Home

Toshiba Flat Panel Television Flat Panel Television User Manual

Contents

1. U One size does NOT fit all Use appropriate furniture large enough to support the weight of your TV and other electronic components U Use appropriate angle braces straps and anchors to secure your furniture to the wall but never screw anything directly into the TV U Carefully read and understand the other enclosed instructions for proper use of this product U Do not allow children to climb on or play with furniture and TVs U Avoid placing any item on top of your TV such as a VCR remote control or toy that a curious child may reach for tU Remember that children can become excited while watching a program and can potentially push or pull a TV over C Share our safety message about this hidden hazard of the home with your family and friends Thank you A 2500 Wilson Bivd F a Arlington VA 22201 U S A Tel 703 907 7600 Fax 703 907 7690 R www C org d gau 8 CEA is the Sponsor Producer and sl Renate Manager of the international CES Important Safety Instructions 1 Read these instructions eu 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources
2. Push up Push up Right pocket panel TVNVIDE Channel VA Headphones u Menu VA VIDEO 3 jack Volume lt gt INPUT Menu lt gt Wail outlet 120V AC UU 50 60Hz Power Cord DVI HDCP ANT OUT AUDIO IN ANT 1 IN ANT 2 IN DVI HDCP IN VIDEO 1 2 VIDEO TheaterLink ColorStream AUDIO OUT OUT HD 1 Variable AUDIO OUT ColorStream HD 2 Connecting your TV Note One TheaterLink cable is provided with your TV No other cables are provided Coaxial cable is the cable that comes in from your antenna cable TV service or cable converter box Coaxial cable has F connectors Standard stereo A V cables usually come in sets of three and are typically color coded according to use yellow for video red for stereo right audio and white for stereo left or mono audio Your TV s standard AM inputs are color coded in the same manner as the cables S video cable is for use with video equipment that has an S Video connector Component video cables come in sets of three typically color coded red green and blue and are for use with video equipment that has component video connectors Your TV s ColorStream component video inputs are color coded in the same manner as the cables DVI D digital single link cable is for use with video equipment that has a DVI D digital single link co
3. CAUTION Do not plug in any power cords until you have finished connecting all equipment Connecting a VCR This connection allows you to watch local channels and video Note programs watch video tapes and record one channel while watching f you have a mono VCR connect L Mono to another channel VCR Audio OUT using only one audio cable You will need lf you have a VCR with S video use an S fore cotal cables video cable instead of the standard video cable one set of standard A V cables From Cable Box or Antenna Stereo VCR The unauthorized recording use distribution 7 or revision of television programs videotapes DVDs and other materials is prohibited under oe Aue _ G oo _ Ou TYN TA the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability OUT NNT 2 ANTC 5 OY _ Connecting a cable converter box Note When you use a converter box with your TV This connection allows you to watch basic and premium cable i the remote control will not operate some channels f R features such as programming your favorite To use the T V s features select ANT 1 To view premium channels channels labeling channels and locking select ANT 2 tune the TV to channel 3 or 4 whichever channel is channels vacant in your area and use the converter box to change channels You will need e three coaxial cables
4. Current channel J Lower channels Channel label if set Repeatedly press or hold Channel A or W while the SpeedSurf mode is on screen to scroll the channel list Release the button to display the highlighted channel TV front panel ATO MENU VOLUME CHANNEL MENU lt PVA Channel VA Channel Number MENU Av lt gt Channel AV Using the TV s features Adjusting the channel settings Switching between two channels using Channel Return The Channel Return feature allows you to switch between two channels without entering an actual channel number each time To switch between two channels Channel 1 Select the first channel or video mode you want to view Number 2 Select a second channel using the Channel Number buttons 0 9 100 3 Press CH RTN The previous channel will be displayed Each time you press CH RTN the TV will switch back and forth between the last two channels that were selected Switching between two channels using SurfLock The SurfLock feature temporarily memorizes one channel in the CH RTN button so you can return to that channel quickly from any other channel by pressing CH RTN To memorize a channel in the CH RTN button CH RTN INPUT 1 Select the channel you want to program into the CH RYN button 2 Press and hold CH RI N for about 2 seconds until the message Channel Memorized appears flashing on screen The channel has been programmed into the
5. gaem P PICTURE ANTENNA MODE STANDARD 12 n NOE The PICTURE qualities you adjusted can be saved in the TV s memory with the SAVE NEW PREFERENCE feature see page 50 You can keep these settings or choose factory set options as described under Selecting the picture mode above 49 50 Saving your new preferences You can save the picture qualities you adjusted contrast brightness color tint and sharpness in the PICTURE menu PREFERENCE mode To save your new preferences 1 Press MENU and then press lt or until the PICTURE menu appears 2 Press A or W to highlight SAVE NEW PREFERENCE 3 Press or The menu displays DONE DOSoaS PICTURE ANTENNA MODE PREFERENCE CabieCtear DNR AUTO TEMPERATURE MEDIUM ae VS AME NEW PREP ERENCE il ROME 20 MENU i You can choose your saved preferences by selecting PREFERENCE see Selecting the picture mode on page 49 Using CableClear DNR Digital Noise Reduction CableClear DNR reduces visible interference in your TV picture This is useful when receiving a broadcast with a weak signal or playing back a video cassette or disc damaged by repeated use To turn on CableClear DNR 1 Press MENU and then press or P until the _ PICTURE menu appears GC PICTURE ANTENNA 2 Press A or W to highlight see DF pmo Note CableClear DNR CTEMPERATURE MEDIUM The CableClear DNR
6. ES VIDEO LABEL BACKGROUND SLEEP POWER Number MENU ENTER Ava Note When an instant power failure occurs the timer setting may be cleared To display the arnount of time left until the TV turns on or off automatically press RECALL Adjusting the sound Muting the sound Press MUTE to temporarily reduce 1 2 M UTE or turn off MUTE the sound While the sound is reduced the screen display 1 2 MUTE or MUTE in the lower right corner Each time you press MUTE the mute mode will change in the following order gt Normal gt 1 2 MUTE gt MUTE J When you select MUTE mode the closed caption feature is automatically activated To deactivate this feature deactivate MUTE This feature works only when the closed caption mode is set to OFE See Using the closed caption feature on page 53 for more information Selecting stereo SAP broadcasts The multi channel TV sound MTS feature allows you to listen to high fidelity stereo sound while watching TV MTS can also transmit a second audio program SAP containing a second language music or other audio information when provided by individual stations When the TV receives a stereo or SAP broadcast the word STEREO or SAP appears on screen every time the TV is turned on the channel is changed or the RECALL button is pressed The MTS feature is not available when the TV is in VIDEO mode To listen to stereo sound 1 Press ME
7. Learning about the remote control The buttons used for operating the TV only are described here For a complete list of the remote control s functions see the Remote Control functional key chart on pages 20 21 POWER turns the TV on and off SLEEP allows access to the automatic TV shut off function page 54 LIGHT The first press of the LIGHT button lights the keypad and turns on the Illumination mode With the Illumination mode on pressing any other key lights the keypad for 5 seconds 10 seconds if you re in programming mode Subsequent presses of the LIGHT button toggle between turning the Illumination mode on and off Channel Numbers 0 9 100 allow direct access to channels page 31 MODE cycles through the six device modes TV CABLE SAT VCR DVD AUDIO1 and AUDIO2 The mode indicator light will remain lit for a few seconds page 22 PIC SIZE cycles through the five pictures sizes Natural Theater Wide 1 2 3 and Full page 35 FAVORITE allows access to the favorite channel search function page 42 MENU allows access to on screen programming menus page 27 ENTER sets programming menu information page 27 AY select or adjust programming menus page 27 FAV AVcycles through favorite channels page 33 CH AY cycles through programmed channels page 30 VOL AY adjusts the volume level EXIT exits the programming menus page 27 INPUT selects the video input source page 51 MUTE mutes the sound page 55
8. RECALL displays on screen information page 62 CH RTN returns to the last viewed channels page 32 POP CH AY selects the POP picture out picture channel page 39 SPLIT turns the POP feature on and off page 39 CH SCAN allows access to the programmed channel search function page 41 FREEZE freezes the POP picture page 40 SWAP switches the main and POP pictures page 40 POP DIRECT CH allows direct access to POP channels page 39 SOURCE selects the POP picture source page 39 A CH M EXIT HYD OLEAN WERI H RATNE INPUT RECALL WEITH al gt Bal Ivi p DISC Note The error message Not Available will appear if you press a key for a function that is not available Setting up your TV Learning about the menu system After you have installed the batteries and programmed the remote control you will need to set some preferences on the TV using the menu system You can access the menu using the buttons on your TV or remote control 1 Press MENU to display the menu system 2 Press or 1 to select a menu 3 Press A or W to select an item 4 Press l or P to select or adjust a setting OOO PICTURE ANTENNA SPORTS PICTURE ANTENNA MODE SPORTS COLO TEMPERATURE SAVE NEW PREFERENCE df THEATER Dolby Virtual OFF SRS 3D FOGUS ENGLISH PICTURE SGR CINEMA MODE SELEGT ROD ERASI AOE BACKGROUND
9. 30 Adding channels to the TV s memory When you press Channel A or V your TV will stop only on the Note channels you program into the TV s channel memory To tune the TV to a channel not programmed in the channel memory you must use the Channel Number buttons on the remote control Follow the steps below and on the next page to program all active channels into the TV s memory Programming channels automatically Your TV can automatically detect all active channels in your area and store them into its memory After the channels are programmed automatically you can manually add or erase individual channels see page 31 To program channels automatically 1 Press MENU and then press lt or P until the SET UP menu appears 2 Press A or W until TV CABLE is highlighted 3 Press or P to highlight either TV or CABLE depending on which you use If you use an antenna highlight TV if you use cable highlight CABLE Channel Number MENU 50000 SET UP LANGUAGE ENGLISH ANI id oS 7 Av lt gt Channel AV PROGRAM DD ERASE ADD QUICK CONNECT GUIDE gt 4 Press W to select CH PROGRAM A T z oH PHOGRAI oe ADD ERASE QUICK CONNECT GUIDE 5 Press lt or P to start channel programming The TV will automatically cycle through all the TV or Cable channels depending on which you selected and store all active channels in the channel memory While the TV is cycling through t
10. 500006 MAIN Outputs the sound of the main program through the AUDIO OUT terminals POP Outputs the sound of the POP program through the AUDIO OUT terminals Using the StableSound feature The StableSound feature limits he highest volume level to prevent extreme changes in volume when the signal source is changed for example to prevent the sudden increase in volume that often happens when a TV program switches to a commercial To turn on the StableSound feature 1 Press MENU and then press lt l or P until the AUDIO menu appears 2 Press A or W to highlight STABLE SOUND 3 Press lt or P to select ON mean To turn off the StableSound feature Highlight OFF in step 3 above Note Make sure the volume control of your audio amplifier is set to a moderate listening level Avd Note When the POP is not on the screen the sound of the main program is output even if the POP sound is selected 59 60 Adjusting the long life features The long life settings Picture shift Reverse White and Gray level are to mitigate the phosphor burn in of the plasma screen Note Picture shift 5 basis _ of Gb O f i icture shift function activates as default Se The picture moves around the screen intermittently Select ON to ON reduce the phosphor burn in of the plasma screen To activate the picture shift 1 Press MENU and then press lt or P until the SET UP menu ap
11. After 4 seconds THIS PROGRAM HAS BEEN BLOCKED TVPG L EXCEEDS SET LIMITS v THIS PROGRAM HAS BEEN BLOCKED TV PG L v EXCEEDS SET LIMETS PUSH MUTE TO ENTER PIN PUSH MUTE TO ENTER PIN CABLE 9 CABLE 9 2 To temporarily unlock the program press MUTE 3 Press the Number buttons 0 9 to enter your 4 digit PIN code and then press Enter BLOCKING ACTIVE ENTER PIN CODE TO TEMPORARILY UNABLOCK 0 9 TO SELECT ENTER TO SET If the correct code is entered the program lock mode is released and the normal picture appears All locking is disabled until the TV is turned off and will be enabled when the TV is turned on again Locking channels You can use the CH LOCK feature to lock specific channels You will not be able to tune locked channels with either the Channel A VW buttons or Channel Number buttons unless you clear the setting You can lock a maximum of nine channels To lock channels 1 From the LOCKS menu select CH LOCK 2 Press or P to display the CH LOCK menu CH INPUT will be highlighted 3 Press the Channel Number buttons to enter the channel you want to lock 4 Press ENTER V CHIP eee ING OFF MPAA RATING ou FOR LOOK VIDEO LOCK V CH IP ENABLEBLOCK ING OFF TV RATING MPAA RATING BLOCK LNG OPTIO
12. From Cable 10 Connecting a cable converter box and VCR This connection allows you to watch and record basic and premium cable channels watch videotapes and record one channel while watching another channel To use the TV s features select ANT 1 To view premium channels or record with the VCR select ANT 2 tune the TV and VCR to channel 3 or 4 whichever channel is vacant in your area and use the converter box to change channels You will need one cable signal splitter five coaxial cables one set of standard A V cables From Cable iN rom ANT OUTIO LV CHS Note ff you have a mono VCR connect L Mono to VCR Audio OUT using only one audio cable if you have a VCR with S video use an S video cable instead of a standard video cable When you use a converter box with your TV the remote coniro will not operate some features such as programming your favorite channels labeling channels and locking channels The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability 11 12 Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD satellite VCR and TV programs and record one channel while watching another channel You will n
13. SELECT TONA OFF i lt mi gt i 20 MPAA RA veve RONT ate LOOK NEW CODE SELECT WS END Press ENTER to activate the function settings in the menus If you do not make a selection within 15 seconds the main menus closes automatically the other menus close automatically within 6 seconds To close an on screen menu instantly press EXTT TV front panel MENU 4 vYA MENU ENTER Ava EXIT Note You can change the background of the menu See page 52 for details 28 Using the Ouick Connect Guide The Ouick Connect Guide automatically starts the first time the TV is turned on This feature provides on screen instructions to guide you through initial setup of your TV To manually start the Ouick Connect Guide and change the current settings 1 Press MENU and then press lt or P until the SET UP menu appears 2 Press A or W to highlight QUICK CONNECT GUIDE MENS DADOS Ava EXIT 3 Press or P to enter the Quick Connect Guide mode Advance through the setup according to the guide displayed on screen Press 4 or P to make a selection Press MENU to continue to the next screen The Ouick Connect Guide will guide you through the following items To stop the Ouick Connect Guide Press EXIT or turn off the TV Changing the on screen display language You can choose from three different languages English French and Spanish for the on s
14. To label the video input sources 1 Press MENU and then press lt or P until the CUSTOM menu appears 2 Press A or W to highlight VIDEO LABEL eb 8 amp 8 EB ED E4 Ti ds Sheer gno l n E T ris Hi GR i wi OM IDEO UNBEL Nine The HD high definition label is available for DVI mode only see Selecting the video input source above and Connecting a 3 Press or P to display the VIDEO LABEL menu device to the DVI HDCP IN terminal on page 16 MENU Press A or Y to highlight the video source you want to label 5 Repeatedly press or P to select the desired label for that input source a a Color Stream HD1 a olor Stream HD2 n a CUSTOM MENU b 6 Finish labeling the other video sources as desired To return to the previous menu press A or W to highlight CUSTOM MENU and then press or P 7 To exit the menu press EXIT Selecting the background of the menu display You can change the background of the menu display by selecting from two preset types shaded and solid black To select the background 1 Press MENU and then press lt or P until the CUSTOM menu appears 2 Press A or W to highlight BACKGROUND 3 Press lt 4 or P to select either a SHADED or SOLID background MENU GaG Avd Using the closed caption feature The closed caption feature has two options Captions An on screen display of the dialogue
15. Wide 1 Theater Wide 2 Theater Wide 3 and Fall The way the image displays n any of the picture sizes will vary depending on he formar of the program you are viewing Select the picture size that displays the current program the way that looks best to you Selecting the picture size 1 Press PIC SIZE on the remote control 2 Press the corresponding number button to select the desired P g picture size as described below and on the next page PICTURE SIZE 9 4 TO SELECT Natural p cture size The picture is displayed close to its or ginally formatted proportion Some program formats will display with side bars and or bars ac the top and bottom see examples below Natural picture size examples The way the image displays will vary depending on the format of the Program you are currently watching Number PIC SIZE aAY lt Note The PICTURE SIZE feature may not be available for some program formats You also can change the picture size by selecting PICTURE SIZE in the THEATER menu 2 O f 5 EM Dob Virtual wow NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display Avoid displaying stationary images on your Plasma display for extended periods of time Fixed non moving images such as still PIP POP windows or black gray bars n 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COV
16. and Theater Wide 3 only The scroll amounts are as follows Wide 1 Not adjustable Wide 2 20 to 10 Wide 3 20 to 10 NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display Avoid displaying stationary images on your Plasma display for extended periods of time Fixed non moving images such as still PIP POP windows or black gray bars n 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 Using the auto aspect feature When receiving 480i signal the TV will automatically change the Note picture size by reading aspect information ID 1 data from the input This feature does not operate for the antenna signal If the signal does not include aspect information ID 1 data cable and DVI input sources the picture size mode you set is selected To turn on the auto aspect 1 Press MENU and then press l or P until the THEATER menu appears Virtual OFF ECE ass OFF PICTURE SIZ EE AVE B SEROL gt I NEMA MODE V DEO 2 Press A or W to highlight AUTO ASPECT and then press 4 or P to select ON OF Dolby Virtual OFF Wow NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display a i Avoid displaying stationary images on Picture size to be selected _ your Plasma display for ext
17. and channels 3 and 4 You will not be able to select the locked input sources with the TV VIDEO INPUT or Channel button unless you clear the setting To set up the video lock 1 From the LOCKS menu select VIDEO LOCK 2 Press or Pe to highlight the level of video locking you want as follows VIDEO Locks VIDEO 1 VIDEO 2 VIDEO 3 ColorStream HD1 HD2 and DVI VIDEO Locks VIDEO 1 VIDEO 2 VIDEO 3 ColorStream HDI1 HD2 DVI and channels 3 and 4 Select VIDEO if you use the antenna terminal to play a video tape OFF Unlocks all video input sources esa MA Si f LOCKS VENADUE BLOCKING ON TV RATING b MPAA RATING OR SSeYNG OPTION i z Ge ER FRONT PANEL LOCK F NEW PIN CODE OPF Using the game timer This feature allows you to restrict the time which has chosen the video Note mode When the time set up beforehand is passed the last tuned channel After the game timer set is operated set the will be selected automatically The VIDEO LOCK is set to VIDEO VIDEO LOCK to OFF is necessary To set the game timer 1 From the LOCKS menu select GAME TIMER 2 Press 4 or W to select the length of time until the video mode is blocked from among 30 60 90 and 120 minutes When the number is highlighted the timer will start countdown PAE V CHI P ENABLE BLOCKING ON TV RATING MPAA RATING BLOCKING OPTION Select OFF in ste
18. one TheaterLink cable included one piece of double sided mounting tape included With this connection point the Toshiba TV remote control at the front of the TV Front of infrared controlled device to operate both the TV and the infrared such as a Toshiba infrared controlled controlled device You also can point VCR or DVD player the device s remote control at the TV to TheaterLink f operate the device but you also will cable s infrared need to use the TV s remote control to eye facing device s infrared sensor Back of TV operate the TV Ee eee The TheaterLink OUT function has been verified for use with Toshiba infrared controlled devices Due to the wide variation in remote control operation among manufacturers these functions may or may not operate with other brands 18 Connecting an audio system This connection allows you to hear the TV sound through external speakers connected to an audio amplifier To control the audio through the amplifier turn on the TV and the amplifier sec the volume of both to a moderate level and turn off the TV s built in speakers see Turning off the built in speakers on page 58 You will need one pair of standard audio cables Amplifier Note lf the volume of either the TV or the amplifier is set to O or OFF you will not hear any sound Using the remote control Preparing the rem
19. the TV RATING menu 3 Press W or A to select item 4 Press to lock displays X LOCKS TV RATING MA 14 PG QG Bi ALOG W v Gu E x x v A WAGE Y a Press 4 to unlock displays V VSG Sy nating y 5 Repeat steps 3 and 4 to set vecHip MENU OF the next item The age based TV ratings and content themes you can lock are listed in the table below Mature Audience Only This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17 L Crude or indecent language S Explicit sexual activity V Graphic violence Parents Strongly Cautioned This program contains some material that many parents would find unsuitable for children under 14 years of age D Intensely suggestive dialog L Strong coarse language S Intense sexual situations V Intense violence Parental Guidance Suggested This program contains material that parents may find unsuitable for younger children D Some suggestive dialog L Infrequent coarse language S Some sexual situations V Moderate violence General Audience Most parents would find this program suitable for all ages Directed to Older Children This program is designed for children age 7 and above Note Programs in which fantasy violence may be more intense or more combative than other programs in this category are designated Y7FV All Children This program is designed to be appr
20. 0 9 and the 4 digit PIN code used for blocking then press ENTER channels and then press ENTER een oe GAWN AW A H the wrong PIN code is entered the message Incorrecv appears Enter the code again and then press ENTER If you cannot remember your PIN code While the PIN code entering screen is displayed press RECALL four times within five seconds The PIN code will be released blocking reset status restored aen O KS Continue to set each item following the steps on the next page Nate The V Chip function is available only for the U S V Chip system The Canadian Chip system is not supported Number MENU ENTER Ava RECALL 43 44 Using the V CHIP menu Some TV programs and movies include signals that classify the content of the program dialog language sex violence The V CHIP control feature in this TV detects the signals and blocks the programs according to your selections To use this feature perform the following setup ENABLE BLOCKING 1 From the LOCKS menu select ENABLE BLOCKING 2 Press lt or P to select ON or OFE ON To enable your V CHIP setting Lock OFF To release your V CHIP setting Unlock Note The CH LOCK function is not affected by the ENABLE BLOCKING setting TV RATING Independent rating system for broadcasters 1 From the LOCKS menu select TV RATING 2 Press lt or P to display cS gt a
21. 0120 0132 0123 0124 0121 0122 0124 0100 0145 0105 0139 0110 Olli 0100 0111 0145 PHILCO 0131 0124 0127 0123 0126 0120 0143 PHILIPS 0131 0123 0124 0173 PIONEER 0123 PROSCAN 0145 0100 0123 0124 0131 0146 0101 0102 0133 0174 QUASAR 0121 0122 0123 0124 RADIO SHACK 0133 0124 0105 0136 0109 0140 0127 RCA 0133 0145 0100 0123 0124 0131 0146 0101 0102 0170 0172 0174 0176 0183 REALISTIC 0124 0105 0136 0109 0140 0127 SAMSUNG 0137 0102 0104 0133 SAMTRON 0163 SANSUI 0139 0126 0120 0152 SANYO 0105 0109 0113 SCOTT 0101 0102 0104 0109 0138 0140 0147 0148 0126 0120 SEARS 0105 0106 0107 0108 0100 SHARP 0135 0136 0167 0162 SHINTOM 0117 SIGNATURE 2000 0127 0135 SINGER 0117 SONY 0128 0129 0130 0153 0154 0155 SV2000 0127 SYLVANIA 0131 0123 0124 0127 0178 SYMPHONIC 0127 0168 0177 TASHIRO 0106 TATUNG 0139 0110 0111 TEAC 0139 0110 0127 0111 TECHNICS 0121 0122 0123 0124 TEKNICA 0124 0127 0112 THOMSON 0179 0183 TOSHIBA 0101 0146 0166 0160 VECTOR RESEARCH 0111 WARDS 0135 0136 0109 0144 0106 YAMAHA 0105 0139 0110 0111 ZENITH 0144 0106 0169 0180 Cable box setup codes Brand ABC ARCHER CABLEVIEW CITIZEN CURTIS DIAMOND EAGLE EASTERN GCBRAND GEMINI G L JERROLD HAMLIN HITACHI MACOM MAGNAVOX MEMOREX MOVIETIME OAK PANASONIC PHILIPS PIONEER PULSAR P
22. 4 7k ohm VARIABLE AUDIO OUTPUT 0 300 mV rms 30 modulation equivalent 4 7k ohm DVI HDCP INPUT HDCP compliant E EDID 1 3 compliant DVI D uncompressed high speed digital single link connection Suggested input scan rates 1080i 720p 480p 480i Headphones jack 3 5 mm stereo E EDID Enhanced Extended Display Identification TheaterLink OUTPUT 3 V p p 10k ohm Dimensions Width 51 57 64 inches 1318 mm Height 27 15 32 inches 698 mm Depth 4 57 64 inches 124 mm Mass weight 108 5 Ibs 49 2 kg Operaring condition Temperature 32 F 95 F 09C 35 C Humidiry 20 80 no moisture condensation Exemptions TACP THI TCL are not liable for 1 damage caused by fires natural disaster such as thunder earthquake etc use by third person accidents owner s misuse or use in other improper conditions O incidental damages such as profit loss or interruption in business modification or erasure of record data and so forth caused by use or misuse of this product 3 damage caused by neglect of the instructions described in the owners manual and 4 damage caused by misuse or malfunction through simultaneous use of this product and the connected equipment 64 Troubleshooting Before calling a service technician please check the following table for a possible cause of the problem and some solutions Probiem Solution FV will not turn on No picture no sou
23. 4 or P until the THEATER menu appears 3 Press A or W to highlight the desired WOW feature you want to adjust SRS 3D FOCUS or TruBass and then press or P to adjust the item THEATER Dolby Virtual ON WOW Ee FRWD 7 56 Adjusting the sound guality You can change the guality of your T V s sound by adj usting the bass treble and balance To adjust the sound quality 1 Press MENU and then press or Je until the AUDIO menu appears 2 Press A or W to highlight the item you want to adjust BASS TREBLE or BALANCE med P suo MENU Avd 3 Press lt or P to adjust the level makes the sound quality weaker or decreases the balance in the right channel depending on the item selected P makes the sound quality stronger or decreases the balance in the lefr channel depending on the item selected Resetting your audio adjustments The RESET function returns your audio adjustments to the following factory settings Bass ERR center 50 Treble 00001000000 center 50 Balance center 0 To reset your audio adjustments 1 Press MENU and then press or P until the AUDIO menu appears 2 Press amp or W to highlight RESET 3 Press or P The menu displays DONE 57 Using the sub bass system SBS The sub bass system allows you to enhance bass performance even when the volume is low To turn on the SBS 1 Press MENU
24. 5 for other channels To select your favorite channels Press FAV AV To quickly scan through your favorite channels in a 7 picture multi window Press FAVORITE see page 42 Channel Number To clear a favorite channel 1 Press MENU and then press or J gt until the CUSTOM menu appears 2 Press A or Y to highlight FAVORITE CH2 for example 3 Press or P to display the FAVORITE CH2 menu 8 amp 8 E9 8B iS MENU FAVORITE ENTER AY lt FAV AV CUSTOM TIMER N 9on9om LEEP oncom o nA FRAGU a VIDEO LABEL 5 5 20 BACKGROUND TV CABLE AFAN EY adapta xa ania CLEAR ALL b 4 Press AVP to highlight the channel you want to clear and then press ENTER 00000 CUSTOM TIMER Sheer Bream cc OFF AER a a INPUT oto BACKGROUND t8 d8 TV CABLE wi EAR ALE 8 5 Repeat step 4 for other channels To clear all favorite channels at once Press A or W to highlight CLEAR ALL in step 4 above and then press or p gt N oonoom LEEP onGom OFF 1DEO LABEL BACKGROUND 33 34 Labeling channels Channel labels appear above the on screen channel number display each time you turn on the TV change the channel or press RECALL You can choose any four characters to identify a channel To create channel labels 1 Press MENU and then press lt or P until the Channel CUSTOM menu appears Number 2 Press A or W to highlight CH LABELI
25. 54 Picture adjustments COLOR TEMPERATURE eee eeeeeeseeusessennnineuuueeuens 50 Picture mot ase ui eiii drasiedi ddao 49 Picture quality osrstenie 51 Picture out picture POP POP CH AW buttons u eeeuoeueuuiseiueeinn 39 SOURCE button e ee eeessnnuuneueeneeuniuueieeiuuiuuueue 39 FREEZE button SWAP button Picture soroll eenaa Picture size selection e eee uuuueeuueiiuueeeiuoou 35 Quick connect guid6 eeuuoeiiseiuusiuoosiuneeh 28 R RECALL butt0n auuseeeieenie ueu yR su gd 0o yddo 62 Remote control Battery installation e uuuouoeeseuusiuuosiioeoiuneu 19 Device code table s cssssssssessssssssssesenssesessees 24 25 Functional key chart esssssssssesscsssssessessseessens 20 21 Learning about the buttons uu 26 Operational feature reset eee 23 Programming seater Ff dydd 22 Volume Lock feature uuueeiueeueseuooooe 23 RESET ue i ne DR lud 51 57 S S video cabl S na cein iL UL Fay irismen 9 SAP Sound ues i iW YTA iei 55 Satellite receiver CONNECTION eee 12 Scrolling the Theater Wide picture 37 Set top DOX LA IG Se ec Sleep Ume su Gin wd RY Sound quality adjustments SPEAKERS on off e eeeeeeueneiuieneieeiuuueuon Specification8 SpeedsSurf useeeeeee9 00 SRS 3D uu nu anTE StableSound Stereo so
26. 6 Digit 6 Tuner Digit 6 Digit 6 Remote control device mode selection Selects the lt TV lt TV lt TV lt TV lt TV lt TV lt TV image shape Digit 7 Digit 7 Digit 7 Digit 7 Digit 7 Phono Digit 7 Digit 7 Digit 8 Digit 8 Digit 8 Digit 8 Digit 8 Cassette Digit 8 Digit 8 Digit 9 Digit 9 Digit 9 Digit 9 Digit 9 Aux Digit 9 Digit 9 o Action Menu Menu me one one 100 wee 100 ee 10 me ee ee Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 Digit 0 CH Enter oe oe oe pae pe Guide DVD setup oe one INFO _ TITLE oe on Top menu Favorites Favorites Subtitle TheaterLink me _ Audio mer vee Menu ee Action oe Menu oe oe eat Menu Menu select Menu select Menu select ee ee FAV AV Menu select Menu select Menu select owe Enter Select oe Enter en ee ee Volume Volume Volume Volume Volume Volume Volume Volume up down up down up down up down up down up down up down up down Exit Exit DVD clear we Channel Channel Channel Channel Channel oe wee up down up down up down up down up down i lt TV lt TV VCR input lt TV Input lt TV lt TV Sound mute Sound mute Sound mute Sound mure Sound mute Sound mute Sound muce Sound mute On screen On screen On screen On screen On screen oe display display display display display Previous Previous Previo
27. 6139 FISHER 6105 6106 GARRARD 6117 6120 6121 6123 6119 6107 6134 6140 6141 6145 6148 6151 6100 6101 6111 6145 6136 6129 6132 6129 6121 6110 6114 6115 6108 6118 6120 6122 6124 6125 6127 6150 6129 6130 6149 6108 6125 6127 6124 6147 6137 6138 6131 6152 6110 6146 6113 6105 6110 6146 6142 6143 6120 6128 6144 6112 6116 6118 6127 6124 6125 6140 6141 6145 6102 6103 6104 Receiver setup codes Code 4120 4125 4126 4146 4134 4135 4136 4143 4104 4113 4115 4123 4145 4129 4132 4133 4140 4144 4100 4108 4141 4142 4447 4127 4128 4124 4116 4148 4106 4117 4109 4414 4103 4127 4131 4130 4119 4118 4121 4123 4105 4107 4150 QUASAR RCA SANSUI SHARP SONY SOUNDE SIGH TEAG TECHNICS VICTOR YAMAHA 4149 4418 4121 4103 4105 4127 4131 4130 4149 4103 4111 4139 4134 4137 4122 4138 4112 4113 41ih 4110 4121 4118 4119 4132 4133 4101 4102 Cassette Player setup codes Brand AIWA DENON FISHER JENSEN Jvc KENWOOD MARANTZ NAKAMICHI ONKYO PANASONIC PHILIPS PIONEER RCA SANSUI SHARP SONY TEAC TECHNICS YAMAHA Code 7123 7124 7125 7131 7103 71 4 7129 7130 7132 7133 7100 7107 7102 7105 7108 7109 7113 7116 7118 7122 7121 7104 7106 7126 7127 7128 7134 7135 7105 7110 7112 7131 7119 7120 7110 7111 7135 7116 7118 7117 7101 710
28. 9 uusiooooeuuuooooooou o 7 Welcome co Toshiba ueu eu ed i y FYD GYR 7 Supplied accessori S 9u1 uu19 12195228 7979 888mm mm rn mA 7 Note Regarding Quick Connect Guide 7 Exploring your new TV uuueuueueenniniinieuu inen in Hn nn Hoo 8 Connecting your TV 2 2 2 2 D Connecting a VCR sorciers iiit aS Connecting a cable converter box Connecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a OR Mn ee GA A RG WA Y LA 12 Connecting a DVD player with ColorStream component video and a VCR uueueeeeiiiieiei ini 13 Connecting a DTV receiver set top box with ColorStream component video and a VCR 14 Connecting rwo VCRS 9 14921492272224222 28729 88mm mmm 09 15 Connecting a camcorder 1 1 9 we 15 Connecting a device to the DVIMHDCP uo 16 Connecting a device to the TheaterLink 17 Connecting an audio system 9 euu191 1 9 98nmnnnnhnn 18 Using the remote control 19 Preparing the remote control for use eueue e enenn Installing the remote control batteries Remote Control functional key chart Programming the remote control for use with your audio video devices assirinassi taera ii iiaia 22 Device code setup Searching and sampling the c
29. Appendix 4 4 4 5599292 2 ni nmn9n9 9n n cn OS Spectfiations as ccscestsassscsscsuvssaclivevsssetesvacastisvateraiestassiarsns 63 Troubleshooting ssscccccsissacccssassasesscesacensveceaseauevescvaasoucvess 64 Limited United States Warranty ccccccccseseseeeseseeeeeeeees 65 Limited Canada Warranty ss sseseseessseeseererearsarsecareareeaesee 66 Index ee 67 Introduction Welcome to Toshiba Congratulations You have purchased one of the finest Plasma TVs on the market The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible The model and serial numbers are on the back of your TV Write these numbers in the space provided on the front cover of this manual for your records Instructions in this manual are based on using the remote control You also can use the controls on the TV if they have the same name as those referred to on the remote control Please read all the safery and operating instructions carefully and keep this manual for future reference Supplied accessories Check that you have the accessories and items shown See Important notes about your Plasma TV on page 5 Note Regarding Quick Connect Guide The Quick Connect Guide automatically appears on screen the first time the TV is turned on This feature provides on screen instructions to guide you through the initial setup of your TV 7o stop the Quick Connect Guide either
30. DTV and TV programs You can record from one source while watching a program from another source Your TV has ColorStream component video inputs Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism You will need three coaxial cables two sets of standard A V cables one set of component video cables one pair of standard audio cables From Antenna Stereo VCR 14 Note For the highest possible picture quality use component video cables for a DVI D digital single tink cable between the TV and DTV receiver You can connect component video cables from the DTV receiver to either set of ColorStream terminals on the TV HD 1 or HD 2 The ColorStream HD 1 and HD 2 terminals can be used with Progressive 480p 720p and Interlaced 480i 10801 scan systems lf your DTV receiver is not compatible with component video for DVI HDCP use an S video cable plus an audio connection instead To record from the DTV receiver set the VCR to Line IN To monitor recording from the DTV receiver set the VCR to Line IN and the TV to VIDEO 1 The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Connecting two VCRs This connection allows you to
31. To reset the features While holding down the RECALL button press 8 9 0 0 The Mode indicator will blink two times and then pause and bl nk two more times 24 Device code table VCR setup codes Brand Code ADMIRAL 0135 AIWA 0127 0132 0181 AKAI AUDIO DYNAMIC BELL amp HOWELL BROKSONIC CANON CCE CITIZEN CRAIG CURTIS MATHES DAEWOO DBX DIMENSIA EMERSON FISHER FUNAI GE GO VIDEO GOLDSTAR GRADIENTE HITACHI INSTANT REPLAY JENSEN Jve KENWOOD LG LXI MAGNAVOX MARANTZ MARTA MEMOREX MGA MINOLTA MITSUBISHI MULTITECH NEC OLYMPIC OPTIMUS ORION PANASONIC PENNEY PENTAX 0129 0114 0115 O11G 0139 0111 0105 0113 0120 0126 0180 0123 0125 0143 0106 0105 0129 0106 0145 0124 0127 0143 0101 0124 0175 0139 0110 0111 0145 0143 0126 0119 0103 0125 0142 0120 0118 0105 0108 0109 0107 0113 0165 0127 0126 0120 0134 0133 0145 0124 0137 0151 0163 0149 0150 0182 0106 0170 0171 0168 0134 0156 0123 0145 0100 0127 0168 0124 0123 0139 0139 0110 0111 0134 0157 0158 0184 0185 0139 0110 0106 oil 0159 0127 0106 0100 0107 0108 0105 0109 0131 0123 0124 0173 0139 0110 0111 0106 0124 0109 0138 0140 0147 0148 0141 0142 0100 0145 0138 0140 0147 0148 0141 0142 0161 0164 0147 0127 0104 0139 0110 0111 0134 0124 0123 0128 0121 0135 0106 0126
32. Udd A MU UU y MW i tt A SON a hyw ie ji y a Whe AUU UND Faen WD ary Seren ha pene DD y jo PIE yd YN AONI nh opa i yda y r yn Sal me i y i Hee thee M Aa pnd y It k Len that i RLON CR an gg MEY 2 int Gh o fwr AL aee TM Ry aa pa ay ZF gle iy Ft TD NG SN ores Genta A a YN Bea Si MU ig a 4 At y y y ae A Uy if Tia PIA y toys Oe Gyd bh yll ot WR yng yu gt 7 WON hag oh Z AH Fl ynu Ny hyb ays yrf 8 bord Beto A CA est a9 Lee Uy Pie ve Si f raha YC ag he Mee Aes See Coch 5 45 NY n AA oe Bey rar Tyd HN Refi HA by CU aty o 2 Ags ee Ta BS T A IPA Li A 4 a Y a 7 A tee Dear Customer Thank you for purchasing this Toshiba TV This manual will help you use the many exciting features of your new TV Before operating the TV please read this manual completely and keep it nearby for future reference Safety Precautions WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO GUALIFIED SERVICE PERSONNEL The lightning symbol in the triangle tells you that the voltage Inside this product may be strong enough to cause an electric shock DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF The exclamatlon mark In the trlangle tells you that Important operating and maintenance Instructions follo
33. Using the POP double window feature 39 Switching the main and POP picaures 9 40 Freezing the POP picture nrsiyni irori 40 Adjusting the size of the double window 40 Double Window with keeping aspect ratio 41 Using the programmed channel search function 41 Using the favorite channel search function 42 About the auto favorite feature uei 42 Using the LOCKS menu u ee eennen nn in D Entering the PIN code euueeeuueeiiiesieiisiii nein 43 If you cannot remember your PIN code 43 Using the V CHIP menu 991212142222222 222 2822 asoan 44 ENABLE BLOCKING ueueeie Wn 44 TV RATING Independent rating system for Droadcaster i wy Y YC 44 MPAA RATING Independent rating system for movies Lu uii testes GYG GU TYNNU os FY 45 BLOCKING OPTION uuu ccccceccscessseecenseeecenseeae 45 Unlocking programs temporarily 9 46 Locking channel dacevecdin edd WY ew dodid 46 Locking video inputs ccccscecsscee cents nnd mmn nm dnn Em 47 Using the game tim r 29 121 121 922 7 9 6nd nmn 8m mmm 48 Using the front panel lock feature uu1ueiesien Changing the PIN code weccsceecescscesesesssescseecesesesneees Adjusting the picture uu uei cena teeeesnseasseee cone Selecting the picture mode oo eeteeseeeseees Adjusting the picture quality Saving your ne
34. device Refer to the owner s manuals for your other devices to determine their available features if your TV s remote control does not operate a specific feature on a device use the remote control that came with the device MODE Caution Dispose of batteries in a designated disposal area Do not throw batteries into a fire Do not mix battery types or combine used batteries with new ones if the remote control does not operate correctly or if the operating range becomes reduced replace both batteries with new ones if the batteries are dead or if you will not use the remote control for a long time remove the batteries to prevent battery acid from leaking into the battery compartment Remote Control functional key chart Lights the remote key and toggles between enabled and disabled Illumination mode Sleep timer Power Power Power Power Power Power Power Power Digit I Digit 1 Digit Digit I Digit I AV input 1 Digit 1 Digit Digit 2 Digit 2 Digit 2 Digit 2 Digit 2 AV input 2 Digit 2 Digit 2 Digit 3 Digit 3 Digit 3 Digit 3 Digit 3 AV input 3 Digit 3 Digit 3 Digit 4 Digit 4 Digit 4 Digit 4 Digit 4 AV input 4 Digit 4 Digit 4 Digit 5 Digit 5 Digit 5 Digit 5 Digit 5 CD Digit 5 Digit 5 Digit 6 Digit 6 Digit 6 Digit
35. its useful life ask a qualified service technician to properly dispose of the TV Important notes about your Plasma TV The following symptoms are not signs of malfunction but technical limitation Therefore TACP THI TCL disclaims any responsibility for these symptoms 1 Plasma display radiates infrared rays lt may affect other infrared communication equipment under certain operating condition 2 Plasma display may cause interference in image sound etc of other electronic equipment that is easy to receive electromagnetic waves i e AM radios and video equipment under certain installed condition In particular it may affect electronic equipment beyond the residential unit where a plasma display TV is used 3 The Plasma display panel is manufactured using an extremely high level of precision technology however sometimes some parts of the screen may be missing picture elements or have luminous spots 4 You can enjoy a video game with this TV However the game which uses a ray gun etc and makes a screen a target has some which cannot be used on a principle 5 Like all phosphor based display devices and all gas plasma display plasma display can be susceptible to permanent ghost image phosphor burn in under certain circumstances Certain operating conditions such as the continuous display of a static image i e logos video games computer images teletext and displaying images in 4 3 mode over a prolonged period
36. menu listing will SAVE NEW PREFERENCE 3 Press lt or P to highlight change to DNR in VIDEO mode AUTO To turn off CableClear DNR Highlight OFF in step 3 above Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures cool medium and warm Mog cool blueish medium neutral warm reddish To select the color temperature 1 Press MENU and then press lt or until the PICTURE menu appears 2 Press A or W to highlight COLOR TEMPERATURE 3 Press or to highlight the mode you prefer G2 Gb amp o PICTURE ANTENNA MODE PREFERENCE OabieOlear cy AOD Resetting your picture guality adjustments The RESET function returns the picture quality adjustments to the following factory settings Contrast max 100 Color temperature cool Brightness center 50 DNR Color woe center 50 Mode atn center 0 Sharpness center 50 To reset your picture quality adjustments 1 Press MENU and then press or P until the PICTURE menu appears 2 Press A or Y to highlight RESET 3 Press or The menu displays DONE DOGOS PICTURE ANTENNA MODE SPORTS CONTRAST AUTO 2 o BRIGHTNESS COLOR Fal Selecting the video input source Press INPUT on the remote control or TV VIDEO on the TV to view a
37. of time accelerate phosphor burn in if proper precautions are not taken To minimize the occurrence of phosphor burn in adhere to the following guidelines and recommendations Display a moving image whenever possible Change the position of the menu display from time to time Always power down the display when you are finished using it 6 Even though you follow the above recommendations phosphor burn in can still occur since phosphors deteriorate as usage time accumulates To reduce and delay the phosphor burn in take the following measures Lower the Brightness and Contrast levels as much as possible without impairing image readability The LONG LIFE settings can reduce phosphor burn in page 60 Display an image with many colors and color gradations i e photographic or photo realistic images Create image content with minimal contrast between light and dark areas for example avoid white characters on black backgrounds Use complementary or pastel color whenever possible Avoid displaying images with few colors and distinct sharply defined borders between colors About ISM image Sticking Minimization function The ISM function The Image Sticking Minimization function automatically starts to decrease the brightness with small steps when fixed pattern displays for long time The pace of the decrease and the delay time depend on the brightness in the displayed screen Introduction
38. popular purchases however they are not always supported on the proper TV stands C Sometimes TVs are improperly secured or inappropriately situated on dressers bookcases shelves desks audio speakers chests or carts As a result TVs may fall over causing unnecessary injury a Toshiba Cares ae U The consumer electronics industry is committed to making home entertainment enjoyable and safe U The Consumer Electronics Association formed the Home Entertainment Support Safety Committee comprised of TV and consumer electronics furniture manufacturers to advocate children s safety and educate consumers and their families about television safety Tune Into Safety
39. record dub edit from one VCR to another VCR while watching a videotape You also can record one channel while watching another channel You will need two coaxial cables two sets of standard A V cables VCR1 From Antenna Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder You will need one set of standard A V cables Camcorder Video 3 front panel Note lf you have VCRs with S video use S video cables instead of standard video cables Do not connect both a standard video cable and an S video cable to VIDEO 1 or VIDEO 2 at the same time or the picture performance will be unacceptable Do not connect the same VCR to the output and input terminals on the TV at the same time To dub or edit VCR 2 must select Line IN and the TV must select VIDEO 1 The Video OUT terminals does not output the POP picture The Audio OUT terminals can output the sound of either the Main or POP picture see Selecting the Audio OUT sound on page 59 The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Note if you have a camcorder with S video use an S video cable instead of a standard video cable Do not connect both a stan
40. securely to the TV and DVI device if the cable is not fastended securely on both ends the TV may suffer from picture noise snow or have no picture at all To ensure that the DVI HDCP device is reset properly it is recommended that you follow these procedures a When turning on your electronic devices turn on the TV first and then the DW HDCP device b When turning off your electronic devices turn off the DVI HDCP device first and then the TV Connecting a device to the TheaterLink The TheaterLink allows you to remotely operate through the TV most infrared controlled devices such as a Toshiba infrared controlled VCR or DVD player enclosed within an entertainment center or similar cabinet Without the TheaterLink the device typically would need to be visible to operate it remotely You can use the TV s remote control programmed to operate the device see pages 19 25 or the device s remote control Point the remote control at the front of the TV and press the button for the desired function The signal passes from the remote control through the TV to the device via the TheaterLink cable included with your TV To connect align the TheaterLink cable s infrared eye with the device s infrared sensor and attach it using double sided mounting tape included with the cable in the accessory pack Plug the other end of the TheaterLink cable into the TV s TheaterLink OUT terminal You will need
41. 2 Laser Disc setup codes Brand DENON HITACHI KENWOOD MAGNAVOX MARANTZ MITSUBISHI NEC PANASONIC PHILIPS PIONEER PROSCAN QUASAR RCA SAMSUNG SANYO SHARP SONY TEAC TOSHIBA YAMAHA Code 5114 5100 5102 5103 5101 5114 5114 118 5119 5114 5104 5105 5106 5115 5111 5114 5114 5104 5105 5106 5115 5114 5112 5114 5117 5113 5116 5107 5108 5109 5110 5114 5114 5101 DVD setup codes Brand Code AIWA 3123 APEX 3120 DENON 3100 3117 FERGUSON 3101 HITACHI 3111 Wwe 3109 KENWOOD 3115 3129 KONKA 3119 MITSUBISHI 3105 NORDMENDE 310 ONKYO 3121 ORITRON 3124 PANASONIC 3100 PHILIPS 3103 3116 PIONEER 3102 RAITE 3113 RCA 3101 3106 SABA 3101 SAMPO 3114 SAMSUNG 3110 SHARP 3108 SILVANIA 3132 3118 SMC 3125 SONY 3104 3126 3127 3128 TECHNICS 3100 THOMSON 3101 TOSHIBA 3103 WAVE 3122 YAMAHA 3100 3130 ZENITH 3107 3112 VIALTA 3131 FUNAL 3132 3118 Satellite Receiver setup codes Brand DISH NETWORK Echostar ECHOSTAR EXPRESS VU G E G L GENERAL INSTRUMENT GRADIENTE HITACHI HNS Hughes MAGNAVOX PANASONIC PHILIPS PRIMESTAR PROSCAN RCA SONY STAR CHOICE TOSHIBA UNIDEN Cade 2105 2115 2116 2117 2105 2105 2115 2106 2108 2114 2103 2711 2242 2103 2101 2102 2104 2101 2102 2118 2108 2106 2109 2110 2113 2106 2109 2110 2113 2107 2103 2108 2100 2103 2119 2120 2121 2101 2102 26
42. 5 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Installation Care and Service Installation Follow these recommendations and precautions and heed all warnings when installing your TV 16 Never modify this equipment Changes or modifications may void a the warranty and b the user s authority to operate this equipment under the rules of the Federal Communications Commission INJURY DEATH OR EQUIPMENT DAMAGE Never place the TV on an unstable cart stand or table The TV may fall causing serious personal injury death or serious damage to the TV 17 DANGER RISK OF SERIOUS PERSONAL 18 Never place or store the TV in direct sunlight hot humid areas areas subject to excessive dust or vibration 19 Always place the TV on the floor or a sturdy level stable surface that can support the weight of the unit Use a sturdy tie between the TV s rear TV hook and the rear wall pillar etc to POP secure the TV Hook Wali Fi 20 Never place items such as vases aquariums or candles on top of the TV 21 Never biock or cover the slots or openings in the TV cabinet back bottom and sides Never place the TV on a bed sofa rug or similar surface too close to drapes curtains or walls or in a confined space such as a bookcase built in cabinet or any other pl
43. 716 9 2 Press AW lt gt to select one of the seven pictures becomes a NOTICE OF POSSIBLE ADVERSE moving picture The main picture is an always moving picture EFFECTS ON Plasma display 3 Press ENTER to display the channel you selected in step 2 as a Avoid displaying Stationary images on normal picture your Plasma display for extended periods Moving picture of time Fixed non moving mages such as still PIP POP windows or black gray bars n 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 41 Using the favorite channel search function You can use the favorite channel search function to guickly scan your favorite channels see Programming your favorite channels on page 32 1 Press FAVORITE The TV automatically enters POP mode and begins a seven picture scan of your favorite channels in the POP window FAVORITE ENTER Ava 2 Press AW lt P to select one of the seven pictures becomes a moving picture The main picture is an always moving picture 3 Press ENTER to display the channel you selected in step 2 as a normal picture Moving picture Note This feature does not operate in the DVI mode Every time you press FAVORITE the POP window scans your favorite chann
44. CH RTN button 3 Continue to change channels 4 Press CH RTN The memorized channel will be selected The TV will return to the memorized channel one time only Once you press CH RTN and then change channels again the CH RTN SurfLock memory will be cleared and the button will function as Channel Return by switching back and forth between the last two channels that were selected MENU Av lt gt Programming your favorite channels You can preset up to 7 of your favorite channels each for the FAVORITE CH1 and FAVORITE CH2 modes using the Favorite Channel Programming feature Because this feature scans through only your favorite channels it allows you to skip other channels you do not normally watch To program your favorite channels 1 Press MENU and then press or until the CUSTOM menu appears 2 Press A or W to highlight FAVORITE CH1 or FAVORITE CH2 Gee 6 amp 2 EA MO ON EO LABEL BACKGROUND 3 Press dor Pro display the FAVORITE CHI menu for example Note CH INPUT will be highlighted The FAV AY buttons operate as menu AP buttons when a menu display is Ei on screen The favorite channel feature is not available CUSTOM in ANT2 mode TENER O0noom Sheep Onoom Ui MWD FA HRN GOR FAVORITE CH2 Q o o CH LABELING gt o o GAREDD FO caem CLEAR ALL P channels 5 Press ENTER 6 Repeat steps 4 and
45. E encush Wr I TOSHIBA F FRANCAIS S ESPANOL Owner s MANUAL Plasma Color Television COLORSTREAN wiarear SRS padipor a SURROUND m 1 s s i f i i 1 i on t 1 1 F UU 1 Ak 5 i U Uu 1 a We a t ae 1 U i i U 4 LJ 1 el i 1 i Di ig l no na n al mya f f i myn od ue ae SE HR AU HAU UN iy jut sel dd u i pon AN a t w 7 ry an 7 EN Way Uf mn Sais ie r il oi sg il i u Gini y yu cf n El y i rd WY a j i A bM x tag 7 Un x kg ON Uc An AR a ioy ii i am i AU ail lyn iat fe Ai ale NADD Uw ch mye 4 it Amy y AN u fi a A MW MU m fy al wt ate i wi AI 1 snt I i ht 1 ih a hr Mal wi my PCC Coa n Ps i vee a i h MUN a Mi Hit als ws Hy ii UU ya Fydd y FYW WW ynan h way Wy A A hi AU i i i i ydh dye Ra uh ds nan Y MATT a iy Aw Mr LUN hydd b S i At fale S y etl uw yx ia F a a MYN TN f at ye MA ary y Wy we NI UUN 4 Ad hy vith fey her ak wh a WR nwl TL dry 4 aa Vatu vate a y EA d MANAW E e f AU vr hnn adu Hn AE Dead iey ln mata b YU CYN nA ii Ei On n ydd y UON dy ch Ah gdr y i i va iy an y y ye i we j ahg Wr A pa aM et Ny Nae yee an p E Y ddd Hy am y A pok K is wh igs hye wpa tiw sy iyi en aydd ay fm at ba a y y Wy Fe n i y A
46. ERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 Theater Wide 1 picture size e The picture is non uniformly enlarged the center of the picture remains close to its original proportion but the left and right edges are stretched wider to fill the screen A small part of the picture at the top and bottom is hidden however this mode cannot be scrolled Theater Wide 2 picture size e The entire picture is uniformly enlarged it is stretched the same amount both wider and taller retains its original proportion Part of the picture at the top and bottom is hidden To view the hidden areas see Scrolling the Theater Wide picture on page 37 Theater Wide 3 picture size e The picture is non uniformly enlarged it is stretched wider to fill the width of the screen but only slightly stretched taller A small part of the picture at the top and bottom is hidden To view the hidden areas see Scrolling the Theater Wide picture on page 37 Full picture size e The picture is non uniformly enlarged it is stretched wider to fill the width of the screen but not stretched taller None of the picture is hidden Theater Wide 1 picture size example Theater Wide 2 picture size example Theater Wide 3 picture size example O e C2 e Full picture size example Note To select the picture size press PIC SIZE on the remote control or sel
47. Highlight OFF in step 4 above 53 Setting the ON timer To set the ON timer to turn the TV on automatically 1 3 Press MENU and then press or until the CUSTOM menu appears Press A or V to highlight ON After the number position starts to blink press the Number buttons 0 9 to enter the length of time until the TV turns on automatically You can set the ON timer by 10 minutes up to 12h00m Press ENTER to start the timer amp 8 8 E9 amp i CUSTOM EO LABEL KGROUND VID BACI Press POWER to turn off the TV The TV will turn on automatically after the time you preset Setting the sleep timer To set the sleep timer to turn the TV off automatically 1 Press SLEEP to set the length of time until the TV turns off TEMER oncom Every time you press the button the time display will increase by 10 minutes up to 3 hours 0h00m 0h10m 0h20m 2h50m 3h00m 0h00m To cancel the sleep timer Press SLEEP until it is set to OhOOm The timer can also be set using the on screen menu 1 54 Press MENU and then press or P until the CUSTOM menu appears Press A or W to highlight SLEEP After the number position starts to blink press the Number buttons 0 9 to enter the length of time until the TV turns off automatically Press ENTER to start the timer E2 O g amp amp EP EB
48. L RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U S A SOME STATES OF THE U S A DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY LIMITATIONS ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THEREFORE THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES REV JUN02 65 Limited Canada Warranty for Wide Plasma Color TV Toshiba of Canada Limited TCL makes the following limited warranties to original consumers in Canada THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS PLASMA TV AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE PRODUCTS PURCHASED IN THE U S A AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES PRODUCTS PURCHASED IN CANADA AND USED IN THE U S A ARE NOT COVERED BY THESE WARRANTIES Limited One 1 Year Warranty on Parts and Labor TCL warrants this plasma TV and its parts against defects in materials or workmanship for a period of one 1 year after the date of original retail purchase DURING THIS PERIOD TCL WILL AT TCL S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOR TCL Authorized Service Depot personnel will come to your home when warranty service is required Depending on the type
49. N VIDEO LOCK GAME GAME Ti TIMER FRONT PANEL LOCK FRONT PANEL pou NEWPIN CO NEWPIN COD 5 Repeat steps 3 and 4 for other channels Channel Number LOCKS menu ee CH VENABLE BLOCKING ON ATING R UPAR a AT TNG SHO LOCK vv V ES LO OFF GAME _ TIMER OFF FRONT PANEL LOCK OFF NEW PIN CODE To ise sd item PressWorA To unlock channels 1 From the LOCKS menu select CH LOCK 2 Press or le to display the CH LOCK menu 3 Press AW 4 to highlight the channel you wanr to unlock and then press ENTER ema 1 LOCKS V CHIP j CHIP NABLEBLOCKING ON ENABLEBLOCKING ON TV RATING gt TV RATING MPAAR gt MPAABATING gt gt a BLOCK o ea 2 ta ve Wipes LOCK Te 4 ME TIMER 9 0 UG GAME TIMER Go o a FRONT PANEL LOCK O FHONT PANEL LOCK og 0 NEWPIN CODE ca gt NEWPIN CODE 4 Repeat step 3 for other channels you want to unlock To clear all locked channels at once Press amp or Y to highlight CLEAR ALL in step 3 above and then press i gt or lt CE 8 amp 8 amp Bb LOCKS V CH EP ENABLEBLOCK ING ON TV RATING GAME TIMER FRONT PANEL LOOK NEWPIN CODE Ly ap 5 MY ce Locking video inputs You can use the VIDEO LOCK feature to lock out the video input sources VIDEO 1 VIDEO 2 VIDEO 3 ColorStream HD1 ColorStream HD2 DVI
50. NG 3 Press or P to display the CH LABELING menu MENU CH INPUT will be highlighted ENTER mae ae custom steer RRB FAVORITE CHi pay Es Ha VIDEO LABEL BACKGROUND 4 Press the Channel Number buttons to select a channel you want to label 5 Press W to highlight LABEL 6 Repeatedly press lt or P to select a character for the first space and then press ENTER Repeat step 6 to enter the rest of the characters For a blank space in the label name choose an empty space from the list of characters otherwise a dash will appear in the space You must assign a character to all four spaces or the channel will not be labeled Repeat steps 4 7 for other channels You can assign labels to a maximum of 32 channels To erase a channel label 1 QD Press MENU and then press or P until the CUSTOM menu appears Press A or W to highlight CH LABELING Press or P to display the CH LABELING menu Press W to highlight CH INPUT then select the channel you want to clear with the Channel Number buttons Continued on next page 5 Press W to highlight CLEAR 6 Press dor P to erase the ks 300000 CUSTOM channel label ye ognagm Ci OFF 7 Repeat steps 4 6 to erase other channel labels FAVORITE CH1 AVOR H_ ENPUT 8 Viewing the wide screen picture formats You can view programs in a variety of picture sizes Natural Theater
51. NU and then press or P until the AUDIO menu appears 2 Press or W to highlight MTS 3 Press 4 or P to highlight STEREO TO You can leave your TV in STEREO mode because it will automatically output the type of sound being broadcast stereo or monaural The word STEREO or SAP displays in yellow in the menu when the TV receives the signal If the stereo sound is noisy select MONO to reduce the noise To listen to SAP if available 1 Press MENU and then press or P until the AUDIO menu appears 2 Press Aor W to highlight MTS 3 Press 4 or le to highlight SAP You will hear the station s second audio program if available from the speakers while viewing the original program s picture see note at right MENU Avd RECALL MUTE Note A second audio program SAP can be heard only on those TV stations that offer it For example a station might broadcast music as a second audio program f you have SAP On you will see the current program on the screen but hear music instead of the programs normal audio ff you have SAP on and the station you are watching is not currently broadcasting a second audio program the station s normal audio will be output However occasionally there is no sound at all in this instance if this happens set the MTS feature to STEREO mode 55 Enjoying the Dolby Virtual sound feature The Dolby Virt
52. TACP THI WILL AT TACP THI S OPTION REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR LABOR TACP THI Authorized Service Station personnel will come to your home when warranty service is reguired Depending on the type of repair required either the service will be performed in your home or the set will be taken to the TACP THI Authorized Service Station for repair and returned to your home at no cost to you Rental Units The warranty for rental units begins with the date of first rental or thirty 80 days from the date of shipment to the rental firm whichever comes first Commercial Units Plasma TVs sold and used for commercial purposes have a limited ninety 90 day warranty for all parts labor Owner s Manual and Product Registration Card Read this owner s manual thoroughly before operating this plasma TV Complete and mail the enclosed product registration card within ten days after you or the person who has given you this product as a gift purchased this plasma TV Returning the product registration card will enable TACP THI to provide you with better customer service and improved product support Failure to return the product registration card will not affect your rights under this warranty Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS 1 You must provide your bill of sale or other proof of purchase 2 All warranty servicing o
53. USER RCA REALISTIC REGAL REGENCY REMBRANT SAMSUNG S A SLMARK SPRUCER STARGATE TELECAPTION TELEVIEW TEXSCAN TOCOM TOSHIBA UNIKA UNIVERSAL VIDEOWAY VIEWSTAR ZENITH ZENITH DRAKE SATELLITE Code 1124 1132 1125 1105 1132 1122 1105 1112 1113 1124 1132 1125 1129 1134 1132 1105 1122 1143 1119 1124 1125 1126 1127 1120 1121 1122 1111 1123 1152 1140 1141 1142 1145 1118 1112 1103 1124 1103 1104 1105 1108 1133 1130 1132 1105 1139 1137 1102 1109 1110 1114 1151 1153 1128 1129 1130 1106 1107 1150 1131 1101 1116 1105 1132 1132 1115 1132 1112 1118 1140 1141 1142 1145 1149 1134 1137 1132 1105 1138 1105 1111 1112 1113 1105 1101 1105 1110 1132 1105 1148 1101 1105 1144 1135 1136 1147 1104 1146 1132 1125 1122 1132 1106 1129 1130 1117 1100 1100 Device code table HARMAN KARDON HITACHI JENSEN WC KENWOOD LXI MAGNAVOX MARANTZ MCINTOSH NAKAMICHI ONKYO OPTIMUS PANASONIC PHILIPS PIONEER QUASAR RCA SANSUI SANYO SCOTT SHARP SHERWOOD SONY SOUNDE SIGH TEAC TECHNICS VICTOR YAMAHA Brand ADMIRAL AYWA DENON FISHER GARRARD HARMAN KARDON JENSEN Ive KENWOOD MAGNAVOX MARANTZ MCINTOSH MITSUBISHI NAKAMICHI ONKYO OPTIMUS PANASONIC PHILIPS PIONEER CD Player setup codes Brand Code ADMIRAL 6126 AIWA 6133 6135 CARVER 6129 DENON 6142 6151 EMERSON
54. Y PARTS IN NO EVENT SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever The time within which action must be commenced to enforce any obligation of TCL arising under this warranty or under any law of Canada or of any province thereof is hereby limited to 90 days from the date you discover or should have discovered the defect This limitation does not apply to implied warranties arising under the law of any province of Canada THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM PROVINCE TO PROVINCE IN CANADA SOME PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY LIMITATIONS ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THEREFORE THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES REV JUN02 Index AB ANTMZ A GO WU A IU Ce F NT U 29 Antenna cables AUDIO OUT sound selecting 459ee 5 59 Audio system connection Auto aspect Auto power Off A N cables eeuueeueeen Back of the TV uu Gn I s E Cc Cable converter box connection Camcorder connection CH AW buttons woe Channel surf mode SpeedSurf CHEABEL uu go CH RTN butto
55. ace with poor ventilation The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV 22 Never allow anything to rest on or roll over the power cord and never place the TV where the power cord is subject to wear or abuse 23 Never overload wall outlets and extension cords 24 Always operate this eguipment with a 120V AC 50 60Hz power source only See page 7 CAUTION To reduce the risk of electric shock do not use the polarized plug with an extension cord receptacle or other outlet unless the blades can be inserted completely to prevent blade exposure continued on next page 25 Always make sure the antenna system is properly grounded to provide adeguate protection against voltage surges and built up static charges see Section 810 of the National Electric Code SA Antenna lead in wire Antenna discharge unit NEC Section 810 20 Ground clamp Grounding conductors Electric service equipment NEC Section 810 21 Power service grounding Ground olamps electrode system NEC Art 250 Part H INJURY OR DEATH Use extreme care to make sure you are never in a position where your body or any item you are in contact with such as a ladder or screwdriver can accidentally touch overhead power lines Never locate the antenna near overhead power lines or other electrical circuits Never attempt to insta
56. and then press lt or P until the AUDIO menu appears 2 Press A or W to highlight SBS 3 Press or P to highlight ON MENU Av lt gt To adjust the SBS level 4 Press A or W to highlight SBS LEVEL 5 Press or P to adjust the SBS level Note The SBS signal does not pass through the Sin ki Variable Audio OUT jacks see Connecting ss an audio system on page 18 AUDIO OUT MAEN STABLE SOUND OFF To turn off the SBS Highlight OFF in step 3 above Turning off the built in speakers Use this feature to turn the TV speakers off when you connect an audio system see Connecting an audio system on page 18 To turn off the built in speakers 1 Press MENU and then press lt l or P until AUDIO menu appears 2 Press A or W to highlight SPEAKERS 3 Press 4 or P to highlight OFF CITE To turn on the built in speakers Highlight ON in step 3 above 58 Selecting the Audio OUT sound This feature allows you to select the sound source MAIN or POP that is output from the AUDIO OUT terminals This is useful when amplifying or recording the POP sound with external equipment while hearing the sound of the main picture through the built in speakers See Connecting an audio system on page 18 To select the Audio OUT sound 1 Press MENU and then press 4 or P until the AUDIO menu appears 2 Press A or W to highlight AUDIO OUT 3 Press lt 4 or gt to select MAIN or POP
57. bol are registered trademarks of Dolby Laboratories Manufactured under license from Dolby Laboratories WOW and the C symbol are trademarks of SRS Labs inc WOW technology is incorporated under license from SRS Labs Inc Printed in Japan i o S H l BA 03 08 23566133
58. creen display of adjustment menus and messages To select a language 1 Press MENU and then press or P until the SET UP menu appears 2 Press amp or W to highlight LANGUAGE 50060 ADD ERASE ADD QUICK CONNECT GUIDE 3 Press 4 or P to highlight your desired language Selecting the antenna input You can connect to two different antenna input sources ANT 1 or ANT 2 To select the antenna input using the INPUT or TV VIDEO button Press INPUT on the remote control or TV VIDEO on the TV see illustrations below The current signal source displays in purple SOURCE SELECTION SOURCE SELECTION o 1 ANT t 4 VIDEO VIDEO t 2 VIDEO 2 VIDEO 2 3 VIDEO 3 VIDEO 3 4 CoiorStream HD1 CotorStream HD 5 ColorStream HD2 CotorStream HD2 6 DVi DVH 7 ANT 2 ANT 2 0 7 TO SELECT FVMIDEO TO SELECT Pressing INPUT on the remote control Pressing TVVIDEO on the TV displays the current signal source changes the current signal source press INPUT again or 0 7 to change To select the antenna input using the menu system 1 Press MENU and then press lt or W to highlight the SET UP menu 2 Press A or W to highlight ANT 1 2 OG ADD ERASE ADD GUICK CONNECT GUIDE 3 Press l or P to highlight either ANT 1 or ANT 2 depending on the antenna terminal you wish to use TV front panel VOLUME CHANNEL bY A MENU lt Pva MENU Av lt gt TV MIDEO
59. dard video cable and an S video cable at the same time or the picture performance will be unacceptable 16 Connecting a device to the DVI HDCP Your TV s DVI HDCP IN terminal is designed to accept HDCP program material in digital form from EIA CEA 861 compliant consumer electronic devices such as a set top box or DVD player equipped with a DVI D digital single link OUT terminal The DVI HDCP IN terminal is designed for best performance with 1080i high definition video signals bur also will accept and display 480p 720p and 480i picture signals Note This TV is not intended for connection to and should not be used with a PC personal computer You will need one DVI D digital single link cable You will need Note For proper operation the DVI D cable length should not exceed 3m 9 8 ft The recommended length is 2m 6 6 fi one pair of standard audio cables DVI HDCP device for example set top box or DVD player ee DVADOP OURS poco AUDIO vipeo Auma DVI HDCP Digital Visual Interface High bandwidth Digital Content Protection EIA CEA 861 compliance covers the transmission of uncompressed digital video with high bandwidth digital content protection which is being standardized for future reception of high detinition video signals Consult your consumer electronics dealer for availability Notes Make sure the DVI cable is fastened
60. ect PICTURE SIZE in the THEATER menu lf you select Theater Wide 2 or 3 the top and bottom edges of the picture may be hidden The see the hidden edges either scroll the picture see page 37 or try viewing the program in Full picture size Number PIC SIZE NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display Avoid displaying stationary images on your Plasma display for extended periods of time Ffxed non moving images such as still PIP POP windows or black gray bars in 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 Scrolling the Theater Wide picture Theater Wide 2 and 3 only 1 Press PIC SIZE to select either Theater Wide 2 or 3 mode 2 Press MENU and then press or l gt until the THEATER menu appears 3 Press A or W to highlight PICTURE SCROLL TOGOG wl THEATER Dolby Virtual wow 4 Press or le to display the Scroll Adjustment mode SCROLL ADJUSTMENT o AWY TO ADJUST 5 Press A or V to adjust the vertical position of the picture Normal center position SCHOLL ADJUSTMENT o LA S To raise the picture press A SCROLL ADAUSIMENT AV TO ADJUST o To lower the picture press V PIC SIZE MENU Ava Note You can scroll the picture in Theater Wide 2
61. eed two or three if satellite receiver is used coaxial cables one set of standard A V cables becween the TV and VCR plus one additional set of standard A V cables if satellite receiver is used one S video cable between the TV and DVD player sacellite receiver one pair of standard audio cables between the TV and DVD player satellite receiver Stereo VCR sO me N y f Mc G Ges From WW Antenna From Satellite Dish Note For the highest possible picture quality from a DVD player satellite receiver without component video or DVI HDCP use an S video cable between the TV and DVD player satellite receiver If your DVD player satellite receiver is compatible with component video see page 13 If your DVD player satellite receiver is compatible with DVI HDCP see page 16 Do not connect the DVD player satellite receiver and VCR to the same video channel on the TV See the illustrations which show the DVD player satellite receiver connected to VIDEO 1 on the TV and the VCR connected to VIDEO 2 on the TV The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Connecting a DVD player with ColorStream component video and a VCR This connection allows you to watch DVD VCR and TV
62. els in the following order NOTICE OF POSSIBLE ADVERSE FAVORITE CH1 FAVORITE CH2 Off EFFECTS ON Plasma display About the auto favorite feature Avoid displaying stationary images on your Plasma display for extended periods If your TV is in the program lock mode after 4 seconds the TV starts of time Fixed non moving images the auto favorite channel search function See page 46 for details such as still PIP POP windows or black gray bars in 4 3 screen picture or PIP gt S 4 3 UN POP formats can become permanently z a engrained in the Plasma display This BAS BEEN BLOCKED type of damage is NOT COVERED BY EXGE Ds Ser Limits A YOUR WARRANTY because it is the PUSH MUTE gt result of misuse See item 33 on page 4 case 9 Using the LOCKS menu The LOCKS menu includes the V Chip CH Lock Video Lock and New PIN Code functions You can use these functions after entering the correct PIN code Entering the PIN code 1 Press MENU and then press or P until the LOCKS menu appears GA on V OHIP ENABLE BLOCKING OFF rash oR OOK ING OPTION VIDEO LOCK OFF GAME TIMES OFF FRONT PANEL LOOK OFF NEW PIN CODE Yv 2 Press amp or Y to display the PIN code entering mode Blocking Reset status When the PIN code is already stored Set your 4 digit code by pressing Press the Number buttons 0 9 to enter the Number burtons
63. ended periods i RHS a 3 a GRE NWN WN NY AAA of time Fixed non moving images sa i n Sl such as still PIP POP windows or black sade 4 gray bars in 4 3 screen picture or PIP 4 3 Letter box Theater Wide 2 POP formats can become permanently Not Defined User set mode engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the Selecting the cinema mode result of misuse See item 33 on page 4 When you view a DVD movie 3 2 pulldown processed from a DVD player connected to the ColorStream component video or DVI HDCP inputs on the TV smoother and more natural motion can be obtained by setting the CINEMA MODE to FILM auto To set the CINEMA MODE to FILM auto 1 Press MENU and then press lt or until the THEATER menu appears 2 Press A or W to highlight CINEMA MODE 3 Press or P to select FILM auto 7 earen Dotby Virtuai OFF W SRS 3D N CU OFF FruBass OFF PICTURE SIZE AUTO ASPECT OFF P R RO y j To set the CINEMA MODE to VIDEO off Press dor P to select VIDEO in step 3 above Using the POP double window feature The POP picture out picture feature splits the screen into a double window that allows you to watch two programs at the same time The POP program can come from a TV broadcast or an external source such as a VCR To display a TV broadcast in the POP window 1 Press SPLIT to d splay the POP
64. f this plasma TV must be made by an Authorized TACP THI Service Station 3 The warranties from TACP and THI are effective only if the plasma TV is purchased and operated in the U S A or Puerto Rico 4 Labor service charges for set installation setup adjustment of customer controls and installation are not covered by these warranties 5 Warranties extend only to defects in materials or workmanship as limited above and do not extend to any plasma TV or parts that have been lost or discarded by you or to damage to plasma TV or parts caused by misuse accident Acts of God such as lightning or fluctuations in electric power improper installation improper maintenance or use in violation of instructions furnished by TACP THI or to units that have been modified or had the serial number removed altered defaced or rendered illegible How to Obtain Warranty Services lf after following all of the operating instructions in this manual and checking the Troubleshooting section you find that service is needed 1 To find the nearest TACP THI Authorized Service Station For plasma TVs purchased in the United States except Hawaii visit TACP s web site at www toshiba com taep or call toll free 1 800 631 3811 For plasma TVs purchased in Hawaii contact Toshiba Hawaii inc 327 Kamakee Street Honolulu Hi 96814 808 591 9281 2 Present your bill of sale or other proof of purchase to the Authorized Service S
65. fluctuations in electric power improper installation improper maintenance or use in violation of instructions furnished by TCL or to units that have been modified or had the serial number removed altered defaced or rendered illegible 5 ae 66 How to Obtain Warranty Services If after following all of the operating instructions in this manual and checking the Troubleshooting section you find that service is needed 1 To find the nearest TCL Authorized Service Depot visit TCL s web site www toshiba ca 2 Present your bill of sale or other proof of purchase to the Authorized Service Depot Authorized TCL Service Depot personnel will come to your home when warranty service is required Depending on the type of repair required either the service will be performed in your home or the set will be taken to the Authorized Service Depot for repair and returned to your home at no cost to you IN HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL OF CANADA INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS HEREBY LIMITED THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES GUARANTEES AGREEMENTS AND SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR REPLACEMENT OF AN
66. h the ADD ERASE feature The station may have broadcast difficulties Try another channel Antenna reception may be poor Use a highly directional outdoor antenna The station may have broadcast difficulties Try another channel Adjust the TINT and or COLOR in the PICTURE menu Make sure the MTS feature is set properly Check the FRONT PANEL LOCK feature Check whether the appropriate device mode is selected Remove all obstructions between the remote control and the remote control sensor in the TV e The remote control batteries may be dead Replace the batteries Check the VIDEO LOCK feature Limited United States Warranty for Wide Plasma Color TV Toshiba America Consumer Products Inc TACP and Toshiba Hawaii Inc THI make the following limited warranties to original consumers in the United States THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS PLASMA TV AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE PRODUCTS PURCHASED IN THE U S A AND USED IN CANADA ARE NOT COVERED BY THESE WARRANTIES PRODUCTS PURCHASED IN CANADA AND USED IN THE U S A ARE NOT COVERED BY THESE WARRANTIES Limited One 1 Year Warranty on Parts and Labor TACP THI warrant this plasma TV and its parts against defects in materials or workmanship for a period of one 1 year after the date of original retail purchase DURING THIS PERIOD
67. he channels the message Programming Now Please Wait appears 6 When channel programming is complete the message Completed appears 7 Press Channel A or W to view the programmed channels Adding and erasing channels manually After you have automatically programmed the active channels into the TV s channel memory you can manually add or erase specific channels To add or erase channels 1 Select the channel you want to add or erase If you are adding a channel you must select the channel using the Channel Number buttons 2 Press MENU and then press 4 or P until the SET UP menu appcars 3 Press A or W to highlight ADD ERASE aea gt z Al ENGLISH ANT oror 4 Press or W to select ADD or ERASE depending on the function you want to perform 5 Repeat steps 1 4 for other channels you want to add or erase Changing channels To change to the next programmed channel Press Channel A or W on the TV or remote control To change to a specific channel programmed or unprogrammed Press the Channel Number buctons 0 9 and 100 For channels 100 and higher press the 100 button and then the next two numbers For example to select channel 125 press 100 2 5 Changing channels using SpeedSurf To change to a specific programmed channel using SpeedSurf Press and hold Channel A or W for about one second The TV will enter the SpeedSurf mode Upper channels
68. increase the contrast the picture mode Sports Bright and dynamic picture factory setting automatically changes to PREFERENCE in Standard Standard picture Setting factory setting the Picture menu Movie Movie like picture setting factory setting To save your new picture quality settings you Preference Your personal preferences inust select SAVE NEW PREFERENCE see page 50 before closing the Picture menu or see Saving your new preferences on page 50 the TV will return to the previous picture To select the picture mode mode 1 Press MENU and then press l or gt until the PICTURE menu appears 2 Press W or A to select MODE 3 Press 4 or Pe to highlight the mode you prefer TV front panel Mo RHANNEL O PA See T B PICTURE ANTENNA Pace i MENU AYA CHI HMO FEE EN O j BRIGHTNESS 59 COLON 50 TENT o SHARPNESS 50 gt SAVE NEW PREFERENCE bd Adjusting the picture guality You can adjust the picture guality to your personal preferences including the contrast brightness color tint sharpness contrast fower higher brightness darker lighter color paler deeper tint reddish greenish MENU sharpness softer sharper To adjust the picture quality 1 Press MENU and then press or le until the PICTURE menu appears Av lt gt 2 Press W or A until the item you want to adjust is highlighted 3 Press or le to adjust the level
69. indicator will blink three times The remote control will begin to cycle through the available codes again If no key is pressed within 10 seconds while programming the remote control will exit the program mode and return to the previous code 22 Using the volume lock feature 8000 For the TV CABLE SAT VCR and DVD modes the volume controls VOL AW and MUTE can be programmed locked to the selected device mode This feature does not apply to the AUDIOU2 modes For example to lock the volume controls to always jump to the CABLE SAT mode 1 Repeatedly press MODE to select the CABLE SAT mode 2 While holding down the RECALL button press 8 0 0 0 3 Press VOL A The Mode indicator will blink two times locked The following table describes in more detail the Volume Lock implementation Number MODE VOL AY RECALL CBL SAT VCR DVD AUD1 AUD2 TV TV TV AUD1 AUD2 CBL SAT CBL SAT CBL SAT AUD AUD2 VCR VCR VCR AUD1 AUD2 DVD DVD DVD AUDI AUD2 AUDI AUDI AUDI AUDI AUDI AUD2 AUD2 AUD2 AUD2 AUD2 To reset the volume controls to the original device code 1 While holding down the RECALL button press 8 0 0 0 2 Press VOL V The Mode indicator will blink four times unlocked Operational feature reset 8900 This feature clears all setup features not related to Device code set up and resets the Volume Lock to TV
70. ll ages BLOCKING OPTION 1 From the LOCKS menu select BLOCKING OPTION 2 Press or P to display the BLOCKING OPTION menu and then press or W to select an item as follows MPAA UNRATED Press lt or P to select ON lock or OFF unlock for unrated programs in the MPAA rating system ED amp 9 EB E8 8 80 G8 E7 EB G8 Avd LOOKS Locks V CHIP BLOCK ING OPT ON ENABLE BLOOKING ON E MPRA UNHA TE one DARAAN ua viH NGONO VOFF BLOG NG Onn oe i SH LOCK VIDEO LOCK OFF AME T MER OFF FRONT PANEL LOCK OFF NEW PEN CODE TV NONE RATING Press 4 or gt to select ON lock or OFF unlock for programs Caution rated NONE in the TV PARENTAL GUIDELINES Setting the TV NONE RATING to ON may block the broadcast of emergency O By information The menu will display the note amp Enabling this option may block emergency UD Locks messages to warn you of this possibility BLOCK ING OPTION UNRATED NE RATING oe CYFF VCHI P MENU i O O BLIN SHES EMERGENCY MESSAGES Press or P to return to the LOCKS menu 46 Unlocking programs temporarily 1 If you try to watch a TV program that exceeds the rating limits you set the TV enters program lock mode After 4 seconds the TV starts the favorite channel search function see page 42 You can either unlock the program temporarily see steps 2 and 3 or select a non locked program to watch
71. ll any of the following during lightning activity a an antenna system or b cables wires or any home theater component connected to an antenna or phone system 26 DANGER RISK OF SERIOUS PERSONAL Care For better performance and safer operation of your TOSHIBA TV follow these recommendations and precautions 27 if you use the TV in the room of 0 C or less the picture brightness may vary until the plasma monitor warms up This is not a sign of a malfunction 28 Always unplug the TV before cleaning Wipe the display panel surface gently using only the supplied wiping cloth or a soft cloth cotton flannel etc A hard cloth may damage the surface of the panel Avoid contact with alcohol thinner benzene acidic or and alkaline solvent cleaners abrasive cleaners or chemical cloths as the surface may be impaired Never spill liquids or push objects of any kind 29 WARNING RISK OF ELECTRIC SHOCK vi Ninto the TV cabinet slots 30 While it is thundering do not touch the connecting cables or apparatus 31 For added protection of your TV from lightning and power surges always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time 32 During normal use the TV may make occasional snapping or popping sounds This is normal especially when the unit is being turned on or off If these sounds become frequent or con
72. n Channel Number butt0nS e ueeeuinnuueeen Channel programming ADD ERASE miosan ain Dyna Automatic programming TWCABLE selection CH SCAN button Ja Cinema mode s sr sososieossrrsssrsesoseseessrossserernortisossreasirnnrosres Closed caption ssnin Color temperature Component video cables D Demonstration mode weccecsesccsessessssssessesssssessesstesessteesees 62 Dobly Virtual sound oe Double window POP feature DNR Digital Noise Reduction DTV receiver connection sssr DVD CONNECTION woo eeeccsesssesstsseseesseseesssstsssesetsstesseons DVI HDCP connection oes seesseetseessesssstsseessesesseeeseees FGI FAV WA buttons uuu een FAVORITE button Favorite channels uuueueueuneusununiiiiiuiiuiiiiiuILuvu6 Favorite channel search Front panel JOCK ecsssssssseessseeessossesssaneessneessnnenssaneeeanes Game timer INPUT button LM Labeling channels ccsssssssssesesscssnsneescnsneenecsnnnennens Labeling video inputs Language Selection ieee Last mode memory 29999eniuueeeuneee Locking channels e ou 29 eee Locking video Inputs eeceecee LOCK MENU sirain LONG life features e e Menu system o2eeneeieeiuuneeh MTS feature 9 eiieiieueniueesiuen MUTE buttonau in eu Gy en cactus y ed OPQ CONFI aui uo Tu RGC Lu GL ny dadan
73. narration and sound effects of TV programs and videos that are closed captioned usually marked as CC in TV listings o Text An on screen display of information not related to the current program such as weather or stock data when provided by individual stations To view captions or text 1 Tune the TV to the desired program 2 Press MENU and then press 4 or P until the CUSTOM menu appears 3 Press V or A to highlight CC mes CUSTOM TIMER pE ch FOAI eb edie Avon ey FAVORITE CH2 LABEL ING j sy oH VIDEO LABEL BACKGROUND gt gt Ava 4 Press 4 or P to highlight the desired closed caption mode as follows To view captions highlight C1 C2 C3 or C4 C1 displays translation of the primary language in your area Note f th d elected is not closed captioned a ote ifi amp program or video you selected is not closed captioned no A closed caption signal may not display in the captions will display on screen following situations when a videotape has been dubbed when the signal reception is weak when the signal reception is nonstandard To view text highlight T1 T2 T3 or T4 Note If text is not available in your area a black rectangle may appear on screen If this happens turn off the Closed Caption feature PE WORLD WEATHER Current Weather LONDON 5 Clear 57 Cfoudy Clear Cloudy Rain To turn off the Closed Caption feature
74. nd No sound picture OK Poor picture sound OK Poor reception of broadcast channels Cannot receive above channel 13 Black box appears on the screen Unable to select a certain channel Multiple images Poor color or no color No stereo or SAP sound from a known MTS broadcast The front panel buttons do not operate The remote control does not operate Cannot access signal input sources Videol Video2 Video3 ColorStream HD1 HD2 DVI HDCP and or Channels 3 and 4 Make sure the power cord is plugged in then press POWER The remote control batteries may be dead Replace the batteries Check the antenna cable connections e The sound may be muted Press VOLUME The station may have broadcast difficulties Try another channel Check that the SPEAKERS function in AUDIO menu is set properly e Check the antenna connections e The station may have broadcast difficulties Try another channel e Adjust the PICTURE menu e The station may have broadcast difficulties Try another channel Check the antenna connections e If you are using a VCR make sure the TV VCR button is set correctly Make sure the TV CABLE switch is set to the mode that corresponds with the signal source type cable company or outside antenna The closed caption feature may be set to one of the Text modes T1 T2 T3 or T4 Turn closed captioning OFF The channel may be locked out with the CH LOCK feature or erased wit
75. nnector see page 16 TheaterLink cable is used to remotely control other AV equipment equipped with an infrared sensor throught the TV see page 17 NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV amp For GOOD picture quality Use a standard stereo A V yellow video cable For BETTER picture quality If your equipment has an S video connector use an S video cable instead of a standard yellow video cable You still must connect the standard red and white audio cables for full system connection but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable For BEST picture quality If your equipment has component video connectors use component video cables instead of a standard yellow video cable or an S video cable plus the standard red and white audio cables for full system connection If your equipment has a DVI D digital single link connector use a DVI D cable plus standard red and white audio cables connected to the audio terminals labeled For DVI HDCP IN for full system connection E Coaxial antenna cable z gt Standard stereo AV cables typically color coded yellow for video red and white for audio 5 p S video cable ooo ooo Component video cables typically color coded red green blue eseese Bn JO TheaterLink cable
76. not access POP features when viewing DVI input You cannot display the ANT 2 Signal source in the POP window You can choose to hear the sound of either the main or POP program see Selecting the Audio OUT sound on page 59 EXIT SPLIT POP DIRECT CH SOURCE POP CH AV NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display Avoid displaying stationary images on your Plasma display for extended periods of time Fixed non moving images such as still PIP POP windows or black gray bars in 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 40 Switching the main and POP pictures Press SWAP while you are using the POP feature to switch the main and POP pictures d Freezing the POP picture 1 Press FREEZE while the POP is not on the screen The POP window will appear with a still picture 2 Press FREEZE again to renew the still picture Za Z_ R To erase the still POP window Still picture Press EXIT FREEZE SWAP Adjusting the size of the double window When the input signals of the main and POP pictu
77. ode of a device 8500 22 Using the volume lock feature 8000 23 Operational feature reset 8900 u u 23 Device code rable Learning abour the remote control 26 Setting up your TV ssesseeeeeeeeeeeneeees 27 Learning about the menu system o cscecssessteseesseseeees 27 Using the Quick Connect Guide 28 Changing the on screen display language 0 29 Selecting the antenna input 94149 149222222 2778 78mm nm 29 Adding channels to the TV s memory 912199595595 30 Programming channels automatically 30 Adding and erasing channels manually 31 Changing channels cscccccsssescesssesscseessssessssesneesssseeres 31 Changing channels using SpeedSurf 31 Using the TV s features 32 Adjusting the channel settings 0 cesses 32 Switching between two channels using Channel Ren Y WY 32 Switching between two channels using SurfLock 32 Programming your favorite channels Labeling channels u 19ue 1u een ene Viewing the wide screen picture formats 0 35 Selecting the picture size ss ssssssssssrressssnsrsssrentesnrranse 35 Scrolling the Theater Wide picture Theater Wide 2 and 3 only a 37 Using the auto aspect feature 38 Selecting the cinema mode n 38
78. of repair required either the service will be performed in your home or the set will be taken to the TCL Authorized Service Depot for repair and returned to your home at no cast to you IN HOME SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT Rental Units The warranty for rental units begins with the date of first rental or thirty 30 days from the date of shipment to the rental firm whichever comes first Commercial Units Plasma TVs sald and used for commercial purposes have a limited ninety 90 day warranty for all parts labor Owner s Manual Read this owner s manual thoroughly before operating this plasma TV Your Responsibility THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS 1 You must provide your bill of sale or other proof of purchase 2 All warranty servicing of this plasma TV must be made by an Authorized TCL Service Depot 3 The warranties from TCL are effective only if the plasma TV is purchased in Canada from an authorized TCL dealer and operated in Canada 4 Labor service charges for set installation setup adjustment of customer controls and installation are not covered by these warranties Warranties extend only to defects in materials or workmanship as limited above and do not extend to any plasma TV or parts that have been lost or discarded by you or to damage to plasma TV or parts caused by misuse accident Acts of God such as lightning or
79. opriate for all children Note The V Chip function is available only for the U S V Chip system The Canadian V Chip system is not supported LOCKS menu DAGO LOCKS TV RATING MPAA RATING BLOCKING OPTION b VIDEO Tock OFF GAME TIMER OFF FRONT PANEL LOCK OFF NEW PIN CODE VSQHIP oag E BRABLE BLOCKING N x To select each item PressWorA Ava RECALL Press RECALL to display the rating of the TV program you are currently watching STEREO SAP ANT 1 CABLE 4 MPAA RATING Independent rating system for movies 1 From the LOCKS menu select MPAA RATING LOCKS menu 2 Press q or to display the MPAA RATING menu and then press Y or A to highlight MPAA RATING V cHIP ENASLE BLOCKING ON GB G OPTION a FIDES Lock ore GAME TIMER OFF FRONT PANEL Lock GPe NEW PIN CODE To select each item Press Wor A 3 Press to lock X or press to unlock The movie ratings you can lock are described as follows xX X rated For adults anly NC17 Not intended for anyone 17 and under R Restricted Under 17 reguires accompanying parent or adult guardian PG13 Parents Strongly Cautioned Some material may be inappropriate for children under 13 PG Parental Guidance Suggested Some material may not be su table for children G General Audience Appropriate for a
80. ote control for use Your Toshiba TV remote control has one dedicated TV mode and five universal modes VCR Cable SAT DVD Audiol and Audio2 The target devices and default devices being programmed for each mode are as follows Target device Mode mapping Toshiba TV CABLE SAT Universal Cable Satellite Default device codes VCR Universal VCR DVD LD Cassette DVD Universal DVD VCR LD Cassette AUDIO1 Universal Audio Amp Tuner Misc Audio CD MD AUDIO2 Universal Audio CD MD Amp Tuner Misc Audio TV Toshiba TV CABLE SAT Toshiba Satellite receiver VCR Toshiba VCR DVD Toshiba DVD AUDIOI _ Pioneer Audio receiver AUDIO2 Pioneer LD Repeatedly press MODE to cycle among the modes If you own different brands of audio video devices you must first program your remote control see Programming the remote control for use with your audio video devices on page 22 installing the remote control batteries To install the batteries 1 Slide the battery cover off the back of the remote control 2 Install two AA size alkaline batteries Match the and signs on the batteries to the signs on the battery compartment 3 Slide the batrery cover back on to the remote control until the lock snaps Note Your TV s remote control may not operate certain features on your VCR cable TV converter or other electronic
81. p 2 above Using the front panel lock feature a TV front panel Lock the front panel buttons to prevent the buttons from being pressed accidentally by children for example When the front panel 2 lock is in ON all control buttons on the TV front panel except Buttons to be locked POWER do not operate To lock the front panel 1 From the LOCKS menu select FRONT PANEL LOCK 2 Press lt or P to highlight ON oee DOKS Number If a button on the front panel is pressed the message Not Available appears To unlock the front panel Highlight OFF in step 2 above or press and hold the VOL 4 button on the TV for about 10 seconds until the message Front Ba i a Mn ae Panel Lock Off appears on the screen FRERE WIR Changing the PIN code 1 From the LOCKS menu select NEW PIN CODE 2 Press the Number buttons 0 9 to enter a 4 digit code The numbers you enter will replace the dashes in the display QAG F LOOKS V CHI P ENABLE BLOCKING ON TV RATING MPAA RATING BLO KING OPTION wvvvv E TIMER 3 Press ENTER 48 The new PIN code is now active Adjusting the picture Selecting the picture mode Note You can select from four picture modes Sports Standard Movie and ff you select one of the factory set picture Preference modes SPORTS STANDARDS or MOVIE UU and then change a picture quality setting ee cture Quality e g
82. pears 2 Press A or W to highlight PICTURE SHIFT DACOS A LONG Ll GRE GE CENA OFF OB LG ROBE SHURE Lo WHITE gt GRAY LEVEL 2 Press dor P to select ON To deactivate the picture shift Select OFF in step 3 above Reverse The picture is displayed alternately between positive image and TV front panel negative image to reduce the phosphor burn in of the screen This function is effective for the pattern image To activate the reverse 1 Press MENU and then press lt or P until the SET UP menu appears 2 Press A or W to highlight REVERSE MENU 3 Press lt 4 or P to reverse between the positive image and negative image After the result of the phosphor burn in you may mitigate the image retention if you keep on the Reverse for the same period of time the phosphor burn in generated Avd gt To return to the normal picture Press any button White white pattern is displayed on the whole screen To display the wh te pattern 1 Press MENU and then press lt or until the SET UP menu appears 2 Press A or W to highlight WHITE 000500 SET UP a LONG LIFE Stone SHIFT ERSE aen 3 Press l or Pe to display the white pattern After the result of the phosphor burn in the image retention may be mitigated if you keep on the White pattern for a given length of time To return to the normal picture Press any button Gray le
83. press EXIT or turn off the TV See page 28 for details Remote control CT 90164 Owners Manual Batteries for the remote control LRG AA x 2 Power cord TheaterLink cable three wire grounding type Noise filter Soft cloth for cleaning the screen The power cord supplied with this product is to be used in United States and Canada only If this product is used in another country use a power cord which confirms to the law or regulations of that country Do not remove the noise filter from the power cord The noise filter is to reduce the interference in image or sound of other electronic equipment Exploring your new TV You can operate your TV using the buttons on the front panel or the Remote control remote control The A V terminals for connecting other eguipment to your TV are on the back panel and inside the storage compartment see illustrations below Also see Connecting your TV on pages 9 18 TheaterLink Power indicator TV front IR pass through Remote sensor
84. programs and record TV programs You can record one channel while watching another channel Your TV has ColorStream component video inputs Connecting your TV to a DVD player with component video such as a Toshiba DVD player with ColorStream can greatly enhance picture guality and realism You will need two coaxial cables one set of standard A V cables one set of component video cables one pair of standard audio cables From Antenna Stereo VCR Note For the highest possible picture quality use component video cables or a DVI D digital single link cable between the TV and DVD player You can connect component video cables from the DVD player to either set of ColorStream terminals on the TV HD 1 or HD 2 The ColorStream HD 1 and HD 2 terminals can be used with Progressive 480p 720p and Interlaced 480i 1080i scan systems If your DVD player is not compatible with component video or DVI HDCP use an S video cable plus an audio connection instead The unauthorized recording use distribution or revision of television programs videotapes DVDs and other materials is prohibited under the Copyright Laws of the United States and other countries and may subject you to civil and criminal liability Connecting a DTV receiver set top box with ColorStream component video and a VCR This connection allows you to watch DTV digital TV broadcast VCR and TV programs and record
85. res are 480i you Note can adjust the size of each window Continuously pressing or gt if the signal format other than 480i is changes the size in 9 steps received this feature is not available Not available will appear on the screen NOTICE OF POSSIBLE ADVERSE EFFECTS ON Plasma display Avoid displaying stationary images on your Plasma display for extended periods of time Fixed non moving images such as still PIP POP windows or black gray bars in 4 3 screen picture or PIP POP formats can become permanently engrained in the Plasma display This type of damage is NOT COVERED BY YOUR WARRANTY because it is the result of misuse See item 33 on page 4 Double Window with keeping aspect ratio The Double Window displays the pictures with various aspect ratio Note according to the input signal format The auto aspect feature does not operate in the Double Window mode 480p 720p 1080i 480i 480i 480p 720p 1080i 480p 720p 1080i 480p 720p 1 080i CH SCAN Using the programmed channel search function You can use the programmed channel search function to quickly scan your programmed channels see Adding channels to TV s memory on page 30 1 Press CH SCAN The TV automatically enters POP mode and begins a seven picture scan of your programmed channels in the POP window Note i i The aspect ratio of all main and POP windows are
86. signal coming from another device connected to your TV such as a VCR or video disc player see illustrations below You can select ANT 1 VIDEO 1 VIDEO 2 VIDEO 3 ColorStream HDI ColorStream HD2 DVI or ANT 2 depending on which input terminals are used to connect your devices see Connecting your TV on pages 9 18 SOURCE SELECTION SOURCE SELECTION O ANT 1 ANT 1 VIDEO 1 VIDEO t 2 VIDEO 2 VIDEO 2 3 VIDEO 3 VIDEO 3 4 GoiorStream HD4 CotorStream HDT S ColorStream HD2 CotorStream HD2 6 DVi DVE TANT 2 ANT 2 0 7 TO SELECT TWAIDEO TO SELECT Pressing INPUT on the remote contro displays the current signal source press INPUT again or 0 7 to change Pressing TVVIDEO on the TV changes the current signal source Avde Note When ColorStream HD 1 HD2 or DVI is selected the VIDEO OUT Jack does not output a signal To receive a VIDEO OUT signal use a standard video or S video IN connection instead if you select ColorStream HD VHD2 DV while the POP picture is active the POP window will close TV front panel 52 Labeling the video input sources The video label feature allows you to label each input source for your TV from the following preset list of labels Uses the default label name VCR _ Video cassette recorder DVD DVD video DTV Digital TV set top box SAT Satellite box CBL Cable box HD DVI HDCP device see page 16
87. such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety T E gt f If the provided plug does not fit into o 1 your outlet consult an electrician for replacement of the obsolete outlet Ca a HA 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus RA oe k 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to gualified service personnel Servicing is reguired when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 1
88. tation Authorized TACP THI Service Station personnel will come to your home when warranty service is required Depending on the type of repair required either the service will be performed in your home or the set will be taken to the Authorized Service Station for repair and returned to your ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U S A INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U S A AS HEREBY LIMITED THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES GUARANTEES AGREEMENTS AND SIMILAR OBLIGATIONS OF TACP OR THI WITH RESPECT TO THE REPAIR GR REPLACEMENT OF ANY PARTS IN NO EVENT SHALL TACP OR THI BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES No person agent distributor dealer or company is authorized to change modify or extend the terms of these warranties in any manner whatsoever The time within which action must be commenced to enforce any obligation of TACP or THI arising under this warranty or under any law of the United States or of any state thereof is hereby limited to 96 days from the date you discover or should have discovered the defect This limitation does not apply to implied warranties arising under the law of any state of the U S A THIS WARRANTY GIVES YOU SPECIFIC LEGA
89. tinuous unplug the power cord and contact a Toshiba Authorized Service Center 33 Possible Adverse Effects on Plasma Screen If a fixed non moving pattern remains on the plasma screen for long periods of time the image can become permanently engrained in the plasma TV panel and cause subtle but permanent ghost images This type of damage is NOT COVERED BY YOUR WARRANTY Never leave your TV on for long periods of time while it is displaying the following formats or images Fixed images such as PIP POP windows stock tickers video game patterns TV station logos and websites Special Formats that do not use the entire screen For example i viewing letterbox style 16 9 media TOSHIBA on a normal 4 3 display gray bars at top and bottom of screen or viewing normal style 4 3 media on a widescreen 16 9 display gray bars on left and right sides of screen Service 34 WARNING RISK OF ELECTRIC SHOCK AN see attempt to service the TV yourself Opening and removing the covers may expose you to dangerous voltage or other hazards Refer all servicing to a Toshiba Authorized Service Center 35 if you have the TV serviced Ask the service technician to use only replacement parts specified by the manufacturer Upon completion of service ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition 36 When the TV reaches the end of
90. ual sound feature allows you to enjoy virtual Note surround sound from the TV s speakers The Dolby Virtual and SRS 3D features If you connect a device a game console a DVD player ora DTV cannot be on at the same time receiver etc with analog audio output to standard analog audio terminals on the TV and the input source is encoded with Dolby Surround DOP sound or Dolby Digital DOP sound the Dolby Virtual feature functions as Virtual Dolby Surround tie VDS VDS simulates Dolby Surround sound from the SURROUND TV s speakers To turn on the Dolby Virtual sound feature 1 Press MENU and then press lt or P until the THEATER menu appears 2 Press A or W to highlight Dolby Virtual 3 Press or to highlight ON MENU Ava To turn off the Dobly Virtual sound feature Highlight OFF in step 3 above Enjoying the WOW surround sound feature The WOW surround sound features SRS 3D FOCUS and TruBass expand the audio listening field wider and deeper to create exceptional sound guality from the TV s speakers The WOW features use stereo signals from a TV broadcast or video input SRS 3D Surround sound effect Note FOCUS Vocal emphasis effect if the broadcast is monaural the WOW SRS TruBass Bass expansion level HIGHT LOW or OFF De A ON To adjust the WOW feature 1 Select STEREO mode See Selecting stereo SAP broadcasts on page 55 2 Press MENU and then press
91. und ALLU ILL LL Sub bass system SBS SurfLock Lo I I E A un DAL T TheaterLink connection sss se srresrsersarrerrnsrseninrrsrrrsennninn 17 Troubleshooting 5 TruBass feature TV VIDEO button vV V CHiP BLOCKING OPTION ENABLE BLOCKING MPAA RATING NEW PIN CODE TV RATING oa GG oU ya de Unlocking programs temporarily 46 VCR connection VIDEO LABEL VIDEO LOCK WwW Warranty 99 5 WOW feature TOSHIBA AMERICA CONSUMER PRODUCTS INC HEAD OFFICE 82 TOTOWA ROAD WAYNE NEW JERSEY 07470 NATIONAL SERVICE DIVISION 1420B TOSHIBA DRIVE LEBANON TN 37087 TOSHIBA HAWAII INC HEAD OFFICE 327 KAMAKEE STREET HONOLULU HAWAI 96814 U S A TEL 808 591 9281 TOSHIBA OF CANADA LTD HEAD OFFICE 191 McNABB STREET MARKHAM ONTARIO L3R 8H2 CANADA TEL 905 470 5400 SERVICE CENTERS TORONTO 191 McNABB STREET MARKHAM ONTARIO L3R 8H2 CANADA TEL 905 470 5400 MONTREAL 1643 NORTH SERVICE RD TRANS CANADA HIGHWAY DORVAL QUEBEC H9P 131 CANADA TEL 514 856 4100 VANCOUVER 22171 FRASERWOOD WAY RICHMOND B C V6W 1J5 CANADA TEL 604 303 2500 MANUFACTURED BY TOSHIBA VISUAL EOUIPMENT CORPORATION ColorStream and StableSound are registered trademarks of Toshiba Amer ca Consumer Products Inc SurfLock is trademark of Toshiba America Consumer Products Inc Dolby and the double D sym
92. urns on the TV automatically when the power is resupplied If the power is going to be off for a long time and you are going to be away from your TV unplug the power cord to prevent the TV from turning on in your absence A A EXIT RECALL GE RIP AS AU H ss _ if SB RRQ GNPUT Eb cn a am og Appendix Specifications Design and specifications are subject to change without notice e Never service or remodel the TV set by yourself It may expose you to a fire hazard or dangerous voltage Television System NTSC standard Channel Coverage VHF 2 through 13 UHF 14 through 69 Cable TV Mid band A 8 through A 1 A through I Super band J through W Hyper band AA through ZZ AAA BBB Ultra band 65 through 94 100 through 125 Power Source 110 240 V AC 50 60 Hz See page 7 Power Consumption 301 W average Audio Dower 10W 10W Speaker Type Main Four 2 1 4 x 5 1 8 inches 70 x 130 mm Tweeter Two 1 1 4 inches 32 mm round Video Audio Terminals S VIDEO INPUT Y 1 V p p 75 ohm negative sync C 0 286 V p p burst signal 75 ohm VIDEO AUDIO INPUT VIDEO 1 V p p 75 ohm negative sync AUDIO 150 mV rms 30 modulation equivalent 47k ohm ColorStream component video INPUT Y 1V p p 75 ohm PR 0 7 Vip p 75 ohm Ps 0 7 Vp p 75 ohm AUDIO 150 mV rms 47k ohm VIDEO AUDIO OUTPUT VIDEO 1 V p p 75 ohm negative sync AUDIO 150 mV rms 30 modulation equivalent
93. us em DVD wen oo channel channel channel return ee ce Slow FWD SowF D oo oo oo oo Slow REV _ Skip FWD Skip FWD ee Skip REV Skip REV VCR VCR VCR gt Rewind Rewind Rewind Rewind VCR VCR VCR Pause Pause noe Pause Pause VCR VCR gt VCR Play Play Play Play VCR VCR VCR Fast FWD Fass FWD Fast FWD Fast FWD CD MD Cassette TV SAT TVIVCR Reverse 5 Diseshift AM FM Discshift Deck side A B switch VCR VCR gt Stop Stop Stop Stop VCR VCR Record ane Record Record lt TV lt TV lt TV lt TV lt TV lt TV TV up down POP Split TV TV lt TV TV TY TV lt TV POP Direct ch lt TV TV lt TV lt TV TV lt TV TV POP Freeze lt TV TV lt TV TV lt TV lt TV lt TV POP Swap lt TV TV lt TV TV lt TV lt TV lt TV POP Ch scan TV TV lt TV TV TV TV TV POP Source TV lt TV lt TV lt TV lt TV lt TV TV will send nothing lt TV will jump to TV gt VCR will jump to last active VCR or DVD seconds or if a key is pressed in that mode The VOLUME and MUTE will jump to The AUDIO1 2 Receiver CD modes will have their own volume Using the Volume Lock feature on page 23
94. ve entered the correct code If the device does not respond to the remote control you may have entered the wrong code Repeat steps 3 and 4 using another code 5 Press MODE to select the TV mode to control the TV Searching and sampling the code of a device 8500 If you do not know the device code for a particular target unit you POWER can cycle the remote control through the available codes for that device mode and sample the functions to find the code that properly Numbers operates the target device The keys available to be sampled provided MODE they are applicable to that mode are POWER 1 VOL A CH A and PLAY Invalid keys will be ignored while in program mode To cycle through each available device code and sample its functions 1 Press MODE to select the mode you want to set up 2 While holding down the RECALL button press 8 5 0 0 The remote control will enter program mode 3 Point the remote control at the target device and press POWER or other function buttons that are available to be sampled RECALL 4 If the device responds to the remote control Press RECALL to store the device code The mode indicator will blink twice and the remote control will exit the program mode If the device does not respond to the remote control Press A and then press POWER Repeat this step until the device responds to the remote control and then press RECALL Note When a search cycle is completed the mode
95. vel You can adjust the brightness of the gtay zone of the screen when in the 4 3 mode To adjust the gray level 1 Press MENU and then press or P until the SET UP menu appears 2 Press A or W to highlight GRAY LEVEL a GEO Oe a LONG Li FE Ava 3 Press lt 4 or P to select the gray level from 1 2 or 3 1 Dark gray 2 Mid gray 3 Light gray 62 Displaying on screen information Press RECALL to display the following information on screen Antenna mode when in TV mode Channel number or video mode selected Remaining time of ON SLEEP time if set Channel label if ser Stereo or SAP audio status V CHIP rating status e Picture size STEREO ee REO SAP Pa oN Pue on T IMER nasm SLEEP MER SLEEP TIMER fha4m RECALL Viewing the demonstration mode The demonstration mode will demonstrate several of your TV s ____ TV front panel features To start the demo Press and hold MENU on the TV control panel for 4 seconds To stop the demo MENU POWER Press RECALL EXIT or POWER Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 POWER minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day This feature does not work in VIDEO mode Understanding the last mode memory feature If the power is cut off while you are viewing the 1V the Last Mode Memory feature t
96. w Press the REC button twice within 5 seconds to record each a TV by default When the volume is un ven if Volum udio video saurce Active VCR DVD is defined as the mode that remains for a minimum of 5 locked all the devices will have their own volume e Lock is on TV CABLE SAT VCR or DVD See Programming the remote control for use with your audio video devices Note Device code setup Every time you replace the batteries you 1 Refer to the Device code table on pages 24 25 to find the code must reprogram the remote control for the brand of your device Some newer VCRs are capable of working on either of two remote codes These VCRs If more than one number is listed try each one separately until have a switch labeled VCRI VCR2 you find the one that works if your VCR has this kind of switch and 2 Press MODE until the Mode indicator of the device CABLE does not respond to any of the codes for SAT VCR DVD AUDIO1 AUDIO2 lights up your VCR brand set the switch to the other 3 While holding down the RECALL button press the Channel position VCRI or VCR2 and reprogram Number buttons to enter the four digit code of your brand of the remote control device If a valid code is entered the mode indicator will blink twice If an invalid code is entered the mode indicator will blink one long blink 4 Point the remote control at the device and press POWER to test the code If the device turns on you ha
97. w preferences wees ceeeeeaes Using CableClear DNR Digital Noise Reduction 21912922222222227202 88 1 50 Selecting the color temperature e oeu 50 Resetting your picture quality adjusuments 51 Selecting the video input source e eeeueeeeueeieeeieeu 51 Labeling the video input sources e uuu e u 1 ue nenn 52 Selecting the background of the menu display 52 Using the closed caption feature eueuuueeiisieieieeu 53 Setting the ON timer ueuue1u 1 7 99 sm mnr nn nnsn niii D Serting the sleep mer uii Jade gr RYD on 54 Adjusting the sound iarsira iiinn 55 Muting the sound u u1u9uu 22222 979 88 mmm mm 0099 55 Selecting sterco SAP broadcasts 1 999 925 55 Enjoying the Dolby Virtual sound feature 56 Enjoying the WOW surround sound feature 56 Adjusting the sound quality ccccecseesseeeeeeeees 57 Resetting your audio adjustments 9 1 0 n 57 Using the sub bass system SBS Turning off the built in speakers Selecting the Audio OUT sound Using the StableSound feature Adjusting the long life features woe cesta eeeeeeae Displaying on screen information eeeeeeeieiueeiun Viewing the demonstration mode 1 1 9 Understanding the auto power off feature 62 Understanding the last mode memory feature 62
98. w this symbol WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions NOTE TO CATV INSTALLERS IN THE USA This is a reminder to call the CATV system installer s attention to Article 820 40 of the NEC which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical For additional antenna grounding information see items 25 and 26 on page 4 NOTICE OF POSSIBLE TV STAND INSTABILITY DANGER RISK OF SERIOUS PERSONAL AN INJURY OR DEATH Use the Plasma Color TV only with the following optional TV stand or bracket use with any other type of optional accessories may cause instability which could result in the possibility of injury This servicing instructions are for use by qualified service personnel only Pedestal stand FPT TS42E Angled wall hanging bracket FPT TA4 When installing the TV leave a space of at least 4 inches around the TV Child Safety It Makes A Difference Where Your TV Stands Congratulations on your purchase As you enjoy your new TV keep these safety tips in mind The Issue U If you are like most consumers you have a TV in your home Many homes in fact have more than one TV U The home theater entertainment experience is a growing trend and larger TVs are
99. window boed Main window e h 7 POP window 2 Select channels of the POP window in the following two ways To change to a specific channels press POP DIRECT CH While POP is on the screen press the Channel Number buttons 0 9 and 100 To change the next programmed channels press POP CH AY If the V CHIP feature is active and you try to watch a TV program that exceeds your set rating limits the program will be blocked see Using the V CHIP menu on page 44 To display a picture from an external source in the POP window 1 Connect the external source equipment see Connecting your TV on page 9 2 Select the TV program you want to watch in the main window Press SPLIT to display the POP window 4 Repeatedly press SOURCE to select the input source for the POP window VIDEO 1 VIDEO 2 VIDEO 3 ColorStream HD1 j or ColorStream HD2 only you cannot select DVI in POP mode The current source will display in purple Qe 5 You can play a tape as the POP picture or select a channel for the POP window using the VCR s channel keys POP SOURCE S O Tv VIDE VIDE VIDE 1 Color S Color S While the above menu is on the screen you can select the desired signal input source by pressing the corresponding number button 0 5 To close the POP window Press SPLIT again or EXIT Note The SPLIT buttons on the remote control operate the TV s POP features You can

Download Pdf Manuals

Related Search

Related Contents

ディスポーザブル回転クリップ装置 HX-201LR  Notice d`utilisation  Sonde d`intubation endotrachéale préformée  3 - Caliber Equipment Inc.  Troubleshooting Sony DVD/VHS Movies  Operating Instructions  VR Hall Module Kit User`s Manual D000015 Rev B  manual de instrucciones  Exhibitor Service Manual  Samsung RG2281RCAWB Manuel de l'utilisateur  

Copyright © All rights reserved. Failed to retrieve file