Russound ST2-XM Stereo System User Manual
Contents
1. 26 Update TIME e RERO 26 Factory Initialization 1 1 1 27 28 Tuner Setup Menu 29 29 TORRE 30 C ntroller ID 30 DENO SCENES 30 Factory MILIGIPZ AVION 30 31 Tuner Setup Menu for mem emen nnne nnn 31 31 Bank 32 32 Backup and Restore 33 Programming Tor mi me rar da ra cie Yd a cd Yd ve a rk Ya Ye wr ea 34 Technical Specifications 0 4 4 6 35 Warranty amp Repair nnn nnn nnns 36 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2 XM Smart Tuner Whether you are adding radio to an existing system expanding Series system or taking advantage of the CAV6 6 s robust RNET communication link the ST2 XM Tuner is designed to meet your needs The ST2 XM Tuner is like having two radios in one The AM FM tuner provides broadcast of local AM FM stations and the XM tuner delivers all the diversity and choices available to XM radio subscribers The two modules share one set of controls and display on the front of the unit but each runs independently This arran2. Mews Within each category is a series of channels e g Top Tracks Bluegrass ington XM OR selection in this mode is refined to scrolling only those channels in the selected category Next Category This button press accesses the next category from the current category Previous Category This button press accesses the previous category from the current category Category Channel Up This button press accesses the next channel up within the selected category Category Channel Down This button press accesses the next channel down within the selected category STZRC 1572 080527 UNOIRCI 5 5 o o D 9 990 e 9 9 DeO O geo o 9 0 2 17 18 ST2 XM OPERATION XM RADIO MODES Now Playing Mode 2 PLR vHG This mode displays information about the current XM selection Appropriate button presses access the next or previous information item MAME Displays the artist s name feature name or program name news talk sports TITLE Displays the song title or program title CHTEG ORV Displays the current category ST2 XM ST2 RC ST2 KP UNO LRC1 Next Info Item gt Ca Previous Info Item ac Display Preference Mode 3 DSPL PREF This mode allows you to choose how XM channel information will be displayed on the keypad and tune
3. 1 Power WARNING BEFORE TURNING ON THE POWER FOR THE FIRST TIME READ THE FOLLOWING SECTION CAREFULLY 2 Do Not Touch The ST2 With Wet Hands Do not handle the ST2 or power cord when your hands are wet or damp If water or any other liq uid enters the ST2 cabinet unplug the unit from power immediately and take the ST2 to a qualified service person for inspection 3 Location of ST2 Place the ST2 in a well ventilated location Take spe care to provide plenty of ventilation on all sides of the ST2 especial ly when it is placed in an audio rack If ventilation is blocked the ST2 may overheat and malfunction Do not expose the ST2 to direct sun light or heating units as the ST2 internal components temperature may rise and shorten the life of the components Avoid damp and dusty places 4 Care From time to time you should wipe off the front and side panels of the cabinet with a soft cloth Do not use rough material thinners alcohol or other chemical solvents or cloths since this may damage the finish or remove the panel lettering This device complies with Part 15B of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by Russound could void the user s authority to operate this equip me
4. TUNE SELECT Used for direct station or chan nel selection numeric input E TUNE UP DOWN Incrementally scrolls through 5 station or channel numbers FAV 1 FAV 2 Sets Selects Favorite 1 or 2 6 preset selection on ST2 XM tuner Ell SEEK UP DOWN AM FM Seeks the next tuned station up down XM Scrolls through banks 1 6 E LOCAL DISTANCE AM FM Optimizes station reception 15 14 13 12 8 AM FM Confirms direct entries XM Operating mode toggle STEREO MONO AM FM Selects stereo or mono broadcast XM Exit current XM operating mode TUNE UP DOWN Scrolls through station or channel numbers MEM UP DOWN Scrolls through preset sta tions within selected bank 14 AM FM Selects or FM band FE MEM SELECT Used for direct memory select numeric input 1 6 11 10 R RuUssound ST2 XM SETUP AND CONNECTIONS Power To power the tuner connect the 12VDC external power supply by inserting the power supply jack into the power supply connection on the tuner s rear panel Audio Output Connect one end of a dual RCA audio cable to the Tuner 1 Audio Output connection Keep prop er channel identity Attach the other end of the RCA cables to the source input of the audio con trol system Repeat the same procedure for the Tuner 2 Audio Output IR Connections The ST2 XM Tuner can be controlled by infrared commands received through the two IR connec tions on
5. pressed these buttons will be backlit green for Tuner 1 XM and amber for Tuner 2 AM FM Each time a tuner is selected the display will refresh with the cur rent station or preset for that tuner and all subse quent button presses and memory preset entries will be associated with that selected tuner Selecting the desired band AM FM only Push to switch between AM and FM reception Selecting the desired frequency or channel Use and for manual tuning To move quickly through the stations or channels press and hold either of the Tune buttons for more than 1 5 seconds To directly select a station or channel press Cu and enter the two or three digit XM channel number or the three or four digit station frequency 1071 for 107 1 etc European regions use five digit station frequencies Selecting a mode XM Push to select an XM operating mode Exiting a mode XM Push to exit the XM operating mode selection menu Frequency Seek AM FM only The SEEK function is performed by pressing and releasing a to seek lower frequencies or gt for higher frequencies SEEK tuning begins at the current frequency seeks upward and stops at the next tuned station Pushing gt continues the SEEK function Once the highest frequency is reached the tuner con tinues in SEEK mode at the lowest frequency Selecting Stereo or Mono Output AM FM only Press to toggle between stereo and mono mode STEREO or MONO appears briefl
6. 2 RIRussound amp ST2 SMART TUNER 9 9 id Es POWER 13 12 11 1 MAIN POWER SWITCH Turns power and off POWER ON OFF LED Indicates power on or off REMOVABLE COVER LENS Covers the selection buttons on the tuner EN BANK SELECT BUTTON Selects bank 1 6 5 MEMORY SELECT BUTTONS Sets and selects memory presets 1 6 for each bank 6 IR RECEIVER Receives IR signal from remote control LCD PANEL 12 character backlit display shows station channel custom names etc 8 and AM FM Backlit tuner selection indicator 9 TNR SEL Selects Tuner 1 XM or Tuner 2 AM FM and accesses tuner setup menus EQ AM FM Selects AM or FM band XM Selects an XM Mode Category Search Now Playing Display Preferences ALL Enters menu selections when programming EH ST MONO AM FM Selects stereo or mono mode for AM FM and Distant Local reception XM Press to Exit current XM Mode hold for signal strength 12 MEM PRESET UP DOWN Selects memory presets starting with last preset and toggles through menu features C9 TUNE UP DOWN AM FM Manually selects radio stations XM Manually selects channels Channel Up Channel Down ALL Toggles through menu settings amp COMPONENT GUIDE ST2 XM REAR PANEL Ol 7 E H EM COAX ANTENNA 2O 75Q GND SAT
7. ST2 Tuner also has an RS 232 port to sup port fully bi directional integration into whole house control systems such as Crestron9 and AMX FEATURES AM FM Tuner e XM satellite radio Compact single rack unit chassis e Six banks of six memory presets each per tuner 72 total presets for storing AM FM Station settings or XM channels Custom names for presets and banks Two Favorite presets per tuner Stereo or mono mode Local or distant mode Dedicated IR remote control Individual IR direct inputs for each tuner Front panel IR receiver Supports two ST2 KP optional tuner keypads RNET connections send tuner frequency and control information to UNO keypad display RS 232 control and programming User settings can be backed up and restored INSTALLATION APPLICATIONS RNET enabled System When the ST2 XM Tuner is used with an RNET enabled device such as the CAV6 6 and Is con nected to it through the Link In or Link Out port the tuner will be controlled by the CAV6 6 through the UNO S2 keypad Through RNET tuner information such as Tuner 1 or 2 station frequency or channel preset names and band or XM is displayed on UNO S2 keypads An additional RNET device can be connected to an existing ST2 by using the Link Out of the first unit into the Link In of the second unit Before using the ST2 XM tuner with the CAV6 6 you must assign source numbers to Tuner 1 and 2 in the ST2 Setup Menu AND complete
8. are automatically assigned and will operate as shown in the preceding UNO S2 keypad and UNO LRC1 remote diagrams TECHNICAL SPECIFICATION ST2 XM Smart Tuner Dimensions 17 W x 8D x 1 8 H 43 x 20 3 x 4 4 cm Weight 7 Ibs 3 2kg Power Supply 12VDC 1 5A Frequency Range FM Antenna impedance AM 530 1710 kHz FM 87 7 107 9 MHz 5 ohm unbalanced Impedance 300 ohm balanced AM Sensitivity 2 S N 20dB 55 dBu Image rejection 33dB S N ratio 45 dB FM sensitivity S N 30 dB 6dB max 12 dBu Image rejection 80 dB S N ratio 60 dB XM Band 2332 5 2345 MHz XM Antenna 50 ohm SMB connection It is prohibited to copy decompile disassemble reverse engineer or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system Furthermore the AMBE voice compression software included in this product 15 protected by intellectual property rights including patent rights copyrights and trade secrets of Digital Voice Systems Inc The user of this or any other software contained in an XM radio 15 explicitly prohibited from attempting to copy decompile reverse engineer or disassemble the object code or in any way convert the object code into human readable form The software 15 licensed solely for use within this product 35 36 WARRANTY amp REPAIR The Russound ST2 XM is fully guaranteed against all defects in materials and workmanship for two 2 years from the dat
9. button 2 SETUP appears Press Up Down until SOURCE NUM appears on the tuner 3 Press BAND TUNER appears 4 Press the Tune Up Down buttons to select the Tuner amp Tuner 1 is XM Tuner 2 is AM FM 5 Press BAND SOURCE NUM appears 6 Press the Tune Up Down buttons to scroll 1 Enter the Setup Menu by pressing and holding through the source numbers 1 6 7 Press BAND to select the source number as assigned in the CAV6 6 setup process 8 Repeat the process for the next tuner the TNR SEL button 2 TUNER SETUP appears Press MEM Up Down until UPDATE FIRMW appears on the tuner 3 Press BAND to enter the UPDATE FIRMW menu ST2 XM TUNER PROGRAMMING Press and Hold TNR SEL button ST2 TUNER SETUP MENU ST2 Chassis Setup Procedures TUNER SOURCE UPDATE FACTORY SYSTEM Chassis SETUP Q NUM FIRMW Q INIT INFO Setup Menu Procedure Procedure Procedure Procedure Menu 4 BAND HOLD BAND G TUNER 9 After update PAND cycle Power SOURCE NUM Start Update 9 BAND Cycle Power 4 Hold BAND appears on the tuner 5 While pressing and holding BAND After update cycle power appears on the tuner display 6 When Start Update appears on the tuner dis play start the update program Finished appears on the computer screen when complete 7 Cycle power to the tuner Factory Initialization Chassis The Factory Initialization procedu
10. the CAV6 6 s Source Setup procedure to identify the tuner as a Peripheral device and assign Source Numbers The CAV6 6 requires firmware version 2 00 01 or higher to control each tuner through RNET The UNO S2 keypad requires firmware version 3 00 01 or higher IR controlled System Series The ST2 XM Tuner can be controlled by infrared commands received through either of the two IR connections on the rear panel There are two unique IR code sets for Tuner 1 and Tuner 2 which allow each to be controlled independently from either IR connection These codes can be learned from the ST2 RC remote control into the CALRC1 remote control and or the DSC and DAN IR learning keypads The ST2 XM contains two individual tuners which makes it act as two sources in system There are two source audio outputs and two IR connections one for each tuner in the ST2 XM You will need at least one IR link cable Russound P N 09 0508 for these connections one is supplied with each CAi system If you are using an IR controlled system from another manufacturer installation should be similar The ST2 XM IR codes may be learned into many other manufacturers remote controls that have learning capability for unified control over the A V equipment 05 System The ST2 XM Tuner can be used in an A BUS sys INTRODUCTION tem with an audio distribution hub such as the 484 and keypads such as the A KP2
11. the top of the Factory Init menu A Yes begins the initialization 7 Please wait appears on the tuner during the process and Cycle Power appears when com plete 8 Cycle power on the ST2 XM tuner System Info XM The System Info menu shows the ST2 Tuner s manufacturing build properties 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 SETUP appears Press Up Down until SYSTEM INFO appears on the tuner Press BAND Press BAND at Build Time to view Press MEM Up Down to advance Press BAND at Build Date to view Press MEM Up Down to advance Press BAND at Version to view Press TNR SEL to exit the System Info menu Press SEL button to select XM Tuner ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU END OF XM TUNER SETUP Tuner Setup Menu for AM FM It is important to select the desired tuner Tuner 2 for AM FM using the TNR SEL button BEFORE accessing the Tuner Setup Menus Memory Name memory preset must be created and saved before it can be named see page 19 Once it is saved the preset s Tuner Bank and Memory must be entered in the following procedure continued XM Setup Menu Controller Diagnostics Factory Initialization and System Info Procedures Chassis BUILD TIME BUILD DATE re Q S Or INO VERSION Please Wait Cycle Pow o 31
12. AND to access the Bank Name entry screen 9 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 10 Press BAND when bank name is entered 11 SAVE CHANGES will appear 12 Press Tune Up Down to select Yes or No 13 Press BAND to save bank name The Bank Name menu returns to the Bank prompt to name other banks or press TNR SEL to exit the Bank Name menu Region AM FM The Region procedure assigns either US or Euro to the tuner The difference between the two Is that US FM frequencies operate in 2 MHz incre ments while European FM frequencies operate in 05 MHz increments 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND 3 MEMORY NAME appears Press MEM Up Down until REGION appears on the tuner 4 Press BAND 5 Press the Tune Up Down buttons to select either US or EURO 6 Press BAND to select Press TNR SEL to exit the REGION menu END OF AM FM TUNER SETUP ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU Backup and Restore The backup and restore PC application RNET Once all of the tuner settings are completed it Backup is available through the Document may be advisable to create a backup of the pro gt Center at www russound com Also required are grammed settings for future use The backup will
13. ANTENNA CONNECTIONS XM Antenna Connect the included XM antenna for XM recep tion to the back panel of the XM module The antenna comes with 20 feet of cable If this length is not sufficient there are aftermarket antenna kits available for custom lengths Position the antenna near a south facing window to receive the best signal from a satellite or ter restrial signal The antenna may also be attached to an exter nal wall by sliding the slots on the back of the antenna onto four screws mounted on an exteri or wall Establish the best receiving position for the antenna before attaching it to the wall FM antenna XM Signal Strength Mode To test the XM reception turn the unit on When the XM radio is powered for the first time the XM service will start playing XM Channel 1 a preview promotional channel Verify that Channel 1 is playing by pressing the Tune Up Tune Down buttons Enter Signal Strength Mode by pressing and holding the ST MONO button on the ST2 XM front panel The display shows one of the follow Ing GOOG 5 signal strength good Signal strength marginal Signal strength poor Loss of ide Adjust the antenna until amp SI 15 dis played Press ST MONO tc to ext t Signal strength Mode Long wire antenna Outdoor antenna x O z ii L N 75 ohm to 300 ohm mami balun 75 ohm coax Connecting an Indo
14. D BANK NAME appears again 8 Press BAND to access the Bank Name entry screen 9 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 10 Press BAND when bank name is entered 11 SAVE CHANGES will appear 12 Press Tune Up Down to select Yes or No 13 Press BAND to save bank name The Bank Name menu returns to the Bank prompt to name other banks or press TNR SEL to exit the Bank Name menu Controller ID XM The Controller ID procedure is used to identify the controller s that the XM tuner will respond to Note For the XM module that 15 installed in the ST2 XM chassis All Controllers will be the default setting Diagnostics XM The Diagnostics procedure 15 for factory use only Factory Initialization XM The Factory Initialization procedure allows the erasure of all programmed settings of the XM tuner and returns them to the factory default set tings 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND 3 MEMORY NAME appears Press MEM Up Down until FACTORY INIT appears on the tuner 4 Press BAND to enter the FACTORY INIT menu 5 Are you sure appears on the tuner Using Tune Up Down buttons view the Yes and No selections 6 Press BAND to select A No selection returns to
15. ELLITE d s OJITPUT R Co TUNER 2 AM FM TUNER 1 XM RNET LINK IN LINK OUT Links to other Russound components that are RNET compatible dis plays frequency and other information on the UNO keypads RS 232 INTERFACE The RS 232 Interface allows the tuner to be controlled by PC or other devices that have an RS 232 Interface The RS 232 Interface also allows for firmware updates and program ming DB9 Cable KEYPAD PORTS RJ 45 Keypad ports for ST2 KP tuner keypads in dedicated non RNET sys tems Do not connect UNO keypads to these ports FM COAX FM Antenna threaded F connection 75 ohms for Tuner 2 LOOP ANTENNA AM antenna connection 300 ohms for Tuner 2 IR INPUT IR control input common IR control for Tuner 2 or Tuner 1 AUDIO OUTPUT Line level audio signal outputs RCA Cable for Tuner 2 XM ANTENNA XM Antenna SMB connection 50 ohms for Tuner 1 IR INPUT IR control input common IR control for Tuner 1 or Tuner 2 AUDIO OUTPUT Line level audio signal outputs RCA Cable for Tuner 1 POWER SUPPLY 12VDC external power supply connection COMPONENT GUIDE ST2 RC REMOTE CONTROL EN POWER Puts the tuner in out of standby mode 1 TUNER CONTROL Select TUNER 1 XM or TUNER 2 AM FM and all subsequent button presses affect that tuner NUMERIC INPUT Number buttons for direct selection of station channel bank preset Ell BANK SELECT Used for direct bank selection 3 numeric input 1 6
16. ERATION UNO LRC1 REMOTE CONTROL WITH CAV6 6 UNO LRC1 Remote Control Operation Turning the unit on The tuner is power managed by the CAV6 6 or other RNET enabled controller If the tuner is in standby mode any button press of the UNO LRC1 will bring the tuner out of standby mode when used with the UNO keypad Selecting the desired tuner To select a tuner push and choose the source number preassigned to Tuner 1 XM or Tuner 2 or use the UNO numeric source inputs at the bottom of the UNO LRC1 Selecting the desired band AM FM only Push gt to toggle between AM FM reception Selecting a Mode XM Push or to toggle between XM operating modes Exiting a Mode XM Press Ge or to exit XM operating mode menu Signal Strength mode XM Press and hold release display shows the signal strength rating To exit press Selecting desired frequency or channel Use the Channel 3 22 and NV for manual tuning move quickly through the channels press and hold the button for more than 1 5 seconds To directly select a station or channel enter the three or four digit channel or frequency 1071 for 107 1 etc European regions use five digit station frequencies Frequency Seek AM FM only The SEEK function is performed by pressing and releasing the Select q or gt or To seek higher frequency station press D gt Press lt for lower frequen
17. ND OF ST2 CHASSIS SETUP Press TNR SEL XM Setup Menu button to select XM Tuner Memory Name Procedure TUNER SOURCE UPDATE FACTORY SYSTEM Chassis SETUP NUM FIRMW INIT INFO Setup Menu Procedure Procedure Procedure Procedure Menu BAND ey MEM BANK CONTROLLR DIAGNOSTICS FACTORY SYSTEM XM NAME Q NAME Q ID Q Procedure Q INIT Q INFO Setup Procedure Procedure Procedure Procedure Procedure Menu BAND SAVE CHANGES BAND Selects character position Repeat for each character in name Tuner Setup Menu for It is important to select the desired tuner Tuner 1 for XM using the TNR SEL button BEFORE accessing the Tuner Setup Menus Memory Name XM memory preset must be created and saved before it can be named see page 19 Once it is saved the preset s Tuner Bank and Memory must be entered in the following procedure ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND again 3 MEMORY NAME appears on the tuner 4 Press BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press BAND to advance Memory appears 8 Press the Tune Up Down buttons to select a Memory continued Press TNR SEL XM Setup Menu button to select XM Tuner Bank Name Procedure TUNER SOURCE UPDATE FACTORY SYSTEM Chassis SETUP 4 NUM Q FIRMW INIT INFO Setup Menu Procedure Procedu
18. ST2 XIM Smart Tuner RIRussound ST2 SMART TUNER XM Instruction Manual XM radio service requires a monthly subscription from XM Satellite Radio w To subscribe contact w XM on the web at SATELLITE www xmradio com RADIO or by phone 800 852 9696 RIRussound IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte nance servicing instructions in the literature accompanying the appliance If you have any questions please call Russound Inc at 1 800 638 8055 or 603 659 5170 Safety Instructions 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future r
19. ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU Memory Name continued 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND again 3 MEMORY NAME appears on the tuner 4 Press BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press BAND to advance 8 Press the Tune Up Down buttons to select a Memory 9 Press BAND to advance MEMORY NAME appears again 10 Press BAND to access the Memory Name entry screen 11 Press Tune Up Down to select a character and MEM Up Down to change a character posi tion Up to 12 characters can be entered one by one A blinking cursor indicates the placement of the character being entered 12 Press BAND when memory name is entered 13 SAVE CHANGES will appear 14 Press Tune Up Down to select Yes or No 15 Press BAND to save memory name The Memory Name menu returns to the Memory prompt to name other presets or press TNR SEL to return to the Memory Name menu start Bank Name AM FM A custom name can be assigned to each of the six banks of Tuner 2 AM FM 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND 3 MEMORY NAME appears Press MEM Up Down until BANK NAME appears on the tuner 4 Press BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press BAND BANK NAME appears again 8 Press B
20. The connections on the rear panel are designed to receive IR signals from a repeating system commonly used in A BUS distributed audio systems For A BUS applications as with the series installation the two tuners in the ST2 XM unit must be set up as two sources with two source audio inputs and two IR connections You will need two IR link cables for these connections The two IR code sets can be learned from the ST2 RC remote into the RC1 remote control Note Optional ST2 KP keypads can be used to provide control for the ST2 XM Tuner and are designed to be used with IR controlled systems RS 232 Controlled System The ST2 XM Tuner can be controlled using the RNET protocol provided via the RS 232 port on the rear panel It can also be controlled by any RS 232 enabled control system e g Crestron AMX Information on RS 232 operation is avail able to dealers on the Russound web site www russound com BOX CONTENTS The ST2 XM Tuner comes with the parts needed to setup and operate the component These include 12 Tuner AM FM module XM module e ST2 RC remote control 12VDC power supply AM loop antenna 1 FM antenna 1 XM antenna 1 RCA audio cable 2 Rack mount ears Please call Russound at 800 638 8055 ext 501 for assistance parts are missing COMPONENT GUIDE ST2 XM FRONT PANEL ST2 SMART TUNER Ol oO X coo
21. a 089 male to female cable and laptop or desk then be available in case tuner settings need to top PC be restored Press TNR SEL button to select AM FM Tuner AM FM Setup Menu TUNER SOURCE UPDATE FACTORY SYSTEM Chassis SETUP NUM FIRMW INIT INFO Setup Menu Procedure Procedure Procedure Procedure Menu 9 REGION AM FM NAME Q NAME Q Procedure Setup 4 24 2 E 26 MEMORY BANK MEMORY NAME 5 the Selects character BAND UJ gt 2 G gt Z 5 BAND e 9 2 9 Selects character Selects character position Repeat Selects for each character character position in name Repeat for each character Q NO in name SAVE CHANGES BAND e 33 34 ST2 XM TUNER PROGRAMMING PROGRAMMING FOR CAV6 6 USE NOTE CAV6 6 firmware must be version 2 00 01 or higher UNO S2 firmware must be version 3 00 01 or higher to control the ST2 XM Tuner Use the System Info Menu of the CAV6 6 to check the firmware version If the firmware is not the proper revision as noted here visit the Document Center at www russound com to obtain the latest version To Program the CAV6 6 to operate with the ST2 XM Tuner refer to the CAV6 6 Instruction Manual for details 1 Enter the Setup Menu by pressing the Setup button on the side of the UNO S2 keypad 2 SOURCE SETUP will appear Enter the Source Setup Menu by pressing the Pla
22. ategory Search Now Playing and Display Preferences Exit Current Mode This button press returns the XM tuner to Preset default mode Signal Strength This button press and hold accesses the Signal Strength mode Depending on the signal the follow Li will be displayed Signal strength good Signal strength marginal Signal strength poor Loss of signal the appropriate button again to exit Signal Strength Mode 15 ST2 XM OPERATION XM RADIO MODES Preset default Mode This is the normal operating mode of the XM tuner In this mode the XM tuner operates similarly to the AM FM tuner for channel up and down bank selection and memory presets Next Preset This button press accesses the next saved preset 6 presets for each bank in the chosen bank Previous Preset This button press accesses the previous saved preset in the chosen bank Next Bank This button press accesses the next bank total of 6 banks Previous Bank This button press accesses the previous bank Channel Up This button press accesses the next active channel up from the current channel Channel Down This button press accesses the next active channel down from the current channel ST2RC STZXP UNOS2 S Hold Next Preset O Previous Preset e oO Previous Bank RC 9 gt cuo ST2 XM OPERATION XM RADIO MODES Category Search Mode 1 CAT XM Radio is organized by Channel Category e g Hack
23. cies Tuning begins at the current fre quency seeks upward or downward and stops at the next tuned station Pushing gt or Ca again con tinues the SEEK function Once the highest frequency is reached the tuner continues SEEK mode at the lowest frequency Frequency Scan AM FM only To scan press and hold then release tuner scans through tuned stations with a 5 second preview before moving to the next station To end scanning press Cn again Selecting a Bank To select a bank press and hold Cr for bank up or C for bank down Recalling a Memory Preset Press gt and Cr or lt gt to scroll through a loop of all the memory presets for the cur rently selected bank Only configured presets will be displayed Mute Press the Ca button to mute unmute the tuner audio output 13 12 UNO SELECTION UNO must be selected source for control of the CAV6 6 and any connected compo nents Select UNO before sending UNO LRC1 remote commands q D gt 220 CAL SOURCE CONTROL ST2 XM OPERATION UNO LRC1 REMOTE CONTROL WITH CAV6 6 EN POWER Power managed by CAV6 6 NUMERIC INPUT Number buttons for direct input of frequency channel preset bank TUNE UP DOWN Incrementally scrolls through channels or tuned stations EXIT Exit XM operating mode Ell TUNE UP DOWN Incrementally scrolls through channels or tuned statio
24. e of purchase During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor For this warranty to apply the unit must be installed and used according to its written instructions If service is necessary it must be performed by Russound The unit must be returned to Russound at the owner s expense and with prior written permission Accidental damage and shipping damage are not considered defects nor is damage resulting from abuse or from servicing by an agency or per son not specifically authorized in writing by Russound This Warranty does not cover Damage caused by abuse accident misuse negligence or improper installation or operation Power surges and lightning strikes Normal wear and maintenance Products that have been altered or modified Any product whose identifying number decal serial number etc has been altered defaced or removed Russound sells products only through authorized Dealers and Distributors to ensure that customers obtain proper support and service Any Russound product purchased from an unauthorized dealer or other source including retailers mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product Damage to or destruction
25. eference 3 Heed Warnings All warnings on the appliance in the operating instruc tions should be adhered to 4 Follow Instructions All operating and user instructions should be fol lowed 5 Water and Moisture The appliance should not be used near water for example near a bathtub washbowl kitchen sink laundry tub in a wet basement or near a swimming pool 6 Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive lt force and uneven surfaces may cause the appliance JAN WU 5 4 and cart combination to overturn 7 Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer 8 Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installa tion such as a bookcase or cabinet that may impede the flow of air through the ventilation openings 9 Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 10 Power Sources The appliance should be connected to a power supply
26. f the cable Be sure to use the keypad ports for the ST2 KP and NOT the RNET link ports The ST2 XM tuner supports up to two ST2 KP keypads An SA ZX3 Keypad Splitter can be used to add additional keypads Note ST2 KP keypads are designed for use with IR controlled systems non RNET systems When the ST2 XM Tuner is a component of an RNET system such as CAV6 6 the RNET system keypads are used Rack Mount Installation The ST2 XM can be mounted in a standard com ponent rack using the rack ears provided Line the rack ear s two rows of screw holes with the three screw holes on the side of the tuner Use the screws provided to secure the rack ears onto the unit on both sides The ST2 XM tuner should not be installed above a high heat pro ducing component such as a power amplifier ST2 XM SETUP AND CONNECTIONS ST2 KP AND CAV6 6 CONNECTIONS 10 RJ 45 CAT 5 Wiring Scheme ST2 Tuner Back Panel Connection shown flat side on top push clip on the bottom J HRussound ST2 Smart Tuner NEWMARKET NH 0 5 RNET LINK RS 232 KEYPAD PORTS INTERFACE 2 ES OUT DESIGNED IN USA MADE IN KOREA BLUE BLUE WHITE ORANGE GREEN WHITE lt GREEN ORANGE WHITE BROWN WHITE BROWN CAT 5 Cable 2 o ST2 KPBack O 9 O ST2 KP Connections to ST2 XM Tuner Non RNET Syste
27. gement allows two different broadcasts at the same time in a multi room audio distribution system XM satellite radio provides over 100 channels of music news sports comedy talk and entertain ment Its coast to coast coverage digital quality sound and many commercial free music channels make XM radio the choice for the discriminating listener XM radio is a subscription based service and lis teners can subscribe by visiting XM on the web www xmradio com or by calling XM s Listener Care at 800 852 9696 In addition to the traditional AM FM broadcast tuner function and the XM satellite access the ST2 XM Tuner can store up to 72 favorites or memory presets These are stored in groups of six called banks There are six banks for each tuner Each preset and each bank can be given a custom name of your choice The ST2 XM Tuner can be controlled from the front panel or by the dedicated ST2 KP tuner key pad It can also be controlled by the ST2 RC IR remote aimed at the tuner s front panel IR receiv er The ST2 RC IR codes can be learned into any IR learning remote control for easy system inte gration It can also be controlled by IR signals received through the IR connections on the rear panel from IR repeating system commonly used in distributed audio systems If the ST2 XM Tuner is part of an RNET enabled system such as the CAV6 6 S2 system the tuner can be controlled through an RNET keypad such as the UNO S2 The
28. gh the activation process step by step 3 complete and up to date full channel listing is available on the XM Radio website www xmradio com XM Radio Displays In addition to Channel and Category information the XM tuner will broadcast operating condition mes sages when the following conditions occur Display Condition HHTEHHB Antenna not connected Updating encryption code Acquiring channel audio or information ALR Channel not in service CH Channel SID no longer available Corresponding Artist Name or Song Title are null empty No channel available for chosen category ST2 XM OPERATION XM RADIO MODES XM Radio Modes There are four user modes for selecting music and viewing music information on the XM Tuner Preset default or normal Category Search Now Playing Display Preferences These modes are accessed through certain button and key presses from the tuner panel remote controls and keypads When choosing modes if no choice is made after 20 seconds the tuner will time out by showing EXIT and return to tuner display and Preset mode For all XM Modes The chart below outlines the button presses for various XM tuner functions outside of the XM modes mx DEDE NE All All User Modes Modes Ert Current Mode 5 joo 6 Signal Strength Hold Hold Hold Operating Mode Toggle This button press accesses the three non default XM modes The three modes will appear in order C
29. ms The diagram depicts a standard ST2 KP keypad connection to the keypad port on the back of the ST2 XM The keypad uses a 110 punchdown connection and an RJ 45 T568A connection to the tuner UNO S2 keypads z c gt AMloopantenna XM antenna LL v 2 9 ST2 Tuner T CAT 5 Cable AL O KeveanpPorts J ZONE AUDIO TO amp VIDEO Outputs J El Source Aupio ffl Vibo CONNECTIONS DY Serial gu Lal e e e e 2 CAV6 6 amp AC240V ACTIOV 29 e e Qe 9 9 9 9 o QV 9 1 9 8 2 9 8 9 9 20 MRussound D UT 6 6 e e e IN Our IN IN Our Our IR 2202404 Our in Trccer AA Hs ap ce 9000000 BE 4 100MA THEATER IN IN AI 9A RCA Cable E Source Connections with CAV6 6 Controller Amplifier RNET System The diagram depicts a typical setup using the ST2 XM Tuner
30. ner 2 AM FM Each time a tuner is selected the display will refresh with the current station or preset for that tuner and all subsequent button presses and memo ry preset entries will be associated with that selected tuner 2 Selecting desired band Push to switch between AM or FM band E Selecting a mode XM Push to select an XM operating mode E Exiting a mode XM Press and release until EXIT is displayed to exit the XM operating mode menu Selecting the desired frequency or channel Use 4 and for manual tuning To move quickly through the channels press and hold either 4 Or O for more than 1 5 seconds European frequen cies show in 05 MHz increments ST2 XM OPERATION ST2 KP KEYPAD CONTROLS 4 Selecting a Bank To select a bank select the desired tuner then press and hold 9 Or gt to select the desired bank The bank name will show on the display 4 Recalling a Memory Preset To recall a memory preset press and release 9 or gt to scroll through the presets for the selected bank Memory presets must be stored for ST2 KP recall sT2 KP Keypad Display The 5 character backlit display shows frequency and band plus XM channel and mode information Messages scroll twice then display the first 5 char acters ST2 KP Keypad Front Panel 21 ST2 XM OPERATION UNO S2 KEYPAD CONTROLS WITH CAV6 6 CAV6 6 UNO S2 Keypad Operation NOTE control the ST2 Tu
31. ner through the UNO S2 keypad the tuner must be configured as a source using the CAV6 6 programming Steps Turning the unit on The tuner is power managed by the CAV6 6 or other RNET enabled controller If the tuner is in standby mode any button press of the UNO S2 keypad will bring the tuner out of standby mode Selecting the desired tuner On the UNO S2 keypad press to select either Tuner 1 XM or Tuner 2 AM FM by choosing the tuner s preassigned source num ber Selecting the desired band AM FM only Push gt to toggle between AM band and FM band reception Selecting a Mode XM Push to toggle between XM modes Exiting a Mode XM Press and release until EXIT is displayed to exit XM mode selection menu Selecting the desired frequency or channel Use and for manual tuning or channel selection The frequency or channel will appear on the keypad and the active tuner move quickly through the channels press and hold either for more than 1 5 seconds Frequency Seek AM FM only A press on will seek the next higher tune able station If a tuneable station is not found end the SEEK function by pressing again Frequency Scan AM FM only To scan press and hold then release The tuner scans through tuned stations with a 5 sec ond preview before moving to the next station To end scanning press again Signal Strength Mode To check XM signal st
32. ns SELECT AM FM Confirms numeric selection XM Operating mode toggle MENU XM operating mode toggle E pv AM FM Selects AM or FM band XM Operating mode toggle E BANK UP DOWN Used for bank selection press and hold MEM UP DOWN Scrolls through memory pre sets for selected bank press 10 MUTE Mutes unmutes tuner audio output SCAN SEEK press see 14 below AM FM Scans through tuned stations with 5 second preview before next station press and hold XM Exit XM operating mode TUNER SELECTION Select source number assigned to TUNER 1 XM or TUNER 2 AM FM INFO XM Now Playing mode toggle EE SEEK UP DOWN AM FM Seeks next tuned station up down XM Next previous preset category info item display preference GUIDE XM Category Search mode toggle 25 26 ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU ST2 XM Tuner Setup Menus Note Ihe Setup Menu procedures must be performed from the ST2 XM Tuner front panel The ST2 XM Tuner Setup Menus provide setup and naming procedures for the ST2 XM main chassis the XM tuner module and the AM FM tuner module These procedures include source number assign ments assigning a custom name to a memory preset or a bank choosing a region for AM FM opera tion US or Euro factory initialization and system information If the ST2 XM is used with a non RNET system the ST2 XM can be connected and operated without any setu
33. nt TABLE OF CONTENTS Product 01 20 1 220 6 4 5 Component Guide ST2 XM Front 2 1 mmm nne nennen nnns 6 Rear Pane 7 ST2 RC Remote Control 8 ST2 XM Setup and Connections BASIC COMECON ean DX 9 ST2 KP and 10 CAI Series and A BUS CONNECTIONS acusicestece brat 11 Antenna ONE CHOI S 12 13 ST2 XM Operation AN RGO CW O RN RR 14 XM Radio 14 AE coena TERRE 15 18 Front Panel Controls cccccocotecotcontecntonncesesdiniedieiede inde dedadedesedeivieinleededvdete det denededidelanaesescsenecesens 19 DIZRO Remote GON Ol EES ESSES 20 ST2 KP Keypad 5 2 200 3 1 21 UNO S2 Keypad Controls with 6 1 14 4 nnn 22 23 UNO LRC1 Remote Control with 6 mmn 24 25 ST2 XM Tuner Programming Chassis Omm 26 Source Number mm
34. of components due to application of excessive power voids the warranty on those parts In these cases repairs will be made on the basis of the retail value of the parts and labor To return for repairs the unit must be shipped to Russound at the owner s expense along with a note explaining the nature of service required Be sure to pack the unit in a corrugated container with at least three 3 inches of resilient material to protect the unit from damage in transit Before returning a unit for repair call Russound at 603 659 5170 for a Return Authorization number Write this number on the shipping label and ship to Russound ATTN Service 5 Forbes Road Newmarket NH 03857 Due to continual efforts to improve product quality as new technology and techniques become avail able Russound FMP Inc reserves the right to revise system specifications without notice NOTES 37 NOTES NOTES 39 a 8 rj u E wi wm 4 wi wi i LI 4 Wh w
35. only of the type described in the operating instructions or as marked on the appliance 11 Grounding or Polarization Precaution should be taken so that the grounding or polarization means of an appliance is not defeated 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs receptacles and the point where they exit from the appliance 13 Cleaning The appliance should be cleaned only as recommended by the manufacturer 14 Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time 15 Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through the openings 16 Damage Requiring Service The appliance should be serviced by quali fied service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or E The appliance has been dropped or the enclosure is damaged 17 Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel Precautions
36. or and Outdoor Antenna AUDIO OUTPUT ST2 Tuner Alternate AM FM antennas The diagram above depicts a typical setup using the ST2 XM Tuner with the included XM antenna FM antenna and AM loop antenna Also shown are two outdoor antenna options not included Not to scale ST2 XM SETUP AND CONNECTIONS AM Antenna Connect the included loop antenna for AM recep tion to the back panel attaching the GND ground and AM ends to the appropriate connec tions for Tuner 2 It is recommended to use an external outdoor or attic mounted long wire antenna for best formance for AM reception Use a 5 to 300 ohm balun at the AM connection on the tuner and attach the 5 ohm coax cable to the balun Antenna Lead In Wire I d Q T Grounding F Conductors Ground Clamps Grounding an Outdoor Antenna ANTENNA CONNECTIONS FM Antenna Attach the included FM antenna to the Tuner 2 FM COAX connection on the back panel by push ing the F type quick connect termination of the antenna onto the FM connection It is recommended to use an external outdoor or attic mounted long wire antenna for best per formance for FM reception Attach the desired length of 75 ohm coax cable directly to the FM connection on the tuner Electric Service Equipment Power Service Grounding Electrode System If the tuner is used with an outdoor antenna the antenna m
37. p programming Follow the setup menus if custom names are desired or for system info If the ST2 XM is used with an RNET system such as CAV6 6 the following minimum setup must be performed for the ST2 XM to be properly controlled by the CAV6 6 1 ST2 Chassis Setup Menu Assign source numbers to Tuner 1 and Tuner 2 2 CAV6 6 Source Setup Menu Assign the corresponding source numbers to Tuner 1 and Tuner 2 3 CAV6 6 Source Setup Menu Assign command type PERIPHERAL to Tuner 1 and Tuner 2 NOTE Once the programming procedures are completed cycle power first to the Tuner and then to the CAV6 6 must be powered on last to establish a connection ST2 Chassis Setup Menu Source Number Chassis The Source Number procedure permits Tuner 1 XM and Tuner 2 AM FM to be assigned the proper peripheral source identities as will be assigned in the CAV6 6 Source Setup 9 Press TNR SEL to exit the Source Number menu Update Firmware Chassis The Update Firmware procedure allows the ST2 tuner s OS firmware to be updated The proce dure is performed using a 9 serial cable with one end connected to the RS 232 port on the back of the tuner and the other connected to a PC or laptop If an OS firmware update is avail able it can be obtained through the Document Center at www russound com XM tuner module firmware must be performed by an authorized Russound service facility 1 Enter the Setup Menu by pressing and holding the TNR SEL
38. r Appropriate button presses access the next or previous preference item Note For any display configuration the artist s name and song title will scroll before the display returns to the designated display format Channel Number CH HUMBER This selection displays the channel number only e g E82 Channel Name CH This selection displays the channel name only e g Radio Real Jazz Channel Number and Name tt CH This selection displays the channel number and name e g amp 3 The Groowe 121 Hews Sex 57246 STZXP UNOS2 UNOXRCI Display Preference mode 090 M Front Panel Operation Turning the unit on To turn the unit on push the On Off button up on the front panel Pushing the On Off button down turns the tuner off Selecting the desired tuner From the front panel use to toggle between XM and AM FM A backlight shows behind the selected label XM green or AM FM amber to indicate the active tuner In addition the LCD panel is also backlit green for Tuner 1 and amber for Tuner 2 Each time a tuner is selected the display will refresh with the cur rent station or preset and all subsequent memory preset entries will be associated with that selected tuner Selecting the desired band AM FM only Push to switch between AM and FM reception Selecting a mode XM Push to select an XM operating mode Exiting a mode XM Push 3319 exi
39. re Procedure Procedure Menu A SO MEM BANK CONTROLLR DIAGNOSTICS FACTORY SYSTEM NAME NAME Q ID Procedure Q INIT INFO Setup Procedure Procedure Procedure Procedure Procedure Menu BAND Selects character C e 9 Selects character position Repeat for each character in name BAND SAVE CHANGES ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU Memory Name XM continued 9 Press BAND to advance MEMORY NAME appears again 10 Press BAND to access the Memory Name entry screen 11 Press Tune Up Down to select a character and MEM Up Down to change a character position Up to 12 characters can be entered one by one blinking cursor indicates the place ment of the character being entered 12 Press BAND when memory name is entered 13 SAVE CHANGES will appear 14 Press Tune Up Down to select Yes or 15 Press BAND to save memory name The Memory Name menu returns to the Memory prompt to name other presets or press TNR SEL to return to the Memory Name menu start Bank Name XM custom name can be assigned to each of the six banks of Tuner 1 XM 1 Enter the Setup Menu by pressing and holding the TNR SEL button 2 TUNER SETUP appears Press BAND 3 MEMORY NAME appears Press MEM Up Down until BANK NAME appears on the tuner 4 Press BAND 5 Bank appears 6 Press the Tune Up Down buttons to select the Bank 7 Press BAN
40. re allows the erasure of all programmed settings and returns them to the factory default settings 1 Enter the Setup Menu by pressing and holding X WARNING This Procedure t BUILD returns the TIME ST2 Tuner to its Factory settings BUILD BAND DATE Are you sure VERSION DG Ow BAND Please wait Cycle Power the TNR SEL button 2 TUNER SETUP appears Press MEM Up Down until FACTORY INIT appears on the tuner 3 Press BAND to enter the FACTORY INIT menu 4 Are you sure appears on the tuner Using Tune Up Down buttons view the Yes and No selections 5 Press BAND to select A No selection returns to the top of the Factory Init menu A Yes begins the initialization 6 Please wait appears on the tuner during the process and Cycle Power appears when com plete 7 Cycle power on the ST2 XM tuner 27 28 ST2 XM TUNER PROGRAMMING ST2 TUNER SETUP MENU Press BAND Press BAND at Build Time to view Press MEM Up Down to advance Press BAND at Build Date to view 1 Enter the Setup Menu by pressing and holding Press MEM Up Down to advance the TNR SEL button Press BAND at Version to view 2 TUNER SETUP appears Press MEM Up Down 9 Press TNR SEL to exit the System Info menu until SYSTEM INFO appears on the tuner System Info Chassis The System Info menu shows the ST2 Tuner s manufacturing build properties E
41. rength press and hold then release The display shows the signal strength rating To exit press B again Selecting a Bank To select a bank press and hold for bank up or 9 for bank down The bank s name will be temporarily displayed on the UNO S2 Recalling a Memory Preset Press 4 and to scroll through the memo ry presets for the selected bank This procedure will step through all of the presets in the current bank then loop back to start at the first one Only configured presets will be displayed Mute Press to mute unmute the tuner audio output ST2 XM OPERATION UNO S2 KEYPAD CONTROLS WITH CAV6 6 LS 3 TUNER SELECTION Select source number assigned to TUNER 1 XM or TUNER 2 AM FM 2 TUNE UP DOWN Used for manual station or channel selection SELECT AM FM Selects AM or FM band XM Operating mode toggle SEEK press AM FM Seeks next higher tuned station XM Exit current XM mode 4 SCAN press and hold AM FM Scans through tuned stations with 5 second preview before next station XM Signal Strength mode toggle 5 MUTE Mutes unmutes tuner audio output BANK SELECT Used for bank selection press and hold MEM UP DOWN Scrolls through memory preset stations press NOTE UNO S2 keypads are connected to the CAV6 6 to control the ST2 XM through UNO S2 keypads do not connect directly to the ST2 Tuner 23 24 ST2 XM OP
42. set is saved the appropriate preset number M1 through M6 and SAVED appears on the LCD The selected station setting reappears and the sound resumes after the button is released Recalling a Memory Preset To recall a memory preset use to select the desired bank then press the desired preset button M1 to M6 In addition to direct selection the memo ry presets can be accessed by using and to scroll through all presets for the bank selected Backup and Restore Once all of the tuner settings are completed it may be advisable to create a backup of the programmed settings for future use The backup will then be avail able in case tuner settings need to be restored The RNET Backup Utility is available through the Document Center at www russound com Also required are a DB9 male to female cable and laptop or desktop PC 19 ST2 XM OPERATION ST2 RC REMOTE CONTROL ST2 RC Remote Control Operation The ST2 RC remote control is the only means of remote operation of the ST2 XM in a non RNET sys tem The ST2 XM front panel displays information for the tuner that is receiving commands from the ST2 RC However the ST2 RC commands do not change which tuner is playing that is done through the sys tem s source selection Turning the unit on off To switch the ST2 tuner in or out of standby mode push or any other button except TUNER 1 or TUNER 2 Selecting the desired tuner To control a tuner push Or When
43. t the XM mode selection menu Signal Strength mode XM Press and hold and release display shows the signal strength rating To exit press 59 Selecting desired frequency or channel Press and release and for manual tuning Selecting Stereo or Mono Output AM FM only Press and release to toggle between stereo and mono mode STEREO or MONO appears briefly on the screen when selecting mode Selecting Distant or Local Reception AM FM only Press and hold to toggle between distant and local mode DISTANT or LOCAL appears briefly on the ST2 XM OPERATION FRONT PANEL CONTROLS screen when selecting mode Normal operation is in Distant mode In cities antennas can pick up multi path signals when they bounce off buildings and get doubled Local mode limits the noise associated with these reflected signals Bank Memory Presets Each tuner has six banks of preset memory settings and each bank holds six presets for a total of 36 pos sible presets for each tuner 72 total presets Presets are associated with the tuner that is selected at the time the preset is saved Memory Preset programming From the front panel perform these steps 1 Select a tuner using 8 2 Use to choose from one of six banks 1 6 3 If AM FM select the desired band using 4 Tune to desired station or channel 5 Push the desired memory preset M1 through M6 button for more than 2 seconds When the memory pre
44. the rear panel The ST2 XM Tuner com ponent contains two tuners which must be set up as two sources There are two IR connec tions one for each tuner in the ST2 XM You will need two IR link cables Russound P N 09 0508 for these connections There is a unique IR code set each for Tuner 1 and Tuner 2 which allow each to be controlled independently These codes can be learned from the ST2 RC remote into learning capable remotes and keypads If you are using an IR controlled system from another manufacturer installation should be sim The ST2 XM IR codes may be learned into many other manufacturers remote controls that have learning capability for unified control over the A V equipment RNET Connection To link the ST2 XM to an RNET compatible device use a CAT 5 passthrough patch cable with similar wiring terminations at each end Connect one end of the cable to the RNET Link In of the ST2 tuner and connect the other end of the patch cable to the RNET Link Out connec tion on the RNET compatible device BASIC CONNECTIONS ST2 KP RJ 45 Connection Wiring RJ 45 using T568A Wiring Standard 2 i BLUEWHITE ORANGE BROWNWHITE BROWN LL E E I IL lt Lu 2 0 O ST2 KP Keypad to ST2 XM Connection Non RNET System The ST2 KP connects to the ST2 XM tuner with CAT 5 cable using an RJ 45 T568A jack on the tuner connection end o
45. ust be grounded against static charges and voltage surges Consult the instructions that came with the antenna or contact the antenna manu facturer for proper installation instructions The diagram gives a general depiction of how an outdoor antenna should be grounded For complete guidelines on antenna grounding procedures please con sult the National Electrical Code Section 810 ANSI NFPA No 70 1984 13 14 ST2 XM OPERATION XM RADIO OVERVIEW XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal delivered by satellite and depend ing on location transferred by terrestrial antennas The radio is a subscription based service with a monthly provider fee and an activation charge XM radio broadcasts several channels for preview but will not broadcast the full range of channels without activation Activation and billing are handled sole ly through XM Radio To activate the XM tuner 1 Turn on the power select the XM Tuner and select channel 0 The tuner s eight character XM satellite Radio ID number will appear on the display Write the number down to have it available when contacting XM Radio for activation The number is also shown on the back of the unit and on the product box 2 subscribe have a major credit card and your XM Radio ID number at hand and contact XM at http www xmradio com activation You can also activate service by calling XM Radio at 1 800 852 9696 You will be guided throu
46. with a CAV6 6 amplifier Each tuner in the ST2 unit must be connected as a separate source for audio inputs UNO S2 keypads are connect ed to the CAV6 6 keypad ports NOT the ports on the ST2 Tuner ST2 XM SETUP AND CONNECTIONS CAi SERIES AND A BUS CONNECTIONS ST2 KP CA LCD2 IR Q 759 C IR Link Cable ET Cable RCA Cable NEWMARKET NH U S A r KEYPAD PORTS 1 2 3 4 5 6 ELE o lt Cable IR Link Cable fun Source Connections with Series Controller Amplifier The diagram depicts a typical setup using the ST2 XM Tuner with a CAi Series amplifier Each tuner in the ST2 unit must be connected as a separate source for audio inputs A KP2 x Serial m x RCA Cable IR Link Cable RCA Cable IR Link Cable P A Neg Source Connections with A BUS Audio Distribution Hub The diagram depicts a typical setup using the ST2 XM Tuner with an A BUS system s audio distribu tion hub Each tuner in the ST2 unit must be connected as a separate source for audio and IR inputs 11 12 ST2 XM SETUP AND CONNECTIONS
47. y button on the UNO S2 keypad 3 BASIC SETUP will appear Enter the Basic Setup Menu by pressing the Play button again 4 SOURCE NUM will appear Use and buttons to select the source number to which Tuner 1 XM Is connected Press the Play button to enter your choice 5 SOURCE NAME will appear Use and buttons to select the name for the source e g Tuner 1 or XM Press the Play button to enter your choice 6 COMMAND TYPE will appear Select PERIPHERAL from the list Press the Play button to enter this choice 7 SAVE CHANGES appears Select Yes and press the Play button to save changes 8 SOURCE NUM appears again Repeat steps 4 through 7 to configure the second tuner 9 Press the Setup button three times to back out of the Installation Menu Source Configuration Note When the ST2 XM Tuner is used with the CAV6 6 or other RNET controller it is configured as an command type Peripheral and is connected the bus This makes the tuner behave as a fully integrated device with UNO S2 keypad support Each tuner must be set up with a unique source number 1 6 or unassigned An unassigned tuner is not controlled by the RNET bus Key Function Note When using the tuner with the CAV6 6 S2 system do not reassign keypad and remote buttons for tuner control in the CAV6 6 Key Configuration Menu When the tuner is assigned the Peripheral com mand type in the CAV6 6 Setup Menu key assignments and functions
48. y on the screen when selecting mode Normal operation is in stereo mode On a preset the stereo mono setting is saved for that preset Selecting Distant or Local Reception AM FM only Press to toggle between Distant and Local mode DISTANT or LOCAL appears briefly on the screen when selecting mode Normal operation is in Distant mode Recalling a Memory Preset To recall a memory preset select the desired tuner press and enter the desired bank number 1 6 then press and enter the desired preset number 1 to 6 The memory presets can also be accessed by using and to scroll through all presets for the selected bank Saving Favorites The remote control stores two favorites similar to memory presets per tuner These are set simply by selecting either Tuner 1 or Tuner 2 setting the desired frequency and pressing and holding or until FAV1 2 saved appears on the tuner Stored Favorites are then recalled by pressing either ST2 KP Keypad Operation 1 Turning keypad on off To activate the ST2 KP press 9 55 to power down the keypad display The keypad remains powered until the ST2 XM Tuner is turned off 1 Selecting desired tuner To select a different tuner press and hold 9 If the keypad has been hardware jumper selected to Tuner 1 or Tuner 2 it will not switch between the two tuners The backlight color of the display will be green for Tuner 1 XM and amber for Tu
Download Pdf Manuals
Related Search