Toshiba IK-7200A Security Camera User Manual
Contents
1. FCC USA INFORMATION NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help USER INSTALLER CAUTION Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not expressly approved by the party 2 CONNECTIONS Notes on connecting e Power plugs of connected equipment must be disconnected before camera installation e A75 ohm appropriate length coaxial cable with co2. IMPORTANT SAFEGUARDS 12 Lightning Read Instructions Read all the safety and operating instructions before operating the product Retain Instructions Retain the safety instructions and instruction manual for future reference Warnings Comply with all warnings on the product and in the instruction manual Follow Instructions Follow all operating and use instructions Cleaning Disconnect this video product from the power supply before cleaning Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards Accessories Do not place this video product on an unstable cart stand tripod bracket or table The video product may fall causing serious injury to a person or serious damage to the product Use only with stand tripod bracket or table recommended by the manufacturer or sold with the video product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer Ventilation This video product should never be placed near or over a radiator or heat register If this product is placed in a built in installation verify that there is proper ventilation so that the camera temperature operates within the recommended temperature range Power Sources This video product should be operated only from the type of power source indicated on the information label If you are not sure of the type of
3. Length approx 31 5 inches 800mm king Screw Clamp Ring 4 7 approx 31 5 inches MountingBracket IIluminance Sensor Focus controller screw Video Wire BNC Tap vw f Zoo Connect to the camera m controller screw Connect the video cable to a monitor or video device The image is displayed when the camera is powered on Length approx 31 5 inches 800mm Do not adjust ie this screw i i8 AGC BLC Selection Switch CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance FIELD INSTALLATION MARKING WORDED THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL CODES
4. YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF THE PRODUCT IN NO EVENT WILL ISD OR ITS PARENT COMPANY OR ANY ASP BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT THIS LIMITATION APPLIES TO DAMAGES OF ANY KIND INCLUDING ANY DIRECT OR INDIRECT DAMAGES LOST PROFITS LOST SAVINGS OR OTHER SPECIAL INCIDENTAL EXEMPLARY OR CONSEQUENTIAL DAMAGES WHETHER FOR BREACH OF CONTRACT TORT OR OTHERWISE OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT EVEN IF TAIS ITS PARENT COMPANY OR AN ASP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR SOME PRODUCTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE THIS LIMITED WARRANTY SHALL BE VOID IF THE PRODUCT OR PARTS HAVE BEEN SUBJECTED TO MISUSE ABUSE ACCIDENT MPROPER INSTALLATION IMPROPER MAINTENANCE OR USE IN VIOLATION OF ISD S WRITTEN INSTRUCTIONS OR WHERE THE PRODUCT HAS BEEN ALTERED OR MODIFIED WITHOUT ISD S PRIOR AUTHORIZATION OR UPON THE REMOVAL OR ALTERATION OF ISD S FACTORY SERIAL NUMBER LABOR SERVICE CHARGES FOR PRODUCT INSTALLATION SET UP AND ADJUSTMENT OF CONTROLS ARE NOT COVERED BY THIS LIMITED WARRANTY No person agent distributor dealer
5. authorized service provider or company is authorized to change modify or extend the terms of this Limited Warranty in any manner whatsoever The time within which an action must be commenced to enforce any obligation of ISD arising under this Limited Warranty or under any statute or law of the United States or any state thereof is herby limited to one 1 year from the date You discovered or should have discovered the problem This limitation does not apply to implied warranties arising under state law Some states do not permit limitation of the time within which You may bring an action beyond the limits provided by state law so the above provision may not apply to You This Limited Warranty gives You spacific legal rights and You may also have other rights which vary from state o state TOSHIBA TOSHIBA AMERICA INFORMATION SYSTEMS INC maging Systems Division e i
6. power supply at your location consult your product dealer Power Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to cords at plugs screws and the point where they exit the product Installation Install this video product on a secure part of the ceiling or wall If installed on an unsecured location the camera could fall causing injury and damage For additional protection on this video product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the power supply and cable system This will prevent damage to the video product due to lightning and power line surges If lightning occurs do not touch the unit or any connected cables in order to avoid electric shock 13 Overloading 14 15 16 Do not overload the power supply or extension cords as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this video product hrough openings as they may touch dangerous electrical points or short out parts that could result in a fire or electrical shock Never intentionally spill liquid of any kind on the video product Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous electrical or other hazards Refer al
7. 3inch O 15mm in the center of the sticker and lead the video and power cables in this hole 5 Align the three holes of the Mounting Bracket with the three plastic anchors insert the supplied screws with camera to corresponding holes 1 Replace original screw by hexagonal screw of accessories and Anchor temporarily fix it 6 X Clamp Ring 2 Adjust the shade to the A Screw best position a Locking Screw 3 Secure this screw by using a wrench not included 3 2 Adjusting the view angle and lens 1 The camera direction can be adjusted horizontally pan max 360 deg and vertically tilt max 90 deg 2 To adjust pan and tilt rotate the Clamp Ring counterclockwise and loosen the two Locking Screws using a screwdriver Gs 6 SPECIFICATIONS 1 Image System Image Device 1 3 inch CCD image sensor Pixel Elements 768 H x 494 V 2 Electrical TV System NTSC 2 1 Interlace 15 734 kHz horizontal 59 94 Hz vertical Horizontal Resolution 480 TV lines typical S N Ratio 48 dB Minimum Illumination 0 lux LED is ON Gain Control AGC High 30dB Low 24dB White Balance Auto White Balance Range 2 500 K to 9 500 K Auto Electronic Shutter 1 60 s to 1 100 000 s Backlight Compensation BLC ON OFF Video Output Signal VBS 1 0 Vp p 75 ohms unbalanced BNC Synchronization System Internal IR LED 36 LEDs 850nm IR Distance 82 feet 25m 3 Mechanical Weight 1 4 Ibs 630 g
8. D age LIMITED WARRANTY CCD SECURITY CAMERA IK 7200A The Imaging System Division ISD of Toshiba America Information Systems Inc makes the following limited warranties with regard to this CCD Camera Model IK 7200A Product These limited warranties extend to the Original End User You r Three 3 Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a period of three 3 years from the date of purchase by the Original End User During this three 3 year period ISD will repair or replace the Product if it does not perform as warranted In order to take advantage of this Limited Warranty You must a call 877 855 1349 to receive a RMA number and b pay all transportation and insurance charges for shipment of the Product to the ASP or Toshiba Exchange Center ISD reserves the right to substitute factory refurbished parts in place of those in need of repair Instruction Manual Owner s Manual You should read the Instruction Manual Owner s Manual thoroughly before operating this Product Before seeking warranty service you should check the troubleshooting guide in the Instruction Manual Owner s Manual and follow the instructions to correct the problem How to Obtain Warranty Service Step by step Procedures To obtain warranty service You should 1 Contact Toshiba America Information Systems Inc at 877 855 1349 to first verify oper
9. P E A A tu atac acs A E IE devises esses 1 2 P ta e e E OTEP TE E EN 1 a Mounting Brack t csee e aE EErEE RE A AE EEr E e casaseedebeadavaeens 1 b INSTFUCTION Manuale esser s a E E EAEE aN EAEE 1 c Screws for Shade sada ad dae Gp Sd eb She Sk nd bade wa se EA POE AEE E E ON E OOA EOE E A 1 d Screws for Mounting Bracket e eereeeseesessteeseesteesesseeetseneeasssessseteeesiseneasieetsentes 3 e Aneho anran eieaa EE EEAS EEA EAEE 3 f Alignment a r A E E E ES 1 For information on our latest products and peripheral devices refer to the following Web page E http www toshibasecurity com The above URL is subject to change without prior notice If the URL changes refer to the Toshiba website http www toshiba com Disclaimer Toshiba TAIS disclaims any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases 1 Fire earthquake or any other act of God acts by third parties misuse by the user whether intentional or accidental use under extreme operating conditions 2 Malfunction or non function resulting in indirect additional or consequential damages including but not limited to loss of expected income and suspension of business activities Incorrect use not in compliance with instructions in this instruction manual Malfunctions resulting from misconnection to other equipment Repairs or modifications made by the user or caused
10. TOSHIBA Leading Innovation gt gt gt CCD COLOR CAMERA IK 7200A Please read this manual thoroughly before use and keep it handy for future INSTRUCTION MANUAL Record in space provided below the Model and the Serial as found on the label on reference the bottom of this unit Model IK 7200A Serial TABLE OF CONTENTS Retain this information for future reference IMPORTANT SAFEGUARDS 1 PART NAMES AND FUNCTIONS ccesssscssstecessesessteteeeeseeseeeeeeesesenaneesessessaeseseeseeseeessaeeseaerereness 4 2 CONNECTIONS wasessncesecetwecinis cs sews cecennsasa sas acceasgesanets niece senwesoegcaes savatasavar tne tatacete cs eneasacs dbereueweee 5 3 INS TAL LAT IO Nitessitsssceesscanceascieseiccey seseavesive sects evan Goan enncb ese cnedcdecearsetce iets oven duetehewedeaecckstoesasiedas 6 4 NOTES ONIUSE AND INSTALLATION cissesccesccsecccecessacteccassssecesccveccosscenscsnecavascsevesesessiecasenss 8 5 IN CASE OF PROBLEMS iitiessetscdenerca cedcaek sesccescoendecncnteescoeccdetedecenvestcesecesceentesesesededesedec sivas 8 6 SPECIFICATIONS tisseisscsssecsnccincctccesenenedesesces cbscteenccascsasvevevavaceoacsdegeussaysheshie ca vcsscacseaeseasaeasaness 9 7 EXTERIOR VIEW 6 iss2isseescececnccercnncen esos cee sed cases spaces dlaeceus tines nsnedeeescaesedeaticdeccisedeseusedesescascedeseaes 10 LIMITED WARRANTY ssistertavtatecsseavesvasrenessetstrateniaviavameniiasranrariaudeawenaecs 11 COMPONENTS 1 aT T NEEN EIEE
11. ation or installation assistance 877 855 1FIX 2 If technical support determines that the unit is defective an RMA will be issued with return instructions for repair 3 Securely pack the Product in the original carton and external shipping pack include a letter explaining the problem with a copy of the bill of sale or proof of purchase 4 Prepay all transportation and insurance costs Your Responsibilities This Limited Warranty is subject to the following conditions 1 You must provide the bill of sale or proof of purchase at the time that warranty service is required 2 You must notify Toshiba America Information Systems Inc at 877 855 1349 within 30 days after you discover that the product does not perform in accordance with specifications during the Limited Warranty period 3 You must pack the Product in its original carton using the original packing material Then insert the original carton containing the Product into another carton with additional packing material before shipping the Product to an ASP or Toshiba Exchange Center DISCLAIMERS ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE
12. camera only Dimension 3 2 W x 3 1 H x 5 4 D inches 81 5mm W x 79 5mm H x 137 5mm D excluding protrusion and mounting bracket Ingress Protection Rating IP66 4 Optical Built in Lens f 3 7 10 mm F 1 6 View Angle of Lens 27 77 H 21 57 V 5 Power Input Voltage 12V DC 10 Current Consumption 0 4A MAX 3 Turn the camera to the desired position rotate the Clamp Ring clockwise to secure the camera 4 To adjust zoom and focus loosen two controller screws and move them to the desired position 5 Tighten zoom and focus controller screws To secure these screws tightly be sure to tighten them using a screwdriver 6 To secure the camera tightly be sure to tighten the two Locking Screws using a screwdriver Note e Adjust the shade position after replacing original screw by hexagonal screw of accessories e Be sure to securely tighten the Clamp Ring 3 3 Adjusting the BLC and AGC AGC and BLC selecting switches are internally located To adjust these switches rotate the cap counterclockwise After adjusting rotate the cap clockwise Make sure that the cap has been tightly secured to the camera using a screwdriver 1 Backlight Compensation BLC The exposure is automatically adjusted so that the best picture is obtained at a monitor zone of about 50 in the horizontal and about 50 in the vertical directions The factory setting is ON 2 Auto Gain Control AGC Camera maximum
13. gain can be selected High 30dB or Low 24dB The factory setting is High If the image is noisy in low light change this switch to Low 3 4 Day Night Function This camera is equipped with near infrared LEDs IR LED of 850nm The LEDs turn on automatically when it becomes dark The human eye cannot clearly see the light of the LEDs This camera is able to clearly produce monochrome images at a range of less than 82 feet 6 Environmental Operating Temperature 14 F to 122 F 10 C to 50 C and humidity 20 to 90 RH Storage Temperature 4 F to 140 F 20 C to 60 C and humidity 90 RH Design and specifications are subject to change without notice 7 EXTERIOR VIEW 2 4 O62 1 25 3 0 2 5 an 2 1 54 3 1 79 5 2 8 70 Bid 4 2 106 0 24 8 3 2 81 5 5 4 137 5 Dimensions Inch mm 10 4 NOTES ON USE AND INSTALLATION e Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off e Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear A vertical stripe may appear on the screen However this is not a malfunction e Treat the camera with care Do not drop the camera or subject it to intense vibration e Never touch inte
14. l servicing to qualified service personnel Damage Requiring service Disconnect this video product from the power supply and refer servicing to qualified service personnel under the ollowing conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product does not operate normally by following the operating instructions in the instruction manual Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation d If the video product has been dropped or the cover has been damaged e When the video product exhibits a distinct change in performance which indicates a need for service 17 Replacement Parts When replacing parts be sure the service technician uses parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 18 Safety Check 1 PART NAMES AND FUNCTIONS Shade Camera Lens Loc Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine that the video product is in proper operating condition Power Input Wire Connect the power cable to 12V DC
15. nnector 8C 2V max 656 feet 200 m 5C 2V max 820 feet 250 m is required for standard connection e For details of wiring and operation of equipment to be connected refer to their operation manuals e A power supply with cable connectors and coaxial cable are not supplied with the camera e Connecting the video and power cable outdoors use a waterproof junction box For details refer to the manual 75 ohm coaxial appropriate length cable Display Monitor BNC Connector 45 D ORed Connector 12V DC power supply GND Black This Power Connector is provided as an accessory Recommended power cord is a minimum wire size of 18 AWG Do not overload power supply The recommended power supply for this camera is 9 watts minimum at 12V DC 3 INSTALLATION Notes e The attached screws and anchors are used to install the camera to a solid surface e g concrete If installing to loose or thin material surfaces use the appropriate anchors not included with the screws e Install the camera tightly 3 1 Mounting the camera to a solid surface 1 Attach the Alignment Sticker to the surface 2 Drill three pilot holes O0 28inchx1 57inches D 7mmx40mm D through the three circles on the sticker 3 Hammer the supplied plastic anchors into the holes 4 Drill a hole 0 6
16. rnal parts Do not touch the internal parts of the camera other than the parts specified e Do not submerge in water Install the camera where the camera can be used indoors or outdoors according to IP66 code If the camera was dropped in the water turn off the power and contact your dealer e Keep the camera installation away from video noise If cables are wired near electric lighting wires or a TV set noise may appear in images In this event relocate cables or reinstall equipment e Check the ambient temperature and humidity Avoid using the camera where the temperature is hotter or colder than the specified operating range Doing so could affect the internal parts or cause the image quality to deteriorate Special care is required to use the camera at high temperature and humidity e Should you notice any trouble If any trouble occurs while you are using the camera turn off the power and contact your dealer If you continue to use the camera when there is something wrong with it the trouble may get worse and an unpredictable problem may occur 5 INCASE OF PROBLEMS Condition Check Points No image e Are the camera and connected equipment turned on e Are wires connected correctly Unnatural color e Is the display monitor adjusted correctly e Is the lighting too dim Flicker noise e Under the fluorescent lamp of 60Hz flicker noise rarely occurs Defocusing at night e Readjust the focus at night mode that turned on the IR LE
17. to be made by the user and carried out by an unauthorized third party Notwithstanding the foregoing Toshiba s liabilities shall not in any circumstances exceed the purchase price of the product Copyright and Right of Portrait There may be a conflict with the Copyright Law and other laws when a customer uses displays distributes or exhibits an image picked up by the camera without permission from the copyright holder Please also note that transfer of an image or file covered by copyright is restricted to use within the scope permitted by the Copyright Law O oR Oo Protection of Personal Information Images taken by the camera that reveal the likeness of an individual person may be considered personal information To disclose exhibit or transmit those images over the internet or otherwise consent of the person may be required Usage Limitation The product is not designed for any critical applications Critical applications means life support systems exhaust or smoke extraction applications medical applications commercial aviation mass transit applications military applications homeland security applications nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage Accordingly Toshiba TAIS disclaims any and all liability arising out of the use of the product in any critical applications ois 10 11
Download Pdf Manuals
Related Search