Philips Digital Terrestrial Receiver DTR2530
Contents
1. Once Only OK Enter the start time using the number keys 2 Change the displayed settings by using the arrow and numerical keys Then you can e Change the date month and day e Set the time starting and end time e The cycle interesting for series and regularly recurring programmes EJ Then highlight OK and press the OK key DE JE Yn El Z T Switching off current timer functions G Note During a timer programme no key is activated To switch off the timer function Hl Press the Standby key 0 A programme message is displayed EJ Press the OK key A message telling that the Timer is deleted mi 5 8 Miscellaneous functions Restoring default settings You can reset the device to default settings Your Digital Terrestrial Receiver will have all its settings initialized like there were at the first installation For example all the favourite lists created will be deleted El Press the MENU key By default the item Box Settings is highlighted EJ Press the OK key 3 Highlight the item Restore Factory Settings using the arrow key A or V and then press OK Box Settings Vi Lal This will reset current settings and clear the channel lists Restore Factory Settings Restore the factory settings El Set Yes by using B and then press OK The device carries out a reboot It switches off and shortly afterwards switches on again 24 El Carry out an initial installation Refer t2. e The PIN code is set to 0000 at the factory Take into account the displayed information It will help you to select the correct settings e Selecting and altering the settings is carried out by means of the arrow keys e A displayed window can be closed by pressing the EXIT key Security Receiver Lock Menu Lock Channel Lock Change PIN Restrict use of this receiver with a PIN 25 JE U Z T Receiver Lock Set this option to On if you want to protect your complete device against unauthorized access So at the next switch on the PIN code will be requested the PIN code is set to 0000 at the factory Menu lock Set this option to On if you want to protect your menus against unauthorized access For the next activation of the menu the PIN code will be requested the PIN code is set to 0000 at the factory Channel lock Set this option to On if you want to be able to lock a channel These channels are PIN protected You can only watch them after entering the right PIN code Refer to chapter Creating and Editing channel list Change PIN This option allows you to specify your personal PIN code Press the OK key For this purpose enter the Current PIN code and confirm by pressing the OK key Then enter your New PIN code and then press OK To confirm your new PIN code enter it again and then press OK A confirmation message is displayed Press OK 26 6 Maintenance 6 1 Cleanin
3. 4 2 Using options Some channels occasionally provide sound subtitle and or text options If a channel provides one or more of these options the respective symbol is displayed in the right corner of the information banner when calling up the channel e ITI for sound options e CJ for subtitle options e INFO for text options I O Ca INFO 0800 ARTE It means that a sound subtitle or text selection is available Audio Selection O Francais Deutsch 0800 ARTE How to use the options EB call up the desired channel EJ Press the LI key for audio selection the C J key for subtitle selection or the INFO key for text selection 4 3 Settings EB Press the MENU key to open the main menu The menu item Box Settings is highlighted by default EA Press OK Using your Digital Terrestrial Receiver Box Settings Video Settings Language Settings Menu Settings Miscellaneous Settings Restore Factory Settings Change aspect ratio and video output format EJ Highlight the desired option using A or V El Press OK Notes e In any case observe the information text displayed on the bottom of the screen It will help you to select the correct settings e Selecting and altering the settings is respectively effected by means of the arrow keys A Wand 4 P e A pop up window can be closed by pressing the EXIT key 4 4 Video Settings The video displayed on the TV depends on e Screen format e Digital Terr
4. number and the channel name In addition the time is displayed on the lower left edge of the information banner The display bar on the right next to the time graphically indicates the programme time that has already elapsed The lower menu line displays the current and the next programme including its broadcasting time After a few seconds the information banner is automatically hidden 12 Note You can define the display time of the information banner for yourself or completely prevent the automatic display To do so see the Menu settings chapter Extended information banner While the information banner is displayed on the lower screen edge you can call up the extended information banner by pressing the INFO key again The extended information banner supplies further details with regard to the current programme Now 13 55 15 35 1 40 Movie gt 0800 ARTE I I Ga INFO i Z z Notes e If the text is more extensive it is distributed to several pages By repeatedly pressing the OK key you browse the next pages arrow keys A and V are also possible e If you press the INFO or arrow key information on the next programme is displayed By pressing the arrow key lt you return to the information on the current programme Note The extended information banner is not automatically closed Press the EXIT key in order to close the extended information banner Using your Digital Terrestrial Receiver
5. wake up your Digital Terrestrial Receiver from standby press one of the following keys and wait a few seconds e on the remote control e P P on the remote control e Any numerical key of the remote control z Note In order to reduce power consumption switch your Digital Terrestrial Receiver to standby mode whenever you are not using it For maximum energy saving we recommend you to switch off the Digital Terrestrial Receiver by unplugging the AC adaptor of the Digital Terrestrial Receiver if you are not using it for a long time Channel selection To change channels use P P or the numerical keys of the remote control Press P lt P BACK to return to the previously tuned channel 11 JE U zj O Z T Volume Control To decrease or increase the volume level use the volume keys VOL A change of volume is shown on screen using a bar graph To mute the sound press the nk key The nk icon in the bar graph indicates audio mute This icon disappears after a few seconds To restore the sound press the K key again or the volume keys VOL B Note The volume level is controlled from your TV set It can also be controlled using your TV remote control Displaying information banner Every time you change channels the information banner is displayed To display the banner anytime press INFO To exit it press EXIT W 0800 ARTE The information banner displays the selected channel memory
6. work try unplugging your Set Top Box and then plugging it in again If this does not work contact either your supplier or a qualified repair technician Never attempt to repair your set top box yourself Frequently asked questions Contact information DTR 2530 Serial number UNITED KINGDOM Philips CE The Philips Centre Surrey Phone 0870 900 9070 ps tn Contact information Trademarks and partner logos Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Ley 100 recycled paper Qe 100 papier recycle 31 PHILIPS 2008 Koninklijke Philips Electronics N V All rights reserved Document order number 3111 176 54421
7. 05x245x65mm Weight 0 98 kg Weight incl Packaging 1 78 kg Accessories elncluded Accessories Mains cord Remote Control User Manual SCART cable eBatteries 2 size AAA Tuner Reception Transmission Demodulation type COFDM 2K 8K MPEG 2 DVB compliant Network MFN SFN QAM QPSK DVB Terrestrial eInput frequency range 474 862 MH 2 SE Yn Z T 10 Frequently asked questions This chapter gives the most frequently asked questions and answers about your Digital Terrestrial Receiver Connection On screen display working but there is no reception Check the installation Intermittent reception Check all connections and cables The picture is not sharp and on screen text is difficult to read e Change the TV scart output setting to RGB from the System settings screen e Refer to your TV user manual e Use the scart cable supplied with the Digital Terrestrial Receiver Set up The LED on the front panel does not light up e Check that the AC adaptor is correctly connected Disconnect this cord and reconnect it to ensure it is in place e Check that power is available at the wall socket The remote control does not operate the Digital Terrestrial Receiver e Make sure the Digital Terrestrial Receiver is on e Make sure you are pointing your remote control at the front panel of the Digital Terrestrial Receiver e Check the batteries in your remote control You cannot find all the chann
8. DIK 2030 www philips com support For support call 0870 900 9070 EN Digital Terrestrial Receiver 2 PHILIPS Table of contents 2 1 2 3 24 2 5 3 1 3 2 33 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 Important Your Digital Terrestrial Receiver What s in the box What you also need Digital Terrestrial Receiver overview Main menu overview How to read this manual Getting started Prepare Connect Install Using your Digital Terrestrial Receiver Watching live TV Using options Settings Video Settings Language Settings Menu Settings Miscellaneous Settings Restore Factory Settings CO CONN OD OW O CO 11 11 13 13 13 15 15 16 16 Use more of your Digital Terrestrial Receiver 17 Digital Terrestrial Receiver full overview17 Remote control full overview Using channel list Creating and Editing channel list Extended installation EPG Timer Miscellaneous functions Radio Security Maintenance Cleaning Replacement Disposal 18 19 19 21 22 23 24 25 25 26 26 26 26 10 Accessories and connections Recorder connection Audio connection Guarantee and service Technical data Frequently asked questions Contact information Trademarks and partner logos 28 29 30 31 31 SE U El O Z T 1 Important Take time to read this User Manual before using the Digital Terrestrial Receiver It contains important informa
9. El Press the MENU key 2 Highlight the second menu item Search for Channels using the arrow key A or V and then press OK AN Search for Channels Q Antenna settings Automatic Search Pan Manual Search CN 8 A complete search which will find all available Q channels on the common frequency range After the first installation refer to chapter Install it may be required to search for channels again or to add specific channels that are additionally broadcast Note In order to carry out an extended installation you have to reset the device to its default settings Refer to chapter Restoring Factory Settings Two options are available Automatic Search This scan mode is usually the appropriate one because normally all channels are found automatically 1 Highlight Automatic Search and then press OK Use more of your Digital Terrestrial Receiver Automatic Search K21 474 0 MHz Start Frequency End Frequency K68 850 0 MHz Channels to search for All Press lt OK gt to start scanning for channels EJ Press the OK key to start the automatic scan mode Scan completed 85 TV channels and O radio channels have been found Save new channels Yes add new channels 3 Using lt or gt choose whether e The channels found are to be added to the old list standard setting e The old channel list is to be overwritten e The new found channels are to be discarded EJ Press the OK ke
10. Return to the previously tuned channel F H LIST FAV key Favourite lists Channel up down Select the next or previous channel G J K Mute or restore the sound H K Alphanumeric keypad L RADIO Toggle between TV and Radio M FI Audio selection N TIMER O Contextual keys J P INFO Display the Information Banner Q EXIT Close Menu Info Banner K R Volume control Turn the sound level up down S MENU Open Close menu v ZZ U OF gt m Remote control unit 18 Use more of your Digital Terrestrial Receiver 5 3 Using channel list EN Press LIST FAV to call up the channel list Se Note If no other window on the screen is opened you can also call up the channel list by pressing the OK key This list contains all TV channels the device has found and stored during automatic channel scan ti TV Channels 80 UI 0844 Geographical Zone 0845 PPV Imp and Geogra 0846 France 2 Ee 0847 France 5 0848 ARTE 0849 LCP 0850 France 3 xk 0851 3 8 bars Color HD 0852 France O xk 0848 ARTE Se Note Press the LIST FAV key again the favourite list is displayed This individual channel list only contains the channels you have chosen to be as your favourite channels For further information on this refer to chapter Defining channels as your Favourites Favourites are marked with a star in the channel list EJ Observe the following to navigate through the channels e U
11. a specific time For example it can allow a recording with a recorder device The device then automatically switches on in the standby mode If the device is already switched on the device automatically switches to the selected programme Note Remember to program your recorder device to the respective time Adding a programme to timer list The timer function is included into the timer list via the EPG Refer to previous paragraph EB Open the EPG and highlight the desired programme EJ Press the TIMER key By default the answer to the confirmation question is Yes TV Channels Programme Guide Thu 18 00 Rex 0850 Set a Timer for the selected programme EB 24h Ge 24h Now EJ Press the OK key The window is closed and the selected programme is stored in the timer list Use more of your Digital Terrestrial Receiver Editing timer list During the normal programme replay press the TIMER key to open the timer list Timer Thu O7 Feb 17 30 19 00 1 30 LCP Delete CUP Edit Delete all Deleting a programme s from the timer list EB Select the desired programme EJ Press the respective coloured key e Red the selected programme is deleted e Yellow all programmes are deleted El Choose Yes using the arrow key EJ Press OK to confirm the request Timer editing EB in the Timer list select the desired programme and press OK Edit Timer Station February 07 17 30 until 19 00
12. annels 25 TV Favourites 0001 LCP 0002 NR 1 2 0005 TF1 0004 Virgin 1 7 0005 ARTE 0006 BFM TV Channels 0800 ARTE 0801 BFM TV 0802 CANAL 0805 CANAL 0804 CANAL CINE 0805 CANAL SPORT 0806 Direct 8 0807 Eurosport Fra 0808 France 2 em Lock ee Filter channels T3 Add to favourites Change list EJ Press the yellow key to access the filter options You may filter the channel list by criteria such as free or scrambled broadcasts or by network provider You may sort the list by numbers or alphabetically Use the arrow keys to navigate inside the Filter channels screen H Press the green key to lock a channel A padlock appears next to the channel name Note To be able to lock a channel the Channel lock setting has to be active Refer to chapter Security Defining channels as your favourites The favourite list contains all channels you have defined as favourites From this list you can create a personalized channel list EN Select the channel you want to indicate as a favourite using the arrow key A or V EJ Press the OK key to add the channel to the favourite list A star indicates that the channel is in a favourite list 3 Repeat this process with all channels you want to indicate as favourites EJ After you have carried out the desired settings press the EXIT key in order to close the window H Save the changes by pressing the OK key 20 S Note The previously described funct
13. corder to the RF input of your TV set using a coaxial cable Bl Connect a scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver Gg Plug your Digital Terrestrial Receiver to the mains using the supplied power adaptor A Warning To be able to record digital television you must make sure the Digital Terrestrial Receiver is on Accessories and connections 7 2 Audio connection Ss a PRILIPS Ze Dn A Digital ital Terrestrial Receiver UHF Aerial E io equipment Analogue connection Connect the L R audio outputs of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a double CINCH cable not supplied Consult the user manual of your audio equipment to choose the proper analogue audio inputs Digital connection Connect the SPDIF output of the Digital Terrestrial Receiver to the relevant input of your audio equipment using a single CINCH cable not supplied Consult the user manual of your audio equipment to choose the proper digital audio input 2 SIE U El O Z T 8 Guarantee and service English Dear Customer Thank you for purchasing this Philips product For the Philips warranty applicable to this product we refer you to the Philips website www philips com guarantee In the event you do not have an Internet connection please contact your local Philips Consumer Care C
14. e maintained 8 Using the arrow key lt or gt you define the channels to be searched for All channels or channels that are Free to air only E Then highlight the OK field using the arrow key and press OK to start the channel search The window displayed provides information on the progress of the channel search Scanning 12 K27 522 0 MHz 8 MHz Frequency Bandwidth TV 10 France 4 Signal Strength 95 me Ea ws NT1 No Name 1279 Quality ennn Press lt EXIT gt to stop scanning G Note By pressing EXIT you can stop the scan mode at any time Getting started M As soon as the scan is completed a window is displayed Press OK to close it fH Press OK again Now all the available channels are scanned and registered on your Digital Terrestrial Receiver Note If the signal quality is poor a message prompting you to check your antenna cable is displayed Check your cable connections and scan for channels again If you do not receive channels that should be available check also the Coverage of your area See http www freeview co uk Using your Digital Terrestrial Receiver 2 Using your Digital ea eoo Once you have connected your Digital Terrestrial Receiver use the remote control to operate the basic frequently used functions such as switching on and off changing channels and altering the volume 4 1 Watching live TV Digital Terrestrial Receiver wake up To
15. ect a language for the subtitles Subtitle Language 2 Select an additional subtitle language for the subtitles Note If the desired programme is not available in the main subtitle language the language used will be the second subtitle language Subtitles Automatic Set this option to On if you want to automatically show broadcast subtitles in the selected caption language by default this option is set to Off Menu Settings Info Banner Duration Info Banner Automatic Menu Transparency None Set the exposure time of the channel information bar 4 6 Menu Settings Info Banner Duration With this option you define for how long the information banner is displayed when you switch to another channel If you never want the information banner to appear when changing channels select None If you want it to appear all the time select Permanent E E U El O Z T Info Banner Automatic When a new programme begins the information banner is automatically shown as a default If you want to remove this option select Off eS Note This option is only available if the value set under Info Banner Duration is at least 4 seconds Menu Transparency With this option you set the transparency of the OSD If you have difficulties to read the OSD with transparent setting select None 4 7 Miscellaneous Settings Miscellaneous Settings Time Zone Adjustment q Time Zone GMT Summertime DST Postc
16. el and select the desired function Caution Do not mix batteries or keep them in the remote control for long periods of time without use Batteries must not be disposed of with your household waste but to a local separate battery collection system Do not dispose of batteries in a fire Insert the Smart card To insert the smart card e Open the smart card door on the right side of the front panel e Insert the smart card into the smart card slot as far as it will go The end of the card will be visible from outside the slot A Warning Insert the Smart card with the chip facing down Getting started 3 2 Connect Danger Risk of electric shock Make sure all the devices are disconnected from the mains before making any connections SCART connection TV set to AC outlet Digital Terrestrial Receiver UHF Aerial EN Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver EJ Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the RF input of your TV set using a coaxial cable El Connect the supplied scart cable to the scart input of the TV set and to the TV scart socket at the rear of the Digital Terrestrial Receiver 4 Plug your Digital Terrestrial Receiver to the mains using the supplied power adaptor aE U zj O Z T 3 3 Install Press on the remote control and wait a few seconds t
17. els you think should be available Try re tuning the device following the relevant steps in chapter Install If you are still missing channels call your customer service adviser 30 Some radio stations cannot be received from time to time These services are not transmitted 24 hours a day and can sometimes be unavailable This is not a fault You have forgotten your PIN Code When prompted for your PIN Code enter the Master PIN Code This will allow you to proceed as well as reset the current PIN Code to its default value default is 0000 The Master PIN Code is 8111 Keep this code secret to prevent others from using it Installation No sound or picture but the front panel LED is lit in green e Check the connections at the wall socket and Digital Terrestrial Receiver e Press on the remote control twice or press P P The picture on some channels seems to have been stretched or squashed Check the Digital Terrestrial Receiver TV shape setting following the information in paragraph Video Settings If you have a wide screen TV you may also need to check the settings on your TV The display format being managed by the Digital Terrestrial Receiver set your TV to full screen or to the similar equivalent setting refer to the user manual of your TV set The order of the channels has changed Refer to chapter Miscellaneous Settings to change the order again GD If none of the above suggestions seems to
18. ence Danger e The Digital Terrestrial Receiver and AC adaptor do not contain any user serviceable parts Do not attempt to open them All maintenance work must be carried out by qualified services centres e Make sure that children do not place any foreign objects in any of the openings Q Warnings e Before connecting the AC adaptor to the mains check that the mains supply voltage corresponds to the voltage printed on it If the mains voltage is different consult your dealer e The AC adaptor has been designed for indoor use only e Is it recommended to unplug the AC adaptor from the mains during lightning storms e Periodically inspect the AC adaptor for damage Do not use if damage is found Always refer to qualified services centres e To prevent fire or shock hazard do not expose the Digital Terrestrial Receiver to rain or moisture e The Digital Terrestrial Receiver should be placed on a firm surface and the ventilation openings must not be covered with items such as newspapers table clothes curtains etc e Do not install the Digital Terrestrial Receiver near heat sources such as radiators stoves or other apparatus that produce heat Protect it from direct sunlight e When installing the Digital Terrestrial Receiver ensure there is a gap of approximately 5 cm around the Digital Terrestrial Receiver to enable air to circulate freely and prevent overheating e Leave accessible the AC adaptor in case emergency shutdown is req
19. entre Contact details are given in the Consumer Care Centres list hereafter 28 Guarantee and service J Technical data The product complies with the following European council Directive 2006 95 CE Specifications Connectivity e Terrestrial antenna interface RF in IEC 169 2 RF out bypass IEC 169 2 eAudio Output Digital Optical TOSLINK eTV scart out CVBS RGB Audio L R eVCR scart out Audio L R CVBS Convenience Ease of Installation Autoinstall Parental control Lock with PIN code Child timer Programmable Events 8 eUser Interface Automatic program list update Multiple subtitles supported On Screen Display on TV Software upgrade over the air TV and Radio mode Now amp Next ESG 7 day Electronic program Guide System Specifications Flash memory size 2 MB eRam size 16 MB SDRAM Video Decoding e Aspect Ratio 16 9 4 3 Letterbox 4 3 Pan Scan Compression Format MPEG 2 MP ML std definition Conditional access system Mediaguad card not supplied Subscription needed for pay TV eResolution up to 720 x 576 interlaced De scrambling Smart Card reader Audio Decoding Compression format MPEG layer I II eSound system Dolby Digital Bitstream out Mono Stereo Technical data Power eMains power 230V AC 50Hz to 12V DC Power consumption 7 W Standby power consumption 5W Dimensions eProduct dimensions WV x H x D 240 x 44 x 145 mm Carton dimensions WxDxH 3
20. estrial Receiver setting e Broadcast content format setting Screen Format Video Settings Screen Format 4 3 Picture Scaling Letterbox 16 9 TV Output Format RGB VCR Output Format Video CVBS AFD Automatic On Restore Default Settings OK Select video output to match the screen format of your TV You can select screen format according to the TV you have e 16 9 Widescreen TV format e 4 3 format o ENGLISH Picture Scaling This option allows you to determine the scaling of the picture The effect of a selected option is visible in the background instantly If you have chosen 16 9 format the next three picture scaling are available Pillarbox Reduces the picture in 4 3 mode for 16 9 format TV to scale and for this purpose inserts two black bars left and right on the screen Zoom Presents the images in the 4 3 format in a screen filling manner Therefore the top and bottom picture border is cut off Automatic The scaling is automatic If you have chosen 4 3 format the next three picture scaling are available 14 Letterbox 16 9 Reduces films in 16 9 mode for 4 3 format TV to scale and for this purpose inserts two black bars above and below on the screen Pan amp Scan CCO Presents films in the 16 9 format in a screen filling manner With regard to 4 3 TV the left and right picture borders are cut off Letterbox 14 9 This represents a compromise between the other two set
21. g For cleaning use a soft damp not wet cloth Never use any abrasive cloth and aerosol cleaners 6 2 Replacement The Digital Terrestrial Receiver does not contain any user serviceable parts Do not attempt to open it All maintenance work must be carried out by qualified service centres 6 3 Disposal Your product is designed and manufactured with high quality materials and components which can be recycled and reused Please inform yourself about the local separate collection process for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health Maintenance 7 Accessories and connections 7 1 Recorder connection EN Connect the supplied scart cable to the Er x Je Zl a Me AC outlet ANTIN EXT 1 EE x2 Recorder ANT our VCR scart socket at the rear of the Digital Terrestrial Receiver and to the scart input EXT1 of the recorder EJ Connect the aerial cable from the wall socket to the RF IN socket at the rear of the Digital Terrestrial Receiver El Connect the RF OUT socket at the rear of the Digital Terrestrial Receiver to the ANT IN socket at the rear of the recorder using a coaxial cable El Connect the ANT OUT socket at the rear of your re
22. ial Receiver checks whether a software update is available If a new software is available you will receive a message at the next switch on of your Digital Terrestrial Receiver to accept the update Then the software update starts You can also start the search process manually EN Press the MENU key 2 Highlight Technical Information using the arrow key A or V and then press OK 3 Highlight System Information using the arrow key A or V and then press OK System Information Hardware Version 0017 0003 13C2 0020 System Key 1201 1967 FFFF FFFF MAC Address n a Product Philips DTR 2530 Software Version 1 69 05 Jan 8 2008 10 44 Update Software OK Press lt OK gt to start the search for a new software version EN Press OK to start the software update Use the arrow key lt or B to select Yes EJ Press OK to start the update 5 9 Radio eS Note Digital radio programmes are not broadcast in all countries In this case a message indicating that the radio list is empty appears KN ifa digital radio programme is broadcast in your country press the RADIO key to receive it Use more of your Digital Terrestrial Receiver EJ In order to view the TV programme again press the RADIO key again 5 10 Security EN Press the MENU key EJ Highlight the sixth menu item Security using the arrow key A or V and then press OK EJ Enter the PIN code Restrict access to your receiver with a PIN 5 Notes
23. ions are also provided to you with regard to the radio channel list Press the RADIO key to call up the overview of the radio channels You can return to the TV channel list by pressing the RADIO key again Shifting channels in the favourite list You can individually set the sequence of the channels within the channel list Sort TV Channels 80 TV Favourites 1 0001 ARTE 0002 Virgin 17 0003 France 0004 I gt TELE Channels 0855 4 Premiere HD 0854 Direct 8 0855 BFM TV 0856 I gt TELE 0857 Virgin 17 0858 Gulli 0859 France 4 0860 CANAL 0861 CANAL CINEMA Press the arrow key B to highlight and edit the favourite list Highlight the channel you want to shift using the arrow key A or V Press the OK key to confirm the channel to be shifted Shift the highlighted channel to the desired position using the arrow key A or V Press the OK key to store the channel at the desired position Press the EXIT key to save Press the OK key to save the changes HO OO 0 B Deleting channels in the favourite list Press the arrow key B to highlight and edit the favourite list Highlight the channel you want to delete using the arrow key A or V Press the red coloured key Delete To delete all the channels in the favourite list press the yellow coloured key Delete all Press the EXIT key to save Press the OK key to save the changes Use more of your Digital Terrestrial Receiver 5 5 Extended installation
24. l D Alphanumeric keypad PHILIPS Remote control unit Your Digital Terrestrial Receiver 2 4 Main menu overview EN Press the MENU key to access the main menu Box Settings E EN Q Q Change settings for picture sound menus and location EJ Use the arrow keys A V to navigate through the different options EJ Press OK to validate your choice e Note For menu full overview see chapter 5 2 5 How to read this manual This User Manual contains all informations you need to e Set up all the available channels e Use correctly your Digital Terrestrial Receiver Each symbol below has a specific meaning Danger Describes situations of injury or loss of life e A Warning Describes actions that may cause damage to the product Q Caution Describes the actions required to avoid dangerous or illegal situations Note Additional information Tip Information that is useful to know but not essential to the task For example information about alternative use 3 _ Getting started In this chapter the basic steps to get you started are described 3 1 Prepare Prepare the remote control 1 Open the battery compartment EJ insert the two batteries supplied according to the indications inside the compartment Getting started El Close the battery compartment Note Point the remote control directly at the remote sensor on the front pan
25. o chapter Install Displaying channel and system information adjusting the antenna This function solely serves to supply information on one channel However you can use it for adjusting your antenna and for improving the television reception EN Press the MENU key to access the main menu El Highlight the fourth menu item Technical Information using the arrow key A or V and then press OK By default Channel Information is highlighted E Press OK ARTE Channel Information Frequency K35 586 0 MHz Parameters FFT Guard QAM 64 CodeRa Network 0001 20FA Provider GR1 r seau num rique terrestre Service ID 261 Audio PID Teletext PID 0 Video PID Signal Strength Signal Quality 4 Adjust your antenna so that the two specifications Signal Strength and Signal Quality display a preferably high value Note Depending on your antenna you can possibly carry out settings on your antenna Bl Press the EXIT key 6 Highlight System Information using the arrow key A or V and then press OK Here you find technical information on your device This information normally is only relevant with regard to support Press the EXIT key three times to return to the TV programme Use more of your Digital Terrestrial Receiver Carrying out software update Note For this purpose your Digital Terrestrial Receiver has to be set to standby mode Every night between 1 am and 5 am your Digital Terrestr
26. o switch the receiver on The receiver is on the LED is green The receiver is in standby mode the LED is red During a software loading the LED is blinking At the first installation the First Time Installation window appears First Time Installation Country United Kingdom Postcode OK Screen Format 4 33 TV Output Format Active Antenna Press lt UP gt lt DOWN gt to navigate Press lt OK gt to continue 1 Highlight the Country field using the arrow key A EJ Select the desired language using the arrow key lt or P Note Read the information messages displayed on the screen They will help you to set the correct values El Highlight Postcode using the arrow key EJ Press OK and enter your postcode H Then successively set the desired values In doing so observe the following By using the arrow key A or V you switch between the individual setting possibilities e By using the arrow key lt or B you change the displayed values EJ Then highlight the OK field using the arrow key V and press OK 10 The Automatic Search window is displayed Automatic Search Start Frequency K21 474 0 MHz End Frequency K68 850 0 MHz Channels to search for All Press lt OK gt to start scanning for channels If desired change the values for the Start and End Frequency using the arrow key lt 4 ore Note The displayed values for the Start and End Frequency can normally b
27. oadcasting services that do not offer any EPG information e Due to the progressive technical development more and more broadcasting services will extend this offer in the future EN Select the desired channel EJ Press the EPG key to call up the electronic programme guide El Close the EPG by pressing the EXIT key TV Channels Programme Guide Thu ECH ECN EEC 0847 France 2 Le Renard Le Renard 0848 France 5 Versailles retrouv Rio la beaut O849 ARTE Tous les h 0850 LCP Questions d actualit au gou Les travaux 0851 France 3 Questions aug C t jardins Thu 07 Feb ARTE 15 55 17 25 Il tait un p re Il tait un p re Movie Drame 1942 24h 24h Now EPG Gi Set Timer EPG offers the following functions e If you require more information on a programme highlight it using the arrow key A or V and then press INFO e You can select programmes earlier or later in the day using the arrow key B or 4 e Change to the programme of another day using the green next day or the red button previous day e If you want to adopt a programme into the timer list highlight it and press the TIMER key Confirm the request by selecting Yes and pressing the OK key Note Detailed information on the Timer can be found in the next paragraph Use more of your Digital Terrestrial Receiver 5 7 Timer By means of the timer setting you can switch your Digital Terrestrial Receiver on and off at
28. ode OK Active Antenna On Audio Format Stereo Dolby Digital Automatic On Sorting AtoZ Automatic Enable Disable automatic detection of your local time zone Time Zone Adjustment With this option you can select whether the local time offset with regard to Greenwich mean time is to be set automatically or if you want to specify it yourself Time zone GMT Select the entry GMT 01 00 for Germany and Central Europe for example time difference with regard to the Greenwich mean time Summertime DST Set the menu item summer time to Off if it is not summer time at the moment 16 Se Notes e If the Time Zone Adjustment is set to Automatic the Time zone and the Summertime DST are defined automatically and thus not available e The Digital Terrestrial Receiver obtains the information regarding summer time for the currently selected channel Postcode Select your postcode Audio Format This option provides mono and stereo formats for the audio output Dolby Digital Automatic This option enables automatic detection of Dolby Digital audio channels Two options are available e Off if you only have connected a recorder device e On if you have connected a Dolby Digital Home entertainment system Sorting This option modifies the appearance and behaviour of the channel lists 4 8 Restore Factory Settings You can reset the device to default settings Your Digital Terrestrial Receiver will have all its set
29. se A or V to highlight the next or the previous channel in the list e Use lt or P to skip eight positions in the channel list respectively backwards or forwards e Use the Page up Page down keys to skip eight positions in the channel list respectively backwards or forwards El Press the OK key after you have selected the desired channel Use more of your Digital Terrestrial Receiver Notes e The programme of the selected channel is displayed in the background The channel list remains opened for several seconds During this time you can select another channel by using the arrow keys or press the OK key in order to close the channel list immediately e If the device is switched to radio mode you can also carry out the previously described actions in the same manner for the stored radio channels JE Ta O Z T 5 4 Creating and Editing channel list Sometimes the channel list may appear too complex or may contain channels that you are not interested to watch anymore Via the main menu you can edit and create your own favourite list EN Press the MENU key EJ Select the third menu item Sort Channels using the arrow key A or V and then press OK Sort Channels Favourites 1 Favourites 2 Favourites 3 Favourites 4 Choose the channel list to be edited and press lt OK gt to continue EJ Select one of the Favourite lists using the arrow key A or V and then press OK 15 Sort TV Ch
30. tings Small black bars are inserted and only a bit of the left and right picture borders is cut off Using your Digital Terrestrial Receiver TV Output Format For the video output TV the formats RGB Video CVBS and S Video Y C are provided Here RGB is the correct selection in most cases VCR Output Format Here you can choose between Video CVBS and S Video Y C AFD Automatic The broadcast picture format may deviate from the picture format to be displayed AFD recognizes and corrects the presentation if you choose On Restore Default settings With this function you reset the configuration for the picture settings to predefined default values In most cases they allow for an acceptable image and language reproduction 4 5 Language Settings With this option you set the language of the on screen display OSD Language Settings Audio Language English Audio Language 2 French Frangais Subtitle Language English Subtitle Language 2 French Fran ais Subtitles Automatic On Choose your preferred audio language It may not be available on some channels Audio Language Select the language broadcast for the programmes Audio Language 2 Select an additional language broadcast for the programmes Using your Digital Terrestrial Receiver Se Note If the desired programme is not broadcast in the main audio language the language used will be the second audio language Subtitle Language Sel
31. tings initialized like they were at first installation This will reset current settings and clear the channel lists Restore Factory Settings Using your Digital Terrestrial Receiver gt Use more of your Digital Terrestrial Receiver This chapter gives a complete description of the functionalities of your Digital Terrestrial Receiver 5 1 Digital Terrestrial Receiver full overview Main unit backside Main unit A IR Receiver B Status led Green the receiver is on Red standby mode Blinking software update in progress C Smart Card slot Use more of your Digital Terrestrial Receiver Izv DC RIGHT LEFT 12W max OOK o a 2 a BE S PDIF AUDIO OUT RF IN RF OUT Main unit backside A TV scart Output to connect your TV set B VCR scart Output to connect your video recorder C Optical digital audio output D L R audio Left Right analogue audio outputs E RF IN Input to connect your aerial cable from the wall socket F RF OUT Output to connect your receiver to aVCR TV set another receiver G Power supply Output to connect the AC adaptor Safety extra low voltage 17 SE U j O Z T 5 2 Remote control full overview Remote control unit A Switch on or to standby mode B C J Subtitle C TEXT not applicable Ea Page up D Ey Page down E EPG Open Close the Programme Guide F Navigation keys Move up down left right OK confirm the selection G P lt P BACK
32. tion and notes regarding how to operate it Disposal of your old product Your product is designed and manufactured with high quality materials and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product or its packaging it means the product is covered by European Directive 2002 96 EC Please inform yourself about the local separate collection process for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste The correct disposal of your old product will help prevent potential negative consequences for the environment and human health The Material recyclability symbol affixed on package cardboard and user manual means these parts are recyclable So do not dispose of them with your normal household waste The Material recyclability symbol affixed on plastic packaging parts means these parts are recyclable So do not dispose of them with your normal household waste The Green Dot affixed on cardboard means PHILIPS pays a financial duty to the Avoidance and Recovery of Packaging Waste organization 4 Important Your receiver is powered using an AC adaptor The Digital Terrestrial Receiver has been manufactured to meet the appropriate safety standards but the instructions below must be followed to operate it safely These instructions must be kept for future refer
33. uired e Do not place any combustible objects on the Digital Terrestrial Receiver candles etc e No objects filled with liquids such as vases shall be placed on the unit The Digital Terrestrial Receiver shall not be exposed to dripping or splashing Should this happen disconnect the AC adaptor from the mains and consult qualified services centres Refer also to the cautions throughout this manual Important 3 SE Yn El O Z T 2 Your Digital Terrestrial Receiver Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble free service 2 1 What s in the box gs ooo a R CE wers 0000 0000 EO 0000 Z y Digital Terrestrial Receiver User manual Remote control and 2 batteries SCART cable AC Adaptor Leaflet Smart card Q Caution Plastic bags can be dangerous To avoid suffocation keep the bag away from babies and children 6 Your Digital Terrestrial Receiver 2 2 What you also need aE U zj O Z T Coaxial cable 2 3 Digital Terrestrial Receiver overview Main unit A IR Receiver B Status led C Smart Card slot Main Unit Main unit backside A TV B VCR C SPDIF optical D L R AUDIO OUT analogue E RF IN Main unit backside F RF OUT G Power Safety extra low voltage ODO Remote control unit A Standby B Navigation keys C Volume channel contro
34. y Manual Search This type of scan mode enables the specific search for an individual channel This is particularly interesting if you only want to include one individual channel into your channel list and you know the accurate information on the channel and frequency 1 Highlight Manual Search and then press OK 21 ENGEISE Manual Search Frequency g K21 4740 MHz D Frequency MHz 474 0 Channels to search for All OK Select the frequency for the search 2 Successively select the adjustable values using the arrow key A or V e The desired Frequency is set with the arrow key 4 or P e The frequency in MHZ is entered via the numerical keys of the remote control E Choose whether All channels or channels that are Free to air only are to be searched for El Then highlight OK and press the OK key to start the manual scan mode e If some channels were found the same message as the one in the automatic scan mode will be displayed Refer to previous paragraph e If no channel was found a message will be displayed No channels have been found H Press the OK key 5 6 EPG The electronic programme guide EPG offers you an overview of all programmes to be broadcast in the coming week on the current channel 22 Notes e Not all channels offer an extensive EPG e Many broadcasting services broadcast the current day programme but do not offer detailed descriptions e There are br
Download Pdf Manuals
Related Search