Home

Philips CRT TV Handheld TV User Manual

Contents

1. Use of the menus TV Ratings Lock Your TV is equipped with a V chip This allows you to control access to individual programs based on their movie and TV ratings All settings apply to all AV inputs except AV4 TV and external sources The program content advisory data are sent by the broadcaster or program provider Select TV Ratings Lock with the cursor down A list appears showing the age based TV ratings and a corresponding content based ratings list Tap the cursor right to enter the list Select an age based TV rating with the cursor up down and enter if present the list with content based ratings with the cursor right and select one content based rating Tap OK to activate de activate the selected rating You are asked to enter your PIN See Set Change PIN p 20 If the PIN is correct the TV Ratings Lock menu reappears Select another content based rating if you like and tap OK again You need only enter your PIN once while the menu is active You can lock unlock any number of ratings on the list without re entering your PIN Each ratings item has a box graphic in front of it to indicate whether or not programs carrying that rating are currently locked a yellow colored box all items in the contents based list are locked as well a blue colored box the item is unselected a half blue half yellow colored box some content based ratings are selected unselected When All has been selected all i
2. ANT CABLE O ouT TOn OUT IN sid Connect the cable TV cable 1 to the RF IN socket of your VCR Connect another RF cable 2 from the output OUT of your VCR to the TV s ANT CABLE jack Better playback quality can be obtained if you also connect the Video Audio Left and Right only for stereo devices AV cables 3 to the VIDEO L and R AUDIO input AV1 IN jacks The MONITOR OUT connectors can be used for daisy chaining or to record programs from your TV See Record with your VCR p 37 If your VCR has an S VHS video jack For improved picture quality connect a S video cable with the S VIDEO input instead of connecting the VCR to the VIDEO jack of AV1 IN S Video does not provide audio so audio cables must still be connected to provide sound VCR and Cable Box and Cable Box Zz CABLE ANT CABLE d d Lon ovr m Fo i Cable Box Connect the cable TV antenna 1 to the cable box s IN jack Connect the cable box s OUT jack to the VCR s RF IN socket Proceed with the as above described procedure for Video recorder starting with step Connect Accessory Devices 32 VCR with other AV peripherals CABLE ANT CABLE VCR Interconnect your VCR with an extra RF cable 2 e To obtain better picture quality also connect the Video Audio left and Audio right only for stereo devices cab
3. NTSC analog video signals National Television Standards Committee format devised for TV broadcasting signals in the 1940s 525 lines 60 Hz On Screen Displays OSD Refers to the wording or messages generated by the TV to help the user with specific feature controls color adjustment programming etc Picture Freeze TV mode which allows you to freeze a certain image in order to study a specific detail at ease e g to make notes of certain program information like phone numbers Programming The procedure of adding or deleting channel numbers into the TV s memory circuits In this way the TV remembers only the locally available or desired channel numbers and skips over any unwanted channel numbers RF Radio Frequency or modulated signal design used as the carrier for television broadcasts Second Audio Program SAP Another or additional audio channel provided for in the Multichannel Television Sound MTS broadcast standard A monaural soundtrack included within the recorded or video signal usually containing a second language translation for the displayed programming Sleep Timer Function with which you can set a time period after which the TV should switch itself to standby Subwoofer A speaker designed for audio playback of only the lowest frequency notes under 100 Hz Surround Pro Logic Literally wraps you in 4 channel sound It brings your favorite movies to life with al
4. this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or television technician for help Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Philips Consumer Electronics may void the user s authority to operate the equipment Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Avis Canadien Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada Tips amp Index 3 Cosa Y Active Control A set of automatic picture improvement algorithms applied to the video image Aspect Ratio The proportions of a rectangular display screen NTSC television has a 4 3 ratio HDTV is 16 9 Aud
5. Freeze Replay Photo Finish Use of the menus Multi PIP Format not available for digital signals via AV4 Multi PIP format allows you to view multiple channels or sources at one time hearing audio from the main screen through the speakers In this menu you can select which format you prefer to see in Multi PIP PIP 3 PIP 8 or PIP 12 referring to the number of PIP screens being displayed taping the J button on the 3 3 TV control panel of the Pronto remote control Note Continuing to hold the EY button down will also cycle the TV through the various formats Select Multi PIP Format with the cursor down Tap the cursor right Select PIP 3 PIP 8 or PIP 12 with the cursor up down See Multi PIP p 30 how to operate Freeze Format not available for digital signals via AV4 Freeze Format allows you to select among three options Freeze Replay Photo Finish to be activated when you tap the freeze button on the 1 3 TV control panel of the Pronto remote control See p 7 In this menu you can select which option you prefer In Dual Screen or PIP mode the highlighted screen is frozen and cycling through the options is not possible Note Continuing to hold the freeze button down will also cycle the TV through the various formats Select Freeze Format with the cursor down Tap the cursor right Select Freeze Replay Photo Finish with the cursor up down General Settings Closed Captions General Settings Capt
6. PIP screen displays the last channel selected The following PIP screens display the channels or sources selected in the Surf list from top to bottom followed by the channels from the channel map from the lowest to the highest numbered Tap the cursor left right up down or in case of PIP 12 also cursor diagonal to highlight a PIP screen When the highlight is on one of the PIP screens it begins playing video and the other PIPs freeze The main screen always continues playing audio and video Note Multi PIP is disabled when a picture is being displayed from the AV4 source Pictures from an AV4 source will never been displayed in Multi PIP Display Format is disabled when Multi PIP is active Pressing the CHANNEL or tapping the surf button see 1 3 TV control panel or the digit buttons changes the channel or source for the currently highlighted screen If the currently highlighted screen is tuned to a channel or source already in the surf list then the next channel or source in the surf list is displayed Note channels cannot be added or deleted from the Surf list when Multi PIP is activated Tap the button or the OK button to view the highlighted screen full screen Multi PIP is dismissed Connect Accessory Devices There is a wide range of audio and video devices that can be connected to your TV The following connection diagrams show you how to connect them Video Cassette Recorder Cassette Recorder he CABLE
7. Wide Screen When in Movie Expand 14 9 Movie Expand 16 9 or Superzoom you can make subtitles visible with the cursor up down Automatic makes the picture fill the screen as much as possible Superzoom removes the black bars on the sides of 4 3 programs with minimal distortion e O ee _ _ Q e c E defghij kim O e 14 9 Movie Expand 16 16 9 subtitle Superzoom Widescreen sound mode this button to summon a list of available sound modes Stereo 3 Stereo Hall or Surround See Sound menu p 16 alt audio When you tune a channel where SAP Second Audio Program is available you can toggle between Main and SAP If not available only Main can be selected auto sound Tap this button to show a list of predefined sound settings each corresponding with specific factory settings of treble and bass You can also use the cursor up down Personal refers to the personal preference settings of sound selected in the sound menu Note The moment you are in a predefined auto sound setting and you modify a setting in the sound menu all values of the sound menu will overwrite the previously made personal auto sound settings 8 Pronto remote control active control Active Control is a pro active and automatic system The TV continuously auto picture measures and corrects all incoming signals in order to provide the best picture possible Thanks to the Ambient Light Sensor which measures
8. at least 2 free all around the TV Do not place the TV on a carpet To prevent any unsafe situations do not place any objects on top of the TV Avoid heat direct sunlight and exposure to rain or water Connect a cable TV signal to the ANT CABLE jack at the back of the TV For best picture quality use the suppressor aerial cable supplied Insert the power plug in the wall socket Refer to the rear of the TV set for the correct operation voltage Consult your local dealer if your AC power supply is different To prevent damaging the power AC cord which could cause a hazard do not place the TV on the cord Pronto Remote Control Refer to the separate full use Pronto Owner s Manual supplied for complete details on its function and operation After having inserted the 4 AA batteries into the battery compartment be sure TV is selected for the current device tab item category Turn the TV on Press the power switch T on the front of your TV or tap the power button on the first of three Pronto touchscreen TV control panels A green LED on the front of the TV lights up and the screen comes on When you switch on your set for the first time the Install menu automatically appears on the screen Follow the instructions shown on the screen to guide you through the first time setup and use of your TV To use the Pronto remote control The Pronto remote contains touchscreen displays for TV and other device related controls In t
9. inputs AND also connect a video cable to the video input in order to have correct picture reproduction Always connect the audio cables to the peripheral s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV3 jacks on the TV AV4 Digital High Definition input 4 VIDEO 10801 2Fh Prr wee E 00 O Connect Accessory Devices When you have a Digital Antenna cable connected to a digital Set top Box connect the Set top Box to the AV4 IN VIDEO 2 Fh input Connect a Set top Box with 2 Fh RGB output to the H V and B jacks and to the L and RAUDIO jacks Connect a Set top Box with 2Fh Pr Pb Y output to the Pr Pb and Y jacks and to the L and AUDIO jacks See also the manual of your High Definition Set top Box Note This television is designed to accept high definition signal standards 480p and 1080i as specified by the Electronic Industries Association standard ElA770 3 Set top boxes from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display Warning in case you notice scrolling images wrong colors or no color no picture or even combinations of these on your screen check if the connections are done in the right way for Y Pb Pr 2Fh check if the cable colors match with the input connector colors for RGB HV 2Fh check additionally if the and V cables are connected to
10. the first displayed Press and hold for 3 seconds to panel go to Setup QU Oc From Home you can choose devices to ES Refer to the Pronto manual control CN A Tap name of device to display device s control gt Ge panels A Scroll button gt CE If you get lost you can always go Home just Tap to scroll to previous control tap 1 3 panel Mute button Contrast dial Temporarily interrupt the sound Turn it to adjust the contrast of or restore it the control panel CHANNEL buttons To browse through the TV Backlight button channels or sources stored Press to switch on the control panel backlight In low light conditions Pronto switches the Direct access buttons backlight on automaticall A ee Ge m Q al Y These buttons make these whenever you tap the y p frequently used functions touchscreen 7 The backlight shuts off Fi 5 available when the automatically after a few touchscreen is off You can VIN rogram them so that they sire on ore Do o ol gt a 8 N always operate the same device It also turns on the control panel if it is not on already ES C surf O 0 X e g ae TV See the Pronto 7 manual iB i ee aa Device menu Macro menu E Open a device s control Refer to the Pronto manual panel VCR Cable PreAmp S Tuner 1 3 Control Panel number cb Shows what panel you are on In this examp
11. the light conditions of the room in which the TV is situated the contrast dynamic contrast noise reduction sharpness and color picture settings are adjusted automatically The light sensor is active when the Active Control function is switched to Medium or Maximum Tap the active control button repeatedly to show the Active Control menu with values Off Minimum Medium or Maximum Off Sharpness and Dynamic Contrast are controlled automatically Minimum Sharpness Dynamic Contrast and Noise Reduction are controlled automatically Medium Dynamic Contrast Color Sharpness and Noise reduction are controlled automatically Maximum Contrast Dynamic Contrast Color Sharpness and Noise reduction are controlled automatically Tap the cursor in the right direction while the selected Active Control setting information is on top of the screen The Active Control Demo appears The picture settings are being adapted continuously and automatically The Demo items cannot be selected The sliders will be moving showing how the TV is tweaking the current picture and dependent of the selected Auto Picture setting which is displayed above the sliders None of the sliders is user controllable Tap the OK button to switch off the Demo Note Active Control is not available for digital signals via AV4 Tap this button to show a list of predefined picture settings Each setting corresponds with specific factory settings of Contrast Brightness
12. to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Contents installation Preparation IR 4 Pronto remote control sn 5 10 Use of the menus and the menu system 11 12 Keypad on top of the TV rene 12 Installation Select the menu language serere 13 Store TV channels eei stets cepe 13 gei TV menu Picture menu aio eic eI Ete 14 15 So nd ment ica e casada oH do eed cae eU 15 17 Channels menu Channel Lock TV Ratings Lock Movie Ratings Lock ns 19 Set Change PIN scene msn 20 Settings menu Speakers AN 21 22 General Lodi ERU CR 23 27 Source Dual Screen PIP Multi PIP Connecting and selecting accessory devices Connecting external speakers amplifier sss cebada Glossary Service Warranty Information 41 43 4 ANT CABLE Preparation reparasion Do not insert the power plug in a wall socket before all connections are made Place the TV on a solid surface For ventilation leave
13. toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE NEC GROUND CLAMP e ELECTRIC SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H ANTENNA LEAD IN WIRE GROUND CLAMPS ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 Note to the CATV system installer This reminder is provided
14. you turn on your TV for the first time and no channels are stored so far the TV displays a menu nearly identical to the Install menu but disconnected from the rest of the menu system This menu also has an additional item exit with which the menu can be dismissed The menu Menu Language automatically appears on the screen The explanation appears in different languages one at time next to each language Choose your preferred language and tap the OK button on the remote control Proceed with the Picture Sound Channels Install menu Use the cursor down to select Install Install Use the cursor right to select Menu Language Use the cursor up down to select your preferred language and tap the OK button to confirm your selection Menu Language Proceed with the Install menu Install f English French Spanish Store TV channels TV channels Select Autoprogram in the Install menu Press the cursor down to select Automatic Antenna or Cable Autoprogram Note It is recommended to choose for the Automatic way of autoprogramming In case of difficulties in autoprogramming with the automatic method choose for Antenna or Cable whether antenna or cable signals are present Install Automatic Start When Automatic is selected the TV will automatically detect whether or not Antenna Start cable signal input is present When Antenna is selected the TV will detect antenna signals and will search Cable Start for all antenna T
15. 162 franc fono 1 800 363 7278 angl fono 41 Quality service is as close as your telephone Simply look over the list below for the number of a Factory Service Center near you Your product will receive efficient and expedient carry in mail in or in home service and you will receive peace of mind knowing your product is being given the expert attention of Philips Factory Service And if the phone number listed for your area is long distance call 1 800 242 9225 for Factory Service Comment obtenir notre service apr s vente rapide et efficace soit par courrier domicile ou en se pr sentant un center de service Philips Plus de 600 centers de r ception de produits R parer travers le pays contacter le center de service aux consommateurs le plus proche pour savoir l emplacement de ces d p ts dans un rayon de 50 75 miles 80 km 120 km du center de service local C mo obtener un servicio oportunoy eficiente por correo en casa o en persona para su producto a trav s de un centro Philips de servicio Mas de 600 sitios por todo el pa s para la recepci n de productos necesitados de reparaciones comunicarse con el centro de servicio de fabrica mas cercano para estos lugares dentro de un radio de 80 a 120 km 50 a 75 millas del centro de servicio local GEORGIA Philips Factory Service of Georgia 200 N Cobb Pkwy Suite 120 Marietta GA 30062 770 795 0085 FLORIDA Philips Factory Service of Florida 1911 US
16. 3 TV Control panel to summon the main menu Note When the main menu is accessed from the keypad on top of the TV it has an additional Exit item which lets you dismiss the menu TV menu Picture menu Select the menu item with the cursor up down and adjust the settings with the cursor left right Natural Motion not available for digital signals via AV4 Off the TV displays video in interlaced mode without motion compensation It reduces line flicker On Progressive 60 Hz Progressive Scan Natural Motion Line doubling eliminates line flicker motion compensation reduces jitter and offers smooth yet sharp motion reproduction On 1050i lines provides a further doubling of vertical resolution of Progressive scan which adds astonishing sharpness Note When you have selected Off the setting will be reset to On Progressive the next time you turn on the TV Brightness This control allows you to adjust the brightness level of the picture Color This control allows you to adjust the color saturation of the picture Tint not available for digital signals via AV4 and Y Pb Pr via AV3 This control allows you to adjust the color mix hue of the picture Contrast This control allows you to adjust the contrast levels of the picture Dynamic Contrast not available for digital signals via AV4 This feature automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on scree
17. AV2 IN jacks DVD Player Player DVD player with AV connectors Connect the AV cables to the DVD player s AV OUT jacks and to the TV s gt O IN jacks 5 gt 9 9 If your DVD player has an S VIDEO OUT put jack D O O m Connect the AV cables to the DVD player s AV OUT jacks and to the TV s AV3 IN jacks Connect an S VIDEO cable with the S VIDEO input instead of connecting the DVD player to the video jack OUT DVD player with Component Video Output Connectors po A Connect the three separate component video cables to the DVD player s m Y Pb and Pr jacks and to the Y Pb and Pr AV3 IN jacks on the TV Ll DVD Connect the audio cable to the DVD player s audio L and R jacks and to the L and R audio AV3 jacks on the TV DVD player with Progressive scan output 480p 2 Fh Connect the DVD player to the AV4 IN jacks on the TV See AV4 Digital HD input p 34 Connect Accessory Devices 34 Peripherals connected to AV3 e ae Lii ee Artes Ye svivco There are three possible ways to connect your Accessory Devices to the AV3 input e n case of a peripheral with CVBS output connect the video cable to the video input of the TV e n case of a peripheral with S VHS output connect the video cable to the S VIDEO input of the TV e n case of a peripheral with component video cables connect them to the Pb Pr and Y
18. Color Sharpness Color Enhancement and Dynamic Contrast You can also use the cursor up down to select the settings Personal refers to the personal preference settings of picture selected in the picture menu Note The moment you are in a predefined auto picture setting and you modify a setting in the picture menu all values of the picture menu will overwrite the previously made personal auto picture settings Pronto remote control 9 10 ev GA Page A 11 WPIX 43 Stereo cc MAIN TV PG DLSV Kids with Guns 12 47 Widescreen Surround 05 22 menu info 6 6 zoom Pronto remote control This is the third control panel of three Tap the up down left right cursor buttons to move up or down the list of controls and to make adjustments to the selected controls Tap any of the diagonal cursor buttons up right up left down right or down left to exit the current menu branch Tap the OK button to activate your choice when it is requested Tap the menu button to display cancel the on screen main menu Tap this button to display when available information about the current channel and program or source The information display is divided in two zones The upper zone presents the time and information on the current program number name video and audio formats of the incoming signal CC availability availability of alternate or secondary audio programs a plus sign appears if you have more than one c
19. Highway 301 North Tampa FL 33619 813 621 8181 WESTERN U S A Philips Factory Service Western Region 681 East Brokaw Rd San Jose CA 95112 408 436 8566 NORTH CAROLINA Philips Factory Service of N Carolina 520 G Clanton Rd Charlotte NC 28217 704 529 6330 42 TEXAS Philips Factory Service of Texas 1110 N Post Oak Rd Suite 100 Houston TX 77055 713 682 3990 CENTRAL U S A Philips Factory Service Central US 950 Buttonnote Circle Brooklyn Heights OH 44131 216 741 3334 MICHIGAN Philips Factory Service of Michigan 25173 Dequindre Madison Heights MI 48071 248 544 2110 DALLAS AREA Philips Factory Service of Dallas 415 N Main Street 107 Euless TX 76040 713 682 3990 ILLINOIS Philips Factory Service of Illinois 1279 W Hamilton Pkwy Itasca IL 60143 630 775 0990 TENNESSEE Philips Factory Service of East Tennessee 6700 D Papermill Rd Knoxville TN 37919 423 584 6614 MID ATLANTIC Philips Factory Service Mid Atlantic 352 Dunks Ferry Rd Bensalem PA 19020 215 638 7500 LIMITED WARRANTY One Year Free Labor One Year Free Service on Parts WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product is considered proof of purchase WHAT IS COVERED Warranty coverage begins the day you buy your product For one year thereafter all parts will be repaired or r
20. PIP format is selected tap the OK button to make the PIP screen movable Tap the cursor up down left right or diagonal to move the PIP screen in the direction of the cursor press Switching screens Tap the button to swap the main screen and the auxiliary screen On Screen information The On Screen information which appears when changing channels always refers to the highlighted screen To highlight a screen Tapping the cursor left right will toggle the highlight between the main screen and the auxiliary screen Change TV channels in main screen auxiliary screen and PIP screen Tap the channel up down button the digit buttons or the surf button see 1 3 TV control panel in order to change the TV channels in the highlighted screen Deactivating Dual Screen mode Tap the GB button again to return to a full main screen picture The TV tunes to the picture which was highlighted in Dual Screen mode Notes TV or Movie ratings When Dual Screen mode is activated a message with a PIN entry is summoned as TV and Movie ratings locks do not apply in Dual Screen Select with the cursor button up down whether you want to suspend V chip blocking as long as Dual Screen mode is activated or until the TV is turned off If Cancel is selected you return to normal TV viewing Channel Lock When Dual Screen mode is activated and a channel or source is locked the next channel or source is displayed Display formats When Single
21. PIP is selected but not highlighted the Display Format control works normally for the Main Screen only When Single PIP is highlighted the Display Format control in the menu is grayed and the ESB button has no effect When Dual Screen mode is selected two Display formats are supported Full Screen or 4 3 Letterbox 4 3 format with black bars above and below the picture Dual Screen or Single PIP is not available when a peripheral is selected connected to AV4 Dual Screen PIP 30 PIP 3 PIP 8 PIP 12 Multi PIP Mutti PiP In the Settings menu General p 24 you selected which Multi PIP format you prefer to see in Multi PIP Tap the E button on the 3 3 TV control panel of the Pronto remote control to toggle the selected format on or off Notes TV or Movie ratings when Multi PIP is activated a message with a PIN entry is summoned as TV and Movie Ratings locks do not apply in Multi PIP Select with the cursor button up down to indicate whether you want to suspend V chip blocking as long as Multi PIP is activated or until the TV is turned off If Cancel is selected you return to normal TV viewing Channel Lock When Multi PIP is activated and a channel or source is locked this channel or source will not appear The main screen displays the channel or source tuned before Multi PIP was activated and the highlight is on the main screen The first
22. Return your Warranty Registration card today to ensure you receive all the benefits you re entitled to Once your PHILIPS purchase is registered you re eligible to receive all the privileges of owning a PHILIPS product So complete and return the Warranty Registration Card enclosed with your purchase at once And take advantage of these important benefits Warranty Qwner Model Verification Confirmation Registration Registering your product within Your completed Warranty Returning your Warranty Registration 10 days confirms your right to Registration Card serves as Card right away guarantees you ll maximum protection under the verification of ownership in the receive all the information and special terms and conditions of your PHILIPS event of product theft or loss offers which you qualify for as the warranty owner of your model donee ARM PHILIPS Dear PHILIPS product owner Thank you for your confidence in PHILIPS You ve selected one of the best built best backed products available today And we ll do everything in our power to keep you happy with your purchase for many years to come As a member of the PHILIPS family you re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry What s more your purchase guarantees you ll receive all the information and special offers for which you qualify plus easy access to accessories from our convenient home s
23. TV Note Turn off the TV and your audio amplifier before connecting them Set the audio amplifiers volume to minimum Select Center Mode On in the Settings menu Speakers see p 21 See Sound menu Sound Mode p 15 for the available Sound modes Adjust the volume of the audio amplifier You may make use of the Test Tone function in the Settings menu see p 22 to have a reference of the loudness of the separate speakers Note Once you have adjusted the volume of the amplifier do not change it while watching TV as the whole configuration operates with the volume adjustment of your TV Surround speakers To enjoy Dolby Pro Logic Surround sound you can connect two rear speakers with built in amplifiers or an audio amplifier with rear speakers Connect the audio cables to the rear speakers and to the Dolby surround output S in the AUDIO OUT grouping at the rear of your TV as shown opposite There is only one cinch output for both speakers Use a mono to stereo adapter to connect two surround speakers Note Turn off the TV and the rear speakers before connecting them Rear Surround speakers should always be located behind or to either side of the listener at about 1 yard above the seated listener s head Adjust the volume of the rear speakers You can use the Test Tone function in the Settings menu Speakers see p 22 to have a reference of the loudness of the surround speakers in relation to the other speakers Note Once you
24. TV when you are recording through MONITOR OUT Record 37 Before Calling Service Calling Service Please make these simple checks before calling service These tips may save you time and money since charges for television installation and adjustments of customer controls are not covered under your warranty Symptoms Items to Check and Actions to follow Ghost or double images This may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may improve the picture No power Check that the television s AC power cord is plugged into the mains socket Unplug the television wait for 60 seconds Then re insert plug into the mains socket and turn on the television again No picture Check antenna connections at the rear of the television to see if it is properly connected to the television input terminal ls it properly secured to the appropriate antenna plug on the TV Possible broadcast station trouble Try another channel Adjust the contrast and brightness settings Try another auto picture setting Check the Closed Captions control Some TEXT modes could block the screen Good picture but no sound Good sound but poor color or no picture Increase the VOLUME Check that the television is not muted tap the D button on the remote control When no signal is detected the television automatically switches off the sound This is proper operation and do
25. V channels available in your local area When Cable is selected the TV will detect cable signals and will search for all cable TV channels available in your local area Press the cursor right Note All channels must be unlocked in order to autoprogram If requested enter your PIN code to unlock all channels See Channels in the TV menu p 17 The message Searching appears and the progress of autoprogramming is displayed When Autoprogramming is complete the puck navigates to Stop message appears confirming the completion together with the total number of channels found Note when you navigate to Stop before autoprogramming is complete you are given the option to continue Available channels with cable max from 1 to 125 off air max from 2 to 69 Note In case a particular channel is too weak for the autoprogramming to identify after installation is complete you should tune to that channel by using the digit keys on the remote control If the channel is not acquired a message will appear that the channel is not available Installation 13 Picture Sound Channels TV Install Settings Picture Dr Off Natural Motion On Progressive Brightness On 1050i lines Color Tint Contrast Dynamic Contrast Sharpness Color Temperature DNR Display Format Color Enhancement Auto Picture 14 Use of the menus Operation Tap the menu button on the touchscreen TV control panel of the Pronto 3
26. Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company In countries where Philips Consumer Electronics Company does not distribute the product the local Philips service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available MAKE SURE YOU KEEP Please keep your sales receipt or other document showing proof of purchase Attach it to this owner s manual and keep both nearby Also keep the original box and packing material in case you need to return your product BEFORE REQUESTING SERVICE Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE Repair must be performed by an authorized service center or a factory service center If you do not live near a factory service center contact your dealer If your dealer is an authorized service center he will arrange repair If your dealer is not an authorized service center he will direct you to the authorized service center engaged by him to service the products he sells In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular purpose are limited in duration to the duration of this express warranty But because so
27. and the buttons at the top of your TV Tap the TV button to be sure your remote control is in the TV mode Refer to the separate Pronto remote control manual for complete details on its operation and use Telephone number Philips Customer Care Center 800 531 0039 Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician 33 Before calling Service gg SSS Care of the screen Clean the TV with a slightly damp soft cloth Do not use abrasive solvent as it can damage the TV screen End of life directives We are paying a lot of attention to environmentally friendly using production methods Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials that must be disposed Please ensure that you dispose of your old TV according to local regulations How to dispose of batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations Index a active control 9 alt audio 8 amplifier 36 auto picture autoprogramming 13 auto sound 8 b bass 15 c cable box 31 camera camcorder 35 channel lock 17 channel selection closed cap
28. and the double D symbol Da are trademarks of Dolby Laboratories Licensing Corporation Manufactured under license from Dolby Laboratories Licensing Corporation Display Format not selectable for digital signals via AV4 This menu item performs the same as the button on the Pronto Remote Control See Use of the Pronto Remote Control p 6 Color Enhancement not available for digital signals via AV4 When activated this feature automatically controls green enhancement and blue stretch It makes the colors more vivid Tap the cursor right to enter the list Select On or Off in order to activate de activate Color Enhancement with the cursor up down Tap the cursor left to return to the picture menu Auto Picture This menu item performs the same as the Auto Picture item on the Pronto remote control See Use of the Pronto Remote Control p 9 Tap the cursor right to enter the list Select a predefined picture setting with the cursor up down Tap the cursor left to return to the picture menu To exit the picture menu branch tap the diagonal cursor button upright or upleft or tap the menu button Note the picture menu settings for AV4 are independent of the normal menu settings Sound menu Select the menu items with the cursor up down and adjust the settings with the cursor left right Remember control settings are at normal mid range levels when the bar scale is centered Treble Treble attenuates or amplifies the
29. ck is always present when the menu system is displayed The puck is divided into 4 wedge shaped regions They correspond to the directional controls up down left right on the remote control In this way users can navigate through the menu hierarchy to arrive at the control they wish to adjust Tapping a valid button on the remote control shifts focus from the current ball to the next one connected by a pipe in that direction Balls represent a branch of the menu hierarchy All menu items are represented by balls Each ball is identified with an identifying text label When items balls of a menu level are more numerous than can fit comfortably on the TV display only a portion of the items are shown as balls along the pipe Those omitted are indicated by a cluster of balls which indicates that there are more Pipes connect balls together and show the path the user can traverse through the menu structure Pipes represent individual branches of the menu hierarchy Interaction bars Every pathway in the menu structure leads eventually to a bar where users can set levels change values or adjust some aspect of system performance Use of the menus 11 12 Picture Sound Display Format 4 3 Use of the menus List controls A list control is used to select one or more items from a list of options For instance the Display Format option list with 4 3 Movie Expand 14 9 etc Tap the right button to move the
30. d strong language TV MA programs are designed to be viewed by adults and may be unsuitable for children under the age of 17 These programs may contain graphic violence explicit sexual activity and or crude or indecent language Channels TV All Movie Ratings Lock Movie Ratings Lock This function allows you to control access to individual movies based on their MPAA ratings Motion Picture Association of America Select Movie Ratings Lock with the cursor down A list appears showing all valid MPAA content ratings Tap the cursor right to enter the list Select a movie rating with the cursor up down Tap OK to activate de activate the selected rating You are asked to enter your PIN See Set Change PIN p 20 If the PIN is correct the Movie Ratings Lock menu reappears Each rating item has a box graphic in front of it to indicate whether or not programs carrying that rating are currently locked a yellow colored box movies with this rating are locked a blue colored box movies with this rating are unlocked When All has been selected all items on the movie ratings list become selected All movies are locked If while All is selected any other item is unselected then All is automatically unselected When NR has been selected no other item is selected When any other item has been selected all ratings below are selected as well thus all movies with those ratings will be locked NR not rated G movi
31. e sound mode according to the sound signal being broadcast Stereo This mode reproduces only the left and right front sound signals You only hear a stereo sound if the broadcast which you are receiving is transmitted in stereo 3 Stereo The sound signal is now distributed over the front left the front right and the center TV speakers The rear speakers do not produce any signal Hall The special sound signal is distributed over the rear speakers which creates a hall effect from the rear The center speaker does not reproduce any signal This mode is recommended when you wish to add surround sound to a broadcast which is not encoded Dolby Surround or to a mono signal 3D Surround 3D Surround enables you to experience the effect of Dolby Surround Pro Logic without the need of having rear speakers connected or activated Select the level of 3D Surround Effect in the Sound menu Pro Logic with Dolby Surround broadcasting In addition to the left and right internal speakers the center and the rear surround speakers reproduce the Dolby Surround Pro Logic sounds This 4 channel sound is always present in the movie or program marked with Dolby Surround This mode is especially recommended for such programs or movies With two extra front speakers connected To enhance the sound reproduction of your TV you may connect two extra front speakers via an external amplifier See Connect Accessory Devices External speakers Ampl
32. ect the various Speakers menu controls to setup the configuration of the TV s speakers system for Dolby audio playback Each trim control can be adjusted to match test tone levels Depending on the output mode and sound mode see Main Menu TV Sound Sound mode p 15 selected some menu items may be grayed out and are not selectable Center Mode See Connect Accessory Devices External Speakers Amplifier p 36 If no External Front Speakers are connected do not change the predefined factory settings which is Center Mode Off If External Front Speakers are connected select Center Mode On In this setting the center channel in surround mode is directed to all three internal TV speakers left center and right Surround Speakers See Connect Accessory Devices External Speakers p 36 If no Surround Speakers are connected do not change the predefined factory settings which is No If Surround Speakers are connected select Yes Use of the menus 2 22 Speakers Settings Test Tone Front L Trim Front R Trim Center Trim Surround Trim Use of the menus Test Tone and Trim Controls The menu item Test Tone enables you to have a reference of the speakers loudness and to adjust the level of each until they are balanced in loudness The speakers activated light up in the screen graphic Select Test tone with the cursor down Tap the cursor right Select On or Off with the cursor up down When turned On the Tes
33. enu branch tap the diagonal cursor button upright or upleft or tap the menu button Channels menu Channel Lock This feature provides the ability to prevent the viewing of a selected channel Blocked channels can still be tuned with the digit buttons only but the picture is blanked and the audio is muted Select Channel Lock with the cursor down Tap the cursor right A list with all stored channel numbers appears Select the channel you want to lock unlock with the cursor down Tap OK This summons a message that prompts you to enter your PIN See Set Change Pin below Follow the instructions on screen If the PIN is correct the channel list reappears and the color of the box graphic of the selected channel changes from blue to yellow to indicate the channel is currently locked You only have to enter your PIN code once while the menu is active Repeat to lock other channels Use of the menus 17 TV Ratings Lock 18 Picture Sound Channels TV Channel Lock TV Ratings Lock Movie Ratings Lock Set Change PIN Install Settings TV Y TV Y7 D Dialogue TV PG L Language TV 14 S Sex TV MA V Violence Age based Rating Content based Rating All none No Rating none TV Y none TV Y7 FV Fantasy Violence TV G none TV PG D Dialog L Language S Sex V Violence TV 14 D Dialog L Language S Sex V Violence TV MA L Language S Sex V Violence
34. eplaced and labor is free After one year from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the product expires the warranty on all replaced and repaired parts also expires WHAT IS EXCLUDED Your warranty does not cover labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna systems outside of the product product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Philips Consumer Electronics Company reception problems caused by signal conditions or cable or antenna systems outside the unit a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted a product used for commercial or institutional purposes WHERE IS SERVICE AVAILABLE
35. es not indicate a malfunction Check the transmission system s sound settings of this set Check if your speaker configuration corresponds with the selections made in the Speakers Setting p 21 No sound from the rear speakers or the center speakers Select an appropriate Sound mode according to the broadcasted sound signal or adjust the volume see Sound Modes p 15 Adjust the contrast and brightness setting Try another auto picture setting Check the transmission system s color settings of this set Poor picture Sometimes poor picture quality occurs when having activated an S VHS camera or camcorder connected to the right side of of your TV and another device is connected to AV1 or AV2 at the same time In this case switch off one of the other devices Snowish picture and noise Check the antenna connection Horizontal dotted line This may be caused by electrical interference e g hairdryer nearby neon lights etc Turn off the device One white line across the screen Turn off the television immediately and consult a qualified service personnel Television not responding to remote control If your problem is not solved Turn your TV off and then on again once Check whether the batteries are working Replace if necessary Clean the remote control sensor lens on the television Operating range between television and the remote control should not be more than 240 You can still use the M button
36. es with a mild content suitable for all ages PG movies for which parental guidance is recommended They may contain a few racy or violent scenes or maybe some bad language PG 13 movies for which parental guidance may be recommended if under age 13 R restricted The movies usually contain offensive sex or bad language and may be unsuitable for children under the age of 17 Parental guidance or permission needed NC 17 even with parental permission forbidden under age 17 More offensive sex violence or bad language X movies which generally focus on sex violence and or bad language Also known as pornography Use of the menus 19 20 Use of the menus Set Change PIN This function allows you to create or change a Personal Identification Number PIN in the menu Select Set or Change PIN with the cursor down If no PIN exists yet the menu item is set to Set PIN Follow the instructions on screen If a PIN has previously been entered the menu item is set to Change PIN Follow the instructions on screen All number combinations from 0000 to 9999 are valid numbers The Channels menu reappears with a message confirming that the PIN has been created Important You have forgotten your PIN Select Change PIN in the Channels menu Tap OK Tap the cursor right Enter the overriding code 0 7 1 1 Tap the cursor again and enter a new personal 4 digit PIN code The previous PIN is erased and the new PIN is stored No
37. has been spilled exposed to rain or moisture does not operate normally or has been dropped materials may be regulated due to environmental considerations For disposal or recycling information please contact your local outlet where they exit from the apparatus specified by the manufacturer or sold with the from tip over Refer all servicing to qualified service personnel Servicing is or objects have fallen into apparatus the apparatus has been This product may contain lead or mercury Disposal of these authorities or the Electronic Industries Alliance www eiae org 16 18 19 20 21 Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or the plug has been damaged or Objects have fallen or liquid has been spilled into the appliance or The appliance has been exposed to rain D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn the product Also do not endanger yourself or children by placing electronic equipment
38. have adjusted the volume of the rear speakers do not change it while watching TV as the whole configuration operates with the volume adjustment of your TV Dolby Pro Logic Surround amplifier Connect the Dolby Pro Logic Surround amplifier to the AUDIO OUT L and R at the back of your TV Select Center Mode Off in the Settings menu Speakers see p 21 The audio output is now independent of volume bass treble and Sound Mode settings Turn off the volume of the TV with the mute button iK All volume settings tone control and speaker connections have to be done via the external Dolby Pro Logic amplifier If you want to connect more devices to your TV consult your retailer Record with yourVCR with your VCR To record S VHS quality connect an S VHS peripheral directly to the VCR Record a TV program You can record a TV program using your VCR s tuner without affecting your TV Select the channel number on your VCR Set your VCR to record See the handbook for your VCR Switching channel numbers on your TV does not disturb recording Record to VCR from MONITOR OUT You can record a program on your VCR from the TV tuner via MONITOR OUT Switch on the device Select the correct channel on your TV and the correct input on your VCR Set your VCR to record You record the tuner channel of the TV even when you switch to an AV input using the select button on the remote control Do not switch channels or turn off your
39. he peripherals see p 31 G Also see Settings Source p 28 to name the AV inputs freeze See Settings menu General Freeze format p 24 where you can select among Csurf_ o three modes to be displayed when the freeze button is tapped Freeze Replay Photo Finish 13 Page Page V a When the mode is Freeze tap the freeze button to activate de activate a frozen picture The audio continues to play When the mode is Replay tap the freeze button to redisplay a few seconds of a stored video in a single PIP window Tap the OK button in panel 2 or 3 to display a few seconds of a new stored video picture When the mode is Photo Finish tap the freeze button to display 12 PIP windows of stored video pictures Tap the OK button in panel 2 or 3 to display a new series of frozen pictures Note continuing to hold the freeze button down will cycle the TV through the various modes Freeze Replay Photo Finish Tap again to return to live picture MO _ Tap the number buttons to select a TV channel surf With this feature you can easily switch between different TV channels sources that currently interest you In the menu system you can set surf to two or nine channel See Settings General Surf p 23 Tap this button to select the previously viewed TV channel or source in case of a Two channel surf or to select the surf ring in case of a Nine channel surf In case of a Nine channel surf a list appears at the right
40. high frequency response of the audio output signal Bass Bass attenuates or amplifies the low frequency response of the audio output signal Sound Mode The Sound mode feature allows you to select the way that your TV plays audio that it receives from broadcast signals or from external inputs Each mode plays the audio in different configurations depending on the speaker configuration and the sound signal being broadcast The graphical representation of the TV speakers is displayed and updated according to the selected Sound Mode Speakers which are active are highlighted Refer to the Main Menu Settings Speakers menu see p 21 for the settings of the speaker related controls and to Connect Accessory Devices Connect external speakers p 36 for the speaker configuration In order to receive the full reproduction capability of true Dolby Pro Logic Sound you should include the proper use and arrangement of surround speakers not supplied When item Surround speakers in the speakers menu is set to No the Sound Modes Hall and Pro Logic are grayed out and can not be selected Use of the menus 15 16 Use of the menus Select Sound Mode with the cursor up down Enter the list of Sound modes with the cursor right As you select an item of the list a graphic appears to the right illustrating the speakers configuration The illustration is updated according to the chosen speaker setup and the selected sound mode Select th
41. his instruction manual we will only deal with the TV control panels For instructions on other devices you can use the Pronto for refer to the Pronto manual supplied Use the Pronto s touchscreen buttons to access and adjust the TV as well as perform on screen menu adjustments and select other program functions Dh e Gently tap anywhere on the Pronto touchscreen with your finger to display its control panel for use Note Tap the Pronto touchscreen with the tip of your finger or even with your finger nail for best result To use the touchscreen simply tap the images you see on the screen Note there is no need to turn the touchscreen off It shuts off automatically to save power To change how long the display stays on see the Pronto manual TOUCHSCREEN USE CARE ap the touchscreen gently when using the Pronto Never use force Do not use pens or any sharp object to tap the screen You might damage the surface Keep the touchscreen dry Wipe off any spills immediately Never immerse the Pronto in water or any liquid Do not drop the Pronto on hard surfaces or drop anything on the LCD touchscreen itself Do not expose the Pronto to extreme temperatures Clean the touchscreen with a soft cloth dampened slightly if needed Never use abrasives or cleaning solutions Preparation 5 Pronto remote control remote control Home Pronto icon 10 05am 3 P gt ej Cm When Pronto is new it is
42. hoice ratings and program title if available The lower zone presents information about the currently selected settings display format sound mode and if on the sleep timer icon and the minutes remaining Dual Screen PIP on off See Settings General menu p 23 and Dual Screen PIP p 29 Switching screens in Dual Screen or PIP See Settings General menu p 23 and Dual Screen PIP p 29 Multi PIP Tap amp to turn on off Multi PIP The Multi PIP format that launches on the button press is determined by the selection you made in the Multi PIP Format list in the General menu see Settings General p 24 and Multi PIP Format p 30 Note Continuing to hold the EY button down will cycle the TV through the various formats PIP3 PIP8 PIP1 2 launching a new format after each second the button is held down Tap the J button again to return to a full main screen picture Tap the zoom button to activate the zoom function Tap the OK button repeatedly to select one of the zoom magnifications x1 x4 x9 x16 Additionally you can shift the selected zoom window over the screen with the cursor buttons up down left right or in a diagonal way The zoom window is reset after selecting another TV channel another display format or when another display format is selected automatically Zooming is disabled in Dual Screen mode Tap the zoom button again to deactivate the zoom function Picture TV Off On Progressive O
43. hopping network And most importantly you can count on our uncompromising commitment to your total satisfaction All of this is our way of saying welcome and thanks for investing in a PHILIPS product Sincerely lt gt Robert Minkhorst PS Remember to get the most from your PHILIPS product President and Chief Executive Officer you must return your Warranty Registration Card within 10 days So please mail it to us right now Know th ese A This bolt of lightning indicates uninsulated material within your unit which may cause an electrical shock For the safety of everyone in your household please do not remove product covering safetysym bols A The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems OR MOISTURE CAUTION To prevent electric shock match wide blade of plug to wide slot and fully insert RISK OF ELECTRIC SHOCK DO NOT OPEN Pe CAUTION A WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS ATTENTION Pour viter les chocs lectriques introduire la lame la plus large de la fiche dans la borne INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL her correspondante de la prise et pousser jusqu au fond Let make things better INTERNET ADDRESS http llwww phil
44. ifier p 36 In the Sound modes Hall and Stereo the internal TV speakers do not produce any sound if your amplifier is turned off Note If extra front speakers are connected the external amplifier has been turned on and Center Mode On is selected in the Speakers menu all internal TV speakers produce center sound in the surround modes Pro Logic 3 Stereo and 3D Surround Sound TV Alt Audio 3D Surround Effect Headphone Volume Auto Sound Picture Sound Channels TV Channel Lock TV Ratings Lock Movie Ratings Lock Set Change PIN Install Settings Alt Audio When you tune a channel where SAP Second Audio Program is available you can toggle between Main and SAP Tap the cursor right to enter the list and make your preferred audio selection with the cursor up down If SAP is not available only Main is selected 3D Surround Effect When you have selected 3D Surround as Sound mode the menu item 3D Surround Effect appears in which the level of the 3D effect can be selected Maximum Medium Minimum or Off Headphone Volume See Connect Accessory Devices p 35 for the connection of the headphone Auto Sound This menu item performs the same as the auto sound item on the remote control See Use of the Pronto Remote Control p 8 Tap the cursor right to enter the list Select a predefined sound setting with the cursor up down Tap the cursor left to return to the sound menu To exit the sound m
45. ing video and playing audio from the selected source When you select AV1 AV2 AV3 AV4 or SIDE a list appears allowing you to identify which type of peripheral is attached to this input The name selected is automatically added to the source in the Select list Once you have named the source e g VCR this source will automatically be selected when your Pronto remote control is inVCR mode see p 7 and when you tap the source button on the remote control Tap the menu button on the remote control to turn off all menus on screen Tap the source button on the 1 3 TV control panel of the Pronto remote control The Source Select menu appears in which you may select a source or peripheral connected to be displayed on screen Dual Screen PIP Screen PIP Tap the GB button on the 3 3 TV control panel of the Pronto remote control to turn on or off Dual Screen or Single PIP according to the format selection made in the Dual Screen Format list in the General menu See Settings General p 23 Audio from the main screen the left screen in Dual Screen and the full size screen in single PIP plays to the speakers Audio from the right screen or from the single PIP plays to the headphones Note Continuing to hold the button down will cycle the TV through the various formats Dual Screen Large PIP Medium PIP Small PIP launching a new format after each second the button is held down Making the PIP screen movable When a single
46. io Video Inputs Located on the rear of the TV these connectors RCA phono type plug are used for the input of audio and video signals Designed for use with VCRs or other accessories in order to receive higher picture resolution and offer sound connection options Audio Output An adjustable audio output which allows for volume variations at the source Auto Picture and Sound Controls Buttons on the remote control to select predefined picture and sound settings Coaxial Cable A single solid antenna wire normally matched with a metal plug F type end connector that screws or pushes directly onto a 75 Ohm input found on the Television or VCR CVBS Stands for Composite Video Blanking Sync At this level the color luminance and synchronization information are combined in one signal The audio signal is transferred separately Display An on screen message or graphics that help the user operate and adjust TV feature controls See On Screen Displays OSD 40 Glossary LED Light Emitting Diode or indicator Menu An on screen listing of feature controls shown on the TV screen that are made available for user adjustments MPAA Motion Picture Association of America Multichannel Television sound MTS The broadcast standard that allows for stereo sound to be transmitted with the TV picture Natural Motion Philips Technology that makes movement on television less jerky and appear more natural
47. ion Service On Off On with Mute CC 1 2 3 4 T 1 2 3 4 Closed Captions Closed Captioning allows you to read the voice content of television programs on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in progress Captions will appear on the screen during captioned broadcasts Note The captions do not always use correct spelling and grammar Not all TV programs and product commercials are made for broadcast with Closed Caption information included Refer to your area s TV program listings for the TV channels and times of Closed Caption shows The captioned programs are usually noted in the TV listings with service marks such as CC Select Closed Captions with the cursor down Tap the cursor right Select On Off or On with Mute When On is selected the TV will display the currently displayed Caption Service assuming that the service is available in the broadcast When Off is selected the TV will not display Closed Captions information When On with Mute is selected the TV will display the currently selected Caption Service when the mute function is active When the mute function is not active the TV will not display Closed captions information Note When Dual Screen Format is selected Closed Captioning if activated appears for the main screen only and it covers the full screen When Multi PIP12 is acti
48. ipsusa com DU Ov UA 10 11 12 13 14 15 IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong are provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point Only use attachments accessories specified by the manufacturer Use only with a cart stand tripod bracket or table apparatus When a cart is used use caution when z moving the cart apparatus combination to avoid injury Unplug this apparatus during lightning storms or when unused for long periods of time required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid
49. l the realism and impact of cinema sound as though you are part of the action S Video Input Allows direct connection of high resolution video sources such as a Super VHS videocassette recorder Laser Disc player etc Provides improved picture resolution sharpness and clarity Tint TV function to modify the general color balance between cool and warm and to adjust it according to your personal preference Philips Consumer Electronics Company Factory Service Center Locations Luc ndr Detroit Toledo ZA Cleveland 4 N Ohio San Krancisco Metro Chicago CoJumbus Y Kay Ss 7 Los Angeles HD e Charlotte Pittsburgh WV Area cs Knoxville E Tennessee Philadelphia S New Jersey Atlanta N Georgia Dallas Wash Balt Orlando Houston Galveston Tampa W Florida Indicates In Home Service Only Beaumont Austin at Myers SW Florida 1 800 242 9225 vom antonio Miami SE Florida Indicates In Home Carry In Service Note If you reside in one of our Philips Factory Service Branch areas see directory on back you can contact the nearest Service Branch to obtain efficient and expedient repair for your product If your product is In Warranty you should have proof of purchase to ensure No Charge Service For Out of Warranty service call the location nearest you Nota Si vous r sidez dans une des r gions desservies par une succursale de service apr s vente du fabricant Phi
50. le the first of VOLUME three TV control panels Left and right buttons 1 Press or to adjust the Press the left button to scroll to volume previous control panel the right button to scroll to next panel 10 05am 42 Scroll button Tap to scroll to next control panel Functional TV Control Panels Besides the Home page control panel the Pronto Remote Control contains three control panels for the TV For panels related to other devices refer to the Pronto manual 6 Pronto remote control TV control panels on the Pronto Remote Control When you first tap the touchscreen Home is displayed Here you ll find a button for selecting the devices that Pronto is set up to operate If you get lost you can always go Home Just tap the button Tap one of the 10 05am buttons to choose a device 75 Tap the TV b ep GD a 1 This is the first control panel of three Macro menu refer to the Pronto manual V 1 J 1 Ceo DCE Tap to return to the Home control panel Tap the arrow up to proceed to the previous control panel the arrow down to proceed to the next control panel TV You are in TV mode power the power button to turn on the TV The TV is never fully powered off completely unless it is physically unplugged When the set is turned off no LED lights up source Tap repeatedly to select TV SIDE AV1 AV2 AV3 or AV4 according to where you connected t
51. les 3 to the VIDEO L and R AUDIO input AV2 IN jacks Note See Connect Video Cassette Recorder on previous page Note AV1 IN can handle CVBS and Y C AV2 IN CVBS AV3 IN CVBS and Y Pb Pr and AV4 IN digital signals of a digital HD receiver SIDE can handle CVBS and Y C Satellite Receiver Receiver AVI AV2 MONITOR IN IN OUT OUT SAT IN VIDEO LAUDIO gt gt D m ooooo O Connect the satellite antenna cable O to the satellite receiver s SATELLITE IN jack Connect the Video Audio left and right only for stereo devices cables O to the VIDEO L and AUDIO input AV1 IN or AV2 IN jacks If your satellite receiver has an S VHS video jack For improved picture quality connect a S VHS video cable with the S VIDEO input instead of connecting the satellite receiver to the VIDEO jack of AV1 IN Connect Accessory Devices Satellite Receiver with aVCR CABLE 1 IN Peon ANT CABLE T SAT IN ou o Connect the cable TV cable 1 to the RF IN socket of your VCR Connect another RF cable 2 from the output of your VCR to the TV s ANT CABLE jack Connect the satellite antenna cable to the satellite receiver SATELLITE IN jack C Connect the AV cables 4 to the satellite receivers AV OUT jacks and to the VCR s AV IN jacks o Connect the VCR s AV OUT jacks 5 to the TV s AV1 or
52. lips voir liste ci dessous vous pourrez contacter la branche de service apr s vente la plus pr s de chez vous pour obtenir un service apr s vente rapide et efficace Si le produit est sous garantie il suffira de pr senter une preuve d achat pour b n ficier d un service sans frais Pour les produits non couverts par la garantie contactez le center le plus pr s de chez vous Nota Si Ud reside en una de nuestras zonas para sucursales Philips de servicio al de f brica ver directorio m s abajo Ud puede comunicarse con la sucursal de servicio m s cercana para obtener una reparaci n oportuna y eficaz de su producto Si su producto est todav a bajo garant a Ud debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio Para servicio despu s del vencimiento de la garant a llame al lugar m s cercano de los abajo indicados In Canada How you can obtain efficient and expedient carry in mail in or in home service for your product Please contact Philips at 1 800 661 6162 French speaking 1 800 363 7278 English speaking Au Canada Comment obtenir le service apr s vente pour les produits apport s ou envoy s par la poste notre center de service ou le service domicile Veuillez contacter philips 1 800 661 6162 Francophone 1 800 363 7278 En el Canad C mo recibir servicio efficiente para su producto en persona por correo o a domicillo Favor de comunicarse con Philips al 1 800 661 6
53. me information is available via the local PBS channel The On Timer function allows you to set a time to power your TV on automatically at a certain time of day It can be set to work once or daily at the same time The TV will turn on at the channel which was tuned when it was turned off Select On Timer with the cursor down Tap the cursor right Select Once Daily or Off to set the On Timer for one time operation daily operation or Off When you have selected Once or Daily tap the cursor right Enter the time with the digit buttons or with cursor up down Also enter AM A or PM P with the cursor up down Invalid digits can not be entered Tap the OK button to return to the On Timer menu item If a valid hour has been entered and the minutes are left blank 00 is automatically entered for the minutes spaces Note If the On Timer has never been set then the number entry spaces are dash marks If the On Timer has been set at any time previously then the time last saved is shown even if the On Timer is set to Off Time Zone This function allows you to select your local time zone Broadcasted time information will correct the clock display for your local time Select Time Zone with the cursor right Select your local time zone Daylight Saving Daylight saving time is automatically set by specially broadcasted signals This menu item allows you to disable the automatic setting of daylight saving time This is usef
54. me states do not allow limitations on how long an implied warranty may last this limitation may not apply to you In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Philips is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of the possibility of such damages IF YOU HAVE QUESTIONS IN CANADA Please contact Philips at 1 800 661 6162 French speaking 1 800 363 7278 English speaking REMEMBER Please record the model and serial numbers found on the product below Also please fill out and mail your warranty registration card promptly It will be easier for us to notify you if necessary MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province Philips Service Company P O Box 2976 Longview Texas 75606 903 242 4800 43
55. n 1050i lines Natural Motion Brightness Color Tint Contrast To use the menus and the menu system Tap the menu button on the third touchscreen TV control panel of the Pronto to summon the main menu Picture Sound Channels TV Install Settings Exit Note Should your Pronto remote control be lost or broken you can still use the keys on top of the TV E g press the M key to summon the Main menu The M key functions as both Menu and OK on the remote control The Main menu contains the item Exit to dismiss the menu only when you turn on your TV for the first time or when the Main menu is summoned with the M key on top of the TV Tap the up down cursor buttons to select the TV Install or Settings menu Tap the left right cursor buttons to select the menu item Tap the up down cursor buttons again to select the control you want to select or to adjust For instance see Picture menu Tap the menu button again to turn off the main menu The menu system Pipes balls and a puck The hierarchy of menus and controls is represented by an animated visual mechanism of pipes balls and a puck Unlike a map however the animated mechanism constantly shows the current whereabouts continually expands the view of the immediate neighborhood and preserves a view of places left behind The puck represents the user s point of focus by surrounding the ball indicating the user s current position in the menu hierarchy The pu
56. n changes Normally select Medium In certain circumstances it may be preferred to select Minimum Maximum or Off Tap the cursor right to enter the list Select one of the settings with the cursor up down Tap the cursor left to return to the picture menu Sharpness not available for digital signals via AV4 This control allows you to adjust the edge definition of a picture Color temperature This control allows you to select from TV channels the color temperature of the TV picture Tap the cursor right to enter the list Select Normal Warm or Cool with the cursor up down Tap the cursor left to return to the picture menu DNR Digital Noise Reduction not available for digital signals via AV4 This feature automatically filters out and reduces the image noise and improves picture quality when receiving weak analog video signals Tap the cursor right to enter the list Select Off Minimum Medium or Maximum according to the image noise present with the cursor up down Tap the cursor left to return to the picture menu Picture Natural Motion Brightness Color Tint Contrast Dynamic Contrast Sharpness Color Temperature DNR Display Format Color Enhancement Auto Picture Sound TV Treble Stereo Bass 3 Stereo Sound Mode 3D Surround Hall Pro Logic Alt Audio 3D Surround Effect Headphone Volume Auto Sound surrounp LOGIC Dolby Pro Logic
57. n to toggle between the current and the previously selected channel Select Nine Channels if you want the surf button to summon a list of up to 9 channels which can be selected or cycled through See the first of three TV control panels p 7 Dual Screen Format not available for digital signals via AV4 The Dual Screen and Single PIP functions allow you to view two TV channels or sources at one time hearing audio from the main screen through the speakers and audio from the other screen through the headphones This menu allows you to select the preferred format which can then be displayed toggling the button on and off on the 3 3 TV control panel of the Pronto remote control See Dual Screen PIP p 29 Select Dual Screen Format with the cursor down Tap the cursor right Select Dual Screen Large PIP Medium PIP or Small PIP with the cursor up down When Dual Screen is selected and Dual Screen mode is activated from the remote control QB button the TV splits the screen into two equally sized screens When a PIP mode is selected and Dual Screen mode is activated from the remote control B button the TV shows a full screen of video with a small medium or large window of video on top of it Note Continuing to hold the QB button down will also cycle the TV through the Dual Screen and the various PIP sizes Use of the menus 24 General Settings Multi PIP Format PIP 3 PIP 8 PIP 12 General Settings Freeze Format
58. puck into the list At least one item is the current value and is highlighted as such Moving the puck up or down with the up down button causes the list to move down or up A single value list allows only one item to be selected at one time and de selects another In a multi value list any number of items can be selected even allowing more to be selected They are represented by a checkmark in the box next to the label E g TV Ratings lock Confirmation prompt or OK buttons A confirmation prompt is a puck and ball with a task label on the left and sometimes additional text info on the right Tap the OK button to proceed Keypad on top of the TV on top of the TV Should your Pronto Remote Control be temporarily unavailable or lost or broken the keypad on top of the TV allows you to summon and to navigate the Main Menu to tune TV channels and to control the volume Press the M key to summon the Main Menu and to confirm the selection made same function as the OK button Press the P or keys to navigate up down in the menus Press the 21 or keys to navigate left right in the menus Navigate to Exit and press the M key to dismiss the Main Menu When the Main Menu is not displayed the P or keys enable you to select the TV channels the _4 or keys to adjust the volume Installation Select the menu language the menu language Select the third TV control panel on the Pronto Tap the menu button When
59. side of the television screen On top the most recently added The puck is on the channel number currently viewed Tap the surf button again to tune to the next channel in the list or go to panel 2 or 3 and tap cursor up down to select the desired TV channel of the list Tap the OK button or wait for the time out to dismiss the Surf list To add a new channel tune to the channel or source you wish to add Tap the surf button Tap the cursor right to add If there are already nine channels sources in the list the one at the bottom of the list will be removed To remove a channel select the channel number you want to remove Tap the surf button Tap the cursor right to remove Tap the OK button in panel 2 or 3 or wait for the time out to dismiss the Surf display Pronto remote control 7 roosa UY T 213 This is the second control panel of three Tap the up down cursor to select a list item sound mode Tap the right cursor button to adjust the selected list item Tap the OK button to activate the selection made or to switch off the Active alt audio Control menu auto sound O nal ED Tap this button to summon a list of available display formats for showing video images in the traditional 4 3 proportions auto picture Tap this button repeatedly or tap the cursor up down to select another display format Automatic Superzoom 4 3 Movie Expand 14 9 Movie Expand 16 9 23 Pev 16 9 Subtitle
60. t Tone control generates a sound test signal that circulates through the individual active speakers in a clockwise direction and is meant to be used with the adjustable trim controls Once turned on the Test Tone will continue to circulate through the Left Center Right and both Rear speakers if present Tap the cursor left Tap the cursor up down to select the desired speaker for individual volume level adjustment Tap the cursor left right to adjust the trim level Continue and select the other speakers for adjustment as desired Tap the cursor up to return to the Test Tone menu item when speaker adjustments are complete and turn the control Off General Settings Menu Background Surf Dual Screen Format Multi PIP Format Freeze Format Closed Captions Caption Service Sleep Timer On Timer Time Zone Daylight Saving Tilt Adjust Reset AV Settings General Settings Dual Screen Format General This menu allows you to change various settings that are presumably adjusted less frequently than most other settings Menu Background Select Menu Background with the cursor down Tap the cursor right Select On or Off to turn the Menu Background on or off Surf With this feature you can switch between Two channel and Nine channel surf behavior Select Surf with the cursor down Tap the cursor right Select Two Channels or Nine Channels with the cursor up down Select Two Channels if you want the surf butto
61. te The overriding PIN code only works in the Set Change PIN menu If you have entered the overriding code incorrectly return to the Channels menu Select Change PIN again and enter the overriding code correctly Install Speakers General Source Settings Speakers Settings Center Mode Surround Spkrs Test Tone Front L Trim Front R Trim Center Trim Surround Trim Availability of Speaker menu items Center Mode O o e e Surround Spkrs ome Test tone e e c e Front L Trim c O c e a Front R Trim e o o a o Center Trim a e a Surround Trim e a o o d gt e e S B S d 2 Settings menu This menu allows you to access to settings that are typically set only once or are changed rarely and which are not related to the installation of the TV channels The Speakers menu reflects the speaker related controls The General menu allows you to change settings that will typically be accessed only occasionally The Source menu allows you to select a source and or to name each input source Speakers In order to receive the full reproduction capability of true Dolby Surround Sound you should include the proper use and arrangement of the speakers via the TV and its internal Front Right Center and Left speakers and two amplified rear surround speakers connected to the back of the TV or via the Variable Line Out connectors and an external Dolby amplifier See External Speakers Amplifier p 36 Sel
62. tems in the age based and in the contents based lists are locked If while All is selected any other item either an age based or content based item is unselected then All is automatically unselected No Rating is the selection for items that either have no rating information or have a rating of None When this is selected programs without a rating will be locked When an item on the age based list is selected all items below that item of the same group are locked as well When you select a content based rating all identical content based ratings in the younger age based categories are also selected TV Y appropriate for children of all ages with themes and elements suitable for children aged 2 6 TV Y7 programs designed for children age 7 and older TV Y7 FV programs include fantasy violence more intense than other programs in the TV Y7 category TV G programs suitable for all ages These programs contain little or no violence no strong language and little or no sexual dialogue or situations TV PG programs contain elements that some parents may find unsuitable for younger children and which may need parental guidance The program may contain moderate violence sexual dialogue and or situations and some strong language TV 14 programs contain elements that may not be suitable for children under 14 years of age These programs include one or more of the following intense violence intense sexual situations suggestive dialogue an
63. the respective H and V input connectors and if necessary exchange both connections Camera and Camcorder and Camcorder Connect your camera or camcorder to the AV inputs at the right side of your TV Connect the device to VIDEO and AUDIO L for mono devices For stereo devices also connect AUDIO R S Video quality with an S VHS Hi 8 or Digital camcorder is obtained by connecting the S Video cables with the S VIDEO input 1 instead of VIDEO 2 and AUDIO inputs 3 Note If you prefer you can also connect the camcorder to one of the TV s rear AV IN jacks Headphones Insert the plug into the headphone socket f at the right side of the TV Press the KK button on the right side on the remote control to switch off the internal speakers of the TV The headphone impedance must be between 8 and 4000 Ohms The headphone socket has a 3 5 mm mini stereo jack In the SOUND menu select Headphone volume to adjust the headphone volume Connect Accessory Devices 35 36 Connect External Speakers Amplifier AUDIO OUT o AUDIO OUT poo Connect Accessory Devices Stereo amplifier and two extra FRONT speakers To enhance the sound reproduction of your TV you can connect two extra speakers via an external amplifier Connect the audio cables to the audio input of your amplifier and to the AUDIO OUT L and R jacks at the back of your TV The output level is controlled by the volume control of your
64. tions 25 d daylight saving 27 display format 15 display information 10 Dolby Pro Logic 16 dual screen PIP 29 DVD 33 dynamic contrast 14 e external speakers 36 f freeze format 24 front speakers 16 headphone 35 keypad on top of the TV 12 m menu language 13 movie ratings 19 multi PIP 50 mute n natural motion 14 on timer 26 p picture adjustments 14 pronto remote control 6 r rear surround speakers 36 recording 37 reset AV settings 27 s SAP 17 satellite receiver 33 set change PIN 20 sleep timer 26 sound adjustments 15 sound mode 16 source select 7 28 speakers 21 stereo 16 store TV channels 13 surf 7 S VHS 37 t test tone 22 tilt adjust 27 time zone 26 treble 15 trim control 22 turn TV on 4 TV ratings 18 video cassette recorder 31 volume 6 Z zoom 10 Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If
65. ul if you live in an area or state where daylight saving is not applied but you receive channels from other areas where daylight saving signals are broadcasted Select Daylight Saving with the cursor right Select Automatic for automatic clock correction for daylight saving time based on specially broadcasted signals Select Off to disable automatic clock correction based on the specially broadcasted signals Tilt Adjust This function allows you if necessary and to compensate for the Geomagnetic field to rotate the picture shown on the screen clockwise or counterclockwise Select Tilt Adjust with the cursor down Tap the cursor left or right to adjust the rotation of the picture Reset AV Settings This function allows you to reset most of the picture and sound settings to their predefined factory states Select Reset AV Settings with the cursor down Tap OK to erase settings and reset them to their default values Use of the menus 27 28 Source Settings TV Side Name AV1 Name AV2 Name AV3 Name AV4 Name Select AV1 AV2 AV3 AV4 Side Use of the menus Source This menu allows you to select and or name the accessory device you connect to one of the AV inputs Select Source with the cursor right The Source menu items appear Tap the cursor down to select the menu items When you select Select a list appears showing the available sources Selecting a source causes the TV to begin show
66. vated Closed Caption is disabled Caption Service Select Caption Service with the cursor down Tap the cursor right Select the desired Caption Service e CC 1 2 3 or 4 Dialogue and descriptions for the action on the captioned TV program shows on screen Usually CC 1 is the most used CC 2 may be used for alternate languages if they are being transmitted T1 2 30r4 Often used for channel guide schedules bulletin board information for Closed Caption programs news weather informations or stock market reports Not all Caption Services are necessarily being used by a TV channel during the transmission of a Closed Caption program Note This television receiver provides display of television closed captioning conforming with the EIA 608 standard and in accordance with Sections 15 119 of the FCC rules Use of the menus 25 26 Use of the menus Sleep Timer With the Sleep Timer function you can set a time period after which the TV will turn itself off Select Sleep Timer with the cursor down Tap the cursor right to set the time The counter runs from 0 up to 180 mins in 5 min increments When set to 0 the sleep timer is turned off One minute before the sleep timer expires a message appears that the TV will turn off in 60 seconds or you may cancel the sleep timer by tapping the OK button You can always turn off your TV earlier or change the set time On Timer Note The On Timer function is only available if ti

Download Pdf Manuals

Related Search

Related Contents

Instruction Manual - Albatros Golf Solutions  Lithonia Lighting 6BPMW LED M4/ Installation Guide  708 User Manual_20120724.ai  Help Desk Authority 9.0 - User Manual  Lenovo Laptop S200 User's Manual  Personal Protective Equipment Policy  Récepteur de commande Radio 0-10V 09550-2  Raggedstone3 User Manual Issue – 1.0  Luggage Tracker user manual_1220.ai  

Copyright © All rights reserved. Failed to retrieve file