water or foreign material enters the product disconnect the power cord and contact a Service Center Otherwise this may result in electric shock or fire L3 When using a fixed screen for a long time an afterimage or stain may occur e f you are not using your product for a long period of time put it into sleep mode or use a moving screen saver L3 Set a re
73. ode Press ALT F12 to directly go to the Magiclnfo Window screen To setup Magiclnfo on a Windows screen a keyboard and mouse are required To setup Magiclnfo on a Windows screen refer to the Magiclnfo Server Help It is highly recommended not to turn off the AC power during an operation For pivoted LCD Displays ticker transparency is not supported For pivoted LCD Displays a screen resolution of up to 720 480 SD is supported for movies For drive D EWF is not applied When the contents of Setup have been changed when EWF is in the Enable state to save the changes in the disk you must Commit them By selecting Disable Enable or Commit the system is restarted Adjusting the LCD Display intal language S eec tine language vou want bo mitol on tha zyzbem renis Seg Current Language English English Cheese radtondal German reer Jananete Korean E Swedish C Furie z implied ET a Fi F Do ret thee Sobri Cancel 1 Select Magiclnfo in the Source List menu 2 The MUISetup screen appears Select the language you want to use 3 Press the Install button If you select Do not show again and click the Install button the Scheduler screen is displayed after rebooting 4 Connect your keyboard and mouse and press the ALT F12 keys on your keyboard 5 The Windows Desktop is displayed and the Magiclnfo icon the image will
74. odel Note Introduction Using the Anti Theft Kensington Lock 1 Insert the locking device into the Ken sington slot on the Monitor Oana turn it in the locking direction Connect the Kensington Lock cable Fix the Kensington Lock to a desk or a heavy stationary object See Connecting Cables for further information regarding cable connections Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display causing a malfunction due to interference with the frequen cy O 80060000909 8df8690M909 OO Number Buttons DEL button VOL K MUTE TV DTV MENU 1 INFO COLOR BUTTONS TTX MIX STILL AUTO S MODE MDC LOCK SOURCE ENTER PRE CH v CHIPA D MENU GUIDE 1 POWER 2 CJ off 3 Number Buttons 4 DEL button 5 4 VOL 6 5X MUTE 7 TVIDTV 8 MENU g 10 1 INFO 11 COLOR BUTTONS 12 ESL TTXIMIX 13 STILL 14 AUTO 15 S MODE Introduction RETURN Up Down Left Right buttons Exit srs Magiclnfo P MODE HI DUAL MTS PIP SWAP 66 6 6 6 6 6609 Turns the product On Turns the product Off Press to change the channel The button operates only for DTV It is used to select MMS multi channel for a DTV Adjusts the audio volume Pauses mutes the audio output temporarily This is dis played on the lower left corner of th
75. omposed of 1366 horizontal dots horizontal res olution and 768 vertical lines vertical resolution This feature outputs sonorous and vivid 3D sound as for 5 1 channel speaker sound but through a 2 channel speaker It has a good effect when stereo signals are input Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other Euro pean countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic acces sories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local gov ernment office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase con tract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Appendix Correct disposal of batteries in this product Europe only Applicable in the European Union
76. omputer Time 1 7 LR Selects from one of 4 time settings Clock Set Sleep Timer On Timer and Off Timer MENU 5 ENTER Setup ENTER Time Clock Set MENU gt 575 ENTER Setup ENTER Time ENTER Clock Set Adjusting the LCD Display Hour Minute am pm T sa Y 4 ENTER Current Time Setting Sleep Timer MENU gt ENTER Setup ENTER Time y ENTER Sleep Timer Move Enter Return ENTER Turns the LCD Display off automatically at certain times 1 Off 30 60 2 3 4 90 o 120 6 150 f 180 On Timer MENU gt gt gt ENTER Setup x ENTER Time ENTER Timer Minute Adjusting the LCD Display T a ENTER Turns the LCD Display on automatically at a preset time Controls the mode and the volume level at the time the LCD Display turns on automatically Off Timer MENU gt ENTER Setup ENTER Time ENTER Uff Timer Hour Minute am pm F 12 Activated a 7 4 ENTER Turns the LCD Display off automatically at a preset time Menu lt la MENU gt ENTER Setup ENTER Menu Transparency Hig h Medium amp ENTER Change the transparency of the background of the OSD 1 Hig
77. option ko select the desce drea hom a bet Windows does mot guarentee hat Ghee posa vell ba ha Beret match For your hides That arina ii moli Cie e C Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Insta il From Disk Hardware Update Wizard Select the device diver you want bo insball bor ihiz harden Incest the manulacturei s mstallahon dek and then 4 ao Taisi the a oda of voeur hadaa dra andi irn cle Hit IN gni make sure thal the correct drive is selected below 4 have dak that contains Hue yea add bo thal chek Hasse Dok Modd Samsung saa Copy manulachuner s fles Hom df This driver ix mot digitally signed Lel me marina i mocrtant n Be J If you can see following message window then click the Continue Anyway button Then click OK button Hardware Installation The software pou ane installing for this hardware Samsung sawa has nal passed Logo be bo wany i inahas PP moo vere thes basing ts importan Continuing your inetallation of this software map impar or destabilize the corect operation of your system ether immediately of m the future Microsoft zbronagly commends thal pou stop this installation now and contact th hardware vendo for software that has pas
78. or the user The fre quency of this repetition per second is called the Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per sec ond this is regarded as 60 Hz The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Interlace and Non Interlace Methods Plug amp Play Resolution SRS TS XT Correct Disposal Appendix Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Inter lace method is the same as that used in TVs This is a function that provides the best quality screen for the user by allowing the computer and the monitor to ex change information automatically This monitor follows the international standard VESA DDC for the Plug amp Play func tion The number of horizontal and vertical dots used to compose the screen image is called the resolution This number shows the accuracy of the display A high resolution is good for performing multiple tasks as more image information can be shown on the screen Example If the resolution is 1366 x 768 this means the screen is c
79. p to 5x5 LCD Displayes 3 On Off Turns on off the Video Wall function of the selected display 4 Format The format can be selected to see a divided screen Full Natural You may not operate this function in MagicInfo The Input source of TV works only on TV model The Maintenance Control function is available only for the displays where the power status is ON Troubleshooting 1 The display you wish to control does not appear on the Power Control Info Grid Check the connection of RS232C Check if it is properly connected to the Com1 port Check the displays to see if any of the other displays connected have the same ID If more than one displays have the same ID those displays are not properly detected by the program due to data conflict Check if the Display Set ID is a number between 0 and 25 Adjust using the Display menu Note A Display Set ID must be a value between 0 and 25 2 The display you wish to control does not appear on the other Control Info Grids Check to see if the display power is ON You can check this in Power Control Info Grid Check if you can change the input source of the display 3 The dialogue box appears repeatedly Check to see if the display you wish to control is selected 4 Both On Timer and Off Timer have been set but different time is showing Apply current time to synchronize the display clocks 5 The remote may not function properly when you turn
80. put devices refer to the contents under Adjusting Your LCD Display Connections You can connect USB devices such as a mouse or keyboard Note Applicable to the UTn model only Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the oper ating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide Installing the Monitor Driver Automatic 1 Insert CD into the CD ROM drive 2 Click Windows 3 Choose your monitor model in the model list then click the OK button un SAMSUNG monitor installer Select the display edapter on which you wer lo intel he monitor IL 555 Flug and Pine Morice Salad the motor which vou wemi bo install 4 Ifyou see following message window then click the Continue Anyway button Then click OK button Microsoft Windows XP 2000 Operating System Hardware Installation The software you installing for this hardware Samsung sasa has not passed Windows Logo besting bo wenky compahkdiy wath Windows XP Tell me wiw the basing is important Continuing your installation of this software may impair or destabilize the co
81. r Control 1 Click Power Control of the main icons and the Power Control screen appears lis Multiple Display Contra pr ee Sic File Remocon Safety Lock Port Selection Help SAMSUNG lc ojojoj sr O verO0n Power Off Input Source T 13 T Volume 10 aa aa 2 io I Lamp Temo Siaus Fan Curerttemo Sein lt am p Maintenance Ye Info Grid shows some basic information necessary to Power Control 1 9 Power Status 2 Input 3 Image Size 4 On Timer 5 Off Timer 2 Use the Select All button or Check Box to choose a display to control ipe Multiple Display Contro E IE HE UE ELI File Remocon SafetyLock Port Selection Help SAMSUNG MI o Tf inp image Size lon Timer m Power On Power Off Input Source KO Mulume 1 Hang Image Size Main ite nance Je Power Control allows controlling some of the functions of the selected display 1 Power On Off Turns the power of the selected display On Off 2 Volume Controls the volume level of the selected display It receives the volume value of the selected display from the sets and displays it in the slider When you cancel the selection or choose Select All the value returns to the default value 10 3 Mute On Off Turns on off the Mute function of the selected display When selecting one set at a t
82. r any injury caused by installation at customer s discretion Introduction Dimensions EN Li n Gm mou MA Notice For securing the bracket on a wall use only machine screws of 6 mm diameter and 8 to 12 mm length Wall Bracket Installation e Contact a technician for installing the wall bracket e SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer e This product is for installing on cement walls The product may not stay in place when installed on plaster or wood Components Only use the components and accessories shipped with the product T NG Ad ik Wall Bracket 1 Hinge Left 1 Right Plastic Screw Screw Anchor 1 Hanger A 11 B 4 11 4 Wall Bracket Assembly Note There are two hinges left and right Use the correct one 1 Insert and tighten the Captive Screw in the direction of the arrow When done mount the wall bracket on the wall Introduction Ir Jl E We ig i Tig a z m KT 1 ke T anl E 4 L Q ws a xd Va 0 L There are two hinges left and right Use the correct A Captive Screw B Wall Bracket C Hinge Left D Hinge Right Before drilling into the wall check if the length between the two locking holes at the back of the product is correct If the length is too short or long loosen all or
83. s the source of the PIP of the selected display to Component 8 HDMI Changes the source of the PIP of the selected display to HDMI Note Some of the PIP Sources may not be available for selection depending on the input source type of the Main Screen The Input source of MagicInfo works only on MagicInfo model The PIP Control feature is available only for the displays whose power status is ON and the PIP function is set to ON Settings i ma 1 UE Picture 1 Click Settings of the main icons and the Settings Control screen appears me Multiple L isp au anir l File Remocon Safety Lock Port Selection Help S ecrAmT Chear Alt Picture MW AW S Nideo Component HOMI OTY Tint Color Tone Color Temp 10000K Info Grid shows some basic information necessary to Settings Control When each function is selected the set value of the selected function is displayed in the slide When selected each function fetches the value for the set and displays it on the slide bar When Select All is chosen the default value is displayed Changing a value in this screen will automatically change the mode to CUSTOM 1 Picture Available only for TV AV S Video Component HDMI DTV 2 Contrast Adjusts Contrast of the selected display 3 Brightness Adjusts Brightness of the selected display 4 Sharpness Adjusts Sharpness of the selected display 5 Color Adjusts Color of the selected
84. sed Windows Logo testing Genius ETOP raimon Note This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Completing the Hardware Update Wizard Tha kar the oiera fe E Samsung E Samsung sess Diwa Tampir Creaa Dabe 51422001 Ves dcn 1 0 00 Chigi 5 Oro Dota Bol Back Driver Coes To vio chebadis about ho dira flow To Lala het los thet device li tha dosa kada after updating then dies nodi bak bo ika peek mababad hissi Chick Frith lo cbe the Tauminaali kha dna ce Using the Software 10 Monitor driver installation is completed Microsoft Windows 2000 Operating System When you can see Digital Signature Not Found on your monitor follow these steps 1 Choose OK button on the Insert disk window 2 Click the Browse button on the File Needed window 3 Choose A D Driver then click the Open button and then click OK button How to install 1 Click Start Setting Control Panel 2 Double click the Display icon 3 Select the Settings tab and click Advanced Properties button 4 Choose Monitor
85. setting becomes activated Magiclnfo Available Modes HDMI 5 Magicinfo HT Note e The TV menu is available when a TV tuner box is installed UT model can use Magiclnfo menu when mounted Network box Note For Magiclnfo a remote control is available for Magiclnfo However it is recommended using a separate USB keyboard For Magiclnfo in Device mode moving external devices while booting may cause errors Set up external devices only if the LCD Display turns on e Do not unplug the LAN cable used for the network ex video display Otherwise the program Magiclnfo may stop If you do unplug the cable restart the system e Do not unplug the LAN cable used by an USB device ex video display Otherwise the program Magiclnfo may stop Magiclnfo Adjusting the LCD Display To access other sources press the SOURCE button in Magiclnfo The preset password for the LCD Display is 000000 The server program s Power On option works only if the LCD Display s power is com pletely shut off Please make sure not to use the Power On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display In the OSD image of Magiclnfo Network mode is the same as Device When using Magiclnfo with the Magiclnfo Server Program perform Network mode When using MagiclInfo with the device directly connected to LCD Display execute Device m
86. sing the D sub Analog connector on the video card Connect the D sub to the 15 pin RGB port on the back of your LCD Display and the 15 pin D sub Port on the computer Using the DVI Digital connector on the video card e Connect the Cable to the DVI port on the back of your LCD Display and the DVI port on the computer Connections Using the BNC Analog connector on the video card e Connect the BNC Cable to the BNC COMPONENT IN R G BH V ports on the back of your LCD Display and the 15 pin D sub Port on the computer o e v o V LM E a Connect the audio cable for your LCD Display to the audio port on the back of your computer Note Turn on both your computer and the LCD Display e Contact a local SAMSUNG Electronics Service Center to buy optional items Connecting to Other devices ey a Power cord with Earth e Inthe event of failure the earth lead may cause electric shock Make sure to wire the earth lead in correctly before connecting the AC power When un wiring the earth lead make sure to disconnect the AC power in advance Note AV input devices such as DVD players VCRs or camcorders as well as your computer can be connected to the LCD Display For detailed information on connecting AV input devices refer to the contents under Adjusting Your LCD Display Connecting AV Devices 1 Connect the port of the DVD VCR DVD DTV Set Top Box to the R AUDIO L
87. solution and frequency appropriate to the product Otherwise your eyesight may be damaged When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing Safety Instructions L3 If you continually move closer to the product screen your eye sight may be failing Take a rest for at least five 5 minutes after using the monitor X for one 1 hour This reduces the weariness of your eyes 2 Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations e Otherwise it may fall and cause personal injury and or damage the product e Ifyou use the product in a location exposed to vibrations it may damage the product and result in fire When moving the product turn the power off and disconnect the power plug antenna cable and all the cables connected to the po product Otherwise it may result in electric shock or fire L3 Ensure that children do not hang onto the product or climb up onto the product O The product may fall and cause personal injury or death L3 If you do not use the product for a long period of time disconnect the power cord from the power outlet e Otherwise this may result in overheating or fire due to dust and may result in fire due to electric shock or leakage 2 L3Do not place any heavy items or toys or confectionery
88. sponds to the one you con nected to your computer and click OK 11 Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System 1 Click Start Settings Control Panel and then double click Display icon 2 In Display Registration Information window click Settings Tab and then click All Display Modes 3 Selecta mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK 4 Click Apply button if you see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency Note If there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System To execute X Window you need to make the X86Config file which is a type of system setting file 1 Press Enter at the first and the second screen after executing the X86Config file 2 The third screen is for setting your mouse 3 Seta mouse for your computer 4 next screen is for selecting a keyboard 5 Set a Keyboard for your computer 6 The next screen is for setting your monitor T First of all set a horizontal frequency for your monitor You can enter the frequency directly 8 Seta vertical frequency for your monitor You can
89. tch http www samsung com be fr French SAMSUNG http www samsung com cz 800 726786 Distributor pro eskou republiku samsung Zrt Ceska organiza n slo ka Oasis Florenc Sokolovska3944 7 180 00 Praha 8 8 SAMSUNG 7267864 0818 717 100 http www samsung com dk http www samsung com ie 30 6227 515 http www samsung com fi 01 4863 0000 http www samsung com fr 01805 SAMSUNG http www samsung de 7267864 0 14 Min 06 80 SAMSUNG 726 7864 http www samsung com hu 800 SAMSUNG 726 7864 02 261 03 710 0900 SAMSUNG 0900 7267864 0 10 Min SAMSUNG 7267864 http www samsung com no 0 801 1SAMSUNG 172678 http www samsung com pl http www samsung com it http www samsung com lu http www samsung com nl 022 607 93 33 808 20 SAMSUNG http www samsung com pt 7267864 0800 SAMSUNG 726 7864 http www samsung com sk 902 1 SAMSUNG 902 172 http www samsung com es 678 075 SAMSUNG 726 78 64 http www samsung com se 0848 SAMSUNG 7267864 http www samsung com ch CHF 0 08 min 0845 SAMSUNG 7267864 http www samsung com uk CIS 800 7267 http www samsung com ee 8000 7267 http www samsung com lv 8 800 77777 http www samsung com It 8 10 800 500 55 500 http www samsung com kz ru 00 800 500 55 500 8 800 555 55 55 8 10 800 500 55 500 8 800 502 0000 8 10 800 500 55 500 http www samsung ru http www samsung ua http ww
90. ter sys tem or monitor If that happens press F5 Key Installation Problems The installation of MDC can be affected by such factors as the video card motherboard and the network environment Uninstall The MDC program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MDC Select Setting Control Panel on the Start menu and then double click Add Delete a pro gram Select MDC from the list and then click the Add Delete button Using the Software M Using MDC Multiple Display Conti MDC System Introduction Econ dm Eam RS 232C In R amp 232C In R amp 232C In e em ie ses 2 RS 232C R amp S 232C Out RS 232C Out A Multiple Display Control MDC is an application allowing various displays to be easily and simultaneously operated on a PC RS 232C a standard of serial communication is used for the communication between a PC and a display Therefore a serial cable should be connected between the serial port on a PC and the serial port on a display Main Screen Click Start gt Program gt Samsung gt MDC System to start the program Select a set to see the volume of the selected set within the slider Power On Power Off ME e Main Icons o Select Button a Remocon O Info Grid amp Safety Lock 7 Displa
91. tion Guide OSD Menu gt Set Up gt Safety Screen gt Pixel Time Interval 1 10 hours Recommend 1 Time Period 10 50 second Recommend 50 e Apply the Screen Bar function Symptom Horizontal Vertical Bar with Black Color move up and down FLIGHT TIME Horizontal Bar 023418 20 3U UA102 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Bar Time Interval 1 10 hours Recommend 1 Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not availa ble Apply the Screen Erasing function on Product e Apply the Screen Erasing function Symptom 2 Vertical blocks move with erasing the display Information TIME 02348 20 30 UAT02 21 10 Select method e Instruction Guide OSD Menu gt Set Up gt Safety Screen gt Eraser Time Interval 1 10 hours Recommend 1 Time Period 10 50 second Recommend 50 Note Please check CD s User Guide at OSD Function some model s will not availa ble Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center U S A CANADA MEXICO ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PUERTO RICO REP DOMINICA
92. ult when the selected display stays in Pause mode for an extended period of time You can set the repeat cycle timer by selecting the Interval by hour and Second by second It can be set to Scroll Pixel Bar and Eraser by Screen Type The Input source of MagicInfo works only on MagicInfo model The Input source of TV works only on TV model Setting Second you can set to 1 2 3 4 5 for Scroll Type and to 10 20 30 40 50 for Pixel Bar and Eraser Type The Maintenance Control feature is available only for the displays whose power status is ON Maintenance Video Wall 1 Click on the Maintenance icon in the Main Icon column to display the Maintenance screen pe Muiiple Display Conrol File Remocon Safety Lock Port Selection Help Sefect AIT Clear Alt Idle Video Wall Video Wall On OFF or erg forsee ad O EN ae W Format Full Natural 1 Video Wall A Video Wall is a set of video screens that are connected together so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen 2 Video Wall Screen divider The screen can be divided into You can select a number of screens with a different layout when dividing Select a mode from Screen divider Select a display from Display Selection The place will be set up by pressing a number in the selected mode The program supplied by Samsung supports u
93. um amp Y ENTER Selects either On or Off with the signal control Signal Control MENU gt ENTER Picture 5 gt t ENTER Signal Balance ENTER Signal Control 1 R Gain MENU 7 ENTER Picture 5 5 v 5v 5v ENTER gt Signal Balance ENTER Signal Control ENTER R Gain ENTER 4 ENTER G Gain MENU 7 ENTER Picture 5 v 5v 5v ENTER gt Signal Balance ENTER gt Signal Control ENTER G Gain ENTER 4 ENTER B Gain MENU gt v ENTER Picture 5 5 v5 ENTER Signal Balance ENTER v Signal Control ENTER B Gain ENTER 4 ENTER R Offset MENU ENTER Picture gt gt F 5 5 Y 5 ENTER Signal Balance ENTER v Signal Control 5 ENTER R Uffset ENTER R Offset 4 ENTER G Offset Adjusting the LCD Display MENU 57 5ENTER s5 Picture gt gt F 5 5 Y 5 ENTER Signal Balance ENTER x Signal Control gt ENTER G Offset ENTER G ffset Move 4 ENTER 6 B Offset MENU 2 ENTER 5 Picture 5 v 5 v gt Y gt gt v5 ENTER 5 Signal Balance ENTER Signal Control o Y ENTER B U ffset ENTER B Offset Move
94. w samsung com kz ru Terms AUSTRALIA CHINA INDIA INDONESIA JAPAN MALAYSIA NEW ZEALAND PHILIPPINES SINGAPORE THAILAND TAIWAN VIETNAM SOUTH AFRICA TURKEY U A E Dot Pitch Vertical Frequency 1300 362 603 800 810 5858 Appendix Asia Pacific http www samsung com au http www samsung com cn 400 810 5858 010 6475 1880 HONG KONG 3698 4698 3030 8282 http www samsung com hk http www samsung com in 1 800 3000 8282 1800 110011 0800 112 8888 0120 327 527 1800 88 9999 http www samsung com id http www samsung com jp http www samsung com my 0800 SAMSUNG 0800 726 http www samsung com nz 786 1 800 10 SAMSUNG 726 7864 http www samsung com ph 1 800 3 SAMSUNG 726 7864 02 5805777 1800 SAMSUNG 726 7864 1800 29 3232 02 689 3232 0800 329 999 1 800 588 889 http www samsung com sg http www samsung com th http www samsung com tw http www samsung com vn Middle East amp Africa 0860 SAMSUNG 726 7864 http www samsung com za 444 T7 11 800 SAMSUNG 726 7864 8000 4726 Horizontal Frequency http www samsung com tr http www samsung com ae The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The dis tance between two dots of the same color is called the Dot Pitch Unit mm The screen must be redrawn several times per second in order to create and display an image f
95. y Selection o Port Selection e Control Tools 1 Use the main icons to switch into each screen 2 Allows you to enable or disable the remote control signal receiving function of the display unit Set the Safety Lock function When setting the Lock function you can only operate power and lock buttons on the remote control and set ad The setting for the PC Serial Port can change The original value is COMI Click Select all or Clear to select or clear all displays Use Grid to view brief information on selected display Select a display from Display Selection pe M a pr Use Control Tools to control displays Note The remote control Enable Disable function operates whether or not the power is On Off and this applies to all displays connected to the MDC However regardless of the status at the time the MDC is shut down the remote control signal receiving function of all displays is initialized to Enable when the MDC is closed Port Selection Bp Multiple Display Contro Power On Power Off Volume 10 1 The Multiple Display Control is originally set to COM1 2 If any port other than COM1 is used COM1 through COM4 can be selected in the Port Selection Menu 3 If the exact port name that is connected to the LCD Display using a serial cable is not selected communication will be unavailable 4 The selected port is stored in the program and used for the next program as well Powe
96. y on the screen when setting the graphics card resolution of the computer to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz by using this function Resolution Select you can have the picture displayed on the screen in the specified resolution Note Available in PC mode only 1 Off 2 1024X768 3 1280X768 4 1360x768 5 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 60Hz 1280 x 768 60Hz 1360 x 768 60Hz or 1366 x768 60Hz Power On Adjustment MENU x ENTER Setup yrs Yo YS YS TS YS 5 FF ENTER Power On Adjustment amp ENTER Adjusts the Power On time for the screen Caution Set the Power On time to be longer to avoid overvoltage Adjusting the LCD Display Side Gray Reset MENU v ENTER Setup ps Y gt YS FO FO FO FOF T gt ENTER Side Gray amp Y ENTER Select the brightness of the grey for the screen background 1 Off 2 Light 3 Dark Reverts the product settings to factory defaults The Reset function is only available when PC DVI is being used MENU gt D ENTER Setup Y gt YS YO YS 5 9v Y ENTER Reset Image Reset Lid MENU v ENTER Setup Y Y YO FO OH Y ENTER Reset ENTER Image Reset Image Reset r Move 4 ENTER Note Availab

Download Pdf Manuals

Related Search

Related Contents

  Ford 2003 Explorer Automobile User Manual  2500 kg 2550 kg 75 kg 12,38 kN Raadpleeg uw dealer voor de max  User Manual: 8-bit Digitizers  VSCシリーズ - 有限会社日本雷研ベクトル  N-Tron 1003GX2 User's Manual    Manuale d`uso - Guida rapida R-Log  Untitled  American Standard Jasmine 3821.600 Series User's Manual  

Copyright © All rights reserved. Failed to retrieve file