Home

Panasonic RQT9708-1P Stereo System User Manual

1. CJ 1 CD IPOD and FM can be set as the music source e This unit can be used as normal after the timer is set however e Turn the unit to standby mode before the timer start time e Even if the audio source or the volume is changed the timer will still use the audio source and volume that was set when the timer was turned on e To turn the timer off select OFF in step 3 e The unit will turn on at the preset time with the volume increasing gradually to the preset level Sleep timer The sleep timer can turn the unit off after a set time 1 Press SETUP repeatedly to select SLEEP and then press OK 2 Press A V to set the time in minutes and then press OK SLEEP 30 lt gt SLEEP 60 lt SLEEP 90 lt gt SLEEP 120 OFF Cancel e The remaining time is indicated on the unit s display except when other operations are performed e The play timer and sleep timer can be used together The sleep timer always has priority RQT9708 Others Automatic standby As a factory preset this unit will always turn off automatically if there is no sound output and no operation for 30 minutes To cancel this function 1 Press SETUP repeatedly to select AUTO OFF and then press OK 2 Press A V to select OFF and then press OK CJ e To turn automatic standby on select ON in step 2 e This setting cannot be selected when FM is the source
2. 2 The name that is displayed for this unit can be changed from the Edit STEREO SYSTEM name settings in Method 2 gt 9 RQT9708 Random shuffle play E Eta Select the playback mode e This mode can be combined with the repeat play feature mM When CD is selected 1 Press PLAY MENU repeatedly to select RANDOM and then press OK Press A V to select ON and press OK e RND is displayed Press P E to start play When AIRPLAY is selected Press PLAY MENU repeatedly to select SHUFFLE and then press OK Press A V to turn shuffle on and press OK e LIGET Refer to the connected device to verify the selected setting 2 NO0O N N ER e 9 During random play you cannot skip to the previous track e ep The current play mode is cleared when you open the sliding door for discs e Gy RND will not be displayed when 1 TRACK gt below is selected Repeat play Gil ENGE 1 Press PLAY MENU repeatedly to select REPEAT and then press OK 2 Press A V to select the following mode and press OK e LUET Refer to the connected device to verify the selected setting OFF Select to cancel repeat playback 1 TRACK EE gt is displayed The selected track is repeated Skip to the desired track gt 11 ALL E e is displayed All tracks are repeated ER e A
3. The brightness of this unit s display can be changed 1 Press SETUP repeatedly to select DIMMER and then press OK 2 Press A V to select ON and then press OK CJ To cancel the dimmer select OFF in step 2 Changing the main unit and remote control code When other Panasonic equipment responds to the supplied remote control change the remote control code 1 Press CD to select CD 2 Press and hold CD on the main unit and A on the remote control until the main unit s display shows REMOTE 2 3 Press and hold OK and A on the remote control for at least 4 seconds CJ To change the mode back to REMOTE 1 repeat the steps above by replacing A with Y Software update Occasionally Panasonic may release updated software for this unit that may add or improve the way a feature operates These updates are available free of charge Preparation Connect this unit to the wireless network gt 9 e Make sure that the wireless network is connected to the Internet 1 Press SETUP repeatedly to select SW UPDATE and then press OK 2 Press A V to select UPDATE Y and then press OK to start the update L gt After the update has finished SUCCESS is displayed 3 Disconnect the AC power supply cord and reconnect it after 3 minutes e DO NOT DISCONNECT the AC power supply cord while one of the following messages is displayed
4. DL ERROR e The software download has failed Press any button to exit Please try again later e The server cannot be found Press any button to exit Make sure that the wireless network is connected to the Internet ERROR e Incorrect operation is performed Read the instructions and try again F61 e There is a power supply problem Consult the dealer NO PLAY e ACD that is not in CD DA format is inserted It cannot be played NOT SUPPORTED e You have inserted an iPod iPhone that cannot be played 4 Insert correctly and try again if iPod iPhone is compatible e If the iPod iPhone is compatible turn it on before inserting it to this unit READING e The unit is checking the CD information After this display has disappeared start operating START ERROR e Check the iPhone iPod touch Visit the below website for more information http radio vtuner com panasonic en REMOTE L 1 stands for a number e The remote control and this unit are using different codes Change the code on the remote control When REMOTE 1 is displayed press and hold OK and V for more than 4 seconds When REMOTE 2 is displayed press and hold OK and A for more than 4 seconds RQT9708 Specifications E GENERAL Power consumption 25 W Power consumption in standby mode Approx 0 1 W Power consumption in stand
5. LINKING UPDATING or O stands for a number MM e If you do not want to update the unit select UPDATE N and then press OK in step 2 If there are no updates NO NEED is displayed after step 2 During the update process no other operations can be performed Downloading will require several minutes lt may take longer or may not work properly depending on the connection environment E Checking the software version Press SETUP repeatedly to select SW VER and then press OK L The version of the installed software is displayed 2 Press OK to exit Wi Fi signal strength To check the Wi Fi signal strength where the unit is located Preparation Connect this unit to the wireless network gt 9 1 Press SETUP repeatedly to select SIG LEVEL and then press OK e The unit s display shows LEVEL D O0 stands for a number 2 Press OK to exit this display mode Lo e Itis recommended to have a signal strength of 3 Change the position or angle of your wireless network router or the unit if the indication is 2 or 1 and see if the connection improves e If LEVEL 0 is displayed this unit cannot establish a link with the wireless network router gt 17 e This function does not work when AirPlay is used Network standby This unit can turn on automatically f
6. Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So what sounds normal can actually be loud and harmful to your hearing Guard against this by setting your equipment at a safe level BEFORE your hearing adapts To establish a safe level e Start your volume control at a low setting e Slowly increase the sound until you can hear it comfortably and clearly and without distortion Once you have established a comfortable sound level e Leave it there Taking a minute to do this now will help to prevent hearing damage or loss in the future After all we want you listening for a lifetime As an ENERGY STAR Partner Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency For Canada only The word Participant is used in place of the word Partner Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 http www panasonic com Panasonic Corporation 2012 Printed in Malaysia Panasonic Canada Inc En Gp 5770 Ambler Drive Mississauga Ontario L4W 2T3 www panasonic ca RQT9708 1P F0212KW1032
7. gt 16 To return all settings to the factory preset e The operation history may be recorded in the memory of this unit EQ WAFIPROTECTED CERTIFIED Way The Wi Fi CERTIFIED Logo is a certification mark of the Wi Fi Alliance The Wi Fi Protected Setup Mark is a mark of the Wi Fi Alliance Wi Fi Wi Fi Protected Setup WPA and WPA2 are marks or registered marks of the Wi Fi Alliance RQT9708 Spanish Quick Reference Referencia r pida en espa ol Conexiones Cinta adhesiva no suministrado q Antena interior FM suministrado YA Conecte el cable de alimentaci n AC despu s de que todas las dem s conexiones est n completas Hacia el tomacorriente AC Cable de alimentaci n AC suministrado e Consumo de energ a en Standby modo de espera Aprox 0 1 W Insertar o sacar los medios Presione Compatible con iPod iPod amp iPhone no suministrado Adaptador del puerto no suministrado Las operaciones de reproduccion de CD iPod iPhone Preparacion eEncienda la unidad e Inserte el medio gt arriba ePresione CD o iPod para seleccionar la fuente de audio Reproducci n b sica Reproducir Presione 1 Detenci n Presione W Pausa Presione 1 Presione nuevamente para reiniciar la reproducci n Saltear Presione 4 4 4 4 0 gt gt gt P gt 1 para saltear una pista B squeda Durante l
8. e Sliding door is not in correct position Turn the unit off and on again If this display appears again consult the dealer IPOD OVER CURRENT ERROR e The iPod iPhone is drawing too much power Remove the iPod iPhone and turn the unit off and on again LEVEL 0 e There is no link between this unit and the wireless network router Try the following operations Check that the wireless network router is turned on Turn this unit off and on again Reset the wireless network settings gt 9 If the problem persists consult your dealer x 2 l o zZ i NOCONNECT e This unit cannot connect to the network Check the network connection gt 9 NODEVICE e The iPod iPhone device is not inserted correctly Read the instructions and try again gt 8 NO DISC e Insert the disc to be played gt 8 CANNOT DISPLAY e The Wi Fi signal strength cannot be displayed if AIRPLAY is the selected source Stop the AirPlay playback select a different source e g CD and try again gt 15 CANNOT SET e Select an audio source other than AIRPLAY or VTUNER CHECKING CONNECTION e The unit is checking the connected iPod iPhone If this display keeps appearing make sure that iPod iPhone is inserted correctly and try again gt 8 DIMMER e Appears 10 seconds after the volume is turned to 0
9. memory or recorded content This list of items is not exhaustive but for illustration only In certain instances some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or the exclusion of implied warranties so the above limitations and exclusions may not be applicable This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory CONTACT INFORMATION For product information and operation assistance please contact Our Customer Care Centre Telephone 1 800 561 5505 Fax 905 238 2360 Email link Support contact us gt email on www panasonic ca For defective product exchange within the warranty period please contact the original dealer or our Customer Care Centre RQT9708 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN lt AND INTERLOCKS DEFEATED gt DO NOT STARE INTO BEAM FDA 21 CFR Class 11 Ia CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS 1EC60825 1 A2 Class 1M RAYONNEMENT LASER VISIBLE ET INVISIBLE CLASSE 1M EN CAS D OUVERTURE ET LORSQUE LA SECURITE EST NEUTRALISE NE PAS REGARDER DIRECTEMENT A LAIDE D INSTRUMENTS D OPTIQUE KLASS 1M SYNLIG OCH OSYNLIG LASERSTRALNING NAR DENNA DEL AR PPNAD OCH SP RREN AR URKOPPLAD BETRAKTA EJ STR LEN DIREKT GENOM OPTISKT INSTRUMENT SYNLIG OG USYNLIG LASERSTRALING KLASSE 1M NAR LA
10. such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does nat fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from As tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped NOoORWND WARNING Unit e To reduce the risk of fire electric shock or pr
11. E and then press OK 3 Press A Y to select MANUAL and then press OK 4 Press 44 44 or gt gt gt gt to tune to the required station e To start automatic tuning press and hold 4 4 lt 4 gt gt gt gt gt gt until the frequency starts scrolling Tuning stops when a station is found Na To preset the channel 5 While listening to the radio broadcast Press OK 6 Press A W to select the channel and then press OK E To improve FM sound quality While receiving FM broadcasts press PLAY MENU repeatedly to select FM MODE and then press OK 2 Press A W to select MONO and then press OK e This setting can be preset and memorized To do so continue to step 5 of Manual tuning and presetting C e Select STEREO in step 2 to return to stereo broadcasts e MONO is canceled if the frequency is changed e If MONO is selected regardless of the type of signal this unit is receiving FM MONO is displayed when DISPLAY is pressed gt below E To display the current signal status Press DISPLAY FM ST The FM signal is in stereo FM The FM signal is in monaural e FM is also displayed even if this unit is not tuned to a station Lo e STEREO is displayed when this unit tunes to a stereo broadcast Internet Radio This unit can output Internet radio if vTuner for Panasoni
12. GET ER ABENT OG SIKKERHEDS AFBRYDERE ER UDE AF FUNKTION UNDGA AT SE LIGE PA MED OPTISKE INSTRUMENTER AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA LUOKAN 1M NAKYVAA JA NAKYMATONTA LASERSATEILYA ALA KATSO OPTISELLA LAITTEELLA SUORAAN SATEESEEN SICHTBARE LASERSTRAHLUNG KLASSE 1M WENN ABDECKUNG GEOFFNET UND SICHERHEITSVERRIEGELUNGEN UBERBRUCKT NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN OQUEO DESHABILITADOS NO MIRE DIRECTAMENTE CON 8 BATA RANA RS ERIE ROLXS1034 Inside of product If you see this symbol Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal Listening Caution Selecting fine audio equipment such as the unit you ve just purchased is only the start of your musical enjoyment Now it s time to consider how you can maximize the fun and excitement your equipment offers This manufacturer and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing We recommend that you avoid prolonged exposure to excessive noise
13. Limited Warranty Limited Warranty Coverage For USA and Puerto Rico Only If your product does not work properly because of a defect in materials or workmanship Panasonic Consumer Marketing Company of North America referred to as the warrantor will for the length of the period indicated on the chart below which starts with the date of original purchase warranty period at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by the warrantor Product or Part Name Parts Labor Audio Products 1 year 1 year except items below DVD Home Theater System 1 year 1 year Home Theater Audio System 1 year 1 year SD Memory Cards Rechargeable Battery 90 days Not Packs defective exchange Applicable During the Labor warranty period there will be no charge for labor During the Parts warranty period there will be no charge for parts This Limited Warranty excludes both parts and labor for non rechargeable batteries antennas and cosmetic parts cabinet This warranty only applies to products purchased and serviced in the United States or Puerto Rico This warranty is extended only to the original purchaser of a new product which was not sold as is Carry In or Mail In Service To find a service center plea
14. Networks Choose a Network Y Setup 0 Start Safari on your iPhone and type http 192 168 1 12 into the URL address field and display the page htp 192 168 1 12 om L gt This units setup window is displayed Select Search wireless network Connect to wireless network English fiancais s G Manual settings gt Select and input the details Search wireless network Network name SSID Select Pn oH Password AB a Select your home wireless network name Bl Type the password EJ Select NEXT Perform the Additional settings gt right If they do not apply continue to the next step 7 Select JOIN to apply the settings L gt In the pop up screen select OK to continue Select CANCEL to return to the setup window L The wireless status indicator lights blue You can now close the Safari browser L When the configuration is finished SUCCESS is indicated on this unit s display If FAIL is displayed press OK Then check the wireless network password and other settings and start again from step 1 8 Press OK on the remote control to complete the settings 9 Connect your iPhone back to your home wireless network Alternative settings Instead of steps 4 and 5 Select Manual settings 1 Type your home wireless network name into the Ne
15. Panasonic Owner s Manual Compact Stereo System Model No SC HC57 ENGLISH _ O lt a N W Thank you for purchasing this product For optimum performance and safety please read these instructions carefully Please keep this manual for future reference If you have any questions contact U S A and Puerto Rico 1 800 211 PANA 7262 Canada 1 800 561 5505 Included Installation Instructions gt 2 6 The installation should never be done by any other than a qualified installation specialist Before commencing work carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly Please keep these instructions You may need them when maintaining or moving this unit La referencia r pida en espa ol se puede encontrar en la p gina 20 21 P PC RQT9708 1P IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow the safety instructions on the unit and the applicable safety instructions listed below Keep these operating instructions handy for future reference 1 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources
16. Play icon is displayed restart the wireless network router turn the Wi Fi connection on the iOS device or Mac PC off and on and then make sure that your home wireless network is selected e If the AirPlay icon is not displayed even if Wi Fi status indicator lights blue try restarting the wireless network router e With some OS and Tunes versions it may not be possible to restart the AirPlay playback if the selector is changed e g CD or the unit is turned off during the AirPlay playback In this case select a different device from the AirPlay icon of the Music App or Tunes and then re select this unit as the output speakers gt 11 A Remote control The remote control doesn t work properly e The remote control and this unit are using a different code right REMOTE D Messages The following messages or service numbers may appear on the unit s display e You plugged the AC power supply cord in for the first time or there was a power failure recently Set the time gt 13 ADJUST CLOCK e Clock is not set Adjust the clock accordingly ADJUST TIMER e Play timer is not set Adjust the play timer accordingly AUTO OFF e The unit has been left unused for about 30 minutes and will shut down in a minute Press any button to cancel it FAIL e Updating or setting has failed Read the instructions and try again ILLEGAL OPEN
17. Repeat play is canceled when you open the sliding door for discs 1 LIE Perform the settings during playback 2 LIE The applied settings will remain until it is changed on the connected device RQT9708 Listening to the radio You can preset up to 30 channels Preparation Make sure that the FM antenna is connected gt 8 LA A station previously stored is overwritten when another station is stored in the same channel preset Presetting stations automatically 1 Press RADIO to select FM 2 Press PLAY MENU repeatedly to select A PRESET and then press OK Press A V to select LOWEST or CURRENT and then press OK LOWEST To begin auto preset with the lowest frequency FM 87 9 or FM 87 5 CURRENT To begin auto preset with the current frequency To change the frequency refer to Manual tuning and presetting The tuner starts to preset all the stations it can receive into the channels in ascending order Listening to a preset channel Preparation 1 Press RADIO to select FM 2 Press PLAY MENU repeatedly to select TUNEMODE and then press OK Press A V to select PRESET and then press OK Press RADIO to select FM Press l44 lt 4 lt 4 or gt gt PP to select the channel Manual tuning and presetting Select a radio broadcast 1 Press RADIO to select FM 2 Press PLAY MENU repeatedly to select TUNEMOD
18. SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons Accessories Check the supplied accessories before using this unit 1 Remote control 1 FM indoor with a battery antenna N2QAYC000056 RSAX0002 1 AC power supply cord K2CB2YY00059 Wall mounting accessories 1 Safety holder 2 Wall mount RGQ0660 K brackets YA RMQX1082 K CxS J 1 Screw XTB3 8JFJK ONLY FOR CANADA The enclosed Canadian French label sheet corresponds to the English display on the top of the unit El e Do not use AC power supply cord with other equipment e Product numbers provided in this Owner s Manual are correct as of December 2011 These may be subject to change x l o z w THE FOLLOWING APPLIES IN THE U S A AND CANADA This device complies with Part 15 of FCC Rules and RSS Gen of IC Rules Operation is subj
19. SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED LIMITATIONS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by Panasonic Canada Inc or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage modification introduction of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than an Authorized Servicer or damage that is attributable to acts of God Dry cell batteries are also excluded from coverage under this warranty THIS EXPRESS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL PANASONIC CANADA INC BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY As examples this warranty excludes damages for lost time travel to and from the Authorized Servicer loss of or damage to media or images data or other
20. a reproducci n Mantenga presionado td 44 o gt gt gt gt Volumen Presione VOL o VOL para ajustar el volumen Mute Presione MUTE para silenciar el sonido RQT9708 E Y Para navegar por el men de iPod iPhone e Abra Music App para usar esta funci n con los modelos iPod touch iPhone A V Para navegar entre los elementos del men OK Para ir al men siguiente iPod MENU Para volver al men anterior CJ El funcionamiento puede variar entre los modelos de iPod iPhone Radio Puede predeterminar hasta 30 canales FM Presione RADIO para seleccionar FM Preselecci n autom tica de las estaciones 1 Presione PLAY MENU reiteradas veces para seleccionar A PRESET y luego presione OK 2 Presione A Y para seleccionar LOWEST y luego presione OK Escuchar una estaci n predeterminada 1 Presione PLAY MENU reiteradas veces para seleccionar TUNEMODE y luego presione OK 2 Presione A V para seleccionar PRESET y luego presione OK Presione Hd d o gt gt gt gt para seleccionar el canal 2 gt Reloj y temporizador Ajuste del reloj ste es un reloj de 12 horas 1 Presione SETUP reiteradas veces para seleccionar CLOCK y luego presione OK 2 Presione A V para seleccionar la hora y luego presione OK Sincronizador de reproducci n Puede fijar el temporizador para qu
21. antenna if there are buildings or mountains nearby e Switch the television or other audio player off or separate it from the unit e Keep this unit away from mobile phones if the interference is apparent RQT9708 Stations cannot be selected Change the FM frequency step Press RADIO to select FM 2 Press and hold RADIO on the main unit After a few seconds the display changes to show the current lowest frequency Continue to hold the button down The lowest frequency changes and the step is changed iPod iPhone operations Cannot charge or operate e Check that the iPod iPhone is connected firmly gt 8 e The battery of the iPod iPhone is depleted Charge the iPod iPhone and then operate again e When unexpected operation occurs while using the iPod iPhone connect the iPod iPhone again or try to restart the iPod iPhone AirPlay operations Cannot connect to the network e Confirm the network connection and settings gt 9 e Your wireless network might be set to be invisible In this case select Manual settings in Method 2 gt gt 9 e This unit cannot join a wireless network using WEP security settings with the WPS methods Method 1 Use Method 2 to join the wireless network gt 9 e Make sure that the multicast function on the wireless network router is set to on enabled Cannot connect to the unit e Make sure that this unit is on the same wireless net
22. by mode When NET STNBY is ON Approx 5 6 W Power supply AC 120 V 60 Hz Dimensions WxHxD 480 mmx 197 mmx84 mm 19 x7 3 4 X3 1 2 Depth without stand 75 mm 3 Mass Weight Approx 2 6 kg 5 7 Ibs Operating temperature range 0 C to 40 C 32 F to 104 F Operating humidity range 35 to 80 RH no condensation E AMPLIFIER SECTION Output power RMS Output Power Stereo mode Front Ch both ch driven 20 W per channel 6 Q 1 kHz 10 THD Total RMS Stereo mode power 40 W FTC Output Power Stereo mode Front Ch both ch driven 15 W per channel 6 Q 20 Hz to 20 kHz 1 THD Total FTC Stereo mode power 30 W E TUNER SECTION Preset Memory Frequency Modulation FM Frequency range 87 9 MHz to 107 9 MHz 200 kHz step 87 5 MHz to 108 0 MHz 100 kHz step Antenna terminals FM 30 stations 75 Q unbalanced RQT9708 m DISC SECTION Disc played 8 cm 3 or 12 cm 5 CD CD R RW CD DA Pick up Wavelength Laser power 790 nm CD For U S A CLASS I For Canada CLASS 1 Audio output Disc Number of channels 2 ch FL FR M SPEAKER SYSTEM SECTION Type 1 way 1 speaker system Passive Radiator Speaker unit s Full range 6 5 cm 2 1 2 Cone typex 1 per channel Passive Radiator 8 cm 3 1 8 x2 per channel Impedance 60 E Wi Fi AirPlay SECTION Wi Fi WLAN Standards IEEE802 11b g Frequency range 2 4 GHz band Security WEP WPA WPA2 WPS versi
23. c is installed on your iPhone iPod touch Preparation e Install vTuner for Panasonic to your iPhone iPod touch e Install OS 5 0 or later 1 Insert the iPhone iPod touch to this unit 2 Press iPod repeatedly to select VTUNER L gt vTuner for Panasonic starts Lo e Visit the below website for the following information about vTuner for Panasonic http radio vtuner com panasonic en Compatible iPhone iPod touch models and software versions purchasing installation and operation details e A pop up screen may appear on your iPhone iPod touch Follow the indicated instructions Sound adjustment The following sound effects can be added to the audio output 1 Press SOUND repeatedly to select the effect and then press OK 2 Press A V to select the setting and then press OK L Direct Vocal LEVEL 1 LEVEL 2 or 2 Surround OFF 2 D SURROUND The factory preset is OFF wW Preset EQ HEAVY heavy SOFT PRESET EQ soft CLEAR clear VOCAL vocal or FLAT flat off e The factory preset is HEAVY Bass BASS or Adjust the level 4 to 4 Treble TREBLE Dynamic Bass ON D BASS or D BASS OFF D BASS e The factory preset is ON D BASS e You may experience a reduction in sound quality when these effects are used with some sources lf this occurs turn the sound effects
24. ck operations The following marks indicate the availability of the feature ea CD audio in CD DA format Y Compatible iPod iPhone gt 4 LME When connected to an AirPlay compatible device gt left Preparation e Turn the unit on e Insert the media gt 8 or connect the AirPlay compatible device gt 9 e Press CD or iPod to select the audio source Basic play E EI MM Play Press 11 G2 E only Stop Press W Pause Press 11 Press again to restart play e HET f play does not restart wait approx 10 sec and try again Skip Press td 4 or gt gt gt gt gt to skip track Search During playback CA E only Press and hold lt lt or gt gt gt gt e RZJ Backwards search is only within the current track Volume Press VOL or VOL to adjust the volume Mute Press MUTE to mute the sound To view the track number and remaining time Press DISPLAY repeatedly during play or pause E EZZ To navigate through the iPod iPhone menu e Open the Music App to use this feature with iPod touch iPhone models A V To navigate menu items OK To go to the next menu iPod MENU To return to the previous menu C e To view the operation open the sliding door e The operation may vary among iPod iPhone models Continues to next page 1 _ stands for a digit that is unique to each set
25. e all AND 2 Measure and mark the position of the wall mount brackets Both sides L Use figures below to identify the screwing positions Before deciding the location to place the unit be sure to check that the Wi Fi signal strength is sufficient gt 9 15 The position to attach the wall mount brackets i 12 5 mm 1 2 D E LS i 232 mm 9 1 3 iq gt Space required 300 mm 11 12 16 116 mm 4 9 16 1113 mm 4 13 32 232 mm 9 1 4 247 mm 9 23 32 480 mm 19 680 mm 30 29 32 3 Attach the wall mount bracket to the wall with 2 screws not supplied Both sides e Use a spirit level to ensure both wall mount brackets are level e Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg 72 8 lbs At least 30 mm 1 9 16 yp 27 5 mm le to AN 9 4 mm 8 Wall mount bracket 4 Fix the safety holder onto the unit with the screw supplied L gt Screw tightening torque 50 Necm 0 4 Ibfeft to 70 Necm 0 5 Ibfeft Screw supplied 5 Attach the fall prevention cord not supplied to this unit e Use a cord that is capable of supporting over 33 kg 72 8 Ibs with a diameter of about 1 5 mm 1 16 Cord not supplied 6 Hook the unit securely onto the wall mount brackets with both hands e Connect the FM antenna and t
26. e built in cabinet or in another confined space Ensure this unit is well ventilated Do not obstruct this unit s ventilation openings with newspapers tablecloths curtains and similar items Button type battery Lithium battery e Danger of explosion if battery is incorrectly replaced Replace only with the type recommended by the manufacturer e When disposing the batteries please contact your local authorities or dealer and ask for the correct method of disposal e Keep out of reach of children e Insert with poles aligned e Mishandling of batteries can cause electrolyte leakage and may cause a fire Remove batteries if you do not intend to use the remote control for a long period of time Store in a cool dark place Do not heat or expose to flame Do not leave the battery ies in a car exposed to direct sunlight for a long period of time with doors and windows closed Do not touch the terminals and with metal objects Donotrecharge disassemble remodel heat or throw into fire THE FOLLOWING APPLIES ONLY IN THE U S A FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used
27. e esta unidad se encienda a una cierta hora Preparaci n Fije el reloj gt izquierda 7 1 N N 9 Ajuste del temporizador Presione SETUP reiteradas veces para seleccionar TIMER ADJ y luego presione OK Presione A V para seleccionar la hora de inicio y luego presione OK Presione A V para seleccionar la hora de finalizaci n y luego presione OK Encienda el temporizador Seleccione la fuente de m sica y fije el volumen deseado ESPANOL Presione SETUP reiteradas veces para seleccionar TIMER SET y luego presione OK Presione A V para seleccionar SET y luego presione OK e Para apagar el temporizador seleccione OFF Presione para apagar la unidad A 4 CD IPOD y FM se pueden fijar como la fuente de m sica Apagado autom tico El apagado autom tico puede apagar la unidad despu s de una hora predefinida 1 2 Presione SETUP reiteradas veces para seleccionar SLEEP y luego presione OK Presione A V para seleccionar la hora y luego presione OK SLEEP 30 lt gt SLEEP 60 lt gt SLEEP 90 lt gt SLEEP 120 OFF Cancelar RQT9708 Limited Warranty ONLY FOR U S A AND PUERTO RICO Panasonic Consumer Marketing Company of North America Division of Panasonic Corporation of North America One Panasonic Way Secaucus New Jersey 07094 Panasonic Home Audio Products
28. ect to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device This transmitter must not be co located or operated in conjunction with any other antenna or transmitter This equipment complies with FCC IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines in Supplement C to OET65 and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated keeping the radiator at least 20 cm 7 7 8 or more away from person s body excluding extremities hands wrists feet and ankles THE FOLLOWING APPLIES ONLY IN CANADA This device complies with RSS 210 of the IC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation of the device Product Identification Marking is located on the bottom of the unit RQT9708 Table of contents IMPORTANT SAFETY INSTRUCTIONS Accessories Playable media Control reference guide Attaching the unit to a wall optio
29. essories M Supplied accessories e 1 Safety holder e 1 Screw e 2 Wall mount brackets E Commercially available accessories not supplied e 4 Wall mount bracket fixing screws e 1 Safety holder fixing screw e 1 Fall prevention cord e 1 Screw eye e Keep the safety holder out of reach of children to prevent swallowing e Keep the screws out of reach of children to prevent swallowing e Keep the wall mount brackets out of reach of children to prevent swallowing L Use screws with a nominal diameter of 4 mm s2 which are suitable to the material of the wall e g wood steel concrete etc Safety precautions Professional installation is required The installation should never be done by any other than a qualified installation specialist PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND OR SERIOUS INJURY INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING e Be sure to install this unit as indicated within this Owner s Manual Wall mount instructions Before installation turn the unit off and disconnect the AC power supply cord from the AC outlet 1 Detach the stand from the unit L gt Unscrew the fixing screw 2 pieces at the bottom of the unit L gt Gently pull the stand off the unit as illustrated e Keep the removed screws and stand in a safe place RQT9708 Bottom of main unit Fixing screw SS soft blanket or cloth i
30. gt 9 e Turn on the compatible device 1 Start iTunes on your Mac PC or the Music App on your iOS device e f the Music App on your OS device is used select the file that is to be played 2 Select this unit from the AirPlay Lad icon at the bottom right hand corner of the display L gt Check the volume settings before starting the playback When AirPlay is used for the first time the volume may be output at the maximum setting e If you have not changed the name this unit wil be displayed as Panasonic HC57 qi e g iPhone iOS 5 0 p 4 gt i a e g iTunes 10 5 Bottom right Computer Panasonic HC57 Multiple Speakers 3 Start play ma e This unit can be set to turn on automatically when this unit is selected as the output speakers gt 15 e Playback of other audio sources will stop and AirPlay output will have priority Volume changes on the OS device or Tunes will be applied to this unit Refer to the Tunes Help for the required settings in iTunes With some OS and Tunes versions it may not be possible to restart the AirPlay playback if the selector is changed e g CD or the unit is turned off during the AirPlay playback In this case select a different device from the AirPlay icon of the Music App or Tunes and then re select this unit as the output speakers AirPlay will not work when playing back videos on Tunes Playba
31. he AC power supply cord to the unit before hanging the unit onto the wall gt 8 e After hanging the unit release your hand carefully to confirm the unit sits securely on the wall E 2 l oO zZ wi 7 Drive the safety holder fixing screw not supplied to secure the safety holder onto the wall e Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg 72 8 Ibs e Refer to step 3 for requirements before screwing Safety holder ze Fixed to the wal Safety holder fixing screw not supplied 8 Attach the fall prevention cord not supplied to the wall e Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg 72 8 Ibs e Make sure that the slack of the cord is minimal Screw eye not supplied _ Cord not supplied __ Wall RQT9708 Connections 3 Adhesive tape not supplied FM indoor antenna supplied Connect the AC power supply cord after all other connections are complete This unit consumes a small amount of AC power gt 18 even when turned off e These speakers do not have magnetic shielding Do not e Tape the antenna to a wall or column in a position with the place them near a television personal computer or other least amount of interference Use an FM outdoor antenna if devices easily influenced by magnetism radio reception is poor Inserting or remov
32. he wireless network router s operating instructions for details on how to enter the PIN code 1 While CONNECT is flashing press and hold WPS again to display the 8 digit PIN code Wi Fi status indicator blinks purple 2 Enter the PIN code into the wireless router e To edit this system s name it is necessary to use Method 2 e FAIL may be displayed if the connection was not made within the set time limit Try the setting again If FAIL is still displayed try Method 2 Method 2 If your wireless network router does not support WPS With this method you will access this unit s wireless network settings from the Internet browser of your compatible device e The illustrations and explanations are based on an iPhone However the word iPhone can be replaced with your compatible device Preparation e Check your home wireless network name Network name SSID and password for this network This can often be found on the wireless router itself e Turn on your iPhone Continues to next page 1 WPS stands for Wi Fi Protected Setup RQT9708 RQT9708 Press SETUP on the remote control repeatedly to select NET SETUP and then press OK L SETTING is indicated on the display Wi Fi status indicator blinks purple Connect your iPhone to this unit s wireless network called Setup e Once Setup _____ connected with this unit Esc WIFI
33. his unit close to the wireless router e Simultaneous use with other 2 4 GHz devices such as microwaves cordless telephones etc may result in connection interruptions e Immediately after this unit is turned on the network setup may take longer to start e This unit cannot join a wireless network using WEP security settings with Method 1 Use Method 2 to join the wireless network e To cancel this setting in the middle press to turn off the unit e For up to date compatibility information on your Wireless router refer to http panasonic jp support global cs This site is in English only Method 1 If your wireless network router supports WPS E Using the WPS Push Button Configuration PBC WPS Push Button Configuration Ss PBC compatible wireless router may have this mark x Y l o zZ i L CONNECT flashes on the display Wi Fi status indicator blinks blue e Complete step 2 within 2 mins 2 Press the WPS button on the wireless router L When a link is established LINKING is indicated on this unit s display L When the configuration is finished SUCCESS is indicated on this unit s display Wi Fi status indicator lights blue 3 Press OK on the remote control to complete the setting A e This unit can also be set using the WPS PIN code Replace step 2 of Method 1 with the following steps Before starting refer to t
34. ification introduction The model number and serial number of this product can be found on either the back or the bottom of the unit Please note them in the space provided below and keep for future reference MODEL NUMBER SERIAL NUMBER SC HC57 of sand humidity or liquids commercial use such as hotel office restaurant or other business or rental use of the product or service by anyone other than a Factory Service Center or other Authorized Servicer or damage that is attributable to acts of God THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY As examples this excludes damages for lost time travel to and from the servicer loss of or damage to media or images data or other memory or recorded content The items listed are not exclusive but for illustration only ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts so the exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If a problem with this product deve
35. in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Any unauthorized changes or modifications to this equipment would void the user s authority to operate this device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible Party Panasonic Corporation of North America One Panasonic Way Secaucus NJ 07094 Support Contact Panasonic Consumer Marketing Company of North America Telephone No 1 800 211 PANA 7262 CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
36. ing media Compatible iPod iPhone not supplied Dock adaptor not supplied 1 Make sure to tilt the disc so as not to touch the sliding door e When moving this unit be sure to remove all media and turn 2 Do not push or pull the dock manually this unit to standby mode 3 When inserting or removing the iPod iPhone tilt the dock slightly by holding the corner of the dock e Make sure that the unit does not fall when inserting or removing media e Be sure to remove the iPod iPhone from its case RQT9708 AirPlay With this feature you can wirelessly stream music to this unit s speakers E Compatible devices as of December 2011 AirPlay works with e iOS 4 2 or later iPod touch 2nd 3rd and 4th generation iPhone 4S iPhone 4 iPhone 3GS iPad 2 iPad e Tunes 10 2 or later Mac PC Network settings a To use the AirPlay function this unit must join the same wireless network as the compatible device ne Preparation With this unit there are 2 methods to setup the wireless connection Determine which type of wireless network router you are using and follow the method that matches your device e Refer to the operating instructions of the wireless network router for details If you do not know which type of wireless network router you are using use Method 2 e Turn the unit on Lo e When performing the network settings place t
37. lops during or after the warranty period you may contact your dealer or Service Center If the problem is not handled to your satisfaction then write to the warrantor s Consumer Affairs Department at the addresses listed for the warrantor PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY Customer Services Directory United States and Puerto Rico Obtain Product Information and Operating Assistance locate your nearest Dealer or Service Center purchase Parts and Accessories or make Customer Service and Literature requests by visiting our Web Site at http www panasonic com help or contact us via the web at http www panasonic com contactinfo You may also contact us directly at 1 800 211 PANA 7262 Monday Friday 9am 9pm Saturday Sunday 10am 7pm EST For hearing or speech impaired TTY users TTY 1 877 833 8855 Accessory Purchases United States and Puerto Rico Purchase Parts Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at http www pstc panasonic com Or send your request by E mail to npcparts us panasonic com You may also contact us directly at 1 800 332 5368 Phone 1 800 237 9080 Fax Only Monday Friday 9am 9pm EST Panasonic National Parts Center 20421 84th Ave S Kent WA 98032 We accept Visa MasterCard Discover Card American Express For hearing or speech impaired TTY u
38. n that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Please note that the use of this accessory with iPod or iPhone may affect wireless performance AirPlay the AirPlay logo iPhone iPod iPod classic iPod nano and Pod touch are trademarks of Apple Inc registered in the U S and other countries iPad is a trademark of Apple Inc x l o Z w ME Clean discs DO CX Wipe with a damp cloth and then wipe dry E Disc handling precautions e Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc e Do not attach labels or stickers to discs e Do not use record cleaning sprays benzine thinner static electricity prevention liquids or any other solvent e Do not use the following discs Discs with exposed adhesive from removed stickers or labels rented discs etc Discs that are badly warped or cracked Irregularly shaped discs such as heart shapes E To dispose or transfer this unit The unit may keep the user settings information in the unit If you discard this unit either by disposal or transfer then follow the procedure to return all the settings to the factory presets to delete the user settings
39. nal Connections Inserting or removing media AirPlay Playback operations Listening to the radio Internet Radio Sound adjustment Clock and Timer Troubleshooting Specifications Unit and media care Licenses Spanish Quick Reference Referencia r pida en espa ol COMEXIONES EE 20 Limited Warranty ONLY FOR U S A AND PUERTO RlCO ecccocniccocnicccocinnciocnnaconccanananananas 22 Limited Warranty ONLY FOR CANADA 23 Operations in these instructions are described using the remote control but you can do the operations with the main unit if the operations are the same RQT9708 Playable media Compatible iPod iPhone for docking iPod touch 1st 2nd 3rd and 4th generation iPod nano 2nd 3rd 4th 5th and 6th generation iPod classic iPhone 4S iPhone 4 iPhone 3GS iPhone 3G iPhone as of December 2011 a e Compatibility depends on the software version Update your iPod iPhone to the latest software before using it with this unit e Depending on the model it may be necessary to remove the iPod iPhone and select the album artist etc on the iPod iPhone e Be sure to use a dock adapter that is compatible with your iPod iPhone To purchase a dock adapter consult your iPod iPhone dealer If a dock adapter is not available insert and remove the iPod iPhone with care Please be aware that Panasonic acce
40. nty ONLY FOR CANADA on page 23 if you reside in Canada To return all settings to the factory preset When the following situations occur reset the memory e There is no response when buttons are pressed e You want to clear and reset the memory contents Disconnect the AC power supply cord Wait for at least 3 minutes before proceeding to step While pressing and holding down I on the main unit reconnect the AC power supply cord Oo appears on the display Release 0 l EJ All the settings are returned to the factory preset You will need to reset the memory items Do you have the latest software installed e Occasionally Panasonic may release updated software for this unit that may add or improve the way a feature operates gt 15 A Common problems Humming heard during play e An AC power supply cord or fluorescent light is near the cords Keep other appliances and cords away from this unit s cables Disc operations Incorrect display or play will not start e Make sure that the disc is compatible with this unit gt 4 e There is moisture on the lens Wait for about an hour and then try again A beat sound or noise is heard while receiving radio broadcast e Confirm the FM antenna is properly connected gt 8 e Adjust the position of the antenna e Try to keep a certain amount of distance between the antenna and AC power supply cord e Try to use outdoor
41. oduct damage Do not expose this unit to rain moisture dripping or splashing Do not place objects filled with liquids such as vases on this unit Use only the recommended accessories Do not remove covers Do not repair this unit by yourself Refer servicing to qualified service personnel Power cord e Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs Button type battery Lithium battery e Risk of fire explosion and burns Do not disassemble heat 2 above 60 C 140 F or incinerate RQT9708 If any electrolyte should come into contact with your hands or clothes wash it off thoroughly with water If any electrolyte should come into contact with your eyes never rub the eyes Rinse eyes thoroughly with water and then consult a doctor lt For USA California only gt This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate A CAUTION Unit e This unit utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure e Do not place sources of naked flames such as lighted candles on this unit Placement e To reduce the risk of fire electric shock or product damage Do not install or place this unit in a bookcas
42. off Clock and Timer Setting the clock This is a 12 hour clock 1 Press SETUP repeatedly to select CLOCK and then press OK 2 Press A V to set the time and then press OK EJ e To display the clock press SETUP repeatedly to select CLOCK and then press OK once The time is displayed for 10 seconds During standby press iPod MENU DISPLAY once e The clock is reset when there is a power failure or when the AC power supply cord is removed e Reset the clock regularly to maintain accuracy RQT9708 You can set the timer so this unit turns on at a certain time every day Preparation Set the clock gt 13 E Setting the timer 1 Press SETUP repeatedly to select TIMER ADJ and then press OK Press A V to set the starting time ON TIME and then press OK Press A V to set the finishing time OFF TIME and then press OK 2 3 Lo e To display the timer settings press SETUP repeatedly to select TIMER ADJ and then press OK once During standby press iPod MENU DISPLAY twice e The music source and volume will also be displayed if the timer is turned on below M Turn the timer on 1 Select the music source and set the desired volume 2 Press SETUP repeatedly to select TIMER SET and then press OK 3 Press A V to select SET and then press OK e is displayed Press to turn the unit off A
43. on Version 2 0 WEP not support E TERMINAL SECTION iPod Connector DC OUT 5 V 1 0 A MAX Phone jack Terminal Stereo 3 5 mm 8 jack CJ e Specifications are subject to change without notice Mass and dimensions are approximate e Total harmonic distortion is measured by a digital spectrum analyzer Unit and media care Pull out the AC power plug from the outlet before maintenance Clean this unit with a soft dry cloth e When dirt is heavy wring a cloth moistened in water tightly to wipe the dirt and then wipe it with a dry cloth e When cleaning the speaker covers use a fine cloth Do not use tissues or other materials towels etc that can fall apart Small grains may get stuck inside the speaker cover e Never use alcohol paint thinner or benzine to clean this unit e Before using chemically treated cloth carefully read the instructions that came with the cloth MW Maintenance of the lens Licenses e Clean the lens regularly to prevent malfunctions Use a blower to remove dust and a cotton swab if it is extremely dirty e You cannot use a CD type lens cleaner e Do not leave the sliding door open for prolonged periods of time This will cause the lens to get dirty e Be careful not to touch the lens with your fingers Made for JiPod iPhone AirPlay Made for iPod and Made for iPhone mea
44. pe battery 1 While pressing the stopper 2 Set the button type battery pull out the battery holder with its mark facing upward and then put the battery holder back in place Si y z Keep the button type battery out EN Ss N of reach of children to prevent Battery type CR2025 Lithium battery swallowing e The battery should normally last about 1 year however this depends on how frequently the unit is used Main unit pee eee eee eee ee ee eeeey 1 Standby on switch O I i Top view i Press to switch the unit from on to standby mode or vice versa In standby mode the unit is still consuming a small amount of power Open close the sliding door for iPod iPhone Select the audio source Basic playback control buttons Adjust the volume 0 min to 50 max Open close the sliding door for discs WPS pairing button gt 9 Headphone jack Plug type 3 5 mm 1 s stereo Recommended plug type Straight Plug e To prevent hearing damage avoid listening for prolonged periods of time Excessive sound pressure from earphones and headphones can cause hearing loss 9 Standby indicator 10 Wi Fi status indicator 11 Display 12 Sliding door 13 Remote control signal sensor Distance Within approx 7 m 23 ft directly in front e To avoid interference please do not put any objects in front of signal sensor 0 Y 00420NnN RQT9708 Attaching the unit to a wall optional Installation acc
45. pts no responsibility for the loss of data and or information Charging the iPod iPhone The iPod iPhone will start being charged once connected to this unit e In standby mode IPOD CHARGING is shown on the main unit s display e Check the iPod iPhone to see if the battery is fully charged Once fully recharged additional recharging will not occur Compatible CD e A disc with the CD Logo COMPACT DIGITAL AUDIO e This unit can play back discs that conform to the CD DA format e The unit may not be able to play some discs due to the condition of the recording e This unit cannot play back MP3 files Note about using a DualDisc e The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio CD DA format so play may not be possible e Do not use a DualDisc in this unit as it may not be possible to insert it correctly and it may get scratched or scraped Control reference guide Remote control 1 Turn this unit on or off 8 Mute the sound 2 Select the audio source Mutes the sound Press again to 3 Basic playback control buttons a tas id 4 Enter setup men unit is turned off 5 Enter the iPod iPhone menu Enter playback men Change displayed information 10 Enter sound menu 3 6 Open close the sliding door J 11 Selection OK D 7 Adjust the volume gt wW E Preparation Remove the insulation sheet before using E To replace a button ty
46. rom standby mode when this unit is selected as the AirPlay speakers Preparation Connect this unit to the wireless network gt 9 1 Press SETUP repeatedly to select NET STNBY and then press OK 2 Press A VW to select ON and then press OK I 9 l o zZ i LO e To cancel this function select OFF in step 2 e The factory preset is OFF If this function is set to ON the standby power consumption will increase IP MAC Address To check the unit s IP MAC address 1 Press CD to select CD 2 Press and hold WPS on the unit and Y on the remote control until the unit s display shows the IP address L The IP address is partially displayed e To display the MAC address on the unit repeat the steps above by replacing V with A 3 Press A V on the remote control to show the rest of the IP address Li e Be sure to remove the disc from the disc tray when checking the address e The displayed on the top or bottom left of the display indicate the first and last units respectively RQT9708 Troubleshooting Before requesting service make the following checks If you are in doubt about some of the check points or if the solutions indicated in the following guide do not solve the problem refer to Customer Services Directory United States and Puerto Rico on page 22 if you reside in the U S A or Puerto Rico or refer to Limited Warra
47. se visit http www panasonic com help or call 1 800 211 PANA 7262 When shipping the unit carefully pack include all supplied accessories listed in the Owner s Manual and send it prepaid adequately insured and packed well in a carton box When shipping Lithium lon batteries please visit our Web Site at www panasonic com BatteryHandling as Panasonic is committed to providing the most up to date information Include a letter detailing the complaint a return address and provide a daytime phone number where you can be reached A valid registered receipt is required under the Limited Warranty IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT PROOF OF PURCHASE INDICATING DATE OF PURCHASE AMOUNT PAID AND PLACE OF PURCHASE CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship and DOES NOT COVER normal wear and tear or cosmetic damage The warranty ALSO DOES NOT COVER damages which occurred in shipment or failures which are caused by products not supplied by the warrantor or failures which result from accidents misuse abuse neglect mishandling misapplication alteration faulty installation set up adjustments misadjustment of consumer controls improper maintenance power line surge lightning damage mod
48. sers TTY 1 866 605 1277 As of January 2012 User memo DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER RQT9708 Limited Warranty ONLY FOR CANADA Panasonic Canada Inc 5770 Ambler Drive Mississauga Ontario L4W 2T3 PANASONIC PRODUCT LIMITED WARRANTY EXCHANGE PROGRAM Panasonic Canada Inc warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to at its option either a repair your product with new or refurbished parts b replace it with a new or a refurbished equivalent value product or c refund your purchase price The decision to repair replace or refund will be made by Panasonic Canada Inc Panasonic Portable Clock Radio without Tape CD MD One 1 year Panasonic Audio Product One 1 year Panasonic DVD Product One 1 year Accessories including rechargeable batteries Ninety 90 days This warranty is given only to the original purchaser or the person for whom it was purchased as a gift of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada which product was not sold as is and which product was delivered to you in new condition in the original packaging IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE
49. twork name SSID field 2 Select the encryption method from the Security system drop down list 3 Type the password into the Password field and then select NEXT Additional settings In step 6 If your home wireless network has been setup to use specific IP Addresses Subnet Mask Default Gateway Primary DNS etc Select Advanced network settings L Input the required addresses into each field and select OK e change the settings back to DHCP select ON from the DHCP drop down list If you want to change the name of this unit that is displayed as the AirPlay speakers Select Edit STEREO SYSTEM name L gt Only ASCII characters can be used L gt Type a new name into the STEREO SYSTEM name field and select OK Lo e Enable Java and Cookies in your browser settings e To cancel this setting in the middle press to turn off the unit 1 _ stands for a digit that is unique to each set 2 Make sure that DHCP is enabled for the network setting on the iPhone 3 If you have set your wireless network to be invisible select BACK and refer to Alternative settings above Using AirPlay with this unit s speakers When this unit is on the same network as the compatible device you can select this unit as the speakers Preparation e Connect this unit to the same network as the compatible device
50. work as the device you are trying to use gt 9 e If NET STNBY is set to OFF the AirPlay compatible device cannot be connected when this unit is off e Turn off the Wi Fi setting on the AirPlay compatible device set NET STNBY to OFF gt gt 15 and then turn this unit off and on Reconnect the compatible device to the Wi Fi network and then select this unit as the AirPlay speakers again My wireless network router is WPS PBC compatible but the pairing does not work e f the network is set to be invisible the push button configuration does not work In this case either make the wireless network visible while you set up the network for this unit or use Method 2 gt 9 Playback does not start The sound is interrupted e Simultaneous use with other 2 4 GHz devices such as microwaves cordless telephones etc may result in connection interruptions Increase the distance between this unit and these devices e Do not place this unit inside a metal cabinet for it might block the Wi Fi signal e Place this unit closer to the wireless network router e f several wireless devices are simultaneously using the same wireless network as this unit try turning off the other devices or reducing their wireless network usage e If the playback stops check the playback status on the OS device or iTunes e f play does not start even though the Wi Fi status indicator lights blue and the Air

Panasonic RQT9708-1P Stereo System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents