Yamaha RX-V495 5.1 Channels Receiver
Contents
1. TIME LEVEL SET MENU YAMAHA When using the remote control transmitter Press AMP lt TUNERS gt on the component selector When controlling an audio visual component tape deck MD recorder CD player DVD LD player etc press the button on the component selector TAPE MD CD DVD LD etc for the component you want to control See SETUP CODES on page 53 1 Set VOLUME to the oo position Front panel VOLUME 2 Turn the power on Front panel Remote control POWER STANCETEN 07 7 p 28 3 Select the desired program source by using INPUT Turn on the TV monitor for video sources Front panel Remote control INPUT VCR V AUX TV DBS DVD LD CD TUNER PHONO CD TUNER TAPE MD The name of the selected program source will appear on the display To play a tape or an MD Press TAPE MD MON EXT DECODER on the front panel or TAPE MD on the remote control transmitter so that the TAPE MD MON indicator lights up on the display Front panel TAPE MD MO EXT DECODER To use a decoder connected to the EXTERNAL DECODER INPUT terminals Press TAPE MD MON EXT DECODER once or more on the front panel or EXT DEC on the remote control transmitter so that EXT DECDR appears on the display 42. Dolby Pro Logic Surround Dolby Pro Logic Surround has been used in movie theaters since the mid seventies It has also been available in home entertainment systems since the late eighties and continues to be a popular format for home theater systems It uses four discrete channels and five speakers to reproduce realistic and dynamic sound effects two main channels left and right a center channel for dialog and a rear channel for special sound effects The rear channel reproduces sound within a narrow frequency range Dolby Digital The built in Dolby Digital decoder leads you into a totally new sound experience Dolby Digital is a new generation of multi channel digital audio technology or the newest spatial sound processing format developed for 35 mm film movies by employing a new kind of low bit rate audio coding Dolby Digital is a digital surround sound system that provides completely independent multi channel audio to listeners In multi channel form Dolby Digital provides 5 full range channels in what is sometimes referred to as a 3 2 configuration three front channels left center and right plus two surround channels A sixth bass only effect channel is also provided for output of LFE low frequency effect or low bass effects that are independent of other channels This channel is counted as 0 1 thus giving rise to the term 5 1 channels in total To make the listening experience even more enjoyable this unit
3. Lav trys III LL 2 Press SET MENU once or more to select the function CNTR on the display 4 Repeat steps 2 and 3 to change the setting for REAR MAIN BASS and or M LVL in the same Front panel Remote control way LEVEL MENU MENU C T or SET MENU 24 SPEAKER BALANCE ADJUSTMENT This procedure lets you adjust the sound output level balance between the main center and rear speakers by using the built in test tone generator When this adjustment is performed the sound output level heard at the listening position will be the same from each speaker This is important for the best performance of the digital sound field processor the Dolby Digital decoder and the Dolby Pro Logic Surround decoder The adjustment of each speaker output level should be done at your listening position with the remote control transmitter After completing the adjustment of the output level for each speaker use VOLUME v on the remote control transmitter at your listening position to check if the adjustments are satisfactory 2 1 TEST A B C D E EFFECT LE cH CH ayy S RETURN G2 VOR REC INPUT YAMAHA sarunai souno av neceven RE pr PRG TIME LEVEL SET MENU YAMA
4. YAMAHA RX V4A95 Natural Sound AV Receiver Ampli Tuner Audio Video OWNER S MANUAL MODE D EMPLOI SAFETY INSTRUCTIONS 6A RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE Read Instructions All the safety and operating instructions should be read before the unit is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the unit and in the operating instructions should be adhered to Follow Instructions All operating and other instructions should be followed Water and Moisture The unit should not be used near water for example n
5. discrete digital sound processing expands the realism that the original movie possesses LD and DVD are home audio video program source that could benefit from Dolby Digital In the near future Dolby Digital will also be applied to DBS CATV and HDTV The ongoing release of Dolby Stereo Digital theatrical films now underway will provide an immediate source of Dolby Digital encoded video software DO Es DIGITAL Manufactured under license from Dolby Laboratories Licensing Corporation DOLBY PRO LOGIC and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation Copyright 1992 Dolby Laboratories Inc All rights reserved CINEMA DSP Dolby Surround DSP The Dolby Surround sound system shows its full ability in a large movie theater because movie sounds are originally designed to be reproduced in a large movie theater using many speakers It is difficult to create a sound environment similar to that of a movie theater in your listening room because the room size materials of inside walls the number of speakers etc of your listening room are very different from those of a movie theater The following original functions make the surround sound effect of Dolby Digital become the most suitable for your audio system and the listening conditions YAMAHA DSP technology made it possible to present you with nearly the same sound experience as that of a large movie theater in your listening room b
6. includes a number of exclusive digitally created listening environments known as digital sound fields Choosing a sound field program is like transporting yourself to such venues as an outdoor arena a European church or a cozy jazz club Take some time now to read more about these features and enjoy the new experiences this unit brings to your home theater Furthermore our technicians armed with sophisticated measuring equipment have even made it possible to capture the acoustics of a variety of actual concert halls theaters etc from around the world to allow you to accurately re create any one of these live performance environments all in your own home Most video tapes and laser discs include Dolby Pro Logic Surround encoding as do many TV and cable broadcasts The Dolby Pro Logic Surround decoder built into this unit employs a digital signal processing system that stabilizes each channel for even more accurate sound positioning than is available with standard analog processors Compared to Dolby Pro Logic which is referred to a 3 1 system left front center right front and just one surround channel Dolby Digital features two surround channels called stereo or split surrounds each offering the same full range fidelity as the three front channels Sound of wide dynamic range reproduced by the 5 full range channels provides listeners with excitement that has never been experienced before Precise sound orientation by
7. to be distributed from other channels are output from the SUBWOOFER OUTPUT terminal When the LARGE position is selected for MAIN in the SW position no signal is distributed from the main channels to the SUBWOOFER OUTPUT terminal however in the BOTH position low bass signals from the main channels are output to both the main speakers and the SUBWOOFER OUTPUT terminal M LVL MAIN LEVEL Choices NRML NORMAL 10 dB Preset position NRML NORMAL NRML NORMAL 10 dB Normally select this position Select this position if the sound output from the main speakers is too loud and cannot be balanced with the sound output from the center and rear speakers In this position the sound output from the main speakers is attenuated 23 ADJUSTING METHOD Adjustments should be made while watching the information on this unit s display 1 2 _ VX When adjusting with the remote control transmitter press 3 Press or once or more to select the setting you AMP lt TUNER gt on the component selector on the remote want control transmitter AMP Front panel Remote control wm P 1 Turn the power on Front panel Remote control POWER Y STANDBY ON or I WET EIS ECMO I
8. 1 3 4 etc on the rear panel connections can be made easily by making sure to connect the output or input terminals of each component to the same numbered terminals of this unit gt SWITCHED AC OUTLET S U S A Canada Singapore China and General models TE 2 SWITCHED OUTLETS Australia model 1 SWITCHED OUTLET Use these to connect the power cords from your components to DVD player this unit Turntable Monitor TV LD player etc The power to the SWITCHED AC OUTLET S is controlled by this unit s STANDBY ON or the provided remote control transmitter s POWER These outlets will supply power to any component whenever this unit is turned on The maximum power total power consumption of components that can be connected to the SWITCHED AC OUTLET S is 100 watts OUTPUT AUDIO OUT VIDEO OUT VIDEO IN U S A model IMPEDANCE SELECTOR SET BEFORE POWER ON EXTERNAL DECODER INPUT DIBITAL SIGNAL COAXIAL rca DVD LD DVD Lp TV DBS OUTPUT gt To AC outlet AUDIO OUT AUDIO OUT VIDEO OUT AUDIO IN VIDEO OUT CD player Tape
9. 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EXAMPLE OF ANTENNA GROUNDING ANTENNA LEAD IN WIRE MAST GROUND CLAMP ANTENNA DISCHARGE UNIT Note to CATV sysiem installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS ee POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE FCC INFORMATION for US customers only 1 IMPORTANT NOTICE DO NOT MODIFY THIS UNIT This product when installed as indicated in the instructions contained in this manual meets FCC requirements Modifications not expressly approved by Yamaha may void your authority granted by the FCC to use the product 2 IMPORTANT When connecting this product to accessories and or another product use only high quality shielded cabl
10. For a DVD LD or TV DBS source the current input mode is also shown To change the input mode for the DVD LD or TV DBS source press INPUT MODE or the button that you have pressed to select the program source in step 3 on the remote control transmitter once or more until the desired input mode AUTO or ANALOG is shown on the display See page 30 for details on switching the input mode Front panel Remote control CD TUNER TAPE MD INPUT MODE F o oie Input mode 5 Select the main speakers to be used Front panel SPEAKERS A B I FA If you use two main speaker systems press both A and B 6 Play the source See page 32 for detailed information on tuning 7 Adjust the volume to the desired output level Front panel Remote control VOLUME 8 If desired adjust BASS TREBLE BALANCE etc and use the digital sound field processor see page 38 BASS Turn this control clockwise to increase or counterclockwise to decrease the low frequency response TREBLE Turn this control clockwise to increase or counterclockwise to decrease the high frequency response BALANCE Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions Front panel BASS TREBLE BALANCE These controls are only ef
11. goes off ON AUTO TUNING AUTI 0 OT ATS cights p 3 Tune in manually to the desired station 3 To tune in to a higher frequency press the UP side of Front panel TUNING once DOWN TUNING UP To tune in to a lower frequency press the DOWN side DH of TUNING once Front panel DOWN TUNING up To continue the tuning search press and hold the button Note If you tune in manually to an FM station it will be automatically If the station where the tuning search stops is not the received in monaural mode to increase the signal quality desired one press once more If the tuning search does not stop at the desired station because the signal from the station is weak take the manual tuning procedure 32 MANUAL PRESET TUNING This unit can store station frequencies to be selected by tuning With this function you can recall any desired station simply by selecting the preset station number with which it was stored Up to 40 stations 8 stations x 5 groups can be stored 2 4 3 YAMAHA warunki souno av neceiven To store stations 1 Tune in to the desired station See the previous page for the tuning procedure 2 Press A B C D E once or more to select the desired group A to E of preset stations and confirm it on the displ
12. serial number is located on the rear of the unit Retain this Owner s Manual in a safe place for future reference WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE FOR CANADIAN CUSTOMERS To prevent electric shock match wide blade of plug to wide slot and fully insert This Class B digital apparatus complies with Canadian ICES 003 FEATURES OF SOUND EFFECTS Introduction Welcome to the exciting world of digital home entertainment This unit is one of the most complete and advanced AV receivers available Some of the more advanced features may not be familiar to you but they are easy to use State of the art technologies such as Dolby Digital and Digital Theater Systems DTS may be new to your home but you have probably experienced the amazing realism they bring to feature films in theaters around the world Digital Sound Field Processing What is it that makes live music so good Today s advanced sound reproduction technology lets you get extremely close to the sound of a live performance but the chances are that you ll still notice something missing the acoustic environment of the live concert hall Extensive research into the exact nature of the sonic reflections that create the ambience of a large hall has made it possible for YAMAHA engineers to bring you this same sound to your listening room so you ll feel all the sound of a live concert
13. set to the AUTO position 1 COAXIAL terminal 2 OPTICAL terminal 3 Analog terminal All digital audio signal input terminals are applicable to sampling frequencies of 32 kHz 44 1 kHz and 48 kHz If your LD player has Dolby Digital RF signal output terminal and not digital signal output use the RF demodulator separate purchase TV DBS tuner Ld ANALOG OUT Ld OPTICAL DIGITAL OUT U S A model 75 UNBAL FM ANT SUB WOOFER we DIGITAL SIGNAL OPTICAL DVD LD TVYDBS VIDEO SIGNAL AM ANT Ei 00000 DVD LD _TV DBS Bi ag REC TAPE MD PHONO a AUDIO SIGNAL 8 GOO 906 00 OOS 000 DVD LD TV DBS 18 CONNECTING SPEAKERS Main speakers A Main speakers B Left SPEAKERS Rear speakers Subwoofer system Center speaker Note Subwoofer connection Use speakers with the specified impedance shown on the You may wish to add a subwoofer to reinforce low frequencies rear panel of this unit or to output low bass sound from the subwoofer channel If you have a subwoofer with built in amplifier including the YAMAHA Active Servo Processing Subwoofer System connect Mai
14. the TIME LEVEL mode 20 These buttons are used to adjust the settings of the SET MENU mode and the TIME LEVEL mode In the TIME LEVEL mode press to increase the delay time or speaker output level Press to decrease the delay time or speaker output level a SET MENU Press this button to select functions in tne SET MENU mode PROGRAM selector Press lt or gt to select the DSP program The name of the selected program appears on the display 23 EFFECT This button switches on and off the output from the center and rear speakers so that the sound becomes the normal 2 channel Even if the output from the center and rear speakers is off when the Dolby Digital is decoded the signals on all channels are distributed to the main channels and output from the main speakers 24 VIDEO AUX terminals Connect an auxiliary video or audio input source unit such as a camcorder to these terminals The source connected to these terminals can be selected by INPUT DISPLAY PANEL PRESET 1 la FM I AUTO TUNING Multi information display This displays various information for example the station frequency preset station number and name of the selected program source 2 MEMORY indicator When MEMORY is pressed this indicator flashes for about five seconds During this period the displayed station can be stored in the memory AUTO TUNING indicator This lights up when the unit is in the automatic tu
15. unit with digital outputs 17 CONNECTING TO DIGITAL COAXIAL AND OR OPTICAL TERMINALS If your DVD LD player TV DBS tuner etc are equipped with coaxial or optical digital audio signal output terminals they can be connected to this units COAXIAL and or OPTICAL digital signal input terminals To make a connection between optical digital audio signal terminals remove the cover from each terminal and then connect them by using a commercially available optical fiber cable that conforms to EIAJ standards Other cables might not function correctly Even if you connect an audio video unit to the COAXIAL or OPTICAL terminal of this unit you must keep the unit connected with the same named analog audio signal terminals of this unit because a digital signal cannot be recorded by a tape deck MD recorder or VCR connected to this unit You can easily switch the selection of input signals between digital and analog See page 30 for details DVD or LD player OPTICAL DIGITAL OUT I COAXIAL DIGITAL OUT I ANALOG OUT Notes When connecting an audio video unit to both the digital and analog terminals of this unit make sure to connect between terminals of the same name Be sure to attach the covers when the OPTICAL terminals are not being used in order to protect them from dust The input signal from the DVD LD input terminals is selected in the following order of priority with the input mode
16. B AQMIN SPEAKER A B BQMIN SPEAKER c 6 Ri jo ER MAN A OR B BQMIN SPEAKER B IBQMIN SPEAKER OH CENTER 82MIN SPEAKER REAR SQMIN SPEAKER C OUTLETS SWITCHED 10 TOTAL Select the position whose requirements your speaker system meets Main Center Rear Main Center Rear B Upper position If you use one pair of main speakers the impedance of each speaker must be 4 Q or higher If you use two pairs of main speakers the impedance of each speaker must be 8 Q or higher The impedance of the speaker must be 6 Q or higher The impedance of each speaker must be 6 Q or higher H Lower position If you use one pair of main speakers the impedance of each speaker must be 8 Q or higher If you use two pairs of main speakers the impedance of each speaker must be 16 Q or higher lt Canada model only gt The impedance of each speaker must be 8 or higher The impedance of the speaker must be 8 Q or higher The impedance of each speaker must be 8 or higher 21 ANTENNA CONNECTIONS Each antenna should be correctly connected to the designated terminals referring to the following diagram Both AM and FM indoor antennas are included with this unit In general these antennas will probably provide sufficient signal strength Nevertheless a properly installed outdoor antenna will give clearer reception than an
17. EFFECTS nnen 7 CONTROLS AND THEIR FUNCTIONS eee 9 Preparation SPEAKER SETUP seat 14 GONNESTIONS era en tied Nearest tare ata 16 ADJUSTMENTS BEFORE USING THIS UNIT nne 23 Basic Operation BASIC OPERATIONS u nannsnnsnennsnnnennnnnnnn nenn nennen 28 TUNING OPERATIONS uursunssnnnsnnnennennnennnnnnnenn nn 32 SETTING THE SLEEP TIMER cece nennen 37 Information about DSP USING THE DIGITAL SOUND FIELD PROCESSOR DSP i ccictivniaclcntiativiadtins 38 Advanced Information ADJUSTMENTS IN THE SET MENU MODE eee 44 Remote Control Transmitter REMOTE CONTROL TRANSMITTER eenen 46 SETUP CODES ere rent 53 TROUBLESHOOTING 2uurs20rsnnennnennnennnennnn nennen 54 SPEGIFICATIONS a fera rires 57 LIST OF MANUFACTURER S CODES 113 10 11 12 13 14 15 CAUTION READ THIS BEFORE OPERATING YOUR UNIT To assure the finest performance please read this manual carefully Keep it in a safe place for future reference Install this unit in a cool dry clean place away from windows heat sources sources of excessive vibration dust moisture and cold Avoid sources of humming transformers motors To prevent fire or electrical shock do not expose the unit to rain or water Never open the cabinet If something drops into the set contact your dealer Do not use force on switches controls or connection wires When moving the unit first disconnect th
18. HA Press AMP lt TUNER gt on the component selector on the 2 remote control transmitter Turn the power on AMP O Front panel Remote control POWER STANDBY ON o i7 1 Set VOLUME to the co position 3 Select the main speakers to be used Front panel VOLUME Front panel SPEAKERS A B D2 If you use two main speaker systems press both A and B 25 Front panel TREBLE BALANCE o o 4 Set BASS TREBLE and BALANCE to the 0 position 5 Press TEST so that TEST LEFT appears on the display Remote control TEST 26 6 Turn up the volume Remote control You will hear a test tone like pink noise from each speaker for about two seconds in following order left main speaker center speaker right main speaker right rear speaker and left rear speaker The display changes as shown below N fe L i L E fe Main L Y 7 E 7 E NTH Center Y TEST WIGHT Main R Y BEE Re Y 7 iE FE l if Rear L If the function CNTR in the SET MENU mode is set to the NONE position you will hear the center channel test tone from the left and right main speakers 7 Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same Front panel BALANCE o 8 Adjust the sound output levels of the center speake
19. Setup buttons 1 These buttons function as play stop skip etc for operating the component They only function when TAPE MD CD DVD LD VCR or TV on the component selector has been pressed 2 These buttons are for adjusting various settings They only function when AMP lt TUNER gt DVD MENU or CBL DBS on the component selector has been pressed 13 SPEAKER SETUP SPEAKERS TO BE USED This unit is designed to provide the best sound field quality with a 5 speaker configuration using main speakers rear speakers and a center speaker The main speakers are used for the main source sound plus the effect sounds They will probably be the speakers from your present stereo system The rear speakers are used for the effect and surround sounds and the center speaker is for the center sounds dialog vocals etc If for some reason it is not practical to use a center speaker you can do without it Best results however are obtained with the full system The main speakers should be high performance models and have enough power handling capacity to accept the maximum output of your audio system The other speakers do not have to be equal to the main speakers For precise sound localization however it is ideal to use high performance models that can reproduce sounds over the full range for the center speaker and the rear speakers SPEAKER CONFIGURATION 5 Speaker Configuration This configuration is the most effective and re
20. als to speakers suitable for your audio system When speaker connections have all been completed select the proper setting for each function to make the best use of your speaker system See ADJUSTMENTS IN THE SET MENU MODE on page 44 1 CNTR CENTER SPEAKER 4 BASS LFE BASS OUT 2 REAR REAR SPEAKERS 5 M LVL MAIN LEVEL 3 MAIN MAIN SPEAKERS DESCRIPTION OF EACH FUNCTION CNTR CENTER SPEAKER BASS LFE BASS OUT Choices LARGE SMALL NONE Preset position LARGE LARGE Select this position when your center speaker is approximately the same size as the main speakers Select this position when you use a center speaker that is smaller than the main speakers In this position low bass signals below 90 Hz on the center channel are output from the main speakers or the SUBWOOFER OUTPUT terminal if the SMALL position is selected for MAIN and the SW position is selected for BASS Select this position when you do not have a center speaker The center channel sound will be output from the left and right main speakers SMALL NONE REAR REAR SPEAKERS Choices LARGE SMALL Preset position LARGE LARGE Select this position if your rear speakers have high ability for bass reproduction or a subwoofer is connected to the rear speaker in parallel In this position full range signals are output from the rear speakers Select this position if your r
21. asures do not produce satisfac tory results please contact the local retailer authorized to distribute this type of product If you can not locate the appropriate retailer please contact Yamaha Electronics Corp U S A 6660 Orangethorpe Ave Buena Park CA 90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association s Consumer Since hearing damage from loud sounds is often Electronics Group want you to get the most out of your undetectable until it is too late YAMAHA and the 4 equipment by playing it at a safe level One that lets the sound Electronic Industries Associations Consumer d come through loud and clear without annoying blaring or Electronics Group recommend you to avoid bs distortion and most importantly without affecting your prolonged exposure from excessive volume levels ne sensitive hearing SUPPLIED ACCESSORIES e After unpacking check that the following parts are included ACCESSOIRES FOURNIS e Apr s le d ballage v rifier que les pi ces suivantes sont incluses Remote control transmitter T l commande e Indoor FM Antenna Antenne FM int rieure e e AM Loop Antenna Cadre antenne AM e OOO OOD EE Ogre 4 gt m S ES g lt oO N rn N oO oO e Antenna adapt
22. ay Front panel A B C D E 7 PRESET v gt p 5 3 Press MEMORY so that the MEMORY indicator flashes for about five seconds Front panel Sy MAN x MEMORY 2 vain Flashes 4 Select the preset station number with which you want to store the station before the MEMORY indicator goes off from the display Front panel The displayed station has been stored as A1 In the same way store other stations as A2 A3 A8 You can store more stations as preset station numbers in other groups in the same way by selecting another group in step 2 33
23. commended one When playing back a source using the DSP program DOLBY PRO LOGIC DOLBY DIGITAL DOLBY PRO LOGIC ENHANCED DOLBY DIGITAL ENHANCED 70 mm MOVIE THEATER DIGITAL MOVIE THEATER MONO MOVIE or TV SPORTS or when playing back a source which contains center channel signals dialog vocals etc using any DSP program that is Dolby Digital decoded conversations will be output from the center speaker and the ambience will be excellent Note Set the CNTR CENTER SPEAKER mode to the LARGE or SMALL position See page 23 for details Main L Center Main R ZI Dialog Se Surround sound 14 Use of a subwoofer expands your sound field It is also possible to further expand your system with the addition of a subwoofer and amplifier The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels but also for reproducing the LFE low frequency effect sound with high fidelity when playing back a source that is Dolby Digital decoded You may wish to choose the convenience of a YAMAHA Active Servo Processing Subwoofer System which has its own built in power amplifier 4 Speaker Configuration The center speaker is not used in this configuration When playing back a source using the DSP program DOLBY PRO LOGIC DOLBY DIGITAL DOLBY PRO LOGIC ENHANCED DOLBY DIGITAL ENHANCED 70 mm MOVIE THEATER DIGITAL MOVIE THEATER MONO MOVIE or TV SPORTS or when playing back a source w
24. ctor has been pressed the remote control transmitter is set to operate that component 2 POWER When you have preset the code for a YAMAHA component this button switches between the power on and standby mode When you have preset the code for another manufacturer s component this button turns on that component if it has a remote control transmitter with a power button It only functions when AMP lt TUNER3 gt TAPE MD CD DVD LD or DVD MENU on the component selector has been pressed TEST Press this button to output the test tone for each speaker It only functions when AMP lt TUNER gt on the component selector has been pressed TUNER TAPE MD TV DBS O A B C D E PRESET These buttons are used to select a preset station They only function when AMP lt TUNER gt on the component selector has been pressed O MUTE Press this button to mute the sound DISC SKIP PRESET VOLUME These buttons are used to adjust the volume A Turns up the volume v Turns down the volume 7 SLEEP This button is used to set the SLEEP timer pre PRG These buttons are used to select a DSP program They only function when AMP lt TUNER gt on the component selector has been pressed Indicator This flashes in red when a button on the remote control transmitter is pressed When it flashes rapidly several times press the selected button again TIME LEVEL SET MENU YAMAHA I
25. deck TV DBS tuner VCR MD recorder etc Video cassette recorder GND terminal for turntable use Connecting the ground earth wire of the turntable to the GND terminal will normally minimize hum but in some cases better results may be obtained with the ground wire disconnected 16 CONNECTING TO VIDEO AUX TERMINALS ON THE FRONT PANEL These terminals are used to connect any video input source such as a camcorder to this unit VIDEO AUX gt AUDIO OUT R AUDIO OUT L VIDEO OUT VB oui AUDIO OUT L Camcorder CONNECTING TO AN EXTERNAL DECODER When using the DTS or other decoder with 6 channel discrete outputs connect the 6CH DISCRETE OUTPUT terminals of the decoder to the EXTERNAL DECODER INPUT terminals of this unit r 6CH DISCRETE OUTPUT DTS or other decoder with 6 channel discrete outputs MAIN CENTER SURROUND DIGITAL IN Ne so Le si A U S A model DIGITAL SIGNAL COAXIAL OPTICAL DVD LD DVD LD TV DBS eo oa VIDEO SIGNAL MONITOR OUT 75 UNBAL Dod Pod AUDIO SIGNAL Oc 1 Ba T PLAY TAPE MD DIGITAL OUT VIDEO OUT AUDIO OUT DVD player LD player or other
26. e observed If these wires are reversed the sound will be unnatural and lack bass Caution Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit This could damage the unit and or speakers Connecting to the MAIN SPEAKERS terminals Red positive Black negative Unscrew the knob 2 Remove approx 5 mm 1 4 of insulation from each of the speaker wires and insert the bare wire into the terminal 3 Tighten the knob to secure the wire Banana plug connections are also possible except for the Singapore model Simply insert the banana plug connector into the corresponding terminal 20 Connecting to the REAR and CENTER SPEAKERS terminals Red positive Black negative Press the tab 2 Remove approx 5 mm 1 4 of insulation from each of the speaker wires and insert the bare wire into the terminal 3 Release the tab to secure the wire IMPEDANCE SELECTOR SWITCH WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power to this unit is on otherwise this unit may be damaged If this unit fails to turn on when the STANDBY ON switch is pressed the IMPEDANCE SELECTOR switch may not be fully set to either end If so set the switch to either end fully when this unit is in the standby mode IMPEDANCE SELECTOR U S A model IMPEDANCE SELECTOR SET BEFORE POWER ON MAIN A OR
27. e power plug and the wires connected to other equipment Never pull the wires themselves The openings on the unit cover assure proper ventilation of the unit If these openings are obstructed the temperature inside the unit will rise rapidly Therefore avoid placing objects against these openings and install the unit in a well ventilated area to prevent fire and damage lt Singapore model only gt Be sure to allow a space of at least 20 cm behind 20 cm on the both sides and 30 cm above the top panel of the unit to prevent fire and damage The voltage used must be the same as that specified on this unit Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified Digital signals generated by this unit may interfere with other equipment such as tuners receivers or TVs Move this unit farther away from such equipment if interference is observed Always set the VOLUME control to oo before starting the audio source play Increase the volume gradually to an appropriate level after playback has been started Do not attempt to clean the unit with chemical solvents this might damage the finish Use a clean dry cloth Be sure to read the TROUBLESHOOTING section regarding common operating errors before concluding that the unit is faulty When not plannin
28. e watching a movie in the newest Dolby Stereo Digital theater This will be the most ideal home theater sound at the present time This combination is available when the DOLBY PRO LOGIC ENHANCED DOLBY DIGITAL ENHANCED 70 mm MOVIE THEATER DIGITAL MOVIE THEATER or TV SPORTS sound field program is selected and the input signal of source is encoded with Dolby Digital sound except in 2 channel CONTROLS AND THEIR FUNCTIONS FRONT PANEL YAl MAHA NATURAL SOUND AV RECEIVER CINEMA DSF OX rus INPUT VER V AUK TW D8S DVO LD CD TUNER PHONO STANDBY ON ES 1 1 1 TAPE MD MON EXT DECODER CH BASS TREBLE PHONES 2a 0 STANDBY ON Press this switch to turn on the power to this unit Press it again to set this unit to the standby mode Standby mode In this state this unit consumes a very small quantity of power to receive infrared signals from the remote control transmitter Remote control sensor This receives signals from the remote control transmitter Display This shows various information Refer to page 11 for details 0 MEMORY MAN L AUTO FM Press this button to store the broadcasting stations When this button is pressed and held f
29. ear a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool etc Carts and Stands The unit should be used only with a cart or stand that is recommended by the manufacturer A unit and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the unit and cart combination to overturn ZU Wall or Ceiling Mounting The unit should be mounted to a wall or ceiling only as recommended by the manufacturer 10 11 12 13 14 15 16 17 18 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example the unit should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators stoves or other appliances that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where t
30. ear speakers do not have high ability for bass reproduction In this position low bass signals below 90 Hz on the rear channels are output from the SUBWOOFER OUTPUT terminal or the main speakers if the MAIN position is selected for BASS SMALL MAIN MAIN SPEAKERS Choices LARGE SMALL Preset position LARGE LARGE Select this position if your main speakers have high ability for bass reproduction In this position full range signals present on the main channels are output from the main speakers Select this position if your main speakers do not have high ability for bass reproduction However if your system does not include a subwoofer do not select this position In this position low bass signals below 90 Hz on the main channels are output from the SUBWOOFER OUTPUT terminal if the SW or BOTH position is selected for BASS SMALL Choices SW MAIN BOTH Preset position SW MAIN Select this position if your system does not include a subwoofer In this position full range signals present on the main channels signals from the LFE channel and other low bass signals that are selected for CNTR to MAIN to be distributed from other channels are output from the main speakers SW BOTH Select either the SW or BOTH position if your system includes a subwoofer In either position signals on the LFE channel and other low bass signals that are selected for CNTR to MAIN
31. er U S A and Canada models only Adaptateur d antenne Mod les pour les Etats Unis et le Canada seulement e O OO OLOO A B C D E DISC SKIP PREBET ea e Batteries size AAA R6 UM 4 Piles taille AAA R6 UM 4 e VCR REC TV INPUT TIME LEVEL SET MENU YAMAHA FEATURES 5 Channel Power Amplification Minimum RMS Output Power lt 0 04 THD 20 Hz 20 kHz gt Main 60 W 60 W 8 Q Center 60 W 8 Q Rear 60 W 60 W 8 Q lt 0 07 THD 1 kHz gt Main 70 W 70 W 8 Q Center 70 W 8 Q Rear 70 W 70 W 8 Q Digital Sound Field Processor Dolby Digital Decoder Dolby Pro Logic Surround Decoder CINEMA DSP Theater like Sound Experience by the Combination of Dolby Surround and YAMAHA DSP Technology 6 Channel External Decoder Input for DTS and other future formats Automatic Input Balance Control for Dolby Pro Logic Surround Test Tone Generator for Easier Speaker Balance Adjustment Speaker Output Mode Changing Capability 40 Station Random Access Preset Tuning Automatic Preset Tuning Preset Station Shifting Capability Preset Editing Video Signal Input Output Capability SLEEP Timer Universal Remote Control Transmitter with Preset Manufacturer Codes CONTENTS SUPPLIED ACCESSORIES sacs cessesesccedigcacsartnccctsnenntaaes 4 FEATURES ae ae es 5 CAUTION Sarnen 6 Introduction FEATURES OF SOUND
32. es Cable s supplied with this product MUST be used Follow all installation instruc tions Failure to follow instructions could void your FCC authorization to use this product in the USA 3 NOTE This product has been tested and found to comply with the requirements listed in FCC Regula tions Part 15 for Class B digital devices Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices This equipment generates uses radio frequencies and if not installed and used according to the instructions found in the users manual may cause interference harmful to the operation of other electronic devices Compliance with FCC regulations does not guarantee that interference will not occur in all installations If this product is found to be the source of interference which can be determined by turning the unit OFF and ON please try to eliminate the problem by using one of the following measures Relocate either this product or the device that is being affected by the interference Utilize power outlets that are on different branch circuit breaker or fuse circuits or install AC line filter s In the case of radio or TV interference relocate reorient the antenna If the antenna lead in is 300 ohm ribbon lead change the lead in to coaxial type cable If these corrective me
33. fective for the sound from the main speakers When you have finished using this unit Press STANDBY ON on the front panel again or POWER on the remote control transmitter to set this unit to the standby mode 29 Notes on using INPUT The audio source selected by INPUT will not be played if the TAPE MD MON indicator lights up or if EXT DECDR is displayed e If you select INPUT for a video source without canceling the selection of TAPE MD MON EXT DECODER on the front panel or TAPE MD or EXT DEC on the remote control transmitter the play back result will be a video image from the video source and the sound from the audio source selected by TAPE MD MON EXT DECODER on the front panel or TAPE MD or EXT DEC on the remote control transmitter Once you start playing a video source the video image will not be interrupted even if INPUT for an audio source is selected When you select a program source by using INPUT the DSP program or no DSP program that was being used when the same program source was selected the last time will be automatically recalled 30 Switching the input mode for DVD LD and TV DBS This unit allows you to switch the input mode only for those sources connected to the DVD LD and TV DBS input terminals on the rear panel of this unit that input two or three types of signal The following two input modes are provided AUTO Fora source connected to the DVD LD inp
34. g to use this unit for long periods of time ie vacation etc disconnect the AC power plug from the wall outlet To prevent lightning damage disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm Grounding or polarization Precautions should be taken so that the grounding or polarization of an appliance is not defeated AC outlet Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide Voltage Selector China and General Models only The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply Voltages are 110 120 220 240 V AC 50 60 Hz This unit is not disconnected from the AC power source as long as it is connected to the wall outlet even if this unit itself is turned off This state is called the standby mode In this state this unit is designed to consume a very small quantity of power FREQUENCY STEP switch China and General Models only Because the interstation frequency spacing differs in different areas set the FREQUENCY STEP switch located at the rear according to the frequency spacing in your area Before setting this switch disconnect the AC power plug of this unit from the AC outlet IMPORTANT Please record the serial number of this unit in the space below MODEL Serial No The
35. hey exit from the unit Cleaning The unit should be cleaned only as recommended by the manufacturer Nonuse Periods The power cord of the unit should be unplugged from the outlet when left unused for a long period of time Object and Liquid Entry Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit Damage Requiring Service The unit should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the unit or C The unit has been exposed to rain or D The unit does not appear to operate normally or exhibits a marked change in performance or E The unit has been dropped or the cabinet damaged Servicing The user should not attempt to service the unit beyond those means described in the operating instructions All other servicing should be referred to qualified service personnel Power Lines An outdoor antenna should be located away from power lines Grounding or Polarization Precautions should be taken so that the grounding or polarization is not defeated 19 For US customers only Outdoor Antenna Grounding If an outside antenna is connected to this unit be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA
36. hich contains center channel signals dialog vocals etc using any DSP program that is Dolby Digital decoded the center sound is output from the left and the right main speakers However the sound effect of other programs will be the same as that of the 5 speaker configuration Note Be sure to set the CNTR CENTER SPEAKER mode to the NONE position See page 23 for details mec ig Ne De A e fs me BE ae Whee te SPEAKER PLACEMENT Refer to the following diagram when you place the speakers Main The position of your present stereo speaker system Main speaker R Rear Behind your listening position facing slightly inward Nearly 1 8 m approx 6 feet up from the floor lt i Rear Center Precisely between the main speakers To avoid speaker R interference with TV sets use a magnetically shielded speaker Subwoofer The position of the subwoofer is not as critical because low bass tones are not highly directional 15 CONNECTIONS Never plug in this unit and other components until all connections have been completed CONNECTIONS WITH OTHER COMPONENTS When making connections between this unit and other components be sure all connections are made correctly that is to say L left to L R right to R to and to Also refer to the owner s manual for each component to be connected to this unit If you have YAMAHA components numbered as
37. indoor one If you experience poor reception quality an outdoor antenna may result in improvement Q Indoor FM antenna included Outdoor AM antenna Outdoor FM antenna U S A model AM loop antenna included 75 Q UNBAL 75 ohm 300 ohm antenna adapter 75 ohm coaxial cable 75 ohm 300 ohm C antenna adapter 300 ohm feeder amp Uff Z Ground GE zz ee ee ee Connecting the AM loop antenna Orient so that the best reception is obtained The AM loop antenna should be placed away from this unit The antenna may be hung on a wall The AM loop antenna always should be connected even if an outdoor AM antenna is connected to this unit GND TERMINAL Notes For maximum safety and minimum interference connect the When connecting the indoor FM GND terminal to a good earth ground A good earth ground is a antenna firmly insert its connector metal stake driven into moist earth into the FM ANT terminal Sw If you need an outdoor FM antenna to improve FM reception quality either Da 300 ohm feeder or coaxial cable may be used In locations troubled by electrical interference coaxial cable is preferable 22 ADJUSTMENTS BEFORE USING THIS UNIT SELECTING THE OUTPUT MODES This unit provides you the following five functions to determine the method of distributing output sign
38. mbled or encoded signals to prevent it from being dubbed there may be a case that the picture itself will be affected by those signals 3 Begin recording on the tape deck MD recorder or VCR connected to this unit 31 TUNING OPERATIONS Set INPUT on the front panel to the TUNER position When using the remote control transmitter press AMP lt TUNER gt on the component selector and then press TUNER on the input selector Normally if station signals are strong and there is no interference quick automatic search tuning AUTOMATIC TUNING is possible However if the signal from the station you want to select is weak you must tune in to it manually MANUAL TUNING YAMAHA natura souno av receiver AUTOMATIC TUNING MANUAL TUNING 1 Select the reception band FM or AM and confirm it on 1 Select the reception band FM or AM and confirm it on the display the display Front panel Front panel N Sie NZ N NZ NPA or or u Al ZIN ze PAN ZIN 2 Press TUNING MODE so that the AUTO TUNING 2 Press TUNING MODE indicator lights up on the display Front panel Front panel MODE TUNING on Confirm that the AUTO ial Me Z an i gt TUNING indicator
39. n speaker connections the SUBWOOFER OUTPUT terminal of this unit to the input terminal of the subwoofer system If you have a separate amplifier and subwoofer connect the SUBWOOFER OUTPUT terminal of this unit to the input terminal of the subwoofer amplifier and then connect the speaker terminals of the subwoofer amplifier to the subwoofer When the input signals to this unit are for normal 2 channel stereo this terminal outputs only frequencies below 90 Hz from the main and center channels When discrete signals are input C z to this unit and are selected as the input source this terminal enter speaker connection vue outputs signals from the subwoofer channel A center speaker can be connected to this unit Place it on or Note The output level of signals from this terminal is adjusted under the TV by VOLUME on the front panel or VOLUME Av on the remote control transmitter One or two speaker systems can be connected to this unit If you use only one speaker system connect it to either of the SPEAKERSA or B terminals Rear speaker connections A rear speaker system can be connected to this unit Place them to the rear of your listening position 19 How to connect Connect the SPEAKERS terminals to your speakers with wire of the proper gauge cut as short as possible If the connections are faulty no sound will be heard from the speakers Make sure that the polarity of the speaker wires is correct that is the and markings ar
40. ning mode TAPE MD MON indicator This lights up when the tape deck or MD recorder etc is selected as the program source by pressing TAPE MD MON EXT DECODER on the front panel or TAPE MD on the remote control transmitter STEREO indicator This lights up when an FM stereo broadcast with sufficient signal strength is being received 70mm DIGITAL 1 l ENHANCED l QO Signal level meter This indicates the signal level of the station being received If multipath interference is detected the indication decreases mmm SP and mP indicators DO DIGITAL lights up when the built in Dolby Digital decoder is on and the signal of the selected source encoded in Dolby Digital sound is not in 2 channel SP lights up when the built in digital sound field processor is on and DU PRO LOGIC lights up when the built in Dolby Pro Logic Surround decoder is on Depending on the selected DSP program both QODIGITAL and DSP or both DSP and Od PRO LOGIC will light up O SLEEP indicator This lights up while the built in SLEEP timer is functioning 11 REMOTE CONTROL TRANSMITTER See REMOTE CONTROL TRANSMITTER on page 46 for full details 0 Component selector Press the button for the component you want to control with the remote control transmitter The proper code must be set for your component See SETUP CODES on page 53 When the component sele
41. nput selector to Numeric buttons 1 These buttons are used to select the program source to be played They only function when AMP lt TUNER gt TAPE MD CD or DVD LD on the component selector has been pressed 2 These buttons are used to select the menu or channel They only function when DVD MENU VCR CBL DBS or TV on the component selector has been pressed 12 EFFECT CLEAR 100 1 This button is used to switch the DSP program on or off It only functions when AMP lt TUNER gt TAPE MD CD DVD LD VCR or TV on the component selector has been pressed 2 This button is used to clear the settings Itonly functions when DVD MENU on the component selector has been pressed 3 This button is used to select the channel It only functions when CBL DBS on the component selector has been pressed ENTER 102 1 This button is used to enter the channel It only functions when VCR CBL DBS or TV on the component selector has been pressed 2 This button is used to select the menu It only functions when DVD MENU on the component selector has been pressed DISC SKIP cH 1 1 These buttons are used to skip to the next or previous disc They only function when CD DVD LD or DVD MENU on the component selector has been pressed 2 These buttons are used to select the next or previous channel They only function when VCR CBL DBS or TV on the component selector has been pressed D Operation buttons
42. or more than three seconds the automatic preset tuning begins 5 EDIT This button is used to exchange the assignment of two preset stations with each other VIDEO AUX QO TUNING MODE AUTO MAN L MONO Press this button to switch the tuning mode to automatic or manual To select the automatic tuning mode press this button so that the AUTO TUNING indicator lights up on the display To select the manual tuning mode press this button so that the AUTO TUNING indicator goes off Q FM AM Press this button to switch the reception band to FM or AM O TUNING UP DOWN This button is used for tuning Press the UP side to tune in to higher frequencies and press the DOWN side to tune in to lower frequencies TAPE MD MON EXT DECODER Press this button to play a tape or an MD The TAPE MD MON indicator lights up on the display When you press the button next the TAPE MD MON indicator goes off EXT DECDR appears on the display and you can play the signal connected to the EXTERNAL DECODER INPUT terminals D INPUT Turn this selector to select the program source VCR VIDEO AUX TV DBS DVD LD CD TUNER PHONO to listen to or watch The name of the selected program source appears on the display INPUT MODE This button switches the DVD LD and TV DBS input signal mode AUTO ANALOG 12 VOLUME This control is used to raise or lower the
43. r and the rear speakers so that they become almost the same as that of the main speakers Press TIME LEVEL once or more to select the speaker to be adjusted so that CENTER R SUR L SUR or SWFR appears on the display Remote control TITLE Sa You cannot adjust the delay time while the test tone is sounding even if DELAY appears on the display after pressing TIME LEVEL once or more Adjust the level Pressing raises and lowers the level While adjusting the test tone is fixed on the selected speaker Remote control 9 Press TEST again to stop the test tone Remote control Notes e Once you have completed these adjustments you can only adjust the overall sound level of your audio system by using VOLUME or VOLUME A v on the remote control transmitter e If you use external power amplifiers you may also use their volume controls to achieve the proper balance e If the function CNTR in the SET MENU mode is set to the NONE position the sound output level of the center speaker cannot be adjusted in step 8 The center sound is automatically output from the left and right main speakers If there is insufficient sound output from the center and rear speakers you may decrease the main speaker output level by setting M LVL to 10 dB 27 BASIC OPERATIONS TO PLAY A SOURCE
44. then play is restored the sound output is interrupted for a moment because the digital input signal is selected again TO RECORD A SOURCE ON TAPE OR MD YAMAHA varuna souno av receiver 4 When a tape deck or MD recorder is being used for 1 Select the source to be recorded recording you can monitor the sounds being recorded Front panel Remote control by pressing TAPE MD MON EXT DECODER on the INPUT front panel or TAPE MD on the remote control re Su ee transmitter so that the TAPE MD MON indicator lights up on the display DVD LD TV DBS VCR or a Front panel Remote control L V AUX EXT DEC TAPE MD or TAPE MD MON EXT DECODER 2 Play the source and then turn up the volume to confirm the program source See page 32 for detailed Notes Monaten OMAA The settings of DSP and VOLUME BASS TREBLE and BALANCE have no effect on the material being recorded A source that is connected to this unit only through the digital Z terminals cannot be recorded by a tape deck MD recorder or VCR connected to this unit Please check the copyright laws in your country to record from records compact discs radio etc Recording of copyright material may infringe copyright laws Front panel Remote control If you use a video source that has scra
45. ut terminals This mode is automatically selected when you turn on the power to this unit In this mode the input signal is automatically selected in the following order of priority 1 Digital input signal from the COAXIAL terminal 2 Digital input signal from the OPTICAL terminal 3 Analog input signal For a source connected to the TV DBS input terminals This mode is selected when you turn on the power to this unit if the AUTO position is selected for INPUT in the SET MENU mode See page 45 for details In this mode the input signal is automatically selected in the following order of priority 1 Digital input signal from the OPTICAL terminal 2 Analog input signal ANALOG In this mode only an analog input signal is selected even if a digital signal is input at the same time Select this mode when you want to use the analog input signal instead of the digital input signal Notes on input mode selection To play back a source that is Dolby Digital decoded set the input mode to AUTO For the TV DBS source only the input mode selected for INPUT in the SET MENU mode is effective when you turn on the power to this unit When you want to enjoy a source which has normal 2 channel signals with a Dolby Pro Logic Surround program select the ANALOG mode In the AUTO mode there may be a case depending on the LD player or DVD player that when you search for a source encoded with Dolby Digital during play and
46. volume level PHONES jack When you use headphones connect the headphones to the PHONES jack You can listen to the sound to be output from the main speakers through the headphones When using headphones only set both SPEAKERS A and B to the OFF position and switch off the digital sound field processor so that no DSP program name appears on the display by pressing EFFECT D SPEAKERS Set A or B or both A and B to the ON position for the main speaker system connected to this unit that you want to use Set the button s for the main speaker system you don t want to use to the OFF position A B C D E Press this button to select one of a group A to E of preset stations Preset station number selector Each of these buttons selects a preset station number 1 to 8 D Tone controls These controls are only effective for the sound from the main speakers BASS Use this control to increase or decrease the low frequency response The 0 position produces flat response TREBLE Use this control to increase or decrease the high frequency response The 0 position produces flat response 10 D BALANCE This control is only effective for the sound from the main speakers Turn the control to adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions D TIME LEVEL Press this button to select the item in
47. y compensating for the lack of presence and dynamics in your listening room with its original digital sound fields combined with the Dolby Surround sound system CINEMA DSP The YAMAHA CINEMA DSP logo indicates those programs that are created by the combination of Dolby Surround and YAMAHA DSP technology Dolby Pro Logic 2 Digital Sound Fields Digital sound fields are created on the presence side and the rear surround side of the Dolby Pro Logic Surround decoded sound field respectively They create a wide acoustic environment and emphasize the surround effect in the room letting you feel as much presence as if you are watching a movie in a popular Dolby Stereo theater This combination is available when the DOLBY PRO LOGIC ENHANCED DOLBY DIGITAL ENHANCED 70 mm MOVIE THEATER DIGITAL MOVIE THEATER or TV SPORTS sound field program is selected and the input signal of source is analog PCM audio or encoded with Dolby Digital sound in 2 channel Dolby Digital 3 Digital Sound Fields Digital sound fields are created on the presence side and the independent left and right surround sides of the Dolby Digital decoded sound field respectively They create a wide acoustic environment and strong surround effect in the room without losing high channel separation With the wide dynamic range of Dolby Digital sound this sound field combination lets you feel as if you ar
Download Pdf Manuals
Related Search