Home

JVC RX-8000V Receiver

image

Contents

1. INPUT ATT oo Ls S RS HEAD PHONE SLEEP VOLUME Vv Vv Vv 100 Vv ik 10k AA CILI THEATER LIVE CLUB DANCE CLUB HALL PAVILION DVD Select the DVD player DVD MULTI Select the DVD player for viewing the digital video disc using the analog discrete output mode 5 1CH reproduction on the DVD player To enjoy the DVD MULTI playback see page 31 CD Select the CD player TAPE MD Select the cassette deck or the MD recorder TV DBS Select TV sounds or the DBS tuner VIDEO Select video component connected to the VIDEO jacks PHONO Select the turntable FM AM Select an FM or AM broadcast e Each time you press the button the band alternates between FM and AM VCR 1 Select the video component connected to the VCR 1 jacks CDR VCR 2 Select the CD recorder or video component connected to the CDR VCR 2 jacks Notes When connecting an MD recorder to the TAPE MD jacks and a DBS tuner to the TV SOUND DBS jacks change the source name shown on the display For details see page 13 When you press one of the source selecting buttons on the remote control marked above with an asterisk the receiver automatically turns on Signal and speaker indicators on the display e The signal indicators light up to indicate the incoming channel signals Only the indicators for the incoming signals light up The frame of the signal indicator except for LFE and S
2. DO ocem R dts Foo ak toK vwe IG Current volume level is shown here To turn off the power into standby mode J feranosy press POWER again The STANDBY lamp lights up A small amount of power is consumed in standby mode To turn the power off completely unplug the AC power cord From the remote control To turn on the power press AUDIO POWER The STANDBY lamp goes off The name of the current source or station frequency appears on the display To turn off the power into standby mode press AUDIO POWER again The STANDBY lamp lights up Selecting the Source to Play On the front panel Turn SOURCE SELECTOR until the source 2 NS name you want appears on the display e As you turn the selector the source changes as follows Se CD Z PHONO Z TAPE or MD Z FM Z failed AM Z DVD Z DVD MULTI Z TVSOUNDIDBS PHONO TV SOUND or DBS Z VCR 1 Z oa CDR VCR 2 Z VIDEO Z back to the beginning ouie eS VIDEO AM The selected source lamp also lights up The DVD lamp lights up both for DVD and DVD MULTI 10 From the remote control Press one of the source selecting buttons DVD DVD MUILTI cD TAPE MD C TV DBS VIDEO PHONO FM AM VCR 1 CDR VCR 2 CI C Selected source name appears ANALOG LINEARPCM cH pge Jee PRO P IGITAL AUTO BASS BOOST DS ats SLEWFR LFE 3p PHoNIC
3. At Stereo operation 120 W per channel min RMS driven into 8 Q 20 Hz to 20 kHz with no more than 0 02 total harmonic distortion Front channels 120 W per channel min RMS driven into 4 Q 20 Hz to 20 kHz with no more than 0 08 total harmonic distortion At Surround operation Front channels 100 W per channel min RMS driven into 8 Q at 1 kHz with no more than 0 8 total harmonic distortion 100 W min RMS driven into 8 Q at 1 kHz with no more than 0 8 total harmonic distortion Center channel Rear channels 100 W per channel min RMS driven into 8 Q at 1 kHz with no more than 0 8 total harmonic distortion PHONO MM 2 5 mV 47 kQ CD TAPE MD TV SOUND DBS VCR 1 CDR VCR 2 VIDEO DVD 200 mV 47 KQ Coaxial DIGITAL 1 DVD 0 5 V p p 75 Q Optical DIGITAL 2 CD DIGITAL 3 TV DIGITAL 4 CDR 21 dBm to 15 dBm 660 nm 30 nm Corresponding to Linear PCM Dolby Digital and DTS Digital Surround with sampling frequency 32 kHz 44 1 kHz 48 kHz Audio Output Level Digital output Signal to Noise Ratio 66 IHF 78 IHF Frequency Response 8 Q RIAA Phono Equalization Bass boost SEA Video Video Input Sensitivity Impedance Composite video S video Video Output Level Composite video S video Synchronization Signal to Noise Ratio On Screen Color System TAPE MD VCR 1 CDR VCR 2 200 mV Optical DIGITAL OUTPUT Signal wave length 660 nm O
4. OPERATE Press A V to move to the item you want to set or adjust then press lt On these adjustment menus you can do the following For 3D PHONIC 3D ACTION 3D THEATER DSP EFFECT Select the effect level For DAP LIVE CLUB DANCE CLUB HALL PAVILION REAR L LEVEL Adjust the left rear speaker output level REAR R LEVEL Adjust the right rear speaker output level DSP EFFECT Select the effect level For Dolby Pro Logic TEST TONE Output a test tone CENTER LEVEL Adjust the center speaker output level REAR L LEVEL Adjust the left rear speaker output level REAR R LEVEL Adjust the right rear speaker output level CENTER TONE Select the center tone level For Dolby Digital and DTS Digital Surround TEST TONE Output a test tone CENTER LEVEL Adjust the center speaker output level REAR L LEVEL Adjust the left rear speaker output level REAR R LEVEL Adjust the right rear speaker output level CENTER TONE Select the center tone level For JVC Theater Surround TEST TONE Output a test tone CENTER LEVEL Adjust the center speaker output level REAR L LEVEL Adjust the left rear speaker output level REAR R LEVEL Adjust the right rear speaker output level CENTER TONE Select the center tone level DSP EFFECT Select the effect lev
5. lights up if the corresponding speaker is set to LARGE or SMALL for subwoofer YES The frames of L and R indicators always light up Lc JLR a C ss TI D LFE S G L When digital input is selected Lights up when the left channel signal comes in e When analog input is selected Always lights up R e When digital input is selected Lights up when the right channel signal comes in e When analog input is selected Always lights up C Lights up when the center channel signal comes in LS Lights up when the left rear channel signal comes in RS Lights up when the right rear channel signal comes in S Lights up when the monaural rear channel signal comes in LFE Lights up when the LFE channel signal comes in Notes e When SUBWOOFER is set to YES lights up e When you select DVD MULTI all the signal indicators except S light up Selecting different sources for picture and sound You can watch picture from a video component while listening to sound from another component On the front panel 1 Press SOUND SELECT INPUT ATT briefly while viewing the picture from a video component such as the VCR or DVD player etc SOUND SELECT appears on the display SOUND SELECT FAD SOURCE SELECTOR From the remote control Press one of the audio source selecting buttons CD TAPE MD PHONO FM A
6. to SETTING then press lt The SETTING 1 or SETTING 2 menu appears S E S F 0 R Cc R 03 x mHo Zz O Q a ooo D z lt mm KAAKA AK wMnDDAZS oo Dry ooro oomrm OPrarzow 4 N 2mzmmxac Qo mmrrovom lt D gt gt vuvUD QNonwrnr ym mo33 gt gt 0 i o ETIESE TET gt a x 3 Press A V to move to the item you want to set or adjust then press lt gt e To go to the SETTING 2 menu move F to NEXT PAGE then press lt e To go back to the SETTING 1 menu move C to PREVIOUS PAGE then press lt BO ENTER PREVIOUS PAGE x mo ENTER On the SETTING 1 and 2 menus you can do the following SUBWOOFER Set the subwoofer information see page 14 FRONT SPK Set the front speaker information see page 14 CENTER SPK Set the center speaker information see page 14 REAR SPK Set the rear speaker information see page 14 CNTR DELAY Adjust the delay time of the center speaker output see page 14 REAR DELAY Adjust the delay time of the rear speaker output see page 14 CROSSOVER Set the crossover frequency see page 15 36 4 LFE ATT Set the low frequency effect attenuator level see page 15 COMP Set the dynamic range compression see page 15 COAX IN Set the digital input terminal 1 see page 16 OPT IN Set the digi
7. Consult the dealer or an experienced radio TV technician for help To avoide risk of electric shock and fire and to protect from damage Locate the apparatus as follows Front No obstructions open spacing Sides No obstructions in 10 cm from the sides Top No obstructions in 10 cm from the top Back No obstructions in 15 cm from the back Bottom No obstructions place on the level surface In addition maintain the best possible air circulation as illustrated Spacing 15 cm or more RX 8000VBK Wall or obstructions Stand height 15 cm or more a Table of Contents Parts Identification cccceceeeeererereeeeeeeenees 2 Getting Started cccccceeereneeeeeeeeeeeereneeeeees 3 Before Installation sessccsccccscceevacsesseccsssssssncessansaacviessevevsteoseoteoncnne 3 Checking the Supplied Accessories 0 0 cece eects eeeeeeeeeeee 3 Connecting the FM and AM Antennas s ssesesseeseserererererereren 3 Connecting the Speakers seisan ei 4 Connecting Audio Video Components sssssesesseereereresessereenes 5 Connecting the Power Cordis asioi a 9 Putting Batteries in the Remote Control sesseesereeeereeereeee 9 Basic Operations cccceseeeeeeeeeeeeeeeenenenens 10 Turning the Power On and Off Standby 0 eee 10 Selecting the Source to Playor eee 10 Adj stne the Volume i sciss icosscsigceves sch cesauseasevacsese ceadevesieescsess 11 Selecting the Front Speakers wll M
8. little or CENTER SHARP2 much To make the dialogue softer select CENTER SOFT 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied 32 MEMO Use this column to write down your DVD MULTI playback mode adjustments for your future reference ie Using the On Screen Menus You can use the Menus on the TV screen to control the receiver To use this function you need to connect the TV to the MONITOR OUT jack on the rear panel see page 7 and set the TV s input mode to the proper position to which the receiver is connected e When the TV s input mode is incorrect for example a different video input or TV tuner mode is selected you cannot show the Menus on the TV screen On Screen Operation buttons on the remote control Selecting the Source to Play Also see page 10 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Shows the buttons you can use on the current menu and lt to select adjust or set the item In this case use A V to move CG up and down Notes e INPUT appears only when the digital input DIGITAL IN terminal setting have been correctly done for the digital source currently s
9. 2 Press SOUND The 10 keys are activated for sound adjustments 3 Press EFFECT to select an effect level you want e Each time you press the button the effect level changes as follows DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 DSP EFFECT 5 lt DSP EFFECT 4 _ As the number increases the selected 3D PHONIC mode becomes stronger Adjusting the DAP Modes Once you have adjusted the DAP modes the adjustment is memorized for each DAP mode EFFECT Before you start remember e Make sure that you have set the speaker information correctly see page 14 e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again e You cannot adjust the rear speaker output level when you have set REAR SPK to NONE See page 14 e When the DAP mode is used with the SEA mode see page 21 sounds may be distorted If this happens turn off the SEA mode On the front panel 1 Press DSP MODE repeatedly until the DAP mode LIVE CLUB DSP MODE DANCE CLUB HALL or PAVILION appears on the display The DSP indicator also lights up on the display e When you have set REAR SPK to NONE the 3D PHONIC indicator also lights up 2 Adjust the speaker output levels 1 Press BALANCE SURROUND ADJUST repeatedly until one of the indications appears on the display REAR L LEVEL To adjust the left rear speaker level REAR
10. appears On the SEARCH RESULT screen you can do the following e Changing the indication of the disc information Press A V to move C to a searched disc then press lt Each time you press lt the disc information alternates between its performer and its disc title Starting a disc play and going to the Disc Information screen see page 40 Press A V to move to a searched disc then press SET Showing unseen disc information if more than 5 discs are listed as a result of the search Press A V until they appear e Going back to the PERFORMER SEARCH screen Press EXIT Search for a disc by its disc title 1 Press TEXT DISPLAY while CD is selected as the source The Disc Information screen appears on the TV SOURCE CD DISC SEARCH Press A V to move to SEARCH then press SET The DISC SEARCH screen appears SET ENTER Xi BACK Press A V to move to DISC TITLE then press SET The DISC TITLE SEARCH screen appears JVC xx DISC TITLE SEARCH 8 Press A V lt 1 to move c in front of the first character of the disc title you want to search then press SET To correct the incorrect entry press A V lt to move C in front of the correct character then press SET Note Symbols such as or cannot be available for search SOURCE CD Press SET again ae SEARCA RESULT Disc search starts the
11. e As you turn it the display changes to show the following MULTI JOG Q p 7 CENTER SHARP1 gt CENTER SHARP2 CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT 2 To make the dialogue clearer select CENTER SHARP1 little or CENTER SHARP2 much To make the dialogue softer select CENTER SOFT 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied 27 JVC Theater Surround adjustments Before you start remember e Make sure that you have set the speaker information correctly see page 14 There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again You cannot adjust the rear speaker output levels when you have set REAR SPK to NONE See page 14 You cannot adjust the center speaker output level and center tone when you have set CENTER SPK to NONE See page 14 From the remote control 1 Press SURROUND MODE repeatedly until THEATER appears on the display Y The D0 PRO LOGIC and DSP indicators also light up on the display SURROUND SOUND 2 Press SOUND The 10 keys are activated for sound adjustments G a Press TEST to check the speaker output balance TEST TONE L starts flashing on the display and a test tone comes out of the speakers in the following order TEST TONE L_ TEST TONE C _ TEST TONE R L
12. 3 Insert the speaker signal cable 4 Turn the knob clockwise Connecting the front speakers You can connect two pairs of front speakers one pair to the FRONT SPEAKERS terminals and another pair to the FRONT SPEAKERS terminals Right speaker FRONT SPEAKERS Left speaker SPEAKER LOAD SELECTOR Right speaker FRONT SPEAKERS Left speaker IMPORTANT To obtain the best possible output power from the receiver and to prevent the receiver from being overheated the receiver has the SPEAKER LOAD SELECTOR which has to be set as follows e Set it to the HIGH position when the impedance of the front speakers connected is within the range of 8 ohms to 16 ohms Set it to the LOW position when the impedance of the front speakers connected is within the range of 4 ohms to 6 ohms Connecting the rear and center speakers Connect rear speakers to the REAR SPEAKERS terminals and a center speaker to the CENTER SPEAKER terminals CENTER REAR SPEAKER SPEAKERS RIGHT LEFT Center speaker Left rear speaker Right rear speaker Connecting the subwoofer speaker You can enhance the bass by connecting a subwoofer Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel using a cable with RCA pin plugs not supplied SUBWOOFER OUT Powered subwoofer Connecting Audio Video Components You can con
13. DSP OFF DSP mode is canceled By pressing SURROUND MODE SURROUND ON DOLBY PRO LOGIC DOLBY DIGITAL or DTS SURROUND e THEATER e LIVE CLUB e DANCE CLUB e HALL e PAVILION e 3D ACTION DSP OFF DSP mode is canceled To activate the Surround mode press SURROUND ON OFF button so that the lamp on the button lights up To activate the Surround mode you can also use the SURROUND ON OFF button Activated automatically only when AUTO PCM is selected as the digital input and playback source is encoded with Dolby Digital Activated automatically only when AUTO PCM is selected as the digital input and playback source is encoded with DTS Digital Surround Notes e If Surround mode is canceled while playing back a multichannel source such as Dolby Digital and DTS Digital Surround all channel signals are mixed with left and right front channel and are output through the front speakers While playing back a multichannel source such as Dolby Digital and DTS Digital Surround Theater Surround DAP modes and 3D PHONIC modes cannot be used On the other hands if you select a Dolby Digital and DTS Digital Surround as the source to play while using any of Theater Surround DAP modes and 3D PHONIC modes the currently selected mode will be canceled and Dolby Digital or DTS Digital Surround mode will be activated 24 IMPORTANT When using the remote control
14. check to see if its remote control mode selector is set to the correct position To operate this receiver set it to AUDIO TV VCR AUDIO ee apa Adjusting the 3D PHONIC Modes Once you have adjusted the 3D PHONIC modes the adjustment is memorized for each 3D PHONIC mode Before you start remember e Make sure that you have set the speaker information correctly see page 14 e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel 1 Press DSP MODE repeatedly until 3D ACTION or 3D THEATER appears on the display The 3D PHONIC DSP and D0 PRO LOGIC indicators also light up on the display DSP MODE S Adjust the effect level 1 Press BALANCE SURROUND ADJUST repeatedly until DSP EFFECT appears on the display The display changes to show the current setting 2 Turn MULTI JOG to select the effect level e As you turn it the effect level changes as follows SURROUND ADJUST MULTI JOG DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 7 DSP EFFECT 5 DSP EFFECT 4 As the number increases the selected 3D PHONIC mode becomes stronger From the remote control 1 Press SURROUND MODE SURROUND repeatedly until 3D ACTION or lt 3D THEATER appears on the display The 3D PHONIC DSP and DU PRO LOGIC indicators also light up on the display SOUND
15. then press lt The SOUND CONTROL menu appears 1 Press A V to move to INPUT ATT Press lt gt to turn the Input Attenuator mode ATT ON or NORMAL When you finish press EXIT repeatedly until the menu disappears from the TV 34 SOUND CONTROL SURROUND LEVEL SEA OPERATE I Adjusting the Subwoofer Output Level Also see page 12 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt 1 buttons also displays the MAIN MENU Press A V to move to SOUND CONTROL then press lt The SOUND CONTROL menu appears Press A V to move T SOUND CONTROL to SUBWFR LEVEL pe LEVEL Press lt gt to adjust 8 the subwoofer output level Gs mig OPERATE When you finish press EXIT repeatedly until the menu disappears from the TV Hl Adjusting the DSP Modes Also see pages 25 29 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Press A V to move to MODE Press lt gt to select the DSP mode you want to adjust e In this example THEATER is selected OPERATE VOLUME 2 Onl Press A V to move to SOUND CONTROL then press lt The SOUND CONTROL menu appears Press A V to move to SURROUND LEVEL then press lt gt The SURROUND LEVEL menu appears
16. to move to DISC 1 MY FAVORITE in this example then press SET The TITLE INPUT DISC 1 GENRE screen appears O00F gt S HRISTIAN GED ENTER Ex BACK D DU ET HI LA ON U 8 Press A V to move to the genre you want then press SET The Disc Information screen appears again To show the unseen genres press A V until they appear For the MD recorder You can write the disc information disc title and song titles into the disc You can only write the song title for the song currently selected If you have the CD MD combination deck you can also enter the disc information its performer disc title and its music genre of normal audio CDs into the memory built in the CD MD combination deck To do this follow the procedure of For the CD Player with the disc memory function to the left e If you change the disc or song title with more than 32 characters the characters following 32nd will be erased from the title 1 Press TEXT DISPLAY while MD is selected as the source The Disc Information screen appears on the TV 2 Press A V to move SOURCE MD to TITLE INPUT g then press SET matt TRACK The DISC TITLE INPUT Taage screen appears 3 Enter the title referring to steps 3 and 4 of For the CD Player with the disc memory function to the left e You can enter up to 32 A characters for the disc title SE ENTER BACK
17. wo lt ZO4 O07 4 Press A V lt 1 gt to move c to the disc title you have just entered then press SET The disc title is stored into the memory and the SONG TITLE INPUT screen for the currently selected song appears e You can enter a song title for the song currently selected indicated in yellow on the TV screen SOURCE tt C TRACK Srp P XZW o lt ZO Q 1 NO E 5 Enter the song title referring to steps 3 and 4 of For the CD Player with the disc memory function to the left e You can enter up to 32 characters for the song title 6 Press A V lt 1 gt to move c to the song title you have just entered then press SET The song title is stored into the memory and the Disc Information screen appears again 43 ee AV COMPU LINK Remote Control System The AV COMPU LINK remote control system allows you to operate JVC video components TV VCR and DVD player through the receiver To use this remote control system you need to connect the video components you want to operate following the diagrams below and the procedure on the next page CONNECTIONS 1 DVD player oo i o La UNK If the AV COMPU LINK terminal on the TV is RECEIVER AMP r RECEIVER AMP TV CAUTION The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV A SOUND DBS jacks and video components connected to the VIDEO and CDR VC
18. C CENTER 0 lt S 5 8 0 0 0 CNTRTONE ON OFF woo 44 C gt q 2e QE we 6 3 3 3 8 2 z 3 z A 2 2 5 Je Ws a F g a l 2 a i H AUDIO Ten Stvol Check to see if the remote control mode selector is set to the correct position To operate the audio system TVs VCRs and DVD players set it to CONTROL L DOWN TUNING UP O AUDIO TV VCR MBR RM SRX8000J REMOTE CONTROL VCR 1 VCR connected to the VCR 1 jacks You can always perform the following operations with the remote control mode selector set to AUDIO TV VCR VCR 1 POWER Turns on or off the VCR 1 After pressing VCR 1 or VCR 1 CONTROL with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on the VCR 1 9 0 Selects the TV channels on VCR PLAY Starts playing lt lt Rewinds a tape gt Fast winds a tape STOP Stops operations PAUSE Pauses playing To release it press PLAY REC Press this button with the PLAY button to start recording Press this button with the PAUSE button to enter recording pause CHANNEL Changes the TV channels on the VCR Note You can use either VCR 1 button or the VCR 1 CONTROL button to activate the buttons listed above If you press VCR 1 the playing source also changes On the other hanad if you press VCR 1 CON
19. CENTER 4 4 NOP a 14 5 surowo TEST REARL 5 sa Ca 5 consc emer a 5 6 OMO 7 SOUND ff sEAMODE _ SUBWOOFERE 3 7 L8 RETURN FMMODE 100 lt a ACR 9 frenu avos 16 0 8 Sy Von YE i 11 18 12 9 TVVOL CHANNEL VOLUME 19 B 14 a 5 CONTROL T ED DOWN TUNING UP i 17 18 mir 19 20 RM SRXB000J REMOTE CONTROL TV POWER button 48 49 CATV DBS POWER button 50 Source selecting buttons 10 DVD DVD MULTI CD TAPE MD TV DBS VIDEO PHONO FM AM VCR 1 CDR VCR 2 SURROUND ON OFF button 26 29 SURROUND MODE button 25 CD DISC button 47 SOUND button 21 25 32 On screen operation buttons 33 40 MENU SET EXIT A V lt gt TV VOL buttons 48 49 Operating buttons for audio video components 46 48 51 AUDIO POWER buttons 10 VCR 1 POWER button 48 51 SLEEP button 18 ANALOG DIGITAL button 17 e 10 keys for selecting preset channels 20 e 10 keys for adjusting sound 21 25 28 32 e 10 keys for operating audio video components 46 51 Remote control mode selector 10 46 49 07 TEXT DISPLAY button 40 18 CHANNEL button 48 51 VOLUME button 11 MUTING button 12 Front Panel 1 2 3 4 5 6 i 8 9 0 1 2 3 4 N S a 2
20. DBS tuner D To composite video output m Seen eee To S video output Note When connecting the DBS tuner to the TV SOUND DBS jacks change the source name which will be shown on the display when selected as the source to DBS See page 13 for details To subwoofer audio output To S video output To front left right channel audio output To rear left right channel audio output TY IM JO JO 0 gt To composite video output Digital connections This receiver is equipped with four DIGITAL IN terminals one digital coaxial terminal and three digital optical terminals and one DIGITAL OUT terminal You can connect any digital equipment such as e DBS tuner e Digital TV broadcast tuner e DVD player e CD player e CD recorder and e MD recorder IMPORTANT When connecting the DVD player digital TV broadcast tuner or DBS tuner using the digital terminals you also need to connect it to the video jack either composite video terminal or S video terminal on the rear Without connecting it to the video jack you can view no playback picture After connecting the components using the DIGITAL IN terminals set the following correctly if necessary Set the digital input DIGITAL IN terminal setting correctly For details see Digital Input DIGITAL IN Terminal Setting on page 16 Select the digital input
21. DVD MULTI appears on the display SOURCE SELECTOR Note When you select DVD MULTI as the source to play the DSP mode is canceled temporarily and the SURROUND ON OFF and DSP MODE buttons do not work Select the analog discrete output mode on the DVD player and start playing a DVD e Refer to the manual supplied with the DVD player If you need to make any adjustment go to the following steps 3 Adjust the speaker output levels 1 Press BALANCE SURROUND ADJUST repeatedly until one of the indications appears on the display CENTER LEVEL To adjust the center speaker level REAR L LEVEL To adjust the left rear speaker level REAR R LEVEL To adjust the right rear speaker level mumos 2 Turn MULTI JOG to adjust the Q SURROUND ADJUST selected speaker output level from 10 dB to 10 dB 3 Repeat 1 and 2 to adjust the other speaker output levels 4 Adjust the center tone 1 Press BALANCE SURROUND ADJUST repeatedly until CENTER TONE appears on the display The display changes to show the current setting 2 Turn MULTI JOG to select the center PE tone level you want N The center tone adjustment affects the mid frequency range which the human voice is mostly made up of e As you turn it the display changes to show the following p CENTER SHARP1 gt CENTER SHARP2 CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT 2 To make the dial
22. OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF k k k kkk JVG LIMITED WARRANTY aunio 2 JVC COMPANY OF AMERICA warrants this product and all parts thereof except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below The Warranty Period PARTS LABOR 2YR 2YR THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO WHAT WE WILL DO If this product is found to be defective JVC will repair or replace defective parts at no charge to the original owner Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers Parts used for replacement are warranted only for the remainder of the Warranty Period All products and parts thereof may be brought to a JVC authorized service center on a carry in basis except for Television sets having a screen size 25 inches and above which are covered on an in home basis WHAT YOU MUST DO FOR WARRANTY SERVICE Return your product to a JVC authorized service center with a copy of your bill of sale For your nearest JVC authorized service center please call toll free 800 537 5722 If service is not available locally box the product carefully preferably in the original carton and ship in
23. Q COAXIAL AM loop Outdoor single vinyl covered wire Turn the loop until you have the best reception Notes e Make sure the antenna conductors do not touch any other terminals connecting cords and power cord This could cause poor reception If reception is poor connect an outdoor single vinyl covered wire to the AM EXT terminal Keep the AM loop antenna connected Connecting the Speakers You can connect the following speakers Two pairs of front speakers to produce normal stereo sound One pair of rear speakers to enjoy the surround effect One center speaker to produce more effective surround effect to emphasize human voices One subwoofer to enhance the bass IMPORTANT After connecting the speakers listed above set the speaker setting information properly to obtain the best possible DSP effect For details see page 14 For each speaker except for a subwoofer connect the and terminals on the rear panel to the and terminals marked on the speakers For connecting a subwoofer see page 5 CAUTION Use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals D Basic connecting procedure 1 2 3 4 1 Cut twist and remove the insulation at the end of each speaker signal cable not supplied 2 Turn the knob counterclockwise
24. R LEVEL To adjust the right rear speaker level 2 Turn MULTI JOG to adjust the selected speaker output level from 10 dB to 10 dB 3 Repeat 1 and 2 to adjust the other speaker output level SURROUND ADJUST MULTIJOG Q 25 3 SURROUND ADJUST Adjust the effect level 1 Press BALANCE SURROUND ADJUST repeatedly until DSP EFFECT appears on the display The display changes to show the current setting atis 2 Turn MULTI JOG to select the effect ER level e As you turn it the effect level changes as follows i DSP EFFECT 1 lt DSP EFFECT 2 DSP EFFECT 3 7 DSP EFFECT 5 DSP EFFECT 4 As the number increases the selected DAP mode becomes stronger From the remote control 1 Press SURROUND MODE SURROUND repeatedly until the DAP mode LIVE CLUB DANCE CLUB o HALL or PAVILION appears on the display The DSP indicator also lights up on the display e When you have set REAR SPK to NONE the 3D PHONIC indicator also lights up SOUND O REAR L Press SOUND The 10 keys are activated for sound adjustments Adjust the speaker output levels To adjust the left rear speaker level press REAR L from 10 dB to 10 dB e To adjust the right rear speaker level press REAR R from 10 dB to 10 dB REARR Press EFFECT to select an effect en level you want e Each time you press the button the effect level changes a
25. Remote Control System 38 TEXT COMPU LINK Remote Control System 39 E Showing the Disc Information on the TV Screen 40 E Searching for a Disc Only for the CD player Al Entering the Disc Information sessirnir 42 AV COMPU LINK Remote Control System 44 Operating JVC s Audio Video Components 46 Operating Audio Component cc ceceeeeseeeeseeeeeeeseteseeeeeaeees 46 Operating Video Components ccececeeeceeeseeseeseeteeneeeeeees 48 Operating Other Manufacturers Video Equipment 2cccceceeeeeeeeeeeeeeeeeeeeeeeeeeees 49 Troubleshooting 2 cseceeeeeeeeeeeeeeeeeeeeeees 52 Specifications 2 0ccceeseeeeeeeeeeeeeeeeeeeeeeeeeee 53 a Parts Identification Become familiar with the buttons and controls on the receiver before use Refer to the pages in parentheses for details JVC STANDBY RX 8000V AUD MASTER VOLUME SPEAKERS 2 SEA ADJUST SETTING L AUDIO R wv SVIDEO VIDEO Ee J le Felice Remote Control 5 te 7 T 2 I T2 2 DVD DVD MUILTI CD TAPEMD 3 TVBS VIDEO PHONO FMAM 3 vor1 conven ANALOGDIGITAL SLEEP 3 M CNTRTONE
26. SMALL for the front speaker setting you cannot select LARGE for the center and rear speaker settings Center Delay Time Setting Register the delay time of the sound from the center speaker comparing to that of the sound from the front speakers If the distance from your listening point to the center speaker is equal to that to the front speakers select 0 msec As the distance to the center speaker becomes shorter increase the delay time e msec increase or decrease in delay time corresponds to 11 16 inches 30 cm decrease or increase in distance e When shipped from the factory delay time is set to 0 msec On the front panel ONLY 1 Press SETTING repeatedly until CENTER DELAY appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select the delay time of the center speaker output e Turn it clockwise to increase the delay time from 0 msec C DELAY 0ms to 5 msec C DELAY 5ms e Turn it counterclockwise to decrease the delay time from 5 msec C DELAY 5ms to 0 msec C DELAY 0ms Notes e Center delay time setting is not valid for the DVD MULTI playback mode e You cannot adjust the center delay time when you have set CENTER SPK to NONE Rear Delay Time Setting Register the delay time of the sound from the rear speakers comparing to that of the sound from the front speakers If the d
27. To check or change the time remaining until the shut off time Press SLEEP once The remaining time until the shut off time appears in minutes e To change the shut off time press SLEEP repeatedly To cancel the Sleep Timer Press SLEEP repeatedly until SLEEP 00min appears on the display The SLEEP indicator goes off e Turning off the power also cancels the Sleep Timer fed Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station IMPORTANT When using the remote control check to see if its remote control mode selector is set to the correct TNC position r To operate this receiver set it to AUDIO TV CATVIDBS VCR Tuning in Stations Manually On the front panel 1 Turn SOURCE SELECTOR to select the band FM or AM The last received station of the selected band is tuned in SOURCE SELECTOR ANALOG LINEAR PCM Do ocra R dts FM AM TUNING mS MULTI JOG 2 Press FM AM TUNING 3 Turn MULTI JOG until you find the frequency you want e Turning it clockwise increases the frequency e Turning it counterclockwise decreases the frequency e When you turn MULTI JOG quickly the frequency keeps changing until a station is tuned in From the remote control 1 Press FM AM to select the band e Each time you press the button the band altern
28. Your adjustment is stored into the SEA USERMODE ANALOG LINEAR PCM Do oca R dts To recall your own SEA adjustment Press SEA MODE repeatedly until SEA USERMODE appears To erase a stored adjustment Storing a new adjustment into SEA USERMODE erases the previously stored one 21 I Using the DSP Modes The built in Surround Processor provides three types of the DSP Digital Signal Processor mode 3D PHONIC made DAP Digital Acoustic Processor mode and Surround made 3D PHONIC modes The 3D PHONIC mode gives you such a nearly surround effect as is reproduced through the Dolby Surround decoder which is widely used to reproduce sounds with a feeling of movement like those experienced in movie theaters The 3D PHONIC mode is the result of research on sound localization technology carried out at JVC for many years This mode can be used when the front speakers are connected to this receiver without respect to the rear center speaker connection 3D ACTION Best for action and war movies where the action is fast and explosive 3D THEATER Reproduces the sound field of a large theater This mode can be selected when only front speakers are connected to this receiver and REAR SPK and CENTER SPK are set to NONE see page 14 22 DAP modes The sound heard in a concert hall or club consi
29. appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION To reduce the risk of electrical shocks fire etc 1 Do not remove screws covers or cabinet 2 Do not expose this appliance to rain or moisture Caution Proper Ventilation Match the position of SPEAKER LOAD SELECTOR switch on the back panel to the impedance of the speaker connected to protect from overheating For U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
30. audio input output jacks on VCR 1 DVD player TV and this receiver using the cables with RCA pin plug e See pages 6 and 7 4 Connect the video input output jacks on VCR 1 DVD player TV and this receiver using the cables with RCA pin plug or with S video plug e See CONNECTIONS 2 on the previous page 5 Plug the AC power cords of the components into the AC outlets 6 When turning on the TV for the first time after the AV COMPU LINK connection turn the TV volume to the minimum using the TV volume control on the TV 7 Turn on the other connected components first then turn on this receiver e When turning on the VCR 1 use the remote control supplied with this receiver press VCR 1 POWER The AV COMPU LINK remote control system allows you to use the five basic functions listed below E Remote Control of the TV DVD player and VCR Using This Remote Control See page 48 for details For the DVD player and the VCR e Aim the remote control directly at the remote sensor on each component For the TV having AV COMPU LINK terminal RECEIVER AMP e Aim the remote control directly at the remote sensor on the receiver For the TV having AV COMPU LINK terminal AV COMPU LINK EX e Aim the remote control directly at the remote sensor on the TV Jf One Touch Video Play Simply by inserting a video cassette without its safety tab into the VCR 1 the VCR connected to the VCR 1 jacks you can
31. can use either one If it has only one COMPU LINK jack connect it so that it is the last item in the series of components For example the turntable or CD player in the diagram above e To operate the cassette deck or MD recorder using the COMPU LINK remote control system set the source name correctly See page 13 Refer also to the manuals supplied with your audio components This remote control system allows you to use four functions listed below Remote Control through the Remote Sensor on the Receiver You can control the connected audio components through the remote sensor on the receiver using this remote control Aim the remote control directly at the remote sensor on the receiver For details see pages 46 and 47 Automatic Source Selection When you press the play gt button on a connected component or on its own remote control the receiver automatically turns on and changes the source to the component On the other hand if you select a new source on the receiver or on the remote control the selected component begins playing immediately In both cases the previously selected source continues playing without sound for a few seconds 38 Automatic Power On Off Standby only possible with the COMPU LINK 3 and COMPU LINK 4 connection The connected components turn on and off standby along with the receiver When you turn on the receiver one of the connected component will turn on automatical
32. change SURROUND D 2 Select and play a sound source e To enjoy 3D PHONIC and JVC Theater Surround play back a software encoded with Dolby Surround and labeled with DO potey surround mark To cancel the DSP mode Press SURROUND MODE repeatedly until DSP OFF appears on the display SURROUND G 30 Using the DVD MULTI Playback Mode This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player Before playing back a DVD refer also to the manual supplied with the DVD player IMPORTANT When using the remote control check to see if its remote control mode selector is set to the correct AUDIO ne TV VCR position To operate this receiver set it to AUDIO TV cipal VCR Activating the DVD MULTI Playback Mode You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player Once you have made adjustments the receiver memorizes the adjustments until you change them You also need to set the DVD player to the analog discrete output mode Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel 1 Turn SOURCE SELECTOR until
33. details see page 16 When you finish press EXIT The menu disappears from the TV 33 I Adjusting the Front Speaker Output Balance Also see page 13 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt 1 buttons also displays the MAIN MENU Press A V to move to SOUND CONTROL then press lt The SOUND CONTROL menu appears 1 1 Press A V to move to BAL Balance SOUND CONTROL xx SURROUND LEVEL SEA Press lt gt to adjust the balance mcg OPERATE 5 When you finish press EXIT repeatedly until the menu disappears from the TV 5 lau Reinforcing the Bass Also see page 12 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Press A V to move to SOUND 2 CONTROL then press lt 3 The SOUND CONTROL menu appears i 1 1 Press A V to move to BASS BOOST SOUND CONTROL x SURROUND LEVEL SEA x x B B a Press lt to turn the bass boost function ON or OFE When you finish press EXIT repeatedly until the menu disappears from the TV fi OPERATE S H Attenuating the Input Signal Also see page 12 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Press A V to move to SOUND CONTROL
34. enjoy the video playback without setting other switches manually The receiver automatically turns on and changes the source to VCR 1 The TV automatically turns on and changes the input mode to the position so that you can view the playback picture When you insert a video cassette with its safety tab press the play button on the VCR 1 or on the remote control So you can get the same result J One Touch DVD Play Simply by starting playback on the DVD player you can enjoy the DVD playback without setting other switches manually e When the DVD player is connected through the analog input jacks on this receiver and analog input is selected the receiver automatically turns on and changes the source to DVD or DVD MULTI When the DVD player is connected through the digital input terminal on this receiver and digital input is selected the receiver automatically turns on and changes the source to DVD DIGITAL The TV automatically turns on and changes the input mode to the position so that you can view the playback picture i Automatic Selection of TV s Input Mode e When you select TV SOUND or TV DIGITAL as the source to play on the receiver the TV automatically changes the input mode to the TV tuner so that you can watch TV When you select CDR VCR 2 as the source to play on the receiver the TV automatically changes the input mode to the Video Input 2 so that you ca
35. format records the left front channel right front channel center channel and rear channel total 4 channels signals into 2 channels The Doby Pro Logic decoder built in this receiver decode these 2 channel signals into original 4 channel signals matrix based multichannel reproduction and allows you to enjoy the realistic stereo sounds in your listening room On the other hand Dolby Digital encoding method so called a discrete 5 1 channel digital audio format records and compresses the left front channel right front channel center channel left rear channel right rear channel and LFE channel total 6 channels but LFE channel is counted as 0 1 channel therefore called 5 1 channels signals digitally Each channel is completely independent from other channel signals to avoid interference therefore you can obtain much better sound quality with much stereo and surround effects The Dolby Digital decoder built in this receiver can create much more realistic sound field in your listening room You may feel as if you were in a real theater In addition Dolby Digital enables stereo rear sounds and sets the cutoff frequency of the rear treble at 20 kHz comparing to 7 kHz for Dolby Pro Logic These facts enhance the sound movement and being there feelings much more than Dolby Pro Logic e To enjoy the software encoded with Dolby Digital you must connect the source component using the digital terminal on the rear of this receiver See pag
36. front panel 2 Select and play a sound source e To enjoy Dolby Pro Logic play back a software encoded with Dolby Surround and labeled with DU botsysurrouno mark e To enjoy Dolby Digital play back a software encoded with Dolby Digital and labeled with DO mark e To enjoy DTS Digital Surround play back a software encoded with DTS Digital Surround and labeled with FEM mark To cancel the Dolby DTS Surround mode Press SURROUND ON OFF again so that the lamp on the front panel button goes off SURROUND OFF appears on the display SURROUND ON OFF 5 On the front panel SURROUND On the remote control 29 For the other DSP modes On the front panel 1 Press DSP MODE repeatedly until the mode you want appears on the display DSP MODE MEMO Use this column to write down your DSP mode adjustments for your future reference a e Each time you press the button the DSP modes change See page 24 for more details 2 Select and play a sound source e To enjoy 3D PHONIC and JVC Theater Surround play back a software encoded with Dolby Surround and labeled with DO povey surround mark To cancel the DSP mode Press DSP MODE repeatedly until DSP OFF appears on the display DSP MODE 3 From the remote control 1 Press SURROUND MODE repeatedly until the DSP mode you want appears on the display e Each time you press the button the DSP modes
37. in the following order TEST TONE L_ TEST TONE C _ TEST TONE R Left front speaker Center speaker Right front speaker TEST TONE LS TEST TONE RS Left rear speaker Right rear speaker 4 Notes e You can adjust the speaker output levels without outputting the test tone e No test tone comes out of the center speaker when CENTER SPK is set to NONE see page 14 e No test tone comes out of the rear speakers when REAR SPK is set to NONE see page 14 e Ifthe TV is turned on and the proper video input is selected on the TV the test tone screen will appear on the TV Adjust the speaker output levels To adjust the center speaker level press CENTER from 10 dB to 10 dB To adjust the left rear speaker level press REARe L from 10 dB to 10 dB To adjust the right rear speaker level press REAReR from 10 dB to 10 dB CENTER REARL REAR R Press TEST again to stop the test tone Qs Press CNTR TONE to select the CNTR TONE center tone level you want The center tone adjustment affects the mid frequency range which the human voice is mostly made up of e Each time you press the button the display changes to show the following CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT 2 To make the dialogue clearer select CENTER SHARP1 little or CENTER SHARP2 much To make the dialogue softer select CENTER SOF
38. its assigned name will appear on the display Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again e You can use the following characters Space _ A Z and 0 9 On the front panel ONLY 1 Tune in a preset station See the left TUNER MEMORY SS e If you turn MULTI JOG while the preset channel number is flashing you can change the preset channel number 2 Press TUNER SEA MEMORY The preset channel number starts flashing for about 10 seconds TUNED STEREO CH TUNER PRESET 3 Press TUNER PRESET while the preset channel number is flashing The first character position starts flashing TUNED STEREO CH ee ee MULTI JOG Q TUNER PRESET 4 Turn MULTI JOG to select the first character while the first character position is flashing an d p ana 5 Press TUNER PRESET while a character you want is flashing The next character position starts flashing TUNED STEREO 6 Repeat steps 4 and 5 to enter up to four characters TUNER MEMORY s gt Insert spaces using the same procedure described above 7 Press TUNER SEA MEMORY while the last selected character is flashing after you have assigned a name To erase the input characters I Using the SEA Modes The SEA Sound Effect Amplifier modes give you control of the way your music sounds IMPO
39. kHz to 1 710 kHz Loop antenna 400 uV m 50 dB 100 mV m AC 120V v 60 Hz 320 watts 420 VA at operation 2 watts in standby mode 435 mm x 157 mm x 412 5 mm 17 i6 in x 6 3 16 in x 16 4 in 11 9 kg 26 3 Ibs Designs amp specifications are subject to change without notice QUALITY JVC SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE 1 800 537 5722 http www jvcservice com Dear customer In order to receive the most satisfaction from your purchase read the instruction booklet before operating the unit In the event that repair is necessary or for the address nearest your location please refer to the factory service center list below or within the Continental United States Call 1 800 537 5722 for your authorized servicer Remember to retain your Bill of Sale for Warranty Service JVC JVC SERVICE amp ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP FACTORY SERVICE CENTER LOCATIONS 10 New Maple Avenue 1500 Lakes Parkway 705 Enterprise Street Pine Brook NJ 07058 9641 Lawrenceville GA 30243 5857 Aurora IL 60504 8149 973 396 1000 770 339 2582 630 851 7855 5665 Corporate Avenue 2969 Mapunapuna Place 10700 Hammerly Suite 110 Cypress CA 90630 0024 Honolulu HI 96819 2040 Houston TX 77043 714 229 8011 808 833 5828 713 935 9331 13 Cummings Park 8192 State Road 84 890 Dubuque Avenue Woburn MA 01801 Davie FL 33324 South San Francisco CA 94080 1804 7
40. the incoming signal format correctly the frame of the digital signal indicator flashes If this happens select the same digital input mode with the incoming digital signal either DOLBY DIGITAL or DTS To change the input mode back to analog input select ANALOG From the remote control 1 Press the source selecting button w co TAPEMD CD TAPE MD TV DBS DVD 2 gt or CDR VCR2 for which you want to change the input mode Among the sources listed above you can select the digital input only for the sources which you have selected the digital input terminals for See Digital Input DIGITAL IN Terminal Setting 2 Press ANALOG DIGITAL to change the input mode e Each time you press the button the input mode changes as follows C ANALOG AUTOIECM PE DTS ar EN P Digital Digita ANALOG DIGITAL Notes e Noise may come out of the speakers while searching or skipping a multi sound source encoded with Dolby Digital or DTS Digital Surround If this happens select DOLBY DIGITAL or DTS for digital input mode e When you change the source the digital input mode will be automatically reset to AUTO PCM Showing the Text Information on the Display When you have connected an MD recorder or CD player equipped with TEXT COMPU LINK remote control system see page 39 you can show the text information such as disc title or track title on the display of t
41. 0 21 22 23 24 POWER button and STANDBY lamp 10 Remote sensor 9 SURROUND ON OFF button and lamp 27 29 SEA MODE button 21 INPUT ANALOG DIGITAL button 17 FM AM TUNING button 19 FM MODE button 20 Display 10 Source lamps 10 MASTER VOLUME control 11 PHONES jack 12 SPEAKERS 1 2 buttons and lamps 11 DSP MODE button 25 BALANCE SURROUND ADJUST button 12 13 25 SEA ADJUST button 21 SETTING button 14 17 TUNER SEA MEMORY button 19 21 SOUND SELECT INPUT ATT button 11 12 BASS BOOST SOURCE NAME button 12 13 ONE TOUCH OPERATION button and lamp 18 TUNER PRESET button 20 MULTI JOG control What this control actually does depends on which function you are trying to adjust Before using this control select the function by pressing one of the buttons marked with SOURCE SELECTOR control 10 VIDEO input jacks 7 a Getting Started This section explains how to connect audio video components and speakers to the receiver and how to connect the power supply Before Installation General e Be sure your hands are dry e Turn the power off to all components e Read the manuals supplied with the components you are going to connect Locations e Install the receiver in a location that is level and protected from moisture e The temperature around the receiver must be between 5 C and 35 C 23 F an
42. 5 e For channel number 20 press 10 then 10 e For channel number 30 press 10 10 then 10 Note When you use the 10 keys on the remote control be sure that they are activated for the tuner not for the CD and others See page 46 Selecting the FM Reception Mode When an FM stereo broadcast is hard to receive or noisy You can change the FM reception mode while receiving an FM broadcast e You can store the FM reception mode for each preset station Press FM MODE on the front panel or on the remote control e Each time you press the button the FM reception mode alternates between AUTO MUTING and MONO FM MODE FM MODE On the remote control On the front panel AUTO MUTING When a program is broadcasted in stereo you will hear stereo sound when in monaural you will hear monaural sounds This mode is also useful to suppress static noise between stations The AUTO MUTING indicator lights up on the display MONO Reception will be improved although you will lose the stereo effect In this mode you will hear noise while tuning into the stations The AUTO MUTING indicator goes off on the display 20 Note When using the FM MODE button on the remote control be sure that the 10 keys are activated for the tuner not for the CD and others See page 46 Assigning Names to Preset Stations You can assign a name of up to four characters to each preset station When a preset station is tuned in
43. 81 376 9100 954 472 1960 650 871 2666 Sophisticated electronic products may require occasional service Just as quality is a keyword in the engineering and production of the wide array of JVC products service is the key to maintaining the high level of performance for which JVC is world famous The JVC service and engineering organization stands behind our products NATIONAL HEADQUARTERS JVC SERVICE amp ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP 1700 Valley Road Wayne NJ 07470 If you ship the product Don t service it yourself Pack your JVC unit in the original carton or one of equivalent size and strength Enclose with the unit a letter stating the CAUTION problem or symptom that exists and also a copy of the receiptor billof sale you received when you purchased your To prevent electrical shock do not open the cabinet No user JVC unit Print your home return address on the outside serviceable parts inside and the inside of the carton Send to the appropriate JVC Refer servicing to qualified service personnel Factory Service Center as listed above ACCESSORIES To purchase accessories for your JVC product you may contact your local JVC Dealer Or from the 48 Continental United States call toll free 800 882 2345 1099 OF OF F OF F OF F OF OF OF OF OF OF OF F OF F OF OF OF F OF F OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF
44. APE MD and TV SOUND DBS but not to CDR VCR 2 e Without changing the source name you can still use the connected components However there may be some inconvenience TAPE or TV SOUND will appear on the display when you select the MD recorder or DBS tuner You cannot use the digital input see page 16 for the MD recorder You cannot use the COMPU LINK remote control system see page 38 to operate the MD recorder 13 Setting the Subwoofer Information Register whether or not you have connected a subwoofer Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel 1 Press SETTING repeatedly until SUBWOOFER appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to register whether you have connected a subwoofer or not e As you turn it the subwoofer setting alternates between YES and NO YES Select this when a subwoofer is used lights up on the display see page 11 NO Select this when no subwoofer is used Setting the Speakers for the DSP Modes To obtain the best possible surround sound of the DSP modes you have to register the information about the speakers arrangement after all connections are completed Before you start remember e There is a time limit in doing the fo
45. D CONTROL then press lt The SOUND CONTROL menu appears 3 Press A V to move to SEA then press lt ic The SEA menu appears 4 Press A V to move i A c to SEA MODE GIG OPERATE 5 Press lt gt to select the SEA mode you want 6 When you finish press EXIT repeatedly until the menu disappears from the TV E Creating Your Own SEA Mode Also see page 21 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt 1 buttons also displays the MAIN MENU 2 Press A V to move to SOUND CONTROL then press lt The SOUND CONTROL menu appears 3 Press A V to move to SEA then press lt gt The SEA menu appears 35 4 Press A V to move to SEA ADJUST The SEA ADJUST menu appears 5 Press A V lt 1 gt to adjust the SEA mode as you want lt D Select the frequency ranges A V Adjust the frequency levels 6 Press SET to store the setting into the SEA USERMODE e If you press EXIT without pressing SET in this step you can return to the SEA menu The adjustment you have made is active but not stored 7 When you finish press EXIT repeatedly until the menu disappears from the TV I Setting the Basic Setting Items Also see pages 13 17 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU 2 Press A V to move
46. DE 100 8 28 AS B SIE ge 8 Ws Be AUDIO TV VCR Kr te rO AC ZN VOLUME Check to see if its remote control mode selector is set to the correct position To operate the audio system TVs VCRs and DVD players set it to AUDIO TV VCR TVVOL CHANNEL MmBrR RM SRX8000J REMOTE CONTROL 46 Tuner You can always perform the following operations with the remote control mode selector set to AUDIO TV VCR FM AM Alternates between FM and AM After pressing FM AM with the remote control mode selector set to AUDIO TV VCR you can perform the following operations 1 10 10 Selects a preset channel number directly For channel number 5 press 5 For channel number 15 press 10 then 5 For channel number 20 press 10 then 10 TUNING UP TUNING DOWN Tunes into stations FM MODE Changes the FM reception mode Sound control section Amplifier You can always perform the following operations with the remote control mode selector set to AUDIO TV VCR SURROUND ON OFF Turns on or off the Surround modes Dolby Pro Logic Dolby Digital and DTS Digital Surround SURROUND MODE Selects the DSP modes After pressing SOUND with the remote control mode selector set to AUDIO TV VCR you can perform the following operations SEA MODE Changes the SEA modes SUBWOOFER Adjusts the subwoofer outp
47. ENTER and to determine the selection ENTER To exit from the Disc information screen Press EXIT Notes The on screen display will disappear in the following cases if no operation is done for about 10 minutes if you do any operation other than explained in this section e To control the MD recorder using the TEXT COMPU LINK remote control system you have to change the source name shown on the display from TAPE to MD See page 13 e Some special characters and marks cannot be displayed correctly W Searching for a Disc Only for the CD player Search for a disc by its performer 1 Press TEXT DISPLAY while CD is selected as the source The Disc Information screen appears on the TV Press A V to move SOURCE CD to SEARCH then bisc seaacu press SET PERFORMER The DISC SEARCH screen DISC TITLE appears TD ENTER BACK Press A V to move SOURCE CD to PERFORMER then press SET The PERFORMER SEARCH screen appears Press A V lt 1 to move c in front of the first character of the performer you want to search then press SET To correct the incorrect entry press A V lt gt to move C in front of the correct character then press SET Note Symbols such as or cannot be available for search Press SET again SOURCE CD Disc search starts then the xx SEARCH RESULT SEARCH RESULT screen showing the performers
48. HE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT INCONVENIENCE LOSS OR ANY OTHER DAMAGES WHETHER DIRECT INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION DAMAGE TO TAPES RECORDS OR DISCS RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty last so these limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state JVC COMPANY OF AMERICA 1700 Valley Road DIVISION OF JVC AMERICAS CORP Wayne NJ 07470 kx k k ae a ae a ee a Se ae Se ae a ae ae ae ae ae Se ae ae a ee a ae a ae ae a a ae a ee ae a eS REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY THIS WARRANTY DOES NOT APPLY FOR DETAILS OF REFURBISHED PRO DUCT WARRANTY PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT F F F F OF F OF OF OF OF OF OF OF F OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF OF FOF OF OF OF
49. JVC MM AUDIO VIDEO CONTROL RECEIVER RX 8000VBK gisita AP Dynamic SuperA COAORADII IIA vV W hi AY COMDU LINK CORTOU LIAI Illi Remote lll 0 3D PHONIC DIGITAL SURROUND cara Ddo DIGITAL For Customer Use Enter below the Model No and Serial No which are located either on the rear bottom or side of the cabinet Retain this information for future reference Model No Serial No LVT0427 001A J Warnings Cautions and Others RISK OF ELECTRIC SHOCK DO NOT OPEN e CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Caution POWER switch Disconnect the mains plug to shut the power off completely The POWER switch in any position does not disconnect the mains line The power can be remote controlled Caution SPEAKER LOAD SELECTOR switch The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the
50. M TV DBS while viewing the picture from a video component such as the VCR or DVD player etc 2 Turn SOURCE SELECTOR to select the sound except the TV sound while the indication of the above step is still on the display Notes e Once you have selected a video source pictures of the selected source are sent to the TV until you select another video source The TV DBS button only works for selecting DBS as the source but not for selecting TV SOUND When you use the DBS tuner change the source name correctly see page 13 Adjusting the Volume On the front panel To increase the volume turn MASTER L F VOLUME clockwise To decrease the volume turn it counterclockwise e When you turn MASTER VOLUME rapidly the volume level also changes rapidly e When you turn MASTER VOLUME slowly the volume level also changes slowly From the remote control VOLUME gt CAUTION Always set the volume to the minimum before starting any source If the volume is set at its high level the sudden blast of sound energy can permanently damage your hearing and or ruin your speakers To increase the volume press VOLUME To decrease the volume press VOLUME Note The volume level can be adjusted within the range of 0 minimum to 90 maximum Selecting the Front Speakers On the front panel ONLY When you have connected two pairs of the front speakers you can select
51. OF OF OF OF OF OF OF OF OF For customer use Enter below the Model No and Serial No which is located either on the rear bottom or side of the cabinet Retain this information for future reference Model No Serial No Purchase date Name of dealer VICTOR COMPANY OF JAPAN LIMITED A EN 0100HIMMDWJEIN
52. ONIC mode settings see page 25 DAP mode settings see page 25 Surround mode settings see page 26 e DVD MULTI playback mode settings see page 31 On the front panel ONLY To store the sound settings 1 Press ONE TOUCH OPERATION NTOUCHOPERATION The ONE TOUCH OPERATION lamp lights We up then the previously memorized settings are recalled 2 Adjust the sound using the functions listed above The newly adjusted settings are memorized To recall the sound settings With the ONE TOUCH OPERATION lamp lit the settings for the currently selected source are recalled when the source is selected To cancel the One Touch Operation function Press ONE TOUCH OPERATION so that the lamp goes off Even though the One Touch Operation function is canceled the recalled sound effects remain active Notes e Ifthe source is FM or AM you can assign a different setting for each band e The DSP modes and DVD MULTI playback mode cannot be used at the same time 18 Using the Sleep Timer Using the Sleep Timer you can fall asleep to music and know the receiver will turn off by itself rather than play all night From the remote control ONLY Press SLEEP repeatedly The SLEEP indicator lights up on the display and the shut off time changes as follows in minutes E 20 30 40 50 60 70 80 90 00 ee aaa When the shut off time comes The receiver turns off automatically SLEEP
53. R 2 jacks on the receiver Notes x O wer e When connecting only the VCR 1 or DVD player to this terminals DO NOT use these video terminals To Video input 1 MONITOR our D IMPORTANT S E a pate If the AV COMPU LINK terminal receiver connect it directly to Connect to the terminal indicated in the on the TV is AV COMPU LINK the receiver using cable with illustration EX the monaural mini plugs DO NOT connect to the TV terminal e Refer also to the manuals COMPU 6X supplied with your video z components CONNECTIONS 2 CASE1 If the components are equipped with the S video CASE2 If the components are not equipped with the S video terminals CASES If only the VCR is equipped with the S video terminal DO NOT use these video terminals DVD player To Video input 2 If only the DVD player is equipped with the S video terminal To Video input 1 44 1 If you have already plugged your VCR 1 VCR connected to the VCR 1 jacks DVD player TV and this receiver into the AC outlets unplug their AC power cords first 2 Connect your VCR 1 DVD player TV and this receiver as follows using the cables with the monaural mini plugs not supplied e See CONNECTIONS 1 on the previous page 3 Connect the
54. RTANT When using the remote control check to see if its remote control mode selector is set to the correct Wey T position To operate this receiver set it to AUDIO TV VCR CATV DBS Selecting Your Favorite SEA Mode On the front panel Press SEA MODE repeatedly until the SEA mode you want appears on the display e Each time you press the button the SEA mode changes as follows SEA ROCK gt SEA MUSICAL SEA MOVIE SEA COUNTRY SEA OFF SEA USERMODE SEA JAZZ a SEA MODE SEA ROCK Gives a heavy sound Both high and low frequencies are boosted SEA MUSICAL Enhances the mid frequency range which the human voice is mostly made up of SEA MOVIE Adds breadth to sounds so you feel like you are in a movie theater SEA COUNTRY Enhances the high frequency range so that instruments such the violin and banjo are emphasized SEA JAZZ Gives a feeling of a live atmosphere Good for acoustic music SEA USERMODE Your original SEA adjustment see the right SEA OFF No SEA mode is applied see below Notes e The SEA modes cannot be used for recording e When the SEA mode is turned on the SEA indicator lights up on the display e When the SEA mode is used with the DAP mode see page 25 sounds may be distorted If this happens turn off the DAP mode or decrease the effect level of the DAP mode To cancel the SEA mode Press SEA MODE repeatedly until SEA OFF a
55. SAMSUNG 24 FUNAI 10 14 15 16 SANYO 21 22 23 GOLD STAR 12 SHARP 27 28 HITACHI 04 SHINTOM 30 To change the transmittable signals for operating a DVD player 1 Set the remote control mode to AUDIO TV VCR 2 Press and hold VCR 1 POWER 3 Press DVD 4 Enter manufacturer s code two digits using buttons 1 9 and 0 See the list below to find the code Examples For a JVC product press 0 1 For a SONY product press 0 5 5 Release VCR 1 POWER After pressing DVD or DVD MULTI with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a DVD player PLAY Starts playing aa Returns to the beginning of the current or previous track l Skips to the beginning of the next track STOP Stops playing PAUSE Stops playing temporarily To release it press PLAY After pressing DVD these buttons can be used for the DVD menu Pi operations aa Note CG For detailed menu operations refer to the ae instructions supplied with the discs or the DVD player Note Refer to the manual supplied with your DVD player 6 Try to operate your DVD player by pressing one of the above buttons e DO NOT forget to turn on the DVD player before pressing one of the above buttons JVC PANASONIC PHILIPS PIONEER SONY TOSHIBA YAMAHA Manufacturers codes are subject to change without not
56. T 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied fp CENTER SHARP1 CENTER On the front panel You can also use the buttons on the front panel to adjust the Surround modes However no test tone is available when using the buttons on the front panel So make adjustments while listening to the sound of the source played back 1 2 SURROUND ON OFF Press SURROUND ON OFF to activate an appropriate Surround mode PRO LOGIC DOLBY DIGITAL or DTS SURROUND e Each time you press the button the Surround mode turns on and off alternately e When PRO LOGIC is selected the D0 PRO LOGIC indicator lights up on the display Adjust the speaker output levels eae 1 Press BALANCE SURROUND oo ADJUST repeatedly until one of the indications appears on the display CENTER LEVEL To adjust the center speaker level REAR L LEVEL To adjust the left rear speaker level REAR R LEVEL To adjust the right rear speaker level 2 Turn MULTI JOG to adjust the selected speaker output level from 10 dB to 10 dB 3 Repeat 1 and 2 to adjust the other speaker output levels MULTI JOG Q SURROUND ADJUST Adjust the center tone 1 Press BALANCE SURROUND ADJUST repeatedly until CENTER TONE appears on the display The display changes to show the current setting 2 Turn MULTI JOG to select the center tone level you want
57. TROL the playing source does not change DVD player After pressing DVD or DVD MULTI with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a DVD player PLAY Starts playing Haa Returns to the beginning of the current or previous track l Skips to the beginning of the next track STOP Stops playing PAUSE Stops playing temporarily To release it press PLAY Q Note Ome gt For detailed menu operations refer to the instructions supplied with the discs or the ha DVD player After pressing DVD or DVD MULTI these buttons can be used for the DVD menu operations TV You can always perform the following operations with the remote control mode selector set to AUDIO TV VCR TV POWER Turns on or off the TV TV VOL Adjusts the volume TV VIDEO Sets the input mode either TV or VIDEO After pressing TV DBS with the remote control mode selector set to AUDIO TV VCR you can perform the following operations ona TV CHANNEL Changes the channels 1 9 0 100 Selects the channels RETURN Alternates between the previously selected channel and the current channel Tal Operating Other Manufacturers Video Equipment This remote control supplied with the receiver can transmit control signals for other manufacturers VCRs TVs DVD players CATV converters and DBS tuners By changing the transmittable s
58. TUNER CONTROL then press lt gt The TUNER CONTROL menu appears Tune into a station on the TUNER CONTROL menu referring to Operating the Tuner on the previous page Press A V to move to PRESET MEMORY then press lt b gt The PRESET MEMORY menu appears ORY WH AUTO MUTING SET MEMORY BOOG OPERATE Press lt to select a preset station number you want Press SET to store the setting When you finish press EXIT repeatedly until the menu disappears from the TV Assigning Names to Preset Stations 1 Also see page 20 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Press A V to move to TUNER CONTROL then press lt 1 gt The TUNER CONTROL menu appears Press A V to move to PRESET CH Press lt gt to select a preset station Press A V to move to PRESET MEMORY then press lt gt The PRESET MEMORY menu appears UTO MUTING GED MEMORY OPERATE 6 10 Press A V lt gt to Press A V to move to PRESET NAME then press SET The character entry screen appears Press A V lt gt to move c in front ofa character you want You can also select the following Gea ny mm E M R R A L w 1 rxv 32 5 DABO OPERATE GPACE To enter space CANCEL To erase the cha
59. To audio output wees To audio input Note You can connect either a cassette deck or an MD recorder to the TAPE MD jacks When connecting an MD recorder to the TAPE MD jacks change the source name which will be shown on the display when selected as the source to MD See page 13 for details CD recorder CD recorder To audio input To audio output AUDIO RIGHT LEFT VIDEO S VIDEO j0 OO 0 IEE 0 OA QO a MONITOR If your audio components have a COMPU LINK or TEXT COMPU LINK jack e See also page 38 for detailed information about the connection and the COMPU LINK remote control system e See also page 39 for detailed information about the connection and the TEXT COMPU LINK remote control system Video component connections Use the cables with RCA pin plugs not supplied Connect the white plug to the audio left jack the red plug to the audio right jack and the yellow plug to the video jack If your video components have S video Y C separation terminals connect them using S video cables not supplied Connecting these video components through the S video input output terminals will give you better picture playback or recording quality 6 IMPORTANT This receiver is equipped with both the composite video and S video input output terminals for connecting video components You do not have to con
60. V or 2 DBS 4 CDR gt 2 CD 3 TV or 2 DBS 4 MD gt back to the beginning When the DIGITAL 1 is set to MD 2 DVD 3 TV or 2 DBS 4 CDR gt 2 CD 3 TV or 2 DBS 4 CDR gt 2 CD 3 TV or 2 DBS 4 DVD gt 2 CD 3 DVD 4 CDR gt back to the beginning 16 When the DIGITAL 1 is set to CDR 2 CD 3 TV or 4 DBS 4 MD gt 2 CD 3 MD 4 DVD gt 2 MD 3 TV or 4 DBS 4 DVD gt 2 CD 3 TV or 4 DBS 4 DVD gt back to the beginning When the DIGITAL 1 is set to TV or DBS 2CD3DVD4CDR 2CD3DVD4MD 2CD3MD4CDR 2MD3DVD4CDR back to the beginning When the DIGITAL 1 is set to CD 2 MD 3 TV or 3 DBS 4 CDR gt 2 DVD 3 TV or 3 DBS 4 CDR gt 2 DVD 3 TV or 3 DBS 4 MD gt 2 DVD 3 MD 4 CDR gt back to the beginning If you have changed the source name from TV SOUND to DBS DBS appears Note When shipped from the factory the DIGITAL IN terminals can be used as the digital input for the following components e DIGITAL 1 coaxial For DVD player e DIGITAL 2 optical For CD player DIGITAL 3 optical For digital TV broadcast tuner DIGITAL 4 optical For CD recorder Selecting the Analog or Digital Input Mode When you have connected digital source components using the digital terminals see page 8 you need to change the input mode for these components to the appropriate digital inpu
61. Video camera DVD player The VIDEO input jacks on the front panel are convenient when connecting and disconnecting the equipment frequently SYREN You connect the DMD player with st reo output jacks VIDEO S VIDEO VIDEO DVD player A L AUDIO R ONA To audio output EY fa aka To S video output LEFT VIDEC _eme eee RIGHT S VIDEO To composite video output A To front left right channel audio output or to audio mixed TV and or DBS tuner output if necessary B To S video output When connecting the TV DO NOT connect the c To composite video output TV s video output to these video input terminals e When you connect the DVD player with its analog discrete output 5 1 CH reproduction jacks ao VIDEO AUDIO RIGHT LEFT S VIDEO DVD player F RIGHT O LEFT eee Oe FI Connect the TV to the MONITOR OUT jack to view the playback picture from the other connected video components O OOOO OOOOH To composite video input To S video input RIGHT LEFT VIDEO S VIDEO AUDIO To center channel audio output To audio gt output IC
62. ates between FM and AM FM AM 2 Press TUNING UP or TUNING DOWN repeatedly until you find the frequency you want e When you hold the button and release it the frequency keeps changing until a station is tuned in TUNING UP DOWN TUNING Note When a station of sufficient signal strength is tuned in the TUNED indicator lights up on the display When an FM stereo program is received the STEREO indicator also lights up Using Preset Tuning Once a station is assigned to a channel number the station can be quickly tuned You can preset up to 30 FM and 15 AM stations To store the preset stations Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel ONLY 1 Tune in the station you want to preset see Tuning in Stations Manually e If you want to store the FM reception mode for this station select the FM reception mode you want See Selecting the FM Reception Mode on page 20 ANALOG LINEAR PCM pg oma dts D TUNER MEMORY E CH appears and the channel number position starts flashing on the display for about 10 seconds 2 Press TUNER SEA MEMORY ANALOG AAAA G LINEAR PCM CHa siune DO oc T TERMS dts ee 7 i i voruve 24 MULTI JOG N
63. ay The display changes to show the current setting 2 Turn MULTI JOG to select the center tone level you want e As you turn it the display changes to show the following MULTI JOG Q p CENTER SHARP1 gt CENTER SHARP2 CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT 2 To make the dialogue clearer select CENTER SHARP1 little or CENTER SHARP2 much To make the dialogue softer select CENTER SOFT 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied 4 Adjust the effect level 1 Press BALANCE SURROUND ADJUST repeatedly until DSP EFFECT appears on the display The display changes to show the current setting Snes 2 Turn MULTI JOG to select the effect N level As you turn it the effect level changes as follows DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 ae EFFECT 5 DSP EFFECT 4 oo As the number increases JVC Theater Surround becomes stronger SURROUND ADJUST Activating the DSP Modes You can use only one DSP mode at a time When a DSP mode is activated another DSP mode is canceled if in use For Dolby Pro Logic Dolby Digital and DTS Digital Surround 1 Press SURROUND ON OFF so that the lamp on the front panel button lights up e Each time you press the button the Dolby DTS Surround turns on and off alternately SURROUND ON OFF SURROUND Sy On the remote control On the
64. d 95 F e Make sure there is good ventilation around the receiver Poor ventilation could cause overheating and damage the receiver Handling the receiver e Do not insert any metal object into the receiver e Do not disassemble the receiver or remove screws covers or cabinet e Do not expose the receiver to rain or moisture Checking the Supplied Accessories Check to be sure you have all of the following items which are supplied with the receiver The number in the parentheses indicates quantity of the pieces supplied e Remote Control 1 e Batteries 2 e AM Loop Antenna 1 e FM Antenna 1 If anything is missing contact your dealer immediately Connecting the FM and AM Antennas FM Antenna Connections FM Antenna Extend the supplied FM antenna horizontally FM 75 Q COAXIAL Outdoor FM Antenna Cable A Using the Supplied FM Antenna The FM antenna provided can be connected to the FM 75Q COAXIAL terminal as temporary measure B Using the Standard Type Connector Not Supplied A standard type connector should be connected to the FM 75Q COAXIAL terminal Note If reception is poor connect the outdoor antenna Before attaching a 75Q coaxial cable the kind with a round wire going to an outdoor antenna disconnect the supplied FM antenna AM Antenna Connections Snap the tabs on the loop into the ANTENNA slots of the base to assemble the FM 75
65. d as the source The Disc Information screen appears on the TV 2 Press A V to move to TITLE INPUT then press SET The TITLE INPUT PERFORMER screen appears SED ENTER EK BACK 3 Press A V lt 1 to move in front of a character you want then press SET to enter the character e If the current CD is a CD Text go to step 5 without entering the performer To use the lower case letters press A V lt to move to GHIFT then press SET To use the upper case letters again press A V lt 1 to move CG to GHIFT then press SET 4 Repeat step 3 until you finish putting a performer name up to 32 characters To insert a space press A V lt 1 to move to then press SET To correct an incorrect character 1 Press A V lt 1 gt to move to or gt then press SET until the incorrect character is selected 2 Press A V lt 1 amp to move to then press SET to erase the character 3 Press A V lt 1 to move in front of the correct character then press SET to enter the correct character xi BACK 5 Press A V lt 1 C gt to move to DISC 1 MICHAEL in this example then press SET The TITLE INPUT DISC TITLE screen appears co OnN AZ D Q mc 6 Enter the disc title referring to steps 3 and 4 If the current CD is a CD Text go to the next step without entering the disc title 7 Press A V lt 1 gt
66. d in yellow e When you move C toa track number you can change the track information by pressing lt Each time you press the button track information alternates between its track title and its performer You can also start playing the track by pressing SET Select this move F in front then press SET to go to the DISC SEARCH screen see page 41 Select this move C in front then press SET to go to the TITLE INPUT screen see page 42 This appears only when a CD Text is selected Disc information such as the disc title performer and music genre When this is selected in front you can change the disc information by pressing lt gt Each time you press the button disc information see Note on D changes Select P or J then press SET to change the track Usable buttons and their functions for the current selection Indication here will be changed according to what is currently selected in front on the screen See Note on ONO QO OO Note on D The following information will appear on the display e For CD Texts Disc title Performer Genre Song writer Composer Arranger Message Only recorded information will be shown If there is no data NO DATA will appear e For MDs Disc title If there is no data NO DATA will appear Note on For example the SET button will be used to start play PLAY to go to the next screen
67. d the code Examples For a JVC product press 0 1 For an NEC product press 2 5 Release VCR 1 POWER The following button can be used for operating the VCR with the remote control mode selector set to AUDIO TV VCR VCR 1 POWER Turns on and off the VCR After pressing VCR 1 or VCR 1 CONTROL with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on the VCR 1 CHANNEL Changes the TV channels on the VCR 1 10 0 100 10 Selects the TV channels The 100 10 button will function as the ENTER button if your VCR requires pressing ENTER after selecting a channel number PLAY Starts playback lt lt Rewinds a video tape gt gt Fast winds a video tape STOP Stops operation PAUSE Pauses REC Starts recording or enters recording pause Notes e Refer to the manual supplied with your VCR e You can use either VCR 1 button or the VCR 1 CONTROL button to activate the buttons listed above If you press VCR 1 the playing source also changes On the other hand if you press VCR 1 CONTROL the playing source does not change Try to operate your VCR by pressing VCR 1 POWER When your VCR turns on or off you have entered the correct code If there are more than one code listed for your brand of VCR try each one until the correct one is entered Manufacturer PHILIPS 09 Codes 01 02 03 EMERSON 11 26 RCA 05 06 FISHER 29
68. directly For track number 5 press 5 For track number 15 press 10 then 5 For track number 20 press 10 then 10 For track number 30 press 10 10 then 10 Note When you start recording on the CD recorder use the buttons on the CD recorder itself or on the remote control supplied with it Turntable After pressing PHONO with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a turntable PLAY STOP Starts playing Stops operations Cassette deck After pressing TAPE MD or TAPE MD CONTROL with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a cassette deck PLAY Starts playing lt lt Fast winds the tape from right to left gt Fast winds the tape from left to right STOP Stops operations PAUSE Pauses playing To release it press PLAY REC Press this button with the PLAY button to start recording Press this button with the PAUSE button to enter recording pause MD recorder After pressing TAPE MD or TAPE MD CONTROL with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on the MD recorder PLAY Starts playing Haa Returns to the beginning of the current or previous track gt l Skips to the beginning of the next track STOP Stops playing PAUSE Pauses playing To release it press PLAY REC Press this button w
69. e 8 DTS Digital Surround DTS Digital Surround is another discrete 5 1 channel digital audio format available on CD LD and DVD software Comparing to Dolby Digital audio compression rate is relatively low This fact allows DTS Digital Surround format to have more data recorded than Dolby Digital even using the same media and to add breadth and depth to the reproduced sounds As a result DTS Digital Surround features natural solid and clear sound e To enjoy the software encoded with DTS Digital Surround you must connect the source component using the digital terminal on the rear of this receiver See page 8 JVC Theater Surround In order to reproduce a more realistic sound field in your listening room while playing soundtracks of software encoded with Dolby Surround bearing the mark D poweysunnouno Notes e The DSP modes have no effect on monaural sources e When you select DVD MULTI as the source to play you cannot select or adjust the DSP modes The D0 PRO LOGIC indicator lights up when the Dolby Pro Logic decoder built in this receiver is activated DVD MULTI Playback Mode This receiver provides the DVD MULTI playback mode for reproducing the analog discrete 5 1 channel output mode of the DVD player or other equipment You can adjust the DVD MULTI playback mode while playing back a video software such as a DVD using the analog d
70. e not correctly done When you try to use the TEXT COMPULINK function a few seconds after you turn on the connected equipment This is not a malfunction of the units Refer also to the manuals supplied with your CD player or MD recorder IMPORTANT If you turn on the receiver before turning on the other components after connecting the components the TEXT COMPU LINK remote control system does not work correctly If this happens 1 Turn off all the components including this receiver 2 Turn on the connected components 3 Turn on this receiver 39 OPERATIONS To use this remote control system you need to connect the TV to the MONITOR OUT jack on the rear panel see page 7 and set the TV s input mode to the proper position to which the receiver is connected Make sure you have connected the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system If not you cannot use the following functions On Screen Operation buttons on the remote control i Showing the Disc Information on the TV Screen Press TEXT DISPLAY while CD or MD is selected as the source The Disc Information screen appears on the TV SOURCE CD v SERACH TITLE INPUT 40 Source name CD or MD Select Q or J then press SET to change the disc Track numbers and track titles e The current playing selected track is indicate
71. e sounds will be distorted If this happens you need to attenuate the input signal level to prevent the sound distortion On the front panel ONLY Press and hold INPUT ATT SOUND SELECT so that the ATT indicator lights up on the display e Each time you press and hold the button the Input Attenuator mode turns on INPUT ATT ON or off INPUT NORMAL Notes e This function is available only for the sources connected using the analog terminals e This function takes effect when the DSP mode is in use e When selecting DVD MULTI as the source this effect does not work Adjusting the Subwoofer Output Level You can adjust the subwoofer output level if you have selected YES for the SUBWOOFER see page 14 Once it has been adjusted the receiver memorizes the adjustment Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again e When the front speakers are all deactivated the subwoofer level cannot be adjusted On the front panel 1 Press BALANCE SURROUND ADJUST repeatedly until SUBWEFR LEVEL appears on the display The display changes to show the current setting SURROUND ADJUST 2 Turn MULTI JOG to adjust the subwoofer output level 10 dB to 10 dB MULTIJOG Q From the remote control 1 Press SOUND SOUND The 10 keys are activated for sound adjustm
72. eeeeeeeees 22 Available DSP Modes According to the Speaker Arrangement 24 Adjusting the 3D PHONIC Modes 0 00 cceececeseeeseeeteeteeeeeees 25 Adjusting the DAP MOdES sic csicsessccsssocsssessedvesouneives seaceoneeaen says 25 Adjusting the Surround Modes sssesesisisosssesesinesssssessnoesiseeesei 26 Arctivatins the DSP Mod eS sireisas an 29 Using the DVD MULTI Playback Mode 31 Activating the DVD MULTI Playback Mode eee 31 Using the On Screen Menus 0esese000 33 Selecting the Source tO Play cssscesssseosersesoeesstorestencesbesceonees 33 Selecting Different Sources for Picture and Sound 33 Activating the DSP MOdES csc ccis ssiesesscessecseapccescesassussessiereeices Selecting the Analog or Digital Input Mode Adjusting the Front Speaker Output Balance Reinforcing the Bass siscscivcccsscsascsccsssvscessssnesscssescecsecaaciaeses Attenuating the Input Signal s ossessisscsrericorssessrinesisrseessenssieseri Adjusting the Subwoofer Output Level teens Adjusting the DSP Modes misiriosa Adjusting the DVD MULTI Playback Mode Selecting Your Favorite SEA Mode T Creating Your Own SEA Mode siccivscsssssssssesseissaccscssecsussvssvosteses Setting the Basic Setting Items sssssiscrrrisicsscsisisisesesieareiaressse Operating the TUNGT sisser esrar a nen EENE Storing the Preset Statioms seigi narai Assigning Names to Preset Stations ccc ceeeeeseeeenseneeees COMPU LINK
73. eft front speaker Center speaker Right front speaker TEST TONE LS Left rear speaker Notes e You can adjust the speaker output levels without outputting the test tone e No test tone comes out of the center speaker when CENTER SPK is set to NONE see page 14 e No test tone comes out of the rear speakers when REAR SPK is set to NONE see page 14 e Ifthe TV is turned on and the proper video input is selected on the TV the test tone screen will appear on the TV TEST re TEST TONE RS Right rear speaker 4 Adjust the speaker output levels e To adjust the center speaker level press CENTER from 10 dB to 10 dB To adjust the left rear speaker level press REAReL from 10 dB to 10 dB To adjust the right rear speaker level press REAReR from 10 dB to 10 dB REARL vy CENTER REARR 28 5 6 TEST Press TEST again to stop the test tone CNTR TONE Press CNTR TONE to select the center tone level you want The center tone adjustment affects the mid frequency range which the human voice is mostly made up of e Each time you press the button the display changes to show the following Pp CENTER SHARP1 CENTER SHARP2 CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT 2 To make the dialogue clearer select CENTER SHARP1 little or CENTER SHARP2 much To make the dialogue softer s
74. el Notes Not displayed when REAR SPK is set to NONE see page 14 Not displayed when CENTER SPK is set to NONE see page 14 7 When you finish press EXIT repeatedly until the menu disappears from the TV A Adjusting the DVD MULTI Playback Mode Also see page 31 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt gt buttons also displays the MAIN MENU 2 Press A V to move to SOURCE 3 Press lt gt to select DVD MULTI 4 Press A V to move to SOUND CONTROL then press lt The SOUND CONTROL menu appears 5 Press A V to move to SURROUND LEVEL then press lt gt The SURROUND LEVEL menu appears SURROUND LEVEL KBO OPERATE 6 Press A V to move to the item you want to set or adjust then press lt On this adjustment menu you can do the following CENTER LEVEL Adjust the center speaker output level REAR L LEVEL Adjust the left rear speaker output level REAR R LEVEL Adjust the right rear speaker output level CENTER TONE Select the center tone level 7 When you finish press EXIT repeatedly until the menu disappears from the TV Selecting Your Favorite SEA Mode Also see page 21 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt 1 buttons also displays the MAIN MENU 2 Press A V to move to SOUN
75. elect CENTER SOFT 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied Press EFFECT to select an effect level you want e Each time you press the button the effect level changes as follows DSP EFFECT 1 DSP EFFECT 2 gt DSP EFFECT 3 DSP EFFECT 5 lt DSP EFFECT 4 As the number increases JVC Theater Surround becomes stronger EFFECT On the front panel You can also use the buttons on the front panel to adjust the Surround modes However no test tone is available when using the buttons on the front panel So make adjustments while listening to the sound of the source played back DSP MODE 1 Press DSP MODE repeatedly until THEATER appears on the display The D0 PRO LOGIC and DSP indicators also light up on the display 2 Adjust the speaker output levels 1 Press BALANCE SURROUND ADJUST repeatedly until one of the indications appears on the display CENTER LEVEL To adjust the center speaker level REAR L LEVEL To adjust the left rear speaker level REAR R LEVEL To adjust the right rear speaker level 2 Turn MULTI JOG to adjust the selected speaker output level from 10 dB to 10 dB 3 Repeat 1 and 2 to adjust the other speaker output levels SURROUND ADJUST MULTI JOG 3 Adjust the center tone eae 1 Press BALANCE SURROUND ADJUST ADJUST repeatedly until CENTER TONE appears on the displ
76. elected See page 16 The on screen display will disappear if no operation is done for about 1 minute 2 Press A V to move to SOURCE 3 Press lt gt to select the source 4 When you finish press EXIT The menu disappears from the TV W Selecting Different Sources for Picture and 1 Sound Also see page 11 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt gt buttons also displays the MAIN MENU Press A V to move to VISUAL Press lt gt to select a different video source When you finish press EXIT The menu disappears from the TV I Activating the DSP Modes Also see page 29 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt gt buttons also displays the MAIN MENU Press A V to move to MODE Press lt 1 gt to select the DSP mode you want to use When you finish press EXIT The menu disappears from the TV I Selecting the Analog or Digital Input Mode Also see page 16 This selection is only possible when the digital input DIGITAL IN terminal setting have been correctly done for the digital source currently selected 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt gt buttons also displays the MAIN MENU Press A V to move to INPUT Press lt gt to select the digital or analog input you want For
77. ency Effect Attenuator appears on the display The display changes to show the current setting SETTING MULTI JOG 2 Turn MULTI JOG to select the low frequency effect attenuator level e As you turn it the display changes to show the following 0dB 10dB OdB Normally select this 10dB Select this when the bass sound is distorted Note Low frequency effect attenuator setting is not valid for the DVD MULTI playback mode Dynamic Range Compression Setting You can compress the dynamic range difference between maximum sound and minimum sound of the reproduced sound This is useful when enjoying surround sound at night e This function takes effect only when playing back a source using Dolby Digital On the front panel ONLY 1 Press SETTING repeatedly until D RANGE COMP Dynamic Range Compression appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select the appropriate item about the compression level e As you turn it the display changes to show the following OFF gt MID gt MAX OFF Select this when you want to enjoy surround with its full dynamic range No effect applied MID Select this when you want to reduce the dynamic range a little Factory setting MAX Select this when you want to apply the compression effect fully Useful at night Note Dynamic Range Compression setting is not valid
78. ents 2 Press SUBWOOFER to adjust SUBWOOFER the subwoofer output level 10 dB to 10 dB Fl Basic Settings Some of the following settings are required after connecting and positioning your speakers in your listening room while others will make operations easier IMPORTANT When using the remote control check to see if its remote control mode selector is set to the correct position To operate this receiver set it to AUDIO TV VCR AUDIO CATV DBS Recording a Source For analog to analog recording You can record any analog source through the receiver to e the cassette deck or MD recorder connected to the TAPE MD jacks e the VCR connected to the VCR 1 jacks and e the CD recorder or VCR connected to the CDR VCR2 jacks at the same time For digital to digital recording You can record the currently selected digital input through the receiver to a digital recording device connected to the DIGITAL OUT terminal Notes e Analog to digital and digital to analog recordings are not possible e The output volume level bass boost see page 12 SEA modes see page 21 and DSP modes see page 22 cannot affect the recording e The test tone signal see page 26 28 does not come out through the DIGITAL OUT terminal Adjusting the Front Speaker Output Balance If the sounds you hear from the front right and left speakers are unequal you can adjust the speaker outp
79. for the DTS Digital Surround and DVD MULTI playback mode 15 Digital Input DIGITAL IN Terminal Setting When you use the digital input terminals you have to register what components are connected to which terminals DIGITAL IN 1 2 3 4 Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again SETTING On the front panel ONLY To set the DIGITAL 1 terminal 1 Press SETTING repeatedly until COAX DIG IN appears on the display The display changes to show the current setting 2 Turn MULTI JOG to select the appropriate digital terminal setting e As you turn it the display changes to show the following 1 DVD gt 1 MD z gt 1 CDR z 1 TV or 1 DBS 1 CD lt back to the beginning If you have changed the source name from TV SOUND to DBS DBS appears To set the DIGITAL 2 3 4 terminal 1 Press SETTING repeatedly until OPT DIG IN appears on the display The display changes to show the current setting SETTING DIGITAL 3 terminal setting DIGITAL 2 terminal setting DIGITAL 4 terminal setting MULTI JOG 2 Turn MULTI JOG to select the appropriate digital terminal settings e As you turn it the display changes to show the following When the DIGITAL 1 is set to DVD 2 CD 3 MD 4 CDR 2 MD 3 TV or 2 DBS 4 CDR gt 2 CD 3 T
80. h you have connected the large speaker To use this function properly you need to set the crossover frequency level according to the size of the small speaker connected e If you have selected LARGE for all speakers see page 14 this function is set to OFF and cannot be adjusted On the front panel ONLY 1 Press SETTING repeatedly until CROSSOVER FRQ Crossover Frequency appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select the crossover frequency level according to the size of the small speaker connected e As you turn it the display changes to show the following 80Hz gt 100Hz gt 120Hz e Use the following comments as reference when adjusting 80Hz Select this when the cone speaker unit built in the speaker is about 4 4 inches 12 cm 100Hz Select this when the cone speaker unit built in the speaker is about 3 16 inches 10 cm 120Hz Select this when the cone speaker unit built in the speaker is about 3 3 16 inches 8 cm Note Crossover frequency setting is not valid for the DVD MULTI playback mode 3D PHONIC mode and HEADPHONE mode Low Frequency Effect Attenuator Setting If the bass sound is distorted while playing back a source using Dolby Digital or DTS Digital Surround follow the procedure below On the front panel ONLY 1 Press SETTING repeatedly until LFE ATT Low Frequ
81. he following buttons can be used for operating the TV with the remote control mode selector set to AUDIO TV VCR TV POWER Turns on and off the TV TV VOL Adjusts the volume TV VIDEO Sets the input mode either TV or VIDEO After pressing TV DBS with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a TV CHANNEL 1 10 0 100 10 Changes the channels Selects the channels The 100 10 button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number Note Refer to the manual supplied with your TV Try to operate your TV by pressing TV POWER When your TV turns on or off you have entered the correct code If there are more than one code listed for your brand of TV try each one until the correct one is entered Manufacturer Code Manufacturer Code JVC SAMSUNG HITACHI SANYO MAGNAVOX SHARP MITSUBISHI SONY PANASONIC TOSHIBA RCA Manufacturers codes are subject to change without notice If they are changed this remote control cannot operate the equipment ZENITH To change the transmittable signals for operating a CATV converter 1 Set the remote control mode to CATV DBS 2 Press and hold CATV DBS POWER 3 Press TV DBS 4 Enter manufacturer s code two digits using buttons 1 9 and 0 See the list below to find
82. he indication of the disc information Press A V to move C to a searched disc then press lt gt Each time you press lt 1 gt the disc information alternates between its disc title and its performer Starting a disc play and going to the Disc Information screen see page 40 Press A V to move to a searched disc then press SET Showing unseen disc information if more than 5 discs are listed as a result of the search Press A V until they appear e Going back to the GENRE SEARCH screen Press EXIT 42 Entering the Disc Information For the CD Player with the disc memory function You can use the disc memory function through this receiver The disc information its performer disc title and music genre of normal audio CDs will be stored into the memory built in the CD player For the disc memory function refer to the manual supplied with your CD player e The performer disc title and music genre information are usually recorded in a CD Text However if a CD Text has no genre information recorded in the disc itself you can input its music genre by yourself Note You can enter the TITLE INPUT screens for a CD Text and input its titles However you cannot store the titles you have input for a CD Text Example Entering the following information for Disc 1 Performer MICHAEL Disc title MY FAVORITE 1 Press TEXT DISPLAY while CD is selecte
83. his receiver To show it on the display follow the procedure below Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel only 1 Press SETTING repeatedly until FL DISPLAY appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select either muimsoa the source name or the text information to be shown on the display e As you turn it the display changes to show the following NORMAL gt TEXT NORMAL Source name appears during play TEXT Text information appears during play Note Though you have selected TEXT the source name such as CD or MD appears if a playing disc has no text information 17 Storing the Basic Settings and Adjustments One Touch Operation JVC s One Touch Operation function is used to assign and store different sound settings for each different playing source By using this function you do not have to change the settings every time you change the source The stored settings for the newly selected source are automatically recalled The following can be stored for each source e Volume level see page 11 e Bass boost see page 12 e Input attenuator mode see page 12 e Subwoofer output level see page 12 e Balance see page 13 e SEA modes see page 21 e DSP modes 3D PH
84. ice If they are changed this remote control cannot operate the equipment MITSUBISHI 13 NEC 25 PANASONIC 07 17 SONY 18 19 20 ZENITH 08 Manufacturers codes are subject to change without notice If they are changed this remote control cannot operate the equipment 51 Troubleshooting Use this chart to help you solve daily operational problems If there is any problem you cannot solve contact your JVC service center PROBLEM POSSIBLE CAUSE SOLUTION The display does not light up The power cord is not plugged in Plug the power cord into an AC outlet No sound from speakers Speaker signal cables are not connected Check speaker wiring and reconnect if necessary The SPEAKERS 1 and 2 buttons are not set correctly Press SPEAKERS 1 and 2 correctly An incorrect source is selected Select the correct source Muting is activated Press MUTING to cancel the mute Sound from one speaker only Speaker signal cables are not connected properly Check speaker wiring and reconnect if necessary The balance is set to one extreme Adjust the balance properly see page 13 Continuous hiss or buzzing during FM reception Incoming signal is too weak Connect an outdoor FM antenna or contact your dealer The station is too far away Select a new station An incorrect antenna is used Check with your dealer to be sure yo
85. ignals from preset ones to the other manufacturers you can operate the other manufacturer s components using this remote control When operating the other manufacturers components refer also to the manuals supplied with them To operate these components with the remote control first you need to set the manufacturer s code each for VCR TV DVD players CATV converters and DBS tuner POWER DVD DVD MUILTI cD TAPE MD TV DBS VIDEO PHONO FM AM VCR1 CDRIVCR2 ANALOGIDIGITAL SLEEP SURROUND CNTRTONE CENTER a SURROUND TEST REAR L QO CD DISC EFFECT REAR R Cc ORO SOUND SEA MODE SUBWOOFER RETURN FMMODE 100 AUDIO n Giesi 4 Check to see if the remote control mode selector is set to the correct position To operate the audio system TVs VCRs and DVD players set it to lt 9 So eS lt A TUNING AUDIO TV VCR e eD To operate the CATV CD converter and DBS tuner set it to CATV DBS MBR RM SRX8000J REMOTE CONTROL To change the transmittable signals for operating another manufacturer s TV 1 Set the remote control mode to AUDIO TV VCR Press and hold TV POWER Press TV DBS Enter manufacturer s code two digits using buttons 1 9 and 0 See the list below to find the code Examples For a JVC product press 0 1 For a SANYO product press 1 3 Release TV POWER T
86. iscrete 5 1 channel output mode e For the DVD MULTI playback mode connection see page 7 e For details on the DVD MULTI playback mode see page 31 Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished Works 1992 1997 Dolby Laboratories Inc All rights reserved Manufactured under license from Digital Theater Systems Inc US Pat No 5 451 942 and other world wide patents issues and pending DTS and DTS Digital Surround are trademarks of Digital Theater Systems Inc 1996 Digital Theater Systems Inc All rights reserved 23 Available DSP Modes According to the Speaker Arrangement Available DSP modes will vary depending on how many speakers are used with this receiver Make sure that you have set the speaker information correctly see page 14 Speaker arrangements Available DSP modes Each time you press DSP MODE on the front panel or SURROUND MODE on the remote control the DSP modes change as follows e 3D THEATER e LIVE CLUB e DANCE CLUB e HALL e PAVILION e 3D ACTION e DSP OFF DSP mode is canceled Front Front speaker speaker Each time you press DSP MODE on the front panel or SURROUND MODE on the remote control the DSP modes change as follows By pressing DSP MODE e THEATER e LIVE CLUB e DANCE CLUB e HALL e PAVILION e 3D ACTION
87. istance from your listening point to the rear speakers is equal to that to the front speakers select 0 msec As the distance to the rear speakers becomes shorter increase the delay time e msec increase or decrease in delay time corresponds to 11 i6 inches 30 cm decrease or increase in distance e Rear delay time for Dolby Digital and DTS Digital Surround is to be set to 5 msec e When shipped from the factory delay time is set to 5 msec On the front panel ONLY 1 Press SETTING repeatedly until REAR DELAY appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select the delay time of the rear speaker output O Turn it clockwise to increase the delay time from 0 msec R DELAY 0ms to 15 msec R DELAY 15ms e Turn it counterclockwise to decrease the delay time from 15 msec R DELAY 15ms to 0 msec R DELAY Oms Notes e Rear delay time setting is not valid for the DVD MULTI playback mode e You cannot adjust the rear delay time when you have set REAR SPK to NONE Crossover Frequency Setting Small speakers cannot reproduce the bass sound very well So if you have used a small speaker for any of the front center and rear channels this receiver automatically reallocate the bass elements originally assigned to the channel for which you have connected the small speaker to another channel for whic
88. ith the PLAY button to start recording Press this button with the PAUSE button to enter recording pause Note You can use either TAPE MD button or the TAPE MD CONTROL button to activate the buttons listed above If you press TAPE MD the playing source also changes On the other hand if you press TAPE MD CONTROL the playing source does not change 47 Operating Video Components IMPORTANT To operate JVC s video components using this remote control You need to connect JVC video components through the AV COMPU LINK terminals see page 44 in addition to the connections using cables with RCA pin plugs see pages 6 and 7 Some JVC VCRs can accept two types of the control signals remote code A and B Before using this remote control make sure that the remote control code of the VCR connected to the VCR 1 jacks is set to code A When using the remote control For the DVD player and VCR operations aim the remote control directly at the remote sensor on each component not on the receiver For the TV operations E If the TV has the AV COMPU LINK terminal RECEIVER AMP aim the remote control directly at the remote sensor on the receiver E If the TV has the AV COMPU LINK terminal AV COMPU LINK EX aim the remote control directly at the remote sensor on the TV DVD MUILTI CD TAPE MD CO CO VIDEO PHONO FM AM VCR1 CDRWCR2 ANALOGIDIGITAL SLEEP CO
89. llowing steps If the setting is canceled before you finish start from step 1 again Front Center and Rear Speaker Setting Register the sizes of all the connected speakers e When you change your speakers you need to register the information about the speakers again On the front panel ONLY 1 Press SETTING repeatedly until FRONT SPK Front Speaker CENTER SPK Center Speaker or REAR SPK Rear Speaker appears on the display The display changes to show the current setting SETTING 2 Turn MULTI JOG to select the appropriate item about the speaker selected in the above step Q e As you turn it the display changes to show the following LARGE SMALL gt NONE LARGE SMALL NONE Select this when the speaker size is relatively large Select this when the speaker size is relatively small Select this when you have not connected a speaker Not selectable for the front speakers 14 3 Repeat steps 1 and 2 to select the appropriate items for the other speakers Notes Keep the following comment in mind as reference when adjusting If the size of the cone speaker unit built in your speaker is greater than 4 9 4 inches 12 cm select LARGE and if it is smaller than 4 4 inches 12 cm select SMALL e If you have selected NO for the subwoofer setting you can only select LARGE for the front speaker setting e If you have selected
90. ly depending on which component has been previously selected When you turn off the receiver the connected components will turn off standby Synchronized Recording Synchronized recording means the cassette deck or MD recorder starts recording as soon as a CD or a record begins playing e When using a CD recorder for synchronized recording refer to the manual supplied with it To use synchronized recording follow these steps 1 Put a tape in the cassette deck or an MD in the MD recorder and a disc in the CD player or a record on the turntable 2 Press the record button and the pause II button on the cassette deck or MD recorder at the same time This puts the cassette deck or MD recorder into recording pause If you do not press the record button and pause I button at the same time the synchronized recording feature will not operate 3 Press the play button on the CD player or on the turntable The source changes on the receiver and as soon as play starts the cassette deck or MD recorder starts recording When the play ends the cassette deck or MD recorder enters recording pause and stops about 4 seconds later Notes e During synchronized recording the selected source cannot be changed e If the power of any component is shut off during synchronized recording the COMPU LINK remote control system may not operate properly In this case you must start again from the begin
91. mode correctly For details see Selecting the Analog or Digital Input Mode on page 16 Digital input terminals DBS tuner DVD player as EE OE ee com A cote m O CD player PO O OOOO N mm o O A o E A CD recorder MD recorder O O N PO O OOOO N a a SS EES o TE M ree E Digital coaxial cable not supplied between digital coaxial terminals Digital optical cable not supplied between digital optical terminals When the component has a digital coaxial output terminal connect it to the DIGITAL 1 DVD terminal using the digital coaxial cable not supplied Peame EVSA PCM DOLBY DIGITAL DTS DIGITAL 1 DVD When the component has a digital optical output terminal connect it to the DIGITAL 2 CD DIGITAL 3 TV or o DIGITAL 4 CDR terminal using the DIGITAL 2 CD digital optical cable not supplied D DIGITAL 3 TV Before connecting a digital optical cable unplug the 9 F DIGITAL 4 CDR protective plug Ai v Notes e When shipped from the factory the DIGITAL IN terminals have been set for use with the following components DIGITAL 1 coaxial For DVD player DIGITAL 2 optical For CD player DIGITAL 3 optical For digital TV broadcast tuner DIGITAL 4 optical For CD recorder When you want to operate the CD player CD recorder or MD recorder using the COMPU LINK remote control sys
92. n the SEARCH RESULT screen showing the disc titles appears D EXIT CK On the SEARCH RESULT screen you can do the following e Changing the indication of the disc information Press A V to move to a searched disc then press lt 1 Each time you press lt 1 the disc information alternates between its disc title and its performer e Starting a disc play and going to the Disc Information screen see page 40 Press A V to move C to a searched disc then press SET Showing unseen disc information if more than 5 discs are listed as a result of the search Press A V until they appear e Going back to the DISC TITLE SEARCH screen Press EXIT 41 Search for a disc by its genre 1 Press TEXT DISPLAY while CD is selected as the source The Disc Information screen appears on the TV SOURCE CD 2 Press A V to move tx DISC SEARCH to SEARCH then press SET The DISC SEARCH screen appears SET ENTER PP xl BACK 3 Press A V to move to GENRE then press SET The GENRE SEARCH screen appears fos 5 4 4 Press A V to move to the genre yo search then press SET To show the unseen genres press A V until they appear Disc search starts then the SOURCE CD SEARCH RESULT screen e xx SEARCH RESULT showing the disc titles ose 14 appears 5 On the SEARCH RESULT screen you can do the following e Changing t
93. n watch the playback picture When you select DVD or DVD DIGITAL DVD MULTI VCR 1 VIDEO or DBS or DBS DIGITAL as the source to play on the receiver the TV automatically changes the input mode to the appropriate position either Video Input 1 or Video Input 2 so that you can view the playback picture Note When you select TV SOUND or TV DIGITAL as the source on the receiver you cannot see the menu on the TV screen since the AV COMPU LINK remote control system automatically changes the TV s input mode to the TV tuner If you do not mind stopping listening to the TV sounds you can then show the on screen displays after changing the TV s input mode to the appropriate position either Video Input 1 or Video Input 2 the receiver is connected to E Automatic Power On Off The TV VCR 1 the VCR connected to the VCR 1 jacks and DVD player turn on and off along with the receiver When you turn on the receiver e If the previously selected source is VCR 1 the TV and VCR 1 will turn on automatically If the previously selected source is VIDEO CDR VCR 2 TV SOUND or TV DIGITAL or DBS or DBS DIGITAL only the TV will turn on automatically e If the previously selected source is DVD or DVD DIGITAL or DVD MULTI the TV and DVD player will turn on automatically When you turn off the receiver the TV VCR 1 a
94. nctions listed below Displaying the Disc Information on the TV screen Disc information such as its performer and disc title and track titles only when a CD Text is selected is shown on the TV screen Disc Search Only for CD Player This remote control system can allow you to search discs by the performer disc title and music genre With this disc search you can easily find the disc you want to play Disc Title Input If your CD player or MD recorder has the disc memory function you can input the following information about the normal audio CDs or MDs on the TV screen For CDs Performer disc title and music genre e For MDs Disc title and song titles What is a CD Text In a CD Text some information about the disc its disc title performer composer arranger etc is recorded Notes e If your audio component has two COMPU LINK jacks you can use either one If it has only one COMPU LINK jack connect it so that it is the last item in the series of components For example the CD player in the diagram to the left e If your audio component has two TEXT COMPU LINK jacks you can use either one If it has only one TEXT COMPU LINK jack connect it so that it is the last item in the series of components For example the CD player in the diagram to the left e TEXT COMPULINK SOURCE NOT CONNECTED appears on the display in the following cases When the connections explained to the left ar
95. nd the DVD player will turn off Note If you turn off the receiver while recording on the VCR 1 the VCR 1 will not turn off but continue recording 45 i Operating JVC s Audio Video Components You can operate JVC s audio and video components with this receiver s remote control since control signals for JVC components are preset in the remote control Operating Audio Components IMPORTANT To operate JVC s audio components using this remote control e You need to connect JVC audio components through the COMPU LINK jacks see page 38 in addition to the connections using cables with RCA pin plugs see pages 5 and 6 Aim the remote control directly at the remote sensor on the receiver If you use the buttons on the front panel or the menu function to choose a source the remote control will not operate that source To operate a source with the remote control the source must be selected using source selecting buttons on the remote control To operate the cassette deck or MD recorder using the COMPU LINK remote control system set the source name correctly See page 13 Refer also to the manuals supplied with your components POWER ap DVD MUILTI CD TAPE MD g 2 3 2 S p B VIDEO PHONO FM AM 0 VCR1 CDRNCR2 ANALOGIDIGITAL SLEEP CNTR TONE CENTER TEST REARL m GG O EFFECT REAR R ORO SOUND SEA MODE SUBWOOFER Go RETURN FMMO
96. nect both the composite video and S video terminals However remember that the video signals from the composite video input terminals are output only through the composite video output terminals while the ones from the S video input terminals are output only through the S video output terminals Therefore if a recording video component and a playing video component are connected to the receiver through the different video terminals you cannot record the picture from the playing component on the recording component In addition if the TV and a playing video component are connected to the receiver through the different video terminals you cannot view the playback picture from the playing component on the TV To view and record the playback picture from the video component connected to the CDR VCR 2 jacks you must connect the TV and the recording video component through the composite video terminals VCR S VHS or VHS VCR B AUDIO LEFT VIDEO E 00 1 00 200 Q B VHS VCR To left right channel audio output To left right channel audio input To S video output To composite video output To composite video input TY JM 0 1O gt To S video input
97. nect the following audio video components to this receiver Refer also to the manuals supplied with your components Audio Components e Turntable Video Components e DVD player e TV e DBS tuner e VCR s e Video camera e CD player e Cassette deck or MD recorder e CD recorder You can connect these components using the methods described in Analog connections to the right or in Digital connections see page 8 Analog connections Audio component connections Use the cables with RCA pin plugs not supplied Connect the white plug to the audio left jack and the red plug to the audio right jack CAUTION If you connect a sound enhancing device such as a graphic equalizer between the source components and this receiver the sound output through this receiver may be distorted Turntable f If an earth cable is provided for your S turntable connect the cable to the L J _7 screw marked 74 on the rear panel eee To audio output Note Any turntables incorporating a small output cartridge such as an MC moving coil type must be connected to this receiver through a commercial head amplifier or step up transformer Direct connection may result in insufficient volume CD player CD player To audio output Cassette deck or MD recorder Cassette deck To audio input
98. ning al TEXT COMPU LINK Remote Control System The TEXT COMPU LINK remote control system has been newly developed to deal with the disc information recorded in the CD Text and MDs Using these information in the discs you can operate the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system through the receiver CONNECTIONS To use this remote control system you need to connect the CD player and or MD recorder you want to operate following the procedures below 1 If you have already plugged your CD player MD recorder and this receiver into the AC outlets unplug their AC power cords first 2 Connect your CD player MD recorder and this receiver as follows through the COMPU LINK jacks and TEXT COMPU LINK jacks 1 COMPU LINK jacks Use the cables with the monaural mini plugs not supplied with this receiver COMPU LINK 4 SYNCHRO e 2 TEXT COMPU LINK jacks Use the cables with the stereo mini plugs not supplied with this receiver CD player TEXT COMPU LINK e 3 Connect your CD player MD recorder and this receiver using the cables with RCA pin plugs see pages 5 and 6 4 Plug the AC power cords of these components above into the AC outlets 5 When turning on these components for the first time turn on the connected components first then turn on this receiver FUNCTIONS This remote control system allows you to use the fu
99. ogue clearer select CENTER SHARP1 little or CENTER SHARP2 much To make the dialogue softer select CENTER SOFT 1 little or CENTER SOFT 2 much When CENTER FLAT is selected no adjustment is applied SURROUND JUST 31 From the remote control 1 Press DVD MULTI so that DVD DVD MUILTI MULTI appears on the display Note When you select DVD MULTI as the source to play the DSP mode is canceled temporarily and the SURROUND ON OFF and SURROUND MODE buttons do not work 2 Select the analog discrete output mode on the DVD player and start playing a DVD e Refer to the manual supplied with the DVD player If you need to make any adjustment go to the following steps SOUND 3 Press SOUND The 10 keys are activated for adjusting the sound 4 Adjust the speaker output levels e To adjust the center speaker level press CENTER from 10 dB to 10 dB e To adjust the left rear speaker level press REAR L from 10 dB to 10 dB e To adjust the right rear speaker level press REAReR from 10 dB to 10 dB CENTER REARL REAR R 5 Press CNTR TONE to select the CNTR TONE center tone level you want e Each time you press the button the display changes to show the following pr CENTER SHARP1 CENTER SHARP2 CENTER FLAT Canceled CENTER SOFT 1 CENTER SOFT2 To make the dialogue clearer select CENTER SHARP1
100. ote You can use the 10 keys on the remote control to select the preset number When using the 10 keys be sure that they are activated for the tuner not for the CD and others See page 46 3 Turn MULTI JOG to select a channel number while the channel number position is flashing 4 Press TUNER SEA MEMORY TUNERSEAMEMORY again while the selected channel number is flashing on the display The selected channel number stops flashing The station is assigned to the selected channel number ANALOG LINEARPCM cH Dg oca R dts 5 Repeat steps 1 to 4 until you store all the stations you want To erase a stored preset station Storing a new station on a used number erases the previously stored one 19 To tune in a preset station On the front panel 1 Turn SOURCE SELECTOR to select the band FM or AM The last received station of the selected band is tuned in SOURCE SELECTOR Q TUNER PRESET 2 Press TUNER PRESET 3 Turn MULTI JOG until you find the channel you want e Turning it clockwise increases the channel numbers e Turning it counterclockwise decreases the channel numbers MULTI JOG From the remote control 1 Press FM AM e Each time you press the button the band alternates between FM and AM 2 Press the 10 keys to select a preset channel number e For channel number 5 press 5 e For channel number 15 press 10 then
101. ppears The SEA indicator goes off from the display From the remote control SOUND 1 Press SOUND The 10 keys are activated for sound adjustments 2 Press SEA MODE repeatedly until SEA MODE the SEA mode you want appears on the display To cancel the SEA mode Press SEA MODE repeatedly until SEA OFF appears in step 2 above The SEA indicator goes off from the display Creating Your Own SEA Mode You can adjust and store your own SEA adjustment into memory SEA USERMODE Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel ONLY If you do not want to store your adjustment but rather want to adjust the SEA temporarily skip step 4 below SEA ADJUST 1 Press SEA ADJUST repeatedly until the frequency range 100Hz 1kHz or 10kHz you want appears on the display ANALOG LINEAR PCM Do oer R 3 g dts Pyrs i r EIN i I Joo 1k 10k VORME co ANALOG LINEAR PCM Do ocra R dts MULTI JOG Q 3 Repeat step 1 and 2 to adjust other frequency ranges if necessary 2 Turn MULTI JOG to adjust the SEA level of the selected frequency range e Turning it clockwise increases the level e Turning it counterclockwise decreases the level SEA MEMORY SS 4 Press TUNER SEA MEMORY
102. racter lt gt To go back to the previous character position or go to the next character position Press SET to enter the selected character Repeat steps 7 and 8 to enter up to four characters MEMORY OPERATE move to PRESET NAME then press SET to store the setting The TUNER CONTROL menu aon appears again g JVE ABCD 5 87 5 Wi UTO MUTING PRESET MEMORY rar BQO ENTER 11 When you finish press EXIT repeatedly until the menu disappears from the TV 37 Ba COMPU LINK Remote Control System The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver To use this remote control system you need to connect JVC audio components through the COMPU LINK jacks see below in addition to the connections using cables with RCA pin plugs see pages 5 and 6 e Make sure that the AC power cords of these components are unplugged before connection Plug the AC power cords only after all connections are complete pe OD player CD recorder Cassette deck or MD recorder COMPU LINK 4 SYNCHRO Turntable Notes e There are four versions of COMPU LINK remote control system This receiver is equipped with the fourth version COMPU LINK 4 This version is added systematic operations with the CD recorder to the previous version COMPU LINK 3 e If your audio component has two COMPU LINK jacks you
103. release it press PLAY 1 6 7 P Selects the number of a disc installed in a CD player changer After pressing CD with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on the CD player changer 1 10 10 Selects a track number directly For track number 5 press 5 For track number 15 press 10 then 5 For track number 20 press 10 then 10 For track number 30 press 10 10 then 10 If your CD changer is of 200 disc loading capability except for XL MC100 and XL MC301 you can do the following operations using the number buttons after pressing CD 1 Select a disc number 2 Then select a track number always enter two digits 3 Start playback EXAMPLES e Selecting disc number 3 track number 2 and starting playback Press 3 then 0 2 then gt e Selecting disc number 10 track number 5 and starting playback Press 1 0 then 0 5 then gt e Selecting disc number 105 track number 12 and starting playback Press 1 0 5 then 1 2 then gt CD recorder After pressing CDR VCR 2 with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a CD recorder PLAY Starts playing kaa Returns to the beginning of the current or previous track P Skips to the beginning of the next track STOP Stops playing PAUSE Pauses playing To release it press PLAY 1 10 10 Selects a track number
104. s follows DSP EFFECT 1 DSP EFFECT 2 gt DSP EFFECT 3 DSP EFFECT 5 DSP EFFECT 4 As the number increases the selected DAP mode becomes stronger Adjusting the Surround Modes Once you have adjusted the Surround modes the adjustment is memorized for each Surround mode Dolby and DTS Surround adjustments Before you start remember e Make sure that you have set the speaker information correctly see page 14 e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again e You cannot adjust the rear speaker output levels when you have set REAR SPK to NONE See page 14 e You cannot adjust the center speaker output level and center tone when you have set CENTER SPK to NONE See page 14 From the remote control 1 Press SURROUND ON OFF to SURROUND activate an appropriate Surround mode PRO LOGIC DOLBY gt DIGITAL or DTS SURROUND e Each time you press the button the Surround mode turns on and off alternately e When PRO LOGIC is selected the DU PRO LOGIC indicator lights up on the display Note You can also press SURROUND MODE to activate an appropriate Surround mode 2 Press SOUND SOUND The 10 keys are activated for sound adjustments Eo 3 Press TEST to check the speaker TEST output balance TEST TONE L starts flashing on the display and a test tone comes out of the speakers
105. sts of direct sound and indirect sound early reflections and reflections from behind Direct sounds reach the listener directly without any reflection On the other hand indirect sounds are delayed by the distances of the ceiling and walls These direct sounds and indirect sounds are the most important elements of the acoustic surround effects The DAP mode can create these important elements and gives you a real being there feeling This mode can be used when the front speakers are connected to this receiver without respect to the rear center speaker connection You can select one of the following to your preference while playing an analog or linear PCM source LIVE CLUB Gives the feeling of a live music club with a low ceiling DANCE CLUB Gives a throbbing bass beat HALL Gives clear vocal and the feeling of a concert hall PAVILION Gives the spacious feeling of a pavilion with a high ceiling Reflections from behind Early reflections Surround modes With this receiver you can use three types of the Surround mode Following modes cannot be used when only the front speakers are connected to this receiver without the rear speakers or center speaker Dolby Surround Dolby Digital and Dolby Pro Logic Used to watch the soundtracks of software encoded with Dolby Digital bearing the mark OO eotey or with Dolby Surround bearing the mark DO botsysurrounn Dolby Surround encoding
106. sured with a copy of your bill of sale plus and letter of explanation of the problem to the nearest JVC Factory Service Center the name and location of which will be given to you by the toll free number If you have any questions concerning your JVC Product please contact our Customer Relations Department WHAT IS NOT COVERED This limited warranty provided by JVC does not cover 1 Products which have been subject to abuse accident alteration modification tampering negligence misuse faulty installation lack of reasonable care or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service or if affixed to any attachment not provided with the products or if the model number or serial number has been altered tampered with defaced or removed 2 Initial installation and installation and removal for repair 3 Operational adjustments covered in the Owner s Manual normal maintenance video and audio head cleaning 4 Damage that occurs in shipment due to act of God and cosmetic damage 5 Signal reception problems and failures due to line power surge 6 Video Pick up Tubes CCD Image Sensor Cartridge Stylus Needle are covered for 90 days from the date of purchase 7 Accessories 8 Batteries except the Rechargeable Batteries are covered for 90 days from the date of purchase There are no express warranties except as listed above THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING T
107. t mode correctly AUTO PCM DOLBY DIGITAL or DTS Before you start remember The digital input DIGITAL IN terminal setting should be correctly done for the sources you want to select the digital input mode for Without setting this digital input terminal correctly you cannot change the input mode from analog input to digital input even if you follow the procedure below On the front panel 1 Turn SOURCE SELECTOR until the source CD MD TV SOUND DBS DVD or CDR VCR2 for which you want to change the input mode appears on the display SOURCE SELECTOR Note Among the sources listed above you can select the digital input only for the sources which you have selected the digital input terminals for See Digital Input DIGITAL IN Terminal Setting INPUT ANALOG DIGITAL 2 Press INPUT ANALOG DIGITAL repeatedly until the digital input mode you want appears on the display e Each time you press the button the input mode changes as follows AUTO PCM Digital DOLDY DIGITAL j ANALOG DTS Y Digital Digital Normally select AUTO PCM so the receiver automatically detects the incoming digital signal format The DIGITAL AUTO indicator lights up on the display When the receiver can recognize the digital signal format coming into the receiver the frame of the digital signal indicator for the detected signal lights up automatically When the receiver cannot recognize
108. tal input terminal 2 3 4 see page 16 FL DISP Shows the disc text information on the display see page 17 Notes Not adjustable when CENTER SPK is set to NONE see page 14 Not adjustable when REAR SPK is set to NONE see page 14 When you finish press EXIT repeatedly until the menu disappears from the TV E Operating the Tuner Also see pages 19 and 20 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt gt buttons also displays the MAIN MENU Press A V to move to TUNER l CONTROL then TBs ke I gt AUTO MUTING press lt j SET MEMORY The TUNER CONTROL menu appears O OPERATE Press A V to move to the item you want to set or adjust then press lt On the TUNER CONTROL menu you can do the following PRESET CH Select a preset channel station BAND Select the band FREQUENCY Tune in a station manually FM MODE Select the FM reception mode PRESET MEMORY See Storing the Preset Stations on the next page Note Not displayed when an AM station is selected When you finish press EXIT repeatedly until the menu disappears from the TV a Storing the Preset Stations Also see page 19 1 Press MENU The MAIN MENU appears on the TV e Pressing one of the A V lt buttons also displays the MAIN MENU Press A V to move to
109. tem connect the target component also as described in Analog connections see pages 5 and 6 e When you want to operate the DVD player using the AV COMPU LINK remote control system connect the DVD player also as described in Analog connections see page 7 Digital output terminal MD recorder A CD recorder Digital optical cable not supplied between digital optical terminals When the digital recording equipment such as an MD recorder has a digital optical input terminal connecting it to the DIGITAL OUT terminal enables you to perform digital to digital recording Connecting the Power Cord Putting Batteries in the Remote Control Before plugging the receiver into an AC outlet make sure that all Before using the remote control put two supplied batteries first connections have been made When using the remote control aim the remote control directly at the remote sensor on the receiver Plug the power cord into an AC outlet Keep the power cord away from the connecting cables and the antenna The power cord may cause noise or screen interference We recommend that you use a coaxial cable to connect the antenna since it is well shielded against interference Note The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases When you unplug the power cord When a power failure occ
110. the code Examples For an RCA product press 1 9 For a SONY product press 2 0 5 Release CATV DBS POWER After setting the remote control mode selector to CATV DBS you can perform the following operations on the CATV convertor CATV DBS POWER Turns on and off the CATV converter CHANNEL Changes the channels 1 10 0 100 10 Selects the channels The 100 10 button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number Notes e Refer to the manual supplied with your CATV converter e You cannot set the remote control mode selector both for the CATV converter and the DBS tuner at the same time 6 Try to operate your CATV converter by pressing CATV DBS POWER When your CATV converter turns on or off you have entered the correct code If there are more than one code listed for your brand of CATV converter try each one until the correct one is entered Gl JERROLD 01 02 03 04 05 06 07 08 HAMLIN REGAL 15 16 17 18 PIONEER 13 14 RCA 19 SCIENTIFIC ATLANTA 09 10 SONY 20 ZENITH 11 12 Manufacturers codes are subject to change without notice If they are changed this remote control cannot operate the equipment 50 To change the transmittable signals for operating a DBS tuner 1 Set the remote control mode to CATV DBS 2 Press and hold CATV DBS POWER 3 Press TV DBS 4 Enter manufact
111. u ting the Sound aisre riaan ii 12 R inforcing the Bass sis civscscssesiestssesasszessisassensaacescabccocensosaesconds 12 Attenuating the Input Signal sisisi 12 Adjusting the Subwoofer Output Level n se 12 Basic SettingS 2 0 0cccseceeeeeeeeeeeeeeeeeeeeeeeee 13 Recording AIS OURCE arasen e esos ck civ ae sata AR 13 Adjusting the Front Speaker Output Balance eee 13 Changing the Source Name sireci iriri a 13 Setting the Subwoofer Information 0 eee eeeeeeeeees 14 Setting the Speakers for the DSP Modes 14 Digital Input DIGITAL IN Terminal Setting 16 Selecting the Analog or Digital Input Mode 16 Showing the Text Information on the Display 0 00 00 17 Storing the Basic Settings and Adjustments One Touch OPCPA OW secdecesssatevs siinsatesseatesssodisuresesnivel olmienansarsdeeeacestes 18 Using the Sleep Timer nonr neee aAA EER 18 Receiving Radio Broadcasts 0cceeseeeees 19 Tuning in Stations Manually sssssoissicicssureiinsniisresiecsieiaesn 19 Using Preset Toning sis 3 cers sayausscevscoss ce r a RET 19 Selecting the FM Reception Modes siiis eecceeseeeteeseeeeaes 20 Assigning Names to Preset Stations cceceeeeseeeeeeseteees 20 Using the SEA Modes 0cscseeeeeeeeeeeeees 21 Selecting Your Favorite SEA Mode ssesesseeserereseseseresesssesssseee 21 Creating Your Own SEA Mode 0 0 eeceeeeeeseeeeeteeeeeneeseneeaes 21 Using the DSP Modes 0cscseeeee
112. u have the correct antenna Antennas are not connected properly Check connections Occasional cracking noise during FM reception Ignition noise from automobiles Move the antenna farther from automobile traffic No colors on the on screen display The color system of the connected TV is not NTSC Connect an NTSC TV Howling during record playing Your turntable is too close to speakers Move speakers away from the turntable OVERLOAD starts flashing on the display Speakers are overloaded because of high volume 1 Press POWER on the front panel to turn off the receiver 2 Stop the playback source 3 Turn on the receiver again and adjust the volume Speakers are overloaded because of short circuit of speaker terminals Press POWER on the front panel then check the speaker wiring If OVERLOAD does not disappear unplug the AC power cord then plug it back again If speaker wiring is not short circuited contact your dealer Remote control does not work The remote control mode selector is not set correctly Set the selector correctly either to AUDIO TV VCR or to CATV DBS There is an obstruction in front of the remote sensor on the receiver Remove the obstruction Batteries are weak Replace batteries ee Specifications Amplifier Output Power Audio Audio Input Sensitivity Impedance 1 kHz Audio Input DIGITAL IN
113. urce using the headphones Notes e While in the headphones mode you cannot use any other DSP modes see page 22 e Activating the speaker cancels the headphones mode and turns on the DSP mode previously selected CAUTION Be sure to turn down the volume before connecting or putting on headphones as high volume can damage both the headphones and your hearing Muting the Sound From the remote control ONLY Press MUTING to mute the sound through all speakers and headphones connected MUTING appears on the display and the volume turns off the volume level indicator goes off To restore the sound press MUTING again so that OFF appears on the display Turning MASTER VOLUME on the front panel or pressing VOLUME on the remote control also restores the sound Reinforcing the Bass You can boost the bass level On the front panel ONLY Press BASS BOOST SOURCE NAME BASe BOOST briefly to select the bass boost function Each time you press the button the bass boost function turns on BASSBOOST ON and off BASSBOOST OFF Select BASSBOOST ON to activate the bass boost function The BASS BOOST indicator lights up on the display Select BASSBOOST OFF to cancel it The indicator goes off Note This function affects the front speaker sounds only 12 Attenuating the Input Signal When the input level of the playing source is too high th
114. urer s code two digits using buttons 1 9 and 0 See the list below to find the code Examples For a JVC product press 2 1 For an RCA press 2 9 5 Release CATV DBS POWER After setting the remote control mode selector to CATV DBS you can perform the following operations on the DBS tuner CATV DBS POWER Turns on and off the DBS tuner CHANNEL Changes the channels 1 10 0 100 10 Selects the channels The 100 10 button will function as the ENTER button if your equipment requires pressing ENTER after selecting a channel number Notes e Refer to the manual supplied with your DBS tuner e You cannot set the remote control mode selector both for the CATV converter and the DBS tuner at the same time 6 Try to operate your DBS tuner by pressing CATV DBS POWER When your DBS tuner turns on or off you have entered the correct code JVC ECHOSTAR Gl HITACHI HTS HUGHES NETWORK SYSTEMS PANASONIC PRIME STAR RCA SONY TOSHIBA Manufacturers codes are subject to change without notice If they are changed this remote control cannot operate the equipment To change the transmittable signals for operating another manufacturer s VCR 1 Manufacturer JVC Set the remote control mode to AUDIO TV VCR Press and hold VCR 1 POWER Press VCR 1 Enter manufacturer s code two digits using buttons 1 9 and 0 See the list below to fin
115. urs CAUTIONS Do not touch the power cord with wet hands Do not pull on the power cord to unplug the cord When unplugging the cord always grasp the plug so as not to damage 3 the cord 1 On the back of the remote control remove the battery cover 2 Insert batteries Make sure to match the polarity to 3 Replace the cover If the range or effectiveness of the remote control decreases replace the batteries Use two R6P SUM 3 AA 15F type dry cell batteries CAUTION Follow these precautions to avoid leaking or cracking cells Place batteries in the remote control so they match the polarity to Use the correct type of batteries Batteries that look similar may differ in voltage Always replace both batteries at the same time Do not expose batteries to heat or flame a Basic Operations The following operations are commonly used when you play any sound source IMPORTANT When using the remote control check to see if its remote control mode selector is set to the correct NNT position r To operate this receiver set it to AUDIO TV GATES VCR Turning the Power On and Off Standby On the front panel C STANDBY To turn on the power press POWER The STANDBY lamp goes off The name of the current source or station frequency appears on the display Current source name appears ANALOG LINEAR PCM
116. ut balance Before you start remember e There is a time limit in doing the following steps If the setting is canceled before you finish start from step 1 again On the front panel ONLY 1 Press BALANCE SURROUND ADJUST repeatedly until L R BALANCE appears on the display The display changes to show the current setting BALANCE ADJUST MULTI JOG Q 2 Turn MULTI JOG to adjust the balance e Turning it clockwise decreases the left channel output e Turning it counterclockwise decreases the right channel output Changing the Source Name When you have connected an MD recorder to the TAPE MD jacks or the DBS tuner to the TV SOUND DBS jacks on the rear panel change the source name which will be shown on the display when you select the MD recorder or DBS tuner as the source On the front panel ONLY 1 When changing the source name from TAPE to MD Q Turn SOURCE SELECTOR until TAPE appears When changing the source name from TV SOUND to DBS Turn SOURCE SELECTOR until TV SOUND appears 2 Press and hold SOURCE NAME BASS BOOST until ASSGN MD or ASSGN DBS appears on the display SOURCE NAME To change the source name to TAPE or TV SOUND repeat the same procedure above in step 1 select MD or DBS then press and hold SOURCE NAME BASS BOOST Notes e You can only assign the correct source name to T
117. ut level CENTER Adjusts the center speaker output level REAR eL Adjusts the left rear speaker output level REARsR Adjusts the right rear speaker output level EFFECT Selects the effect level TEST Turns on or off the test tone output CNTR TONE Selects the center tone Note After adjusting sounds press the corresponding source selecting button or CD DISC to operate your target source by using the 10 keys otherwise the 10 keys cannot be used for operating your target source CD player After pressing CD with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on the CD player PLAY Starts playing kaa Returns to the beginning of the current or previous track PP Skips to the beginning of the next track STOP Stops playing PAUSE Pauses playing To release it press PLAY 1 10 10 Selects a track number directly For track number 5 press 5 For track number 15 press 10 then 5 For track number 20 press 10 then 10 For track number 30 press 10 10 then 10 CD player changer After pressing CD DISC with the remote control mode selector set to AUDIO TV VCR you can perform the following operations on a CD player changer PLAY Starts playing kaa Returns to the beginning of the current or previous track P Skips to the beginning of the next track STOP Stops playing PAUSE Pauses playing To
118. utput level 21 dBm to 15 dBm PHONO 70 dB 78 dB at REC OUT CD TAPE MD TV SOUND DBS VCR 1 CDR VCR 2 VIDEO DVD 92 dB 80 dB PHONO 20 Hz to 20 kHz 1 dB CD TAPE MD TV SOUND DBS VCR 1 CDR VCR 2 VIDEO DVD 20 Hz to 100 kHz 1 dB 3 dB 1 0 dB 20 Hz to 20 kHz 6 1 0 dB at 100 Hz Volume control at 30 dB 100 Hz 1 kHz 10 kHz 10 dB 2 dB Center frequencies Control range TV SOUND DBS VCR 1 CDR VCR 2 VIDEO DVD TV SOUND DBS VCR 1 VIDEO DVD Y luminance C chrominance burst 1 V p p 75 Q 1 V p p 75 Q 0 286 V p p 75 Q VCR 1 CDR VCR 2 MONITOR OUT VCR 1 MONITOR OUT Y luminance C chrominance burst 1 V p p 75 Q 1 V p p 75 Q 0 286 V p p 75 Q Negative 45 dB NTSC 53 FM tuner IHF Tuning Range Usable Sensitivity 50 dB Quieting Sensitivity Signal to Noise Ratio IHF A weighted Total Harmonic Distortion Stereo Separation at REC OUT Alternate Channel Selectivity Frequency Response AM tuner Tuning Range Usable Sensitivity Signal to Noise Ratio General Power Requirements Power Consumption Dimensions W x H x D Mass 54 87 5 MHz to 108 0 MHz Monaural 12 8 dBf 1 2 uV 75 Q Monaural 21 3 dBf 3 2 uV 75 Q Stereo 41 3 dBf 31 5 uV 75 Q Monaural 78 dB at 85 dBf Stereo 73 dB at 85 dBf Monaural 0 4 at 1 kHz Stereo 0 6 at 1 kHz 35 dB at 1 kHz 45 dB 400 kHz 30 Hz to 15 kHz 0 5 dB 3 dB 530
119. which to use Press SPEAKERS 1 or SPEAKERS 2 to select PARN the speaker to use 1 2 e Each time you press the button the lamp on C C the respective button turns on and off When the lamp on either button lights up the respective speakers are activated IMPORTANT You can activate two pairs of the front speakers at the same time only when the SPEAKER LOAD SELECTOR on the rear panel is set to HIGH and when no signals are sent to the center and rear speakers Otherwise activating one pair of the speakers deactivates the other Note If you use any of the DSP modes other than the 3D PHONIC modes with both front speakers activated the speakers connected to the FRONT SPEAKERS terminals are deactivated 11 Listening only with headphones You can listen with the headphones without deactivating both pairs of speakers however if you want to use the HEADPHONE mode see below you must turn off both pairs of speakers 1 Connect a pair of headphones to the PHONES jack on the front panel Press SPEAKERS 1 and or 2 so that no lamps on the buttons are turned on This cancels the surround mode or DSP mode currently selected and activates the HEADPHONE mode see below e The HEAD PHONE indicator lights up on the display N HEADPHONE mode This mode can reproduce the LFE channel signals mixing them with the front channel signals So you will not miss the subwoofer sounds even if you listen to a so

Download Pdf Manuals

image

Related Search

Related Contents

4 ホールリム付け式バス混合水栓 埋込部 / 化粧部  Harbor Freight Tools 1 Horsepower Wood Shaper Product manual  Sony XS-GS1621C Marketing Specifications    Grundfos ALPHA  2016 Nissan Frontier  ProFire2 press  Notice d'utilisation - Service après vente  Betriebsanleitung Plattformwaage  

Copyright © All rights reserved.
Failed to retrieve file