st2s operation
Contents
1. Products that have been altered or modified e Any product whose identifying number decal serial number etc has been altered defaced or removed Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper support and service Any Russound product purchased from an unauthorized dealer or other source including retailers mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product Damage to or destruction of components due to application of excessive power voids the warranty on those parts In these cases repairs will be made on the basis of the retail value of the parts and labor To return for repairs the unit must be shipped to Russound at the owner s expense along with a note explaining the nature of service required Be sure to pack the unit in a corrugated container with at least three 3 inches of resilient material to protect the unit from damage in transit Before returning a unit for repair call Russound at 603 659 5170 for a Return Authorization number Write this number on the shipping label and ship to Russound ATTN Service 5 Forbes Road Newmarket NH 03857 Due to continual efforts to improve product quality as new technology and techniques become avail able Russound FMP I2. 28 29 Factory InitlallZatiQInazas iaia 29 SV SUOMI 30 Tuner Setup Menu for SIRIUS rioni anecdotes 30 Memory M CIIM 30 Bank 30 cua a PH 32 DIASNOSUGS titani 32 Factory InitlallZatiQIn aaa 32 33 Tm 33 Tuner Setup Men for AM FM en benda den 34 Memory siriana a 34 Bank NAIM Cisse fis 34 acc N RENE e 34 35 Back p ahnd ReStOle zia reds iaia vaio 35 Programming for CAV6 6 USE nnne nnne nnn nnn inris nennen nennen nnn enn 36 Technical Specifications ii 37 Warranty ICE PME EMT 38 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2S Smart Tuner Whether you are adding radio to an existing system expanding a CAi Series system or taking advantage of the CAV6 6 s robust RNET9 communication link the ST2S Tuner is designed to meet your needs The 5125 Tuner is like having two radios in one The AM FM tuner provides broadcast of local AM FM stations and the SIRIUS tuner delivers all the diversity and choices available to SIRIUS radio subscribers The two modules share one set of controls and display on the front of the unit but each runs independently This arrange ment allows two different broadcasts at the same time in a
3. i veces cm ito ech da eene aerem pha tein Y iunt ob corde pa eT salle 8 ST2S Setup and Connections BasiC Connectloris uos oct o Dee ecd ed a D e o a dr a i b s reet Ta 9 ST2 KP and CAI Connections ii 10 GAVO 6 Connections cecidere rtt ne aaa 11 Antenna Connecuons siii 12 14 5125 Operation SIRIUS Radio Activation iii 15 SIRIUS Radio DISp ays s wien e rms Re dee teure aD 15 SIRIUS Radios MOdES calici sii 16 Bii M 17 Category Sanh ied e nd ems io a ade iu E HO ra rd ER EP red eua 17 18 NOW PAVING Aia tee 18 Display Preferences ss ect t d ctu ec ree er RE E EM E Nee RR RN 19 SRUSID EE PEN 19 Channel LocK cem RE 20 Front Panel CONtrolS titt bet n eet eet duet d een te cd ens 21 SITZ RC Remote Control aaa e o ctus E pes Eres 22 ST2 KP Keypad Controls etri med canny rd m e ra ar tee ec e d qe e ere Br 23 UNO S2 Keypad Controls with CAV6 6 ccccccccscccsscccssececseescsseecsseescseesseeesseeesaeeesseesssseeessaeesaees 24 25 UNOLRGL Remote Control with CAMO O i cta iaia 26 27 ST2S Tuner Programming STZ Chassis Setup Men sionen Se em eec e rx tees e RR Alas 28 Source NUMDE sss intei daa seo nut i e aser east anna 28 Update Eee Ee tet
4. ed label SIRIUS green or AM FM amber to indicate the active tuner In addition the LCD panel is also backlit green for Tuner 1 and amber for Tuner 2 Each time a tuner is selected the display will refresh with the current station or preset and all subsequent memory preset entries will be associated with that selected tuner Selecting the desired band AM FM only Push to switch between AM and FM reception Selecting a mode SIRIUS Push to select an SIRIUS operating mode Exiting a mode SIRIUS Push to exit the SIRIUS mode selection menu Signal Strength mode SIRIUS Press and hold and release The display shows the signal strength rating To exit press e Selecting the desired frequency or channel Press and release and for manual tuning Selecting Stereo or Mono Output AM FM only Press and release to toggle between stereo and mono mode STEREO or MONO appears briefly on the screen when selecting mode Selecting Distant or Local Reception AM FM only Press and hold to toggle between distant and ST2S OPERATION FRONT PANEL CONTROLS local mode DISTANT or LOCAL appears briefly on the screen when selecting mode Normal operation is in Distant mode In cities antennas can pick up multi path signals when they bounce off buildings and get doubled The Local mode limits the noise associated with these reflected signals Bank Memory Presets Each tuner has six banks of preset memory settings and each bank
5. which must be set up as two sources There are two IR connections one for each tuner in the ST2S You will need two IR link cables Russound P N 09 0508 for these connections There is a unique IR code set each for Tuner 1 and Tuner 2 which allow each to be controlled independently These codes can be learned from the ST2 RC remote into learn ing capable remotes and keypads If you are using an IR controlled system from another manufacturer installation should be sim ilar The ST2S IR codes may be learned into many other manufacturers remote controls that have learning capability for unified control over the audio video equipment BASIC CONNECTIONS ST2 KP Keypad to ST2S Connection Non RNET System Note ST2 KP keypads are designed for use with IR controlled systems non RNET systems When the ST2S Tuner is a component of an RNET system such as CAV6 6 the RNET system keypads are used The ST2 KP connects to the ST2S tuner with CAT 5 cable using an RJ 45 T5684 jack on the tuner connection end of the cable Be sure to use the keypad ports for the ST2 KP and NOT the RNET link ports The 5125 tuner supports up to two ST2 KP keypads An SA ZX3 Keypad Splitter can be used to add additional keypads Rack Mount Installation The 5125 can be mounted in a standard compo nent rack using the rack ears provided Line the rack ear s two rows of screw holes with the three screw holes on the side of the tuner Use the screws
6. Initialization SIRIUS The Factory Initialization procedure allows the erasure of all programmed settings of the SIRIUS tuner and returns them to the factory default set tings 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE BAND 3 MEMORY NAME appears Press MEM Up Down until FACTORY INIT appears on the tuner 4 Press MODE BAND to enter the FACTORY INIT menu 5 Are you sure appears on the tuner Using the Tune Up Down buttons view the Yes and No selections 6 Press MODE BAND to select A No selection returns to the top of the Factory Init menu A Yes begins the initialization 7 Please wait appears on the tuner during the process and Cycle Power appears when com plete 8 Cycle power on the 5125 tuner System Info SIRIUS The System Info menu shows the SIRIUS module Press Select button to select Sirius Tuner ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU manufacturing build properties 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MEM Up Down until SYSTEM INFO appears on the tuner Press MODE BAND Press MODE BAND at Build Time to view Press MEM Up Down to advance Press MODE BAND at Build Date to view Press MEM Up Down to advance Press MODE BAND at Version to view Press SELECT to exit the System Info menu 0 00 4 OY O1 END OF SIRIUS TU
7. To LOCK a channel 1 Select EHTER CODE Using the UNO LRC1 or ST2 RC remote control enter the current four digit code default is 2 Exit Channel Lock mode The channel is now locked and will not appear when scrolling through channels If the channel is selected numerically from the remote control the user must enter the code to unlock access Unlock Channel UNLOCK CHAN This selection appears when a locked channel is selected To UNLOCK a channel 1 Use the remote control to access the channel From the Channel Lock menu select Enter the current four digit code default is amp amp amp amp This temporarily unlocks the channel when the channel is exited it will lock again 2 To fully unlock the channel repeat the process above in step 1 Change Code CHANGE CODE This selection allows you to enter a new four digit code for locking unlocking channels To change a code 1 Select CHAHGE CODE Press on the ST2S on the ST2 RC or on the UNO LRC1 2 Using the remote control enter the new four digit code KE EHTER appears Enter the new code again SALE appears and the 5125 returns to normal mode Front Panel Operation Turning the unit on To turn the unit on push the On Off button up on the front panel Pushing the On Off button down turns the tuner off Selecting the desired tuner From the front panel use to toggle between SIR IUS and AM FM A backlight shows behind the select
8. Within each category is a series of channels e g The Uault The Roadhouse CHH Channel selection in this mode is refined to scrolling only those channels in the selected category 17 18 5725 OPERATION SIRIUS RADIO MODES Category Search Mode 1 CAT SEARCH continued Next Category This button press accesses the next category from the current category Previous Category This button press accesses the previous category from the current category Category Channel Up This button press accesses the next channel up within the selected category Category Channel Down This button press accesses the next channel down within the selected category TSS STERC STZXP UNOS2 UNOIRCI 7 Category Search mode 9 e 90 Pew 9 o m S Ooo PD Now Playing Mode 2 PLAYHG This mode displays information about the current SIRIUS selection Appropriate button presses access the next or previous information item Displays the artist s name feature name or program name news talk sports TITLE Displays the song title or program title CATEGORY Displays the current category S88 STRSTR onos Onor Now Playing Mode 2 0 0 5725 OPERATION SIRIUS RADIO MODES Display Preference Mode 3 D5PL PREF This mode allows you to choose how SIRIUS channel information will be displayed on the keypad and tun
9. an existing ST2 by using the Link Out of the first unit into the Link In of the second unit Before using the ST2S tuner with the CAV6 6 you must assign source numbers to Tuner 1 and 2 in the ST2 Setup Menu AND complete the CAV6 6 s Source Setup procedure to identify the tuner as a Peripheral device and assign Source Numbers The CAV6 6 Rev 3 requires firmware version 2 01 16 or higher and CAV6 6 Rev 4 requires firmware version 3 01 10 or higher to control each tuner through RNET The UNO S2 keypad requires firmware version 3 01 01 or higher IR controlled System CAi Series The 5125 Tuner can be controlled by infrared commands received through either of the two IR connections on the rear panel There are two unique IR code sets for Tuner 1 and Tuner 2 which allow each to be controlled independently from either IR connection These codes can be learned from the ST2 RC remote control into the CALRC1 remote control and or the DSC and DAN IR learning keypads The 5125 contains two individual tuners which makes it act as two sources in the CAi system There are two source audio outputs and two IR connections one for each tuner in the ST2S You will need at least one IR link cable Russound P N 09 0508 for INTRODUCTION these connections one is supplied with each CAi system If you are using an IR controlled system from another manufacturer installation should be similar The ST2S IR codes may be learned into many oth
10. cT A ERE VAR HECTIC RCA Cable IR Link Cable 4 Pose n jj T 57 weg 7 zi 5125 SETUP AND CONNECTIONS CAV6 6 SERIES CONNECTIONS CAT 5 Cable FM antenna UNO S2 keypads dz iP t vl z QO J E ST2 Tuner Tuner 2 is Source 2 RCA Cables Tuner 1 is Source 1 CAT 5 Cable dlr _ _ _ BP ORT Zone Aubio To Awe amp Video OUT oc Kino frac Connections J NODO m de 9 9 6 9 TON oie nr OOO 6 0 M Ne TOVON VOTO 9 ga cone 12V MRussound e OO ANET INK m m x T ABUS READY Sub ZONES 110 250 2 240V F125AH280V E CAV6 6 RCA Cable m d Lum am jp Source Connections with CAV6 6 Controller Amplifier RNET System The diagram depicts a typical setup using the ST2S Tuner with a CAV6 6 amplifier Each tuner in the ST2 unit must be connected as a separate source for audio inputs UNO S2 keypads are connected to the CAV6 6 keypad ports NOT the ports on the ST2 Tuner NOTE When viewed from the BACK Tuner 1 output is on the RIGHT side of the ST2S and the Tuner 1 Source 1 input is on the LEFT side
11. control LCD PANEL 12 character backlit display shows station channel custom names etc SIRIUS and AM FM Backlit tuner selection indicator SELECT Selects Tuner 1 SIRIUS or Tuner 2 AM FM and accesses tuner setup menus MEM PRESET UP DOWN Selects memory presets starting with last preset and toggles through menu features MODE BAND AM FM Selects AM or FM band SIRIUS Selects a SIRIUS Mode Category Search Now Playing Display Preferences ALL Enters menu selections when programming TUNE UP DOWN AM FM Manually selects radio stations SIRIUS Manually selects channels Channel Up Channel Down ALL Toggles through menu settings BE E BHEEHBRHEEEBDE E STEREO MON EXIT SIGNAL AM FM Selects stereo mono mode for AM FM and Distant Local reception SIRIUS Press to Exit current SIRIUS Mode hold for signal strength COMPONENT GUIDE ST2S REAR PANEL Hg Bu XS ST2 Srhart Tuner NI issound nm M Coax Loop Antenna IR L WM Joo 750 GND AM Tuner 2 Tuner ANTENNA SIRIUSA 8 2 o 68 eypad 2 BEDONDELC E TUNER 2 AM FM TUNER 1 SIRIUS RNET LINK IN LINK OUT Links to other Russound components that are RNET compatible displays frequency and other information on the UNO keypads RS 232 INTERFACE The RS 232 Interface allows the tuner to be controlled by PC or other devices that have an RS 232 Interface The RS 232 I
12. liq uid enters the ST2 cabinet unplug the unit from power immediately and take the ST2 to a qualified service person for inspection 3 Location of ST2 Place the ST2 in a well ventilated location Take spe cial care to provide plenty of ventilation on all sides of the ST2 especial ly when it is placed in an audio rack If ventilation is blocked the ST2 may overheat and malfunction Do not expose the ST2 to direct sun light or heating units as the ST2 internal components temperature may rise and shorten the life of the components Avoid damp and dusty places 4 Care From time to time you should wipe off the front and side panels of the cabinet with a soft cloth Do not use rough material thinners alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering This device complies with Part 15B of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by Russound could void the user s authority to operate this equip ment TABLE OF CONTENTS Product Introductioni D 4 5 Component Guide ST2S iFront Panel o dedere dette ro use bunt Po eret 6 9725 M E 7 STZRC Remote Control
13. multi room audio distribution system SIRIUS Y SATELLITE RADIO SIRIUS brings you satellite radio the way you want to hear it SIRIUS satellite radio provides over 120 channels of unique programming all with digital quality sound Enjoy 65 channels of 100 commercialfree music with over 50 chan nels of sports news and entertainment The wide variety of SIRIUS programming choices offers something for everyone but some adult content may not be suitable for children The ST2S provides a parental lock out feature to eas ily block access to a specific SIRIUS channel SIRIUS satellite radio is a subscription based service and listeners can subscribe by visiting SIRIUS on the web www sirius com or by calling SIRIUS at 888 539 7474 In addition to the traditional AM FM broadcast tuner function and the SIRIUS satellite access the ST2S Tuner can store up to 72 favorites or memory presets These are stored in groups of six called banks There are six banks for each tuner Each preset and each bank can be given a custom name of your choice The ST2S Tuner can be controlled from the front panel or by the dedicated ST2 KP tuner keypad It can also be controlled by the ST2 RC IR remote aimed at the tuner s front panel IR receiver The ST2 RC IR codes can be learned into any IR learning remote control for easy system integra tion It can also be controlled by IR signals received through the IR connections on the rear panel from IR rep
14. strongest signal the following map is provided as a guideline for antenna place ment It may be necessary to listen to SIRIUS for a few days at different times of the day to determine the optimal antenna placement for sig nal reception AIM THE ANTENNA East B Straight Up E Northwest or West West or North North n North or East The display shows one of the following EXCELLEHT SIGHAL Signal strength good GOOD zIGHBL Signal strength marginal WERE S IGHBHL Signal strength poor HO Loss of signal Adjust the antenna until EXCELLEHT SIGH BL is displayed Press EXIT SIGNAL to exit Signal Strength Mode 13 14 5125 SETUP AND CONNECTIONS ANTENNA CONNECTIONS Grounding an Outdoor Antenna If the tuner is used with an outdoor antenna the antenna must be grounded against static charges and voltage surges Consult the instructions that came with the antenna or contact the antenna manu facturer for proper installation instructions The diagram gives a general depiction of how an outdoor antenna should be grounded For complete guidelines on antenna grounding procedures please con sult the National Electrical Code Section 810 ANSI NFPA No 70 1984 Antenna Lead In Wire Electric Service Equipment Grounding Conductors Power Service Grounding Electrode System Ze TT 5125 OPERATION SIRIUS RADIO OVERVIEW SIRIUS SATELLITE RADIO SIRIUS Radio Activation SIRIUS Radio de
15. the included FM antenna and AM loop antenna Also shown are two outdoor AM FM antenna options not included Not to scale 5125 SETUP AND CONNECTIONS SIRIUS Antenna For SIRIUS radio reception connect the included SIRIUS antenna to the back panel of the SIRIUS module The antenna comes with 20 feet of cable If this length is not sufficient there are aftermarket antenna cable extension kits avail able for custom lengths SIRIUS Antenna Installation There are several methods available for antenna placement and installation Regardless of method used it is best to experiment with positioning to achieve the best signal possible before installa tion The SIRIUS antenna may be situated in or near a window In metropolitan areas ground located SIRIUS Signal Strength Mode To test the SIRIUS signal reception turn the unit on When the SIRIUS radio is powered for the first time the SIRIUS service will start playing Preview Channel 184 a preview promotional channel Verify that Channel 184 is playing by pressing the Tune Up Tune Down buttons Enter Signal Strength Mode by pressing and holding the ST MONO button on the 5125 front panel ANTENNA CONNECTIONS repeaters are used to boost the signal which can be received by antennas placed in or near windows SIRIUS Antenna Positioning SIRIUS has three satellites over the contiguous United States plus terrestrial repeaters in major metropolitan areas To receive the
16. 2 RC remote control is the only means of remote operation of the ST2S in a non RNET system The 5125 front panel displays information for the tuner that is receiving commands from the ST2 RC However the ST2 RC commands do not change which tuner is playing that is done through the sys tem s source selection Turning the unit on off To switch the ST2 tuner in or out of standby mode push or any other button except TUNER 1 or TUNER 2 Selecting the desired tuner To control a tuner push or When pressed these buttons will be backlit green for Tuner 1 SIRIUS and amber for Tuner 2 AM FM Each time a tuner is selected the next button press will refresh the display with the current station or preset for that tuner and all subsequent button presses and memory preset entries will be associated with that selected tuner Selecting the desired band AM FM only Push Cam to switch between AM and FM reception Selecting the desired frequency or channel Use and for manual tuning To move quickly through the stations or channels press and hold either of the Tune buttons for more than 1 5 seconds To directly select a station or channel press C and enter the two or three digit SIRIUS channel num ber or the three or four digit station frequency 1071 for 107 1 etc European regions use five digit station frequencies Selecting a mode SIRIUS Push to select an SIRIUS operating mode Exiting a mode SIRIUS Push
17. 5125 Smart Tuner Installation Manual SIRIUS SATELLITE RADIO IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SER A VICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte nance servicing instructions in the literature accompanying the appliance If you have any questions please call Russound Inc at 1 800 638 8055 or 603 659 5170 Safety Instructions 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance in the operating instruc tions should be adhered to 4 Follow Instructions All operating and user instructions should be fol lowed 5 Water and Moisture The applia
18. Cio exit the SIRIUS operating mode selection menu Frequency Seek AM FM only The SEEK function is performed by pressing and releasing 3 to seek lower frequencies or 7 for higher frequencies SEEK tuning begins at the current frequency seeks upward and stops at the next tuned station Pushing continues the SEEK function Once the highest frequency is reached the tuner con tinues in SEEK mode at the lowest frequency Selecting Stereo or Mono Output AM FM only Press to toggle between stereo and mono mode STEREO or MONO appears briefly on the screen when selecting mode Normal operation is in stereo mode On a preset the stereo mono setting is saved for that preset Selecting Distant or Local Reception AM FM only Press to toggle between Distant and Local mode DISTANT or LOCAL appears briefly on the screen when selecting mode Normal operation is in Distant mode Recalling a Memory Preset To recall a memory preset select the desired tuner press and enter the desired bank number 1 6 then press Qe and enter the desired preset number 1 to 6 The memory presets can also be accessed by using and O to scroll through all presets for the selected bank Saving Favorites The remote control stores two favorites similar to memory presets per tuner These are set simply by selecting either Tuner 1 or Tuner 2 setting the desired frequency and pressing and holding or until FAV1 2 saved
19. NER SETUP Sirius Setup Menu Controller Diagnostics Factory Initialization and System Info Procedures ee TUNER SETUP Menu E SOURCE UPDATE FACTORY NUM Cer FIRMW INIT Procedure Procedure Procedure SYSTEM INFO Procedure Menu T BANK SYSTEM INFO Procedure Sirius Setup Menu Mode Band All Contrirs CONTROLLA BIAGNOSTICS FACTORY NAME NAME 6 ID Procedure INIT Procedure Procedure Procedure Procedure M e 3 de WARNING This Procedure WARNING This Procedure returns the ST2 Tuner to its Factory C settings J Are you sure Yes or No Band Please Cycle Power Wait 33 5725 TUNER PROGRAMMING 512 TUNER SETUP MENU Tuner Setup Menu for AM FM It is important to select the desired tuner Tuner 2 for AM FM using the SELECT button BEFORE accessing the Tuner Setup Menus Memory Name AM FM A memory preset must be created and saved before it can be named see page 21 Once it is saved the preset s Tuner Bank and Memory must be entered in the following procedure 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE again 3 MEMORY NAME appears on the tuner 4 Press MODE BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press MODE BAND to advance 8 Press the Tune Up Down buttons to sel
20. Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs receptacles and the point where they exit from the appliance 13 Cleaning The appliance should be cleaned only as recommended by the manufacturer 14 Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time 15 0bject and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through the openings 16 Damage Requiring Service The appliance should be serviced by quali fied service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or E The appliance has been dropped or the enclosure is damaged 17 Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel Precautions 1 Power WARNING BEFORE TURNING ON THE POWER FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY 2 Do Not Touch The ST2 With Wet Hands Do not handle the ST2 or power cord when your hands are wet or damp If water or any other
21. R DIAGNOSTICS FACTORY SYSTEM Sirius ID NAME NAME fn Procedure INIT INFO Setup Procedure Procedure Procedure Procedure Procedure Menu a Selects character position Repeat for each character in name 10 Press MODE BAND when bank name is 13 Press MODE BAND to save bank name The entered Bank Name menu returns to the Bank prompt 11 SAVE CHANGES will appear to name other banks or press SELECT to exit 12 Press Tune Up Down to select Yes or No the Bank Name menu 5725 TUNER PROGRAMMING 512 TUNER SETUP MENU Press Select button to select Sirius Tuner Sirius Setup Menu Bank Name Procedure SOURCE UPDATE FACTORY SYSTEM Chassis NUM FIRMW e INIT INFO Setup Procedure Procedure Procedure Procedure Menu MEM BANK CONTROLLR DIAGNOSTICS FACTORY SYSTEM Sirius NAME Cy NAME Cy ID er Procedure INIT e INFO Setup Procedure Procedure Procedure Procedure Procedure character Selects character position Repeat for each character in name Controller ID SIRIUS The Controller ID procedure is used to identify the controller s that the SIRIUS tuner will respond to Note For the SIRIUS module that is installed in the ST2S chassis All Controllers will be the default setting Diagnostics SIRIUS The Diagnostics procedure is for factory use only 32 CHANGES OP SAVE Mode Band YES Factory
22. ank name will show on the display an Recalling a Memory Preset To recall a memory preset press and release or scroll through the presets for the selected bank Memory presets must be stored for ST2 KP recall El ST2 KP Keypad Display The 5 character backlit display shows frequency and band plus SIRIUS channel and mode information Messages scroll twice then display the first 5 char acters ST2 KP Keypad Front Panel 23 5725 OPERATION UNO S2 KEYPAD CONTROLS WITH CAV6 6 CAV6 6 UNO S2 Keypad Operation NOTE To control the ST2 Tuner through the UNO S2 keypad the tuner must be configured as a source using the CAV6 6 programming steps Turning the unit on The tuner is power managed by the CAV6 6 or other RNET enabled controller If the tuner is in standby mode any button press of the UNO S2 keypad will bring the tuner out of standby mode Selecting the desired tuner On the UNO S2 keypad press to select either Tuner 1 SIRIUS or Tuner 2 AM FM by choosing the tuner s preassigned source num ber Selecting the desired band AM FM only Push Qe to toggle between AM band and FM band reception Selecting a Mode SIRIUS Push to toggle between SIRIUS modes Exiting a Mode SIRIUS Press and release until EXIT is displayed to exit SIRIUS mode selection menu Selecting the desired frequency or channel Use and for manual tuning or channel selection The frequency or chann
23. anual station or chan SIRIUS Signal Strength mode toggle nel selection E MUTE Mutes unmutes tuner audio output E seLect AM FM Selects AM or FM band SIRIUS Operating mode toggle BANK SELECT Used for bank selection press and hold El SEEK press KG MEM UP DOWN Scrolls through memory preset AM FM Seeks next higher tuned station stations press RES Ex cunene AIRIS mode NOTE UNO S2 keypads are connected to the CAV6 6 to control the 5125 through RNET UNO S2 keypads do not connect directly to the ST2 Tuner 25 5725 OPERATION UNO LRC1 REMOTE CONTROL WITH CAV6 6 UNO LRC1 Remote Control Operation Turning the unit on The tuner is power managed by the CAV6 6 or other RNET enabled controller If the tuner is in standby mode any button press of the UNO LRC1 will bring the tuner out of standby mode when used with the UNO keypad Selecting the desired tuner To select a tuner push and choose the source number preassigned to Tuner 1 SIRIUS or Tuner 2 AM FM or use the UNO numeric source inputs at the bottom of the UNO LRC1 Selecting the desired band AM FM only Push Q2 to toggle between AM FM reception Selecting a Mode SIRIUS Push or lt to toggle between SIR IUS operating modes Exiting a Mode SIRIUS Press Gor to exit SIRIUS operating mode menu Signal Strength mode SIRIUS Press and hold and release The display shows the signal strength rating To exit press O
24. appears on the tuner Stored Favorites are then recalled by pressing either or 9 ST2 KP Keypad Operation BH Turning the keypad on off To activate the ST2 KP press Press to power down the keypad display The keypad remains powered until the ST2S Tuner is turned off E Selecting the desired tuner To select a different tuner press and hold If the keypad has been hardware jumper selected to Tuner 1 or Tuner 2 it will not switch between the two tuners The backlight color of the display will be green for Tuner 1 SIRIUS and amber for Tuner 2 AM FM Each time a tuner is selected the display will refresh with the current station or preset for that tuner and all subsequent button presses and memo ry preset entries will be associated with that selected tuner El Selecting the desired band AM FM Push to switch between AM or FM band El Selecting a mode SIRIUS Push to select a SIRIUS operating mode B Exiting a mode SIRIUS Press and release until EXIT is displayed to exit the SIRIUS operating mode menu EH Selecting the desired frequency or channel Use and for manual tuning To move quickly through the channels press and hold either or for more than 1 5 seconds European frequen cies show in 05 MHz increments ST2S OPERATION ST2 KP KEYPAD CONTROLS an Selecting a Bank To select a bank select the desired tuner then press and hold or to select the desired bank The b
25. cter position Up to 12 characters can be entered one by one blinking cursor indicates the place ment of the character being entered 12 Press MODE BAND when memory name is entered 13 SAVE CHANGES will appear 14 Press Tune Up Down to select Yes 15 Press MODE BAND to save memory name The Memory Name menu returns to the Memory prompt to name other presets or press SELECT to return to the Memory Name menu start Bank Name SIRIUS A custom name can be assigned to each of the six banks of Tuner 1 SIRIUS 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE 3 MEMORY NAME appears Press MEM Up Down until BANK NAME appears on the tuner 4 Press MODE BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press MODE BAND BANK NAME appears again 8 Press MODE BAND to access the Bank Name entry screen 9 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 5125 TUNER PROGRAMMING ST2 TUNER SETUP MENU Press Select Sirius Setup Menu button to select SiriusTuner Memory Name Procedure TUNER SOURCE UPDATE FACTORY SYSTEM Chassis SETUP e NUM t FIRMW e INIT e INFO Setup Menu Procedure Procedure Procedure Procedure Menu A MEM BANK CONTROLL
26. d source for control of the CAV6 6 and any connected compo EB NUMERIC INPUT Number buttons for direct nents Select UNO before sending input of frequency channel preset bank UNO LRC1 remote commands E TUNE UP DOWN Incrementally scrolls through channels or tuned stations EXIT Exit SIRIUS operating mode TUNE UP DOWN Incrementally scrolls through channels or tuned stations Volo Ct SELECT AM FM Confirms numeric selection SIRIUS Operating mode toggle MENU SIRIUS operating mode toggle ray AM FM Selects AM or FM band SIRIUS Operating mode toggle BANK UP DOWN Used for bank selection press and hold MEM UP DOWN Scrolls through memory pre sets for selected bank press MUTE Mutes unmutes tuner audio output SCAN SEEK press see 14 below AM FM Scans through tuned stations with 5 second preview before next station press and hold SIRIUS Exit SIRIUS operating mode mE TUNER SELECTION Select source number for TUNER 1 SIRIUS or TUNER 2 AM FM FE INFO SIRIUS Now Playing mode toggle EZ SEEK UP DOWN AM FM Seeks next tuned station up down SIRIUS Next previous preset category info item display preference GUIDE SIRIUS Category Search mode toggle 27 28 5125 TUNER PROGRAMMING ST2 TUNER SETUP MENU ST2S Tuner Setup Menus Note The Setup Menu procedures must be performed from the ST2S Tuner
27. de Signal Strength This button press and hold accesses the Signal Strength mode Depending on the signal the follow ing will be displayed EXCELLENT SIGHAL Signal strength good GOOD SIGHAL Signal strength marginal WERE SIGHAL Signal strength poor HO SIGHAL Loss of signal Press the appropriate button again to exit Signal Strength Mode 5725 OPERATION SIRIUS RADIO MODES Preset default Mode This is the normal operating mode of the SIRIUS tuner In this mode the SIRIUS tuner operates similar ly to the AM FM tuner for channel up and down bank selection and memory presets Next Preset This button press accesses the next saved preset 6 presets for each bank in the chosen bank Previous Preset This button press accesses the previous saved preset in the chosen bank Next Bank This button press accesses the next bank total of 6 banks Previous Bank This button press accesses the previous bank Channel Up This button press accesses the next active channel up from the current channel Channel Down This button press accesses the next active channel down from the current channel STZRC STZXP UNOS2 UNOIRCI mm Rm 9 be poate fo o o ee pem 9 Oro Pra Peessek toa 9 Dp ceo DOO oO Keo Category Search Mode 1 CAT SEARCH SIRIUS Radio is organized by Channel Category e g Racks Counts Hews
28. e System Info menu shows the ST2 Tuner s manufacturing build properties 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MEM Up Down until SYSTEM INFO appears on the tuner Press MODE BAND Press MODE BAND at Build Time to view Press MEM Up Down to advance Press MODE BAND at Build Date to view Press MEM Up Down to advance Press MODE BAND at Version to view Press SELECT to exit the System Info menu 0 00 OY O1 END OF ST2 CHASSIS SETUP Tuner Setup Menu for SIRIUS It is important to select the desired tuner Tuner 1 for SIRIUS using the SELECT button BEFORE accessing the Tuner Setup Menus Memory Name SIRIUS A memory preset must be created and saved before it can be named see page 21 Once it is saved the preset s Tuner Bank and Memory must be entered in the following procedure 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE again 3 MEMORY NAME appears on the tuner 4 Press MODE BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press MODE BAND to advance Memory appears 8 Press the Tune Up Down buttons to select a Memory 9 Press MODE BAND to advance MEMORY NAME appears again 10 Press MODE BAND to access the Memory Name entry screen 11 Press Tune Up Down to select a character and MEM Up Down to change a chara
29. eating system commonly used in distributed audio systems If the 5125 Tuner is part of an RNET enabled sys tem such as the CAV6 6 S2 system the tuner can be controlled through an RNET keypad such as the UNO S2 The ST2 Tuner also has an RS 232 port to sup port fully bi directional integration into whole house control systems such as Crestron and AMX FEATURES e SIRIUS satellite radio e AM FM Tuner e Compact single rack unit chassis e Six banks of six memory presets each per tuner 72 total presets for storing AM FM station settings or SIRIUS channels Custom names for presets and banks Two Favorite presets per tuner Stereo or mono mode Local or distant mode Dedicated IR remote control Individual IR direct inputs for each tuner Front panel IR receiver Supports two ST2 KP optional tuner keypads RNET connections send tuner frequency and control information to UNO keypad display RS 232 control and programming User settings can be backed up and restored INSTALLATION APPLICATIONS RNET enabled System When the ST2S Tuner is used with an RNET enabled device such as the CAV6 6 and is con nected to it through the Link In or Link Out port the tuner will be controlled by the CAV6 6 through the UNO S2 keypad Through RNET tuner information such as Tuner 1 or 2 station frequency or channel preset names and AM FM band or SIRIUS is displayed on UNO S2 keypads An additional RNET device can be connected to
30. ect a Memory 9 Press MODE BAND to advance MEMORY NAME appears again 10 Press MODE BAND to access the Memory Name entry screen 11 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 12 Press MODE BAND when memory name is entered 13 SAVE CHANGES will appear 14 Press Tune Up Down to select Yes or No 15 Press MODE BAND to save memory name The Memory Name menu returns to the Memory prompt to name other presets or press SELECT to return to the Memory Name menu start Bank Name AM FM A custom name can be assigned to each of the six banks of Tuner 2 AM FM 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE BAND 3 MEMORY NAME appears Press MEM Up Down until BANK NAME appears on the tuner 4 Press MODE BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press MODE BAND BANK NAME appears again 8 Press MODE BAND to access the Bank Name entry screen 9 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 10 Press MODE BAND when bank name is entered 11 SAVE CHANGES will appear 12 Press Tune Up Do
31. el will appear on the keypad and the active tuner To move quickly through the channels press and hold either or for more than 1 5 seconds Frequency Seek AM FM only press on will seek the next higher tune able station If a tuneable station is not found end the SEEK function by pressing again Frequency Scan AM FM only To scan press and hold then release The tuner scans through tuned stations with a 5 sec ond preview before moving to the next station To end scanning press i again Signal Strength Mode SIRIUS To check SIRIUS signal strength press and hold then release The display shows the signal strength rating To exit press again Selecting a Bank To select a bank press and hold for bank up or 9 for bank down The bank s name will be temporarily displayed on the UNO S2 Recalling a Memory Preset Press 1 and amp to scroll through the memo ry presets for the selected bank This procedure will step through all of the presets in the current bank then loop back to start at the first one Only configured presets will be displayed Mute Press Mi to mute unmute the tuner audio output 5125 OPERATION UNO S2 KEYPAD CONTROLS WITH CAV6 6 E TUNER SELECTION Select source number SCAN press and hold l l assigned to TUNER 1 SIRIUS or TUNER 2 AM FM AM FM Scans through tuned stations with 5 5 preview before next station TUNE UP DOWN Used for m
32. er Dimensions Weight Power Supply Frequency Range FM Antenna Impedance Impedance AM Sensitivity Q S N Image Rejection S N Ratio FM Sensitivity S N Image Rejection S N Ratio SIRIUS SIRIUS Band SIRIUS Antenna 17 W x 8 D x 1 8 H 43 x 20 3 x 4 4 cm 7 Ibs 3 2kg 12VDC 1 25A AM 530 1710 kHz FM 87 7 107 9 MHz 75 ohm unbalanced 300 ohm balanced 20dB 55 dBu 33dB 45 dB 30 dB 6dB max 12 dBu 80 dB 60 dB 2320 00 2332 50 MHz 50 ohm SMB connection 37 38 WARRANTY amp REPAIR The Russound 5125 is fully guaranteed against all defects in materials and workmanship for two 2 years from the date of purchase During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor For this warranty to apply the unit must be installed and used according to its written instructions If service is necessary it must be performed by Russound The unit must be returned to Russound at the owner s expense and with prior written permission Accidental damage and shipping damage are not considered defects nor is damage resulting from abuse or from servicing by an agency or per son not specifically authorized in writing by Russound This Warranty does not cover e Damage caused by abuse accident misuse negligence or improper installation or operation Power surges and lightning strikes e Normal wear and maintenance
33. er Appropriate button presses access the next or previous preference item Note For any display configuration the artist s name and song title will scroll before the display returns to the designated display format Channel Number CH NUMBER This selection displays the channel number only e g CHEFE CH18 Channel Name CH This selection displays the channel name only e g SIEIUS Fora Heart amp Soul Channel Number and Name it CH This selection displays the channel number and name e g 33 BackSrin IZ1 ESPHeusz in _ TSS SRC S oosa UNOIRCI 7 SIRIUS ID Mode 4 SIRIUS ID This mode allows access to the SIRIUS Identification number for the SIRIUS module This 12 digit number must be provided to SIRIUS during the activation procedure Example 123456789812 e SIRIUS ID Mode ID Mode mme B s o 5 mum iS 15 99 3199 19 20 5125 OPERATION SIRIUS RADIO MODES Channel Lock Mode 5 CHRH LOCK This mode allows you to lock unlock a channel or channels to prevent audio access This parental control is set cleared with a four digit code entered using the UNO LRC1 or ST2 RC remote controls Channel to be locked unlocked must be selected before beginning this procedure TSS STERC ST2RP onos UNOIRCI 7 Channel Lock model Lock Channel LOCK CHAN This selection appears when an unlocked channel is selected
34. er manufacturers remote controls that have learning capability for unified control over the A V equipment Note Optional ST2 KP keypads can be used to provide control for the ST2S Tuner and are designed to be used with IR controlled systems RS 232 Controlled System The 5125 Tuner can be controlled using the RNET protocol provided via the RS 232 port on the rear panel It can also be controlled by any RS 232 enabled control system e g Crestron Information on RS 232 operation is avail able to dealers on the Russound web site www russound com BOX CONTENTS The ST2S Tuner comes with the parts needed to setup and operate the component These include e ST2 Tuner SIRIUS module AM FM module ST2 RC remote control e 12VDC power supply AM loop antenna 1 e FM antenna 1 e SIRIUS antenna 1 e RCA audio cable 2 e Rack mount ears Please call Russound at 800 638 8055 ext 501 for assistance if parts are missing COMPONENT GUIDE ST2S FRONT PANEL RI SIRIUSA NET ST2 SMART TUNER DROP DOWN COVER Hinged see through cover protects the selection buttons on the tuner MAIN POWER SWITCH Turns power on and off BANK SELECT BUTTON Selects bank 1 6 MEMORY SELECT BUTTONS Sets and selects memory presets 1 6 for each bank POWER ON OFF LED Indicates power on or off IR RECEIVER Receives IR signal from remote
35. front panel The 5125 Tuner Setup Menus provide setup and naming procedures for the 5125 main chassis the SIRIUS tuner module and the AM FM tuner module These procedures include source number assign ments assigning a custom name to a memory preset or a bank choosing a region for AM FM opera tion US or Euro factory initialization and system information If the 5125 is used with a non RNET system the 5125 can be connected and operated without any setup programming Follow the setup menus if custom names are desired or for system info If the ST2S is used with an RNET system such as CAV6 6 the following minimum setup must be performed for the ST2S to be properly controlled by the CAV6 6 1 ST2 Chassis Setup Menu Assign source numbers to Tuner 1 and Tuner 2 2 CAV6 6 Source Setup Menu Assign the corresponding source numbers to Tuner 1 and Tuner 2 3 CAV6 6 Source Setup Menu Assign command type PERIPHERAL to Tuner 1 and Tuner 2 NOTE Once the programming procedures are completed cycle power first to the Tuner and then to the CAV6 6 must be powered on last to establish a connection ST2 Chassis Setup Menu Source Number Chassis The Source Number procedure permits Tuner 1 SIRIUS and Tuner 2 AM FM to be assigned the proper peripheral source identities as will be assigned in the CAV6 6 Source Setup Note Each of the 5125 modules can be config ured as source number unassigned if the mod ule is used in another syste
36. he name for the source e g Tuner 1 or SIRIUS Press the Play button to enter your choice 6 COMMAND TYPE will appear Select PERIPHERAL from the list Press the Play button to enter this choice 7 SAVE CHANGES appears Select Yes and press the Play button to save changes 8 SOURCE NUM appears again Repeat steps 4 through 7 to configure the second tuner 9 Press the Setup button three times to back out of the Installation Menu Source Configuration Note When the 5125 Tuner is used with the CAV6 6 or other RNET controller it is configured as an RNET command type Peripheral and is connected via the RNET bus This makes the tuner behave as a fully integrated device with UNO S2 keypad support Each tuner must be set up with a unique source number 1 6 or unassigned An unassigned tuner is not controlled by the RNET bus Each of the 5125 modules can be configured as source number unassigned if the module is used in another system e g home theater or will not be used as a source in the RNET system Key Function Note When using the tuner with the CAV6 6 S2 system do not reassign keypad and remote buttons for tuner control in the CAV6 6 Key Configuration Menu When the tuner is assigned the Peripheral com mand type in the CAV6 6 Setup Menu key assignments and functions are automatically assigned and will operate as shown in the preceding UNO S2 keypad and UNO LRC1 remote diagrams TECHNICAL SPECIFICATIONS ST2S Smart Tun
37. holds six presets for a total of 36 pos sible presets for each tuner 72 total presets Presets are associated with the tuner that is selected at the time the preset is saved Memory Preset programming From the front panel perform these steps 1 Select a tuner using 2 Use to choose from one of six banks 1 6 2 3 If AM FM select the desired band using DI 4 Tune to the desired station or channel 5 Push the desired memory preset M1 through M6 button for more than 2 seconds When the memory preset is saved the appropriate preset number M1 through M6 and SAVED appears on the LCD The selected station setting reappears and the sound resumes after the button is released Recalling a Memory Preset To recall a memory preset use to select the desired bank then press the desired preset button M1 to M6 In addition to direct selection the memo ry presets can be accessed by using and to scroll through all presets for the bank selected Backup and Restore Once all of the tuner settings are completed it may be advisable to create a backup of the programmed settings for future use The backup will then be avail able in case tuner settings need to be restored The RNET Backup Utility is available through the Document Center at www russound com Also required are a DB9 male to female cable and laptop or desktop PC 21 5725 OPERATION ST2 RC CONTROL ST2 RC Remote Control Operation The ST
38. ill broadcast operating condition messages when the following conditions occur Display Condition ANTEHHA ERROR Antenna not connected ACQUIRIMHG SIGHAL Loss of signal acquiring channel audio IHURLID CHAHHEL Channel number not valid LIPDHTIHG CHRHHHELS CALL Channel map update IS TO SUBSCRIBE Unsubscribed channel SUBSCRIPTION UPDATED Subscription update 15 16 5725 OPERATION SIRIUS RADIO MODES SIRIUS Radio Modes There are six user modes for selecting music viewing music information retrieving ID and locking channels on the SIRIUS Tuner Preset default or normal Category Search Now Playing Display Preferences SIRIUS ID Channel Lock These modes are accessed through certain button and key presses from the tuner panel remote controls and keypads When choosing modes if no choice is made after 20 seconds the tuner will time out by showing EXIT and return to tuner display and Preset mode For all SIRIUS Modes The chart below outlines the button presses for various SIRIUS tuner functions outside of the SIRIUS modes re e mes peer All All User Modes Modes lt bo Ses E 5 oo eo _ ame jeux Or Er Operating Mode Toggle This button press accesses the five non default SIRIUS modes The five modes will appear in order Category Search Now Playing Display Preferences SIRIUS ID and Channel Lock Exit Current Mode This button press returns the SIRIUS tuner to Preset default mo
39. ks 1 6 E LOCAL DISTANCE AM FM Optimizes station reception OK AM FM Confirms direct entries SIRIUS Operating mode toggle EFI STEREO MONO AM FM Selects stereo or mono broadcast SIRIUS Exit current SIRIUS operating mode EE TUNE UP DOWN Scrolls through station or channel numbers mE MEM UP DOWN Scrolls through preset sta tions within selected bank EI AM FM Selects AM or FM band EE MEM SELECT Used for direct memory select numeric input 1 6 5125 SETUP AND CONNECTIONS Power To power the tuner connect the 12VDC external power supply by inserting the power supply jack into the power supply connection on the tuner s rear panel Audio Output Connect one end of a dual RCA audio cable to the Tuner 1 Audio Output connection Keep prop er channel identity Attach the other end of the RCA cables to the source input of the audio con trol system Repeat the same procedure for the Tuner 2 Audio Output RNET Connection To link the ST2S to an RNET compatible device use a CAT 5 passthrough patch cable with simi lar wiring terminations at each end Connect one end of the cable to the RNET Link In of the ST2 tuner and connect the other end of the patch cable to the RNET Link Out connection on the RNET compatible device IR Connections The 5125 Tuner can be controlled by infrared commands received through the two IR connec tions on the rear panel The ST2S Tuner compo nent contains two tuners
40. livers over 120 channels of digital entertainment 65 channels with 100 commer cial free music and 55 channels of news sports and entertainment SIRIUS radio is a subscription based service with a monthly provider fee and an activation charge Billing and activation are done directly through SIRIUS SIRIUS radio broadcasts Channel 184 for preview but will not broadcast the full range of channels without activation To activate the SIRIUS tuner 1 Bom Turn on the power select the SIRIUS Tuner and press to enter the SIRIUS Mode selection Scroll through the Modes until 4 5 ID appears Release the button and the 12 digit SIRIUS ID number appears on the display e g 123456783612 Write the number down to have it available when contacting SIRIUS Radio for activation The number is also shown on the back of the unit and on the product box Install the SIRIUS antenna and direct it skyward using the location chart on page 13 Tune the SIRIUS radio to channel 184 the Preview channel To subscribe have a major credit card and your SIRIUS Radio ID number at hand and contact SIRIUS at www sirius com You can also activate service by calling SIRIUS Radio at 1 888 539 7474 You will be guided through the activation process step by step A complete and up to date full channel listing is available on the SIRIUS Radio website WWW Sirius com SIRIUS Radio Displays In addition to Channel and Category information the SIRIUS tuner w
41. m e g home the ater or will not be used as a source in the RNET system 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MEM Up Down until SOURCE NUM appears on the tuner 3 Press MODE BAND TUNER appears 4 Press the Tune Up Down buttons to select the Tuner Tuner 1 is SIRIUS Tuner 2 is AM FM 5 Press MODE BAND SOURCE NUM appears 6 Press the Tune Up Down buttons to scroll through the source numbers 1 6 7 Press MODE BAND to select the source num ber as assigned in the CAV6 6 setup process 8 Repeat the process for the next tuner 9 Press SELECT to exit the Source Number menu Update Firmware Chassis The Update Firmware procedure allows the ST2 tuner s OS firmware to be updated The proce dure is performed using a DB9 serial cable with one end connected to the RS 232 port on the back of the tuner and the other connected to a PC or laptop If an OS firmware update is avail able it can be obtained through the Document Center at www russound com SIRIUS tuner mod ule firmware must be performed by an author ized Russound service facility Press and Hold Select button ST2S TUNER PROGRAMMING ST2 TUNER SETUP MENU ST2 Chassis Setup Procedures Chassis Setup Menu SYSTEM INFO Procedure Cycle Power 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MEM U
42. nc reserves the right to revise system specifications without notice 5 39 RIRussound 5125 Smart Tuner Installation Manual SATELLITE RADIO Russound 5 Forbes Road Newmarket NH 03857 tel 603 659 5170 fax 603 659 5388 e mail tech russound com www russound com 2005 Russound All rights reserved All trademarks are property of their respective owners 2005 SIRIUS Satellite Radio Inc SIRIUS and the SIRIUS dog logo are registered trademarks of SIRIUS Satellite Radio Inc 28 1190 07 26 05
43. nce should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool 6 Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination e should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance A AMI inv c and cart combination to overturn 7 Wall or Ceiling Mounting The appliance should be mounted to wall or ceiling only as recommended by the manufacturer 8 Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installa tion such as a bookcase or cabinet that may impede the flow of air through the ventilation openings 9 Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 10 Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 11 Grounding or Polarization Precaution should be taken so that the grounding or polarization means of an appliance is not defeated 12 Power Cord
44. nterface also allows for firmware updates and program ming DB9 Cable KEYPAD PORTS RJ 45 Keypad ports for ST2 KP tuner keypads in dedicated non RNET sys tems Do not connect UNO keypads to these ports FM COAX FM Antenna threaded F connection 75 ohms for Tuner 2 LOOP ANTENNA AM antenna connection 300 ohms for Tuner 2 IR INPUT IR control input common IR control for Tuner 2 or Tuner 1 AUDIO OUTPUT Line level audio signal outputs RCA Cable for Tuner 2 SIRIUS ANTENNA SIRIUS Antenna SMB connection 50 ohms for Tuner 1 IR INPUT IR control input common IR control for Tuner 1 or Tuner 2 AUDIO OUTPUT Line level audio signal outputs RCA Cable for Tuner 1 POWER SUPPLY 12VDC 1 25A max current draw external power supply connection COMPONENT GUIDE ST2 RC REMOTE CONTROL E POWER Puts the tuner in out of standby mode Ell TUNER CONTROL Select TUNER 1 SIRIUS or TUNER 2 AM FM and all subsequent button presses affect that tuner NUMERIC INPUT Number buttons for direct selection of station channel bank preset BANK SELECT Used for direct bank selection numeric input 1 6 TUNE SELECT Used for direct station or chan nel selection numeric input TUNE UP DOWN Incrementally Scrolls through station or channel numbers FAV 1 FAV 2 Sets Selects Favorite 1 or 2 preset selection on ST2S tuner SEEK UP DOWN AM FM Seeks the next tuned station up down SIRIUS Scrolls through ban
45. of the source input section of the CAV6 6 11 12 5125 SETUP AND CONNECTIONS ANTENNA CONNECTIONS AM Antenna Connect the included loop antenna for AM recep tion to the back panel attaching the GND ground and AM ends to the appropriate con nections for Tuner 2 It is recommended to use an external outdoor or attic mounted long wire antenna for best per formance for AM reception Use a 75 ohm to 300 ohm balun at the AM connection on the tuner and attach the 75 ohm coax cable to the balun FM Antenna Attach the included FM antenna to the Tuner 2 FM COAX connection on the back panel by push ing the F type quick connect termination of the antenna onto the FM connection It is recommended to use an external outdoor or attic mounted long wire antenna for best per formance for FM reception Attach the desired length of 75 ohm coax cable directly to the FM connection on the tuner Long wire antenna Outdoor antenna 75 ohm coax m c c g x c E m ia o s Sirius antenna i 75ohm u E to 300 ohm 8 8 O balun Sere ner Russound n 9 00 MM A E ir IR en ale sla IR E N T J L J Tu ST2 Tuner ee 6 Alternate AM FM antennas Connecting an Indoor or Outdoor AM FM Antenna The diagram above depicts a typical setup using the ST2S Tuner with
46. p Down until UPDATE FIRMW appears on the tuner 3 Press MODE BAND to enter the UPDATE FIRMW menu 4 Hold BAND appears on the tuner 5 While pressing and holding MODE BAND After update cycle power appears on the tuner display 6 When Start Update appears on the tuner dis play start the update program Finished appears on the computer screen when complete 7 Cycle power to the tuner Factory Initialization Chassis The Factory Initialization procedure allows the erasure of all programmed settings and returns UPDATE FACTORY FIRMW m INIT Procedure Procedure lode WARNING This Procedure returns the ST2 Tuner to its Factory settings BUILD k TIME Band Cycle Power them to the factory default settings 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MEM Up Down until FACTORY INIT appears on the tuner 3 Press MODE BAND to enter the FACTORY INIT menu 4 Are you sure appears on the tuner Using the Tune Up Down buttons view the Yes and No selections 5 Press MODE BAND to select A No selection returns to the top of the Factory Init menu A Yes begins the initialization 6 Please wait appears on the tuner during the process and Cycle Power appears when com plete 7 Cycle power on the 5125 tuner 29 5125 TUNER PROGRAMMING ST2 TUNER SETUP MENU System Info Chassis Th
47. provided to secure the rack ears onto the unit on both sides The 5125 tuner should not be installed above a high heat pro ducing component such as a power amplifier 5725 SETUP AND CONNECTIONS ST2 KP AND CAi CONNECTIONS RJ 45 CAT 5 Wiring Scheme Connection shown flat side on to ST2 Tuner Back Panel push clip on the bottom 12345678 TINI VY ST2 Smart Tuner Designed in USA Made in China Newmarket NH USA GREENWHITE ST2 KP Connections to 5125 Tuner Non RNET Systems The diagram depicts a standard ST2 KP keypad connection to the keypad port on the back of the 5125 The keypad uses a 110 punchdown connection and an RJ 45 T568A connection to the tuner ST2 KP CA LCD2 CAT 5 Cable ST2 KP Back O 9 RNET Link SIRIUS o 8 8 RCA Cable ZONE PREAMP OUTPUTS V ec s 8 2202404 AC L MDVAC Source Connections with CAi Series Controller Amplifier The diagram depicts a typical setup using the ST2S Tuner with a CAi Series amplifier Each tuner in the ST2 unit must be connected as a separate source for audio inputs 10 iio
48. ssis Setup Menu NEA E MEM NAME REGION Procedure Procedure Selects character position Repeat for each character M Bi and SAVE CHANGES BANK NAME Selects character position Repeat for each character in name 35 36 5725 TUNER PROGRAMMING PROGRAMMING FOR CAV6 6 USE NOTE The CAV6 6 Rev 3 must have firmware version 2 01 16 or higher CAV6 6 Rev 4 must have firmware version 3 01 10 or higher and UNO S2 firmware must be version 3 01 01 or higher to control the ST2S Tuner Use the System Info Menu of the CAV6 6 to check the firmware version If the firmware is not the proper revision as noted here visit the Document Center at www russound com to obtain the latest version To Program the CAV6 6 to operate with the ST2S Tuner refer to the CAV6 6 Instruction Manual for details 1 Enter the Setup Menu by pressing the Setup button on the side of the UNO S2 keypad 2 SOURCE SETUP will appear Enter the Source Setup Menu by pressing the Play button on the UNO S2 keypad 3 BASIC SETUP will appear Enter the Basic Setup Menu by pressing the Play button again 4 SOURCE NUM will appear Use and buttons to select the source number to which Tuner 1 SIR IUS is connected Press the Play button to enter your choice 5 SOURCE NAME will appear Use and buttons to select t
49. wn to select Yes or No 13 Press MODE BAND to save bank name The Bank Name menu returns to the Bank prompt to name other banks or press SELECT to exit the Bank Name menu Region AM FM The Region procedure assigns either US or Euro to the tuner The difference between the two is that US FM frequencies operate in 2 MHz incre ments while European FM frequencies operate in 05 MHz increments 1 Enter the Setup Menu by pressing and holding the SELECT button 2 TUNER SETUP appears Press MODE BAND 3 MEMORY NAME appears Press MEM Up Down until REGION appears on the tuner 4 Press MODE BAND 5 Press the Tune Up Down buttons to select either US or EURO 6 Press MODE BAND to select Press SELECT to exit the REGION menu END OF AM FM TUNER SETUP Press Select button to select AM FM Tuner DE 5125 TUNER PROGRAMMING ST2 TUNER SETUP MENU Backup and Restore Once all of the tuner settings are completed it may be advisable to create a backup of the pro grammed settings for future use The backup will then be available in case tuner settings need to be restored The backup and restore PC application RNET Backup is available through the Document Center at www russound com Also required are a DB9 male to female cable and laptop or desk top PC AM FM Setup Menu TUNER SOURCE UPDATE FACTORY SYSTEM SETUP NUM c FIRMW INIT fem INFO Menu Procedure Procedure Procedure Procedure Cha
50. y Selecting the desired frequency or channel Use the Channel and iJ lt 2 and SA for manual tuning To move quickly through the channels press and hold the button for more than 1 5 seconds To directly select a station or channel enter the three or four digit channel or frequency Frequency Seek AM FM only The SEEK function is performed by pressing and releasing the Select lt or Ls or 2 To seek higher frequency station press lox Press lt l for lower frequencies Tuning begins at the current fre quency seeks upward or downward and stops at the next tuned station Pushing gt or again con tinues the SEEK function Once the highest frequency is reached the tuner continues SEEK mode at the lowest frequency Frequency Scan AM FM only To scan press and hold then release The tuner scans through tuned stations with a 5 second preview before moving to the next station To end scanning press Cll again Selecting a Bank To select a bank press and hold for bank up or c for bank down Recalling a Memory Preset Press C and or lt and gt to scroll through a loop of all the memory presets for the cur rently selected bank Only configured presets will be displayed Mute Press the button to mute unmute the tuner audio output 5725 OPERATION UNO LRC1 CONTROL WITH CAV6 6 UNO SELECTION UNO must be the H POWER Power managed by CAV6 6 selecte
Download Pdf Manuals
Related Search