Ryobi 105r, 132r, 137r Trimmer User Manual
Contents
1. 14 VI Troubleshooting 14 VII Notesi seun een na mee 15 VIII Warranty 16 Make sure this manual is carefully read and understood before starting or operating this equipment CONTENTS OF CARTON This carton includes the following 1 For completely assembled models Trimmer Operator s manual Owner s registration card 2 Forunassembled models hardware pack containing e D Handle and hardware String guard and screws Operator s manual e Owner s registration card SAFETY WARNINGS THE PURPOSE OF SAFETY SYMBOLS IS TO ATTRACT YOUR ATTENTION TO POSSIBLE DANGERS THE SAFETY SYMBOLS AND THE EXPLANATIONS WITH THEM DESERVE YOUR CAREFUL ATTENTION AND UNDERSTANDING THE SAFETY WARNINGS DO NOT BY THEMSELVES ELIMINATE ANY DANGER THE INSTRUCTIONS OR WARNINGS THEY GIVE ARE NOT SUBSTITUTES FOR PROPER ACCIDENT PREVENTION MEASURES SYMBOL MEANING SAFETY ALERT SYMBOL Indicates danger warning or caution May be used in conjunction with other symbols or pictographs NOTE Advises you of information or instructions vital to the operation or maintenance of the equipment DANGER Failure to obey a safety warning will result in serious injury to yourself or to others Always follow the safety precautions to reduce the risk of fire electric shock and personal injury WARNING Failure to obey a safety warning can result in serious injury to yourself or to other2. Installing the Lower Attachment Boom 1 Remove the hanger from the lower attachment boom Hold the release button down while pushing the lower attachment boom into the Click Link Fig 13 2 FOR BASIC TRIMMING OR USING OTHER RYOBI ATTACHMENTS Locate and lock the release button into the primary hole in the Click Link Fig 13 CAUTION Make sure the release button is locked in the primary hole and knob is securely tightened before operating this unit Click Link Primary Hole Release Lower Button Boom Fig 13 3 Tighten the knob securely clockwise before using the unit Fig 14 CAUTION All attachments are designed to be used in the primary hole unless otherwise indicated in the specific attachment s operator s manual If the incorrect hole is used it could result in injury or damage to the unit Trimming Head Trimming Edging Hole Head Edging Hole 180 Knob Washer Fig 14 OPERATING INSTRUCTIONS ADJUSTING THE TRIMMING LINE LENGTH Your trimmer is eguipped with a bump head which allows the operator to release more trimming line without stopping the motor As the line becomes frayed or worn additional line can be released by lightly tapping the trimming head on the ground Fig 15a Models 105r and 132r Fig 15b Model 137r while operating the trimmer at high speed NOTE Always keep the trimming line fully extended Line release becomes more difficult as cutting line becomes sho
3. CAUSE SEVERE INJURY WARNING Do not operate without guard in place Keep away from rotating cutter KEEP BYSTANDERS AWAY WARNING Keep all bystanders especially children and pets at least 30 feet 9 2 m away from the trimming area SHARP BLADE Sharp blade on guard Can cause injury Do not touch blade SPEED SWITCH OR THROTTLE SWITCH Indicates HIGH or FASTEST speed SPEED SWITCH OR THROTTLE SWITCH Indicates LOW or SLOWEST speed ASSEMBLY INSTRUCTIONS If the D Handle on your unit is not If the string guard on your unit is not assembled use the following instructions installed use the following instructions INSTALLING THE D HANDLE INSTALLING THE STRING GUARD 1 Push the D Handle down over the boom MODELS 105r AND 132r Fig 1 WARNING To avoid serious personal 2 Install the bolt washer and wing nut and A tighten Fig 2 injury never operate the trimmer without the string guard in place 1 Place the string guard onto the boom above the clamp assembly Fig 3 If the D Handle on your unit is assembled use the following instructions ADJUSTING THE D HANDLE 2 Push the string guard down to the top of the string head assembly and then rotate the 1 Loosen the wing nut It is not necessary to string guard to the proper position Fig 4 remove the wing nut washer and bolt 2 Rotate the D Handle 180 top of the boom to the correct operating positi
4. the gauge number the heavier the cord To reduce the possibility of disconnection of the unit cord from the cord set during operation see Fig 9 MINIMUM WIRE SIZE FOR EXTENSION CORDS FOR 120 VOLT APPLIANCES USING 0 6 AMPS i A nameplate on your unit indicates what voltage it uses Never connect the unit to an AC voltage that differs from this voltage Cord length ft Wire size AWG e Inspect all extension cords and the unit power connection periodically Look closely for deterioration cuts or cracks in the insulation Also inspect the connections for damage Repair or replace the cords if any defects appear e Avoid dangerous environments Never operate your unit in damp or wet conditions Moisture is a shock hazard e Do not use the unit in the rain Do not handle the plug or the unit with wet hands BEFORE OPERATING Read the instructions carefully Be familiar with the controls and proper use of the unit Children and adolescents must not manipulate units except for adolescents in training and under the supervision of a specialist Before each use check that the cutting head is correctly fixed and that the trigger returns automatically in neutral position Thoroughly inspect the trimmer for loose or damaged parts before each use Do not use until adjustments or repairs are made All guards and safety attachments must be installed properly before operating the unit Use the
5. you may also have other rights which vary from state to state This warranty applies to all RYOBI Products manufactured by RYOBI and sold in the United States and Canada To locate your nearest service dealer dial 1 800 345 8746 in the United States or 1 800 265 6778 in Canada RYOBI RYOBI OUTDOOR PRODUCTS 550 N 54th Street Chandler AZ 85226 U S A RYOBI CANADA INC 275 Industrial Rd Cambridge Ontario N1R 6K2 CANADA SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE FOR QUESTIONS CALL 1 800 345 8746 IN U S OR 1 800 265 6778 IN CANADA OPERATOR S MANUAL PART NO 181674 PRINTED IN U S A REV B 51449 10 98
6. 4 505 040 4 463 498 4 369 742 4 342 236 4 223 441 2 125 688 D 249 012 D 239 329 OTHER PATENTS PENDING SERVICE INFORMATION Service on this unit both within and after the warranty period should be performed only by an authorized and approved service dealer Dial 1 800 345 8746 in the United States and 1 800 265 6778 in Canada to obtain a listing of the authorized service dealer nearest you Do not return the unit to the retailer Safety Warnings 3 6 A Safety and International Symbols 6 ll Assembly Instructions 7 8 A Installing the D Handle 7 B Adjusting the D Handle 7 C Installing the String Guard Models 105r and 132r 7 D Installing the String Guard Model 137F iere renes 8 Ill Operating Instructions 8 10 A Connecting the cord 8 B Starting the timmer 8 C Holding the trimmer 8 D Operating two speed switch Models 132r and 137r 9 E Operating the Click Link System 9 F Adjusting the trimming line length 10 G Decorative trimming 10 IV Maintenance and Repair Instructions 11 14 A Line installation 11 B Winding the existing reel 11 C Cleaning the SpeedSpool 12 D Installing a prewound reel 18 E Cleaning the trimmer 14 V Specifications
7. IT IS NOT NECESSARY TO REMOVE THE BUMP KNOB MAINTENANCE AND REPAIR INSTRUCTIONS 2 Remove the Bump Knob foam seal spring 4 Clean the shaft and the inner surface of the inner reel and trimming line from the outer outer spool To clean the shaft underneath spool Fig 25 the plunger press down on the plunger Fig 27 Remove any dirt and or debris from the shaft Bump Knob Foam Seal Spring Assembly Inner Reel Fig 27 Fig 25 5 Install the inner reel spring foam seal and 3 Remove any debris or grass from the knob Bump Knob into the outer spool Fig 25 spring inner reel and foam seal Remove 6 Tighten the Bump Knob clockwise any existing line from the inner reel before cleaning Wash the inner reel with warm soapy water Fig 26 7 Install new line as described on pages 11 and 12 INSTALLING A PREWOUND REEL 1 Insert the ends of the two trimming lines into the eyelets in the outer spool Fig 28 then A grasp the ends and pull firmly to release the Inner Heal o line from the holding slots in the outer spool 2 Hold the inner reel in place and install the Bump Knob spring and foam seal in the counterclockwise direction Line installation Fig 26 is now complete NOTE The inner reel must be completely dry before reinstalling it into the outer spool Do not lubricate the inner reel or outer spool assembly 13 MAINTENANCE AND REPAIR INSTRUCTIONS CLEANIN
8. The use of gloves ear hearing protection and long pants are recommended SAFETY WARNINGS Do not wear loose fitting clothing or articles such as scarves strings chains ties etc because they could get caught in moving parts Also make sure long hair does not get caught in moving parts Long hair must be pulled back and secured off shoulders and neck Keep hands face and feet away from all moving parts Do not attempt to touch or stop the string when it is rotating Always hold the trimmer with both hands when operating Keep a firm grip on both the front and rear handles or grips Freguently inspect the condition of the cutting head All damaged parts must be replaced immediately Follow all the reguired precautions when undertaking replacement If you strike or become entangled with a foreign object stop the engine immediately and check for damage Repair any damage before further operation is attempted Do not operate the trimmer with loose or damaged parts Do not operate the unit faster than the speed necessary to cut trim or edge Do not run the unit at high speed when not cutting Do not force the unit It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed The string guard must be in place at all times while operating the trimmer Failure to use the string guard may cause the unit to overheat DO NOT OPERATE WITHOUT THE GUARD IN PLACE Do not extend
9. reduce the risk of electrical shock this unit has a polarized plug one blade is wider than the other and will require the use of a polarized extension cord This unit plug will fit into a polarized extension cord only one way If the plug does not fit fully into the extension cord reverse the plug If the plug still does not fit obtain a correct polarized extension cord A polarized extension cord will require the use of a polarized wall outlet This plug will fit into a polarized wall outlet only one way If the plug does not fit fully into the wall outlet reverse the plug If the plug still does not fit contact a qualified electrician to install the proper wall outlet Do not change the unit plug extension cord receptacle or extension cord plug in any way Ground Fault Circuit Interrupter GFCI protection should be provided on the circuit s or outlet s to be used for this unit Receptacles are available having built in GFCI protection and may be used for this measure of safety SAFETY WARNINGS e CORD SETS Make sure your cord set is in good condition When using a cord set be sure to use a cord that is heavy enough to carry the current that your unit will draw An undersized cord set will cause a drop in line voltage resulting in loss of power and overheating The table shows the correct size to use depending on the cord length and nameplate amperage rating If in doubt use the next heavier size line gauge The smaller
10. reel with new line Installing a prewound inner reel 2 Insert 10 feet 2 5 m for models with 080 THE CORRECT LINE TO USE in 2 03 mm of trimming line and 15 ft 4 5 m for models with 060 in 1 52 mm line WARNING Always use genuine into one of the two eyelets and push it up Monoflail replacement line Do not through the line loading hole in the inner reel use metal reinforced line Fig 18 Do not bend the line when inserting it into the eyelet It is very important to use the correct size line Line with a diameter of 0 60 in 1 52 mm must be used on Model 105r 0 080 in 2 03 mm for Models 132r and 137r The motor may overheat and fail if you use a larger line TO INSTALL NEW TRIMMING LINE IT IS NOT NECESSARY TO REMOVE THE BUMP KNOB Winding the existing inner reel with new line NOTE Before installing new trimming line onto the existing inner reel remove any old line from the SpeedSpool by pulling the line Line Loading Hole out of the line loading or locking holes See Figs 18 and 19 for location of holes Fig 18 1 Line up the arrow on the inner reel with the 3 Insert the line into the locking hole Fig 19 arrow on the outer spool Fig 17 no more than 1 2 inch 12 7 mm Do not push the line too far into the inner reel A TOP VIEW OF THE SPEEDSPOOL small loop is formed when the line is inserted correctly Fig 19 Fig 17 Locking Hole NOTE Do not wind the inner reel before the F
11. the owner RYOBI s responsibility in respect to claims is limited to making the required repairs or replacements and no claim of breach of warranty shall be cause for cancellation or rescission of the contract of sale of any RYOBI Product Proof of purchase will be required by the dealer to substantiate any warranty claim All warranty work must be performed by an authorized RYOBI service dealer This warranty is limited to ninety 90 days from the date of original retail purchase for any RYOBI Product that is used for rental or commercial purposes or any other income producing purpose This warranty does not cover any RYOBI Product that has been subject to misuse neglect negligence or accident or that has been operated in any way contrary to the operating instructions as specified in the RYOBI Operator s Manual This warranty does not apply to any damage to the RYOBI Product that is the result of improper maintenance or to any RYOBI Product that has been altered or modified so as to adversely affect the product s operation performance or durability or that has been altered or modified so as to change its intended use The warranty does not extend to repairs made necessary by normal wear or by the use of parts or accessories which are either incompatible with the RYOBI Product or adversely affect its operation performance or durability RYOBI reserves the right to change or improve the design of any RYOBI Product without assum
12. the trimming line beyond the length of the guard specified in this manual Do not operate trimmer without both trimming lines extended and the proper line installed Never use metal reinforced or monofilament line that is not specifically designed for use with your model Keep trimmer clean of vegetation and other materials e Always stop the unit when cutting is delayed or when walking from one cutting location to another All interventions whether for maintenance repair or for changing cutting head or safety attachments must be undertaken with the unit disconnected from the power supply Use only genuine replacement parts when servicing this trimmer These parts are available from your authorized dealer The use of non standard parts or other accessories or attachments not designed for this trimmer could result in serious injury to the user or damage to the trimmer and void your warranty OTHER SAFETY WARNINGS e Disconnect the unit from the power supply when not in use before servicing when changing accessories such as cutting head and the like Maintain trimmer with care Keep the unit clean and serviced for the best and safest performance Follow the maintenance instructions Always use a clean cloth when cleaning Never use strong detergents gasoline petroleum based products or any strong solvents to clean the unit Keep your unit in good working condition Follow instructions for servicing a
13. G THE TRIMMER WARNING To avoid serious personal injury always unplug your unit before you clean or perform any maintenance on it 1 Use a small brush or the air discharge of a vacuum cleaner brush to clean the fan blades 2 Keep the air vents free of obstructions 3 Do not use any strong detergents on the plastic housing or handle They can be damaged by certain household cleaners that contain aromatic oils such as pine and lemon and by solvents such as kerosene Moisture can also cause a shock hazard Wipe off any moisture with a soft cloth SPECIFICATIONS MOTOR Motor type Electric Operating RPM 7 000 7 800 rpm Ignition Switch Trigger Amperage 4 7 amps Model 105r 5 2 amps Model 132r 5 5 amps Model 137r DRIVE SHAFT AND CUTTING HEAD Drive Shaft 1 4 in 6 5 mm Shoulder Strap Optional Cutting Head Bump Line Releaser Cutting Path Diameter 15 in 381 mm Drive Shaft Housing Steel Tube Model 105r Steel Tube Click Link Models 132r and 137r Trimming Line Diameter 0 060 in 1 52 mm Model 105r 0 080 in 2 03 mm Models 132r and 137r TROUBLESHOOTING PROBLEM Motor Will Not Start Cutting Head Will Not Turn When Trigger is Squeezed Cutting Head Will Not Advance Line Inner reel bound up Cutting head dirty Indexing teeth worn or b
14. RYOBI 105r 132r amp 137r Electric Trimmers OPERATOR S MANUAL 4 D T fy o o ad 7 e gt N FOR QUESTIONS CALL 1 800 345 8746 in U S or 1 800 265 6778 in CANADA www ryobi com IMPORTANT MANUAL DO NOT THROW AWAY INTRODUCTION TABLE OF CONTENTS THANK YOU Thank you for purchasing this guality product This modern outdoor power tool is designed to provide many hours of useful service You will find it to be a great labor saving device This operator s manual provides you with easy to understand operating instructions Read the entire manual and follow all of the instructions to keep your new outdoor power tool in top operating condition The other manual that came with your power tool the parts manual contains all of the information that you need to order parts PRODUCT REFERENCES ILLUSTRATIONS AND SPECIFICATIONS All information illustrations and specifications in this manual are based on the latest product information available at the time of printing We reserve the right to make changes at any time without notice Copyright 1998 Ryobi Outdoor Products Inc All Rights Reserved Click Link is a registered trademark of Ryobi Outdoor Products Inc SpeedSpool is a registered trademark of Ryobi Outdoor Products Inc NOTE PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE THIS PRODUCT IS COVERED BY ONE OR MORE OF THE US PATENTS 5 076 149 4 779 405 4 651 422
15. ed in the SAFETY WARNINGS section OPERATING INSTRUCTIONS OPERATING THE TWO SPEED SWITCH MODELS 132r AND 137r ONLY This unit is eguipped with a two speed switch a powerful high speed for demanding yard work and a precision low speed for light duty yard work Push the switch up for high speed trimming Push the switch down for low speed trimming Fig 11 OPERATING THE CLICK LINK SYSTEM MODELS 132r AND 137r Models 132r and 137r are eguipped with a Click Link System which enables optional attachments to be installed on this unit The optional attachments are Sweeper Blower eese SB720r Vacuum LV720r dG Or diea engine edd LE720r Cultivator essere GC720r Straight Shaft Trimmer SS670r or SS725r Tree Pruner ete TP720r Snow Thrower sss ST720r Hedge Trimmer sss HS720r Blower Vacuum eene BV720r BloWet 2 eee tees TB720r Removing the Lower Attachment Boom NOTE To make removing the boom easier place the unit on the ground or on a table 1 Loosen the knob counterclockwise Fig 12 2 Push the release button in Fig 12 3 Pull the lower boom straight out of the Click Link Fig 13 Release Button Click Link Fig 12 If your unit is not assembled or you have more than one attachment use the following instructions Fig 11
16. ig 19 second line is installed into the reel 11 MAINTENANCE AND REPAIR INSTRUCTIONS 4 Pull the line away from the spool until the line is tight against the inner reel Fig 20 WA SX SS A TDI QS NS A Z f i N LAY oi fb Fig 20 5 Repeat the procedure with the second eyelet and use the same amount of line as specified in Step 2 6 Wind the inner reel counterclockwise until approximately four 4 inches of line remains outside of the eyelets in the outer spool Fig 21 7 If winding the line becomes difficult or the line jams pull the ends of the line away from the spool and continue winding the inner reel counterclockwise Fig 22 12 RELEASING THE INNER REEL If the speed spool does not operate correctly when bumping the head on the ground use the following instructions 1 Pull the ends of the line firmly away from the spool to release the inner reel Fig 23 If this procedure does not release the inner reel follow the Cleaning the SpeedSpool instructions below Ri teh QU e US NA ime Fig 23 CLEANING THE SPEEDSPOOL If the SpeedSpool becomes difficult to wind or does not operate correctly when bumping the head on the ground use the following instructions 1 If you need to remove the Bump Knob to clean the spool or remove jammed excess line hold the outer spool and unscrew the Bump Knob counterclockwise Fig 24 TO INSTALL NEW TRIMMING LINE
17. ing any obligation to modify any product previously manufactured ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO SA YEAR WARRANTY PERIOD OR NINETY E YS FOR PRODUCTS USED FOR ANY CO RCIAL PURPOSE ACCORDINGLY ANY SUCH IMPLIED WARRANTIES INCLUDING MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE TWO YEAR OR NINETY DAY WARRANTY PERIOD RYOBI S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND ROP DOES NOT ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY OTHER OBLIGATION SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU RYOBI ASSUMES NO RESPONSIBILITY FOR INCIDENTAL CONSEQUENTIAL OR OTHER DAMAGES INCLUDING BUT NOT LIMITED TO EXPENSE OF RETURNING THE RYOBI PRODUCT TO AN AUTHORIZED SERVICE DEALER AND EXPENSE OF DELIVERING IT BACK TO THE OWNER MECHANIC S TRAVEL TIME TELEPHONE OR TELEGRAM CHARGES RENTAL OF A LIKE PRODUCT DURING THE TIME WARRANTY SERVICE IS BEING PERFORMED TRAVEL LOSS OR DAMAGE TO PERSONAL PROPERTY LOSS OF REVENUE LOSS OF USE OF THE PRODUCT LOSS OF TIME OR INCONVENIENCE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU This warranty gives you specific legal rights and
18. nd changing accessories Inspect unit periodically and if damaged have it repaired by an authorized service facility Inspect extension cords periodically and replace if damaged Keep handles dry clean and free from oil and grease Store unit indoors When not in use appliances should be stored indoors in a dry and high or locked up place out of the reach of children Keep these instructions Refer to them frequently and use them to instruct other users If you loan someone this unit also loan them these instructions SAVE THESE INSTRUCTIONS SAFETY WARNINGS SAFETY AND INTERNATIONAL SYMBOLS This operator s manual describes safety and international symbols and pictographs that may appear on this product Read the operator s manual for complete safety assembly operating and maintenance and repair information SAFETY ALERT SYMBOL Indicates danger warning or caution May be used in conjunction with other symbols or pictographs READ OPERATOR S MANUAL Failure to follow operating instructions and safety precautions in operator s manual can result in serious injury Read operator s manual before starting or operating this unit FOR SERVICE INFORMATION CALL USA 1 800 345 8746 CANADA 1 800 265 6778 WEAR EYE AND HEARING PROTECTION WARNING Thrown objects and loud noise can cause severe eye injury and hearing loss Wear eye and hearing protection when operating this unit THROWN OBJECTS AND ROTATING CUTTER CAN
19. on 3 Position the D Handle as desired and tighten the wing nut Fig 2 Fig 4 3 Install the screws with a Phillips screwdriver Fig 5 ASSEMBLY INSTRUCTIONS If the string guard on your unit is not 2 Place the three hex nuts into the recessed installed use the following instructions holes on top of the guard Fig 7 INSTALLING THE STRING GUARD MODEL 137r injury never operate the trimmer without the string guard in place WARNING To avoid serious personal 1 Slide the string guard onto the guard mount above the string head assembly Align the Fig 7 screw holes in the string guard with the i screw holes in the string assembly Fig 6 3 Install the screws into the holes from the bottom of the guard Fig 8 Fig 6 OPERATING INSTRUCTIONS This trimmer has been designed and built to STARTING THE TRIMMER withstand normal use It will provide many hours of service provided the operating instructions Squeeze the trigger to start the trimmer ar closely followed STOPPING THE TRIMMER WARNING Always wear eye hearing Release the trigger to stop the trimmer foot and body protection to reduce the risk of injury when operating this unit HOLDING THE TRIMMER CONNECTING THE CORD eo unit hold the trimmer as shown 1 Use the cord hook when you connect the extension cord to the power cord to prevent disconnection Fig 9 Use only an outdoor approved extension cord as specifi
20. rter Fig 15b Each time the head is bumped approximately 1 in 25 4 mm of trimming line is released A blade in the string guard will cut the line if excess line is released For best results tap the head on bare ground or hard soil If line release is attempted in tall grass the motor may overheat Always keep the trimming line fully extended Line release becomes more difficult as the cutting line becomes shorter 10 WARNING Do not remove or alter the lead cutting blade assembly Excessive line length will cause the motor to overheat and may result in serious personal injury DECORATIVE TRIMMING Decorative trimming is accomplished by removing all vegetation around trees posts fences etc Use a 30 degree angle when trimming with this method Fig 16a Models 105r and 132r Fig 16b Model 137r Fig 16b EDGING MODELS 132r AND 137r For edging with the trimming head attachment on Models 132r and 137r locate and lock the release button into the second hole 90 degrees or third hole 180 degrees in the Click Link System Fig 14 MAINTENANCE AND REPAIR INSTRUCTIONS LINE INSTALLATION FOR THE WARNING Always use the correct SPEEDSPOOL line length when installing trimming line on the unit If longer line is used than specified in this manual the line may not release properly The trimming line in the speed spool may be replaced by two different methods Winding the existing inner
21. s Always follow the safety precautions to reduce the risk of fire electric shock and personal injury CAUTION Failure to obey a safety warning may result in property damage or personal injury to yourself or to others Always follow the safety precautions to reduce the risk of fire electric shock and personal injury e IMPORTANT SAFETY INFORMATION WARNING When using electric gardening appliances basic safety precautions should always be followed to reduce the risk of fire electric shock and personal injury Carefully read and understand the entire Operator s Manual before using your trimmer Pay close attention to the Operating Instructions and Safety Warnings READ ALL INSTRUCTIONS ELECTRICAL SAFETY WARNINGS This tool is double insulated Use only identical replacement parts when servicing Repair or replace damaged cords WARNING To reduce the risk of electrical shock use only extension cords approved for outdoor use such as an extension cord of cord type SW A SOW A STW A STOW A SJW A SJOW A SJTW W or SJTOW A A 2 wire extension cord an extension cord without a ground may be used because the tool is double insulated However a 3 wire extension cord an extension cord with a ground that uses a NEMA type connector parallel blade U ground may also be used Extension cords are available from your local retailer Use only round jacketed extension cords approved for outdoor use e To
22. unit only in daylight or good artificial light Keep all bystanders especially children and pets at least 30 feet 9 2 m away from the unit during operation Before starting adjust the handle to your size and make sure that the cutting head is not in contact with anything e Be aware of the risk of injury to the head hands and feet e Carefully inspect the areas to be cut Remove all debris that could become entangled in the string or blade Also remove any objects that could be thrown during cutting WHILE OPERATING Use the right tool Do not use this trimmer for any job except that for which it is intended Avoid accidental starting Do not carry plugged in unit with your finger on the switch Be sure switch is off when plugging in Do not abuse the power cord Never carry the unit by the cord or yank the plug out of the receptacle Keep the cord away from heat oil and sharp edges Always remain alert To prevent injury to yourself and others do not operate this trimmer if you are fatigued Do not operate the unit while under the influence of drugs alcohol or medication Wear safety glasses or goggles at all times when operating this trimmer Use a face mask or dust mask if operation is dusty Do not overreach Keep proper footing and balance at all times Dress properly Do not operate this trimmer when barefoot or wearing open sandals Always wear sturdy rubber soled footwear
23. urred Line welded Line twisted when refilled Not enough line exposed 14 CAUSE REMEDY Motor stops unit unplugged Check cord to see if it is plugged into an electrical outlet Cutting head bound with grass Stop motor and clean cutting or debris head Cutting head out of line Refill with genuine replacement cutting line Replace inner reel Clean cutting head reel spool Replace reel and spool Disassemble remove the welded section and rewind the line Disassemble cutting head and rewind the inner reel Push the Bump Knob and pull out the line until a minimum of 4 in 102 mm is outside of cutting head NOTES LIMITED TWO YEAR WARRANTY RYOBI OUTDOOR PRODUCTS warrants each new RYOBI Product for two 2 years according to the following terms This warranty extends to the original retail purchaser only and commences on the date of original retail purchase Any part of the RYOBI Product manufactured or supplied by RYOBI and found in the reasonable judgement of RYOBI to be defective in material or workmanship will be repaired or replaced by an authorized RYOBI service dealer without charge for parts and labor The RYOBI Product including any defective part must be returned to an authorized service dealer within the warranty period The expense of delivering the RYOBI Product to the dealer for warranty work and the expense of returning it back to the owner after repair or replacement will be paid for by
Download Pdf Manuals
Related Search