Philips 37PF7321 37" LCD HD Ready widescreen flat TV 37" Silver Frost Bi-Color,Tempered Glass Deco Front
Contents
1. For more details on connection to the PC equipment see guide Connect Check whether the source is correctly selected Press Av button to enter Source list and select the correct source Check whether you have configured the computer on a compatible display resolution see TV as PC Monitor on page 18 Check graphic card setting of PC Check whether power cord is properly connected Press the P key on the remote control to do a channel up and then press the P key to do a channel down Change PC refresh rate to 60 Hz HDMI High Definition Multimedia Interface Provides an uncompressed all digital audio video interface between the TV and any HDMI equipped audio video component such as set top box DVD player and A V receiver HDMI supports enhanced or high definition video plus two channel digital audio NTSC NTSC is the analog television system in use in Korea Japan United States Canada and certain other places mostly in the Americas see map It is named for the National Television System s Committee the industry wide standardization body that created it PAL Phase Alternating Line is a colour encoding system used in broadcast television systems in large parts of the world HDCP High bandwidth Digital Content Protection HDCP encrypts the transmission of digital content between the video source or transmitter such as a computer DVD player or set top box and the digital display2. Description of the settings Lock Channel Lock individual channel A keylock symbol appears besides the locked channel number or the symbol for an unlocked channel number Press key to enter channel lock mode and A keys to select the channel to lock or unlock Press 4 keys to lock or unlock selected channel To exit from Lock Channel mode and return to Child Lock menu press key Change Code Key in your new four digit code using the Digit 0 9 keys and confirm by keying in the new four digit again Clear All Press key to unlock all locked channels Lock All Press key to lock all locked channels Note If you switch on the TV set and select a channel that has been locked you need to key in the Access Code to enter the selected locked channel To unlock the channel go the Lock Channel in the Child Lock menu and press 4 gt keys until you see this symbol gf The PIP Picture in Picture feature allows you to call up a PIP screen of the PC Personal Computer or HD High Defintion device while watching a TV programme B cO E ures For description of PIP menu items and how it works refer to the section PIP Picture in Picture on pages 21 22 13 14 Screen Formats The pictures you receive may be transmitted in 16 9 format wide screen or 4 3 format conventional screen 4 3 pictures sometimes have a black band at the left and right of the scr
3. Remote Control keys DVD or AUX The remote control also allows you to control the main functions of some Philips DVD players Press the key to select the required mode DVD or AUX The remote control indicator lights up to display the selected mode It switches off automatically after 20 seconds if left idle The mode automatically returns to TV mode The following keys are operational depending on the equipment standby 4 fast rewind n stop play fast forward record e e v Note Functions not available to DVD R device gt MENU display and exit menu P programme selection navigation and adjustments confirms selection digit keys Menu Language Language Before you proceed to do Auto Store of channels select your desired TV menu language Language lt English 0 Selecting the language If you have selected the wrong language for one reason or another and do not understand the language to operate the set do the following to bring you back to your preferred language press 08 key to exit the existing menu press MENU key to access the TV menu Press MENU J key on the remote control to access the TV menu on the screen Press A w keys repeatedly until Install is selected Press key to access Install menu Language is highlighted Press 4 keys to select your language To return to
4. Select the Source Press key to display Source List Select CVI 2 VGA Source CVI 2NGA Press gt key to switch to the selected source Accessing the PC menu Q Press key to display menu Press v key to select Features Press gt key to access Features menu Q Press v key to select Mode Selection If HD is displayed at Mode Selection press gt key to select PC Press key to display PC menu Press A key to select the PC settings Picture Audio Selection or Features o 8 O Press 4 key to select or adjust setting Description of Picture settings Brightness Adjusts the brightness Contrast Adjusts the contrast Horizontal Adjusts the horizontal position of the image Vertical Adjusts the vertical position of the image Colour Temp Changes the colour setting Cool bluer Normal balance or Warm redder Description of Audio Selection Select the audio from the TV or PC HD Press 4 key to select the audio source Description of Features Phase Eliminates the horizontal interfeing lines Clock Eliminates the horizontal interfeing lines Format Select between full screen or native format of the PC screen Press 4 key to select the screen format PIP Picture in Picture Allows you to call up a PIP screen of the TV or HD High Defintion device For description of PIP menu items and how it works refer to
5. To cm NV 10 cm Place your TV set on a solid stable surface leaving a space of at 10 cm around the set o9 Connections Insert the aerial plug into the 750 socket at the bottom of the set Insert the mains plug into a wall 220 240V 50 60Hz NOTE For more details on other connections refer to the connection guide CONNECT Using the Remote Control Xx 10 cm Pull out the plastic insulation sheet from the lt gt battery to enable the remote control to operate O Switching on the TV set PROGRAM VOLUME YAMOd socket To switch on the TV set press the POWER key A green indicator comes on and the screen lights up If the TV set remains in standby mode red indicator press the PROGRAM key on the keyboard or the P key on the remote control AUDIO IN CMI 2 VGA Jg Q c Jg v E gt X E E gt Television keys and connectors 1 POWER key to switch the TV on and off A little power remains on even when the Power switch is turned off 2 VOLUME key to adjust sound level MENU key to access or close menus The PROGRAM keys can be used to select a menu item and the VOLUME keys to enter into the selected menu item and make adjustments PROGRAM key to select programmes o
6. or CAV key Pixel Plus Offers a unique combination of ultimate sharpness increased depth impression true natural detail brilliant and vivid colours Press key for a Pixel Plus demonstration Press key again to exit demonstration pvp AUX see Remote Control DVD or AUX on page 8 Surround Sound To turn on or off the surround sound effect In stereo this gives an audio experience the speakers are further apart For models equipped with Virtual Dolby Surround you can enjoy Dolby Surround Pro Logic sound effects 8 Telextext keys see page 16 av To display Source List to select TV or peripheral equipment connected to AV SIDE SVHS CVI 1 CVI 2 VGA HDMI 1 or HDMI 2 Active Control See page 15 menu To call up or exit the TV menus 9 Cursors D c lt a These 4 keys are used for selection and adjustment of menu items D ok GD Confirms selection D Volume VOL Increases or decreases the sound level Smart Picture Sound Used to access a series of predefined picture and sound settings see page 15 Remote Control keys Control keys PHILIPS The signal strength indicator shows the signal strength of the reception of the programme you are watching B 0 9 Numerical keys Co Cs For direct selection of
7. POWER socket Insert the mains plug into a wall socket 6 DVI Audio In socket for connecting a HD high definition equipment or computer with DVI output Q Component Video Inputs 2 VGA Audio In sockets to connect to equipment like VCR Set Top box games console and other devices or to an Analogue PC which have the same sockets 8 AV sockets to connect to equipment like VCR Set Top box games console and other devices which have the same sockets Component Video Inputs 1 Audio In sockets to connect to equipment like DVD Set Top box which have the same sockets Connect the audio inputs of the TV to the outputs of the device together with the Component Video Inputs TV socket Insert the aerial plug into the 75 socket D HDMI 1 HDMI 2 sockets to connect to set top boxes DVD player recorder High Definition equipment or Personal Computer For service use only Side sockets for connecting to devices like camera or camcorder Also allows you to connect your headphone for your personal listening pleasure NOTE For more details on connections refer to the guide CONNECT Remote Control keys Control keys PHILIPS 1 Standby To set the TV to standby mode To switch the TV set on again press 0 J to 8 P
8. channels For a 2 digit channel number the 2 digit must be entered before the dash disappears D Screen information 69 To display remove the channel number the sound mode the remaining time of the sleeptimer and the signal strength indicator Press key for more than 5 seconds to permanently display the channel number on screen to remove channel number press key again for more than 5 seconds Mode Select between TV DVD and AUX mode see Remote Control DVD or AUX on page 8 Programme List To display clear the list of programmes Press A V keys to select a programme and gt key to display it Picture in Picture C9 To display a PIP window on the TV screen see pages 21 22 on PIP Picture in Picture feature D Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or for bilingual programmes to choose between or Dual The Mono indication is red when in forced position Screen Format see page 14 AUX See Remote Control DVD or AUX on page 8 Mute Press key to turn off sound and press again to turn on sound again D Selecting TV programmes To select the next or previous programme The number and the sound mode are displayed for a few seconds For some TV programmes the title of the programme appears at the bottom of the screen eb Previous Present programme To alternate between the last viewed and present programme
9. of Audio Selection Select the audio from the TV or PC HD Press 4 key to select the audio source Description of Features Format Select between full screen or native format of the PC screen Press 4 key to select the screen format PIP Picture in Picture Allows you to call up a PIP screen of the TV or HD High Defintion device For description of PIP menu items and how it works refer to the section on PIP Picture in Picture on pages 21 22 Mode Selection Select between HD or PC mode Press 4 key to select the mode Supported PC Resolutions 640 x 480 60 Hz 800 x 600 72 Hz 640 x 480 67 Hz 800 x 600 75 Hz 1024 x 768 60 Hz 1024 x 768 70 Hz 1024 x 768 75 Hz 640 x 480 72 Hz 640 x 480 75 Hz 800 x 600 56 Hz 800 x 600 60 Hz TV in HD High Definition Mode The HD High Definition mode allows you to enjoy clearer and sharper pictures if you are using a HD equipment that can produce high definition programming Important For the TV to function in HD mode the following steps must be taken STEP 1 Connect the HD equipment Via CV1 or CVI 2 VGA Connect output of the HD equipment to the CVI 1 or CVI 2 VGA input of the TV Use a VGA to CVI adaptor CVI 2 VGA inputs CVI 1 inputs HDMI 2 HDMI 1 2 1 4 2 DM AUDIO IN Bottom of TV Via HDMI Connect HDMI DVI output of the HD equipment to the HDMI 1 or HDMI 2 input of the TV Use a HDMI to
10. or receiver such as a monitor television or projector arr STEP m TV System SECAM Video playback NTSC PAL SECAM Sound System Mono Nicam Stereo Virtual Dolby Surround Connectivity Rear TV 75 0 AV In 1 CVI 2 VGA VGA Audio In DVI Audio In HDMI 1 HDMI 2 Audio In Video In S Video In Headphone Set dimensions with stand Width Depth Height Nett Weight with stand 19 2 kg 25 9 kg 32 kg Note Specification is subject to change without notice 25 PHILIPS Be responsible Respect copyrights Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners 2005 O Koninklijke Philips Electronics N V All rights reserved www philips com 3139 125 36783
11. the section on PIP Picture in Picture on pages 21 22 Auto Adjust Position of image is set automatically Description of Reset to Factory Setting To return to factory settings default settings NOTE For more details on connection to the PC equipment see guide CONNECT 17 TV asa PC Monitor as a PC Monitor Connect the PC Via HDMI Connect DVI output of the PC to the HDMI 1 or HDMI 2 input of the TV Use a DVI to HDMI adaptor HDMI 1 HDMI 1 inputs at bottom of TV 9 HDMI 2 Q HDMI 1 SE DVI AUDIO IN STEP 2 Select the Source Press key to display Source List Press A v key to select HDMI 1 or HDMI 2 Select HDMI 1 or HDMI 2 HDMI 2 Press gt key to switch to the selected source Accessing the PC menu Q Press menu key to display menu Press v key to select Features Press key to access Features menu 18 Press v key to select Mode Selection If HD is displayed at Mode Selection press gt key to select PC Press key to display PC menu Press A key to select the PC settings Picture Audio Selection or Features o 6 Press 4 key to select or adjust setting Description of Picture settings Brightness Adjusts the brightness Contrast Adjusts the contrast Colour Temp Changes the colour setting Cool bluer Normal balance or Warm redder Description
12. DVI adaptor if DVI is connected HDMI 1 HDMI 2 inputs at bottom of TV STEP 2 Select the Source Press key to display Source List Press A Y key to select HDMI 1 or HDMI 2 if you connect to a Digital HD equipment Select CVI 1 or CVI 2 VGA if you connect to a Analogue HD equipment Press gt key to switch to the selected Source Source Source CVI 2 VGA 19 20 TV in HD High Definition Mode Accessing the HD menu Press key to display the HD menu Press A Y key to select the HD settings Picture Sound or Features Press LOK key to access selected setting Press 4 keys to select and adjust setting HD Picture and Sound settings Functions of HD Picture and Sound settings work in exactly the same way as the TV Picture and Sound settings see page 11 HD Features Timer Functions of the Sleeptimer and Timer work in exactly the same way as the TV Sleeptimer and Timer Timer see page 12 PIP Picture in Picture Allows you to call up a PIP screen of the TV or PC For description of PIP menu items and how it works refer to the section on PIP Picture in Picture on pages 21 22 Horizontal Shift Adjust the horizontal position of the image Vertical Shift Adjust the vertical position of the image Mode Selection When you connect PC or HD equipment supporting resolutions of 480p 576p or 720p the Mode Selection in the Fe
13. FLATIV English PHILIPS Introduction Thank you for purchasing this television set This handbook has been designed to help you install and operate your TV set We strongly recommend that you read it thoroughly Table of Contents of Contents Safety Information ess eC EA RA iene de pa 2 Preparation Getting started i i sees Re ea 3 Television keys and 8 4 Remote Control keys ix Lercer per wes edd epe aide ela RETE PIT 6 Remote Control keys DVD i n tas enr koe Ra Hb QR OUR 8 Menu Language ier sx erre ge CC re UA LAUR IC UR RR AR Ue ated ges 8 PUTO SCOP Lo obese bee e de dente sh eu e Ded vel pd eue eb 9 Manual Store siii RO e teer Hd Rees 9 dine E 10 Name pa epr 10 ChannelEdit ippre biblia PP DE pb SENE pe dee 11 Picture and Sound settings scsi sc ees ee ee eR X RE I Y d 11 uc 12 Contrast and NR Noise Reduction 0 0 cece eee eee 12 Child Lock mea ei breve ee pet One p edu ewe Auer ge a ae Rees 13 Screen Formats essence en e ree HA Saeed wee eed DEEE erre Se ae 14 Smart Picture and Sound al Sali dane aes 6 ens ates 15 Active Control esses rer Vx Kr ee ERG RE AEE 15 Teletext oie bse eat dette beth de
14. MI 2 input of the TV to the DVI output of the PC Use a DVI to HDMI adaptor HDMI 1 HDMI 2 inputs at bottom of TV NOTE For more details on connection to the HDMI 2 HD equipment see guide CONNECT DM AUDIO IN 21 PIP Picture in Picture Accessing the PIP via the PIP menu Q Press key to display main menu Press A key select Features and the key to enter the Features menu Press v keys to select PIP Features Press a v keys to select PIP menu items Press 4 A v keys to access the PIP menu items make the following adjustments or options Q To exit the PIP screen select PIP Size followed by the Off option Accessing PIP with the PIP key O Press LG J key on the remote control to display PIP screen A small PIP screen will appear on the TV screen Press LG key a second time to change the small PIP screen to a medium PIP screen size 22 Press key a third time to change the medium PIP screen to large PIP screen size Press key a fourth time to change the large PIP screen to a Side by Side a TV screen on one side and the PIP screen on the other side Press key a fifth time to exit PIP screen Definitions of PIP items PIP Size Select your PIP size Off Small Medium Large and Side by Side Horizontal Move the PIP screen horizontally from left to right and vice versa Vertic
15. NAL or HD mode Cannot access Install menu PC modes do not work Wrong connections Wrong source selected Wrong display resolution Wrong setting of PC graphic card S Video colour becomes faint Wrong detection of signal Black bar on top PC refresh rate too high and bottom of screen in PC mode DVI Digital Visual Interface A digital interface standard created by the Digital Display Working Group DDWG to convert analog signals into digital signals to accommodate both analog and digital monitors VGA Video Graphics Array a common standard graphics display system for PCs RGB signals These are the three video signals Red Green Blue which make up the picture Using these signals improves picture quality S VHS signals These are 2 separate Y C video signals from the S VHS and Hi 8 recording standards The luminance signals Y black and white and chrominance signals C colour are recorded separately on the tape This provides better picture quality than with standard video VHS and 8 mm where the Y C signals are combined to provide only one video signal 16 9 Refers to the ratio between the length and height of the screen Wide screen televisions have a ratio of 16 9 conventional screen TV sets have a ratio of 4 3 Press AV key and select TV mode You can now access the Install menu by using the Menu key Check whether connections are correct see TV as PC Monitor on page 17
16. al Move the PIP screen vertically from top to bottom and vice versa HDMI If you call up a PIP screen from the HDMI 1 or HDMI 2 source you have no access to HDMI selection If you call up a PIP screen from the other sources you can select between HDMI 1 or HDMI 2 in the PIP menu Troubleshooting Tips Below is a list of symptoms you may encounter with your TV Before you call for service make these simple checks No display on screen Poor reception snowish picture and noise No picture No sound on certain channels Sound interference TV not responding to remote control Occasional appearance of red blue green and black spots on screen Intermittent or flickering picture in HD mode No sound or picture but front panel red light is on Possible Causes What you should do Faulty power supply Check whether power cord is properly connected TV s Power not turned into the mains socket and to your TV If there is still no power disconnect plug Wait for 60 seconds and re insert plug Switch on TV again Press the key on the remote control Faulty antenna connection Check antenna connection at rear of TV Weak transmission Try to fine tune your picture see to page 9 Wrong TV system Have you chosen the right TV system see to page 9 Faulty aerial and cable Check whether cables or aerial sockets are properly connected Wrong source selected Check whether the source is correctl
17. atures menu will be highlighted This will allow you to select between the PC and HD mode If it does not support the 480p 576p or 720p resolutions you cannot access this function Supported HD format 480p 576p 720p 1080i NOTE For more details on connection to the HD equipment see guide CONNECT Your Philips TV is HDMI compliant If you do not get a good picture please change the video format on your device DVD player cable set top box etc to a standard format For example for DVD player select 480p 576p 720p or 1080i For PC select 640 x 480 800 x 600 or 1024 x 768 If the problem persists please refer to your PC user manual on possible software upgrades to your graphics card Please note that this is not a defect of the TV set PIP Picture in Picture The PIP Picture in Picture feature allows you Connect your HD equipment to call up a PIP screen of the PC Personal Computer or HD High Defintion equipment Via HDMI 1 or HDMI 2 while watching a TV programme Likewise you can also up a PIP screen of the TV while you Connect HDMI 1 or HDMI 2 input of the TV are in PC or HD mode to the HDMI DVI output of the HD equipment Use a HDMI to DVI adaptor if DVI is connected Important To call up a PIP screen the following steps must be taken HDMI 1 HDMI 2 inputs at bottom of TV Connect your PC equipment 5 Via HDMI 1 or HDMI 2 2 Connect HDMI 1 HD
18. bits edb cdc pe E RP OO dpe ebbe 16 TV eve eesti SEGA Hania eb enger gamed eS 17 TV in HD High Definition Mode 0 eee eee eens 19 PIP Picture in Pict re eere RR 21 Troubleshooting Tips reisi a er od ee le Here eyes VES be YR EAE RE e dca 23 cll Em 24 She MERE ear 25 Recycling The packaging of this product is intended to be recycled Apply to the local authorities for correct disposal Disposal of your old product Your product is designed and manufactured with highly quality material and components which can be recycled and reused When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 976 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose off your old products with your normal household waste The correct disposal of your product will help prevent potential negative consequences for the environment and human health Safety Information Information Leave at least 10 cm around each side of the TV set to allow for proper ventilation Place the set on a stable level surface Never cover the ventilation slots of the TV with a cloth or other material lt may cause overheating Do not insert anything in the ventilation holes If metal
19. cted and press key to access Install menu Sound System Press 4 to select Auto automatic Press v key repeatedly until Manual Store detection BG I DK or M is selected and press gt key to access Manual Store menu Search Press 4 to start manual tuning of channel Searching stops once a transmitting channel is found Channel Press 4 or to keys to key in the channel Fine Tune If the channel reception is not satisfactory press 4 to adjust accordingly To return to previous menus press MENU key D Colour System 0 AUTO 9 7 To exit the menu press 10 Sort feature allows you to change the channel number to another channel number for a particular TV station Q Press key Press v keys repeatedly until Install is selected and press access Install menu e 9 Press v key repeatedly until Auto Store is selected and press gt OK key to access sort mode Press A w keys to select the channel number you want to sort to and press gt key to enter sorting mode The arrow cursor now points to the left Press A w keys to select the new programme number and confirm with the 4 key The arrow points to the right and sorting is completed Repeat steps and for each channel number you wish to re number To return to previous menu press MENU key To ex
20. e The Personal setting is the setting that you set up using the Picture Sound menu in the main menu This is the only setting in the Smart Picture Sound settings that can be changed All other settings are pre set at the factory SMART Smart Picture Smart Sound key repeatedly to cycle through the settings to select your desired mode Smart Picture settings Natural Multimedia Personal Smart Sound settings i or Voice Rich Natural Soft Multimedia Personal Brilliant and sharp picture settings suitable for bright environment and for use in demonstrations to show off the quality of the TV on good sources Reference mode for living room conditions and average signals Intended for bad quality signals Suitable for living room viewing Best for graphical applications Pictures settings are set to your preference Definition of Smart Sound settings Theatre Emphasize high and low tone Bass and Treble boosted Music Voice Emphasize low tone Bass boosted Emphasize high tone Treble boosted Personal Sound settings are set to your preference Active Control Control Active Control feature automatically adjusts the picture setting for optimal picture quality continuously under any signal conditions 1 Press key repeatedly to alternate between Active Control Off and Active Control On option
21. ed to access the items or corresponding pages The coloured areas flash when the item or the page is not yet available 4 0 Contents This returns you to the contents page usually page 100 o Sub page display HD Certain pages contain sub pages which are automatically displayed successively Press the key to hold sub page and press the key a second time to resume Use the 4 gt keys to select previous or next sub page Double page teletext EB To activate or deactivate the double page teletext display mode The active page is displayed on the left and the following page is displayed on the right Press if you want to hold a page i e the contents page The active page is then displayed on the right To return to normal mode press the key Oe CD Mee Mee PHILIPS Hidden QD information To display or hide the concealed information games solutions Enlarge a page SUED di This allows you to display the top half or bottom half of the page Pressing it again will return the page to normal size TVasaPCMonitor as a PC Monitor Your TV can be used as a computer monitor Important For the TV to function as PC monitor the following steps must be taken Connect the PC Via CVI 2 VGA Connect VGA output of the PC to the CVI 2 VGA input of the TV Use a VGA to CVI adaptor CVI 2 VGA inputs at bottom of TV HDMI 2 HDMI 1 c DM AUDIO IN STEP 2
22. een when viewed on a widescreen TV This function allows you to optimise the picture display on screen Press key or to select the different modes This TV set is also equipped with automatic turning which will select the correct screen format provided the specific signals are transmitted with the programmes 4 3 The picture is reproduced in 4 3 format and a black band is displayed on either side of the picture Movie expand 14 9 The picture is enlarged to 14 9 format a thin black band remains on both sides of the picture Movie expand 16 9 The picture is enlarged to 16 9 format This mode is recommended when displaying pictures which have black bands at the top and bottom letterbox format Subtitle Zoom This mode is used to display 4 3 pictures using the full surface of the screen leaving the sub titles visible Superzoom This mode is used to display 4 3 pictures using the full surface of the screen by enlarging the sides of the picture Widescreen The picture is displayed in the correct proportions of images transmitted in 16 9 Note If you display a 4 3 picture in this mode it will be enlarged horizontally Smart Picture and Sound Definition of Smart Picture settings Smart Picture feature offers you a choice of 5 picture settings namely Rich Natural Soft Multimedia and Personal Smart Sound feature offers you a choice of 4 sound settings namely Theatre Music Voice and Personal Not
23. elect Off option To return to previous menu press MENU key To exit the menu press key Picture and Sound and Sound Q Press key Press A keys to select Picture or Sound Press gt I COK key to access Picture or Sound menu Press v keys to select a Picture Sound setting and the 4 keys to adjust To return to previous menu press MENU key To exit the menu press the key Description of the Picture settings Brightness this changes picture brilliance Colour this changes the intensity of the colour Contrast this changes the difference between the light and dark tones Sharpness this increases or decreases the sharpness level to improve details in the picture Hue this increases or decreases the colour intensity Note Hue is applicable to NTSC programmes only Colour Temp this changes the colour rendering Cool bluer Normal balanced or Warm redder Description of the Sound settings Equalizer to adjust the sound tone from bass 120 Hz to treble 10 KHz Balance this balances the sound on the left and right speakers AVL Automatic Volume Leveller this is used to limit sudden increases in sound for example during a programme change or advertising slots Dolby Virtual To activate deactivate the surround sound effect You can also access these settings with the key 11 12 The Timer feature allows
24. it the menu press Gu X Name feature allows you to enter a name for any channel you select Q Press key Press A keys repeatedly until Install is selected and press key to access Install menu Press v key repeatedly until Name is selected and press gt OK key to access Name mode e Name 8 CELLIE 9 9 Press A v keys to select the channel you want to name Press gt key to move to the first character display area and press A w keys to key in the first character Press gt key to move to the next character display area and continue to key the next character with the A w keys You can key up to a maximum of 5 characters Press key to store name The name is now indicated on the top left corner To return to previous menu press MENU key To exit the menu press key Channel Edit feature allows you to edit or skip programmes which have bad or weak signal or programme you do not watch often Q Press key Press A v keys repeatedly until Install is selected and press OK key to access Install menu Channel Edit Press v key repeatedly until Channel Edit is selected and press key to access Channel Edit mode Press 4 gt or to keys to select the channel you want to skip Press v key to select Skipped and press 4 gt keys to select On option to activate skipping of channel To deactivate s
25. or improved picture visibility select On option to activate feature Press v keys repeatedly until Features is selected and press key to access Features menu Press v keys to select Contrast or NR Noise Reduction and the 4 keys NR Noise Reduction to select an On or Off option improves noisy little dots on picture picture due to weak signal transmission To return to previous menu press select On option to activate feature key o To exit the menu press The Child Lock feature allows you to lock channels to prevent your children from watching certain programmes Q Press key Press A v keys repeatedly until Features is selected and press key to access Features menu e Press A w keys repeatedly until Child Lock is selected and press key to access Child Lock mode Key in the access code 0711 by the Digit 0 9 keys A message Incorrect will appear Key in the access code 0711 again Features Child Lock Access Code Child Lock e d 0 e It will then prompt you to change code Key in your own 4 digit code by the Digit 0 9 keys and confirm the new code PIP Picture in Picture Once the new code is confirmed the Child Lock menu will appear Lock Channel gt W In the Child Lock menu use the A 4 gt Digit 0 9 and keys to access and activate the Child Lock functions
26. or something flammable is inserted in these holes it may result in fire or electric shock Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock To prevent fire or shock hazard do not expose your TV to rain or moisture V x Avoid placing your TV set under direct sunlight or heat Installation of the TV set on the wall should be carried out by qualified serviceman Improper and incorrect installation may render the set unsafe X 3 ay When cleaning the surface or the screen of the set wipe gently with absorbent cotton or cloth or other soft material like chamois Do not use too wet a cloth which is dripping with water Do not use acetone toulene or alcohol to clean the TV As a safety precaution unplug the power cord from the mains Sdi Pull the power lead by the plug Do not pull on the power lead Do not use a poor fitting mains socket Insert the plug fully into the mains If it is loose it may cause arching and result in fire As a safety precaution do not touch any part of the TV power lead or aerial lead during lightning storms Avoid placing vase filled with water on the TV Water spilled into the set could result in electric shock Do not operate set if water is spilled into it Have it checked immediately by a qualified serviceman Preparation Getting started 1 Positioning the TV set
27. previous menu press MENU key To exit the menu press the _ _ key o 0000 press v key repeatedly until the FOURTH item in the TV menu is highlighted press gt key to go into the Install menu press 4 keys to select your preferred language the menu will now appear in the chosen language You can proceed to install the TV channels automatically ETD Store O Press MENU key Press v key repeatedly until Auto Store k 1 T P is selected ress A W keys repeatedly until Insta is selected and press ICK key to Press OK key to start automatic tuning of channels All the available TV channels will be stored The display shows the progress of the search and the number of channels found This operation will take a few minutes to complete access Install menu Important To exit or interrupt the search before it is completed press key If you interrupt the search during auto store not all channels will be stored For all channels to be stored you need to do a complete auto store search again Auto Store Manual Store You can choose to tune your channels manually Press A keys to select a setting Manual tuning allows you to store each Colour System programme manually Press 4 to select Auto automatic Q Press key detection PAL NTSC 3 58 NTSC 4 43 Press A v keys repeatedly until Install or SECAM is sele
28. s Active Control Off Active Control On Select the Active Control On option to activate the Active Control feature Select the Active Control Off option to deactivate the Active Control feature 15 16 Teletext is an information system broadcast by certain channels which can be consulted like a newspaper It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language cable networks satellite channels etc PHILIPS LAMA Cp 1 Teletext call This is used to switch on or off teletext display The summary appears with a list of items that can be accessed Each item has a corresponding 3 digit page number If channel selected does not broadcast teletext the indication 100 will be displayed and the screen will remain blank Proceed to exit teletext and select another channel o9 Selecting a page D D Direct access to 2 the items EB EE Enter the number of the page required using the 0 to 9 keys or P keys Example page 120 enter 120 The number is displayed at the top left corner of the screen When the page is located the counter stops searching Repeat this operation to view another page If the counter continues to search this means that the page is not transmitted Select another number Coloured areas are displayed at the bottom of the screen The 4 colour keys are us
29. y selected Press button to enter Source list and select the correct source Wrong TV system Check whether the correct TV system is selected see to page 9 Zero volume level Try increasing volume Sound muted Check that the mute 1 mode is not on If mute mode is on press the key to deactivate mute mode e Headphone is connected Disconnect headphone connection only for 32 model Electrical appliances Try switching off any electrical appliances for interference example hairdryer vacuum cleaner that are in use Wrong placement of Check the placement of the batteries batteries Flat batteries Try changing the batteries Aim remote control directly at sensor on front of TV Characteristic of liquid This symptom is not a problem The liquid crystal crystal panel panel is built with very high precision technology giving you the fine picture details Occasionally a few non active pixels may appear on the screen as a fixed point of red blue green or black Note that this does not affect the performance of the set HDCP see glossary Noise is displayed if the connected digital equipment s authentication failed DVD player or Set Top box HDCP authentication failed Check user manual for the digital equipment you are connecting Use a standard HDMI to DVI cable Set on standby mode Press the key on the remote control 23 24 Troubleshooting Tips Tips In AV EXTER
30. you to set the timer To make adjustments to activate timer function to switch to another channel at a specified time use the 4 gt A Y or Digit 0 9 keys while you are watching another channel You can also use it as an alarm to switch on the TV Sleep 9 select an automatic standby at a specified time from standby mode For the period timer to function the set must not be switched Time enter the current time off Once the set is switched off the timer is disabled Start Time enter the start time Q Press key Stop Time enter the standby time Press A keys repeatedly until Features Channel enter the number of the is selected and press key to dana TO the Wake ep access Features menu Activate the settings include 0 Press key to access Timer Once for a single alarm menu Daily for each day Press v keys to select a Timer item Off to cancel Display select On option to display current time on the screen To switch off display select Off option Features Press key on the remote control to put the TV set in standby mode It will automatically come on at the programmed time If you leave the TV set on it will just change channel at the Start Time and will go to standby mode at the Stop Time Time 010 56 9 Contrast and NR Noise Reduction Q Press key Definition of the feature settings Contrast optimise the total contrast of the picture f
Download Pdf Manuals
Related Search