Siemens 9000407137(8811) Dishwasher User Manual
Contents
1. en Instructions for use SIEMENS ala iva E if i piss MU 4 Wve J ji EU AIC pal aa eee yl i Ul en Index Safety instructions Delivery 0 nan Installation In daily use Children in the household Childproof lock door lock Damage cics 1 2 n mg mnt teas Disposal Getting to know your appliance Control panel Appliance interior Selecting language Water softening system SEL isa at ao aal ah hare Salt ak mass USING salt rk ieaaa ks mnt Switching off salt refill indicator water softening system Rinse aid Setting amount of rinse aid Switching off rinse aid refill indicator Utensils Not suitable Glass and utensil damage Loading the dishwasher Unloading the dishwasher Cups and glasses Pans kratid bane Folding spikes Cutlery drawer Small accessories holder Adjusting the height of the basket Detergent Adding detergent Overview of programmes Programme selection Information about comparability tests Additional options Eco Option Halt load2. Carefully pour rinse aid up to the max mark in the filler opening Close cover until it clicks shut To prevent excessive foam formation during the next rinse cycle remove any rinse aid which has run over with a cloth Setting amount of rinse aid The amount of rinse aid dispensed can be set from 00 to 5 The factory setting isr 45 Do not change the amount of rinse aid unless streaks select lower setting or water stains select higher setting are left on the utensils Open the door Switch on ON OFF switch 1 Hold down programme button A and press START button 10 until on the digital display is indicated H f Release both buttons The LED for button A flashes and the digital display displays the factory setting HOH Press programme button A until the factory set value 5 is indicated on the digital display 3 To change the setting press programme button C Each time the button is pressed the set value increases by one level when the value of r UG has been reached the display jumps back to r UL off Press START button 10 The set value is saved Close the door Switching off rinse aid refill indicator If the rinse aid refill indicator 6 is impaired e g when using combined detergents containing rinse aid component it can be switched off Proceed as described under Setting amount of rin
3. during the wash cycle 9 Unusual foam formation Handwash liquid in the rinse aid dispenser Spilled rinse aid causes excessive frothing therefore please remove with a cloth Appliance stops during the wash cycle Power supply interrupted Water supply interrupted Knocking rattling noise during rinsing Spray arm is striking utensils Utensils not arranged correctly 21 en Filling valves making striking noises Caused by the installation of the water line and has no effect on the function of the machine Remedial action is not possible on the utensils Food residue on the utensils Utensils placed too closely together utensils basket overfilled Too little detergent Rinse programme too weak Spray arm rotation obstructed Spray arm nozzles blocked Filters blocked Filters incorrectly inserted Waste water pump blocked Top basket on right and left not set to same height Tea or lipstick residue is not completely removed Detergent has inadequate bleaching effect Too low rinsing temperature Too little unsuitable detergent White stains on the utensils glasses remain milky If phosphate free detergents are used with hard tap water white deposits may be deposited more easily on utensils and the container walls Too little unsuitable detergent Too weak programme selected No too little rinse aid Noftoo
4. top up the salt depending on model Using detergents with salt component If combined detergents with a salt component are used salt can usually be omitted up to a water hardness of 21 dH 37 fH 26 Clarke 3 7 mmol l If the water hardness is over 21 dH salt must be used en Switching off salt refill indicator water softening system If the salt refill indicator 5 is impaired e g when using combined detergents containing salt component it can be switched off Proceed as described under Setting water softening system and set the value to 00 The water softening system and salt refill indicator are now switched off A Warnings Never fill the salt dispenser with detergent You will destroy the water softening system To prevent corrosion always refill with salt immediately before switching on the appliance Rinse aid As soon as the rinse aid refill indicator 6 lights up on the control panel refill with rinse aid The rinse aid is required for stain free utensils and clear glasses Use only rinse aid for domestic dish washers Combined detergents with rinse aid com ponent may be used up to a water hard ness of 21 dH 37 fH 26 Clarke 3 7 mmol l only If the water hardness is over 21 dH rinse aid must be used Open the dispenser 29 by pressing and lifting the plate on the cover
5. until on the digital display 4 1 is indicated Release both buttons The LED for button A flashes and the digital display displays the factory setting 4 0 Press programme button A until the factory set value 4 is indicated on the digital display 3 To change the setting By pressing the C button you can switch the onboard computer additional programme information off L ODO or on CU i Press START button 10 The set value is saved Close the door 16 Timer programming You can delay the start of the programme in 1 hour steps up to 24 hours Open the door Switch on ON OFF switch 1 Press 8 button until the timer programming display 7 jumps to 7 Press 8 or button until the displayed time corresponds with your requirements Press START button 10 timer programming is activated To delete timer programming press the 8 or button until 727 is indicated on the digital display 7 You can change your programme selection at any time until the programme starts Close the door End of programme The programme has ended when the value 2 02 is indicated on the numerical display 3 The end of the programme is also indicated by an acoustic signal This f
6. 19 To change the language Open the door Switch on ON OFF switch Hold down programme button A 1 and press START button 10 until the digital display 3 4 1 Release both buttons is indicated Press programme button A until the factory set value is indicated on the digital display 3 Deutsch is indicated in the display window 12 Press programme button Cc Each time the button is pressed the set value increases by 1 after 1 19 the setting goes back to 1 11 Press START button 10 The set value is saved Close the door Water softening system To ensure good washing results the dishwasher reguires soft water i e containing low amounts of lime otherwise white limescale will be deposited on the utensils and inner container Tap water above 7 dH from set value i must be softened The water is softened with salt regeneration salt in the water softening system of the dishwasher The setting and therefore the required amount of salt depends on the degree of hardness of your tap water see table Set The amount of salt dispensed can be set from 4 00 to 4 47 Sal is not required at the set value H 77 Find out about the hardness value of your tap water Your water supply company will assist you Set valu
7. have only a few items to wash e g glasses cups plates you can switch to half load This will save water energy and time It is recommended to put a little less detergent in the detergent dispenser than for a full load Hygiene The temperature is increased during the rinsing process This increases the hygiene status This additional option is ideal for cleaning e g chopping boards and baby bottles IntensiveZone Perfect for a mixed load You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket The spray pressure in the lower basket is intensified the rinsing temperature is increased slightly Extra drying An increased temperature during the final rinse and an extended drying phase mean that even plastic parts dry well There is a slight increase in the energy consumption en Washing the dishes Programme data The programme data consumption values can be found in the summary of instructions They refer to normal conditions and the water hardness set value 4 14 Different influencing factors such as water temperature or line pressure may result in deviations Agua sensor depending on model The Agua sensor is an optical measuring device light barrier which measures the turbidity of the rinsing water The Agua sensor is used according to the programme If the Aqua sensor is active clean rinsing water can be transfe
8. iicid22ceaednaeeees Hygiene 14 15 15 15 15 IntensiveZone Extra drying Washing the dishes Programme data Aqua sensor Switching on the appliance Remaining running time display Display window Timer programming End of programme Switching off the appliance Interrupting the programme Terminating the programme Reset Changing the programme Intensive drying Interior light Maintenance and care Overall condition of the machine Filters Spray alms Waste water pump Troubleshooting when the appliance is switched on on the appliance Changing settings during the wash cycle onthe utensils Customer service Installation Safety instructions Delivery i td amt Installation Waste water connection Fresh water connection Electrical connection Removing the appliance Transportation Protection against frost Waste disposal Packaging Old appliances 15 15 15 15 15 15 16 16 16 16 17 17 17 17 17 18 18 18 19 19 20 20 20 20 21 21 22 23 23 23 24 24 24 24 25 25 25 25 26 26 26 en Safety instructions Delivery Check the packaging
9. see chapter entitled Terminating the programme Reset and start all over again You did not wait until programme ended Cover on the detergent dispenser cannot be closed Detergent dispenser overfilled or mechanism blocked by sticky detergent residue Detergent residue in the detergent dispenser Dispenser was damp when filled 0 check water supply 4 display lights up Tap turned off Water supply interrupted Supply hose kinked Filter in the water supply blocked Switch off the appliance and pull out the mains plug Turn off the tap Clean filter in the supply hose Reconnect power supply Turn on the tap Switch on the appliance en Water is left in the appliance at the end of the programme E24 Waste water hose is blocked or kinked E25 Waste water pump blocked cover on the waste water pump is not locked in position see Maintenance and Care Filters blocked The programme has not yet ended Wait until programme ends digital display indicates 0 00 or implement the Reset function 0 Refill indicator for salt 5 and or rinse aid 6 is not lit Refill indicator s switched off Adequate salt rinse aid available Refill indicator for special salt 5 is lit Nosalt Refill with salt Sensor does not detect salt tablets Use different special salt
10. the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result Tip Follow the instructions for use or the instructions on the detergent packaging to ensure that rinse aid and salt are used effectively If you have further questions we recom mend that you contact the detergent manufacturers helpline Detergent dispenser with dosing aid The graduated detergent dispenser 30 helps you add the correct amount of powder or liquid detergent lower line 15 ml middle line 25 ml full 50 ml Adding detergent Pour detergent into the dispenser 30 insert tablet flat not on its edge Dosage see manufacturer s instructions on the packaging Close the cover on the detergent dispenser by sliding it up until the lock engages without difficulty The detergent dispenser opens automatically at the optimum time depending on the programme The powder or liquid detergent is distributed in the appliance and is dissolved the tablet falls into the tablet collecting tray where it dissolves in doses Tip If the utensils are only lightly soiled slightly less than the indicated amount of detergent is usually adequate A Warnings Do not place small parts for washing in the tablet collecting tray 24 this prevents the tablet from dissolving evenly f you want to add more utensils after the programme has started do not use the
11. wide valid return and re use of old appliances 26 en Subjekt to modification Child proof lock 42 40 Switch on the child proof lock Always close the appliance door 41 Open the door with child proof completely before leaving the lock switched on appliance Only in this way can you 42 Switch off the child proof lock protect your children from potential hazards Baking sheet spray head Large sheets or grilles and plates which have a diameter greater than 30 cm gourmet plates pasta plates dinner plates can be cleaned with the aid of the spray head To do this remove the top basket and insert the spray head as illustrated in the diagram To ensure that the spray jet can reach all parts arrange the baking sheets as illustrated max 4 baking sheets and 2 grilles Never operate the dishwasher without the top basket or baking sheet spray head some models AQUA STOP guarantee does not apply to appliances without Aqua Stop In addition to warranty claims against the seller based on the purchase contract and in addition to our appliance warranty we will pay damages under the following conditions 1 If our Aqua Stop system is defective and causes water damage we will make good the damage for private users To ensure water damage protection the appliance must be connected to the power supply This liability guarantee is valid for th
12. ammes for your appliance can be found on the fascia Programme Type of utensils Programme seguence Possible and soiling additional options Auto 65 75 auto Auto 45 65 auto Auto 35 45 Rapid 45 Prerinse INN GAN Pots utensils and cutlery Highly soiled Utensils and cutlery Normally soiled Utensils and cutlery Normally soiled Utensils and cutlery Lightly soiled Utensils and cutlery Lightly soiled Lightly soiled Programme selection You can select a suitable programme according to the type of utensils and degree of soiling Is optimised according to the soiling with the aid of sensors Is optimised according to the soiling with the aid of sensors Prerinse Clean 50 Intermediate rinse Final rinse 65 Dry Is optimised according to the soiling with the aid of sensors Clean 45 Intermediate rinse Final rinse 55 Prerinse Information about comparability tests The conditions for running comparability tests can be found on the supplementary sheet Information for comparability tests 14 IntensiveZone Eco Option Half load Extra drying Extra drying Additional options depending on model Additional options 9 buttons can be set with the Eco Option Water and energy consumption can be reduced with the Eco Option function The running time is extended for optimum washing and drying results Half load If you
13. and dishwasher immediately for damage caused in transit Do not switch on a damaged appliance but contact your supplier Please dispose of the packaging material in an environmentally friendly manner Do not let children play with packaging and its parts There is a risk of suffo cation from collapsible boxes and film Installation Read the Installation chapter to learn how to install and connect the appliance correctly In daily use Use the dishwasher only in the household and only for its designed purpose i e for washing domestic dishes Do not lean or sit on the open door The appliance could tip Please note that free standing appliances may tip over if the baskets are overloaded Do not add any solvents to the washing chamber Danger of explosion Open the door carefully when the programme is still running There is a risk of hot water spraying out of the appliance To prevent injuries e g caused by stumbling open the dishwasher only briefly in order to load and unload the dishwasher Read and observe the safety infor mation and instructions for use on the packaging for cleaning and rinsing agents A Warning Knives and other utensils with sharp points must be placed horizontally in the cutlery drawer Children in the household If fitted use the childproof lock An exact description can be found in the back of the envelope Do not allow children
14. ar for several minutes and then close Otherwise expansion pressure may cause the appliance door to spring open or water to run out of the appliance To continue the programme switch on the ON OFF switch 1 again Close the door en Terminating the programme Reset Open the door Press START button 10 for approx 3 sec 7 1 is indicated on the digital display 3 Close the door The programme sequence lasts approx 1 min 2 02 is indicated on the digital display 3 buzzer sounds Open the door Switch off ON OFF switch 1 Close the door Changing the programme When the START button has been pressed the programme cannot be changed The only way a programme can be changed is by Cancel programme reset Intensive drying The final rinse uses a higher temperature which improves the drying result The running time may increase slightly Caution if utensils are delicate Open the door Switch on ON OFF switch 1 Hold down programme button A and press START button 10 until on the digital display 4 1 is indicated Release both buttons The LED for button A flashes and the digital display displays the factory setting 4 04 Press programme button _A until the factory set value UL is indicated on the digital display 3 To change the setting Press the button C to switch intensive drying
15. ccessible following installation an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety regulations Waste water connection The required work sequence can be found in the installation instructions If required fit a siphon with an drainage connection Connect the waste water hose to the drainage connection of the siphon with the enclosed parts Ensure that the drainage hose is not kinked crushed or twisted and that there is no cover plate in the drainage to prevent the waste water from flowing out Fresh water connection Connect the fresh water connection to the tap according to the installation instructions with the enclosed parts Ensure that the fresh water connection is not kinked crushed or twisted When replacing the appliance always use a new water supply hose Water pressure at least 0 05 MPa 0 5 bar maximum 1 MPa 10 bar At a higher water pressure connect pressure reducing valve ahead Inlet rate minimum 10 litres minute Water temperature cold water preferred hot water max temp 60 C Electrical connection Connect the appliance to an alternating current only ranging from 220 V to 240 V and 50 Hz or 60 Hz via a correctly installed socket with protective earth conductor See rating plate for required fusing 32 The socket must be near the appliance and freely accessible followin
16. cm 33 cm max Setting 2 20 5cm 30 5cm max Setting 3 23 cm 28 cm max O en Pull out the top basket 22 To lower the basket press in the left and then the right lever on the outside of the basket In doing so hold the sides of the basket along the upper edge to prevent it from suddenly dropping To raise the basket hold the basket on the sides of the upper edge and lift it up Before re inserting the basket again ensure that it is at the same height on both sides Otherwise the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit 12 Detergent You can use tablets as well as powder or liquid detergents for dishwashers but never use washing up liquid Tablets contain not only detergent but also rinse aid and salt 3in1 and depending on the combination 4in1 Sin1 etc additional components such as glass protection or stainless steel cleaner If tablets contain rinse aid and salt it is usually not necessary to add additional rinse aid and salt up to a specific degree of hardness If the degree of hardness is higher and if using solo detergents powder or liquid detergents or tablets without rinse aid and salt rinse aid and salt must be added The appliance doses these automatically according to the preset values for water hardness and amount of rinse aid As soon as combined detergent products are used
17. e can be found in the water hardness table Open the door Switch on ON OFF switch 1 Hold down programme button A and press START button 10 until on the digital display is indicated H f Release both buttons The LED for button LA flashes and the digital display displays the factory setting 4 04 To change the setting press programme button Each time the button is pressed the set value increases by one level when the value of H O 1 has been reached the display jumps back to H 2 7 off Press START button 10 The chosen setting has now been stored Close the door Water hardness table Water Hardness onthe mmol l Set value machine T soft 0 1 1 soft 1 2 1 4 11 12 x medium 1 5 1 8 13 15 medium 1 9 2 1 16 20 medium 2 2 2 9 21 26 hard BIOS 27 38 hard 3 8 5 4 50 02 hard 5 5 8 9 o a Oo en Salt Using salt Always refill with salt immediately before switching on the appliance This ensures that overrun salt solution is immediately washed out and does not corrode the rinsing tank Open the screw type cap of the compartment 26 Fill the tank with water only required when switching on the appliance for the first time Then add dishwasher salt not table salt or tablets The water is displaced and runs out As soon as the salt refill indicator 5 on the fascia is lit
18. e service life of the appliance A prerequisite for the warranty claim is that the appliance has been correctly installed and connected with Aqua Stop according to our instructions This also includes the correct installation of the Aqua Stop extension original accessory Our warranty does not extend to defective feed lines or fittings up to the Aqua Stop connection on the tap lf your appliance is fitted with Aqua Stop you can leave your appliance unattended during operation and leave the tap turned on afterwards The tap should only be turned off if you are absent from home for a prolonged period e g several weeks holiday Siemens Electrogerate GmbH Carl Wery SiraBe 34 81739 M nchen To contact us directly use the tel no or fax no in the enclosed customer service list www siemens homeappliances com 9000 407 137 en 8811 640TV 3bel
19. er to drain does not obstruct rotation of the two spray arms 23 and 25 Very small utensils should not be washed in the machine as they may fall out of the baskets Unloading the dishwasher To prevent water from dripping off the upper basket onto the utensils in the lower basket it is recommended to empty the appliance from the bottom up Cups and glasses Top basket 22 Pans Bottom basket 28 NGI Tv T Folding spikes depending on model The spikes can be folded down to improve arrangement of pans bowls and glasses Cutlery drawer Arrange the cutlery in the cutlery drawer 21 as illustrated Separately arranged utensils are easier to remove after washing The drawer can be taken out Small accessories holder depending on model Light weight plastic accessories e g cups lids etc can be held securely in the small accessories holder en Adjusting the height of the basket The height of the upper utensils basket can be adjusted in 3 stages to create more space either in the upper or lower basket Appliance height 81 5 cm Top Bottom basket basket Setting 1 16cm 30 cm max GE 18 5cm 27 5cm max max O Appliance height 86 5 cm Top Bottom basket basket Setting 1 18
20. even during the warranty period en Installation The dishwasher must be connected correctly otherwise it will not function properly The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the reguired criteria as specified in the following paragraphs or in the installation instructions Install the appliance in the correct seguence Checking appliance on delivery Installing the appliance Waste water connection Fresh water connection Electrical connection Safety instructions Install and connect the appliance according to the installation and assembly instructions Prior to installation disconnect the dishwasher from the power supply Ensure that the protective conductor system of the domestic supply has been correctly installed The electrical connection conditions must correspond with the specifications on the dishwasher rating plate Ifthe power cord of this appliance is damaged it must be replaced with a particular power cord To prevent injury the power cord may be replaced by customer service only If the dishwasher is installed in a high sided unit the unit must be secured properly Install built under or integratable appliances only under continuous worktops which have been screwed to adjacent cupboards to ensure stability 23 en Do not install the appliance near heat sources radiators heat storage tanks cookers
21. g installation The connection may be modified by technicians only A power cord extension may be purchased from customer service only Use only a residual current operated circuit breaker which features the symbol Only this extension guarantees compliance with the currently valid regulations The appliance features a water damage protection system Please note the system will function only when the power supply is connected Removing the appliance Also observe the seguence of worksteps here Disconnect the appliance from the power supply Turn off the water supply Disconnect the waste water and fresh water connections Loosen the fastening screws under the worktop Iffitted remove the base panel Pulloutthe appliance carefully pulling the hose behind en Transportation Empty the dishwasher and secure loose parts Drain the appliance according to the following steps Turn on the tap Open the door Switch on ON OFF switch 1 The displays of the last selected programme light up Select programme with the highest temperature The expected programme duration is indicated on the numerical display 3 Press START button 10 Close the door The programme starts running Open door after approx 4 minutes Press the START button 10 until on the digital display is indicated 2 1 Close the door Open do
22. install filter system in reverse seguence and ensure that the arrow marks are opposite each other after closing the filter system en Spray arms Limescale and contaminants in the rinsing water may block nozzles and bearings on the spray arms 23 and 25 Check outlet nozzles on the spray arms for blockages Unscrew the upper spray arm 23 Remove the lower spray arm upwards Clean spray arms under running water Re engage or screw on spray arms 19 en Waste water pump Large food remnants in the rinsing water not retained by the filters may block the waste water pump The rinsing water is then not pumped out and covers the filter In this case First disconnect the appliance from the power supply Remove the filters 27 Scoop out water use a sponge if required Using a spoon prise off pump cover as illustrated until it clicks then grip the cover by the lug and first pull it upwards until it resists and then pull it out forwards Check inner compartment and remove any foreign objects Place cover in the original position press down and engage Install filters 20 Troubleshooting Experience has shown that you can rectify most faults which occur in daily operation without calling customer service Obviously this will save on costs and ens
23. liance without utensils in the programme with the highest rinsing temperature Clean the appliance with detergents appliance cleaners which are particularly suitable for use with dishwashers Regularly clean door seal with a damp cloth Never use a steam cleaner to clean your dishwasher The manufacturer is not liable for any consequential damage Regularly wipe the front of the appliance and fascia with a damp cloth water and a little washing up liquid are adequate Do not use sponges with a rough surface or abrasive detergents as these could scratch the surfaces Stainless steel appliances To prevent corrosion avoid using sponge cloths or wash them out thoroughly several times before using for the first time A Warning Never use other chlorinated household detergents Health hazard Salt and rinse aid Check the refill indicators 5 and 6 If required refill salt and or rinse aid Filters The filters 27 keep large foreign objects in the rinsing water away from the pump These foreign objects may occasionally block the filters The filter system consists of a coarse filter a flat fine filter and a microfilter After each washing cycle check the filters for residue Unscrew filter cylinder as illustrated and take out filter system Remove any residue and clean filters under running water Re
24. little salt Water softening system set to the wrong value Salt dispenser lock not fastened Contact the detergent manufacturer in particular if 22 the utensils are very wet at the end of the programme limescale forms Dull discoloured glasses film cannot be washed off Unsuitable detergent Glasses not dishwasher proof Streaks on glasses and cutlery glasses have metallic appearance Too much rinse aid Plastic parts discoloured Too little unsuitable detergent Too weak programme selected Rust spots on the cutlery Cutlery not rust resistant Salt content in the rinsing water too high as salt dispenser lock not fastened firmly or salt was spilled while being refilled Utensils not dry Appliance door opened too early and utensils taken out too early Programme selected without drying Too little rinse aid Customer service If you are unable to rectify the fault please contact your customer service Your nearest customer service centre can be found in the customer service list When calling customer service please guote the appliance number 1 and the FD number 2 which can be found on the rating plate 32 on the appliance door 1 lee A Warning Please note that a visit by a customer service technician to repair a malfunction or one ofthe described faults will not be free of charge
25. nd the interior of the appliance can be found in the envelope at the front Individual positions are referred to in the text Control panel ON OFF switch Programme buttons Digital display Display Check water supply Salt refill indicator Rinse aid refill indicator Timer programming display Time delay Additional options 10 START button 11 Door Opener 12 Display window Oji AI on co NO Number depending on model Appliance interior 20 Interior light 21 Cutlery drawer 22 Top basket 23 Top spray arm 24 Tablet collecting tray 25 Bottom spray arm 26 Dispenser for salt 27 Filters 28 Bottom basket 29 Dispenser for rinse aid 30 Detergent dispenser 31 Lock for detergent dispenser 32 Rating plate depending on model en Selecting language The language in the display window 12 can be set from 1 to 19 Deutsch 1 0 is the factory setiiha Language Setting Deutsch L 01 English L 02 Fran ais L 03 Nederlands L 04 Italiano L 05 EAAHNIKA L 06 Espanol L 07 Portugu s L 08 Svenska L 09 Norsk L 10 Suomi L 11 Dansk L 12 T rk e L 13 PYCCKMM L 14 Polski L 15 Ce L 16 Magyar L 17 Croatian L 18 Slovenian L
26. on 4 0 or off S LU Press START button 10 The set value is saved Close the door 17 en Interior light 20 The interior light comes on when the door is opened irrespective of whether the ON OFF switch 1 is switched on or off When the door is closed or ajar the light is off Open the door Switch on ON OFF switch 1 Hold down programme button LA and press START button 10 until 4 1 is indicated on the digital display Release both buttons The LED for button A flashes and the digital display displays the factory setting HOH Press programme button A until the factory set value 4 is indicated on the digital display 3 To change the setting Press the button C to switch the interior light off E UC or on E L 1 Press START button 10 The set value is saved Close the door depending on model 18 Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults This saves time and prevents problems Overall condition of the machine Check spray arm for grease and limescale deposits If you find such deposits Fill detergent dispenser with detergent Start the app
27. or after approx 1 minutes The numerical display indicates 2 00 Switch off appliance off the tap Transport appliance upright only This prevents residual water from running into the machine control and damaging the programme sequence and turn Protection against frost If the appliance is in a room where there is a risk of frost e g holiday home empty the appliance completely see Transportation Turn off the tap disconnect supply hose and drain water 25 en Waste disposal Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials Please dispose of the individual parts separated according to type Please ask your dealer or inguire at your local authority about current means of disposal Packaging All plastic parts of the appliance are identified with internationally standardised abbreviations e g gt PS lt polystyrene Therefore plastic waste can be sorted out when the appliance is being disposed of Please follow the safety instructions under Delivery of your appliance Old appliances Please follow the safety instructions under Disposal of your appliance mmm is appliance is identified according to the European guideline 2002 96 EC on waste electrical and electronic equipment WEEE The guideline specifies the framework for an EU
28. or other appliances which generate heat and do not install under a hob After installing the appliance ensure that the plug is easily accessible Some models The plastic housing on the water connection contains an electric valve the connecting cables are in the supply hose Do not cut through this hose do not immerse the plastic housing in water A Warning If the appliance is not in a cavity and a side panel is accessible the door hinge area must be covered at the side for reasons of safety risk of injury The covers are available as optional accessories from customer service or specialist outlets Delivery Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order This may cause small water stains These will disappear after the first wash cycle Installation The required installation dimensions can be found in the installation instructions Level the appliance with the aid of the height adjustable feet Ensure that the appliance is situated securely on the floor A built under or integrated appliance which is installed subsequently as a free standing appliance must be secured to prevent it from overturning e g by screwing it to the wall or by installing it under a continuous worktop which is screwed to adjacent cupboards 24 The appliance can easily be installed in a fitted kitchen between wooden and plastic walls If the plug is not freely a
29. rred to the next rinse bath and water consumption can be reduced by 3 6 litres If the turbidity is greater the water is drained and is replaced with fresh water In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling Switching on the appliance Turn onthe tap fully Open the door Switch on ON OFF switch 1 The display of the last selected programme flashes This programme remains selected if no other programme button 2 is pressed The expected programme duration flashes on the digital display 3 Press the START button 10 Close the door The programme starts running 15 en Remaining running time display When the programme is selected the remaining running time of the programme is indicated on the digital display 3 The running time is determined during the programme by the water temperature the number of utensils as well as the degree of soiling and may vary depending on the selected programme Display window Apart from information on the programme sequence the display window 12 also indicates additional information on e g glass protection system is active If you would no longer like to have this additional information displayed proceed as follows Open the door Switch on ON OFF switch 1 Hold down programme button A and press START button 10
30. se aid and set the value to r00 The rinse aid refill indicator 6 switched off is now en Utensils Not suitable Cutlery and utensils made of wood Delicate decorative glasses craft and antigue utensils These decors are not dishwasher proof Plastic parts not resistant to heat Copper and tin utensils Utensils which are soiled with ash wax lubricating grease or ink Aluminium and silver parts have a tendency to discolour and fade during the wash cycle Even some types of glass e g crystal glass objects may turn cloudy after many wash cycles Glass and utensil damage Causes Glass type and glass production process Chemical composition of the detergent Water temperature of the wash programme Recommendation Use only glasses and porcelain which the manufacturer designates as dishwasher proof Use a detergent which protects utensils Take glass and cutlery out of the dishwasher as soon as possible after the programme ends en Loading the dishwasher Remove large food remnants It is not necessary to prerinse utensils under running water Place the utensils so that they are secure and cannot tip over all utensils with their openings face down parts with curves or indentations are at an angle thereby allowing wat
31. tablet collecting tray 24 as a handle for the upper basket The tablet could already be there and you will touch the partially dissolved tablet en Note You will obtain optimum rinsing and drying results by using solo detergents and applying salt and rinse aid separately f programmes are short tablets may not have full cleaning effect due to different dissolving properties and there may even be undissolved detergent residue It is recommended to use washing powder for these programmes The Intensive programme on some models requires one tab only When using washing powder you can apply some of this cleaning agent to the inside of the appliance s door Even if the rinse aid and or salt refill indicator is lit the rinse programme will run correctly if combined detergents are used when using combined detergents add rinse aid at a water hardness above 21 dH see chapter entitled Rinse aid If you switch from combined detergents to solo detergents ensure that the water softening system and amount of rinse aid have been set to the correct value If using detergents in a water soluble protective cover Take hold of the cover with dry hands only and put the detergent into an absolutely dry detergent dispenser only otherwise the detergent may stick 13 en Overview of programmes The max possible number of programmes is illustrated in this overview The corresponding progr
32. to play with or operate the appliance Keep children away from detergents and rinse aid These may cause chemical burns in the mouth throat and eyes or asphyxiation Keep children away from open dishwasher The water in the rinsing compartment is not drinking water and could contain detergent residue Ensure that children do not place fingers in the tablet collecting tray 24 Small fingers could become caught in the slots Ifthe appliance is installed at eye level ensure when opening and closing the door that children are not caught or crushed between the appliance door and the cupboard door situated below Childproof lock door lock The description of the childproof lock is at the back in the envelope Damage The appliance may be repaired and opened up by a technician only To do this disconnect the appliance from the power supply Pull out the mains plug or switch off the fuse Turn off the tap Disposal Make redundant appliances unusable to prevent subseguent accidents Dispose of the appliance in an environmentally friendly manner A Warning Children could become locked in the appliance risk of suffocation or find themselves in other dangerous situations Therefore Pull out the mains plug sever and dispose of the power cord Destroy the door lock so that the door can no longer be closed en Getting to know your appliance Diagrams of the control panel a
33. unction can be changed as follows Open the door Switch on ON OFF switch 1 Hold down programme button A and press START button 10 until on the digital display 4 1 is indicated Release both buttons The LED for button LA flashes and the digital display displays the factory setting H 24 Press programme button _A until the factory set value 4 02 is indicated on the digital display To change the setting press programme button C Each time the button is pressed the set value increases by one level when the value of 4 3 has been reached the display jumps back to 4 07 off Press START button 10 the set value is saved Close the door Switching off the appliance Short time after the end of the programme Open the door Switch off ON OFF switch 1 Turn off the tap not applicable if Aqua Stop fitted Remove the utensils when they have cooled down A Warning At the end of the programme please open the door fully and not partially when emptying the dishwasher Any escaping water vapour could damage sensitive worktops Interrupting the programme Open the door Switch off ON OFF switch 1 The LEDs go out The programme is saved If the door was opened on an appliance which has a warm water connection or is heated first leave the door aj
34. ure that the machine is quickly available again The following overview should help you locate the causes of faults which may occur A Warning If an error code E 01 to E 30 is indicated on the digital display 3 always disconnect the appliance from the power supply and then turn off the tap You can rectify certain faults yourself see following fault description for all other faults please contact customer service and state the indicated fault E XX A Warning Remember Repairs may be carried out by technicians only If a component has to be replaced ensure that only original spare parts are used Improper repairs or use of non original spare parts may cause considerable damage and put the user at considerable risk When the appliance is switched on 9 The appliance does not start The mains fuse has tripped The appliance plug has not been inserted The appliance door has not been shut properly on the appliance Lower spray arm rotates sluggishly Spray arm blocked 9 The door is difficult to open Child proof lock is activated The deactivation instructions are at the back in the envelope depending on model Door cannot be closed Door lock has been activated To reset close the door with greater force Changing settings A setting cannot be changed a programme starts Wrong programme button pressed Terminate the programme
Download Pdf Manuals
Related Search