MANUAL - StevesPages.com
Contents
1.2. SUREFIRE FLASHLIGHTS MOMENTARY 81777218782 TAILCAP SWITCH Lock OuT BASIC S RE FIRE FEATURES Features on various SureFire flashlight models may differ but their operation is similar The C2 Centurion is shown because it encompasses TAILcAP many features available in our high performance flashlights STAINLESS STEEL POCKET CLIP XENON HALOGEN COMBATLIGHT BODY LAMP ASSEMBLY AND RUBBER GRIP RING WITH TUNGSTEN FILAMENT LITHIUM BATTERIES PRE FOCUSED METALLIC VAPOR COATED REFLECTOR TEMPERED PYREX LENS WITH i SureFire C2 Centurion Exploded View 3 ANTI REFLECTIVE COATING QUICK START GUIDE BATTERY INSTALLATION Unscrew the tailcap to install or replace the batteries LOCK OUT TAILCAP Models with a lock out tailcap are shipped with machined marks aligned in the lock out position to prevent accidental activation To unlock and place in momentary on position rotate the tailcap clockwise approximately one turn MOMENTARY ON Depress the tailcap pushbutton to activate the light in momentary mode CONSTANT ON From the momentary on position rotate the tailcap clockwise approximately one half turn to achieve constant on activation CAUTION CAUTION Lithium batteries can explode or cause burns if disassembled shorted recharged exposed to water fire or high temperatures Do not place loose batteries in a pocket pu
3. damages arising out of or in connection with product use or performance For repair or replacement contact Customer Service at 1 800 828 8809 toll free or 1 714 545 9444 and obtain a Return Merchandise Authorization number RMA Then package the unit carefully and return to SureFire LLC Repairs Department RMAF 5 _ 17680 Newhope Street Suite B Fountain Valley CA 92708 No COD s please SureFire will pay any reasonable shipping costs to return the untt to you FLA S H 1 GH 1 ACCESSORIES SureFire Lithium Batteries Optimized for use in SureFire flashlights Spares Carrier Holds lithium batteries and a replacement lamp in a watertight case Lanyard included Speed Holster Carries light bezel up or bezel down Holsters Choose from nylon and leather holsters Lanyard Kit Attaches between body and tailcap or bezel for secure retention Colored filters FM Series Red Blue and Infrared e Diffusion Filter For a wider softer beam ZA Orange Directing Wand Rechargeable Conversion Kit Convert your flashlight to a rechargeable Turbo Conversion Kit Concentrates beam for long range use LED Conversion Heads Convert to a long running LED light Click On Tailcap Click the light to constant on without having to rotate the tailcap lam Si UREFIRE 18300 MOUNT BALDY CIRCLE FOUNTAIN VALLEY CA 92705 S00 86828 88s09 SUREFIRE COM
4. environment lubricate O rings frequently to maintain watertight seal After prolonged exposure to moisture the bezel lamp and batteries should be removed inspected and dried if necessary LAMP REPLACEMENT Rotate bezel head counter clockwise to remove Remove lamp reflector assembly and replace with recommended assembly CAUTION CAUTION SureFire flashlights produce substantial heat during operation Do not leave activated flashlight unattended Do not set activated flashlight face lens down Do not place activated flashlight against combustible material or material that could be damaged by heat Do not hold bezel or lens of activated flashlight against any portion of human body Keep away from children Ensure that the flashlight cannot be turned on when stored or being transported If the lamp is activated while in a case or other container the lamp could overheat and cause damage to surrounding materials For models not equipped with a lock out feature remove the batteries or unscrew the bezel enough to prevent accidental activation Do not touch a hot lamp assembly Allow it to cool before handling Avoid touching reflector surface SureFire lamp assemblies are pressurized Always wear safety glasses when handling LAMP REPLACEMENT GUIDE FOR TWO BATTERY FLASHLIGHTS HIGH OUTPUT ULTRA HIGH OUTPUT P60 Lamp Assembly P61 Lamp Assembly Runtime lumen output Runtime lumen output One hour 6
5. 5 lumens 20 minutes 120 lumens FOR THREE BATTERY FLASHLIGHTS HIGH OUTPUT ULTRA HIGH OUTPUT P90 Lamp Assembly P91 Lamp Assembly Runtime lumen output Runtime lumen output One hour 105 lumens 20 minutes 200 lumens REW 13 1 REV DESCRIPTION B SEEECO1 78 C SEEECO1 7C THE SUREFIRE DIFFERENCE SureFire strives to design and manufacture lights of ever increasing brightness and quality while setting new standards for maximum power with minimal size Three things characterize every product compact size extreme ruggedness and a flawless high output beam Every SureFire illumination tool is guaranteed to produce a perfect center spot of intense light surrounded by a smooth corona of softer light REVISIC TUNGSTEN FILAMENTS WITH XENON HALOGEN GAS To achieve maximum light output SureFire lamps feature a tungsten filament in a high pressure xenon halogen gas atmosphere METAL VAPOR COATED REFLECTORS To achieve a perfect beam free of dark rings and shadows reflectors are coated with a proprietary finish that causes light to bounce off the reflector at varied angles and cancel out any beam irregularities PRE FOCUSED REFLECTORS No need to twist the bezel to adjust the beam it s already perfectly pre focused Lamps and reflectors are individually mated and hand adjusted to within 005 for optimum beam quality at all distances LITHIUM BATTERIES In addition to packing a lot of power into a small space Su
6. reFire disposable lithium batteries have a ten year shelf life Put a lithium powered light in a drawer and years later it will still work RUGGED CONSTRUCTION SureFire lights are CNC machined from aerospace grade aluminum or molded from Nitrolon a proprietary polymer that is non conductive and extremely resistant to corrosion and impact Available finishes include a Military Specification Type 111 hard anodizing Lamps will burn out batteries will be used up and switches for WeaponLights eventually need to be 1 Everything else is covered by our g b lifetime no hassle guarant If it breaks we fix it WARRANTY SureFire warrants its products to be free from defects in materials and workmanship SureFire will repair or replace at its option and without charge any product or part which is found to be defective under normal use and service Such repair or replacement shall be the purchasers sole and exclusive remedy under this warranty This warranty does not include normal maintenance and services and does not apply to any products or parts which have been subject to modification misuse negligence accident improper maintenance or repair by anyone other than SureFire WARRANTY LIMITATION There is no other express warranty SureFire hereby disclaims any and all implied warranties including but not limited to fitness for a particular purpose SureFire shall not be liable for incidental consequential or special
7. rse or other container containing metal objects mix with used or other battery types or store with hazardous or combustible materials Store in cool dry ventilated area Follow applicable laws and regulations for disposal BATTERY INSTALLATION Q LLLLLA 77777775 Z ZLA LLLA ZAA 77 77777 LOCK OUT TAILCAP ON De Rx CONSTANT ON DETAILED OPERATING INSTRUCTIONS BATTERY INSTALLATION Unscrew the tailcap and insert new batteries Replace tailcap and depress tailcap pushbutton switch to test If light fails to function the tailcap may be in the lock out position excluding the G2 Nitrolon which does not feature a lock out tailcap Rotate the tailcap clockwise until momentary activation is possible LIGHT ACTIVATION For momentary light press the tailcap pushbutton switch The light will stay on as long as the pushbutton is pressed Rotate the tailcap clockwise for constant on light LOCK OUT TAILCAP PAT 6222138 From the momentary on position rotate the tailcap approximately 180 counter clockwise The lock out position prevents accidental activation during storage or transport MAINTENANCE At least twice yearly clean threads and O rings with clean cloth and apply a thin coat of silicone based grease or lubricant to both If flashlight is used in wet
Download Pdf Manuals
Related Search