User`s Guide VFP15 FAMILY 15” FLAT PANEL DISPLAY
Contents
1. Plug the power cord into the rear ofthe display and then plug the cord into an AC power source Turn on the display The Green ON LED should light Ifthe Amber NO SYNC LED is lit refer to the Troubleshooting section CONTROLS On Screen Menu OSM Controls The OSM controls on the front of the monitor functions as follows To access the OSM menu press any ofthe Adjust buttons or Control buttons lt gt or the NEXT SELECT button Control EXIT Exits the OSM controls lt gt Moves the highlighted area left right to select desired sub menus NEXT Selects the highlighted submenu of the SELECT Main Menu RESET Resets the adjustment function within the highlighted area to the factory setting Sub Menu Exits to the OSM controls main menu Moves the bar left right to increase or decrease the selected adjustment Moves the highlighted area to select one of the functions Activate Auto Adjust Function or Activate Selected submenu Resets the highlighted adjustment function to the factory setting Note When RESET is pressed a warning window will appear allowing you to cancel the reset function BRIGHTNESS CONTRAST CONTROLS BRIGHTNESS Adjusts the overall image and background screen brightness CONTRAST Adjusts the image brightness in relation to the background AUTO ADJUST CONTRAST Adjust the image displayed for non standard video inputs Document No 150 VFP5 003 Re2. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE ALSO DO NOT USE THIS UNIT S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED DO NOT OPEN THE CABINET THERE ARE HIGH VOLTAGE COMPONENTS INSIDE REFER SERVICING TO OUALIFIED SERVICE PERSONNEL RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO OUALIFIED SERVICE PERSONNEL This symbol warns the user that uninsulated voltage within the unit may be large enough to cause electric shock Therefore it is dangerous to touch any part inside the unit operation and maintenance of this unit has been included Read it carefully to avoid any problems i This symbol alerts the user that important literature about the Document No 150 VFP5 003 Rev A May 2004 PRODUCT SAFETY PRECAUTIONS The socket outlet of power supply shall be installed near the equipment and shall be easily accessible Follow all warnings and instructions marked on the display Do not attempt to service this display yourself There are no user replaceable parts inside and removing the display cover or back will expose you to dangerous voltage or other risks Refer all servicing to qualified service personnel Adequate ventilation must be maintained to ensure reliable and continued operation and to protect the display from overheating Do not block
3. AYDIN DISPLAYS Inc Birdsboro PA 19508 USA Phone 610 404 7400 Fax 610 404 8190 User s Guide VFP15 FAMILY 15 FLAT PANEL DISPLAY Document No 150 VFP5 003 Rev A May 2004 NOTICE This manual is subject to change without notice and should not be construed to be a commitment in any form by Aydin Displays Aydin Displays reserves the right to make improvements to the product at any time It is understood that the delivered product will be of the latest possible design and that it may not be exactly as stated herein This manual may contain descriptions of functions not implemented at time of distribution unless prior contractual arrangements have been made Aydin Displays reserves the right to modify or revise the content of this manual It is further understood that in consideration of the receipt or purchase of this manual the recipient or purchaser agrees not to reproduce disseminate the information herein or copy it by any means whatsoever nor to permit such actions by others for any purpose without the written permission of Aydin Displays All trademarks and registered trademarks are recognized as the property of their respective owners Document No 150 VFP5 003 Rev A May 2004 FEDERAL COMMUNICATIONS COMMISSION REQUIREMENTS This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device mu
4. ded on Product CD is a downloaded copy from the following listed companies Aydin Displays Inc does not warrant any of the touch software The driver software has been downloaded from the appropriate web sites and is only updated every January Please refer to the appropriate web site for the latest updates Prior to utilizing these drivers please read the enclosed End User License Agreement in the Read Me File doc included on the Product CD If you do not agree with any part off or all the agreements contact the listed Software Touch Screen Company The names of actual companies and products mentioned herein may be trademarks of their respective owners Resistive Touch AccuTouch M Elo TouchSystems a unit of Tyco Electronics Infrared Touch CarrollTouch Elo TouchSystems a unit of Tyco Electronics Surface Acoustic Wave SAW IntelliTouch Elo TouchSystems a unit of Tyco Electronics www elotouch com Capacitive Touch ClearTek 3M Microtouch 3M Touch Systems was created by acquisitions of two established touch companies Dynapro and MicroTouch Systems Near Field Imaging NFI 3M Microtouch www 3Mtouch com Document No 150 VFP5 003 Rev A May 2004 9 VECTOR 15 SPECIFICATIONS Visual Performance Display Type 15 0 TFT Active Matrix LCD Active Display Area 304mm x 228mm 12 0in x 9 0in Pixel Pitch 0 30 mm Luminance 250cd m typ Contrast Ratio 400 1 typ Resolutions Supported 720 x 400 VGA te
5. ff for one hour to erase the image IMAGE IS UNSTABLE UNFOCUSED OR SWIMMING IS APPARENT e Signal cable video should be completely attached to the computer and display e Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the FINE setting When the display mode is changed the OSM Image Adjust settings may need to be re adjusted DISPLAY IMAGE IS NOT SIZED PROPERLY e Use the OSM Image Adjust controls to increase or decrease the H SIZE setting TOMER SERVICE CONTACT INFORMATION Ted Trombley Phone 610 404 5370 E Mail trombley aydindisplays com Document No 150 VFP5 003 Rev A May 2004 11 Gi LII 00005170 BAYDINDISPLAYS e E 5 G 8 CONTROL lt gt Document No 150 VFP5 003 Rev B A VFP15 RACK MOUNT A May 2004 12 e kd a B i foe gi z i i Bi M 3 Tell CONTROL BAYDINDISPLAYS OUTLINE DRAWING Document No VFP15 PANEL MOUNT 150 VFP5 003 Rev A May 2004 13
6. ns To de activate the OSM Lock Out function simultaneously press and hold the NEXT and buttons RESOLUTION NOTIFIER The optimal resolution is 1024 x 768 If ON is selected a message will appear on the screen after 30 seconds notifying the operator that the resolution is not at 1024 x 768 FACTORY PRESET Selecting Factory Preset resets all OSM control settings back to the factory settings The RESET button will need to be held down for several seconds to take effect Individual settings can be reset highlighting the control to be reset and pressing the RESET button CLEANING AND CARE OF PROTECTIVE DISPLAY LENS e Always damp dust the acrylic protective lens For best results mix a solution of one teaspoon of mild dishwashing liquid and one pint of water Apply this solution with a spray bottle and wipe dry with a clean cotton cloth e Do Not Use Window cleaning fluids scouring compounds gritty cloths leaded or ethyl gasoline or strong solvents such as alcohol acetone carbon tetrachloride etc Document No 150 VFP5 003 Rev A May 2004 TOUCH SCREEN INFORMATION This information only applies to customers who have ordered a flat panel with a touch screen installed Due to the constantly changing world of PC operating systems it is recommended by the manufacturer of touch screens to download the latest driver and user s manual to insure proper operation and system compatibility The Touch screen driver software provi
7. sed to rain or water The display does not operate normally when the operating instructions are followed The display has been dropped or the cabinet damaged The display exhibits a distinct change in performance indicating a need for service Document No 150 VFP5 003 Rev A May 2004 Thank you for purchasing the Aydin Displays VECTOR Display This carton contains the items listed below VFP15 LCD Display Power cord 15 pin VGA HD15 to HD15 Video Cable Mounting hardware if applicable e Product CD containing This Users Guide Warranty Guide Touch Accessories if applicable Please check the carton and its content for damage that may have occurred during shipment Report any damage to the shipping agent immediately and do not operate the display if it appears to have been damaged All warranty returns must use the original shipping carton and packaging materials to prevent shipping damage Document No 150 VFP5 003 Rev A May 2004 DISPLAY ADJUSTMENTS If you have any problems connecting setting up or operating the display please refer to the Troubleshooting section of this guide Connect one end of the video cable to the HD15 connector on the rear of the display and the other end to the HD15 on the computer If a Touch Screen option has been provided connect the interface cable from the touch interface connector on the rear of the display to the proper RS232 Serial Controller
8. st accept any interference received including interference that may cause undesired operation Use the specified cables with the VFP15 display so as not to interfere with radio and television reception Use the supplied power cable or equivalent to ensure FCC compliance Use the shielded video cable Series VFP15 products have been tested and found to comply with the limits for Class A pursuant to part 15 of FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in strict accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Document No 150 VFP5 003 Rev A May 2004 A IEA A TO PREVENT FIRE OR SHOCK HAZARDS
9. v A May 2004 AUTO ADJUST Automatically adjusts the Image Position the Horizontal Size and Fine setting IMAGE CONTROLS LEFT RIGHT Controls Horizontal Image Position within the display area on the LCD UP DOWN Controls Vertical Image Position within the display area ofthe LCD H SIZE Adjusts the horizontal size by increasing or decreasing this setting FINE Improves focus clarity and image stability by increasing or decreasing this setting COLOR SETTING Five color presets select the desired color setting Color temperature increases or decreases in each preset NATIVE color presets cannot be changed NATIVE Original color displayed by the LCD panel that is unadjustable TOOLS LANGUAGE OSM control menus are available in seven languages OSM POSITION You can choose where you would like the OSM control window to appear on your screen Selecting OSM location allows you to manually adjust the position of the OSM control menu left right up or down OSM TURN OFF The OSM control menu time out is selectable from the following preset choices 10 20 30 45 60 and 120 seconds OSM LOCK OUT This control completely locks out access to all OSM control functions without Brightness and Contrast When attempting to activate OSM controls while in the Lock Out mode a screen will appear indicating the OSM controls are locked out To activate the OSM Lock Out function simultaneously press and hold the NEXT and butto
10. ventilation slots and openings or install the display in a place where ventilation may be hindered To protect from electrical shock unplug the display s power supply from the wall outlet before relocating Do not expose this display to direct sunlight or heat Hot air may cause damage to the cabinet and other parts This display should be operated from the type of power source indicated on the display s rating label Donotallow metal pieces or objects of any kind to fall into the display through the ventilation holes The inside of the fluorescent tube located within the LCD monitor contains mercury Please follow the bylaws or rules of your municipality to dispose of the tube properly Donotuse this display near water Do not place any heavy objects on the power cord Damage to the cord may cause shock or fire When operating the LCD monitor with its AC 220 240V power supply use a power cord that matches the power supply voltage ofthe AC outlet being used The power supply cord you use must have been approved by and comply with the safety standards of your country In UK use a BS approved power cord with molded plug having a black SA fuse installed for use with this monitor Unplug this display s power supply from the wall outlet and refer servicing to qualified service personnel in the event that Power cord or plug is damaged or frayed Liquid is spilled into the display or the display is expo
11. xt 640 x 480 60 75 Hz 800 X 600 56 75 Hz 832 x 624 75 Hz 1024 x 768 60 75 Hz Recommended resolution at 75 Hz for optimal performance Scanning Frequency Horizontal 31 5 to 60 kHz Vertical 50 to 75 1Hz View Angle Left Right 759 759 Up Down 55 65 User Controls On Screen Menu OSM Brightness Contrast Horizontal amp Vertical Position Width Focus and Reset Environmental Operating Temperature 5 C to 40 C Storage Temperature 10 C to 60 C Operating Humidity Non condensing 10 to 80 Storage Humidity Non condensing 10 to 85 Operating Altitude Oto 10 000 ft Storage Altitude 0 to 40 000 ft Shock 10G 11ms sine pulse Vibration 1G RMS 20 500Hz Power Supply Internal 100 120V AC 220 240V AC 50 60Hz Current Rating 0 4A 100 120VAC 0 2A 220 240VAC Document No 150 VFP5 003 Rev A May 2004 10 TROUBLESHOOTING NO PICTURE e Ifthe Amber NO SYNC LED is lit verify that the signal cable is properly connected to the display and computer e The Green ON LED should be lit IMAGE PERSISTENCE e Image persistence is when a ghost of an image remains on the screen even after the monitor has been turned off Unlike CRT monitor LCD monitors image persistence is not permanent To alleviate image persistence turn the monitor off for as long as an image was displayed If an image was on the monitor for one hour and a ghost of that image remains the monitor should be turned o
Download Pdf Manuals
Related Search