Home

Philips DVDR 77/02 DVD Recorder User Manual

Contents

1. Analogue output For devices connected to the analogue audio output AUDIO L R OUT you can select from the following settings Stereo For devices without DolbySurround or TruSurround Use this setting if the DVD recorder is only connected to a stereo TV set Surround Dolby Digital and MPEG 2 multi channel are mixed down to a DOLBY surround compatible two channel output signal For devices with Dolby Surround Pro Logic decoder Night mode Night mode optimises the sound for playback at low volume You are therefore less likely to disturb your neighbours This only works for Dolby Digital audio on DVD video discs 94 User preferences Language settings Audio Language Recording audio Subtitle Menu Country Status box Live source view Auto standby Standby Display User preferences Language English Language 1 English English Other Features On On On Normal Bright You can choose the following settings in this menu Audio Language Playback audio language Recording audio Selection of audio recording for bilingual programmes Subtitle Subtitle language Menu Screen menu language Country Select the country you currently live from the list Additional settings You can select the following functions in this menu Status box Along with the on screen menu the OSD On Screen Display a
2. Delete To delete last entry or clear programmed recording TIMER Additional TV functions This will only work with TV sets with the same remote control code RC5 e g Philips TV sets TV VOLUME TV VOLUME MUTE XK TV volume Increase TV volume TV volume Reduce TV volume TV sound off Switch TV sound on off For the following functions you need to hold down the button at the left side TV and then select the function you need with the appropriate button STANDBY 0 9 CHANNEL CHANNEL Switching the TV off Number buttons 0 9 TV programme number To select a higher programme number TV programme number To select a lower programme number Front of the device STANDBY ON OPEN CLOSE 4 MEDIA SLOT EJECT RECORD gt 4 gt gt a I 8 l 0 Z W Switch on or off To switch off or on interrupt a function interrupt a programmed recording TIMER Open close disc tray Open close disc tray Media Slot for PC PCMCIA cards adapters Eject PC PCMCIA card Record Record the current TV channel Playback To play a recorded disc Select previous title search backwards Select next title search forwards Stop Interrupt playback recording Behind the flap at the right hand corner on the front Switching between the S VIDEO and VIDEO sockets takes place automatically If a signal is available at both sockets at the same time the signal at the S
3. If required change the information with A WV or the number buttons 0 9 O Confirm with OK Q To end press TIMER switch off with STANDBY NexT View Link This DVD recorder is equipped with the NexTView Link feature If your television is also equipped with this function you can mark TV programmes on the television for programming These TV programmes will automatically be transmitted to a TIMER block on the DVD recorder If you clear the marking of the TV programme on the television the corresponding TIMER block on the DVD recorder will also be cleared For more information read the instruction manual of your TV set 90 Programming a recording TIMER PROBLEM The DVD recorder is not responding Switch off timer recording flashes on the TV screen Error message Insert recordable disc The error message Disc locked appears briefly on the screen Error message Memory full The Data error message appears on the screen The Collision message appears on the screen Programming a recording TIMER Problem solving for programmed recordings SOLUTION yYWhile a programmed recording is being made you cannot operate your DVD recorder manually If you want to cancel the programmed recording press STANDBY v The DVD recorder was switched on a few minutes before the start of a programmed recording Switch off the DVD recorder using STANDBY A programmed recordin
4. My TV set has Easylink With Easylink you can search for and store TV channels only on the TV set These settings are accepted by the DVD recorder Use this function to start the transfer of TV channels from the TV set Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU on the remote control The menu bar appears Select TA symbol with lt or gt Select Installation using W or A and confirm with P Select Autom search using V or A Installing your DVD recorder Press gt The automatic TV channel search starts This allows the DVD recorder to save all available TV channels This procedure may take several minutes Installation Autom search Searching for TV channels o 90 8 00 Channels found When all the TV channels have been found Autom search complete will appear on the TV screen Please wait 10 To end press SYSTEM MENU ENGLISH You can read about how to search for a TV channel manually in Manual TV channel search Sorting and deleting TV channels manuall After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions programme numbers You can use this function to rearrange the TV channels already stored or to delete TV channels you don t want or thos
5. Table of contents 6 Playback sisssssessesisscketsresessissscvemmnc 38 General notes on playback 38 WES lE a a E A A TE ET 38 Phying a DVD video dit vcs csses cncsscsscssccccseseesstecasistssscasensusesssbecnsedbseesatieens 39 Playing a DVD RW R disc 40 Playing an audio CD ee 40 Playing an MP3 CD 41 Playing a Super Video CD sic ccsscicssasscccsscscsseassssdssnvesscensonassobenosduosoecnsoasosen 42 Ed additonal playback features 43 Changing to another titlefchapter cccssssesrcesenvsesssorssecaseenseennsenvessoote 43 Se NVI E ETE E EE E E T 43 Sey N TE E ETE E R 44 Slow motion 44 Search by time 45 Repeat Shuffle play a 45 Repeating a passage A B ou sssssssssssccssssceseessseseesnsensesssescssesessenseeneesvess 46 SCAM ACME REE E E Camera angle a GON EE ei S a aa iS Select the audi aNgUagS nssscsrisecssiisirsisrceresrersissisisissasstrerssssssrsedsetss tess 47 SA A E E E E lornvauesnnaversy 47 8 DI Manager DM cccccee008 48 General WMMOMTALION sssini 48 Adding a disc to the Disc Manager sssssssssssssssssesesessesssssensesssenesees 48 Removing discs from the Disc Manager s sssssssssescsssssessesseseseseesees 49 Searching for a title in the Disc Manager 50 Searching GIGS aisen 50 Searching for bank Eton ise acesacesceczeiss Sadssecdustesnasehsssussssasusieecessedesbidz
6. eee 21 Cd instatting your DVD recorder 22 Mical TS NNER nai A RNR 22 Using a satellite FOCOIVER siiicar 24 Allocating adecoder s sessississsssscosssossnsssssissssnsntisssssvassesisnonsssnsr sassesasnnnarinis 25 Connection using a component video Y Pb Pr YUV cable 26 Manual TV channel SearCh oi 2 csscsssssescsnsconsesseosivsessedisennssseadetasseab cnvssabeatvese 27 Sorting TV channels automatically Follow TV sssssssssssssssssssssssssrsceersese 29 Automatic TV channel search c s ciessssessscersecnossesecentsenvssnvssieasiecrseeenbvese 30 Sorting and deleting TV channels manually ssssssssssssssreerresessssssssssrerreeeese 31 Setting dhe AMUSE COMUNE esiseinas 32 Recording audio switching over 2 channel sound sssssssssssessssssesssssss 33 Seting he dme AINE data osiin inn 34 on screen information 35 Symbols in the menu bar c5 ccssscscescssssscocessosseassosnsedsnssesnsesuonsesnancoesbubassseas 35 Menu bar Menu bar 2 Field for temporary WiGssages ic ccssctsiscsccsacsesssssuaseesrsnnsenssassestionncsins 35 RON E a A E T A A A T 36 Disc ype YME Beire R NA 36 Operating mode SVT S ssostni erisir eiisriririis oiis 36 Tuner Monmiton DO onasensosnannioaiii ina i 37 Live picture in the Tuner information box ssssssssssessreesssssssssssssssssesss 37 Tiner information DOK s sisiississssessssiiiinisisssesisitsrisiesesiss sainia siia ana inas 37
7. Select Change country using V or A and confirm with gt Select the corresponding country using A or W and confirm with OK OO 080 88009 To end press lt and then SYSTEM MENU 100 Access control Child Lock Changing the PIN code Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU The menu bar appears ENGLISH Select the T icon using lt 4 or P Select Disc features using V or A and confirm with P Confirm Access control using Enter your four digit PIN code If the code is new you may have to Disc features enter the code a second time as confirmation Access control Enter code Select Change code using A or W and confirm with P Auto resume On Enter the new code using the number buttons 0 9 Enter the same code again as confirmation OO 080 OOOO 86 Quit using lt and SYSTEM MENU l have forgotten my code Press STOP Ml four times step Q then press OK Access control is now switched off You can now enter a new code as described above Access control Child Lock 101 Before you call an engineer PROBLEM Your recorder does not respond to any button being pressed and the display shows Lai Thy Pinte S iy ONT The device does not react when you press a button although the remote control works Your DVD rec
8. 1 During playback press SUBTITLE Select the required subtitle language using V or A You can also enter the number directly using the number buttons 0 9 You can switch off subtitles again with 0 or by pressing off 2 Playback continues in the new subtitle language 47 ENGLISH Disc Manager DM General information 48 The Disc Manager is an integrated database in the DVD recorder that remembers all recordings made by this DVD recorder This gives you a complete overview of your entire video collection at the touch of a button The Disc Manager gives you quick and easy access to every recording made with this DVD recorder The Disc Manager also tells you which film was recorded on which disc and how many unrecorded minutes remain on the discs And You can go automatically to the beginning of the selected recording and start playback How many discs can I save in the Disc Manager You can store up to 999 discs on this DVD recorder The maximum number of titles is more than 9 000 The maximum number of titles per disc is 49 Caution when recording with other DVD recorders Don t use a disc stored in the Disc Manager for recording on other DVD recorders If you use a disc to record on another DVD recorder then this disc will no longer be recognised by the Disc Manager In this case delete the disc from the Disc Manager s memory and then add it after it has been recorded Adding child proof discs If you w
9. Edit pictures Button EDIT Advanced editing of the JPEG pictures You can edit the pictures in the DVD recorder and then store them back on the memory card or a DVD RW R The original picture remains unchanged and the modified one is additionally stored on the medium Please make sure the memory card or DVD RW R is not write protected and has enough storage space 1 Press at the required picture the button EDIT 2 Select one of the displayed functions with the lt or P button Using the buttons on the remote ANGLE Rotates the picture ZOOM Enlarge the picture STOP W Returns to the picture overview CLEAR Discard the changes The picture will be reloaded Overview Returns to the picture overview Rotate Rotates the picture by 90 each time you press OK Flip Mirrors the picture along its vertical axis when you press OK The Digital Photo Manager The Zoom Using this function you can enlarge the picture and pan through the enlarged picture 1 Press OK to activate the zoom function 2 Select the area to be enlarged with 4 gt V A T 2 8 You can press ZOOM to enlarge the selected area at several steps 0 Z O Press OK to return to the normal picture size W Filters Using this function you can modify the picture properties 1 Press W and select one of the displayed functions using W or A Confirm with P Which options are available Sepia Dis
10. MAX CHAP The DVD recorder is in initial installation mode Switch the TV on then read the paragraph on Initial installation in Installing your DVD recorder No input signal available signal inadequate or unstable The menu on the screen is active Disc tray opening Disc tray open Disc tray closing Disc being read Once recording has been successfully completed the table of contents is created The menu structure is created after the first recording has been made on a new disc You received a copy protected signal This may come from a copy protected DVD videotape of a DVD video player or from a TV channel Please wait until this message disappears The DVD recorder is busy performing a task A disc has not been inserted for recording If a disc has been inserted it cannot be read Information about the inserted DVD is displayed on the screen The DVD recorder is processing the changes to make them DVD compatible The entire disc is erased The disc inserted is either new or has been completely erased no recordings The disc is protected against recording The maximum number of titles per disc has been reached The maximum number of titles on a disc is 48 The maximum number of chapters within a title or the disc has been reached The maximum number of chapters within a title is 99 on a disc 124 The disc is full There is no space for new recordings A disc with PAL recordings has been inserted
11. The machine is trying to record an NTSC signal Insert a new disc or one that contains NTSC recordings A disc with NTSC recordings has been inserted The machine is trying to record a PAL signal Insert a new disc or one that contains PAL recordings An illegal action e g OPEN CLOSE button was attempted during recording Playback was started for an empty title or the following title is empty An attempt has been made to record during playback of a protected disc This message appears if an attempt is made to insert a chapter marker EDIT button ENGLISH An error occurred when writing the title If this error keeps occurring please clean the disc or use a new one For instructions on how to clean a disc see the section on Cleaning the discs in the next chapter An error occurred when writing the title Recording was continued the error was skipped After the automatic search the menu for setting the date time will appear on the screen During the automatic channel search the TV channels found will be counted The disc tray cannot be closed opened The new recording will be added at the end of all the other recordings SAFE RECORD Data transfer EasyLink from the TV is in progress After the creation of the menu structure the disc is prepared The DVD Recorder has been switched on The DVD Recorder has been switched off The Digital Photo Manager is switched on The Digital Photo Manager will be swi
12. and Date are correct O When all information is correct save by pressing OK xl can see more installation menus on my TV set Not all the necessary data has been transferred Please enter the settings by hand as follows For more information on the various functions see Initial installation in Installing your DVD recorder 1 Select the desired audio language using W or A and confirm with OK 2 Select the desired subtitle language with W or A and confirm with OK 3 Select the desired screen format position using V or A 4 3 letterbox For a 4 3 TV set cinema format black bars above and below the picture 4 3 panscan For a 4 3 TV set full height format with the sides cut off 16 9 For a 16 9 TV set Confirm with OK Select the country of your residence with W or A If your country does not appear select Other Confirm with OK Initial installation is now complete ENGLISH ay Problem 13 Connecting with a scart cable without Easy Link Have the following cables ready an aerial cable 1 supplied a mains cable 2 supplied a scart cable 3 1 Remove the aerial cable plug from your TV set Insert it into the ANTENNA IN socket at the back of the DVD recorder 2 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set 3 Plug a scart cable i
13. es os wO 00 0000 90 6 Picture setting Sound setting Language setting Additional settings Remote control settings Control the DVD recorder using the remote control of your Philips TV set Disc settings Recording settings Installation Switch on the TV set If required select the programme number for the DVD recorder Press SYSTEM MENU on the remote control The menu bar appears Select A using lt or and confirm with V Select the appropriate function with W or A and confirm with gt Select the appropriate line using V or A and confirm with gt Select the appropriate function using W or A or the setting with do P Confirm the new setting by pressing OK To close the menu item press lt Picture settings You can choose the following features in this menu TV shape The picture signal from your DVD Recorder can be set to match your TV screen 4 3 letterbox for a wide screen picture with black bars at the top and bottom 4 3 panscan for a full height picture with the sides trimmed 16 9 fora wide screen TV set screen edge ratio 6 9 Black level shift Adapts the colour dynamics for NTSC playback when switched to On User preferences Video shift Use this feature to adjust the position of the picture on your TV left or right using 4 P to suit your TV set RGB attenuation With the buttons lt P you can attenuate or amplify the RGB signal on the
14. important information on how to set up and operate the machine The DVD recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa or in conditions of extreme humidity Wait at least three hours after transporting the machine The DVD recorder needs this time to acclimatise to its new environment temperature relative humidity etc Your Philips team hopes your new DVD recorder will bring you many years of enjoyment What is a DVD DVD Digital Versatile Disc is a storage medium that combines the convenience of the compact disc with the latest digital video technology DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc How good is the resolution of DVD compared with VHS The razor sharp digital images have a resolution of more than 500 lines of 720 pixels per line This is more than twice as high as VHS and is even better than the laser disc Its picture quality is easily comparable to the digital masters produced in recording studios What can DVD RW do DVD ReWritable uses phase change media the same technology on which rewritable CDs are based A high performance laser is used to change the reflective properties of the recording layer this process can be repeated more than a thousand times What can the DVD R do DVD R write once DVD Unlike a DVD RW disc this disc can only be written to o
15. press SYSTEM MENU 34 Installing your DVD recorder On screen information On screen information You can check or change many of the functions and settings of your DVD recorder via the system menu bar The menu bar cannot be displayed during recording Symbols in the menu bar Press SYSTEM MENU to open and close the menu bar main menu Use lt and P to select the relevant function Use W to confirm the function and go either to another menu or execute the function directly Some functions may not be available depending on the disc inserted Menu bar TA User preferences T Title track Chapter index E Audio language e Subtitle language PX Camera angle A Zoom Menu bar 2 While menu bar is being displayed you can go to menu bar 2 by pressing P again i Sound lt gt Frame advance D gt Slow motion b gt Fast forward 3 Search by time Field for temporary messages The top left corner of the menu line contains a field for temporary messages relating to the various operating modes This information appears briefly on the screen when certain disc functions have been activated ae Shuffle SS Scan ee Repeat entire disc e Repeat title gt S Repeat track 35 ENGLISH 36 chapter E locked resume b gt gt lt Repeat chapter Repeat from A to the end Repeat from A to B Camera angle Child lock enabled Resume playback Illegal action Status
16. rolls and albums can be erased on a recordable media DVD RW or memory card This procedure cannot be reversed The Digital Photo Manager PROBLEM Messages instead of the thumbnails Error message Media does not contain photos My computer can not read the DVD RW R The disc CD ROM DVD can not be read by the DVD Recorder no pictures available The memory card can not be read by the DVD Recorder no pictures available The Digital Photo Manager Problem solving for Digital Photo Manager SOLUTION v Thumbnail not available The photo does not have a associated thumbnail In this case the photo but not the thumbnail is viewable v Too large to display The image is too large to be viewed in its thumbnail format v Hidden photo The corresponding hidden photo will not be shown during the slide show You can unhide this photo in the album overview again v Photo not found In the album overview a photo entry is found that no longer exists on the referenced source media On the inserted media disc or memory card no photo can be found vThe file extension has to be JPG and not JPEG vThe storage media should contain a subfolder DCIM Under that there should be folders so called Rolls Only pictures in these folders can be recognised v Pictures can also be stored in the root directory vBefore you make changes to the storage media check the content of the media in a computer or
17. y Depending on the initializing period it can take some time before you see Menu Language the picture on the TV English v Many TV sets are switched by the DVD recorder to the programme Espafiol number for the scart socket by way of a control signal sent through the Frangais scart cable ENGLISH Italiano v If the TV set does not automatically switch to the scart socket programme Deutsch number manually change to the corresponding programme number on your RS Press OK to continue TV set see your TV s operating instructions a Check that the scart cable is connected from the TV set to the EXT 1 y TO TV I O socket on the DVD recorder The EXT 2 AUX I O socket is intended only for additional devices Problem Then read the paragraph on Initial installation in Installing your DVD recorder Connecting with an S Video Y C cable This connecting cable also known as the SVHS cable is used to transmit the brightness signal Y signal and colour signal C signal separately This mini DIN socket plug is also called a Hosiden socket plug Have the following cables ready an aerial cable I supplied a mains cable 2 supplied an S Video SVHS cable 3 an audio cable 4 supplied red white plug 1 Remove the aerial cable plug from your TV set Insert it into the ANTENNA IN socket at the back of the DVD recorder 2 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder a
18. 01 01 03 0 28 What do the displays on the screen mean Title Title Date Date of the recording Duration Length of the recording Page1 1 To select title press OK 50 Disc Manager DM Press A or W to select the desired title Confirm with OK Q O xI see the message Insert disc number _on my screen V v The selected recording is located on the Disc Manager disc with the displayed disc number Please insert the appropriate disc Problem Q The DVD recorder searches for the start of the appropriate recording ENGLISH Searching for a blank section You can search for space for a new recording on the disc at least minute of blank space for example at the end of existing recordings This only works with discs which have already been stored in the Disc Manager Press DISC MANAGER on the remote control Select Browse discs using A or V Confirm with OK A list of the recordings on the disc you have selected will appear on the TV screen 0080 Use Aor Wo select a disc disc number on which there is enough space for the recording How can see how much space is available for the recording The space available is designated as Empty The time is displayed next to the title Empty You can use the REC MODE button to change the recording mode recording time How can I choose the titlel Empty if there were many recordings on the disc In this case pre
19. 4 symbol using or lt and confirm with V You can now use the lt or P button to go forwards or backwards one frame at a time If necessary switch the menu bar off with the SYSTEM MENU button 2 To continue playback press PLAY 1 During playback press PAUSE I on the remote control Now hold down 44 or PPI to switch to slow motion 2 You can switch between different speeds using ME or PPI Slow motion via menu bar During playback press PAUSEIlI and then SYSTEM MENU on the remote control The menu bar will appear at the top of the screen Select the gt symbol using P or lt and confirm with W You can now use the lt or P button to select different forward and backward slow motion speeds If necessary switch the menu bar off with the SYSTEM MENU button 3 To continue playback press PLAY twice 44 Additonal playback features Search by time Additonal playback features Using this feature you can select where playback should start select elapsed time 1 During playback press SYSTEM MENU on the remote control The menu bar will appear at the top of the screen Select the symbol using or lt and confirm with W Playback is stopped and a box appears on the screen showing the elapsed time 3 Enter the start time with the digit keys 0 9 from where playback should start Confirm with OK x The time entered will flash on the screen V v The selected title is shorter th
20. DVD recorder to play back or have only connected a satellite receiver you must still complete the initial installation This is necessary so that the basic settings are stored correctly Once initial installation is complete you can use the DVD recorder as normal Select the desired language for the on screen menu by pressing W or A What is an on screen menu The multi language on screen menu takes the mystery out of using your new DVD recorder All settings and or functions are displayed on your TV screen in the relevant language Confirm with OK Select the desired audio language using W or A What is an audio language The DVD will play the sound in the language you select provided this language is available on the disc If it is not available on the disc the first language on the DVD will be used instead The DVD Video Disc menu if available will also be displayed in the language you select Confirm with OK Select the desired language for the subtitles by pressing W or A What is the subtitle language The subtitles will be displayed in the language you select provided this language is available on the disc If it is not available on the disc the fist language on the DVD will be used instead Confirm with OK Installing your DVD recorder Virgin mode 4 3 letterbox 4 3 panscan 16 9 Press OK to continue By Virgin mode Country Austria Belgium Denmark Finland France Press OK t
21. In case you want to store pictures on a medium that cannot be recorded by the DVD recorder Picture CD CD ROM finalised DVD R DVD you can store up to a maximum of 100 pictures per album in 20 albums These albums will be stored in the internal memory with the appropriate disc ID number With this number the allocation to the different disc is possible Select from the following chapters The PC PCMCIA card to install or remove the memory card Showing JPEG pictures from a roll in order to view and modify the pictures and create slide shows from the roll Advanced editing of JPEG pictures for advanced editing options such as color sharpness Creating an album to arrange pictures from different rolls in a definite order and to create a slideshow from the album Making a DVD compatible slide show Make a slide show from the roll album for viewing on a DVD player Storing rolls albums on a DVD RW R Store your JPEG pictures for archiving on a DVD RW R Changing roll settings to modify the rolls to your personal preferences Changing album settings to modify the albums to your personal preferences Changing the media settings to modify the storage media DVD RW R memory cards to your personal preferences What is the difference between a Roll and Albums Rol A folder containing JPEG pictures It is comparable with a conventional 35mm film for cameras Rol
22. On a recorded DVD RW disc you can add another recording to an existing title This recording is added to the title as a chapter The existing information will be overwritten starting from this point Titles will also be overwritten that follow the current title depending on the length of the new recording The recording type Quality will be taken from the current title To play back this recording press SYSTEM MENU and use the P button to select the C Chapter symbol You can also use the T C key For further information see Changing to another title chapter in Playback What happens with DVD R discs New recordings on DVD R discs can only be added after existing recordings It is not possible to overwrite existing recordings on DVD R discs In the index display find the title to which the new recording is to be added Look at the last minute of the old recording playback Press PAUSE Il on the remote control at the position where the new recording is to go Il will appear on the screen To monitor the recording you can press MONITOR to switch to the internal tuner Now start recording as usual by pressing REC OTR on the remote control The new recording will be inserted Stop recording with STOP W O OO 86 Manual recording Selecting the recording type picture quality You can select the picture quality of the recording using the recording quality feature and hence the maximum recording ti
23. ROM When creating MP3 CDs please note the following File system ISO9660 Directory structure maximum of 8 levels Formats mp3 Filenames maximum of 2 characters 8 3 Maximum of 32 albums 999 titles Supported sampling frequencies 32 44 1 48 kHz Music with sampling frequencies other than these will be skipped Supported bit rates 32 64 96 128 192 256 kbit s ID3 Tag Version l l In later versions the directory name is displayed as the album and the filename as the title ENGLISH Important notes for playback Only the first session of a multi session CD will play back Insert an MP3 CD Playback starts automatically MP3 CD display If the TV is on the MP3 CD screen appears automatically During playback the current track number and its elapsed playing time will show on the TV screen and on the recorder display During stopped playback STOP MM button the numbers of the albums will show on the TV screen and on the display Further information on the album track and artist will also be displayed if included in the ID tag 2 Stop playback using STOP Ml The number of albums is displayed in the display Additional playback features Using 44 or PPI select the next or previous title You can also use the T C button to select titles and albums Press the T C button and use the P or lt 4 button to select the T symbol for title or C for chapter Use the V or A buttons or the number
24. TV set This lets you watch the picture from any unit connected to this scart socket set top box video recorder or satellite receiver and at the same time record from another source If you have not connected a device to the EXT 2 AUX I O socket or the device is switched off you can use this button to switch between TV reception and the signal of the DVD recorder But this only works if you use a scart cable to connect the TV set to your DVD recorder EXT 1 TO TV I O socket and your TV set responds to this switch over Monitor This button lets you switch between disc playback or the picture of the internal tuner TV channel Dimmer This button lets you change the brightness of the display to one of two levels or switch it off Back Return to previous menu on a video CD VCD This also works with some DVDs Title Chapter Choose the T Title C Chapter directly from the menu bar using V A If NFD appears in the display the index menu from a recorded disc or an introductory film will be shown In this case this function is not available Subtitle Select the subtitle language Audio Selecting the audio language For recording or during playback using the internal tuner MONITOR key select language or 2 Angle Select the camera angle Zoom Enlarge the picture Disc Manager Call up or cancel the Disc Manager EDIT For displaying the edit menu for DVD RW R discs for setting chapter markers for editi
25. a space press the button 1 To switch over to upper case characters press SELECT To erase a character press CLEAR 4 To end press OK Changing the rolls date 1 Select Date in the menu Roll Settings using V A and confirm with gt 2 Select the field you want to change using 4 gt 3 Change the date using V A or use the 0 9 buttons to enter the numbers 4 Confirm the changes with OK Calling roll overview directly 1 Select Overview in the Roll Settings using V A and confirm with OK 2 This will take you directly into the roll overview where you can make changes 63 ENGLISH 64 Deleting a roll WARNING This procedure cannot be reversed since the rolls will also be erased from the corresponding media Deleting a roll will also affect any album that uses pictures contained in this roll Therefore apply this function with particular care 1 Select Erase roll in the menu Roll Settings using V A and confirm with OK 2 If you really want to delete the roll press OK to confirm otherwise cancel the function using A 3 The overview of all rolls will then be displayed Changing album settings You can adjust various album settings to your individual needs You can change the name and date of an album Moreover you can copy or delete the album Changing the cover picture You can change the picture used to represent a certain album in the Album ove
26. and 4 until you have made the changes you want QO O OO O Save the new title with OK Storing name appears on the TV screen for confirmation Q To end press 4 Finishing editin If one or more titles have been edited a DVD player may still display the original titles You can prepare your DVD RW disc in such a way that a DVD player will be able to play the edited version 1 In the Disc info display press The Settings for menu appears on the TV screen 2 Select Make edits compatible using A or W and confirm with OK x Make edits compatible does not appear V y Your disc is already compatible There is no need for conversion To end press SYSTEM MENU Problem The screen displays This will take to show how long the process will last To confirm press OK Working appears on the TV screen A bar will move from left to right indicating progress 84 Managing the disc contents Finalising DVD R discs This feature is required to play back a DVD R disc in a DVD player Once the disc has been finalised no further recordings or changes can be made 1 In the Disc info display press The Settings for menu appears on the TV screen 2 Select Finalise disc using A or V and confirm with OK ENGLISH x Finalise disc does not appear v Either there is no DVD R disc inserted or the disc is already finalised To end press SYSTEM MENU x The Settings for
27. com
28. dispose of old batteries safely Please take the packaging to your local recycling centre This electronic equipment contains a large number of materials that can be recycled If you are disposing of an old machine please take it to a recycling centre When installing the recorder in a cupboard ensure there is a gap of approximately 2 5 cm I inch around the recorder to enable air to circulate freely and prevent overheating Make sure that air can circulate freely through the ventilation slots on the machine The machine should be placed on a firm surface Make sure that no objects or liquids enter the video recorder Do not place vases or similar on the DVD recorder If you spill liquid in the recorder immediately disconnect it from the power supply and call after sales service for advice Keep the DVD recorder away from radiators and other heat sources and protect from direct sunlight Do not place any combustible objects on the device candles etc Make sure that children do not place any foreign objects in any of the openings Cleaning the discs Some malfunctions frozen or distorted picture and broken sound for example are due to dirt on the disc To avoid such problems you should clean your discs regularly 1 Dirty discs should be cleaned with a soft cloth Always wipe from the middle to the edge 2 Do not use any solvents such as benzine thinners commercially available cleaning agents or antistatic s
29. field The status field shows the current operating mode status of the DVD recorder and the type of disc inserted This display can be disabled Disc type symbols DVD RW DVD R DVD Video Video CD No disc Error Operating mode symbols rec stop gt play u pause el pause 8x 8x gt slow Recording Stop Playback Playback Pause Record Pause Search forwards 8x speed Search backwards 8x speed Slow motion On screen information Tuner information box This field is located in the bottom left hand corner of the screen The aerial signal the TV channel and the TV channel name for the selected programme are displayed wr Current channel selected input socket T x No signal The TV channel is not available the additional device is not connected or ira L it is switched off Ya Copy protected signal Live picture in the Tuner information box Instead of the information about the aerial signal or the TV channel you can watch the picture of the selected TV channel or the signal on the input socket 1 In the system menu button SYSTEM MENU select the symbol CJ and confirm with gt 2 In the line Live source view select On to view this picture or Offto switch this picture off End with OK and then SYSTEM MENU Timer information box This box appears above the tuner information box When a timer recording is set it shows the timer icon and the start time or d
30. in a digital camera Check that your DVD drive on the computer can read DVD RVWV R discs v Check that your operating system of your computer support the file system UDF Universal Disc Format Install if necessary the required driver The DVD RW Rs were recorded in the format UDF 1 02 Video amp photo and UDF 1 50 Photo only v The file extension has to be JPG and not JPEG vThe disc should contain a subfolder DCIM Under that there should be folders so called Rolls Only pictures in these folders can be recognised v Pictures can also be stored in the root directory vif you create a CD ROM you have to store the photos in the same directory structure as on a DVD RW R If you use a CD ROM from a photo shop or something similar the whole disc will be searched for the photos on the basis of the disc format v The memory card should contain a subfolder DCIM Under that there should be folders so called Rolls Only pictures in these folders can be recognised vPictures can also be stored in the root directory vThe file extension has to be JPG and not JPEG 67 ENGLISH Manual recording Which discs can use for recording With this DVD recorder you can record on two types of DVD DVD RW This disc can be written to and then the contents deleted DVD R This type of disc can only be recorded once If you want to play this DVD in a DVD player it must be finalised using the Finali
31. is no access to the memory card This could damage the memory card You can recognise the access by A moving disc symbol lights up on the top left corner of the screen If you were not sure press in the Digital Photo Manager the button PHOTO This will take you directly into the Media menu screen You can also switch the DVD Recorder off with the STANDBY button 53 ENGLISH 54 Showing JPEG pictures from a roll The DVD recorder can read JPEG pictures stored on a CD ROM Picture CD memory card or a DVD and write them on a DVD RW R or memory card Please observe the following The file extension has to be JPG and not JPEG e These pictures must be stored in the root directories or in a subfolder called DCIM in folders These will be recognized by the DVD recorder as rolls comparable with a 35mm roll for cameras You can select the directories folders as rolls in the Media menu e This device is compatible with still pictures JPEG e It can only display DCF standard still pictures or JPEG pictures e g TIFF It cannot play back moving pictures Motion JPEG and other formats or pictures in formats other than JPEG or pictures associated with sound e g AVI files 1 Insert the medium you want to use CD DVD RW R memory card 2 Press PHOTO on the remote control The Media menu will appear 3 Use Wor A to select the medium you want to process disc or memory card If you d
32. is not yet available during the initial installation 1 Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press the SYSTEM MENU button on the remote control The menu bar appears Select A using lt oder P and confirm with W Select the amp symbol using W or A and confirm with P Select the line Video output using A or V and confirm with P eo 00 09 Select your setting with W or A Picture Which setting should choose Since YPbPr YUV signals are not transmitted simultaneously with S video Y C and video FBAS CVBS signals you can choose between the two types The RGB signal is switched off S video YPbPr Component Video YUV and S Video Y C CVBS YPbPrComponent Video YUV and Video FBAS CVBS TV shape Black level shift Off Video shift _ _ RGB attenuation en a Video output RGB CVBS With all other settings the signal is switched off at the COMPONENT VIDEO OUT sockets This will also be displayed as information on the screen For more information on the other settings read section Picture settings Video output in chapter User preferences O Confirm with OK 26 Installing your DVD recorder 9 Use a component video Y Pb Pr cable connect the three cinch sockets red blue green COMPONENT VIDEO OUT at the back of the DVD rec
33. menu does not appear a v The menu may not appear if the disc has been recorded on another DVD y recorder In this case use the Finalise disc feature in the TA menu under Features Problem The screen displays This will take to show how long the process will take 4 To confirm press OK Working appears on the TV screen A bar will move from left to right indicating progress Erase DVD RW disks In the Disc info display press The Settings for menu appears on the TV screen Select Erase disc using A or WV and confirm with OK This will erase all titles appears on the TV screen Press OK to confirm Settings for Philips1 Disc name Philips1 Protection Unprotected 4 Erase disc Press OK If you want to delete all the titles press OK to confirm Otherwise press lt 4 Erasing disc appears on the TV screen OO O O After deletion the index picture display shows the free space on the disc If the disc is empty already you cannot select Erase disc Managing the disc contents 85 Programming a recording TIMER 86 Use Programming a recording TIMER to automatically start and stop a recording at a later date The DVD recorder will switch to the right programme number and begin recording at the correct time With this DVD recorder you can pre programme up to six recordings within a period of one month To make a programmed recording your DV
34. on the DVD recorder remote control WAI T will appear in the display The DVD recorder compares the TV channels on the TV set and the DVD recorder If the DVD recorder finds the same TV channel as on the TV set it stores it at POI Installing your DVD recorder 29 ENGLISH 30 x NUTV will appear in the display The DVD recorder is not receiving a video signal from the TV set v Chech the connectors at both ends of the scart cable is Check your TV s operating instructions to see which scart socket is used Uz for video signals Y v If the problem persists you won t be able to use this feature Please read Sorting and deleting TV channels manually Problem Th He Wait until for example uc appears in the display Select the next programme number on the TV set e g 2 Confirm with OK on the DVD recorder remote control Deleting sortin You can delete incorrect TV channel sorting by pressing lt 4 Repeat steps to 12 until you have assigned all the TV channels from your TV set To end press SYSTEM MENU Automatic TV channel search During installation all available TV channels are searched for and stored If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder e g after moving house you can start this procedure again This will replace the stored TV channels with the new ones QOO OO
35. press SELECT To erase a character press CLEAR ENGLISH 3 To end press OK Changing the album date 1 Select Date in the Album Settings using V A and confirm with gt 2 Select the field you want to change using lt 4 gt 3 Change the date using V A or use the 0 9 buttons to enter the numbers 4 Confirm the changes with OK Calling the album overview directl 1 Select Overview second page in the Album Settings using V A and confirm with OK 2 This will take you directly into the album overview where you can make changes Copying an album Using this function you can Copy albums created on a memory card to a DVD RW R e Copy albums created on a DVD or a CD ROM to a memory card This will also store the pictures used for the album 1 Select Copy album second page in the menu Album Settings using V A and confirm with OK x It is not possible to select Copy album V v There is no media in the DVD Recorder to store an album Roll Insert a DVD RW R disc or insert a memory card The Digital Photo Manager 65 66 Erasing an album It is also possible to erase an album The pictures within an album will not be deleted and shall remain on the storage medium disc or memory card unchanged 1 Select Remove album second page in the Album Settings using V A and confirm with OK 2 If you really want to erase the album press OK to conf
36. section on Changing to another title chapter in Playback O Use the STOP W button on the remote control or W on the machine to stop the recording MENL LIPIT will appear on the display The DVD recorder is writing the list of contents Wait until the message disappears from the display The recording is then complete x The display will read 250 ERR y Recording could not be completed correctly because of a disc error Check the disc and clean it if necessary Making recordings on DVD R discs compatible If you want to play back the recording on a DVD player you need to finalise the disc in the DVD recorder You can prepare your DVD for use in a DVD player using the Finalising feature See Finalising DVD R discs in Managing the disc contents 1 During recording press PAUSE I for example to avoid recording the commercials 2 To continue recording press REC OTR End recording To end the recording press the STOP W button Wait until MEN disappears from the display 70 Manual recording Recording with automatic switch off OTR one touch recording O 27 53 Insert a disc If necessary use the MONITOR button on the remote control to switch to the internal tuner in the DVD recorder ENGLISH Use CHANNEL or CHANNEL to select the programme number channel name you want to record Press REC OTR on the remote control Each time you press REC OTR you will add 30
37. the TV channels appear on your TV set This function changes the order of the TV channels stored in your DVD recorder to match the order on the TV set This only works if the DVD recorder EXT 1 TO TV I O socket and the TV set are connected with a scart cable My TV set has Easylink If your TV set supports Easylink TV channels will be stored during initial installation in the same order as they appear on the TV set To store the TV channels in a different order you ll need to change the order on the TV set When you start the Follow TV function the information is transferred again from the TV set Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press the SYSTEM MENU button on the remote control The menu bar appears Select TA symbol with lt 4 or gt Select Installation using W or A and confirm with P Select line Follow TV with Wor A and confirm with the gt button Confirm the message on the screen with OK y 77 the DVD recorder display will appear in OOO OO 6 Select programme number l on the TV set xI cannot switch my TV set to programme number l aK os v If you have connected additional devices to the EXT 2 AUX I O socket Y please disconnect these devices Other connected devices may have switched the TV set to the programme number of the scart socket Problem O Confirm with OK
38. the remote control You can also use the 4 gt A VW buttons or number buttons 0 9 to select a menu item and confirm with OK You can also access the menu using DISC MENU on the remote control For further information see Playing a DVD video disc When a DVD RW is played back the index overview appears Using V A Kd PPI select the title you want to play back Confirm with OK For further information see Playing back a DVD RW R Disc If playback does not start automatically press PLAY gt For further information see Playing an audio CD If the ll symbol appears on the screen start playback by pressing PLAY If a menu appears on the screen use the remote control buttons indicated on the screen to select the menu option you want PREV M lt NEXT PP or with the number buttons 0 9 For further information see Playing a Super Video CD Playing a DVD video disc 1 If playback does not start automatically press PLAY This will appear on the display title chapter number elapsed time 2 To stop playback press STOP Ml on the remote control or W on the DVD recorder 3 To eject the disc press OPEN CLOSE on the front of the DVD recorder 39 Playing a DVD RW R disc 1 If the disc is write protected or a finalised DVD R disc playback starts automatically 2 If playback does not start automatically use the W or A button to CH 4 ANN select the title you want to play on
39. three minutes If finalising has been successful the index screen will appear v The function Automatic Satellite Recording is switched on If the DVD Recorder is switched off the symbol SAT appears in the bottom left corner of the display If the DVD Recorder is switched on instead of the clock _ appears with a red background If I switch on a device in the Tuner Info Field bottom left corner of the screen connected to the EXT 2 AUX I O socket the To switch off the function procede as follows 2 P YSTEM MENU DVD Recorder starts a ce k l 9 Select with V the line Record settings second menu page recording Select in line Sat record with lt Off instead of EXT2 Confirm the change with OK End with SYSTEM MENU 105 AEZ ZO OO LL UGA PUII sa 222 3103 605 20991 3401 000 PHILIPS NORGE AS Sandstuveien 70 PO Box I Manglerud N 0612 Oslo NORWAY Phone 2274 8250 OY PHILIPS AB Sinikalliontie 3 02630 Espo Helsinki FINLAND puh 09 6158 0250 PHILIPS KUNDTJANST Kollbygatan 7 Akalla 16485 Stockholm SWEDEN Phone 08 5985 2250 PHILIPS POLSKA AL Jerozolimskie 195B 02 222 Warszawa POLSKA Tel 022 571 0 571 PHILIPS SERVICE V Mezihori 2 180 00 Prage CZECH REPUBLIC Phone 02 3309 330 PHILIPS Iberia S A C Martinez Villergas 49 28027 MADRID SPAIN Phone 902 113 384 IAINZ EAAAZ AEBE 25H2 MAPTIOY 15 177 78 TAYPOZ AOHNA TnA 0 0800
40. title This video title will be recorded automatically after the last recording No existing titles will be overwritten Ensure that there is enough space on the disc O To end press DISC MENU Storing rolls albums on a DVD RW R If you want to store the JPEG pictures from the rolls albums on a DVD RW R you must first prepare the disc Preparing a DVD RW R Press PHOTO on the remote control The media menu will appear Use VW or A to select the disc alone as a medium If you did not insert a disc a warning sign will appear above the symbol on the left hand side of the screen Press P gt Select Media settings using W and confirm with OK OOO OO Use W or A to select whether you want to store Photo only or Video amp photo together on this disc Please note that DVD R s or memory cards can only be prepared for Photo only What is the difference Photo only The DVD RW R will be prepared so that only pictures can be stored on the entire disc 4 4 GB Video amp photo On the DVD RW R a space 650 MB will be reserved for storing pictures additionally to movies So you can store the appropriate photos after the movie A DVD R can not be prepared for Video amp photo How long does this process last To prepare a disc for Video amp photo a new DVD RW has to be formattet first This can take up to 25 minutes You can speed up the process if you use a prerecorded disc Confir
41. to the audio output on the camcorder Choose LA f as a programme number for this input Connecting audio devices to the analogue audio sockets Two audio output sockets AUDIO L R OUT are located on the back of the DVD recorder audio signal output left right These can be used to connect the following a receiver with Dolby Surround Pro Logic a receiver with two channel analogue stereo Can use the Phono input on my amplifier This socket input on the amplifier is designed only for record players without preamplifiers Do not use this input for connecting the DVD recorder The DVD recorder or the amplifier may be damaged as a result Connecting additional devices Connecting audio devices to the digital audio sockets ae At the back of the DVD recorder there are two digital audio output sockets OPTICAL T AUDIO OUT for an optical cable and COAX OUT for a coaxial cable Cinch cable a e 0 DIGITAL These can be used to connect the following Z AUDIO OUT an AIV receiver or an A V amplifier with a digital multi channel sound decoder kej e a receiver with two channel digital stereo PCM Digital multi channel sound Digital multi channel sound offers the best possible sound quality You will need a multi channel A V receiver or amplifier that supports at least one of the audio formats of the DVD recorder MPEG2 Dolby Digital and DTS Consult the operating instructions for your receiver t
42. until you have found the TV channel you are looking for Problem 9 Using lt or P in Programme number select the programme number you want to use for the TV channel e g OT How can change the namel of a TV channel In TV channel name press P Select the desired character position using lt or gt Change the character at the desired position with W or A Select the next character position in the same way Confirm with OK How can I change the TV system of the TV channel In TV system use lt or P to select the TV system that produces the least distortion of picture and sound What is NICAM NICAM is a digital sound transmission system Using NICAM you can transmit either stereo channel or 2 separate mono channels However if reception is poor and the sound distorted you can turn off NICAM In NICAM select Off using 4 or P How can improve the automatic process for storing channels To change the automatic process for storing channels fine tuning select Fine tuning Using lt or you can try to fine tune the TV channelmanually 10 Press OK to store the TV channel To search for other TV channels begin again at O To end press SYSTEM MENU 28 Installing your DVD recorder Sorting TV channels automatically Follow TV When the automatic channel search function is activated the TV channels are stored in a specific order This may differ from the order in which
43. 3122 1280 DVDR 77 00 02 PHILIPS Philips Austria GmbH Triesterstrasse 64 1101 Wien AUSTRIA Tel 0810 00 12 03 PHILIPS INFO CENTER Alexanderstrasse 20099 Hamburg GERMANY Tel 0180 535 6767 SERVICE CONSOMMATEURS PHILIPS BP O101 75622 Paris C dex 13 FRANCE Phone 0825 889 789 PHILIPS ELECTRONICS IRELAND LIMITED Consumer Information Centre Newstead Clonskeagh DUBLIN 14 Phone 01 7640292 PHILIPS CONSUMER ELETRONICS Servizio Consumatori Via Casati 26 20052 Monza Milano ITALY Phone 800 820026 PHILIPS MARKASZERVIZ Kinizsi U 30 36 Budapest 1119 HUNGARY Phone 01 382 1700 PHILIPS PORTUGUESA S A Consumer Information Centre Rua Dr Antonio Loureiro Borge nr 5 Arquiparque Miraflores P 2795 L A VEHLA PORTUGAL Phone 352 1 4163063 PHILIPS CE The Philips Centre 420 430 London Road Croydon Surrey CRI 3QR UNITED KINGDOM Phone 0870 900 9070 PHILIPS KUNDECENTER Frederikskaj 6 DK 1780 K benhavn V DENMARK Tlf 808 82814 PHILIPS REPRESENTATION OFFICE UI Usacheva 35a 119048 MOSCOW RUSSIA Phone 095 937 9300 PHILIPS INFO CENTER Fegistrasse 5 8957 Spreitenbach SUISSE Tel 0844 800 544 PHILIPS CUSTOMER CARE CENTER Twee Stationsstraat 80 80 Rue des Deux Gares 1070 BRUSSEL BRUXELLES BELGIUM for BENELUX Tel 070 222 303 PHILIPS CONSUMENTENLIJN t a v betreffende afdeling Postbus 102 5600 AC Eindhoven NETHERLANDS Phone 0900 8406 www philips
44. Component Video input Output sockets DIGITAL AUDIO OUT COAX OUT OPTICAL AUDIO OUT Coaxial digital audio output Optical digital audio output The symbols on your DVD recorder display Ra Raa These symbols can light up on your DVD recorder display IHINNHNNHNNNNNHNNNHNH HNHHHNHNNH SAT TIMER O VPSIPDC LANGI gage SAT TIMER o VPS PDC LANG II ENGLISH Multi function display text line e Clock e Disc title playing time e OTR switch off time e Title name e Display of the programme number of the TV channel playing time channel name function e Display of information and alerts Disc bar Displays the current position on the disc disc pointer Play Record Single flashing segment at the current position Pause Flashing segment on both sides of the current position Stop Illuminated segment at the current position An automatic recording from a satellite receiver SAT recording has been programmed A recording timer has been programmed A remote control signal has been received Video programming system programme delivery control A VPS or PDC code will be transmitted for the selected TV program During playback a 2 channel tone was detected or a 2 channel tone was received l or Il lights up depending on which sound channel has been selected button AUDIO Messages in the DVD recorder display The following messages may appear in your DVD recorder display 15
45. D recorder needs to know the date you want to make the recording the programme number of the TV channel the start and stop time of the recording VPS or PDC on or off the recording mode picture quality M1 M2 M2x M3 M4 M6 M8 Fit to space Recording You can select also the recording mode FR With these setting the recording mode bit rate will be automatically calculated to use the complete empty space title Empty If the empty space is too small the recording will be stopped to prevent the following titles from being overwritten This information is saved in a TIMER block Before you begin make sure the clock is set If the clock is not set the Time Date menu will appear when you press the TIMER button What is VPS PDC VPS Video Programming System PDC Programme Delivery Control are used to control the start and duration of TV channel recordings If a TV programme starts earlier or ends later than was scheduled the DVD recorder will then turn on and off at the correct time What do I need to know about VPS PDC e Usually the start time is the same as the VPS or PDC time If a different VPS PDC time is indicated e g 20 15 VPS PDC 20 14 the VPS PDC time 20 14 must be entered exactly to the minute during programming If you want to programme a time that is different from the VPS or PDC time you must switch off VPS or PDC e Only one TV program of a TV channel can
46. DVD Recorder is switched off button STANDBY the clock display is also switched off Normal If the DVD Recorder is switched off button STANDBY the clock display is visible Demo mode If the DVD recorder is switched off with the STANDBY button a list of the most important features is shown in the display Display You can change the brightness of the display on the DVD recorder This setting only affects the DVD recorder when it is switched on You can also adjust this setting with the DIM button on the remote control Bright The display appears with normal brightness Dimmed The display appears less bright Off The display is switched off Remote Control settings In this menu you can set the remote control type to which your DVD recorder should respond DVD player The DVD recorder responds to the supplied remote control and the remote control of a DVD player remote control code RC 6 Choose this setting if your Philips TV remote supports DVD functions DVD recorder The DVD recorder only responds to the supplied remote control User preferences Access control Auto resume User preferences Disc features Enter code On Disk feature menu In this menu you can make the changes that relate to the disc Access control Please read the next chapter on Access control child lock Auto resume If playback of a pre recorded DVD vide
47. FF To activate this function proceed as follows Press SYSTEM MENU while the Super Video CD is inserted Select TA using lt 4 or P Select line Features using V or A and confirm with P Select On in line PBC using V or A Confirm with OK and end with SYSTEM MENU vYour TV set is not properly adjusted Disc is dirty Clean the disc vSometimes the picture may be temporarily distorted This is not a defect of your DVD recorder v The TV channel you want to record is not stored or you selected the wrong programme number Check TV channels stored Disc write protected recording protected Remove write protection or change the disc For more information please see Preventing accidental erasing of discs in chapter Manual Recording vAn already finalised DVD R has been inserted Change disc vYou have programmed the wrong time or date Check time date vif the time and date are wrong despite setting them by hand you can switch SMART CLOCK Clock preset off See Setting the time date in Installing your DVD recorder vYou have not set the TIMER properly Check the programmed recordings TIMER block v Locked disc inserted Remove disc lock vAn already finalised DVD R has been inserted Change disc v VPS PDC switched on but VPS PDCtime wrong Enter VPS PDCtime exactly to the minute Check the aerial 103 PROBLEM The wrong TV channel was decoded recorded after you pro
48. O TV I O scart socket You will then see the picture from the additional device on your TV set even if the DVD recorder is switched off The TV DVD button on the remote control allows you to switch between playback through the EXT 2 AUX I O scart socket and playback from the DVD recorder The DVD recorder must be connected directly to the TV set EXT 1 TO TV I O socket directly to the TV set If there is a video recorder in between the picture quality may be poor because of the copy protection system built into the DVD recorder Connecting a video recorder DVD player You can connect a video recorder or a DVD player to the EXT 2 AUX I O input socket If you already have an external receiver satellite receiver set top box cable TV box connected to this socket you can connect the video recorder to the VCR TO VCR socket of the external receiver You can also use the front sockets S VIDEO VIDEO and the left AUDIO right audio sockets Please note Most prerecorded video cassettes and DVDs are copy protected If you try to copy them you will see the message CUF4 PRUT on the DVD recorder s display x When copying video cassettes the display on the DVD recorder y Check that the bi is plugged in firmly v If a recording is made from a video recorder change the tracking on the video recorder The DVD recorder may not be able to recognise the video input signal if this signal is poor or does not comply with relevant stan
49. Read the instruction manual of the receiver on the signals available at the sockets If you are satisfied with the picture quality of the VCR TO VCR socket you can also use this socket 2 If your external receiver offers several options for the signal available at the TV TO TV socket choose the RGB setting Connecting additional devices only via aerial cable If you want to connect additional devices e g satellite receiver only via aerial cable please observe the following The DVD Recorder must be connected directly to the TV set If there is a video recorder or an additional device in between the picture quality may be poor because of the copy protection system built into the DVD Recorder The additional device satellite receiver must be connected before the DVD recorder additional device DVD recorder TV set Only the TV set must be connected to the TV OUT socket e If there is interference in the picture when the additional device is switched on a TV broadcaster may be transmitting on the same channel or a channel very close to that of the additional device e g TV broadcaster on channel 45 additional device satellite receiver also on channel 45 In this case change the channel of the additional device satellite receiver Consult the instruction manual of the additional device You must also store this channel on the DVD recorder to be able to record TV programmes from the addit
50. Table of contents BF introduction Eee oO Dear Philips Customer c ciceiancnnn bas aan aiaen 3 PRS RN a AP E A E E 6 Technical Jita ene are 6 P e E E A EE A EE T 6 ole elai EE E E E E ERE 7 Cleaning Me disiri E EE ARA 8 Special functions of your DVD recorder ssss sseseessssssssrereereeresssssssssreeeereeeees 9 El connecting the DVD recorder Il Preparing the remote control for Operation cesessessesseeseeseeseeseess II Connecting your DVD recorder to the TV set sssssssssessssessssseeseers II Connecting with a scart cable and Easy Link ssesssecssecsteeseeesseeseees 12 Connecting with a scart cable without Easy Link sessssecseecseeeseees 14 Connecting with an S Video Y C cable eesessescsssssesssestessseseesseenente 15 Connecting with video CVBS cable esssssesseseeseseeeseessesssssesssenseees 16 Ef Connecting additional devices 18 Connecting additional devices to the second scart socket 18 Connecting a video recorder DVD player 0 sssssssssssssestestssseesteestenes 18 Connecting an external receiver satellite receiver set top box sle e BOG asd A EE E E E E E E 19 Connecting additional devices only via aerial cable oe eeseeseeeeeees 19 Connect camcorder to the front sockets sessssssessssssssssessessesseesseees 20 Connecting audio devices to the analogue audio sockets 0 20 Connecting audio devices to the digital audio sockets 0 00
51. V screen Divide title Press EDIT to exit Once the revision has been completed successfully the DVD recorder reverts to the index overview Dividing titles You can divide a title into several sections titles of any size Each of these sections titles is identified by its own index Note This division cannot be undone Can divide titles on DVD R discs As recordings on DVD R discs cannot be overwritten it is not possible to divide titles on DVD R discs While the relevant title is playing press EDIT on the remote control The Favorite Scene Selection menu appears on the TV screen Favorite Scene Selection Select Divide title and confirm with the OK button New index picture Press OK New background oO If you are sure press OK to start the process Dividing title appears on the TV screen Divide title Q Wait until the new title is displayed with an index picture in the index Press EDIT to extt picture overview The process of splitting the title is now complete Managing the disc contents 8l Editing recording titles name Settings for title Charly 1 y Name Play full title Erase this title Settings for title Charly 1 Name Play full title Erase this title Charly 1 Charly 1 Press OK Some TV stations transmit the title name of a programme In this case the name will be included automatically e g ROCKY Otherwise the only the
52. VD R discs are only marked as deleted Deleted title will appear in the display instead of Empty title During playback the deleted title is skipped The space used for this title cannot be used again as the title has not been physically deleted Once the disc has been finalised no further changes can be made Disc settings Philips1 This screen appears beforethe first title and contains general information about the current disc 00 35 59 used Fri15 02 2003 You can e change the name of the disc e activate or deactivate write protection on the disc DVD playback e Finish editing make the disc DVD compatible e finalise a DVD R e delete a DVD RW PAL To get to this display proceed as follows 1 Press the STOP W button or during playback press DISC MENU 2 Select the first title with A or press STOP E 3 Press the A button The disc info display will appear Managing the disc contents 83 Changing the disc name In the Disc info display press The Settings for menu appears on the TV screen Select Disc name using A or V and confirm with P Settings for Philips1 Using gt or lt select the position where the letter number icon is to be changed re entered y Disc name gt Philips1 Protection Unprotected Erase disc Change the icon using A or W You can switch between upper and lowercase using SELECT You can delete the character using CLEAR Repeat 3
53. VIDEO socket has priority S VIDEO Yellow socket VIDEO White red socket left AUDIO right DV IN S Video socket Connection of SVHS Hi8 camcorders or SVHS Hi8 video recorders programme number LH 1 Video input socket Connection of camcorders or video recorders programme number CF 1 Audio input socket left right Connection of camcorders or video recorders programme number Litt 1 i Link DV socket digital video input IEEE 1394 FireWire Connecting a digital camcorder or other suitable device programme number LAME Back of the device v MAINS ANTENNA IN TV OUT EXT 2 AUX I O EXT 1 TO TV I O Mains socket Connection to the mains supply 230V 50Hz Aerial input Connection of the aerial Aerial output Connection of the TV set Scart socket 2 Connection of an additional device satellite receiver set top box video recorder camcorder etc RGB input Scart socket I Connection of a TV set RGB output Output sockets AUDIO VIDEO OUT S VIDEO Y C OUT VIDEO CVBS OUT AUDIO L R OUT COMPONENT VIDEO OUT S Video output Connection of an S Video compatible TV set Video output yellow socket Connecting a TV set with a video input CVBS Composite Video Analogue audio output white red socket Connection of a TV set with audio input sockets or connection of an additional device Component Video output red blue green socket Connection of an additional device with
54. View Link Q Link Smart Link Megalogic Datalogic and you wish to use a scart cable Connecting with a scart cable without Easy Link If your TV set is not equipped with Easy Link Cinema Link NexTView Link Q Link Smart Link Megalogic Datalogic and you wish to use a scart cable Connecting with an S Video Y C cable If your TV set is equipped with an S Video SVHS socket Connecting with video CVBS cable If your TV set is equipped only with an video CVBS socket Connecting with a scart cable and Easy Link Your DVD recorder can exchange information with your TV set using Easy Link Your TV channels can also be transferred in the same order from your TV set to your DVD recorder using Easy Link Please see your TV s operating instructions Have the following cables ready an aerial cable l supplied a mains cable 2 supplied a special scart cable 3 suitable for Easylink Switch off your TV set Remove the aerial cable plug from your TV set Insert it into the ANTENNA IN socket at the back of the DVD recorder 8 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set O Plug in a full pin scart cable all 21 contacts wired into the scart socket EXT 1 TO TV I O at the back of the DVD recorder and the corresponding scart socket suitable for Easyli
55. a video recorder that transmits only video CVBS FBAS signals through the scart cable recordings via scart socket EXT 2 AUX I O may be made in black and white Therefore use this setting with caution CVBS only Only the video CVBS FBAS signal is transmitted regardless of the video signals RGB Y C on the scart sockets This setting is selected automatically when no RGB or S VIDEO signal is detected at the scart socket When selecting the settings S video only or CVBS only the RGB signal is switched off User preferences 93 Sound settings Depending on which audio outputs are used you can select the settings in this menu If you only use the analogue audio output AUDIO L R OUT select the settings Off in the Digital output menu Digital output You can select one of the following settings for devices that are connected to the COAX OUT or OPTICAL AUDIO OUT sockets Digital output Analogue output Night mode All Dolby Digital and DTS signals are fed unaltered to the digital output MPEG 2 multi channel signals are converted to PCM Pulse Code Modulation For receivers amplifiers with digital multi channel sound decoders PCM only Dolby Digital and MPEG 2 multi channel signals are converted to PCM Pulse Code Modulation For receivers amplifiers without digital multi channel sound decoders Off Digital output switched off For devices with analogue audio input
56. acked separately in the original DVD recorder packaging You must install the batteries in the remote control before use described in the following section ENGLISH 1 Take the remote control and the enclosed batteries 2 batteries 2 Open the battery compartment insert the batteries as shown and then close the battery compartment The remote control is now ready to use Its range is approximately 5 to 10 meters Aim correctly In the following sections you will need the remote control for the first time 2 Aim the remote control at the DVD recorder and not at the TV set Ti a Connecting your DVD recorder to the TV set The necessary cable connections must be made before you can record or playback TV programmes using your DVD recorder Connect the DVD recorder directly to your TV set If there is a video recorder in between the picture quality may be poor We recommend that you use a scart cable to connect your TV set and DVD recorder What is a scart cable The scart or Euro AV cable serves as the universal connector for picture sound and control signals With this type of connection there is practically no loss of quality in picture or sound transmission Connecting the DVD recorder E easy DONE When you install your DVD recorder for the first time select one of the following options Connecting with a scart cable and Easy Link If your TV set is equipped with Easy Link Cinema Link NexT
57. ality in input field End Select the End input field using gt Use SELECT to select the recording mode If all information is correct press the OK button The programming information is stored in a TIMER block To end press TIMER The disc you have inserted will be checked Search the position on the disc where the recording should begin OO 8 9 Switch off with STANDBY The programmed recording will only function properly if the DVD recorder has been switched off using the STANDBY button If any of the TIMER blocks are in use TIMER will light up on the recorder display Programming a recording TIMER 89 How to change or delete a programmed recording TIMER 1 Switch on the TV set If required select the programme number for the DVD recorder Press TIMER on the remote control The programming mode selected last is marked Select Timer List using V or A and confirm with P o 8 Timer Select the programmed recording TIMER you want to check change Timer List or delete with W or A VPS Rec Date Prog Start PDC End Mode 01 BBC1 20 15 21 30 M2 Delete programmed recording Press the CLEAR button Confirm with OK Timer Cleared will briefly appear on the TV Total record time 01 15 screen To change To exit appears rather than the displayed values Press gt Press TIMER To end press TIMER O Press P Select the input field with lt or P gt
58. an the time entered Enter a new time or cancel the function by pressing SYSTEM MENU Problem O Playback starts at the time you entered Repeat Shuffle play You can mark entire sections or the whole disc for endless playback Depending on the type of disc DVD video DVD RW video CD you can select a chapter title or the entire disc 1 Select the desired chapter title or the entire disc and start playback 2 During playback press PLAY MODE By pressing PLAY MODE again you can chose from the following options Ae repeat chapter DVD only repeat track title reran repeat entire disc Video CD Audio CD only antie 4 Shuffle Display disappears no repeat he 3 To end the repeat press the STOP W button You can also keep pressing the PLAY MODE button until the displays disappear 45 ENGLISH 46 Repeating a passage A B You can repeat a particular passage within a title chapter You need to indicate the start and end of the passage 1 During playback press PAUSE II at the start point You will see a still picture Keep pressing PLAY MODE until 4 appears on the screen The start point is now saved Press PLAY to start playback 3 When the end point is reached press OK amp 5 appears on the TV screen Playback now takes place within these points To end the repeat press the STOP W button You can also keep pressing the PLAY MODE button unt
59. and confirm with OK Repeat steps O to 14 until the album contains all the desired pictures 58 The Digital Photo Manager The Digital Photo Manager Changing the picture order within an album You can change the order of the pictures within an album as you wish The order of the pictures of the rolls remains unchanged 0000 00 O Select Albums in the Media menu using W or A and confirm with gt An overview of the albums you already created will appear ENGLISH Press P to select the desired album The Album Settings menu will appear Select Overview by pressing W The Overview option can be found on the second menu page Confirm with OK Use V A lt P to select the picture you want to move to a different position Press SELECT The picture frame appears in a different color Keep pressing A until the menu bar is highlighted Select Move using lt or P and confirm with OK Use V A lt PB to select the position before which the desired picture is to be moved Confirm with OK The picture will be inserted Editing pictures in an album You can also erase rotate or hide pictures in an album These changes will only affect the album The pictures on the disc or the memory card will remain unchanged Select the pictures you want to change in the Album overview using SELECT Keep pressing A until the menu bar is highlighted Select one of the displayed functions wi
60. ant to add child proof discs you need to enter the PIN code Adding a disc to the Disc Manager You can only add DVD RW or DVD R discs to the Disc Manager since other discs do not hold any information on the titles or lengths of the recordings These discs have to be at least once recorded in the DVD Recorder A table of content have to be available DVD R discs can also be finalised Other discs cannot be added to the Disc Manager Recordings are saved automatically On a disc that has been added to the Disc Manager you can make new recordings as often as you like using this DVD recorder The titles of these recordings will be stored in the Disc Manager automatically 1 Switch on the TV set If required select the programme number for the DVD recorder Disc Manager DM Find title Browse discs Remove a disc Add current disc Disc Manager co4 Disc number001 Disc number001 Next free disc number 001 To exit press DM Find title Browse discs Remove a disc Add current disc c04 Disc Manager Disc number001 Disc number001 Next free disc number 001 Disc Manager DM To exit press DM Insert a DVD RW R disc in the DVD recorder picture screen in the top left hand corner v You have inserted a disc that has already been registered by the Disc Manager Problem When I insert a disc see a number on the screen in the index ds Press th
61. ary use the MONITOR button to switch to the internal tuner O Press the SYSTEM MENU button on the remote control The menu bar appears Select TA symbol with lt 4 or gt Select Installation using W or A and confirm with P Select Manual search using V or A and confirm with P Select Decoder using V or A Select On with 4 or P 00000 Oo How do I switch the decoder off again Use P to select Off in the Decoder line on the screen Decoder off 10 Confirm with OK To end press SYSTEM MENU Your decoder has now been allocated to this TV channel 25 ENGLISH Connection using a component video Y Pb Pr YUV cable Component video Y Pb Pr is the highest quality picture transmission option This is achieved by dividing the video signal into a luminance signal Y and two colour difference signals red minus luminance V and blue minus luminance U As a rule Cr or R Y is used to describe the red difference signal and Cb or B Y the blue difference signal These signals are transmitted through separate lines The connectors of this cable and the corresponding sockets are usually green luminance blue Pb Cb B Y and red Pr Cr R Y If you choose this type of connection the DVD recorder must already be connected and completely installed initial installation complete Switching of the signal to the COMPONENT VIDEO OUT sockets is carried out in a menu that
62. ate of the first programme to be recorded If no timer recording is scheduled the current time is displayed This box disappears during playback of a disc or after a recording starts However you can access it during an OTR recording by pressing SYSTEM MENU g Timer starts on the day time shown D OTR recording runs until the stop time displayed 23 Current time No timer event programmed On screen information 37 Playback General notes on playback With this DVD recorder you can play back the following systems DVD Video e Super Video CD Disc e DVD RW Disc DVD R Disc e DVD RW video mode finalised DVD R CD R CD RW Audio CD e MP3 CD e Picture CD JPEG data You can operate the video recorder using the remote control or the buttons on the front of the DVD recorder x The display will read F N v The child lock has been activated for the inserted disc Read the sections on Child lock and Releasing a disc in the chapter on Access control child lock x The menu on the screen is showing an X v Some DVD discs can be manufactured so that certain steps are required before the disc can be played or so that only limited operation is possible during playback When an X appears on the screen the selected feature is not possible x The screen is showing regional code information Since DVD films are not normally released in all parts of the world at t
63. ay back a recording saved in the Disc Manager 1 Press DISC MANAGER on the remote control 2 Select Find title using W or A and confirm with P 3 A list of the titles of all recordings stored in the Disc Manager DM Disc Manager Find title Title Date Duration will appear on the TV screen Charly1 01 01 03 0 28 What do the displays on the screen mean Title Title Date Date of the recording Duration Length of the recording Page1 1 To select title press OK Select the title that you want to play back with W or A Confirm with OK The DVD recorder will jump to the start of the selected recording xI see the message Insert disc number on my screen v The selected recording is located on the Disc Manager disc with the displayed disc number Please insert the appropriate disc After a brief check the DVD recorder will jump to the start of the selected recording Problem Searching discs You can easily search for the title of a recording stored in the Disc Manager To do this the appropriate disc does not have to be in the DVD recorder 1 Press DISC MANAGER on the remote control Select Browse discs using V or A Manager disc used 3 Confirm with gt The screen will show the contents of the last Disc Use Aor W to select a different disc number if necessary and Disc Manager confirm with gt Browse discs Pige number Title Date Duration Charly1
64. be controlled using VPS PDC at a time If you want to record two or more TV programmes on a TV channel using VPS PDC you will need to programme these as two separate recordings e Since the DVD recorder requires a certain lead time for getting the disc up to speed and positioning the laser before recording can start it is possible that the recorder will miss the first few seconds of a TV show recorded with VPS PDC In this case disable VPS PDC and enter a start time one minute earlier Programming a recording TIMER Programming recordings with the ShowView System Thanks to this programming system you no longer need to tediously enter the date programme SHOWVIEW number start and finish times All the information needed by the DVD recorder for programming is contained in the ShowView programming number This 9 digit ShowView number is found in most TY listings magazine 4 Timer ShowView system ShowView number Mo Fr Weekly To store Press SELECT Press OK Programming a recording TIMER ENGLISH Switch on the TV set If required select the programme number for the DVD recorder Press TIMER on the remote control The programming method selected last is marked Select ShowView system using V or A and confirm with P Enter the entire ShowView number This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazi
65. be played back if the recording was made in video mode and the recording was finalised Audio CD Compact Disc Digital Audio Super Audio CD Only plays the CD layer of a hybrid SACD disc Video CD Format 1 0 1 1 2 0 Super Video CD CD R CD Recordable Audio MP3 content CD RW CD Rewritable Audio MP3 content Picture CD CD R RW with JPEG content Regional code Since DVD films are not normally released in all parts of the world at the same time all DVD players have a specific regional code Discs can be given a regional code If the regional codes differ between the player and the disc playback is not possible DVDs must be marked ALL for all regions or 2 for region 2 to work in this machine If the DVD is marked with a different region it cannot be played in this DVD recorder The number within the globe represents the region Regional code 2 represents Europe Japan South Africa Middle East incl Egypt Technical data Voltage 220 240V 50Hz Power consumption 30W Power consumption standby less than 3W clock display off Measurements in cm W HID 43 5 7 6 33 5 Disc tray closed 47 2 disc tray open Weight without packaging approx 4 0kg Power outage no power Channel and timer information remain saved for up to year the time is saved for up to 12 hours Operating position maximum 10 degree inclination in all directions Ambient temperature 5 C 35 C Humidity 25 75 Acce
66. buttons 0 9 on the remote control to select the number of the title chapter can also use the repeat functions PLAY MODE button Playback 4l Playing a Super Video CD Super Video CDs may be equipped with PBC Play Back Control This means that special playback functions menus can be directly selected The video CD must be PBC compatible see CD case PBC is active in the default settings 1 Insert a Super Video CD If the W symbol appears in the display start playback by pressing PLAY gt 2 If a menu appears on the screen use the remote control buttons indicated on the screen to select the menu option you want PREV 4 NEXT PP or with the number buttons 0 9 If a PBC menu consists of a list of titles you can select a title directly Use RETURN to go back to the previous menu O O Stop playback using STOP W 42 Playback playback features Changing to another title chapter If there is more than one title or chapter on a disc you can change to another title or chapter as follows However if there are several chapters within a title these will be selected The title can then still be selected via the menu bar 1 During playback press PPI to go to the next title chapter Press 4 to return to the start of the current title chapter Press lt twice to return to the start of the previous title chapter ENGLISH Use the T C title chapter button 1 Press T C title chapt
67. by Laboratories Transmission standard for 5 1 channels from Digital Theatre Systems Inc This is the second most wide spread system after Dolby Digital This product contains copy protection technology which is protected by US Patent Nos 4631603 4577216 4819098 and 4907 093 and other intellectual property rights Use of this copy protection technology from Macrovision Corporation requires the approval of Macrovision It is intended exclusively for home use and other limited pay per view applications unless Macrovision approves some other use in writing Modifications to the equipment removal of components and reverse engineering are prohibited Simple programming system for DVD recorders Simply enter the programming number associated with your television programme You will find this number in your favourite listings magazine ShowView is a registered trademark of Gemstar Development Corporation ShowView is manufactured under licence from Gemstar Development Corporation Enter the serial number here You will need it for service queries or if your machine is stolen The serial number PROD NO is printed on the type plate at the back MODEL NO PHILIPS PROD NO This product complies with the requirements of the following directives and guidelines 73 23 EEC 89 336 EEC 93 68 EEC Introduction Connecting the DVD recorder Preparing the remote control for operation The remote control and its batteries are p
68. cally sets the time and date using the information transmitted by the TV channel Normally the TV channel stored at programme number POI is used In the Clock preset line you can select the programme number channel name whose TV channel transmits this information If the time date is not displayed correctly you need to choose the Off setting in the Clock preset line and set the date and time manually 1 Press SYSTEM MENU on the remote control The menu bar appears Select TA symbol with lt 4 or gt Select Installation using W or A and confirm with Select Time Date using W or A and confirm with Check if the time in Time is correct If required change the time o O 8090 Installation Time Date with the number buttons 0 9 on your remote control Time 20 00 f Vs Year 2003 Check Year Month and Date in the same way To move between Month 01 the fields ue Wor A Date 01 Clock preset 01 x Time date is displayed incorrectly despite manual setting v With SMART CLOCK time date is transferred from the TV channel saved To exit press on POI and automatically corrected You can either enter another TV channel for transferring the data or disable the function In the line Clock preset select the relevant TV channel with lt or P gt To disable select Off SYSTEM MENU Q Check the displayed settings and confirm with OK Stored will appear briefly on the screen Toena
69. choice If the code is new you may have Dise features to enter the code a second time as confirmation Access control Enter code Select the Parental level using A or W and confirm with gt A bar appears to select the parental level Auto resume On 89 O Select the appropriate rating using V A or the number buttons 0 9 What do the ratings mean Rating 0 displayed as parental control not active Rating suitable for children Rating 8 only suitable for adults What happens if a DVD scene contains a higher level than the ratin set If the recorder does not find a suitable alternative playback will stop and you must enter the four digit code 10 Confirm with OK Quit using lt and SYSTEM MENU Changing the country The set filter values depend on the respective country It is therefore necessary to enter the country to which these filter values apply Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU The menu bar appears Select the A icon using lt 4 or P Select line f Disc features using V or A and confirm with P Confirm the line Access control using gt Enter your four digit code If the code is new you may have to enter Dise features the code a second time as confirmation Access control Enter code Auto resume On
70. corder s memory Check that all TV channels saved on the TV set are available on the DVD recorder If required save any missing channels Please read Manual TV channel search in Installing your DVD recorder v Check the connectors at both ends of the scart cable Check your TV s operating instructions to see which scart socket is used for video signals v If the problem persists you won t be able to use this feature Stop recording with STOP W oN Problem 75 ENGLISH 76 Switching Direct Record on or off 000 0000 6 Switch on the TV set If required select the programme number for the DVD recorder Press SYSTEM MENU on the remote control The menu bar appears Select TA symbol with lt 4 or P gt Select Record settings using V or A and confirm with P Select Direct Record using VW or A Select On Direct Record on or Off Direct Record off using dor P Confirm with OK To end press SYSTEM MENU Switch off with STANDBY Manual recording Managing the disc contents Charly 1 00 29 59 e M1 Fri15 02 2003 When a recording is made to disc the following additional information is also stored at the beginning of the recording e Name of the recording If the TV station does not transmit a name only the channel number and time will be stored as the name e Length of the recording e Record type Quality e Date of the recording e Index pic
71. ct Current chapter using V or A OO 909 Using select hidden The picture is shown darker Switching quickly You can switch between show chapters visible and hide chapters hidden quickly and easily using SELECT This function is independent from the selected line To end press EDIT During playback this chapter will be skipped If the chapter is not visible select visible in step 3 with gt 79 ENGLISH Deleting chapter markers Within a title you can delete either all markers or individual markers 1 While the relevant chapter is playing press EDIT on the remote control The Favorite Scene Selection menu appears on the TV screen Favorite Scene Selection Insert marker Press OK Delete marker Delete all markers Current chapter How can select different chapters Press the T C button on the remote control Titles and chapters are displayed at the top of the screen Press ae Select title T or chapter C with gt or 4 Use A or to select the title chapter channel you want to edit 2 Use W to select either Delete marker for this chapter or Delete all markers for all chapters within the selected title 3 Confirm with OK You will be prompted to press OK again to make sure you really want to delete all markers If you do not want to press the lt button 0 To end press EDIT Changing the index picture Normally the picture from the b
72. ctures Rotate Rotates the selected pictures by 90 Copy Copies the selected pictures on the other loaded media from memory card to DVD RW R or vice versa Select all Selects all pictures Cancel Cancels the changes Using the buttons on the remote Play Button PLAY gt Erase Button CLEAR and then OK Rotate Button ANGLE Slide show You can display JPEG pictures in the selected roll automatically one after the other at adjustable intervals Starting the slide show Press PLAY P to start the slide show Interrupting the slide show O 27 Press PAUSE II This will stop the automatic display of the pictures Press PLAY to resume the slide show Closing the slide show The Digital Photo Manager Press STOP W The picture overview will appear ENGLISH 55 56 Changing the slide show settings 1 Press SYSTEM MENU during playback of the slide show 2 Select one of the displayed functions with the lt or P button Which options are available Overview Returns to the picture overview Has the same function as STOP E Play Resumes the slide show Has the same function as PLAY Timer Select one of various speeds by pressing V Confirm with P Start the slide show with PLAY Repeat Switches repeat playback of the slide show on and off Using the buttons on the remote Repeat playback Button PLAY MODE Enlarge pictures Button ZOOM
73. d inputs and connected additional devices For more information see section Sound setting in chapter User preferences vif a recording is too short it is possible that a DVD player cannot detect it Please observe the following Minimum recording times Recording mode M7 5 minutes M2 10 minutes M2x 13 minutes M3 15 minutes M4 20 minutes M6 30 minutes M8 30minutes vSome DVD players cannot play back DVD RW recordings You can solve this problem by using a special function Open the disc tray with OPEN CLOSE 4 Insert the disc but do not close the tray Hold down the number button 2 on the remote control until the tray closes The disc is modified If this fails to produce the desired result repeat the procedure using the number button 3 on the remote control You can restore the disc to its original condition by pressing 1 Warning There is a risk that you can no longer play the disc on other DVD players after this procedure Therefore apply this function with particular care PROBLEM SOLUTION vif it is impossible to play back a disc you can try and repair it for new recordings using the following function This will only prepare the disc for erasing It will not be erased however until the recording has been completed Other disc errors Clean the disc DVD RW Open the disc tray with OPEN CLOSE amp Insert the disc but do not close the tray Hold down CLEAR on the remote contro
74. dards x When copy DVD video discs or prerecorded video cassettes the picture is fuzzy and the brightness varies iS v This happens if you try to copy DVDs or video cassettes that have been copy protected Even though the picture on the TV is fine the recording on a DYD RW R is faulty This interference is unavoidable with copy protected DVDs or video cassettes Problem Connecting additional devices Connecting additional devices Connecting an external receiver satellite receiver set top box cable TV box You can connect external receivers to the EXT 2 AUX I O socket For additional receivers you can also use the EXT 1 TO TV I O socket if the TV set is connected to the COMPONENT VIDEO OUT sockets and VIDEO S VIDEO sockets at the front Please observe that you also have to connect an audio cable to the IN AUDIO L R or left AUDIO right socket ENGLISH 1 Connect the scart socket of the receiver satellite receiver provided for the TV set usually labelled TV TO TV with the EXT 2 AUX I O socket of the DVD recorder Why can t I use the VCR TO VCR socket In order to achieve the best possible picture quality you must use the RGB red green blue signal of the receiver As a rule this signal is available at the TV TO TV socket The DVD recorder transfers the signal to the EXT 1 TO TV I O socket Some receivers only provide a Video CVBS FBAS signal at the VCR TO VCR socket
75. e album until the album corresponds to your personal preferences Select Make video title in the menu Album Settings using V A Confirm with OK SAV NG will appear in the display and the screen will show the time left until completion The new album will be stored on the DVD RW R as a video title movie It will appear in the index picture screen as a separate title oo 90889 This video title will be recorded automatically after the last recording No existing titles will be overwritten Ensure that there is enough space on the disc O To end press DISC MENU Making a slide show from a roll Each roll will be stored as one video title on the DVD RW R If you want to make a video title from different rolls you have to create an album first Then you can store the album as a video title on the DVD RW R 1 In the Media menu screen select the memory card symbol in the middle and confirm with Select the line Rolls and confirm with gt Select with V A the roll from which you want to make a video title OO Press the Roll Settings menu will appear 60 The Digital Photo Manager O Select the line Make video title using V A an confirm with OK SHV i ND will appear in the display and the screen will show the time left until completion The new roll will be stored on the DVD RW R as a video title movie It will appear in the index picture screen as a separate
76. e DISC MANAGER button on the remote control Select Add current disc using A or V and confirm with gt Confirm with OK The disc number will be added to the Disc Manager The disc number is then displayed and the disc tray opens automatically The disc is now stored in the Disc Manager under the displayed disc number Please write this number on the disc and on the cover 800 Why do I need to label the discs When searching for unrecorded free space or available recordings you will asked to insert the appropriate discs disc numbers Toena press DISC MANAGER The DVD recorder will immediately recognise that this disc is saved in the Disc Manager When this disc is inserted the disc number will appear in the title overview in the top left hand corner Every DVD RW R is stored with a number in the Disc Manager DM You can remove this disc number from the Disc Manager to use the Disc Manager s memory for new discs or to remove damaged discs from memory 1 Press DISC MANAGER on the remote control 2 Select Remove a disc using A or W and confirm with P 8 Select the disc number with A or VW and confirm with OK Disc contents are not deleted The disc is only removed from the Disc Manager s memory Its contents remain unchanged Toena press DISC MANAGER 49 ENGLISH Searching for a title in the Disc Manager This function can be used to quickly and easily find and pl
77. e DVD recorder on programme number EXT2 If necessary use the MONITOR button to switch to the internal tuner Select programme number EXTT1 with 0 on the remote control and then select programme number EXT2 with CHANNEL You should select the TV channels to be received by the satellite receiver directly on the receiver itself 24 Installing your DVD recorder Installation Manual search Channel freq CH Entry search 01 Programme number 01 TV channel name BBC1 Decoder Off TV system PAL BG NICAM On Fine tuning 0 To store Press OK Installing your DVD recorder Allocating a decoder Some TV channels send coded TV signals that can only be viewed properly with a purchased or rented decoder You can connect such a decoder descrambler to your DVD recorder The following function automatically activates the connected decoder for the TV channel you want to watch How do allocate the decoder for Easy Link If your TV set supports Easy Link the decoder must be assigned to the relevant TV channel on the TV set see the operating instructions for your TV set Settings cannot then be made in this menu 1 Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Use the CHANNEL and CHANNEL buttons or the number buttons 0 9 on the remote control to select the TV channel for which you want to use the decoder If necess
78. e with poor reception To iT EasyLink With Easylink you can search for and store TV channels only on the TV set These settings are then transferred to the DVD recorder That is why you cannot select this function manually Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder Press the SYSTEM MENU button on the remote control The menu bar appears Select TA symbol with lt or gt Select Installation using W or A and confirm with P Select Sort TV channels using V or A and confirm with P Using V or A select the TV channel that you want to delete or whose order you want to change Installation Sort TV channels 000 8 a BeeT Confirm with gt P03 ITV P04 e Deleting TV channels a Unwanted channels or those with poor reception can be deleted using CLEAR Proceed at step QO To sort To exit press Press SYSTEM MENU Installing your DVD recorder 31 Using V or A shift the TV channel to the desired position and press the lt button The DVD recorder will insert the TV channel Repeat steps O to O until you have resorted deleted all the TV channels you want To store press OK OO 0 To end press SYSTEM MENU Setting the language country You can select the country and for the basic setting of DVD playback the language for the subtitles and the audio language Please note that with s
79. ecording type with 4 or gt Confirm using OK and SYSTEM MENU If you have selected the recording mode M3 M4 M6 or M8 you can select the Stndrd Standard or Sport setting for rapid movements in the Filter mode line Manual recording 73 Automatic recording from a satellite receiver Sat recording You can use this function if your own a satellite receiver that can control other devices via a scart cable and a programming function timer For more information please see the operating instructions for the satellite receiver QOO 8 O00 9090 12 Switch on the TV set If required select the programme number for the DVD recorder Press SYSTEM MENU on the remote control The menu bar appears Select A symbol with lt 4 or gt Select Record settings using W or A and confirm with P Select Sat record using V or A Select EXT2 with 4 or P Switching off Sat Recording To switch off the function select Off using or lt 4 Confirm with OK Use a scart cable to connect scart socket EXT 2 AUX I O on the DVD recorder to the corresponding scart socket on the satellite receiver To end press SYSTEM MENU Insert a disc you want to use for recording Programme the satellite receiver with the required information programme number of the TV channel start time finish time If necessary please see the operating instructions for your satellite receiver Switch o
80. ecting with video CVBS cable This cable usually with yellow Cinch connectors is used for transmitting the Composite Video signal FBAS CVBS In this method of transmission the colour signal and the brightness signal are transmitted on the same cable In certain circumstances this can lead to problems with the picture such as Moir patterns Have the following cables ready an aerial cable 1 supplied a mains cable 2 supplied a video CVBS cable 3 supplied yellow plug an audio cable 4 supplied red white plug 1 Remove the aerial cable plug from your TV set Insert it into the ANTENNA IN socket at the back of the DVD recorder 2 Insert one end of the supplied aerial cable into the TV OUT socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set 16 Connecting the DVD recorder VIDEO CVBS 33 2 Prine OUT P Z RAPE PAN a6 Then read the paragraph on Initial installation in Installing your DVD recorder Connecting the DVD recorder Insert one end of the supplied video CVBS cable into the yellow Cinch socket VIDEO CVBS OUTat the back of the DVD recorder and the other end into the video input socket usually yellow on the TV set usually labelled Video in or AV in See TV operating instructions Insert one end of the supplied audio Cinch cable into the red white Cinch socket AUDIO L R OUT at the back of
81. ed Locking unlocked discs To lock a disc that was formerly authorised follow the instructions below 1 Insert a disc Playback starts automatically If the playback does not start automatically press PLAY gt 2 Press the STOP Ml button while the icon is visible The icon changes to ES The disc is now locked Parental level control DVD video only Films on pre recorded DVD discs may contain scenes not suitable for children Therefore some discs may contain Parental Control rating information that applies to the entire disc or to certain scenes on the disc The appropriate scenes have filter values that reach from l 8 If such a scene is detected during playback the filter value set on the DVD recorder is compared to the scene If the filter value is higher than the setting an alternative scene will be played if available Most DVDs apply the rating to an entire DVD Therefore if certain scenes exceed the rating you select the entire disc will be blocked from viewing Activating deactivating parental level control 1 Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU The menu bar appears QOO Select the A icon using lt 4 or P 99 Select Disc features using W or A and confirm with P Confirm Access control using gt Enter a 4 digit code of your
82. ed during initial installation In this case you will need to search for and store the missing or coded TV channels manually Manual search with EasyLink With Easy Link the DVD recorder will automatically download the TV channels stored on the TV set This is why some lines have no function To store new TV channels they must first be stored on the TV set The information will then be transferred to the DVD recorder automatically 1 Switch on the TV set If required select the programme number for the DVD recorder 2 Switch on the DVD recorder using STANDBY ON Installing your DVD recorder 27 ENGLISH Press SYSTEM MENU on the remote control The menu bar appears Select T symbol with lt or gt Select Installation using W or A and confirm with P Select Manual search using V or A and confirm with P In Channel freq select the desired display using P Freq Frequency CH Channel S CH Special hyperband channel Installation Manual search 8000 O a ci In Entry search enter the frequency or channel of the TV station Programme number 01 using the number buttons 0 9 TV channel name BBCI Decoder Off oe PALRO xI don t know the channel for my TV station BS Fine tuning 0 v In this case press P to start the automatic search A changing channel Uz ae Ok number frequency number will appear on the TV screen y ress 8 Continue the automatic search
83. egin of a recording is used as the index picture You can however choose any picture from the recording as the index picture 1 During playback search for location of the new index picture Press the PAUSE Il button Press the EDIT button The Favorite Scene Selection menu appears on the TV screen Favorite Scene Selection Select line New index picture and confirm with OK New index picture Press OK New background OQO Start the change with OK Updating menu appears on the TV screen Divide title Press EDIT to exit Once the revision has been completed successfully the DVD recorder reverts to the index overview 80 Managing the disc contents Changing the menu background You can choose any frame from the recording as the menu background This setting is stored on the inserted DVD Please note that after the modification the original background will be lost If you erase the complete disc close the disc tray with CLEARand make a recording the original background will be restored 1 During playback search for the location that is to be used as the new menu background Press the PAUSE II button ENGLISH Press the EDIT button The Favorite Scene Selection menu appears on the TV screen Favorite Scene Selection Select line New background and confirm with OK New index picture Press OK New background oo Start the change with OK Updating menu appears on the T
84. er and then use Mor Wto select the appropriate title Make sure the symbol T title is selected in the menu bar Use TiC to select chapters within a title Press T C and use P to select the C symbol chapter Now select the appropriate chapter with A or V Searching a disc You can search the disc for a recording at 4x 8x or 32x playback speed Other speeds can only be selected via the menu bar p gt 1 During playback press and hold I 4 reverse or PPI forwards to switch to the search feature You can switch between the playback speeds using dq PPI 2 To continue playback press PLAY at your chosen location x No sound V v The sound is switched off in search mode This is not a fault in your machine Problem Search feature via menu bar During playback press SYSTEM MENU on the remote control The menu bar will appear at the top of the screen Select the gt symbol using P or lt and confirm with V You can now use the lt 4 or P button to select different forward and backward search speeds If necessary switch the menu bar off with the SYSTEM MENU button To continue playback press PLAY Additonal playback features 43 1 During playback press PAUSE II to stop playback and display a still Cra LLI picture Frame advance via menu bar During a still picture press SYSTEM MENU on the remote control The menu bar will appear at the top of the screen Select the
85. es the entire frequency range in order to find and save the largest possible number of TV channels v If you have not connected an aerial go through all the basic settings right to the end and then if you wish start the automatic search see Automatic TV station search When the automatic TV channel search is complete Autom search complete will appear on the TV screen Time Year Month Date will then appear on the TV screen Check if the time in Time is correct If required change the time with the number buttons 0 9 on your remote control Select the next line with A or V Check if the displayed settings for Year Month and Date are correct When all information is correct save by pressing OK 23 The initial installation is now complete Satellite receiver If you are connecting a satellite receiver please read the section on Using a satellite receiver Decoder If you are connecting a decoder you must install it as described in the next section x Sound may be distorted on some TV channels v If the sound is distorted on any of the stored TV channels or if there is no sound at all the wrong TV system may have been stored for the TV channel Read Manual TV channel search for information on how to change the TV system Problem Using a satellite receiver TV channels from a satellite receiver connected to scart socket EXT 2 AUX I O are received on th
86. ff the DVD recorder using STANDBY SAT also appears in the display to indicate that the function is active The DVD recorder is now ready to record The start and end of the recording is controlled via scart cable EXT 2 AUX I O 74 Manual recording Manual recording Direct Record Can you record the right TV channel in seconds when the DVD recorder is switched off No problem If recording is started manually the switched off DVD recorder takes the current TV channel from the TV set via the scart cable You will find more information on how to switch Direct record on or off in the next section Direct record O 27 How does Direct Record work The DVD recorder compares the TV channel selected on the TV set with its stored TV channels via the scart cable If the same TV channel is found it switches the DVD recorder to the corresponding programme number and starts recording Please do not change channel on the TV during the search This could affect the tuning of the DVD recorder On the TV set select the programme number you want make the recording from Press REC OTR with the DVD recorder switched off x The display will read WH T v The DVD recorder is comparing its saved TV channels with those of the TV set Please do not change the TV channel on the TV set while WH T is shown in the display UNIT ive x Nui v appears in the display v This TV channel could not be found in the DVD re
87. g timer will only function if the DVD recorder is switched off STANDBY button vEither a disc has not been inserted or the disc cannot be used for recording Insert a disc on which recordings can be made Search the position on the disc where you want the recording to begin Switch off the DVD recorder using STANDBY vA write protected disc has been inserted Undo the write protection see Preventing accidental erasing of discs in Manual recording or insert a different disc vif this error message appears after pressing TIMER then all TIMER blocks are already programmed No more recordings can be programmed Press the P button If you want to clear or check a programmed recording TIMER block select it with A or V vThe data for the recording could not be transferred Please check date start time and finish time of the programmed recording v Two programmed recordings overlap vif you ignore this error message the show with the earlier start time will be recorded first The start of the second show will not be recorded v Change the setting for either of the two recordings v Clear either of the two recordings 91 ENGLISH User preferences TV shape Black level shift Video shift RGB attenuation Video output 92 Picture RGB CVBS In this section you will learn how to set your user preferences on the DVD recorder The symbols have the following meanings 2 id
88. grammed a recording using ShowView System There is picture or sound interference on TV reception Distorted sound coming from a connected hi fi amplifier The picture is distorted or black and white during playback No sound signal at the digital output A DVD RW disc cannot be played on certain DVD players 104 SOLUTION Enter the ShowView programming number of the TV channel you want Confirm with OK Check the programme number channel name in the Prog input field If this does not correspond to the desired TV channel select the input field and change the programme number channel name Confirm with OK Before recording select the recording mode as described in chapter Manual Recording section Selecting the recording mode quality v Have your aerial checked vYou will find information on how to change the TV system in Manual TV channel search in Installing your DVD recorder v The DVD recorder is connected to the Phono input of your amplifier This socket is provided only for record players without a preamplifier Select a different audio input vThe TV system of the disc does not match that of your TV set PAL NTSC vThe recording can be made in colour only when the TV channels or the connected additional device send a colour signal Black and white signals containing no color information colour subcarriers cannot be recorded Check whether the sound settings match the selecte
89. he same time all DVD players have a specific regional code Discs can be given NS a regional code If the regional codes differ between the player and the UA disc playback is not possible 7 v The regional code is shown on the label on the back of the machine v The regional code does not apply to recordable DVDs Problem Inserting a disc 1 Press the OPEN CLOSE button on the front The disc tray will OFEN H NG Hr open While the disc tray is opening UFENING and then TRAY OPEN TUTE EEE EEE when the tray is fully open 2 Carefully place the disc in the tray with the label facing up and press PLAY gt or OPEN CLOSE 4 CL05 N amp and then REATING will appear in the display The information on the disc will be read How do insert a double sided DVD Double sided discs do not have labelling over the whole surface The labelling for each side is in the centre of the disc To play a side its label must be facing up 38 Playback 3 VIDEO DVD ReWritable alist DIGITAL AUDIO dise DIGITAL VOEQI Playback Opening closing the tray using the remote control You can open and close the disc tray using the remote control Press and hold the STOP Ml button on the remote control until the dialog box shows OPENING or CLOSING 8 Playback starts automatically ENGLISH A menu may appear when a DVD is played back If the titles and chapters are numbered press a number button on
90. he number buttons 0 9 01 BBC1 20 15 21 30 M2 Switching on VPS PDC in the Start input field Select the Start input field using Using SELECT switch on VPS PDC lights up If you press SELECT again you will switch VPS PDC off goes out Mo Fr Weekly To store Changing the recording mode in input field End Press SELECT Press OK Select the End input field using gt Use REC MODE to select the recording mode M1 M2 M2x M3 M4 M6 M8 Fit to space Recording You can select also the recording mode FR With these setting the recording mode bit rate will be automatically calculated to use the complete empty space title Empty If the empty space is too small the recording will be stopped to prevent the following titles from being overwritten Do not use this function under the following conditions more then one programmed recording daily weekly repeated recordings recordings with VPS PDC May be the calculation of the recording mode can not function properly If all information is correct press the OK button The programming information is stored in a TIMER block To end press TIMER Insert a recordable disc one without write protection The inserted disk is checked Search the position on the disc where the recording should begin Press STOP E Switch the DVD recorder off with STANDBY The programmed recording will only function properly if
91. i eii iisssretessssiriisi ss 78 WSOPE chapter Markers o s iisesssiooririeisisiissriiosvssssusssiissivivissssosisssissi Siini 78 Hiding chapters escon ien n EERE 78 Deleting chapter markers sssssssssssecsssssssssessesseessessessseasesseeneenssessesees 80 Changing the dex Pict re sssini esini 80 Changing the menu background sssssssssseeesssseesercerssssssssssreerereeessssssssssreeee 8l lia UES oranin er ar E AAEE 8l Editing recording titles name ss sssssssseessesesssseesesereesssssssrreeereeeesessssssrreeee 82 PRY FS the entire Ute sncssienusiiiasiiinissiisiiiisii aai Erasing recordings titles Ee Seas cae etait tinea Sia E nina 83 Changing the disc name Finishing editing Finalising DVD R discs a Erase DVDERW disks oie sicscecossinsssensessssevsscssennnvosasson a programming a recording TIMER ssssscsssisssstvsstesascasssaiiassocrssescce B E i A E A E 86 Programming recordings with the ShowView System sssese 87 Programming recordings without the ShowView System ss s 89 How to change or delete a programmed recording TIMER 90 NexTView LATE sescsissscnssscsssecnnvsontscvassessnsscetice 90 Problem solving for programmed recordings s ssssesssessesssseseesseeseess 91 Huser preferences eseessesssssessseosseee IZ EAE e 12 E E A E E 92 Sound settings i kangue SS CIS sicn n e a AA 95 Additional setings ecniennerananii iii i 95 Rem
92. id not insert the corresponding medium disc or memory card a warning sign will appear above the symbol on the left hand side of the screen Confirm with gt Select Rol using V or A and confirm with P Q OOQ You will see an overview with the first picture of each roll that contains pictures The display and the description of the roll will depend on the camera or the computer program used to create this roll Select the desired roll using V or A and confirm with OK The data will be read and then an overview of the stored pictures will be displayed You can select a picture for viewing or editing with lt gt V A Fast browsing trough the pictures With PPI or M lt you can switch one page forward or backward You can also select a picture with the number buttons 0 9 on the remote 10 Press OK to select the desired picture The picture will be displayed as a full picture on the screen The Digital Photo Manager Editing JPEG pictures On the corresponding pictures press SELECT to select them for editing The picture frame appears in a different color If you want to deselect the pictures press SELECT on the selected pictures again Keep pressing A until the menu bar is selected Select one of the displayed functions with the gt or lt button Which options are available Menu leave the menu Play Starts the slide show Erase Erases the selected pi
93. il the displays disappear This feature plays back the first 10 seconds of each chapter DVD or track CD 1 During playback press PLAY MODE Select using PLAY MODE 2 After 10 seconds the DVD recorder switches to the next chapter index To start playback at the relevant chapter index press STOP W and then PLAY Camera angle If a DVD contains scenes that have been shot from different camera angles you can select these camera angles for playback 1 During playback press PAUSE II You will see a still picture 2 Press SYSTEM MENU and select the P icon using P x The P94 symbol will be hidden a es v The selected scene has been shot from only one camera angle This feature is therefore not available For more information please read the cover of your DVD disc Problem if 8 Select the required camera angle with Wor A You can also directly enter the number with the number buttons 0 9 4 After a short time playback will resume from the new camera angle The symbol will remain visible until a scene starts for which there is only one camera angle Additonal playback features Additonal playback features Zoom feature The Zoom feature allows you to enlarge the video image and pan through the enlarged image 1 During playback press ZOOM The DVD recorder switches to PAUSE You will see a still picture Select the required zoom factor using W or A When pres
94. input socket EXT 2 AUX I O These setting concerns only the input signal The RGB output signal on the socket EXT 1 TO TV I O leaves unchanged ENGLISH Video output Since RGB and S Video signals sometimes use the same connections on a scart cable the two signals cannot be transmitted simultaneously With these settings you can decide whether RGB or S Video signals should be transmitted This setting affects only the scart sockets of the DVD recorder EXT 1 TO TV I O output socket and EXT 2 AUX I O input socket Please also observe which signals are available at which scart socket of the TV set or how the scart sockets need to be switched If necessary consult the instruction manual of your TV set RGB CVBS Depending on the TV set you are using switching between the RGB and the Video CVBS FBAS signal is done automatically If the picture scrolls to the side or the colour quality is poor on some TV sets when the setting is RGB CVBS you must select CVBS only S video only Both scart sockets EXT 1 TO TV I O output socket and EXT 2 AUX I O input socket process only the S Video signal In case the scart socket of the TV set is not suitable for S Video Y C signals you will only see a black and white picture although the recording will be made in colour Moreover only the video CVBS FBAS signal will be used for recordings via the EXT 1 TO TV I O scart socket Please observe that when making recordings from
95. ional device satellite receiver e Switch on the additional device during the installation of the DVD recorder During the automatic channel search the channel on which the additional device is transmitting will be stored as a TV channel 19 20 Connect camcorder to the front sockets To copy camcorder recordings you can use the front sockets These sockets are located behind the flap on the right hand side Best picture quality If you have a DV or Digital 8 camcorder connect the DV IN input of the DVD recorder to the appropriate DV output on the camcorder When films are transferred the original recording date and time are stored as DVD subtitles On playback this data can be displayed on the TV screen by using the C function Subtitle Choose L Ae as a programme number for this input Very good picture quality If you have a Hi8 or S VHS C camcorder connect the S VIDEO input of the DVD recorder to the appropriate S VHS output on the camcorder You must also connect the audio input left AUDIO right on the DVD recorder to the audio output on the camcorder Choose LA f as a programme number for this input Good picture quality If you have a camcorder that only has a single video output Composite Video CVBS connect the VIDEO input on the DVD recorder to the appropriate output on the camcorder You must also connect the audio input left AUDIO right on the DVD recorder
96. irm otherwise cancel the function using A 3 The overview of all albums will then be displayed Changing the media settings You can adjust various settings for a DVD RW R or a memory card If a CD R RW is loaded no changes can be made because this media cannot be recorded by the DVD recorder 1 Press PHOTO on the remote control The Media menu screen will appear 2 Use Wor A to select the medium you want to process disc or memory card If you did not insert the corresponding medium disc or memory card a warning sign will appear above the symbol on the left hand side of the screen 3 Press gt 4 Select the line Media settings and confirm with OK Media name The name of the media will be created by the digital camera Protection The write protection of the media can be switched on or off You can use this function only if the write protection can be switched off by a software You can not select this line if your memory card was equipped with a mechanically switch Prepare media The DVD RW R will be prepared for the data transfer Read further information in the section Preparing a DVD RW R Finalise disc You can select this line only if a not finalised DVD R is loaded If you store pictures on a DVD R you have to finalise the disc to play it on a DVD player Once this process is complete no further changes can be made Erase media With these setting all data
97. l until the tray closes The disc is prepared for erasing Start recording as with an empty disc ENGLISH vThis message may appear if you instert a disc that was not finalised DVD R s that have not been finalised are very sensitive to fingerprints dust or dirt This may cause problems during recording To use the disc again follow the next steps Make sure that the surface of the disc is clean Open the disc tray with OPEN CLOSE 4 Insert the defect DVD R but do not close Other disc errors the tray DVD R Disc Hold down 5on the remote control until the tray closes The disc will be read REATING contains unknown appears on the display and the DVD recorder will start the repair process This may take up to four times as much time as the recording in which the error occurred data ry If the disc is recovered the index screen will appear Please observe the following Error during recording The title may be missing Error while changing the title index picture The original title index picture may be visible Error while finalising The disc appears not to have been finalised vYou can finalise the disc using the following function Open the disc tray with OPEN CLOSE 4 Insert the defect DVD R but do not close The index screen the tray flickers when a DVD R Hold down 4 on the remote control until the tray closes is inserted FINAL ZE appears in the display Finalising begins This may take up to
98. le that the connection to this pin is interrupted or that the signal is distorted by an additional device connected to the EXT 2 AUX I O socket Remove any scart switch boxes mixing consoles signal amplifiers connected between the DVD recorder and the TV set Connect the DVD recorder directly to the TV set vRemove any additional devices from the EXT 2 AUX I O socket vTry using another scart cable all pins wired v Please observe the installation order 1 Switch on the TV set 2 Connect the DVD recorder to the mains 3 Switch on the DVD recorder using STANDBY 4 The data transfer should now work ENGLISH v There is no recording on the disc Change disc vYou inserted the wrong disc type Your recorder can play back the following disc types DVD Video Super Video CD DVD R W Audio CD MP3 CD s vYou inserted the disc the wrong way Insert the disc with the label facing upwards Disc is dirty Clean the disc vYWrong region code The region code of the DVD and the DVD recorder must match Parental control is on Read chapter Access control child lock vYou have selected the wrong programme number for the DVD recorder on the TV on the TV select the correct programme number for the DVD recorder vThe cable connecting the TV set and the DVD recorder has come loose check the cable vit is possible that this Super Video CD contains a menu and the PBC is switched off You can see this in status field PBC O
99. ls will be created automatically from the digital cameras Albums A binary file containing references to the pictures on the rolls It is comparable with a conventional photo album that may contain the pictures of different films rolls You can delete an album without deleting the pictures of the rolls The Digital Photo Manager The Digital Photo Manager The PC PCMCIA Card In this DVD Recorder you can use the following types of memory cards with an adapter SD memory cards e Multimedia Card e CompactFlash SmartMedia e Memory Stick Memory Stick pro e Micro Drive e xD Picture Card The DVD Recorder can read write files which were stored on memory cards using the file systems FAT 8 FAT 12 FATI6 and FAT 32 This means that it can handle memory cards larger than 2 GB Inserting the PC Card 1 If necessary insert the memory card into the PC Card adapter first The label must be facing up The contacts must be facing the device 2 Insert the PC Card into the media slot in the front of the recorder until the EJECT button sticks out of the device front completely Press this button only if you want to remove the PC Card Removing the PC Card 1 Press the EJECT button next to the PC Card 2 This will push the card out of its slot If the card remains in the slot insert the PC Card once again and press the EJECT button again Warning Insert Remove the PC Card only when there
100. lso displays information on the current operating status counter playback recording TV channel etc on the TV screen You can switch off the information about the operating status so that the on screen display OSD is not recorded during copying On The OSD information appears in every selected mode for a few seconds and disappears again Off The OSD information is switched off It is no longer displayed on the screen Live source view With this function you can switch between the live picture or the information of the selected TV channel input socket in the Tuner information box left hand corner of the screen On The live picture of the selected TV channel or signal on the input sockets is visible Off The information about the selected TV channel or signal on the input sockets is visible 95 ENGLISH 96 Auto standby If you haven t used the DVD recorder for a few minutes in certain modes e g STOP it will switch to standby automatically You can cancel this function to use the DVD recorder as a television receiver On The DVD Recorder leave switched on Off The DVD Recorder will be switched to standby Standby To save power you can switch off the clock display on the DVD recorder Programmed TIMER recordings will still take place In addition you can present the most important features of the DVD recorder in scrolling text in the display demo Low power If the
101. m with OK WARNING All data on the disc will be erased If you want to continue press OK To cancel the process press W or A To The Digital Photo Manager 6l ENGLISH 62 O PREPRRIND will appear in the display until the preparation is complete O If the disc has been successfully prepared the Media settings menu will appear indicating the available storage space 4 4 GB for Photo only 650MB for Video amp photo Transfer the photos to a DVD RW R Using this function you can store the pictures on the DVD RW R in the same format as on a memory card You can handle these pictures as if they were stored on a memory card If you want to play this DVD on a computer drive ensure that the operating system of your computer can handle the file system UDF 1 5 Universal Disc Format If you want to play back a DVD RW R on a DVD player read section Making a DVD compatible slide show 1 Press PHOTO on the remote control The Media menu will appear Use V or A to select the disc with the memory card last symbol If you did not insert a disc a warning sign will appear above the symbol on the left hand side of the screen Press P gt oo 8 Use V or A to select whether you want to copy the complete memory card into a roll or to create additionally to the roll an album that contains the same pictures as the roll The creation of the album makes edits easier Attention Ensure that
102. me per disc To check the quality of a recording mode you can make a test recording with the desired recording mode Check during playback the quality of this test recording During playback the correct picture quality will automatically be selected ENGLISH 1 Switch on the TV set If required select the programme number for the DVD recorder Select the record mode with the button REC MODE on the remote control Which recording types can I choose Please observe that you can not switch the recording type during recording You have to interrupt the recording with the STOP Mf button MT High Quality offers the best picture quality and a recording time of hour M2 Standard Play pre recorded DVD quality offers standard picture quality and a recording time of 2 hours M2x Standard Play plus better than S VHS quality offers standard picture quality and a recording time of 2 5 hours M3 Long Play S VHS picture quality Recording time of 3 hours M4 Extended Play better than VHS picture quality Recording time of 4 hours M6 Super Long Play VHS picture quality Recording time of 6 hours M8 Super Extended Play VHS picture quality Recording time of 8 hours Can I select the recording type via a menu as well Press the SYSTEM MENU button Select T 4 symbol with lt 4 or gt Select Record settings using V or A and confirm with In the line Record mode select the r
103. minutes to the recording time How can I cancel the recording time I have just entered To delete an entry press CLEARwhile the display shows the recording time How can I check the remaining recording time Press SYSTEM MENU while an OTR is in progress The time at which the recording will end will appear on the TV screen in the timer info box To ensure you don t accidentally delete a recording you can protect the entire disc You can only ever protect the entire disc You cannot protect individual recordings What happens with DVD R discs As long as these discs are not finalised they can be protected against accidental erasure in the same way as DVD RW discs Insert the disc to be protected While the index screen is displayed press STOP Ml on the remote control The first title is highlighted Press A This takes you to the disc info screen Press the P button Select the Protection line Confirm with gt 00 086 Select Protected with the W button and confirm with OK Manual recording 71 72 O Press lt and then DISC MENU to terminate The entire disc is now protected If an attempt is made to record on a protected disc I n C LGC will appear on the display and Disc locked will appear on the 15 the screen If you later decide to record on the disc follow these steps but select Unprotected at step O Lining up recordings within a title assemble cut
104. n automatically transfers all the television channel settings onto your DVD recorder via the scart cable EXT 1 TO TV I O socket Recordings made on your DVD recorder can be controlled from an external satellite receiver At the touch of a button your DVD recorder even though it is switched off will check which channel is currently playing on your television and record it This connector is also known as a FireWire or IEEE 394 This connector is used to transmit wide digital broadband signals that are used for digital video camcorders Audio and video signals are transmitted using a cable In addition to DV and Hi8 camcorders PCs with digital video output can also be connected to the digital input This screen tells you what s on the disc Each index screen represents a recording On the right hand side of the screen you can also see a disc indicator that shows the position and length of the current recording on the disc in a graphic format This function enables you to simply delete commercials or other scenes The relevant scenes are marked and skipped as required This information is stored on the DVD in such a way that other DVD players will skip the scenes MP3 files are highly compressed music files The data is compressed to 1 10 of the volume of the original audio material using a special process This means that 10 hours of music can be stored on a single CD These music CDs can be played on this machine Normally a reco
105. nce This disc is only authorised for single playback If the recorder is switched off the PIN code must be re entered Activating deactivating child lock Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU The menu bar appears Select the T icon using lt 4 or P Select Disc features using V or A and confirm with P Confirm Access control using Enter a 4 digit code of your choice If the code is new you may have to enter the code a second time as confirmation Disc features Access control Enter code Auto resume On Select Child lock using A or VW and confirm with P Select the icon using V or A Confirm with OK 68e00 00 02000 Quit the feature using lt and SYSTEM MENU Unauthorised discs can only be played by entering the four digit PIN code To deactivate the child lock select the f icon in 98 Access control Child Lock Access control Child Lock Authorising a disc 1 Insert a disc The access control box will appear after a short delay 2 Using A or V select Play once or Play always 3 Enter your PIN code using the number buttons 0 9 ENGLISH Double sided DVDs may have a different ID for each side For these discs each side must be authorised Video CDs may have a different ID for each disc For these CDs each disc must be authoris
106. nce If it is not finalised after a recording further recordings can be added to it Old recordings can be deleted but can no longer be overwritten The deleted titles are marked Deleted title Before this disc can be played in a DVD player it must be finalised in the DVD recorder Once this process is complete no further recordings can be added What can my DVD recorder do Your Philips DVD recorder is a machine for recording and playing back digital video discs with two way compatibility with the universal DVD video standard This means existing DVD video discs can be played on the recorder Recordings made on your DVD recorder can be played on other DVD video players and DVD ROM drives 4 Introduction DVD ReWritable DVD R DVD DVD VIDEO lt i 2 oa L lt a Introduction alist DIGITAL AUDIO AX SUPER AUDIO CD aise DIGITAL V DEQ WISE SUPER VIDEO aise l Recordable liste Writable D Discs you can use The following discs can be used in your DVD recorder for playback and recording Playback and recording ENGLISH DVD RW Digital Versatile Disc rewritable DVD R Digital Versatile Disc Recordable Playback only DVD Video Digital Versatile Disc DVD R DVD Recordable These discs can only be played back if the recording was made in video mode and the recording was finalised DVD RW DVD Rewritable These discs can only
107. nd the other end into the aerial input socket at the back of the TV set 3 Insert one end of an S Video SVHS cable into the S VIDEO Y C OUT socket at the back of the DVD recorder and the other end into the S Video SVHS input socket on the TV set usually labelled S Video in or SVHS in See TV operating instructions Connecting the DVD recorder I5 O Insert one end of the supplied audio Cinch cable into the red white Cinch socket AUDIO L R OUT at the back of the DVD recorder and the other end into the audio input socket usually red white on the TV set usually labelled Audio in or AV in See TV operating instructions O Switch on the TV set Switch the TV set over to the SVHS input socket or select the relevant programme number Please see your TV s operating instructions for the programme number you need O Insert one end of the supplied mains cable into the mains socket MN MAINS at the back of the DVD recorder and the other end into the wall socket The most important features of the DVD recorder will appear in scrolling text on the display After the first installation is completed this function will be switched off How you switch on this function again read in the chapter User preferences in the section standby Q Switch on the DVD recorder using STANDBY ON 5 Ty ONP will appear on the display Then read the paragraph on Initial installation in Installing your DVD recorder Conn
108. ne e g 5 312 4 or 5 312 4 Enter 53124 for the ShowView number If you make a mistake you can clear your instructions with CLEAR Selecting daily weekly recordings Using SELECT select from the following options Mo Fr Repeated daily recordings Monday to Friday Weekly Repeated weekly recordings every week on the same day Confirm with OK 87 xThe following message appears _ on the screen Please enter programme number v The programme number of the TV channel has not yet been assigned to the ShowView number Use gt lt 4 or the number buttons 0 9 on the remote control to select the appropriate programme number name of the TV channel and confirm with OK x The following message appears on the screen ShowView number wrong v The entered ShowView number is incorrect Correct your entry or cancel using the SYSTEM MENU button y Check the time date see Setting the time amp date in Installing your DVD recorder programming not possible v A daily recording was entered for the wrong day Daily programming can xThe following message appears on the _ screen Weekend ces only be used for recordings to be made from Monday to Friday Problem Timer O The decoded data appears after confirmation You can go back and ShowView system change the data Select the appropriate input field with gt or lt 4 If Date Prog Start Hae End Hee required make changes using A V or t
109. ng the photos in the Digital Photo Manager Select Select function value photos Digital Photo Manager Open the Digital Photo Manager Disc menu To show the DVD menu or the index screen to leave the Digital Photo Mamger SYSTEM MENU qaPav CHANNEL CHANNEL OK PLAY gt STOP E PAUSE Il 0 9 CLEAR System menu Call up cancel the main menu menu bar at the top of the screen Cursor keys Cursor left right up down Plus Next programme number Minus Previous programme number Store confirm To store or confirm entry Playback To play a recorded disc Select previous title search backwards Briefly press the button during playback Previous chapter film or previous title Hold down the button Search backwards Hold down button during still picture slow motion backwards Stop Stop playback recording except with programmed recordings TIMER Hold down button opens and closes the disc tray Pause still picture If this button is pressed during playback the DVD recorder switches to pause You will see a still picture If this button is pressed during recording the DVD recorder will also switch to pause Select next title search forwards Briefly press the button during playback Next chapter film or next title Hold down the button Search forwards Hold down button during still picture slow motion forwards Number Letter buttons To enter numbers or letters in appropriate entry fields
110. nk at the back of the TV set see TV set operating instructions O Read the next chapter Connecting additional devices on how to connect additional devices satellite receivers videorecorders to the input output sockets Connecting the DVD recorder EasyLink loading data from TV please wait By Virgin mode Audio Language English Espafiol Frangais Portugu s Italiano Press OK to continue Connecting the DVD recorder Switch on the TV set Use the supplied mains cable to connect the mains socket cv MAINS at the back of the DVD recorder with the wall outlet The most important features of the DVD recorder will appear in scrolling text on the display After the first installation is completed this function will be switched off How you switch on this function again read in the chapter User preferences in the section standby Switch on the DVD recorder using STANDBY ON A message appears on the screen announcing that the transfer has started FASUL I NK appears on the display during transfer The TV set transfers all saved TV channels in the same order to the DVD recorder This may take several minutes x Time Year Month Date appears on the TV screen Check if the time in Time is correct Q 2 If required change the time with the number buttons 0 9 on your remote control Select the next line with A or V O Check if the displayed settings for Year Month
111. nto the scart socket EXT 1 TO TV I O at the back of the DVD recorder and the scart socket for the DVD recorder at the back of the TV set see TV set operating instructions EXT1 TO TV 1 0 2 al My TV set has several scart sockets Which one should I use Select the scart socket that is suitable for both video output and for video input My TV set shows me a selection menu for the scart socket Select VCR as the source for this scart socket 4 Read the next chapter Connecting additional devices on how to connect additional devices satellite receivers videorecorders to the input output sockets Switch on the TV set Insert one end of the supplied mains cable into the mains socket MN MAINS at the back of the DVD recorder and the other end into the wall socket e The most important features of the DVD recorder will appear in geg 7 scrolling text on the display After the first installation is completed MAINS cO this function will be switched off How you switch on this function ae again read in the chapter User preferences in the section standby Q Switch on the DVD recorder using STANDBY ON 5 Ty ON will appear on the display 14 Connecting the DVD recorder O If the connection was properly made and your TV was automatically switched to the programme number for the scart socket e g EXT 0 AV you will see the following picture 2y Virgin mode x My screen is empty
112. o continue 8 Installation Autom search Searching for TV channels 00 Channels found Please wait Autom search Autom search complete 00 Channels found Time 20 01 Year 2003 Month 01 Date 01 To continue Press OK 8 808 88 Installing your DVD recorder Select the desired screen format position using V or A These settings will only be used if you insert a DVD that contains this information Which screen formats can select 4 3 letterbox for a wide screen cinema format picture with black bars at the top and bottom 4 3 panscan for a full height picture with the sides trimmed ENGLISH 16 9 for a wide screen TV set screen edge ratio 16 9 Confirm with OK Select the country of your residence with W or A If your country does not appear select Other Why do I have to select a country To call up the specific settings for the respective country you must first install the country Confirm with OK After you connect the aerial or cable TV satellite receiver etc to the DVD recorder press OK The automatic TV channel search starts WH T will appear on the display x The DVD recorder cannot find any TV stations y Select channel on the TV set Can you see the stored TV channel on the TV set If not check the cable connection from the aerial aerial socket to the DVD recorder and to the TV set y Please have patience The DVD recorder search
113. o disc or video CD is interrupted button STOP W or OPEN CLOSE when the disc is reloaded disc is started playback starts at the precise location where it stopped This applies not only to the current disc but to the last 20 discs played This feature can be switched off if not required PBC This line appears only if a VCD is loaded This function lets you activate or deactivate the PBC menu Playback Control for video CDs See Playing a Super Video CD Finalise disc This feature allows you to finalise DVD R discs If the disc has already been finalised this line will appear darker Adapt disc formaf If a DVD RW has been recorded in a computer drive or in another DVD recorder the index screen may not be displayed correctly This feature allows you to change the format of the disc It is therefore only visible if the disc format is different 97 ENGLISH 4 control Child Lock This feature enables discs to be locked for children When Child Lock is on a 4 digit code PIN needs to be entered before a disc can be played You can also decide whether the inserted disc should always be played or should be played only once despite the child lock Play always This disc is stored in a memory with space for 50 child safe discs If more than 50 discs are stored the last disc in the list is removed and the new disc is added The screen shows Child safe at the start of playback Play o
114. o find out which audio formats it supports x All I can hear from my loudspeakers is a loud distorted noise v The receiver is not compatible with the digital audio format of the DVD recorder The audio format of the DVD disc is displayed in the status window when you switch to another language Playback in six channel digital surround sound is only possible if the receiver has a digital multi channel sound decoder Connecting additional devices 21 Installing your DVD recorder Initial installation After successfully connecting your DVD recorder to the TV set and other additional devices as described in the previous chapters this chapter will show you how to start the initial installation The DVD recorder automatically seeks out and stores all available TV channels By Virgin mode Menu Language English Espafiol Frangais Italiano Deutsch Press OK to continue By Virgin mode Audio Language English Espafiol Frangais Portugu s Italiano Press OK to continue By Virgin mode Subtitle Language English Espafiol Frangais Portugu s Italiano Press OK to continue 22 Connecting additional devices If you have connected additional devices such as a satellite receiver to the aerial cable switch them on The automatic channel search will recognise it and save it Please observe that you must switch on a test signal for some additional devices No aerial connected Even if you only want to use the
115. of a title this setting lets you watch the entire title including the hidden sections To do this proceed as follows OQO 886 Press the STOP W button or during playback press DISC MENU Using A or W select the title you want to play all of and confirm with gt The title editing menu will appear Select Play full title using A or W and confirm with OK Playback starts automatically The title is played in its entirety including the hidden chapters Managing the disc contents Erasing recordings titles You can erase specific recordings from a disc To do this proceed as follows Press the STOP W button or during playback press DISC MENU Using A or select the title you want to delete and confirm with Settings for title Charly 1 gt The title editing menu will appear Name Charly 1 Play full title a Erase this title Press OK ENGLISH Select Erase this title using A or W and confirm with OK This will completely erase this title appears on the TV screen Press OK to confirm If you want to delete this title press OK to confirm Otherwise press lt Erasing title appears on the TV screen QO gt OOO At this point Empty title appears in the index picture display A new recording can now be made here If the deleted title was very short less than minute Empty title will not appear at this point Can titles be deleted from a DVD R disc Titles on D
116. of the DVD recorder You can store up to a maximum of 100 pictures per album in 20 albums Adding pictures to an album Select Albums in the Media menu using W or A and confirm with gt An overview of the albums you already created will appear Select New album with W to create a new album Press The menu Album Settings will appear In a new album the line Add photos is already highlighted Confirm with OK The roll overview will appear Use V or A to select the roll from which you want to add pictures to the album Confirm with gt The picture overview will appear Use 4 gt V A to select the pictures you want to add to the album 000 08 O 8 Confirm each selected picture with SELECT Do not pay attention to the order of the pictures You can change it later in the album Select all pictures If you want to store many pictures in the album select Select all Then use SELECT to select the pictures you don t want to add to the album These pictures will be deselected Keep pressing A until the menu bar is highlighted Select Done with lt or P to add all selected pictures to the album Confirm with OK The album will be created SHV i the album is created Do not remove the medium from the device 860 5 will appear in the display while The menu Album Settings will then automatically appear 00 To add additional pictures use W to select Add photos
117. ome DVDs the audio language and or subtitle language can be changed only via the DVD menu For bilingual shows you can also select the sound channel of the TV station via the internal tuner MONITOR button for recording or playback You also have the option of setting one of the displayed languages for the on screen menu OSD However the DVD recorder display will only display English text regardless of this setting To oer 1 Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU on the remote control The menu bar appears Select TA symbol with lt or gt Select line Language with Wor A and confirm with the gt button 00 OO Select the appropriate line and confirm with P Language Which settings can choose Audio Language English Audio Language The DVD will play back in the language you have chosen Recording audio Language 1 Recording audio In the case of bilingual programmes you can choose either Subtitle English Language 1 or Language 2 as the default setting Menu English Subtitle Subtitle language County Menu Language of the OSD menu Country Location Select the appropriate setting using V or A and confirm with OK To end press SYSTEM MENU 32 Installing your DVD recorder Recording audio swi
118. order does not respond to any button being pressed Resetting the machine to the default factory settings Remote control does not work 102 If you have any problems using this DVD recorder the reason may be one of the following You can also call the customer service centre in your country The telephone numbers can be found on the back of this instruction manual You can also visit our web page http www p4c philips com Have the model number MODEL NO and the production number PROD NO of your recorder ready The production number PROD NO is printed on the type plate at the back SOLUTION Recorder in initial installation mode Switch on the TV switch over to the DVD recorder socket Now the menu for language selection should appear Please read paragraph Initial Installation in the chapter Installing your DVD Recorder Dealer Mode is switched on All buttons on the front of the set are locked Switch off the function Pull out the mains plug from the wall outlet Press and hold down W and OPEN CLOSE and put back the mains plug into the wall outlet As soon as the time or appears in the display ca 6 10 seconds release Ml and OPEN CLOSE 4 vThere is no power supply check the power supply vA programmed recording Timer is currently being made If desired cancel the programmed recording Timer with STANDBY vThere is a technical problem disconnect from the main
119. order with the corresponding three component video input sockets of your TV set usually labelled Component Video Input YUV Input YPbPr YCbCr or simply YUV COMPONENT VIDEO Warning OUT Do not confuse these sockets with the five component RGB sockets if available or the yellow video CVBS FBAS socket and the two audio sockets red white The five component RGB sockets are only provided for the R G B H V signals red green blue with horizontal and vertical synchronisation impulse Please observe the colour sequence The colours of the sockets at the DVD recorder and the connectors must match those of the socket colours at the TV set red red blue blue green green If they don t the colours of the picture may get mixed up or the picture may not be visible 10 Use an audio cinch cable connect the red white cinch socket AUDIO L R OUT at the back of the DVD recorder with the mostly N red white audio input socket of your TV set usually labelled Audio in n or AV in See the instruction manual of your TV set ZK e If necessary switch your TV set to the component video input socket 3 AUDIO OUT Also consult the instruction manual of your TV set 2 The menu of the DVD recorder should now appear on the TV screen If not check the cable connections and the settings on your TV set Manual TV channel search In some cases not all of the available TV channels may have been found and stor
120. ote Control settings ins cc ccisccascsasssctescesiecs cul steansetesstaccoesndbacenisceatavenes 96 Disk feature MENU imiia ii 97 Waccess control Child Lock 98 Childlo k PDVD and VO nnana 98 Activating deactivating child lock sssssssssssresssssssessurseeerreessssssreuuueeeereeereesss 98 Authorising a diSC 00 99 Locking unlocked discs 99 Parental level control DVD video only 99 Activating deactivating parental level control essessessseesteeseeseeeseesees 99 Changing the COUNGY sisirin ians 100 Changing th PIN ede oisnean n AAs 101 Weetore you call an engineer 102 Table of contents TV lt REC OTR TIMER REC MODE PLAY MOD The remote control REC OTR STANDBY TIMER REC MODE PLAY MODE TV DVD MONITOR DIM RETURN T C SUBTITLE AUDIO ANGLE ZOOM DISC MANAGER EDIT SELECT PHOTO DISC MENU Record Record the current TV channel Switch on or off To switch set on or off interrupt menu function interrupt a programmed recording TIMER TIMER To make a TIMER programming with without ShowView or to alter or clear a programmed TIMER ENGLISH Record type Picture quality To select the maximum possible record time Playback type Choose between repeat shuffle play and intro scan TV DVD switch Switches the scart socket EXT 2 AUX I O of the DVD recorder directly to the
121. plays the entire picture in brown colors It gives the picture an antique appearance Negative Converts the picture into a black and white negative Colour negative Converts the picture into a color negative Comparable to a color negative film Black amp white Converts the picture into a black and white picture Soften Use this function to reduce picture sharpness in three steps from edge blurring to a visible blur 2 Keep pressing A until the menu bar is selected Colour Using this function you can change the red green and blue color components of the picture 1 Press V 2 Use W or A to select the corresponding color control 3 Change the color using lt 4 or P gt 4 Keep pressing A until the menu bar is selected Reset This setting will appear only if changes have already been made to the picture If you want to discard the changes confirm with OK Save This setting will appear only if changes have already been made to the picture If you want to save the changes confirm with OK Digital Photo Manager 57 Creating an album You can store pictures contained in a memory card or DVD RW R in a so called Albums in a different order Albums are binary files containing information on the orientation and storage location of the pictures Albums from a medium that cannot be recorded by the DVD recorder Picture CD CD ROM finalised DVD R will be stored in the internal memory
122. prays designed for vinyl records Can I use a CD lens cleaner in the DVD recorder This optical unit laser of the DVD recorder operates at a higher power level than the ones in normal DVDs and CD players so CD lens cleaner discs may actually damage it CD lens cleaner discs should therefore not be used Introduction Special functions of your DVD recorder eart DONA DIGITAL PHOTO MANAGER MEDIA SLOT Vrenon ER FOLLOW vy Automatic SATELLITE Recording Direct Record P index BB Picture Ba Li Screen BE L Favorite Scene Selection MP3 CD PLAYBACK se Safe Record RGB Component Video input Introduction Your PhilipsDVD recorder has a number of special functions to make it easier to use and to enhance your enjoyment Philips provides the best possible connection between your DVD recorder and other home cinema equipment ENGLISH Using the Digital Photo Manager you can view and modify JPEG pictures from a memory card Picture CD DVD or a CD ROM You can store them on a DVD RW R or on the memory card You can create slide shows and play them on a DVD player The Type 2 PC Card slot media slot allows you to use an ATA Flash Card or other memory cards using a PC Card adapter The DVD recorder is controlled by external devices receivers TV sets and so on via Cinema Link and is automatically set to the right system settings This functio
123. programme number programme name and the time are stored as the name of the recording The name of the recording can only be changed after the recording has been completed 00 00 If required press the STOP W button to interrupt playback Using A or W select the title whose name you want to edit and confirm with gt The menu for editing names appears Select Name using A or W and confirm with P Using gt or lt select the position where the letter number icon is to be changed re entered Change the icon using A or W You can switch between upper and lowercase using SELECT You can delete the character using CLEAR How can I enter the characters with the buttons 0 9 Press a number button as often as the required character or the number appears You can enter language dependent characters with the buttons K or PPI on the corresponding character e g 4 button 2 for a and then with PPI as often as appears For special characters press the button 1 repeatedly The position for the following character will be selected automatically To enter a space press the button 1 To switch over to upper case characters press SELECT To erase a character press CLEAR Repeat 4 and 5 until you have made the changes you want Save the new name with OK Storing name appears on the TV screen for confirmation To end press 4 Playing the entire title If you have hidden certain sections chapters
124. r 3 Set the start marker using OK 4 Search for the end of the scene You can also use PPI or HK to search faster for the end of the scene Make sure that you do not jump into the next title title number T Press EDIT to exit sd SS must not change Only chapters within a title can be hidden Press PAUSE II at the corresponding position 78 Managing the disc contents Managing the disc contents O Set the end marker with OK This will also be the start marker of the next chapter The number of chapters C in the menu line increases by one xThe number of chapters C has increased by two or more numbers v This is the case when you want to hide a chapter that due to automatic chapter numbering if switched on stretches over two or more chapters In this case you must delete the start of the automatically generated chapter 1 Press T C twice while the editing menu is displayed to change the chapter number O Select the chapter between the new markers using V or A Press PAUSE II Select Delete marker with W to delete the current chapter marker Confirm with OK The current chapter number decreases by one Press T C twice to change the chapter number C Select the previous chapter with W since you are already in the next chapter end of the chapter is also the beginning of the next chapter Wait until the chapter has been played and press PAUSE Il to stop playback Sele
125. r O Use CHANNEL or CHANNEL to select the programme number station name you want to record This will appear on the display 4 FEE T l T E Programme numbers of the external inputs POE EXT Scart socket at the back EXT 1 TO TV I O EXTe2 Scart socket at the back EXT 2 AUX I O CHM Front SVHS audio sockets S VIDEO left AUDIO right CHM Front video audio sockets A V S VIDEO left AUDIO right Switching between the S VIDEO and VIDEO sockets takes place automatically If a signal is available at both sockets at the same time the signal at the S VIDEO socket has priority Digital Video i Link front socket DV IN O To start recording press REC OTR on the remote control or RECORD on the DVD recorder If you want to start the recording at the end of the existing recordings hold down the REC OTR button until the message SHFE REL appears on the display For DVD R discs each new recording is always added at the end of all previous recordings as existing recordings cannot be overwritten This will for example appear in the display Manual recording 69 ENGLISH Tria A AV A LLII e Dei PEEP Insert chapter markers During recording you can mark scenes so you can find them or hide them later During recording press EDIT at the start point Inserting marker appears on the TV screen In the display the number of the CHAPTER increases by one For further information on titles and chapters see the
126. rding is made at the current disc position This is the same as for a video cassette in the middle of the tape for example By holding down the REC OTR button the recording will be made at the end of all the other recordings to avoid overwriting previous recordings New recordings on DVD R discs are always added after all existing recordings Using your DVD recorder you can record from an RGB source such as a satellite receiver using a SCART input EXT 2 AUX I O socket Video signals for the colours R Red G Green and B Blue are transmitted via separate channels This reduces the interference that occurs with standard video cables DVD ReWritable bie DIGITAL e dts DIGITAL OUT ma rovision SHOWVIEW CE The Philips DVD recorder can play back pre recorded DVDs and CDs DVDs recorded using this DVD recorder can be played back on current and future DVD players Dolby Digital is a standard developed by Dolby Laboratories for transmitting from to 5 full range channels as well as a low frequency 1 channel for a total of 5 1 discrete channels The loudspeakers are arranged front left front middle front right rear left and rear right This system is currently the most common system and is used in cinemas With this DVD recorder each soundtrack in 2 channel Dolby Digital is recorded onto a DVD RW R Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dol
127. rview As a rule the first picture of an album is used as the cover picture However you can use any picture in the album as a cover picture 1 Select New cover photo in the Album Settings using V A and confirm with OK The album will be read and a picture overview of the album will appear 2 Use V A lt Pto select the picture you want to use as the cover picture 3 Confirm with OK The new cover picture appears in the bottom left corner of the Album Settings Changing the album name You can re enter or change the name of an existing album 1 Select the Album name in the Album Settings using V A and confirm with P 2 Type the new album name using the 0 9 buttons like you would do on a cellular phone You can also move to the position where you want to enter or change a character using lt gt Change the characters with V A The Digital Photo Manager How can I enter the characters with the buttons 0 9 Press a number button as often as the required character or the number appears You can enter language dependent characters with the buttons M lt or DPI on the corresponding character e g button 2 for a and then with PP as often as appears For special characters press the button 1 repeatedly The position for the following character will be selected automatically To enter a space press the button 1 once To switch over to upper case characters
128. s OK to pan appears on the screen the zoom process is complete Press OK Using A V gt lt 4 select the part of the image you wish to view Confirm with OK QO O00 To stop the feature press PLAY and then SYSTEM MENU Select the audio language Many pre recorded DVD discs have more than one audio language The language initially selected for playback will be the one you selected when you first set up the DVD recorder However you can change the audio language of the inserted disc at any time You can change the audio language either using the menu of the inserted disc DISC MENU button or the AUDIO button The audio languages for DVD playback in the two menus may be different Please note that with some DVDs the audio language and or subtitle language can be changed only via the DVD menu 1 During playback press AUDIO 2 Select the required audio language using V or A You can also enter the number directly using the number buttons 0 9 3 Play continues in the new audio language Many pre recorded DVD discs have more than one subtitle language The language initially selected for playback will be the one you selected when you first set up the DVD recorder However you can change the subtitle language of the inserted disc at any time You can change the subtitle language either using the menu of the inserted disc DISC MENU button or the SUBTITLE button The subtitle languages in the menus may differ
129. s power supply for 30 seconds then connect again If this doesn t help you can reset your DVD recorder to the default factory settings v Important All the information stored TV channels time and date TIMER will be lost Disconnect from the mains power supply Press and hold down the STANDBY ON button on the device and reconnect to the mains power supply Release the STANDBY ON button when 5 Ty ON appears on the display All the information stored TV channels time and date TIMER will be lost Please read paragraph Initial Installation in the chapter Installing your DVD Recorder vRemote control not pointed toward the DVD recorder Point the remote control at the machine See if the o appears on the display briefly each time you press a remote control button If it does the Recorder is receiving information from the remote correctly vThere is a technical problem Take out the batteries wait for 10 seconds and put them in again v Batteries are flat Change the batteries Before you call an engineer PROBLEM Data transfer from TV set via EASYLINK does not work No playback on DVD recorder I cannot playback Super Video CDs Poor playback on DVD recorder distorted picture distorted sound No recording possible Programmed recording does not work Before you call an engineer SOLUTION v Data transfer is controlled via pin nr 10 of the scart cable It is possib
130. se disc function It is not possible to make further recordings using this disc If this disc is to be played in a DVD recorder it must not be finalised Recordings can be added and deleted The disc space playback time from the deleted recording cannot be recovered for further recordings Use the Manual recording function to spontaneously start recording e g to record a TV show already in progress In the index display select the title to be overwritten or Empty title with V A If you insert recordings between existing recordings check the lengths of the old and new recordings If the new recording is too long the subsequent recording title chapter will be overwritten Insert new recordings at the end of all existing recordings Safe Record To add a new recording at the end of the last recording on the disc hold down the REC OTR button until the message SHFE FEL appears on the display For DVD R discs each new recording is always added at the end of all previous recordings as existing recordings cannot be overwritten End of disc is reached If the end of a disc is reached during recording recording will stop and the Recorder will turn itself off automatically Please refer to section Recording without automatic switch off if you want to manually start and stop your own recording If you want to start a recording manually but have it stopped automatically read the section Recording with au
131. seests 5I 9 EY Digital Photo Manager 52 The PC PCMCIA Card Inserting the PC Card P Removing the PC Card canis scene ssscapousacostsacoassiazaonoastoscosnissstoponsbossouseacoea Showing JPEG pictures froma roll sesissssiisesiiiiisriiisiisirsisiie Editing JPEG pictures 0 ee Sie SEWN e E Advanced editing of the JPEG pictures Creatina A D a n EE KREE Adding pictures to galbi gases ccs cacti sccssscavascesoaczadenns teesteccusenssroveicniseceste Changing the picture order within an album Editing pictures inan album sis cessisccssscadscsivasssitcsccuscovincsswesttccnuendsewvsncciaecseces Making a DVD compatible slide SHOW sssscssscssesssesssecetecstersseesseessees Making a slide Show from an album secsescsssseessseseecesssesesessesseeneeseess Making a slide Show from a roll esssssessesceseseesssessssssesvssesessesseeseesvess Storing rolls albums on a DVD RW R 3 Preparing a DYDER Recs ts a cscdsscsiscs ccanesiencoiscesanedecessnnneceasebsseraneensesoese Transfer the photos to a DVD RW EAR oesesssessessessssestssseeseenteeseesees Changing roll settings 0 0 Changing the rolls name Changing the rolls date bs Calling roll overview Greet hy sscssesccscscsssssssaiscessseasessissvesbensssnusennetbooes Deleting ce Foll si ssc cceccsssscsis ceast aes n AAS Changing albumi Settings oo ccssscsssscsetssszscscassnsteceuconseessssoeisetbosussdsesca
132. snicssoers 64 Changing the gover HCH n insisii iini eeii 64 Changing the album name ssssesessssssseesssssssesssreseteeeesssssssssureeereeeressssssssreseereere 64 Charee the dlbum CG aes aides si insesi esii 65 Calling the album overview directly ssssssssssssssessssssseestesssssesseesseees 65 FOB Vie an COU seian i 65 Bee Se Be aU naonna tetera a E TAR 66 Changing the media settings ssssssscssssessecsssssesssessessssscsssssssessssseesvess 66 Problem solving for Digital Photo Manager ssssscsssecesecstersterseeessees 67 Manual FECOIAING ccccccercrrreeee 68 Ea E E E 68 Recording without automatic switch off sesssssssssrsseeersesssssssreerreeeereesssssss 69 interrupt recording PRISE insciis ressis s 70 Recording with automatic switch off OTR one touch recording 71 Preventing accidental erasing Of discs ssscesssssssssssssssseesesesseseeseeseess Lining up recordings within a title assemble cut Selecting the recording type picture quality sssssessesssessessseesteees Automatic recording from a satellite receiver Sat recording 74 Direct Record oecccisscnssstesctsstcsebcnvesabsacveatsscanveeniecnsvenssedvustuapsndsasbvelssarisesspecanendes 75 Switching Direct Record on or Off sssssssssssssssssessseseeeeeeeeereeereeeeereeeneeeeneee 76 Li Managing the disc contents 77 E a EEE E E E E E E E 77 Favorite Scene SelecUON ecnencsrree
133. ss P and then select with W A the title Empty ee wanted O Select the title Empty with A or V Browse discs Dise number O Confirm with OK Title Date Duration Charly1 01 01 03 0 28 xI see the message Insert disc number on the screen v The blank space is located on the Disc Manager disc with the displayed disc number Please insert the appropriate disc Page1 1 To select title press OK The DVD recorder rewinds to the beginning of that particular part and automatically switches to Stop Disc Manager DM 5I 52 The Digital Photo Manager Using the Digital Photo Manager you can view and modify JPEG pictures from a memory card Picture CD DVD or a CD ROM You can store them on a DVD RW R or on the memory card In addition you can store the pictures in a so called album in a specific order yet without changing the order in which the pictures are stored on the memory card Moreover you can view the pictures in a slide show at adjustable intervals Store the slide show on a DVD RW R so you can view them on a DVD player How many pictures can be organized from the DVD Recorder Since the storage size of a JPEG picture depends on different parameters quality picture information JPEG compression resolution of the camera the limitation is only the available storage capacity You can store up to a maximum of 999 photos in one album on a DVD RW R or memory card
134. ssories Operating instructions Guarantee booklet Quick install guide Remote control and batteries Aerial cable Mains cable Scart cable AV Euro cable Introduction CLASS 1 LASER PRODUCT Introduction Caution Visible and invisible laser radiation If the cover is open do not look at the beam Because of the risk of eye injuries only qualified service engineers should open the machine and carry out maintenance or repair work LASER Type Semiconductor lasers InGaAIP DVD AlGaAs CD Wavelength 660nm DVD 780nm CD Output power outside the lens 20mW DVD RW write 0 8mVW DVD read 0 3mW CD read Beam divergence 82 degrees DVD 54 degrees CD ENGLISH Danger High voltage Do not open You run the risk of getting an electric shock The machine does not contain any user serviceable parts Please leave all maintenance work to qualified personnel There are some components in the DVD recorder that keep running as long as the recorder is connected to the power supply To switch off the DVD recorder completely you must unplug it from the power supply If you disconnect the DVD recorder from the mains make sure to take the plug out of the wall socket and not just remove the connector from the v MAINS socket at the back of the unit Children could seriously injure themselves at the free live end of the cable These operating instructions have been printed on non polluting paper Please
135. tched off Data will be written on the inserted memory card or ona DVD RW R Introduction Introduction Dear Philips customer Instruction manuals are usually very dry since they are technically oriented and often poorly translated have therefore been employed by Philips to help you ENGLISH Allow me to introduce myself My name is Phil will be guiding you through the instruction manual and helping you get to know your new DVD recorder At appropriate points along the way will be providing you with the following information ay Question Problem Here will be explaining Here will be giving you Here I ll help you identify seemingly unimportant instructions on functions the cause of a problem and things that will make it easier for find a solution you to use your DVD recorder hope you have lots of fun Phil P S If you have any problems operating the machine please read the section entitled Before you call an engineer If this doesn t help you to resolve the problem please call the customer support service for your country The telephone numbers and e mail addresses can be found on the last page of this instruction manual You can also visit the website http www p4c philips com Welcome to the growing family of owners of PHILIPS equipment Thank you for buying a DVDR 77 00 02 Please take the time to read this operating manual before using your DVD recorder It contains
136. tching over 2 channel sound Some TV programmes transmit an extra audio signal in stereo in addition to the normal audio signal 2 channel sound In most cases this means that an additional language is available If a TV programme is available in say English and German German may be available as the second language To record TV programmes in 2 channel sound you can select the language you want as the default setting This setting does not become active until the sound of a TV programme is transmitted in 2 channel sound When you play back the recording you can play back the sound only in the language you used for the recording 1 Switch on the TV set If required select the programme number for the DVD recorder Switch on the DVD recorder using STANDBY ON Press SYSTEM MENU on the remote control The menu bar appears Select T symbol with lt or gt Select line Language with Wor A and confirm with the gt button Language Select line Recording audio and confirm with gt Audio Language English Select Language 1 or Language 2 with VW or A and confirm with OK Recording audio Language 1 Subtitle English Menu English Country Other To end press SYSTEM MENU 600 O OO Installing your DVD recorder 33 ENGLISH Setting the time and date If the display shows an incorrect time or the time and date must be reset manually SMART CLOCK automati
137. th the lt or P button What do the individual functions mean Menu Closes the current menu Play Starts the slide show of the album Move Changes the order of pictures within an album Erase Erases the pictures from an album The picture on the media remains unchanged Rotate Rotates pictures by 90 Hide Hides pictures for the slide show Select all Selects all pictures Cancel Discards all changes Using of the buttons on the remote Play Button PLAY MODE Erase Button CLEAR Rotate Button ANGLE 59 Making a DVD compatible slide show Using this function you can record the pictures in such a way that you can view the slide show from a roll or an album on a DVD player The slide show will be stored on the DVD RVW R as a video title If you want to store the photos in the JPEG format in addition to the video title you must prepare the DVD RW so that you can store both pictures and videos See section Preparing a DVD RW R On a DVD R you can only store either photos or videos A combination of JPEG photos and video is not possible Making a slide show from an album 1 Select the disc top symbol in the Media menu and confirm with gt Add pictures to the album as described in chapter Adding pictures to the album You can change the order of the pictures erase unwanted pictures enter a new name for an album or change the cover picture of th
138. the DVD recorder has been switched off using the STANDBY button O OO If any of the TIMER blocks are in use TIMER will light up on the recorder display 88 Programming a recording TIMER Programming recordings without the ShowView System 1 Switch on the TV set If required select the programme number for the DVD recorder ENGLISH Press TIMER on the remote control The programming method selected last is marked OO O O Timer Select line Timer programming with V or A and confirm with Timer programming the P button Date Prog Start He End nec a The information will appear on the screen 01 BBC1 20 15 21 30 M1 Select the input field with lt or P gt Enter information with W or A or with the number buttons 0 9 vA i T Selecting daily weekly recordings See Besa In Date use SELECT to select from the following options Mo Fr Repeated daily recordings from Monday to Friday Mon Repeated weekly recordings every week on the same day e g Monday Programme numbers of the EXT1 and EXT2 scart socket You can also programme recordings from external sources via scart socket EXT 1 TO TV I O EXT1 or EXT 2 AUX I O EXT2 Switching on VPS PDC in the Start input field Select the Start input field using TIMER Using SELECT switch on VPS PDC lights up If you press SELECT again you will switch VPS PDC off goes out Changing the recording qu
139. the DVD recorder and the other end into the audio input socket usually red white on the TV set usually labelled Audio in or AV in See TV operating instructions Read the next chapter Connecting additional devices on how to connect additional devices satellite receivers videorecorders to the input output sockets Switch on the TV set Switch the TV set over to the Video Audio input socket or select the relevant programme number Please see your TV s operating instructions for the programme number you need Insert one end of the supplied mains cable into the mains socket MN MAINS at the back of the DVD recorder and the other end into the wall socket The most important features of the DVD recorder will appear in scrolling text on the display After the first installation is completed this function will be switched off How you switch on this function again read in the chapter User preferences in the section standby Switch on the DVD recorder using STANDBY ON 5 Ty ON will appear on the display 17 ENGLISH Connecting additional devices GX we EXT2 oe ee vo SAT Connecting additional devices to the second scart socket You can connect additional devices such as decoders satellite receivers camcorders etc to the EXT 2 AUX I O socket When playback is started on this additional device the DVD recorder automatically connects the EXT 2 AUX I O scart socket with the EXT 1 T
140. the data of the memory card fits on the available space on the DVD RW R 4 4GB photo only 650MB photo and video Storing the album will also store the corresponding pictures O Confirm with OK SAV ND will appear on the display A bar with a time display will appear on the screen until the process has been completed The Digital Photo Manager The Digital Photo Manager Changing roll settings You can adjust various roll settings to your individual needs You can change the name and date of a roll Changing the rolls name You can re enter or change the name of an existing roll The name on the storage media will not be changed The new name will be stored additionally 1 Select Roll name in the menu Roll Settings using V A and confirm with gt 2 Type the new roll name using the 0 9 buttons like you would do on a cellular phone You can also move to the position where you want to enter or change a character using 4 gt 3 Enter the new name with the buttons V A Enter the characters with the buttons _0 9 Press a number button as often as the required character or the number appears You can enter language dependent characters with the buttons Ma or PPI on the corresponding character e g button 2 for a and then with PP as often as appears For special characters press the button 1 repeatedly The position for the following character will be selected automatically To enter
141. the index screen PEELE You can also use the K or PPI button on the front 3 Press the PLAY button This will appear on the display title chapter number elapsed time ts Tore xI can see the message EMP TYT SL v The disc does not contain any recordings Problem 4 To stop playback press STOP Ml on the remote control or W on the DVD recorder O To eject the disc press OPEN CLOSE on the front of the DVD recorder What should note when playing back _different_recording types qualities The correct recording quality M1 M2 M2x M3 M4 M6 M8 will automatically be selected during playback For more information see the section on Selecting the recording type picture quality in the chapter on Manual recording Playing an audio CD You can also use the DVD recorder to play audio CDs Insert an audio CD Playback starts automatically Audio CD display If the TV is on the audio CD screen appears automatically During playback the current track number and its elapsed playing time will show on the TV screen and on the recorder display 2 Stop playback using STOP W The number of tracks and the total time are displayed 40 Playback Playing an MP3 CD MP3 MPEGI Audio Layer 3 files are highly compressed music files Using this technology the data volume can be compressed by a factor of 10 This means it is possible to record 10 hours of music in CD quality on a single CD
142. title The maximum number of chapters per disc is 124 and 99 per title If one of these limits is reached the following message will appear on the screen Chapter limit You need to delete some markers before you can insert new ones or make recordings 1 During playback press EDITon the remote control at the appropriate point The Favorite Scene Selection menu appears on the TV screen 2 Confirm Insert marker by pressing OK Inserting marker appears on the TV screen Favorite Scene Selection Insert marker Press OK Delete marker X will appear on the screen This DVD is write protected or the disc is a finalised DVD R Subsequent changes cannot be made Delete all markers Current chapter visible Press EDIT to exit 3 To stop this function press EDIT Hiding chapters Initially all the chapters are visible You can hide chapters for playback e g advertisements or make them visible again In editing mode hidden chapters are shown darker A chapter always consists of a start marker and an end marker To hide a certain scene proceed as follows 1 Search the beginning of the scene you want to hide Press PAUSEII Press EDIT on the remote control to call the Favorite Scene Selection editing menu Favorite Scene Selection Insert marker Press OK 1 at Deleta marker The number of chapters C in the menu line will increase by one Delete all markers Current chapte
143. tomatic switch off e g not to record to the end of the disc Read the section Automatic recording from a satellite receiver if you want a recording to be controlled automatically by a satellite receiver Read the section Direct record if you want to record a programme currently being shown 68 Manual recording Recording without automatic switch off 1 Switch on the TV set and select the programme number for the DVD recorder 2 Insert a disc on which the recording is to be made This disc is then checked for content and system FERATI ND will appear on the display x Index display v A DVD RW disc has been inserted that already contains recordings Use the A or W button to select the point where the recording is to start M THIIG x The message EMPTYIiSC appears in the display v The disc inserted is a blank DVD disc xA dialog box appears asking you whether you want to delete the contents or eject the disc v The disc inserted is a DVD RW but its contents are not DVD video compatible e g a data disc Recordings on this disc can only be made if the entire disc is first deleted with the REC OTR button x The message Title limit appears on the screen if a recording is to be made v A disc may contain a maximum of 48 titles including blank titles Delete titles or change the disc If necessary use the MONITOR button on the remote control to switch to the internal tuner in the DVD recorde
144. ture of the recording Empty title 01 30 01 ENGLISH A marker will be set every 5 6 minutes if the Auto chapters function is activated in the Record settings menu This marker is known as a chapter These markers can be changed when the recording has finished Can markers be set on a DVD R disc Markers can be set on these discs if they have not been finalised It is also possible to add chapters later This means that scenes you do not want to see during playback such as commercials can be hidden or skipped During playback you can watch your recording as a continuous sequence without the hidden chapters Select from the following chapters Favorite Scene Selection to divide the title into chapters or to manage the chapters Editing recording titles name to change the recording names Play complete title to play the entire title including the hidden chapters Delete recording title to delete the relevant title and therefore also the recording Disc settings to change the general settings of the disc Managing the disc contents 17 Favorite Scene Selection In this menu you can adapt a title to suit your particular needs You can insert delete chapter markers hide chapters select a new index or split up a title Press EDIT on the remote control during recording to open this menu Insert chapter markers During recording you can set or delete chapter markers within a

Download Pdf Manuals

Related Search

Related Contents

LevelOne FCS-4041  3 b - MetroTechnic  Manual de gestão documental  合志市雨水タンク設置補助金交付要綱 平成 22 年 1 月 25 日 告示 第 1  Refrigerator - Samsung CTC Lebanon  Kenroy Home 32206AW Instructions / Assembly  MSI AE1900-B  2号物件（PDF：5262KB）  WC-E67  HP KN831UA User's Manual  

Copyright © All rights reserved. Failed to retrieve file