Home

Operations Guide: CEN-TRACK

1. Tuner cards and Browse Context modules must also be added e Tuner Cards Drag the control cards for the installed tuner s from the Plug in Control Cards Cards CEN TRACK folder of the Device Library and drop it or them on the CEN TRACK e Browse Context Modules Drag one or more CEN TRACK Browse Contexts from the Ethernet Control Modules Ethernet Audio Modules folder of the Device Library and drop it or them on the CEN TRACK NOTE The Browse Contexts are designed to communicate with a single user interface either a touch screen or an APAD If necessary add a Browse Context for each interface Use CEN TRACK GUI Browse Context s for touch screens Use CEN TRACK Simple Browse Context s for the APAD 14 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner The system tree of the control system displays the device in the appropriate slot with a default IP ID as shown in the following illustration C2ENet 2 Device Slot 8 4 PROZ amp Slot 1 Empty C2Y Card Slot amp Slot 2 Empty C2Y Card Slot amp Slot 3 Empty C2Y Card Slot BE slot 4 C21 CoM6 Bi Slot 5 C2I IR8 lE slot 6 C21 108 Slot 7 C2I RY8 lE Slot 8 C2ENET 2 x IP ID 03 CEN TRACK BB 4B Slot 1 CEN TRACK AMFM2 WE Slot 1 CEN TRACK FM WE Slot 2 CEN TRACK FMRDS WE Slot 3 CEN TRACK AM WE Slot 4 C
2. Incorrect login information entered Correctly enter username and password case sensitive on CEN TRACK front panel Scan does not Signal strength too weak Check antenna placement and operate orientation for good signal strength Loss of Improper grounding Check that all ground functionality due to electrostatic discharge connections have been made properly 52 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron Web site www crestron com manuals List of Related Reference Documents DOCUMENT TITLE ATC AUDIONET Crestron e Control Reference Guide Notes on Internet Radio e Internet radio stations can only support a limited number of listeners at any time If the station s servers have reached their limit of listeners the ATC AUDIONET is not able to connect To resolve the problem try to connect again e Some radio station servers that have too much traffic may choose to bump people off the stream If this happens try to connect to the station again e Ifa station stops broadcasting it is removed from the list of available stations e A station may go offline before it has been removed from the list Offline stations do not produce a signal e Some stations m
3. 2 Turn the TUNE knob to highlight the desired station NOTE Press the DISPLAY button to view any additional information regarding a station in the list 3 Press ENTER to select the station 44 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner View Channel Information To view additional information about a station 1 While viewing a list of stations turn the TUNE knob to highlight a station in a station list Press the DISPLAY button to view any additional information regarding a station Presets Screen Shown with Additional Station Information Presets 1 Wash Post com 130 2 3 Clear Save View Information and Setup To view information about the signal strength access information about the tuner and determine which channels are visible in the channel lineup press the button labeled Tech The signal strength and radio ID are displayed Technical Information Screen Repeater Signal Satellite Signal CAXMKOCQ XM 3 About Setup e About the Tuner To view information about the tuner 1 Press the button labeled About About Screen About STATE1 QOS 1XX00000 XM 3 2 Press the buttons labeled lt and gt to view additional information 3 Press MENU to return t
4. Presets 1 POTUS 08 130 2 Preset 2 0 3 Preset 3 0 Clear Save 2 Turn the TUNE knob to highlight the preset station to be recalled 3 Press ENTER View Categories To view stations by category 1 Press the button labeled Cat The display shows a list of categories Categories Menu Categories Pop Rock Electronic Dance 2 Turn the TUNE knob to highlight the desired category 3 Press ENTER to select the highlighted category Pop Channels Screen Pop Channels 1 Sirius Hits 1 2 StarLite 3 Sirius Love Back 4 Turn the TUNE knob to highlight the desired station NOTE Press the DISPLAY button to view any additional information regarding a station in the list 5 Press ENTER to select the station 38 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner View Channels To view stations by channel 1 Press the button labeled Chan The display shows a list of channels Channels Screen Channels 77 Broadway s Best 80 Symphony Hall 85 Met Opera Radio 2 Turn the TUNE knob to highlight the desired station NOTE Press the DISPLAY button to view any additional information regarding a station in the list 3 Press ENTER to select the station View Channel Information To view additional information artist or song title about a station 1
5. 1 Press the button labeled Browse 2 Turn the TUNE knob to highlight Librivox Audiobooks and press ENTER 3 Turn the TUNE knob to highlight the desired file and press ENTER Favorites Internet Radio amp SiriusXM Only While listening to Internet radio or SiriusXM favorite stations can be recalled cleared and stored Recall or Clear Favorite Stations To recall or clear a favorite station 1 Press the button labeled Favs A list of favorite categories is displayed Favorites Menu Favorites Classical Rock Browse 2 Turn the TUNE knob to highlight a favorite category and press ENTER A list of stations within the category is displayed Classical Favorite Stations Screen Classical Barock Music BBC Radio 3 90 FM Amadeus 103 7 Back Browse Clear 3 Turn the TUNE knob to highlight the station to be tuned and press ENTER e Press the button labeled Back to return to the previous screen e Press the button labeled Browse to browse stations e Press the button labeled Clear to remove the highlighted station from the list of favorites 50 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Add a Favorite Station To add a favorite station 1 Tune an Internet radio station or SIRIUS station as described in Browse on page 47 The station information is displayed Internet Radio Tuner Menu
6. TunerRack Modular Multi Tuner Crestron CEN TRACK Log Out from Pandora To use a different Pandora account the current user account must be logged out To log out the current Pandora user account l o t Bow Select the ATC AUDIONET as the source to control Press MENU Press the button labeled Setup Turn the TUNE knob to highlight Setup Pandora and press ENTER Press ENTER To cancel press the button labeled Back To confirm turn the TUNE knob to highlight Yes and press ENTER To cancel turn the TUNE knob to highlight No and press ENTER Other Services Functions The Internet tuner s Setup menu is used to setup SiriusXM Internet Radio and select which Internet radio services are displayed to the user To use the Setup menu for configuration l Press the TUNERS button for an installed Internet radio tuner If the tuner is already in use options are displayed in the following menu Internet Radio Tuner Menu Classical Barock Music Belgium Internet Radio MP3 128K Add Favs Browse Setup Otherwise the Favorites menu is displayed Favorites Menu Favorites Classical Rock Browse If the tuner is already in use press the button labeled Setup If the Favorites menu is displayed press the button labeled Browse then press the button labeled Setup The Setup menu is displayed Setup Menu Setup Setup Sirius Enable Disable Provid
7. 10 100 Mbps auto switching auto negotiating auto discovery full half duplex DHCP USB device port for computer console 2 Amps 24 Volts DC 100 250 Volts AC 50 60 Hz power pack included Version 3 155 1240 or later 41 to 104 F 5 to 40 C 10 to 90 RH non condensing 110 BTU Hr Metal black finish convection cooled vented top and sides Extruded aluminum black finish with polycarbonate label overlay Freestanding or 2U 19 inch rack mountable adhesive feet and rack ears included 3 56 in 91 mm with feet 3 47 in 88 mm without feet 17 03 in 433 mm without ears 19 00 in 483 mm with ears 10 30 in 262 mm 6 8 Ibs 3 1 kg including one tuner card Continued on following page TunerRack Modular Multi Tuner CEN TRACK e 3 Crestron CEN TRACK TunerRack Modular Multi Tuner CEN TRACK Specifications Continued SPECIFICATION DETAILS Available Models CEN TRACK AMFM2 CEN TRACK AMFMXMD CEN TRACK AUDIONET Included Accessories ATC AMFM2 ATC AMFMXMD ATC AUDIONET Power Pack Available Accessories ATC AMFM2 ATC AMFMXMD ATC AUDIONET C2N TXM C50 CBL Series SRD Series TunerRack Modular Multi Tuner with Dual AM FM Tuner Card TunerRack Modular Multi Tuner with AM FM amp XM Satellite Radio Tuner Card TunerRack Modular Multi Tuner with Internet Radio Tuner Card Dual AM FM Radio Tuner Card Included quantity for CEN TRACK AMFM2 1 AM FM an
8. Browse Otherwise the Favorites menu is displayed 46 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Favorites Menu Favorites Classical Rock Browse Continue reading below for instructions on browsing Internet radio Pandora Internet Radio SiriusXM Internet Radio and audiobooks from Librivox For information on favorites refer to Favorites Internet Radio amp SiriusXM Only which starts on page 50 Browse Browse Internet radio stations Pandora Internet Radio SirtusXM Internet Radio and Librivox audiobooks Internet Radio The nternet Radio option allows the user to search for Internet radio stations and podcasts or browse Internet radio stations 1 Press the button labeled Browse 2 Turn the TUNE knob to highlight nternet Radio and press ENTER 3 Turn the TUNE knob to highlight a browsing method and press ENTER e Select Search Stations or Search Podcasts to search for Internet radio stations or podcasts by name Enter search string Screen Enter search string Back Delete a Turnthe TUNE knob to display the first letter of the search string and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back b Repeat step 1 for each letter in the search string and press ENTER c Press the button labeled
9. Classical Barock Music Belgium Internet Radio MP3 128K Add Favs Browse Setup 2 Press the button labeled Add 3 Turnthe TUNE knob to highlight the group where the favorite station 1s to be stored or highlight Add New Group to create a new favorite group Enter new group name Screen Enter new group name Back Delete a Turn the TUNE knob to display the first letter of the group name and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back b Repeat step a for each letter in the username and press ENTER c Press the button labeled Submit to enter the group name and save the station skip step 4 4 Press ENTER to save the favorite station NOTE Favorite stations can also be saved online at radio crestron com For more information refer to the latest versions of the ATC AUDIONET Operations amp Installation Guide Doc 6933 or the ATC AUDIONET Quickstart guide Doc 6931 Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 51 Problem Solving TunerRack Modular Multi Tuner Troubleshooting The following table provides corrective action for possible trouble situations If further assistance is required please contact a Crestron customer service representative CEN TRACK Troubleshooting Crestron CEN TRACK TROUBLE POSSIBLE CAUSE S CORRECTIVE ACTION Device d
10. Delete To return to the previous screen press the button labeled Back Repeat step 2 for each letter in the account s email address and press ENTER Press the button labeled Submit to continue The Enter password screen is displayed Enter password Screen Enter password Back Delete Turn the TUNE knob to display the first letter of the account s password and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back NOTE The password is case sensitive Repeat step 5 for each letter in the account s password and press ENTER Press the button labeled Submit to continue A list of Pandora stations is displayed Create a New Pandora Account To create a new Pandora account 1 Operations Guide DOC 6646C Turn the TUNE knob to highlight J am new to Pandora and press ENTER The display shows an activation code and a Web site address From a computer open a Web browser and go to the Web site www pandora com crestron Enter the activation code and follow the instructions for creating a new account On the CEN TRACK turn the TUNE knob clockwise to select the last line of the displayed message and press ENTER The Pandora Setup menu is displayed Log in to the Pandora service as described in Use an Existing Pandora Account which starts on page 28 TunerRack Modular Multi Tuner CEN TRACK e 29
11. SLOT 2 OUTPUTS LOT 3 OUTPUTS OH amp f dj G AZ Yo H E X ass ERR REAR RIE my j S Enn JHD S Au N BOE c Him RE DO MOT INSERT QA RENO MTER 1S o GRESTRON FLA m E TETEK NJ MT USA LAN 10 100 BASE T Ethernet to LAN SPDIF 1 6 To Digital to Analog Converter Inputs Ground AUDIO 1 6 RCA AUDIO 1 6 TERMINAL COMEDIES To Unbalanced Stereo To Balanced Unbalanced To PC Line Level Inputs Stereo Line Level Inputs 24 VDC 2 0 A From Power Pack NOTE Ensure the unit is properly grounded by connecting the chassis ground lug to an earth ground building steel NOTE To prevent overheating do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 11 TunerRack Modular Multi Tuner Crestron CEN TRACK Six balanced unbalanced audio outputs are provided utilizing five pin terminal block connectors For connection details refer to the following table and diagrams Audio Connections SIGNAL BALANCED AUDIO UNBALANCED NAME OUTPUT AUDIO OUTPUT L L Out L Open Shield ground Common ground R R Out R Open Typical Balanced Unbalanced Outputs Balanced Unbalanced Output L R Output L R G Gt
12. While viewing a list of stations turn the TUNE knob to highlight a station in a station list 2 Press the DISPLAY button to view any additional information regarding a station Presets Screen Shown with Additional Station Information Presets 1 Cannonball Adderley 72 2 Preset 2 0 3 Preset 3 0 Clear Save View Information and Setup To view the signal strength information about the tuner setup channels or change the Personal Identification Number PIN press the button labeled Tech The signal strength and radio ID are displayed Technical Information Screen Terrestrial Signal Satellite Signal mmmmm 31 Radio ID 018861600810 Sirius 2 About Setup Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 39 TunerRack Modular Multi Tuner Crestron CEN TRACK e About the Tuner To view information about the tuner 1 Press the button labeled About About Screen About ATC AMFMSR v 1 00 30 Sirius 2 2 Press the buttons labeled lt and gt to view additional information 3 Press MENU to return to the previous screen e Lock and Hide Unhide Channels Channels can be locked hidden and unhidden from the channel lineup NOTE When a channel is locked it can be tuned by entering a PIN with the front panel controls When a channel is hidden it cannot be tuned To lock unlock hide or unhide channels from the cha
13. as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by 56 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner modifying or distr
14. menu press MENU 4 Turn the TUNE knob to scroll through one of the built in names and press ENTER To create a custom name turn the TUNE knob to highlight Custom Name and press ENTER Enter Source 1 Name Screen Select Source 1 Name 1 Internet Radiol 2 Card not present 3 AMFM2 Del lt gt Done To enter a custom name a Select letters upper and lower case numbers or other characters by turning the TUNE knob until the desired letter number or other character is displayed on the LCD Move the cursor to another position by pressing the buttons labeled lt and gt To delete a character press the button labeled Del NOTE The maximum length for any source name is 16 characters b After entering the new source name press the button labeled Done to save the name and return to the list of sources 5 Rename other sources if desired If all of the sources have been named renamed press MENU to return to the Installer Tools menu Operations Guide DOC 6646C Crestron CEN TRACK Operations Guide DOC 6646C TunerRack Modular Multi Tuner Set Headphone Volume The Set Headphone Volume tool is used to adjust the volume level at the headphone jack 1 Open the Installer Tools menu as described on page 19 2 Turn the TUNE knob to highlight Set Headphone Volume and press ENTER Set Headphone Volume Screen Set Headphone Volume 86 Down Up 3 To lower the
15. CEN TRACK e 35 TunerRack Modular Multi Tuner Crestron CEN TRACK Are you sure you want to clear this preset Screen Are you sure you want to clear this preset OK Cancel 4 Press the button labeled OK to clear the preset or press the button labeled Cancel to cancel Recall Presets To recall a preset 1 Press the button labeled Preset The Presets screen is displayed The following illustration shows FM presets FM Presets Screen FM Presets 1 88 30 2 89 90 3 99 50 Band Clear Save 2 To change bands press the button labeled Band 3 Turn the TUNE knob to highlight the preset station to be recalled 4 Press ENTER View Signal Strength Press the button labeled Tech to view the signal strength ATC AMFMSRD and ATC AMFM 2 only FM Signal Strength Screen FM Signal Strength 98 AMFM1 Stereo Mono NOTE Signal strength information is not available on the ATC AMFMXMD Control the SIRIUS Tuner The SIRIUS tuner controls allow the user to tune stations and store and recall presets It also provides options to apply a parental lock to selected stations or hide selected stations from the channel list To select a SIRIUS tuner press the TUNERS button for an installed SIRIUS tuner Store and Clear Presets To store a station as a preset 1 Turn the TUNE knob to select the desired station 2 Press the button labeled Preset The Presets screen is di
16. CEN TRACK s configuration press the MENU button Select Tuner Format Select the tuning format to specify the tuning method used by an installed AM FM tuner When using the North American tuner format the device tunes FM frequencies in 100 kHz steps and AM frequencies in 10 kHz steps When using the European tuner format the device tunes FM frequencies in 50 kHz steps and AM frequencies in 9 kHz steps 1 Open the Installer Tools menu as described on page 19 2 Turn the TUNE knob to highlight Select Tuner Format and press ENTER Select Tuner Format Screen Select Tuner Format North American European 3 Turn the TUNE knob to highlight a tuner format To cancel and return to the Installer Tools menu press MENU 4 To confirm press ENTER and return to the Installer Tools menu 20 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Configure Front Panel The Configure Front Panel screen is used to lock or unlock the front panel controls 1 Open the Installer Tools menu as described on page 19 2 Turn the TUNE knob to highlight Configure Front Panel and press ENTER Configure Front Panel Screen Configure Front Panel Unlock Lock 3 Turn the TUNE knob to highlight the desired setting To cancel and return to the Installer Tools menu press MENU 4 To confirm press ENTER
17. FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 57 TunerRack Modular Multi Tuner Crestron CEN TRACK This page is intentionally left blank 58 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner This page is intentionally left blank Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 59 X CRESTRON Crestron Electronics Inc Operations Guide DOC 6646C 15 Volvo Drive Rockleigh NJ 07647 2019916 Tel 888 CRESTRON 07 12 Fax 201 767 7576 Specifications subject to www crestron com change without
18. Submit to begin the search A list of stations podcasts matching the search string 1s displayed d Turnthe TUNE knob to highlight the desired station podcast and press ENTER to select e Highlight Local Stations and press ENTER to display stations near the user s geographic location e Highlight Recently Played and press ENTER to display stations that were recently played Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 47 TunerRack Modular Multi Tuner Crestron CEN TRACK e Highlight Location and press ENTER to display stations or podcasts near a specific location e Highlight Genre and press ENTER to display stations or podcasts within a specific genre e Highlight Newly Added and press ENTER to display stations that were recently added e Highlight Popular and press ENTER to display the most popular Internet radio statons While listening to an Internet radio station the user can add it to a group of favorite stations view the list of favorite stations browse for another station or configure the ATC AUDIONET e Press the button labeled Add to add the current Internet radio station to the list of favorites not used for Sirius Librivox or Pandora e Press the button labeled Favs to display the list of favorite stations e Press the button labeled Browse to browse through the available stations and other Internet radio feeds e Press the button labeled Setup to configure the ATC AU
19. can be saved as presets for quick and easy recall 1 XM Satellite Radio and SiriusXM Internet Radio each require a paid subscription Contact Sirius XM Radio Inc for details 2 The number of outputs and digital output capability are dependent upon the tuner cards installed Consult the specifications for each tuner card model for complete details 2 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK Operations Guide DOC 6646C Ethernet Control TunerRack Modular Multi Tuner The CEN TRACK communicates with a Creston control system via high speed Ethernet ensuring full bandwidth to support multiple users and touch screens The control system s clock may also be synchronized to any digital radio tuner card that provides a time signal Full setup and diagnostics may be performed from the front panel or Crestron Toolbox software Additionally the antenna signal strength and subscription activation codes can also be displayed on a touch screen for easy troubleshooting Specifications Specifications for the CEN TRACK are listed in the following table CEN TRACK Specifications SPECIFICATION DETAILS Communications Ethernet USB Power Requirements Power Pack Minimum 2 Series Control System Update File Environmental Temperature Humidity Heat Dissipation Enclosure Chassis Faceplate Mounting Dimensions Height Width Depth Weight
20. either e Turning the TUNE knob to the desired station e Pressing the buttons labeled IV or PP to scan to the next station in either direction 4 Press MENU to exit from manual tuning 34 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Store and Clear Presets The store a preset 1 Tune a radio station as described in Manual Tuning which starts on page 34 Press the button labeled Preset The Presets screen is displayed The following illustration shows FM presets FM Presets Screen FM Presets 1 88 00 2 88 00 3 88 00 Band Clear Save 3 Turn the TUNE knob to highlight a preset location 4 Press the button labeled Save to store the preset Replace preset with Screen Replace preset with 88 30 FM OK Cancel 5 Press the button labeled OK to store the preset To cancel press the button labeled Cancel To clear an existing preset Press the button labeled Preset The Presets screen is displayed The following illustration shows FM presets FM Presets Screen FM Presets 1 88 30 2 88 00 3 88 00 Band Clear Save 2 Turn the TUNE knob to highlight the preset to be cleared Press the button labeled Clear The display shows a screen asking for confirmation to clear the preset Operations Guide DOC 6646C TunerRack Modular Multi Tuner
21. notice
22. select Then use Knob to edit Press ENTER to accept 000 000 000 000 3 Turnthe TUNE knob to set the first octet of the IP address 4 Press the button under the next octet or press ENTER to move to the next octet to select it for editing 5 Repeat steps 3 and 4 for each octet 6 To save the IP address move the cursor to the right most octet and press ENTER To cancel the operation and return to the network settings menu press MENU Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 25 TunerRack Modular Multi Tuner View MAC Address 26 e TunerRack Modular Multi Tuner CEN TRACK Crestron CEN TRACK To view the CEN TRACK or ATC AUDIONET s MAC address l 2 3 Display the network settings menu as described on page 21 Turn the TUNE knob to highlight MAC Address and press ENTER The MAC address is displayed Press MENU to return to the network settings menu Name Sources The Name Sources tool is used to assign names to cards installed in the CEN TRACK 1 Open the Installer Tools menu as described on page 19 2 Turn the TUNE knob to highlight Name Sources and press ENTER Select Source To Name Menu Select Source To Name 1 Internet Radio 2 Card not present 3 AMFM2 Edit 3 Turn the TUNE knob to highlight the source to name and press ENTER or the button labeled Edit To cancel and return to the Installer Tools
23. volume press the button labeled Down To raise the volume press the button labeled Up 4 Press ENTER to return the Installer Tools menu About The About tool is used to display information about the CEN TRACK 1 Open the Installer Tools menu as described on page 19 Turn the TUNE knob to highlight About and press ENTER Turn the TUNE knob to scroll through the available information mus os UIS Press MENU to return to the Installer Tools menu Exit the Installer Tools Menu To exit the Installer Tools menu 1 Press MENU Exit Confirmation Screen Exit Confirmation Exit Installer Tools Yes No 2 Press the button labeled Yes to exit or press the button labeled No to return the Installer Tools menu Additional Configuration To use the CEN TRACK for Internet radio services such as Pandora or SiriusXM Internet Radio some additional steps are required Use the front panel controls to setup Pandora and SiriusXM Internet Radio enable disable providers and provide secure access to the ATC AUDIONET s multimedia memory card MMC TunerRack Modular Multi Tuner CEN TRACK e 27 TunerRack Modular Multi Tuner Crestron CEN TRACK Pandora Use of the Pandora service requires a user account The first time the Pandora service is selected for listening a user account must be entered or created 1 Press the TUNERS button for an installed Internet radio tuner If the tuner is
24. 8 Press MENU to return to the previous screen e Change PIN The PIN used to tune a locked station and setup stations can be changed from the front panel To change the PIN 1 Press the button labeled Setup A screen to enter a Personal Identification Number PIN is displayed Please enter PIN Screen Please enter PIN 000 Sirius 2 lt gt Enter 2 Turn the TUNE knob to display the first digit of the PIN the factory default is 1234 3 Press the buttons labeled lt or gt to move the cursor to the previous or next digit and enter the rest of the PIN 4 When the PIN is displayed press the button labeled Enter to open the Setup menu Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 41 TunerRack Modular Multi Tuner Crestron CEN TRACK Store and Clear Presets Setup Menu Setup Setup Channels Change PIN 5 Turn the TUNE knob to highlight Change PIN and press ENTER A screen for changing the PIN is displayed Change Pin Screen Current PIN 1234 Enter New PIN 11234 Sirius 2 Cancel lt gt Enter 6 Turn the TUNE knob to display the first digit of the new PIN 7 Press the buttons labeled lt or gt to move the cursor to the previous or next digit and enter the rest of the PIN 8 When the PIN is displayed press the button labeled Enter to save the PIN To cancel press the button labeled Cancel 9 Press MEN
25. Crestron CEN TRACK TunerRack Modular Multi Tuner Operations Guide CRESTRON This document was prepared and written by the Technical Documentation department at Z CRESTRON Regulatory Compliance As of the date of manufacture the CEN TRACK has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling CE Federal Communications Commission FCC Compliance Statement This device complies with part 15 of the FCC Rules Operation is subject to the following conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation CAUTION Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment d
26. DIONET Pandora Internet Radio Choose the Pandora option to create and listen to Pandora Internet Radio stations Create a Station To create a Pandora station Press the button labeled Browse 2 Turnthe TUNE knob to highlight Pandora and press ENTER A list of Pandora stations is displayed Pandora Station Menu Pandora QuickMix U2 amp Green Day Radio Yesterday Radio Back Create NOTE If Pandora is being used for the first time or no one has logged in options for logging in or creating a Pandora account are displayed Refer to Pandora on page 28 for details 3 Press the button labeled Create Enter an artist song or composer Screen Enter an artist song or c Back Delete 48 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner 4 Turn the TUNE knob to display the first letter of the search term and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back 5 Repeat step 4 for each letter in the search term and press ENTER 6 Press the button labeled Submit to continue Options are displayed Songs or Artists Screen Songs or Artists Display Songs Display Artists Back Create 7 Turn the TUNE knob to highlight the desired option and press ENTER Selections that correlate to the search term are d
27. EN TRACK FM WE Slot 5 CEN TRACK FMRDS WE Slot 6 CEN TRACK AM amp Slot 2 Empty CEN TRACK Expansion Slot amp Slot 3 Empty CEN TRACK Expansion Slot WE Slot 4 CEN TRACK System Controls x Slot 5 CEN TRACK GUI Browse Context 44 WE Slot 1 CEN TRACK AMFM GUI Browse Context WE Slot 2 CEN TRACK XM GUI Browse Context WE Slot 3 CEN TRACK Sirius GUI Browse Context amp Slot 6 Empty CEN TRACK Browse Context Slot ABE amp Slot 54 Empty CEN TRACK Browse Context Slot amp IP ID 04 EMPTY Z IP ID FE EMPTY FS Slot 9 C2Net Device WB Slot 10 C21 PRO2 LCDPANEL If additional CEN TRACK devices are to be added repeat step 1 for each device Each CEN TRACK is assigned a different IP ID number as it is added TunerRack Modular Multi Tuner CEN TRACK e 15 Operations Guide DOC 6646C TunerRack Modular Multi Tuner Crestron CEN TRACK 3 If necessary double click a device to open the Device Settings window and change the IP ID as shown in the following illustration Device Settings Crestron CEN TRACK Window Device Settings Crestron CEN TRACK Connection Sheet Ethernet Upload Address Device Info Device Name IP Net Address IP ID e m lt IP ID C Remap this IP ID at program upload Default Address Use IP Address C Use Host Name Cancel NOTE The IP ID specified in the SIMPL Windows program must match the IP ID of each unit Refer to Identity Code on p
28. ER to accept 000 000 000 000 3 Turn the TUNE knob to set the first octet of the subnet mask 22 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner 4 Press the button under the next octet or press ENTER to move to the next octet to select it for editing 5 Repeat steps 3 and 4 for each octet 6 To save the subnet mask move the cursor to the right most octet and press ENTER To cancel the operation and return to the network settings menu press MENU Set the Default Router The default router can be manually set or obtained from a DHCP server For information on enabling DHCP to obtain a default router refer to Enable Disable DHCP below To manually set the default router 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight Default Router and press ENTER If DHCP is enabled the default router is displayed Otherwise the Edit Default Router screen is displayed Edit Default Router Screen Edit Default Router Use Softbutton to select Then use Knob to edit Press ENTER to accept 000 000 000 000 3 Turn the TUNE knob to set the first octet of the default router 4 Press the button under the next octet or press ENTER to move to the next octet to select it for editing 5 Repeat steps 3 and 4 for each octet 6 To save the default router move the cursor t
29. TRACK CEN TRACK Physical View Rear Shown with ATC AMFM2 Card Installed iT cay eee aa DERE AMANT m AMANT FM ANT 6 7 u Y zb Guten SLOT 1 OUTPUTS ON SOURCES 1 amp 2 SLOT 2 OUTPUTS ON SOURCE 3 amp 4 SLOT 3 OUTPUTS ON SOURCE 5 amp 6 G NEIN 09 O O e LAN COMPUTER N 1 AUDIO 2 T 3 AUDIO 4 ax 5 AUDIO 6 ER ZR E 3 4 Lion LSR 6 g La 20A LI 3 6 9 OO gm cmm O O mmp mn O O mmn uum Ye DO NOT INSERT OR REMOVE MODULES WHILE POWER IS ON CRESTRON ELECTRONICS INC ROCKLEIGH NJ 07647 USA Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 5 TunerRack Modular Multi Tuner CEN TRACK Overall Dimensions Top Front and Rear View Crestron CEN TRACK ei AN i QD is O OOOSOCoOOCOGOOGO ea Ka T etela O00 7 UD 50 O OO 0 7 L See eee 9 69 in 247 mm ed 10 30 in OOO 262 mm e e SSS il 17 03 in 433 mm i 3 47 in 88 mm Y 6 e TunerRack Modular M
30. U to return to the previous screen Control the XM Tuner The XM tuner controls allow the user to tune stations and store and recall presets It also provides an option to hide selected stations from the channel list To select an XM tuner press the TUNERS button for an installed XM tuner To store a station as a preset 1 Turn the TUNE knob to select the desired station 2 Press the button labeled Preset The Presets screen is displayed Presets Screen XM Presets 1 Preset 1 0 2 Preset 2 0 3 Preset 3 0 Clear Save 3 Turn the TUNE knob to highlight a preset location 4 Press the button labeled Save to store the preset 42 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Replace preset with Screen Replace preset with Pure Jazz 72 OK Cancel 5 Press the button labeled OK to store the preset To cancel press the button labeled Cancel To clear an existing preset 1 Press the button labeled Preset The Presets screen is displayed Presets Screen XM Presets 1 POTUS 08 130 2 Preset 2 0 3 Preset 3 0 Clear Save 2 Turn the TUNE knob to highlight the preset to be cleared 3 Press the button labeled Clear The display shows a screen asking for confirmation to clear the preset Are you sure you want to clear this preset Scree
31. age 9 Program Manager Program Manager is the view where programmers program a Crestron control system by assigning signals to symbols The symbol can be viewed by double clicking on the icon or dragging it into Detail View Each signal in the symbol is described in the SIMPL Windows help file F1 16 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features However before attempting to upload or upgrade it is necessary to establish communication Once communication has been established files for example programs or firmware can be transferred to the control system or device Finally program checks can be performed such as changing the device ID or creating an IP table to ensure proper functioning Establishing Communication Use Crestron Toolbox for communicating with the CEN TRACK refer to the Crestron Toolbox help file for details There are two methods of communication USB and TCP IP USB NOTE Required for initial setup of Ethernet parameters USB Communication PC Running USB CEN TRACK Crestron Toolbox The COMPUTER port on the CEN TRACK connects to the USB port on the PC via the included Type A to Type B USB cable 1 Use the Address Book in Cr
32. already in use options are displayed in the following menu Internet Radio Tuner Menu Classical Barock Music Belgium Internet Radio MP3 128K Add Favs Browse Setup Otherwise the Favorites menu is displayed Favorites Menu Favorites Classical Rock Browse 2 Press the button labeled Browse 3 Turn the TUNE knob to highlight Pandora and press ENTER 4 Log into the Pandora service using an existing Pandora account starting below or create a new one as shown on page 29 Pandora Setup Menu Pandora Setup have a Pandora account am new to Pandora Back Favs NOTE The ATC AUDIONET can be used to access the free Pandora or pay Pandora One service It can also be used to create an account for the free service However it cannot be used to create an account for the pay service Use an Existing Pandora Account To use an existing Pandora account 1 Turn the TUNE knob to highlight have a Pandora account and press ENTER The Enter username email address screen is displayed 28 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Enter username email address Screen Enter username email a Back Delete Turn the TUNE knob to display the first letter of the account s email address and press ENTER To delete a letter press the button labeled
33. and return to the Installer Tools menu Network Settings NOTE Changes to network settings take effect when the Installer Tools menu is exited Refer to the Exit the Installer Tools Menu on page 27 The network settings menu is used to configure the CEN TRACK s and ATC AUDIONET s if installed network settings To display the network settings menu 1 Open the Installer Tools menu as described on page 19 2 Turn the TUNE knob to highlight Network Settings and press ENTER If an ATC AUDIONET is installed the menu below is displayed Select Device To Setup Menu Select Device To Setup CEN TRACK Slot 1 ATC Audionet Otherwise the CEN TRACK Setup menu is displayed CEN TRACK Setup Menu CEN TRACK Setup IP Address Subnet Mask Default Router Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 21 TunerRack Modular Multi Tuner Crestron CEN TRACK 3 Ifan ATC AUDIONET is not installed skip to step 4 If an ATC AUDIONET is installed turn the TUNE knob to highlight the device to configure press ENTER and continue to step 4 4 Turn the TUNE knob to highlight the parameter to be adjusted or viewed and press ENTER Set the IP Address The CEN TRACK and ATC AUDIONET use TCP IP communications for communications between a control system and a PC The IP address can be manually set or obtained from a DHCP server For information on enabl
34. antly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 Y
35. ay not appear on the list of stations if they broadcast in a format that is not supported by the ATC AUDIONET For a list of supported formats refer to latest revision of the ATC AUDIONET Operations amp Installation Guide Doc 6933 Further Inquiries To locate specific information or resolve questions after reviewing this guide contact Crestron s True Blue Support at 1 888 CRESTRON 1 888 273 7876 or refer to the listing of Crestron worldwide offices on the Crestron Web site www crestron com offices for assistance within a particular geographic region To post a question about Crestron products log onto the Online Help section of the Crestron Web site www crestron com onlinehelp First time users must establish a user account to fully benefit from all available features Future Updates As Crestron improves functions adds new features and extends the capabilities of the CEN TRACK additional information may be made available as manual updates These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision Check the Crestron Web site periodically for manual update availability and its relevance Updates are identified as an Addendum in the Download column Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 53 TunerRack Modular Multi Tuner Crestron CEN TRACK Return and Warranty Policies Merchandise Returns R
36. c Shield Label the Buttons Use Crestron Engraver software to print custom labels for the CEN TRACK s front panel buttons and LEDs Crestron recommends printing on 100 pound paper Paper weighing less than 100 pounds tends to crumple while sliding in while paper weighing more than 100 pounds may not fit 12 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Programming Software Have a question or comment about Crestron software Answers to frequently asked questions FAQs can be viewed in the Online Help section of the Crestron Web site To post a question or to view questions submitted to Crestron s True Blue Support log in at www crestron com onlinehelp First time users must establish a user account to fully benefit from all available features Earliest Version Software Requirements for the PC NOTE The latest software can be downloaded from the Crestron Web site www crestron com software Crestron provides an assortment of Windows based software tools to develop a customized system Use SystemBuilder or SIMPL Windows to create a program to control the CEN TRACK Programming with SystemBuilder SystemBuilder is a comprehensive programming environment Appropriate for most systems it can quickly and easily generate a complete working program including both control processor logic and touch screen graphics Programming with SIMPL Wind
37. d XM Satellite Radio Tuner Card Included quantity for CEN TRACK AMFMXMD 1 Internet Radio Tuner Card Included quantity for CEN TRACK AUDIONET 1 Included quantity for CEN TRACK AMFM2 CEN TRACK AMFMXMD CEN TRACK AUDIONET 1 Dual AM FM Tuner Card AM FM and XM Satellite Radio Tuner Card Internet Radio Tuner Card Antenna Extension Cable for XM Radio Crestron Certified Interface cables Satellite Radio Antenna Distribution Products 1 The latest software versions can be obtained from the Crestron Web site Refer to the NOTE following these footnotes 2 Crestron 2 Series control systems include the AV2 and PRO2 Consult the latest Crestron Product Catalog for a complete list of 2 Series control systems NOTE Crestron software and any files on the Web site are for authorized Crestron dealers and Crestron Authorized Independent Programmers CAIPs only New users must register to obtain access to certain areas of the site including the FTP site 4 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Physical Description This section provides information on the connections controls and indicators available on the CEN TRACK CEN TRACK Physical View Front PROFESSIONAL TUNER CARD RACK SOURCES XM Music Lab 5i MENU Second Lucy AM1 FM1 AM2 FM2 AM3 FM3 SIRIUS 1 My Only Witness DISPLAY oc Menu Preset Tune _ CRESTRON CEN
38. e Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened const
39. e DNS server c Press the button under the next octet or press ENTER to move to the next octet to select it for editing d Repeat steps b and c for each octet e To save the DNS server address move the cursor to the right most octet and press ENTER To cancel the operation and return to the previous screen press MENU 5 Press MENU to return to the previous screen View or Set IP ID The CEN TRACK and ATC AUDIONET are identified to a control system by an IP ID For additional information on IP IDs refer to Identity Code on page 9 To set the IP ID 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight Control System IP ID and press ENTER The Edit Control Sys IP ID screen is displayed with the current IP ID Edit Control Sys IP ID Screen Edit Control Sys IP ID 03 3 Turn the TUNE knob to display the desired IP ID and press ENTER to select it The display returns to the previous screen To cancel the operation and return to the network settings menu press MENU Set Control System IP The IP address of the master control system must be specified To specify an IP Address address 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight Control System IP Address and press ENTER The Edit Ctrl Sys IP Address screen is displayed Edit Ctrl Sys IP Address Screen Edit Ctrl Sys IP Address Use Softbutton to
40. epair Service 1 No merchandise may be returned for credit exchange or service without prior authorization from Crestron To obtain warranty service for Crestron products contact an authorized Crestron dealer Only authorized Crestron dealers may contact the factory and request an RMA Return Merchandise Authorization number Enclose a note specifying the nature of the problem name and phone number of contact person RMA number and return address 2 Products may be returned for credit exchange or service with a Crestron Return Merchandise Authorization RMA number Authorized returns must be shipped freight prepaid to Crestron 6 Volvo Drive Rockleigh N J or its authorized subsidiaries with RMA number clearly marked on the outside of all cartons Shipments arriving freight collect or without an RMA number shall be subject to refusal Crestron reserves the right in its sole and absolute discretion to charge a 15 restocking fee plus shipping costs on any products returned with an RMA 3 Return freight charges following repair of items under warranty shall be paid by Crestron shipping by standard ground carrier In the event repairs are found to be non warranty return freight costs shall be paid by the purchaser Crestron Limited Warranty Crestron Electronics Inc warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three 3 years from the date of purchase from Crest
41. ername Username saved Back Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 31 TunerRack Modular Multi Tuner Crestron CEN TRACK d Press the button labeled Back to return to the Setup Sirius menu 4 Turn the TUNE knob to highlight Set Password and press ENTER NOTE The password is case sensitive Enter password Screen SiriusXM Online Enter password Back Delete a Turnthe TUNE knob to display the first letter of the password and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back b Repeat step a for each letter in the password and press ENTER c Press the button labeled Submit to enter the password A confirmation screen is displayed Set Password Password Saved Screen Set Password Password saved Back d Press the button labeled Back to return to the Setup Sirius menu 5 Press the button labeled Back to return to the previous screen Enable Disable Providers To specify which services are displayed in the Internet Radio tuner s Browse menu select Enable Disable Providers from the Setup menu A list of providers and their respective status is displayed Enable Disable Provider Screen Enable Disable Provider Internet Radio is enabled Sirius is enabled Librivox Audiobooks is enable Back Enabled providers are disp
42. ers Setup Samba Password 30 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner 3 Turn the TUNE knob to highlight the parameter to configure and press ENTER Setup SiriusXM Online To setup SiriusXM Online select Setup Sirius and press ENTER Then set the username and password used to login to the SiriusXM online service NOTE A paid subscription to online access is required Free trial accounts are not supported NOTE If the user does not use the SiriusXM online service disable the service as described in Enable Disable Providers on page 32 Setup Sirius Menu Setup Sirius Set Username Set Password Back l There is no SiriusXM streaming account go to www siriusxm com to set one up 2 Turn the TUNE knob to highlight Set Username and press ENTER 3 Enterthe username NOTE The username is case sensitive Enter username Screen SiriusXM Online Enter username Back Delete a Turnthe TUNE knob to display the first letter of the username and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back b Repeat step a for each letter in the username and press ENTER c Press the button labeled Submit to enter the username A confirmation screen is displayed Set Username Username Saved Screen Set Us
43. eseceseeeceseceaecnaeceeeceeeeeeneeees 13 Uploading and Upgrading sss sss sese 17 Establishing Communication sess enne 17 Programs and Firmware sse esse ee eee eee 18 Program Cheeks E S ere ORE e M inane 18 Configuration utes en ISI DR IR OO QS 19 Installer Tools Menu eene enne ener nnne nns 19 Exit the Installer Tools Menu sess 27 Additional Configuration esee eret ede edere 27 Soc RE Q 34 Control the AM FM Tuner eie ertet eet ere erre eds 34 Control the SIRIUS Tuner nee eere Eee e ERE Te 36 Control the XM TUNET ences nieder e e eR EU 42 Control the Internet Radio Tuner sss essen 46 Problem Solving menninir i E ee e e ORE E e diee He dus 52 Troubleshooting niens e e Ee Tee e Feeds 52 Reference Documents eee at eg de 53 Notes on Internet Radio rose t ESO E e EDI TRE UE edes reet 53 Further Inquifies ci T EDS EC EC esa 53 Futute Updates ee eR TR UR E ECTS E IV O E 53 Ret rn and Warranty Policies utr ERU ed t v erus CP send reed eee EHE 54 Merchandise Returns Repair Service sees eee eee 54 Crestron Limited Warranty sc e ne E ES CT EE RITE EENUE 54 GNU Gerieral Public Eicetise rH RN TS OESTE RIS AE O RENE 55 Operations Guide DOC 6646C Contents e i Crestron CEN TRACK TunerRack Modular Multi Tuner TunerRack Modular Multi Tuner CEN TRACK Introduction The CEN TRACK is a modular multi tuner capable of providing up to s
44. estron Toolbox to create an entry using the expected communication protocol USB When multiple USB devices are connected identify the CEN TRACK by entering CEN TRACK in the Model textbox the unit s serial number in the Serial textbox or the unit s hostname in the Hostname textbox The hostname can be found in the System Info window in the section marked Ethernet however communications must be established in order to see this information in the System Info window 2 Display the CEN TRACK s System Info window click the i icon communications are confirmed when the device information is displayed Uie NOTE Required for operation with a Crestron control system Ethernet Communication PC Running LAN CEN TRACK Crestron Toolbox The CEN TRACK connects to PC via Ethernet 1 Establish USB communication between CEN TRACK and PC Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 17 TunerRack Modular Multi Tuner Crestron CEN TRACK SIMPL Windows Firmware 2 Enter the IP address IP mask and default router of the CEN TRACK via Crestron Toolbox Functions Ethernet Addressing otherwise enable DHCP NOTE Use the Device Discovery Tool in Crestron Toolbox to detect all Ethernet devices on the network and their IP configuration The tool is available in Toolbox version 1 15 143 or later 3 Confirm Ethernet connection between CEN TRACK and PC If connecting throu
45. file The IP IDs of multiple CEN TRACK devices in the same system must be unique When setting the IP ID consider the following e TheIP ID of each unit must match an IP ID specified in the SIMPL Windows program e Each device using IP to communicate with a control system must have a unique IP ID NOTE If an ATC AUDIONET is installed it also requires an IP ID to be assigned Its IP ID is set using the CEN TRACK s Installer Tools utility or Crestron Toolbox For information on setting the IP ID with Installer Tools refer to Network Settings which starts on page 21 or the Crestron Toolbox help file The IP IDs of multiple ATC AUDIONET devices in the same system must be unique Installation The CEN TRACK should be used in a well ventilated area The venting holes should not be obstructed under any circumstances To prevent overheating do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications Consider using forced air ventilation incrementing the spacing between units or both to reduce overheating Consideration must be given if installed in a closed or multi unit rack assembly since the operating ambient temperature of the environment may be greater TunerRack Modular Multi Tuner CEN TRACK e 9 TunerRack Modular Multi Tuner Crestron CEN TRACK Rack Mounting than the room ambient temperature Contact with thermal insulating materials should be avoided
46. gh a hub or router use CATS straight through cables with 8 pin RJ 45 connectors Alternatively use a CATS crossover cable to connect the two LAN ports directly without using a hub or router 4 Use the Address Book in Crestron Toolbox to create an entry for the CEN TRACK with the CEN TRACK s TCP IP communication parameters 5 Display the System Info window click the i icon and select the CEN TRACK entry Programs and Firmware Program or firmware files may be distributed from programmers to installers or from Crestron to dealers Firmware upgrades are available from the Crestron Web site as new features are developed after product releases One has the option to upload programs via the programming software or to upload and upgrade via the Crestron Toolbox For details on uploading and upgrading refer to the SIMPL Windows help file or the Crestron Toolbox help file If a SIMPL Windows program is provided it can be uploaded to the control system using SIMPL Windows or Crestron Toolbox Check the Crestron Web site to find the latest firmware New users may be required to register to obtain access to certain areas of the site including the FTP site Upgrade CEN TRACK firmware via Crestron Toolbox 1 Establish communication with the CEN TRACK and display the System Info window 2 Select Functions Firmware to upgrade the CEN TRACK firmware Program Checks Using Crestron Toolbox display the System Info wi
47. holes vacated by the screws in step 1 3 Secure the ear to the unit with three screws from step 1 as shown in the following diagram Ear Attachment for Rack Mounting 4 Repeat procedure steps 1 through 3 to attach the remaining ear to the opposite side 10 TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Stacking Four feet are provided with the CEN TRACK so that if the unit is not rack mounted the rubber feet can provide stability when the unit is placed on a flat surface or stacked These feet should be attached prior to the hookup procedure NOTE No more than two CEN TRACK units should be stacked Hardware Hookup Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph Apply power after all connections have been made When making connections to the CEN TRACK use Crestron power supplies for Crestron equipment Hardware Connections for the CEN TRACK PROFESSIONAL TUNER CARD RACK HAA 6o mewu O P N o o DISPLAY O k d Headphone To Stereo Headphones S L B AP pe pusy 5 3 E dec gu
48. ibuting the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held inval
49. id or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License fro
50. ing DHCP to obtain an IP address refer to Enable Disable DHCP on page 23 To manually set an IP address 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight P Address and press ENTER If DHCP is enabled the IP address is displayed Otherwise the Edit IP Address screen is displayed Edit IP Address Screen Edit IP Address Use Softbutton to select Then use Knob to edit Press ENTER to accept 000 000 000 000 3 Turn the TUNE knob to set the first octet of the IP address 4 Press the button under the next octet or press ENTER to move to the next octet to select it for editing 5 Repeat steps 3 and 4 for each octet 6 To save the IP address move the cursor to the right most octet and press ENTER To cancel the operation and return to the network settings menu press MENU Set the Subnet Mask The subnet mask can be manually set or obtained from a DHCP server For information on enabling DHCP to obtain a subnet mask refer to Enable Disable DHCP on page 23 To manually set the subnet mask 1 Display the network settings menu as described on page 21 2 Turnthe TUNE knob to highlight Subnet Mask and press ENTER If DHCP is enabled the subnet mask is displayed Otherwise the Edit Subnet Mask screen is displayed Edit Subnet Mask Screen Edit Subnet Mask Use Softbutton to select Then use Knob to edit Press ENT
51. isplayed 8 Turnthe TUNE knob to highlight the desired selection and press ENTER to add the Pandora station Listen to Station To listen to a Pandora station Press the button labeled Browse 2 Turnthe TUNE knob to highlight Pandora and press ENTER A list of Pandora stations 1s displayed Pandora Station Menu Pandora QuickMix U2 amp Green Day Radio Yesterday Radio Back Create 3 Turnthe TUNE knob to highlight the desired station and press ENTER The station starts playing Rate or Bookmark While a song is playing the song can be rated or bookmarked To rate a song or bookmark the song or artist 1 Press the button labeled Rate 2 Turnthe TUNE knob to the desired function and press ENTER SiriusXM Internet Radio Choose the Sirius option to listen to the online feed from SIRIUS Satellite radio stations subscription to online access required To access the SIRIUS online feed 1 Press the button labeled Browse 2 Turnthe TUNE knob to highlight Sirius and press ENTER 3 Turn the TUNE knob to highlight the desired category or channel and press ENTER 4 Press the button labeled Back to return to the previous screen Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 49 TunerRack Modular Multi Tuner Crestron CEN TRACK Librivox Audiobooks Choose the Librivox Audiobooks option to listen to free audiobooks from www librivox org To select a file for listening
52. ix independent radio tuners for use in a Crestron multiroom audio distribution system Control of each tuner is available through the LCD front panel as well as from Crestron touch screens computers and mobile devices via a Crestron control system The CEN TRACK is available in three different models Models MODEL NUMBER DESCRIPTION CEN TRACK AMFM2 TunerRack Modular Multi Tuner with Dual AM FM Tuner Card CEN TRACK AMFMXMD TunerRack Modular Multi Tuner with AM FM amp XM Satellite Radio Tuner Card CEN TRACK AUDIONET TunerRack Modular Multi Tuner with Internet Radio Tuner Card For simplicity within this guide the term CEN TRACK is used except where noted Features and Functions Rack mountable modular multi tuner Accepts up to three ATC Series tuner cards Tuner card options include dual AM FM AM FM XM satellite radio or Internet radio Enables interactive control using touch screens and mobile devices Rich search capabilities find favorite radio stations programs and music with ease Support for metadata enables display of station names song titles artists and other details Includes balanced unbalanced and digital audio outputs Native Crestron system integration via Ethernet Easy setup from front panel or software 1 XM Satellite Radio and SiriusXM Internet Radio each require a paid subscription Contact Sirius XM Radio Inc for details 2 The number of outputs and digi
53. layed in the Browse menu while disabled providers are hidden in the Browse menu 1 Turn the TUNE knob to highlight the service to be enabled or disabled and press ENTER 32 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Provider Status Sirius Screen Sirius Enable Disable Back 2 Turn the TUNE knob to highlight the desired setting and press ENTER To return to the previous screen press the button labeled Back 3 Press the button labeled Back to return to the previous screen Setup Samba Password Use the Setup Samba Password option from the Setup menu to create a password to secure access to the ATC AUDIONET s memory card Enter password Screen Samba Enter password Back Delete 1 Turn the TUNE knob to display the first letter of the password and press ENTER To delete a letter press the button labeled Delete To return to the previous screen press the button labeled Back 2 Repeat step 1 for each letter in the password and press ENTER 3 Press the button labeled Submit to enter the password 4 Press the button labeled Back to return to the previous screen Logout from Pandora To change the Pandora account that is being used the current user account must be logged out To log out the current Pandora user account 1 Turn the TUNE knob to highlight Setup Pandora and press ENTER The display
54. lled Consult the specifications for each tuner card model for complete details 8 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK Setup IP ID Ventilation Operations Guide DOC 6646C TunerRack Modular Multi Tuner Network Wiring When wiring the Ethernet network consider the following e Use Crestron power supplies for Crestron equipment e Provide sufficient power to the system CAUTION Insufficient power can lead to unpredictable results or damage to the equipment Please use the Crestron Power Calculator to help calculate how much power is needed for the system www crestron com calculators Unlike other Crestron network devices the CEN TRACK does not use Cresnet for communications between the device and the control system The CEN TRACK requires the use of a high speed Ethernet connection for control system communications For information on connecting Ethernet devices in a Crestron system refer to the latest version of the Crestron e Control Reference Guide Doc 6052 which is available from the Crestron Web site www crestron com manuals Identity Code The IP ID is set within the CEN TRACK s table using the CEN TRACK s Installer Tools utility or Crestron Toolbox For information on setting an IP ID using Installer Tools refer to Network Settings which starts on page 21 For information on setting an IP table refer to the Crestron Toolbox help
55. m time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
56. medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However
57. n Are you sure you want to clear this preset OK Cancel 4 Press the button labeled OK to clear the preset or press the button labeled Cancel to cancel Recall Presets To recall a preset 1 Press the button labeled Preset The Presets screen is displayed Presets Screen XM Presets 1 POTUS 08 130 2 The 50s 5 3 XM Scoreboard 243 Clear Save 2 Turn the TUNE knob to highlight the preset station to be recalled 3 Press ENTER Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 43 TunerRack Modular Multi Tuner Crestron CEN TRACK View Categories To view stations by category 1 Press the button labeled Cat The display shows a list of categories Categories Menu Categories Decades Country Hits 2 Turn the TUNE knob to highlight the desired category 3 Press ENTER to select the highlighted category Decades Channels Screen Decades Channels 1 XM Preview 2 The 40s 3 The 50s Back 4 Turn the TUNE knob to highlight the desired station NOTE Press the DISPLAY button to view any additional information regarding a station in the list 5 Press ENTER to select the station View Channels To view stations by channel 1 Press the button labeled Chan The display shows a list of channels Channels Screen Channels 1 XM Preview 130 POTUS 08 143 Sports Guide
58. ndow click the i icon and select the Functions menu to display actions that can be performed on the CEN TRACK Be sure to use Crestron Toolbox to create the CEN TRACK IP table 1 Select Functions IP Table Setup 2 Add modify or delete entries in the IP table The CEN TRACK can have only one IP table entry 3 A defined IP table can be saved to a file or sent to the device Edit the control system s IP table to include an entry for the CEN TRACK The entry should list the CEN TRACK s IP ID specified on the CEN TRACK s IP table and the internal gateway IP address 127 0 0 1 NOTE If an ATC AUDIONET is installed its IP table must also be created 18 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Configuration Use Crestron Toolbox or the front panel of the CEN TRACK to configure the CEN TRACK for operation When the CEN TRACK is first powered up the following is displayed Loading Screen Loading CEN TRACK Choose a tuner to proceed Screen CEN TRACK Choose a tuner to proceed For information on using a tuner refer to Operation on page 34 Installer Tools Menu Use the Installer Tools menu to configure the CEN TRACK To open the Installer Tools menu press and hold MENU and DISPLAY for five seconds A menu of options is displayed Installer Tools Men
59. nnel lineup 1 Press the button labeled Setup A screen to enter a PIN is displayed Please enter PIN Screen Please enter PIN 8000 Sirius 2 lt gt Enter 2 Turn the TUNE knob to display the first digit of the PIN the factory default is 1234 3 Press the buttons labeled lt or gt to move the cursor to the previous or next digit and enter the rest of the PIN 4 When the PIN is displayed press the button labeled Enter to open the Setup menu Setup Menu Setup Setup Channels Change PIN 5 Turn the TUNE knob to highlight Setup Channels and press ENTER The channel list is displayed 40 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Setup Channels Screen Setup Channels 72 Pure Jazz 73 Spa 73 74 Blues 6 Turn the TUNE knob to highlight a channel for setup and press ENTER The setup screen for the selected channel are displayed Channel Setup Screen PureJazz 72 Parental Lock Off Hide Channel No Lock Hide 7 To lock the channel if unlocked press the button labeled Lock To unlock the channel if locked press the button labeled Unlock not shown To hide the channel from the channel lineup if revealed press the button labeled Hide To reveal the channel in the channel lineup if hidden press the button labeled Unhide not shown
60. o the previous screen e Hide Unhide Channels Channels can be hidden and unhidden from the channel lineup 1 Press the button labeled Setup Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 45 TunerRack Modular Multi Tuner Setup Channels Screen Crestron CEN TRACK Setup Channels 0 Radio ID CAXMKOC 1 XM Preview 130 POTUS 08 2 Turnthe TUNE knob to highlight a channel for setup and press ENTER The channel s setup options are displayed Setup Options Screen POTUS 08 Hide Channel No 150 Hide 3 To hide the channel from the channel lineup if revealed press the button labeled Hide To reveal the channel in the channel lineup if hidden press the button labeled Unhide not shown 4 Press MENU to return to the previous screen Control the Internet Radio Tuner The Internet radio tuner controls allow the user to tune Internet radio stations Pandora Internet Radio SiriusXM Internet Radio and listen to audiobooks from Librivox NOTE To ensure proper operation download and install the latest CEN TRACK firmware from http crestron com firmware To select an Internet radio tuner press the TUNERS button for an installed Internet radio tuner If the tuner is already in use options are displayed in the following menu Internet Radio Tuner Menu Classical Barock Music Belgium MP3 128K Setup Internet Radio Add Favs
61. o the right most octet and press ENTER To cancel the operation and return to the network settings menu press MENU Enable Disable DHCP The CEN TRACK and ATC AUDIONET can obtain an IP address subnet mask default router and DNS server information ATC AUDIONET only from a DHCP server To enable or disable DHCP 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight DHCP and press ENTER The Edit DHCP screen is displayed Edit DHCP Screen Edit DHCP Off On The current setting 1s indicated with an asterisk 3 Turn the TUNE knob to highlight the desired setting and press ENTER to select it The display returns to the previous screen To cancel the operation and return to the network settings menu press MENU Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 23 TunerRack Modular Multi Tuner Crestron CEN TRACK View or Set the Hostname The CEN TRACK and ATC AUDIONET can be identified by a hostname instead on an IP address To view or set the hostname 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight Hostname and press ENTER The Edit Hostname screen is displayed Edit Hostname Screen Edit Hostname Del lt gt Done 3 Turn the TUNE knob clockwise or counterclockwise to select a new letter uppercase or lowercase or number and press ENTER Move the cur
62. oes cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Industry Canada IC Compliance Statement Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics Inc with all rights reserved The Linux Kernel 2 6 22 as modified by Freescale Mplayer and Busybox are copyrighted under the GNU GENERAL PUBLIC LICENSE Version2 reproduced in GNU General Public License on page 55 where the corresponding source code is available at ftp ftp crestron com gpl The specific patents that cover Crestron products are listed at patents crestron com Crestron the Crestron logo Cresnet Crestron e Control Crestron Toolbox and SystemBuilder are either trademarks or registered trademarks of Crestron Electronics Inc in
63. oes not function Device is not receiving power from a Crestron power source Use the provided Crestron power source Verify connections Device is not communicating with the control system The IP address for the control system is invalid or the IP ID does not match the one defined in the SIMPL program Tuner card does not function Tuner card not properly installed Refer to the installation instructions in the guide that came with the tuner card Cannot access tuner card controls from front panel Dusty contacts on tuner card Clean contacts with cotton swab or clean cloth No sound from tuner Antenna not connected or not connected properly Verify antenna connection Station detuned or weak Tune station adjust antenna Unsubscribed tuner not on preview channel If unsubscribed be sure tuner is on preview channel Subscribed tuner not on a subscribed channel If subscribed be sure tuner is on a subscribed channel Noisy AM FM reception Improper antenna connection Verify antenna connection Tuned station does not produce sound Internet radio only Firewall settings prevent reception of streaming audio Change firewall port settings or contact network administrator Cannot receive SiriusXM streaming content Subscription required to stream SiriusXM content Subscribe to SiriusXM streaming content at WWW Sirius com
64. on all sides of the unit The CEN TRACK can be mounted in a rack or stacked with other equipment Two ears are provided with the CEN TRACK so that the unit can be rack mounted These ears must be installed prior to mounting Complete the following procedure to attach the ears to the unit The only tool required is a 1 or 2 Phillips screwdriver WARNING To prevent bodily injury when mounting or servicing this unit in a rack observe the following guidelines e When mounting this unit in a partially filled rack load the rack from the bottom to the top with the heaviest component at the bottom of the rack e Ifthe rack is provided with stabilizing devices install the stabilizers before mounting or servicing the unit in the rack NOTE If rack mounting is not required rubber feet are provided for tabletop mounting or stacking Apply the feet near the corner edges on the underside of the unit NOTE Reliable earthing of rack mounted equipment should be maintained Particular attention should be given to supply connections other than direct connections to the branch circuit e g use of power strips To install the ears 1 There are screws that secure each side of the CEN TRACK top cover Using a 1 or 2 Phillips screwdriver remove the three screws closest to the front panel from one side of the unit Refer to the diagram following step 3 for a detailed view 2 Position a rack ear so that its mounting holes align with the
65. onnected to pin 5 5 Connected to pin 4 6 RD 7 Connected to pin 8 8 Connected to pin 7 11 COMPUTER 1 USB Type B female Pin 2 Pin 1 USB computer console port Tre cable included i T L PIN DESCRIPTION LFA 1 5 VDC Pin 3 Pin 4 2 Data 3 Data 4 Ground Continued on following page TunerRack Modular Multi Tuner CEN TRACK e 7 TunerRack Modular Multi Tuner Crestron CEN TRACK Connectors Controls amp Indicators Continued CONNECTORS DESCRIPTION CONTROLS amp INDICATORS 12 SPDIF 1 6 6 RCA female S PDIF coaxial digital audio outputs 13 AUDIO 1 6 RCA 12 RCA female EN EN Provide 6 unbalanced stereo line level audio Mw Ne outputs Output impedance 100 Ohms Maximum output level 2 Vims 14 AUDIO 6 5 pin 3 5 mm detachable terminal blocks 1 6 Terminal Balanced unbalanced stereo line level outputs G Output impedance 200 Ohms balanced 100 Ohms unbalanced FETA Maximum output level 4 Vims balanced 2 Vims unbalanced 15 24 VDC 2 0A 1 2 1 mm barrel DC power jack ex 24 Volt DC power input A power pack included 16 G 1 6 32 screw chassis ground lug 1 Interface connectors for AUDIO 1 6 terminal ports are provided with the unit Pressing and holding MENU DISPLAY and ENTER for five seconds initiates a software reset 3 The number of outputs and digital output capability are dependent upon the tuner cards insta
66. ou may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 55 TunerRack Modular Multi Tuner Crestron CEN TRACK You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary
67. ows NOTE While SIMPL Windows can be used to program the CEN TRACK it is recommended to use SystemBuilder for configuring a system SIMPL Windows is Crestron s premier software for programming Crestron control systems It is organized into two separate but equally important Managers Configuration and Program Configuration Manager Configuration Manager is the view where programmers build a Crestron control system by selecting hardware from the Device Library 1 To incorporate the CEN TRACK into the system drag the CEN TRACK from the Ethernet Control Modules Ethernet Audio Modules folder of the Device Library and drop it in the System Views Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 13 TunerRack Modular Multi Tuner Crestron CEN TRACK Locating the CEN TRACK and Tuner Cards in the Device Library C Crestron Devices DvcLib 669 3j Control Systems G Cresnet Control Modules 9 DigitalMedia 9 Discontinued X Ethernet Control Modules Ethernet Audio Modules BE AAS Browse Context Ge 1 E FH S CEN TRACK 4 x CEN TRACK GUI Browse Context 4 ES CEN TRACK Simple Browse Context 4 SL 29 Plug in Control Cards zy Cards 2 Series Y Bus zy Cards 2 Series Z Bus Cards CEN TRACK WE ATC AUDIONET CEN TRACK 4 BE CEN TRACK AMFM2 4 EE CEN TRACK AMFMSR 4 WE CEN TRACK AMFMXM4
68. ron with the following exceptions disk drives and any other moving or rotating mechanical parts pan tilt heads and power supplies are covered for a period of one 1 year touch screen display and overlay components are covered for 90 days batteries and incandescent lamps are not covered This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer Purchasers should inquire of the dealer regarding the nature and extent of the dealer s warranty if any Crestron shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse accidental damage modification or improper installation procedures Furthermore this warranty does not cover any product that has had the serial number altered defaced or removed This warranty shall be the sole and exclusive remedy to the original purchaser In no event shall Crestron be liable for incidental or consequential damages of any kind property or economic damages inclusive arising from the sale or use of this equipment Crestron is not liable for any claim made by a third party or made by the purchaser for a third party Crestron shall at its option repair or replace any product found defective without charge for parts or labor Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the
69. rooms each enjoy their own choice of music news sports and talk Both balanced and unbalanced analog outputs are provided making the CEN TRACK ideal for use in all types of professional and commercial applications as well as the finest residential installations Digital outputs are also included to deliver the highest quality audio interface from satellite and Internet radio sources Metadata Display Satellite radio services as well as many FM and Internet radio stations send text information called metadata as part of their broadcast signals Metadata can include the radio station name program or song title artist name category traffic weather and phone numbers All of this information is displayed on the TunerRack s front panel LCD screen Furthermore it can also be displayed on any Crestron touch screen or APAD controller providing useful information to the listener at any location throughout the home or office Program Guide Each satellite and Internet radio tuner supports powerful browsing capabilities through an extensive program guide which can be customized for display on any Crestron touch screen or computer listing every available channel and what is currently playing on each channel Versatile search options make it fun and easy to locate whatever users want to hear Multiple users can each have full access to browse any of the available tuner program guides simultaneously without conflict and favorite stations
70. shows Log Out as the highlighted option 2 Press ENTER to continue or press the button labeled Back to return to the previous screen 3 To complete the log out procedure turn the TUNE knob to highlight Yes and press ENTER To cancel turn the TUNE knob to highlight No and press ENTER Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 33 TunerRack Modular Multi Tuner Crestron CEN TRACK Operation Manual Tuning This section describes use of the front panel to control a tuner card installed in the CEN TRACK To select a tuner press one of the six buttons labeled TUNERS The options for the selected tuner are displayed If there is no tuner installed in the selected slot the CEN TRACK displays the following screen There is no tuner installed in this location Screen There is no tuner installed in this location Control the AM FM Tuner The AM FM tuner controls allow the user to tune and scan stations change bands between AM and FM and store and recall presets To select an AM FM tuner press the TUNERS button for an installed AM FM tuner card AM FM Tuner Options FM Station Menu 88 00 FM Stereo AMFM 1 Preset Manual Tech To manually tune a station 1 Press the button labeled Manual Manual Tuning Screen 88 30 FM Stereo AMFM 1 I kal Band 2 Press the button labeled Band to switch between the AM and FM bands 3 Tune a station by
71. sor by pressing the buttons labeled lt or gt The hostname can be up to 64 characters in length To delete a character position the cursor under the character to be deleted and press the button labeled Del To cancel the operation and return to the previous screen press MENU 4 Press the button labeled Done to save the hostname To cancel the operation and return to the network settings menu press MENU Specify DNS Servers The ATC AUDIONET uses DNS servers to download Internet radio artwork for ATC AUDIONET Only display in a touch screen project DNS servers should only be specified when using static IP addressing DHCP disabled To specify a DNS Server 1 Display the network settings menu as described on page 21 2 Turn the TUNE knob to highlight DNS Server and press ENTER The DNS Servers screen is displayed DNS Servers Screen DNS Servers 192 168 200 134 192 168 200 242 192 168 200 244 Delete Add 3 To delete an entry turn the TUNE knob to the entry to be deleted and press the button labeled Delete 4 To add an entry a Press the button labeled Add Enter New DNS Server Screen Enter New DNS Server Use Softbutton to select Then use Knob to edit Press ENTER to accept 000 000 000 000 24 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner b Turn the TUNE knob to set the first octet of th
72. splayed 36 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner Presets Screen Sirius Presets 1 Preset 1 0 2 Preset 2 0 3 Preset 3 0 Clear Save 3 Turn the TUNE knob to highlight a preset location 4 Press the button labeled Save to store the preset Replace preset with Screen Replace preset with Pure Jazz 72 OK Cancel 5 Press the button labeled OK to store the preset To cancel press the button labeled Cancel To clear an existing preset 1 Press the button labeled Preset The Presets screen is displayed Presets Screen Sirius Presets 1 POTUS 08 130 2 Preset 2 0 3 Preset 3 0 Clear Save Turn the TUNE knob to highlight the preset to be cleared Press the button labeled Clear The display shows a screen asking for confirmation to clear the preset Are you sure you want to clear this preset Screen Are you sure you want to clear this preset OK Cancel 4 Press the button labeled OK to clear the preset or press the button labeled Cancel to cancel Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 37 TunerRack Modular Multi Tuner Crestron CEN TRACK Recall Presets To recall a preset 1 Press the button labeled Preset The Presets screen is displayed Presets Screen Sirius
73. tal output capability are dependent upon the tuner cards installed Consult the specifications for each tuner card model for complete details Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 1 TunerRack Modular Multi Tuner Crestron CEN TRACK Modular Tuner Cards Up to three ATC Series tuner cards can be installed in the CEN TRACK to enable combinations of AM FM terrestrial radio XM satellite radio and Internet radio tuners The modular card based design makes it easy to change or expand the tuner configuration as needs change or upgrade any tuner card as new features and services become available Each CEN TRACK model comes with one tuner card included Choose any combination of up to three tuner cards s Dual AM FM Radio Each ATC AMFM2 tuner card provides two completely independent AM FM tuners with RDS RBDS to support two separate listening zones e AM FM amp XM Satellite Radio Each ATC AMFMXMD tuner card provides one XM satellite radio tuner and one AM FM tuner with RDS RBDS to support two separate listening zones e Internet Radio Each ATC AUDIONET tuner card provides a single Internet radio tuner for streaming over 15 000 available online radio stations and podcasts from around the world including Pandora and SiriusXM Internet Radio Multiple Outputs Up to six independent audio outputs allow for connection to any multi room audio distribution system letting listeners in different
74. the United States and or other countries Windows is either a trademark or registered trademark of Microsoft Corporation in the United States and or other countries Pandora is either a trademark or registered trademark of Pandora Media Inc in the United States and or other countries SiriusXM and XM are either trademarks or registered trademarks of Sirius XM Radio Inc in the United States and or other countries Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products Crestron disclaims any proprietary interest in the marks and names of others 2012 Crestron Electronics Inc Crestron CEN TRACK TunerRack Modular Multi Tuner Contents TunerRack Modular Multi Tuner CEN TRACK 1 Introduction 2 ee RR REED ERN NE e he ER RENE dee anes 1 Features and Punctiofis css nd e d RE RE I e reda te eia EU 1 Specifications dee cie DERE e Run ERR NETUS ERA EUN SERT EE QN ee HRS the ae NS 3 Physical D scription oe ctt eC eR Ae t e e ertet heat 5 Nul T EE 9 Network Witt a ee Re Ee eee e ei avete eese 9 Identity Code e eco ee eR RR OTI C QE ena eee 9 TEE T ounce o tete tier testator 9 Hardware Hookup sese ene ener nnns 11 Programming Software sse eene nennen nnne 13 Earliest Version Software Requirements for the PC see 13 Programming with SystemBuilder sees 13 Programming with SIMPL Windows cccceescessseesceesc
75. u Installer Tools Select Tuner Format Configure Front Panel Network Settings The following controls are used to navigate through the Installer Tools menu e TUNE Knob Turn the TUNE knob to highlight the desired option The highlighted option is underlined s ENTER Button Press the ENTER button to select a highlighted item or to store a setting e MENU Button Press the MENU button to return to the previous menu Operations Guide DOC 6646C TunerRack Modular Multi Tuner CEN TRACK e 19 TunerRack Modular Multi Tuner Crestron CEN TRACK The Installer Tools menu presents several parameters to configure Turn the TUNE knob to view the options e Select Tuner Format Specifies the North American or European tuning format when using a tuner card e Configure Front Panel Used to lock or unlock the front panel e Network Settings Configures the CEN TRACK to communicate with a control system over Ethernet If an ATC AUDIONET is installed this section is also used to configure the card s network settings e Name Sources Allows custom naming of cards installed in the CEN TRACK e Set Headphone Volume Sets the headphone volume level e About Provides information about the CEN TRACK such as IP data and firmware version To configure a specific parameter turn the TUNE knob to highlight an option and press ENTER To exit the Installer Tools menu and save changes to the
76. ulti Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK Operations Guide DOC 6646C TunerRack Modular Multi Tuner Connectors Controls amp Indicators CONNECTORS DESCRIPTION CONTROLS amp INDICATORS 1 HW R 1 Recessed miniature push button for hardware reset reboots the unit 2 Headphones 1 3 5 mm mini TRS phone jack 3 MENU 1 Push button steps menu back one level 4 DISPLAY 1 Push button toggles information displayed on the LCD screen 5 LCD Display Green LCD dot matrix 128 x 64 resolution amp Buttons adjustable LED backlight Displays tuner settings metadata and setup menus 4 LCD display driven push buttons select activate various menu functions 6 TUNE 1 Continuous turn rotary encoder scrolls through channels presets and other menu lists adjusts selected parameters 7 ENTER 1 Push button executes value set by the TUNE knob 8 TUNERS 6 Push buttons 6 red LEDs and 6 3 8 label slots select which tuner is being displayed and adjusted 9 SLOT 1 3 3 Tuner card slots Accept choice of ATC series tuner cards 10 LAN 1 8 wire RJ 45 female 8P8C modular jack Green Amber 10BASE T 100BASE TX Ethernet port LED LED Green LED indicates link status Yellow LED indicates Ethernet activity TYPE PIN SIGNALS 8 Position 1 TD RJ 45 2 TD Pin8 Pin1 3 RD 4 C
77. warranty Except as expressly set forth in this warranty Crestron makes no other warranties expressed or implied nor authorizes any other party to offer any warranty including any implied warranties of merchantability or fitness for a particular purpose Any implied warranties that may be imposed by law are limited to the terms of this limited warranty This warranty statement supersedes all previous warranties 54 e TunerRack Modular Multi Tuner CEN TRACK Operations Guide DOC 6646C Crestron CEN TRACK TunerRack Modular Multi Tuner GNU General Public License Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed PREAMBLE The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not pric
78. way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy ofthis License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution

Operations Guide: CEN-TRACK

Contents

Download Pdf Manuals

Related Search

Related Contents