Shark EP708 Vacuum Cleaner User Manual
Contents
1. freight prepaid to Euro Pro Corporation at the address given below lf the appliance is found by EURO PRO to be defective in material or workmanship EURO PRO will repair or replace it free of charge Proof of purchase date and 19 95 to cover the cost of return shipping and handling must be included In US EURO PRO Corporation 178 West Service Rd Champlain N Y 12919 In Canada EURO PRO Corporation 4400 Bois Franc St Laurent QC H4S 1A7 If the appliance is found by EURO PRO to be defective in material or workmanship EURO PRO will repair or replace it free of charge Include 19 95 to cover the cost of return shipping and handling must be included Non durable parts including without limitation disposable dust bags drive belts rotating brushes and electrical parts which normally require replacement are specifically excluded from warranty The liability of EURO PRO Corporation is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes This limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alterations to the product or any of its parts which have been performed2. by a repair person not authorized by EURO PRO This warranty is extended to the original purchaser of the unit and excludes all other legal and or conventional warranties The responsibility of EURO PRO Corporation if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is EYURO PRO Corporation liable for incidental or consequential damages of any nature whatsoever Some states do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE VPM eecoccooooooooooooooooooooooooooooo0o000000000000000000000000000 OWNERSHIP REGISTRATION CARD Please fill out and mail the product registration card within ten 10 days of purchase in order to validate the foregoing Limited Warranty The registration will enable us to contact you in the unlikely event of a product safety notificatio
3. into the socket and twist clockwise fig S Note Always replace the light bulb with the same or smaller wattage size 12V 4W to prevent damage to the surrounding parts 14 Motor Thermostat Important This motor is equipped with a motor protective thermostat If for some reason the vacuum cleaner should overheat the thermostat will automatically turn the unit off Should this occur e Push the On Off button once e Disconnect the plug from the power source e Check the source of overheating problem i e clogged hose or filter if clogged hose or filter is found unclog the hose and replace the filters e Wait at least 20 minutes before attempting to reuse the vacuum After unit has cooled down for 20 minutes plug in the cleaner and push the On Off button The vacuum should start again e If the vacuum still does not start contact EURO PRO at 1 800 798 7398 This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory If a minor problem occurs it usually can be solved quite easily when the cause is found Therefore this checklist is provided for your convenience TROUBLESHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION Not firmly plugged in Plug unit in firmly CLEANER WON T No electricity in wall plug Check fuse or breaker RUN Blown fuse tripped Replace fuse reset breaker breaker Replace belt Push hose in f
4. IMPORTANT SAFETY INSTRUCTIONS When using your SHARK Bagless Cyclonic Upright basic safety precautions should always be observed including the following Bagless Cyclonic Upright OWNER S MANUAL Model EP708 120V 60Hz 12 Amps For information or assistance USA EURO PRO Corporation Canada EURO PRO Corporation 178 West Service Rd 4400 Bois Franc Champlain NY 12919 St Laurent QC H4S 1A7 Tel 1 866 98shark 1 866 987 4275 www sharkhomecare com WARNING To reduce the risk of fire electrical shock or injury 1 Do not leave vacuum cleaner unattended when it is plugged in Unplug from outlet when not in use and before filters 2 To reduce the risk of electric shock do not use outdoors or on wet surfaces 3 Do not allow children to use as a toy Close attention is necessary when used by or near children 4 Use only as described in this manual Use only manufacturer s recommended attachments 5 Do not use with damaged cord or plug Do not use vacuum cleaner if it has been dropped damaged left outdoors or dropped into water Return appliance to EURO PRO for examination repair or adjustment 6 Do not pull or carry by cord Do not use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces 7 Do not unplug by pulling on cord To unplug grasp the plug not the cord 8 Do not handle plug or vacuum
5. cleaner with wet hands Do not use outdoors or on wet surfaces 9 Do not put any objects into openings Do not use with any opening blocked and do not restrict airflow Keep all openings free of dust lint hair and anything that may reduce airflow 10 Keep hair loose clothing fingers feet and all parts of body away from openings rotating agitator and other moving parts Do not operate cleaner in bare feet or when wearing open toe shoes 11 Do not pick up hot coals cigarette butts matches or any hot smoking or burning objects 12 Do not pick up hard or sharp objects such as glass nails screws coins etc 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Do not use without filters in place Use ONLY filters and accessories provided by EURO PRO Failure to do so will void the warranty Turn off all controls before plugging or unplugging vacuum cleaner Use extra care when vacuuming on stairs Do not pick up flammable or combustible materials lighter fluid gasoline kerosene etc or use in the presence of explosive liquids or vapor Do not pick up toxic material chlorine bleach ammonia drain cleaner etc Do not use in an enclosed space filled with vapors given off by oil based paints paint thinner moth proofing substances flammable dust or other explosive or toxic vapors Always unplug this appliance before connecting or disconnecting vacuum hose Use only
6. cover up with your thumb e Twist the HEPA filter to the right and pull down fig E e The filter is cleaned by tapping or hitting it on a hard surface typically the inside of a trash can fig F Alternatively the filter may also be washed by running it under the tap allowing the water to run on the dirty side Do not wash HEPA filter more often than once every three 3 months Putting water on the inside or clean side will not clean the filter IF WASHED the filter must be allowed to dry overnight before replacing in the vacuum cleaner Fig F Please Note The HEPA dust cup filter should be replaced every 12 months depending on usage Warning It is very important to ensure that the fine dust which adheres to the filter media is completely removed This fine dust powder that is left on the filter will severely reduce the suction performance of your vacuum Clean HEPA filter everytime the dust cup is emptied Warning Always empty the dust cup and clean the HEPA dust cup filter before each use and during prolonged usage Never over fill the dust cup remove dirt and clean the HEPA dust cup filter each time the dust cup is emptied during prolonged usage or risk motor damage OPERATING INSTRUCTIONS cont OPERATING INSTRUCTIONS cont Changing amp Cleaning the Pre Motor Filter The pre motor filter is a washable filter but should be replaced every three 3 to six 6 months depending on usage e R
7. emove the pre motor filter from the dust cover fig G e Rinse the pre motor filter in lukewarm water and dry the filter completely fig H Do not use a washing machine to rinse the filter Do not use a hair dryer to dry it Air dry only Never operate the vacuum without the pre motor filter in place e When the filter is dry replace into the unit and replace the filter cover over it e A severely solid or clogged filter should be thoroughly washed with fresh tepid water A mild detergent can be used if required Fig H 6 8 Changing amp Cleaning the Post Motor Filter The post motor filter is a washable filter but should be replaced every three 3 to six 6 months depending on usage e Remove the filter cover from the rear of the unit fig I e Rinse the post motor filter in lukewarm water and dry the filter completely fig J Do not use a washing machine to rinse the filter Do not use a hair dryer to dry it Air dry only Never operate the vacuum without the post motor filter in place e When the filter is dry replace into the unit and replace the filter cover over it e A severely solid or clogged filter should be thoroughly washed with fresh tepid water A mild detergent can be used if required maz 5 i i ve j Fig J 9 Cleaning the Dust Cup The dust cup can be washed in lukewarm water Do not use strong detergents Ensure that dust cup is fully dry before puttin
8. g back on the machine fig K Do not wash in dishwasher 10 Using the Blower Attachment The vacuum comes with a blower attachment To use this attachment remove the post motor filter cover and replace with the blower attachment fig L Fig L Take the hose part that has the tabs on it and insert into the J slot and turn until it locks fig M Fig M You can use the hose alone or with an extension tube to reach very tight places such as under beds sofas or furniture 11 Operation The upright vacuum can be used on multiple types of carpeting bare floors or upholstery with attachments When using the attachment tools such as the crevice nozzle or the dusting brush place the handle in the upright position fig N e Plug power cord into electrical outlet e Step on the handle release button to release the handle e Press the On Off switch to the On position e You are now ready to vacuum Store or Use Attachments Handle Realease 12 Cleaning amp Changing the Belt Warning Always disconnect from power source when servicing or cleaning the unit Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting Occasionally the power nozzle drive belt will require changing the frequency will depend upon the amount of use your vacuum sees e Turn unit Off and unplug from wall outlet e Use a Phillips screwdriver and remove the four 4 scre
9. he J slots tt Attachment Storage Attachments are stored on the back of the unit Please note that the crevice tool is inside one of the extension tubes All attachments can be used either with the flexible hose alone or with the extension tubes Dusting brush Extension Cord Storage On the back of the vacuum there are three cord hooks around which to wrap the power cord Only the top cord hook has the quick release feature Quick Release Hook To use the hose with an attachment pull out the hose connector from here see arrow above and fit the desired attachment into the connector shock the power cord must be disconnected before removing the dust cup dust cup filter changing the filters or performing maintenance trouble shooting checks 5 Removing amp Emptying Dust Cup The Dust Cup Full indicator will illuminate when the dust cup is full or the air flow is blocked For best performance the dust cup should be cleaned regularly ee empty the dust cup e Press the dust cup release button Fig A e Hold the handle of the dust cup and pull out Fig A e Push the cover of the dust cup open with your thumb Fig B e Empty dust cup directly into dustbin Fig C e Replace dust cup into unit and ensure that it clicks into the correct position Fig D Cleaning HEPA Dust Cup Filter e To remove the HEPA filter from the dust cover push the
10. ing such as cigarettes matches or hot ashes 2 Before inserting the power plug into the wall outlet make sure that your hands are dry TA Bain Do not run appliance over power 3 7 cord 1 On Off Switch 9 Hose Hook 2 Dust Cup Full Indicator 10 Power Cord Hook 3 Dust Cup Release 11 Extension Tubes 2 4 Keep hair loose clothing fingers 8 Do not use without dust cup 4 Dust Cup Cover 12 Upholstery Brush feet and all parts of body away from filter or filters in place 5 HEPA Dust Cup Filter 13 Dusting Brush openings rotating agitator and other 6 Dust Cup 14 Crevice Tool moving parts 9 Before you start vacuuming 7 Head Light 15 Handle Release Pedal mi ot make sure to remove large or 16 Post Motor Filter Ui sharp objects that might 17 Blower Attachment damage the vacuum 8 Flexible Hose Technical Specifications 3 Voltage 120V 60Hz Power 1400 Watts 12 Amps OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS cont Warning To reduce the risk of electric Assembling Your Vacuum Cleaner Note Always remove the power plug from the wall outlet before assembling or removing accessories 1 Handle Assembly Insert handle in place and secure with screw HANDLE 2 Hose Assembl Insert the short hose into the slot before use Be sure to align the tab with the J slot Once the hose is inserted into the adapter it should be twisted to the right to lock the tabs into t
11. irmly Empty dust cup Hose is clogged Remove hose and remove obstruction Broken or worn belt Hose end not securely in place Dust cup is full Weak suction force CLEANER WON T PICK UP Empty dust cup CLEANING Dust cup is full container ACCESSORIES Remove hose and WON T PICK UP remove obstruction Hose is clogged EURO PROX Shark Bagless Cyclonic Upright TO ORDER REPLACEMENT BAGS FILTERS OR BELTS for Model EP708 Call 1 866 98SHARK 1 866 987 4275 Monday to Friday 8 30 A M 5 00 P M Eastern Standard Time or visit our website www sharkhomecare com FOR TECHNICAL SUPPORT for Model EP708 Call 1 800 798 7398 Monday to Friday 8 30 A M 5 00 P M Eastern Standard Time Please Note Both the Pre Motor and Post Motor Filters are washable It should however be replaced every three 3 months to ensure peak performance of your vacuum Important Make sure that the Filters are completely dry before inserting back in the vacuum 10 Model EP708 EURO PROX ONE 1 YEAR LIMITED WARRANTY EURO PRO CORPORATION warrants this product to be free from defects in material and workmanship for a period of one 1 year from the date of the original purchase This warranty applies only to normal domestic household use Should your appliance fail to operate properly while in use under normal household conditions within the one 1 year warranty period return the complete appliance and accessories
12. n By returning this card you acknowledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions In US EURO PRO Corporation 178 West Service Rd Champlain N Y 12919 In Canada EURO PRO Corporation 4400 Bois Franc St Laurent QC H4S 1A7 Model EP708 Appliance model Date purchased Name of store Owner s name Address City State Prov Zip Postal Code Printed in China
13. on dry indoor surfaces Do not use for any purpose other than described in this user s guide The use of an extension cord is not recommended Do not put any objects into openings Do not use with any opening blocked Keep free of dust lint hair and anything else that may reduce air flow Store your appliance indoors in a cool dry area Keep your work area well lit Do not immerse the vacuum into water or other liquids Keep end of hose wands and other openings away from your face and body SAVE THESE INSTRUCTIONS For Household Use Only WARNING To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install the proper outlet Do not modify the plug in any way Rev 05 02B PRECAUTIONARY MEASURES Important If the suction opening in the unit the hose or the extension tube are BLOCKED switch off the vacuum cleaner and remove the blocking substance before GETTING TO KNOW YOUR BAGLESS CYCLONIC UPRIGHT When pulling out the power plug from the wall outlet pull the plug not the power cord you start the unit again 5 1 Do not operate the vacuum cleaner to close to heaters radiators or cigarette butts QD 6 Do not pick up anything that is burning or smok
14. ws from the top of the motorized power head cover fig O Fig O Remove the cover of the motorized power head If the belt has broken remove any loose pieces before replacing Lift the agitator up as is in fig P below e Remove the belt by turning it sideways around the motor shaft and pull out fig Q OPERATING INSTRUCTIONS cont PROBLEM SOLVING Cleaning amp Changing the Belt cont Place one end of new belt over motor shaft and the other on the round pulley end of the beater bar Before re inserting the agitator assembly make sure that the end caps are on correctly fig R After checking the caps re install the agitator assembly into the housing grooves Turn the agitator by hand to make sure that the belt is not twisted and all rotating parts turn freely Replace the rear belt cover and screw firmly Caution The two end caps may come off along with the two washers as you lift the agitator unit out Do NOT lose the two small washers 13 Changing the Headlight Bulb Warning Always disconnect from power source when servicing or cleaning the unit Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting Turn unit Off and unplug from wall outlet Use a Phillips screwdriver and remove the four 4 screws from the top of the motorized power head cover See fig O on page 7 With the base cover removed insert bulb
Download Pdf Manuals
Related Search