Philips DSR2000/00M TV Receiver User Manual
Contents
1. Change channels up by one unit Menu Choose previous parameter Mute turn the sound off on Press OK once choose 1 to 4 previous received channels Press OK twice choose a channel from channel list Menu Activate and de activate Activates MAIN MENU channel Arrangement Channel Search Satellite Selection Installation Switch to previous channel Menu Exit from current menu Switch the receiver in and out of standby mode Switch receiver from Radio to TV mode or Switch between Sat Receiver TV or TV set Change volume up Menu Increase a selected parameter by one unit Switch receiver from TV to Radio mode or Switch between Sat Receiver Radio or TV Set Change channels down by one unit Menu Choose next parameter Choose another audio channel Language choice Or opens Radio sub channels if trans mitted OPERATING YOUR UNIT 3 1 LOCAL OPERATION Open and close the flap on the front of the unit by pressing the marked area on the right hand side Local operation is by means of the keys STANDBY A and V for switching between channels upwards downwards CH as well as lt and for adjusting the volume VOL To switch between radio and TV press the STANDBY key briefly and then within one second the key for radio or for TV mode 1 2 3 4 56 5 N PHILIPS 1 Flap 5 4 and b adjust volume2. Transfer to the channel pool can be done by pressing the OK key 4 2 3 Manual input for advanced users If neither the satellite nor the transponder search mode detects the desired channel all relevant reception parameters can be set in Manual input mode Manual input is very useful e g if the reception data of the desired channel are known but it only transmits at certain times 15 16 4 3 SATELLITES The ASTRA 19 2 and Eutelsat 13 Hotbird satellites are activated as per the default factory settings Six other satellites are pre programmed but not activated If you expand your reception equipment you can make the required settings and activations for the pre programmed satellites in the Satellite menu Activate the desired satellite number e g using the number keys 1 8 and call up the Input menu using the OK key 1 2 3 4 5 Entering or amending a name Activate the NAME input field using key 7 followed by OK You can select letters upper or lower case or numbers via the W or A key You can shift the input position right or left using the gt or key After inputting the desired name the input field is deactivated again by pressing the OK key Inputting LO1 Inputting LO2 LO1 and LO2 are preset to 9750 MHz and 10600 MHz as default by the factory If the LNB LO frequencies differ from the preset values enter the relevant values here Activate using the OK key enter th
3. m A m E LIPS gt hinge betr nz Li Cr Dear customer Congratulations on choosing the Philips DSR 2000 satellite receiver These operating instructions are designed to assist you to make optimum use of the extensive range of functions of your Philips satellite receiver in order to receive digital satellite channels and services We wish you much viewing pleasure with your new Philips DSR 2000 Note This product is destined for Germany Austria Switzerland and the Benelux CONTENTS 1 SAFETY INSTRUCTION eee RR I n n n nnn 2 2 CONNECTIONS kem LER ERR WIR uh d eee RR Se 4 3 OPERATING YOUR UNIT eeeeeeeee n nnn nnn 6 34 LOCAL OPERATION 7 e ttd um os a bt es RS ares 6 3 2 REMOTE CONTROL FUNCTIONS 0 0 000 nenn 7 3 8 SELECTING THE MENU LANGUAGE nennen nn 7 3 4 CHANNEL SELECTION sssseees es 7 3 4 1 Channel selection using the number keys 0 9 A Y andlist 7 3 4 2 Last channel using the E key 0000 0 cece eee 7 3 4 3 Zapper function using the OK and 4 AWD keys 7 3 4 4 Channel management using 10 favourite lists 2 0000 8 3 5 SWITCHING BETWEEN TV AND RADIO sssll esee 8 3 6 SELECTING THE CHANNEL LANGUAGE nennen nn 9 S A ADJUSTING THE SOUND eege e sese TP nn 9 SS3BIIMER ou ose om bet Ree 9 3 9 EPG PROGRAMME INFORMATION BASIC NAVIGATOR 10 4
4. Input data rate e Bit rate e Video voltage impedance e S N e Audio decoding e Bit rate e Audio frequency range CPU Memory e 32 bit RISC CPU e FLASH e DRAM e SDRAM Power supply e Supply voltage e Power consumption LNB 400mA 18V Power consumption without LNB e Power consumption in standby Connections e Sat lF input output e TV VCR e Audio e Digital Audio Software update e via data interface separately for e via satellite separately for General information e Unit dimensions W x H x D in mm e Ambient temperature e Weight 950 2150 MHz 43 83 dBuV lt 4 5 dB DVB S standard CCIR 601 720 x 576 2 45 Msymbol s 1 5 15 MBit s 1 V 75 Ohm gt 53 dB MPEG 1 2 layers 1 2 32 44 1 48 kHz 0 04 20 kHz 60 MHz clock rate internal 2 MByte 2 MByte 8 MByte 230 V 10 15 50 Hz 25 W max 22 W typ ind 2 Cl Modules 12 W max 10 W typ 2 5 W max lt 2 W typ F socket SCART socket 2 cinch sockets 1 cinch socket a b operating programme TV channel lists radio channel lists unit adjustment RS 232 Sub D 9 channel 0 modem operation Sewn a C d a operating programme b TV and radio channel lists 335 x 68 x 280 5 C to 40 C 2kg 23 24 TROUBLESHOOTING When you have problems with your Philips DSR 2000 first check following points PROBLEM No picture no sound and no front panel display POSSIBLE CAUSE Re
5. MENU STRUCTURE 4 75A leere m nn nn 11 431 CHANNELS N on RES a en a Ms 11 4 1 1 Favourite lis et OU oos fee a ee gine o a 11 4 1 2 Changing the favourite name uaaa aaa 12 4 1 3 Channel pool for advanced users 0000 cee eee ee 13 4 1 4 Parental control o c gee eit uem s e ees 14 4 2 SEARCHMODE sssssslsle hh rr 15 4 2 1 Satellite search mode liliis 15 4 2 2 Transponder search mode llle 15 4 2 3 Manual input for advanced users 22 222222 15 4 3 SATELLITES 228 eS AeA uox Lb metes 16 44 INSTALLATION etes en Be eet eere I ala PAUL 17 4 4 1 iM Offset o actore xtate eee Dateien a ere esten murra eric 17 4 4 2 Menuslanguage asc so huge ranan ria gu ep eee ps DU PUE 17 4 4 3 oignalpaltliss x otro tenb aes Geese cans a tee natal euet qne 17 4 4 4 ENB settings nos ere uv ela eee area EU 18 4 4 5 DiSEqC Digital Satellite Equipment Control 005 18 4 4 6 Download Over Air software update via satellite 19 4 5 CA Conditional Access SCRAMBLED CHANNELS 20 4 5 1 General reimarkS ue iii uu ed pee tease ee doe o ee Dee 20 4 5 2 Receiving scrambled channels lllle eee ee 20 5 GLOSSARY nt RR Ne ERE RR RR ELE 21 6 TECHNICAL DATA 2e RR a RT ER ME 22 T TROUBLESHOOTING eeeeeeee nn nn 24 1 SAFETY INSTRUCTION Important remarks on operation The following section contains im
6. be input for TV or radio channels as required N B Please note that the video recorder must also be set to identical recording times N B Please note that the remote control is not active during timer recording to prevent accidental recording of OSD messages The volume is switched to full level during recording If the remote control is activated the channel indicator on the unit displays r E c to indicate that a timer recording is currently active The timer recording can be interrupted prematurely only via the key After interrupting the recording the display indicates End The unit then reverts to normal operation If a timer recording is started from standby mode the unit reverts to standby mode after the recording has finished 1 8 Select the next free input field using the number keys 1 8 or using the W or A keys gt 4 Select consecutively the input fields for Date Start Stop and Channel the input field is highlighted in white OK Activate the input for the selected field using the OK key the input field is highlighted in black Input the appropriate event either directly via the number keys 0 9 or by scrolling through the options using the gt 4 keys OK Confirm your selection using the OK key and select the next input field E After inputting Date Start Stop and Channel you can exit the timer menu by pressing E and quit or input further timed events You can also programme the
7. high and low band Pos A B 22 kHz switches between 2 satellites Tone burst OFF High Low activates the tone burst depending on the reception frequency Pos A B selects orbit position 1 3 or 2 4 Opt A B switches between orbit position 1 2 and 3 4 DiSEqC OFF ON Select ON if you connect the receiver to a DiSEqC compatible satellite receiver DiSEqC repeat use for cascade arrays OFF no repetition of DiSEqC signal 1 the DiSEqC signal is repeated once 2 the DiSEqC signal is repeated twice 4 4 6 Download Over Air software update via satellite You can update the operating software and the channel lists each individually for your receiver via the ASTRA satellite update via Download Over Air using the Download sub menu The data for various units are transferred consecutively on a special receiving channel thus the term data carousel To receive this data your receiving unit must be aligned with the ASTRA satellite at 19 2 east N B Please note that when updating the channel lists your own channel allocation in your favourite lists 10 each for TV and RADIO will be overwritten a Launch Software download in the INSTALLATION menu after selecting menu 6 Download using the OK key Download progresses in several stages each stage being accompanied by relevant information You can interrupt these stages at any time b Search for the download channel on the ASTRA satellite This search takes pl
8. key Vol 2 Two Cl Module slots Common Interface 6 4 and W upwards downwards Module channels key CH 3 4 Digit LED front indicator 7 D standby key 4 ON OFF switch button The LED indicator shows Radio TV selection mode for one second The unit has an on off switch with power separation The indicator for the channel number is via the 4 digit green 7 segment indicator TV channel indicator Radio channel indicator Indicator t TV mode channel number of satellite receiver N B If the unit has been switched to TV mode by means of the TV key the image on the TV unit is the one transmitted by the TV unit e g from an addi tional cable source The points are indicated if the unit is switched to mute VCR indicator During play back the video audio signal from the video recorder is automatically switched to the television unit in standby mode also VCR indicator switched through in standby mode The unit is in standby mode and can be switched on using the STANDBY key 3 2 REMOTE CONTROL FUNCTIONS Switching on from standby mode is done using the red key or using the number keys 0 9 The unit software contains a functional description for the remote control To consult this simply press the RC key on the remote control and then the keys for which you require assistance the appropriate help instructions appear on the screen Exit the help menu by pressing the RC key again The k
9. the symbol rate under point 3 has been changed to FREE 5 and then start the search mode using the OK key and select whether the search is to be for non encrypted or encrypted channels or both simultaneously select FREE or CA or FREE CA N B Some of the encrypted channels can also be received free or free at certain times Exception The encrypted ORF channels are located under FREE 4 2 2 Transponder search mode All channels of a transponder are searched for in transponder search mode 1 Satellite 2 Frequency 3 Polarisation 4 Symbol rate If the parameters satellite frequency polarisation symbol rate of the channel being searched for are known transponder search mode can then be used If for example a new channel belonging to a known channel group is launched it is sufficient to set a channel from this channel group initially via channel selection the relevant parameters are transferred to the transponder search mode If the message No signal appears in the START line reception is not possible Please check the parameters satellite frequency polarisation and symbol rate once again Search mode can be started if the Signal message appears 5 Start search mode using the OK key Encrypted channels are denoted by the symbol Channels that you do not wish to transfer to the channel pool can be deleted individually using the TV key New channels are marked by
10. timer for radio programmes in the Programme section using the R key If the data for timer programming are transmitted they can also be transferred directly to the timer via the menu EPG preview using the key 10 Deleting timer programming 1 8 Select the timer row to be deleted using the number keys 1 8or the W or A key OK anddelete the programmed data using the OK key N B If you accidentally delete a row and wish to reconstitute the original information exit the timer menu by pressing the E key twice N B The time and date are programmed from the DVB data transmitted by the channel Please correct the Time offset in the Installation menu when switching from summer to winter time and vice versa CET summer time 2 hj CET winter time 1 hj Please note that some exotic channels do not transmit correct time signals Check the date and time in the Timer programming menu when performing programming 3 9 EPG PROGRAMME INFORMATION BASIC NAVIGATOR The EPG Electronic Programme Guide contains information on current and subsequent programmes The extent of this channel related information is determined by the individual provider and varies greatly from one channel to the next Many channels are also transmitted without usable additional information SI data This is also the case for the preview Some providers do not transmit any data others already transmit a preview including additi
11. which was the original channel being viewed The zapper function notes three other alternative channels starting from the selected channel However note that only those channels that have been viewed for at least 5 seconds are stored in the memory The last 4 channels stored in this way can be accessed directly using the OK key followed by the 4 A V gt keys 3 4 4 Channel management using 10 favourite lists Digital television technology provides viewers with a wide range of channels Depending on the number of satellites that can be received up to 1000 TV and 1000 radio channels are available To manage this extremely large number who can remember several hundred channels and the associated channel numbers the user has ten custom definable favourite lists enabling him to manage and sort the channels clearly A favourite list is a list in which channels selected from a channel pool can be organised By default the names of the favourite lists are pre defined similar to the following example However the name of the favourite list can be changed according to individual preferences Each favourite list has the available channel numbers P000 P999 Favourite list Name sorted channels example Example FO ALL all free channels from the channel pool F8 ABC F9 XYZ ont E e g F1 NEWS e g PHOENIX n TV N 24 Bloomberg etc F2 SPORT e g DSF EuroSport Motors TV etc F3 MUSIC e g MTV VIVA VIVA 2 Vi
12. Automatic switching of the character set is defined in the DVB standard however unfortunately not all stations observe this standard with the result that characters from an incorrect character set may appear in a text Automatic character switching is provided in this unit however various character sets can be installed if required so that e g Greek texts are shown in the correct character set and are thus legible Selection Auto Standard Latin Cyrillic Arab Greek Hebrew 4 4 3 Signal paths Activation and modification of each individual field are following the usual procedure Select the appropriate input field XYZ using keys 0 9 or W A and activate using the OK key The parameters are set using the A or W key The selection is confirmed using the OK key 1 TV VCR Video output signals at TV and VCR SCART sockets Tl The following groups are possible in the TV and VCR sockets CVBS CVBS CVBS YC RGB CVBS RGB offers the best picture quality on the television set RGB YC You can use YC with SVHS video recorders YC CVBS YC YC CVBS Composite Video Broadband Signal FBAS Farbbild Austast Synchron Signal equals CVBS YC like S video Y brightness C croma 2 TV gt VCR Video audio return path from TV to VCR unit If ON is selected the video and audio signals are also transmitted from the TV socket to the VCR socket in standby mode In OFF position the power consumption is reduced by appr
13. Changing channel names OSD On Screen Display e Clear menu structure with variable and fixed transparency e Integrated operating instructions and functional description of remote control e Menu languages German English French Italian Spanish Dutch and Turkish EPG Electronic Programme Guide e Fast programme information concerning current and next programmes e Preview containing additional information several days in advance depending on channel e Simple transfer of data channel start time end time date to timer Video Audio e TV socket RGB YC S Video SVHS CVBS e VCR socket YC and CVBS e Automatic VCR to TV switching e Automatic TV to VCR switching in standby mode selectable e Separate cinch sockets for L R audio channels e Volume adjustable in 20 stages mute function e Language selection for multilingual TV broadcasts and selection of additional channels in radio mode e Stereo 24 Bit 96 kHz Audio Sigma Delta DAC Additional information e Local control for Channel Volume Standby and Radio TV switching e 4 digit LED indicator green e Timer for 8 events TV or radio e Optimum alignment of parabolic antenna depending on field strength and reception conditions e Tele text reinsertion for TV display RF range e Sat IF frequency range e Input level ranges e Reception threshold EB NO TV system digital e Modulation FEC demultiplexer e Video resolution e
14. S DiSEqC DVB EPG Favourite list Free GHz LNB LO MHz MPEG OSD PID PCR Pool RGB Standby SVHS Symbol rate Transponder VCR YC Zapping Frequency band of a satellite Low band and high band Conditional Access denotes encrypted channels Composite Video Burst Sync video standard for TV or VCR equipment Digital Satellite Equipment Control Digital Video Broadcast Electronic Programme Guide List of selected channels from the channel pool Freely receivable not encrypted channels Abbreviation for gigahertz giga billion Low Noise Block Converter electronic unit on parabolic antenna for receiving satellite signals Local Oscillator part of the LNB converts the satellite signal into a frequency range receivable by the receiver Abbreviation for megahertz mega million Moving Picture Expert Group standardisation body for encoding and compression of images On screen Display indication or flashing of information on the screen Packet Identification identification number for video audio videotext etc Programme Clock Reference Channel pool collection of all receivable TV and radio channels Video standard separated into 3 individual signals for red green and blue Power saving sleep mode Super Video Home System video recorder standard S Video indicates the data rate transferred per second in MS s Megasymbol second or kS s kilosymbol second A dig
15. a or cable you can switch between the channel received by your TV set or by the satellite receiver using the TV key provided that the switching impulse voltage is detected and processed by your TV set N B All channel functions available for TV last channel zapper function favourite lists channel lists and channel pool etc are also available separately for 1000 radio channels 3 06 SELECTING THE CHANNEL LANGUAGE Press the A key to display the language selection menu The number of available languages depends on the particular channel The choice of language is made as usual using the W and A keys The language originally set remains selected when you quit the menu using the E key The selected language is stored when you quit the menu using the OK key N B Please note that many channels only offer one language Many radio stations do however offer up to 20 or more sub channels These channels can be selected in radio mode also by pressing the A key 3 7 ADJUSTING THE SOUND a The volume of the receiver can be adjusted in 20 stages using the or keys The current volume level is indicated in the channel indicator b Switching the sound Q on off mute when the sound is switched off the OSD displays a message for approx 2 seconds The mute function is cancelled by pressing the volume keys 4 or again 3 8 TIMER The timer programming menu is accessed by pressing the key Up to 8 timer events can
16. ace during initialisation of the unit and may last for several minutes The next time download is launched the stored download channel is set directly C Load the receiver identification This process may also take several minutes d Depending on the availability of new data operating programme or channel lists from the data carousel the following options are offered to you Download 1 Receiver software 2 Channel lists CH selection OK e After selecting 1 Receiver software the following menu appears N B Download software version V Y Y Receiver software version V X X Continue YES OK NO E f After pressing the OK key the software version is checked If the data carousel contains an older version a message is displayed if necessary you can interrupt download prematurely Depending on the allocation rate of the data carousel data downloading may take up to one hour g Save the downloaded data N B You must not switch off the unit during this process 19 20 4 5 CA Conditional Access SCRAMBLED CHANNELS 4 5 1 General remarks To receive scrambled channels you need a Common Interface Module CI Module and a CA Conditional Access Smart Card supplied by your programme provider Please note that the Cl Modules and the assigned Smart Cards only decode the channels transmitted by your programme provider If you have subscribed to channels of several progra
17. ata directly to the timer using the key MENU STRUCTURE 4 1 CHANNELS 4 1 1 Favourite list Call up the main menu using the M key and then press the OK key twice Sorting swapping copying and deleting channels in one single menu Alle MA ASTRA19 TEC NNNM BLOC NOTE C TW1 P 000 BLOC NOTE C Das Erste P 001 BR alpha ZDF P 002 BVN Bayerisches FS Bloomberg TV German SAT1P003 CANALSAT finance RTL Television P 004 CNBC RTL2 P 005 CNN Int Super RTL P 006 Canal Canarias Select one of the favourite lists 0 9 M Select the relevant satellite e g Astra Eutelsat or other TV Select the channel source e g NEW or ALL channels V A Select the target position in the favourite list tip of grey or green arrow lt P Select the channel from the source channel list right hand window The channels are arranged in alphabetical order i Remove the current channel from the favourite list to the tray remove A Copy from the tray back into the favourite list insert OK _ Transfer the channel selected in the source to the favourite list left hand window copy Swap Place the red bar over the desired channel using the W A keys or by inputting the channel number move to the clipboard using the key select the target channel number using the W A keys or 0 9 insert using the A key done Delete Place the red bar over the channel to be deleted using the W A keys or by inputting the channel nu
18. ceiver is not plugged into the mains or is not switched on ACTION Check mains connection Press the ON OFF button on the front of the receiver No picture no sound but the front panel shows the time or The receiver is on standby Press on the 5 button on the remote control to bring the receiver out of standby No picture no sound but the indication on the front of the receiver is correct Only the main menu and the corresponding sub menus are available You cannot choose a Service You are watching TV through your UHF or VHF aerial connection The SCART connection has been made wrong The connections are right but the television is NOT connected up to the extern AV source AV 1 or EXT 1 etc The cable connections are maybe faulty damaged broken or squashed are missing There is no download list of the digital services in the memory of the receiver The receiver has not been well connected up to the dish Press the TV button on your remote control Check the SCART connection see chapter 2 Check the TV SCART connection Check all your connections and consult chapter 2 Execute all the relevant steps for installing indicated in chapter 4 Check all the items of the menu Installation antenne LNB mains LNB type LO frequence Main menu sub menus and information are available But there is no reception the screen remains black The dish does not
19. ch mode menus can only be accessed by entering the five digit PIN This is to prevent overriding the parental control function e g by deleting the marking or adjusting the blocked channels via the transponder search mode the block also cannot be overridden using the timer N B To deactivate the parental control temporarily e g in the evening you can switch the Security input field to OFF in the Parental control menu The marking is not cancelled in this mode and appears again when the parental control function is reactivated i e when the Security input field is switched to ON again 4 2 SEARCH MODE 4 2 1 Satellite search mode Satellite search mode is performed for all frequencies on the selected satellite Select the desired settings in the menu sequence Selecting the individual parameters is performed after activating using the OK key and then using the or key We recommend launching the search mode occasionally in order to detect new channels For this purpose use the basic settings shown in bold If you wish to search for one single channel individually you can shorten the search mode duration by restricting certain known parameters e g Low and 22 1 the desired satellite ASTRA gt Hotbird gt Sat 3 gt to Sat 8 2 the band Low High gt Low gt High 3 the symbol rate 224 27 5 gt 22 gt 27 5 gt FREE 4 ora free symbol rate XXXX only possible if
20. deo Italia Hit Channel etc F4 TRAVEL e g Canal Canarias Travel Channel etc F5 SHOPPING e g Home Shopping QVC Wishline ONYX etc F6 CHILDREN e g KIKA other children s channels etc F7 MISCELLANEOUS e g all channels not previously allocated e g e g The desired channels can be taken from the channel pool which contains all channels in alphabetical order and copied into the target i e one of the 10 favourite lists All free channels from the channel pool as stored by default in the favourite list 0 2 ALL Favourite list Fav 0 ALL thus corresponds to the channel allocation you may already be familiar with from satellite receivers Some of the channels transmitted by the Astra 19 and Eutelsat Hotbird 13 satellites are also already contained in various favourite lists Selecting a favourite list is done by pressing the F key and one of the allocated number keys 0 9 N B After selecting a channel the following message is displayed Number and name of favourite list currently selected TV FO ALL Mon 31 05 19 48 Channel 4 Channel name gt Satellite 1 8 19 30 20 00 News programme vw F free encrypted A two or more language channels available key A 3 5 SWITCHING BETWEEN TV AND RADIO Switching between radio and TV is done using the R or TV keys Both keys also affect the switching impulse voltage of the TV SCART socket If you also receive channels on your TV set via antenn
21. e LO frequencies using the number keys 0 9 then confirm using the OK key Please ensure that a digital compatible LNB is installed in your reception equipment Inputting the orbit position The parameter Orbit position with possible values 1 4 must be stated when operating using the DiSEqC feature Enabling ON The selected satellite is enabled for your reception equipment OFF The selected satellite is blocked 4 4 INSTALLATION 4 4 4 Time offset After switching on at the mains switch or after a power cut the time and date for the system clock timer are transferred from the data received To ensure that the time and date of the receiver correspond to local time a value for the deviation from standard time must be entered The offset value for CET summer time is 2 hours for CET winter time 1 hour Please check or if need be correct the time offset value when setting up your equipment and also when the time changes in spring and autumn 1 Select using key 1 or using the W A keys then activate using the OK key and set the desired time offset value using the keys Confirm the modifications using the OK key N B If an incorrect time offset value is entered programme times will be indicated incorrectly 4 4 2 Menu language 1 Select language The menu language can be switched between German English French Italian Spanish Dutch and Turkish 2 Select character set
22. e unit detects channels which are already stored in the current favourite list if this is the case the equal symbol z is displayed in the grey bar N B If you have accidentally deleted channels or wish to cancel the changes made then exit the menu using the E key and then press the E key again Any changes made will not be stored until you press the OK key 4 1 2 Changing the favourite name Call up the list using the OK key Select the input field NAME using the keys 0 9 or V A and activate by pressing OK You can select letters upper or lower case or numbers using the W or A key You can shift the input position right or left using the gt or key After inputting the desired name the input field is deactivated again by pressing the OK key 4 1 3 Channel pool for advanced users The channel pool contains all channels in alphabetical order Selection depending on satellite is done using the M key free or encrypted channels are chosen by pressing the TV key All free or all encrypted channels on the selected satellite are contained in the All Free section also the new free or encrypted channels after performing satellite search mode V A Select channels in rows gt Select channels in columns All selected channels are set immediately by the receiver and indicated in the background In the case of scrambled channels the relevant CA module must be provided The screen transparency can be changed using t
23. eys located around the OK key lt and A VW operate the functions Volume VOL and Channel CH in standard mode 3 3 SELECTING THE MENU LANGUAGE The menu language can be switched between German English French Italian Spanish Dutch and Turkish Press the M 4 and 2 keys to display respectively the main menu installation menu and language selection menu Press the OK key and the choice of language is made as usual using the W and A keys The language originally set remains selected when you quit the menu using the E key The selected language is stored when you quit the menu using the OK key 3 4 CHANNEL SELECTION 3 4 1 Channel selection using the number keys 0 9 A v and list The channel is set by directly entering the channel number via the number keys N B 0 is also a channel number Move back forward between the next previous channel using the A W keys A sequential list of channel numbers appears after pressing the OK key twice The desired channel can be selected using the gt and A W keys and can then be set using the OK key Pressing the OK key again or pressing the E key quits the list 3 4 2 Last channel using the E key Pressing the E key switches between the two last set channels 3 4 3 Zapper function using the OK and 4 A Y gt keys When the currently selected channel takes an advertising break many users zap between one two or more alternative channels It is easy to forget
24. he Parental control menu using key 4 from the Main menu Channels Then select the PIN input field using key 2 or the W key and activate it by pressing the OK key Enter the old and your new PIN in the following sequence 1 Please enter the current PIN 0000 0 for first use 2 Please enter the new PIN 3 Please repeat the new PIN N B Do not forget your PIN Resetting to the default settings is only possible by factory customer service All channels are accessible using the default settings you can block each individual channel against unauthorised access Marking the channels to be blocked is done either via the Favourite list or Channel pool menus using the RC key After marking the channel name is preceded by a after which the next channel is called up to enable marking of several channels by repeatedly pressing the RC key To delete the marking press the RC key again when the relevant channel is highlighted Example Sky News Super Action Super Spezial S dwest BW b Activating the parental control To activate blocking of the channels marked switch ON the Security input field in the Parental control menu and confirm by pressing the OK key when exiting the menu When calling up the marked channels you will be required to enter your own five digit PIN N B Please note that when the parental control is activated the Favourite list Channel pool and Sear
25. he F key and within 2 seconds the or key M Selection of satellite using the M key TV Selection of free or encrypted channels using the TV key iQ After pressing the MUTE key individual channels can be deleted e g channels that are no longer on the air R The channel pool activated using the M and TV keys can be managed here i e all unused channels or also all indicated channels can be deleted Cf MANAGING under point 4 5 2 i Show antenna signal and reception parameters i name Bayerisches FS ASTRA19 3e 11835 MHz Horizontal 27500 ksis 314 th Etui St 941 Ge zi IERHHHHRERHHHHHRHHHRHEHHRRR EHE HH 126 Signal Quality BERHRRHRRRHRERHRRRERRRRRRRRN worse good Signal exit If necessary you can align your parabolic antenna using the sub menu Antenna signal Turn the antenna to the optimum position in the scales indicating field strength and signal reception quality If the signal is very weak the field strength scale may also fall to O in which case you should optimise the signal using the reception quality scale If the message No signal appears and only the field strength signal is indicated the antenna may be aligned with a satellite for analogue signals which cannot be received by this receiver 13 14 4 1 4 Parental control The five digit security code PIN is set to 0 0 0 0 0 in the factory by default a Changing the security code PIN Select t
26. ital transponder is capable of transmitting several TV and radio channels simultaneously on a single transmitting frequency Video Cassette Recorder Y luminance C colour signal video signal standard for SVHS recorders Frequent switching between channels using remote control 21 22 TECHNICAL DATA Channels e 1000 storage positions for TV channels and for 1000 radio channels e 10 individually definable favourite lists each containing 1000 channel positions e g for channel types SPORT NEWS MUSIC etc e 8 satellites individually activatable e 24 characters for channel and or station names e Channel selection using 1 2 or 3 digit input e Channel selection using UP DOWN keys e Channel changing for 2 channels using one key Last Channel e Fast selection of last 4 viewed channels zapper function e Selection of channels from channel list e Channel pool arranged in alphabetical order and in accordance with satellite free new free encrypted and new encrypted channels e Copying sorting deleting of channels all in a single clear menu Search mode e Automatic satellite search mode SCPC compatible for TV and radio channels including selection of satellite high low band fixed and freely definable symbol rates for free and encrypted channels e Automatic transponder search mode detects TV radio channels on a transponder e For advanced users manual input of all reception parameters e
27. lt in incorrect operation or defects in the equipment Important remarks on location and assembly Location All electronic equipment generates heat which is however not dangerous Delicate furniture surfaces and finishes may become slightly discoloured over time due to the permanent heat source Likewise the feet of the equipment may cause discolouring on treated surfaces If need be place the unit on a suitable mat Ventilation Heat occurring in this unit is discharged adequately However never install the receiver in a cabinet or on a shelf where there is inadequate ventilation Never cover the ventilation slots of the unit Never place any objects on the unit and ensure that there is a space of at least 10 cm above the unit to ensure that any heat occurring is discharged Humidity sunlight heat Protect the unit from humidity water droplets and spraying Do not locate the receiver in the vicinity of a heating source and avoid exposing it to direct sunlight Electrical supply Operate the unit only using a power source of 230 V 50 Hz Connect the unit to the power supply and switch on only after it has been connected to the antenna and television unit Earth Ensure that the parabolic antenna is correctly earthed observing the relevant local and or CE regulations Remote control Insert the batteries supplied in the remote control Ensure that the battery polarity is correct observing the and markings in the batte
28. mber and then place it on the clipboard using the q key Exit the menu using the E key and delete using the OK key done N B Deleted channels are only removed from the favourite list but continue to be available in the channel pool and can be inserted again at any time 12 Switching to the left menu window is done using the W and A keys switching to the right menu window is done using the lt and P keys The highlighting of the windows heading and channel will show which window is active For each action copying swapping or deleting you thus see the appropriate TV channel in the current window The search function also locates channels that do not contain a usable TV channel A test picture for example may initially be detected and is thus stored by error in one of the channel lists N B The transparency of the superimposed image can be switched between variable and fixed fixed in not transparent using the F key In VAR mode the transparency can be increased or decreased using the 4 gt keys This function is very useful when sorting and copying channels as high transparency gives the user the chance to quickly decide on the type and content of a particular channel Copying Adjust the desired source channel using the 4 gt keys then locate the position in the favourite list where the channel is to be inserted using the v A keys or directly via the number keys 0 9 Press the OK key done N B Th
29. mme providers you may have to switch between several Cl Modules and or the relevant Smart Cards e Follow your programme provider s instructions regarding the Cl Module and Smart Card e Switch the unit to standby mode Open the front flap and insert the Cl Module into one of the two module slots If available insert a second Cl Module into the other module slot e Insert the Smart Card into the relevant Cl Module e The modules and the Smart Card are correctly in position if you can close the front flap easily e Leave the Cl Modules in their relevant slots The Smart Card is protected by a four digit PIN code Personal Identification Number Please observe your programme provider s instructions relating to the card After activating the CA Conditional Access menu using the OK key you can call up different information on your Cl Modules and Smart Cards The scope and content of this information is determined by the Cl Module or by the Smart Card and does not come from the receiver please note your programme provider s instructions and documentation 4 5 2 Receiving scrambled channels Depending on the satellite up to several hundred scrambled channels can be received You have two options to set up the channels of your own programme provider a Via satellite search mode e SEARCH Launch automatic channel search cf 4 2 1 by selecting CA search for scrambled channels you will thus receive all scrambled channel
30. onal information up to a few days in advance The EPG information is accessed and quit using the key a Current and next programme i shows the title start and end of the current programme and additional information on the programme depending on the provider i shows the title start and end of the next programme and additional information on the programme depending on the provider i to exit channel information again E to exit channel information immediately b Further preview and additional information i Activate the basic navigator show information on the current programme OK _ Access the preview Depending on the provider you receive a list of programmes for the current day or for several days in advance You can skip forward or backward to the desired programme row by row or page by page using the WA or gt 4 keys OK Once you have selected the desired programme you can consult additional detailed information using the OK key If no additional information is available you will receive the relevant message If the text of the additional information skips a page you can skip forward or backward row by row using the W A keys Exit the additional information display using the OK key or the E key which displays the preview again c Timer programming The data from the preview can be transferred to the recorder timer using the relevant key If a preview is available then select the desired programme and transfer the d
31. oximately 0 5 watts 17 3 4 4 4 4 1 2 N B 4 4 5 VCR signal VCR signal from VCR unit to VCR SCART socket In VCR play mode you can choose between CBVS RGB or YC S video for connecting a SVHS video recorder Picture format If the 4 3 setting is set all programmes are viewable in the 4 3 format If the 16 9 setting is set programmes transmitted in wide screen format and also those transmitted with the appropriate identification code are automatically viewable in 16 9 format However automatic adjustment of the picture width is only effective if your TV unit is equipped to process and display 16 9 formats switching voltage 16 9 6 volts LNB settings LNB ON standard setting OFF operation without LNB signal e g only with special cabling systems In standby mode OFF standard setting For certain units only use the OFF setting as otherwise the receiver continues to supply power to the LNB also in standby mode The power consumption of the receiver can thus increase from 2 watts to up to 10 watts in standby mode ON The LNB power remains on in standby mode e g to supply power to an appropriate multi consumer unit DiSEqC Digital Satellite Equipment Control In the DiSEqC menu the control signals must be set in accordance with the requirements of your satellite equipment 1 2 3 4 22 kHz signal OFF 22 kHz not active High Low 22 kHz switches between
32. portant remarks concerning the operation location and connection of the receiver Please read these instructions carefully before using the unit for the first time Extended absence use during adverse weather conditions Always switch off the unit during periods of extended absence and during thunder storms by means of the power switch located on the front right hand side This also applies to other units that are connected to the receiver Check if the timer is programmed and switch the unit on again in sufficient time for the recording Mains cable Ensure that the mains cable power supply cable is not damaged Never use the unit if the mains cable is damaged Cleaning Disconnect the mains cable before cleaning the unit For cleaning purposes use a dry cloth and only clean the surface of the unit Do not open the casing under any circumstances due to risk of electric shock if contact is made with any parts inside the unit Children Take care that children do not insert any objects into the ventilation slots due to danger of electric shock Repair Any repairs or adjustments may only be performed by qualified personnel The warranty will become void if the user attempts to open and repair the unit Improper intervention may interfere with the electrical safety of the unit The manufacturer assumes no liability for any accidents suffered by the user if the unit has been opened Connection Incorrect connection may resu
33. receive satellite signals The mains of the LNB is interrupted The received signal is too weak The dish is damaged Check the installation and the positioning of the dish Check the cable connection between the LNB and the satellite receiver Check the installation and the positioning of the dish It may be due rarely to severe or very cloudy weather Install a new dish Irregular or bad reception mosaic effect of the picture Wrong cable connections damaged broken or squashed connectors or wires A weak signal because the dish is not well positioned or is not stable Check all the connections and cables Check antenna signal Reposition the dish Fix your dish strongly The remote control does not operate There are no batteries in the remote control the batteries are nearby or completely used Check the batteries and change them eventually By normal receiving you may have a black screen when you choose some services Your are watching a scrambled Service or programme Choose another service DFU DSR 2000 01 3111 176 51051 11 02
34. ry compartment CONNECTIONS The following connections are located on the back of the unit LNE QUT psc 1 230 V 50 Hz Connect the power cable to the power socket 2 Digital Audio TV Digital coaxial audio output AUDIO TVL amp R Audio output left and right hand channel for connecting to a stereo unit 3 TV Connect the TV connection socket to your television unit using the SCART cable supplied 4 VCR VCR SCART socket for connecting a video recorder 5 DATA INTERFACE RS 232 interface for serial data transfer during servicing 0 modem cable pins 2 and 3 crossed pins 1 4 6 9 are not used Receiver PC Pin 2 RXD Sa Pin 2 RXD Pin 3 TXD Pin 3 TXD Pin 5 GND Pin 5 GND 6 SAT IF INPUT Sat IF signal input and output for LNB supply and control signals connect the cable of your satellite unit to this socket 7 SAT IF OUTPUT IF signal output e g for feeding through an analogue receiver Note The label showing the type and serial number is underneath your receiver YOUR REMOTE RC OK Detailed Remote Control func tions on screen Display OSD on off Choose favourite channel list Menu Change transparency of On Screen Display OSD Display Short and extended information if broadcasted about current and next pro grammes Activate TIMER MENU Change volume down Menu Reduce a selected parameter by one unit
35. s of the selected satellite in the Favourite list menu under New CA cf point 4 1 1 Favourite list e COPY The list in the Favourite list menu cf 4 1 1 in the right hand window is arranged alphabetically Select the channels of your programme provider using the A or W key and copy the selected channels into one or also several of your favourite lists using the OK key e MANAGING If you now have a number of CA channels in the channel pool cf 4 1 3 which are not decoded by your Cl Module you can also remove these unused CA channels from the channel pool Delete all unused channels i e all channels that you have not copied into one of the 10 favourite lists using the R key in the Channel pool menu b Via transponder search mode SETTING Refer to your programme provider s documentation for the reception parameters and enter these in the appropriate fields of the transpon der search mode cf 4 2 2 After starting using the OK key you will receive the relevant channels which you can then save in the channel pool using the OK key If the channels are spread over several transponders please repeat the process e COPY Select the Favourite list menu again followed by New CA and copy the channels of your programme provider into your favourite lists In this instance too there could also be unused CA or FTA channels if so cf above for instructions on managing them GLOSSARY Band CA CVB
Download Pdf Manuals
Related Search