Pelco PMC14H Computer Monitor User Manual
Contents
1. Minimum cable requirements 75 ohms impedance All copper center conductor All copper braided shield wi CAMERA AUDIO CAMERA S VIDEO Vi V2 S VIDEO c 868 8 th 9596 braid coverage Figure 1 Looping Operation One Monitor with External Video Equipment C2906M 7 03 C2906M 7 03 V2 S VIDEO EL S VHS OUT AUDIO OUT S VIDEO Figure 2 S VHS Video Input Connections Note The S Video connector is an input connector there is no loop through capability using S Video AUDIO V1 V2 S VIDEO E T OL O CAMERA A S VIDEO AUDIO p kun vi V2 S VIDEO OOW O O S VIDEO AUDIO _ S VIDEO Figure 3 Looping Operation Maximum of Three Monitors with External Video Equipment OPERATION 1 Press the POWER button to turn the monitor on The LED above the power button will illuminate when the monitor is on Select the camera by pressing the V1 V2 or S VIDEO button refer to Figure 4 If required adjust the picture using the control knobs on the front panel Refer to Figure 4 for front panel controls FRONT PANEL ADJUSTMENTS TINT Color phase adjustment Turn clockwise to increase the greenish tones in the picture Turn counterclockwise to increase the reddish tones in the picture COLOR Color saturation level Turn the control knob clockwise to in2. continuous motion applications that is preset scan tour and auto scan modes WARRANTY AND RETURN INFORMATION Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment All goods requiring warranty repair shall be sent freight prepaid to Pelco Clovis California Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products Pelco s liability for any claim whether based on If a warranty repair is required the Dealer must contact Pelco at 800 289 9100 or 559 292 1981 to obtain a Repair Authorization number RA and provide the following information 1 Model and serial number 2 Date of shipment 0 number Sales Order number or Pelco invoice number 3 Details of the defect or problem If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above please include a written explanation with the product when returned Method of return shipment shall be the same or equal to the method by which the item was received by Pelco RETURNS In order to expedite parts returned to the factory for repair or credit please call the factory at 800 289 9100 or 559 292 1981 to obtain an authorization number CA number if returned for credi
3. INSTALLATION OPERATION PMC14H and PMC14H GY 14 Inch Color Monitor 2906 7 03 IMPORTANT SAFEGUARDS AND WARNINGS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this monitor near water Do not block any ventilation openings Install in accordance with the manufacturer s instructions 1 EL gE spe Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers hat produce heat 8 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider han the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult your electrician for replacement of the obsolete outlet 9 Protect the power cord from being walked on or pinched particularly at the plug convenience receptacle and the point where it exits from the apparatus 10 Unplug the monitor during lightning storms or when unused for long periods of time 11 Refer all servicing to qualified service personnel Servicing is required when the monitor has been damaged in any way such as when the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the monitor the monitor has been exposed to rain or moisture the monitor
4. cal and electronic equipment WEEE Contact your local dealer for procedures for recycling this equipment World Headquarters 3500 Pelco Way Clovis California 933612 USA USA amp Canada Tel 800 289 9100 Fax 800 289 9150 International Tel 1 559 292 1981 Fax 1 559 348 1120 www pelco com 1509001 Orangeburg New York Las Vegas Nevada Eindhoven The Netherlands Wokingham United Kingdom Montreal Canada
5. crease the saturation level and counterclockwise to decrease the saturation level CONT Contrast adjustment Proper adjustment will allow maximum gradations between the darkest and lightest picture contrast Turn the control clockwise to increase picture contrast and counterclockwise to decrease contrast BRIGHT Brightness display adjustment Turn the control clockwise to increase brightness and counterclockwise to decrease brightness SHARP Sharpness adjustment Adjust control knob to obtain the clearest picture VOLUME Audio adjustment Turn the control clockwise to increase volume and counterclockwise to decrease volume PMC14H 0009000 5 COLOR BRIGHT CONT VOLUME POWER Figure 4 Front Panel of Monitor C2906M 7 03 SPECIFICATIONS ELECTRICAL Input Voltage Power Consumption Horizontal Resolution Visual Picture Size Sweep Linearity Speaker Output GENERAL Input Output Video Audio S Video Construction Finish PMC14H PMC14H GY Dimensions Weight ENVIRONMENTAL Operating Temperature Humidity 100 240 VAC 50 60 Hz automatic switching 45 watts 450 TV lines center of screen 14 inch 35 56 cm diagonal 10 1 0 watt 3 dBV 2 BNC inputs 75 ohms or Hi Z 2 looping outputs 3 RCA inputs Hi Z 3 looping outputs 1 DIN input Steel cabinet Black Gray 13 76 W x 12 89 H x 14 59 D inches 34 8 x 32 7 x 37 0 cm 30 6 Ib 14 kg 32 t
6. does not operate normally or the monitor has been dropped 12 The monitor shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the monitor 13 Warning To reduce the risk of fire or electric shock do not expose this monitor to rain or moisture 14 ACCC approved power cord must be used to power this equipment when used in China REGULATORY NOTICES This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Changes and modifications not expressly approved by the manufacturer or regis
7. o 106 F 0 to 41 C 10 to 85 non condensing Design and product specifications subject to change without notice REVISION HISTORY Manual Date Comments C2906M 7 03 Original version Pelco and the Pelco logo are registered trademarks of Pelco C2906M 7 03 Copyright 2003 Pelco All rights reserved 7 WARRANTY Pelco will repair or replace without charge any merchandise proved defective in material or workmanship for a period of one year after the date of shipment Exceptions to this warranty are as noted below e Five years on Pelco manufactured cameras CC3500 CC3600 CC3700 and MC3500 MC3600 Series two years on all other cameras hree years on Genex Series multiplexers server and keyboard and 090 Series Camclosure Camera System wo years on 100 150 200 and 300 Series Camclosure Camera Systems wo years on all standard motorized or fixed focal length lenses wo years on Legacy CM6700 CM6800 CM8500 CM9500 CM9740 CM9760 Matrix DFS and DF8 Series Fixed Dome products wo years on Spectra Esprit and PS20 Scanners including when used in continuous motion applications wo years on Esprit WW5700 series window wiper excluding wiper blades Eighteen months on DX Series digital video recorders One year except video heads on video cassette recorders VCRs Video heads will be covered for a period of six months Six months on all pan and tilts scanners or preset lenses used in
8. t and RA number if returned for repair merchandise returned for credit may be subject to a 20 restocking and refurbishing charge Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid Ship to the appropriate address below If you are located within the continental U S Alaska Hawaii or Puerto Rico Service Department Pelco 3500 Pelco Way Clovis CA 93612 5699 breach of contract negligence infringement of any rights of any party or product liability relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products In no event will Pelco be liable for any special incidental or consequential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Pelco or otherwise If you are located outside the continental U S Alaska Hawaii or Puerto Rico Intermediate Consignee Ultimate Consignee American Overseas Air Freight Pelco 320 Beach Road 3500 Pelco Way The above warranty provides the Dealer with specific legal rights The Dealer may also have Burlingame CA 94010 Clovis CA 93612 5699 additional rights which are subject to variation from state to state USA USA This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002 96 EC of the European Union regarding the disposal of waste electri
9. trant of this equipment can void your authority to operate this equipment under Federal Communications Commission s rules This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe est conforme norme NMB 003 du Canada 2 C2906M 7 03 DESCRIPTION C2906M 7 03 The PMC14H is a high resolution color monitor that can be used in desktop applications or rack mounted using the optional RMA14F rack mount kit The monitor supports NTSC and PAL video as well as 120 VAC and 230 VAC input power An automatic switching system makes all the necessary changes for adapting to the required formats Manual selection is not required A separate power cord is supplied for each voltage input The back panel of the PMC14H has two BNC video inputs with looping outputs one S Video input and multiple audio inputs and outputs All image adjustment controls are conveniently located on the front panel of the monitor INSTALLATION 1 Make all equipment connections as required for your Table A Video Coaxial Cable Requirements installation Refer to Figures 1 through 3 for samples of installation methods Cable Type Maximum Distance Refer to Table A for coaxial cable requirements RG59 U 750 ft 229 RG6 U 1 000 ft 305 m Plug power cord into the AC INLET connection on the RG11 U 1 500 ft 457 m rear panel of the monitor Plug the other end into a power receptacle
Download Pdf Manuals
Related Search