TRENDnet TPL406E2K Network Hardware User Manual
Contents
1. LED Power PWR Powerline PL with Connection Quality Indication Best Green Better Amber Good Red No connection Off Ethernet Connection e Solid Copyright 2012 TRENDnet All Rights Reserved e Blinking e Off Buttons Sync 3 sec Reset 20 sec Dimension L x W X H A 70 x 50 x 43 mm 2 76 x 1 97 x 1 69 in per unit EU 70 x 50 x 63 mm 2 76 x 1 97 x 2 48 in per unit UK 70 x 50 x 58 mm 2 76 x 1 97 x 2 28 in per unit A 51 g 1 8 oz per unit EU 56 7 g 2 0 oz per unit UK 68 g 2 4 oz per unit Consumption Active mode 2 2 Watts max Standby mode 0 5 Watts max Temperature Operating 0 40 C 32 104 F Storage 10 55 C 14 131 F Max 95 non condensing Certifications CE FCC Maximum of 8 adapters nodes recommended for streaming video across your network 500Mbps is the maximum theoretical Powerline data rate Actual throughput will vary depending on environment Networked Powerline devices need to be plugged into power outlets that are on the same electrical system GFCI outlets and AFCI circuit breakers may degrade Powerline network signals 21 TRENDnet User s Guide Troubleshooting Please reference the items below if you continue to experience difficulty with installing and using your Powerline adapters Do not use the Sync button for more than 2 Powerline adapters to connect simultaneously Wait for each Powerline adapter to connect t2. Niniejszym TRENDnet o wiadcza e TPL 406E jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 2004 108 EC TRENDnet declara que este TPL 406E est conforme com os requisitos essenciais e outras disposi es da Directiva 2004 108 CE TRENDnet izjavlja da je ta TPL 406E v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 2004 108 ES TRENDnet t mto vyhlasuje e TPL 406E spi a z kladn po iadavky a v etky pr slu n ustanovenia Smernice 2004 108 ES TRENDnet vakuuttaa t ten ett TPL 406E tyyppinen laite on direktiivin 2004 108 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen H rmed intygar TRENDnet att denna TPL 406E st r verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 2004 108 EG 26 TRENDnet User s Guide Limited Warranty Limited Warranty TRENDnet warrants its products against defects in material and workmanship under normal use and service for the following lengths of time from the date of purchase TPL 406E TPL 406E2K 3 Years Warranty AC DC Power Adapter Cooling Fan and Power Supply carry 1 year warranty If a product does not operate as warranted during the applicable warranty period TRENDnet shall reserve the right at its expense to repair or replace the defective product or part and deliver an equivalent product or part to
3. The secondary or additional Powerline Reset seconds adapter s Sync button must also be pushed within 2 see Using then release minutes 120 sec of pushing the Sync button on the the Sync first adapter in order to establish connectivity Button oa for Reset Reset device to factory defaults All LEDs will turn off instructions Push Hold for 20 and turn back on seconds Note Will reset to the factory default private then release network name HomePlug AV e Power Prong Plugs into an available power outlet e Diagnostic LEDs Indicates the device status and connectivity Note Powerline PL LED color indicates the strength and quality of the Powerline connection through the electrical system Copyright 2012 TRENDnet All Rights Reserved Power N A lO ooo Device powered off Powerline connected as quality is sa DM e Green Syncing or Powerline data Blinking transmitting receiving Connection quality is Best PL a connected Connection quality is Powerline Aner DH Powerline data transmitting receiving Blinking SEN Connection quality is Better Powerline connected Connection quality is Solid Good Powerline data transmitting receiving Blinking Connection quality is Good N A off Powerline is not synced or connected Powerline is not synced or connected Sa 10 20 Mbps 100 200Mbps oli Half Full Duplex connected Green ETH o 10 20 Mbps 100 200Mbps Blinking o Half Fu
4. is installed and also near the router e Make sure there is an available wall power outlet in the room where you want to extend network connectivity Copyright 2012 TRENDnet All Rights Reserved Connect a Powerline adapter to your router 1 Plug the Powerline adapter into an available wall power outlet near your router Note This will allow devices connected to your Powerline network to access the Internet and other devices connected to your network 2 Connect the included Ethernet cable also called network cable from the Ethernet port also called network port of your Powerline adapter to an available Ethernet port also called LAN port on your router 3 Once the Powerline adapter is installed and connected to your router verify that the Power PWR LED is on or blinking and the Ethernet Connection ETH LED is on or blinking TRENDnet User s Guide TPL 406E TPL 406E2K Add adapters to your network Once you have installed and connected the first Powerline adapter to your router you can easily extend your network to other rooms by adding additional Powerline adapters To extend your network using an additional Powerline adapter 1 First make sure the first Powerline adapter is installed and connected to your router Note This will allow devices connected to your Powerline network to access the Internet and other devices connected to your network See Connect a Powerline adapter to your router o
5. 1 2 10 In the Install Options window leave the option Automatically start the WinPcap driver at boot time checked and click Install Installation options Please review the following options before installing WinPcap 4 12 e 1 WinPcap 4 1 2 Setup Welcome to the WinPcap 4 1 2 Setup Wizard This Wizard will guide you through the entire WinPcap installation For more information or support please visit the WinPcap home page http www winpcap org EE Te zb ell E Le mae Nullsoft Install System v2 46 Copyright 2012 TRENDnet All Rights Reserved 11 TRENDnet User s Guide TPL 406E TPL 406E2K 1 WinPcap 4 1 2 Setup 11 Wait for the WinPcap installation to complete Using the Utility II Dh Installing W inPeap Please wait while WinPcap 4 1 2 is being installed Before using the utility please ensure the following J Extract drivers npfisys 100 RC VEU 8 8 8 Completing the WinPcap 4 12 Setup Wizard WinPcap 4 1 2 has been installed on your computer Click Finish to dose this wizard Write down the Device Password DPW 16 digit characters A Z only and MAC Address 12 digit characters a f A F 0 9 of each Powerline adapter as this will be required to change the encryption key for multiple Powerline adapters See Product Hardware Features on page 2 Make sure your computer in which you are installing the utility is connected to your network and you
6. 4 Click Enter Password Enter Password 17 TRENDnet User s Guide TPL 406E TPL 406E2K 5 Enter the Device Password DPW and click OK Note Match the Device Password DPW to the corresponding MAC address Device Device A 00 90 47 15 54 58 Password WE RRE ER The Password typically appears as a number and letter code in groups of four separated by dashes fie EST GHEE BRTE LES Itiz found on the device or packaging Cancel 6 If successful you will receive a message indicating that the password is correct Click OK Repeat steps 2 6 for each additional Powerline adapter listed in Remote Device until you have added all of your remaining Powerline adapters before continuing to the next step To create a customized encryption key Copyright 2012 TRENDnet All Rights Reserved To create a customized encryption key 1 In the Powerline Utility Privacy window under Private Network Name enter the new encryption key for your Powerline network Main Privacy Diagnostics About Use this screen to create Private Network that provides you with extra security OF Use Default Public Network Do not share the network name with others you do not want to be part of this network Private Network Name 2 After you have entered your new Powerline encryption key click Set All Devices After setting the name above choose how it wll be applied below Place On This
7. Power PWR LED will start blinking This will initiate the Sync process and generate a random encryption key on the first Powerline adapter 3 Within 2 minutes push and hold the Sync button on the other Powerline adapter for 3 seconds and release it The Power PWR LED will start blinking This will negotiate a connection between both Powerline adapters using the new encryption key All LEDs will turn off and turn back on and the Powerline PL LED will turn on the when adapters are connected Copyright 2012 TRENDnet All Rights Reserved Add adapters using the Sync button If you have changed the default encryption key assigned to your Powerline adapters additional adapters will not automatically connect to your Powerline network after they are plugged into a wall power outlet For any additional adapters you will need to reconfigure any additional Powerline adapters that you add to use the encryption key of your existing Powerline network 1st Adapter 2nd Adapter Modem Router Ethernet Additional Adapter Electrical Wiring Powerline Network TRENDnet User s Guide TPL 406E TPL 406E2K To reconfigure an additional Powerline adapter to connect and use the encryption key of your existing Powerline network Using the Powerline Utility Note Use the Sync button procedure below if you are connecting TRENDnet Powerline The Powerline Utility allows you to do the following models TPL 303E TPL 304E
8. can generate significant Powerline interference If your building has more than one circuit breaker box the Powerline adapter may not be able to establish connectivity between them In this case connect a Powerline adapter into a power outlet located on each of the circuit breaker boxes Then connect an Ethernet cable between the Powerline adapters to bridge the two circuits together Copyright 2012 TRENDnet All Rights Reserved TPL 406E TPL 406E2K In addition to this User s Guide you can find help below e http www trendnet com support documentation downloads FAQs how to contact technical support e Autorun CD Quick Installation Guide 22 TRENDnet User s Guide TPL 406E TPL 406E2K Appendix Using the Sync Button with other TRENDnet Powerline models A different Sync button procedure may be required depending on the TRENDnet Powerline model adapter s you are using If you are using one of the Powerline models listed in the table below you will need to use the Sync button procedure provided on the next page to connect to TRENDnet models TPL 303E TPL 304E TPL 308E TPL 309E TPL 311P TPL 406E or TPL 407E TPL 405E TPL 401E TPL 402E TPL 305E TPL 310AP TPL 306E TPL 307E If you are using an older firmware version on your Powerline adapter it is recommended for you upgrade to the latest firmware version to ensure the latest fixes To check if firmware updates are available for your P
9. key HomePlugAV In order for your Powerline devices to connect to the same Powerline network the same encryption key must be assigned to all Powerline devices in that network Powerline devices that are not assigned the same encryption key will not be able to connect to the Powerline network For additional security TRENDnet recommends changing adapter default encryption key to prevent a neighbor with a Powerline adapter and the same default encryption key from gaining access to your network Note After the default encryption key has been changed and the Powerline adapters have been connected using a new encryption key the Powerline adapters will retain their security settings when they are unplugged and moved to a new location No additional reconfiguration of the Powerline adapters is needed after the default encryption has been changed There are two methods to change the default encryption key e Use the physical Sync button on your Powerline adapter to generate a random encryption key See Using the Sync Button on page 7 Racommended method OR e Create a customized encryption key for your Powerline network using the included Powerline Utility See Using the Powerline Utility on page 9 IF users first use the Sync button method the adapters will need to be reset to factory defaults in order to change setting using the Powerline Utility Copyright 2012 TRENDnet All Rights Reserved Using t
10. of 8 adapters nodes recommended for streaming video across your network 500Mbps is the maximum theoretical Powerline data rate Actual throughput will vary depending on environment Networked Powerline devices need to be plugged into power outlets that are on the same electrical system goes lt Power PWR LED ee _ Powerline PL LED A 4 Ethernet Connection ETH LED GEC outlets and AFCI circuit breakers may degrade Powerline network signals Product Hardware Features Device Label Sync Reset Button Product Model Device Serial Number via No FC LL LL LL LL e Device MAC Address gt Ta MAG KKK Device Password DPW DPW MN MKEX MM NNN k Ki Ethernet Port Hardware amp Firmware Version HW FW i AC 100 240V 200mA 50 60Hz This device complies with Part 15 of FCC rules Made in China S lt Power Prong TTT ug d A A Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TPL 406E TPL 406E2K e Ethernet Port Connect an Ethernet cable also called network cable from your Powerline adapter Ethernet port and to your computer or network device e Sync Button Changes the default encryption key e Reset Button Resets the unit to factory defaults Initiate Sync Connection and generate random Sync network name key PWR LED will start blinking Sync Push hold for 3 Note
11. the customer The repair replacement unit s warranty continues from the original date of purchase All products that are replaced become the property of TRENDnet Replacement products may be new or reconditioned TRENDnet does not issue refunds or credit Please contact the point of purchase for their return policies TRENDnet shall not be responsible for any software firmware information or memory data of customer contained in stored on or integrated with any products returned to TRENDnet pursuant to any warranty There are no user serviceable parts inside the product Do not remove or attempt to service the product by any unauthorized service center This warranty is voided if i the product has been modified or repaired by any unauthorized service center ii the product was subject to accident abuse or improper use iii the product was subject to conditions more severe than those specified in the manual Warranty service may be obtained by contacting TRENDnet within the applicable warranty period and providing a copy of the dated proof of the purchase Upon proper submission of required documentation a Return Material Authorization RMA number will be issued An RMA number is required in order to initiate warranty service support for all TRENDnet products Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid insured and packaged appropriatel
12. the encryption key of be required to change the encryption key for multiple Powerline adapters See your existing Powerline network All LEDs will turn off and turn back on and the Product Hardware Features on page 2 Powerline PL LED will turn on the adapters are connected e Make sure your computer in which you are installing the utility is connected to your network and your Powerline adapters are also connected to your network To reconfigure the encryption key and connect additional Powerline adapters to your e Ifyou have changed your encryption key using the Sync button and you are existing Powerline network repeat the steps above for each adapter creating a customized encryption key it is required to reset all Powerline devices to factory defaults using the physical Reset button on your Powerline adapter first before using the utility See Product Hardware Features on page 2 e Please ensure that your Powerline adapters are already installed and connected and the Ethernet port on each adapter is connected to a device powered on Powerline Utility System Requirements e Windows 7 32 64 bit Windows Vista 32 64 bit or Windows XP 32 64 bit e Microsoft NET Framework 2 0 installed Included with CD installation Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TPL 406E TPL 406E2K Software Installation 5 At the Install Location installation window click Install EE install Locati
13. will negotiate a connection between both Powerline adapters using the new encryption key All LEDs will turn off and turn back on and the Powerline PL LED will turn on the when adapters are connected 23 TRENDnet User s Guide TPL 406E TPL 406E2K To reconfigure an additional Powerline adapter to connect and use the encryption key of your existing Powerline network Note Assuming two Powerline adapters are models listed in the table with are already connected and the additional Powerline adapter being the TPL 303E TPL 304E TPL 308E TPL 309E TPL 311P TPL 406E or TPL 407E In this example the procedure below will reference how to connect the TPL 406E as an additional Powerline adapter to an existing Powerline network already connected with two TPL 306E Powerline adapters by using the Sync button Either of the TPL 306E can be replaced with any of the models in the table and the TPL 406E can be replaced with the TPL 303E TPL 304E TPL 311P or TPL 407E when following this procedure First you will need to connect one of the TPL 306E Powerline adapters to the additional TPL 406E Powerline adapter using the procedure on the previous page To change the default encryption key between two Powerline adapters This will first disconnect the TPL 306E adapters from each other and connect one of the TPL 306E adapter to the TPL 406E Then follow the procedure below to reconnect the other disconnected TPL 306E Powerline adapter t
14. window Set All Devices Note If you change the encryption key for the Powerline adapter Local Device this will disconnect the Local Device Powerline adapter from the Powerline network Set All Devices Changes the encryption key for all or multiple Powerline adapters connected to your Powerline network Note Please make sure you have added and entered the DPW for all Powerline adapters in your Powerline network before applying this setting If you do not the encryption key will not change for any Powerline adapters without the DPW entered Copyright 2012 TRENDnet All Rights Reserved Close Closes and exits the Powerline Utility application 14 TRENDnet User s Guide TPL 406E TPL 406E2K System Information Displays the device and other related information such as firmware version MAC address and encryption key also called network password You can vertically scroll the window to view all of the system information Remote Device History Log Displays Powerline adapters or other Powerline devices Remote Device that have been previously connected to or discovered on your Powerline Network Main Privacy Diagnostics About Powerline Utility Overview Diagnostics Window System Information a On NIC 1 MAC HomePlug Device 1 MAC Network password HomePlugal Vendor Firmware Computer network name XXNX Remote Device History Log MAC Addre
15. www trendnet com register TRENDnet 20675 Manhattan Place Torrance CA 90501 USA Copyright 2012 All Rights Reserved TRENDnet
16. 0 3 3 2008 e EN 55024 2010 e EN 50412 2 1 2005 e EN 60950 1 2006 A11 2009 25 TRENDnet User s Guide TPL 406E TPL 406E2K es esky Czech dal Dansk Danish Deutsch German et Eesti Estonian en English es Espafiol Spanish eV EAANviKy Greek Ltr Francais French Lit Italiano Italian Latviski Latvian TRENDnet timto prohlasuje ze tento TPL 406E je ve shod se z kladn mi po adavky a dal mi p slu n mi ustanoven mi sm rnice 2004 108 ES Undertegnede TRENDnet erkl rer herved at f lgende udstyr TPL 406E overholder de v sentlige krav og vrige relevante krav i direktiv 2004 108 EF Hiermit erkl rt TRENDnet dass sich das Ger t TPL 406E in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschl gigen Bestimmungen der Richtlinie 2004 108 EG befindet K esolevaga kinnitab TRENDnet seadme TPL 406E vastavust direktiivi 2004 108 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele Hereby TRENDnet declares that this TPL 406E is in compliance with the essential requirements and other relevant provisions of Directive 2004 108 EC Por medio de la presente TRENDnet declara que el TPL 406E cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2004 108 CE ME THN MAPOY2A TRENDnet AHAQNEI OTI TPL 406E LYMMOPOONETAI MPOZ TIX
17. E TPL 406E2K Installing your Powerline Adapters Before you Install 1 Before you proceed with the installation verify the following e You already have a router already installed e You already have Internet access through your existing network e An Ethernet port also called LAN port is available on your router e Verify that you have at least two Powerline adapters You will need at least two Powerline adapters to create a Powerline network Note The TPL 406E package only includes a single Powerline adapter Please ensure that your other Powerline adapter is HomePlug AV or IEEE 1901 compliant e g TRENDnet models TPL 303E TPL 304E TPL 305E TPL 306E TPL 307E TPL 308E TPL 309E TPL 310AP TPL 311P TPL 401E TPL 402E TPL 405E TPL 407E or another TPL 406E 2 Plan the location of where you will install your Powerline adapters e Avoid plugging the adapters into power strips extension cords or surge protectors as this may prevent the adapter from functioning correctly or degrade performance e Avoid plugging the adapters into wall power outlets that are controlled by a light switch to prevent the Powerline adapter from being turned off accidentally e Avoid plugging the adapters into wall power outlets that are located near appliances that consume a lot of power e g refrigerators washers dryers as this may degrade performance e Make sure there is an available wall power outlet in the room where the router
18. H geg ee connected to your Ee HomePlug 44 6405 D 00 90 47 15 54 89 automatically and does router Upgrade Fimware not appear in the list Note If your computer click Connect to detect is connected directly to 2 Powerline Devices detected Network Type Public TEE your Powerline adapter to the Powerline the Local Device listed HI 125 00 UU 90 47 75 64 38 adapter Local Device will be the Powerline mumm 152 00 00 90 47 1F 14 85 again adapter your computer is directly connected to j j Upgrade Firmware Device Name Device Password Connection Speed or MAC Allows you to upgrade DPW Quality Link Rate Address the Powerline adapter z z Local Device firmware emote Devices a ine ad TRENDNET See page SMe HEES aprers Ai Rename Enter Password Add Scar remote locations that are connected to the selected Scan Device across the electrical a ae al adapters that are system Rename Enter Password Add connected to your Note If all of your Powerline Renames the Allows you to Allows you to Powerline network adapters are already listed Powerline enter the DPW forthe adda Powerline Remote Device connected to your Powerline adapter listed Powerline adapter to your network they will Remote Device adapter Remote Powerline Close automatically detected and Device THIS network that is appear in the list If not you MUST BE ENTERED not listed Closes and exits will need to add them FOR ALL DEVICES TO Remote Devi
19. Leer Guide TRENDNET o00Mbps Compact Powerline AV Adapter 00Mbps Compact Powerline AV Adapter Kit TPL 406E TPL 4A06E2K TRENDnet User s Guide Table of Contents Contents M tte de TE 1 Package CONS a REEDE ARE Aiai 1 BSS e E O A AE E E R 1 Product Hardware te anne heateatnhenoeneisndeednienneehretenan ie nteece tele 2 Application Diagram sscsecssucscwecsssdscenvabecneaneessanedzcosvansnnsidusiedsdeasiiedadeuseuecwssaeeaddantaderseateedens 4 Installing your Powerline AdapterS ssssssssssssossssossesosessosessesoseo 5 Be FOS VOU IGE all E a E OEE 5 Connect a Powerline adapter to your router 5 Add adapters to your network 6 Securing your Powerline Network ccscscsssscscscscsccscececcecscsceccess 7 Using the Sync button 7 Change your default encryption key using the Sync button 7 Add adapters using the Sync button ss 8 Using the Powerline UGIN Sugeruseeegee teg eege ge Edge ENNER Ree 9 Powerline Utility System Requirements ss 9 Sien DEE le EE 10 Uone CA 8 ILES ER eee 12 Powerline Utility RE 13 Add adapters in the utility and create a customized encryption key 17 Upgrade Firmware cccccssecccsscccesceceneccenececncecenceceeeseeeceeeeceseuceseneetseeeeueceseneenenes 19 Technical Specifications ssssesessesessecessecescecessscecescessssesesoesseseo 21 le Ee e d EEN 22 PROC oriee E E E cudsanseeccncncsar 23 Copyright 2012 TRENDnet All Rights Rese
20. Network Only the device attached to this computer the Local Device Set Local Device Onl Isolates this computer from others ef Local Device Unis OR ALL devices whose Password has been entered They communicate together but are isolated from devices with Cet All Devices a different network name 3 Click OK If successful you will receive a message indicating that all Powerline adapters were added to your network verifying that the encryption key was changed for all Powerline adapters Click OK s Setting the network name on the devices whose password has been D entered This may take few seconds Click on Ok button Cancel 18 TRENDnet User s Guide TPL 406E TPL 406E2K To rename the Powerline adapters Upgrade Firmware Note Renaming the Powerline adapters Remote devices to describe the location of the Note The firmware can only be upgraded when your computer is directly connected to device will help you to easily identify which Powerline adapter you are monitoring in the the Powerline adapter Ethernet port also called network port using an Ethernet cable utility also called network cable The Device Password DPW is not required when upgrading the firmware 1 In the Powerline Utility Main window select one of the Powerline adapters listed under Remote Device 1 To check if firmware updates are available for your Powerline adapter check your Powerline model http www trendnet com
21. OYZIOAEIZ AIIAITHZELZ KAI TI gt AOINE2 2XETIKEX AIATA EIZ TH OAHITIAS 2004 108 EK Par la pr sente TRENDnet d clare que l appareil TPL 406E est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2004 108 CE Con la presente TRENDnet dichiara che questo TPL 406E conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2004 108 CE Ar o TRENDnet deklar ka TPL 406E atbilst Direkt vas 2004 108 EK b tiskaj m pras b m un citiem ar to saist tajiem Copyright 2012 TRENDnet All Rights Reserved Lietuviy Lithuanian nl Nederlands Dutch mt Malti Maltese bul Magyar Hungarian el Polski Polish pt Portugu s Portuguese Slovensko Slovenian Slovensky Slovak filsuomi Finnish Svenska Swedish noteikumiem iuo TRENDnet deklaruoja kad is TPL 406E atitinka esminius reikalavimus ir kitas 2004 108 EB Direktyvos nuostatas Hierbij verklaart TRENDnet dat het toestel TPL 406E in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 2004 108 EG Hawnhekk TRENDnet jiddikjara li dan TPL 406E jikkonforma mal htigijiet essenzjali u ma provvedimenti o rajn relevanti li hemm fid Dirrettiva 2004 108 EC Alul rott TRENDnet nyilatkozom hogy a TPL 406E megfelel a vonatkoz alapvet k vetelm nyeknek s az 2004 108 EC ir nyelv egy b eldirasainak
22. TPL 308E TPL 309E TPL 311P TPL 406E or TPL 407E If e Create a customized encryption key for your Powerline network and apply it to you are connecting to other TRENDnet Powerline models please refer to the Appendix multiple Powerline adapters at the same time on page 23 for using the correct Sync button procedure e View the Powerline adapters connected to your network using the MAC address and the approximate connection quality and speed of each Powerline 1 Verify that all existing Powerline adapters are already installed and connected adapter e View and upgrade Powerline adapter firmware 2 Push and hold the Sync button on one of the existing Powerline adapters connected Note Link speed displayed in the utility of your Powerline adapters to another to your Powerline network for 3 seconds and release it The Power PWR LED will start through your electrical system is estimated Actual link speed may vary blinking This will initiate the Sync process on the existing Powerline adapter Before installing and using the utility please ensure the following 3 Within 2 minutes push and hold the Sync button on the additional Powerline adapter e Write down the Device Password DPW 16 digit characters A Z only and MAC for 3 seconds and release it The Power PWR LED will start blinking This will Address 12 digit characters a f A F 0 9 of each Powerline adapter as this will reconfigure your additional Powerline adapter to connect and use
23. UDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT TRENDNET S OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE Governing Law This Limited Warranty shall be governed by the laws of the state of California Some TRENDnet products include software code written by third party developers These codes are subject to the GNU General Public License GPL or GNU Lesser General Public License LGPL Go to http www trendnet com gpl or http www trendnet com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers TRENDnet does not provide technical support for these codes Please go www gnu org licenses gpl txt or http www gnu org licenses Igpl txt for specific terms of each license 2 TRENDnet Product VVarranty Registration Please take a moment to register your product online Go to TRENDnet website at http
24. ce Tie Ow ernie manually CHANGE THE EE ENCRYPTION SEEESEER CODE Copyright 2012 TRENDnet All Rights Reserved 13 TRENDnet User s Guide TPL 406E TPL 406E2K Powerline Utility Overview Privacy Window Main Privacy Diagnostics About Use this screen to create a Private Network that provides you with extra security Use Default Public Network Do not share the network name with others you do not want to be part of this network Use Default Public Network Replaces the current encryption key value with the default HomePlugAV Note You will still need to apply the settings to your Powerline adapters by clicking Set Local Device Only or Set All Devices Encryption Key Private Network Hame Encryption key for your OR Powerline network Note The default encryption key is HomePlugAV If you have used the Sync button to change and generate a random encryption key Unknown Networkname After setting the name above choose how it will be applied below Place On This Network Only the device attached to this computer the Local Device Isolates this computer from others Set Local Device Only will be displayed OF Set Local Device Only ALL devices whose Password has been entered They communicate together but are isolated from devices with a different network name Changes the encryption key for the Powerline adapter listed as the Local Device on the adapter on the Main
25. downloads 2 Powerline Devices detected Network Type Public Autoscan Un Device Name Password 1 Quality Rate Mbps MAC Address 2 Save the zipped firmware file zip and extract the file to your computer Device 4 MN 13200 00 90 47 15 84 88 BD device III 152 00 00 30 471F 14 85 3 Make sure you connect your computer with the utility installed is directly connected to the Powerline adapter using an Ethernet cable also called network cable when 2 Click Rename upgrading the device firmware Rename 3 The device name field will be available to edit 5 To rename the adapter that is immediately connected to your computer move your computer to a different adapter and restart the process listed above Copyright 2012 TRENDnet All Rights Reserved 19 TRENDnet User s Guide TPL 406E TPL 406E2K 4 Launch the Powerline Utility by double clicking the icon TRENDnet Powerline Utility 5 The device should appear in the Main window of the utility under Local Device Click Upgrade Firmware Main Privacy Diagnostics About Local Device s on your computer Device Type 8 M i Address HomePlug AV 7400 D 00 90 47 1E CF 9D Connected to HomePlug AN r400 Device Connect 0 Powerline Devices detected Network Type Private Scanning Device Name Password Quality Rate Mbps MAC Address TRENDNET Rename Ente
26. ed on Jane s Room First add all of the Powerline adapters to the utility and enter the Device Password DPW for each Powerline adapter to ensure you can change the encryption key for multiple adapters This is required when using the Powerline utility to change the encryption key for multiple Powerline adapters To add automatically detected Powerline adapters to the Powerline Utility 1 Launch the Powerline Utility TRENDnet Powerline Utility Copyright 2012 TRENDnet All Rights Reserved 2 In the Powerline Utility Main window wait for the utility to automatically scan for Powerline adapters already connected to your Powerline network If your Powerline adapters have already been installed and connected using the same encryption key they should appear in the Remote Device list Main Privacy Diagnostics About Local Device s on your computer Device Type MAC Address Connected to HomePlug AV 6405 Device i HomePlug 44 6405 D 00 950 47 15 84 55 Upgrade Firmware 2 Powerline Devices detected Network Type Public Autoscan Oni amp Device 4 UU 126 00 UU 30 47 75 84 58 amp Device 7 UU 152 00 O0 OU 47 7F 14 85 lt TRENDNET Rename Enter Password Add Scan 3 Select one of the Powerline adapters listed under Remote Device 2 Powerline Devices detected Network Type Public Autoscan Un UI 132 00 DU OU 47 15 D4 D Lei Device 7 IHN 152 00 DIOU 47 7F 14 85
27. etworks can be created per electrical system Any additional Powerline networks above the recommended may result in significant degradation in Powerline performance Powerline Group 3 Encryption Key key Powerline Group 1 Encryption Key keyl 24 TRENDnet User s Guide TPL 406E TPL 406E2K Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modif
28. he Sync button Change your default encryption key using the Sync button The physical Sync button on the Powerline adapter provides an easy method of changing the default encryption key The Sync button generates a random encryption key for your Powerline network To create a customized encryption key see Using the Powerline Utility on page 9 Note The default encryption key assigned to TRENDnet Powerline adapters is HomePlugAV Before changing the default encryption please ensure that your Powerline adapters are already installed and connected using the default encryption key See Installing your Powerline Adapters on page 5 1st Adapter Modem Router DA 2nd Adapter EE GEES Electrical Wiring Powerline Network TRENDnet User s Guide TPL 406E TPL 406E2K To change the default encryption key between two Powerline adapters Note Use the Sync button procedure below if you are connecting TRENDnet Powerline models TPL 303E TPL 304E TPL 308E TPL 309E TPL 311P TPL 406E or TPL 407E If you are connecting to other TRENDnet Powerline models please refer to the Appendix on page 23 for using the correct Sync button procedure 1 Verify that all Powerline adapters are already installed and connected using the default encryption key see Installing your Powerline Adapters on page 5 2 Push and hold the Sync button on one of the Powerline adapters for 3 seconds and release it The
29. ications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Copyright 2012 TRENDnet All Rights Reserved The availability of some specific channels and or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination The firmware setting is not accessible by the end user RoHS This product is ROHS compliant Europe EU Declaration of Conformity This device complies with the essential requirements of the Directive 2004 108 EC The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Directive 2004 108 EC e EN 55022 2006 A1 2007 e EN 61000 3 2 2006 A2 2009 e EN 6100
30. indow click Next 9 In the License Agreement window click I Agree Note The Powerline Configuration Utility requires the use of the WinPcap application If you are prompted to install the WinPcap application continue through the following H SSES E steps to complete the installation Otherwise if you are not prompted to install WinPcap yJ mi cap Please review the license terms before installing WinPcap 4 1 2 reboot your computer to complete the installation Press Page Down to see the rest of the agreement Copyright c 1999 2005 NetGroup Politecnico di Torino Italy Copyright c 2005 2010 CACE Technologies Davis California All rights reserved P WinPcap 4 1 2 Se H b WinPcap 4 1 2 Installer SAN cap Welcome to the WinPcap 4 1 2 Installation Wizard Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials This product is brought to you by A TECHNOLOGIES Packet Capturing and Network Analysis Solutions If you accept the terms of the agreement dick I Agree to continue You must accept the agreement to install WinPcap 4
31. ll Duplex data transmitting receiving Port disconnected no Ethernet link Note The following factors may affect the Powerline network s connection quality e Noise Generated by appliances which use your electrical system e g Microwaves ovens blow dryer iron dishwasher etc The quality of your household electrical wiring may also cause additional noise on your electrical system e Distance Long lengths of electrical wiring through your electrical system between connected Powerline adapters TRENDnet User s Guide TPL 406E TPL 406E2K Power Saving The device will automatically reduce power usage when the connected Application Diagram device via Ethernet is powered off unplugged or inactive for more than 5 minutes The device will return to active mode when the connected device via Ethernet is Powerline Networking Solution powered on and the link is active 10 100Mbps J Powerline Diagram Explanation The first Powerline unit is networked to a router which is in turn connected to a modem typically from your Internet Service Provider ISP which provides Internet connectivity A second Powerline adapter is plugged into a wall power outlet near a media center and is connected to a network game console and another network enabled media device such as a network enabled media player to provide Internet connectivity Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TPL 406
32. n page 5 2 Plug the additional Powerline adapter into an available wall power outlet in another room near a computer or network device e g game consoles network enabled TVs network attached storage network media server players etc that you would like to connect to your network 3 Connect the included Ethernet cable from the Ethernet port on your Powerline adapter to the to the Ethernet port of your computers or network devices 4 After the additional Powerline adapter is connected and installed to your computer or network device wait for the Powerline PL LED to turn on After the Powerline PL LED turns on verify that the Power PWR LED is on the Powerline PL LED is on or blinking and the Ethernet Connection ETH LED is on or blinking Note To verify that your Powerline adapters are connected successfully to your network you can check if the computer s or network device s can access the Internet through your Powerline network To install additional Powerline adapters in other rooms repeat the steps above for each adapter Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TPL 406E TPL 406E2K Securing your Powerline Network Powerline networks consist of two or more Powerline devices connected together using the same encryption key TRENDnet Powerline adapters automatically connect to each other over a secure encrypted signal and share the same encryption key Default encryption
33. o your Powerline network one at a time before connecting the next adapter Using more than one adapter to Sync simultaneously may cause some of your adapters not to Sync and establish connection to your Powerline network Power cycle the Powerline adapters by disconnecting them from their power outlets for 15 seconds and then reconnect them If the Powerline PL LED is red try plugging the Powerline adapter into another available power outlet The quality of the connection may be better ina different power outlet If you are having issues connecting the Powerline adapters after changing the encryption key using the Sync button or Powerline utility reset the Powerline adapters to defaults using the physical Reset button Using a pin or paperclip press and hold the Reset button for 1 second on each Powerline adapter All LEDs will turn off then turn back on This will reset the Powerline adapters to their default settings The default encryption key is HomePlugAV The Powerline adapters can provide better connectivity and performance when plugged directly into a power outlet Connecting the Powerline adapters to a power strip or surge protector may degrade or block Powerline signals Avoid using the Powerline adapters on GFI protected outlets and electrical systems with AFCI circuit breakers They may degrade or block Powerline signals The Powerline adapters should not be used in areas with excessive heat Florescent and incandescent lighting
34. o your Powerline network 1 Push and hold the Sync button on the other TPL 306E for 15 seconds and release it All LEDs will turn off and turn back on This will erase the current encryption key assigned to the TPL 306E 2 Afterwards push and hold the Sync button on the same TPL 306E for 2 seconds and release it The Power PWR LED will start blinking This will initiate the Sync process 3 Within 2 minutes push and hold the Sync button on the TPL 406E for 3 seconds and release it The Power PWR LED will start blinking This will negotiate a connection between both Powerline adapters using the new encryption key All LEDs will turn off and turn back on and the Powerline PL LED will turn on the when adapters are connected Copyright 2012 TRENDnet All Rights Reserved Overlapping Powerline networks It is possible to create multiple Powerline networks on the same electrical system separated and grouped by different network encryption keys The Powerline networks will work and communicate independently of each other which can provide security between different groups of Powerline adapters For example if you have five powerline adapters Adapter A Adapter B Adapter C Adapter D Adapter E you can group Adapters A B and C together on one powerline network and group Adapters D and E on a different Powerline network Each group will use a different encryption key Note It is recommended that only a maximum of up to 4 Powerline n
35. on 1 Insert the included CD ROM int ter s CD ROM drive Gegen nser e IncIudae Into your computer s rive D TRENDNET Gees the folder in which to install TRENDnet Powerline Utility 2 At the CD Autorun Prompt window click Run Autorun exe Setup will install TRENDnet Powerline Utility in the following folder To install in a different folder dick Browse and select another folder Click Install to start the installation Note If the Autorun prompt does not appear automatically open the CD contents and double click Autorun exe 3 At the CD ROM main menu click Install Utility Destination Folder C Program Files TRENDnet TRENDnet Powerline Utili Install Utility User s Guide Product Registration Exit 4 At the Powerline Configuration Utility installation window click Next Completing the TRENDnet Powerline Utility Setup Wizard TRENDnet Powerline Utility has been installed on your Welcome to the TRENDnet computer Powerline Utility Setup Wizard Click Finish to dose this wizard This wizard will guide you through the installation of TRENDnet Powerline Utility It is recommended that you close all other applications before starting Setup This will make it possible to update relevant system files without having to reboot your computer Click Next to continue Copyright 2012 TRENDnet All Rights Reserved 10 TRENDnet User s Guide TPL 406E TPL 406E2K 7 At the WinPcap installer w
36. owerline adapter check your Powerline model http www trendnet com downloads Copyright 2012 TRENDnet All Rights Reserved To change the default encryption key between two Powerline adapters Note Assuming one Powerline adapter is a model listed in the table and the other Powerline adapter being the TPL 303E TPL 304E TPL 308E TPL 309E TPL 311P TPL 406E or TPL 407E In this example the procedure below will reference how to connect a TPL 306E to a TPL 406E Powerline adapter using the Sync button The TPL 306E can be replaced with any of the models in the table and the TPL 406E can be replaced with the TPL 303E TPL 304E TPL 311P or TPL 407E when following this procedure 1 On the TPL 306E push and hold the Sync button for 15 seconds and release it All LEDs will turn off and turn back on This will erase the current encryption key assigned for this Powerline adapter Note If the Powerline adapters were connected prior using the default encryption key once you complete this step the TPL 406E Powerline adapter will not be able to communicate to the TPL 306E Powerline adapter 2 Afterwards push and hold the Sync button on the TPL 306E for 2 seconds and release it The Power PWR LED will start blinking This will initiate the Sync process and generate a random encryption key 3 Within 2 minutes push and hold the Sync button on the TPL 406E for 3 seconds and release it The Power PWR LED will start blinking This
37. r Password Add Scan Copyright 2012 TRENDnet All Rights Reserved SE 6 Click Browse next to the PIB field and navigate to the unzipped folder with the firmware files Select the PIB file Ex TPL 401E PIB v50100 pib Please select appropriate Firmware and PIB files PIB MVM 7 Click Browse next to the NVM field and navigate to the unzipped folder with the firmware files Select the NVM file Ex TPL 401E NVM v5 0 1 0 0 X FINAL nvm 8 Click OK O Please select appropriate Firmware and PIE files Wait until the firmware upload completed and the device reboot Important Do not turn off the device or press the reset button while this procedure is in progress 20 TRENDnet User s Guide TPL 406E TPL 406E2K Technical Specifications Hardware IEEE 1901 HomePlug AV IEEE 802 3 IEEE 802 3x IEEE 802 3u Interface 1x 10 100Mbps Auto MDIX RJ 45 port e Power prong o A North America Type B NEMA 5 15 o EU Euro Type C CEE 7 16 o UK United Kingdom Type G BS 1363 Frequency Band 2 68 MHz Modulation OFDM Symbol Modulation on link synchronization 1024 256 64 8 QAM QPSK BPSK ROBO Carrier Speed Powerline up to 500Mbps Ethernet Up to 200Mbps Full Duplex mode Utility OS Compatibility Windows 7 32 64 bit Vista 32 64 bit XP 32 64 bit Overlapping Up to 4 per electrical system Powerline Networks 128 Bit AES Advanced Encryption Standard
38. r Powerline adapters are also connected to your network If you have changed your encryption key using the Sync button and you are creating a customized encryption key it is required to reset all Powerline devices to defaults using the physical Reset button on your Powerline adapter first before using the utility See Product Hardware Features on page 2 Please ensure that your Powerline adapters are already installed and connected and the Ethernet port on each adapter is connected to a device powered on Upon completing the software installation a desktop shortcut is automatically created Double click the icon to start the utility or open the utility if it is already running Closing the utility will exit the application TRENDnet Powerline Utility You can also launch the utility from the Start Menu programs Start gt Programs or All Programs gt TRENDnet gt TRENDnet Powerline Utility TRENDnet A TRENDnet Powerline Utility 13 Reboot your computer to complete the installation Copyright 2012 TRENDnet All Rights Reserved TRENDnet Powerline Utility 12 TRENDnet User s Guide TPL 406E TPL 406E2K Powerline Utility Overview Main Window Powerline adapter Local Rescans the Powerline Main Privacy Diagnostics About Connect Local Device Local Device s on your computer If your Powerline MAC Address Connected to HomePlug AV 6405 Dees adapter Local Device The Powerline adapter SC
39. res your network This adapter is ideal for use in buildings that interfere with wireless networking signals e Compliant with IEEE1901 and HomePlug AV standards e High speed building wide networking over an existing electrical system e 1x 10 100Mbps Auto MDIX Ethernet port e Adapters automatically connect using an encrypted Powerline signal e One touch Sync button networks changes encryption keys e Three LED indicators Power on off Powerline Connection green best amber better red good off no connection Ethernet Connection solid connection blinking transfer activity off no connection e Connect one 500Mbps Powerline AV Adapter to the Internet and then plug in up to 7 additional SOOMbps Powerline AV adapters for instant building wide connectivity e Share data intensive files play games download music and more at faster data transfer rates e Advanced 128 bit AES encryption to ensure total network security e Support for IPv6 e Supports up to 16 IGMP based IPTV streams e Power Save mode reduces electrical consumption by up to 80 e Neighbor network support for up to 4 overlapping networks e Network signal transmits up to 300 meters 984ft e Auto QoS support through traffic classification and multiple priority queuing e Optional management utility compatible with Windows 7 32 64 bit Vista 32 64 bit and XP 32 64 bit operating systems TRENDnet User s Guide TPL 406E TPL 406E2K Maximum
40. rved TRENDnet User s Guide TPL 406E TPL 406E2K Product Overview TPL 406E TPL 406E2K Package Contents TPL 406E package includes e 1x TPL 406E 500Mbps Compact Powerline AV adapter e Quick Installation Guide e CD ROM Utility amp User s Guide e Network cable 1 5 m 5 ft TPL 406E2K package includes e 2x TPL 406E 500Mbps Compact Powerline AV adapters e Quick Installation Guide e CD ROM Utility amp User s Guide e 2x Network cables 1 5 m 5 ft Copyright 2012 TRENDnet All Rights Reserved Features The 500Mbps Compact Powerline AV Adapter model TPL 406E uses any electrical outlet to create a secure building wide high speed network Two adapters are needed to start a network Connect one adapter to your router and plug another adapter into any outlet on your electrical system for instant high speed network access The compact form factor saves space around crowded electrical outlets This adapter automatically connects to other TRENDnet Powerline AV adapters with no installation required TRENDnet recommends pressing the Sync button to automatically change default encryption keys Use up to 8 adapters to network devices in different rooms without running new cabling Power Save mode reduces power consumption by up to 80 Quality of Service technology prioritizes video audio and online gaming LED displays convey device status for easy troubleshooting Advanced 128 bit AES encryption secu
41. ss Fate Mbps Network not entered Il Last Geen OO 90 4 158483 Eee g OU SU 4 71 ATETA d TT Delete Delete Deletes or removes the selected entry listed in the Remote Device History Log Remote Device Copyright 2012 TRENDnet All Rights Reserved not entered S Save Report Save Report Saves the information contained in the System Information window to a text file on your computer Unknown Jul 20 01 43PM HomePlug Oct 17144744 Print Report Print Report Prints the information contained in the System Information window Close Closes and exits the Powerline Utility application 19 TRENDnet User s Guide TPL 406E TPL 406E2K Powerline Utility Overview About Window Main Privacy Diagnostics About TRENDNET TRENDnet Powerline Utility Version Released System Information Copyright 2005 2010 Atheros Communications Inc All Rights Reserved http www trendnet com License Copyrights Displays copyright Copyright c 1999 2005 NetGroup Politecnico di Torino Italy information Copyright c 2005 2009 CACE Technologies Davis California All rights reserved You can vertically scroll the window to view all of Redistribution and use in source and Binary forme with or without modification are permitted provided that the following conditions are met the copyright information 1 Redistributions of so
42. urce code must retain the above copyright notice this list of conditions and the Following disclaimer Preferences AutoScan Enables or disables the autoscan feature for automatically discovering Powerline adapter or devices Remote Device connected to your Powerline network Close Closes and exits the Powerline Utility application Note It is recommended to keep this option checked Enabled Copyright 2012 TRENDnet All Rights Reserved 16 TRENDnet User s Guide TPL 406E TPL 406E2K Add adapters in the utility and create a customized encryption key If you have not written down the Device Password DPW and MAC address for each of your Powerline adapters please do so as it is required to applying the customized encryption key for all of your Powerline adapters using the utility This information is on the sticker on the inside face of each adapter Note Write down the Device Password DPW 16 digit characters A Z only and MAC Address 12 digit characters a f A F 0 9 of each Powerline adapter first before proceeding Example Location of Powerline Adapter Device Password DPW MAC Address At Router ZAYB VIMV YFAQ ZFPA 00 90 47 15 84 89 John s Room WECC ZZYC WJVY GZRS 00 90 47 15 84 88 UXMA UOUP IQXJ UTYN 00 90 47 1F 1A 85 Note It is recommended to ensure that your Powerline adapters are already installed and connected and the Ethernet port on each adapter is connected to a device power
43. y for safe shipment Customers shipping from outside of the USA and Canada are responsible for return shipping fees Customers shipping from outside of the USA are responsible for custom charges including but not limited to duty tax and other fees WARRANTIES EXCLUSIVE IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE THE CUSTOMER S SOLE REMEDY SHALL BE AT TRENDNET S OPTION REPAIR OR REPLACE THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING Copyright 2012 TRENDnet All Rights Reserved WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF TRENDNET S PRODUCTS TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY THIRD PERSON S MISUSE NEGLECT IMIPROPER INSTALLATION OR TESTING UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCL
Download Pdf Manuals
Related Search