Philips 20PF5120 20" LCD flat TV 20"
Contents
1. 15 125 mm 20 190 mm WARNING Read all instructions carefully before mounting Correct assembly is essential The maximum allowed wight of the LCD Display is 4 2 kg 9 3 Ibs 15 8 5 kg 18 7 165 20 The assembly materials not supplied are only suitable for attachment to solid wood brick or concrete walls For wood walls Drill each hole 3 6 mm in diameter and 20 mm in depth To avoid possible injury do not mount it above a sofa or bed The manufacturer accepts no liability for improper installations or installations not performed in accordance with these instructions 12 Basic TV AND REMOTE CONTROL OPERATIONS TELEVISION AND REMOTE CONTROL Plug the DC adapter into the DC IN I6V jack on the LCD TV Plug the power cable into an outlet Press POWER to turn on the LCD TV Press VOLUME to increase the sound level or press VOLUME to decrease the sound level Press or CH to select channels Point the remote control toward on the front of the LCD TV to operate BATTERY INSTALLATION Remove the battery compartment lid on the button of the remote control UV AWN Cx es PHILIPS Place lithium cell in the remote control Be sure the and ends of the batteries line up as marked inside the battery CR2025 compartment Reattach the battery compartment lid2. Hen 14 Timer Menu 22 2 15 A Picture Menu TV Picture Menu Controls 17 Sound Menu K TV Sound Menu 18 gt Features Menu 7 Auto n RR REPE I9 Auto Picture Control erri tr rrt l6 Auto Sound Coritrol ete genet l6 Auto l ock Access rex 20 Auto Lock Program siet ete epos ee pr edet 21 Auto Lock Movie 22 Auto Lock Ratings 23 Using The Picture Format hme 24 SURE Control sett erento coe re 25 Closed see eee spese e 26 PC Mode PC Picture Controls 1 1 22 ete rrt hn 27 PC Audio Controls eere rr mmn 28 Using PC PIP Picture In Picture Feature 29 Setting Up The PC t Enn 30 MI General Information Trouble Shooting 3 Care And Cleaning eese RR or ER E ERR 32 Ln ss 33 Regulatory sisi hr e yere ORE PE E EFE 34 Limited Warranty rre eye 35 Here are a few of the special features of your new LCD TV Audio Video In Jacks Use to quickly connect other equipment to your LCD TV Automatic Channel Programming Auto Program Quick and easy setup of available channels Closed Captioning All
3. ey CONTROL Status Exit Button Press to see the current channel number on the TV screen Also press to clear the TV menu after control adjustments Power button Press to turn the LCD TV on or off CC button Press the CC button to select CC on or CC off SAP button Press to select a sound mode if POWER ATUS EXIT cc PIP Sleep button Press to set the LCD TV to turn itself off within a certain time available with the TV programming Mono Stereo or SAP PIP button Press repeatedly to change the size of PIP window in PC mode Incredible Surround button Adds greater depth and dimension to TV sound Select from Incredible Surround or OFF Format menu A CH Button Press to go to previously selected Picture Format button channel Press the FORMAT button repeatedly to toggle among the three screen format sizes 4 3 EXPAND 4 3 COMPRESS 16 9 Menu button Press to activate onscreen menu back SOUND AUTO PICTURE to previous level inside the onscreen menu or press to exit the onscreen Cursor Buttons menu Left Right Up Down Press these buttons to highlight select and adjust items on the TV s on screen menu Channel button Press to adjust the channel up or down Mute button Press to eliminate or restore the LCD TV sound Mute will appear on the scre
4. D TV MA Mature Audience Only Specifically designed to be viewed by adults and may be unsuitable for children under 17 This type of programming contains one or more of the following graphic violence V explicit sexual situations S or crude indecent language L 7 Auro Lock Access the next few pages you ll learn how to block programs and understand the rating terms for certain broadcasts First set an access code PICTURE PICTURE FORMAT AUDIO gt PICTURE ALIGNMENT FERTURES AUTOLOCK FEATURES 1 Press the MENU button to see the INSTALL CLOSED CAPTION MAIN CONTROL PICTURE FORMAT LOCK PROGRAM PICTURE ALIGNMENT CHANG CODE RUTOLOCH CLEAR ALL CLOSED CAPTION BLOCK OPTION COLOR TEMP MOVIE RATING TU RATING onscreen menu COLOR TEMP CHANGE CODE 2 Press the CURSOR DOWN button to highlight the FEATURES menu then press CURSOR RIGHT to enter ENTER NEW CODE CONFIRM CODE STATUSIEXIT Press the CURSOR DOWN button to select AUTO LOCK 4 Press the CURSOR RIGHT button CHANGE CODE will appear on the screen Enter a four digit code using the Number 5 buttons The screen will prompt you to confirm the code you just entered Enter your same new code again om 6 Press MENU repeatedly to remove the menu from the screen HeLPFUL HINT Remember that 0711 is the default AutoLock code If your access c
5. In the Personal auto picture mode you can create your own preferred video settings 1 Press the AUTO PICTURE button on the remote control The current Auto Picture setting will appear on the screen 2 Press the AUTO PICTURE button repeatedly to select either Personal Rich Natural Soft or Multimedia Note The settings of the Personal auto picture mode can be adjusted in picture options within the onscreen menu The Personal mode is the only mode which can be adjusted by the user via the onscreen picture control menu Personal mmo Cx PHILIPS za Auro SouND CONTROL Sound allows you to select from three user presets and a personal mode that you set according to you own preferences through the onscreen Sound menu The four user presets Personal Voice Music and Theatre enable you to tailor the TV sound so as to enhance the particular program you are Personal watching Following these steps to select any of the options Press the AUTO SOUND button on the remote 1 control The current Auto Sound setting will appears on the screen 2 Press the AUTO SOUND button repeatedly to toggle among the four setting Personal Voice Music or Theatre Note The settings of the Personal auto sound mode can be adjusted in sound control within the onscreen menu The Personal mode is the only mode which can be adjusted by the user via the o
6. This type of programming contains one or more of the following very graphic violence very graphic and explicit or indecent sexual acts and very coarse and intensely suggestive language 19 TV RATINGS TV Y children Appropriate for all children Designed for a very young audience including children ages 2 6 This type of programming is not expected to frighten younger children TV Y7 Directed to Older Children Designed for children age 7 and above It may be more appropriate for children who can distinguish between make believe and reality This programming may include mild fantasy and comic violence FV or fantasy violence TV G General Audience Most parents would find this programming suitable for all ages This type of programming contains little or no violence no strong language and little or no sexual dialog or situations TV PG Parental Guidance Suggested Contains material that parents may find unsuitable for younger children This type of programming contains one or more of the following Moderate violence V some sexual situations S infrequent coarse language L or some suggestive dialog D TV 14 Parents Strongly Cautioned Contains some material that many parents would find unsuitable for children under age 14 This type of programming contains one or more of the following intense violence V intense sexual situations S strong coarse language L or intensely suggestive dialog
7. button to highlight the FEATURES menu then press CURSOR RIGHT to enter STATUSIEXIT 3 Press the CURSOR DOWN button to highlight the PICTURE FORMAT menu then press CURSOR RIGHT to enter 4 Press the CURSOR DOWN button to select the PICTURE FORMAT then press CURSOR RIGHT to confirm your choice voL C Cs n C Co 4 3 Note Press the FORMAT button repeatedly to toggle among the three screen format sizes 4 3 EXPAND 4 3 or COMPRESS 16 9 5 Press MENU repeatedly to remove the menu from the screen PHILIPS COMPRESS16 9 24 SurF CONTROL list or series of previously viewed channels can be with the SURF button on your remote control With this feature you can easily switch between different TV channels that currently interest you The SURF control allows you to set up to 8 channels in its quick viewing list Press the or CH button or the numbered 1 buttons to select a channel to add to the SURF list 2 Press the SURF button on the remote control The onscreen display may read SURF LIST EMPTY The number of the current channel will be shown with ADD to the right 3 While the SURF list message or the SURF channel list appears on the screen press the CURSOR RIGHT button to add the present channel to the SURF list 4 If you want to delete the present channel from the SURF list press the CURSOR RIGHT butto
8. menu then press CURSOR RIGHT to enter Press the CURSOR DOWN button to select CLOSE CAPTION then press CURSOR RIGHT to enter Press the CURSOR RIGHT button to select the closed caption you want CC MUTE CCI CC2 Txtl Txt2 Txt3 or PHILIPS Press MENU repeatedly to remove the menu from the screen A W N Note Closed Caption can also be activated by pressing CC button on your remote control HINT Not all TV programs and product commercials are broadcast with Closed Captioning CC Nor are all Closed Captioning MODES CAPTION 1 4 or TEXT 1 4 necessarily being used by broadcast stations during the transmission of a program offering Closed Captioning Refer to your area s program listings for the stations and times of shows being broadcast with Closed Captioning 26 PC Picture CONTROLS his TV can also be used as a PC Monitor A PC Tos signal must be present or the TV will go into standby mode The PC Picture controls allow you to adjust the picture Note Make sure you are in PC mode 1 Press the MENU button on the remote control to see the onscreen menu When the PICTURE menu is highlighted Press the CURSOR RIGHT button to enter the PICTURE menu 2 Press the CURSOR DOWN button to highlight the item that you would like to adjust Color Temp Adjust the color temperature of the picture Select from Normal Cool or Warm Brightness Adj
9. reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond For Customer Use Enter below the Serial No which is located on the rear of the cabinet Retain this information for future reference p H S Visit our World Wide Web Site at http www usasupport philips com IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT Read these instructions exhibits a marked change in performance 2 Keep these instructions E The appliance has been dropped or the enclosure 3 Heed all warnings damaged 4 Follow all instructions 17 Tilt Stability All televisions must comply with 5 not use this apparatus near water recommended international global safety standards for tilt 6 Clean only with a dry cloth and stability properties of its cabinet design 7 Do not block any of the ventilation openings Do not compromise these design standards by applying Install in accordance with the manufacturers instructions excessive pull force to the front or top of the cabinet 8 Do not install near any heat sources such as radiators whic
10. 4 provides information with respect to proper table specified by the manufacturer or sold with grounding of the mast and supporting structure grounding the apparatus When a cart is used use caution of the lead in wire to an antenna discharge unit size of when moving the cart apparatus combination to avoid grounding connectors location of antenna discharge unit injury from tip over connection to grounding electrodes and requirements for 13 Unplug this apparatus during lightning storms or when the grounding electrode See Figure below unused for long periods of time 21 Object and Liquid Entry Care should be taken so 14 Refer all servicing to qualified service personnel Servicing that objects do not fall and liquids are not spilled into the is required when the apparatus has been damaged in any enclosure through openings way such as power supply cord or plug is damaged liquid 22 Battery Usage CAUTION To prevent battery leakage has been spilled or objects have fallen into apparatus the that may result in bodily injury property damage or apparatus has been exposed to rain or moisture does not damage to the unit operate normally or has been dropped Install all batteries correctly with and aligned as 15 This product may contain lead and mercury Disposal of marked on the unit these materials may be regulated due to environmental Do not mix batteries old and new or carbon and considerations For disposal or recycling info
11. IP from AV S Video or Component Audio Select audio source of PIP or PC Display Select which corner of the position of PIP 3 Press the CURSOR RIGHT button to enter HELPFUL HINT PIP windows with component video source can only support up to 480i 576i SD video signal MAIN CONTROLS PICTURE PIP INSTALL gt STATUSIEXIT FEN me Ce 3 AUDIO gt FEATURES cc EJ e Cr CI Ca Cs ae PHILIPS SIZE VIDEO AUDIO DISPLAY m SETTING UP THE PERSONAL CoMPurER MONITOR 15PF5120 15 LCD TV 640 480 60 59 940 31 469 SVGA VESA 56 56 250 35 156 800 x 600 SVGA VESA 60 60 317 37 897 1024 x 768 XGA VESA 60 60 004 48 363 20PF5120 20 LCD TV 640 x 480 VGA VESA 60 59 940 31 469 SVGA VESA 56 56 250 35 156 800 x 600 SVGA VESA 60 60 317 37 897 30 TROUBLE SHOOTING TIPS No Power Check the TV power cord Unplug the TV wait 10 seconds then reinsert the plug into the outlet and push the POWER button again Check that the outlet is not on a wall switch Be sure the fuse is not blown on the AC power strip if one is being used No Picture Check antenna cable connections Are they properly secured to the TV s 750 plug Check th
12. L ADJUST PHASE CLOCK HORIZONTAL VERTICAL PHILIPS HINT To adjust other items repeat steps 3 and 4 2 Color Temp can also be activated by pressing Auto Picture button on your Remote Control If you are wanting to reset adjustment back to original value please enter to Factory Reset in Install menu m PC Aupio CoNrRoLs TV can also be used as PC Monitor A PC video signal must be present or the TV will go MAIN CONTROLS PICTURE gt AUTO SOUND AUDION SETTINGS FEATURES gt STEREO INSTALL INCREDIBLE SURROUND AUTO SOUND PERSONAL Note Make sure you are in PC mode AUL SETTINGS gt VOICE STEREO gt MUSIC INCREDIBLE SURROUND THEATRE into standby mode The AUDIO controls allow you to adjust the sound AUDIO remote control to show the onscreen menu 1 Press the MENU button on the RUDIO AUTO SOUND TREBLE SETTINGS BASS STEREO BALANCE INCREDIBLE SURROUND Press the CURSOR DOWN button to highlight the AUDIO menu then press CURSOR RIGHT to enter STATUSIEXIT AUDIO AUTO SOUND gt OFF SETTINGS INCREDIBLE SURROUND highlight the item that you would like to adjust Auto Sound Allows you to select from 3 factory set controls and a personal control The 4 factory set controls Personal Voice Music Theatre enhance the particular program you are watching 3 Press the CURSOR D
13. LCD TV 20 5120 User s Manual Thank you for choosing Philips Need help fast Read your user Manual and or Quick Use Guide first for quick tips that make using your Philips product more enjoyable If you have read your instructions and still need assistance you may access our online help at www usasupport philips com or call 1 888 PHILIPS 744 5477 while with your product and Model Serial number Model No DH DS Serial No 3138 155 24031 RETURN YOUR REGISTRATION CARD TODAY TO GET THE VERY MOST FROM YOUR PURCHASE Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below so don t miss out Complete and return your Product Registration Card at once to ensure Proof of Purchase Returning the enclosed card guarantees that your date of purchase will be on file so no additional paperwork will be required from you to obtain warranty service PHILIPS Congratulations on your purchase and welcome to the family Notification Dear PHILIPS product owner Thank you for your confidence in PHILIPS You ve selected one of the best built best backed products available today We ll do everything in our power to keep you happy with your purchase for many years to come As a member of the PHILIPS family you re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the
14. LOCK OPTION gt PG MOVIE RATING gt i TU RATING MA Press the CURSOR RIGHT button INPUT USER CODE will appear on the screen TU RATING MEE Use the Number buttons to enter your 4 digits access code Press the CURSOR DOWN button to select TV RATING PHILIPS Press the CURSOR RIGHT or CURSOR DOWN button to highlight any of the TV Rating options When highlighted all these options can be ON blocked or OFF unblocked A 8 Press MENU repeatedly remove the menu from the screen HeLPFUL HINT When a rating is chosen to be blocked any higher level rating will also be blocked from viewing i e If R is selected to be blocked 17 and X will automatically be blocked When a rating is set to unblock only the selected rating will be unblocked Ratings lower will not automatically be unblocked 23 UsiNc THE PICTURE FORMAT Y can change the picture format size to match the type of program you are watching Select the normal 4 3 EXPAND 4 3 or COMPRESS 16 9 or aspect ratios MAIN CONTROL PICTURE gt AUDIO gt FEATURES INSTALL gt PICTURE FORMAT PICTURE ALIGNMEN RUTOLOCK CLOSED CAPTION FEATURES COLOR TEMP PICTUREFORMAT 53 AUTOLOCK gt ENPAND 4 3 Press the MENU button to see the PICTURE ALIGNMENT COMPRESS 16 9 CLOSED CAPTION onscreen menu COLOR TEMP gt 2 Press the CURSOR DOWN
15. NMENT gt RUTOLOCH CLOSED CAPTION gt COLOR TEMP gt LOCK PROGRAM CHANG CODE CLEAR ALL BLOCK OPTION MOUIE RATING TU RATING AUTOLOCK ACCESS CODE AUTOLOCK LOCK PROGRAM CHANGE CODE gt CLEAR ALL gt BLOCK OPTION gt MOVIE RATING gt TU RATING gt gt Auro Lock Movie Ratincs I AUTO Lock feature can block programming based on the Movie Industry ratings Once you ve entered your access code and the AUTO Lock features are displayed on the MAIN CONTROL PICTURE gt PICTURE FORMAT screen AUDIO PICTURE ALIGNMENT FEATURES AUTOLOCK FEATURES ud PICTURE FORMAT LOCK PROGRAM 1 Press the MENU button to see the PICTURE ALIGNMENT CHANG CODE CLEAR ALL onscreen menu CLOSED CAPTION gt BLOCK OPTION COLOR TEMP lt MOVIE RATING TU RATING wre AUTOLOCK 2 Press the CURSOR DOWN button to highlight the FEATURES menu then press the CURSOR ACCESS CODE RIGHT to enter RUTOLOCH Press the CURSOR DOWN button to select 3 AUTO LOCK then press CRUSOR RIGHT to enter ACCESS CODE will appear on the LOCK PROGRAM G CHANGE CODE PG CLEAR ALL gt PG13 R screen BLOCK OPTION MDUIERATING TURATING gt Please use the Number buttons to enter your 4 6 MOVIE RATING digits access code 6 OF PG ON Press the CURSOR DOWN button to select MOVIE RATING then press CU
16. OWN button to STEREO INCREDIBLE SURROUND 4 AU RUDIO AUTO SOUND OFF SETTINGS ON STEREO INCREDIBLE SURROUND gt AUL Settings Allows you to adjust Treble Bass and Balance of the Sound Stereo To select from Stereo Mono and SAP Only function in mode Incredible Sound Adds greater depth and dimension to PC sound AVL Auto Volume Leveler When ON AVL will level out the sound being heard when sudden changes in volume occur during commercial breaks or channel changes Cs SURF PHILIPS 5 Press CURSOR RIGHT to enter the item you would like to adjust Press the CURSOR RIGHT or CURSOR LEFT button to adjust Press MENU repeatedly to remove the menu from the screen HINT To adjust other items repeat steps 4 and 5 28 Us nG PC PIP Picture IN Picture FEATURE IP Picture in Picture feature allows you to call subscreen when you are using your TV monitor Note Make sure you are in PC mode Press the MENU button to see the onscreen menu Press CURSOR DOWN button to highlight the FEATURES menu the FEATURES menu Press the CURSOR RIGHT button to enter the PIP menu Press the CURSOR DOWN buttons to highlight the item that you would like to adjust SIZE Turn off and set the size of PIP You can choose your preferred size of small large or PBP Picture Beside Picture Video Select video source of P
17. ROLS 1 Press the MENU button to see the BIER AUDIO gt BRIGHTNESS onscreen menu FEATURES COLOR AUTO PICTURE PERSONAL BRIGHTNESS lt RICH COLOR NATURAL CONTRAST gt SOFT SHARPNESS MULTIMEDIA TINT INSTALL gt CONTRAST SHARPNESS TINT 2 When PICTURE menu is highlighted press the CURSOR RIGHT button to PICTURE enter the PICTURE menu BRIGHTNESS 60 COLOR gt CONTRAST Press the CURSOR DOWN to choose SHARPNESS TINT 3 the item you want to adjust Auto Picture Brightness Color Contrast PICTURE AUTO PICTURE gt BRIGHTNESS gt COLOR il CONTRAST gt SHARPNESS TINT gt Sharpness or Tint Auto Picture Please refer to page 18 for details on Auto Picture PICTURE Settings AUTO PICTURE BRIGHTNESS gt Brightness Adjust to brighten the COLOR gt CONTRAST dark parts of the picture This SHARPNESS TINT appears to add white to the color Color Adjust to add or reduce PICTURE AUTO PICTURE gt color BRIGHTNESS COLOR Adj CONTRAST Contrast Adjust to sharpen the SHARPRESS TINT gt Picture quality The black portions of PHILIPS the picture become richer in darkness PICTURE AUTO PICTURE gt and the white become brighter BRIGHTNESS gt COLOR Sharpness Adjust to improve detail CONTRAST gt
18. RSOR LEFT button to adjust the item 6 Press the CURSOR DOWN button to select and adjust other sound controls Press MENU repeatedly to remove the menu from the screen adjustment of Treble and Bass will be stored into PERSONAL at Auto sound elf Stereo is not presented on a selected show and the TV is placed in Stereo mode the sound coming from TV will remain in Mono mode RUDIO RUTO SOUND SETTINGS STEREO gt INCREDIBLE SURROUND gt PERSONAL VOICE MUSIC THEATRE AUDIO AUTO SOUND gt INCREDIBLE SURROUND gt AUDIO TREBLE BASS BALANCE AUTO SOUND gt SETTINGS STEREO INCREDIBLE SURROUND gt MONO STEREO SAP AUDIO AUTO SOUND SETTINGS gt STEREO INCREDIBLE SURROUND AUL gt INCREDIBLE SURROUND AUDIO AUTO SOUND gt SETTINGS STEREO gt INCREDIBLE SURROUND gt AUL OFF Auro PICTURE CONTROL ether you re watching a movie or a video game W LCD TV has video control preset that will match with your current program source or content Auto Picture quickly resets your TV s video controls for a number of different types of programs and viewing conditions that you may have in your home The Personal Rich Natural Soft and Multimedia Auto Picture controls have been preset at the factory to easily adjust the TV s brightness color picture sharpness tint and color temperature levels
19. RSOR RIGHT to enter Press the CURSOR DOWN button to highlight PHILIPS any of the Movie Rating options When highlighted all these options can be ON blocked or OFF unblocked uv A 7 Press MENU repeatedly remove the menu from the screen HeLPFUL HINT When a rating is chosen to be blocked any higher level rating will also be blocked from viewing i e If R is selected to be blocked 17 and X will automatically be blocked When a rating is set to unblock only the selected rating will be unblocked Ratings lower will not automatically be unblocked Auro Lock TV RATINGS T AUTO Lock feature can block programming based on the TV Industry ratings Once you ve entered your access code and MAIN CONTROL the AUTO Lock features are displayed on the PICTURE PICTURE FORMAT AUDIO PICTURE ALIGNMENT screen FEATURES AUTOLOCK FEATURES PICTURE FORMAT gt LOCK PROGRAM PICTURE ALIGNMENT CHANG CODE AUTOLOCK CLEAR ALL BLOCK OPTION 1 Press the MENU button to see the Powie Renie onscreen menu TU RATING 2 Press the CURSOR DOWN button to AUTOLOCK highlight the FEATURES menu then ge ACCESS CODE press CURSOR RIGHT to enter 3 Press the CURSOR DOWN button to highlight AUTO LOCK then press CURSOR RIGHT to enter ACCESS CODE will appear on the screen RUTOLOCH LOCK PROGRAM gt V CHANGE CODE gt V7 CLEAR ALL gt G B
20. SHARPNESS Tint Adjust to obtain natural skin 60 tones 4 Press the CURSOR RIGHT or CURSOR LEFT button to adjust the item 5 Press the CURSOR DOWN button to select and adjust other picture controls 6 Press MENU repeatedly to remove the menu from the screen HeLPFUL HINT Any adjustment of Brightness Color Contrast or Sharpness will be stored into PERSONAL at Auto Picture section Souno Menu CoNrRors T adjust your LCD TV Sound select a channel and follow these steps PICTURE AUTO SOUND AUDIO SETTINGS 1 Press the MENU button to see the menu FEATURES gt STEREO INSTALL gt INCREDIBLE SURROUND AUL Press the CURSOR DOWN button to highlight the AUDIO menu 3 Press the CURSOR RIGHT button to enter the AUDIO menu 4 Press the CURSOR DOWN button to choose the item you want to adjust Auto Sound Set tings Stereo Incredible Surround AVL Auto Sound Please refer to page 18 for details on Auto Sound Settings Settings Allows you to adjust Treble Bass and Balance of the sound Stereo Adjust to select between Stereo Mono or SAP Incredible Surround Adds greater depth and dimension to TV sound Select from Incredible Surround or OFF AVL Auto Volume Leveler When On AVL will level out the sound being heard when PHILIPS sudden changes in volume occur during commercial breaks or channel changes 5 Press the CURSOR RIGHT or CU
21. annels available in your area If you do not run the auto program function to set up the channels your television may not operate properly Auro SETTING UP CHANNELS LCD can automatically set itself for local area or cable TV channels This makes it easy for you to select only the TV stations in your area by pressing the CH or CH button Press the MENU button on the remote control to show the onscreen menu Press the CURSOR DOWN button to highlight the INSTALL menu Press the CURSOR RIGHT button to enter the INSTALL menu Press the CURSOR DOWN button to highlight the AUTO PROGRAM control Press the CURSOR RIGHT button to start the AUTO PROGRAM scanning of channels Press the MENU button repeatedly to clear the menu from the screen after AUTO STORE has finished uu MAIN CONTROLS PICTURE gt LANGUAGE AUDIO gt TUNER MODE FEATURES gt AUTO PROGRAM INSTALL CHANNEL EDIT MANUAL FINE TUNE FACTORY RESET INSTALL LANGUAGE gt ANTENNA TUNERMODE CABLE AUTO PROGRAM gt 4070 CHANNEL EDIT gt MANUAL FINE TUNE gt FACTORY RESET INSTALL LANGUAGE TUNER MODE gt AUTO PROGRAM CHANNEL EDIT gt MANUAL FINE TUNE gt FACTORY RESET gt PLEASE WAIT PHILIPS PROG FOUND CHANNEL HINT Immediat
22. ceive repair on the product A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retailer included is considered such proof COVERAGE If this product is determined to be defective LABOR For a period of one 1 year from the date of purchase Philips will repair or replace the product at its option at no charge or pay the labor charges to any Philips authorized service center After the period of one 1 year Philips will no longer be responsible for charges incurred PARTS For a period of one 1 year from the date of purchase Philips will supply at no charge new or rebuilt replacement parts in exchange for defective parts Philips authorized service centers will provide removal and installation of the parts for one 1 year DISPLAY For a period of one 1 year from the date of purchase Philips will supply at no charge a new or rebuilt active display device in exchange for the defective display Philips authorized service centers will provide removal and installation of the parts under the specified labor warranty EXCLUDED FROM WARRANTY COVERAGE Your warranty does not cover Labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna systems outside of the product Product repair and or part replacement because of improper installation connections to improp
23. d out by qualified servicemen Improperor incorrect installation may render the set unsafe Disconnect mains plug when cleaning the TV screen never use abrasive cleaning agents there is a lightning storm the set is left unattended for a prolonged period of time Do not shift or move the LCD TV around when it is powered on Do not touch push or rub the surface of the LCD screen with any sharp or hard objects When the surface of the LCD screen becomes dusty wipe it gently with an absorbent cotton cloth or other soft material like chamois DO NOTUSE acetone toluene or alcohol to clean the surface of the screen These chemicals will cause damage to the surface Wipe off water or saliva as soon as possible These liquids can cause deformation and color fading of the LCD screen when left exposed for some time Be careful of condensation when temperature changes occur Condensation can cause damage to the LCD screen and electrically parts After condensation fades spots or blemishes will be present on the LCD screen CAUTION information is located on the inside of the VESA cover see diagram below To read information open the VESA cover POSITIONING THE LCD TELEVISON Place the LCD TV on a solid sturdy base or stand Be sure the stand is strong enough to handle the weight of the LCD TV Try to leave at least 6 of space around each side of the LCD TV cabinet to allow for proper ventilation Do not place t
24. dd or remove Cmm 6 In SKIPPED column press CURSOR PHILIPS RIGHT or CURSOR LEFT to select ACTIVE to add or SKIPPED to delete the channel you selected 7 Press the MENU button repeatedly clear the menu from the screen HINT Repeat steps 5 6 to add or delete additional channels to or from the LCD TV s memory bd Factory RESET TV can be reset to the original factory settings by performing the following steps MAIN CONTROLS PICTURE LANGUAGE AUDIO gt TUNER MODE 1 Press the MENU button on the FEATURE c INSTALL INSTALL CHANNEL EDIT remote control to see the onscreen MANUAL FINE TUNE LANGUAGE gt NO FACTORY RESET TUNER MODE gt VES menu AUTO PROGRAM CHANNEL EDIT gt MANUAL FINE TUNE gt FACTORY RESET 2 Press the CURSOR DOWN button to highlight the INSTALL menu then press CURSOR RIGHT enter Press the CURSOR DOWN button repeatedly to highlight the FACTORY RESET control then press CURSOR RIGHT to enter Press CURSOR DOWN to select YES to reset the original factory settings AUTO Press the MENU button repeatedly to clear the menu from the screen ud Ce 5 HINT If you reset the TV to the factory settings all your present setting on picture audio Close Caption and other feature settings will be erased and replac
25. e TUNER MODE control for the correct tuner setting Try running the Auto Program feature to find all available channels Press the AV button on the remote to make sure the correct signal source is selected f using an accessory device be sure that it is functioning properly If in PC Mode a video signal MUST BE present or the TV will turn off No Sound Check the VOLUME buttons Check the MUTE button on the remote control If you re attempting to hook up auxiliary equipment check the audio jack connections No AV Signal Check whether AV and S Video sockets connected simultaneously If they are disconnect the S Video socket AV signal automatically overrides the S Video signal if both sockets are connected simultaneously 3l S VHS Color Becomes Faint Unplug socket for S Video connection Reconnect the S Video socket of the TV carefully to the VCR socket TV Only Produces MONO Sound If using a cable box with RF only type connections the signal coming from the cable box will be produced in MONO only Check Sound control setting Change setting to Stereo Remote Does Not Work Check the batteries Place lithium cell in the remote Be sure the and ends of the batteries line up as marked inside the battery compartment Clean the remote control and the remote control sensor window on the TV Check the TV power cord Unplug the TV wait 10 seconds then reinsert the plug into t
26. ed by the manufacture s default settings However your AutoLock access code will not be erased Please refer to page 19 for details UNFOLD THE BASE Bee proceed to install your new LCD please follow the steps and diagrams as shown to familiarize yourself with the correct and safe way of unfolding the base Place the set facing down on a flat surface and a protective sheet 2 Unfold the base following the direction as shown on the diagram 3 Place the set upright you LCD TV is now ready for install HeLPFUL HINT Expanding the base requires a degree of force please use sufficient force to unfold the base When unfolding the base place the TV on a flat sturdy surface before expanding the base INSTALLING Lco TV ON THE WALL Vesa Complied Mounting The stand of your LCD TV complies with VESA standard if you intend to install the LCD TV on the wall please consult a professional technician for proper installing The manufacture accepts no liability for installations not performed by professional technician 15 75X75 mm 20 100x100 mm Easy wall mounting Smart tips Use the full scale template to mark on the wall the horizontal distance between the two mounting screws Note The surface for mounting area must be flat and larger then the pedestal The wall must support a pull force of 10 kg for each screw
27. ely after unpacking and plugging in your new television run the auto program function to set up the TV for the broadcast or cable channels available in your area If you do not run the auto program function to set up the channels your television may not operate properly After you ve run Auto Program check out the results Press the CURSOR DOWN or the CURSOR UP button and see which channels you can select Remember an antenna or cable TV signal must first be connected to your LCD TV RUTO STORE START x CHANNEL Epit CONTROL DA Edit control lets you edit the channel listing You can add or remove a channel in the LCD TV s memory MAIN CONTROLS PICTURE gt LANGUAGE AUDIO gt TUNER MODE LOLI FEATURES AUTO PROGRAM LANGUAGE CHANNEL INSTALL CHANNEL EDIT TUNER MODE SKIPPED MANUAL FINE TUNE AUTO PROGRAM Press the Menu button to open the FACTORY RESET CHANNEL EDIT MANUAL FINE TUNE gt onscreen menu FACTORY RESET CHANNEL EDIT SKIPPED 2 Press the CURSOR DOWN button to highlight the INSTALL menu then press CURSOR RIGHT to enter CHANNEL EDIT CHANNEL ACTIVE SKIPPED 3 Press the CURSOR DOWN button to enter the CHANNEL EDIT menu then press CURSOR RIGHT to enter 4 Press the CURSOR DOWN button to enter the CHANNEL EDIT menu Ca 5 In CHANNEL column press CURSOR RIGHT or CURSOR LEFT to select the C33 channel you wish to a
28. en when the sound is muted E Volume button Press to increase or decrease the sound level Auto Sound button Press repeatedly to select among the 4 settings Personal Voice Music or Theatre Number buttons Press the number buttons for direct access to the TV channels For a 3 digit channel enter the first digit followed the next 2 digits Auto Picture button Press repeatedly to select either Personal Rich Natural Soft or Multimedia picture setting PHILIPS AV button Press to select the video input source PC DVI TV AV S Video HD Surf Button Press to select previously viewed channels You can place up to 8 channels in memory Then by pressing the SURF button you can quickly view the select channels TIMER MENU CONTROLS DA 1 Press the SLEEP button on the remote control to show the onscreen menu SLEEP OFF 2 Press the SLEEP button repeatedly to select your requiring sleep timing SLEEP 15 MIN SLEEP 240 MIN POWER STATUSIEXIT C3 ae Cw lt GD Je Le CG CIJ n Cs i Eos Cn PHILIPS HINT IMPORTANT For the Timer to function the set must not be turned off Once the set is turned off the Timer is disabled TV Picture MENU ConTROLS T adjust your LCD TV picture select a channel and follow these steps MAIN CONT
29. er voltage supply abuse neglect misuse accident unauthorized repair or other cause not within the control of Philips product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications Damage occurring to product during shipping when improperly packaged or costs associated with packaging Product lost in shipment and no signature verification of receipt can be provided A product used for commercial or institutional purposes including but not limited to rental purposes Products sold AS IS or RENEWED TO OBTAIN WARRANTY SERVICE IN THE U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact Philips Customer Care Center at 1 888 PHILIPS 1 888 744 5477 TO OBTAIN WARRANTY SERVICE IN CANADA 1 800 661 6162 French Speaking 1 888 PHILIPS 1 888 744 5477 English or Spanish Speaking REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANT Y Some states do not allow the exclusions o
30. ermanently 32 Auto Program 2 63 ER nh 7 8 31 Balance epp 17 28 ae 16 28 Batteries is 3 13 3l Blocking e I9 Brightness n eR E REUS 16 27 18 and Cleaning 32 Channel Edit e etes ote et 9 Closed Captions sese etr hm n emt sasaa tenda 26 Colo EE 4 16 18 27 31 32 Factory Re eto VV cub 33 C 6 18 19 Limited Warranty ise si ree hebt Rep tie teva 35 cea S 14 28 31 Regulatory 34 S SOUNG wei esas 14 17 18 28 30 Sotind Mode pres 14 18 Stel O 14 17 28 31 Table of Contents nene meme enis 5 METER TN 16 18 tre d 17 28 Troubleshooting oi sr eles 31 TV Operation Basic 13 Warranty sic asyet naa 35 Welcome EE PR EE eee 2 33 REGULATORY FEDERAL COMMUNICATIONS Commission FCC Notice U S OnLy This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reaso
31. h could ultimately overturn the product heat registers stoves or other apparatus including Also do not endanger yourself or children by placing amplifiers that produce heat electronic equipment toys on the top of the cabinet Such 9 Do not defeat the safety purpose of the polarized or items could unsuspectingly fall from the top of the set and grounding type plug A polarized plug has two blades with cause product damage and or personal injury one wider than the other A grounding type plug has two 18 Wall or Ceiling Mounting The appliance should be blades and third grounding prong The wide blade or third mounted to a wall or ceiling only as recommended by the prong are provided for your safety When the provided manufacturer plug does not fit into your outlet consult an electrician 19 Power Lines An outdoor antenna should be located for replacement of the obsolete outlet away from power lines 10 Protect the power cord from being walked on or pinched 20 Outdoor Antenna Grounding If an outside antenna is particularly at plugs convenience receptacles and the connected to the receiver be sure the antenna system is point where they exit from the apparatus grounded so as to provide some protection against voltage Only use attachments accessories specified by the surges and built up static charges manufacturer Section 810 of the National Electric Code ANSI NFPA 12 Use only with a cart stand tripod bracket No 70 198
32. he LCD TV near a radiator or other sources of heat Do not place the LCD TV where it can be exposed to rain or excessive moisture RECYCLING PROCEDURE END OF LIFE DISPOSAL To minimize harm to the environment the batteries supplied with the LCD TV do not contain mercury or nickel cadmium If possible when disposing of batteries use recycling means available in your area The LCD TV uses materials that can be recycled To minimize the amount of waste in the environment check your area for companies that will recover used televisions for dismantling and collection of reusable materials or contact your dealer for TV recycling tips Please dispose of the carton and packing material through the proper waste disposal management in your area 5 Introduction Welcome Registration of Your TV 2 IMPORTANT SAFETY INSTRUCTIONS 3 PRECAUTIONS EE cma E E PRODR ed 4 Table of Contents esce rrt ret 5 Installation Language 6 Tuner Mode 7 Auto Program Setting Up 8 Channel Edit Control To Add or Delete channels 9 Pet PEE ERA 10 Unfold the Bases ose eee bere ee Al Installing LCD TV on the 12 Basic TV and Remote Control Operations 13 Remote Control e eesrr er pices
33. he outlet and push the POWER button again Be sure the fuse is not blown on the AC power strip if one is being used Check to be sure the TV outlet is not on a wall switch Be sure that the remote is in the correct operating mode Be sure the remote is pointed at the Remote Sensor Window on the TV See page 3 of the Quick Use Guide for details TV Displays Wrong Channel or No Channels Above 13 Repeat channel selection Add the desired channel numbers using the CHANNEL EDIT control into the TV s memory Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels Care AND CLEANING WARNING concerning stationary images on the TV Screen Do not leave fixed images on the screen for extended periods of time This can cause uneven aging of the LCD panel Normal use of the TV should involve viewing of programs that have constantly moving or changing images Do not leave still images on screen for extended periods of time Do not display the same images too frequently if you do subtle ghost images can be left on the LCD screen Sources of stationary images may be Laser discs video games Compact Discs Interactive CD i or paused Digital Video Discs DVDs or video tapes Here are some common examples of stationary images DVD menus list DVD content Letterbox black bars appear at the top and bottom of the TV screen when a wide
34. industry What s more your purchase guarantees you ll receive all the information and special offers for which you qualify plus easy access to accessories from our convenient home shopping network Most importantly you can count on our uncompromising commitment to your total satisfaction All of this is our way of saying welcome and thanks for investing in a PHILIPS product P S To get the most from your PHILIPS purchase be sure to complete and return your Warranty Registration at once Product Safety By registering your product you ll receive notification directly from the manufacturer in the rare case of a product recall or safety defect Additional Benefits of Product Ownership Registering your product guarantees that you ll receive all of the privileges to which you re entitled including special money saving offers Know these safety symbols RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To
35. lt code Auro Lock MOUIE RATING lt OFF PG gt ON P613 gt NC17 gt TU RATING y OFF v7 ON MOVIE RATINGS G General Audience All ages admitted Most parents would find this program suitable for all ages This type of programming contains little or no violence no strong language and little or no sexual dialog or situations PG Parental Guidance Suggested This programming contains material that parents may find unsuitable for younger children It may contain one or more of the following moderate violence some sexual situations infrequent coarse language or some suggestive dialog 13 Parents Strongly Cautioned This programming contains material that parents may find unsuitable for children under the age of 13 It contains one or more of the following violence sexual situations coarse language or suggestive dialog R Restricted This programming is specifically designed for adults Anyone under the age of 17 should only view this programming with an accompanying parent or adult guardian It contains one or more of the following intense violence intense sexual situations strong coarse language or intensely suggestive dialog NC 17 No children under the age of 17 will be admitted This type of programming should be viewed by adults only It contains graphic violence explicit sex or crude indecent language X Adults Only
36. n again Repeat steps throught 3 to add more channels up to 8 to the SURF list HINT Along with regularly programmed channels the external video source connections can be added to the SURF list This means that the external Jacks and their channels can be added to your SURF list Use the AV button to tune their channel and use the same steps described on this page to add those channels to the Surf list SURF EDIT 1 22 ADD SURF LIST EMPTY POWER STATUS EXITT Ceu voL PHILIPS 25 SURF EDIT 22 Delete SURF EDIT 22 36 Add SURF EDIT 22 36 Delete gt CLoseD CAPTIONS C Captioning CC allows you to read the voice content of television programs on __ CONTROL P PICTURE PICTURE FORMAT the TV screen Designed to help the hearing impaired AUDIO gt lt PICTURE ALIGNMENT FERTURES AUTOLOCK FEATURES this feature uses onscreen text boxes to show INSTALL CLOSED CAPTION aac a COLOR TEMP PICTURE ALIGNMENT CHANG CODE AUTOLOCK CLEAR ALL CLOSED CAPTION BLOCK OPTION COLOR TEMP MOUIE RATING TU RATING dialogue and conversations while the TV program is in CLOSED CAPTION CAPTION MODE CC DISPLAY gt POWER Press the MENU button to see the onscreen menu Press the CURSOR DOWN button to highlight the FEATURES
37. nable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Use only RF shielded cable with ferrite core when connecting this monitor to a computer device 34 PuiLiPs LiMiTED WARRANTY One 1 Year Labor amp 1 Year Parts amp One 1 Year Display Repair PHILIPS warrants this product against defect in material or workmanship subject to any conditions set forth as follows PROOF OF PURCHASE You must have proof of the date of purchase to re
38. nscreen sound control menu PHILIPS Rich Natural Soft Multimedia Voice Music Theatre he AUTO Lock feature is an that receives and processes data sent by broadcasters or other program providers that contain program content advisories When programmed by the viewer a TV with AUTO Lock can respond to the content advisories and block program content that may be found objectionable such as offensive language violence sexual situations etc This is a great feature to censor the type of viewing children may watch AUTO Lock offers various BLOCKING controls from which to choose Access Code An Access Code must be set to prevent children from unblocking questionable or censored programming set by their parents Block Enable After an access code has been programmed you can block programming depending on the received rating and user setting Movie Ratings Certain blocking options exist which will block programming based on ratings patterned by the Motion Pictures Association of America TV Ratings Just like the Movie Ratings programs can be blocked from viewing using standard TV ratings set by TV broadcasters HeLPFUL HINT Remember that 0711 is the default AutoLock code If your access code has been changed by someone other than you a child for example or you have forgotten the code you can always get in by inputting the defau
39. ode has been changed by someone other than you a child for example or you have forgotten the code you can always get in by inputting the default code NOTE TO PARENTS It is not possible for your child to unblock a channel without knowing your access code or changing it to a new one If your code has been changed without your knowledge then you will become aware that blocked channels may have been viewed 20 Auro Lock PROGRAM fter your personal access code has been set see the previous page you are ready to select the channels or inputs you want to block out or censor 1 2 3 4 5 6 Press the MENU button to see the onscreen menu Press the CURSOR DOWN button to highlight the FEATURES menu then press CURSOR RIGHT to enter Press the CURSOR DOWN button to select AUTO LOCK then press the CURSOR RIGHT to enter Use the Number buttons to enter your access code Press the CURSOR RIGHT LEFT button to block current selected channel or CURSOR RIGHT LEFT button to unblock a channel Press MENU repeatedly to remove the menu from the screen Note You can block additional channels by using Number buttons to jump to another channel MAIN CONTROL PICTURE gt PICTURE FORMAT AUDIO gt PICTURE ALIGNMEN FEATURES AUTOLOCK INSTALL gt CLOSED CAPTION COLOR TEMP POWER STATUSIEXIT AUTO PHILIPS 21 FEATURES PICTURE FORMAT gt PICTURE ALIG
40. ows the viewer to read TV program dialog or voice conversations as on screen text On screen Menus Helpful messages in English Spanish French or Portuguese for setting controls Remote Control Works your LCD TV features Sleep Timer Turns off the LCD TV within an amount of time you specify 15 240 minutes from the current time AutoLock Lets you block viewing of certain TV channels if you do not want your children viewing inappropriate material Standard broadcast VHF UHF or Cable TV channel capability Stereo capability Includes a built in amplifier and twin speaker system allowing reception of TV programs broadcast in stereo Treble Bass and Balance Enhance the LCD TV s sound NOTE This manual covers different versions and models Not all features described this manual will match those of your LCD TV This is normal and does not require you contacting your dealer or requesting service Enp oF Lire DisPosAL Your new LCD TV and its packaging contain materials that can be recycled and reused Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts that need to be properly disposed Your product also uses batteries that should not be thrown away when depleted but should be handed in and disposed off as small chemical waste When you replace your existing equipment please find out about the local regulations regarding disposal of your old
41. r limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you In addition if you enter into a service contract agreement with the PHILIPS partnership within ninety 90 days of the date of sale the limitation on how long an implied warranty lasts does not apply This warranty gives you specific legal rights You may have other rights which vary from state province to state province Philips Box 671539 Marietta Ga 30006 0026 35 Warranty 4835 710 28375
42. rmation alkaline etc please contact your local authorities or the Electronic Remove batteries when the unit is not used for a long Industries Alliance www eiae org time 16 Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain D The appliance does not appear to operate normally or Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS HLECTRIE SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H PRECAUTION ADDITIONAL SAFETY PRECAUTIONS ENSURE that LCD TV stand is tightened properly to the set See Quick Guide on the right way of tightening of the screw of the stand to the set Improper tightening of screw may render the set unsafe If LCD TV is installed on the wall installation should be carrie
43. screen 16 9 movie is viewed on a TV with standard 4 3 aspect ratio This is available with some DVDs Video game images and scoreboards Television station logos cause a problem if they are bright and stationary Moving or low contrast graphics less likely to damage the picture tube Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news Shopping channel logos pricing displays may be bright and may appear constantly during the show These are usually in the same location on the TV screen TV Location To avoid cabinet warping cabinet color changes and an increased chance of TV failure do not place the TV where temperatures can become excessively hot for example in direct sunlight or near a heating appliance Allow a free flow of air around the TV Cleaning To avoid possible shock hazard remove the TV s power cord from the electrical outlet before cleaning Regularly dust the TV with a dry non scratching duster When cleaning the TV take care not to scratch or damage the screen surface Avoid wearing jewelry or using anything abrasive Do not use household cleaners Wipe the screen with a clean cloth dampened with water Use even easy vertical strokes when cleaning Occasionally vacuum the vents on the rear of the TV Never use thinners insecticide sprays or other chemicals on or near the cabinet They may blemish the cabinet p
44. television batteries and packing materials ey INSTALLATION Wi operate INSTALL function the access code window will appear on the screen Press default code 0711 your personal code setting to enter this menu ey LANGUAGE SETTINGS English French Spanish or Portuguese speaking TV owners an onscreen LANGUAGE option is present The LANGUAGE control enables MAIN CONTROLS you to set the TV s onscreen menu to be shown in PICTURE gt LANGUAGE i AUDIO gt TUNER MODE r either English French Spanish or Portuguese INSTALL INSTALL CHANNEL EDIT UANGUAGE ENGLISH MANUAL FINE TUNE TUNER MODE FRANCAIS FACTORY RESET AUTO PROGRAM gt ESPANOL CHANNEL EDIT gt PORTUGUES MANUAL FINE TUNE gt FACTORY RESET Press the MENU button on the remote control to open the onscreen menu STATUSIEXIT Press the CURSOR DOWN button to highlight the INSTALL menu LANGUAGE Press the CURSOR RIGHT button to enter LANGUAGE Press CURSOR DOWN button to select English French Spanish or Portuguese then press the CURSOR RIGHT to confirm 3 Press the CURSOR RIGHT button to Highlight 5 Press the MENU button repeatedly to clear the menu from the screen PHILIPS HiNT Remember the LANGUAGE control makes only the TV s onscreen MENU items appear in English French Spanish or Portuguese text It does not change the other onscreen te
45. ust to brighten the darkest parts of the picture Contrast Adjust to sharpen the Picture quality The black portions of the picture become richer in darkness and the white become brighter Auto Adjust The LCD Monitor will automatically adjust to the best image position phase and clock setting Manual Adjust The Manual Adjust control allow you to manually fine tune the image as it appears on the screen Phase eliminates the horizontal interfering lines Clock eliminates the vertical interfering lines Horizontal adjust the horizontal placement of the picture Vertical adjust the vertical placement of the picture the item Press MENU repeatedly to remove the menu from the screen Press the CURSOR RIGHT LEFT button to adjust 27 MAIN CONTROLS PICTURE COLOR TEMP AUDIO BRIGHTNESS FEATURES CONTRAST INSTALL AUTO ADJUST MANUAL ADJUST PICTURE COLOR TEMP NORMAL BRIGHTNESS gt COOL CONTRAST gt WARM STATUSIEXIT AUTO ADJUST gt MANUAL ADJUST gt PICTURE COLOR TEMP gt BRIGHTNESS CONTRAST gt AUTO ADJUST gt MANUAL ADJUST gt POWER ce m PICTURE COLOR TEMP gt BRIGHTNESS gt CONTRAST AUTO ADJUST gt MANUAL ADJUST PICTURE COLOR TEMP gt BRIGHTNESS gt CONTRAST gt AUTO ADJUST NES MANUAL ADJUST gt PICTURE COLOR TEMP BRIGHTNESS gt CONTRAST gt AUTO ADJUST gt MANUA
46. xt features such as Closed Captioning CC with TV shows TUNER CoNrRoL y ps Tuner Mode allows you to change the LCD TV s signal input to Cable or Air antenna It s important for the LCD TV to know if you want to receive channels from a cable TV signal or an MAIN CONTROLS PICTURE LANGUAGE antenna signal INSTALL FEATURES AUTO PROGRAM LANGUAGE gt ANTENNA INSTALL CHANNEL EDIT CABLE MANUAL FINE TUNE AUTO PROGRAM AUTO FACTORY RESET CHANNEL EDIT gt 1 Press the Menu button to see the onscreen menu MORTAL PNE TUNE i Press the CURSOR DOWN button to highlight 2 the INSTALL menu Power STATUSIEXTT Press the CURSOR RIGHT button to enter the INSTALL menu Press the CURSOR DOWN button to highlight 4 the TUNER MODE menu then press CURSOR RIGHT to confirm zm CEJ Press the CURSOR DOWN buttons to select CABLE ANTENNA or AUTO then press CURSOR RIGHT to confirm oe Cw C83 6 Press the MENU button repeatedly to clear the eS menu from the screen HeLPFUL HINT When CABLE is selected channels 2 125 are available When ANTENNA is selected channels 2 69 are available When AUTO is selected your LCD TV will search automatically for antenna or cable channels Immediately after unpacking and plugging in your new television run the AUTO PROGRAM function to set up the TV for the broadcast or cable ch
Download Pdf Manuals
Related Search